Scribd
Upload
108 views1 page

Novotek-Aluminum Paste TDS.

This technical data sheet provides information on aluminum paste material GLS65, including its silver powder appearance, composition of at least 65% solid powder and 90% activated aluminum, and fast water dispersion. The product has specifications for sieve residue rate and gas release rates at 4, 16, and 30 minutes. It is intended as an additive for autoclaved aerated concrete blocks, with a recommended dosage of 0.5-0.7kg per cubic meter. The data is as of an August 2, 2017 test and is subject to technical changes by the manufacturer.

Uploaded by

Maria Aiza Maniwang Calumba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views1 page

Novotek-Aluminum Paste TDS.

This technical data sheet provides information on aluminum paste material GLS65, including its silver powder appearance, composition of at least 65% solid powder and 90% activated aluminum, and fast water dispersion. The product has specifications for sieve residue rate and gas release rates at 4, 16, and 30 minutes. It is intended as an additive for autoclaved aerated concrete blocks, with a recommended dosage of 0.5-0.7kg per cubic meter. The data is as of an August 2, 2017 test and is subject to technical changes by the manufacturer.

Uploaded by

Maria Aiza Maniwang Calumba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

technical data sheet

Date of testing 02.08.2017/08:28:18


page/of 1/1

material description aluminum paste


material type GLS65
application additive for autoclaved aerated concrete
dosage guidance 0.5-0.7Kg for 1 cubic meters block

specification
Type: GLS65
Appearance: Silver powder
Solid powder: 65%
Activated aluminum: 90%
Water Dispersion Fast
Sieve residue rate with 0.075mm 3.0%
Gas release rate: 4min 60%
16min 90%
30min 99%

The Data on this technical information sheet correspond with the current status
of our knowledge and experience.
The liability for the application and processing of our products lies with the buyer,
and he is also responsible for observing any third party rights.
We reserve the right to alter any product data as a result of technical progress or
further developments in the manufacturing process.

Novotek Machinery Co., Limited


quality control department

You might also like