Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.

com

Fluke 117
Electricians Multimeter
with Non-Contact Voltage
Technical Data

Compact true-rms meter for

commercial applications
The Fluke 117 is the ideal meter for
demanding settings like commercial
buildings, hospitals and schools. The 117
includes integrated non-contact voltage
detection to help get the job done faster.

Features include:
VoltAlert technology for non-contact voltage detection
AutoVolt automatic ac/dc voltage selection
LoZ: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
True-rms for accurate measurements on non-linear loads
Measures 10 A (20 A overload for 30 seconds)
Resistance, continuity, frequency and capacitance
Min/Max/Average to record signal fluctuations
Compatible with optional magnetic hanger (ToolPak) for
hands free operation
CAT III 600 V safety rated

General specifications
Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 C to 28 C, with relative humidity at
0 % to 90 %.
The accuracy specifications take the form of:
( [ % of reading ] + [ counts ] )
Maximum voltage between any 600 V
terminal and earth ground
Surge protection 6 kV peak per IEC 61010-1 600 V
Actual size CAT III, Pollution Degree 2
Fuse for A input 11 A, 1000 V FAST Fuse
(Fluke PN 803293)
Display Digital: 6,000 counts, updates 4/sec
Bar graph 33 segments, updates 32/sec
Operating temperature -10 C to + 50 C
Storage temperature -40 C to + 60 C
Battery 9 volt Alkaline, NEDA 1604A/
R
IEC 6LR61
N10140
Battery life 400 hours typical, without backlight
Accuracy specifications
Measurement Range Resolution Accuracy ([% of reading] + [counts])
Ordering
DC millivolts 600.0 mV 0.1 mV 0.5 % + 2 information
DC volts 6.000 V 0.001 V
60.00 V 0.01 V 0.5 % + 2 Fluke-117 Electricians
600.0 V 0.1 V Multimeter with
Non-Contact Voltage
Auto volts 600.0 V 0.1 V 2.0 % + 3 (dc, 45 Hz to 500 Hz)
4.0 % + 3 (500 Hz to 1 kHz) Included
TL75 Test leads, holster, Users
AC millivolts1 600.0 mV 0.1 mV 1.0 % + 3 (dc, 45 Hz to 500 Hz)
true-rms 2.0 % + 3 (500 Hz to 1 kHz) manual and 9 V battery (installed).
AC volts1 true-rms 6.000 V 0.001 V
1.0 % + 3 (45 Hz to 500 Hz)
60.00 V 0.01 V
2.0 % + 3 (500 Hz to 1 kHz)
600.0 V 0.1 V
Continuity 600 1 Beeper on < 20 off > 250 ; detects
opens or shorts of 500 s or longer.
Ohms 600.0 0.1 0.9 % + 2
6.000 k 0.001 k
60.00 k 0.01 k
0.9 % + 1
600.0 k 0.1 k
6.000 M 0.001 M
40.00 M 0.01 M 1.5 % + 2
Diode test 2.000 V 0.001 V 0.9 % + 2
Capacitance 1000 nF 1 nF
10.00 F 0.01 F 1.9 % + 2
100.0 F 0.1 F
9999 F 1 F
100 F to 1000 F 1.9 % + 2
> 1000 F 5 % + 20
Lo-Z capacitance 1 nF to 500 F 10 % + 2 typical
AC amps true-rms 6.000 A 0.001 A
(45 Hz to 500 Hz) 1.5 % + 3
10.00 A 0.01 A
20 A overload for 30 seconds max.
DC amps 6.000 A 0.001 A
1.0 % + 3
10.00 A 0.01 A
20 A overload for 30 seconds max.
Fluke. Keeping your world
Hz (V or A input)2 99.99 Hz 0.01 Hz up and running.
999.9 Hz 0.1 Hz
0.1 % + 2
9.999 kHz 0.001 kHz
50.00 kHz 0.01 kHz
Notes:
1 All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.

Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-
zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of 3
at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.
2 Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.

 Fluke Corporation 117 Electricians Multimeter with Non-Contact Voltage