Parts Sales Kit

Undercarriage
6th Edition - Vol I
 Undercarriage Parts Sales Kit
TABLE OF CONTENTS

Undercarriage
MODELS PAGE NO.

Introduction..................................................................................................................2
Elevated Sprocket Tractors......................................................................................... 3
Skidders.................................................................................................................. 201
Low Sprocket Tractors............................................................................................ 239
Track-Type Loaders................................................................................................ 417
Classic..................................................................................................................... 575
Nexus...................................................................................................................... 589
Product Information................................................................................................. 591
Conversion Guide....................................................................................................615
Part Number Index.................................................................................................. 628

1
 Introduction
Introduction

This Caterpillar Undercarriage book is designed to provide dealer salesmen (field and instore) with part
numbers and product information as well as features and benefits for selected parts and service commodities.
It is a quick reference tool which lists part numbers and applications for items that are: new, competitive
and high in sales volume and sales potential.

The Undercarriage book should not be used as a substitute for Parts Books, Numerical Parts Record,
Parts Pricing Medium or any other formal reference publication. All part numbers, specifications and
application data published in the Undercarriage book are subject to change without notice. Any information
taken from this publication for use in preparing a Parts Sales Order or Price Quotation should
always be verified against the Numerical Parts Record in accordance with the Management
Partsgram entitled “The Numerical Parts Record.”

2
 Elevated Sprocket Tractors
INDEX

Elevated Sprocket Tractors

MODELS PAGE NO.

D5N, D5M, D4H, 561N, 561M, 561H.......................................................................... 4

D6N, D6M, D5H........................................................................................................ 35
D6T, D6R, D6H......................................................................................................... 63
D7R, D7H, 572R..................................................................................................... 114
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578...................................................... 144
D8L.......................................................................................................................... 160
D9L, 589.................................................................................................................. 166
D9T, D9R, D9N....................................................................................................... 172
D10T, D10R, D10N................................................................................................. 180
D10.......................................................................................................................... 188
D11T, D11R, D11N................................................................................................. 193

3
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H SystemOne™ TRACK

PRESS FIT MASTER LINK
D5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP

D5N/M LGP, D4H LGP, (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP,
7LR1-UP, AKD1 UP, CKT1-UP
6.75" (171.5 mm) PITCH - 16 mm BOLT

PART XL LGP
NUMBER 41 Section 44 Section
Link Assembly -- (Quantity 2) 312-2273 312-2270
Components of Link Assembly
Link Box Standard 312-2269 1 19 22
Link Box Offset 312-2271 2 1 --
Standard Link 235-2514 38 42
3
Standard Link (Press Fit) 235-2514 2 2
Track Hardware 3
Bolt (M16) 218-3274 164 176
Nut 5I-6125 164 176
1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.
2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.
3 Not part of link assembly; required to assemble track group.

D5N, D5M, D4H SystemOne™ TRACK

CLAMP MASTER
D5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP

D5N/M LGP, D4H LGP, (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP,
7LR1-UP, AKD1 UP, CKT1-UP
6.75" (171.5 mm) PITCH - 16 mm STANDARD BOLT 18 mm MASTER BOLT

PART XL LGP
NUMBER 41 Section 44 Section
Link Assembly -- 41 Section 312-2273 312-2270
Components of Link Assembly
Link Box Standard 312-2269 1 19 22
Link Box Offset 312-2271 2 1 --
Standard Link 235-2514 38 42
3
Clamp Master Link 235-2620 2 2
Track Hardware 3
Bolt (M16) 218-3274 160 172
Nut 5I-6125 160 172
Track Master Bolt (M18) 254-0227 4 4 4
1Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.
2Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.
3Not part of link assembly; required to assemble track group.
4It is recommended that track bolt 254-0227 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and /or bolt
breakage.

4
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, XL SystemOne PRESS FIT MADE TO ORDER (MTO) TRACK GROUPS
TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 235-2526
Extreme Service Shoe - 22" (560 mm) 2 246-5738

D5N, D5M, LGP SystemOne PRESS FIT MADE TO ORDER (MTO) TRACK GROUPS
TRACK GROUPS NOT STOCKED IN DISTRUBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 298-3698
Moderate Service Shoe - 30" (760 mm) 2 235-2528

5
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H, 561N, 561M, 561H, HEAVY DUTY SEALED AND LUBRICATED TRACK 1
D4H STD (39 SECTION): 2AC5597-UP, 8PB6091-UP

D5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP

D5N/M LGP, D4H LGP, 561N/M/H (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP,
5FS1-UP, 7LR1-UP, 6NL383-UP, AKD1 UP, CKT1-UP, 1KW1-UP, 1CPH-UP
6.75" (171.5 mm) PITCH - 5/8" BOLT

PART STD XL LGP

NUMBER 39 Section 41 Section 44 Section
Link Assembly -- (Quantity 2) 108-0953 108-0955 108-0954
Track Links
RH Pin End Master 108-0949 1 1 1
LH Pin End Master 108-0950 1 1 1
RH Bushing End Master 108-0951 1 1 1
LH Bushing End Master 108-0952 1 1 1
RH Regular 108-0947 38 40 43
LH Regular 108-0948 38 40 43
Other Components
Pin 108-0943 39 41 44
Bushing 108-0944 39 41 44
Seal Assembly (Rigid) 250-3992 78 82 88
Thrust Ring 152-8069 78 82 88
Stopper 5G-2247 39 41 44
Plug 6Y-0473 39 41 44
2
Track Hardware
Bolt 9G-3110 152 160 172
Bolt (Self-Cleaning Shoe) 9G-3110 86
Bolt (Self-Cleaning Shoe) 3T-3884 86
Nut 1M-1408 152 160 172
Master Bolt 9G-8592 2 2 2
Master Bolt 3T-8601 2 2 2
Master Bolt (Self-Cleaning Shoe) 9G-8592 2
Master Bolt (Self-Cleaning Shoe) 3T-3889 2
Special Sets/Groups
Seal Set (88 Seal Assemblies) 252-7856 1 1 1
Bushing and Seal Group (39 Sections) 115-2438 1 1 1
1 When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer to Special
Instruction SEHS9805 for additional guarding information.
2 Not part of link assembly; required to assemble track group.

D5N XL, D5M XL MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 108-0955
Moderate Service Shoe -- 22" (560 mm) 2 108-2622

6
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N LGP, D5M LGP MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 108-0954
Moderate Service Shoe -- 30" (760 mm) 2 108-2625
Extreme Service Shoe -- 30" (760 mm) 2 254-7200

D5N XL/LGP, D5M XL/LGP, D4H STD/XL/LGP ROTATING BUSHING TRACK 1

STD: 2AC5597-UP, 8P6091-UP
XL: 8PJ664-UP, 6N1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP
LGP: 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, AKD1-UP, CKT1-UP
6.75" (171.5 mm) PITCH - 5/8" BOLT

PART STD XL LGP

NUMBER 39 Section 41 Section 44 Section
Link Assembly (Quantity 2) 152-8040 152-8039 152-8038
Track Links
RH Pin End Master 108-0949 1 1 1
LH Pin End Master 108-0950 1 1 1
RH Bushing End Master 2 165-1748 1 1 1
2
LH Bushing End Master 165-1749 1 1 1
RH Regular 2 165-1746 38 40 43
LH Regular 2 165-1747 38 40 43
Other Components
Pin 152-8075 39 41 44
Bushing 165-1767 39 41 44
Seal Assembly (Rigid) 250-3992 156 164 176
Thrust Ring 152-8069 156 164 176
Stopper 5G-2247 39 41 44
Plug 6Y-0473 39 41 44
3
Track Hardware
Bolt 9G-3110 152 160 172
Nut 1M-1408 152 160 172
Master Bolt 9G-8592 2 2 2
Master Bolt 3T-8601 2 2 2
1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system or less).
When installing Rotating Bushing Track on existing machines, refer to IRM UC95-11 for installation and guarding information. Also refer to Special
Instruction SEHS9805 for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for
use on Track Skidders and 561H Pipelayers.
2 Joint assemblies (includes link and insert). Insert not serviced.
3 Not part of link assembly; required to assemble track group.

7
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H STD/XL/LGP, 561H SEALED AND LUBRICATED

LARGE STEPPED BUSHING, RIGID SEAL ASSEMBLY
D4H STD (39 SECTION): 2AC1-5596, 8PB1-6090
D4H XL (41 SECTION): 8PJ1-663
D4H LGP, 561H (44 SECTION): 3AC1-UP, 4NK1-163, 6NL1-382, 9DB1-UP, 9GJ1-1115
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART STD XL LGP

NUMBER 39 Section 41 Section 44 Section
Link Assembly -- (Quantity 2) 227-9976 228-2743 228-2744
Track Links
RH Pin End Master 6Y-9263 1 1 1
LH Pin End Master 6Y-9264 1 1 1
RH Bushing End Master 9G-8585 1 1 1
LH Bushing End Master 9G-8586 1 1 1
RH Regular 6Y-9261 38 40 43
LH Regular 6Y-9262 38 40 43
Other Components
Pin 160-7816 39 41 44
Bushing 224-3959 39 41 44
Seal Assembly 250-4000 78 82 88
Thrust Ring 6Y-6486 78 82 88
Stopper 5G-2247 39 41 44
Plug 6Y-0473 39 41 44
1
Track Hardware
Bolt (Grouser shoe) 9G-3110 152 160 172
Bolt (Self-Cleaning Shoe) 9G-3110 -- -- 86
Bolt (Self-Cleaning Shoe) 3T-3884 -- -- 86
Nut 1M-1408 152 160 172
Master Bolt (Grouser Shoe) 9G-8592 2 2 2
Master Bolt (Grouser Shoe) 3T-8601 2 2 2
Master Bolt (Self-Cleaning Shoe) 9G-8592 -- -- 2
Master Bolt (Self-Cleaning Shoe) 3T-3889 -- -- 2
Special Sets/Groups
Seal Set (88 Seal Assemblies) 252-7860 1 1 1
Bushing and Seal Group (39 Sections) 227-9954 1 1 1
1 Not part of link assembly; required to assemble track group.

8
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H STD/XL/LGP, 561H SEALED AND LUBRICATED

RIGID SEAL ASSEMBLY
D4H STD (39 SECTION): 2AC1-5596, 8PB1-6090
D4H XL (41 SECTION): 8PJ1-663
D4H LGP, 561H (44 SECTION): 3AC1-UP, 4NK1-163, 6NL1-382, 9DB1-UP, 9GJ1-1115
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART STD XL LGP

NUMBER 39 Section 41 Section 44 Section
Link Assembly -- (Quantity 2) -- 1 -- 2 -- 3
Track Links
RH Pin End Master 6Y-9263 1 1 1
LH Pin End Master 6Y-9264 1 1 1
RH Bushing End Master 9G-8585 1 1 1
LH Bushing End Master 9G-8586 1 1 1
RH Regular 6Y-9261 38 40 43
LH Regular 6Y-9262 38 40 43
Other Components
Pin 160-7816 39 41 44
Bushing 9G-8588 39 41 44
Seal Assembly 250-4000 78 82 88
Thrust Ring 6Y-6486 78 82 88
Stopper 5G-2247 39 41 44
Plug 6Y-0473 39 41 44
4
Track Hardware
Bolt (Grouser shoe) 9G-3110 152 160 172
Bolt (Self-Cleaning Shoe) 9G-3110 -- -- 86
Bolt (Self-Cleaning Shoe) 3T-3884 -- -- 86
Nut 1M-1408 152 160 172
Master Bolt (Grouser Shoe) 9G-8592 2 2 2
Master Bolt (Grouser Shoe) 3T-8601 2 2 2
Master Bolt (Self-Cleaning Shoe) 9G-8592 -- -- 2
Master Bolt (Self-Cleaning Shoe) 3T-3889 -- -- 2
Special Sets/Groups
Seal Set (88 Seal Assemblies) 252-7860 1 1 1
Bushing and Seal Group (39 Sections) -- 5 1 1 1
1 Service replaced by (1) 227-9976 link assembly and (5) 108-0946 sprocket segments.
2 Canceled and replaced by (1) 228-2743 link assembly and (5) 108-0946 sprocket segments.
3 Service replaced by (1) 228-2744 link assembly and (5) 108-0946 sprocket segments.
4 Not part of link assembly; required to assemble track group.
5 Order (1) 227-9954 Seal and Bushing Group and (5) 108-0946 sprocket segments.

9
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H STD/XL/LGP, 561H SEALED AND LUBRICATED TRACK

CRESCENT SEAL ASSEMBLY
D4H STD (39 SECTION): 2AC1-5596, 8PB1-6090
D4H XL (41 SECTION): 8PJ1-663
D4H LGP, 561H (44 SECTION): 3AC1-UP, 4NK1-163, 6NL1-382, 9DB1-UP, 9GJ1-1115
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 39 Section 2 -- 1
Track Links
RH Pin End Master 1 9G-8583
LH Pin End Master 1 9G-8584
RH Bushing End Master 1 9G-8585
LH Bushing End Master 1 9G-8586
RH Regular 38 9G-8581
LH Regular 38 9G-8582
Other Components
Pin 39 154-3664
Bushing 39 9G-8588
Seal Assembly 78 3T-5634
Thrust Ring 78 9G-8591
Stopper 39 5G-2247
Plug 39 6Y-0473
2
Track Hardware
Bolt (Grouser Shoes) 152 9G-3110
Nut 152 1M-1408
Master Bolt (Grouser Shoes) 2 9G-8592
Master Bolt (Grouser Shoes) 2 3T-8601
Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 86 9G-3110
Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 86 3T-3884
Master Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 2 9G-8592
Master Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 2 3T-3889
Special Sets/Groups
Bushing and Seal Group (39 Sections) 1 6Y-3879
1 If 39, 41, 44, section link assemblies are required upgrade to sealed and lubricated track, with rigid seals.
2 Not part of link assembly; required to assemble track group.

10
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N LGP,D5M LGP, D4H LGP HEAVY DUTY TRI/QUAD TRACK 1

3CR1-UP, 3DR1-UP, 4NK164-UP, 5FS1-UP, 6AS1-UP, 7LR1-UP, 9GJ1116-UP, AKD1-UP
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUAD TRACK TRI TRACK PART

QUANTITY QUANTITY NUMBER
Link Assembly -- 44 Section 2 2 108-0954 2
Track Links
RH Regular 44 44 3 108-0947
4
LH Regular 44 44 108-0948
Other Components
Stub Pin 88 44 108-2639
Stub Bushing 88 44 108-2640
Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri
-- 1 center chain & 1 outrigger) 5
Bolt 344 258 9G-3110
Nut 344 258 1M-1408
Master Bolt 4 3 9G-8592
Master Bolt 4 3 3T-8601
1 When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer to Special
Instruction SEHS9805 for additional guarding information. For more information about Quad or Tri Link track, refer to IRM 91-18 and special
instruction SEHS8881.
2 Refer to Heavy Duty Track section for component information.
3 Required for right hand outrigger chain.
4 Required for left hand outrigger chain.
5 Not part of link assembly; required to assemble track group.

D5N, D5M, D4H SystemOne TRACK SHOES

6.75" (171.5 mm) PITCH -- 16 mm BOLT

MASTER
SHOE PART
TYPE WIDTH PART NUMBER NUMBER
Moderate Service 18.0" (460 mm) 260-6769 255-1536
Moderate Service 20.0" (510mm) 260-6768 257-2336
Moderate Service 22.0" (560 mm) 260-6767 255-1533
Moderate Service 24.0" (610mm) 260-6766 255-1532
Moderate Service 30.0" (760 mm) 260-6765 255-1530
Extreme Service 18.0" (460 mm) 260-6773 255-1537
Extreme Service 20.0" (510 mm) 260-6772 256-4944
Extreme Service 22.0" (560 mm) 260-6771 255-1534
Extreme Service 30.0" (760 mm) 269-1133 313-4548
1
Extreme Service (Center Hole) 30.0" (760 mm) 300-0417 300-0418 1
1 Track shoe is made as ordered (MAO) (not stocked in parts distribution centers) and typically has a 6-12 week lead-time.

11
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H, 561N, 561M, 561H, TRACK SHOES

SEALED AND LUBRICATED TRACK, HEAVY DUTY TRACK, ROTATING BUSHING TRACK
6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER STD XL LGP 561H
Extreme Service 18.0" (460 mm) 6Y-5624 Y Y Y Y
Extreme Service 20.0" (510 mm) 8E-9816 N Y Y Y
Extreme Service 22.0" (560 mm) 8E-9814 N Y Y N
Extreme Service 24.0" (610 mm) 1Q-4754 N Y Y N
Extreme Service 30.0" (760 mm) 236-1870 N N Y N
Moderate Service 14.0" (355 mm) 3T-0356 Y N N N
Moderate Service 16.0" (405 mm) 3T-0358 Y N N N
Moderate Service 18.0" (460 mm) 3T-0360 Y Y N Y
Moderate Service (Center Punched) 18.0" (460 mm) 9W-3955 Y Y N N
Moderate Service 20.0" (510 mm) 8E-9812 N Y Y Y
Moderate Service 22.0" (560 mm) 8E-9810 N Y Y N
Moderate Service 24.0" (610 mm) 8E-4972 N N Y N
Moderate Service 26.0" (660 mm) 6I-9573 N N Y N
Moderate Service 30.0" (760 mm) 216-6286 N N Y N
Self-Cleaning 30.0" (760 mm) 6T-0232 N N Y N
Quad (MS) 23.0" (585 mm) 9W-7984 N N Y N
Quad (MS) 30.0" (760 mm) 9W-8326 N N Y N
Tri Offset RH (ES) 18.0" (460 mm) 8E-8526 N N N N
Tri Offset LH (ES) 18.0" (460 mm) 8E-8527 N N N N
Offset RH (MS) 22.0" (560 mm) 1Q-4631 N N N N
Offset LH (MS) 22.0" (560 mm) 1Q-4632 N N N N

D5N, D5M, D4H, 561N, 561M, 561H SPROCKETS

HEAVY DUTY, SystemOne, ROTATING BUSHING, AND SEALED AND LUBRICATED TRACK

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 108-0946
Bolt 20 3S-8182
Nut 20 7H-3607
Washer 20 6V-4316

12
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N XL, D5M XL, D4H XL, D4H IDLERS

CURRENT DESIGN (SYMMETRIC SEALS)
INCREASED TREAD WEAR LIFE

FRONT IDLER REAR IDLER

LARGE DIA. SMALL DIA.
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Idler Group 2 190-1551 190-1534
Components of Group
Idler Assembly 1 190-2495 190-1536
1
Bearing 2 8P-7002 8P-7002
Shaft 1 160-9757 160-9757
Collar 2 160-9756 160-9756
Retainer 2 160-9761 160-9761
Thrust Washer 2 137-9518 137-9518
Bolt 12 053-2294 053-2294
Washer 12 5M-2894 5M-2894
Seal -- Duo-Cone Group 2 161-7247 161-7247
Toric Ring 1 2 161-7249 161-7249
Seal -- Collar 1 5K-0216 5K-0216
Seal -- Retainer 2 2H-4145 2H-4145
Stopper 1 3T-9536 3T-9536
Plug 1 6Y-0473 6Y-0473
Mounting Hardware (D5N XL, D5M XL) 2
End Cap 2 108-1138 108-1138
Block 2 108-1136 108-1136
Bolt (16 mm) 4 8T-0282 8T-0282
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
Mounting Hardware (D4H, D4H XL) 2
End Cap 2 9N-4683 9N-4683
Block 2 9N-4680 9N-4680
Bolt (5/8") 4 1A-8651 1A-8651
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.

13
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N LGP, D5M LGP, D4H LGP, 561N, 561M, 561H IDLERS
CURRENT DESIGN (SYMMETRIC SEALS), LARGE TREAD DIAMETER
INCREASED TREAD WEAR LIFE

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 4 190-1551
Components of Group
Idler Assembly 1 190-2495
1
Bearing 2 8P-7002
Shaft 1 160-9757
Collar 2 160-9756
Retainer 2 160-9761
Thrust Washer 2 137-9518
Bolt 12 053-2294
Washer 12 5M-2894
Seal -- Duo-Cone Group (Symmetric) 2 161-7247
Toric Ring 1 2 161-7249
Seal -- Collar 2 5K-0216
Seal -- Retainer 2 2H-4145
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware (D5N LGP, D5M LGP) 2
End Cap 2 108-1138
Block 2 108-1136
Bolt (16 mm) 4 8T-0282
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
Mounting Hardware (D4H LGP, 561H) 2
End Cap 2 9N-4683
Block 2 9N-4680
Bolt (5/8") 4 1A-8651
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.

14
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H SystemOne CENTER TREAD IDLERS

XL,LGP

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 4 228-3710
Components of Group
Idler Assembly 1 228-3711
1
Bearing 2 8P-7002
Shaft 1 160-9757
Collar 2 160-9756
Retainer 2 160-9761
Thrust Washer 2 137-9518
Bolt 12 053-2294
Washer 12 5M-2894
Seal -- Duo-Cone Group (Symmetric Seal) 2 161-7247
Toric Ring 1 2 161-7249
Seal -- Retainer 2 2H-4145
Seal -- Collar 2 5K-0216
Stopper 1 3T-9536
Plug 1 6Y-0473
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D5N, D5M, XL/LGP SystemOne CENTER TREAD IDLER SCRAPER

BOLT ON SCRAPER BASE PLATES

PART
(PER MACHINE) QUANTITY NUMBER
Base Plate 4 251-8596
Base Plate 4 251-8597
Scraper 8 251-8595
Bolt (12 mm) 8 8T-4910
Bolt (12 mm) 24 8T-4183
Washer 32 7D-1649

15
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H XL/LGP SystemOne CENTER TREAD IDLER SCRAPER

WELD ON SCRAPER BASE PLATES

PART
(PER MACHINE) QUANTITY NUMBER
Hardware Idler Arrangement (Includes hardware for 4 Idler groups) 1 296-0068 1
Components of Idler Hardware Arrangement
Plate- Scraper Base (Front) (Weld on) 2 248-5304
Plate- Scraper Base (Rear) (Weld on) 2 248-5325
Side Scraper 8 254-3802
Tread Scraper (Front Only) 2 254-3801
Scraper Bolt (12mm) 28 8T-4139
Scraper Washer 28 5P-1076
Plate (Weld to track roller frame front & rear) 8 271-6117
Scraper (Bolt to plates welded to track roller frame) (Lower guards) 8 271-6118
Bolt (12mm) 24 198-4778
Washer 24 8T-4183
Shim (For XL, LGP Front Idlers) 4 254-4433
Shim (For Only LGP Rear Idlers ) 4 254-4432
Block 8 248-5326
Bolt (16mm) (For D5N/M machines) 16 6V-7675
Bolt (5/8 Inch) (For D4H machines) 16 1D-4593
Washer 16 5P-8247
End Cap 2 8 108-1138
1 This arrangement contains only metric bolts to bolt the blocks and end caps to the track roller frame for D5N/M machines. For D4H machines
must order inch bolts separately (1D-4593) to bolt the blocks and end caps to the track roller frame.
2 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

16
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5M XL, D4H XL, D4H IDLERS

FORMER DESIGN

FRONT IDLER REAR IDLER

LARGE DIA. SMALL DIA.
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Idler Group 2 -- --
Components of Group
Idler Assembly 1 190-2495 190-1536
1
Bearing 2 8P-7002 8P-7002
Shaft 1 6T-2620 6T-2620
Retainer 2 6T-2619 6T-2619
Thrust Washer 1 137-9518 137-9518
Bolt 12 053-2294 2 053-2294 3
Washer 12 5M-2894 5M-2894
Stabilizer Ring 2 7T-4030 7T-4030
Seal -- Duo-Cone Group 2 7T-4080 7T-4080
1
Toric Ring 1 8P-7003 8P-7003
1
O-Ring 1 6V-2699 6V-2699
Seal -- Retainer 2 2H-4145 2H-4145
Stopper 1 3T-9536 3T-9536
Plug 1 6Y-0473 6Y-0473
Mounting Hardware (D5M XL) 4
End Cap 2 108-1138 108-1138
Block 2 108-1136 108-1136
Bolt (16 mm) 4 8T-0282 8T-0282
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
Mounting Hardware (D4H, D4H XL) 4
End Cap 2 9N-4683 9N-4683
Block 2 9N-4680 9N-4680
Bolt (5/8") 4 1A-8651 1A-8651
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4086 7T-4086
1
Toric Ring 1 7T-4087 7T-4087
O-Ring 1 1 6V-2699 6V-2699
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use 0S-1594 bolt with former idler assembly 6T-2615
3 Use 0S-1594 bolt with former idler assembly 7T-4399.
4 These components are not included in the idler group; quantities shown are required to mount each idler.

17
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5M LGP, D5M XL, D4H, D4H LGP, D4H XL, 561H IDLERS
FORMER DESIGN, LARGE TREAD DIAMETER

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 4 --
Components of Group
Idler Assembly 1 190-2495
1
Bearing 2 8P-7002
Shaft 1 6T-2620
Retainer 2 6T-2619
Thrust Washer 2 137-9518
Bolt 12 053-2294 2
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer 2 2H-4145
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware (D5M LGP, D5M XL) 3
End Cap 2 108-1138
Block 2 108-1136
Bolt (16 mm) 4 8T-0282
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
Mounting Hardware (D4H, D4H LGP, D4H XL, 561H) 3
End Cap 2 9N-4683
Block 2 9N-4680
Bolt (5/8") 4 1A-8651
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4086
1
Toric Ring 1 7T-4087
O-Ring 1 1 6V-2699
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use 0S-1594 bolt with former idler assembly 6T-2615.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

D5N, D5M, D4H SystemOne CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 227-5971

18
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H, 561N, 561M, 561H CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Plate 1 6K-9860
Bolt 2 6V-4791
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals
Seal -- Duo-Cone Group 1 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding group; quantity shown is the quantity per group.

D5N, D5M SystemOne TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group -1 240-8933
2
Mounting Hardware
Cap 3 2 218-4993
Bolt (16 mm) 4 8T-0281
Washer 4 7X-8268
114 required for XL machines; 16 required for LGP machines.
2These components are not included in the roller group; quantities shown are required to mount each roller.
3Use special offset caps 262-7193 and 262-7194 at roller positions 2 and 7 on LGP machines (3CR1232 and Up, 3DR0464 and Up, 6AS0463 and
Up, 5FS0260 and Up, AKD0001 to AKD01361) with 8 roller frame configuration. These special offset caps repositions roller groups 2 and 7 to
provide the necessary clearance with roller groups 1 and 8.

19
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H SystemOne TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group 14 240-8933
1
Mounting Hardware
Cap 2 218-4993
Bolt (5/8 Inch) 4 1B-4367
Washer 4 5P-8247
1 These components are not included in the roller group; quantities shown are required to mount each roller.

D5N, D5M, D4H, 561H TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS), USE WITH 7 ROLLER FRAME CONFIGURATION

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 6 124-8240
Single Flange (SF) Roller Group 8 124-8237
1
Double Flange (DF, Tall Flange) Roller Group - 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 1 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
Ring (Retaining-Snap) 2 6V-6768
Ring (Lock) 2 6H-7382
End Collar 2 132-1951
Seal -- Duo-Cone Group (Symmetrical) 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware (D5M, D5N)
Bolt (16 mm) 4 8T-0357
Washer 4 5P-8247
3
Mounting Hardware (D4H, 561H)
Bolt (5/8") 4 1A-8537
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal - Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
1 Optional DF roller for guiding; use quantity required for specific roller frame type.
2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

20
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N LGP, D5M LGP, 561N, 561M TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS), USE WITH 8 ROLLER FRAME CONFIGURATION
3CR1232-UP, 3DR464-UP

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 8 124-8240
Single Flange (SF) Roller Group 8 124-8237
1
Double Flange (DF, Tall Flange) Roller Group - 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 1 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
Ring (Retaining-Snap) 2 6V-6768
Ring (Lock) 2 6H-7382
End Collar 2 132-1951
Seal -- Duo-Cone Group (Symmetrical) 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
Bolt (16 mm) 4 8T-0357
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal - Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
1 Optional DF roller for guiding; use quantity required for specific roller frame type.
2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

21
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H, 561H TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER), INCH MOUNTING HARDWARE

FORMER
PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 6 --
Single Flange (SF) Roller Group 8 --
Components of Group
Roller Shell (DF) 1 7G-4832
Roller Shell (SF) 1 7G-4833
Bearing 1 2 8P-7002
Shaft 1 8E-6573
Retainer Assembly 2 3T-9538
Thrust Washer 2 1 9G-9351
Dowel 2 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group (Inverted) 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer O-Ring 2 1H-6227
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
End Cap 2 7G-4829
Bolt (5/8") 4 1B-4367
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
1
Toric Ring 1 7T-4087
O-Ring 1 1 6V-2699
1 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
2 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

22
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, XL/LGP SystemOne END GUIDING GUARDS

METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly (RH) 2 196-7111
Guard Assembly (LH) 2 196-7112
Wear Strip 4 271-6079
Bolt (12 mm) 12 8T-4956
Washer 12 8T-4223
Rear
Guard Assembly (RH) 2 196-7113
Guard Assembly (LH) 2 196-7114
Wear Strip 4 271-6079
Bolt (12 mm) 12 8T-4956
Washer 12 8T-4223

D4H XL/LGP SystemOne END GUIDING GUARDS

LEVEL ONE GUIDING

PART
(PER MACHINE) QUANTITY NUMBER
Wear Strip 8 271-6079 1
Bolt (12 mm) 24 8T-4956
Washer 24 8T-4223
1 Support bar 9U-9244 required with this wear strip, weld support bar to end guide guard assembly, see Special Instructions REHS2570 for
directions.

D5N/M LGP, D5N/M XL END GUIDING GUARDS

METRIC HARDWARE (USE WITH D5M LGP 7 ROLLER FRAME CONFIGURATION)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 109-0058
Guard Assembly 2 109-0059
Wear Strip 4 233-5001
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
Rear
Guard Assembly 2 109-0060
Guard Assembly 2 109-0061
Wear Strip 4 233-5001
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223

23
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N/M LGP END GUIDING GUARDS

METRIC HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)
3CR1232-UP, 3DR464-UP

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 183-5213
Guard Assembly 2 183-5214
Wear Strip 4 233-5001
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
Rear
Guard Assembly 2 183-5949
Guard Assembly 2 183-5950
Wear Strip 4 233-5001
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223

561N END GUIDING GUARDS

METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly (RH) 2 196-7111
Guard Assembly (LH) 2 196-1712
Wear Strip 4 233-5001
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
Rear
Guard Assembly (RH) 2 196-1713
Guard Assembly (LH) 2 196-1714
Wear Strip 4 233-5001
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223

24
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 108-3990
Guard Assembly 2 108-3995
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
1
Spacer 4 108-4250
Rear
Guard Assembly 2 108-3998
Guard Assembly 2 108-4002
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
Spacer 4 108-4250
1 Required for Sealed and Lubricated Track.

D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 8E-9766
Guard Assembly 2 8E-9767
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
Rear
Guard Assembly 2 6Y-9925
Guard Assembly 2 6Y-9926
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198

25
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

LEVEL THREE GUIDING

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 261-2040
Guard Assembly (LH) 2 261-2041
Tube 8 205-6140
Bolt (16 mm) 8 110-6968
Washer 16 9X-8257
Nut 8 8T-4778
Bolt (16 mm) (D5N/M) (Guard Assembly to Track Roller Frame 28 8T-4140
Bolt (3/4 Inch) (D4H) (Guard Assembly to Track Roller Frame) 28 1A-8063
Spacer 28 204-6365
Bracket Assembly (RH) 2 248-3957
Bracket Assembly (LH) 2 248-3955
Bolt (12 mm) 8 8T-4956
Washer 8 7X-0550

D5N, D5M, D4H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)
LEVEL THREE GUIDING

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 261-2042
Guard Assembly (LH) 2 261-2043
Tube 10 205-6140
Bolt (16 mm) 10 110-6968
Washer 20 9X-8257
Nut 10 8T-4778
Bolt (16 mm) (D5N/M) (Guard Assembly to Track Roller Frame) 28 8T-4140
Bolt (3/4 Inch) (D4H) (Guard Assembly to Track Roller Frame) 28 1A-8063
Spacer 28 204-6365
Bracket Assembly (RH) 2 248-3957
Bracket Assembly (LH) 2 248-3955
Bolt (12 mm) 8 8T-4956
Washer 8 7X-0550

26
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5M XL TRACK ROLLER GUARDS (FULL LENGTH)

METRIC MOUNTING HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4030
Guard Assembly 2 108-4031
Spacer (Mounting) 28 8G-5258
Bolt - Mounting (16 mm) 28 8T-4140
Tube 8 8V-4772
Bolt - Cross-Tube (16 mm) 8 110-6968
Washer 16 9X-8257
Nut (16 mm) 8 8T-4778
Plate 2 108-4016
Plate 2 108-4017
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)

METRIC MOUNTING HARDWARE (USE WITH 7 ROLLER FRAME CONFIGURATION)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4033
Guard Assembly 2 108-4036
Spacer (Mounting) 36 8G-5258
Bolt - Mounting (16 mm) 36 8T-4140
Tube 10 8V-4772
Bolt - Cross-Tube (16 mm) 10 110-6968
Washer 20 9X-8257
Nut (16 mm) 10 8T-4778
Plate 2 108-4016
Plate 2 108-4017
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

27
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)

METRIC MOUNTING HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)
3CR1232-UP, 3DR464-UP

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 183-5204
Guard Assembly 2 183-5207
Spacer (Mounting) 28 204-6365
Bolt - Mounting (16 mm) 28 8T-4140
Tube 10 8V-4772
Bolt - Cross-Tube (16 mm) 10 110-6968
Washer 20 9X-8257
Nut (16 mm) 10 8T-4778
Plate 4 183-8468
Bolt (12 mm front) 4 8T-4956
Bolt (12 mm front) 4 8T-4183
Bolt (12 mm rear) 4 8T-4139
Washer 12 8T-4223

561N TRACK ROLLER GUARDS (FULL LENGTH)

METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 205-6158
Guard Assembly (LH) 2 205-6159
Tube 10 205-6140
Bolt (16 mm) 10 110-6968
Washer 20 9X-8257
Nut 10 8T-4778
Bolt (16 mm) 28 8T-4140
Spacer 28 204-6365
Bracket Assembly (RH) 2 205-6142
Bracket Assembly (LH) 2 205-6143
Bolt (12 mm) 8 8T-4956
Washer 8 7X-0550
Bolt (Rear) (12 mm) 4 8T-4194
Washer 4 7X-0550

28
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4018
Guard Assembly 2 108-4020
Tube 4 8V-4772
Bolt 4 5P-4625
Bolt 28 8T-8924
Bolt 12 8T-8917
Washer 12 8T-4223
Washer 8 8T-4122
Nut 4 3K-2889
Plate 2 108-4016
Plate 2 108-4017
Spacer 28 6K-5640

D4H XL TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4030
Guard Assembly 2 108-4031
Tube 8 8V-4772
Bolt 8 5P-4625
Bolt 28 8T-8924
Bolt 12 8T-8917
Washer 12 8T-4223
Washer 16 8T-4122
Nut 8 3K-2889
Plate 2 108-4016
Plate 2 108-4017
Spacer 28 6K-5640

29
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4033
Guard Assembly 2 108-4036
Tube 10 8V-4772
Bolt 10 5P-4625
Bolt 36 8T-8924
Bolt 12 8T-8917
Washer 12 8T-4223
Washer 20 8T-4122
Nut 10 3K-2889
Plate 2 108-4016
Plate 2 108-4017
Spacer 36 6K-5640

D4H TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 6Y-9932
Guard Assembly 2 6Y-9933
Tube 4 8V-4772
Bolt 4 5P-4625
Bolt 28 8T-8924
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 8 8T-4122
Washer 4 3K-2889
Plate 4 8Y-0356
Spacer 28 6K-5640

30
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H XL TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8E-9704
Guard Assembly 2 8E-9705
Tube 8 8V-4772
Bolt 8 5P-4625
Bolt 28 8T-8924
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 16 8T-4122
Washer 8 3K-2889
Plate 4 8Y-0356
Spacer 28 6K-5640

D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 6Y-9949
Guard Assembly 2 6Y-9939
Tube 10 8V-4772
Bolt 10 5P-4625
Bolt 40 8T-8924
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 20 8T-4122
Washer 10 3K-2889
Plate 4 8Y-0356
Spacer 40 6K-5640

D5N/M,XL SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUPS
METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Roller #2) 2 251-8580
Guard Assembly (Roller #5) 2 251-8578
Bolt (16 mm) 16 8T-4140
Spacer 16 204-6365

31
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H XL SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUP
INCH HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 251-8578
Bolt (3/4 Inch) 16 1A-8063
Spacer 16 204-6365

D5N, D5M, LGP SystemOne CENTER GUIDING GUARDS

LEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP
METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 251-8580
Bolt (16 mm) 8 8T-4140
Spacer 8 204-6365

D5N/M,LGP SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPS
METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 251-8580
Bolt (16 mm) 16 8T-4140
Spacer 16 204-6365

D4H LGP SystemOne CENTER GUIDING GUARDS

LEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP
INCH HARDWARE

PART
QUANTITY NUMBER
Guard Assembly 2 251-8580
Bolt (3/4 Inch) 8 1A-8063
Spacer 8 204-6365

32
 Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H LGP SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITION OVER #3 & #6 ROLLER GROUP
INCH HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 251-8580
Bolt (3/4 Inch) 16 1A-8063
Spacer 16 204-6365

D5N LGP, D5N XL, 561N, 561M CENTER GUIDING GUARDS

GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 205-6155
Bolt (16 mm) 8 8T-4140
Spacer 8 204-6365

561N CENTER GUIDING GUARDS

GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 205-6157
Bolt (16 mm) 16 8T-4140
Spacer 16 204-6365

D5M LGP, D5M XL CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 183-8467
Bolt 8 8T-4140
Spacer 8 204-6365

D4H, D4H LGP, D4H XL, 561H CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4022
Bolt 8 8T-8924
Spacer 8 6K-5640

33
Elevated Sprocket Tractors
D5N, D5M, D4H, 561N, 561M, 561H

D4H, D4H LGP, D4H XL CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6Y-9934
Bolt 4 5P-4625
Bolt 8 8T-8924
Bolt 16 7X-3328
Washer 8 8T-4122
Washer 16 8T-4223
Lock Nut 4 3K-2889
Tube 4 8V-4772
Bar 4 6Y-9935
Spacer 8 6K-5640

34
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M XL/LGP SystemOne™ TRACK

PRESS FIT MASTER
D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP,
ALH1-UP, CBF1-UP,CBJ1-UP
D6N/M LGP, D5H LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP,
5NR1-UP, 9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FINE
PART XL LGP GRADER
NUMBER 40 Section 46 Section 47 Section
Link Assembly (Quantity 2) 235-2511 1 235-2510 298-2726
Components of Link Assembly
Link Box Standard 2 298-2723 20 23 22
Link Box Offset 3 298-2724 -- -- 1
Standard Link 235-2501 38 44 44
4
Standard Link (Press Fit) 235-2501 2 2 2
Track Hardware 4
Bolt (M20) 6Y-0846 160 184 188
Nut 9W-3361 160 184 188
1 Contains Standard Link Box 235-2509.
2 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.
3 Link Box Offsset that is greater than 40% worn should be replaced with part number 264-9769.
4 Not part of link assembly; required to assemble track group.

D6N, D6M XL/LGP SystemOne™ TRACK

CLAMP MASTER
D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP,
ALH1-UP, CBF1-UP,CBJ1-UP
D6N/M LGP, D5H LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP,
5NR1-UP, 9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FINE
PART XL LGP GRADER
NUMBER 40 Section 46 Section 47 Section
Link Assembly -- 40 Section 235-2511 1 235-2510 298-2726
Components of Link Assembly
Link Box Standard 2 298-2723 20 23 22
Link Box Offset 3 298-2724 -- -- 1
Standard Link 235-2501 38 44 44
4
Clamp Master Link (Press Fit) 235-2619 2 2 2
Track Hardware 4
Bolt (M20) 6Y-0846 160 180 184
Nut 9W-3361 160 180 184
Track Bolt Master (M20) 5 254-0225 4 4 4
1Contains Standard Link Box 235-2509.
2Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.
3Link Box Offsset that is greater than 40% worn should be replaced with part number 264-9769.
4Not part of link assembly; required to assemble track group.
5It is recommended that track bolt 254-0225 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and /or bolt
breakage.

35
Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M XL SystemOne™ PRESS FIT MADE TO ORDER (MTO) TRACK GROUPS
TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 235-2511
Extreme Service Shoe -- 24" (610 mm) 2 256-4873

D6N, D6M LGP SystemOne™ PRESS FIT MADE TO ORDER (MTO) TRACK GROUPS
TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 298-2725
Extreme Servcie Shoe -- 33" (840 mm) 2 287-6106

36
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, D5H HEAVY DUTY SEALED AND LUBRICATED TRACK 1

D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP,
ALH1-UP, CBF1-UP,CBJ1-UP
D6N/M LGP, D5H LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP,
5NR1-UP, 9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP
D6M, D5H FINE GRADER (47 SECTION):1DD, 9HC
7.50" (190.5 mm) PITCH - 3/4" BOLT

FINE
PART XL LGP GRADER
NUMBER 40 Section 46 Section 47 Section
Link Assembly -- (Quantity 2) 110-2976 106-1636 106-1634
Track Links
RH Pin End Master 106-1627 1 1 1
LH Pin End Master 106-1628 1 1 1
RH Bushing End Master 106-1629 1 1 1
LH Bushing End Master 106-1630 1 1 1
RH Regular 106-1625 39 45 46
LH Regular 106-1626 39 45 46
Other Components
Pin 179-0126 40 46 47
Bushing 106-1618 40 46 47
Seal Assembly (Rigid) 250-3988 80 92 94
Thrust Ring 152-8070 80 92 94
Stopper 5G-2247 40 46 47
Plug 6Y-0473 40 46 47
2
Track Hardware
Bolt (Gouser Shoe) 6V-1792 156 180 184
Bolt (Self-Cleaning Shoe) 6V-1792 -- 90 92
Bolt (Self- Cleaning Shoe) 107-0718 -- 90 92
Nut 1S-1860 156 180 184
Master Bolt (Grouser Shoe) 107-0719 2 2 2
Master Bolt (Grouser Shoe) 106-1642 2 2 2
Master Bolt (Self-Cleaning Shoe) 107-0719 -- 2 2
Master Bolt (Self-Cleaning Shoe) 107-0717 -- 2 2
Special Sets/Groups
Seal Set (92 Seal Assemblies) 252-7855 1 1 1
Bushing and Seal Group (37 Sections) 115-2439 1 1 1
1 When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21 and UC 94-17. Master shoe required with heavy duty track. Aslo
refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
2 Not part of link assembly; required to assemble track group.

D6N XL, D6M XL MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 110-2976
Moderate Service Shoe -- 24" (610 mm) 2 110-2978

37
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N LGP, D6M LGP MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 106-1636
Moderate Service Shoe -- 34" (865 mm) 2 106-1646
Extreme Service Shoe -- 34" (865 mm) 2 254-7199

D5H STD/XL HEAVY DUTY SEALED AND LUBRICATED TRACK 1

D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UP
D5H XL (39 SECTION): 8RJ4217-UP
7.50" (190.5 mm) PITCH - 3/4" BOLT

PART STD XL
NUMBER 37 Section 39 Section
Link Assembly (Quantity 2) 106-1635 106-1637
Track Links
RH Pin End Master 106-1627 1 1
LH Pin End Master 106-1628 1 1
RH Bushing End Master 106-1629 1 1
LH Bushing End Master 106-1630 1 1
RH Regular 106-1625 36 38
LH Regular 106-1626 36 38
Other Components
Pin 179-0126 37 39
Bushing 106-1618 37 39
Seal Assembly (Rigid) 250-3988 74 78
Thrust Ring 152-8070 74 78
Stopper 5G-2247 37 39
Plug 6Y-0473 37 39
2
Track Hardware
Bolt 6V-1792 144 152
Nut 1S-1860 144 152
Master Bolt 107-0719 2 2
Master Bolt 106-1642 2 2
Special Sets/Groups
Seal Set (92 Seal Assemblies) 252-7855 1 1
Bushing and Seal Group (37 Sections) 115-2439 1 1
1 When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21 and UC94-17. Master shoe required with heavy duty track. Also
refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
2 Not part of link assembly; required to assemble track group.

38
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N XL/LGP, D6M XL/LGP, D6M D5H FINE GRADER, ROTATING BUSHING TRACK 1
D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, 9ZM1-UP, AKM1-UP, CBL1-UP,
CCK1-UP, ALH1-UP, CBF1-UP, CBJ1-UP
D6N/M LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP,
9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP
D6M D5H FINE GRADER (47 SECTION): 1DD, 9HC
7.50" (190.5 mm) PITCH - 3/4" BOLT

PART XL LGP FINE GRADER

NUMBER 40 Section 46 Section 47 Section
Link Assembly (Quantity 2) 152-8043 152-8041 152-8047
Track Links
RH Pin End Master 106-1627 1 1 1
LH Pin End Master 106-1628 1 1 1
2
RH Bushing End Master 165-1752 1 1 1
LH Bushing End Master 2 165-1753 1 1 1
2
RH Regular 165-1750 39 45 46
LH Regular 2 165-1751 39 45 46
Other Components
Pin 156-4701 40 46 47
Bushing 165-1768 40 46 47
Seal Assembly (Rigid) 250-3988 160 184 188
Thrust Ring 152-8070 160 184 188
Stopper 5G-2247 40 46 47
Plug 6Y-0473 40 46 47
3
Track Hardware
Bolt 6V-1792 156 180 184
Nut 1S-1860 156 180 184
Master Bolt 106-1642 2 2 2
Master Bolt 107-0719 2 2 2
1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or
less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-13 for installation and guarding information. Also refer to
Special Instruction SEHS9797 for additional guarding information and SEHS9725 for shoe rework options. For servicing information refer to
Special Instruction SEHS9542. Master shoe required with Rotating Bushing Track.
2 Joint assemblies (includes link and insert). Insert not serviced.
3 Not part of link assembly; required to assemble track group

39
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H STD/XL ROTATING BUSHING TRACK 1

D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UP
D5H XL (39 SECTION): 8RJ4217-UP
7.50" (190.5 mm) PITCH - 3/4" BOLT

PART STD XL
NUMBER 37 Section 39 Section
Link Assembly (Quantity 2) 152-8044 152-8045
Track Links
RH Pin End Master 106-1627 1 1
LH Pin End Master 106-1628 1 1
2
RH Bushing End Master 165-1752 1 1
2
LH Bushing End Master 165-1753 1 1
RH Regular 2 165-1750 36 38
LH Regular 2 165-1751 36 38
Other Components
Pin 156-4701 37 39
Bushing 165-1768 37 39
Seal Assembly (Rigid) 250-3988 148 156
Thrust Ring 152-8070 148 156
Stopper 5G-2247 37 39
Plug 6Y-0473 37 39
3
Track Hardware
Bolt 6V-1792 144 152
Nut 1S-1860 144 152
Master Bolt 106-1642 2 2
Master Bolt 107-0719 2 2
1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or
less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-13 for installation and guarding information. Also refer to
Special Instruction SEHS9797 for additional guarding information and SEHS9725 for shoe rework options. For servicing information refer to
Special Instruction SEHS9542. Master shoe required with Rotating Bushing Track.
2 Joint assemblies (includes link and insert). Insert not serviced.
3 Not part of link assembly; required to assemble track group

40
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H STD/XL/LGP/FINE GRADER HYBRID TRACK

D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889
D5H XL (39 SECTION):8RJ1-4216
D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519
D5H FINE GRADER (47 SECTION):1DD, 9HC
7.50" (190.5 mm) PITCH -- 5/8" BOLT

PART STD XL LGP Fine Grader

NUMBER 37 Section 39 Section 46 Section 47 Section
Link Assembly -- (Quantity 2) 230-7272 238-6928 238-6930 238-6931
Track Links
RH Pin End Master 244-6571 1 1 1 1
LH Pin End Master 244-6572 1 1 1 1
RH Bushing End Master 244-6573 1 1 1 1
LH Bushing End Master 244-6574 1 1 1 1
RH Regular 229-6909 36 38 45 46
LH Regular 229-6910 36 38 45 46
Other Components
Pin 160-7818 1 37 39 46 47
Bushing 229-6915 37 39 46 47
Seal Assembly (Rigid) 250-3988 74 78 92 94
Thrust Ring 6Y-6481 74 78 92 94
Stopper 5G-2247 37 39 46 47
Plug 6Y-0473 37 39 46 47
2
Track Hardware
Bolt (Grouser Shoes) 9G-3110 144 152 180 184
Bolt (Self Cleaning Shoe) 9G-3110 -- -- 90 --
Bolt (Self Cleaning Shoe) 3T-3884 -- -- 90 --
Nut 1M-1408 144 152 180 184
Master Bolt 3T-8580 2 2 2 2
Master Bolt 3T-8601 2 2 2 2
Master Bolt (Self-Cleaning Shoe) 3T-8580 -- -- 2 --
Master Bolt (Self-Cleaning Shoe) 3T-3889 -- -- 2 --
Special Sets/Groups
Seal Set (92 Seal Assemblies) 252-7855 1 1 1 1
Bushing and Seal Group (37 Sections) 293-9146 1 1 1 1
1 Former pin 3P-3880 (Use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group.

41
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H STD/XL/LGP/FINE GRADER SEALED AND LUBRICATED TRACK

RIGID SEAL ASSEMBLY
D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889
D5H XL (39 SECTION):8RJ1-4216
D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519
D5H FINE GRADER (47 SECTION):1DD, 9HC
7.50" (190.5 mm) PITCH -- 5/8" BOLT

PART STD XL LGP Fine Grader

NUMBER 37 Section 39 Section 46 Section 47 Section
Link Assembly -- (Quantity 2) 6Y-5412 1 8E-9820 2 6Y-5414 3 8E-4160 4
Track Links
RH Pin End Master 8E-0885 1 1 1 1
LH Pin End Master 8E-0886 1 1 1 1
RH Bushing End Master 8E-0887 1 1 1 1
LH Bushing End Master 8E-0888 1 1 1 1
RH Regular 6Y-9267 36 38 45 46
LH Regular 6Y-9268 36 38 45 46
Other Components
Pin 160-7818 5 37 39 46 47
Bushing 6Y-0929 37 39 46 47
Seal Assembly (Rigid) 250-3988 74 78 92 94
Thrust Ring 6Y-6481 74 78 92 94
Stopper 5G-2247 37 39 46 47
Plug 6Y-0473 37 39 46 47
6
Track Hardware
Bolt (Grouser Shoes) 9G-3110 144 152 180 184
Bolt (Self Cleaning Shoe) 9G-3110 -- -- 90 --
Bolt (Self Cleaning Shoe) 3T-3884 -- -- 90 --
Nut 1M-1408 144 152 180 184
Master Bolt 3T-8580 2 2 2 2
Master Bolt 3T-8601 2 2 2 2
Master Bolt (Self-Cleaning Shoe) 3T-8580 -- -- 2 --
Master Bolt (Self-Cleaning Shoe) 3T-3889 -- -- 2 --
Special Sets/Groups
Seal Set (92 Seal Assemblies) 252-7855 1 1 1 1
Bushing and Seal Group (37 Sections) 6Y-5405 1 1 1 1
1 Serviced replaced by 230-7272 hybrid link assembly.
2 Serviced replaced by 238-6928 hybrid link assembly.
3 Serviced replaced by 238-6930 hybrid link assembly.
4 Serviced replaced by 238-6931 hybrid link assembly.
5 Former pin 3P-3880 (Use 9G-1642 stopper).
6 Not part of link assembly; required to assemble track group.

42
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H STD/XL/LGP SEALED AND LUBRICATED

CRESCENT SEAL ASSEMBLY
D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889
D5H XL (39 SECTION):8RJ1-4216
D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519
7.50" (190.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 37 Section 2 -- 1
Track Links
RH Regular 36 3T-8405
LH Regular 36 3T-8406
Other Components
Pin 37 160-7818 2
Bushing 37 6Y-0929
Seal Assembly (Crescent) 74 3T-5631
Thrust Ring 74 9G-3106
Stopper 37 5G-2247
Plug 37 6Y-0473
3
Track Hardware
Bolt (Grouser Shoes) 144 9G-3110
Bolt (Self Cleaning Shoe) (LGP, 46 Section) 90 9G-3110
Bolt (Self Cleaning Shoe) (LGP. 46 Section) 90 3T-3884
Nut 144 1M-1408
Master Bolt (Grouser Shoes) 2 3T-8580
Master Bolt (Grouser Shoes) 2 3T-8601
Master Bolt (Self-Cleaning Shoe) (LGP 46 Section) 2 3T-8580
Master Bolt (Self-Cleaning Shoe) (LGP 46 Section) 2 3T-3889
Special Sets/Groups
Bushing and Seal Group (37 Sections) 1 6Y-3880
1 If 37, 39, 46, section link assemblies are required upgrade to sealed and lubricated track with rigid seals.
2 Former pin 3P-3880 (Use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

43
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N LGP, D6M LGP, D5H LGP HEAVY DUTY TRI/QUAD TRACK 1
7.50" (190.5 mm) PITCH -- 3/4" BOLT

QUAD TRACK TRI TRACK PART

QUANTITY QUANTITY NUMBER
Link Assembly -- 46 Section 2 2 106-1636 2
Track Links
RH Pin End Master 1 13 106-1627
4
LH Pin End Master 1 1 106-1628
3
RH Bushing End Master 1 1 106-1629
LH Bushing End Master 1 14 106-1630
3
RH Regular 45 45 106-1625
LH Regular 45 45 4 106-1626
Other Components
Stub Pin 92 46 106-1610
Stub Bushing 92 46 107-0720
Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri
-- 1 center chain & 1 outrigger) 5
Bolt 360 270 6V-1792
Nut 360 270 1S-1860
Master Bolt 4 3 106-1642
Master Bolt 4 3 107-0719
1 When installing Heavy Duty Track on existing machines, refer to Special Instruction SEHS9797 for additional guarding information and
SEHS9725 for shoe rework options. For more information about quad and tri link track, refer to IRM UC91-18 and special instruction SEHS8881.
Master shoe required with heavy duty track.
2 Refer to Heavy Duty Track section for component information.
3 Required for right hand outrigger chain.
4 Required for left hand outrigger chain.
5 Not part of link assembly; required to assemble track group.

D6N, D6M SystemOne TRACK SHOES

7.50" (190.5 mm) PITCH - 20 mm BOLT

MASTER
SHOE PART
TYPE WIDTH PART NUMBER NUMBER
Moderate Service 22.0" (560mm) 246-5750 254-9051
Moderate Service 24.0" (610mm) 235-2504 254-9049
Moderate Service 28.0" (710 mm) 246-5751 254-9048
Moderate Service 33.0" (840 mm) 267-8910 313-4542
Moderate Service 34.0" (860 mm) 235-2503 254-9047
Extreme Service 20.0" (510 mm) 246-5749 254-9053
Extreme Service 22.0" (560 mm) 246-5748 254-9052
Extreme Service 24.0" (610 mm) 246-5747 254-9050
Extreme Service (Center Hole) 24.0" (610 mm) 289-5210 --
Extreme Service 33.0" (840 mm) 287-6104 --
Extreme Service (Center Hole) 33.0" (840 mm) 274-7839` 313-4543
Extreme Service 34.0" (860 mm) 267-6099 294-4813
Self Cleaning 34.0" (865 mm) 241-7871 --

44
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, D5H TRACK SHOES 1

HEAVY DUTY AND RBT SEALED AND LUBRICATED TRACK
7.50" (190.5 mm) PITCH -- 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER STD XR XL LGP
Extreme Service 20.0" (510 mm) 106-1608 106-1617 Y Y Y N
Extreme Service 22.0" (560 mm) 107-0713 107-0714 N Y Y Y
Extreme Service 23.6" (600 mm) 132-1334 132-1336 N Y Y Y
Extreme Service 34.0" (860 mm) 222-1796 222-1797 N N N Y
Moderate Service 18.0" (460 mm) 106-1603 106-1611 Y Y Y N
Moderate Service 20.0" (510 mm) 106-1604 106-1612 Y Y Y N
Moderate Service 22.0" (560 mm) 106-1607 106-1613 N Y Y N
Moderate Service 24.0" (610 mm) 117-0615 117-0616 N Y Y Y
Moderate Service 28.0" (710 mm) 106-1602 106-1615 N N N Y
Moderate Service 34.0" (865 mm) 106-1605 106-1616 N N N Y
Self-Cleaning 34.0" (865 mm) 107-0715 107-0716 N N N Y
Quad (MS) 26.0" (660 mm) 115-3328 115-3329 N N Y Y
Quad (MS) 32.0" (810 mm) 115-3330 115-3331 N N Y Y
1 Heavy Duty Sealed & Lubricated Track has a different bolt pattern and bolt size than conventional Sealed & Lubricated Track. A procedure exists
to rework Sealed & Lubricated Track shoes for use on Heavy Duty Track; refer to Special Instruction SEHS9725.

D5H TRACK SHOES

HYBRID AND SEALED AND LUBRICATED TRACK
7.50" (190.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER STD XR XL LGP
Extreme Service 20.0" (510 mm) 6Y-9416 Y Y Y N
Extreme Service 22.0" (560 mm) 8E-9827 N Y Y N
Extreme Service 24.0" (610 mm) 8E-9825 N Y Y Y
Moderate Service 16.0" (405 mm) 3T-8584 Y Y N N
Moderate Service 18.0" (460 mm) 3T-8597 Y Y N N
Moderate Service 20.0" (510 mm) 3T-8586 Y Y Y N
Moderate Service 22.0" (560 mm) 8E-9823 N Y Y Y
Moderate Service 24.0" (610 mm) 8E-9821 N Y Y Y
Moderate Service 28.0" (710 mm) 8E-4974 N N N Y
Moderate Service 34.0" (865 mm) 3T-8590 N N N Y
Self-Cleaning 34.0" (865 mm) 6T-0253 N N N Y
Quad (MS) 26.0" (660 mm) 9W-8191 N N Y Y
Quad (MS) 32.0" (810 mm) 9W-5187 N N Y Y

45
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M SPROCKETS

HEAVY DUTY, SystemOne, RBT, AND SEAL AND LUBRICATED TRACK

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 6I-8077
Bolt 25 6V-0937
Nut 25 7H-3607
Washer 25 2S-5658

D5H SPROCKETS
HEAVY DUTY, RBT, HYBRID, AND SEALED AND LUBRICATED TRACK

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 3 106-1622
Sprocket Segment (4 Tooth) 2 106-1624
Bolt 23 6V-0937
Nut 23 7H-3607
Washer 23 2S-5658

D6N, D6M, SystemOne CENTER TREAD IDLER

XL, LGP

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 290-0737
Components of Group
Idler Assembly 1 290-0738
Bearing 1 2 9P-1360
Shaft 1 161-7350
Collar 2 160-9756
Retainer 2 161-7550
2
Thrust Washer 1 110-3362
Bolt 12 9X-8271
Washer 12 9X-2327
Seal -- Duo-Cone Group (Symmetric) 2 161-7247
Toric Ring 1 2 161-7249
Seal -- Collar 2 5K-0216
Seal -- Retainer 2 1H-8128
Stopper 1 3T-9536
Plug 1 6Y-0473
1Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and (4)
2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 Thrust Washer. See
Special Instruction SEHS8515.

46
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, D5H IDLERS

CURRENT DESIGN - SYMMETRIC SEALS (STD, XL, LGP)
INCREASED TREAD WEAR LIFE

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 190-1546
Components of Group
Idler Assembly 1 190-1547
1
Bearing 2 9P-1360
Shaft 1 161-7350
Collar 2 160-9756
Retainer 2 161-7550
Thrust Washer 2 1 110-3362
Bolt 12 053-2294
Washer 12 5M-2894
Seal -- Duo-Cone Group (Symmetric) 2 161-7247
Toric Ring 1 2 161-7249
Seal -- Collar 2 5K-0216
Seal -- Retainer 2 1H-8128
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware (D6N, D6M) 3
End Cap 2 108-1138
Block 2 108-1136
Bolt 4 8T-0282
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-2301
Mounting Hardware (D5H) 3
End Cap 2 9N-4683
Block 2 9N-4680
Bolt 4 1A-8651
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-2301
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and (4)
2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 Thrust Washer. See
Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

47
Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M XL, LGP SystemOne CENTER TREAD IDLER HARDWARE

FACTORY BUILT MACHINES

PART
(PER MACHINE) QUANTITY NUMBER
Block (Front LH) 2 254-3928
Block (Front RH) 2 254-3927
Block (Rear LH) 2 283-5752
Block (Rear RH) 2 283-5748
End Cap (Abutment Style) (Front LH) 2 233-0372
End Cap (Abutment Style) (Front RH) 2 233-0368
End Cap (Abutment Style) (Rear LH) 2 283-5750
End Cap (Abutment Style) (Rear RH) 2 283-5746
Shim - Front (10 mm Thick) 4 254-3929
Shim - Rear (5 mm Thick) 4 283-5753
Bolt-Rear (16mm x 135mm) 8 146-5132
Bolt-Front (16mm x 130mm) 8 8T-0359
Washer (16mm) 16 5P-8247
Plate (Bolt to Front and Rear Yoke Assemblies) 8 248-3971
Scraper 8 248-3972
Bolt (12 mm) 8 8T-4910
Bolt (12 mm) 24 8T-4183
Washer (12 mm) 32 7D-1649
Scraper (Bolt to End Guiding Guard) 8 271-6093
Bolt (12mm) 24 8T-4194
Washer (12mm) 24 198-4778

48
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, XL, LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT
RETROFIT KIT

PART
(PER MACHINE) QUANTITY NUMBER
Hardware Idler Arrangement (Includes hardware for 4 idler groups) 1 246-5714
Components of Idler Hardware Arrangement
Block (Front LH) 2 254-3928
Block (Front RH) 2 254-3927
Block (Rear LH) 2 283-5752
Block (Rear RH) 2 283-5748
End Cap (Abutment Style) (Front LH) 2 233-0372
End Cap (Abutment Style) (Front RH) 2 233-0368
End Cap (Abutment Style) (Rear LH) 2 283-5750
End Cap (Abutment Style) (Rear RH) 2 283-5746
Shim - Front (10 mm Thick) 4 254-3929
Shim - Rear (5 mm Thick) 4 283-5753
Bolt-Rear (16mm x 135mm) 8 146-5132
Bolt-Front (16mm x 130mm) 8 8T-0359
Washer (16mm) 16 5P-8247
Plate (Weld to End Guiding Guards) 8 271-6094
Scraper 8 271-6095
Bolt (12 mm) 24 8T-4956
Washer (12 mm) 24 5P-1076
Plate- Scraper Base (Front Track Roller Frame) 2 234-4319
Plate- Scraper Base (Rear Track Roller Frame) 2 246-4341
Side Scraper 8 238-0452
Tread Scraper-Front 2 238-0453
Scraper Bolt (12mm) 28 8T-4139
Scraper Washer (12mm) 28 5P-1076

49
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6M, D5H IDLERS

FORMER DESIGN (STD, XL, LGP)

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 --
Components of Group
Idler Assembly 1 190-1547
1
Bearing 2 9P-1360
Shaft 1 6T-3285
Retainer 2 6T-3284
2
Thrust Washer 1 110-3362
Bolt 12 053-2294 3
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer 2 1H-8128
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware (D5H) 4
End Cap 2 9N-4683
Block 2 9N-4680
Bolt 4 1A-8651
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-2301
Mounting Hardware (D6M) 4
End Cap 2 108-1138
Block 2 108-1136
Bolt 4 8T-0282
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-2301
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
1
Toric Ring 1 7T-4087
O-Ring 1 1 6V-2699
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and (4)
2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 Thrust Washer. See
Special Instruction SEHS8515.
3 Use 0S-1594 bolt with former idler assembly 6T-1763
4 These components are not included in the idler group; quantities shown are required to mount each idler.

