CYBER SECURITY BASICS

A Hands-on Approach

LENGTH: 6 weeks
EFFORT: 5 - 7 hours per week
SUBJECT: Computer Science
LEVEL: Intermediate
LANGUAGE: English
VIDEO TRANSCRIPTS: English

SYLLABUS
 INTRODUCTION

Cyber Security Basics: A Hands-on Approach presents a practical cybersecurity

overview composed of 6 lectures. Theoretical explanations, essential for an appropriate
comprehension of all concepts, are supported by examples and tools to guarantee a
comprehensive learning process. After an introduction to cybersecurity to contextualize its
relevance and significance, the main well-known techniques, concepts and tools for a
cybersecurity beginner are presented.
A wide range of videos is provided to enhance the students learning experience, together
with different activities like forums, homework or self-assignments, to motivate and guide
students. The course follows a hands-on approach, thus promoting the knowledge
acquisition by personal, first-hand practical working scenarios.
In order to attract the attention of a wide community, this course is introductory in nature
and will be taught in English.

If this is your first course on edX, do not hesitate to enroll in the Demo course to get to
know the courseware: https://www.edx.org/course/demox-edx-demox-1.

OBJECTIVES

After finishing the course students will have achieved the following goals:
Basic knowledge and skills of reverse engineering.
Understand computer forensic processes and some managed traces.
Skills to proactively and reactively manage and monitor common cybersecurity
attacks.
Understand how malware works, how can it become persistent and how it can be
detected.
Skills to identify and manage common vulnerabilities.
Basic knowledge and skills of penetration testing.

COURSE STAFF

Lorena Gonzlez Manzano is assistant professor at Universidad Carlos III de

Madrid.
Jos Mara de Fuentes Garca-Romero de Tejada is lecturer at Universidad Carlos
III de Madrid.
Pedro Peris Lpez is lecturer at Universidad Carlos III de Madrid.
Juan M. Estvez Tapiador is associate professor at Universidad Carlos III de
Madrid.
Jos Ren Fuentes Cortez, is assistant professor at Universidad Carlos III de
Madrid.

The participation of each member is scheduled as follows considering that S = Supervision,

CC= Content Creation, SG = Student guidance and CM=community manager:

1
Lectures Lorena Jos Mara de Jos Ren Pedro Juan M.
Gonzlez Fuentes Fuentes Peris Estvez

1 S, CM CC, SG

2 S, CC, CM

3 S, CM SG CC

4 S CM CC, SG

5 S CC, SG, CM

6 S, CC, SG CM

COURSE STRUCTURE

Lecture 1. Cybersecurity: an overview

This lecture introduces the impact of cybersecurity nowadays, as well as some examples of
cyberthreats that motivate the relevance of this area of study. In particular, the emergence
of cybersecurity from the beginning of the internet development is firstly introduced.
Types of cyberthreats, such as cybercrime or cyberwarfare, are later described, together
with an overview of the current cyberthreat landscape. Finally, some well-known
cybersecurity events are presented, like Ashley Madison database attack or hacked Chrysler
cars.

Lecture structure:

Cybersecurity landscape and history

Cyberthreats: definition and types

Well-known recent cybersecurity events.

Lecture 2. Computer forensics

This lecture introduces computer forensics, that is the technique focused on the analysis
and preservation of evidences in a particular computer device after an attack occurs.
Secondly, common forensic traces are defined. In particular, studied traces refer to deleted
files and hidden data. Additionally, tools to deal with these traces are also introduced.
Finally, Autopsy, a tool to manage forensic cases as a whole, is presented.

Lecture structure:

Basic concepts of computer forensics

2
Common forensic traces.

Description of forensic report writing.

Practical case.

Lecture 3. Assembly programming: towards reversing

This lecture introduces the main concepts of reverse engineering, that is, the ability to take
an executable element and try to figure out how it works. Firstly, the definition of this
technique is described, as well as the relevance of its use. Secondly, the description of
computer memory and the explanation of computer instructions are described, which are
considered the main basic concepts of reversing. Thirdly, the distinction between
decompiling and disassembling is introduced. After some theoretical knowledge, examples
of decompiling codes in different languages, namely Java and C, are presented. The
required tools for this action will be easily presented. Similarly, some disassembly examples
are also described together with the introduction of a common assembler tool, IDAPro.
Given the difficulty of disassembly, there are various examples to show assorted assembly
features.

Lecture structure:

Definition of reverse engineering and the necessity of assembly programming.

Computer memory description.

Decompiling and disassembling.

Disassembling in a x86 architecture.

Lecture 4. Cyberdefense

This lecture presents the main concepts of cyberdefense. After an introduction to this
topic, firewalls are outlined. Their definition and their main uses are explained to later
introduce one of the most common firewalls tools for Linux, IPTABLES. Main features of
this tool and examples to illustrate its use are described. The following part involves the
description of Intrusion Detection Systems (IDSs), being focused on SNORT tool.
Likewise, examples are proposed to show the essential features of SNORT. Finally,
Security Information and Event management (SIEM) systems, which refer to a general
approach to manage cyberdefense, are presented.

Lecture structure:

Definition and introduction to cyberdefense.

Definition and introduction to firewalls.

Definition and introduction to Intrusion Detection Systems (IDSs).

Definition and introduction to Security Information and Event management (SIEM)

systems.

