Scribd
Upload
99 views3 pages

Length Power Dynamic Viscosity Heat Flux

This document provides conversion factors between common units used to measure various process engineering quantities such as length, power, viscosity, heat flux, volume, energy, flow rates, density, pressure, area, and thermal conductivity. It includes units like km, hp, centipoise, Btu/hr-ft^2, ft^3, kCal, lb-mol/hr, gr/cm^3, kPa, ft^2, and Btu/hr-ft-F. The values provided allow direct conversion between these different units of measurement.

Uploaded by

Mohan Saravana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
99 views3 pages

Length Power Dynamic Viscosity Heat Flux

This document provides conversion factors between common units used to measure various process engineering quantities such as length, power, viscosity, heat flux, volume, energy, flow rates, density, pressure, area, and thermal conductivity. It includes units like km, hp, centipoise, Btu/hr-ft^2, ft^3, kCal, lb-mol/hr, gr/cm^3, kPa, ft^2, and Btu/hr-ft-F. The values provided allow direct conversion between these different units of measurement.

Uploaded by

Mohan Saravana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Length 1 Power Dynamic Viscosity Heat Flux

km 1 hp 1 gr / cm3
centipoise 1 Btu / hr . ft2 1
mm 1000000 kW 0.7456999 lb / ft . sec 0.000671969 watt / m2 3.154591

Volume Energy Kinematic Viscosity Specific Energy


ft 3 183 kCal 1 centistoke 1 Btu / lb 1
m3 5.18198355 joule 4184.000596 m2 / sec 0.000001 joule / kg 2326

Molar Flowrate Mass Mass Flowrate Specific Heat


lb-mol / hr 1 lb 2.203 lb / hr 1 Btu / lb . F 1
Mscf / hr 0.3786675 kg 0.999274245 kg / min 0.007559873 joule / kg . C 4186.8

Volumetric Flowrate Density Heat Transfer Coefficient


ft 3 / min 183 gr / cm3 7.97 Btu / hr . ft2 . F 1
m 3 / hr 310.919135 kg / m3 7970 watt / cm2 . C 0.000567826

Pressure Area Thermal Conductivity


kPa 100 ft2 23400 Btu / hr . ft . F 1 PROCESS ENGINEERING TOOLKIT
kg / cm2 1.019716286 m2 2173.931136 watt / cm . C 0.01730735 PROCESS & CONTROL SYSTEMS DEPT.

UPSTREAM PROCESS ENGINEERING

UNIT CONVERSION PROGRAM

Please contact [email protected] if you have any suggestions to improve this program.
Value ata
ata 1 1
kg/cm2(a) 1 1
bar(a) 1 1.0197163

1 N/m2 = 1 Pa = 1.4504x10-4 lbf/in2 (psi) = 0.02089 lbf/ft2 (psf) = 1x10-5 bar = 4.03x10-3 in water =
7.55x10-3 mm mercury = 0.1024 kp/m2 = 0.993x10-5 atm
kg/cm2(a) bar(a)
1 0.980665
1 0.980655
1.0197163 1

9 lbf/ft2 (psf) = 1x10-5 bar = 4.03x10-3 in water = 0.336x10-3 ft water = 0.1024 mm water = 0.295x10-3 in mercury =
0-5 atm

You might also like