D6N, D6M SystemOne CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 229-5446

50
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, D5H CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6Y-3908
Roller Shell 1 5A-8375
Shaft 1 6Y-2043
Plate 1 8P-6188
Bolt 2 5K-9107
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 1M-8747
Toric Ring 1 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

D6N, D6M SystemOne TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group -1 240-9557
2
Mounting Hardware (D6N, D6M)
Cap 2 223-9110
Bolt (16 mm) 4 8T-0281
Washer 4 5P-8247
1 14 required for XL machines; 16 required for LGP machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

51
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, D5H TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (DF) / Machine 61 121-0827
Roller Group (SF) / Machine 8 121-0824
2
Roller Group (DF, Tall Flange) - 121-0830
Components of Group
Roller Shell (DF) 1 121-0828
Roller Shell (SF) 1 121-0825
Roller Shell (DF, Tall Flange) 1 121-0831
Bushing Assembly 2 121-0834
Bearing 3 1 8P-6652
Shaft 1 131-8742
Ring (Retaining-Snap) 2 121-1257
Ring (Lock) 2 6H-7382
End Collar 2 131-9352
Seal -- Duo-Cone Group 2 9W-5224
3
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware (D6N, D6M) 4
Bolt (16 mm) 4 6V-3303
Washer (16 mm) 4 5P-8247
4
Mounting Hardware (D5H)
Bolt (5/8") 4 0S-1625
Washer (5/8") 4 5P-8247
1 8 double flange rollers required for LGP machines.
2 Optional double flange roller for guiding; use quantity required for specific roller frame type.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

52
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 41 --
Single Flange (SF) 8 --
Components of Group
Roller Shell (DF) 1 9P-1362
Roller Shell (SF) 1 9P-1367
Bearing 2 2 9P-1360
Shaft 1 3T-9875
Retainer Assembly 2 3T-9877
Thrust Washer 3 1 9G-9351
Dowel 3 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
2
Toric Ring 1 8P-7003
2
O-Ring 1 6V-2699
Seal -- Retainer 2 5H-6734
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
End Cap (5/8") 2 8E-0281
Bolt (5/8") 4 1B-4367
Washer (5/8") 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
2
Toric Ring 1 7T-4087
O-Ring 2 1 6V-2699
1 8 double flange rollers required for LGP machines.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

53
Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M, XL/LGP SystemOne END GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 106-4370
Guard Assembly 2 106-4371
Wear Strip 4 251-8603
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223
Rear
Guard Assembly 2 109-3229
Guard Assembly 2 109-3230
Wear Strip 4 251-8603
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

D6N/M LGP, D6N/M XL END GUIDING GUARDS

METRIC MOUNTING HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 106-4370
Guard Assembly 2 106-4371
Wear Strip 4 196-7078
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
Rear
Guard Assembly 2 109-3229
Guard Assembly 2 109-3230
Wear Strip 4 196-7074
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223

54
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H, D5H LGP, D5H XL END GUIDING GUARDS

SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING
HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 106-4370
Guard Assembly 2 106-4371
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 8Y-1198 1
Strip 2 8Y-1199 2
Spacer 3 4 106-4402
Rear
Guard Assembly 2 106-4372
Guard Assembly 2 106-4373
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 8Y-1198 1
Strip 2 8Y-1199 2
Spacer 3 4 106-4402
1 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).
2 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).
3 Required for Sealed & Lubricated Track.

D6N, D6M XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 261-2044
Tube 12 205-6141
Bolt 12 110-6969
Washer 24 9X-8257
Nut- Self Locking 12 8T-4778
Bolt 24 8T-4140
Spacer 24 204-6355

55
Elevated Sprocket Tractors
D6N, D6M, D5H

D6N, D6M LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 261-2046
Guard Assembly (LH) 2 261-2047
Tube 12 205-6141
Bolt 12 110-6969
Washer 24 9X-8257
Nut- Self Locking 12 8T-4778
Bolt 28 8T-4140
Spacer 28 204-6355

D6M XL TRACK ROLLER GUARDS (FULL LENGTH)

METRIC MOUNTING HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard 2 145-7135
Guard 2 145-7134
Spacer (Mounting) 24 8G-5258
Bolt - Mounting (16 mm) 24 8T-4140
Tube 8 4S-6559
Bolt - Cross-Tube (16 mm) 8 110-6969
Washer 16 9X-8257
Nut (16 mm) 8 8T-4778
Plate 4 108-0809
Bolt (12 mm) 8 8T-4192
Bolt (12 mm) 8 8T-4139
Washer 16 8T-4223

56
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6M LGP TRACK ROLLER GUARDS (FULL LENGTH)

METRIC MOUNTING HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard 2 145-7133
Guard 2 145-7132
Spacer (Mounting) 28 8G-5258
Bolt - Mounting (16 mm) 28 8T-4140
Tube 10 4S-6559
Bolt - Cross-Tube (16 mm) 10 110-6969
Washer 20 9X-8257
Nut (16 mm) 10 8T-4778
Plate 4 108-0809
Bolt (12 mm) 8 8T-4192
Bolt (12 mm) 8 8T-4139
Washer 16 8T-4223

D5H STD TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 107-5888
Guard Assembly 2 107-5889
Tube 6 4S-6559
Bolt 6 5P-7971
Bolt 8 5P-2228
Bolt 20 7X-0347
Bolt 8 8T-8917
Washer 16 8T-4223
Washer 12 5P-8247
Nut 6 3K-2889
Plate 4 108-0809
Spacer 20 8G-5258

57
Elevated Sprocket Tractors
D6N, D6M, D5H

D5H XL TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 106-9563
Guard Assembly 2 106-9564
Tube 8 4S-6559
Bolt 8 5P-7971
Bolt 8 5P-2228
Bolt 24 7X-0347
Bolt 8 8T-8917
Washer 16 8T-4223
Washer 16 5P-8247
Nut 8 3K-2889
Plate 4 108-0809
Spacer 24 8G-5258

D5H LGP TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 107-5715
Guard Assembly 2 107-5716
Tube 10 4S-6559
Bolt 10 5P-7971
Bolt 8 5P-2228
Bolt 28 7X-0347
Bolt 8 8T-8917
Washer 16 8T-4223
Washer 20 5P-8247
Nut 10 3K-2889
Plate 4 108-0809
Spacer 28 8G-5258

58
 Elevated Sprocket Tractors
D6N, D6M, D5H

D5H STD TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8Y-1208
Guard Assembly 2 8Y-1211
Tube 10 4S-6559
Bolt 10 5P-7971
Bolt 20 7X-0347
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 20 8T-4122
Nut 10 3K-2889
Plate 4 8E-8783
Spacer 20 8G-5258

D5H XL TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8E-9635
Guard Assembly 2 8E-9636
Tube 8 4S-6559
Bolt 8 5P-7971
Bolt 28 7X-0347
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 16 5P-8247
Nut 8 3K-2889
Plate 4 8E-8783
Spacer 28 8G-5258

59
Elevated Sprocket Tractors
D6N, D6M, D5H

D5H LGP TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8Y-1254
Guard Assembly 2 8Y-1255
Tube 10 4S-6559
Bolt 10 5P-7971
Bolt 32 7X-0347
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 10 5P-8247
Nut 10 3K-2889
Plate 4 8E-8783
Spacer 32 8G-5258

D6N, D6M XL SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUP
METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 251-8570
Bolt (16 mm) 16 8T-4140
Spacer 16 204-6365

D6N, D6M LGP SystemOne CENTER GUIDING GUARDS

LEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP
METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 251-8570
Bolt (16 mm) 8 8T-4140
Spacer 8 204-6365

D6N, D6M LGP SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUP
METRIC HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 251-8570
Bolt (16 mm) 16 8T-4140
Spacer 16 204-6365

60
 Elevated Sprocket Tractors
D6N, D6M, D5H

D6N LGP CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 205-6164
Bolt (16 mm) 12 8T-4140
Spacer 12 204-6365

D6M XL CENTER GUIDING GUARDS

METRIC MOUNTING HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-0812
Bolt (16 mm) 8 8T-4140
Block 8 178-1096

D6M LGP CENTER GUIDING GUARDS

METRIC MOUNTING HARDWARE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 107-5721
Bolt (16 mm) 12 8T-4140
Spacer 12 8G-5258

D5H STD, D5H XL CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 106-9982
Bolt 8 7X-0347
Spacer 8 8G-5258

D5H LGP CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 107-5721
Bolt 12 7X-0347
Spacer 12 8G-5258

61
Elevated Sprocket Tractors
D6N, D6M, D5H

D5H STD, D5H XL CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8E-9763
Bolt 8 7X-0347
Bolt 16 5P-2228
Washer 16 8T-4223
Strip 4 8G-5335
Spacer 8 8G-5258

D5H LGP CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6Y-3917
Bolt 16 7X-0347
Bolt 6 5P-7971
Bolt 24 5P-2228
Washer 24 8T-4223
Lock Nut 6 3K-2889
Tube 6 4S-6559
Strip 4 6Y-3921
Spacer 16 8G-5258
Washer 6 5P-8247

62
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACK

PRESS FIT MASTER
D6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP,
4LG5596-UP, 1FJ5542-UP, 2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP,
BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP, BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP,
JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UP

D6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,
4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,
FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP,
GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP,
WFH1-UP, ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP,
RLW1-UP

D6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP,
4GG5500-UP, 8LN1-UP, 4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP,
BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP, DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP,
WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP
8.00" (203.2 mm) PITCH -- 22 mm BOLT

PART STD XL/XW/IG LGP

NUMBER 39 Section 41 Section 45 Section
Link Assembly -- (Quantity 2) 234-9672 1 297-4789 297-4788
Components of Link Assembly
Link Box Standard 297-4786 2 18 19 21
Link Box Offset 297-4787 3 1 1 1
Standard Link 234-9699 36 38 42
4
Standard Link (Press Fit) 234-9699 2 2 2
Track Hardware 4
Bolt (M22) 6Y-9024 156 164 180
Nut 9W-4381 156 164 180
1 Contains Standard Link Box 234-9679 and Offset Link Box 234-9681.
2 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9763.
3 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9768.
4 Not part of link assembly; required to assemble track group.

63
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACK

CLAMP MASTER
D6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP,
4LG5596-UP, 1FJ5542-UP, 2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP,
BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP, BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP,
JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UP

D6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,
4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,
FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP,
GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP,
WFH1-UP, ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP,
RLW1-UP

D6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP,
4GG5500-UP, 8LN1-UP, 4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP,
BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP, DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP,
WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP
8.00" (203.2 mm) PITCH -- 22 mm BOLT

PART STD XL/XW/IG LGP

NUMBER 39 Section 41 Section 45 Section
Link Assembly -- 45 Section 234-9672 1 297-4789 297-4788
Components of Link Assembly
Link Box Standard 297-4786 2 18 19 21
Link Box Offset 297-4787 3 1 1 1
Standard Link 234-9699 36 38 42
4
Clamp Master Link 198-7722 2 2 2
Track Hardware 4
Bolt (M22) 6Y-9024 152 160 176
Nut 9W-4381 152 160 176
Track Master Bolt(M22) 5 254-0224 4 4 4
1Contains Standard Link Box 234-9679 and Offset Link Box 234-9681.
2Link Box Standard that is greater than 40% worn should be replaced with part number 264-9763.
3Link Box Offset that is greater than 40% worn should be replaced with part number 264-9763.
4Not part of link assembly; required to assemble track group.
5It is recommended that track bolt 254-0224 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and /or bolt
breakage.

D6T/D6R/D6H XL/XW SystemOne PRESS FIT MADE TO ORDER (MTO) TRACK GROUPS
TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 234-9678
Extreme Service Shoe -- 22" (560 mm) 2 246-5216
Extreme Service Shoe -- 24" (610 mm) 2 246-5218
Extreme Service Shoe -- 24" (610 mm) (TRAP) 2 270-2673

64
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T/D6R/D6H XL/XW SystemOne™ MADE TO ORDER (MTO) CLAMP MASTER TRACK

GROUPS
TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 234-9678
Extreme Service Shoe -- 22" (560 mm) 2 256-0599
Extreme Service Shoe -- 24" (610 mm) 2 256-0597

D6T/D6R/D6H XW SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 297-4789
Extreme Service Shoe -- 30" (760 mm) 2 237-7530
Extreme Service Shoe -- 30" (760 mm) (Center Hole) 2 246-5222

D6T/D6R/D6H XW SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 297-4789
Extreme Service Shoe -- 30" (760 mm) 2 256-0595
Extreme Service Shoe -- 30" (760 mm) (Center Hole) 2 256-0593

D6T/D6R/D6H LGP SystemOne™ MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS
TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 297-4788
Extreme Service Shoe -- 30" (760 mm) (Center Hole) 2 275-5133
Extreme Service Shoe -- 36" (915 mm) 2 246-5220
Extreme Service Shoe -- 36" (915 mm) (Center Hole) 2 246-5223

D6T/D6R/D6H LGP SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACK GROUPS
TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 297-4788
Extreme Service Shoe -- 36" (915 mm) 2 256-0592
Extreme Service Shoe -- 36" (915 mm) (Center Hole) 2 256-0591

65
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T D6R D6H STD/XR/XL/LGP HEAVY DUTY SEALED AND LUBRICATED TRACK 1
D6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP,
4LG5596-UP, 1FJ5542-UP, 2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP,
BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP, BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP,
JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UP

D6R/H XR (40 SECTION): 5KK340-UP, 6CK381-UP, 7ZK5500-UP, 1YL320-UP, 2BL346-UP, 2TL5500-UP,

7KN1-UP, 9MN1-UP, 7DR1-UP, 6JN1-UP, 8XN1-UP, 6HR1-UP, 7CR1-UP

D6T/R/H XL, XW (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,
4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,
FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP,
GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP,
WFH1-UP, ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP,
RLW1-UP,

D6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP,
4GG5500-UP, 8LN1-UP, 4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP,
BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP, DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP,
WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART STD XR XL/XW LGP

NUMBER 39 Section 40 Section 41 Section 45 Section
Link Assembly (Quantity 2) 6I-9668 6I-9670 6I-9671 8E-9037
Track Links
RH Pin End Master 8E-7407 1 1 1 1
LH Pin End Master 8E-7408 1 1 1 1
RH Bushing End Master 8E-7409 1 1 1 1
LH Bushing End Master 8E-7410 1 1 1 1
RH Regular 8E-7405 38 39 40 44
LH Regular 8E-7406 38 39 40 44
Other Components
Pin 160-7820 2 39 40 41 45
Bushing 8E-7222 39 40 41 45
Seal Assembly (Rigid) 207-0544 78 80 82 90
Thrust Ring 152-8071 78 80 82 90
Stopper 5G-2247 39 40 41 45
Plug 6Y-0473 39 40 41 45
3
Track Hardware
Bolt (Grouser Shoe) 6V-1792 152 156 160 176
Bolt (Self-Cleaning Shoe) 6T-2162 88
Bolt (Self-Cleaning Shoe) 6V-1792 88
Nut 1S-1860 152 156 160 176
Master Bolt (Grouser Shoe) 9S-1838 4 4 4 4
Master Bolt (Self-Cleaning Shoe) 3P-1111 2
Master Bolt (Self-Cleaning Shoe) 9S-1838 2
Special Sets/Groups
Seal Set (90 Seal Assemblies) 256-9360 1 1 1 1
Bushing and Seal Group (39 Sections) 115-2440 1 1 1 1
1 When installing Heavy Duty Track on D6H earlier serial number machines, refer to IRM UC92-20 for installation and getting information. Also
refer to Special Instruction SEHS9585 for additional guarding information.
2 Former pin 8E-7220 (Use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

66
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T/D6R/D6H STD HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 6I-9668
Moderate Servcie Shoe -- 22" (560 mm) 2 6I-9641
Extreme Service Shoe -- 20" (510 mm) 2 6I-9643
Extreme Service Shoe -- 22" (560 mm) 2 6I-9644
Extreme Service Shoe -- 24" (610 mm) 2 1Q-4937

D6T/D6R/D6H XL/XW HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 6I-9671
Moderate Service Shoe -- 22" (560 mm) 2 6I-9653
Moderate Service Shoe -- 24" (610 mm) 2 6I-9654
Extreme Service Shoe -- 20" (510 mm) 2 6I-9655
Extreme Service Shoe -- 22" (560 mm) 2 6I-9656
Extreme Service Shoe -- 24" (610 mm) 2 1Q-4743

D6T/D6R/D6H XW HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 6I-9671
Moderate Service Shoe - 30" (760 mm) 2 1Q-4736
Extreme Service Shoe - 30" (760 mm) 2 138-5773

D6T/D6R/D6H LGP HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 8E-9037
Moderate Service Shoe -- 24" (610 mm) 2 6I-9109
Moderate Service Shoe -- 36" (915 mm) 2 8E-9039
Extreme Service Shoe -- 36" (915 mm) 2 208-1508
Extreme Service Shoe -- 36" (915 mm) (Trap) 2 1Q-4727

67
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R D6H STD/XR/XL/XW/LGP ROTATING BUSHING TRACK 1

D6R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP,
4LG5596-UP, 1FJ5542-UP, 2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP,
BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP, BMK1-UP

D6R/H XR (40 SECTION): 5KK340-UP, 6CK381-UP, 7ZK5500-UP, 1YL320-UP, 2BL346-UP, 2TL5500-UP,

7KN1-UP, 9MN1-UP, 7DR1-UP, 6JN1-UP, 8XN1-UP, 6HR1-UP, 7CR1-UP

D6R/H XL, XW (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,
4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,
FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP

D6R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP,
4GG5500-UP, 8LN1-UP, 4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP,
BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP,
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART STD XR XL/XW LGP

NUMBER 39 Section 40 Section 41 Section 45 Section
Link Assembly (Quantity 2) 152-8053 152-8048 152-8050 152-8049
Track Links
RH Pin End Master 8E-7407 1 1 1 1
LH Pin End Master 8E-7408 1 1 1 1
2
RH Bushing End Master 165-1756 1 1 1 1
2
LH Bushing End Master 165-1757 1 1 1 1
RH Regular 2 165-1754 38 39 40 44
LH Regular 2 165-1755 38 39 40 44
Other Components
Pin 160-7821 39 40 41 45
Bushing 165-1769 39 40 41 45
Seal Assembly (Rigid) 207-0544 156 160 164 180
Thrust Ring 152-8071 156 160 164 180
Stopper 5G-2247 39 40 41 45
Plug 6Y-0473 39 40 41 45
3
Track Hardware
Bolt 6V-1792 152 156 160 176
Nut 1S-1860 152 156 160 176
Master Bolt 9S-1838 4 4 4 4
1 Rotating Bushing Track is an application specific undercarriage designed for high abrassion/low impact applications (4,000 hour system life or
less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-5 for installation and guarding information. Also refer to
Special Instruction SEHS9585 for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is
not for use on Track Skidders.
2 Joint assembly (Includes link and insert). Insert not serviced.
3 Not part of link assembly; required to assemble track group.

68
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H STD/XR/XL/LGP HYBRID TRACK

D6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499,
6CF1-5555, 4LG1-5595, 1FJ1-5541
D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499
D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-457, 8SK1-5499, 9RK1-5499
D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289,
4GG1-5499
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART STD XR XL/XW LGP

NUMBER 39 Section 40 Section 41 Section 45 Section
Link Assembly -- 45 Section 236-9864 1 236-9865 1 236-9866 1 236-9874 1
Track Links
RH Pin End Master 228-2737 1 1 1 1
LH Pin End Master 228-2738 1 1 1 1
RH Bushing End Master 228-2739 1 1 1 1
LH Bushing End Master 228-2740 1 1 1 1
RH Regular 228-2735 38 39 40 44
LH Regular 228-2736 38 39 40 44
Other Components
Pin 160-7819 2 39 40 41 45
Bushing 230-4512 39 40 41 45
Seal Assembly (Rigid) 207-0544 78 80 82 90
Thrust Ring 152-8071 78 80 82 90
Stopper 5G-2247 39 40 41 45
Plug 6Y-0473 39 40 41 45
3
Track Hardware
Bolt (Grouser Shoe) 1S-1859 152 156 160 176
Bolt (Self-Cleaning Shoe) 1S-1859 88
Bolt (Self-Cleaning Shoe) 5A-7524 88
Nut 1S-1860 152 156 160 176
Master Bolt (Grouser Shoe) 9S-1838 4
Master Bolt (Self-Cleaning Shoe) 3P-1111 2
Master Bolt (Self-Cleaning Shoe) 9S-1838 4 4 4 2
Special Sets/Groups
Seal Set (90 Seal Assemblies) 256-9360 1 1 1 1
Bushing and Seal Group (37 Sections) 293-9147 1 1 1 1
1 See table titled "D6R/H Hybrid Track Shoes" for selections.
2 Former pin 3P-1108 (Use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

69
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H STD/XR/XL/LGP SEALED AND LUBRICATED TRACK

D6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499,
6CF1-5555, 4LG1-5595, 1FJ1-5541
D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499
D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-457, 8SK1-5499, 9RK1-5499
D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289,
4GG1-5499
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART STD XR XL/XW LGP

NUMBER 39 Section 40 Section 41 Section 45 Section
Link Assembly (Quantity 2) 8E-4326 1 8E-4327 2 9U-9062 3 8E-4328 4
Track Links
RH Pin End Master 8E-2357 1 1 1 1
LH Pin End Master 8E-2358 1 1 1 1
RH Bushing End Master 8E-2359 1 1 1 1
LH Bushing End Master 8E-2360 1 1 1 1
RH Regular 8E-2355 38 39 40 44
LH Regular 8E-2356 38 39 40 44
Other Components
Pin 160-7819 5 39 40 41 45
6
Bushing 6Y-0930 39 40 41 45
Seal Assembly (Rigid) 207-0544 78 80 82 90
Thrust Ring 152-8071 78 80 82 90
Stopper 5G-2247 39 40 41 45
Plug 6Y-0473 39 40 41 45
7
Track Hardware
Bolt (Grouser Shoe) 6V-1792 152 156 160 176
Bolt (Self-Cleaning Shoe) 6T-2162 88
Bolt (Self-Cleaning Shoe) 6V-1792 88
Nut 1S-1860 152 156 160 176
Master Bolt (Grouser Shoe) 9S-1838 4 4 4 4
Master Bolt (Self-Cleaning Shoe) 3P-1111 2
Master Bolt (Self-Cleaning Shoe) 9S-1838 2
Special Sets/Groups
Seal Set (90 Seal Assemblies) 256-9360 1 1 1 1
Bushing and Seal Group (39 Sections) 6Y-5406 1 1 1 1
1 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9668) allows reuse of current
shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existing guards) or SEHS9350
(installing new guards). or (B) Upgrade to hybrid link assembly (236-9864) requires new shoes due to different bolt hole pattern, see table titled
"D6H Hybrid Track Shoes" for selections.
2 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9670) allows reuse of current
shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existing guards) or SEHS9350
(installing new guards). or (B) Upgrade to hybrid link assembly (236-9865) requires new shoes due to different bolt hole pattern, see table titled
"D6H Hybrid Track Shoes" for selections.
3 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9671) allows reuse of current
shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existing guards) or SEHS9350
(installing new guards). or (B) Upgrade to hybrid link assembly (236-9864) requires new shoes due to different bolt hole pattern, see table titled
"D6H Hybrid Track Shoes" for selections.
4 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (8E-9037) allows reuse of current
shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existing guards) or SEHS9350
(installing new guards). or (B) Upgrade to hybrid link assembly (236-9874) requires new shoes due to different bolt hole pattern, see table titled
"D6H Hybrid Track Shoes" for selections.
5 Former pin 3P-1108 (Use 9G-1642 stopper).
6 Straight wall bushings (9G-8734), used in early Crescent Seal Link Assemblies remain serviceable through Parts.
7 Not part of link assembl; required to assemble track group.

70
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R/D6H LGP HEAVY DUTY QUAD TRACK 1

8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 45 Section 2 8E-9037 2
Components of Outrigger Chain: (Serviced Individually; quantities shown are per side)
Track Links
RH Pin End Master 1 8E-7407
LH Pin End Master 1 8E-7408
RH Bushing End Master 1 8E-7409
LH Bushing End Master 1 8E-7410
RH Regular 44 8E-7405
LH Regular 44 8E-7406
Other Components
Stub Pin 90 106-8237
Stub Bushing 90 106-8235
3
Track Hardware (Quantities shown are per side -- 1 center chain; 2 outrigger chains)
Bolt 352 6V-1792
Nut 352 1S-1860
Master Bolt 8 9S-1838
1 When installing Heavy Duty Track on existing machines, refer to IRM UC92-20 for installation and guarding information. Also refer to Special
Instruction SEHS9585 for additional guarding information.
2 Refer to Heavy Duty Track section for component information.
3 Not part of link assembly; required to assemble track group.

71
Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H SystemOne TRACK SHOES

8.00" (203.2 mm) PITCH - 22 mm BOLT

MASTER
SHOE PART
TYPE WIDTH PART NUMBER NUMBER
Moderate Service 20.0" (510mm) 246-5207 254-4474
Moderate Service 22.0" (560 mm) 234-9704 254-4472
Moderate Service (Offset RH) 1 22.0" (560 mm) 266-0083 --
1
Moderate Service (Offset LH) 22.0" (560 mm) 266-0084 --
Moderate Service 24.0" (610mm) 234-9705 254-4470
Moderate Service (Center Hole) 24.0" (610 mm) 283-8705 2 --
Moderate Service 28.0" (710 mm) 289-5214 --
Moderate Service (Clipped Grouser) 28.0" (710 mm) 294-0571 2 --
2
Moderate Service (Offset RH) 28.0" (710 mm) 266-0088 --
2
Moderate Service (Offset LH) 28.0" (710 mm) 266-0089 --
Moderate Service (Clipped Grouser) (Offset RH) 3 28.0" (710 mm) 273-1685 2 --
3 2
Moderate Service (Clipped Grouser) (Offset LH) 28.0" (710 mm) 273-1686 --
Moderate Service 30.0" (760 mm) 235-1397 254-4467
Moderate Service (Center Hole) 30.0" (760 mm) 283-8707 2 --
Moderate Service (Offset RH) 31.0" (790 mm) 294-0569 --
Moderate Service (Offset LH) 31.0" (790 mm) 294-0570 --
Moderate Service (Offset RH) 32.0" (810 mm) 237-8052 --
Moderate Service (Offset LH) 32.0" (810 mm) 237-7607 --
Moderate Service (Offset RH) 4 35.0" (900 mm) 265-8320 2 --
4 2
Moderate Service (Offset LH) 35.0" (900 mm) 265-8321 --
Moderate Service 36.0" (915 mm) 234-9700 254-0230
Extreme Service 20.0" (510 mm) 246-5205 254-4475
Extreme Service 22.0" (560 mm) 246-5140 254-4473
Extreme Service (Center Hole) 22.0" (560 mm) 283-8702 2 --
Extreme Service 24.0" (610 mm) 246-5203 254-4471
2
Extreme Service (Clipped Grouser) 24.0" (610 mm) 274-2008 --
Extreme Service (Center Hole) 24.0" (610 mm) 270-2672 291-9151
Extreme Service (Offset RH) 24.0" (610 mm) 297-8456 2 297-8460 2
Extreme Service (Offset LH) 24.0" (610 mm) 297-8455 2 297-8459 2
Extreme Service (Offset RH) (Clipped Grouser) 24.0" (610 mm) 297-8454 297-8458 2
Extreme Service (Offset LH) (Clipped Grouser) 24.0" (610 mm) 297-8453 297-8457 2
Extreme Service (Offset RH) (Clipped Grouser) 26.0" (660 mm) 283-8714 290-2240 2
Extreme Service (Offset LH) (Clipped Grouser) 26.0" (660 mm) 283-8715 290-2239 2
Extreme Service 28.0" (710 mm) 294-0567 2 --
Extreme Service (Center Hole) 28.0" (710 mm) 291-5594 2 --
Extreme Service 30.0" (760 mm) 237-7531 254-4469
Extreme Service (Center Hole) 30.0" (760 mm) 246-5213 254-4468
Extreme Service (Offset RH) 31.0" (790 mm) 294-0574 2 --
2
Extreme Service (Offset LH) 31.0" (790 mm) 294-0575 --
Extreme Servoce (Offset RH) (Clipped Grouser) 32.0" (810 mm) 283-8709 254-0232

72
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H SystemOne TRACK SHOES (CONT)

8.00" (203.2 mm) PITCH - 22 mm BOLT

MASTER
SHOE PART
TYPE WIDTH PART NUMBER NUMBER
Extreme Service (Offset LH) (Clipped Grouser) 32.0" (810 mm) 283-8710 254-0235
Extreme Service 36.0" (915 mm) 242-8904 254-0234
Extreme Service (Center Hole) 36.0" (915 mm) 246-5211 254-0233
Self - Cleaning 39.0" (1000 mm) 200-5856 --
1 To be used on XL machines equipped with a PAT Blade.
2 Track shoe is made as ordered (MAO) (not stocked in parts distribution centers) and typically has a 6-12 week lead-time.
3 To be used on XW machines equipped with a PAT Blade.
4 To be used on LGP machines equipped with a PAT Blade.

73
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
(PER MACHINE) WIDTH NUMBER NUMBER STD XR XL LGP
Extreme Service 18.0" (460 mm) 6Y-6390 6Y-6392 Y Y N N
Extreme Service 20.0" (510 mm) 6Y-6391 6Y-6394 Y Y Y N
Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4935 1Q-4996 Y Y Y N
Extreme Service 22.0" (560 mm) 6Y-6389 6Y-6412 Y Y Y N
Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 1Q-4625 1Q-4626 Y Y Y N
Extreme Service (Offset RH) 1 22.0" (560 mm) 252-9705 252-9707 N N Y N
1
Extreme Service (Offset LH) 22.0" (560 mm) 252-9706 252-9708 N N Y N
Extreme Service 24.0" (610 mm) 1Q-4930 6Y-6397 Y Y Y Y
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 157-1373 157-1374 Y Y Y Y
Extreme Service 28.0" (710 mm) 218-3387 218-3388 N N N Y
Extreme Service 30.0" (760 mm) 138-5774 6Y-6404 N N N Y
Extreme Service (Trapezoidal Opening) 30.0" (760 mm) 1Q-4973 1Q-4607 N N N Y
Extreme Service 36.0" (915 mm) 169-5868 169-5867 N N N Y
Extreme Service (Trapezoidal Opening) 36.0" (915 mm) 1Q-4728 1Q-4729 N N N Y
Moderate Service 20.0" (510 mm) 6Y-6285 6Y-6292 Y Y Y N
Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4924 1Q-4994 Y Y Y N
Moderate Service 22.0" (560 mm) 6Y-6286 6Y-6294 Y Y Y N
Moderate Service (Trapezoidal Opening) 22.0" (560 mm) 1Q-4926 1Q-4995 Y Y Y N
Moderate Service (Offset RH) 1 22.0" (560 mm) 160-4939 160-5798 N N Y N
1
Moderate Service (Offset LH) 22.0" (560 mm) 160-4940 160-5799 N N Y N
Moderate Service (Trapezoidal Opening) (RH 22.0" (560 mm) 171-2387 171-2386 N N Y N
Offset) 1
Moderate Service (Trapezoidal Opening) (LH 22.0" (560 mm) 171-2383 171-2382 N N Y N
Offset) 1
Moderate Service 24.0" (610 mm) 6Y-6287 6Y-6296 Y Y Y Y
Moderate Service (Trapezoidal Opening) 24.0" (610 mm) 1Q-4958 1Q-4997 Y Y Y Y
Moderate Service 26.0" (660 mm) 133-2890 6Y-6298 Y Y Y Y
Moderate Service 28.0" (710 mm) 125-5167 125-5163 N N N Y
Moderate Service (RH Offset) 2 28.0" (710 mm) 185-5253 185-5254 N N Y N
Moderate Service (LH Offset) 2 28.0" (710 mm) 185-5256 185-5257 N N Y N
Moderate Service 30.0" (760 mm) 6Y-8973 6Y-6300 N N N Y
Moderate Service (Trapezoidal Opening) 30.0" (760 mm) 1Q-4744 1Q-4745 N N N Y
Moderate Service 33.5" (850 mm) 200-6493 200-6494 N N N Y
Moderate Service 36.0" (915 mm) 196-7839 196-1236 N N N Y
Moderate Service (Trapezoidal Opening) 36.0" (915 mm) 196-1233 196-1232 N N N Y
3
Moderate Service (RH Offset) 36.0" (915 mm) 200-6495 200-6496 N N N Y
Moderate Service (Offset LH) 3 36.0" (915 mm) 200-6497 200-6498 N N N Y
Double Grouser 20.0" (510 mm) 8E-4498 8E-6114 Y N N N
Double Grouser 21.7" (550 mm) 127-7009 8E-4497 Y N N N
Self-Cleaning 39.0" (990 mm) 116-8545 116-8548 N N N Y
Quad (MS) 36.0" (915 mm) 196-1235 196-1234 N N N Y
1 To be used on XL machines equipped with a PAT Blade.
2 To be used on XW machines equipped with a PAT Blade.
3 To be used on LGP machines equipped with a PAT Blade.

74
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H HYBRID TRACK SHOES

USE WITH TRACK LINKS 228-2735, 228-2736
8.00" (203.2 mm) PITCH -- 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER STD XR XL LGP
Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392 Y Y N N
Extreme Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4985 1Q-4984 Y Y Y N
Extreme Service 20.0" (510 mm) 6Y-6395 6Y-6394 Y Y Y N
Extreme Service 22.0" (560 mm) 6Y-6411 6Y-6412 Y Y Y N
Extreme Service 24.0" (610 mm) 6Y-6398 6Y-6397 Y Y Y Y
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 3Q-5391 1 157-1374 Y Y Y Y
Extreme Service 30.0" (760 mm) 6Y-6405 6Y-6404 N N N Y
Extreme Service 36.0" (915 mm) 6Y-6401 169-5867 N N N Y
Moderate Service 20.0" (510 mm) 6Y-6291 6Y-6292 Y Y Y N
Moderate Service 22.0" (560 mm) 6Y-6293 6Y-6294 Y Y Y N
Moderate Service 24.0" (610 mm) 6Y-6295 6Y-6296 Y Y Y Y
Moderate Service 26.0" (660 mm) 6Y-6297 6Y-6298 Y Y Y Y
Moderate Service 30.0" (760 mm) 6Y-6299 6Y-6300 N N N Y
Moderate Service 36.0" (915 mm) 196-1237 196-1236 N N N Y
Double Grouser 21.7" (550 mm) 8E-4496 8E-4497 Y N N N
Self-Cleaning 36.0" (915 mm) 3P-1134 3P-1133 N N N Y
1 Clipped Grouser

D6T, D6R, D6H SPROCKETS

SystemOne, Heavy Duty, Hybrid, Rotating Bushing, and Sealed and Lubricated Track

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 173-0946
Bolt 25 6V-0937
Nut 25 7H-3607
Washer 25 2S-5658

75
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H, SystemOne CENTER TREAD IDLER

STD, XL, XW, IG, LGP

PART
(Per Machine) QUANTITY NUMBER
Group 4 286-9305
Components of Group
Idler Assembly 1 286-9306
1
Bearing 2 9P-2245
Shaft 1 149-2494
Collar 2 107-3945
Retainer 2 149-2495
Thrust Washer 2 2 106-7691
Bolt 24 1T-0765
Washer 24 5M-2894
Seal -- Duo-Cone Group (Symmetric Seal) 2 162-7862
Toric Ring 1 2 162-2166
Seal -- Retainer 2 2H-3928
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
1Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.

76
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H, STD SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT

PART
(PER MACHINE) QUANTITY NUMBER
Hardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4691
Components of Idler Hardware Arrangement
Shim (Permanent) (6mm) 8 233-4846
Shim (Adjustable) (10mm) 8 156-5342
Bolt (20mm) (D6R) 16 8T-0656
Washer (20mm) (D6R) 16 153-5044
Bolt (3/4") (D6H) 16 6K-1330
Washer (3/4") (D6H) 16 5P-8248
Plate- Scraper Base (Weld on top of frame) 4 234-4319
Side Scraper (Bolts to scraper base plate) 8 238-0452
Tread Scraper (Bolts to scraper base plate) 4 238-0453
Scraper Bolt (12mm) 32 8T-4139
Scraper Washer (12mm) 32 5P-1076
Plate Assembly (Weld to front end guide) 1 2 283-5249
Plate Assembly (Weld to front end guide) 1 2 283-5250
Plate Assembly (Weld to rear end guide) 1 2 283-5253
1
Plate Assembly (Weld to rear end guide) 2 283-5254
Plate - Scraper (Bolts to end guides) 8 282-4017
Bolt (12 mm) (Plate to end guide) 24 8T-4194
Washer (Plate to end guide) 24 5P-1076
2
End Cap (Abutment Style) 8 152-3421
Block 2 8 165-6946
1 Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holes in the end
guides to mount the scraper plates.
2 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

77
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H, XL, XW, IG SystemOne CENTER TREAD IDLER HARDWARE
ARRANGEMENT

PART
(PER MACHINE) QUANTITY NUMBER
Hardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4692
Components of Idler Hardware Arrangement
Shim (Permanent) (6mm) 8 233-4846
Shim (Adjustable) (10mm) 8 156-5342
Bolt (20mm) (D6R) 16 8T-0656
Washer (20mm) (D6R) 16 153-5044
Bolt (3/4") (D6H) 16 6K-1330
Washer (3/4") (D6H) 16 5P-8248
Plate- Scraper Base (Weld toTop front Track Roller Frame) 2 234-4320
Plate- Scraper Base (Weld to Top Rear Track Roller Frame) 2 234-4319
Side Scraper (Front) (Bolt to Scraper Base Plate) 4 238-0450
Side Scraper (Rear) (Bolt to Scraper Base Plate) 4 238-0452
Tread Scraper 4 238-0453
Scraper Bolt (12mm) 32 8T-4139
Scraper Washer (12mm) 32 5P-1076
Plate Assembly (Weld to Rear End Guide) 1 2 283-5251
Plate Assembly (Weld to Rear End Guide) 1 2 283-5252
1
Plate (Weld to Front End Guide) 4 279-4242
Plate Scraper (Front) (Bolts to End Guide) 4 279-4243
Bolt (12 mm) (Plate Scraper to End Guide) 12 8T-4183
Washer (12 mm) (Plate Scraper to End Guide) 12 5P-1076
Plate Scraper (Rear) (Bolts to End Guide) 4 282-4017
Bolt (12 mm) (Plate Scraper to End Guide) 12 8T-4194
Washer (12 mm) (Plate Scraper to End Guide) 12 5P-1076
End Cap (Abutment Style) 2 8 152-3421
2
Block 8 165-6946
1 Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holes in the end
guides to mount the scraper plates.
2 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

78
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H, LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT

PART
(PER MACHINE) QUANTITY NUMBER
Hardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4693
Components of Idler Hardware Arrangement
End Cap (Abutment Style) (Front LH) 2 159-3662
End Cap (Abutment Style) (Front RH) 2 160-6910
End Cap (Abutment Style) (Rear LH) 2 174-8783
End Cap (Abutment Style) (Rear RH) 2 174-8786
Block (Front LH) 2 233-4848
Block (Front RH) 2 233-4851
Block (Rear LH) 2 174-8788
Block (Rear RH) 2 174-8789
Shim (Front) 4 156-5342
Shim (Rear) 8 174-8790
Bolt (20mm) (D6R) 16 8T-0657
Washer (20mm) (D6R) 16 153-5044
Bolt (3/4") (D6H) 16 1D-4617
Washer (3/4") (D6H) 16 5P-8248
Plate- Scraper Base (Weld of top of frame) 4 234-4319
Side Scraper (Bolts to scraper base plate) 8 238-0452
Tread Scraper (Bolts to scraper base plate) 4 238-0453
Scraper Bolt (12mm) 32 8T-4139
Scraper Washer (12mm) 32 5P-1076
Plate Assembly (Weld to front end guide) 1 2 283-5249
Plate Assembly (Weld to front end guide) 1 2 283-5250
Plate Assembly (Weld to rear end guide) 1 2 283-5253
1
Plate Assembly (Weld to rear end guide) 2 283-5254
Plate - Scraper (Bolts to end guides) 8 282-4017
Bolt (12 mm) (Plate to end guide) 24 8T-4194
Washer (12 mm) (Plate to end guide) 24 5P-1076
1Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holes in the end
guides to mount the scraper plates.

79
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T STD/XL/XW, D6R STD/XL/XW, D6H STD/XL IDLERS

INCREASED TREAD WEAR MATERIAL

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group (Large Diameter - 570 mm tread) 4 -- 202-4304
Components of Group
Idler Assembly (Large Diameter) 1 202-4303 202-4303
1
Bearing 2 9P-2245 9P-2245
Shaft 1 6T-3220 149-2494
Collar 2 -- 107-3945
Retainer 2 9G-9349 149-2495
Thrust Washer 2 2 106-7691 106-7691
Bolt 24 0S-1594 1T-0765
Washer 24 5M-2894 5M-2894
Stabilizer Ring 2 6T-4871 --
Seal -- Duo-Cone Group (Inverted Seal) 2 7T-0158 --
1
Toric Ring 1 6P-8912 --
O-Ring 1 1 6V-2701 --
Seal -- Duo-Cone Group (Symmetric Seal) 2 -- 162-7862
Toric Ring 2 -- 162-2166
Seal -- Retainer 2 2H-3928 2H-3928
Seal -- Collar 2 -- 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware (D6H)
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (3/4") 4 1D-4615 1D-4615
Washer (3/4") 4 5P-8248 5P-8248
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Mounting Hardware (D6R) 3
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (20 mm) 4 6V-9167 6V-9167
Washer (20 mm) 4 8T-3282 8T-3282
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Special Application Arctic Idler Group
Idler Group (Large Diameter) 4 - 205-0709
Seal -- Duo-Cone Group (Symmetric Seal) 2 - 162-7862
Toric Ring 2 - 162-2166
Seal -- Duo-Cone Group (Inverted Seal) 2 7T-4722 --
Toric Ring 1 7T-1094 --
O-Ring 1 8T-2272 --
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

80
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R/D6H XR IDLERS
INCREASED TREAD WEAR MATERIAL

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group (Small Diameter - 545 mm tread) 4 -- 202-4296
Components of Group
Idler Assembly (Small Diameter) 1 202-4295 202-4295
1
Bearing 2 9P-2245 9P-2245
Shaft 1 6T-3220 149-2494
Collar 2 -- 107-3945
Retainer 2 9G-9349 149-2495
Thrust Washer 2 2 106-7691 106-7691
Bolt 24 0S-1594 1T-0765
Washer 24 5M-2894 5M-2894
Stabilizer Ring 2 6T-4871 --
Seal -- Duo-Cone Group (Inverted Seal) 2 7T-0158 --
1
Toric Ring 1 6P-8912 --
O-Ring 1 1 6V-2701 --
Seal -- Duo-Cone Group (Symmetric Seal) 2 -- 162-7862
Toric Ring 2 -- 162-2166
Seal -- Retainer 2 2H-3928 2H-3928
Seal -- Collar 2 -- 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware (D6H)
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (3/4") 4 1D-4615 1D-4615
Washer (3/4") 4 5P-8248 5P-8248
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Mounting Hardware (D6R) 3
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (20 mm) 4 6V-9167 6V-9167
Washer (mm) 4 8T-3282 8T-3282
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4722 --
Toric Ring 1 7T-1094 --
O-Ring 1 8T-2272 --
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

81
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T/D6R/D6H LGP IDLERS 1

INCREASED TREAD WEAR MATERIAL
4HN0709-UP, 4TR1123-UP, 6GR0708-UP, 7AR0717-UP, 8TM1303-UP, 9PN1851-UP, 8LN0547-UP

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group (Small Diameter - 545 mm tread) 4 -- 202-4296
Components of Group
Idler Assembly (Small Diameter) 1 202-4295 202-4295
2
Bearing 2 9P-2245 9P-2245
Shaft 1 6T-3220 149-2494
Collar 2 -- 107-3945
Retainer 2 9G-9349 149-2495
Thrust Washer 3 2 106-7691 106-7691
Bolt 24 0S-1594 1T-0765
Washer 24 5M-2894 5M-2894
Stabilizer Ring 2 6T-4871 --
Seal -- Duo-Cone Group (Inverted Seal) 2 7T-0158 --
2
Toric Ring 1 6P-8912 --
O-Ring 2 1 6V-2701 --
Seal -- Duo-Cone Group (Symmetric Seal) 2 -- 162-7862
Toric Ring 2 -- 162-2166
Seal -- Retainer 2 2H-3928 2H-3928
Seal -- Collar 2 -- 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
4
Mounting Hardware (D6H)
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (3/4") 4 1D-4615 1D-4615
Washer (3/4") 4 5P-8248 5P-8248
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Mounting Hardware (D6R) 4
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (20 mm) 4 6V-9167 6V-9167
Washer (20 mm) 4 8T-3282 8T-3282
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4722 --
Toric Ring 1 7T-1094 --
O-Ring 1 8T-2272 --
1 Effective serial numbers when D6R's were equipped with 4 small idlers (small diameter)1KD1-401, 1KD662-UP, 2TG544-UP, 3YG557-UP,
4GG466-UP, 4HN1-UP, 4TR1-UP, 5HF442-UP, 6FC718-UP, 6GR1-UP, 7AR1-UP, 8FC1-460, 8FC965-UP, 8LN1-UP, 8TM1-UP, 8YC1-472,
8YC476, 8YC478, 8YC480-481, 8YC483, 9PN1-UP
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
4 These components are not included in the idler group; quantities shown are required to mount each idler.

82
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H LGP IDLERS

INCREASED TREAD WEAR MATERIAL
FRONT IDLERS LARGE DIAMETER, REAR IDLERS SMALL DIAMETER
1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-441, 6FC1-717, 8FC461-964, 8YC473-UP

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group (Front, Large Diameter - 570 mm tread) 2 -- 202-4304
Group (Rear, Small Diameter - 545 mm tread) 2 -- 202-4296
Components of Group
Idler Assembly (Large Diameter) 1 202-4303 202-4303
Idler Assembly (Small Diameter) 1 202-4295 202-4295
1
Bearing 2 9P-2245 9P-2245
Shaft 1 6T-3220 149-2494
Collar 2 -- 107-3945
Retainer 2 9G-9349 149-2495
Thrust Washer 2 2 106-7691 106-7691
Bolt 24 0S-1594 1T-0765
Washer 24 5M-2894 5M-2894
Stabilizer Ring 2 6T-4871 --
Seal -- Duo-Cone Group (Inverted Seal) 2 7T-0158 --
Toric Ring 1 1 6P-8912 --
1
O-Ring 1 6V-2701 --
Seal -- Duo-Cone Group (Symmetric Seal) 2 -- 162-7862
Toric Ring 2 -- 162-2166
Seal -- Retainer 2 2H-3928 2H-3928
Seal -- Collar 2 -- 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (3/4") 4 1D-4615 1D-4615
Washer (3/4") 4 5P-8248 5P-8248
Shim (Front Idlers Only) 2 8G-9530 8G-9530
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4722 --
Toric Ring 1 7T-1094 --
O-Ring 1 8T-2272 --
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

83
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H LANDFILL/SPECIAL APPLICATION IDLERS

INCREASED TREAD WEAR MATERIAL
STD, XL XR, LGP
(LARGE (SMALL
THREAD DIA.) THREAD DIA.)
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Group 4 206-1895 206-1897
Components of Group
Idler Assembly 1 202-4303 202-4295
Bearing 1 2 9P-2245 9P-2245
Shaft 1 149-2494 149-2494
Collar 2 167-1951 167-1951
Ring 2 170-0792 170-0792
Seal 2 167-1952 167-1952
Retainer 2 167-1950 167-1950
Washer 2 2 106-7691 106-7691
Bolt 24 9B-7237 9B-7237
Washer 24 8T-4896 8T-4896
Seal -- Duo-Cone Group (Symmetric Seal) 2 162-7862 162-7862
1
Toric Ring 2 162-2166 162-2166
Seal -- Retainer 2 2H-3928 2H-3928
Seal -- Collar 2 7J-2036 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 152-3421 152-3421
Block 2 165-6946 165-6946
Bolt (20 mm) 4 6V-9167 6V-9167
Washer (20 mm) 4 8T-3282 8T-3282
Shim (Front Idlers Only) 2 8G-9530 8G-9530
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

84
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R, D6H, CENTER TREAD IDLER 1

STD, XL, XW, LGP CURRENT DESIGN
TO BE USED WITH ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 286-9305
Components of Group
Idler Assembly 1 286-9306
2
Bearing 2 9P-2245
Shaft 1 149-2494
Collar 2 107-3945
Retainer 2 149-2495
Thrust Washer 3 2 106-7691
Bolt 24 1T-0765
Washer 24 5M-2894
Seal -- Duo-Cone Group (Symmetric Seal) 2 162-7862
Toric Ring 2 162-2166
Seal -- Retainer 2 2H-3928
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
4
Mounting Hardware (D6R/H STD, XL, XW)
End Cap (Abutment Style) 2 152-3421
Block 2 165-6946
Shim (Permanent) 2 233-4846
Shim (Adjustable) 2 156-5342
Bolt (20mm) (D6R) 4 8T-0656
Washer (20mm) (D6R) 4 198-4769
Bolt (3/4") (D6H) 4 6K-1330
Washer (3/4") (D6H) 4 5P-6652
4
Mounting Hardware (D6R/H LGP)
End Cap (Abutment Style)(Front LH) 1 160-6910
End Cap (Abutment Style)(Front RH) 1 159-3662
End Cap (Abutment)(Rear LH) 1 174-8783
End Cap (Abutment)(Rear RH) 1 174-8786
Block (Front LH) 1 233-4851
Block (Front RH) 1 233-4848
Block (Rear LH) 1 174-8788
Block (Rear RH) 1 174-8789
Shim (Front) 2 156-5342
Shim (Rear) 4 174-8790
Bolt (20mm)(Front)(D6R) 4 8T-0656
Washer (20mm)(Front)(D6R) 4 8T-3282
Bolt (20mm)(Rear)(D6R) 4 8T-0657
...............................................................CONTINUED (NEXT PAGE)

85
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R, D6H, CENTER TREAD IDLER 1 (CONT)

STD, XL, XW, LGP CURRENT DESIGN
TO BE USED WITH ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Washer (20mm)(Rear)(D6R) 4 8T-3282
Bolt (3/4")(Front)(D6H) 4 6K-1330
Washer (3/4")(Front)(D6H) 4 5P-8248
Bolt (3/4")(Rear)(D6H) 4 1D-4617
Washer (3/4")(Rear)(D6H) 4 5P-8248
1 Complete field arrangements for machine retrofit: D6RH STD (228-7891), D6R/H XL,XW,IG (228-7889), D6R/H LGP (228-7887).
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
4 These components are not included in the idler group; quantities shown are required to mount each idler.

86
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R, D6H, CENTER TREAD IDLER

STD, XL, LGP, FORMER DESIGN
TO BE USED WITH ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 174-6897
Components of Group
Idler Assembly 1 159-3658
1
Bearing 2 9P-2245
Shaft 1 149-2494
Collar 2 107-3945
Retainer 2 149-2495
Thrust Washer 2 2 106-7691
Bolt 24 1T-0765
Washer 24 5M-2894
Seal -- Duo-Cone Group (Symmetric Seal) 2 162-7862
Toric Ring 2 162-2166
Seal -- Retainer 2 2H-3928
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
3
Mounting Hardware (D6R/H, STD, XL)
End Cap (Abutment Style)(RH) 1 160-6910
End Cap (Abutment Style)(LH) 1 159-3662
Block (RH) 1 174-9228
Block (LH) 1 174-9226
Shim 2 156-5342
Bolt (3/4")(D6H) 4 6K-1330
Washer (3/4")(D6H) 4 5P-8248
Bolt (20mm)(D6R) 4 8T-0656
Washer (20mm)(D6R) 4 8T-3282
Mounting Hardware (D6R/H, LGP) 3
End Cap (Abutment Style)(RH) 1 174-8783
End Cap (Abutment Style)(LH) 1 174-8786
Block (RH) 1 174-8788
Block (LH) 1 174-8789
Shim 2 174-8790
Bolt (3/4")(D6H) 4 1D-4616
Washer (3/4")(D6H) 4 5P-8248
Bolt (20mm)(D6R) 4 8T-0656
Washer (20mm)(D6R) 4 8T-3282
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
1067691 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

87
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H SystemOne CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 235-5974

D6T, D6R, D6H CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6Y-1781
Group
Roller Shell 1 9S-8320
Shaft 1 6Y-2043
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Washer 3 5M-2894
Bolt 2 5K-9107
Plate 1 8P-6188
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

88
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H SystemOne TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group -1 235-4157
2
Mounting Hardware (D6T/R)
Cap 2 214-1109
Bolt (20 mm) 4 8T-0360
Washer 4 8T-3282
Mounting Hardware (D6H) 2
Cap 2 317-9080
Bolt (3/4") 4 1D-4610
Washer 4 5H-1504
1 12 required for STD machines; 14 required for XL, XW, and IG machines; 16 required for LGP machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

D6T, D6R, D6H STANDARDIZED TRACK ROLLERS

WITH END CAPS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 41 288-0935
Single Flange (SF) 8 288-0934
1
Double Flange (DF) (Arctic) 4 288-0946
Single Flange (SF) (Arctic) 8 288-0945
1
Double Flange (DF) (High Heat) 4 288-0948
Single Flange (SF) (High Heat) 8 288-0947
2
Double Flange (DF) (Tall) - 288-0936
3
Mounting Hardware (D6T/R)
Cap 2 317-9080
Bolt (20 mm) 4 8T-0360
Washer 4 8T-3282
Mounting Hardware (D6H) 3
Cap 2 317-9079
Bolt (3/4") 4 1D-4610
Washer 4 5P-8248
1 8 DF rollers for LGP, 6 DF rollers for XR, XL, XW, and IG machines.
2 Optional (DF) roller for guiding. Use quantity required for specific roller frame type.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

89
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R, D6H TRACK ROLLERS

END COLLARS, SYMMETRIC SEAL DESIGN

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 41 231-3088 2
Single Flange (SF) 8 231-3087 3
Double Flange, Tall (DF, Tall) -4 231-3089 5
Components of Group
Roller Shell (DF) 1 120-5767 2
Roller Shell (SF) 1 120-5753 3
Double Flange, Tall (DF, Tall) 1 120-5804 5
Bushing Assembly 2 116-6698
Bearing 6 1 8P-5197
Shaft 1 116-6702 7
End Collar 2 120-5785
Ring (Retaining-Snap) 2 117-9748
Ring (Lock) 2 5M-4443
Seal -- Duo-Cone Group 2 171-5882
Toric Ring 6 2 162-2166
Seal -- Bushing O-Ring 2 2H-3928
Seal -- Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware (D6H) 8
Bolt (3/4") 4 1D-4608
Washer 4 5H-1504
8
Mounting Hardware (D6T/R)
Bolt (20 mm) 4 6V-5845
Washer 4 8T-3282
1 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.
2 For D6T/R Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6H
Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
3 For D6T/R Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6H
Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
4 Optional DF rollers for guiding. Use quantity required for specific roller frame type.
5 For D6T/R Serviced Replaced By: 1 - Roller Group (DF Tall) 288-0936, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6H
Serviced Replaced By: 1 - Roller Group (DF Tall) 288-0936, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
7 For D6T/R Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap 317-9080, 4 - Bolt
8T-0360, 4 - Washer 8T-3282. For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap
317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
8 These components are not included in the roller group; quantities shown are required to mount each roller.

90
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 41 --
Single Flange (SF) 8 --
Components of Group
Roller Shell (DF) 1 7T-4106 2
Roller Shell (SF) 1 7T-4101 3
Bearing 2 9P-2245
Shaft 1 6T-0720 4
Retainer Assembly 2 7T-4152
Thrust Washer 5 1 9W-2423
Dowel 6 4 2H-1190
Bolt (Retainer) 12 0S-1594
Washer (Retainer) 12 5M-2894
Stabilizer Ring 2 7T-4031
Seal -- Duo-Cone Group 2 7T-0158
6
Toric Ring 1 6P-8912
6
Ring 1 6V-2701
Seal -- Retainer O-Ring 2 5F-3144
Stopper 1 7G-4332
Plug 1 6Y-0473
7
Mounting Hardware
End Cap 2 6T-4861
Bolt (3/4") 4 1D-4610
Washer 4 5P-8248
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4722
Toric Ring 1 7T-1094
O-Ring 6 1 8T-2272
1 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.
2 For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
3 For D6H Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
4 For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -
Washer 5P-8248
5 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
7 These components are not included in the roller group; quantities shown are required to mount each roller.

91
Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R STD SystemOne END GUIDING GUARDS

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2169
Guard Assembly 2 163-2170
Wear Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223
Rear
Guard Assembly 2 163-2171
Guard Assembly 2 163-2172
Wear Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223

D6T, D6R XL, XW, IG SystemOne END GUIDING GUARDS

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2177
Guard Assembly 2 163-2178
Wear Strip 4 255-7174
Bolt (12 mm) 12 8T-4184
Washer 12 8T-4223
Rear
Guard Assembly 2 163-2172
Guard Assembly 2 163-2171
Wear Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223

92
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R LGP SystemOne END GUIDING GUARDS

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2175
Guard Assembly 2 163-2176
Wear Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223
Rear
Guard Assembly 2 163-2173
Guard Assembly 2 163-2174
Wear Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223

D6T, D6R STD END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2169
Guard Assembly 2 163-2170
Wear Strip 4 160-4103
Bolt (12 mm) 16 8T-4139
Washer 16 8T-4223
Rear
Guard Assembly 2 163-2171
Guard Assembly 2 163-2172
Wear Strip 4 189-3032
Bolt (12 mm) 16 8T-4139
Washer 16 8T-4223

93
Elevated Sprocket Tractors
D6T, D6R, D6H

D6R XR END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2175
Guard Assembly 2 163-2176
Wear Strip 4 160-4103
Bolt (12 mm) 16 8T-4139
Washer 16 8T-4223
Rear
Guard Assembly 2 163-2179
Guard Assembly 2 163-2180
Wear Strip 4 160-4106
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

D6T, D6R XL END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2177
Guard Assembly 2 163-2178
Wear Strip 4 160-4104
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223
Rear
Guard Assembly 2 163-2172
Guard Assembly 2 163-2171
Wear Strip 4 189-3032
Bolt (12 mm) 16 8T-4139
Washer 16 8T-4223

94
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R LGP END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2175
Guard Assembly 2 163-2176
Wear Strip 4 160-4103
Bolt (12 mm) 16 8T-4139
Washer 16 8T-4223
Rear
Guard Assembly 2 163-2173
Guard Assembly 2 163-2174
Wear Strip 4 189-3032
Bolt (12 mm) 16 8T-4139
Washer 16 8T-4223

D6H STD SystemOne END GUIDING GUARDS 1

Metric Hardware

PART
()PER MACHINE QUANTITY NUMBER
Front
Guard Assembly 2 6I-8141
Guard Assembly 2 6I-8142
Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223
Rear
Guard Assembly 2 6I-8736
Guard Assembly 2 6I-8737
Strip 4 255-7174
Bolt (12 mm) 16 8T-4184
Washer 16 8T-4223
1 D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from the table to be
compatible with SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have a SPACER between the
guard and the wear strip, are only required to remove spacer and order the strips and hardware from this table, then machine is compatible with
SystemOne track. For D6H machines with with seal and lubricated track (SALT) and end guiding guards that have NO SPACERS between the
guard and strip have TWO options available to install SystemOne on those machines: (A) Torch off old guards and order guards and components
from this table, weld at new location makes machine compatible with SystemOne track, refer to Special Instructions SEHS9350. (B) Torch off
existing guards and rewelded at new location, order strips and hardware from the table makes machine compatible with SystemOne track, refer to
Special Instructions (SEHS9585). For general overview of SystemOne Track Guiding Arrangements refer to Special Instructions REHS2104.

95
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H XL, XW, IG SystemOne END GUIDING GUARDS 1

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 163-2177
Guard Assembly 2 163-2178
Strip 2 255-7174
Bolt 12 8T-4184
Washer 12 8T-4223
Rear
Guard Assembly 2 6I-8736
Guard Assembly 2 6I-8737
Strip 4 255-7174
Bolt 16 8T-4184
Washer 16 8T-4223
1 D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from the table to be
compatible with SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have a SPACER between the
guard and the wear strip, are only required to remove spacer and order the strips and hardware from this table, then machine is compatible with
SystemOne track. For D6H machines with with seal and lubricated track (SALT) and end guiding guards that have NO SPACERS between the
guard and strip have TWO options available to install SystemOne on those machines: (A) Torch off old guards and order guards and components
from this table, weld at new location makes machine compatible with SystemOne track, refer to Special Instructions SEHS9350. (B) Torch off
existing guards and rewelded at new location, order strips and hardware from the table makes machine compatible with SystemOne track, refer to
Special Instructions (SEHS9585). For general overview of SystemOne Track Guiding Arrangements refer to Special Instructions REHS2104.

D6H LGP SystemOne END GUIDING GUARDS 1

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 9U-8451
Guard Assembly 2 9U-8457
Strip 4 255-7174
Bolt 16 8T-4184
Washer 16 8T-4223
Rear
Guard Assembly 2 9U-8464
Guard Assembly 2 9U-8459
Strip 4 255-7174
Bolt 16 8T-4184
Washer 16 8T-4223
1 D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from the table to be
compatible with SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have a SPACER between the
guard and the wear strip, are only required to remove spacer and order the strips and hardware from this table, then machine is compatible with
SystemOne track. For D6H machines with with seal and lubricated track (SALT) and end guiding guards that have NO SPACERS between the
guard and strip have TWO options available to install SystemOne on those machines: (A) Torch off old guards and order guards and components
from this table, weld at new location makes machine compatible with SystemOne track, refer to Special Instructions SEHS9350. (B) Torch off
existing guards and rewelded at new location, order strips and hardware from the table makes machine compatible with SystemOne track, refer to
Special Instructions (SEHS9585). For general overview of SystemOne Track Guiding Arrangements refer to Special Instructions REHS2104.

