Scribd
Upload
54 views

R B E D S: UST Ullet Ngineering ATA Heet

just for information

Uploaded by

diah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

R B E D S: UST Ullet Ngineering ATA Heet

just for information

Uploaded by

diah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RUST BULLET ENGINEERING DATA SHEET

Weight per gallon: 9.0 9.2 lb


Pigment type: Aluminum Typical Uses
Flash Point: 123o F (Flash Point is the High performance protection for steel and iron
minimum temperature at which an open applications, such as industrial, marine, farm,
flame can ignite the product.) automotive, and any place where rust is a
Volatile Organic Content (VOC): 277 problem.
g./liter
Viscosity: 380-550 cP _________________________________________
Theoretical coverage: 250-450 sq. ft.
per gal., depending on surface. Advantages of Rust Bullet
Solids by volume: 70.6% Easily applied and forgiving under less
Recommended dry film thickness: 6-7 than desirable application conditions
mils DFT (applied in 2-3 wet coats) High solids content provides the coverage
Avoid excessive films necessary to accommodate and penetrate
Temperature Resistance: irregular and rusted/corroded surfaces
314oF Continuous, 625oF for periods up Single component
to 72 hours Excellent resistance to weather and
Chemical Resistance: Excellent mechanical abuse
Recoatability: with Rust Bullet after 2- Excellent chemical resistance
72 hours. Other coatings after 24 hours Excellent abrasion resistance
Color: Metallic-Aluminum Excellent adhesion
Finish: Semi-gloss Excellent UV resistance
Cure Time: VOC compliant
Handle:1 -2 Hours
Touch: 30-60 minutes, depending on _____________________________________
ambient temperature and relative
humidity Product Description
Recoat: 2-72 hours. Cure time Single component, moisture cure
varies with relative humidity,
primer/finish
temperature and thickness of
film (24-72 hours) High solids, VOC compliant coating
Shelf Life: 2 years provided containers Extremely tough, scratch and chip
remain unopened and stored between resistant coating
50o-100oF. Color: Metallic-Aluminum
Taber Abrasion: 14,000 cycles, (1000
gram load, CS-10 wheel @ 6 mils DFT)
Intercoat Adhesion: Excellent
Suggestions for use
Avoid ingestion, contact with skin or eyes. The use of safety glasses and chemical gloves is recommended. When brushing
or rolling at elevated ambient temperatures (above 79oF) or when spraying, a self-contained breathing apparatus is
recommended. See Material Safety Data Sheet before use.
Surface Preparation
Metal must be free of loose rust, oil, grease, wax, and moisture. This may be achieved by light scraping; a detergent or
solvent wipe may be used if necessary. For more information:
RUST BULLET LLC ~ 300 Brinkby Avenue, Suite 200, Reno, NV. 800-245-1600 www.rustbullet.com ~
Information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are
beyond our control, Rust Bullet, LLC (the Company), disclaims any liability incurred in connection with the use of our products and information contained herein. No person is
authorized or empowered to make any statement or recommendation not contained herein, any such statement or recommendation so made shall not bind the Co mpany.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use. The
information is furnished upon the condition that the recipient shall make his own determination concerning suitability for his particular application.
0414

You might also like