Scribd
Upload
125 views4 pages

PB Hatelit BL

katalozi geosintetici

Uploaded by

jasbojanot
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views4 pages

PB Hatelit BL

katalozi geosintetici

Uploaded by

jasbojanot
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Asphalt Reinforcement with HaTelit BL

Product of Choice for Repair of Small Areas and Individual Cracks


2

HaTelit BL: Self-adhesive reinforcement grid for


rehabilitation of asphalt and concrete pavements

HUESKER's asphalt reinforcement grids are used to rehabilitate asphalt


and concrete pavements. HaTelit BL, a further development of our tried-
and-tested HaTelit reinforcement grid, is particularly suitable for repairing
small areas and individual cracks. Made from high-modulus polyester yarn
laminated with a bitumen sheet, the flexible, high-tensile, self-adhesive grid
contributes to the active retardation of reflective cracking.

In addition to its reinforcing action, HaTelit BL through the bonded


bitumen backing also performs a sealing function and helps to relieve
stresses. This prevents the infiltration of moisture into the lower asphalt
layers while reducing stresses caused by temperature changes and traffic
loads.

HUESKER's asphalt reinforcement grids offer an effective means of


extending the service life of roads and pavements. They help to lengthen
the service intervals, thereby achieving an appreciable reduction in the
necessary maintenance works and associated costs.

The advantages of HaTelit BL

HaTelit boasts a long track record in the rehabilitation


of asphalt pavements
Straightforward installation, with rolls cut to size on site
Active retardation of reflective cracking
Extension of pavement service life
Appreciable reduction in maintenance costs

Applications

Repair of cracks in asphalt pavements


Ideal for small areas of up to around 500 m2
Targeted repair of individual cracks
3

HaTelit BL offers much more

No need for additional spraying with bitumen emulsion


(Layer thickness equivalent to approx. 1 kg bitumen per m2)
Reduced effort thanks to fewer site operations and lower
plant requirement
Direct laying on level or milled base
Strong bond with asphalt due to bitumen content of the
grid coating > 50%
Reinforcing and stress-relieving function

Simple installation in only five steps:

1. Place HaTelit BL roll in correct position for


unrolling (over middle of crack or joint).

2. Unroll approx. 50 cm of sheet and


carefully peel off release film, gently serve our
Please also ob L
pulling the self-adhesive grid. it B
detailed HaTel
n gu id el ines when
installatio
the product.
incorporating

3. Fold back release film under roll, apply


exposed bitumen backing to base and
press down. Then proceed to
unroll grid.

4. Pull release film upwards and unroll


HaTelit BL in direction of laying. Then
press down full surface of grid using
broom or roller.

5. At end of laying section, carefully cut off


grid from roll with sharp knife.

FURTHER DETAILS

HaTelit BL is mainly used for the repair of small areas and individual cracks. For further information
on the product's properties, applications and technical features, please contact us or visit our
website at www.HUESKER.com.
06/14 B Copyright by HUESKER Synthetic GmbH, Gescher

Further
Information:
HUESKER Synthetic GmbH

Fabrikstrasse 13-15
D-48712 Gescher, Germany
Phone: +49 (0) 25 42 / 7 01-0
Fax: +49 (0) 25 42 / 7 01-499
E-mail: [email protected]
Internet: www.HUESKER.com

You might also like