96
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H STD END GUIDING GUARDS 1

SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING
HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 6I-8141
Guard Assembly 2 6I-8142
Bolt 16 8T-8919
Washer 16 8T-4223
Strip 4 9U-8456
Spacer 2 4 9U-8791
Rear
Guard Assembly 2 6I-8736
Guard Assembly 2 6I-8737
Bolt 16 8T-8919
Washer 16 5P-1076
Strip 4 9U-8456
2
Spacer 4 9U-8791
1 Refer to Special Instructions SEHS9585 and Technical Bulletin (TIB) dated August 17, 1994 for details.
2 Required for Sealed and Lubricated Track for proper clearance.

D6H XR END GUIDING GUARDS 1

SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING
HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 9U-8451
Guard Assembly 2 9U-8457
Bolt 16 8T-8919
Washer 16 5P-1076
Strip 4 9U-8456
Spacer 2 4 9U-8791
Rear
Guard Assembly 4 9U-8786
Bolt 12 8T-8919
Washer 12 5P-1076
Strip 4 9U-9206
Spacer 2 4 9U-9209
1 Refer to Special Instructions SEHS9585 and Technical Bulletin (TIB) dated August 17, 1994 for details.
2 Required for Sealed and Lubricated Track for proper clearance.

97
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H XL END GUIDING GUARDS 1

SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING
HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 129-5036
Guard Assembly 2 129-5037
Bolt 12 8T-8919
Washer 12 5P-1076
Strip 2 8E-9922
Strip 2 8E-9923
2
Spacer 4 6I-9024
Rear
Guard Assembly 2 6I-8736
Guard Assembly 2 6I-8737
Bolt 16 8T-8919
Washer 16 5P-1076
Strip 4 9U-8456
Spacer 2 4 9U-8791
1 Refer to Special Instructions SEHS9585 and Technical Bulletin (TIB) dated August 17, 1994 for details.
2 Required for Sealed and Lubricated Track for proper clearance.

D6H LGP END GUIDING GUARDS 1

SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING
HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 9U-8451
Guard Assembly 2 9U-8457
Bolt 16 5C-6565
Washer 16 8T-4223
Strip 4 9U-8456
Spacer 2 4 9U-8791
Rear
Guard Assembly 2 9U-8464
Guard Assembly 2 9U-8459
Bolt 16 5C-6565
Washer 16 8T-4223
Strip 4 9U-8456
Spacer 2 4 9U-8791
1 Refer to Special Instructions SEHS9585 and Technical Bulletin (TIB) dated August 17, 1994 for details.
2 Required for Sealed and Lubricated Track for proper clearance.

98
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 229-9556
Guard 4 229-9557
Tube 10 134-5366
Rod 10 134-5368
Nut 20 7Y-5233
Washer 20 8T-4167
Bolt (20 mm) 20 8T-4141
Spacer 20 166-2287
Plate 4 8E-9932
Bolt (12 mm) 4 8T-4956
Bolt (12 mm) 4 8T-4139
Washer 8 8T-4223

D6T, D6R XL, XW, IG SystemOne TRACK ROLLER GUARDS (FULL LENGTH)
Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 229-9558
Guard 4 229-9559
Tube 12 134-5366
Rod 12 134-5368
Nut 24 7Y-5233
Washer 24 8T-4167
Bolt (20 mm) 24 8T-4141
Spacer 24 166-2287

99
Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 229-9568
Guard 4 229-9569
Tube 14 134-5366
Rod 14 134-5368
Nut 28 7Y-5233
Washer 28 8T-4167
Bolt (20 mm) 28 8T-4141
Spacer 28 166-2287
Plate 4 8E-9932
Bolt (12 mm) 4 8T-4956
Bolt (12 mm) 4 8T-4139
Washer 8 8T-4223

D6H STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

Inch Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 229-9556
Guard 4 229-9557
Tube 10 134-5366
Rod 10 134-5368
Nut 20 7Y-5233
Washer 20 8T-4167
Bolt (3/4") 20 8C-6857
Spacer 20 166-2287
Plate 4 8E-9932
Bolt (1/2") 4 8C-4436
Bolt (1/2") 4 5C-6565
Washer 8 8T-4223

100
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H XL, XW, IG SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

Inch Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 229-9558
Guard 4 229-9559
Tube 12 134-5366
Rod 12 134-5368
Nut 24 7Y-5233
Washer 24 8T-4167
Bolt (3/4") 24 8C-6857
Spacer 24 166-2287

D6H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

Inch Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 229-9568
Guard 4 229-9569
Tube 14 134-5366
Tube 14 134-5366
Rod 14 134-5368
Rod 14 134-5368
Nut 28 7Y-5233
Nut 28 7Y-5233
Washer 28 8T-4167
Washer 28 8T-4167
Bolt (3/4") 28 8C-6857
Bolt (3/4") 28 8C-6857
Spacer 28 166-2287
Spacer 28 166-2287
Plate 4 8E-9932
Plate 4 8E-9932
Bolt (1/2") 4 8C-4436
Bolt (1/2") 4 8C-4436
Bolt (1/2") 4 5C-6565
Bolt (1/2") 4 5C-6565
Washer 8 8T-4223
Washer 8 8T-4223

101
Elevated Sprocket Tractors
D6T, D6R, D6H

D6T, D6R STD TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 172-6219
Guard (RH Front) 2 134-5365
Guard (LH Rear) 2 134-5364
Guard (LH Front) 2 134-5364
Guard (RH Rear) 2 134-5365
Tube 10 134-5366
Rod 10 134-5368
Nut 20 7Y-5233
Washer 20 8T-4167
Bolt 20 8T-4141
Spacer 20 166-2287
Plate 4 8E-9932
Bolt 4 8T-4956
Bolt 4 8T-4139
Washer 4 8T-4223

D6R XR TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 172-6220
Guard (RH Front) 2 134-9434
Gueard (LH Rear) 2 134-9435
Guard (LH Front) 2 134-9929
Guard (RH Rear) 2 134-9930
Tube 12 134-5366
Rod 12 134-5368
Nut 24 7Y-5233
Washer 24 8T-4167
Bolt 24 8T-4141
Spacer 24 166-2287
Plate 4 8E-9932
Bolt 4 8T-4956
Bolt 4 8T-4139
Washer 4 8T-4223

102
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6T XL/XW, D6R XL/XW TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 172-6228
Guard (RH Front) 2 134-9432
Guard (LH Rear) 2 134-9431
Guard (LH Front) 2 134-9431
Guard (RH Rear) 2 134-9432
Tube 12 134-5366
Rod 12 134-5368
Nut 24 7Y-5233
Washer 24 8T-4167
Bolt 24 8T-4141
Spacer 24 166-2287

D6T, D6R LGP TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 172-6229
Guard (RH Front) 2 134-6404
Guard (LH Rear) 2 134-6403
Guard (LH Front) 2 134-6403
Guard (RH Rear) 2 134-6404
Tube 14 134-5366
Rod 14 134-5368
Nut 28 7Y-5233
Washer 28 8T-4167
Bolt 28 8T-4141
Spacer 28 166-2287
Plate 4 8E-9932
Bolt 4 8T-4956
Bolt 4 8T-4139
Washer 4 8T-4223

103
Elevated Sprocket Tractors
D6T, D6R, D6H

D6H STD TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard (RH Front) 2 134-5365
Guard (LH Rear) 2 134-5364
Guard (LH Front) 2 134-5364
Guard (RH Rear) 2 134-5365
Tube 10 134-5366
Rod 10 134-5368
Nut 20 7Y-5233
Washer 20 8T-4167
Bolt 20 8C-6857
Spacer 20 166-2287
Plate 4 8E-9932
Bolt 4 8C-4436
Bolt 4 5C-6565
Washer 4 8T-4223

D6H XR TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard (RH Front) 2 134-9434
Guard (LH Rear) 2 134-9435
Guard (LH Front) 2 134-9929
Guard (RH Rear) 2 134-9930
Tube 12 134-5366
Rod 12 134-5368
Nut 24 7Y-5233
Washer 24 8T-4167
Bolt 24 8C-6857
Spacer 24 166-2287
Plate 4 8E-9932
Bolt 4 8C-4436
Bolt 4 5C-6565
Washer 4 8T-4223

104
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H XL TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard (RH Front) 2 134-9432
Guard (LH Rear) 2 134-9431
Guard (LH Front) 2 134-9431
Guard (RH Rear) 2 134-9432
Tube 12 134-5366
Rod 12 134-5368
Nut 24 7Y-5233
Washer 24 8T-4167
Bolt 24 8C-6857
Spacer 24 166-2287

D6H LGP TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard (RH Front) 2 134-6404
Guard (LH Rear) 2 134-6403
Guard (LH Front) 2 134-6403
Guard (RH Rear) 2 134-6404
Tube 14 134-5366
Rod 14 134-5368
Nut 28 7Y-5233
Washer 28 8T-4167
Bolt 28 8C-6857
Spacer 28 166-2287
Plate 4 8E-9932
Bolt 4 8C-4436
Bolt 4 5C-6565
Washer 4 8T-4223

105
Elevated Sprocket Tractors
D6T, D6R, D6H

D6R STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6I-8139
Spacer (Mounting) 20 166-2287
Bolt - Mounting (20 mm) 20 8T-4141
Tube 6 7G-4355
Rod (threaded) (16 mm) 6 110-0771
Washer 12 9X-8257
Nut (16 mm) 12 8T-4778
Plate 4 8E-9932
Bolt (12 mm) 4 8T-4956
Bolt (12 mm) 4 8T-4139
Washer 4 8T-4223

D6R XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 9U-9201
Guard Assembly 2 9U-9204
Spacer (Mounting) 24 166-2287
Bolt - Mounting (20 mm) 24 8T-4141
Tube 8 7G-4355
Rod (threaded) (16 mm) 8 110-0771
Washer 16 9X-8257
Nut (16 mm) 16 8T-4778
Plate 4 8E-9932
Bolt (12 mm) 4 8T-4956
Bolt (12 mm) 4 8T-4139
Washer 4 8T-4223

106
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6I-9029
Spacer (Mounting) 24 166-2287
Bolt - Mounting (20 mm) 24 8T-4141
Tube 8 7G-4355
Rod (threaded) (16 mm) 8 110-0771
Washer 16 9X-8257
Nut (16 mm) 16 8T-4778

D6R LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 8E-9928
Spacer (Mounting) 28 166-2287
Bolt - Mounting (20 mm) 28 8T-4141
Tube 8 7G-4355
Rod (threaded) (16 mm) 8 110-0771
Washer 16 9X-8257
Nut (16 mm) 16 8T-4778
Plate 4 8E-9932
Bolt (12 mm) 4 8T-4956
Bolt (12 mm) 4 8T-4139
Washer 4 8T-4223

107
Elevated Sprocket Tractors
D6T, D6R, D6H

D6R STD, D6H STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6I-8139
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 4 8C-4436
Bolt 20 8C-6857
Washer 8 8T-4122
Washer 4 8T-4223
Nut 8 6V-8181
Plate 4 8E-9932
Spacer 20 166-2287
Bolt 4 5C-6565

D6R XR, D6H XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 9U-9201
Guard Assembly 2 9U-9204
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 4 8C-4436
Bolt 24 8C-6857
Washer 8 8T-4122
Washer 4 8T-4223
Nut 8 6V-8181
Plate 4 8E-9932
Spacer 24 166-2287
Bolt 4 5C-6565

108
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6R XL, D6H XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6I-9029
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 24 8C-6857
Washer 8 8T-4122
Nut 8 6V-8181
Spacer 24 166-2287

D6R LGP, D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 8E-9928
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 4 8C-4436
Bolt 28 8C-6857
Washer 8 8T-4122
Washer 4 8T-4223
Nut 8 6V-8181
Plate 4 8E-9932
Spacer 28 166-2287
Bolt 4 5C-6565

109
Elevated Sprocket Tractors
D6T, D6R, D6H

D6H STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6I-9053
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 4 5C-6565
Bolt 20 8C-6857
Washer 8 8T-4122
Washer 4 8T-4223
Nut 8 6V-8181
Plate 4 8E-9932
Spacer 20 166-2287
Bolt 4 8T-4835

D6H XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 9U-9201
Guard Assembly 2 9U-9204
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 4 8C-4436
Bolt 24 8C-6857
Washer 8 8T-4122
Washer 4 8T-4223
Nut 8 6V-8181
Plate 4 8E-9932
Spacer 24 166-2287
Bolt 4 5C-6565

D6H XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6I-9036
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 24 8C-6857
Washer 8 8T-4122
Nut 8 6V-8181
Spacer 24 166-2287

110
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 3T-5128
Tube 4 7G-4355
Rod 4 3W-4144
Bolt 8 8C-4436
Bolt 28 8C-6857
Washer 8 8T-4122
Washer 12 8T-4223
Nut 8 6V-8181
Plate 4 8G-9824
Spacer 28 166-2287

D6T, D6R SystemOne CENTER GUIDING GUARDS

STD, XL, XW, IG, LGP
Metric Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 206-8837
Bolt (20 mm) 8 8T-4141
Spacer 8 166-2287

D6H SystemOne CENTER GUIDING GUARDS

STD, XL, XW, IG, LGP
Inch Hardware

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 206-8837
Bolt (3/4") 8 8C-6857
Spacer 8 166-2287

D6T, D6R STD/LGP/XL/XR/XW CENTER GUIDING GUARDS

ONE PIECE CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PART
PER MACHINE QUANTITY NUMBER
Guard Assembly 2 268-5945
Bolt (20 mm) 8 8T-4141
Spacer 8 166-2287

111
Elevated Sprocket Tractors
D6T, D6R, D6H

D6R STD/LGP/XL/XR/XW CENTER GUIDING GUARDS

CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 161-8581
Guards 2 164-0403
Guards 2 164-4611
Tube 4 134-5366
Rod 4 134-5368
Nut 8 7Y-5233
Washer 8 8T-4167
Bolt (20 mm) 8 8T-4141
Spacer 8 166-2287

D6H STD/LGP/XL/XR/XW CENTER GUIDING GUARDS

ONE PIECE CAST HEAVY DUTY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 268-5945
Bolt (3/4") 8 8C-6857
Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDS

CAST HEAVY DUTY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guards 2 164-0403
Guards 2 164-4611
Tube 4 134-5366
Rod 4 134-5368
Nut 8 7Y-5233
Washer 8 8T-4167
Bolt (3/4") 8 8C-6857
Spacer 8 166-2287

D6R STD, LGP, XL, XR, XW CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (FABRICATED, METRIC MOUNTING HARDWARE)
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 9U-8468
Bolt (20 mm) 8 8T-4141
Spacer 8 166-2287

112
 Elevated Sprocket Tractors
D6T, D6R, D6H

D6H STD/LGP/XL/XR CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (FABRICATED, INCH MOUNTING HARDWARE), NOT
FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 9U-8468
Bolt (3/4") 8 8C-6857
Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 6I-9034
Bolt 8 8C-6857
Spacer 8 3P-4133

113
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R/H STD,XR,LGP; 572R HEAVY DUTY SEALED AND LUBRICATED TRACK 1

STD: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, AEC1-UP, BRM1-UP, ACS1-UP,
BRP1-UP
XR: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, ADW1-UP, BPK1-UP, AGN1-UP,
BPT1-UP
LGP & 572R: 3DN1-UP, 4FG5622-UP, 4SR1-UP, 6ER1-UP, 80Z5524-UP, 9HM1-UPAFG1-UP, BNM1-UP, ABJ1-UP,
BNX1-UP, 2HZ1-UP, AAC1-UP
8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART Sec 40 Sec 41 Sec 43

NUMBER STD XR LGP Sec 46
Link Assembly -- (Quantity 2) 115-6301 115-6303 115-6302 123-8064 2
Track Links
RH Pin End Master 6I-9241 1 1 1 1
LH Pin End Master 6I-9242 1 1 1 1
RH Bushing End Master 6I-9243 1 1 1 1
LH Bushing End Master 6I-9244 1 1 1 1
RH Regular 6I-9239 39 40 42 45
LH Regular 6I-9240 39 40 42 45
Other Components
Pin 115-4923 40 41 43 46
Bushing 115-4924 40 41 43 46
Seal Assembly (Rigid) 239-7943 80 82 86 92
Thrust Ring 152-8073 80 82 86 92
Stopper 7G-4332 40 41 43 46
Plug 6Y-0473 40 41 43 46
3
Track Hardware
Bolt 7H-3599 156 160 168 180
Bolt (Self-Cleaning Shoe) 7H-3599 -- -- 84 90
Bolt (Self-Cleaning Shoe) 116-8145 -- -- 84 90
Nut 2S-2140 156 160 168 180
Master Bolt 9W-9058 2 2 2 2
Master Bolt 6V-1723 2 2 2 2
Master Bolt (Self-Cleaning Shoe) 9W-9058 -- -- 2 2
Master Bolt (Self-Cleaning Shoe) 6V-1725 -- -- 2 2
Special Sets/Groups
Seal Set (90 Seal Assemblies) 272-6013 1 1 1 1
Bushing and Seal Group (40 Sections) 128-5604 1 1 1 1
1 When installing Heavy Duty Track on machines prior to above serial number, refer to IRM UC95012 for installation and guarding information.
2 For use the machine equipped with 9 roller track roller frame.
3 Not part of link assembly; required to assemble track group.

114
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R STD, D7H STD MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 115-6301
Extreme Service Shoe -- 22" (560 mm) 2 115-6307
Extreme Service Shoe -- 24" (610 mm) 2 115-6308

D7R/D7H XR MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 115-6303
Moderate Service -- 26" (660 mm) 2 115-6312
Extreme Service Shoe -- 24" (610 mm) 2 115-6314

D7R/D7H LGP MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 115-6302
Moderate Service -- 36" (915 mm) 2 115-6310

115
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R/H STD,XR,LGP ROTATING BUSHING TRACK 1

STD: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, AEC1-UP, BRM1-UP, ACS1-UP,
BRP1-UP
XR: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, ADW1-UP, BPK1-UP, AGN1-UP,
BPT1-UP
LGP: 3DN1-UP, 4FG5622-UP, 4SR1-UP, 6ER1-UP, 80Z5524-UP, 9HM1-UP, AFG1-UP, BNM1-UP, ABJ1-UP,
BNX1-UP
8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART STD XR LGP

NUMBER 40 Section 41 Section 43 Section 46 Section
Link Assembly -- (Quantity 2) 152-8054 152-8057 152-8055 151-8863 2
Track Links
RH Pin End Master 6I-9241 1 1 1 1
LH Pin End Master 6I-9242 1 1 1 1
3
RH Bushing End Master 165-1760 1 1 1 1
3
LH Bushing End Master 165-1761 1 1 1 1
RH Regular 3 165-1758 39 40 42 45
LH Regular 3 165-1759 39 40 42 45
Other Components
Pin 152-8080 40 41 43 46
Bushing 165-1770 40 41 43 46
Seal Assembly (Rigid) 239-7943 160 164 172 184
Thrust Ring 152-8073 160 164 172 184
Stopper 7G-4332 40 41 43 46
Plug 6Y-0473 40 41 43 46
4
Track Hardware
Bolt 7H-3599 156 160 168 180
Nut 2S-2140 156 160 168 180
Master Bolt 6V-1723 2 2 2 2
Master Bolt 9W-9058 2 2 2 2
1 Rotating Bushing Track is an application specific undercarriage designed for high abrassion/low impact applications (4,000 hour system life or
less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-15 for installation and guarding information. Also refer to
Special Instruction SEHS9919 for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is
not for use on Track Skidders and 561H Pipelayers.
2 For use the machine equipped with 9 roller track roller frame.
3 Joint assembly (Includes link and insert). Insert not serviced.
4 Not part of link assembly; required to assemble track group.

116
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H STD,XR,LGP HYBRID TRACK

D7H STD (40 SECTION): 79Z1-5894, 5BF1-5954
D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954
D7H LGP (43 SECTION): 80Z1-5523, 4FG1-5621
8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART Sec 40 Sec 41 Sec 43

NUMBER STD XR LGP
Link Assembly -- (Quantity 2) 291-1612 1 291-1613 1 291-1615 1
Track Links
RH Pin End Master 255-4791 1 1 1
LH Pin End Master 255-4792 1 1 1
RH Bushing End Master 255-4793 1 1 1
LH Bushing End Master 255-4794 1 1 1
RH Regular 289-8083 39 40 42
LH Regular 289-8084 39 40 42
Other Components
Pin 199-2794 40 41 43
Bushing 237-3790 40 41 43
Seal Assembly (Rigid) 251-1659 80 82 86
Thrust Ring 152-8073 80 82 86
Stopper 7G-4332 40 41 43
Plug 6Y-0473 40 41 43
2
Track Hardware
Bolt 7H-3599 156 160 168
Nut 7T-9825 156 160 168
Master Bolt 9W-9058 4 4 4
Special Sets/Groups
Seal Set (86 Seal Assemblies) 251-1660 1 1 1
Bushing and Seal Group (40 Sections) 261-2353 1 1 1
1 Track shoes with 7/8 bolts are required, refer to table titled "D7H Hybrid Track Shoes" for selections.
2 Not part of link assembly; required to assemble track group.

117
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H STD,XR,LGP SEALED AND LUBRICATED TRACK

D7H STD (40 SECTION): 79Z1-5894, 5BF1-5954
D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954
D7H LGP (43 SECTION): 80Z1-5523, 4FG1-5621
8.50" (215.9 mm) PITCH -- 3/4" BOLT

PART Sec 40 Sec 41 Sec 43

NUMBER STD XR LGP
Link Assembly (Quantity 2) 6Y-1141 1 6Y-1138 2 6Y-1139 3
Track Links
RH Pin End Master 9G-2419 1 1 1
LH Pin End Master 9G-2420 1 1 1
RH Bushing End Master 9G-2421 1 1 1
LH Bushing End Master 9G-2422 1 1 1
RH Regular 9G-2417 39 40 42
LH Regular 9G-2418 39 40 42
Other Components
Pin 199-2794 40 41 43
Bushing 237-3790 40 41 43
Seal Assembly (Rigid) 251-1659 80 82 86
Thrust Ring 152-8073 80 82 86
Stopper 7G-4332 40 41 43
Plug 6Y-0473 40 41 43
4
Track Hardware
Bolt 6V-1792 156 160 168
Bolt (Self-Cleaning Shoe) 6T-2162 84
Bolt (Self-Cleaning Shoe) 6V-1792 84
Nut 1S-1860 156 160 168
Master Bolt (Long) 2P-9670 2 2 2
Master Bolt (Short) 6V-1793 2 2 2
Master Bolt (Self-Cleaning Shoe) 2P-9670 2
Master Bolt (Self-Cleaning Shoe) 6T-1441 2
Special Sets/Groups
Seal Set (86 Seal Assemblies) 251-1660 1 1 1
Bushing and Seal Group (40 Sections) 261-2353 1 1 1
1 Serviced replaced by hybrid link assembly 236-8177 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" for
selections.
2 Serviced replaced by hybrid link assembly 239-6875 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" for
selections.
3 Serviced replaced by hybrid link assembly 239-6876 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" for
selections.
4 Not part of link assembly; required to assemble track group.

118
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R, D7H TRACK SHOES

HEAVY DUTY AND ROTATING BUSHING TRACK
8.50" (215.9 mm) PITCH -- 7/8" BOLT

REGULAR TRAP HOLE

SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER STD XR LGP
Extreme Service 20.0" (510 mm) 117-0756 -- Y Y N
Extreme Service 22.0" (560 mm) 7T-2750 9Z-9261 Y Y N
Extreme Service 24.0" (610 mm) 7T-5969 9Z-9265 Y Y N
Extreme Service 26.0" (660 mm) 1Q-4960 1Q-4946 Y Y N
Extreme Service 30.0" (760 mm) -- 131-4835 N N Y
Extreme Service 36.0" (915 mm) 247-0264 127-0964 N N Y
Moderate Service 22.0" (560 mm) 7T-0737 - Y Y N
Moderate Service 24.0" (610 mm) 7T-3940 9Z-9263 Y Y N
Moderate Service 26.0" (660 mm) 7T-5968 1Z-9974 Y Y N
Moderate Service 28.0" (710 mm) 7T-2282 9Z-9267 N N Y
Moderate Service 30.0" (760 mm) 115-7462 -- N N Y
Moderate Service 36.0" (915 mm) 6I-9912 -- N N Y
Double Grouser 20.0" (510 mm) 170-3823 -- Y Y N
Double Grouser 22.0" (560 mm) -- 129-9204 Y Y N
Double Grouser 27.0" (675 mm) 170-3827 -- N N Y
Self-Cleaning 36.0" (915 mm) 115-6315 -- N N Y
Chopper 24.0" (610 mm) -- 8E-9799 Y Y N

572R TRACK SHOES

HEAVY DUTY TRACK
8.50" (215.9 mm) PITCH--7/8' BOLT

PART
Type WIDTH NUMBER
Moderate Service 26.0" (660mm) 7T-5968
Moderate Service 30.0" (760 mm) 115-7462
Moderate Service (Clip) 1 30.0" (760 mm) 8E-9399
1 Clipped grouser edges; reduces snag loading.

119
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H HYBRID TRACK SHOES

8.50" (215.9 mm) PITCH -- 7/8" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER STD XR LGP
Extreme Service 20.0" (510 mm) 1Q-4918 1Q-4919 Y Y N
Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4689 1Q-4690 Y Y N
Extreme Service 22.0" (560 mm) 1Q-4955 1Q-4956 Y Y N
Extreme Service 24.0" (610 mm) 243-5730 243-5731 Y Y N
Extreme Service 26.5" (675 mm) 1Q-4658 1Q-4659 Y Y N
Extreme Service (Trapezoidal) 26.5" (675 mm) 125-9087 125-9088 Y Y N
Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4965 1Q-4964 Y Y N
Moderate Service 22.0" (560 mm) 243-5728 243-5729 Y Y N
Moderate Service 24.0" (610 mm) 263-9763 263-9764 Y Y N
Moderate Service 26.0" (660 mm) 243-5732 243-5733 Y Y N
Moderate Service 30.0" (760 mm) 243-5734 243-5735 N N Y
Moderate Service 36.0" (915 mm) 243-5736 243-5737 N N Y
Double Grouser 20.0" (510 mm) 8E-4416 8E-4417 Y Y N
Double Grouser 24.0" (610 mm) 8E-4427 1Q-4669 Y N N
Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8323 8E-8324 Y Y N

D7H TRACK SHOES

SEALED AND LUBRICATED TRACK
8.50" (215.9 mm) PITCH -- 3/4" BOLT

REGULAR TRAP HOLE

SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER STD XR LGP
Extreme Service 20.0" (510 mm) 9G-2432 9Z-9251 Y Y N
Extreme Service 22.0" (560 mm) 9G-2436 9Z-9253 Y Y N
Extreme Service 24.0" (610 mm) 9G-2428 9Z-9255 Y Y N
Extreme Service 30.0" (760 mm) -- 1Q-4645 N N Y
Extreme Service 36.0" (915 mm) -- 1Q-4950 N N Y
Moderate Service 20.0" (510 mm) 9G-2430 -- Y Y N
Moderate Service 22.0" (560 mm) 9G-2434 1Z-9877 Y Y N
Moderate Service 24.0" (610 mm) 9G-2438 7T-9355 Y Y N
Moderate Service 26.0" (660 mm) 9G-2424 9Z-9257 Y Y N
Moderate Service 30.0" (760 mm) 8E-4976 -- N N Y
Moderate Service 36.0" (915 mm) 3T-6210 1Q-0418 N N Y
Double Grouser 22.0" (560 mm) 8E-4425 -- Y N N
Self-Cleaning 36.0" (915 mm) 3T-6212 -- N N Y
Quad (ES) 1 30.0" (760 mm) -- 131-5311 N N Y
Chopper 20.0" (510 mm) -- 8E-8327 Y Y N
1 For information on Quad-Link Track, refer to IRM UC91-18.

120
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R, D7H, 572R SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 278-2363
Bolt 25 5P-7665
Nut 25 7H-3608
Washer 25 6V-5841

D7R STD/LGP, D7H STD/LGP, 572R IDLERS

SYMMETRIC SEAL, 12 BOLT RETAINER

FABRICATED CAST SINGLE

DESIGN PART WEB DESIGN
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Group (Large Tread Diameter 628 mm) 4 -1 192-0216
Components of Group
Idler Assembly 1 192-0219 192-0215
Bearing 2 2 6Y-1757 6Y-1757
Shaft 1 131-3935 131-3935
Collar 2 107-3945 107-3945
Retainer 2 192-0213 192-0213
3
Thrust Washer 1 8E-6619 8E-6619
Bolt 24 5P-9681 5P-9681
Washer 24 3K-6113 3K-6113
Seal -- Duo-Cone Group (Symmetric) 2 162-7862 162-7862
Toric Ring 2 2 162-2166 162-2166
Seal -- Retainer 2 2H-9247 2H-9247
Seal -- Collar 2 7J-2036 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
4
Mounting Hardware
End Cap (Abutment Style) 2 131-1647 131-1647
Block 2 8E-8648 8E-8648
Bolt (7/8") (D7R) 4 9S-1322 9S-1322
Bolt (7/8") (D7H) 4 1D-4634 1D-4634
Washer 4 5P-8249 5P-8249
Shim D7R (Front Idlers Only) 2 131-8207 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889 107-4889
2
Toric Ring 2 9M-9730 9M-9730
1 Order 192-0216 Idler Group.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
4 These components are not part of Idler Group; quantities required to mount each idler.

121
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R STD/LGP, D7H STD/LGP, 572R IDLERS

SYMMETRIC SEAL, 8 BOLT RETAINER

FABRICATED CAST SINGLE

DESIGN PART WEB DESIGN
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Group (Large Tread Diameter 628 mm) 4 -- 1 -- 2
Components of Group
Idler Assembly 1 -- 3 -- 4
Bearing 5 2 6Y-1757 6Y-1757
Shaft 1 131-3935 131-3935
Collar 2 107-3945 107-3945
Retainer 2 131-3932 131-3932
Thrust Washer 6 1 8E-6619 8E-6619
Bolt 16 0T-0320 0T-0320
Washer 16 3K-6113 3K-6113
Seal -- Duo-Cone Group (Symmetric) 2 162-7862 162-7862
Toric Ring 5 2 162-2166 162-2166
Seal -- Retainer 2 2H-9247 2H-9247
Seal -- Collar 2 7J-2036 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
7
Mounting Hardware
End Cap (Abutment Style) 2 131-1647 131-1647
Block 2 8E-8648 8E-8648
Bolt (7/8") (D7R) 4 9S-1322 9S-1322
Bolt (7/8") (D7H) 4 1D-4634 1D-4634
Washer 4 5P-8249 5P-8249
Shim D7R (Front Idlers Only) 2 131-8207 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889 107-4889
5
Toric Ring 2 9M-9730 9M-9730
1 Idler Group 161-5792 replaced by 192-0220. Idler Group 192-0220 not serviced, order 192-0216 Idler Group.
2 Idler Group 159-2086 replaced by 192-0216.
3 Idler Assembly 6Y-2033 replaced by (1) 192-0219 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.
4 Idler Assembly 159-2084 replaced by (1) 192-0215 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.
5 Component of preceding assembly or group; quantity shown is per assembly or group.
6 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
7 These components are not part of Idler Group; quantities required to mount each idler.

122
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R D7H, XR IDLERS

SYMMETRIC SEAL, 12 BOLT RETAINER

FABRICATED
DESIGN PART
(PER MACHINE) QUANTITY NUMBER
Group (Small Tread Diameter 585 mm) 4 192-0224
Components of Group
Idler Assembly 1 192-0223
1
Bearing 2 6Y-1757
Shaft 1 131-3935
Collar 2 107-3945
Retainer 2 192-0213
Thrust Washer 2 1 8E-6619
Bolt 24 5P-9681
Washer 24 3K-6113
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
Toric Ring 1 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 131-1647
Block 2 165-6942
Bolt (7/8") 4 1D-5976
Washer 4 5P-8249
Shim (D7R Front Idlers Only) 2 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
3 These components are not part of Idler Group; quantities required to mount each idler.

123
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R D7H, XR IDLERS

SYMMETRIC SEAL, 8 BOLT RETAINER

FABRICATED
DESIGN PART
(PER MACHINE) QUANTITY NUMBER
Group (Small Tread Diameter 585 mm) 4 -- 1
Components of Group
Idler Assembly 1 -- 2
Bearing 3 2 6Y-1757
Shaft 1 131-3935
Collar 2 107-3945
Retainer 2 131-3932
Thrust Washer 4 1 8E-6619
Bolt 16 0T-0320
Washer 16 3K-6113
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
Toric Ring 3 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
5
Mounting Hardware
End Cap (Abutment Style) 2 131-1647
Block 2 165-6942
Bolt (7/8") 4 1D-5976
Washer 4 5P-8249
Shim (D7R Front Idlers Only) 2 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
3
Toric Ring 2 9M-9730
1 Idler Group 135-9896 replaced by 192-0224.
2 Idler Assembly 6Y-2030 replaced by (1) 192-0223 Idler Assembly, (2) 192-0213 Retainer, and (24) 5P-9681 Bolts.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
5 These components are not part of Idler Group; quantities required to mount each idler.

124
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R STD/LGP, D7H STD/LGP, LANDFILL/SPECIAL APPLICATION IDLERS

SYMMETRIC SEAL, 12 BOLT RETAINER

CAST SINGLE
WEB DESIGN
(PER MACHINE) QUANTITY PART NUMBER
Group 4 197-7754
Components of Group
Idler Assembly 1 192-0215
1
Bearing 2 6Y-1757
Shaft 1 131-3935
Collar 2 166-3317
Retainer 2 197-7752
Thrust Washer 2 1 8E-6619
Bolt 24 6K-3772
Washer 24 3K-6113
Plate 2 197-7753
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
1
Toric Ring 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 131-1647
Block 2 8E-8648
Bolt (7/8") (D7R) 4 9S-1322
Bolt (7/8") (D7H) 4 1D-4634
Washer 4 5P-8249
Shim D7R (Front Idlers Only) 2 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
Toric Ring 1 2 9M-9730
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
3 These components are not part of Idler Group; quantities required to mount each idler.

125
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R STD, D7R LGP, D7H STD, D7H LGP LANDFILL/SPECIAL APPLICATION IDLERS
SYMMETRIC SEAL, 8 BOLT RETAINER

CAST SINGLE
WEB DESIGN
(PER MACHINE) QUANTITY PART NUMBER
Group 4 -- 1
Components of Group
Idler Assembly 1 -- 2
Bearing 3 2 6Y-1757
Shaft 1 131-3935
Collar 2 166-3317
Retainer 2 166-3316
Thrust Washer 4 1 8E-6619
Bolt 16 8C-6877
Washer 16 8T-5360
Plate 2 166-3315
Seal 2 166-3318
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
Toric Ring 3 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
Mounting Hardware 5
End Cap (Abutment Style) 2 131-1647
Block 2 8E-8648
Bolt (7/8") (D7R) 4 9S-1322
Bolt (7/8") (D7H) 4 1D-4634
Washer 4 5P-8249
Shim D7R (Front Idlers Only) 2 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
3
Toric Ring 2 9M-9730
1 Idler Group 166-4429 replaced by 197-7754.
2 Idler Assembly 159-2084 replaced by (1) 192-0215 Idler Assembly, (2) 197-7752 Retainer, (2) 197-7753 Plates, (24) 6K-3772 Bolts, (24)
3K-6113 Washer.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
5 These components are not part of Idler Group; quantities required to mount each idler.

126
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERS

SYMMETRIC SEAL, 12 BOLT RETAINER

FABRICATED
DESIGN PART
(PER MACHINE) QUANTITY NUMBER
Group 4 198-6726
Components of Group
Idler Assembly 1 192-0223
1
Bearing 2 6Y-1757
Shaft 1 131-3935
Collar 2 166-3317
Retainer 2 197-7752
Thrust Washer 2 1 8E-6619
Bolt 24 6K-3772
Washer 24 3K-6113
Plate 2 197-7753
Seal 4 166-3318
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
1
Toric Ring 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
Mounting Hardware 3
End Cap (Abutment Style) 2 131-1647
Block 2 165-6942
Bolt (7/8") 4 1D-5976
Washer 4 5P-8249
Shim (D7R Front Idlers Only) 2 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
Toric Ring 1 2 9M-9730
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
3 These components are not part of Idler Group; quantities required to mount each idler.

127
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERS

SYMMETRIC SEAL DESIGN, 8 BOLT RETAINER

FABRICATED
DESIGN PART
(PER MACHINE) QUANTITY NUMBER
Group 4 -- 1
Components of Group
Idler Assembly 1 -- 2
Bearing 3 2 6Y-1757
Shaft 1 131-3935
Collar 2 166-3317
Retainer 2 166-3316
Thrust Washer 4 1 8E-6619
Bolt 24 8C-6877
Washer 24 8T-5360
Plate 2 166-3315
Seal 4 166-3318
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
Toric Ring 3 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
Mounting Hardware 5
End Cap (Abutment Style) 2 131-1647
Block 2 165-6942
Bolt (7/8") 4 1D-5976
Washer 4 5P-8249
Shim (D7R Front Idlers Only) 2 131-8207
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
Toric Ring 3 2 9M-9730
1 Idler Group 170-1104 replaced by 198-6726
2 Idler Assembly 6y-2030 replaced by (1) 192-0223 Idler Assembly, (2) 197-7752 Retainer, (2) 197-7753 Plate, (24) 6K3772 Bolts, (24) 3K6113
Washers.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
5 These components are not part of Idler Group; quantities required to mount each idler.

128
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R, D7H CENTER TREAD IDLER 1

12 BOLT RETAINER
USE WITH ROTATING BUSHING TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 249-2939 2
Components of Group
Idler Assembly 1 249-2940 3
Bearing 4 2 6Y-1757
Shaft 1 131-3935
Retainer 2 192-0213 5
Thrust Washer 2 8E-6619
Collar 2 107-3945
Bolt 24 5P-9681
Washer 24 3K-6113
Seal -- Duo-Cone Group (Symmetric) 2 162-7862
Toric Ring 4 2 162-2166
Seal -- Retainer 2 2H-9247
Seal -- Collar 2 7J-2036
Stopper 1 9G-5664
Plug 1 6Y-0473
6
Mounting Hardware D7H STD, LGP
End Cap (Abutment Style)(RH) 1 173-7653
End Cap (Abutment Style)(LH) 1 173-7652
Block (RH) 1 173-7656
Block (LH) 1 173-7657
Shim 2 173-7660
Bolt (7/8") 4 9S-1322
Washer (7/8") 4 5P-8249
6
Mounting Hardware D7R STD, LGP
End Cap (Abutment Style)(RH) 1 173-7653
End Cap (Abutment Style)(LH) 1 173-7652
Block (RH) 1 173-7658
Block (LH) 1 173-7659
Shim (Rear) 2 192-0811
Shim (Front) 2 173-7660
Bolt (7/8") 4 6J-1536
Washer (7/8") 4 5P-8249
1 Complete kits available for machine retrofit: D7H STD (164-3335), D7H LGP (164-3336), D7R STD (169-4234), D7R LGP (169-4236).
2 Idler Group 166-8357 replaced by 249-2939.
3 Idler Assembly 166-8358 replaced by (1) 249-2940 Idler Assembly, (2) 192-0213 Retainer, (24) 5P9681 Bolt, (24) 3K6113 Washer.
4 Component of preceding assembly or group; quantity shown is per assembly or group.
5 If 8 bolt retainer is required order 131-3932.
6 These components are not part of Idler Group; quantities required to mount each idler.

129
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R D7H, LGP IDLERS

9 ROLLER FRAME

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group (Tread Diameter 605 mm) 4 -- --
Components of Group
Idler Assembly 1 -- 1 -- 1
Bearing 2 2 6Y-1757 6Y-1757
Shaft 1 6Y-1756 131-3935
Retainer Assembly 2 -- --
Retainer 2 108-0041 131-3932
Thrust Washer 2 8E-6619 8E-6619
Collar 2 -- 107-3945
Bolt 16 4F-8965 0T-0320
Washer 16 -- 3K-6113
Stabilizer Ring 2 6T-4871 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7862
Toric Ring 2 2 -- 162-2166
Seal -- Duo-Cone Group (Inverted) 2 7T-0158 --
Toric Ring 2 1 6P-8912 --
2
O-Ring 1 6V-2701 --
Seal -- Retainer 2 2H-9247 2H-9247
Seal -- Collar 2 -- 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
Mounting Hardware 3
End Cap 2 131-1647 131-1647
Block (Front Idler) 2 8E-8648 8E-8648
Block (Rear Idler) 2 6Z-8243 6Z-8243
Bolt (Front) 4 1D-4634 1D-4634
Bolt (Rear) 4 9S-1322 9S-1322
Washer 4 5P-8249 5P-8249
1 Idler Assembly 3Q-3873 Replaced by (1) 195-9816 Idler Assembly, (2) 192-0213 Retainers, (24) 5P-9681 Bolt, (24) 3K-6113 Washer
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 These components are not part of Idler Group; quantities required to mount each idler.

130
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H STD/LGP IDLERS

FORMER DESIGN, LARGE TREAD DIAMETER, LARGE BEARING

FABRICATED CAST SINGLE

DESIGN PART WEB DESIGN
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Group (Tread Diameter 628 mm) 4 -- --
Components of Group
Idler Assembly 1 -- 1 -- 2
Bearing 3 2 6Y-1757 6Y-1757
Shaft 1 6Y-1756 6Y-1756
Retainer 2 108-0041 108-0041
Thrust Washer 4 1 8E-6619 8E-6619
Bolt 16 0T-0320 0T-0320
Washer 16 3K-6113 3K-6113
Stabilizer Ring 2 6T-4871 6T-4871
Seal -- Duo-Cone Group (Inverted) 2 7T-0158 7T-0158
3
Toric Ring 1 6P-8912 6P-8912
3
O-Ring 1 6V-2701 6V-2701
Seal -- Retainer 2 2H-9247 2H-9247
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
5
Mounting Hardware
End Cap (Abutment Style) 2 131-1647 131-1647
Block 2 8E-8648 8E-8648
Bolt (7/8") (D7R) 4 9S-1322 9S-1322
Bolt (7/8") (D7H) 4 1D-4634 1D-4634
Washer 4 5P-8249 5P-8249
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-5133 7T-5133
3
Toric Ring 1 7T-1094 7T-1094
3
O-Ring 1 6V-2701 6V-2701
1 Idler Assembly 6Y-2033 Replaced by (1) 192-0219 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.
2 Idler Assembly 159-2084 Replaced by (1) 192-0215 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
5 These components are not part of Idler Group; quantities required to mount each idler.

131
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H XR IDLERS
FORMER DESIGN, SMALL TREAD DIAMETER, LARGE BEARING

FABRICATED
DESIGN PART
(PER MACHINE) QUANTITY NUMBER
Group (Tread Diameter 585 mm) 4 --
Components of Group
Idler Assembly 1 -- 1
Bearing 2 2 6Y-1757
Shaft 1 6Y-1756
Retainer 2 108-0041
Thrust Washer 3 1 8E-6619
Bolt 16 0T-0320
Washer 16 3K-6113
Stabilizer Ring 2 6T-4871
Seal -- Duo-Cone Group (Inverted) 2 7T-0158
2
Toric Ring 1 6P-8912
2
O-Ring 1 6V-2701
Seal -- Retainer 2 2H-9247
Stopper 1 9G-5664
Plug 1 6Y-0473
4
Mounting Hardware
End Cap (Abutment Style) 2 131-1647
Block 2 165-6942
Bolt (7/8") 4 1D-5976
Washer 4 5P-8249
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-5133
Toric Ring 2 1 7T-1094
2
O-Ring 1 6V-2701
1 Idler Assembly 6Y-2030 Replaced by (1) 192-0223 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
4 These components are not part of Idler Group; quantities required to mount each idler.

132
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H STD/LGP/XR IDLERS

EARLY DESIGN, SMALL BEARING

FABRICATED
DESIGN PART
(PER MACHINE) QUANTITY NUMBER
Group 4 --
Components of Group
Idler Assembly 1 --
1
Bearing 2 --
Shaft 1 6T-1355
Retainer 2 9G-9344
Thrust Washer 2 1 8E-7510
Bolt 24 1T-0720
Washer 24 5M-2894
Stabilizer Ring 2 6T-4871
Seal -- Duo-Cone Group (Inverted) 2 7T-0158
1
Toric Ring 1 6P-8912
1
O-Ring 1 6V-2701
Seal -- Retainer 2 5F-3106
Stopper 1 9G-5664
Plug 1 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 131-1647
Block 2 8E-8648
Bolt (7/8") 4 1D-4634
Washer 4 5P-8249
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-5133
Toric Ring 1 1 7T-1094
1
O-Ring 1 6V-2701
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. See
Special Instruction SEHS8515.
3 These components are not part of Idler Group; quantities required to mount each idler.

133
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R, D7H, 572R CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 1P-8717
Components of Group
Roller Shell 1 1P-8716
Shaft 1 1P-8715
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Groups
Group (Steel Mill) 4 2P-3514
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
Group (Arctic) 4 255-8882
Seal -- Duo-Cone Group (Arctic) 1 171-5882
1
Toric Ring 2 162-2166
1 Component of preceding group; quantity shown is the quantity per group.

134
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R D7H STD/LGP/XR, 572R TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 231-3091
Single Flange (SF) 8 231-3090
2
Double Flange (DF) - Tall Flange -- 231-3092
Components of Group
Roller Shell (DF) 1 124-8255
Roller Shell (SF) 1 124-8251
Roller Shell (Tall Flange, DF) 1 124-8259
Bushing Assembly 2 124-8267
Shaft 1 118-1628
Ring (Retaining-Snap) 2 121-1258
Ring (Lock) 2 6H-2953
End Collar 2 124-8262
Seal -- Duo-Cone Group 2 171-5882
Toric Ring 3 2 162-2166
Bushing O-Ring 2 4H-9105
Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
Bolt (7/8") 4 1D-4629
Washer 4 9H-1031
Special Application Roller Groups
Double Flange (DF) (Arctic) 61 248-5317
Single Flange (SF) (Arctic) 8 248-5319
Seal -- Duo-Cone Group (Arctic) 2 171-5882
3
Toric Ring 2 162-2166
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 3 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
Stopper (Steel Mill) 2 3T-3800
Plug (Steel Mill) 2 3T-3799
1 8 DF Roller Groups required on XR machines.
2 Optional DF roller for guiding: use quantity required for specific roller frame type.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 These components are not included in the roller group. Quantities shown are required to mount each roller.

135
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H STD/LGP/XR TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 --
Single Flange (SF) 8 --
Components of Group
Roller Shell (DF) 1 9W-5581
Roller Shell (SF) 1 9W-5582
Bearing 2 2 9W-9498
Shaft 1 3T-7392
Retainer 2 9W-6632
Thrust Washer 3 2 8E-7510
Bolt (Retainer) 12 0S-1595
Washer (Retainer) 12 5P-8245
Stabilizer Ring 2 6T-4871
Seal -- Duo-Cone Group 2 7T-0158
Toric Ring 2 1 6P-8912
O-Ring 2 1 6V-2701
Seal -- Retainer O-Ring 2 5F-3106
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
End Cap 2 6T-5114
Bolt (7/8") 4 2H-3856
Washer 4 4M-6953
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-5133
Toric Ring 2 1 7T-1094
2
O-Ring 1 6V-2701
Retainer O-Ring 2 4S-5898
Stopper 2 3T-3800
Plug 2 3T-3799
1 8 DR Roller Groups required on XR machines.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)
2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 Thrust Washer. See Special Instruction
SEHS8515.
4 These components are not included in the roller group. Quantities shown are required to mount each roller.

136
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R, D7H END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK (STD, XR, LGP)

PART
(PER MACHINE) QUANTITY NUMBER
Front (Guard Assembly)
Right Outer, Left Inner 2 165-7574
Left Outer, Right Inner 2 165-7576
Wear Strip 4 165-7211
Bolt 12 7X-0343
Washer 12 8T-4122
Rear (Guard Assembly)
Right Outer, Left Inner 2 165-7574
Left Outer, Right Inner 2 165-7576
Wear Strip 4 203-8040
Bolt 12 7X-0343
Washer 12 8T-4122

D7H END GUIDING GUARDS

SEALED AND LUBRICATED TRACK (STD, XR, LGP)

PART
(PER MACHINE) QUANTITY NUMBER
Front (Guard Assembly)
Right Outer, Left Inner 2 3T-7192
Left Outer, Right Inner 2 3T-7195
Wear Strip 2 3T-7710
Wear Strip 2 3T-7711
Bolt 12 7X-0343
Washer 12 8T-4122
Rear (Guard Assembly)
Right Outer, Left Inner 2 3T-7192
Left Outer, Right Inner 2 3T-7195
Wear Strip 2 3T-7710
Wear Strip 2 3T-7711
Bolt 12 7X-0343
Washer 12 8T-4122

137
Elevated Sprocket Tractors
D7R, D7H, 572R

D7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH - CAST HEAVY DUTY)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 175-3829
Guard (RH Front) 2 169-0164
Guard (RH Rear) 2 169-0163
Guard (LH Front) 2 169-0163
Guard (LH Rear) 2 169-0164
Tube 12 165-3663
Rod 12 165-3664
Nut 24 7D-8508
Washer 24 8C-6913
Bolt 24 7X-0383
Spacer 24 178-7195
Bolt 8 5C-6565
Washer 8 7X-0590

D7R/D7H XR TRACK ROLLER GUARDS (FULL LENGTH - CAST HEAVY DUTY)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 175-3830
Guard (RH Front) 2 166-3451
Guard (RH Rear) 2 166-3449
Guard (LH Front) 2 166-3449
Guard (LH Rear) 2 166-3451
Tube 14 165-3663
Rod 14 165-3664
Nut 28 7D-8508
Washer 28 8C-6913
Bolt 28 7X-0383
Spacer 28 178-7195
Bolt 8 5C-6565
Washer 8 7X-0590

138
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7R/H LGP, 572R TRACK ROLLER GUARDS (FULL LENGTH - CAST HD)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 175-3831
Guard (RH Front) 2 169-0162
Guard (RH Rear) 2 169-0161
Guard (LH Front) 2 169-0161
Guard (LH Rear 2 169-0162
Tube 12 165-3663
Rod 12 165-3664
Nut 24 7D-8508
Washer 24 8C-6913
Bolt 24 7X-0383
Spacer 24 178-7195
Bolt 8 5C-6565
Washer 8 7X-0590

D7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 111-0437
Tube 12 111-0428
Rod 12 111-0429
Bolt 8 5C-6565
Bolt 24 7X-0383
Washer 8 7X-0590
Washer 24 8C-6913
Spacer 24 178-7195
Nut 24 7D-8508

139
Elevated Sprocket Tractors
D7R, D7H, 572R

D7R/D7H XR TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 111-0443
Tube 12 111-0428
Rod 12 111-0429
Bolt 8 5C-6565
Bolt 28 7X-0383
Washer 8 7X-0590
Washer 24 8C-6913
Spacer 28 178-7195
Nut 24 7D-8508

D7R/D7H LGP TRACK ROLLER GUARDS (FULL LENGTH)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 111-0446
Tube 12 111-0428
Rod 12 111-0429
Bolt 8 5C-6565
Bolt 24 7X-0383
Washer 8 7X-0590
Washer 24 8C-6913
Spacer 24 178-7195
Nut 24 7D-8508

D7H STD TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 9W-3550
Tube 12 2F-0025
Rod 12 8H-1383
Bolt 8 5C-6565
Bolt 24 7X-0383
Washer 8 7X-0590
Washer 24 8C-6913
Spacer 24 178-7195
Nut 12 7D-8508

140
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H XR TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 9W-0929
Tube 14 2F-0025
Rod 14 8H-1383
Bolt 8 5C-6565
Bolt 28 7X-0383
Washer 8 7X-0590
Washer 28 8C-6913
Spacer 28 178-7195
Nut 14 7D-8508

D7H LGP TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 9W-4025
Tube 12 2F-0025
Rod 12 8H-1383
Bolt 8 5C-6565
Bolt 24 7X-0383
Washer 8 7X-0590
Washer 24 8C-6913
Spacer 24 178-7195
Nut 12 7D-8508

D7R STD/LGP, D7H STD/LGP 572R CENTER GUIDING GUARDS

CAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 161-8582
Guard Assembly 4 163-8686
Tube 4 165-3663
Rod 4 165-3664
Bolt 8 7X-0383
Washer 8 8C-6913
Nut 8 7D-8508
Spacer 8 178-7195

141
Elevated Sprocket Tractors
D7R, D7H, 572R

D7R/D7H XR CENTER GUIDING GUARDS

CAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Track Guide Kit 1 175-3828
Guard Assembly 4 163-8688
Tube 6 165-3663
Rod 6 165-3664
Bolt 12 7X-0383
Washer 12 8C-6913
Nut 12 7D-8508
Spacer 12 178-7195

D7R STD/LGP, D7H STD/LGP CENTER GUIDING GUARDS

FABRICATED, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 111-0423
Tube 4 111-0428
Rod 4 111-0429
Bolt 8 7X-0383
Washer 8 8C-6913
Nut 8 7D-8508
Spacer 8 178-7195

D7R/D7H XR CENTER GUIDING GUARDS

FABRICATED, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY
NOT FOR NACD USE

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 111-0431
Tube 6 111-0428
Rod 6 111-0429
Bolt 12 7X-0383
Washer 12 8C-6913
Nut 12 7D-8508
Spacer 12 178-7195

142
 Elevated Sprocket Tractors
D7R, D7H, 572R

D7H STD/LGP CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 9W-3560
Tube 4 2F-0025
Rod Assembly 4 -- 1
Bolt 8 7X-0383
Washer 8 8C-6913
Nut 4 7D-8508
Spacer 8 178-7195
1 Rod Assembly 8H1384 serviced by (1) 8H1383 Rod and (1) 1B4208 Nut.

D7H XR CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 9W-0922
Tube 6 2F-0025
Rod Assembly 6 -- 1
Bolt 12 7X-0383
Washer 12 8C-6913
Nut 6 7D-8508
Spacer 12 178-7195
1 Rod Assembly 8H1384 serviced by (1) 8H1383 Rod and (1) 1B4208 Nut.

143
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N TRACK

NON-POSITIVE PIN RETENTION (NON-PPR) TRACK
7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B
8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 44 Section 2 272-6010
Track Links
RH Pin End Master 1 8E-4059
LH Pin End Master 1 8E-4060
RH Bushing End Master 1 8E-4457
LH Bushing End Master 1 8E-4458
RH Regular 43 8E-4505
LH Regular 43 8E-4506
Other Components
Pin 43 199-2794
Master Pin 1 9W-5588
Bushing 44 6Y-3914
Retaining Ring 2 3T-9118
Seal Assembly (Rigid) 88 239-7943
Thrust Ring 88 152-8073
Stopper 44 7G-4332
Plug 44 6Y-0473
1
Track Hardware
Bolt 172 6V-1723
Nut 172 7G-6442
Master Bolt (Long) 2 6V-1725
Master Bolt (Short) 2 6V-1724
Special Set/Group
Seal Set (90 Seal Assemblies) 1 272-6013
Bushing & Seal Group (45 Sections) 1 5Y-2373
1 Not part of link assembly: required to assemble track group.

144
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
Non PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 272-6010
Super Extreme Service Shoe --24" (610 mm) 2 218-7347
Extreme Service Shoe -- 22" (560 mm) 2 8E-7700
Extreme Service Shoe -- 24" (610 mm) 2 6Y-4124
Extreme Service Shoe -- 24" (610 mm) (Trap) 2 1Q-4685
Extreme Service Shoe -- 26" (660 mm) 2 1Q-4677
Extreme Service Shoe -- 26" (660 mm) (Trap) 2 1Q-4675
Moderate Service Shoe -- 28" (710 mm) 2 8E-7699

145
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N TRACK

POSITIVE PIN RETENTION (PPR) TRACK
7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B
8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 44 Section 2 272-6009
Track Links
RH Pin End Master 1 8E-4061
LH Pin End Master 1 8E-4062
RH Bushing End Master 1 8E-4457
LH Bushing End Master 1 8E-4458
RH Regular 43 8E-4513
LH Regular 43 8E-4514
Other Components
Pin 44 7T-7054
Bushing 44 6Y-3914
Retainer Ring (PPR) 88 6Y-0469
Seal Assembly (Rigid) 88 239-7943
Thrust Ring 88 152-8073
Stopper 44 7G-4332
Plug 44 6Y-0473
1
Track Hardware
Bolt 172 6V-1723
Nut 172 7G-6442
Master Bolt (Long) 2 6V-1725
Master Bolt (Short) 2 6V-1724
Special Set/Group
Seal Set (90 Seal Assemblies) 1 272-6013
Bushing and Seal Group (45 Sections) 1 5Y-2373
Retainer Ring Group (98 Retaining Rings) 1 6Y-1081
2
Facing Group 1 9W-9675
1 Not part of link assembly; required to assemble track group.
2 Contains 400 facing rings to service 2 tracks.

D8T, D8R, D8N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 272-6009
Super Extreme Service Shoe --24" (610 mm) 2 205-5796
Extreme Service Shoe -- 22" (560 mm) 2 1Q-4739
Extreme Service Shoe -- 24" (610 mm) 2 203-2198
Extreme Service Shoe -- 24" (610 mm) (Trap) 2 159-8862
Extreme Service Shoe -- 26" (660 mm) 2 217-5257

146
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

587T, 587R, 583T, 583R, 578 PIPELAYER TRACK

POSITIVE PIN RETENTION (PPR) TRACK
587T/R, 583T/R (47 SECTION): FAT, BXL, CMX, 2XS
578 (49 SECTION): 8HB
8.50" (215.9 mm) PITCH -- 7/8" BOLT

587T/R,
PART 583T/R 578
NUMBER 47 Section 49 Section
Link Assembly -- 47 Section 136-6713 6I-8839
Track Links
RH Pin End Master 8E-4061 1 1
LH Pin End Master 8E-4062 1 1
RH Bushing End Master 8E-4457 1 1
LH Bushing End Master 8E-4458 1 1
RH Regular 8E-4513 46 48
LH Regular 8E-4514 46 48
Other Components
Pin 7T-7054 47 49
Bushing 6Y-3914 47 49
Seal Assembly (Rigid) 239-7943 94 98
Thrust Ring 152-8073 94 98
Retaining Ring (PPR) 6Y-0469 94 98
Stopper 7G-4332 47 49
Plug 6Y-0473 47 49
1
Track Hardware
Bolt 6V-1723 184 192
Nut 7G-6442 184 192
Master Bolt (Long) 6V-1725 2 2
Master Bolt (Short) 6V-1724 2 2
Special Set/Group
Seal Set (90 Seal Assemblies) 272-6013 1 1
Bushing and Seal Group (45 Sections) 5Y-2373 1 1
Retaining Ring Group (98 Retaining Rings) 6Y-1081 1 1
Facing Group 2 9W-9675 1 1
1 Not part of link assembly; required to assemble track group.
2 Contains 400 facing rings to service 2 tracks.

147
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N TRACK SHOES

8.50" (215.9 mm) PITCH -- 7/8" BOLT

FORMER
PART PART
TYPE WIDTH NUMBER NUMBER 1
Super Extreme Service 2 24.0" (610 mm) -- 115-1385
Extreme Service 22.0" (560 mm) 7T-2750 7T-2390
Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 9Z-9261 1Z-9417
Extreme Service 24.0" (610 mm) 7T-5969 7T-2392
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 9Z-9265 1Z-9422
Extreme Service 26.0" (660 mm) 1Q-4960 7T-2394
Extreme Service (Trapezoidal Opening) 26.0" (660 mm) 1Q-4946 9W-5541
Extreme Service 27.6" (700 mm) -- 200-4074
Moderate Service 22.0" (560 mm) 7T-0737 7G-6448
Moderate Service (Trapezoidal Opening) 22.0" (560 mm) -- 1Z-9983
Moderate Service 24.0" (610 mm) 7T-3940 9P-2661
Moderate Service (Trapezoidal Opening) 24.0" (610 mm) 9Z-9263 1Z-9960
Moderate Service 26.0" (660 mm) 7T-5968 9P-2665
Moderate Service (Trapezoidal Opening) 26.0" (660 mm) 1Z-9974 6T-7405
Moderate Service 28.0" (710 mm) 7T-2282 7G-6454
Moderate Service (Trapezoidal Opening) 28.0" (710 mm) 9Z-9267 1Z-9425
Chopper (Trapezoidal Opening) 24.0" (610 mm) -- 8E-9799
1 Track shoes provide approximately 40% more wear material than the former shoe part numbers.
2 Modified D9L ES Track Shoe.

583T, 583R, 578 TRACK SHOES

8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART
TYPE WIDTH NUMBER
Moderate Service (Clipped Grouser) 1 28.0" (710 mm) 8E-9396
Moderate Service (Clipped Grouser) 1 30.0" (760 mm) 8E-9399
1 Clipped grouser edges; reduces snag loading.

587T, 587R TRACK SHOES

8.50" (215.9 mm) PITCH - 7/8" BOLT

PART
TYPE WIDTH NUMBER
Super Extreme Service 34.0" (865 mm) 253-1519
Super Extreme Service (Clipped Grouser) 34.0" (865 mm) 306-9460

148
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 278-2363
Bolt 25 5P-7665
Nut 25 7H-3608
Washer 25 6V-5841

149
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N IDLERS

7XM3582-UP, 6YZ0001-UP

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group -- Front (Large Diameter) 2 -- 111-1730
1
Group -- Rear (Small Diameter) 2 -- 111-1729
Components of Group
Idler Assembly (Front) 1 6Y-0556 6Y-0556
Idler Assembly (Rear) 1 6Y-0553 6Y-0553
Bearing 2 2 154-3298 154-3298
Shaft 1 138-9712 154-3307
Collar 2 -- 107-3947
Retainer 2 9P-0201 107-3946
3
Thrust Washer 2 8E-6619 8E-6619
Bolt 24 5P-2546 5P-2546
Washer 24 3K-6113 3K-6113
Stabilizer Ring 2 6T-5247 --
Seal -- Duo-Cone Group (Inverted) 2 7T-0159 --
2
Toric Ring 1 8P-0021 --
2
O-Ring 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7863
Toric Ring 2 2 -- 162-2167
Seal -- Retainer 2 8F-9516 8F-9516
Seal -- Collar 2 -- 107-4057
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
4
Mounting Hardware
End Cap (Abutment Style) 2 306-9441 306-9441
Bolt 4 9W-4480 9W-4480
Washer 4 3S-1349 3S-1349
Insert 2 9W-4481 9W-4481
Special Application Arctic Idler Groups
Idler Group -- Front (Large Diameter) (Arctic) 2 -- 244-0879
Idler Group -- Rear (Small Diameter) (Arctic) 2 -- 244-0878
Seal -- Duo-Cone Group (Inverted) 2 7T-5125 --
2
Toric Ring 1 7T-1093 --
O-Ring 2 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7863
Toric Ring 2 2 -- 162-2167
1 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all small diameter idlers
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Use (1) 8P5069 Thrust Washer and (4) 8H4952 Dowels to repair former 9P0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E6619 Thrust Washer. See Special Instruction SEHS8515.
4 These components are not included in the idler group; quantities shown are required to mount each idler.

