Scribd
Upload
34 views

Shake Table-Model Analysis

This report summarizes the results of a modal analysis simulation performed on a shake table model. The model was analyzed in Autodesk Inventor 2011. Eight modes were computed between 150-362 Hz. Tables of frequency values and displacement plots are included for each of the first eight modes. The model properties like mass, volume, center of gravity are also reported.

Uploaded by

Saurabh Pednekar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Shake Table-Model Analysis

This report summarizes the results of a modal analysis simulation performed on a shake table model. The model was analyzed in Autodesk Inventor 2011. Eight modes were computed between 150-362 Hz. Tables of frequency values and displacement plots are included for each of the first eight modes. The model properties like mass, volume, center of gravity are also reported.

Uploaded by

Saurabh Pednekar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

Report for model analysis

Report for model analysis


Analyzed File: S h a k e _ t able.ipt Autodesk
Inventor Version: 2011 (Build 150239000, 239) Creation
Date: 21-01-2016, 14:56
Simulation Author:

Project Info (iProperties)

Physical
Material Steel
Density 7.85 g/cm^3
Mass 721.45 kg
Area 18995300 mm^2
Volume 159558000 mm^3
x=-0.0129019 mm
Center of Gravity y=5.54577 mm
z=-83.2857 mm
Note: Physical values could be different from Physical values used by FEA reported below.

Frequency
General objective and settings:
Design Objective Parametric Dimension
Simulation Type Modal Analysis
Last Modification Date 21-01-2016, 14:56
Number of Modes 8
Frequency Range Undefined
Compute Preloaded Modes Yes
Enhanced Accuracy Yes

Advanced settings:
Avg. Element Size (fraction of model diameter) 0.1
Min. Element Size (fraction of avg. size) 0.2
Grading Factor 1.5
Report for model analysis

Max. Turn Angle 60 deg


Create Curved Mesh Elements Yes

Material(s)
Name Steel
Mass Density 7.85 g/cm^3
General Yield Strength 207 MPa
Ultimate Tensile Strength 345 MPa
Young's Modulus 210 GPa
Stress Poisson's Ratio 0.3 ul
Shear Modulus 80.7692 GPa
Expansion Coefficient 0.000012 ul/c
Stress Thermal Thermal Conductivity 56 W/( m K )
Specific Heat 460 J/( kg c )
Part Name(s) Table-for analysis.ipt

Operating conditions

Fixed Constraint:1
Constraint Type Fixed Constraint

Selected Face(s)
Report for model analysis

Results

Parametric Configuration:1

Frequency Value(s)
F1 150.69 Hz
F2 160.08 Hz
F3 263.57 Hz
F4 270.62 Hz
F5 271.19 Hz
F6 274.02 Hz
F7 294.62 Hz
F8 362.44 Hz

Result Summary
Name Result Value
Volume 159558000 mm^3
Mass 721.45 kg

Figures
Report for model analysis

F1 150.69 Hz Displacement

F1 150.69 Hz X Displacement

F1 150.69 Hz Y Displacement
Report for model analysis

F1 150.69 Hz Z Displacement

F2 160.08 Hz Displacement
Report for model analysis

F2 160.08 Hz X Displacement

F2 160.08 Hz Y Displacement
Report for model analysis

F2 160.08 Hz Z Displacement

F3 263.57 Hz Displacement
Report for model analysis

F3 263.57 Hz X Displacement

F3 263.57 Hz Y Displacement
Report for model analysis

F3 263.57 Hz Z Displacement

F4 270.62 Hz Displacement
Report for model analysis

F4 270.62 Hz X Displacement

F4 270.62 Hz Y Displacement
Report for model analysis

F4 270.62 Hz Z Displacement

F5 271.19 Hz Displacement
Report for model analysis

F5 271.19 Hz X Displacement

F5 271.19 Hz Y Displacement
Report for model analysis

F5 271.19 Hz Z Displacement

F6 274.02 Hz Displacement
Report for model analysis

F6 274.02 Hz X Displacement

F6 274.02 Hz Y Displacement
Report for model analysis

F6 274.02 Hz Z Displacement

F7 294.62 Hz Displacement
Report for model analysis

F7 294.62 Hz X Displacement

F7 294.62 Hz Y Displacement
Report for model analysis

F7 294.62 Hz Z Displacement

F8 362.44 Hz Displacement
Report for model analysis

F8 362.44 Hz X Displacement

F8 362.44 Hz Y Displacement
Report for model analysis

F8 362.44 Hz Z Displacement

E:\PROJECTS\Uni axial Shake table\3D models\Table-for analysis.ipt

You might also like