3
Lecture 5. Malware and Advanced Persistent Threats (APTs)

This lecture explains the main concepts related to malware and Advanced Persistent
Threats (APTs), together with the main techniques to achieve their identification. Firstly,
the definition and types of malware are presented. Secondly, tools to perform malware
analysis are described. Finally, APTs are introduced and some APTs real cases are outlined.

Lecture structure:

Definition of malware and types.

Definition of Advanced Persistent Threats (APTs).

Lecture 6. Vulnerabilities and exposures

This last lesson presents vulnerabilities description and management. It presents the
description and examples of the most common vulnerabilities at software, network and
web level. Specifically, at software level, segmentation faults, race conditions and input
validation vulnerabilities are described; at network level, password sniffing, session
hijacking and denial of service attacks are introduced; and at web level, Cross Site Scripting
(XSS), SQL Injection and the disclosure of too much information vulnerabilities are
described. After the introduction of common vulnerabilities, the definition, use and
application of penetration testing (pentesting) are explained. Besides, Metasploit, one of the
most well-known tools to perform pentesting, is introduced. Finally, the necessity of
vulnerability repositories and the presentation of the most common one, Common
Vulnerabilities and Exposures (CVE) developed by MITRE corporation, are presented.

Lecture structure:

Definition of common vulnerabilities and exposures.

Introduction to common software vulnerabilities.

Introduction to common network vulnerabilities.

Introduction to common web vulnerabilities.

Pentesting with Metasploit.

Presentation of vulnerability repositories: Common Vulnerabilities and Exposures (CVE).

COURSE METHODOLOGY

Each lecture is composed of a set of videos that describe all proposed topics. Some videos
describe theoretical content and some others present examples of applied tools and
techniques. Moreover, given the hands-on focus of this course, all topics are reinforced
with practical assignments with growing hardness. For these assignments, applied tools are
open source and the installation of all required software will be appropriately guided. It
guarantees the successfulness of the learning process achieving that all established exercises
are properly completed.
Multiple supportive materials are also included in each lecture to guide students in the
learning process. In sum, the following teaching items are noticed:

4
 Videos explain all theoretical and practical content students have to learn in each
different lecture.
Additional readings refer to material provided by teachers, namely articles, news,
etc. which are convenient to identify the relationship between theoretical contents
and what is happening in the world. Moreover, after readings, some graded
questions are presented.
Homeworks refer to exercises that students have to do on their own to complete
knowledge of a specific topic. Answers will be provided, being some of them
presented in the form of videos. However, we do not recommend accessing to
solutions until having done each homework.
Knowledge check is equivalent to an exam, that is, a set of questions to check the
knowledge of some content of the course.
Additional materials, such as application manuals, guides, links to useful websites,
etc.

The estimated time learners need to complete each week is from 5 to 7 hours.

COMMUNICATION WITH LEARNERS

The COURSE INFO PAGE will be used to keep the students up to date in all the relevant
aspects of the course.

Learners community FORUM will be used to encourage engagement and interaction with
students.

Weekly EMAILS will be used to keep students up-to-date with the course development.

Follow us on TWITTER with the hashtag #CyberSecurityedX

EVALUATION

There are 8 EXAMS:

1 final exam: at the end of the course there is a final assessment that is graded
the 20% of the total grade.
7 partial exams: one per week except for week 1, where 2 assessments are
included. The total weight of these 7 exams is 60% of the total grade of the
course.

Besides, there are 10 READINGS that are followed by some graded questions. The
readings are graded the 20% of the total grade.

5
The summary of exams and readings in each lecture is presented in the following table:

WEEK CONTENTS Marks of Marks of

exams readings

Lecture 1. Cybersecurity: an overview 5%

1
Lecture 2. Computer forensics 5% 2%

2 Lecture 3. Assembly programming: 10% 2%

towards reversing

3 Lecture 4. Cyberdefense 10% 6% (3 x 2%)

4 Lecture 5. Malware and Advanced 10% 4% (2 x 2%)

Persistent Threats (APTs)

5 Lecture 6. Vulnerabilities and exposures 10% 4% (2 x 2%)

(part 1)

6 Lecture 6. Vulnerabilities and exposures 10% 2%

(part 2)

6 Final Exam 20%

Passing the course requires obtaining 60% of the final grade.

This course also includes non graded activities: a variety of self-assessments (called
knowledge checks) and homeworks. Though these activities are not part of the
assessment process, they contribute to the learning experience.

CALENDAR

The course Cyber Security Basics: A Hands-on Approach starts on 14 March. The time
of the course is always UTC (Coordinated Universal Time). The weekly content will be
posted on the Course, together with the activities and additional material, on Tuesdays.

The course will finish on 10 May (23:59 UTC). Certificates will be issued after this date.
Evaluation activities will be available until the end of the course.

RELEASE
WEEK CONTENTS
DATES

Presentation
Lecture 1. Cybersecurity: an overview
1 14 March
Test (graded)
Lecture 2. Computer forensics

6
 Reading (graded)
Test (graded)

Lecture 3. Assembly programming: towards reversing

2 21 March Reading (graded)
Test (graded)

Lecture 4. Cyberdefense
3 28 March 3 Readings (graded)
Test (graded)

Lecture 5. Malware and Advanced Persistent Threats

(APTs)
4 4 April
2 Readings (graded)
Test (graded)

Lecture 6. Vulnerabilities and exposures (part 1)

5 11 April 2 Readings (graded)
Test (graded)

Lecture 6. Vulnerabilities and exposures (part 2)

Reading (graded)
6 18 April
Test (graded)
Final exam (graded)