150
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

587T, 587R, 583T, 583R IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 111-1729
Components of Group
Idler Assembly 1 6Y-0553
1
Bearing 2 154-3298
Shaft 1 154-3307
Collar 2 107-3947
Retainer 2 107-3946
Thrust Washer 2 2 8E-6619
Bolt 24 5P-2546
Washer 24 3K-6113
Seal -- Duo-Cone Group (Symmetric) 2 162-7863
Toric Ring 1 2 162-2167
Seal -- Retainer 2 8F-9516
Seal -- Collar 2 107-4057
Stopper 1 9G-4872
Plug 1 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 1 306-9437
Block (Use with 306-9437 end cap) 1 9W-7882
End Cap (Abutment Style) 1 306-9439
Block (Use with 306-9439 end cap) 1 9W-7884
Bolt 4 8T-4934
Washer 4 3S-1349
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 8P5069 Thrust Washer and (4) 8H4952 Dowels to repair former 9P0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E6619 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

151
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

578 IDLERS
FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group -- Front (Large Diameter) 4 -- 111-1730
Components of Group
Idler Assembly (Front) 1 6Y-0556 6Y-0556
1
Bearing 2 154-3298 154-3298
Shaft 1 138-9712 154-3307
Collar 2 -- 107-3947
Retainer 2 9P-0201 107-3946
Thrust Washer 2 2 8E-6619 8E-6619
Bolt 24 5P-2546 5P-2546
Washer 24 3K-6113 3K-6113
Stabilizer Ring 2 6T-5247 --
Seal -- Duo-Cone Group (Inverted) 2 7T-0159 --
1
Toric Ring 1 8P-0021 --
O-Ring 1 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7863
Toric Ring 1 2 -- 162-2167
Seal -- Retainer 2 8F-9516 8F-9516
Seal -- Collar 2 -- 107-4057
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 306-9441 306-9441
Bolt 4 9W-4480 9W-4480
Washer 4 3S-1349 3S-1349
Insert 2 9W-4481 9W-4481
Special Application Arctic Idler Groups
Idler Group -- Front (Large Diameter) (Arctic) 2 -- 244-0879
Seal -- Duo-Cone Group (Inverted) 2 7T-5125 --
1
Toric Ring 1 7T-1093 --
O-Ring 1 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7863
Toric Ring 1 2 -- 162-2167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 8P5069 Thrust Washer and (4) 8H4952 Dowels to repair former 9P0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E6619 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

152
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N LANDFILL/SPECIAL APPLICATION IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group -- Front (Large Diameter) 2 244-1323
Group -- Rear (Small Diameter) 2 244-1324
Components of Group
Idler Assembly (Front) 1 6Y-0556
Idler Assembly (Rear) 1 6Y-0553
Bearing 1 2 154-3298
Shaft 1 154-3307
Collar 2 261-9673
Retainer 2 261-9672
2
Thrust Washer 2 8E-6619
Bolt 24 8C-6877
Washer 24 8T-5360
Plate 2 166-3324
Seal -- Duo-Cone Group (Symmetric) 2 162-7863
1
Toric Ring 2 162-2167
Seal -- Retainer 2 8F-9516
Seal -- Collar 2 107-4057
Stopper 1 9G-4872
Plug 1 6Y-0473
3
Mounting Hardware
End Cap (Abutment Style) 2 306-9441
Bolt 4 9W-4480
Washer 4 3S-1349
Insert 2 9W-4481
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 9W-8878
Toric Ring 1 2 107-4888
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 8P5069 Thrust Washer and (4) 8H4952 Dowels to repair former 9P0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E6619 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.

D8T, D8R, D8N, 587T, 587R, 583T, 583R CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) 2 246-0775 1
Mounting Hardware 2
End Cap (Abutment Style) 2 131-1651
Bolt 4 6T-1140
Washer 4 5P-8249
1 Refer to track roller section for component breakdown.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

153
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8R, D8N CARRIER ROLLERS

FORMER

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 8E-0400
Components of Group
Roller Shell 1 8E-0399
Shaft 1 8E-0398
Cup 2 7K-5448
Cone 2 7K-5449
Retaining Ring 1 8F-0737
Cover 1 5M-2043
Support 1 7H-2623
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 9W-2142
1
Toric Ring 2 162-2168
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 6H-3977
Plate 1 3T-6269
Bolt 2 6F-7030
Lock 1 0T-0329
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 8S-5656
Toric Ring 1 2 8S-5653
1 Component of preceding group; quantity shown is per group.

154
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N, 578 TRACK ROLLERS

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Double Flange (DF) 1 8 -- 246-0779 2
Single Flange (SF) 83 -- 246-0775 2
Components of Group
Roller Shell (DF) 1 9W-8709 4 246-0780
5
Roller Shell (SF) 1 9W-8710 284-5456
Bearing 6 2 9W-9844 9W-9844
Shaft 1 107-8084 107-8084
Collar 2 107-3945 107-3945
Retainer 2 107-8085 107-8085
7
Thrust Washer 2 8E-7510 8E-7510
Bolt 12 0S-1595 241-1855
Washer 12 5P-8245 5P-8245
Seal -- Duo-Cone Group (Symmetric) 2 162-7862 162-7862
Toric Ring 6 2 162-2166 162-2166
Seal -- Retainer 2 5F-3106 5F-3106
Seal -- Collar 2 7J-2036 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
8
Mounting Hardware
End Cap 9 2 131-1651 131-1651
Bolt 4 6T-1140 6T-1140
Washer 4 5P-8249 5P-8249
Special Application Roller Groups
Double Flange (DF) (Arctic) 8 -- 278-9540
Single Flange (SF) (Arctic) 8 -- 278-9539
Seal -- Duo-Cone Group (Symmetric) (Arctic) 2 162-7862 162-7862
Toric Ring (Arctic) 6 2 162-2166 162-2166
Double Flange (DF) (High Heat) 8 -- 278-9541
Single Flange (SF) (High Heat) 8 -- 278-9538
Seal -- Duo-Cone Group (Symmetric) (High Heat) 2 107-4889 107-4889
6
Toric Ring (High Heat) 1 9M-9730 9M-9730
Seal -- Retainer (High Heat) 2 4S-5898 4S-5898
1 D8R/N Non-suspended (Hardbottom) undercarriage use all double flange rollers groups.
2 Roller groups with longer retainer bolts (Ref IRM UC 01-09), effective serial numbers 6YZ00367 & UP, 7XM05116 & UP, 9EM01216 & UP.
3 10 Required for 578 Pipelayer.
4 Roller shell canceled and replaced by (1) 196-9948 Roller shell (12) 1A-1460 bolts.
5 Roller shell canceled and replaced by (1) 196-9949 Roller shell (12) 1A-1460 bolts.
6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
7 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E7510 Thrust Washer. See Special Instruction SEHS8515.
8 These components are not included in the roller group; quantities shown are required to mount each roller.
9 Abutment Style Design (Effective Serial Number 7XM3135-UP).

155
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N, 578 TRACK ROLLERS EARLY

INVERTED DUO-CONE SEAL GROUPS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 8 --
1
Single Flange (SF) 8 --
Components of Group
Roller Shell (DF) 1 9W-8709 2
Roller Shell (SF) 1 9W-8710 3
4
Bearing 2 9W-9844
Shaft 1 6T-7500
Retainer 2 9W-8047
Thrust Washer 5 2 8E-7510
Bolt 12 0S-1595
Washer 12 5P-8245
Stabilizer Ring 2 6T-4871
Seal -- Duo-Cone Group (Inverted) 2 7T-0158
Toric Ring 4 1 6P-8912
O-Ring 4 1 6V-2701
Seal -- Retainer 2 5F-3106
Stopper 1 9G-5664
Plug 1 6Y-0473
6
Mounting Hardware
End Cap (Abutment Style) 2 131-1651
Bolt 4 6T-1140
Washer 4 5P-8249
Special Application Seal Group
Seal -- Duo-Cone Group (Inverted) 2 7T-5133
Toric Ring 4 1 7T-1094
4
O-Ring 1 6V-2701
1 10 Required for 578 Pipelayer.
2 Roller Shell canceled and replaced by: (1) 196-9948 Roller Shell and (12) 1A-1460 bolts.
3 Roller Shell canceled and replaced by: (1) 196-9949 Roller Shell and (12) 1A-1460 bolts.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E7510 Thrust Washer. See Special Instruction SEHS8515.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

156
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

587T, 587R, 583T, 583R TRACK ROLLERS

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Double Flange (DF) 18 -- 198-6703 1
Components of Group
Roller Shell (DF) 1 153-3901 2 198-6704
3
Bearing 2 154-3298 154-3298
Shaft 1 138-9712 138-9712
Retainer 2 6Y-2946 6Y-2946
4
Thrust Washer 2 8E-6619 8E-6619
Bolt 12 0S-1585 1A-1460
Washer 12 5P-8245 5P-8245
Stabilizer Ring 2 6T-5247 6T-5247
Seal -- Duo-Cone Group (Inverted) 2 7T-0159 7T-0159
3
Toric Ring 1 8P-0021 8P-0021
3
O-Ring 1 6V-2700 6V-2700
Seal -- Retainer 2 8F-9516 8F-9516
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
5
Mounting Hardware
End Cap (Abutment Style) 2 131-1650 131-1650
Bolt 4 9X-8898 9X-8898
Washer 4 3K-5234 3K-5234
Special Application Roller Groups
Double Flange (DF) (Arctic) 18 -- 198-6859
Seal -- Duo-Cone Group (Arctic) 2 7T-5125 7T-5125
Toric Ring 3 1 7T-1093 7T-1093
3
O-Ring 1 6V-2700 6V-2700
1 Roller group with longer retainer bolts.
2 Roller shell canceled and replaced by: (1) Roller Shell 198-6704, (12) Bolts 1A-1460.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E7510 Thrust Washer. See Special Instruction SEHS8515.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

D8T FLEXIBLE IDLER WEAR GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard As. Front & Rear (Rubber) 4 163-2415
Plate 4 155-2754
Bolt (5/8 inch) 12 8T-6871
Washer 12 8T-4122

157
Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8R FLEXIBLE IDLER WEAR GUARDS

7XM5094 & UP, 6YZ0325 TO 329, 6YZ0331 & UP, AKA0324 & UP, 9EM1213 & UP

PART
(PER MACHINE) QUANTITY NUMBER
Guard As. Front & Rear (Rubber) 4 163-2415
Plate 4 155-2754
Bolt (5/8 inch) 12 8T-6871
Washer 12 8T-4122
Guard As. Rear Sides 4 155-2742
Bolt (5/8 inch) 12 7X-0345
Washer 12 8T-4122

D8N TRACK ROLLER GUARDS

NON-SUSPENDED UNDERCARRIAGE
1XJ

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 16 6Y-4006
Spacer 16 3P-8283
Bolt 16 7X-0383
Washer 32 8T-4223
Bolt 32 8C-4436

587T, 587R, 583T, 583R TRACK ROLLER GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 138-7761
Guard Assembly 4 138-7762
Guard Assembly 4 138-7763
Bolt 24 7X-0383
Spacer 24 3P-8283
Washer 24 5P-1076
Bolt 24 8C-4436

D8T, D8R, D8N, 578 TRACK GUIDES

BOGIE SUSPENSION
7XM, 9TC, 5TJ, 8HB, 9EM, KPZ, J8B

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 248-2987
Bolt 32 8T-8924
Washer 32 8T-4994

158
 Elevated Sprocket Tractors
D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N TRACK GUIDES

NON-SUSPENDED UNDERCARRIAGE

PART
(PER MACHINE) QUANTITY NUMBER
Guide 28 248-2987
Bolt 56 8T-8924
Washer 56 8T-4994

D8T, D8R, D8N BOGIE PADS

7XM, 9TC, 5TJ, 9EM, KPZ, J8B

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 7T-4700
Bolt 64 7X-0307
Washer 64 8T-5360

578 BOGIE PADS

8HB

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 7T-5510
Bolt 64 5P-2228
Washer 64 5P-1076

D8T, D8R, D8N, 578 CARTRIDGE PINS

BOGIE SUSPENSION
5TJ, 7XM, 8HB, 9EM, 9TC, KPZ, J8B

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9307
Pin Assembly (Arctic Applications) 32 266-3152
Pin Assembly (Steel Mill Applications) 32 1Z-9353

159
 Elevated Sprocket Tractors
D8L

D8L TRACK
53Y, 7JC, 7YB
8.50" (215.9 mm) PITCH -- 7/8" BOLT

FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly -- 45 Section 2 -- 1 6I-8665 2
Track Links
RH Pin End Master 1 223-1617 8E-4059
LH Pin End Master 1 223-1618 8E-4060
RH Bushing End Master 1 8E-4457 8E-4457
LH Bushing End Master 1 8E-4458 8E-4458
RH Regular 44 8E-4519 8E-4505
LH Regular 44 8E-4520 8E-4506
Other Components
Pin 44 199-2794 199-2794
Master Pin 1 9W-5588 9W-5588
Bushing 45 6Y-3914 6Y-3914
Retaining Ring 2 3T-9118 3T-9118
Seal Assembly (Rigid) 90 239-7943 239-7943
Thrust Ring 90 152-8073 152-8073
Stopper 45 7G-4332 7G-4332
Plug 45 6Y-0473 6Y-0473
3
Track Hardware
Bolt 176 6V-1723 6V-1723
Nut 176 7G-6442 7G-6442
Master Bolt (Long) 2 6V-1725 6V-1725
Master Bolt (Short) 2 6V-1724 6V-1724
Special Set/Group
Seal Set (90 Seal Assemblies) 1 272-6013 272-6013
1 Upgrade to 6I8665 Link Assembly.
2 Current D8L link assemblies consist of D8N components; refer to IRM UC93-6. When installing this link assembly for the first time, also refer to
Special Instruction SEHS9720 modification requirements.
3 Not part of link assembly; required to assemble track group.

D8L MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 6I-8665
Extreme Service Shoe -- 22" (560 mm) 2 6I-8837
Extreme Service Shoe -- 24" (610 mm) 2 6I-8835

160
 Elevated Sprocket Tractors
D8L

D8L SPECIAL APPLICATION TRACK 1

4FB
8.50" (215.9 mm) PITCH -- 7/8" BOLT

FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly -- 45 Section 2 -- 2 6I-8842 3
Track Links
RH Pin End Master 1 223-1617 8E-4059
LH Pin End Master 1 223-1618 8E-4060
RH Bushing End Master 1 8E-4457 8E-4457
LH Bushing End Master 1 8E-4458 8E-4458
RH Regular 44 8E-4519 8E-4505
LH Regular 44 8E-4520 8E-4506
Other Components
Pin 44 6Y-2150 6Y-2150
Master Pin 1 6V-2149 6V-2149
Bushing 45 6I-8691 6I-8691
Retaining Ring 2 3T-9118 3T-9118
Seal Assembly 90 239-7943 239-7943
Thrust Ring 90 152-8073 152-8073
Stopper 45 7G-4332 7G-4332
Plug 45 6Y-0473 6Y-0473
4
Track Hardware
Bolt 176 6V-1723 6V-1723
Nut 176 7G-6442 7G-6442
Master Bolt (Long) 2 6V-1725 6V-1725
Master Bolt (Short) 2 6V-1724 6V-1724
Special Set/Group
Seal Set (90 Seal Assemblies) 1 272-6013 272-6013
1 Special track which includes polished pins and bushings and special high temperature oil for high speed/high drawbar agricultural applications.
2 Upgrade to 6I8842 Link Assembly.
3 Current D8L link assemblies consist of D8N components; refer to IRM UC93-6. When installing this link assembly for the first time, also refer to
Special Instruction SEHS9720 modification requirements.
4 Not part of link assembly; required to assemble track group.

161
 Elevated Sprocket Tractors
D8L

D8L TRACK SHOES

8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART
TYPE WIDTH NUMBER
Super Extreme Service 1 24.0" (610 mm) 115-1385
Extreme Service 22.0" (560 mm) 7T-2390
Extreme Service 24.0" (610 mm) 7T-2392
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 1Z-9422
Extreme Service 26.0" (660 mm) 7T-2394
Extreme Service (Trapezoidal Opening) 26.0" (660 mm) 9W-5541
Moderate Service 22.0" (560 mm) 7G-6448
Moderate Service (Trapezoidal Opening) 22.0" (560 mm) 1Z-9983
Moderate Service 24.0" (610 mm) 9P-2661
Moderate Service (Trapezoidal Opening) 24.0" (610 mm) 1Z-9960
Moderate Service 26.0" (660 mm) 9P-2665
Moderate Service (Trapezoidal Opening) 26.0" (660 mm) 6T-7405
Moderate Service 28.0" (710 mm) 7G-6454
Moderate Service (Trapezoidal Opening) 28.0" (710 mm) 1Z-9425
Moderate Service 36.0" (915 mm) 7T-2310
Chopper (Trapezoidal Opening) 24.0" (610 mm) 8E-9799
1 Modified D9L ES Track Shoe Section.

D8L SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 3 163-6406
Sprocket Segment (4 Tooth) 3 102-6685
Nut Strip 6 115-1147
1
Nut 3 7H-3608
Bolt 27 5P-4130
Washer 27 034-0707
1 To be used with 163-6406 Sprocket Segment. Refer to IRM UC99-8 for addition information.

162
 Elevated Sprocket Tractors
D8L

D8L IDLERS
FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group 4 -- 111-1730
Components of Group
Idler Assembly 1 6Y-0556 6Y-0556
1
Bearing 2 154-3298 154-3298
Shaft 1 138-9712 154-3307
Collar 2 -- 107-3947
Retainer 2 9P-0201 107-3946
Thrust Washer 2 2 8E-6619 8E-6619
Bolt 24 5P-2546 5P-2546
Washer 24 3K-6113 3K-6113
Stabilizer Ring 2 6T-5247 --
Seal -- Duo-Cone Group (Inverted) 2 7T-0159 --
1
Toric Ring 1 8P-0021 --
O-Ring 1 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7863
Toric Ring 1 2 -- 162-2167
Seal -- Retainer 2 8F-9516 8F-9516
Seal - Collar 2 -- 107-4057
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware
End Cap 4 2 306-9441 306-9441
5
End Cap 2 131-1650 131-1650
Bolt 6 4 6T-1139 6T-1139
7
Bolt 4 1D-4642 1D-4642
8
Bolt 4 6V-1726 6V-1726
Bolt 9 4 9W-4480 9W-4480
Washer 4 3S-1349 3S-1349
Insert 2 9W-4481 9W-4481
Special Application Arctic Idler Groups
Idler Group (Arctic) 4 -- 244-0879
Seal -- Duo-Cone Group (Inverted) 2 7T-5125 --
1
Toric Ring 1 7T-1093 --
1
O-Ring 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7863
Toric Ring 1 2 -- 162-2167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 8P5169Thrust Washer and (4) 8H4952 Dowels to repair former 9P0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E6619
Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.
4 Used with 1-1/8" Bolt. (Abutment Style Design)
5 Used with 1" Bolt. (Abutment Style Design)
6 1" - 8 x 3.82" Bolt.
7 1" - 8 x 5.0" Bolt.
8 1" - 14 x 3.82" Bolt.
9 1-1/8" - 7 x 5.5" Bolt.

163
 Elevated Sprocket Tractors
D8L

D8L TRACK ROLLERS

EARLY FORMER
PART PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER NUMBER
Double Flange (DF) 8 -- -- 246-0779 1
Single Flange (SF) 8 -- -- 246-0775 1
Components of Group
Roller Shell (DF) 1 9W-8709 2 9W-8709 2 246-0780
3 3
Roller Shell (SF) 1 9W-8710 9W-8710 284-5456
Bearing 4 2 9W-9844 9W-9844 9W-9844
Shaft 1 6T-7500 107-8084 107-8084
Collar 2 -- 107-3945 107-3945
Retainer 2 9W-8047 107-8085 107-8085
5
Thrust Washer 2 8E-7510 8E-7510 8E-7510
Bolt 12 0S-1595 0S-1595 1A-1460
Washer 12 5P-8245 5P-8245 5P-8245
Stabilizer Ring 2 6T-4871 -- --
Seal -- Duo-Cone Group (Inverted) 2 7T-0158 -- --
4
Toric Ring 1 6P-8912 -- --
4
O-Ring 1 6V-2701 -- --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7862 162-7862
Toric Ring 4 2 -- 162-2166 162-2166
Seal -- Retainer 2 5F-3106 5F-3106 5F-3106
Seal -- Collar 2 -- 7J-2036 7J-2036
Stopper 1 9G-5664 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473 6Y-0473
6
Mounting Hardware
End Cap (Abutment Style) 2 131-1651 131-1651 131-1651
Bolt 4 6T-1140 6T-1140 6T-1140
Washer 4 5P-8249 5P-8249 5P-8249
Special Application Roller Groups
Double Flange (DF) (Artic) 8 -- -- 278-9540
Single Flange (SF) (Artic) 8 -- -- 278-9539
Seal - Duo-Cone Group (Symmetric) (Arctic) 2 - 162-7862 162-7862
4
Toric Ring (Arctic) 2 - 162-2166 162-2166
Double Flange (DF) (High Heat) 8 - - 278-9541
Single Flange (SF) (High Heat) 8 - - 278-9538
Seal -- Duo-Cone Group (Symmetric) 2 -- 107-4889 107-4889
Toric Ring 4 2 -- 9M-9730 9M-9730
Seal - Retainer (High Heat) 2 - 4S-5898 4S-5898
Seal -- Duo-Cone Group (Inverted) 2 7T-5133 -- --
Toric Ring 4 1 7T-1094 -- --
4
O-Ring 1 6V-2701 -- --
1 Roller groups with longer retainer bolts.
2 Roller shell canceled and replaced by (1) 196-9948 Roller shell & (12) 1A-1460 bolts.
3 Roller shell canceled and replaced by (1) 196-9949 Roller shell & (12) 1A-1460 bolts.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9W8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E7510 Thrust Washer. See Special Instruction SEHS8515.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

164
 Elevated Sprocket Tractors
D8L

D8L TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 184-4395
Bolt 32 1A-8063
Washer 32 5P-8248

D8L BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 7T-5510
Bolt 64 0S-1621
Washer 64 5P-1076

D8L CARTRIDGE PINS

8.50" (215.9 mm) PITCH -- 7/8" BOLT

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9307
Pin Assembly (Arctic Applications) 32 266-3152
Pin Assembly (Steel Mill Applications) 32 1Z-9353

165
 Elevated Sprocket Tractors
D9L, 589

D9L TRACK
NON-POSITIVE PIN RETENTION (NON-PPR) TRACK
14Y
9.00" (228.6 mm) PITCH -- 1" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 47 Section 2 6Y-2887
Track Links
RH Pin End Master 1 250-4215
LH Pin End Master 1 250-4216
RH Bushing End Master 1 250-4219
LH Bushing End Master 1 250-4220
RH Regular 46 7T-7629
LH Regular 46 7T-7630
Other Components
Pin 46 6Y-2146
Master Pin 1 6Y-2147
Bushing 47 6Y-2141
Seal Assembly (Rigid Seal) 94 207-0545
Thrust Ring 94 9W-2755
Retaining Ring 2 7G-7198
Stopper 47 7G-4332
Plug 47 6Y-0473
1
Track Hardware
Bolt 184 6V-1726
Nut 184 7G-0343
Master Bolt (Long) 2 6V-1728
Master Bolt (Short) 2 7T-2283
Special Sets/Groups
Seal Set (94 Seal Assemblies) 1 249-7174
1 Not part of link assembly; required to assemble track group.

D9L MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
Non PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 6Y-2887
Extreme Service Shoe -- 24" (610 mm) 2 7T-7666

166
 Elevated Sprocket Tractors
D9L, 589

D9L, 589 TRACK

POSITIVE PIN RETENTION (PPR) TRACK
D9L: 14Y, 589: 31Z
9.00" (228.6 mm) PITCH -- 1" BOLT

PART D9L 589

NUMBER 47 Section 53 Section
Link Assembly -- (Quantity 2) 199-5534 199-5533
Track Links
RH Pin End Master 250-4217 1 1
LH Pin End Master 250-4218 1 1
RH Bushing End Master 250-4219 1 1
LH Bushing End Master 250-4220 1 1
RH Regular 7T-4137 46 52
LH Regular 7T-4138 46 52
Other Components
Pin 186-0780 47 53
Bushing 6Y-2141 47 53
Seal Assembly (Rigid Seal) 207-0545 94 106
1
Thrust Ring 9W-2755 94 106
Retaining Ring (PPR) 6Y-0470 94 106
Stopper 7G-4332 47 53
Plug 6Y-0473 47 53
2
Track Hardware
Bolt 6V-1726 184 208
Nut 7G-0343 184 208
Master Bolt (Long) 6V-1728 2 2
Master Bolt (Short) 7T-2283 2 2
Special Sets/Groups
Seal Set (94 Seal Assemblies) 249-7174 1 1
Retaining Ring Group (106 Retaining Rings) 9W-4265 1 1
3
Thrust Ring Facing Group 9W-9674 1 1
1 9W-9619 ring assembly contains two facing rings already applied to the 9W-2755 thrust ring.
2 Not part of link assembly; required to assemble track group.
3 Contains 430 facing rings to service 2 link assemblies.

D9L MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES
PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 199-5534
Extreme Service Shoe -- 24" (610 mm) 2 204-9748
Extreme Service Shoe -- 27" (685 mm) 2 203-0944

167
 Elevated Sprocket Tractors
D9L, 589

D9L TRACK SHOES

9.00" (228.6 mm) PITCH -- 1" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 24.0" (610 mm) 3T-8493 9W-1851
Extreme Service 27.0" (685 mm) 3T-8496 9W-1855
Extreme Service 30.0" (760 mm) 3T-8499 9W-1852
Moderate Service 24.0" (610 mm) 3T-2758 9W-1853
Moderate Service 27.0" (685 mm) 7G-3766 9W-1850
Moderate Service (Trapezoidal Opening) 27.0" (685 mm) 1Z-9479 1Z-9478
Moderate Service 30.0" (760 mm) 7G-7150 9W-1854

589 TRACK SHOES

9.00" (228.6 mm) PITCH -- 1" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service (Clipped Grouser) 1 36.0" (915 mm) 3T-8502 3T-8501
1 Clipped grouser, reduces snag loading.

D9L, 589 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 3 157-4292
Sprocket Segment (4 Tooth) 3 102-6680
Bolt 27 9W-8328
1
Nut 3 7H-3609
Nut Strip 6 115-1176
Washer 27 5P-6604
1 To be used with 157-4292 Sprocket Segment. Refer to IRM UC99-8 for additional information.

D9L SPROCKET
Converted to D10R/N Undecarriage

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Gp (Contains 3 segments) 1 234-7703 1
Bolt 27 9W-8328
Nut 27 7H-3609
Washer 27 5P-6604
1 Refer to IRM UC04-15 for further information. This segment group includes all three segments, former design required ordering the individual
"9W" segments.

168
 Elevated Sprocket Tractors
D9L, 589

D9L, 589 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 9W-6039
Components of Group
Idler Assembly 1 9W-6037
1
Bearing 2 9W-4194
Shaft 1 140-0291
Retainer Assembly 2 142-2803
Bolt 24 4K-5175
Washer 24 3H-7654
Stabilizer Ring 2 6T-5246
Seal -- Duo-Cone Group 2 7T-0157
Toric Ring 1 1 8H-2262
O-Ring 1 1 6V-2698
Seal -- Retainer 2 8F-8733
Stopper 1 9G-4872
Plug 1 6Y-0473
2
Mounting Hardware
End Cap (Abutment Style) 3 2 131-1649
4
End Cap (Abutment Style) 2 131-1649
End Cap (Abutment Style) 5 2 306-9431
3
Bolt 4 8T-4934
4
Bolt 4 2D-3424
Bolt 5 4 9W-4488
Washer 3 4 3S-1349
Washer 4 4 3S-1349
5
Washer 4 4K-0684
Wedge (Use with former cap design) 2 109-8014
Insert 2 9W-4489
Special Application Arctic Idler Group
Idler Group 4 9W-6038
Seal -- Duo-Cone Group 2 6V-2614
1
Toric Ring 1 9M-9730
O-Ring 1 1 6V-2698
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.
3 Used with 1-1/8" -- 7 bolt.
4 Used with 1-1/8" -- 12 bolt.
5 Used with 1-1/4" -- 7 bolt.

169
 Elevated Sprocket Tractors
D9L, 589

589 CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group (Single Flange (SF) 2 6Y-2950 1
Mounting Hardware 2
End Cap 2 6T-4964
End Cap 2 6T-4965
Bolt 4 7X-0444
Washer 4 8T-5361
1 Refer to track roller section for component breakdown.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

D9L, 589 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 81 6Y-2951
Single Flange (SF) 8 6Y-2950
Components of Group
Roller Shell (DF) 1 6Y-2953
Roller Shell (SF) 1 6Y-2952
2
Bearing 2 9W-9499
Shaft 1 8E-6661
Retainer 2 6Y-2946
3
Thrust Washer 2 8E-6619
Bolt 12 0S-1595
Stabilizer Ring 2 6T-5247
Seal -- Duo-Cone Group 2 7T-0159
Toric Ring 2 1 8P-0021
O-Ring 2 1 6V-2700
Seal -- Retainer 2 8F-9516
Stopper 1 9G-5664
Plug 1 6Y-0473
4
Mounting Hardware
End Cap 2 131-1650
Bolt 4 6T-1139
Washer 4 3K-5234
Special Application Roller Groups
Double Flange (DF) (Arctic) 8 6Y-2949
Single Flange (SF) (Arctic) 8 6Y-2948
Seal -- Duo-Cone Group 2 7T-5125
Toric Ring 2 1 7T-1093
2
O-Ring 1 6V-2700
1 589 Pipelayer uses 12 Double Flange groups.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Use (1) 8P5169 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8687 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E6619 Thrust Washer. See Special Instruction SEHS8515.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

170
 Elevated Sprocket Tractors
D9L, 589

D9L TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 184-4396
Bolt 32 7X-0386
Washer 32 8C-6913

589 TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 20 184-4396
Bolt 40 7X-0386
Washer 40 8C-6913

D9L BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 7T-5959
Bolt 64 5P-2228
Washer 64 5P-1076

589 BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 20 7T-5959
Bolt 80 5P-2228
Washer 80 5P-1076

D9L CARTRIDGE PINS

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9309
Pin Assembly (Arctic Applications) 32 251-3273

589 CARTRIDGE PINS

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 40 7T-9309
Pin Assembly (Arctic Applications) 40 251-3273

171
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N TRACK

POSITIVE PIN RETENTION (PPR) TRACK
1JD, 6XJ, 7TL, 8BL, ACL, ABK, RJS
9.45" (240.0 mm) PITCH -- 1" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 43 Section 2 199-5525
Track Links
RH Pin End Master 1 250-4245
LH Pin End Master 1 250-4246
RH Bushing End Master 1 250-4247
LH Bushing End Master 1 250-4248
RH Regular 42 7T-2275
LH Regular 42 7T-2276
Other Components
Pin 43 186-0780
Bushing 43 186-0781
Seal Assembly (Rigid) 86 207-0545
Thrust Ring 86 9W-2755 1
Retaining Ring (PPR) 86 6Y-0470
Stopper 43 7G-4332
Plug 43 6Y-0473
2
Track Hardware
Bolt 168 6T-2638
Nut 168 7G-0343
Master Bolt (Long) 2 6V-1728
Master Bolt (Short) 2 7T-2283
Special Sets/Groups
Seal Set (94 Seal Assemblies) 1 249-7174
Retaining Ring Group (106 Retaining Rings) 1 9W-4265
3
Thrust Ring Facing Group 1 9W-9674
1 9W-9619 ring assembly contains two facing rings already applied to the 9W-2755 thrust ring.
2 Not part of link assembly; required to assemble track group.
3 Contains 430 facing rings to service 2 link assemblies.

172
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 199-5525
Extreme Service Shoe -- 22" (560 mm) 2 7T-2289
Extreme Service Shoe -- 24" (610 mm) 2 199-5537
Extreme Service Shoe -- 27" (685 mm) 2 199-5538
Extreme Service Shoe -- 27" (685 mm) (Trap) 2 183-2122
Super Extreme Service Shoe -- 24" (610 mm) 2 203-2199
Super Extreme Service Shoe -- 27" (685 mm) 2 203-2200

D9T, D9R, D9N TRACK

NON-POSITIVE PIN RETENTION (NON-PPR) TRACK
1JD, 6XJ, 7TL, 8BL, ACL, ABK, RJS
9.45" (240.0 mm) PITCH -- 1" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 43 Section 2 199-5531
Track Links
RH Pin End Master 1 250-4243
LH Pin End Master 1 250-4244
RH Bushing End Master 1 250-4247
LH Bushing End Master 1 250-4248
RH Regular 42 9W-2743
LH Regular 42 9W-2744
Other Components
Pin 42 199-5522
Master Pin 1 199-5523
Bushing 43 186-0781
Seal Assembly (Rigid) 86 207-0545
Thrust Ring 86 9W-2755
Stopper 43 7G-4332
Plug 43 6Y-0473
Track Hardware 1
Bolt 168 6T-2638
Nut 168 7G-0343
Master Bolt (Long) 2 6V-1728
Master Bolt (Short) 2 7T-2283
Special Sets/Groups
Seal Set (94 Seal Assemblies) 1 249-7174
1 Not part of link assembly; required to assemble track group.

173
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
Non-PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 199-5531
Super Extreme Service Shoe -- 24" (610 mm) 2 228-9812

D9T, D9R, D9N TRACK SHOES

9.45" (240.0 mm) PITCH -- 1" BOLT

PART
TYPE WIDTH NUMBER
Super Extreme Service 1 24.0" (610mm) 139-0617
1
Super Extreme Service 27.0" (685 mm) 1Q-4755
Super Extreme Service (ARM) 1 24.0" (610mm) 243-4365
Super Extreme Service (ARM) 1 27.0" (685 mm) 243-4366
Extreme Service 22.0" (560 mm) 7T-2288
Extreme Service 24.0" (610 mm) 7T-2294
Extreme Service 27.0" (685 mm) 9W-2738
Extreme Service (ARM) 2 22.0" (560 mm) 243-4370
Extreme Service (ARM) 2 27.0" (685 mm) 232-3326
2
Extreme Service (ARM) 24.0" (610 mm) 243-4368
Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 234-5977
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 234-5975
Extreme Service (Trapezoidal Opening) 27.0" (685 mm) 234-5974
Extreme Service (Clipped Grouser) 27.0" (685mm) 1Q-4649
Moderate Service 30.0" (760 mm) 121-5907
Moderate Service (ARM) 2 30.0" (760 mm) 243-4367
Moderate Service (Trapezoidal Opening) 30.0" (760 mm) 234-6084
Chopper (Trapezoidal Opening) 26.0" (660 mm) 9U-9577
1 Modified D9L Extreme Service Shoe. MADE AS ORDERED. When the order is placed, allow 2 or 3 months for shoes to be delivered.
2 MADE AS ORDERED. When the order is placed, allow 2 or 3 months for shoes to be delivered.

D9T, D9R, D9N SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) ( 5 Tooth) 5 278-2376
Bolt 30 7T-1248
Nut 30 7H-3609
Washer 30 5P-8249

174
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N IDLERS

7TL1057-UP, 8BL1352-UP

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group 4 -- 125-4655
Components of Group
Idler Assembly 1 7T-2770 7T-2770
1
Bearing 2 9W-9499 9W-9499
Shaft 1 138-9378 154-3309
Collar 2 -- 107-3947
Retainer 2 9P-0201 107-3946
Thrust Washer 2 2 8E-6619 8E-6619
Bolt 24 5P-2546 5P-2546
Washer 24 3K-6113 3K-6113
Stabilizer Ring 2 6T-5247 --
Seal -- Duo-Cone Group (Inverted Design) 2 7T-0159 --
1
Toric Ring 1 8P-0021 --
O-Ring 1 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863
Toric Ring 1 2 -- 162-2167
Seal -- Retainer 2 8F-9516 8F-9516
Seal -- Collar 2 -- 107-4057
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware
End Cap (Two Bolt Design, Abutment Style) 2 306-9441 306-9441
Bolt 4 9W-4480 9W-4480
Washer 4 3S-1349 3S-1349
4
End Cap (Three Bolt Design, Abutment Style) 1 306-9443 306-9443
4
End Cap (Three Bolt Design, Abutment Style) 1 306-9445 306-9445
Bolt 6 9W-4480 9W-4480
Washer 6 3S-1349 3S-1349
Wedge (Use with former cap design) 2 107-8040 --
Insert 2 9W-4481 9W-4481
Special Application Arctic Idler Groups
Idler Group (Arctic) 4 -- 245-9942
Seal -- Duo-Cone Group (Inverted Design) 2 7T-5125 --
1
Toric Ring 1 7T-1093 --
O-Ring 1 1 6V-2700 --
Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863
1
Toric Ring 2 -- 162-2167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 8P-5169 Thrust Washer and (4) 8H-4952 Dowels to repair former 9P-0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E-6619 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.
4 Effective serial numbers: 7TL703-UP and 8BL934-UP.

175
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N LANDFILL/SPECIAL APPLICATION IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 167-1947
Components of Group
Idler Assembly 1 7T-2770
1
Bearing 2 9W-9499
Shaft 1 154-3309
Collar 2 261-9672
Retainer 2 261-9673
Thrust Washer 2 2 8E-6619
Bolt 24 8C-6877
Washer 24 8T-5360
Plate 4 166-3324
Seal -- Duo-Cone Group (Symmetric Design) 2 162-7863
1
Toric Ring 2 162-2167
Seal -- Retainer 2 8F-9516
Seal -- Collar 2 107-4057
Stopper 1 9G-4872
Plug 1 6Y-0473
3
Mounting Hardware
End Cap (Two Bolt Design, Abutment Style) 2 306-9441
Bolt 4 9W-4480
Washer 4 3S-1349
End Cap (Three Bolt Design, Abutment Style) 4 1 306-9443
End Cap (Three Bolt Design, Abutment Style) 4 1 306-9445
Bolt 6 9W-4480
Washer 6 3S-1349
Insert 2 9W-4481
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group (Symmetric) 2 107-4889
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 8P-5169 Thrust Washer and (4) 8H-4952 Dowels to repair former 9P-0202 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E-6619 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.
4 Effective serial numbers: 7TL703-UP and 8BL934-UP.

176
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group - Single Flange (SF) 2 196-9955 1
Mounting Hardware 2
End Cap 4 6T-4504
Bolt 4 7X-0393
Washer 4 8C-6913
1 Refer to Track Roller Section for component breakdown.
2 These components are not included in the roller group. Quantities shown are required to mount each roller.

177
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R, D9N TRACK ROLLERS

EARLY FORMER
PART PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER NUMBER
Double Flange (DF) 8 -- -- 196-9954 1
Single Flange (SF) 8 -- -- 196-9955 1
Components of Group
Roller Shell (DF) 1 104-8577 2 104-8577 2 196-9956
3 3
Roller Shell (SF) 1 104-8576 104-8576 196-9957
Bearing 4 2 9W-9844 9W-9844 9W-9844
Shaft 1 8E-6643 104-3494 104-3494
Retainer 2 6I-9719 107-3944 107-3944
Collar 2 -- 107-3945 107-3945
5
Thrust Washer 2 8E-7510 8E-7510 8E-7510
Bolt 12 0S-1595 0S-1595 1A-1460
Washer 12 5P-8245 5P-8245 5P-8245
Stabilizer Ring 2 6T-4871 -- --
Seal -- Duo-Cone Group (Inverted) 2 7T-0158 -- --
4
Toric Ring 1 6P-8912 -- --
4
O-Ring 1 6V-2701 -- --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7862 162-7862
Toric Ring 4 2 -- 162-2166 162-2166
Seal -- Retainer 2 5F-3106 5F-3106 5F-3106
Seal -- Collar 2 -- 7J-2036 7J-2036
Stopper 1 9G-4872 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473 6Y-0473
6
Mounting Hardware
End Cap 7 2 131-1651 131-1651 131-1651
Bolt 4 6T-1140 6T-1140 6T-1140
Washer 4 5P-8249 5P-8249 5P-8249
Special Application Roller Groups
Double Flange (DF) (Arctic) 8 -- -- 245-9944
Single Flange (SF) (Arctic) 8 -- -- 245-9943
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7862 162-7862
4
Toric Ring 2 -- 162-2166 162-2166
Double Flange (DF) (Steel Mill) 8 -- 245-9946
Single Flange (SF) (Steel Mill) 8 -- 245-9945
Seal -- Duo-Cone Group (Symmetric) 2 -- 107-4889 107-4889
Toric Ring 4 2 -- 9M-9730 9M-9730
Seal -- Retainer 2 -- 4S-5898 4S-5898
Seal -- Duo-Cone Group (Inverted) 2 7T-5133 -- --
Toric Ring 4 1 7T-1094 -- --
4
O-Ring 1 6V-2701 -- --
1 Roller Groups with longer retainer bolt (ref IRM UC01-09), effective serial numbers ABK00471 & UP, ACL00678 & UP.
2 Roller Shell canceled and replaced by (1) 196-9956 roller shell and (12) 1A-1460 bolts.
3 Roller Shell canceled and replaced by (1) 196-9957 roller shell and (12) 1A-1460 bolts.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 Use (1) 9G-9342 Thrust Washer and (4) 8H-4952 Dowels to repair former 9W-6633 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E-7510 Thrust Washer. See Special Instruction SEHS8515.
6 These components are not included in the roller group; quantities shown are required to mount each roller.
7 Abutment Style Design (Effective Serial Numbers 8BL1281-UP, 7TL1017-UP)

178
 Elevated Sprocket Tractors
D9T, D9R, D9N

D9T, D9R FLEXIBLE IDLER WEAR GUARDS

ABK0438-UP, ACL0656-UP

PART
(PER MACHINE) QUANTITY NUMBER
Guard As. Front & Rear 4 165-7855
Plate 4 165-7860
Bolt (5/8 inch) 12 8T-6871
Washer 12 8T-4122
Guard As. Rear Sides (RH) 2 165-7861
Guard As. Rear Sides (LH) 2 165-7862
Bolt (5/8 inch) 12 7X-0345
Washer 12 8T-4122

D9T, D9R, D9N TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 184-4395
Bolt 32 8C-6857
Washer 32 8T-4994

D9T, D9R, D9N BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 7T-5419
Bolt 64 5P-2228
Washer 64 5P-1076

D9T, D9R, D9N CARTRIDGE PINS

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9307
Pin Assembly (Arctic Applications) 32 266-3152
Pin Assembly (Steel Mill Applications) 32 1Z-9353

179
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N TRACK

POSITIVE PIN RETENTION (PPR) TRACK
2YD, 3SK, 3KR, AKT, RJG
10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 44 Section 2 238-9851
Track Links
RH Pin End Master 1 290-7311
LH Pin End Master 1 290-7312
RH Bushing End Master 1 234-6943
LH Bushing End Master 1 234-6944
RH Regular 43 7T-0715
LH Regular 43 7T-0716
Other Components
Pin 44 6Y-1579
Bushing 44 6Y-2057
Seal Assembly (Rigid) 88 222-7001
1
Seal Assembly (Rigid) (Post Turn Seal) 88 252-6327
Thrust Ring 88 235-2213 2
Retaining Ring (PPR) 88 6Y-0471
Stopper 44 7G-4332
Plug 44 6Y-0473
3
Track Hardware
Bolt 172 7T-1000
Nut 172 5P-8221
Master Bolt (Long) 2 7T-0998
Master Bolt (Short) 2 7T-0999
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 239-5272
1
Seal Set (Post Turn Seal) (92 Seal Assemblies) 1 252-6329
4
Post Turn Seal/Thrust Ring Set 1 254-3971
Retaining Ring Group (104 Retaining Rings) 1 9W-4264
Thrust Ring Facing Group 1 239-5509
1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.
2 238-9854 ring assembly contains two facing rings already applied to the 235-2213 thrust ring.
3 Not part of link assembly; required to assemble track group.
4 Contains (92) 252-6327 Post Turn Seals, (92) 235-2213 Thrust Rings.

180
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 238-9851
Extreme Service Shoe -- 24" (610 mm) 2 7T-0723
Extreme Service Shoe -- 28" (710 mm) 2 7T-4608
Extreme Service Shoe -- 28" (710 mm) (Trap) 2 183-2131
Super Extreme Service Shoe -- 24" (610 mm) 2 1Q-4636
Super Extreme Service Shoe -- 28" (710 mm) 2 130-5641

181
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N TRACK

NON-POSITIVE PIN RETENTION (NON-PPR) TRACK
2YD, 3SK, 3KR, RJG
10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 44 Section 2 238-9852
Track Links
RH Pin End Master 1 290-7313
LH Pin End Master 1 290-7314
RH Bushing End Master 1 234-6943
LH Bushing End Master 1 234-6944
RH Regular 43 9W-5265
LH Regular 43 9W-5266
Other Components
Pin 43 6Y-1578
Master Pin 1 6Y-1577
Bushing 44 6Y-2057
Seal Assembly (Rigid) 88 222-7001
Seal Assembly (Rigid) (Post Turn Seal) 1 88 252-6327
Thrust Ring 88 235-2213
Retaining Ring 2 9W-6854
Stopper 44 7G-4332
Plug 44 6Y-0473
Track Hardware 2
Bolt 172 7T-1000
Nut 172 5P-8221
Master Bolt (Long) 2 7T-0998
Master Bolt (Short) 2 7T-0999
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 239-5272
1
Seal Set (Post Turn Seal) (92 Seal Assemblies) 1 252-6329
Post Turn Seal/Thurst Ring Set 3 1 254-3971
1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.
2 Not part of link assembly; required to assemble track group.
3 Contains (92) 252-6327 Post Turn Seals, (92) 235-2213 Thrust Rings.

D10T, D10R, D10N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES
Non PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 238-9852
Extreme Service Shoe -- 28" (710 mm) 2 236-8805
Super Extreme Service Shoe -- 24" (610 mm) 2 220-7079

182
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N TRACK SHOES

10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Super Extreme Service 24.0" (610 mm) 276-2414 276-2416
Super Extreme Service 28.0" (710 mm) 276-2417 276-2418
Super Extreme Service (ARM) 24.0" (610 mm) 228-7597 228-7598
Super Extreme Service (ARM) 28.0" (710 mm) 226-0268 226-0269
Extreme Service 24.0" (610 mm) 7T-0724 9W-1867
Extreme Service 28.0" (710 mm) 7T-4607 9W-1870
Extreme Service 30.0" (760 mm) 6Y-2534 6Y-2536
Extreme Service (Clipped Grouser) 30.0" (760 mm) 1Q-4651 6Y-2536
Extreme Service 31.5" (800 mm) 7T-4605 9W-1869
1
Extreme Service (ARM) 24.0" (610 mm) 239-2309 239-2310
Extreme Service (ARM) 1 28.0" (710 mm) 209-4542 209-4541
1
Extreme Service (ARM) 30.0" (760 mm) 243-4372 243-4373
1
Extreme Service (ARM) 31.5" (800 mm) 243-4374 243-4375
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 234-6033 234-6029
Extreme Service (Trapezoidal Opening) 28.0" (710 mm) 234-6031 234-6030
Extreme Service (Trapezoidal Opening) 31.5" (800 mm) 234-6032 234-6028
1 MADE AS ORDERED. When the order is placed, allow 2 or 3 months for shoes to be delivered.

D10T, D10R, D10N SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 278-2374
Bolt 30 5P-5422
Nut 30 2M-5656
Washer 30 5P-8250

183
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N IDLERS

3KR1178-UP
INTRODUCTION OF SYMMETRIC SEAL DESIGN

FORMER
PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER
Group 4 -- 125-3537
Components of Group
Idler Assembly 1 7T-0961 7T-0961
1
Bearing 2 9W-4194 9W-4194
Shaft 1 128-9693 154-3308
Collar 2 -- 107-9620
Retainer Assembly 2 142-2803 142-2805
Bolt (5/8") 24 4K-5175 4K-5175
Washer 24 3H-7654 3H-7654
Stabilizer Ring 2 6T-5246 --
Seal -- Duo-Cone Group (Inverted) 2 7T-0157 --
1
Toric Ring 1 8H-2262 --
1
O-Ring 1 6V-2698 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7864
Toric Ring 1 2 -- 162-2168
Seal -- Retainer 2 8F-8733 8F-8733
Seal -- Collar 2 -- 7R-8872
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
2
Mounting Hardware
End Cap (Two Bolt Design, Abutment Style) 2 306-9431 306-9431
Bolt 4 9W-4488 9W-4488
Washer 4 4K-0684 4K-0684
End Cap (Three Bolt Design, Abutment Style) 3 1 306-9447 306-9447
End Cap (Three Bolt Design, Abutment Style) 3 1 306-9449 306-9449
Bolt 6 9W-4488 9W-4488
Washer 6 4K-0684 4K-0684
Wedge (Use with former cap design) 2 109-8014 --
Insert 2 9W-4489 9W-4489
Special Application Idlers
Idler Group (Arctic) 4 -- 245-9947
Seal -- Duo-Cone Group (Inverted) 2 6V-2614 --
1
Toric Ring 1 9M-9730 --
1
O-Ring 1 6V-2698 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7864
Toric Ring 1 2 -- 162-2168
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.
3 Effective serial numbers: 3KR395-UP.

184
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N LANDFILL/SPECIAL APPLICATION IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 167-1946
Components of Group
Idler Assembly 1 7T-0961
1
Bearing 2 9W-4194
Shaft 1 154-3308
Collar 2 261-9674
Retainer Assembly 2 261-9675
Bolt (5/8") 24 8T-4835
Washer 24 8T-4223
Plate 2 166-9445
Seal -- Duo-Cone Group (Symmetric) 2 162-7864
1
Toric Ring 2 162-2168
Seal -- Retainer 2 8F-8733
Seal -- Collar 2 7R-8872
Stopper 1 9G-4872
Plug 1 6Y-0473
2
Mounting Hardware
End Cap (Two Bolt Design, Abutment Style) 2 306-9431
Bolt 4 9W-4488
Washer 4 4K-0684
3
End Cap (Three Bolt Design, Abutment Style) 1 306-9447
End Cap (Three Bolt Design, Abutment Style) 3 1 306-9449
Bolt 6 9W-4488
Washer 6 4K-0684
Insert 2 9W-4489
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.
3 Effective serial numbers: 3KR395-UP.

D10T, D10R, D10N CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group - Single Flange (SF) 2 195-5855 1
2
Mounting Hardware
End Cap 4 6T-4964
Bolt 4 7X-0444
Washer 4 8T-5361
1 Refer to Track Roller Section for component breakdown.
2 These components are not included in the roller group. Quantities shown are required to mount each roller.

185
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R, D10N TRACK ROLLERS

SYMMETRIC DESIGN

EARLY FORMER
PART PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER NUMBER
Double Flange (DF) 8 -- -- 195-5856 1
Single Flange (SF) 8 -- -- 195-5855 1
Components of Group
Roller Shell (DF) 1 6Y-0892 2 6Y-0892 2 195-5854
3 3
Roller Shell (SF) 1 6Y-0891 6Y-0891 195-5853
Bearing 4 2 9W-9499 9W-9499 9W-9499
Shaft 1 146-3584 154-3306 154-3306
Retainer 2 6Y-0893 107-9616 107-9616
Collar 2 -- 107-3947 107-3947
5
Thrust Washer 2 8E-6619 8E-6619 8E-6619
Bolt 12 0S-1595 0S-1595 1A-1460
Washer 12 5P-8245 5P-8245 5P-8245
Stabilizer Ring 2 6T-5247 -- --
Seal -- Duo-Cone Group (Inverted Design) 2 7T-0159 -- --
4
Toric Ring 1 8P-0021 -- --
4
O-Ring 1 6V-2700 -- --
Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863 162-7863
Toric Ring 4 2 -- 162-2167 162-2167
Seal -- Retainer 2 8F-9516 8F-9516 8F-9516
Seal -- Collar 2 -- 107-4057 107-4057
Stopper 1 9G-4872 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473 6Y-0473
6
Mounting Hardware
End Cap (Abutment Style) 7 2 -- 131-1650 131-1650
Bolt 4 6T-1139 6T-1139 6T-1139
Washer 4 3K-5234 3K-5234 3K-5234
Special Application Roller Groups
Double Flange (DF) (Arctic) 8 -- -- 245-9949
Single Flange (SF) (Arctic) 8 -- -- 245-9948
Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863 162-7863
4
Toric Ring 2 -- 162-2167 162-2167
Seal -- Duo-Cone Group (Inverted Design) 2 7T-5125 -- --
Toric Ring 4 1 7T-1093 -- --
4
O-Ring 1 6V-2700 -- --
1 Roller Groups with longer retainer bolts (ref IRM UC01-09), effective serial numbers 3KR1610 & UP.
2 Canceled & replaced by (1) 195-5854 roller shell & (12) 1A-1460 bolts.
3 Canceled & replaced by (1) 195-5853 roller shell & (12) 1A-1460 bolts.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 Use (1) 8P5169 Thrust Washer and (4) 8H4952 Dowels to repair former 6Y0895 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E6619 Thrust Washer. See Special Instruction SEHS8515.
6 These components are not included in the roller group; quantities shown are required to mount each roller.
7 Effective serial numbers: 3KR1111-UP.

186
 Elevated Sprocket Tractors
D10T, D10R, D10N

D10T, D10R FLEXIBLE IDLER WEAR GUARDS

3KR1600-UP, AKT0188-UP

PART
(PER MACHINE) QUANTITY NUMBER
Guard As. Rear (Rubber) 2 147-5331
Guard As. Front (Rubber) 2 147-5332
Plate 4 147-5333
Bolt (5/8 inch) 12 8T-6871
Washer 12 8T-4122
Guard As. Rear Sides 4 147-5330
Bolt (5/8 inch) 12 7X-0344
Washer 12 8T-4122

D10T, D10R, D10N TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 184-4396
Bolt 32 7X-0386
Washer 32 8C-6913

D10T, D10R, D10N BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 7T-5959
Bolt 64 5P-2228
Washer 64 5P-1076

D10T, D10R, D10N CARTRIDGE PINS

10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9309
Pin Assembly (Arctic Applications) 32 251-3273

187
 Elevated Sprocket Tractors
D10

D10 TRACK
POSITIVE PIN RETENTION (PPR) TRACK
84W, 76X
10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 46 Section 2 239-0673
Track Links
RH Pin End Master 1 239-0675
LH Pin End Master 1 239-0676
RH Bushing End Master 1 239-0677
LH Bushing End Master 1 239-0678
RH Regular 45 9W-5933
LH Regular 45 9W-5934
Other Components
Pin 46 6Y-1579
Bushing 46 143-0746
Seal Assembly (Rigid) 92 222-7001
1
Seal Assembly (Rigid) (Post Turn Seal) 92 252-6327
Thrust Ring 92 235-2213 2
Retaining Ring (PPR) 92 6Y-0471
Stopper 46 7G-4332
Plug 46 6Y-0473
3
Track Hardware
Bolt 180 5P-3868
Nut 180 5P-8221
Master Bolt 4 5P-8222
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 239-5272
Seal Set (Post Turn Seal) (92 Seal Assemblies) 1 1 252-6329
4
Post Turn Seal/Thrust Ring Set 1 254-3971
Retaining Ring Group (104 Retaining Rings) 1 9W-4264
Thrust Ring Facing Group 1 239-5509
1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.
2 238-9854 ring assembly contains two facing rings already applied to the 235-2213 thrust ring.
3 Not part of link assembly; required to assemble track group.
4 Contains (92) 252-6327 Post Turn Seals, (92) 235-2213 Thrust Rings.

188
 Elevated Sprocket Tractors
D10

D10 TRACK
NON-POSITIVE PIN RETENTION (NON-PPR) TRACK
84W, 76X
10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 46 Section 2 239-0674
Track Links
RH Pin End Master 1 239-0679
LH Pin End Master 1 239-0680
RH Bushing End Master 1 239-0677
LH Bushing End Master 1 239-0678
RH Regular 45 9W-5723
LH Regular 45 9W-5724
Other Components
Pin 45 6Y-1578
Master Pin 1 6Y-1577
Bushing 46 143-0746
Seal Assembly (Rigid) 92 222-7001
Seal Assembly (Rigid) (Post Turn Seal) 1 92 252-6327
Thrust Ring 92 235-2213
Retaining Ring 2 7G-3431
Stopper 46 7G-4332
Plug 46 6Y-0473
Track Hardware 2
Bolt 180 5P-3868
Nut 180 5P-8221
Master Bolt 4 5P-8222
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 239-5272
1
Seal Set (Post Turn Seal) (92 Seal Assemblies) 1 252-6329
3
Post Turn Seal/Thrust Ring Set 1 254-3971
1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.
2 Not part of link assembly; required to assemble track group.
3 Contains (92) 252-6327 Post Turn Seals, (92) 235-2213 Thrust Rings.

D10 TRACK SHOES

10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Moderate Service 32.0" (810 mm) 9W-5826 9W-1999
Moderate Service 36.0" (915 mm) 9W-5825 9W-2000
Extreme Service 28.0" (710 mm) 9W-4465 9W-1996
Extreme Service 32.0" (810 mm) 9W-5828 9W-1997

189
 Elevated Sprocket Tractors
D10

D10 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 3 157-4293
Sprocket Segment (4 Tooth) 3 102-6683
Bolt 27 5P-5422
Nut Strip 6 115-1145
Washer 27 7X-0612
Nut 1 3 2M-5656
1 To be used with 157-4293 sprocket segment.

D10 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 6Y-0236
Components of Group
Idler Assembly 1 6Y-0216
1
Bearing 2 9W-4195
Shaft 1 138-4330
Retainer Assembly 2 137-3384
Bolt 24 4K-5175
Washer 24 3H-7654
Stabilizer Ring 2 6T-5245
Seal -- Duo-Cone Group 2 302-1516
Toric Ring 1 1 171-5713
1
O-Ring 1 6V-2475
Seal -- Retainer 2 2K-2939
Stopper 1 9G-1368
Plug 1 6Y-0473
2
Mounting Hardware
End Cap 2 3T-1248
Bolt 4 8C-3435
Washer 4 4K-0684
Insert 2 3T-9075
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 6V-2615
Toric Ring 1 1 3P-1847
1
O-Ring 1 6V-2475
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.

190
 Elevated Sprocket Tractors
D10

D10 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 8 3T-9530
Single Flange (SF) 8 7T-1826
Components of Group
Roller Shell (DF) 1 3T-9529
Roller Shell (SF) 1 7T-1825
Bearing 1 2 9W-4194
Shaft 1 8E-6653
Retainer 2 6Y-2508
Thrust Washer 2 2 8E-6644
Bolt 12 0S-1585
Stabilizer Ring 2 6T-5246
Seal -- Duo-Cone Group 2 7T-0157
1
Toric Ring 1 8H-2262
O-Ring 1 1 6V-2698
Seal -- Retainer 2 8F-8733
Stopper 1 9G-5664
Plug 1 6Y-0473
3
Mounting Hardware
End Cap 2 131-1649
Bolt 4 5P-3868
Washer 4 3S-1349
Special Application Roller Groups
Double Flange (DF) (Arctic) 8 3T-9548
Single Flange (SF) (Arctic) 8 7T-2582
Seal -- Duo-Cone Group 2 6V-2614
Toric Ring 1 1 9M-9730
O-Ring 1 1 6V-2698
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 6Y-2507 Thrust Washer and (4) 8H-4952 Dowels to repair former 6Y-2509 Retainer Assembly. DO NOT DRILL AND DOWEL NEW
8E-6644 Thrust Washer. See Special Instruction SEHS8515.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

D10 TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 7T-1158
Bolt 32 1D-4639

191
Elevated Sprocket Tractors
D10

D10 BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 3P-2482
Bolt 40 6K-7917
Bolt 24 5K-7143
Washer 64 5P-8245

D10 CARTRIDGE PINS

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9311
Pin Assembly (Arctic Applications) 32 251-3280

192
 Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N TRACK

4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB
12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 41 Section 2 215-7494 1
Track Links
RH Pin End Master 1 229-3525
LH Pin End Master 1 229-3526
RH Bushing End Master 1 229-3527
LH Bushing End Master 1 229-3528
RH Regular 40 6T-8049
LH Regular 40 6T-8050
Other Components
Pin 41 126-5343
Bushing 41 215-7493 2
Sleeve Bearing 82 215-7492
Seal Assembly (Rigid) 82 222-7007
Seal Assembly (Rigid) (Post Turn Seal) 3 82 261-4338
Thrust Ring 82 256-6084 4
Retaining Ring (PPR) 82 6Y-0472
Stopper 41 7G-4332
Plug 41 6Y-0473
Track Hardware 5
Bolt 160 6T-8853 6
Nut 160 3T-6292
Master Bolt (Long) 2 6T-8520
Master Bolt (Short) 2 6T-8521
Special Sets/Groups
Seal Set (82 Seal Assemblies) 1 248-5531
3
Seal Set (Post Turn Seal) (82 Seal Assemblies) 1 261-4408
Retaining Ring Group (82 Retaining Rings) 1 6Y-1082
7
Thrust Ring Facing Group 1 9W-9621
1 Effective serial numbers: 7PZ00675-UP, AAF00201-UP.
2 Bushing replacement for Non Sleeve Bearing Track order 202-0908 bushing.
3 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.
4 257-8845 ring assembly contains two facing rings already applied to the 256-6084 thrust ring.
5 Not part of link assembly; required to assemble track group.
6 Special coated bolt 135-6961, available for use in high corrosion applications.
7 Contains 335 facing rings to service 2 link assemblies.

193
Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES
PPR TRACK

PART
QUANTITY NUMBER
Link Assembly Used 215-7494
Extreme Service Shoe -- 28" (710 mm) 2 215-7495
Extreme Service Shoe -- 32" (810 mm) 2 249-5288
Extreme Service Shoe -- 36" (915 mm) (Clipped) 2 215-7497
Extreme Service Shoe (ARM) -- 28" (710 mm) 2 242-6373
Extreme Service Shoe (ARM) -- 32" (860 mm) 2 242-6374

194
 Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N TRACK

HIGH ABRASION APPLICATION
4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB
12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 41 Section 2 215-7678
Track Links
RH Pin End Master 1 231-4605
LH Pin End Master 1 231-4606
RH Bushing End Master 1 231-4607
LH Bushing End Master 1 231-4608
RH Regular 40 200-6325
LH Regular 40 200-6326
Other Components
Pin 41 126-5343
Bushing 41 215-7493
Sleeve Bearing 82 215-7492
Seal Assembly (Rigid) 82 222-7007
Seal Assembly (Rigid) (Post Turn Seal) 1 82 261-4338
Thrust Ring 82 256-6084 2
Retaining Ring (PPR) 82 6Y-0472
Stopper 41 7G-4332
Plug 41 6Y-0473
Track Hardware 3
Bolt 160 6T-8853 4
Nut 160 3T-6292
Master Bolt (Long) 2 6T-8520
Master Bolt (Short) 2 6T-8521
Special Sets/Groups
Seal Set (82 Seal Assemblies) 1 248-5531
1
Seal Set (Post Turn Seal) (82 Assemblies) 1 261-4408
Retaining Ring Group (82 Retaining Rings) 1 6Y-1082
5
Thrust Ring Facing Group 1 9W-9621
1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.
2 257-8845 ring assembly contains two facing rings already applied to the 256-6084 thrust ring.
3 Not part of link assembly; required to assemble track group.
4 Special coated bolt 135-6961, available for use in high corrosion applications.
5 Contains 335 facing rings to service 2 link assemblies.

195
Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N TRACK SHOES

12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 28.0" (710 mm) 153-4874 153-4875
Extreme Service 32.0" (810 mm) 229-1525 153-4878
Extreme Service (Clipped Grouser) 36.0" (915 mm) 153-4963 153-4962
Extreme Service (ARM) 28.0" (710 mm) 231-0160 231-0161
Extreme Service (ARM) 32.0" (810 mm) 209-4537 209-4538
Extreme Service (Clipped Grouser) (ARM) 36.0" (915 mm) 208-5323 208-5324
Extreme Service (Trapezoidal Opening) 28.0" (710mm) 221-8170 221-8177
Extreme Service (Trapezoidal Opening) 32.0" (810 mm) 249-6630 221-8178
Extreme Service (Trapezoidal Opening) (Clipped Grouser) 36.0" (915 mm) 221-8176 221-8180

D11T, D11R, D11N SPROCKETS

PART
(PER SIDE ) QUANTITY NUMBER
Sprocket Segment (6 Tooth) 3 231-9486
Sprocket Segment (5 Tooth) 1 231-9484
Bolt 32 7T-1243
Nut 32 3S-1356
Washer 32 3S-1349

196
 Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N IDLERS

WITH 5/8" RETAINER MTG BOLT

EARLY FORMER
PART PART PART
(PER MACHINE) QUANTITY NUMBER NUMBER NUMBER
Group 4 -- -- 187-1484 1
Components of Group
Idler Assembly 1 -- 2 -- 2 187-1011
3
Bearing 2 258-4614 258-4614 258-4614
Shaft 1 138-4331 156-5351 156-5351
Collar 2 -- 156-4653 156-4653
4
Retainer Assembly 2 146-5126 156-8357 188-1452
Bolt (5/8") 24 7B-1115 7B-1115 031-3185
Washer 24 5P-8247 5P-8247 5P-8247
Stabilizer Ring 2 6T-5245 -- --
Seal -- Duo-Cone Group (Symmetric) 2 -- 155-9879 155-9879
Toric Ring 3 2 -- 160-6631 160-6631
Seal -- Duo-Cone Group (Inverted) 2 7T-0160 -- --
Toric Ring 3 1 6H-1309 -- --
3
O-Ring 1 6V-2475 -- --
Seal -- Retainer 2 2K-2939 2K-2939 2K-2939
Seal -- Collar 2 -- 3K-0715 3K-0715
Stopper 1 9G-1368 9G-1368 9G-1368
Plug 1 6Y-0473 6Y-0473 6Y-0473
5
Mounting Hardware
End Cap (Two Bolt Design, Abutment Style) 6 2 306-9433 306-9433 306-9433
Bolt 4 8T-5881 8T-5881 8T-5881
Washer 4 7D-5238 7D-5238 7D-5238
End Cap (Three Bolt Design, Abutment Style) 6 1 306-9451 306-9451 306-9451
End Cap (Three Bolt Design, Abutment Style) 6 1 306-9453 306-9453 306-9453
Bolt 6 8T-5881 8T-5881 8T-5881
Washer 6 7D-5238 7D-5238 7D-5238
Insert 2 3T-9075 3T-9075 3T-9075
Special Application Idler Group
Idler Group (Arctic) 4 -- -- 245-9950
Seal -- Duo-Cone Group (Symmetric) 2 -- 155-9879 155-9879
Toric Ring 3 2 -- 160-6631 160-6631
Seal -- Duo-Cone Group (Inverted) 2 6V-2615 -- --
3
Toric Ring 1 3P-1847 -- --
O-Ring 3 1 6V-2475 -- --
1 Idler with longer retainer bolts (Ref IRM UC 01-05). Effective serial numbers 7PZ00388 and AAF00139.
2 Idler Assembly 148-3730 canceled and replaced by: (1) Idler Assembly 187-1011, (2) Retainer Assembly 188-1452, (24) Bolts 031-3185
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 Retainer Assembly and 1/2" hardware to be used with idler assembly 9W-9650; (2) Retainer Assembly 137-3384, (24) Bolts 4K-5175, (24)
Washers 3H-7654.
5 These components are not included in the idler group; quantities shown are required to mount each idler.
6 Effective serial numbers: 4HK624-UP.

197
 Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group - Single Flange (SF) 2 184-6305 1
Mounting Hardware (New Design) 2
End Cap 2 309-9435
Block 2 224-5918
Bolt 4 9W-7269
Washer 4 4K-0684
2
Mounting Hardware (Former Design)
End Cap 4 9W-7267
Bolt 4 7X-0434
Washer 4 7X-0533
1 Refer to Track Roller Section for component breakdown.
2 These components are not included in the roller group. Quantities shown are required to mount each roller.

198
 Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R, D11N TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 8 184-6306 1
Single Flange (SF) 8 184-6305 1
Single Flange (SF) (High Abrasion Applications) 2 16 200-5701
Components of Group
Roller Shell (DF) 1 186-5318
Roller Shell (SF) 1 186-5319
Roller Shell (SF) (High Abrasion Applications) 1 200-5702
3
Bearing 2 9W-4194
Shaft 1 155-2048
Retainer 2 180-4995
Collar 2 184-2607
Thrust Washer 2 8E-6644
Bolt 12 031-1382
Washer 12 5P-8247
Seal -- Duo-Cone Group (Symmetric) 2 162-7864
3
Toric Ring 2 162-2168
Seal -- Retainer 2 8F-8733
Seal -- Collar 2 7R-8872
Stopper 1 9G-4872
Plug 1 6Y-0473
4
Mounting Hardware (D11T) (Three Bolt Design)
End Cap (Three Bolt Design, Abutment Style) 1 306-9455
End Cap (Three Bolt Design, Abutment Style) 1 306-9457
Bolt 6 9W-7269
Washer 6 4K-0684
4
Mounting Hardware (D11R/N) (Two Bolt Design)
End Cap (Two Bolt Design, Abutment Style) 5 2 306-9435
Bolt 4 9W-7269
Washer 4 4K-0684
Special Application Roller Groups
Double Flange (DF) (Arctic) 8 245-9952
Single Flange (SF) (Arctic) 8 245-9951
Seal -- Duo-Cone Group 2 162-7864
3
Toric Ring 2 162-2168
1 Effective serial numbers: 7PZ298-UP, AAF133-UP. Also refer to Service Magazine dated 02/14/00 for servicing former roller groups.
2 To be used with 215-7678 Link Assembly
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.
5 Effective serial numbers: AAF0188-UP & 7PZ0581-UP.

199
Elevated Sprocket Tractors
D11T, D11R, D11N

D11T, D11R IDLER GUARDS

7PZ1-UP, 9TR352-UP, 9XR165-UP, AAF1-UP

PART
(PER MACHINE) QUANTITY NUMBER
Standard Guard (Front Idlers Only)
Cover 2 162-8438
Bolt 10 7X-0345
Attachment Guards
Flexible Guard Assembly - Rear 2 139-2016
Plate 2 139-2011
Bolt (Use with one piece solid design) 6 7X-0350
Bolt (Use with three finger split design) 6 8T-6871
Washer 6 8T-4122
Side Guard Assembly - Rear 4 139-2015
Bolt 12 7X-0345
Washer 12 8T-4122
Flexible Guard Assembly - Front 2 139-2019
Plate 2 139-2011
Bolt 6 8T-6871
Washer 6 8T-4122

D11T, D11R, D11N TRACK GUIDES

PART
(PER MACHINE) QUANTITY NUMBER
Guide 16 187-3298
Bolt 32 8T-8927
Washer 32 8T-5361

D11T, D11R, D11N BOGIE PADS

PART
(PER MACHINE) QUANTITY NUMBER
Bogie Pad Assembly 16 3P-2482
Bolt 64 5P-2228
Washer 64 5P-1076

D11T, D11R, D11N CARTRIDGE PINS

PART
(PER MACHINE) QUANTITY NUMBER
Pin Assembly 32 7T-9311
Pin Assembly (Arctic Applications) 32 251-3280

200
 Skidders
INDEX

Skidders
MODELS PAGE NO.

517.......................................................................................................................... 202
527.......................................................................................................................... 208
D4H......................................................................................................................... 216
D5H......................................................................................................................... 226

201
 Skidders
517

517 HEAVY DUTY SEALED AND LUBRICATED TRACK

5WW1-UP, 6PW1-UP
7.50" (190.5 mm) PITCH -- 3/4" BOLT

7 8
PART Roller Frame Roller Frame
NUMBER 42 Section 44 Section
Link Assembly (Quantity 2) 106-1638 148-2465
Components of Link Assembly
Track Links
RH Pin End Master 106-1627 1 1
LH Pin End Master 106-1628 1 1
RH Bushing End Master 106-1629 1 1
LH Bushing End Master 106-1630 1 1
RH Regular 106-1625 41 43
LH Regular 106-1626 41 43
Other Components
Pin 179-0126 42 44
Bushing 106-1618 42 44
Seal Assembly (Rigid) 250-3988 84 88
Thrust Ring 152-8070 84 88
Stopper 5G-2247 42 44
Plug 6Y-0473 42 44
Track Hardware 1
Bolt 6V-1792 164 172
Nut 1S-1860 164 172
Master Bolt 106-1642 2 2
Master Bolt 107-0719 2 2
Special Sets/Groups
Seal Set (92 Seal Assemblies) 252-7855 1 1
Bushing and Seal Group (37 Sections) 115-2439 1 1
1 Not part of link assembly; required to assemble track group.

202
 Skidders
517

517 HEAVY DUTY TRI-LINK TRACK

7.50" (190.5 mm) PITCH -- 3/4" BOLT

7 8
PART Roller Frame Roller Frame
NUMBER 42 Section 44 Section
Link Assembly -- 44 Section 106-1638 148-2465
Track Links
RH Pin End Master 106-1627 11 11
LH Pin End Master 106-1628 12 12
RH Bushing End Master 106-1629 11 11
2
LH Bushing End Master 106-1630 1 12
RH Regular 106-1625 43 1 43 1
2
LH Regular 106-1626 43 43 2
Other Components
Stub Pin 106-1610 44 44
Stub Bushing 107-0720 44 44
3
Track Hardware (per side: Tri - 1 center chain & 1 outrigger)
Bolt 6V-1792 258 258
Nut 1S-1860 258 258
Master Bolt 106-1642 3 3
Master Bolt 107-0719 3 3
1 Required for right hand outrigger chain.
2 Required for left hand outrigger chain.
3 Not part of link assembly; required to assemble track group.

517 TRACK SHOES

7.50" (190.5 mm) PITCH -- 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Moderate Service 22" (560 mm) 106-1607 106-1613
Moderate Service 24" (610 mm) 117-0615 117-0616
Moderate Service (Tri) (RH) 26" (660 mm) 148-2487 148-2594
Moderate Service (Tri) (LH) 26" (660 mm) 148-2494 148-2596
Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 163-2922 163-2923
Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 163-2924 163-2925

517 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 3 106-1622
Sprocket Segment (4 Tooth) 2 106-1624
Bolt 23 6V-0937
Nut 23 7H-3607
Washer 23 2S-5658

203
 Skidders
517

517 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 8E-4007
Components of Group
Idler Assembly 1 8E-4008
1
Bearing 2 9P-2245
Shaft 1 8E-4017
Retainer 2 9G-9349
Thrust Washer 2 106-7691
Bolt 24 0S-1594
Washer 24 5M-2894
Stabilizer Ring 2 6T-4871
Seal -- Duo-Cone Group 2 7T-0158
1
Toric Ring 1 6P-8912
1
O-Ring 1 6V-2701
Seal -- O-Ring 2 2H-3928
Stopper 1 9G-5664
Plug 1 6Y-0473
2
Mounting Hardware
End Cap 2 149-1056
Block 2 149-1054
Bolt (20 mm) 4 8T-0655
Washer 4 8T-3282
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Not part of idler group; quantities required to mount each idler.

204
 Skidders
517

517 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) -1 149-1051
Single Flange (SF) 8 149-1050
Components of Group
Roller Shell (DF) 1 121-0828
Roller Shell (SF) 1 121-0825
Bushing Assembly 2 121-0834
2
Bearing 1 8P-6652
Shaft 1 131-8742
End Collar 2 149-1049
Ring (Retaining-Snap) 2 121-1257
Ring (Lock) 2 6H-7382
Seal - Duo-Cone Group 2 9W-5224
2
Toric Ring 2 1M-3097
Seal - Bushing O-Ring 2 1H-6227
Seal - Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
Bolt (20 mm) 4 6V-3669
Washer 4 8T-3282
1 517 with 7 track rollers - SDSDSDS - Requires 6 DF; 517 with 8 track rollers - SDSDDSDS - Requires 8 DF.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

205
 Skidders
517

517 END GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 1 150-1989
Guard Assembly 1 150-1990
Wear Strip 1 8Y-1198
Wear Strip 1 8Y-1199
Bolt (1/2") 6 5P-2228
Washer (1/2") 6 8T-4223
Rear (Lower)
Guard Assembly 1 147-6879
Guard Assembly 1 147-6880
Wear Strip 1 8Y-1198
Wear Strip 1 8Y-1199
Bolt (1/2") 6 5P-2228
Washer (1/2") 6 8T-4223
Rear (Upper)
Guard Assembly 1 107-2644
Guard Assembly 1 107-2645
Wear Strip 2 9N-4733
Bolt (1/2") 4 5P-2228
Washer (1/2") 4 8T-4223

517 TRACK ROLLER GUARDS (FULL LENGTH)

7 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 155-8399
Guard 4 155-8400
Bolt - Mounting (20 mm) 24 6V-3531
Washer (Mounting) 24 8T-3282
Spacer (Cross-Tube) 12 151-0926
Bolt - Cross-Tube Spacer (1") 12 6J-4081
Nut (1") 12 2J-3507
Plate 4 134-6093
Bolt (1/2") 8 8T-8917
Washer 8 8T-4223
1
Bar 8 6G-0712
Bar 1 8 9W-5449
Bar 1 4 127-0103
1 For use in severe skidding application. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

206
 Skidders
517

517 TRACK ROLLER GUARDS (FULL LENGTH)

8 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 151-0924
Guard 4 151-0925
Bolt - Mounting (20 mm) 28 6V-3531
Washer (Mounting) 28 8T-3282
Spacer (Cross-Tube) 14 151-0926
Bolt - Cross-Tube Spacer (1") 14 6J-4081
Nut (1") 14 2J-3507
Plate 4 134-6093
Bolt (1/2") 8 8T-8917
Washer 8 8T-4223
Bar 1 8 6G-0712
Bar 1 8 9W-5449
1
Bar 4 127-0103
1 For use in severe skidding application. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

207
 Skidders
527

527 HEAVY DUTY SEALED AND LUBRICATED TRACK

7 ROLLER FRAME: 2RS, 3DS, 4NS
8 ROLLER FRAME: 4NS
8.00" (203.2 mm) PITCH -- 3/4" BOLT

7 8
PART Roller Frame Roller Frame
NUMBER 41 Section 43 Section
Link Assembly (Quantity 2) 6I-9671 146-0020
Components of Link Assembly
Track Links
RH Pin End Master 8E-7407 1 1
LH Pin End Master 8E-7408 1 1
RH Bushing End Master 8E-7409 1 1
LH Bushing End Master 8E-7410 1 1
RH Regular 8E-7405 40 42
LH Regular 8E-7406 40 42
Other Components
Pin 160-7820 1 41 42
Bushing 8E-7222 41 42
Seal Assembly (Rigid) 207-0544 82 86
Thrust Ring 152-8071 82 86
Stopper 5G-2247 41 42
Plug 6Y-0473 41 42
2
Track Hardware
Bolt 6V-1792 160 168
Nut 1S-1860 160 168
Master Bolt 9S-1838 4 4
Special Sets/Groups
Seal Set (92 Seal Assemblies) 256-9360 1 1
Bushing and Seal Group (37 Sections) 115-2440 1 1
1 Former pin 8E-7720 (Use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group.

208
 Skidders
527

527 HEAVY DUTY SEALED AND LUBRICATED TRACK

SUPER STEPPED BUSHING, 7 ROLLER FRAME
2RS, 3DS, BDW
8.00" (203.2 mm) PITCH - 3/4" BOLT
NOT FOR NACD USE

PART
QUANTITY NUMBER
Link Assembly -- 41 Section 2 205-1768
Components of Link Assembly
Track Links
RH Pin End Master 1 8E-7407
LH Pin End Master 1 8E-7408
RH Bushing End Master 1 8E-7409
LH Bushing End Master 1 8E-7410
RH Regular 40 8E-7405
LH Regular 40 8E-7406
Other Components
Pin 41 160-7820 1
Bushing 41 203-0306
Seal Assembly (Rigid) 82 207-0544
Thrust Ring 82 152-8071
Stopper 41 5G-2247
Plug 41 6Y-0473
2
Track Hardware
Bolt 160 6V-1792
Nut 160 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 256-9360
1 Former pin 8E-7720 (Use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group.

209
 Skidders
527

527 HEAVY DUTY TRI-LINK TRACK

8.00" (203.2 mm) PITCH -- 3/4" BOLT

7 8
PART Roller Frame Roller Frame
NUMBER 41 Section 43 Section
Link Assembly (Quantity 2) 6I-9671 146-0020
Track Links
RH Pin End Master 8E-7407 11 11
LH Pin End Master 8E-7408 12 12
RH Bushing End Master 8E-7409 11 11
2
LH Bushing End Master 8E-7410 1 12
RH Regular 8E-7405 40 1 42 1
2
LH Regular 8E-7406 40 42 2
Other Components
Stub Pin 106-8237 41 43
Stub Bushing 106-8235 41 43
3
Track Hardware (Per side: Tri - 1 center chain & 1 outrigger)
Bolt 6V-1792 240 252
Nut 1S-1860 240 252
Master Bolt 9S-1838 6 6
1 Required for right hand outrigger chain.
2 Required for left hand outrigger chain.
3 Not part of link assembly; required to assemble track group.

527 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service (Clipped Grouser) 23" (585 mm) 203-6580 203-7987
Moderate Service 22" (560 mm) 6Y-6286 6Y-6294
Moderate Service 24" (610 mm) 6Y-6287 6Y-6296
Moderate Service (Tri) (RH) 26" (660 mm) 133-0248 133-0246
Moderate Service (Tri) (LH) 26" (660 mm) 133-0249 133-0247
Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 133-0252 133-0250
Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 133-0253 133-0251

527 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 173-0946
Bolt 25 6V-0937
Nut 25 7H-3607
Washer 25 2S-5658

210
 Skidders
527

527 SPROCKETS
USE WITH SUPER STEPPED BUSHING LINK ASSEMBLY

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 202-2404
Bolt 25 6V-0937
Nut 25 7H-3607
Washer 25 2S-5658

211
 Skidders
527

527 IDLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Group (Small Diameter - 545 mm) 4 -- 206-2087 1
Components of Group
Idler Assembly 1 202-4295 1 202-4295 1
Bearing 2 1 9P-2245 9P-2245
Shaft 1 138-1725 160-9359
Collar 1 -- 107-3945
Retainer 2 9G-9349 149-2495
Thrust Washer 3 2 106-7691 106-7691
Bolt 24 0S-1594 1T-0765
Washer 24 5M-2894 5M-2894
Stabilizer Ring 2 6T-4871 --
Seal - Duo-Cone Group (Inverted Seal) 2 7T-0158 --
2
Toric Ring 1 6P-8912 --
O-Ring 2 1 6V-2701 --
Seal - Duo-Cone Group (Symmetric Seal) 2 -- 162-7862
Toric Ring 2 1 -- 162-2166
Seal - Retainer 2 2H-3928 2H-3928
Seal - Collar 2 -- 7J-2036
Stopper 1 9G-5664 9G-5664
Plug 1 6Y-0473 6Y-0473
4
Mounting Hardware (Per Idler)
End Cap (Abutment Style) 1 152-3421 152-3421
Block 1 165-6946 165-6946
Block/Cap 5 1 138-1726 138-1726
Bolt (20 mm) 4 6V-9167 6V-9167
Washer (20 mm) 4 8T-3282 8T-3282
Bolt (20 mm) 6 1 6V-3531 6V-3531
Washer (20 mm) 6 1 6C-9149 6C-9149
Special Application Seals
Seal - Duo-Cone Group 2 7T-4722 --
2
Toric Ring 1 7T-1094 --
O-Ring 2 1 8T-2272 --
1 With Increased Tread Wear Material.
2 Component of preceding assembly or group; quantities shown are per assembly or group.
3 Use (1) Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691
Thrust Washer. See Special Instruction SEHS8515.
4 These components are not part of Idler Group; quantities required to mount each idler.
5 Bolts to end of idler shaft.
6 Required to secure shaft to special 138-1726 Block/Cap.

212
 Skidders
527

527 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) -1 243-5325
Single Flange (SF) 8 231-3093
2
Tall Flange Double Flange (TFDF) - -- 3
Components of Group
Roller Shell (DF) 1 120-5767 4
Roller Shell (SF) 1 120-5753 5
Roller Shell (TFDF) 1 120-5804
Bushing Assembly 2 116-6698
Bearing 6 1 8P-5197
7
Shaft 1 138-1721
End Collar 2 120-5785
Ring (Retaining-Snap) 2 117-9748
Ring (Lock) 2 5M-4443
Seal - Duo-Cone Group 2 171-5882
Toric Ring 6 2 162-2166
Seal - Bushing O-Ring 2 2H-3928
Seal - Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 8
Dowel 7 8K-0589
Bolt (20 mm) 4 6V-5845
Washer (20 mm) 4 8T-3282
Special Application Seals
Seal - Duo-Cone Group (Steel Mill) 2 4S-8984
6
Toric Ring 2 9M-9730
1 527 Grapple with 7 rollers - SDSDSDS - requires 6 DF; 527 Grapple with 8 rollers - SDSDDSDS - requires 8 DF.
2 Optional DF roller for guiding; use quantity required for standard DF.
3 To equip with tall flange rollers, standard tall flange roller groups must be reworked with special 138-1721 shaft.
4 Serviced Replaced By 243-5325 Double Flange Roller Group.
5 Serviced Replaced By 231-3093 Single Flange Roller Group.
6 Component of previous assembly or group; quantity shown is per assembly or group.
7 Use dowel to secure shaft to track roller frame.
8 These components are not included in the roller group; quantities shown are required to mount each roller.

213
 Skidders
527

527 END GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 130-7790
Guard Assembly 2 130-7791
Wear Strip 2 6Y-6382
Wear Strip 2 6Y-6383
Bolt (1/2") 12 5P-2228
Washer (1/2") 12 8T-4223
Rear (Lower)
Guard Assembly 2 130-7788
Guard Assembly 2 130-7789
Wear Strip 2 6Y-6382
Wear Strip 2 6Y-6383
Bolt (1/2") 12 5P-2228
Washer (1/2") 12 8T-4223
Rear (Upper)
Guard Assembly 2 130-7786
Guard Assembly 2 130-7787
Wear Strip 4 130-7794
Bolt (1/2") 8 5P-2228
Washer (1/2") 8 8T-4223

527 TRACK ROLLER GUARDS (FULL LENGTH)

7 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 134-6091
Guard 4 134-6092
Bolt - Mounting (20 mm) 24 6V-3531
Washer (Mounting) 24 8T-3282
Spacer (Cross-Tube) 12 134-6094
Bolt - Cross-Tube Spacer (1") 12 6M-2001
Nut (1") 12 2J-3507
Plate 4 134-6093
Bolt (1/2") 8 8T-8917
Washer 8 8T-4223
1
Bar 8 6G-0712
Bar 1 8 9W-5449
Bar 1 4 127-0103
1 For use in severe skidding applications. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

214
 Skidders
527

527 TRACK ROLLER GUARDS (FULL LENGTH)

8 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Guard 4 148-2720
Guard 4 148-2721
Bolt - Mounting (20 mm) 28 6V-3531
Washer (Mounting) 28 8T-3282
Spacer (Cross-Tube) 14 134-6094
Bolt - Cross-Tube Spacer (1") 14 6M-2001
Nut (1") 14 2J-3507
Plate 4 134-6093
Bolt (1/2") 8 8T-8917
Washer 8 8T-4223
Bar 1 8 6G-0712
Bar 1 8 9W-5449
1
Bar 4 127-0103
1 For use in severe skidding applications. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

215
 Skidders
D4H

D4H TSK HEAVY DUTY SEALED AND LUBRICATED TRACK 1

7PK147-UP
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 44 Section 2 108-0954
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master 1 108-0951
LH Bushing End Master 1 108-0952
RH Regular 43 108-0947
LH Regular 43 108-0948
Other Components
Pin 44 108-0943
Bushing 44 108-0944
Seal Assembly (Rigid) 88 250-3992
Thrust Ring 88 152-8069
Stopper 44 5G-2247
Plug 44 6Y-0473
2
Track Hardware
Bolt (Grouser shoe) 172 9G-3110
Nut 172 1M-1408
Master Bolt (Grouser Shoe) 2 9G-8592
Master Bolt (Grouser Shoe) 2 3T-8601
Master Bolt (Self-Cleaning Shoe) 2 9G-8592
Master Bolt (Self-Cleaning Shoe) 2 3T-3889
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 252-7856
Bushing and Seal Group (39 Sections) 1 115-2438
1 When installing Heavy Duty Track on existing machines (7PK1-146,8ZF,9DB) refer to IRM UC94-18 for installation for guarding information. Also
refer to Special Instruction SEHS9805 for additional guarding information.
2 Not part of link assembly; required to assemble track group.

216
 Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK

7PK1-146, 8ZF1-UP, 9DB1-UP
6.75" (171.5 mm) PITCH -- 5/8" BOLT

FORMER PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 44 Section 2 -- 228-2744
Track Links
RH Pin End Master 1 9G-8583 6Y-9263
LH Pin End Master 1 9G-8584 6Y-9264
RH Bushing End Master 1 9G-8585 9G-8585
LH Bushing End Master 1 9G-8586 9G-8586
RH Regular 43 9G-8581 6Y-9261
LH Regular 43 9G-8582 6Y-9262
Other Components
Pin 44 154-3664 160-7816
Bushing 44 224-3959 224-3959
Seal Assembly 88 3T-5634 250-4000 1
Thrust Ring 88 9G-8591 6Y-6486
Stopper 44 5G-2247 5G-2247
Plug 44 6Y-0473 6Y-0473
2
Track Hardware
Bolt (Grouser shoe) 172 9G-3110 9G-3110
Nut 172 1M-1408 1M-1408
Master Bolt (Grouser Shoe) 2 9G-8592 9G-8592
Master Bolt (Grouser Shoe) 2 3T-8601 3T-8601
Master Bolt (Self-Cleaning Shoe) 2 9G-8592 9G-8592
Master Bolt (Self-Cleaning Shoe) 2 3T-3889 3T-3889
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 -- 252-7860
Bushing and Seal Group (39 Sections) 1 6Y-3879 227-9954
1 Rigid seal assembly.
2 Not part of link assembly; required to assemble track group.

217
 Skidders
D4H

D4H TSK HEAVY DUTY TRI/QUAD TRACK

7PK147-UP
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUAD TRACK TRI TRACK PART

QUANTITY QUANTITY NUMBER
Link Assembly -- 44 Section 2 2 108-0954 1
Track Links
RH Regular 44 44 2 108-0947
3
LH Regular 44 44 108-0948
Other Components
Stub Pin 88 44 108-2639
Stub Bushing 88 44 108-2640
Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri
-- 1 center chain & 1 outrigger) 4
Bolt 344 258 9G-3110
Nut 344 258 1M-1408
Master Bolt 4 3 9G-8592
Master Bolt 4 3 3T-8601
1 Refer to Heavy Duty Track section for component information. For more information about Quad or Tri Link track, refer to IRM 91-18 and special
instruction SEHS8881.
2 Required for right hand outrigger chain.
3 Required for left hand outrigger chain.
4 Not part of link assembly; required to assemble track group.

D4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRI/QUAD TRACK
7PK1-146, 8ZF1-UP, 9DB1-UP
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUAD TRACK TRI TRACK PART

QUANTITY QUANTITY NUMBER
Link Assembly -- 44 Section 2 2 228-2744 1
Track Links
RH Regular 44 44 2 6Y-9261
LH Regular 44 44 3 6Y-9262
Other Components
Stub Pin 88 44 6Y-9474
Stub Bushing 88 44 9W-7939
Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri
-- 1 center chain & 1 outrigger) 4
Bolt 344 258 9G-3110
Nut 344 258 1M-1408
Master Bolt 4 3 9G-8592
Master Bolt 4 3 3T-8601
1 For additional information about Quad and Tri Link Tracks refer to IRM UC91-18 and Special Instruction SEHS8881.
2 Required for right hand outringger chain.
3 Required for left hand outringger chain.
4 Not part of link assembly; required to assemble track group.

218
 Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER
Extreme Service 18" (460 mm) 6Y-5624
Quad (MS) 23" (585 mm) 9W-7984
Quad (MS) 30" (760 mm) 9W-8326
Tri Offset RH (ES) 18" (460 mm) 8E-8526
Tri Offset LH (ES) 18" (460 mm) 8E-8527
Offset RH (MS) 22" (560 mm) 1Q-4631
Offset LH (MS) 22" (560 mm) 1Q-4632

D4H TSK, D4H CUSTOM SKIDDER SPROCKETS

HEAVY DUTY / SEALED LUBRICATED TRACK

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 108-0946
Bolt 20 3S-8182
Nut 20 7H-3607
Washer 20 6V-4316

219
 Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER IDLERS

SMALL DIAMETER

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 4 -- 190-1534 1
Components of Group
Idler Assembly 1 190-1536 2 190-1536 2
Bearing 3 2 8P-7002 8P-7002
Shaft 1 6T-2620 160-9757
Collar 2 -- 160-9756
Retainer 2 6T-2619 160-9761
Thrust Washer 2 137-9518 137-9518
4
Bolt 12 053-2294 053-2294 4
Washer 12 5M-2894 5M-2894
Stabilizer Ring 2 7T-4030 --
Seal -- Duo-Cone Group (Inverted) 2 7T-4080 --
3
Toric Ring 1 8P-7003 --
O-Ring 3 1 6V-2699 --
Seal -- Duo-Cone Group (Symmetric) 2 -- 161-7247
Toric Ring 5 2 -- 161-7249
Seal -- Retainer 2 2H-4145 2H-4145
Seal -- Collar 2 -- 5K-0216
Stopper 1 3T-9536 3T-9536
Plug 1 6Y-0473 6Y-0473
6
Mounting Hardware
End Cap 2 9N-4683 9N-4683
Block 2 9N-4680 9N-4680
Bolt (5/8") 4 1A-8651 1A-8651
Washer 4 5P-8247 5P-8247
Special Application Seals
Seal -- Duo-Cone Group 2 7T-4086 --
5
Toric Ring 1 7T-4087 --
5
O-Ring 1 6V-2699 --
1 With Increase Tread Wear Material.
2 With Increased Tread Wear Material.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 Use 0S-1594 bolt with former idler assembly 7T-4399.
5 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
6 These components are not included in the idler group; quantities shown are required to mount each idler.

220
 Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 6 124-8240
Single Flange (SF) Roller Group 8 124-8237
1
Double Flange (DF, Tall Flange) Roller Group - 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 1 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
Ring (Retaining-Snap) 2 6V-6768
Ring (Lock) 2 6H-7382
End Collar 2 132-1951
Seal -- Duo-Cone Group (Symmetrical) 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
Bolt (5/8") 4 1A-8537
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal - Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
1 Optional DF roller for guiding; use quantity required for specific roller frame type.
2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

221
 Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Double Flange (DF) Roller Group 6 --
Single Flange (SF) Roller Group 8 --
Components of Group
Roller Shell (DF) 1 7G-4832
Roller Shell (SF) 1 7G-4833
Bearing 1 2 8P-7002
Shaft 1 8E-6573
Retainer Assembly 2 3T-9538
Thrust Washer 2 1 9G-9351
Dowel 2 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group (Inverted) 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer O-Ring 2 1H-6227
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
End Cap 2 7G-4829
Bolt (5/8") 4 1B-4367
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
1
Toric Ring 1 7T-4087
O-Ring 1 1 6V-2699
1 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
2 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

222
 Skidders
D4H

D4H TSK END GUIDING GUARDS

HEAVY DUTY TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 108-3297
Guard Assembly 2 108-3298
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 109-1708
Strip 4 109-1709
Rear (Lower)
Guard Assembly 2 108-3302
Guard Assembly 2 108-3303
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 6Y-6382
Strip 4 6Y-6383
Rear (Upper)
Guard Assembly 2 107-2644
Guard Assembly 2 107-2645
Bolt 8 5P-2228
Washer 8 8T-4223
Strip 4 9N-4733

223
Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER END GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 9N-4736
Guard Assembly 2 9N-4737
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 6Y-6380
Strip 2 6Y-6381
Rear (Lower)
Guard Assembly 2 9N-4743
Guard Assembly 2 9N-4742
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 6Y-6382
Strip 2 6Y-6383
Rear (Upper)
Guard Assembly 2 9N-4741
Guard Assembly 2 9N-4740
Bolt 8 5P-2228
Washer 8 8T-4223
Strip 4 9N-4733

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLER GUARDS (FULL LENGTH)
SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

Order cast guards from Spokan Industries (Phone: 1-800-541-3601)

224
 Skidders
D4H

D4H TSK, D4H CUSTOM SKIDDER CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6Y-9934
Bolt 4 5P-4625
Bolt 8 8T-8924
Bolt 16 7X-3328
Washer 8 8T-4122
Washer 16 8T-4223
Lock Nut 4 3K-2889
Tube 4 8V-4772
Bar 4 6Y-9935
Spacer 8 6K-5640

D4H TSK CENTER GUIDING GUARDS

HEAVY DUTY TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4022
Bolt 8 8T-8924
Spacer 8 6K-5640

225
 Skidders
D5H

D5H TSK HEAVY DUTY SEALED AND LUBRICATED TRACK 1

7EG1113-UP
7.50" (190.5 mm) PITCH -- 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 42 Section 2 106-1638
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 41 106-1625
LH Regular 41 106-1626
Other Components
Pin 42 179-0126
Bushing 42 106-1618
Seal Assembly (Rigid) 84 250-3988
Thrust Ring 84 152-8070
Stopper 42 5G-2247
Plug 42 6Y-0473
2
Track Hardware
Bolt (Grouser shoe) 164 6V-1792
Nut 164 1S-1860
Master Bolt (Grouser Shoe) 2 107-0719
Master Bolt (Grouser Shoe) 2 106-1642
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 252-7855
Bushing and Seal Group (37 Sections) 1 115-2439
1 When installing Heavy Duty Track on existing machines (4KD,7EG1-1112) refer to IRMs UC93-21 and UC94-17. Master shoe required with
heavy duty track. Also refer to Special Instruction SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
2 Not part of link assembly; required to assemble track group.

226
 Skidders
D5H

D5H TSK, D5H CUSTOM SKIDDER HYBRID TRACK

4KD1-UP, 7EG1-1112
7.50" (190.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 42 Section 2 238-6929
Track Links
RH Pin End Master 1 244-6571
LH Pin End Master 1 244-6572
RH Bushing End Master 1 244-6573
LH Bushing End Master 1 244-6574
RH Regular 41 229-6909
LH Regular 41 229-6910
Other Components
Pin 42 160-7818 1
Bushing 42 229-6915
Seal Assembly 84 250-3988 2
Thrust Ring 84 6Y-6481
Stopper 42 5G-2247
Plug 42 6Y-0473
3
Track Hardware
Bolt 164 9G-3110
Nut 164 1M-1408
Master Bolt (Grouser Shoe) 2 3T-8580
Master Bolt (Grouser Shoe) 2 3T-8601
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 252-7855
Bushing and Seal Group (37 Sections) 1 293-9146
1 Former pin 3P-3880 (Use 9G-1642 stopper).
2 Rigid seal.
3 Not part of link assembly; required to assemble track group.

227
 Skidders
D5H

D5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK

4KD1-UP, 7EG1-1112
7.50" (190.5 mm) PITCH -- 5/8" BOLT

FORMER PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 42 Section 2 -- 6Y-5413 1
Track Links
RH Pin End Master 1 -- 8E-0885
LH Pin End Master 1 -- 8E-0886
RH Bushing End Master 1 -- 8E-0887
LH Bushing End Master 1 -- 8E-0888
RH Regular 41 3T-8405 6Y-9267
LH Regular 41 3T-8406 6Y-9268
Other Components
Pin 42 160-7818 2 160-7818 2
Bushing 42 6Y-0929 6Y-0929
Seal Assembly 84 3T-5631 250-3988 3
Thrust Ring 84 9G-3106 6Y-6481
Stopper 42 5G-2247 5G-2247
Plug 42 6Y-0473 6Y-0473
4
Track Hardware
Bolt 164 9G-3110 9G-3110
Nut 164 1M-1408 1M-1408
Master Bolt (Grouser Shoe) 2 3T-8580 3T-8580
Master Bolt (Grouser Shoe) 2 3T-8601 3T-8601
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 -- 252-7855
Bushing and Seal Group (37 Sections) 1 6Y-3880 6Y-5405
1 Service replaced by 238-6929 hybrid link assembly.
2 Former pin 3P-3880 (Use 9G-1642 stopper).
3 Rigid seal.
4 Not part of link assembly; required to assemble track group.

228
 Skidders
D5H

D5H TSK HEAVY DUTY TRI/QUAD TRACK 1

7.50" (190.5 mm) PITCH -- 3/4" BOLT

QUAD TRACK TRI TRACK PART

QUANTITY QUANTITY NUMBER
Link Assembly -- 42 Section 2 2 106-1638 2
Track Links
RH Pin End Master 1 13 106-1627
4
LH Pin End Master 1 1 106-1628
3
RH Bushing End Master 1 1 106-1629
LH Bushing End Master 1 14 106-1630
RH Regular 41 41 106-1625
LH Regular 41 41 106-1626
Other Components
Stub Pin 84 42 106-1610
Stub Bushing 84 42 107-0720
Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri
-- 1 center chain & 1 outrigger) 5
Bolt 328 246 6V-1792
Nut 328 246 1S-1860
Master Bolt 4 3 106-1642
Master Bolt 4 3 107-0719
1 Wehn installing Heavy Duty Track on existing machines (4KD, 7EG1-1112) refer to IRM UC94-18 installation and guarding information. Also refer
to Special Instruction SEHS9805 for additional guarding information and SEHS9725 for shoe rework options. For more inormation about Quad or
Tri Link track, refer to IRM 91-18 and special instruction SEHS8881. Master shoe required with heavy duty track.
2 Refer to Heavy Duty Track section for component information.
3 Required for right hand outrigger chain.
4 Required for left hand outrigger chain.
5 Not part of link assembly; required to assemble track group.

D5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRI/QUAD TRACK
HYBRID TRACK DESIGN
7.50" (190.5 mm) PITCH -- 5/8" BOLT

QUAD TRACK TRI TRACK PART

QUANTITY QUANTITY NUMBER
Link Assembly -- 42 Section 2 2 238-6929
Track Links
RH Regular 42 42 1 229-6909
2
LH Regular 42 42 229-6910
Other Components
Stub Pin 84 42 9W-8182
Stub Bushing 84 42 9W-8183
Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri
-- 1 center chain & 1 outrigger) 3
Bolt 328 246 9G-3110
Nut 328 246 1M-1408
Master Bolt 4 3 3T-8580
Master Bolt 4 3 3T-8601
1 Required for right hand outrigger chain.
2 Required for left hand outrigger chain.
3 Not part of link assembly; required to assemble track group.

229
 Skidders
D5H

D5H TSK TRACK SHOES

HEAVY DUTY SEALED AND LUBRICATED TRACK
7.50" (190.5 mm) PITCH -- 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 20" (510 mm) 106-1608 106-1617
Moderate Service(Center Punched) 20" (510 mm) 119-0604 119-0603
Moderate Service 22" (560 mm) 106-1607 106-1613
Moderate Service 24" (610 mm) 117-0615 117-0616
Quad (MS) 26" (660 mm) 115-3328 115-3329
Quad (MS) 32" (810 mm) 115-3330 115-3331
Quad (ES) 26" (660 mm) 117-0519 117-0520
Quad (ES) 1 26" (660 mm) 127-6254 127-6255
Tri Offset RH (ES) 20" (510 mm) 107-0707 107-0708
Tri Offset LH (ES) 20" (510 mm) 107-0709 107-0710
Tri Offset RH (MS) 26" (660 mm) 148-2487 148-2594
Tri Offset LH (MS) 26" (660 mm) 148-2494 148-2596
Tri Offset RH (MS, Clipped) 30" (760 mm) 163-2922 163-2923
Tri Offset LH (MS, Clipped) 30" (760 mm) 163-2924 163-2925
1 Use with Heavy Duty Track bolt pattern for the center chain (3/4" bolt holes). Use the conventional Sealed and Lubricated Track bolt pattern for
the outrigger chains (5/8" bolt holes).

D5H TSK, D5H CUSTOM SKIDDER TRACK SHOES

SEALED AND LUBRICATED TRACK
7.50" (190.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER
Extreme Service 20" (510 mm) 6Y-9416
Moderate Service 16" (405 mm) 3T-8584
Moderate Service 18" (460 mm) 3T-8597
Moderate Service 20" (510 mm) 3T-8586
Quad (MS) 26" (660 mm) 9W-8191
Quad (MS) 32" (810 mm) 9W-5187
Extreme Service Tri Offset (RH) 20" (510 mm) 8E-8522
Extreme Service Tri Offset (LH) 20" (510 mm) 8E-8523

D5H TSK, D5H CUSTOM SKIDDER SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 106-1609
Bolt 25 6V-0937
Nut 25 7H-3607
Washer 25 2S-5658

230
 Skidders
D5H

D5H TSK IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 8E-4007
Components of Group
Idler Assembly 1 8E-4008
1
Bearing 2 9P-2245
Shaft 1 8E-4017
Retainer 2 9G-9349
Thrust Washer 2 1 106-7691
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 6T-4871
Seal -- Duo-Cone Group 2 7T-0158
1
Toric Ring 1 6P-8912
1
O-Ring 1 6V-2701
Seal -- Retainer 2 2H-3928
Stopper 1 9G-5664
Plug 1 6Y-0473
3
Mounting Hardware
End Cap 2 8E-4015
Block 2 8E-4023
Bolt (3/4") 4 1D-4614
Washer (3/4") 4 5P-8248
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4722
Toric Ring 4 1 7T-1094
4
O-Ring 1 8T-2272
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and (4)
2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691 THRUST WASHER. See Special
Instruction SEHS8515.
3 These components are not included in the idler group; quantities shown are required to mount each idler.
4 Use 0S-1594 bolt with former idler assembly 7T-4399.

231
 Skidders
D5H

D5H CUSTOM SKIDDER IDLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Group 4 -- 190-1546 1
Components of Group
Idler Assembly 1 190-1547 1 190-1547 1
Bearing 2 2 9P-1360 9P-1360
Shaft 1 6T-3285 161-7350
Collar 2 -- 160-9756
Retainer 2 6T-3284 161-7550
Thrust Washer 3 1 110-3362 110-3362
4
Bolt 12 053-2294 053-2294 4
Washer 12 5M-2894 5M-2894
Stabilizer Ring 2 7T-4030 --
Seal -- Duo-Cone Group (Inverted) 2 7T-4080 --
2
Toric Ring 1 8P-7003 --
O-Ring 2 1 6V-2699 --
Seal -- Duo-Cone (Symmetric) 2 -- 161-7247
Toric Ring 2 2 -- 161-7249
Seal -- Retainer 2 1H-8128 1H-8128
Seal -- Collar 2 -- 5K-0216
Stopper 1 3T-9536 3T-9536
Plug 1 6Y-0473 6Y-0473
5
Mounting Hardware
End Cap 2 9N-4683 9N-4683
Block 2 9N-4680 9N-4680
Bolt (5/8") 4 1A-8651 1A-8651
Washer 4 5P-8247 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086 --
2
Toric Ring 1 7T-4087 --
2
O-Ring 1 6V-2699 --
1 With Increased Tread Wear Material.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and (4)
2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691 THRUST WASHER. See Special
Instruction SEHS8515.
4 Use 0S-1594 bolt with former idler assembly 6T-1763.
5 These components are not included in the idler group; quantities shown are required to mount each idler.

232
 Skidders
D5H

D5H TSK TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (DF) / Machine 6 129-2978
Roller Group (SF) / Machine 8 129-2977
1
Roller Group (DF, Tall Flange) - 136-9349
Components of Group
Roller Shell (DF) 1 121-0828
Roller Shell (SF) 1 121-0825
Roller Shell (DF, Tall Flange) 1 121-0831
Bushing Assembly 2 121-0834
Bearing 2 1 8P-6652
Shaft 1 131-8742
Ring (Retaining-Snap) 2 121-1257
Ring (Lock) 2 6H-7382
End Collar 2 131-9352
Seal -- Duo-Cone Group 2 9W-5224
2
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 3
Bolt (3/4") 4 1D-4610
Washer (3/4") 4 5P-8248
1 Optional double flange roller for guiding; use quantity required for specific roller frame type.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

233
 Skidders
D5H

D5H CUSTOM SKIDDER TRACK ROLLERS

CURRENT DESIGN (END COLLAR, SYMMETRIC SEALS)

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (DF) / Machine 6 121-0827
Roller Group (SF) / Machine 8 121-0824
1
Roller Group (DF, Tall Flange) - 121-0830
Components of Group
Roller Shell (DF) 1 121-0828
Roller Shell (SF) 1 121-0825
Roller Shell (DF, Tall Flange) 1 121-0831
Bushing Assembly 2 121-0834
Bearing 2 1 8P-6652
Shaft 1 131-8742
Ring (Retaining-Snap) 2 121-1257
Ring (Lock) 2 6H-7382
End Collar 2 131-9352
Seal -- Duo-Cone Group 2 9W-5224
2
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 3
Bolt (5/8") 4 8S-9092
Washer (5/8") 4 5P-8247
1 Optional double flange roller for guiding; use quanity required for specific roller frame type.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

234
 Skidders
D5H

D5H TSK, D5H CUSTOM SKIDDER TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 6 --
Single Flange (SF) 8 --
Components of Group
Roller Shell (DF) 1 9P-1362
Roller Shell (SF) 1 9P-1367
Bearing 1 2 9P-1360
Shaft 1 3T-9875
Retainer Assembly 2 3T-9877
Thrust Washer 2 1 9G-9351
Dowel 2 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer 2 5H-6734
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware (D5H TSK)
End Cap (3/4") 2 8E-0301
Bolt (3/4") 4 1D-4610
Washer (3/4") 4 5P-8248
3
Mounting Hardware (D5H Custom Skidder)
End Cap (5/8") 2 8E-0281
Bolt (5/8") 4 1B-4367
Washer (5/8") 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
Toric Ring 4 1 7T-4087
4
O-Ring 1 6V-2699
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
3 These components are not included in the roller group; quantities shown are required to mount each roller.
4 Use 0S-1594 bolt with former idler assembly 7T-4399.

235
 Skidders
D5H

D5H TSK END GUIDING GUARDS

SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 107-2631
Guard Assembly 2 107-2632
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 8Y-1198 1
Strip 2 8Y-1199 2
3
Spacer 4 106-4402
Rear (Lower)
Guard Assembly 2 106-4372
Guard Assembly 2 106-4373
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 8Y-1198 1
Strip 2 8Y-1199 2
3
Spacer 4 106-4402
Rear (Upper)
Guard Assembly 2 107-2644
Guard Assembly 2 107-2645
Bolt 8 5P-2228
Washer 8 8T-4223
Strip 4 9N-4733
1 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).
2 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).
3 Required for Sealed & Lubricated Track.

236
 Skidders
D5H

D5H CUSTOM SKIDDER END GUIDING GUARDS

SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 106-4370
Guard Assembly 2 106-4371
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 8Y-1198 1
Strip 2 8Y-1199 2
3
Spacer 4 106-4402
Rear (Lower)
Guard Assembly 2 106-4372
Guard Assembly 2 106-4373
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 2 8Y-1198 1
Strip 2 8Y-1199 2
3
Spacer 4 106-4402
Rear (Upper)
Guard Assembly 2 107-2644
Guard Assembly 2 107-2645
Bolt 8 5P-2228
Washer 8 8T-4223
Strip 4 9N-4733
1 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).
2 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).
3 Required for Sealed & Lubricated Track.

D5H TSK TRACK ROLLER GUARDS (FULL LENGTH)

SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

Order cast guards from Spokan Industries (Phone: 1-800-541-3601)

D5H TSK CENTER GUIDING GUARDS

HEAVY DUTY TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 106-9982
Bolt 8 7X-0347
Spacer 8 8G-5258

237
Skidders
D5H

D5H CUSTOM SKIDDER CENTER GUIDING GUARDS

HEAVY DUTY TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 107-5721
Bolt 12 7X-0347
Spacer 12 8G-5258

D5H TSK CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8E-9763
Bolt 8 7X-0347
Bolt 16 5P-2228
Washer 16 8T-4223
Strip 4 8G-5335
Spacer 8 8G-5258

D5H LGP CUSTOM SKIDDER CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6Y-3917
Bolt 16 7X-0347
Bolt 6 5P-7971
Bolt 24 5P-2228
Washer 24 8T-4223
Lock Nut 6 3K-2889
Tube 6 4S-6559
Strip 4 6Y-3921
Spacer 16 8G-5258
Washer 6 5P-8247

238
 Low Sprocket Tractors
INDEX

Low Sprocket Tractors

MODELS PAGE NO.

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3................................................... 240
D5K, D5G, D5C....................................................................................................... 285
D6K......................................................................................................................... 311
D4............................................................................................................................ 315
D5, 561.................................................................................................................... 331
D6............................................................................................................................ 346
D7, 571, 572............................................................................................................ 374
D8, 583.................................................................................................................... 392
D9, 594.................................................................................................................... 408

239
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4K, D3K, D4G, D3G, D4C, D3C TRACK

LARGE STEPPED BUSHING
36 SECTION: STD (D3, D3B), LGP (D3)
37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)
39 SECTION: STD (D3C/B, D4C), LGP (D3G, D3C/B, D4C, D3), XL (D3G/C)
41 SECTION: XL/LGP (D3K), XL (D4G/C), LGP (D4G))
43 SECTION: XL/LGP D4K
6.125" (155.6 mm) PITCH - 9/16" BOLT

PART 36 37 39 41 43
NUMBER SECTION SECTION SECTION SECTION Section
Link Assembly (Quantity 2) 206-3130 205-8267 188-8764 194-6843 263-5396
Track Links
RH Pin End Master 6Y-0937 1 1 1 1 1
LH Pin End Master 6Y-0938 1 1 1 1 1
RH Bushing End Master 6Y-0939 1 1 1 1 1
LH Bushing End Master 6Y-0940 1 1 1 1 1
RH Regular 6Y-0935 35 36 38 40 42
LH Regular 6Y-0936 35 36 38 40 42
Other Components
Pin 154-3660 36 37 39 41 43
Bushing 188-6246 36 37 39 41 43
Seal Assembly (Rigid) 250-4002 72 74 78 82 86
Thrust Ring 6S-9049 72 74 78 82 86
Stopper 5G-2247 36 37 39 41 43
Plug 6Y-0473 36 37 39 41 43
1
Track Hardware
Bolt (Grouser Shoe) 4K-7038 140 144 152 160 168
Bolt (Self-Cleaning Shoe) 4K-7038 70 72 76 80 84
Bolt (Self-Cleaning Shoe) 5A-3187 70 72 76 80 84
Nut 7K-2017 140 144 152 160 168
Master Bolt (Grouser Shoe) 5A-3187 4 4 4 4 4
Master Bolt (Self-Cleaning Shoe) 5A-3187 2 2 2 2 2
Master Bolt (Self-Cleaning Shoe) 5P-4683 2 2 2 2 2
Special Sets/Groups
Bushing & Seal Group (39 Sections) 206-3128 1 1 1 1 1
Seal Set (78 Seal Assemblies) 252-7861 1 1 1 1 1
1 Not part of link assembly, required to assemble track group.

240
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4K, D3K SystemOne TRACK

TO BE WITH CENTER TREAD IDLER AND SystemOne ROLLERS
PRESS FIT MASTER
D4K (38 SECTIONS)
D3K (36 SECTIONS)
6.91" (175.5 mm) PITCH -- 16 mm BOLT

36 38
PART NUMBER SECTION SECTION
Link Assembly (2 Quantity) 260-6747 260-6748
Components of Link Assembly
Link Box Standard 260-6744 18 19
Standard Link 260-6740 34 36
1
Standard Link (Press Fit) 260-6740 2 2
Track Hardware 1
Bolt (M16) (Grouser Shoe) 301-4302 144 152
Nut 5I-6125 144 152
Bolt (M16) (Self Cleaning Shoe 254-0228 72 76
Bolt (M16) (Self Cleaning Shoe) 301-4302 72 76
1 Not part of link assembly; required to assemble track group.

D4G, D3G SystemOne TRACK

TO BE USED WITH CENTER TREAD IDLERS AND SystemOne ROLLERS
PRESS FIT MASTER
D3G (35 SECTIONS)
D4G (37 SECTIONS)
6.91" (175.5 mm) PITCH -- 16 mm BOLT

35 37
PART NUMBER SECTION SECTION
Link Assembly (2 Quantity) 260-6746 270-8802
Components of Link Assembly
Link Box Standard 260-6744 16 17
Link Box Offset 260-6745 1 1
Standard Link 260-6740 32 34
Standard Link (Press Fit) 1 260-6740 2 2
1
Track Hardware
Bolt (M16) 4I-7538 140 148
Nut 5I-6125 140 148
1 Not part of link assembly; required to assemble track group.

241
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G/C, D4G/C SystemOne TRACK

TO BE USED WITH CONVENTIONAL IDLERS AND STANDARD ROLLERS
PRESS FIT MASTER
D3G/C (35 SECTIONS)
D4G/C (36 SECTIONS)
6.91" (175.5 mm) PITCH -- 16 mm BOLT

PART 35 36
NUMBER SECTION SECTION
Link Assembly (2 Quantity) 235-2568 235-2563
Components of Link Assembly
Link Box Standard 235-2560 16 18
Link Box Offset 235-2561 1 --
Standard Link 233-5188 32 34
Standard Link (Press Fit) 1 233-5188 2 2
1
Track Hardware
Bolt (M16) 4I-7538 140 144
Nut 5I-6125 140 144
1 Not part of link assembly; required to assemble track group.

D3G/C SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS

TRACK GROUPS NOT STOCKED AS DISTRIBUTION FACILITIES
TO BE USED WITH TRACK LINKS 233-5188, CONVENTIONAL IDLERS, AND STANDARD ROLLERS

PART
QUANTITY NUMBER
Link Assembly Used 235-2568
Moderate Service Shoe (Clipped) -- 16" (405 mm) 2 246-5225
Moderate Service Shoe (Clipped) -- 25" (635 mm) 2 246-5226
Extreme Service Shoe (Clipped) -- 16" (405 mm) 2 246-5479

D4G/C SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS

TRACK GROUPS NOT STOCKED AS DISTRIBUTION FACILITIES
TO BE USED WITH TRACK LINKS 233-5188, CONVENTIONAL IDLERS, AND STANDARD ROLLERS

PART
QUANTITY NUMBER
Link Assembly Used 235-2563
Moderate Service Shoe (Clipped) -- 18" (460 mm) 2 246-5049
Moderate Service Shoe -- 25" (635 mm) 2 235-2566

242
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C/B, D4C/B, D3 SEALED AND LUBRICATED TRACK

36 SECTION: STD (D3, D3B), LGP (D3)
37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)
39 SECTION: STD (D3C/B, D4C), LGP (D3C/B, D4C, D3), XL (D3C)
41 SECTION: D4C (XL)
6.125" (155.6 mm) PITCH - 9/16" BOLT

PART 36 37 39 41
NUMBER SECTION SECTION SECTION SECTION
Link Assembly (2 Quantity) 154-3645 154-3644 154-3646 154-3641
Components of Link Assembly
Track Links
RH Pin End Master 6Y-0937 1 1 1 1
LH Pin End Master 6Y-0938 1 1 1 1
RH Bushing End Master 6Y-0939 1 1 1 1
LH Bushing End Master 6Y-0940 1 1 1 1
RH Regular 6Y-0935 35 36 38 40
LH Regular 6Y-0936 35 36 38 40
Other Components
Pin 154-3660 36 37 39 41
Bushing 111-1522 36 37 39 41
Seal Assembly (Rigid) 250-4002 72 74 78 82
Thrust Ring 6S-9049 72 74 78 82
Stopper 5G-2247 36 37 39 41
Plug 6Y-0473 36 37 39 41
1
Track Hardware
Bolt 4K-7038 140 144 152 160
Nut 7K-2017 140 144 152 160
Master Bolt 5A-3187 4 4 4 4
Special Sets/Groups
Bushing and Seal Group (39 Sections) 206-3128 2 1 1 1 1
Seal Set (78 Seal Assemblies) 252-7861 1 1 1 1
1Not part of link assembly; required to assemble track group.
2Must order (5) 190-7396 sprocket segments to be used with the 206-3128 Bushing and Seal Gp. This group contains the large stepped bushing
54 mm diameter.

243
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C/B, D4C/B, D3 SEALED TRACK

36 SECTION: STD (D3, D3B), LGP (D3)
37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)
39 SECTION: STD (D3C/B, D4C), LGP (D3C/B, D4C, D3), XL (D3C)
41 SECTION: D4C (XL)
6.125" (155.6 mm) PITCH - 9/16" BOLT

PART 36 37 39 41
NUMBER SECTION SECTION SECTION SECTION
Link Assembly (2 Quantity) 6Y-1711 -- 1 6Y-1713 -- 1
Components of Link Assembly
Track Links
RH Pin End Master 6Y-0937 1 1 1 1
LH Pin End Master 6Y-0938 1 1 1 1
RH Bushing End Master 6Y-0939 1 1 1 1
LH Bushing End Master 6Y-0940 1 1 1 1
RH Regular 6Y-0935 1 1 1 1
LH Regular 6Y-0936 1 1 1 1
Other Components
Pin 6B-5278 36 37 39 41
Bushing 6Y-1717 36 37 39 41
Seal 6S-3146 144 148 156 164
Track Hardware 2
Bolt 4K-7038 140 144 152 160
Nut 7K-2017 140 144 152 160
Master Bolt 5A-3187 4 4 4 4
1 Order 36 Section 6Y-1711 or 39 Section 6Y-1713 Link Assembly and add or remove appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

244
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3 SEALED AND LUBRICATED TRACK

FORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS
6.125" (155.6 mm) PITCH -- 9/16" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 -- 1
Components of Link Assembly
Track Links
RH Pin End Master 1 6S-6889
LH Pin End Master 1 6S-6890
RH Bushing End Master 1 6S-6887
LH Bushing End Master 1 6S-6888
RH Regular 35 6S-8343
LH Regular 35 6S-8344
Other Components
Pin 36 154-3660
Bushing 36 6S-9051
Seal Assembly (Rigid) 72 250-4002
Thrust Ring 72 6S-9049
Stopper 36 5G-2247
Plug 36 6Y-0473
Track Hardware 2
Bolt 140 4K-7038
Nut 140 7K-2017
Master Bolt 4 5A-3187
Special Sets/Groups
Bushing and Seal Group (39 Sections) 1 206-3128 3
Seal Set (78 Seal Assemblies) 1 252-7861
1 For 36 or 39 section link assemblies, upgrade by ordering 36 section 154-3645 or 39 section 154-3646 link assembly. This will require ordering
new shoes to be used with "6Y" track links.
2 Not part of link assembly; required to assemble track group.
3 Must order (5) 190-7396 sprocket segments to be used with the 206-3128 Bushing and Seal Gp. This group contains the large stepped bushing
54 mm diameter.

245
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3 SEALED TRACK
FORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS
6.125" (155.6 mm) PITCH -- 9/16" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 -- 1
Components of Link Assembly
Track Links
RH Pin End Master 1 6S-6889
LH Pin End Master 1 6S-6890
RH Bushing End Master 1 6S-6887
LH Bushing End Master 1 6S-6888
RH Regular 35 6S-8343
LH Regular 35 6S-8344
Other Components
Pin 36 6B-5278
Bushing 36 6S-3178
Seal 144 6S-3146
Track Hardware 2
Bolt 140 4K-7038
Nut 140 7K-2017
Master Bolt 4 5A-3187
Special Sets/Groups
Pin and Bushing Group (35 Sections) 1 6S-9561
1 For 36 or 39 section link assemblies, upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly. This will require ordering new
shoes to be used with "6Y" track links.
2 Not part of link assembly; required to assemble track group.

246
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3 TRACK
FORMER, STRAIGHT WALL BUSHING, FULL LINK MASTER
6.125" (155.6 mm) PITCH -- 9/16" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 -- 1
Components of Link Assembly
Track Links
RH Master (Full) 1 6S-8084
LH Master (Full) 1 6S-8085
RH Regular 35 6S-8343
LH Regular 35 6S-8344
Other Components
Pin 35 6B-5278
Master Pin 1 8L-5560
Bushing 35 6S-3178
Master Bushing 1 6S-3179
Seal 144 6S-3146
Spacer 2 6S-3145
2
Track Hardware
Bolt 144 4K-7038
Nut 144 7K-2017
Special Sets/Groups
Pin and Bushing Group (35 Sections) 1 6S-9561
1 For 36 or 39 section link assemblies, upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly. This will require ordering new
shoes to be used with "6Y" track links.
2 Not part of link assembly; required to assemble track group.

247
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3 TRACK
EARLY (FORMER)
6.125" (155.6 mm) PITCH -- 1/2" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 6S-3142 1
Components of Link Assembly
Track Links
RH Master (Full) 1 6S-3147
LH Master (Full) 1 6S-3148
RH Regular 35 6S-3143
LH Regular 35 6S-3144
Other Components
Pin 35 6B-5278
Master Pin 1 8L-5560
Bushing 35 6S-3178
Master Bushing 1 6S-3179
Seal 144 6S-3146
Spacer 2 6S-3145
2
Track Hardware
Bolt 144 8H-7504
Nut 144 6S-3419
Special Sets/Groups
Pin and Bushing Group (35 Sections) 1 6S-9561
1 For 39 section link assembly, order 36 Section 6S-3142 and add 3 sections.
2 Not part of link assembly; required to assemble track group.

248
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 TRACK SHOES
CURRENT MODEL, FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS
6.125" (155.6 mm) -- 9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER STD XL LGP
1
Extreme Service (Clip) 16.0" (405 mm) 9N-4501 9N-4502 Y Y N
1
Moderate Service 14.0" (355 mm) 6Y-1328 6Y-1329 Y Y N
Moderate Service 1 16.0" (405 mm) 198-6987 198-6988 Y Y N
1
Moderate Service (Clip) 16.0" (405 mm) 6Y-1381 6Y-1382 Y Y N
1
Moderate Service 18.0" (460 mm) 198-6989 198-6990 N N Y
Moderate Service (Clip) 1 18.0" (460 mm) 6Y-5344 6Y-5345 N N Y
1
Moderate Service (Clip) 20.0" (510 mm) 6Y-1383 6Y-1384 N N Y
Moderate Service (Clip) 1 25.0" (635 mm) 6Y-1385 6Y-1386 N N Y
1
Moderate Service 25.0" (635 mm) 198-6991 198-6992 N N Y
2
Moderate Service 30.0" (760 mm) 196-4404 196-4405 N N Y
Double Grouser (Clip) 14.0" (355 mm) 9N-4174 9N-4175 Y Y N
Double Grouser (Clip) 25.0" (635 mm) 6Y-1589 6Y-1590 N N Y
Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597 Y Y N
Triple Grouser (Rubber Bonded) 14.0" (355 mm) 9N-4328 9N-4327 Y Y N
Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102 N N Y
1 Increased overlap shoe profile; for use with 6Y track links only.
2 Use with Modification Ar.

D3C, D4C, D4B, D3B, D3 TRACK SHOES

FORMER MODEL, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS
6.125" (155.6 mm) -- 9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER STD XL LGP
Moderate Service 12.0" (305 mm) 6S-8814 6S-7123 Y Y N
Moderate Service 14.0" (355 mm) 6S-8815 6S-9057 Y Y N
Moderate Service 16.0" (405 mm) 9W-4334 9W-4335 Y Y N
Moderate Service 25.0" (635 mm) 6S-8824 6S-9059 N N Y
Double Grouser (Clip) 25.0" (635 mm) 6Y-1589 6Y-1590 N N Y
Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124 Y Y N
Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597 Y Y N
Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102 N N Y

249
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3K/G/C, D4K/G/C SystemOne TRACK SHOES

6.91" (175.5 mm)PITCH - 16 mm BOLT

PART
TYPE WIDTH NUMBER
Moderate Service 16.0" (405 mm) 235-2559
Moderate Service (Clipped) 16.0" (405 mm) 246-5473
Moderate Service 18.0" (460 mm) 243-2693
Moderate Service (Clipped) 18.0" (460 mm) 246-5475
Moderate Service 25.0" (635 mm) 235-2558
Moderate Service (Clipped) 25.0" (635 mm) 246-5474
Extreme Service (Clipped) 16.0" (405 mm) 246-5476
Self Cleaning 25.0" (635 mm) 238-8371

D3 TRACK SHOES
EARLY -- FORMER MODEL, FOR USE WITH 6S-3143/6S-3144 TRACK LINKS
6.125" (155.6 mm) -- 1/2" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER STD LGP
Moderate Service (Clip) 12.0" (305 mm) 6S-3423 Y N
Moderate Service 16.0" (405 mm) 6S-3422 Y N
Moderate Service (Clip) 25.0" (635 mm) 6S-7780 N Y
Triple Grouser (Slots) 14.0" (355 mm) 6S-3149 Y N

D3K, D4K, SEGMENTS

USE WITH LARGE STEPPED BUSHING

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 278-2356
Sprocket Segment (Tough Steel) (6 Tooth) 1 278-2355
Bolt 31 9W-9265
Nut 31 8H-5724
Washer 31 5P-8246

D3K, D4K SystemOne SPROCKET

USE WITH CENTER TREAD IDLER

PART
(PER SIDE) QUANTITY NUMBER
Sprocket (27 Tooth) 1 258-9787
Bolt 31 9W-9265
Nut 31 8H-5724
Washer 31 5P-8246

250
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G, D4G, D3C, D4C, D4B, D3B, D3 SEGMENTS

(USE WITH LARGE STEPPED BUSHING)

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (5 Tooth) 5 190-7396
Adapter Ring 1 6Y-5499
Bolt 25 9W-9265
Nut 1 25 8H-5724
1
Washer 25 5P-8245
1 Not required for Hystat machines (only bolts).

D3G, D4G SystemOne SPROCKET

USE WITH CENTER TREAD IDLERS AND SystemOne ROLLERS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (11 Tooth) 1 258-9792
Sprocket Segment (12 Tooth) 1 258-9793
Bolt 25 9W-9265

D3G/C, D4G/C SystemOne SPROCKETS

USE WITH CONVENTIONAL IDLERS AND STANDARD ROLLERS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (11 Tooth) 1 221-0011
Sprocket Segment (11 Tooth) 1 221-0012
Bolt 25 9W-9265
1
Nut 25 8H-5724
Washer 1 25 5P-8245
1 Not required for Hystat machines (only bolts).

D3G, D4G, D3C, D4C, D4B, D3B, D3 SEGMENTS

FOR USE IN JAPAN ONLY

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 9W-9266
Adapter Ring 1 6Y-5499
Bolt 25 9W-9265
1
Nut 25 8H-5724
Washer 1 25 5P-8245
1 Not required for Hystat machines (only bolts).

251
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C, D4C, D4B, D3B, D3 SPROCKETS

FORMER MODEL

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Assembly (25 Tooth) 1 8Y-0622
Rim (25 Tooth) 1 6Y-1244

D3K, D4K IDLERS

CONVENTIONAL IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Components of Idler
Idler Assembly and Bearing 2 106-9187
Idler Assembly 1 1 9N-4173
1
Bearing 2 6S-3495
Other Components
Shaft 1 254-0644
Thrust Washer 2 6S-7715
Bearing Block 2 254-0634
Seal -- Duo-Cone Group 2 6S-3285
1
Toric Ring 2 6S-3284
Seal -- Shaft O-Ring 2 1H-9696
Plug 1 9F-2247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D4K, D3K SystemOne CENTER TREAD IDLERS

CENTER TREAD IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Components of Idler
Idler Assembly and Bearing 2 261-4473
Other Components
Shaft 1 254-0644
Thrust Washer 2 6S-7715
Bearing Block 2 254-0634
Seal -- Duo-Cone Group 2 6S-3285
1
Toric Ring 2 6S-3284
Seal -- Shaft O-Ring 2 1H-9696
Plug 1 9F-2247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

252
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G, D4G, IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 -1
Components of Groups -
Idler Assembly 1 106-9187
Idler Shell 1 9N-4173
Bushing Assembly 2 6S-3495
Bushing 2 1 6Y-4744
Shaft 1 6S-3697
Thrust Washer 2 6S-7715
Bearing Block (Out RH, In LH) 1 174-7002
Bearing Block (Out LH, In RH) 1 174-7001
Seal -- Duo-Cone Group 2 216-2957
2
Toric Ring 2 216-2956
Seal -- Shaft O-Ring 2 1H-9696
Bolt 2 8C-6877
Washer 2 7X-0618
Lock 2 5M-5000
Plug 1 9F-2247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
2
Toric Ring 2 3N-3095
Attachment
CounterWeight (Per Idler) 2 8Y-1817
Bolt 3 7X-0349
Washer 6 7X-0583
Nut 3 7X-0448
1 Order either 184-6590 or 184-6591 Idler Groups
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

253
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C, D4C, D4B, D3B, D3 IDLERS

CURRENT MODEL

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 -1
Components of Groups -
Idler Assembly 1 106-9187
Idler Shell 1 9N-4173
Bushing Assembly 2 6S-3495
Bushing 2 1 6Y-4744
Shaft 1 6S-3697
Thrust Washer 2 6S-7715
Bearing Block (Out RH, In LH) 1 6S-3451
Bearing Block (Out LH, In RH) 1 6S-3453
Seal -- Duo-Cone Group 2 216-2957
Toric Ring 2 2 216-2956
Seal -- Shaft O-Ring 2 1H-9696
Bolt 2 8C-6877
Washer 2 7X-0618
Lock 2 5M-5000
Plug 1 9F-2247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
2
Toric Ring 2 3N-3095
Attachment
CounterWeight (Per Idler) 2 8Y-1817
Bolt 3 7X-0349
Washer 6 7X-0583
Nut 3 7X-0448
1 Order either 164-1047 or 185-4037 Idler Groups.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

254
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G/C, D4G/C SystemOne CENTER TREAD IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 249-7627
Components of Groups -
Idler Assembly & Brg 1 249-7628
Shaft 1 6S-3697
Thrust Washer 2 6S-7715
Bearing Block 1 250-9513
Bearing Block 1 250-9514
Seal -- Duo-Cone Group 2 6S-3285
1
Toric Ring 2 6S-3284
Seal -- Shaft O-Ring 2 1H-9696
Bolt 2 8C-6877
Washer 2 7X-0618
Lock 2 5M-5000
Plug 1 9F-2247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

255
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C, D4C, D4B, D3B, D3 IDLERS

FORMER MODEL

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 8E-7342
Other Components (Per Idler)
Bearing (Sleeve) 1 2 6Y-4744
Shaft 1 8E-7343
Thrust Washer 2 6Y-2110
Bearing Block (Out RH, In LH) 1 8Y-1697
Bearing Block (Out LH, In RH) 1 8Y-1698
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 2 2 8H-2265
Seal -- Shaft O-Ring 2 1H-9696
Bolt 2 8C-6877
Washer 2 7X-0618
Lock 2 5M-5000
Stopper 1 7G-4332
Plug 1 6Y-0473
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
2
Toric Ring 2 8S-5653
Attachment
CounterWeight (Per Idler) 2 8Y-1817
Bolt 3 7X-0349
Washer 6 7X-0583
Nut 3 7X-0448
1 Component of Idler Assembly
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

256
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6S-3609
Components of Group
Roller Shell 1 172-0160
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 4H-9527
Collar Assembly 1 1M-7918
Plate 1 6K-9860
Bolt 2 6V-4791
Bolt 5 0L-1351
Washer 5 3B-4506
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 4H-9628
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
1
Toric Ring 1 2S-2181
1 Component of preceding group; quantity shown is the quantity per group.

D3K/G/C, D4K/G/C SystemOne CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 225-7650

257
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3K, D4K, TRACK ROLLERS

D4K 7 ROLLER FRAME
D3K 6 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) (D4K) 6 301-0650
Single Flange (SF) (D4K) 8 301-0652
Single Flange (SF) (D3K) 8 301-0652
Double Flange (DF) (D3K) 4 310-0650
Components of Group
Roller Shell (DF) 1 6S-7040
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
1
Bearing 1 6Y-4744
Shaft 1 6S-3171
Ring 2 6S-3172
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal -- Duo-Cone Group 2 216-2957
1
Toric Ring 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
2
Mounting Hardware
Plate 2 302-5722
Bolt (M16) 4 8T-0357
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
Toric Ring 1 2 3N-3095
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

D3K, D4K SystemOne TRACK ROLLERS

D4K 7 ROLLER FRAME
D3K 6 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) -1 301-0654
2
Mounting Hardware
Bolt (16 mm) 4 8T-0088
Washer 4 5P-8247
1 12 required for D3K machines, and 14 required for D4K machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

258
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G, D4G SystemOne TRACK ROLLERS

USE WITH CENTER TREAD IDLERS ONLY AND SystemOne SPROCKET

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) -1 243-3277
2
Mounting Hardware
Bolt (12 mm) 4 6V-8197
Washer 4 2M-0849
Plate (Between Collar and Frame) 2 203-4604
1 12 required for D3G machines, and 14 required for D4G machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

D3C, D4C, D4B, D3B, D3 TRACK ROLLERS

5 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 4 281-8338
Single Flange (SF) 6 281-8339
Components of Group
Roller Shell (DF) 1 6S-7040
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
1
Bearing 1 6Y-4744
Shaft 1 6S-3171
Ring 2 6S-3172
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal -- Duo-Cone Group 2 216-2957
1
Toric Ring 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
2
Mounting Hardware
Bolt (1/2") 4 0S-1585
Washer 4 2M-0849
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
1
Toric Ring 2 3N-3095
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

259
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G XL/LGP, D3C, D4C, D4B, D3B, D3 TRACK ROLLERS

6 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 4 281-8338
Single Flange (SF) 8 281-8339
Components of Group
Roller Shell (DF) 1 6S-7040
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
1
Bearing 1 6Y-4744
Shaft 1 6S-3171
Ring 2 6S-3172
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal -- Duo-Cone Group 2 216-2957
1
Toric Ring 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
2
Mounting Hardware
Bolt (M12) (D3G) 4 6V-8197
Washer 4 2M-0849
Bolt (1/2") (D3C) 4 0S-1585
Washer 4 2M-0849
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
1
Toric Ring 2 3N-3095
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

260
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4G XL/LGP, D4C XL TRACK ROLLERS

7 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 6 281-8338
Single Flange (SF) 8 281-8339
Components of Group
Roller Shell (DF) 1 6S-7040
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
1
Bearing 1 6Y-4744
Shaft 1 6S-3171
Ring 2 6S-3172
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal -- Duo-Cone Group 2 216-2957
1
Toric Ring 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
2
Mounting Hardware
Bolt (M12) (D4G) 4 6V-8197
Washer 4 2M-0849
Bolt (1/2") (D4C) 4 0S-1585
Washer 4 2M-0849
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
1
Toric Ring 2 3N-3095
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

D4K, D3K SystemOne END GUIDING GUARDS (FRONT)

WITH CENTER TREAD IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Plate 2 310-7502
Plate 2 310-7503
Bolt (M10) 12 8T-0722
Washer 12 8T-4121

261
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G/C, D4G/C SystemOne END GUIDING GUARDS (FRONT)

USE WITH CONVENTIONAL IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Wear Strip 1 2 276-1711
1
Wear Strip 2 265-0946
1These wear strips are to be welded to the existing guiding guards. Refer to Special Instruction "SystemOne Track Guiding Arrangements", Media
No. REHS3174, for proper positioning and welding guidelines.

D3G/C, D4G/C SystemOne END GUIDING GUARDS (FRONT)

USE WITH CENTER TREAD IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 265-0945
Guard Assembly 2 265-0953
Wear Strip (5 mm thick) (bottom) 8 265-0935
Wear Strip (16 mm thick) (next to frame) (bottom) 4 265-0949
Bolt (12 mm) 16 8T-4176
Washer 16 8T-4223
Wear Strip (5 mm thick) (on top of frame) 4 165-0935
Bolt (12 mm) 8 6T-4139
Washer 8 8T-4223

D4G, D3G END GUIDING GUARDS (FRONT)

FOR ALL MACHINE SERIAL NUMBERS, EXCEPT RSC

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 8Y-6643
Guard Assembly 2 8Y-6644

D4G, D3G END GUIDING GUARDS (FRONT)

FOR MACHINE SERIAL NUMBER RSC

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 152-7182
Guard Assembly 2 152-7183

262
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G TRACK GUIDING GUARDS (REAR SPROCKET)

(FOR MACHINE SERIAL NUMBER RSC)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 174-6992
Guard Assembly (LH Outer) 1 174-6993
Guard Assembly (RH Inner) 1 174-6994
Guard Assembly (LH Inner) 1 176-9728
Bolt (16 mm) 16 8T-4173
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 132-3831
Guard Assembly (LH Inner) 1 132-3832
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard Assembly (Top RH) 1 174-6983
Guard Assembly (Top LH) 1 174-6985
Bolt (10 mm) 8 8T-4136
Washer 8 8T-4121
Guard 2 132-3861
Bolt (10 mm) 6 8T-4136
Washer 6 8T-4121

D4K TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 263-8355
Guard Assembly (Left Outer) 1 284-7832
Guard Assembly (RH Inner) 1 263-8356
Guard Assembly (LH Inner) 1 284-7833
Bolt (16 mm) 12 7X-2556
Washer 12 8T-4122
Guard Assembly (Right Upper) 1 263-8325
Guard Assembly (Left Upper) 1 263-8337
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Guard Assembly (Top RH) 1 263-8363
Guard Assembly (Top LH) 1 263-8364
Bolt (M12) 10 8T-4139
Washer 10 5P-1076

263
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3K TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 263-2011
Guard Assembly (Left Outer) 1 263-8332
Guard Assembly (RH Inner) 1 286-4262
Guard Assembly (LH Inner) 1 286-4261
Bolt (16 mm) 12 7X-2556
Washer 12 8T-4122
Guard Assembly (Right Upper) 1 263-8325
Guard Assembly (Left Upper) 1 263-8337
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Guard Assembly (Top RH) 1 263-8363
Guard Assembly (Top LH) 1 263-8364
Bolt (M12) 10 8T-4139
Washer 10 5P-1076

D4K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 287-4021
Guard Assembly (Left Outer) 1 287-4022
Guard Assembly (RH Inner) 1 287-4023
Guard Assembly (LH Inner) 1 287-4024
Bolt (16 mm) 12 7X-2556
Washer 12 8T-4122
Guard Assembly (Right Upper) 1 263-8325
Guard Assembly (Left Upper) 1 263-8337
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Guard Assembly (Top RH) 1 263-8363
Guard Assembly (Top LH) 1 263-8364
Bolt (M12) 10 8T-4139
Washer 10 5P-1076

264
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 283-6423
Guard Assembly (Left Outer) 1 283-6425
Guard Assembly (RH Inner) 1 283-6424
Guard Assembly (LH Inner) 1 283-6426
Bolt (16 mm) 12 7X-2556
Washer 12 8T-4122
Guard Assembly (Right Upper) 1 263-8325
Guard Assembly (Left Upper) 1 263-8337
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Guard Assembly (Top RH) 1 263-8363
Guard Assembly (Top LH) 1 263-8364
Bolt (M12) 10 8T-4139
Washer 10 5P-1076

D3G XL LGP TRACK GUIDING GUARDS (REAR SPROCKET)

FOR MACHINES INSIDE JAPAN
ZDN, CLB, CXT

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 199-4907
Guard Assembly (LH Outer) 1 199-4908
Guard Assembly (RH Inner) 1 199-4909
Guard Assembly (LH Inner) 1 199-4910
Bolt (16 mm) 12 8T-4779
Washer 12 9X-8257
Pipe 2 8Y-1009
Bolt (12 mm) 2 7X-3335
Washer 6 8T-4223
Nut 2 8T-4244
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt (12 mm) 8 8T-4192
Washer 8 5P-1076

265
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G XL LGP TRACK GUIDING GUARDS (REAR SPROCKET)

FOR MACHINES OUTSIDE JAPAN
CFC, BYR, JMH, CFF,

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 174-6979
Guard Assembly (LH Outer) 1 174-6980
Guard Assembly (RH Inner) 1 174-6982
Guard Assembly (LH Inner) 1 174-6981
Bolt (16 mm) 16 7X-2556
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard Assembly (Top RH) 1 174-5948
Guard Assembly (Top LH) 1 174-5949
Bolt (10 mm) 6 8T-4136
Washer 6 8T-4121
Guard 2 128-9555
Bolt (10 mm) 2 8T-4136
Washer 2 8T-4121
Bolt (10 mm) 4 8T-4186
Washer 4 8T-4121
Spacer 4 130-1433

266
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4G TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 174-6979
Guard Assembly (LH Outer) 1 174-6980
Guard Assembly (RH Inner) 1 174-6982
Guard Assembly (LH Inner) 1 174-6981
Bolt (16 mm) 16 7X-2556
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard Assembly (Top RH) 1 174-6986
Guard Assembly (Top LH) 1 174-6987
Bolt (10 mm) 8 8T-4136
Washer 8 8T-4121
Guard 2 128-9555
Bolt (10 mm) 2 8T-4136
Washer 2 8T-4121
Bolt (10 mm) 4 8T-4186
Washer 4 8T-4121
Spacer 4 130-1433

267
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C STD HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)

4KS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 128-9545
Guard Assembly (LH Outer) 1 128-9546
Guard Assembly (RH Inner) 1 132-6622
Guard Assembly (LH Inner) 1 132-6615
Bolt 16 7X-0351
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt 8 5C-6565
Washer 8 5P-1076
Guard Assembly (Top RH) 1 128-9473
Guard Assembly (Top LH) 1 128-9474
Bolt 6 5S-7379
Washer 6 5P-1075
Guard 2 128-9555
Bolt 2 4L-6454
Washer 2 5P-1075
Bolt 4 7X-0288
Washer 4 5P-1075
Spacer 4 130-1433

268
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G, D3C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 267-6132
Guard Assembly (LH Outer) 1 267-6131
Guard Assembly (RH Inner) 1 267-6137
Guard Assembly (LH Inner) 1 267-6136
Bolt (16 mm) (Guard Asembly to Frame) 16 7X-2556
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 4 130-1428
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard 2 128-9555
Spacer 4 130-1433
Bolt (10 mm) 4 8T-4186
Bolt (10 mm) 2 8T-4136
Washer 6 8T-4121
Guard Assembly (RH) 1 263-3227
Guard Assembly (LH) 1 263-3230
Bolt (10 mm) 6 8T-4136
Washer 6 8T-4121

D4G, D4C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 267-6132
Guard Assembly (LH Outer) 1 267-6131
Guard Assembly (RH Inner) 1 267-6137
Guard Assembly (LH Inner) 1 267-6136
Bolt (16 mm) (Guard Asembly to Frame) 16 7X-2556
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 4 130-1428
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard 2 128-9555
Spacer 4 130-1433
Bolt (10 mm) 4 8T-4186
Bolt (10 mm) 2 8T-4136
Washer 6 8T-4121
Guard Assembly (RH) 1 263-3232
Guard Assembly (LH) 1 263-3234
Bolt (10 mm) 8 8T-4136
Washer 8 8T-4121

269
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C LGP HYSTAT, D3C XL HYSTAT, D4C STD HYSTAT, D4C LGP HYSTAT, D4C XL
HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)
4LS, 4TS, 5GS, 6BS, 8CS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 128-9545
Guard Assembly (LH Outer) 1 128-9546
Guard Assembly (RH Inner) 1 132-6622
Guard Assembly (LH Inner) 1 132-6615
Bolt 16 7X-0351
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt 8 5C-6565
Washer 8 5P-1076
Guard Assembly (Top RH) 1 133-9599
Guard Assembly (Top LH) 1 133-9600
Bolt 8 5S-7379
Washer 8 5P-1075
Guard 2 128-9555
Bolt 2 4L-6454
Washer 2 5P-1075
Bolt 4 7X-0288
Washer 4 5P-1075
Spacer 4 130-1433

270
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4C STD HYSTAT, D4C LGP HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)
6FS, 7NS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH Outer) 1 144-8092
Guard Assembly (LH Outer) 1 144-8093
Guard Assembly (RH Inner) 1 144-8094
Guard Assembly (LH Inner) 1 144-8095
Bolt (5/8") 12 7X-0343
Washer 12 7X-0591
Pipe 2 8Y-1009
Bolt (1/2") 2 6M-9613
Nut 2 6V-8188
Washer 4 8T-4223
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt (1/2") 8 5C-6565
Washer 8 5P-1076
Guard Assembly (Top RH) 1 133-9599
Guard Assembly (Top LH) 1 133-9600
Bolt (3/8") 8 5S-7379
Washer 8 5P-1075
Guard 2 128-9555
Bolt (3/8") 2 4L-6454
Washer 2 5P-1075
Bolt (3/8") 4 7X-0289
Washer 4 5P-1075
Spacer 4 7C-8246

D3C STD SERIES III TRACK GUIDING GUARDS (REAR SPROCKET)

6SL2556-UP

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer, Left Inner) 2 132-6615
Guard Assembly (Left Outer, Right Inner) 2 132-6622
Bolt (5/8") 16 7X-0351
Washer 16 8T-4122
Guard Assembly (Right Outer, Left Inner) 2 131-1569
Guard Assembly (Left Outer, Right Inner) 2 131-1568
Bolt (1/2") 16 5C-6565
Washer 16 5P-1076
Guard Assembly (Top RH) 1 131-1911
Guard Assembly (Top LH) 1 131-2466
Bolt (3/8") 6 5S-7379
Washer 6 5P-1075

271
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C LGP SERIES III, D3C XL SERIES III, D4C STD SERIES III, D4C LGP SERIES III, D4C XL
SERIES III TRACK GUIDING GUARDS (REAR SPROCKET)
1FW, 6YL1990-UP, 7SL674-UP, 7XL1108-UP, 8EL140-UP, 9TS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer, Left Inner) 2 132-6615
Guard Assembly (Left Outer, Right Inner) 2 132-6622
Bolt (5/8") 16 7X-0351
Washer 16 8T-4122
Guard Assembly (Right Outer, Left Inner) 2 131-1569
Guard Assembly (Left Outer, Right Inner) 2 131-1568
Bolt (1/2") 16 5C-6565
Washer 16 5P-1076
Guard Assembly (Top RH and LH) 2 133-9601
Bolt (3/8") 8 5S-7379
Washer 8 5P-1075

D4K TRACK ROLLER GUARDS FULL LENGTH

USE WITH TRACK GUIDING GUARDS REAR SPROCKET

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 286-1845
Guard Assembly 2 286-1846
Bolt (12 mm) 24 8T-4183
Spacer 24 145-5181
Bolt (12 mm) (Guard to Front Guide) 8 8T-4139
Washer 8 5P-1076
Bolt (M12) (Guard to Rear Guard) 4 8T-4194
Bolt (M12) (Guard to Rear Guard) 4 8T-4176
Washer 8 7X-0550

D3K TRACK ROLLER GUARDS FULL LENGTH

USE WITH TRACK GUIDING GUARDS REAR SPROCKET

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 263-8342
Guard Assembly 2 263-8343
Bolt (12 mm) 20 8T-4183
Spacer 20 145-5181
Bolt (12 mm) (Guard to Front Guide) 8 8T-4139
Washer 8 5P-1076
Bolt (M12) (Guard to Rear Guard) 4 8T-4194
Bolt (M12) (Guard to Rear Guard) 4 8T-4176
Washer 8 7X-0550

272
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4K SystemOne TRACK ROLLER GUARDS FULL LENGTH

USE WITH TRACK GUIDING GUARDS REAR SPROCKET

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 286-1850
Guard Assembly 2 286-1840
Bolt (12 mm) 24 8T-4183
Spacer 24 145-5181
Bolt (12 mm) (Guard to Front Guide) 8 8T-4139
Washer 8 5P-1076
Bolt (M12) (Guard to Rear Guard) 4 8T-4194
Bolt (M12) (Guard to Rear Guard) 4 8T-4176
Washer 8 7X-0550

D3K SystemOne TRACK ROLLER GUARDS FULL LENGTH

USE WITH TRACK GUIDING GUARDS REAR SPROCKET

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 286-1832
Guard Assembly 2 286-1833
Bolt (12 mm) 20 8T-4183
Spacer 20 145-5181
Bolt (12 mm) (Guard to Front Guide) 8 8T-4139
Washer 8 5P-1076
Bolt (M12) (Guard to Rear Guard) 4 8T-4194
Bolt (M12) (Guard to Rear Guard) 4 8T-4176
Washer 8 7X-0550

273
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C STD HYSTAT, D3C STD SERIES III TRACK ROLLER GUARDS (FULL LENGTH)
5 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 138-9692
Guard Assembly 2 138-9693
Bolt (1/2") 16 8T-8917
Washer 16 8T-4223
Pipe 8 8Y-1009
Bolt (1/2") 8 6M-9613
Nut 8 6V-8188
Washer 16 8T-4223
Tab (Front) 4 8Y-3413
Bolt (3/8") 4 4L-6454
Washer 4 8T-4896
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 138-1945
Bolt (1/2") 8 8T-8919
Washer 8 8T-4223

D3C XL, D3C LGP SERIES III, D3C LGP HYSTAT, D3C STD HYSTAT, D4C STD, D4C LGP
SERIES III, D4C STD HYSTAT, D4C LGP HYSTAT TRACK ROLLER GUARDS (FULL
LENGTH)
6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 138-1937
Guard Assembly 2 138-1936
Bolt (1/2") 16 8T-8917
Washer 16 8T-4223
Pipe 8 8Y-1009
Bolt (1/2") 8 6M-9613
Nut 8 6V-8188
Washer 16 8T-4223
Tab (Front) 4 8Y-3413
Bolt (3/8") 4 4L-6454
Washer 4 8T-4896
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 138-1945
Bolt (1/2") 8 8T-8919
Washer 8 8T-4223

274
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4C XL SERIES III, D4C HYSTAT TRACK ROLLER GUARDS (FULL LENGTH)
7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 138-9694
Guard Assembly 2 138-9695
Bolt (1/2") 20 8T-8917
Washer 20 8T-4223
Pipe 10 8Y-1009
Bolt (1/2") 10 6M-9613
Nut 10 6V-8188
Washer 20 8T-4223
Tab (Front) 4 8Y-3413
Bolt (3/8") 4 4L-6454
Washer 4 8T-4896
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 138-1945
Bolt (1/2") 8 8T-8919
Washer 8 8T-4223

D3G TRACK ROLLER GUARDS (FULL LENGTH)

6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 180-7319
Guard Assembly 2 180-7320
Bolt (12 mm) 16 8T-4956
Washer 16 8T-4223
Pipe 8 8Y-1009
Bolt (12 mm) 8 7X-3335
Washer 16 8T-4223
Nut 8 8T-4244
Tab (Front) 4 8Y-3413
Bolt (10 mm) 4 8T-4136
Washer 4 8T-4121
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 180-7321
Bolt (12 mm) 8 8T-4184
Washer 8 8T-4223

275
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4G TRACK ROLLER GUARDS (FULL LENGTH)

7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 198-6093
Guard Assembly 2 198-6094
Bolt (12 mm) 20 8T-4956
Washer 20 8T-4223
Pipe 10 8Y-1009
Bolt (12 mm) 10 7X-3335
Washer 20 8T-4223
Nut 10 8T-4244
Tab (Front) 4 8Y-3413
Bolt (10 mm) 4 8T-4136
Washer 4 8T-4121
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 180-7321
Bolt (12 mm) 8 8T-4184
Washer 8 8T-4223

D3G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

USE WITH CENTER TREAD IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 250-9471
Guard Assembly 2 250-9472
Bolt (12 mm) (Guard Asembly to Frame) 16 8T-4956
Washer (Guard Assembly to Frame) 16 8T-4223
Tube 8 8Y-1009
Bolt (12 mm) 8 7X-3335
Washer 16 8T-4223
Nut 8 8T-4244
Plate (Front) 4 276-1717
Plate (2 mm Thick) (Front) 4 276-1716
Bolt (10 mm) (Plate to Guard As.) 12 8T-4196
Washer 12 8T-4121
Plate (Rear) 4 180-7321
Plate (Rear) 4 276-1718
Bolt (102mm) (Plate to Guard Assembly) 8 8T-4183
Washer 4 8T-4123

276
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

USE WITH CENTER TREAD IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 252-5387
Guard Assembly 2 252-5388
Bolt (12 mm) (Guard Asembly to Frame) 20 8T-4956
Washer (Guard Assembly to Frame) 20 8T-4223
Tube 10 8Y-1009
Bolt (12 mm) 10 7X-3335
Washer 20 8T-4223
Nut 8 8T-4244
Plate (Front) 4 276-1717
Plate (2 mm Thick) (Front) 4 276-1716
Bolt (10 mm) (Plate to Guard As.) 12 8T-4196
Washer 12 8T-4121
Plate (Rear) 4 180-7321
Plate (Rear) 4 276-1718
Bolt (102mm) (Plate to Guard Assembly) 8 8T-4183
Washer 4 8T-4123

D3C, D4C TRACK ROLLER GUARDS (FULL LENGTH)

5 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8Y-3439
Guard Assembly 2 8Y-3440
Pipe 10 8Y-1009
Bolt 20 8T-8917
Bolt 10 7X-0471
Bolt 8 4L-6454
Washer 30 8T-4223
Washer 8 8T-4896
Tab 8 8Y-3413
Nut 10 6V-8188

277
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C, D4C TRACK ROLLER GUARDS (FULL LENGTH)

6 ROLLER FRAME

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8Y-3437
Guard Assembly 2 8Y-3438
Pipe 10 8Y-1009
Bolt 20 8T-8917
Bolt 10 7X-0471
Bolt 8 4L-6454
Washer 30 8T-4223
Washer 8 8T-4896
Tab 8 8Y-3413
Nut 10 6V-8188

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)

79U1-4109

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 1 6S-3765
Guard Assembly 1 6S-3766
Guard Assembly 1 6S-3767
Guard Assembly 1 6S-3768
Pipe 12 6S-3429
Bolt 40 0S-1595
Bolt 12 6M-9613
Washer 40 4B-4280
Washer 52 3B-4508
Washer 24 1A-7774
Nut 12 1D-4719

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)

79U4110-UP, 23Y, 27Y, 3YC

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 6S-9627
Guard Assembly 2 6S-9628
Pipe 12 6S-3429
Bolt 40 0S-1595
Bolt 12 2D-0516
Washer 52 5P-8245
Nut 14 1F-7958

278
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)

23Y, 24Y, 27Y, 28Y, 5MC, 3YC, 2XF, 1SG

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 5G-5965
Guard Assembly 2 5G-5966
Pipe 14 6S-3429
Bolt 44 0S-1595
Bolt 14 2D-0516
Washer 38 5P-8245
Nut 14 1F-7958

D3K CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 282-3669
Bolt (M12) 8 8T-4194
Washer 8 198-4778

D3K CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 276-1753
Bolt (M12) 8 8T-4194
Washer 8 198-4778

D4K SystemOne CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 276-1754
Bolt (M12) 8 8T-4194
Washer 8 198-4778

D3K SystemOne CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 222-3668
Bolt (M12) 8 8T-4194
Washer 8 198-4778

279
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3G/C, D4G/C SystemOne CENTER GUIDING GUARDS

USE WITH CONVENTIONAL IDLERS
ROLLER POSITION #3 FOR D3G/C, #4 FOR D4G/C

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 278-1011
Bolt (12 mm) 8 8T-4194
Washer 8 198-4778

D3G XL/LGP SystemOne CENTER GUIDING GUARDS

USE WITH CENTER TREAD IDLERS)
ROLLER POSITION #3

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 276-1757
Bolt (12 mm) 8 8T-4194
Washer 8 198-4778

D4G XL/LGP SystemOne CENTER GUIDING GUARDS

USE WITH CENTER TREAD IDLERS)
ROLLER POSITION #4

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 276-1766
Bolt (12 mm) 8 8T-4194
Washer 8 198-4778

280
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C, D3B SPROCKET/IDLER TRACK FRAME GUARDS 1

STD

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH) 1 -- 2
Roller Frame Guard (LH) 1 -- 3
Idler Guard 2 8Y-8964
Sprocket Guard (RH) 1 8Y-8967
Sprocket Guard (LH) 1 8Y-8968
Wiper Guard (RH) 1 8Y-8977
Wiper Guard (LH) 1 8Y-8978
Bracket 2 6S-6741
Bolt 34 5S-7379
Bolt 6 8T-8917
Washer 34 5P-1075
Washer 6 8T-4223
1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the
guarding is to shed material and prevent its entry into the undercarriage system (link box area).
2 Guard (RH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y-6640 Tab Assembly.
3 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y-6640 Tab Assembly.

D3C XL, D4C STD, D4B STD SPROCKET/IDLER TRACK FRAME GUARDS 1

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH) 1 -- 2
Roller Frame Guard (LH) 1 -- 3
Idler Guard 2 102-9920
Sprocket Guard (RH) 1 8Y-8967
Sprocket Guard (LH) 1 8Y-8968
Wiper Guard (RH) 1 8Y-8977
Wiper Guard (LH) 1 8Y-8978
Bracket 2 6S-6741
Bolt 34 5S-7379
Bolt 6 8T-8917
Washer 34 5P-1075
Washer 6 8T-4223
1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the
guarding is to shed material and prevent its entry into the undercarriage system (link box area).
2 Guard (RH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y-6640 Tab Assembly.
3 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y-6640 Tab Assembly.

281
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3C, D4C, D4B SPROCKET/IDLER TRACK FRAME GUARDS 1

LGP

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH) 1 -- 2
Roller Frame Guard (LH) 1 -- 3
Idler Guard 2 102-9920
Sprocket Guard (RH) 1 8Y-8967
Sprocket Guard (LH) 1 8Y-8968
Wiper Guard (RH) 1 8Y-8977
Wiper Guard (LH) 1 8Y-8978
Bracket 2 6S-6741
Bolt 34 5S-7379
Bolt 6 8T-8917
Washer 34 5P-1075
Washer 6 8T-4223
1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the
guarding is to shed material and prevent its entry into the undercarriage system (link box area).
2 Guard (RH) 103-8836 serviced by (1) 139-5742 Guard Assembly and (1) 8Y6660 Tab Assembly.
3 Guard (LH) 103-8837 serviced by (1) 139-5741 Guard Assembly and (1) 8Y6660 Tab Assembly.

D4K, D3K IDLER GUARDS

CONVENTIONAL IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Bracket Assembly (To Frame) 2 305-1443
Bracket Assembly (To Frame) 2 305-1446
Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192
Washer 8 7X-0584
Guard 2 305-1448
Plate 4 305-1450
Plate 2 305-1449
Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956
Washer 8 8T-4223
Plate 2 290-3391
Bolt (M10) 4 8T-4195
Washer 8 7X-7729
Nut (M10) 4 8T-4133
Bracket Assembly (Front) 2 305-1439
Bracket Assembly (Front) 2 305-1442
Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139
Bolt (M12) 8 8T-4184
Washer 12 8T-4223

282
 Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4K, D3K SystemOne IDLER GUARDS

CENTER TREAD IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Bracket Assembly (To Frame) 2 305-1443
Bracket Assembly (To Frame) 2 305-1446
Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192
Washer 8 7X-0584
Guard 2 305-1454
Plate 4 305-1455
Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956
Washer 8 8T-4223
Plate 2 290-3391
Bolt (M10) 4 8T-4195
Washer 8 7X-7729
Nut (M10) 4 8T-4133
Bracket Assembly (Front) 2 305-1451
Bracket Assembly (Front) 2 305-1453
Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139
Bolt (M12) 8 8T-4184
Washer 12 8T-4223

D3 STD UPPER TRACK ROLLER FRAME GUARDS

82U, 79U

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH-Front) 1 6S-6316
Roller Frame Guard (LH-Front) 1 6S-6326
Idler Guard 1 6S-6665
Idler Guard 1 6S-6667
Sprocket Guard (RH) 1 6S-6272
Sprocket Guard (LH) 1 6S-6273
Cover 2 6S-3747
Bolt 36 0L-1351
Washer 32 4B-4278
Lock Washer 36 5M-2894

283
Low Sprocket Tractors
D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D3 LGP UPPER TRACK ROLLER FRAME GUARDS

6N, 83U

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH-Front) 1 6S-6316
Roller Frame Guard (LH-Front) 1 6S-6326
Idler Guard 2 6S-6405
Sprocket Guard (RH) 1 6S-6272
Sprocket Guard (LH) 1 6S-6273
Cover 2 6S-3747
Bolt 40 0L-1351
Washer 36 4B-4278
Lock Washer 40 8T-4223

D3G, D4G, D3C, D4C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 102-5920
Guard Assembly (LH) 2 102-5921

D3G, D4G, D3C, D4C IDLER ROCK GUARDS (WITH COUNTER WEIGHT)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 108-1578
Guard Assembly (LH) 2 108-1579

284
 Low Sprocket Tractors
D5K, D5G, D5C

D5K XL/LGP SEALED AND LUBRICATED TRACK

INCREASED STEPPED BUSHING
WWW, YYY, JLF
6.75" (171.5 mm) PITCH 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 289-0270
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-9263
LH Pin End Master 1 6Y-9264
RH Bushing End Master 1 9G-8585
LH Bushing End Master 1 9G-8586
RH Regular 39 6Y-9261
LH Regular 39 6Y-9262
Other Components
Pin 40 160-7816 1
Bushing 40 224-3959 2
Seal Assembly (Rigid) 80 250-4000
Thrust Ring 40 6Y-6486
Stopper 40 5G-2247
Plug 40 6Y-0473
Track Hardware 3
Bolt 156 9G-3110
Nut 156 1M-1408
Master Bolt 2 3T-8601
Master Bolt 2 9G-8592
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 252-7860
Bushing and Seal Group (39 Sections) 1 227-9954 4
1 Former pin 6Y-9260 (Use 9G-1642 stopper).
2 9G-8588 track bushing still available when servicing 6I-9527 & 6Y-5407 link assemblies.
3 Not part of link assembly; required to assemble track group.
4 Contains 224-3959 bushings.

285
 Low Sprocket Tractors
D5K, D5G, D5C

D5K XL/LGP SystemOne TRACK

PRESS FIT MASTER
WWW, YYY, JLF
7.50" (190.5 mm) PITCH - 18 mm BOLT

PART
QUANTITY NUMBER
Link Assembly - 36 Section 2 235-2535
Components of Link Assembly
Link Box Standard 18 235-2536
Standard Link 34 235-2529
1
Standard Link (Press Fit) 2 235-2529
Track Hardware 1
Bolt (M18) 144 238-0472
Nut 144 238-0473
1 Not part of link assembly; required to assemble track group.

286
 Low Sprocket Tractors
D5K, D5G, D5C

D5G XL/LGP,D5C STD/XL/LGP, SEALED AND LUBRICATED TRACK

INCREASED STEPPED BUSHING
37 SECTION:D5C STD/LGP: 6PJ372-UP, 3MK243-UP, 9DL1-UP, 6ZL1-UP, 6CS1-UP
39 SECTION :D5G XL/LGP, D5C XL: 7PS, 8ZS, FDH, CLF, FDW, CLW, WGB
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART
NUMBER 37 SECTION 39 SECTION
1
Link Assembly (Quantity 2) 227-9960 227-9976 2
Components of Link Assembly (Current D4H)
Track Links
RH Pin End Master 6Y-9263 1 1
LH Pin End Master 6Y-9264 1 1
RH Bushing End Master 9G-8585 1 1
LH Bushing End Master 9G-8586 1 1
RH Regular 6Y-9261 36 38
LH Regular 6Y-9262 36 38
Other Components
Pin 160-7816 3 37 39
4
Bushing 224-3959 37 39
Seal Assembly (Rigid) 250-4000 74 78
Thrust Ring 6Y-6486 74 78
Stopper 5G-2247 37 39
Plug 6Y-0473 37 39
5
Track Hardware
Bolt 9G-3110 144 152
Nut 1M-1408 144 152
Master Bolt 3T-8601 2 2
Master Bolt 9G-8592 2 2
Special Sets/Groups
Seal Set (88 Seal Assemblies) 252-7860 1 1
6
Bushing and Seal Group (39 Sections) 227-9954 1 1
1 6I-9527 link assembly with 9G-8588 bushing still avaliable in Japan.
2 6Y-5407 link assembly with 9G-8588 bushing still avaliable in Japan.
3 Former pin 6Y-9260 (Use 9G-1642 stopper).
4 9G-8588 track bushing still avaliable when servicing 6I-9527 & 6Y5407 link assemblies.
5 Not part of link assembly; required to assemble track group.
6 Contains 224-3959 bushings.

287
 Low Sprocket Tractors
D5K, D5G, D5C

D5G XL/LGP SystemOne Track

Press Fit Master
6.75" (171.5 mm) PITCH - 16 mm BOLT

PART
QUANTITY NUMBER
Link Assembly - 39 Section 2 235-2549
Components of Link Assembly
Link Box Standard 18 235-2522
Link Box Offset 1 235-2523
Standard Link 36 235-2514
Standard Link (Press Fit) 1 2 235-2514
1
Track Hardware
Bolt (M16) 156 218-3274
Nut 156 5I-6125
1 Not part of link assembly; required to assemble track group.

D5G XL/LGP SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS
TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 235-2549
Moderate Service -- 20.0" (510 mm) (XL) 2 235-2552
Moderate Service -- 26.0" (660 mm) (LGP) 2 235-2550

288
 Low Sprocket Tractors
D5K, D5G, D5C

D5G XL/LGP, D5C STD/XL/LGP, ROTATING BUSHING TRACK 1

6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART
NUMBER 37 SECTION 39 SECTION
Link Assembly (Quantity 2) 150-4373 161-4000
Components of Link Assembly
Track Links
RH Pin End Master 108-0949 1 1
LH Pin End Master 108-0950 1 1
RH Bushing End Master 2 109-0488 1 1
2
LH Bushing End Master 109-0489 1 1
2
RH Regular 109-0486 36 38
LH Regular 2 109-0487 36 38
Other Components
Pin 152-8075 37 39
Bushing 109-0478 37 39
Seal Assembly (Rigid) 250-3992 148 156
Thrust Ring 152-8069 148 156
Stopper 5G-2247 37 39
Plug 6Y-0473 37 39
Track Hardware 3
Bolt 9G-3110 144 152
Nut 1M-1408 144 152
Master Bolt 9G-8592 2 2
Master Bolt 3T-8601 2 2
1 Rotating Bushing Track is an applicatioin specific undercarriage, designed for high abrasion/low impact applications (4000 hour system life or
less). When installing Rotating Bushing Track on existing machines, refer to IRM UC98-19 for adaptablity, installation, and guarding information.
2 Contains link and insert. Insert is not serviced.
3 Not part of the link assembly; required to assemble track group.

289
 Low Sprocket Tractors
D5K, D5G, D5C

D5C STD, D5C LGP SEALED AND LUBRICATED TRACK

FORMER MODEL WITH 9K LINKS
6PJ1-371, 3MK1-242
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 37 Section 2 -- 1
Components of Link Assembly (Former D4E)
Track Links
RH Pin End Master 1 1V-4603
LH Pin End Master 1 1V-4604
RH Bushing End Master 1 1V-4605
LH Bushing End Master 1 1V-4606
RH Regular 36 9K-6629
LH Regular 36 9K-6628
Other Components
Pin 37 154-3664 2
Bushing 37 7T-4628
Seal Assembly (Rigid) 74 250-4004
Thrust Ring 74 1V-3361
Stopper 37 5G-2247
Plug 37 6Y-0473
Track Hardware 3
Bolt 144 7H-3597
Nut 144 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 154-3654
Seal Set (80 Seal Assemblies) 1 252-7862
1 Upgrade to 227-9960 Link Assembly.
2 Former pin 9K-8550 (Use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

D5K, D5G, D5C TRACK SHOES

CURRENT MODEL WITH 6Y LINKS & RBT LINK ASSEMBLY

TYPE WIDTH PART NUMBER STD XL LGP

Extreme Service 18.0" (460 mm) 6Y-5624 Y Y N
Extreme Service 20.0" (510 mm) 8E-9816 Y Y Y
Moderate Service 18.0" (460 mm) 3T-0360 Y Y N
Moderate Service 20.0" (510 mm) 8E-9812 Y Y Y
Moderate Service 26.0" (660 mm) 6I-9573 N N Y
Moderate Servcice (Use on Wide Gauge Machine Only) 30.0" (760 mm) 216-6286 N N Y
Double Grouser 16.0" (405 mm) 102-3585 Y Y N
Double Grouser 18.0" (460 mm) 102-3587 Y Y Y

290
 Low Sprocket Tractors
D5K, D5G, D5C

D5K SystemOne TRACK SHOES

7.50" (190.5 mm) PITCH - 18 mm BOLT

PART
TYPE WIDTH NUMBER
Moderate Service 20.0" (510 mm) 235-2554
1
Moderate Service 26.0" (660 mm) 235-2555
Moderate Service 2 30.0" (760 mm) 235-2534
1 Use on LGP machines only.
2 Use on LGP wide gauge machine only.

D5G SystemOne™ TRACK SHOES

6.75" (171.5 mm) PITCH - 16 mm BOLT

PART
TYPE WIDTH NUMBER
Moderate Service 18.0" (460 mm) 260-6769
Moderate Service 20.0" (510 mm) 260-6768
1
Moderate Service 26.0" (660 mm) 260-6770
Extreme Service 18.0" (460 mm) 260-6773
Extreme Service 20.0" (510 mm) 260-6772
1 Use on LGP machines only.

D5C TRACK SHOES

FORMER MODEL WITH 9K LINKS

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER STD XL LGP
Extreme Service 20.0" (510 mm) 2V-3819 5V-2906 Y Y Y
Moderate Service 18.0" (460 mm) 206-3510 206-3518 Y Y N
Moderate Service 20.0" (510 mm) 206-3511 206-3519 Y Y Y
Double Grouser 18.0" (460 mm) 8E-4799 8E-4800 Y Y Y

D5K SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (4 Tooth) 3 278-2359
Sprocket Segment (Tough Steel) (5 Tooth) 3 278-2358
Bolt 27 6V-0937
Nut 27 7H-3607
Washer 27 6V-4316

291
 Low Sprocket Tractors
D5K, D5G, D5C

D5K SystemOne SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket (25 Tooth) 1 258-9788
Bolt 27 6V-0937
Nut 27 7H-3607
Washer 27 6V-4316

D5G, D5C SPROCKETS

Sealed and Lubricated, Rotating Bushing, and SystemOne Track

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677 1
Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678 2
Bolt 23 6V-0937
Nut 3 23 7H-3607
Washer 3 23 2S-5658
1 Segment 114-9278 available for use in Japan.
2 Segment 6I-9526 available for use in Japan.
3 Not required for Hystat machines (only bolts).

D5K IDLERS
CONVENTIONAL IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly and Bearing 2 262-2093
1
Bearing 2 243-5321
Other Components
Shaft 1 254-0645
Bearing Block 2 254-0635
Seal -- Duo-Cone Group 2 109-0885
1
Toric Ring 2 6Y-2270
Seal -- Shaft O-Ring 2 7F-8267
Plug 1 9F-2247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

292
 Low Sprocket Tractors
D5K, D5G, D5C

D5K SystemOne CENTER TREAD IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly and Bearing 2 261-4472
1
Bearing 2 243-5321
Other Components
Shaft 1 254-0645
Bearing Block 2 254-0635
Seal -- Duo-Cone Group 2 109-0885
1
Toric Ring 2 6Y-2270
Seal -- Shaft O-Ring 2 7F-8267
Plug 1 9F-2247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D5G IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 -1
Components of Group
Idler 2 9U-9065
Bushing Assembly 2 1V-9611
2
Bushing 1 7K-1089
Shaft 1 8E-7899
Bearing Block 1 174-7006
Bearing Block 1 174-7007
Seal -- Duo-Cone Group 2 2M-2858
2
Toric Ring 2 1M-3097
Seal 2 1H-8128
Seal 2 7F-8267
Bolt 12 9B-7237
Washer 12 8T-4896
Lock 2 5M-5000
Bolt 2 8C-6877
Washer 2 7X-0618
Stopper 1 7G-4332
Plug 1 6Y-0473
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
1 Order Either 184-6592 or 184-6593 Idler Groups
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

293
 Low Sprocket Tractors
D5K, D5G, D5C

D5C IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 -- 1
Components of Group
Idler 2 9U-9065
Bushing Assembly 2 1V-9611
2
Bushing 1 7K-1089
Shaft 1 8E-7899
Bearing Block 1 8Y-6650
Bearing Block 1 8Y-6651
Seal -- Duo-Cone Group 2 2M-2858
2
Toric Ring 2 1M-3097
Seal 2 1H-8128
Seal 2 7F-8267
Bolt 12 9B-7237
Washer 12 8T-4896
Lock 2 5M-5000
Bolt 2 8C-6877
Washer 2 7X-0618
Stopper 1 7G-4332
Plug 1 6Y-0473
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 2 2 2S-2181
1 Order Either 164-1048 or 185-4038 Idler Groups
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

294
 Low Sprocket Tractors
D5K, D5G, D5C

D5G SystemOne CENTER TREAD IDLER

PART
QUANTITY NUMBER
Idler Group 2 250-0367 1
Components of Group
Idler Assembly 1 250-0368
Shaft 1 243-5319
Bearing Block 1 250-9515
Bearing Block 1 250-9516
Seal -- Duo-Cone Group 2 148-3533
Toric Ring 2 2 160-6631
Seal - Shaft 0-Ring 2 7F-8267
Lock 2 5M-5000
Bolt 2 053-2294
Washer 2 5M-2894
Stopper 1 7G-4332
Plug 1 9F-2247
1 When installing Center Tread Idler for the first time, new yoke assembly, rock guards, carrier roller bracket assembly, and front end guiding
guards are required.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

295
 Low Sprocket Tractors
D5K, D5G, D5C

D5K, D5G, D5C CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Plate 1 6K-9860
Bolt 2 6V-4791
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
1
Toric Ring 1 2S-2181
1 Component of preceding assembly or group; quantity shown is the quantity per group.

D5K, D5G SystemOne CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 227-5971

296
 Low Sprocket Tractors
D5K, D5G, D5C

D5K, D5G, D5C TRACK ROLLERS

CURRENT DESIGN END COLLLARS, SYMMETRIC DESIGN

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (DF) 41 124-8240
Roller Group (SF) 8 124-8237
2
Roller Group (DF, Tall Flange) - 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 1 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
Ring (Retaining-Snap) 2 6V-6768
Ring (Lock) 2 6H-7382
End Collar 2 132-1951
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 3 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
Bolt (16 mm) (D5K, D5G) 4 8T-0357
Bolt (5/8") (D5C) 4 1A-8537
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 3 2 2S-2181
1 6 Double Flange Roller Groups required for D5K XL/LGP, D5G XL/LGP, D5C XL/LGP machines.
2 Optional DF roller for guiding; use quantity required for specific roller frame type.
3 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

D5K, D5G SystemOne TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group 14 237-8201
1
Mounting Hardware
Bolt (16 mm) 4 8T-0357
Washer 4 5P-8247
1 These components are not included in the roller group; quantities shown are required to mount each roller.

297
 Low Sprocket Tractors
D5K, D5G, D5C

D5C TRACK ROLLERS

FORMER DESIGN BOLT-ON RETAINER

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (DF) / Machine 4 --
Roller Group (SF) / Machine 8 --
Components of Group
Roller Shell (DF) 1 7G-4832
Roller Shell (SF) 1 7G-4833
Bearing 1 2 8P-7002
Shaft 1 8E-6573
Retainer Assembly 2 3T-9538
Thrust Washer 2 1 9G-9351
Dowel 2 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer O-Ring 2 1H-6227
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
End Cap 2 7G-4829
Bolt (5/8") 4 1B-4367
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
1
Toric Ring 1 7T-4087
O-Ring 1 1 6V-2699
1 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.
2 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

298
 Low Sprocket Tractors
D5K, D5G, D5C

D5K XL, LGP TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 254-0681
Guard Assembly (Left Outer) 1 262-5877
Guard Assembly (RH Inner) 1 286-7212
Guard Assembly (LH Inner) 1 286-7211
Bolt (16 mm) 12 8T-4173
Washer 12 8T-4122
Guard Assembly (Right Upper) 1 262-5878
Guard Assembly (Left Upper) 1 254-0669
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Guard Assembly (Top RH) 1 263-8365
Guard Assembly (Top LH) 1 263-8366
Bolt (M12) 4 8T-4183
Bolt (M12) 4 8T-4139
Washer 8 5P-1076

D5K XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 285-7502
Guard Assembly (Left Outer) 1 285-7499
Guard Assembly (RH Inner) 1 285-7511
Guard Assembly (LH Inner) 1 285-7505
Bolt (16 mm) 12 8T-4173
Washer 12 8T-4122
Guard Assembly (Right Upper) 1 262-5878
Guard Assembly (Left Upper) 1 254-0669
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Guard Assembly (Top RH) 1 263-8365
Guard Assembly (Top LH) 1 263-8366
Bolt (M12) 4 8T-4183
Bolt (M12) 4 8T-4139
Washer 8 5P-1076

299
Low Sprocket Tractors
D5K, D5G, D5C

D5G XL, LGP TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 174-6992
Guard Assembly (Left Outer) 1 174-6993
Guard Assembly (RH Inner) 1 176-9728
Guard Assembly (LH Inner) 1 174-6994
Bolt (16 mm) 16 8T-4173
Washer 16 8T-4122
Guard Assembly (Right Inner) 1 132-3831
Guard Assembly (Left Inner) 1 132-3832
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard 2 132-3861
Bolt (10 mm) 6 8T-4136
Washer 6 8T-4121
Guard Assembly (Top RH) 1 174-6983
Guard Assembly (Top LH) 1 174-6985
Bolt (10 mm) 8 8T-4136
Washer 8 8T-4121

D5G XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 276-1699
Guard Assembly (Left Outer) 1 276-1700
Guard Assembly (RH Inner) 1 276-1701
Guard Assembly (LH Inner) 1 276-1702
Bolt (16 mm) 16 8T-4173
Washer 16 8T-4122
Guard Assembly (Right Inner) 1 276-1690
Guard Assembly (Left Inner) 1 276-1691
Bolt (12 mm) 8 8T-4139
Washer 8 5P-1076
Guard 2 132-3861
Bolt (10 mm) 6 8T-4136
Washer 6 8T-4121
Guard Assembly (Top RH) 1 174-6983
Guard Assembly (Top LH) 1 174-6985
Bolt (10 mm) 8 8T-4136
Washer 8 8T-4121

300
 Low Sprocket Tractors
D5K, D5G, D5C

D5C HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)

4WS, 5HS, 6CS, 7PS, 9AS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer) 1 132-6625
Guard Assembly (Left Outer) 1 132-3829
Guard Assembly (RH Inner) 1 132-3830
Guard Assembly (LH Inner) 1 132-3849
Bolt (5/8") 16 7X-0353
Washer 16 8T-4122
Guard Assembly (Right Inner) 1 132-3831
Guard Assembly (Left Inner) 1 132-3832
Bolt (1/2") 8 5C-6565
Washer 8 5P-1076
Guard 2 132-3861
Bolt (3/8") 6 4L-6454
Washer 6 5P-1075
Guard Assembly (Top RH) 1 132-4676
Guard Assembly (Top LH) 1 132-4677
Bolt (3/8") 4 4L-6454
Bolt (3/8") 4 5S-7379
Washer 8 5P-1075

D5C TRACK GUIDING GUARDS (REAR SPROCKET)

6ZL795-UP, 7YL121, 8ZS1-UP, 9DL2236-UP

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (Right Outer, Left Inner) 2 132-3849
Guard Assembly (Left Outer, Right Inner) 2 132-3830
Bolt (5/8") 16 7T-0353
Washer 16 8T-4122
Guard Assembly (Right Outer, Left Inner) 2 132-3832
Guard Assembly (Left Outer, Right Inner) 2 132-3831
Bolt (1/2") 16 5C-6565
Washer 16 5P-1076
Guard Assembly (Top RH and LH) 2 132-4912
Bolt (3/8") 4 4L-6454
Bolt (3/8") 4 5S-7379
Washer 8 5P-1075

301
Low Sprocket Tractors
D5K, D5G, D5C

D5K XL, LGP SystemOne END GUIDING GUARDS (FRONT)

PART
(PER MACHINE) QUANTITY NUMBER
Plate 2 310-7375
Plate 2 310-7376
Bolt (M10) 16 8T-0722
Washer 16 8T-4121

D5G, D5C, XL LGP END GUIDING GUARDS (FRONT)

PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 152-7182
Guard Assembly 2 152-7183

D5C END GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 8Y-8909
Wear Strip 1 105-4125
Front (Outer RH, Inner LH)
Guard Assembly 1 8Y-8908
Wear Strip 1 105-4125
Rear (Outer RH, Inner LH)
Guard Assembly 1 8Y-8912
Rear (Outer LH, Inner RH)
Guard Assembly 1 8Y-8911

302
 Low Sprocket Tractors
D5K, D5G, D5C

D5G XL/LGP SystemOne END GUIDING GUARDS (FRONT)

REQUIRED WITH CENTER TREAD IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 265-0929
Guard Assembly 2 265-0932
Strip - Wear (20 mm Thick) 1 4 265-0934
1
Strip - Wear (5 mm Thick) 8 265-0935
Bolt (12 mm) 16 8T-4176
Washer 16 8T-4223
Strip - Wear (5 mm Thick) (Place on Top of Frame) 4 265-0935
Bolt (12 mm) 8 8T-4139
Washer 8 8T-4223
1 Place between bottom of track roller frame and guard assembly.

D5G XL/LGP SystemOne END GUIDING WEAR STRIPS (FRONT)

REQUIRED WITH CONVENTIONAL IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Wear Strip (Wear Strip) 1 2 250-9505
Wear Strip (38 mm Thick) 1 2 276-1692
1Remove current wear strips from existing front end guiding guards, weld a 5 mm shim (supplied by the dealer) and wear strips to existing front
end guiding guards.

D5K XL/LGP TRACK ROLLER GUARD (FULL LENGTH)

USE WITH REAR SPROCKET GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 263-2009
Guard Assembly 2 263-2010
Bolt (12 mm) 24 8T-4184
Spacer 24 145-5181
Bolt (12 mm) (Guard to Front Guide) 8 8T-4139
Washer 8 5P-1076
Bolt (M16) (Guard to Rear Guard) 4 7X-2553
Washer 4 8T-4122
Bolt (M12) (Guard to Rear Guard) 4 8T-4176
Washer 4 7X-0550

303
Low Sprocket Tractors
D5K, D5G, D5C

D5K, XL LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

USE WITH REAR SPROCKET GUARD

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 286-1858
Guard Assembly 2 286-1859
Bolt (12 mm) 24 8T-4184
Spacer 24 145-5181
Bolt (12 mm) (Guard to Front Guide) 8 8T-4139
Washer 8 5P-1076
Bolt (M16) (Guard to Rear Guard) 4 7X-2553
Washer 4 8T-4122
Bolt (M12) (Guard to Rear Guard) 4 8T-4176
Washer 4 7X-0550

D5G XL LGP TRACK ROLLER GUARDS (FULL LENGTH)

USE WITH REAR SPROCKET GUARD

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 183-2381
Guard Assembly 2 183-2382
Bolt (12 mm) 20 8T-4956
Washer 20 2M-0849
Pipe 10 8Y-7125
Bolt (12 mm) 10 152-7146
Washer 20 8T-4223
Nut 10 8T-4244
Tab (Front) 4 8Y-3413
Bolt (10 mm) 4 8T-4136
Washer 4 8T-4121
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 180-7321
Bolt (12 mm) 8 8T-4184
Washer 8 5P-8245

304
 Low Sprocket Tractors
D5K, D5G, D5C

D5G XL/LGP SystemOne TRACK ROLLER GUARD (FULL LENGTH)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 276-1680
Guard Assembly 2 276-1681
Bolt (12 mm) (Guard As. to Frame) 20 8T-4956
Washer 20 2M-0849
Pipe 10 8Y-7125
Bolt (12 mm) 10 152-7146
Washer 20 8T-4223
Nut 10 8T-4244
Bolt (10 mm) (Guard As. To Front Guard) 4 8T-4195
Washer 4 8T-4121
Plate (Rear) 4 276-1718
Plate (Rear Threaded Holes) 4 180-7321
Bolt (12 mm) 8 8T-4184
Washer 8 5P-8245

D5C STD, D5C LGP TRACK ROLLER GUARDS (FULL LENGTH)

6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 138-1934
Guard Assembly 2 138-1935
Bolt (1/2") 16 8T-8917
Washer 16 8T-4223
Pipe 8 8Y-7125
Bolt (1/2") 8 8S-3887
Nut 8 6V-8188
Washer 8 8T-4223
Tab (Front) 4 8Y-3413
Bolt (3/8") 4 4L-6454
Washer 4 8T-4896
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 138-1945
Bolt (1/2") 8 8T-8919
Washer 8 5P-8245

305
Low Sprocket Tractors
D5K, D5G, D5C

D5C XL TRACK ROLLER GUARDS (FULL LENGTH)

7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 138-9696
Guard Assembly 2 138-9697
Bolt (1/2") 20 8T-8917
Washer 20 8T-4223
Pipe 10 8Y-7125
Bolt (1/2") 10 8S-3887
Nut 10 6V-8188
Washer 10 8T-4223
Tab (Front) 4 8Y-3413
Bolt (3/8") 4 4L-6454
Washer 4 8T-4896
Plate (Rear) 4 138-1946
Plate (Rear Threaded Holes) 4 138-1945
Bolt (1/2") 8 8T-8919
Washer 8 5P-8245

D5C TRACK ROLLER GUARDS

FULL LENGTH

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8Y-7120
Guard Assembly 2 8Y-7121
Pipe 10 8Y-7125
Bolt 20 8T-8917
Bolt 10 8S-3887
Bolt 8 4L-6454
Washer 8 8T-4896
Washer 30 8T-4223
Nut 10 6V-8188
Tab 8 8Y-3413

D5K XL/LGP CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 282-3679
Bolt (12mm) 8 8T-4194
Nut 8 198-4778

306
 Low Sprocket Tractors
D5K, D5G, D5C

D5K XL/LGP SystemOne CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 276-1755
Bolt (12mm) 8 8T-4194
Nut 8 198-4778

D5G XL/LGP SystemOne CENTER GUIDING GUARDS

REQUIRED WITH CENTER TREAD IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 279-1695
Bolt (12mm) 8 8T-4194
Nut 8 198-4778

D5K XL, LGP IDLER GUARDS

CONVENTIONAL IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Bracket Assembly (To Frame) 2 305-1456
Bracket Assembly (To Frame) 2 305-1458
Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192
Washer 8 7X-0584
Guard 2 305-1463
Plate 2 305-1464
Plate 2 305-1465
Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956
Washer 8 8T-4223
Plate 2 290-2700
Bolt (M10) 4 8T-4195
Washer 8 7X-7729
Nut (M10) 4 8T-4133
Bracket Assembly (Front) 2 305-1460
Bracket Assembly (Front) 2 305-1462
Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139
Bolt (M12) 8 8T-4184
Washer 12 8T-4223

307
 Low Sprocket Tractors
D5K, D5G, D5C

D5K XL, LGP SystemOne IDLER GUARDS

CENTER TREAD IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Bracket Assembly (To Frame) 2 305-1466
Bracket Assembly (To Frame) 2 305-1469
Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192
Washer 8 7X-0584
Guard 2 305-1474
Plate 4 305-1475
Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956
Washer 8 8T-4223
Plate 2 290-2700
Bolt (M10) 4 8T-4195
Washer 8 7X-7729
Nut (M10) 4 8T-4133
Bracket Assembly (Front) 2 305-1471
Bracket Assembly (Front) 2 305-1473
Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139
Bolt (M12) 8 8T-4184
Washer 12 8T-4223

D5C STD, D5C XL UPPER FRAME ROLLER FRAME GUARDS 1

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH) 1 8Y-8920
Roller Frame Guard (LH) 1 8Y-8921
Idler Guard 2 8Y-8799
Sprocket Guard 2 8Y-8800
Wiper Guard (RH) 1 8Y-8822
Wiper Guard (LH) 1 8Y-8823
Lug 20 8Y-6640
Bracket 2 6S-6741
Bolt 42 5S-7379
Bolt 6 8T-8917
Washer 42 5P-1075
Washer 6 8T-4223
1This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the
guarding us to shed material and prevent its entry into the undercarriage system (link box area).

308
 Low Sprocket Tractors
D5K, D5G, D5C

D5C LGP UPPER FRAME ROLLER FRAME GUARDS 1

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard (RH) 1 8Y-8948
Roller Frame Guard (LH) 1 8Y-8949
Idler Guard 2 8Y-8799
Sprocket Guard 2 8Y-8800
Wiper Guard (RH) 1 8Y-8822
Wiper Guard (LH) 1 8Y-8823
Lug 20 8Y-6640
Bracket 2 6S-6741
Bolt 42 5S-7379
Bolt 6 8T-8917
Washer 42 5P-1075
Washer 6 8T-4223
1This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the
guarding us to shed material and prevent its entry into the undercarriage system (link box area).

D5G XL/LGP UPPER FRAME ROLLER FRAME GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard Assembly (RH) 1 174-6977
Roller Frame Guard Assembly (LH) 1 174-6978
Guard 2 176-1281
Cover Group 2 198-3378
Bolt (M10) 16 8T-4136
Bolt (10M) 16 8T-4137
Washer 32 8T-4121

D5G XL/LGP SystemOne UPPER FRAME ROLLER FRAME GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Roller Frame Guard Assembly (RH) 1 174-6977
Roller Frame Guard Assembly (LH) 1 174-6978
Guard 2 252-1578
Bracket Assembly 2 265-0940
Cover Group 2 198-3378
Bolt (M10) 24 8T-4136
Bolt (10M) 12 8T-4137
Washer 36 8T-4121

309
Low Sprocket Tractors
D5K, D5G, D5C

D5G, D5C IDLER ROCK GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly (RH) 2 105-0929
Guard Assembly (LH) 2 105-0930
Bolt (1/2 ") 16 5P-2566
Washer 16 7X-0584

310
 Low Sprocket Tractors
D6K

D6K XL/LGP SystemOne TRACK

PRESS FIT MASTER
FBH, DHA
7.50" (190.5 mm) PITCH --18 mm BOLT

PART
QUANTITY NUMBER
Link Assembly - 40 Section 2 311-6644
Components of Link Assembly
Link Box Standard 20 311-6643
Standard Link 38 235-2529
1
Standard Link (Press Fit) 2 235-2529
Track Hardware 1
Bolt (M18) 160 238-0472
Nut 160 238-0473
1 Not part of link assembly; required to assemble track group.

D6K SystemOne TRACK SHOES

7.50" (190.5 mm) PITCH --18 mm BOLT

PART
TYPE WIDTH NUMBER
Moderate Service 20.0" (510 mm) 235-2554
Moderate Service (Center Hole) 20.0" (510 mm) 289-3085
Moderate Service 22.0" (560 mm) 235-2533
Moderate Service 24.0" (610 mm) 277-2239
Moderate Service 30.0" (760 mm) 235-2534
Extreme Service 20.0" (510 mm) 277-2238
Extreme Service 22.0" (560 mm) 246-5727
Extreme Service 24.0" (610 mm) 277-2240
Extreme Service 30.0" (760 mm) 246-5726
Self Cleaning 30.3" (770 mm) 241-7870

D6K SystemOne SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket (27 Tooth) 1 255-8095
Bolt (5/8") 27 3S-8182
Nut 27 7H-3607

311
 Low Sprocket Tractors
D6K

D6K SystemOne SPROCKETED CENTER TREAD IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group - Sprocketed 2 239-8211
Components of Group
Idler Assembly 1 243-5322
Bearing 2 243-5321
Seal -- Duo-Cone Group 2 148-3533
Toric Ring 2 148-3531
Seal -- Shaft O-Ring 2 7F-8267
Plug 1 9W-2146

D6K SystemOne CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 235-5974

D6K SystemOne TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group 14 240-8933
1
Mounting Hardware
Cap 2 218-4993
Bolt (16 mm) 4 137-3301
Washer 4 9X-8268
1 These components are not included in the roller group; quantities shown are required to mount each roller.

D6K SystemOne ENDING GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 215-1574
Bolt (M16) 12 8T-4140
Spacer 12 204-6365

312
 Low Sprocket Tractors
D6K

D6K SystemOne ENDING GUIDING GUARDS (REAR SPROCKET)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 261-2082
Guard Assembly 2 261-2083
Bolt (M16) 8 8T-4140
Spacer 8 204-6365
Bolt (M16) 4 8T-4174
Washer 4 9X-8257
Sheet Assembly (Outer RH) 1 251-8532
Sheet Assembly (Inner RH) 1 251-8531
Sheet Assembly (Outer LH) 1 271-6080
Sheet Assembly (Inner LH) 1 271-6081
Bolt (M12) (Sheet As. to Guard As.) 4 8T-4194
Washer 4 198-4778
Bolt (M12) 4 8T-4183
Washer 4 8T-4223
Bolt (M12) (Sheet As. to Sheet As.) 2 8T-5092
Washer 2 198-4778

D6K SystemOne CENTER GUIDING GUARDS

LEVEL ONE GUIDING
Position guard over roller 4

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 251-8580
Bolt (M16) 8 8T-4140
Spacer 8 204-0365

D6K SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING
Position guard over rollers 2 & 5

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 251-8580
Bolt (M16) 16 8T-4140
Spacer 16 204-0365

313
Low Sprocket Tractors
D6K

D6K SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

LEVEL THREE GUIDING

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 261-2070
Bolt (M16) 20 8T-4140
Spacer 20 204-6365
Bolt (M16) 6 8T-6382
Tube 6 271-6033
Washer 12 9X-8257
Locknut 6 8T-4778

314
 Low Sprocket Tractors
D4

D4 SEALED AND LUBRICATED TRACK

CURRENT MODEL
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART 35 36 37 40
NUMBER SECTION SECTION SECTION SECTION
Link Assembly -- (Quantity 2) 154-3652 154-3656 -- 1 154-3657
Components of Link Assembly
Track Links
RH Pin End Master 1V-4603 1 1 1 1
LH Pin End Master 1V-4604 1 1 1 1
RH Bushing End Master 1V-4605 1 1 1 1
LH Bushing End Master 1V-4606 1 1 1 1
RH Regular 9K-6629 34 35 36 39
LH Regular 9K-6628 34 35 36 39
Other Components
Pin 154-3664 2 35 36 37 40
Bushing 7T-4628 35 36 37 40
Seal Assembly (Rigid) 250-4004 70 72 74 80
Thrust Ring 1V-3361 70 72 74 80
Stopper 5G-2247 35 36 37 40
Plug 6Y-0473 35 36 37 40
3
Track Hardware
Bolt 7H-3597 136 140 144 156
Nut 1M-1408 136 140 144 156
Master Bolt 3P-2274 4 4 4 4
Special Sets/Groups
Bushing and Seal Group (40 Sections) 154-3654 1 1 1 1
Seal Set (80 Seal Assemblies) 252-7862 1 1 1 1
1 Order 36 section 154-3656 or 40 section 154-3657 link assembly and add or remove appropriate number of sections.
2 Former Pin 9K-8550 (Use 9G-1642 Stopper)
3 Not part of link assembly; required to assemble track group.

315
 Low Sprocket Tractors
D4

D4 SEALED TRACK
CURRENT MODEL
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X
6.75" (171.5mm) PITCH -- 5/8" BOLT

PART 35 36 37 40
NUMBER SECTION SECTION SECTION SECTION
Link Assembly (Quantity 2) -- 1 1V-7072 -- 2 1V-7075
Components of Link Assembly
Track Links
RH Pin End Master 1V-4603 1 1 1 1
LH Pin End Master 1V-4604 1 1 1 1
RH Bushing End Master 1V-4605 1 1 1 1
LH Bushing End Master 1V-4606 1 1 1 1
RH Regular 9K-6629 34 35 36 39
LH Regular 9K-6628 34 35 36 39
Other Components
Pin 9K-4060 35 36 37 40
Bushing 9K-4061 35 36 37 40
Seal 7K-2018 140 144 148 160
Track Hardware 3
Bolt 7H-3597 136 140 144 156
Nut 1M-1408 136 140 144 156
Master Bolt 3P-2274 4 4 4 4
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1V-8623 1 1 1 1
1 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and remove appropriate number of sections.
2 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and add or remove appropriate number of sections.
3 Not part of link assembly; required to assemble track group.

316
 Low Sprocket Tractors
D4

D4 SEALED TRACK
ONE PIECE MASTER LINK
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X
6.75" (171.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 35 Section 2 -- 1
Components of Link Assembly
Track Links
RH Master (Full) 1 9K-0029
LH Master (Full) 1 9K-0028
RH Regular 34 9K-6629
LH Regular 34 9K-6628
Other Components
Pin 34 9K-4060
Master Pin 1 9K-4062
Bushing 34 9K-4061
Master Bushing 1 7K-2020
Seal 140 7K-2018
Spacer 2 9K-4059
2
Track Hardware
Bolt 140 7H-3597
Nut 140 1M-1408
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 1V-8623
1 If 35, 36, 37, 40 section link assemblies are required order 1V-7072 or 1V-7075 link assemblies and add or remove appropriate number of
sections.
2 Not part of link assembly; required to assemble track group.

317
 Low Sprocket Tractors
D4

D4 TRACK
LARGE O.D. BUSHING
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X
6.75" (171.5 mm) PITCH -- 9/16" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 7K-2049 1
Components of Link Assembly
Track Links
RH Regular 36 7K-1825
LH Regular 36 7K-1826
Other Components
Pin 35 4B-6166
Master Pin 1 4K-3919
Bushing 35 7K-2019
Master Bushing 1 7K-2020
Seal (Sealed Track) 144 7K-2018
Spacer 2 7K-2016
Track Hardware 2
Bolt 144 4K-7038
Nut 144 7K-2017
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 3V-2712
1 If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 7K-2049 link assemblies and add or remove appropriate number of
sections.
2 Not part of link assembly; required to assemble track group.

318
 Low Sprocket Tractors
D4

D4 TRACK
SMALL O.D. BUSHING
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X
6.75" (171.5 mm) PITCH -- 9/16" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 -- 1
Components of Link Assembly
Track Links
RH Regular 36 5K-9457
LH Regular 36 5K-9458
Other Components
Pin 35 4B-6166
Master Pin 1 4K-3919
Bushing 35 4K-3918
Master Bushing 1 4M-0740
Seal (Sealed Track) 144 5K-2707
Spacer 2 4K-3916
Track Hardware 2
Bolt 144 4K-7038
Nut 144 7K-2017
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 3V-2711
1 If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, upgrade to 7K-2049 or 7K-2051 link assemblies and add or remove
appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

319
 Low Sprocket Tractors
D4

D4 TRACK
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X
6.75" (171.5 mm) PITCH -- 1/2" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 4K-7128 1
Components of Link Assembly
Track Links
RH Regular 36 5K-9423
LH Regular 36 5K-9424
Other Components
Pin 35 4B-6166
Master Pin 1 4K-3919
Bushing 35 4K-3918
Master Bushing 1 4M-0740
Seal 144 5K-2707
Spacer 2 4K-3916
Track Hardware 2
Bolt 144 8H-7504
Nut 144 8H-5724
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 3V-2711
1 . If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 4K-7128 link assemblies and add or remove appropriate number of
sections.
2 Not part of link assembly; required to assemble track group.

D4 TRACK SHOES
6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 20.0" (510 mm) 2V-3819 5V-2906
Extreme Service 24.0" (610 mm) 1V-7069 --
Moderate Service 13.0" (330 mm) 206-3507 206-3515
Moderate Service 16.0" (405 mm) 206-3509 206-3517
Moderate Service 18.0" (460 mm) 206-3510 206-3518
Moderate Service 20.0" (510 mm) 206-3511 206-3519
Moderate Service 24.0" (610 mm) 206-3512 206-3520
Moderate Service 30.0" (760 mm) 206-3514 206-3522
Double Grouser 13.0" (330 mm) 8E-4807 8E-4808
Double Grouser 14.0" (355 mm) 8E-4805 6I-8780
Double Grouser 18.0" (460 mm) 8E-4799 8E-4800
Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 1
Self Cleaning 30.0" (760 mm) 1V-5092 1V-5090
Self Cleaning (Offset) 43.0" (1100 mm) 8Z-1462 8Z-1461
1 Double Grouser Master

320
 Low Sprocket Tractors
D4

D4 TRACK SHOES
6.75" (171.5 mm) PITCH -- 9/16" BOLT

PART
TYPE WIDTH NUMBER
Moderate Service 16.0" (405 mm) 206-3504
Moderate Service 18.0" (460 mm) 206-3505
Moderate Service 20.0" (510 mm) 206-3506
Triple Grouser 13.0" (330 mm) 5K-8566
Triple Grouser 14.0" (355 mm) 7K-1548
Triple Grouser (Center Punched Slots) 24.0" (610 mm) 6K-1981
Self Cleaning 25.0" (635 mm) 6S-8094
Self Cleaning 30.0" (760 mm) 1V-5091

D4 TRACK SHOES
6.75" (171.5 mm) PITCH -- 1/2" BOLT

PART
TYPE WIDTH NUMBER
Moderate Service 16.0" (405 mm) 206-3502
Rubber 13.0" (330 mm) 5F-3926 1
1 Requires 3B-2182 Adapter.

D4 SPROCKETS
67A, 78A, 85A, 86A, 88A, 22C, 44H, 69K, 7R, 18J, 20J, 49J, 58J, 69J, 60J, 61J, 65J, 82J, 83J
6.75" (171.5 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Assembly (29 Tooth) 1 4V-4106
Rim (Weld-On) (29 Tooth) 1 4V-4107

D4 SPROCKETS
24A, 55A, 78A, 86A, 88A
6.75" (171.5 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Assembly (29 Tooth) 1 5V-3842
Rim (Weld-On) (29 Tooth) 1 4V-4107

321
 Low Sprocket Tractors
D4

D4 SPROCKETS
2T, 5T, 6U, 7U, 12A, 26A, 29A, 30A
6.75" (171.5 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Rim (Weld-On) (27 Tooth) 1 5H-9107

D4 IDLERS
STRAIGHT SHAFT, 9K BLOCKS
67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly (Large O.D.) -1 1M-8867
Idler Assembly (Small O.D.) -1 3K-2866
Other Components (Per Idler)
Bushing Assembly 2 1V-9611
Bearing 2 1 7K-1089
Shaft 1 8E-7899
Bearing Block 1 9K-8857
Bearing Block 1 9K-9113
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Bolt 24 1A-2029
Washer 24 3B-4506
Plug 1 6Y-0473
Stopper 1 7G-4332
Lock 1 5M-5000
Bolt 1 0T-0772
Washer 1 4K-9943
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
1 Either 2 large or small O.D. idlers required per machine.
2 Component of preceding group; quantity shown is the quantity per group.

322
 Low Sprocket Tractors
D4

D4 IDLERS
STEPPED SHAFT, 4K BLOCKS
67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly (Large O.D.) -1 1M-8867
1
Idler Assembly (Small O.D.) - 3K-2866
Other Components (Per Idler)
Bushing Assembly 2 1V-9611
2
Bearing 1 7K-1089
Shaft 1 4K-9984
Bearing Block 1 4K-5285
Bearing Block 1 4K-5286
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 4F-7952
Seal -- Plug 1 1S-8947
Bolt 24 0S-1588
Washer 24 3B-4506
Plug 1 2P-0347
Lock 1 5M-5000
Bolt 1 0T-0772
Washer 1 4K-9943
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 2 2 2S-2181
1 Either 2 large or small O.D. idlers required per machine.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

323
 Low Sprocket Tractors
D4

D4 IDLERS
STEPPED SHAFT, 1M BLOCKS
6U, 7U, 59J, 44H, 60J, 82J, 83J, 84J, 27X, 28X, 29X

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly (Large O.D.) -1 --
1
Idler Assembly (Small O.D.) - --
Other Components (Per Idler)
Bushing Assembly 2 1V-9611
2
Bearing 1 7K-1089
Shaft 1 3K-6620
Bearing Block 1 1M-8863
Bearing Block 1 1M-8864
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 4F-7952
Seal -- Plug 1 1S-8947
Bolt 24 0S-1588
Washer 24 3B-4506
Plug 1 2P-0347
Lock 1 5M-5000
Bolt 1 0T-0772
Washer 1 4K-9943
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 2 2 2S-2181
1 Either 2 large or small O.D. idlers required per machine.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

324
 Low Sprocket Tractors
D4

D4 IDLERS
STEPPED SHAFT, 2M BLOCKS
29A, 30A, 6U, 7U

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly (Large O.D.) -1 --
1
Idler Assembly (Small O.D.) - --
Other Components (Per Idler)
Bushing Assembly 2 1V-9611
2
Bearing 1 7K-1089
Shaft 1 3K-6620
Bearing Block 1 2M-6007
Bearing Block 1 2M-6008
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 4F-7952
Seal -- Plug 1 1S-8947
Bolt 24 0S-1588
Washer 24 3B-4506
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 2 2 2S-2181
1 Either 2 large or small O.D. idlers required per machine.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

325
 Low Sprocket Tractors
D4

D4 CARRIER ROLLERS
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Plate 1 6K-9860
Bolt 2 6V-4791
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
1
Toric Ring 1 2S-2181
1 Component of preceding group; quantity shown is the quantity per group.

326
 Low Sprocket Tractors
D4

D4 TRACK ROLLERS
24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,
83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 6 118-1609
Single Flange (SF) 4 118-1608
Components of Group
Roller Shell (DF) 1 9P-7786
Roller Shell (SF) 1 9P-7782
Bushing Assembly 2 1V-9611
Bushing Assembly (.040" Oversize) 2 7K-1089
Shaft 1 118-1610 1
End Collar 2 118-1616 2
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 3 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 4
Bolt 4 1A-1135
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 3 2 2S-2181
Seal -- Bushing O-Ring 2 5K-1770
Seal -- Shaft O-Ring 2 8M-5661
1 Replaces former 3K-6616 shaft; requires 2 -- 118-1616 end collars.
2 If 3K-6616 shaft is used, use 2 -- 5K-7187 end collars.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

327
Low Sprocket Tractors
D4

D4 END GUIDING GUARDS

18J, 61J, 66J, 67J, 82J, 7R, 27X, 28X, 29X, 84J850-UP

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 7K-2944
Wear Strip 1 5V-3875
Bolt 4 031-0221
Front (Outer RH, Inner LH)
Guard Assembly 1 7K-2943
Wear Strip 1 5V-3875
Bolt 4 031-0221
Rear (Outer RH)
Guard Assembly 1 7K-2961
Wear Strip 1 5V-3876
Bolt 4 031-0221
Rear (Outer LH)
Guard Assembly 1 7K-2962
Wear Strip 1 5V-3876
Bolt 4 031-0221

D4 END GUIDING GUARDS

39A, 40A, 78A, 22C, 20J, 83J, 84J1-849

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 5K-7128
Front (Outer RH, Inner LH)
Guard Assembly 1 5K-7129
Rear (Outer RH)
Guard Assembly 1 5K-7141
Rear (Outer LH)
Guard Assembly 1 5K-7142

328
 Low Sprocket Tractors
D4

D4 TRACK ROLLER GUARDS

FULL LENGTH
39A, 40A, 78A, 22C, 20J, 82J, 83J, 84J

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 1M-7795
Inner LH 1 1M-7796
Outer RH 1 1M-7749
Outer LH 1 1M-7750
Bolt 34 0S-1594
Washer 34 3B-4510
Pipe 6 3V-7851
Nut 6 6B-6682
Washer 12 3B-4512

D4 TRACK ROLLER GUARDS

PARTIAL
18J, 61J, 66J, 67J, 7R

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 1V-4268
Inner LH 1 1V-4266
Outer RH 1 1V-4269
Outer LH 1 1V-4267
Bolt 10 5K-7144
Nut 10 7B-1756
Spacer 10 5K-7247
Bolt 24 5K-7138
Retainer 6 4K-7348
Bolt 12 5K-7143
Washer 12 4B-4280

329
Low Sprocket Tractors
D4

D4 TRACK ROLLER GUARDS

PARTIAL
39A, 40A, 78A, 22C, 20J, 82J, 83J, 84J

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 5K-7315
Inner LH 1 5K-7316
Outer RH 1 5K-7305
Outer LH 1 5K-7306
Bolt 10 5K-7144
Nut 10 7B-1756
Spacer 10 5K-7247
Bolt 20 5K-7138
Retainer 6 4K-7348
Bolt 12 5K-7143
Washer 12 4B-4280

D4 CENTER GUIDING GUARDS

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 1 7K-4438
Wear Strip 2 7V-3687
Bolt 4 6K-0137
Lock Washer 4 4D-3704
Bolt 8 031-0221
Spacer 4 9M-7783

330
 Low Sprocket Tractors
D5, 561

D5 SEALED AND LUBRICATED TRACK

SPLIT MASTER LINKS, CURRENT MODEL
51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART 38 39 43 46
NUMBER Section Section Section Section
Link Assembly -- (2 Quantity) -- 1 154-3672 -- 1 154-3676
Components of Link Assembly
Track Links
RH Pin End Master 3P-3043 1 1 1 1
LH Pin End Master 3P-3044 1 1 1 1
RH Bushing End Master 3P-3045 1 1 1 1
LH Bushing End Master 3P-3046 1 1 1 1
RH Regular 3P-7153 37 38 42 45
LH Regular 3P-7154 37 38 42 45
Other Components
Pin 160-7818 2 38 39 43 46
Bushing 7T-4636 38 39 43 46
Seal Assembly (Rigid) 250-3990 76 78 86 92
Thrust Ring 3P-3878 76 78 86 92
Stopper 5G-2247 38 39 43 46
Plug 6Y-0473 38 39 43 46
3
Track Hardware
Bolt 7H-3597 148 152 168 180
Nut 1M-1408 148 152 168 180
Master Bolt 3P-2274 4 4 4 4
Special Sets/Groups
Bushing and Seal Group (46 Sections) 154-3659 1 1 1 1
Seal Set (92 Seal Assemblies) 252-7859 1 1 1 1
1 Order 154-3672 or 154-3676 link assemblies and add or remove appropriate number of sections.
2 Former pin 3P-3880 (Use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

331
 Low Sprocket Tractors
D5, 561

D5 SEALED TRACK
SPLIT MASTER LINKS, CURRENT MODEL
51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART 38 39 43 46
NUMBER Section Section Section Section
Link Assembly -- (2 Quantity) -- 1 3P-5757 -- 1 3P-5762
Components of Link Assembly
Track Links
RH Pin End Master 3P-3043 1 1 1 1
LH Pin End Master 3P-3044 1 1 1 1
RH Bushing End Master 3P-3045 1 1 1 1
LH Bushing End Master 3P-3046 1 1 1 1
RH Regular 3P-7153 37 38 42 45
LH Regular 3P-7154 37 38 42 45
Other Components
Pin 6B-5502 38 39 43 46
Bushing 5S-0710 38 39 43 46
Seal 5S-0709 152 156 172 184
Track Hardware 2
Bolt 7H-3597 148 152 168 180
Nut 1M-1408 148 152 168 180
Master Bolt 3P-2274 4 4 4 4
Special Sets/Groups
Pin and Bushing Group (38 Sections) 6P-4234 1 1 1 1
1 Order 3P-5757 or 3P-5762 link assemblies and add or remove appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

332
 Low Sprocket Tractors
D5, 561

D5 SEALED TRACK
SEALED ONE PIECE MASTER LINKS, FORMER MODEL
51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 46 Section -- -- 1
Components of Link Assembly
Track Links
RH Master (Full) 1 3P-7155
LH Master (Full) 1 3P-7156
RH Regular 45 3P-7153
LH Regular 45 3P-7154
Other Components
Pin 45 6B-5502
Master Pin 1 8M-7456
Bushing 45 5S-0710
Master Bushing 1 5S-0753
Seal 184 5S-0709
Spacer 2 5S-0754
2
Track Hardware
Bolt 184 7H-3597
Nut 184 1M-1408
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4234
1 If 38, 39, 43, 46, section link assemblies are required, upgrade to 3P-5757 or 3P-5762 and add or remove appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

333
 Low Sprocket Tractors
D5, 561

D5 EXTENDED WEAR LIFE TRACK 1

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 39 Section 2 154-3662 2
Components of Link Assembly
Track Links
RH Pin End Master 1 7T-4541
LH Pin End Master 1 7T-4542
RH Bushing End Master 1 7T-4543
LH Bushing End Master 1 7T-4544
RH Regular 38 7T-4539
LH Regular 38 7T-4540
Other Components
Pin 39 160-7818 3
Bushing 39 7T-4636
Seal Assembly (Rigid) 78 250-3990
Thrust Ring 78 3P-3878
Stopper 39 5G-2247
Plug 39 6Y-0473
4
Track Hardware
Bolt 152 7H-3597
Nut 152 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 154-3659
Seal Set (92 Seal Assemblies) 1 252-7859
1 Note: Extended Wear Life Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler section for details.
2 If 38, 43, 46, section link assemblies are required order 154-3662 and add or subract appropriate number of sections.
3 Former pin 3P-3880 (Use 9G-1642 stopper).
4 Not part of link assembly; required to assemble track group.

334
 Low Sprocket Tractors
D5, 561

561 SEALED TRACK

SPLIT MASTER LINK, CURRENT MODEL
85H, 92J, 54X
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 39 Section 2 3P-5757
Components of Link Assembly
Track Links
RH Pin End Master 1 3P-3043
LH Pin End Master 1 3P-3044
RH Bushing End Master 1 3P-3045
LH Bushing End Master 1 3P-3046
RH Regular 38 3P-7153
LH Regular 38 3P-7154
Other Components
Pin 39 6B-5502
Bushing 39 5S-0710
Seal (Spring Washer) 156 5S-0709
Track Hardware 1
Bolt 152 7H-3597
Nut 152 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4234
1 Not part of link assembly; required to assemble track group.

335
 Low Sprocket Tractors
D5, 561

561 SEALED TRACK

ONE PIECE MASTER LINKS, FORMER MODEL
85H, 92J, 54X
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 39 Section 2 -- 1
Components of Link Assembly
Track Links
RH Master (Full) 1 3P-7155
LH Master (Full) 1 3P-7156
RH Regular 38 3P-7153
LH Regular 38 3P-7154
Other Components
Pin 38 6B-5502
Master Pin 1 8M-7456
Bushing 38 5S-0710
Master Bushing 1 5S-0753
Seal (Spring Washer) 156 5S-0709
Spacer 2 5S-0754
2
Track Hardware
Bolt 156 7H-3597
Nut 156 1M-1408
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4234
1 Upgrade to 3P-5757 link assembly.
2 Not part of link assembly; required to assemble track group.

336
 Low Sprocket Tractors
D5, 561

561 SEALED TRACK

62A
6.75" (171.5 mm) PITCH - 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 2S-7579
Components of Link Assembly
Track Links
RH Regular 40 2S-5959
LH Regular 40 2S-5960
Other Components
Pin 39 6B-5502
Master Pin 1 8M-7456
Bushing 39 8M-7457
Master Bushing 1 2A-3241
Seal (Spring Washer) 160 8M-7454
Spacer 2 8M-7455
1
Track Hardware
Bolt 160 7H-3597
Nut 160 1M-1408
1 Not part of link assembly; required to assemble track group.

337
 Low Sprocket Tractors
D5, 561

D5, 561 TRACK SHOES

6.91" (175.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Moderate Service 15.0" (380 mm) 9K-3028 4V-7410
Moderate Service 16.0" (405 mm) 5S-0820 3P-3888
Moderate Service 18.0" (460 mm) 5S-0821 3P-3889
Moderate Service 20.0" (510 mm) 5S-0822 3P-3890
Moderate Service 22.0" (560 mm) 5S-0823 3P-3891
Moderate Service 24.0" (610 mm) 7S-0706 3P-3892
Moderate Service 28.0" (710 mm) 8S-2548 3P-3893
Moderate Service 30.0" (760 mm) 8S-0377 3P-3894
Moderate Service 34.0" (865 mm) 7S-9567 3P-3896
Double Grouser 14.0" (355 mm) 8E-4727 8E-4728
Double Grouser 15.0" (380 mm) 8E-4724 8E-4725
Double Grouser 19.7" (500 mm) 8E-4722 8E-4723
Double Grouser 22.0" (560 mm) 8E-4729 3P-3891 1
2
Triple Grouser 13.7" (348 mm) 9G-6389 8E-4728 3
Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 3
2
Triple Grouser 15.0" (380 mm) 6K-1910 8E-4725 3
Triple Grouser 2 18.0" (460 mm) 8S-2981 8E-4723 4
Self Cleaning 34.0" (865 mm) 3P-3898 3P-3897
1 Moderate Service Shoe
2 Center Punched.
3 Double Grouser Master (Non Center Punched).
4 19.7" (500 mm) Double Grouser Shoe (Trim 1"off each end), (Center Punched).

D5, 561 SPROCKETS

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 85H, 92J

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 5S-0726
Sprocket Segment (Tough Steel) (3 Tooth) 9 187-4845
Sprocket Segment (3 Tooth) 9 185-6151
Mud/Snow Segment 9 8P-9453
Adapter Ring 1 5S-0834
Rim 1 5S-4822
Bolt 27 3S-8182
Nut 27 7H-3607

338
 Low Sprocket Tractors
D5, 561

561 SPROCKET
62A
6.75" (171.5 mm) - PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Assembly ( 28 Tooth) 1 8M-6041
Rim ( 28 Tooth) 1 3H-2643

D5, 561 IDLERS

LARGE O.D.
51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, , 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 62A, 85H, 92J

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 8S-2560
Extended Wear Idler Assembly 1 2 7T-3501
Other Components
Bushing Assembly 2 3P-8272
Bearing 2 1 8P-6652
Shaft 1 5K-0305
Bearing Block 1 9G-8300
Bearing Block 1 9G-8301
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Seal -- Plug 1 1S-8947
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 2S-2182
Seal -- Shaft O-Ring 2 8M-5661
1 For use with Extended Wear Life Track
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

339
 Low Sprocket Tractors
D5, 561

D5, 561 IDLERS

SMALL O.D.
21J, 62J, 63J, 93J, 94J, 95J, 96J, 98J, 26X,

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 1M-3121
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 5K-0305
Bearing Block 1 3T-4427
Bearing Block 1 3T-4428
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Seal -- Plug 1 1S-8947
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 2S-2182
Seal -- Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

340
 Low Sprocket Tractors
D5, 561

D5, 561 CARRIER ROLLERS

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, , 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 62A, 85H, 92J

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Group 4 -- 1 5A-8374
Components of Group
Roller Shell 1 2S-0205 5A-8375
Shaft 1 5M-1914 3T-3207
Cup 2 1M-7911 9S-3581
Cone 2 1M-7912 9S-3582
Ring 1 1M-7914 1M-7914
Cover 1 5M-2043 5M-2043
Collar 1 1M-7918 9S-3567
Support 1 1M-7915 --
Plug 1 2P-0347 2P-0347
Bolt 3 0S-1594 0S-1594
Ring 1 1M-7916 --
Nut 1 1M-7913 --
Plate 1 -- 8P-6188
Bolt 2 -- 5K-9107
Seal -- Duo-Cone Group 1 9W-5224 6Y-0925
Toric Ring 2 2 1M-3097 8H-2262
Seal -- Cover 1 2H-6338 2H-6338
Seal -- Support 1 4H-9105 --
Seal -- Plug 1 1S-8947 1S-8947
Seal -- Shaft O-Ring 1 1H-9696 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 5K-6191 4S-8984
2
Toric Ring 2 2S-2181 9M-9730
1 Upgrade to 5A-8374 group.
2 Component of preceding group; quantity shown is the quantity per group.

341
 Low Sprocket Tractors
D5, 561

D5, 561 TRACK ROLLERS

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X,
43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 85H, 92J, 62A

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 118-1612
Single Flange (SF) 6 118-1611
2 1
Extended Wear Life (DF) 6 118-1633
2
Extended Wear Life (SF) 6 118-1632
Components of Group
Roller Shell (DF) 1 9S-9534
Roller Shell (SF) 1 9S-9535
Extended Wear Life Shell (DF) 2 1 9W-8350
Extended Wear Life Shell (SF) 2 1 9W-8353
Bushing Assembly 2 2P-8045
Bearing 3 1 8P-6652
Shaft 1 118-1613 4
End Collar 2 5M-0627 5
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 3 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
6
Mounting Hardware
Bolt 4 8S-9092 7
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 3 2 2S-2181
Seal -- Bushing O-Ring 2 2S-2182
Seal -- Shaft O-Ring 2 8M-5661
1 8 Double Flange Rollers required on LGP machines.
2 For use with Extended Wear Life Track
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Replaces former 5M-1915 shaft; requires 2 -- 5M-0627 end collars.
5 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.
6 These components are not included in the roller group; quantities shown are required to mount each roller.
7 Use 0S-1601 Bolt for serial numbers 95J1-472, 96J1-6031, 93J, 94J

342
 Low Sprocket Tractors
D5, 561

D5, 561 END GUIDING GUARDS

92J, 93J , 94J, 95J, 96J 97J, 98J, 12R, 6R, 68J, 23X 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 62J,
63J, 67J, 8MB, 21Y

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 9S-8359
Wear Strip 1 9S-8354
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Front (Outer RH, Inner LH)
Guard Assembly 1 9S-8358
Wear Strip 1 9S-8353
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Rear (Outer RH)
Guard Assembly 1 9S-8258
Wear Strip 1 9S-8245
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Rear (Outer LH)
Guard Assembly 1 9S-8257
Wear Strip 1 9S-8246
Bolt 4 7B-3235
Lock Washer 4 3B-4508

D5, 561 END GUIDING GUARDS

6R, 12R, 68J

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 3K-4222
Front (Outer RH, Inner LH)
Guard Assembly 1 3K-4221

343
Low Sprocket Tractors
D5, 561

D5 TRACK ROLLER GUARDS

FULL LENGTH
81H, 82H, 83H, 84H, 37J, 21J, 93J, 51H, 52H,

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7B-7889
Inner LH 1 7B-7890
Outer RH 1 7B-7891
Outer LH 1 7B-7892
Bolt 34 1A-8537
Washer 34 4D-3704
Spacer 34 3P-4134

D5, 561 TRACK ROLLER GUARDS

PARTIAL
81H, 82H, 83H, 84H, 85H, 12R, 6R, 68J, 92J, 93J, 94J, 95J, 96J, 97J, 6X, 49X286-UP, 62J, 63J, 67J, 22X, 23X,
24X, 25X, 43X, 44X, 47X, 48X, 62A, 8MB, 54X, 51H, 52H

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 5M-0633
Inner LH 1 5M-0634
Outer RH 1 5M-0635
Outer LH 1 5M-0636
Bolt 32 1B-4367
Washer 32 4D-3704
Spacer 32 3P-4134
Bolt 2 1A-1135
Lock Washer 2 3B-4510
Tube 6 2F-0023
Rod Assembly 6 --
Nut 6 1B-4206
Lock Washer 12 3B-4510

344
 Low Sprocket Tractors
D5, 561

D5, 561 TRACK ROLLER GUARDS

PARTIAL HEAVY DUTY
81H, 82H, 83H, 84H, 85H, 12R, 6R, 68J, 92J, 93J, 94J, 95J, 96J, 97J, 6X, 49X286-UP, 62J, 63J, 67J, 22X, 23X,
24X, 25X, 43X, 44X, 47X, 48X, 62A, 8MB, 54X, 51H, 52H

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 3P-7874
Inner LH 1 3P-7873
Outer RH 1 6P-7097
Outer LH 1 6P-7100
Bolt 26 1A-8537
Spacer 26 3P-4134
Tube 8 4S-6559
Rod Assembly 8 --
Nut 8 1B-4206
Lock Washer 16 3B-4510
Retainer 6 2M-4668
Bolt 12 0S-1595
Washer 12 3B-4508

D5 CENTER GUIDING GUARDS

12R, 6R, 68J, 46X

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 1 5S-6513
Wear Strip 2 3V-1133
Bolt 8 6H-1717
Lock Washer 8 3B-4508
Bolt 4 1D-4585
Washer 4 4D-3704

D5, 561 FINAL DRIVE GUARDS

51H, 52H, 81H, 82H, 83H, 84H, 85H, 62J, 63J, 67J, 92J, 93J, 94J, 95J, 96J, 23X, 25X, 43X, 44X, 45X, 47X, 49X,
54X

PART
(PER MACHINE) QUANTITY NUMBER
Guard (RH) 1 7S-8214
Guard (LH) 1 7S-8213
Bolts 8 0V-0375
Washer 8 2M-0849

345
 Low Sprocket Tractors
D6

D6 SEALED AND LUBRICATED TRACK

HYBRID, SPLIT MASTER LINKS
10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART 36 39 41
NUMBER SECTION SECTION SECTION
Link Assembly 236-9861 236-9864 236-9866
Components of Link Assembly
Track Links
RH Pin End Master 228-2737 1 1 1
LH Pin End Master 228-2738 1 1 1
RH Bushing End Master 228-2739 1 1 1
LH Bushing End Master 228-2740 1 1 1
RH Regular 228-2735 35 38 40
LH Regular 228-2736 35 38 41
Other Components
Pin 160-7819 1 36 39 41
Bushing 230-4512 36 39 41
Seal Assembly (Rigid) 207-0544 72 78 82
Thrust Ring 152-8071 72 78 82
Stopper 5G-2247 36 39 41
Plug 6Y-0473 36 39 41
2
Track Hardware
Bolt 1S-1859 140 152 160
Nut 1S-1860 140 152 160
Master Bolt 9S-1838 4 4 4
Special Sets/Groups
Seal Set (90 Seal Assemblies) 256-9360 1 1 1
Bushing and Seal Group (37 Sections) 293-9147 1 1 1
1 Former pin 3P1108 (Use 9G1642 Stopper).
2 Not part of link assembly; required to assemble track group.

346
 Low Sprocket Tractors
D6

D6 SEALED AND LUBRICATED TRACK

FORMER SEALED AND LUBRICATED TRACK, SPLIT MASTER LINKS
10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ, BWJ, C6G, 3SR
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART 36 39 41
NUMBER SECTION SECTION SECTION
Link Assembly 180-0507 1 117-1020 2 180-0509 3
Components of Link Assembly
Track Links
RH Pin End Master 6Y-6743 1 1 1
LH Pin End Master 6Y-6744 1 1 1
RH Bushing End Master 6Y-6745 1 1 1
LH Bushing End Master 6Y-6746 1 1 1
RH Regular 3P-1112 35 38 40
LH Regular 3P-1113 35 38 41
Other Components
Pin 160-7819 4 36 39 41
5
Bushing 8E-5257 36 39 41
Seal Assembly (Rigid) 250-3996 72 78 82
Thrust Ring 3P-1104 72 78 82
Stopper 5G-2247 36 39 41
Plug 6Y-0473 36 39 41
6
Track Hardware
Bolt 1S-1859 140 152 160
Nut 1S-1860 140 152 160
Master Bolt 9S-1838 4 4 4
Special Sets/Groups
Bushing and Seal Group (36 Sections) 6I-8061 1 1 1
Seal Set (86 Seal Assemblies) 252-7857 1 1 1
1 Service replaced by 236-9861 hybrid link assembly.
2 Service replaced by 236-9864 hybrid link assembly.
3 Service replaced by 236-9866 hybrid link assembly.
4 Former pin 3P1108 (Use 9G1642 Stopper).
5 If small O.D. bushing is required, use 3P-1109.
6 Not part of link assembly; required to assemble track group.

347
 Low Sprocket Tractors
D6

D6 SEALED TRACK
HYBRID SPLIT MASTER LINKS
10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART 36 41
NUMBER SECTION SECTION
Link Assembly 238-9951 238-9954
Components of Link Assembly
Track Links
RH Pin End Master 228-2737 1 1
LH Pin End Master 228-2738 1 1
RH Bushing End Master 228-2739 1 1
LH Bushing End Master 228-2740 1 1
RH Regular 228-2735 35 40
LH Regular 228-2736 35 40
Other Components
Pin 4M-5989 36 41
Bushing 237-7305 36 41
Seal 8M-7231 144 164
Track Hardware 1
Bolt 1S-1859 140 160
Nut 1S-1860 140 160
Master Bolt 9S-1838 4 4
1 Not part of link assembly; required to assemble track group.

348
 Low Sprocket Tractors
D6

D6 SEALED TRACK
FORMER SEALED TRACK, SPLIT MASTER LINKS
10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART 36 41
NUMBER SECTION SECTION
Link Assembly 3P-1088 1 3P-5927 2
Components of Link Assembly
Track Links
RH Pin End Master 6Y-6743 1 1
LH Pin End Master 6Y-6744 1 1
RH Bushing End Master 6Y-6745 1 1
LH Bushing End Master 6Y-6746 1 1
RH Regular 3P-1112 35 40
LH Regular 3P-1113 35 40
Other Components
Pin 4M-5989 36 41
Bushing 4M-5991 36 41
Seal 8M-7231 144 164
Track Hardware 3
Bolt 1S-1859 140 160
Nut 1S-1860 140 160
Master Bolt 9S-1838 4 4
Special Sets/Groups
Pin and Bushing Group (36 Sections) 6P-4235 1 1
1 Service replaced by 238-9951 hybrid link assembly.
2 Service replaced by 238-9954 hybrid link assembly.
3 Not part of link assembly; required to assemble track group.

349
 Low Sprocket Tractors
D6

D6 SEALED TRACK
HYBRID, ONE PIECE MASTER LINKS
10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 238-9950
Components of Link Assembly
Track Links
RH Master 1 240-2503
LH Master 1 240-2504
RH Regular 35 228-2735
LH Regular 35 228-2736
Other Components
Pin 35 4M-5989
Master Pin 1 8E-0855
Bushing 35 237-7305
Master Bushing 1 237-7306
Seal (Spring Washer) 144 8M-7231
Spacer 2 8M-7290
1
Track Hardware
Bolt 144 1S-1859
Nut 144 1S-1860
1 Not part of link assembly; required to assemble track group.

350
 Low Sprocket Tractors
D6

D6 SEALED TRACK
FORMER, ONE PIECE MASTER LINKS
10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ
8.00" (203.2 mm) PITCH -- 3/4" BOLT

FORMER
QUANTITY PART NUMBER
Link Assembly -- 36 Section 2 -- 1
Components of Link Assembly
Track Links
RH Regular 36 3P-1112
LH Regular 36 3P-1113
Other Components
Pin 35 4M-5989
Master Pin 1 8E-0855
Bushing 35 4M-5991
Master Bushing 1 4M-5992
Seal 144 8M-7231
Spacer 2 8M-7290
Track Hardware 2
Bolt 144 1S-1859
Nut 144 1S-1860
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 6P-4235
1 For 36, 39, or 41 section link assemblies, upgrade to 238-9951 (36 Section) or 238-9954 (41 Section) hybrid link assembly and add or remove
appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

351
 Low Sprocket Tractors
D6

D6 EXTENDED WEAR LIFE TRACK 1

10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J,
47J, 55J, 69J, 99J, 2MJ, 8FJ
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 36 Section 2 117-1022 2
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-6747
LH Pin End Master 1 6Y-6748
RH Bushing End Master 1 6Y-6749
LH Bushing End Master 1 6Y-6750
RH Regular 35 7T-4645
LH Regular 35 7T-4646
Other Components
Pin 36 160-7819 3
Bushing 36 8E-5257 4
Seal Assembly (Rigid) 72 250-3996
Thrust Ring 72 3P-1104
Stopper 36 5G-2247
Plug 36 6Y-0473
5
Track Hardware
Bolt 140 1S-1859
Nut 140 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Bushing and Seal Group (36 Sections) 1 6I-8061
Seal Set (86 Seal Assemblies) 1 252-7857
1 Note: Extended Wear Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections for details.
2 Service replaced by 236-9861 hybrid link assembly. If 39, 41, section link assemblies are required refer to (D6 Sealed and Lubricated Track,
hybrid split master links) table.
3 Former pin 3P-1108 (Use 9G-1642 Stopper)
4 If small O.D. bushing is required, use 3P-1109.
5 Not part of link assembly; required to assemble track group.

352
 Low Sprocket Tractors
D6

D6D HEAVY DUTY TRACK 1

8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART 36 39 41
NUMBER SECTION SECTION SECTION
Link Assembly -- (Quantity 2) 142-1365 6I-9668 6I-9671
Components of Link Assembly
Track Links
RH Pin End Master 8E-7407 1 1 1
LH Pin End Master 8E-7408 1 1 1
RH Bushing End Master 8E-7409 1 1 1
LH Bushing End Master 8E-7410 1 1 1
RH Regular 8E-7405 35 38 40
LH Regular 8E-7406 35 38 40
Other Components
Pin 160-7820 2 36 39 41
Bushing 8E-7222 36 39 41
Seal Assembly (Rigid) 207-0544 72 78 82
Thrust Ring 152-8071 72 78 82
Stopper 5G-2247 36 39 41
Plug 6Y-0473 36 39 41
Track Hardware 3
Bolt 6V-1792 140 152 160
Nut 1S-1860 140 152 160
Master Bolt 9S-1838 4 4 4
Special Sets/Groups
Seal Set (90 Seal Assemblies) 256-9360 1 1 1
Bushing and Seal Group (39 Sections) 115-2440 1 1 1
1 When installing Heavy Duty Track on D6 machines, refer to IRM UC97-6 for installation and guarding information. The following are required:
New D6R/H Track Shoe.
New D6D Extended War life Idlers (7T-4562).
New D6D Extended War life Rollers or new D6R/H Roller Groups.
Track guides and guards reworked.
Recoil rod shortened.
2 Former pin 8E-7220 (Use 9G-1642 stopper).
3 Not part of the link assembly; required to assemble track group.

353
 Low Sprocket Tractors
D6

D6 TRACK
SPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75") 1
37A, 44A, 8U, 9U
6.91" (175.5 mm) PITCH -- 5/8" BOLT

SEALED PART SALT PART

QUANTITY NUMBER NUMBER
Link Assembly -- 38 Section 2 -- 2 -- 3
Components of Link Assembly
Track Links
RH Pin End Master 1 3P-3043 3P-3043
LH Pin End Master 1 3P-3044 3P-3044
RH Bushing End Master 1 3P-3045 3P-3045
LH Bushing End Master 1 3P-3046 3P-3046
RH Regular 37 3P-7153 3P-7153
LH Regular 37 3P-7154 3P-7154
Other Components
Pin 38 6B-5502 160-7818 4
Bushing 38 5S-0710 7T-4636
Seal 152 5S-0709 --
Seal Assembly (Rigid) 76 -- 250-3990
Thrust Ring 76 -- 3P-3878
Stopper 38 -- 5G-2247
Plug 38 -- 6Y-0473
5
Track Hardware
Bolt 148 7H-3597 7H-3597
Nut 148 1M-1408 1M-1408
Master Bolt 4 3P-2274 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 -- 154-3659
Pin and Bushing Group (38 Sections) 1 6P-4234 --
Seal Set (92 Seal Assemblies) 1 -- 252-7859
1 Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is not crictical. Shoe
bolt pattern is common between 6.75" and 6.91" pitch track.
2 Order 3P-5757 link assembly and remove one section.
3 Order 154-3672 link assembly and remove one section.
4 Former pin 3P-3880 (Use 9G-1642 Stopper)
5 Not part of the link assembly; required to assemble track group.

354
 Low Sprocket Tractors
D6

D6 TRACK
SPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75") 1
37A, 44A, 8U, 9U
6.91" (175.5 mm) PITCH -- 5/8" BOLT

SEALED PART SALT PART

QUANTITY NUMBER NUMBER
Link Assembly -- 39 Section 2 3P-5757 154-3672
Components of Link Assembly
Track Links
RH Pin End Master 1 3P-3043 3P-3043
LH Pin End Master 1 3P-3044 3P-3044
RH Bushing End Master 1 3P-3045 3P-3045
LH Bushing End Master 1 3P-3046 3P-3046
RH Regular 38 3P-7153 3P-7153
LH Regular 38 3P-7154 3P-7154
Other Components
Pin 39 6B-5502 160-7818 2
Bushing 39 5S-0710 7T-4636
Seal 156 5S-0709 --
Seal Assembly (Rigid) 78 - 250-3990
Thrust Ring 78 -- 3P-3878
Stopper 78 - 5G-2247
Plug 39 - 6Y-0473
3
Track Hardware
Bolt 152 7H-3597 7H-3597
Nut 152 1M-1408 1M-1408
Master Bolt 4 3P-2274 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 - 154-3659
Pin and Bushing Group (38 Sections) 1 6P-4234 --
Seal Set (92 Seal Assemblies) 1 - 252-7859
1 Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is not crictical. Shoe
bolt pattern is common between 6.75" and 6.91" pitch track.
2 Former pin 3P-3880 (Use 9G-1642 Stopper)
3 Not part of the link assembly; required to assemble track group.

355
 Low Sprocket Tractors
D6

D6 TRACK
SEALED ONE PIECE MASTER LINKS (REPLACEMENT TRACK FOR FORMER 6.75") 1
37A, 44A, 8U, 9U
6.91" (175.5 mm) PITCH -- 5/8" BOLT

FORMER
PART 38 39
NUMBER SECTION SECTION
Link Assembly -- (Quantity 2) -- 2 -- 3
Components of Link Assembly
Track Links
RH Master (Full) 3P-7155 1 1
LH Master (Full) 3P-7156 1 1
RH Regular 3P-7153 37 38
LH Regular 3P-7154 37 38
Other Components
Pin 6B-5502 37 38
Master Pin 8M-7456 1 1
Bushing 5S-0710 37 38
Master Bushing 5S-0753 1 1
Seal 5S-0709 152 156
Spacer 5S-0754 2 2
4
Track Hardware
Bolt 7H-3597 152 156
Nut 1M-1408 152 156
Special Sets/Groups
Pin and Bushing Group (38 Sections) 6P-4234 1 1
1 Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is not critical. Shoe
bolt pattern is common between 6.75" and 6.91"pitch tracks.
2 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) and remove one section.
3 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) link assembly.
4 Not part of the link assembly; required to assemble track group.

356
 Low Sprocket Tractors
D6

D6 TRACK SEALED
ONE PIECE MASTER LINKS
37A, 44A
6.75" (171.5 mm) 5/8" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 2S-7579
Components of Link Assembly
Track Links
RH Regular 40 2S-5959
LH Regular 40 2S-5960
Other Components
Pin 39 6B-5502
Master Pin 1 8M-7456
Bushing 39 8M-7457
Master Bushing 1 2A-3241
Seal (Spring Washer) 160 8M-7454
Spacer 2 8M-7455
1
Track Hardware
Bolt 160 7H-3597
Nut 160 1M-1408
1 Not part of link assembly; required to assemble track group.

357
 Low Sprocket Tractors
D6

D6 TRACK SHOES
8.00" (203.2 mm) PITCH -- 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392
Extreme Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4985 1Q-4984
Extreme Service 20.0" (510 mm) 6Y-6395 6Y-6394
Extreme Service 22.0" (560 mm) 6Y-6411 6Y-6412
Extreme Service 24.0" (610 mm) 6Y-6398 6Y-6397
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 3Q-5391 1 157-1374
Extreme Service 30.0" (760 mm) 6Y-6405 6Y-6404
Extreme Service 36.0" (915 mm) 6Y-6401 169-5867
Moderate Service 18.0" (460 mm) 6Y-6289 6Y-6290
Moderate Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4921 1Q-4922
Moderate Service 20.0" (510 mm) 6Y-6291 6Y-6292
Moderate Service 22.0" (560 mm) 6Y-6293 6Y-6294
Moderate Service 24.0" (610 mm) 6Y-6295 6Y-6296
Moderate Service 26.0" (660 mm) 6Y-6297 6Y-6298
Moderate Service 30.0" (760 mm) 6Y-6299 6Y-6300
Moderate Service 36.0" (915 mm) 196-1237 196-1236
Double Grouser 17.0" (430 mm) 8E-4501 8E-4502
Double Grouser 17.7" (450 mm) 8E-4494 8E-4495
Double Grouser 21.0" (530 mm) 8E-4499 8E-4500
Double Grouser 21.7" (550 mm) 8E-4496 8E-4497
Triple Grouser 17.0" (430 mm) 2V-5114 8E-4502 2
Self Cleaning 36.0" (915 mm) 3P-1134 3P-1133
1 Clipped Grouser
2 Double Grouser Master

D6 TRACK SHOES
6.91" (175.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Moderate Service 16.0" (405 mm) 5S-0820 3P-3888
Moderate Service 18.0" (460 mm) 5S-0821 3P-3889
Moderate Service 20.0" (510 mm) 5S-0822 3P-3890
Moderate Service 22.0" (560 mm) 5S-0823 3P-3891
Double Grouser 16.0" (405 mm) 8E-4727 8E-4728
Double Grouser 19.7" (500 mm) 8E-4722 8E-4723
Triple Grouser 1 15.0" (380 mm) 6K-1910 8E-4725 2
Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 2
Triple Grouser 18.0" (460 mm) 8S-2981 --
1 Slotted Holes
2 Double Grouser Master (Not Center Punched).

358
 Low Sprocket Tractors
D6

D6 SPROCKETS
74A, 76A, 82A, 83A, 71A, 73A, 41A, 23U, 24U, 69U, 46J, 47J, 55J, 69J, 49W, 74W, 75W, 8FJ, 2MJ, 10K, 17R, 3X,
4X, 5X, 6X, 19X, 20X
8.00" (203.2 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 8P-1851
Sprocket Segment (5 Tooth) 5 8E-4365
Mud/Snow Segment (5 Tooth) 5 8P-9454
Adapter Ring 1 4S-9004
Rim 1 9M-3818
Bolt 20 3S-8182
Nut 20 7H-3607

D6 SPROCKET
3/4" MOUNTING BOLTS
6HC

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 117-1616
Bolt 20 117-1617
Nut 20 7H-3608

D6 SPROCKETS
EARLY MACHINE
37A, 44A, 8U, 9U
6.91" (175.5 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 5S-0726
Sprocket Segment (3 Tooth) 9 185-6151
Mud/Snow Segment (3 Tooth) 9 8P-9453
Adapter Ring 1 5S-0834
Bolt 27 3S-8182
Nut 27 7H-3607

D6 SPROCKET
37A, 44A
6.75" (171.5 mm)

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Assembly (28 Tooth) 1 8M-6041
Rim (28 Tooth) 1 3H-2643

359
 Low Sprocket Tractors
D6

D6 IDLERS
CURRENT
41A, 71A, 73A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 1Y, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ,
8FJ, 10K

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 5M-5009
Extended Wear Idler Assembly 1 2 7T-4562
Other Components
Bushing Assembly 2 3P-1900
Bearing 2 1 8P-5197
Shaft 1 5M-5005
Bearing Block 1 5M-5003
Bearing Block 1 5M-5004
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 5F-8000
Seal -- Plug 1 1S-8947
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 2S-2182
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4436
1 For use with Extended Wear Life Track.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

360
 Low Sprocket Tractors
D6

D6 IDLERS
LARGE O.D., FORMER
8U10971-UP, 9U29219-UP

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Idler Assembly 2 8S-2560
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 5M-1913
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Bolt 12 0S-1587
Washer 12 3B-4508
Plug 1 2B-7408
Special Application Seals (Low/High Temperature)
Seal-- Duo- Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Seal-- Bushing O-Ring 2 2S-2182
Seal-- Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

361
 Low Sprocket Tractors
D6

D6 IDLERS
SMALL O.D., FORMER
8U1-10970, 9U1-29218

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Idler Assembly 2 1M-3121
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 5M-1913
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Bolt 12 0S-1587
Washer 12 3B-4508
Plug 1 2B-7408
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 2S-2182
Seal -- Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

362
 Low Sprocket Tractors
D6

D6 CARRIER ROLLERS
41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ,
8FJ, 10K, 1Y

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Group 4 -- 1 3T-3206
Components of Group
Roller Shell 1 -- 1 9S-8320
Shaft 1 1S-4467 3T-3207
Cup 2 1M-7911 9S-3581
Cone 2 1M-7912 9S-3582
Ring 1 5H-0034 1M-7914
Cover 1 5M-2043 5M-2043
Collar 1 1S-4468 9S-3567
Support 1 1M-7915 --
Plug 1 2P-0347 2P-0347
Bolt 3 0S-1594 0S-1594
Bolt 2 -- 5K-9107
Plate 1 -- 8P-6188
Nut 1 1M-7916 --
Ring 1 1M-7913 --
Seal -- Duo-Cone Group 1 9W-5224 6Y-0925
Toric Ring 2 2 1M-3097 8H-2262
Seal -- Cover 1 2H-6338 2H-6338
Seal -- Support 1 4H-9105 --
Seal -- Plug 1 1S-8947 1S-8947
Seal -- Shaft O-Ring 1 7F-8267 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 5K-6191 4S-8984
2
Toric Ring 2 2S-2181 9M-9730
1 Upgrade to 3T-3206 group.
2 Component of preceding group; quantity shown is the quantity per group.

363
 Low Sprocket Tractors
D6

D6 CARRIER ROLLERS
EARLY MODEL
37A, 44A, 8U, 9U

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 5A-8374
Components of Group
Roller Shell 1 5A-8375
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Bolt 2 5K-9107
Plate 1 8P-6188
Nut 1 1M-7916
Ring 1 1M-7913
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

364
 Low Sprocket Tractors
D6

D6 STANDARDIZED TRACK ROLLERS

CURRENT 3/4" MOUNTING HARDWARE
4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 288-0935
Single Flange (SF) 6 288-0934
1
Double Flange (DF) (Arctic) 6 288-0946
Single Flange (SF) (Arctic) 6 288-0945
1
Double Flange (DF) (High Heat) 6 288-0948
Single Flange (SF) (High Heat) 6 299-0947
2
Mounting Hardware
Cap 2 317-9079
Bolt (3/4") 4 1D-4610
Washer 4 5P-8248
1 8 required for LGP machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

D6 STANDARDIZED TRACK ROLLERS

FORMER 5/8" MOUNTING HARDWARE
4X1-4774, 41A, 71A, 73A, 74A, 76A, 82S, 83A, 23U, 90B, 46J, 47J, 55J, 69J, 99J, 10K, 17R, 24U, 49W, 5X1-779

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 288-0935
Single Flange (SF) 6 288-0934
Double Flange (DF) (Arctic) 61 288-0946
Single Flange (SF) (Arctic) 6 288-0945
1
Double Flange (DF) (High Heat) 6 288-0948
Single Flange (SF) (High Heat) 6 288-0947
2
Mounting Hardware
Cap 2 317-9078
Bolt (5/8") 4 1D-4585
Washer 4 2S-0736
1 8 required for LGP machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

365
 Low Sprocket Tractors
D6

D6 TRACK ROLLERS
3/4" MOUNTING HARDWARE
4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 118-1618 2
Single Flange (SF) 6 118-1617 3
Extended Wear Life (DF) 4 61 118-1635 2
4
Extended Wear Life (SF) 6 118-1634 3
Components of Group
Roller Shell (DF) 1 9G-8032 2
Roller Shell (SF) 1 9G-8027 3
Extended Wear Life Shell (DF) 4 1 9W-5411 2
4
Extended Wear Life Shell (SF) 1 9W-5408 3
Bushing Assembly 2 2P-8048
5
Bearing 1 8P-5197
Shaft 1 116-6702 6
End Collar 2 7G-0418 7
Ring 2 5M-4443
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 5 2 8H-2262
Seal -- Bushing O-Ring 2 2H-3928
Seal -- Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
8
Mounting Hardware
Bolt 4 1D-4608
Washer 4 5H-1504
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
5
Toric Ring 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 8S-5654
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4436
1 8 required on LGP machines.
2 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
3 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
4 For use with Extended Wear Life Track.
5 Component of preceding assembly or group; quantity shown is per assembly or group.
6 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group
(SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
7 If 7G-0419 shaft is used, use 1 - 7G-4018 and 1 - 7G-0417 end collar.
8 These components are not included in the roller group; quantities shown are required to mount each roller.

366
 Low Sprocket Tractors
D6

D6 TRACK ROLLERS
FORMER 5/8" MOUNTING HARDWARE
4X1-4774, 41A, 71A, 73A, 74A, 76A, 82S, 83A, 23U, 90B, 46J, 47J, 55J, 69J, 99J, 10K, 17R, 24U, 49W, 5X1-779

HEAVY DUTY
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Double Flange (DF) 61 118-1615 2 122-0217 2
Single Flange (SF) 6 118-1614 3 122-0216 3
Components of Group
Roller Shell (DF) 1 6Y-2904 2 9G-8032 4
Roller Shell (SF) 1 6Y-2902 3 9G-8027 5
6
Extended Wear Life Shell (DF) 1 -- 9W-5411 4
Extended Wear Life Shell (SF) 6 1 -- 9W-5408 5
Bushing Assembly 2 2P-8048 2P-8048
Bearing 7 1 8P-5197 8P-5197
8
Shaft 1 116-6702 116-6702 8
9
End Collar 2 5M-4436 5M-4436 9
Ring 2 5M-4443 5M-4443
Bolt 12 2P-3201 1A-2029
Washer 12 -- 5M-2894
Seal -- Duo-Cone Group 2 6Y-0925 1M-8747
7
Toric Ring 2 8H-2262 8H-2262
Seal -- Bushing O-Ring 2 2H-3928 2H-3928
Seal -- Shaft O-Ring 2 5F-8000 5F-8000
Stopper 1 7G-4332 7G-4332
Plug 1 6Y-0473 6Y-0473
10
Mounting Hardware
Bolt 4 1A-8537 1A-8537
Washer 4 2S-0736 2S-0736
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984
7
Toric Ring 2 9M-9730 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 8S-5654 8S-5654
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4436 8M-4436
1 8 required on LGP machines.
2 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
3 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
4 Increased bore hardness. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
5 Increased bore hardness. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
6 For use with Extended Wear Life Track.
7 Component of preceding assembly or group; quantity shown is per assembly or group.
8 Replaces former 5M-4448 shaft; requires 2 -- 5M-4436 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group
(SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
9 If 5M-4448 shaft is used, use 1 -- 5M-4436 and 1 -- 5M-4435 end collar.
10 These components are not included in the roller group; quantities shown are required to mount each roller.

367
 Low Sprocket Tractors
D6

D6 TRACK ROLLERS
EARLY MACHINE 5/8" MOUNTING HARDWARE
37A, 44A, 8U, 9U

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 8 118-1612
Single Flange (SF) 4 118-1611
Components of Group
Roller Shell (DF) 1 9S-9534
Roller Shell (SF) 1 9S-9535
Bushing Assembly 2 2P-8045
1
Bearing 1 8S-5796
Shaft 1 118-1613 2
End Collar 2 5M-0627 3
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
1
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
Bolt 4 8S-9092
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 2S-2182
Seal -- Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Replaces former 5M-1915 shaft; requires 2 -- 5M-0627 end collars.
3 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

368
 Low Sprocket Tractors
D6

D6 END GUIDING GUARDS

3X, 4X, 5X, 19X, 20X, 2MJ, 8FJ

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 7G-8517
Wear Strip 1 9S-8245
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Front (Outer RH, Inner LH)
Guard Assembly 1 7G-8513
Wear Strip 1 9S-8246
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Rear (Outer RH)
Guard Assembly 1 7G-8517
Wear Strip 1 9S-8245
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Rear (Outer LH)
Guard Assembly 1 7G-8513
Wear Strip 1 9S-8246
Bolt 4 7B-3235
Lock Washer 4 3B-4508

369
Low Sprocket Tractors
D6

D6 END GUIDING GUARDS

41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 10K, 1Y, 49W, 69U,
74W, 75W

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 9S-8258
Wear Strip 1 9S-8245
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Front (Outer RH, Inner LH)
Guard Assembly 1 9S-8257
Wear Strip 1 9S-8246
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Rear (Outer RH)
Guard Assembly 1 9S-8258
Wear Strip 1 9S-8245
Bolt 4 7B-3235
Lock Washer 4 3B-4508
Rear (Outer LH)
Guard Assembly 1 9S-8257
Wear Strip 1 9S-8246
Bolt 4 7B-3235
Lock Washer 4 3B-4508

D6 TRACK ROLLER GUARDS

FULL LENGTH
3X, 4X, 5X, 19X, 1Y

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7G-8524
Inner LH 1 7G-8549
Outer RH 1 7G-8534
Outer LH 1 7G-8534

370
 Low Sprocket Tractors
D6

D6 TRACK ROLLER GUARDS

FULL LENGTH
41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 19X, 20X, 1Y, 74W, 75W, 10K, 2MJ, 8FJ, 49W, 69U

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7M-2561
Inner LH 1 7M-2562
Outer RH 1 7M-2560
Outer LH 1 7M-2560

D6 TRACK ROLLER GUARDS

HEAVY DUTY FULL LENGTH
37A, 44A, 8U, 9U

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 5M-0633
Inner LH 1 5M-0634
Outer RH 1 5M-0635
Outer LH 1 5M-0636

D6 TRACK ROLLER GUARDS

FULL LENGTH
37A, 44A, 8U, 9U

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7B-7889
Inner LH 1 7B-7890
Outer RH 1 7B-7891
Outer LH 1 7B-7892

D6 TRACK ROLLER GUARDS

PARTIAL
3X, 4X, 5X, 19X, 20X

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7G-8539
Inner LH 1 7G-8536
Outer RH 1 7G-8535
Outer LH 1 7G-8535

371
Low Sprocket Tractors
D6

D6 TRACK ROLLER GUARDS

PARTIAL (CENTER)
6X

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7G-8527
Inner LH 1 7G-8532
Outer RH 1 7G-8533
Outer LH 1 7G-8528

D6 CENTER GUIDING GUARDS

3X, 4X, 5X, 6X, 2MJ, 8FJ

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 1 7G-8400
Wear Strip 1 3V-1133
Bolt 4 6H-1717
Lock Washer 4 3B-4508
Bolt 8 1D-4608
Washer 1 2S-0115
Spacer 1 3P-4133

D6 CENTER GUIDING GUARDS

41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 10K, 1Y, 49W, 69U,
74W, 75W

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 1 1P-0963
Wear Strip 1 3V-1133
Bolt 4 6H-1717
Lock Washer 4 3B-4508
Bolt 8 1D-4608
Washer 1 2S-0115
Spacer 1 3P-4133

372
 Low Sprocket Tractors
D6

D6 FINAL DRIVE GUARDS

41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 2MJ, 8FJ, 10K, 1Y,
49W, 69U, 74W, 75W

PART
(PER MACHINE) QUANTITY NUMBER
RH 1 9M-5045
LH 1 9M-5045
Bolts 8 0V-0375
Washer 8 0L-1714
Lock Washer 8 2M-0849

373
 Low Sprocket Tractors
D7, 571, 572

D7 SEALED AND LUBRICATED TRACK

HYBRID, SPLIT MASTER LINKS
47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W
8.50" (215.9 mm) PITCH -- 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

PART 38 41
NUMBER SECTION SECTION
Link Assembly -- (Quantity 2) 239-2230 1 239-6882 1
Components of Link Assembly
Track Links
RH Pin End Master 255-4791 1 1
LH Pin End Master 255-4792 1 1
RH Bushing End Master 255-4793 1 1
LH Bushing End Master 255-4794 1 1
RH Regular 233-0385 37 40
LH Regular 233-0386 37 40
Other Components
Pin 199-2794 38 41
Bushing 237-3790 38 41
Seal Assembly (Rigid) 251-1659 76 82
Thrust Ring 152-8073 76 82
Stopper 7G-4332 38 41
Plug 6Y-0473 38 41
Track Hardware 2
Bolt (3/4") 7H-3598 148 160
Nut 1S-1860 148 160
Master Bolt (7/8") 9W-9058 4 4
Special Sets/Groups
Bushing and Seal Group (40 Sections) 261-2353 1 1
Seal Set (86 Seal Assemblies) 251-1660 1 1
1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.
2 Not part of link assembly; required to assemble track group.

D7 MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 239-2230
Extreme Service -- 22.0" (560 mm) 2 239-6877

374
 Low Sprocket Tractors
D7, 571, 572

D7 SEALED AND LUBRICATED TRACK

47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W, 3GF, 3ZD, 7MB, C7G
8.50" (215.9 mm) PITCH -- 3/4" BOLT

PART 38 41
NUMBER SECTION SECTION
Link Assembly -- (Quantity 2) 117-1024 1 117-1027 2
Components of Link Assembly
Track Links
RH Pin End Master 2P-9653 1 1
LH Pin End Master 2P-9654 1 1
RH Bushing End Master 2P-9655 1 1
LH Bushing End Master 2P-9656 1 1
RH Regular 8S-2589 37 40
LH Regular 8S-2590 37 40
Other Components
Pin 3P-0622 38 41
Bushing 3P-0621 38 41
Seal Assembly (Rigid) 250-3998 76 82
Thrust Ring 3P-0623 76 82
Stopper 7G-4332 38 41
Plug 6Y-0473 38 41
3
Track Hardware
Bolt 7H-3598 148 160
Nut 1S-1860 148 160
Master Bolt 2P-9670 4 4
Special Sets/Groups
Bushing and Seal Group (38 Sections) 6I-8060 4 1 1
Seal Set (84 Seal Assemblies) 252-7858 1 1
1 Service replaced by (1) 239-2230 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for
master shoe rework.
2 Service replaced by (1) 239-6882 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for
master shoe rework.
3 Not part of link assembly; required to assemble track group.
4 Contains Extended Wear Life Bushings (8E-5258).

375
 Low Sprocket Tractors
D7, 571, 572

D7 SEALED TRACK
HYBRID, SPLIT MASTER LINKS
47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V
8.50" (215.9 mm) PITCH -- 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

PART
QUANTITY NUMBER
Link Assembly -- 38 Section 2 246-5808 1
Components of Link Assembly
Track Links
RH Pin End Master 1 255-4791
LH Pin End Master 1 255-4792
RH Bushing End Master 1 255-4793
LH Bushing End Master 1 255-4794
RH Regular 37 233-0385
LH Regular 37 233-0386
Other Components
Pin 38 8E-4272
Bushing 38 247-1475
Seal 152 8M-6239
Track Hardware 2
Bolt (3/4") 148 7H-3598
Nut 148 1S-1860
Master Bolt (7/8") 4 9W-9058
1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework. If 41 section link
assembly is required order 246-5808 and add 3 sections.
2 Not part of link assembly; required to assemble track group.

376
 Low Sprocket Tractors
D7, 571, 572

D7 SEALED TRACK
47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V
8.50" (215.9 mm) PITCH -- 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 38 Section 2 3P-0955 1
Components of Link Assembly
Track Links
RH Pin End Master 1 2P-9653
LH Pin End Master 1 2P-9654
RH Bushing End Master 1 2P-9655
LH Bushing End Master 1 2P-9656
RH Regular 37 8S-2589
LH Regular 37 8S-2590
Other Components
Pin 38 8E-4272
Bushing 38 1M-3669
Seal 152 8M-6239
Track Hardware 2
Bolt 148 7H-3598
Nut 148 1S-1860
Master Bolt 4 2P-9670
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4236
1 Service replaced by (1) 246-5808 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master
shoe rework. If 41 section link assembly is required order 246-5808 and add 3 sections.
2 Not part of link assembly; required to assemble track group.

377
 Low Sprocket Tractors
D7, 571, 572

D7 EXTENDED WEAR LIFE TRACK 1

CURRENT, LARGE O.D. BUSHING
8.50" (215.9 mm) PITCH -- 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 38 Section 2 -2
Components of Link Assembly
Track Links
RH Pin End Master 1 7T-4659
LH Pin End Master 1 7T-4660
RH Bushing End Master 1 7T-4661
LH Bushing End Master 1 7T-4662
RH Regular 37 7T-4657
LH Regular 37 7T-4658
Other Components
Pin 38 3P-0622
Bushing 38 8E-5258 3
Seal Assembly (Rigid) 76 250-3998
Thrust Ring 76 3P-0623
Stopper 38 7G-4332
Plug 38 6Y-0473
Track Hardware 4
Bolt 148 7H-3598
Nut 148 1S-1860
Master Bolt 4 2P-9670
Special Sets/Groups
Bushing and Seal Group (38 Sections) 1 6I-8060
Seal Set (84 Seal Assemblies) 1 252-7858
1 Note: Extended Wear Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections for details.
2 Canceled replaced by (1) 239-2230 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for
master shoe rework.
3 If small O.D. Bushing required use part no. 3P0621.
4 Not part of link assembly; required to assemble track group.

378
 Low Sprocket Tractors
D7, 571, 572

571,572 PIPELAYER TRACK

571: 16W
572: 40U, 65A
8.50" (215.9 mm) PITCH -- 3/4" BOLT

SEALED
PART 571 572
NUMBER 38 SECTION 39 SECTION
Link Assembly -- (Quantity 2) 3P-0955 1 -- 2
Components of Link Assembly
Track Links
RH Pin End Master 2P-9653 1 1
LH Pin End Master 2P-9654 1 1
RH Bushing End Master 2P-9655 1 1
LH Bushing End Master 2P-9656 1 1
RH Regular 8S-2589 37 38
LH Regular 8S-2590 37 38
Other Components
Pin 8E-4272 38 39
Bushing 1M-3669 38 39
Seal 8M-6239 152 156
Track Hardware 3
Bolt 7H-3598 148 152
Nut 1S-1860 148 152
Master Bolt 2P-9670 4 4
Special Sets/Groups
Pin and Bushing Group (38 Sections) 6P-4236 1 1
1 Service replaced by (1) 246-5808 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master
shoe rework.
2 Order 38 Section, 246-5808 Link Assembly and add 1 section.
3 Not part of link assembly; required to assemble track group.

379
 Low Sprocket Tractors
D7, 571, 572

D7, 572 SEALED TRACK

D7 (36, 37, 40 SECTION): 7M, 3T, 17A
D7, 572 (41 SECTION): 7M, 3T, 17A, 21A
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 41 Section 2 1S-6943 1
Components of Link Assembly
Track Links
RH Regular 41 1S-1863
LH Regular 41 1S-1864
Other Components
Pin 40 6B-5882
Master Pin 1 8M-7288
Bushing 40 8M-7289
Master Bushing 1 5M-2033
Seal (Spring Washer) 164 8M-7231
Spacer 2 8M-7290
Track Hardware 2
Bolt 164 1S-1859
Nut 164 1S-1860
Special Groups
Pin and Bushing Group (36 Sections) 1 8P-5689
1 If 36, 37, 40, section link assemblies are required order 1S-6943 and remove appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

D7, 571, 572 HYBRID TRACK SHOES

USE WITH TRACK LINKS 233-0385, 233-0386
8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 20.0" (510 mm) 5S-6909 1Q-4919
Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4689 1Q-4690
Extreme Service 22.0" (560 mm) 5S-6910 1Q-4956
Extreme Service 24.0" (610 mm) 5S-6911 243-5731
Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4965 1Q-4964
Moderate Service 22.0" (560 mm) 1P-9808 243-5729
Moderate Service 24.0" (610 mm) 1P-9809 263-9764
Moderate Service 26.0" (660 mm) 1P-9810 243-5733
Moderate Service 34.0" (865 mm) 8P-0430 263-9762
Double Grouser 18.0" (460 mm) 8E-4434 263-9760
Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761
Double Grouser (Trapezoidal Opening) 22.0" (560 mm) 8E-4432 263-9759
Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8325 8E-8324

380
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 TRACK SHOES

8.50" (215.9 mm) PITCH -- 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service 20.0" (510 mm) 5S-6909 3P-0619
Extreme Service 22.0" (560 mm) 5S-6910 2P-9669
Extreme Service 24.0" (610 mm) 5S-6911 3P-0620
Moderate Service 18.0" (460 mm) 6P-3068 6P-3069
Moderate Service 20.0" (510 mm) 1P-9807 3P-0615
Moderate Service 22.0" (560 mm) 1P-9808 3P-0616
Moderate Service 24.0" (610 mm) 1P-9809 3P-0617
Moderate Service 26.0" (660 mm) 1P-9810 3P-0618
Moderate Service 28.0" (710 mm) 2P-0854 6P-2786
Moderate Service 34.0" (865 mm) 8P-0430 8P-0429
Double Grouser 18.0" (460 mm) 8E-4434 8E-4435
Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 8E-4437
Double Grouser (Trapezoidal Opening) 22.0" (560 mm) 8E-4432 8E-4433
Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-4468 8E-4437 1
Steel Mill Flat 16.0" (405 mm) 7T-1312 7T-1313
Self Cleaning 34.0" (865 mm) 6P-2647 6P-2648
Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8325 8E-8326
1 Double Grouser

D7, 571, 572 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART
TYPE WIDTH NUMBER
Extreme Service 22.0" (560 mm) 6Y-6402
Double Grouser 18.0" (460 mm) 8E-4424
Triple Grouser ( Slots) 18.0" (460 mm) 8S-4468

D7, 571, 572 SPROCKETS

47A3396-UP, 35N, 93N, 94N, 95N, 96N, 48A6393-UP, 40U, 91V, 92V, 16W, 64A152-UP, 44W, 45W, 72W,
65A751-UP
8.50" (215.9 mm) PITCH -- 3/4" BOLT

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 9G-0007
Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9679
Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219
Bolt 20 282-3655
Nut 20 7H-3608

381
Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 SPROCKETS

47A1-3395, 48A1-6392, 64A1-151, 65A1-750
8.50" (215.9 mm) PITCH -- 3/4" BOLT

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 3S-9993
Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9679
Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219
Adapter Ring 1 3S-8252
Rim 1 5M-3022
Bolt 20 282-3655
Nut 20 7H-3608

D7, 572 SPROCKETS

7M, 3T, 17A, 21A
8.00" (203.2 mm) PITCH -- 3/4" BOLT

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 3S-9140
Sprocket Segment (5 Tooth) 2 3S-9138
Sprocket Segment (4 Tooth) 4 3S-9139
Adapter Ring 1 4S-9005
Rim 1 3S-7090
Bolt 26 282-3655
Nut 26 7H-3608

382
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 IDLERS

47A, 48A, 64A, 65A, 91E, 92E, 35N, 93N, 94N, 40U, 91V, 92V, 44W, 45W, 72W, 17A18761-UP

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Idler Assembly (Standard) 2 9H-8489 9H-8489
1
Idler Assembly (Optional) 2 1S-8186 1S-8186
2
Extended Wear Idler Assembly 2 7T-4509 7T-4509
Other Components
Bushing Assembly 2 3P-8432 3P-8432
Bearing 3 1 8P-6651 8P-6651
Shaft 1 8M-0343 9M-9758
Bearing Block 1 8M-0341 7G-1901
Bearing Block 1 8M-0342 7G-1902
Seal -- Duo-Cone Group 2 6Y-0925 6Y-0925
3
Toric Ring 2 8H-2262 8H-2262
Seal -- Bushing O-Ring 2 4H-9105 4H-9105
Seal -- Shaft O-Ring 2 8F-6711 8F-6711
Seal -- Plug 1 1S-8947 1S-8947
Bolt 12 3B-1915 3B-1915
Washer 12 3B-4506 3B-4506
Plug 1 2P-0347 2P-0347
Pin 2 8M-0344 5M-5000
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984
3
Toric Ring 2 9M-9730 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729 9M-9729
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390 8M-4390
1 Heavy Duty (Reinforcing plates for strength).
2 For use with Extended Wear Life Track.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

383
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 CARRIER ROLLERS

47A, 48A, 64A, 65A, 35N, 93N, 94N, 40U, 91V, 92V, 16W, 44W, 45W, 91E, 72W, 93E

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 1P-8717
Components of Group
Roller Shell 1 1P-8716
Shaft 1 1P-8715
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Roller Groups
Group (Steel Mill) 4 2P-3514
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
Group (Arctic) 4 255-8882
Seal -- Duo-Cone Group (Arctic) 2 171-5882
1
Toric Ring 2 162-2166
1 Component of preceding group; quantity shown is the quantity per group.

384
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 CARRIER ROLLERS

17A, 21A

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 -- 1
Components of Group
Roller Shell 1 9S-8321
Shaft 1 4S-9692
Cup 2 7H-4566
Cone 2 7H-4573
Ring 1 7H-4574
Cover 1 9M-0632
Collar Assembly 1 7H-4571
Support Assembly 1 9H-7687
Plug 1 2P-0347
Bolt 4 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Cover 1 2H-3934
Seal -- Support 1 5F-3144
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
2
Toric Ring 1 9M-9730
1 Upgrade to 1P-8717 group.
2 Component of preceding group; quantity shown is the quantity per group.

385
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 TRACK ROLLERS

7/8" MOUNTING HARDWARE
91E, 92E, 35N, 93N, 94N, 95N, 96N, 40U, 91V, 92V, 16W, 44W, 45W, 72W

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 118-1625
Single Flange (SF) 6 118-1623
2
Extended Wear Life (DF) 6 118-1637
Extended Wear Life (SF) 2 6 118-1636
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
2
Extended Wear Life (DF) 1 9W-8356
Extended Wear Life (SF) 2 1 9W-8359
Bushing Assembly 2 1P-8787
3
Bearing 1 8P-6651
Shaft 1 118-1628 4
End Collar 2 9S-0312 5
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 3 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
6
Mounting Hardware
Bolt 4 1D-4629
Washer 4 9H-1031
Special Application Roller Groups
Double Flange (DF) (Steel Mill) 6 118-1631
Single Flange (SF) (Steel Mill) 6 118-1630
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
3
Toric Ring 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390
1 8 rollers required for LGP machines.
2 For use with Extended Wear Life Track.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Replaces former 9S-0313 shaft.
5 If 9S-0313 shaft is used, use 9S-0312 (1) and 9S-0311 (1) end collar.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

386
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 TRACK ROLLERS

3/4" MOUNTING HARDWARE
47A, 48A, 64A, 65A, 79S, 95A

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 118-1620
Single Flange (SF) 6 118-1619
2
Extended Wear Life (DF) 6 --
Extended Wear Life (SF) 2 6 --
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
2
Extended Wear Life (DF) 1 9W-8356
Extended Wear Life (SF) 2 1 9W-8359
Bushing Assembly 2 1P-8787
3
Bearing 1 8P-6651
Shaft 1 118-1628 4
End Collar 2 7M-5112 5
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 3 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
6
Mounting Hardware
Bolt 4 1D-4609
Washer 4 5H-1504
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
3
Toric Ring 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390
1 8 rollers required for LGP machines.
2 For use with Extended Wear Life Track.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Replaces former 7M-5109 shaft.
5 If 7M-5109 is used, use 7M-5112 (1) and 7M-5111 (1) end collar.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

387
 Low Sprocket Tractors
D7, 571, 572

D7, 571, 572 TRACK ROLLERS

5/8" MOUNTING HARDWARE
17A, 21A

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 61 --
Single Flange (SF) 6 --
2
Extended Wear Life (DF) 6 --
Extended Wear Life (SF) 2 6 --
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
2
Extended Wear Life (DF) 1 9W-8356
Extended Wear Life (SF) 2 1 9W-8359
Bushing Assembly 2 1P-8787
3
Bearing 1 8P-6651
Shaft 1 5M-1712
End Collar 1 7M-3308
End Collar 1 7M-3309
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
3
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 4
Bolt 4 0S-2318
Washer 4 3B-4510
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 3 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390
1 8 rollers required for LGP machines.
2 For use with Extended Wear Life Track.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

388
 Low Sprocket Tractors
D7, 571, 572

D7 END GUIDING GUARDS

47A, 48A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 44W, 45W, 72W

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 9S-1044
Wear Strip 1 9S-1046
Bolt 4 0S-1592
Lock Washer 4 3B-4510
Front (Outer RH, Inner LH)
Guard Assembly 1 9S-1043
Wear Strip 1 9S-1045
Bolt 4 0S-1592
Lock Washer 4 3B-4510
Rear (Outer RH)
Guard Assembly 1 9S-1044
Wear Strip 1 9S-1046
Bolt 4 0S-1592
Lock Washer 4 3B-4510
Rear (Outer LH)
Guard Assembly 1 9S-1043
Wear Strip 1 9S-1045
Bolt 4 0S-1592
Lock Washer 4 3B-4510

D7 TRACK ROLLER GUARDS

PARTIAL
91V, 92V

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assemblies
Inner RH 1 6P-7625
Inner LH 1 6P-7626
Outer RH 1 6P-7627
Outer LH 1 6P-7627

389
Low Sprocket Tractors
D7, 571, 572

D7 TRACK ROLLER GUARDS

FULL
91V, 92V

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assemblies
Inner RH 1 6P-7622
Inner LH 1 6P-7623
Outer RH 1 6P-7614
Outer LH 1 6P-7614

D7 TRACK ROLLER GUARDS

FULL
93N, 94N

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assemblies
Inner RH 1 9S-1669
Inner LH 1 9S-1670
Outer RH 1 9S-1671
Outer LH 1 9S-1671

571, 572 TRACK ROLLER GUARDS

FULL
16W

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assemblies
Inner RH 1 6P-7622
Inner LH 1 6P-7623
Outer RH 1 6P-7614
Outer LH 1 6P-7614

571, 572 TRACK ROLLER GUARDS

FULL
40U

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assemblies
Inner RH 1 6P-8803
Inner LH 1 6P-8804
Outer RH 1 6P-8806
Outer LH 1 6P-8806

390
 Low Sprocket Tractors
D7, 571, 572

571, 572 TRACK ROLLER GUARDS

FULL
95N

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assemblies
Inner RH 1 9S-1669
Inner LH 1 9S-1670
Outer RH 1 9S-1671
Outer LH 1 9S-1671

D7 FINAL DRIVE GUARDS

47A, 48A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V

PART
(PER MACHINE) QUANTITY NUMBER
RH 1 7M-1890
LH 1 7M-1889
Bolts 8 1D-4586
Lock Washer 8 4D-3704

391
 Low Sprocket Tractors
D8, 583

D8, CLASSIC SEALED AND LUBRICATED TRACK

LONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)
22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V
9.00" (228.6 mm) PITCH -- 7/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 41 Section 2 188-5310 1
Components of Link Assembly
Track Links
RH Master Links (Split Master Complete) 1 188-5712
LH Master Links (Split Master Complete) 1 188-5711
RH Regular 40 188-5531
LH Regular 40 188-5532
Other Components
Pin 41 188-5710
Bushing 41 188-5658
Seal Assembly (Rigid) 82 259-7065
Thrust Ring 82 188-5689
Stopper 41 7G-4332
Plug 41 6Y-0473
Track Hardware
Bolt 2 160 188-5639
Nut 2 160 188-5857
Master Bolt (Included with link assembly) 4 188-5640
1 If 39 section link assembly is required, order 188-5310 and remove two sections.
2 Not part of link assembly; required to assemble track group.

392
 Low Sprocket Tractors
D8, 583

D8, 583 CLASSIC SEALED TRACK

LONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)
22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V, 38A, 61A, 79V
9.00" (228.6 mm) PITCH -- 7/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 41 Section 2 -- 1
Components of Link Assembly
Track Links
RH Master Links (Split Master Complete) 1 188-5712
LH Master Links (Split Master Complete) 1 188-5711
RH Regular 40 188-5531
LH Regular 40 188-5532
Other Components
Pin 41 1M-1455
Bushing 41 8M-2619
Seal 164 8M-2620
Track Hardware
Bolt 2 160 188-5639
Nut 2 160 188-5857
Master Bolt (Included with link assembly) 4 188-5640
1 Sealed link assembly is no longer offered. Sealed and Lubricated link assembly 41 sections 188-5310 is available. If 39 or 42 section link
assemblies are required, order 188-5310 and add or remove appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

393
 Low Sprocket Tractors
D8, 583

D8 SEALED & LUBRICATED TRACK

D8 (39 SECTION: 6 ROLLER); D8 (41 SECTION: 7 ROLLER)
22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V
9.00" (228.6 mm) PITCH -- 7/8" BOLT

39 41
PART NUMBER SECTION SECTION
Link Assembly -- (Quantity 2) 9W-8938 1 9W-8937 2
Components of Link Assembly
Track Links
RH Pin End Master 7S-9601 1 1
LH Pin End Master 7S-9602 1 1
RH Bushing End Master 7S-9603 1 1
LH Bushing End Master 7S-9604 1 1
RH Regular 7S-9181 38 40
LH Regular 7S-9182 38 40
Other Components
Pin 2P-9486 39 41
Bushing 2P-9484 39 41
Seal Assembly (Rigid) 248-1539 78 82
Thrust Ring 9W-3563 78 82
Stopper 7G-4332 39 41
Plug 6Y-0473 39 41
Track Hardware 3
Bolt 7H-3599 152 160
Nut 2S-2140 152 160
Master Bolt 8S-0395 4 4
Special Sets/Groups
Seal Set (82 Seal Assemblies) 250-2336 1 1
Bushing and Seal Group (41 Sections) 9W-8936 1 1
1 Serviced Replaced By Classic Sealed and Lubricated Link Assembly and remove 2 sections.
2 Serviced Rplaced By Classic Link Assembly 188-5310.
3 Not part of link assembly; required to assemble track group.

394
 Low Sprocket Tractors
D8, 583

D8, 583 PIPELAYER SEALED TRACK

D8 (39, 41 SECTIONS) 22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V
583 (42 SECTION) 38A, 61A, 79V
9.00" (228.6 mm) PITCH -- 7/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 41 Section 2 8S-0396 1
Components of Link Assembly
Track Links
RH Pin End Master 1 7S-9601
LH Pin End Master 1 7S-9602
RH Bushing End Master 1 7S-9603
LH Bushing End Master 1 7S-9604
RH Regular 40 7S-9181
LH Regular 40 7S-9182
Other Components
Pin 41 1M-1455
Bushing 41 8M-2619
Seal 164 8M-2620
2
Track Hardware
Bolt 160 7H-3599
Nut 160 2S-2140
Master Bolt 4 8S-0395
Special Sets/Groups
Pin and Bushing Group (41 Sections) 1 2P-6026
1 Service Replaced By 188-5310 Classic Sealed and Lubricated Link Assembly. If 39, 42 section link assemblies are required order 188-5310 and
add or remove appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

395
 Low Sprocket Tractors
D8, 583

D8, 583 SEALED TRACK

D8: 13A, 14A, 15A; 583: 16A
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 42 Section 2 -
Components of Link Assembly
Track Links
RH Regular 42 1S-8839
LH Regular 42 1S-8840
Other Components
Pin 41 4B-6620
Master Pin 1 8M-7229
Bushing 41 8M-7230
Master Bushing 1 5M-2035
Seal (Spring Washer) 168 8M-7231
Spacer 2 8M-7232
1
Track Hardware
Bolt 168 7H-3598
Nut 168 1S-1860
1 Not Part of Link Assembly; required to assemble track group.

D8, 583 CLASSIC TRACK SHOES 1

9.00" (228.6 mm) PITCH -- 7/8" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Super Extreme Service 2 22.0" (560 mm) 188-5617 188-5618
2
Super Extreme Service 24.0" (610 mm) 188-5313 188-5314
Extreme Service 20.0" (510 mm) 281-6370 281-6371
Extreme Service 22.0" (560 mm) 188-5617 188-5618
Extreme Service 24.0" (610 mm) 188-5313 188-5314
3
Extreme Service 26.0" (660 mm) 188-5613 188-5614
Extreme Service 3 28.0" (710 mm) 188-5615 188-5616
Extreme Service 30.0" (760 mm) 281-6372 315-6693
Moderate Service 2 22.0" (560 mm) 188-5617 188-5618
Moderate Service 24.0" (610 mm) 188-5311 188-5312
Moderate Service 26.0" (660 mm) 188-5613 188-5614
Moderate Service 28.0" (710 mm) 188-5615 188-5616
Moderate Service 30.0" (760 mm) 281-6373 281-6374
1 When replacing a Genuine ES shoe with Classic ES shoe, or a Genuine MS shoe with a Classic MS shoe, or a Genuine ES shoe with a Classic
MS shoe, or a Genuine MS shoe with a Classic ES shoe a PONTENTIAL INTERFERENCE MAY OCCUR. When replacing a Genuine SES shoe
with a Classic ES shoe INTERFERENCE WILL OCCUR. Grinding/machine of the leading or trialing edge might/will be required in order to provide
clearance between the adjacent shoes. If more than one genuine shoe must be replaced, position the shoes on the chain together. This will
provide that any required grinding/machining will only be required at one location. Refer to Service Magazine titled "Genuine Track Shoes are
being replace with Classic Track Shoes" Media No. SEPD0872-00 dated January 22, 2007.
2 Serviced Replaced by Classic Extreme Service Shoe.
3 Serviced Replaced by Classic Moderate Service Shoe.

396
 Low Sprocket Tractors
D8, 583

D8 SPROCKETS
77V3958 - UP
9.00" (228.6 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 6P-3596
Sprocket Group (Contains 9 segments, no hardware) (3 Tooth) (Classic) 1 188-5641
Bolt 27 9S-2727
Nut 27 7H-3609

D8 SPROCKETS
76V, 77V1-3957
9.00" (228.6 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 6P-9107
Sprocket Group (Contains 9 segments, no hardware) (3 Tooth) (Classic) 1 188-5641
Bolt 27 9S-2727
Nut 27 7H-3609

D8 SPROCKETS
35A, 36A, 46A
9.00" (228.6 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 6P-9107
Sprocket Group (Contains 9 segments, no hardware) (3 Tooth) (Classic) 1 188-5641
Adapter Ring 1 9S-6678
Rim 1 1S-8725
Bolt 27 9S-2727 1
Nut 27 7H-3609
1 For machines with serial numbers 36A4649-5022, 46A2234-2787, 46A12585-17168, use 3S-7837 bolt.

D8 SPROCKETS
OPTIONAL
13A, 14A, 15A, 1H, 8R, 2U
9.00" (228.6 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Sprocket Segment (5 Tooth) 5 5S-0122
Rim 1 2M-8810
Bolt 20 3S-7837
Nut 20 7H-3609

397
 Low Sprocket Tractors
D8, 583

D8 SPROCKETS
13A, 14A, 15A, 1H, 8R, 2U
8.00" (203.2 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Sprocket Segment (2 Tooth) 7 4S-9112
Bolt 21 3S-7837
Nut 21 7H-3609

583 SPROCKETS
78V
9.00" (228.6 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 6P-9107
Sprocket Group (Contains 9 segments, no hardware) (3 Tooth) (Classic) 1 188-5641
Bolt 27 9S-2727
Nut 27 7H-3609

583 SPROCKETS
38A, 61A1-UP
9.00" (228.6 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 6P-9107
Sprocket Group (Contains 9 segments, no hardware) (3 Tooth) (Classic) 1 188-5641
Rim 1 1S-8725
Bolt 27 9S-2727 1
Nut 27 7H-3609
1 For machines with serial number 61A199-400, use 3S-7837 bolt.

D8, 583 CLASSIC IDLERS

76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78V
Fits low position idlers with reference bearing blocks 9S-4425/26.

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group (Complete) 2 200-9238 1
Idler Assembly 2 188-5610
1 Fits low position idlers with reference bearing blocks 9S-4425/26.

398
 Low Sprocket Tractors
D8, 583

D8, 583 IDLERS

76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78V

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 9S-7221 1
Other Components
Bushing Assembly 2 6P-2083
2
Bearing 2 8P-6650
Shaft 1 9S-4324 3
Bearing Block 1 9S-4325 3
Bearing Block 1 9S-4326 3
Seal -- Duo-Cone Group 2 9W-2142
2
Toric Ring 2 8H-2265
Seal -- Bushing O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 1H-5728
Seal -- Plug 1 1S-8947
Bolt 12 0S-1585
Washer 12 3B-4508
Plug 1 2P-0347
Spacer 4 7M-8056
Lock 2 1S-3513
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
2
Toric Ring 2 8S-5653
1 Service Replaced by Classic part number 188-5610.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 For low position idlers only.

399
 Low Sprocket Tractors
D8, 583

D8, 583 IDLERS

35A, 38A, 36A1-5156, 46A1-20427, 61A1-626, 77V1-5006

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 9S-7221 1
Other Components
Bushing Assembly 2 6P-2083
2
Bearing 2 8P-6650
Shaft 1 5M-1245
Bearing Block 1 2M-7099
Bearing Block 1 2M-7100
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 2 2 8H-2265
Seal -- Bushing O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 1H-5728
Seal -- Plug 1 1S-8947
Bolt 12 0S-1585
Washer 12 3B-4508
Plug 1 2P-0347
Spacer 4 7M-8056
Lock 2 1S-3513
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
2
Toric Ring 2 8S-5653
1 Service Replaced by Classic part number 188-5610.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D8, 583 CLASSIC CARRIER ROLLERS

14A, 15A, 16A, 35A, 38A, 61A, 36A, 46A1, 76V, 77V, 78V
INSIDE MOUNT/OUTSIDE MOUNT

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 2 188-5612

400
 Low Sprocket Tractors
D8, 583

D8, 583 CARRIER ROLLERS

OUTSIDE MOUNT
36A3500-UP, 46A3889-UP, 76V, 77V, 78V

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 8P-6256 1
Components of Group
Roller Shell 1 8P-6245 1
Shaft 1 8P-6255
Cup 2 7K-5448
Cone 2 7K-5449
Ring 1 9H-7759
Cover 1 5M-2043
Collar Assembly 1 9H-9414
Plug 1 2P-0347
Bolt 4 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
2
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-5728
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
Toric Ring 2 2 9M-9730
1 Service Replaced by Classic Carrier Roller Group part number 188-5612.
2 Component of preceding group; quantity shown is the quantity per group.

401
 Low Sprocket Tractors
D8, 583

D8, 583 CARRIER ROLLERS

INSIDE MOUNT
14A, 15A, 16A, 35A, 38A, 61A, 36A1-3449, 46A1-3888

PART
(PER MACHINE) QUANTITY NUMBER
Group 4 -- 1
Components of Group
Roller Shell 1 9S-8304 1
Shaft 1 5M-1246 1
Cup 2 6Y-7652
Cone 2 4B-7255
Ring 1 9H-7759
Cover 1 5M-1669
Collar Assembly 1 9H-9414
Support Assembly 1 9H-7687 1
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Cover 1 2H-3928
Seal -- Support 1 5F-3144
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-5728
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
2
Toric Ring 2 9M-9730
1 Service Replaced by Classic Carrier Roller Group part number 188-5612.
2 Component of preceding group; quantity shown is the quantity per group.

D8, 583 CLASSIC TRACK ROLLERS

35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) (1" Mounting Hardware) 81 188-5608
Single Flange (SF) (1" Mounting Hardware) 6 188-5607
1
Double Flange (DF) (7/8" Mounting Hardware) 8 281-6386
Single Flange (SF) (7/8" Mounting Hardware) 6 281-6380
2
Mounting Hardware
Bolt (1") 4 1D-4640
Washer (1") 4 3K-5235
Bolt (7/8") 4 1D-4630
Washer (7/8") 4 3B-4514
1 6 Double Flange roller required for 6 roller frame machines.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

402
 Low Sprocket Tractors
D8, 583

D8, 583 TRACK ROLLERS

35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) (7/8" Mounting Hardware) 81 9P-3309 2
Double Flange (DF) (1" Mounting Hardware) 81 6P-4898 3
Single Flange (SF) (7/8" Mounting Hardware) 6 9P-3308 4
Single Flange (SF) (1" Mounting Hardware) 6 6P-4897 5
Components of Group
Roller Shell (DF) 1 6P-3307 6
Roller Shell (SF) 1 6P-3303 7
Bushing Assembly 2 2P-8052 8
9
Bearing 1 8P-6650
Shaft 1 5M-1247 8
End Collar (7/8" Mounting Hardware) 2 4S-8099 10
End Collar (1" Mounting Hardware) 2 7S-7936 11
Bolt 12 0S-1585
Bolt 12 3B-4508
Pin 2 1T-0068
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 9 2 8H-2265
Seal -- Bushing O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 1H-7339
Seal -- Plug O-Ring 1 1S-8947
Plug 1 2P-0347
12
Mounting Hardware
Bolt (7/8") 4 1D-4630
Bolt (1") 4 1D-4640
Washer (7/8") 4 3B-4514
Washer (1") 4 3K-5234
Special Application Roller Groups
Double Flange (DF) (Arctic) (1" Mounting Hardware) 81 7G-8809 13
Single Flange (SF) (Arctic) (1" Mounting Hardware) 6 7G-8810 14
Seal -- Duo-Cone Group 2 8S-5656
Toric Ring 9 2 8S-5653
Seal -- Bushing O-Ring 2 4S-5898
Seal -- Shaft O-Ring 2 5M-3038
1 6 Double Flange rollers required for 6 roller frame machines.
2 Serviced Replaced By Classic Roller Group part number 281-6386.
3 Serviced Replaced By Classic Roller Group part number 188-5608.
4 Serviced Replaced By Classic Roller Group part number 281-6380.
5 Serviced Replaced By Classic Roller Group part number 188-5607.
6 Serviced Replaced By Classic Roller Groups part number (188-5608 with 1" mounting bolts) or (281-6386 with 7/8" mounting bolts).
7 Serviced Replaced By Classic Roller Groups part number (188-5607 with 1" mounting bolts) or (281-6380 with 7/8" mounting bolts).
8 Serviced Replaced By one of the following Classic Roller Group part numbers: (188-5608 DF with 1" mounting bolts); (188-5607 SF with 1"
mounting bolts); (281-6386 DF with 7/8" mounting bolts); (281-6380 SF with 7/8" mounting bolts).
9 Component of preceding assembly or group; quantity shown is per assembly or group.
10 Serviced Replaced By Classic Roller Group part number (281-6386 Double Flange) or (281-6380 Single Flange).
11 Serviced Replaced By Classic Roller Group part number (188-5608 Double Flange) or (188-5607 Single Flange).
12 These components are not included in the roller group; quantities shown are required to mount each roller.
13 Serviced Replaced By the following Roller Group and Seals: 1 - Classic Roller Group (DF) 188-5608; 4 - Toric Ring 8S-5653; 2 - Bushing
O-Ring Seal 4S-5898; 2 - Shaft O-Ring Seal 5M-3038; 1 - Plug O-Ring Seal 2P-2975.
14 Serviced Replaced By the following Roller Group and Seals: 1 - Classic Roller Group (DF) 188-5607; 4 - Toric Ring 8S-5653; 2 - Bushing
O-Ring Seal 4S-5898; 2 - Shaft O-Ring Seal 5M-3038; 1 - Plug O-Ring Seal 2P-2975.
403
 Low Sprocket Tractors
D8, 583

D8, 583 TRACK ROLLERS

14A, 15A, 16A
8.00" PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 81 --
Single Flange (SF) 6 --
Components of Group
Roller Shell (DF) 1 8H-5375
Roller Shell (SF) 1 8H-5376
Bushing Assembly 2 8H-5377
2
Bearing 1 1M-4021
Shaft 1 5M-1712
End Collar (Inner) 1 8H-5381
End Collar (Outer) 1 8H-5380
Bolt 12 0S-1585
Washer 12 3B-4508
Ring 2 6H-6237
Seal -- Duo-Cone Group 1 6Y-0925
2
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 5H-6734
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 2P-0347
3
Mounting Hardware
Bolt 4 1D-4630
Washer 4 3B-4514
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 3P-1848
2
Toric Ring 2 3P-1847
Seal -- Bushing O-Ring 2 4S-5898
Seal -- Shaft O-Ring 2 5M-3038
1 6 Double Flange rollers required for 6 roller frame machines.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

404
 Low Sprocket Tractors
D8, 583

D8 END GUIDING GUARDS

38A3864-UP, 46A6151-UP, 76V, 77V

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 5S-0163
Wear Strip 1 5S-0161
Bolt 4 0S-1973
Lock Washer 4 3B-4514
Front (Outer RH, Inner LH)
Guard Assembly 1 5S-0162
Wear Strip 1 5S-0160
Bolt 4 0S-1973
Lock Washer 4 3B-4514
Rear (Outer RH)
Guard Assembly 1 5S-0163
Wear Strip 1 5S-0161
Bolt 4 0S-1973
Lock Washer 4 3B-4514
Rear (Outer LH)
Guard Assembly 1 5S-0162
Wear Strip 1 5S-0160
Bolt 4 0S-1973
Lock Washer 4 3B-4514

405
Low Sprocket Tractors
D8, 583

D8 END GUIDING GUARDS

36A3500-3863, 46A3889-6150

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 5S-9876
Wear Strip 1 5S-0161
Bolt 4 0S-1973
Lock Washer 4 3B-4514
Front (Outer RH, Inner LH)
Guard Assembly 1 5S-9877
Wear Strip 1 5S-0161
Bolt 4 0S-1973
Lock Washer 4 3B-4514
Rear (Outer RH)
Guard Assembly 1 5S-9876
Wear Strip 1 5S-0161
Bolt 4 0S-1973
Lock Washer 4 3B-4514
Rear (Outer LH)
Guard Assembly 1 5S-9877
Wear Strip 1 5S-0160
Bolt 4 0S-1973
Lock Washer 4 3B-4514

D8 TRACK ROLLER GUARDS

76V, 77V

PART
(PER MACHINE) QUANTITY NUMBER
Front (Guard Assemblies)
Inner RH 1 6P-7693
Inner LH 1 6P-7692
Outer RH 1 6P-7692
Outer LH 1 6P-7693
Rear (Guard Assemblies)
Inner RH 1 6P-7691
Inner LH 1 6P-7694
Outer RH 1 6P-7693
Outer LH 1 6P-7692

406
 Low Sprocket Tractors
D8, 583

D8, 583 FINAL DRIVE GUARDS

36A3916-UP, 46A6659-UP, 61A, 76V, 77V, 78V

PART
(PER MACHINE) QUANTITY NUMBER
RH 1 6P-0549
LH 1 6P-0549
Bolts 12 1S-0454
Lock Washer 12 3B-4514

407
 Low Sprocket Tractors
D9, 594

D9 SEALED AND LUBRICATED TRACK 1

38 SECTION: 18A2451-UP, 19A1808-UP, 34A, 49A, 50A
39 SECTION: 66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U
10.25" (260.4 mm) PITCH -- 1" BOLT

PART 38 39
NUMBER SECTION SECTION
Link Assembly -- 39 Section -- 2 9W-8320
Components of Link Assembly
Track Links
RH Pin End Master 8S-0943 1 1
LH Pin End Master 8S-0944 1 1
RH Bushing End Master 8E-4057 1 1
LH Bushing End Master 8E-4058 1 1
RH Regular 8E-4055 37 38
LH Regular 8E-4056 37 38
Other Components
Pin 2P-9423 38 39
Bushing 2P-9424 38 39
Seal Assembly (Rigid) 248-1537 76 78
Thrust Ring 2P-9419 76 78
Stopper 7G-4332 38 39
Plug 6Y-0473 38 39
3
Track Hardware
Bolt 2M-5657 148 152
Nut 1S-6421 148 152
Master Bolt 8S-1723 4 4
Special Sets/Groups
Seal Set (78 Seal Assemblies) 250-2337 1 1
Bushing and Seal Group (39 Sections) 9W-8381 1 1
1 Order these parts for D9D's converted to 10.25" pitch track.
2 Order 39 Section -- 9W-8320 Link Assembly and remove 1-section.
3 Not part of link assembly; required to assemble track group

D9 MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PART
QUANTITY NUMBER
Link Assembly Used 9W-8320
Extreme Service Shoe -- 24" (610 mm) 2 6Y-2327
Extreme Service Shoe -- 27" (685 mm) 2 6Y-2328

408
 Low Sprocket Tractors
D9, 594

D9, 594 PIPELAYER SEALED TRACK 1

D9 (38 SECTION): 18A2451-UP, 19A1808-UP, 34A, 49A, 50A
D9 (39 SECTION): 66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U
594 (42 SECTION): 62H
10.25" (260.4 mm) PITCH -- 1" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 39 Section 2 8S-1731 2
Components of Link Assembly
Track Links
RH Pin End Master 1 8S-0943
LH Pin End Master 1 8S-0944
RH Bushing End Master 1 8E-4057
LH Bushing End Master 1 8E-4058
RH Regular 38 8E-4055
LH Regular 38 8E-4056
Other Components
Pin 39 2M-5652
Bushing 39 2S-0253
Seal 156 1S-4446
Track Hardware 3
Bolt 152 2M-5657
Nut 152 1S-6421
Master Bolt 4 8S-1723
1 Order these parts for D9Ds converted to 10.25" pitch.
2 If 38, 42 section link assemblies are required, order 8S-1731 and add or remove appropriate number of sections.
3 Not part of link assembly; required to assemble track group

D9, 594 TRACK SHOES

10.25" (260.4 mm) PITCH - 1" BOLT

REGULAR
SHOE PART MASTER SHOE PART
TYPE WIDTH NUMBER NUMBER
Super Extreme Service 1 24.0" (610 mm) 3T-5971 3T-5970
Super Extreme Service 1 27.0" (685 mm) 6T-5857 6T-5858
Extreme Service 20.0" (510 mm) 3T-8557 3T-8556
Extreme Service 24.0" (610 mm) 3T-8559 3T-8558
Extreme Service 27.0" (685 mm) 3T-8561 3T-8560
Extreme Service 30.0" (760 mm) 3T-8563 3T-8562
Extreme Service 2 34.0" (865 mm) 3T-8565 3T-8564
2
Extreme Service (Clipped) 40.0" (1015 mm) 3T-8497 3T-8494
Moderate Service 24.0" (610 mm) 7S-9294 8S-1724
Moderate Service 27.0" (685 mm) 8S-4458 8S-1725
Moderate Service 30.0" (760 mm) 8S-4462 8S-1726
2
Moderate Service 34.0" (865 mm) 9S-0542 8S-7027
1 Use 3T-6308 bolts with Super Extreme Service Shoes
2 For use on 594 pipelayers only.

409
 Low Sprocket Tractors
D9, 594

D9 SPROCKETS
90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U
10.25" (260.4 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 3P-4866
Sprocket Hub (Riveted Mud Guard) 1 3P-3327
Sprocket Segment (3 Tooth) 9 6T-6781
Bolt 27 5P-0233 1
Nut 27 2M-5656
1 Use 9S-2728 bolts for machine serial numbers 90J1-109 and 91J1-109.

D9 SPROCKETS
66A12746-UP
10.25" (260.4 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 3P-4866
Sprocket Segment (3 Tooth) 9 6T-6781
Bolt 27 5P-0233
Nut 27 2M-5656

D9 SPROCKETS
66A6155-12745
10.25" (260.4 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub (Riveted Mud Guard) 1 3P-3327
Sprocket Segment (3 Tooth) 9 6T-6781
Bolt 27 5P-0233 1
Nut 27 2M-5656
1 Use 9S-2728 bolts for machine serial numbers 66A6155-12655.

D9 SPROCKETS
66A4606-6154
10.25" (260.4 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub (Riveted Mud Guard) 1 3P-3327
Sprocket Segment (3 Tooth) 9 6T-6781
Bolt 27 3S-7461
Nut 27 2M-5656

410
 Low Sprocket Tractors
D9, 594

594 SPROCKETS
96V, 62H51-UP
10.25" (260.4 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 3P-6123
Sprocket Segment (3 Tooth) 9 6T-6781
Bolt 27 9S-2728
Nut 27 2M-5656

594 SPROCKETS
62H1-50
10.25" (260.4 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Hub 1 3P-6123
Sprocket Segment (3 Tooth) 9 6T-6781
Bolt 27 3S-7461
Nut 27 2M-5656

D9, 594 IDLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Idler Assembly 2 5S-1532 5S-1532
Other Components
Bushing Assembly 1 8P-5434 8P-5434
1
Bearing 2 8P-5430 8P-5430
Shaft 1 5M-1667 1S-3514
Bearing Block 1 9H-6981 1S-3512
Bearing Block 1 9H-6982 1S-3511
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
Toric Ring 1 2 6H-1309 6H-1309
Seal -- Bushing O-Ring 2 2H-3935 2H-3935
Seal -- Shaft O-Ring 2 2H-3931 2H-3931
Seal -- Plug 1 1S-8947 1S-8947
Plug 1 2P-0347 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 3P-1848 3P-1848
Toric Ring 1 2 3P-1847 3P-1847
Seal -- Bushing O-Ring 2 9N-2693 9N-2693
Seal -- Shaft O-Ring 2 6L-9965 6L-9965
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

411
 Low Sprocket Tractors
D9, 594

D9, 594 CARRIER ROLLERS

66A, 90J, 91J, 62H, 29N, 30N, 90V, 96V, 97V, 98V, 99V, 12U

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Group 4 -- 1 3P-3403
Components of Group
Roller Shell 1 9S-8322 3P-3399
Shaft 1 - 3P-3402
Cup 2 5P-9532 1P-2636
Cone 1 7H-2621 1P-2662
Ring 1 8F-0737 8F-0737
Support 1 7H-2623 7H-2623
Cover 1 5M-1669 5M-1669
Dowel 4 9H-7078 9H-7078
Seal -- Duo-Cone Group 1 9W-2142 9W-2142
Toric Ring 2 2 8H-2265 8H-2265
Seal -- Cover 1 2H-3928 2H-3928
Seal -- Inner Support 1 2H-3935 2H-3935
Seal -- Shaft O-Ring 1 6H-3977 6H-3977
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656 8S-5656
2
Toric Ring 2 8S-5653 8S-5653
1 Upgrade to 3P-3403 Group.
2 Component of preceding group; quantity shown is the quantity per group.

412
 Low Sprocket Tractors
D9, 594

D9, 594 TRACK ROLLERS

1" MOUNTING HARDWARE
12U, 29N, 30N, 62H49-UP, 66A5855-UP, 90J, 90V, 91J, 96V, 97V, 99V

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 81 8P-5604
1
Single Flange (SF) 6 8P-5605
Components of Group
Roller Shell (DF) 1 8P-5485
Roller Shell (SF) 1 8P-5486
Bushing Assembly 2 8P-5434
2
Bearing 1 8P-5430
Bushing Assembly (.040" Oversize) 2 8P-5429
Shaft 1 4M-0578
End Collar 2 8S-0009
Bolt 12 0S-1587
Washer 12 3H-7654
Ring 2 4S-8072
Pin 1 1T-0068
Seal -- Duo-Cone Group 2 9W-2201
2
Toric Ring 2 6H-1309
Seal -- Bushing O-Ring 2 2H-3935
Seal -- Shaft O-Ring 2 2H-3931
Seal -- Plug O-Ring 1 1S-8947
Plug 1 2P-0347
3
Mounting Hardware
Bolt 4 1D-4640
Washer 4 3K-5234
Special Application Groups/Seals (Low/High Temperature)
Double Flange (DF) 81 7G-8807
1
Single Flange (SF) 6 7G-8808
Seal -- Duo-Cone Group 2 3P-1848
2
Toric Ring 2 3P-1847
Seal -- Bushing O-Ring 2 9N-2693
Seal -- Shaft O-Ring 2 6L-9965
1 594 Pipelayers require 10 double flange rollers and 6 single flange rollers.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

413
 Low Sprocket Tractors
D9, 594

D9, 594 TRACK ROLLERS

7/8" MOUNTING HARDWARE
62H1-48, 66A1-66A5854

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 81 7G-2763
1
Single Flange (SF) 8 7G-2762
Components of Group
Roller Shell (DF) 1 8P-5485
Roller Shell (SF) 1 8P-5486
Bushing Assembly 2 8P-5434
2
Bearing 1 8P-5430
Bushing Assembly (.040" Oversize) 2 8P-5429
Shaft 1 4M-0578
End Collar 2 4S-8101
Bolt 12 0S-1587
Washer 12 3H-7654
Ring 2 4S-8072
Pin 1 1T-0068
Seal -- Duo-Cone Group 2 9W-2201
2
Toric Ring 2 6H-1309
Seal -- Bushing O-Ring 2 2H-3935
Seal -- Shaft O-Ring 2 2H-3931
Seal -- Plug O-Ring 1 1S-8947
Plug 1 2P-0347
3
Mounting Hardware
Bolt 4 1D-4630
Washer 4 9H-1031
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 3P-1848
2
Toric Ring 2 3P-1847
Seal -- Bushing O-Ring 2 9N-2693
Seal -- Shaft O-Ring 2 6L-9965
1 594 Pipelayers require 10 double flange rollers and 6 single flange rollers.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

414
 Low Sprocket Tractors
D9, 594

D9, 594 END GUIDING GUARDS

12U, 29N, 30N, 62H, 66A, 90J, 90V, 91J, 96V, 97V, 98V, 99V

PART
(PER MACHINE) QUANTITY NUMBER
Front (Outer LH, Inner RH)
Guard Assembly 1 3P-6955
Wear Strip 1 9M-6744
Bolt 4 1D-4625 1
Lock Washer 4 3B-4514
Front (Outer RH, Inner LH)
Guard Assembly 1 3P-6954
Wear Strip 1 9M-6743
Bolt 4 1D-4625 1
Lock Washer 4 3B-4514
Rear (Outer RH)
Guard Assembly 1 3P-6955
Wear Strip 1 9M-6744
Bolt 4 1D-4625 1
Lock Washer 4 3B-4514
Rear (Outer LH)
Guard Assembly 1 3P-6954
Wear Strip 1 9M-6743
Bolt 4 1D-4625 1
Lock Washer 4 3B-4514
1 1D4626 bolt required with 594 Pipelayer.

D9 TRACK ROLLER GUARDS

FULL LENGTH
66A5853-UP, 90J, 91J

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly
Inner RH 1 7S-8011
Inner LH 1 7S-8012
Outer RH 1 7S-8013
Outer LH 1 7S-8013

D9 FINAL DRIVE GUARDS

66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U

PART
(PER MACHINE) QUANTITY NUMBER
Guard 2 7S-7975
Bolt 12 1S-0454
Lock Washer 12 3B-4514

415
416
 Track-Type Loaders
INDEX

Track-Type Loaders
MODELS PAGE NO.

935C, 935B, 933C, 933, 931C, 931B, 931.............................................................. 418

939C, 939................................................................................................................ 432
941.......................................................................................................................... 442
943.......................................................................................................................... 452
951.......................................................................................................................... 460
953D, 953C, 953B, 953........................................................................................... 467
955.......................................................................................................................... 488
963D, 963C, 963B, 963........................................................................................... 507
973C, 973................................................................................................................ 529
977.......................................................................................................................... 548
983.......................................................................................................................... 567

417
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C/B, 931C/B, 931, 933C, 931 SEALED AND LUBRICATED TRACK

LARGE STEPPED BUSHING
36 & 37 SECTIONS 935C/B, 931B/C, 931
39 SECTION 933C, 933
6.125" (155.6 mm) PITCH - 9/16" BOLT

PART NUMBER 36 Section 37 Section 39 Section

Link Assembly (Quantity 2) 206-3130 205-8267 188-8764
Track Links
RH Pin End Master 6Y-0937 1 1 1
LH Pin End Master 6Y-0938 1 1 1
RH Bushing End Master 6Y-0939 1 1 1
LH Bushing End Master 6Y-0940 1 1 1
RH Regular 6Y-0935 35 36 38
LH Regular 6Y-0936 35 36 38
Other Components
Pin 154-3660 36 37 39
Bushing 188-6246 36 37 39
Seal Assembly (Rigid) 250-4002 72 74 78
Thrust Ring 6S-9049 72 74 78
Stopper 5G-2247 36 37 39
Plug 6Y-0473 36 37 39
1
Track Hardware
Bolt (Grouser Shoe) 4K-7038 140 144 152
Bolt (Self-Cleaning Shoe) 4K-7038 70 72 76
Bolt (Self-Cleaning Shoe) 5A-3187 70 72 76
Nut 7K-2017 140 144 152
Master Bolt (Grouser Shoe) 5A-3187 4 4 4
Master Bolt (Self-Cleaning Shoe) 5A-3187 2 2 2
Master Bolt (Self-Cleaning Shoe) 5P-4683 2 2 2
Special Sets/Groups
Bushing & Seal Group (39 Sections) 206-3128 1 1 1
Seal Set (78 Seal Assemblies) 252-7861 1 1 1
1 Not part of link assembly, required to assemble track group.

418
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C/B, 933C,933, 931C/B, 931 SEALED AND LUBRICATED TRACK

JAPAN USE ONLY
STEPPED BUSHING
935C/B, 931C/B, 931: (36 & 37 SECTIONS)
933C,933: (39 SECTION 4MS1-UP, 5JS1-UP, 8FL1-UP, 9EL1-UP
6.125" (155.6 mm) PITCH - 9/16" BOLT

PART NUMBER 36 Section 37 Section 39 Section

Link Assembly -- (Quantity 2) 154-3645 154-3644 154-3646
Track Links
RH Pin End Master 6Y-0937 1 1 1
LH Pin End Master 6Y-0938 1 1 1
RH Bushing End Master 6Y-0939 1 1 1
LH Bushing End Master 6Y-0940 1 1 1
RH Regular 6Y-0935 35 36 38
LH Regular 6Y-0936 35 36 38
Other Components
Pin 154-3660 36 37 39
Bushing 111-1522 36 37 39
Seal Assembly (Rigid) 250-4002 72 74 78
Thrust Ring 6S-9049 72 74 78
Stopper 5G-2247 36 37 39
Plug 6Y-0473 36 37 39
1
Track Hardware
Bolt 4K-7038 140 144 152
Nut 7K-2017 140 144 152
Master Bolt 5A-3187 4 4 4
Special Sets/Groups
Bushing and Seal Group (39 Sections) 206-3128 2 1 1 1
Seal Set (78 Seal Assemblies) 252-7861 1 1 1
1Not part of link assembly; required to assemble track group.
2Must order (5) 190-7396 sprocket segments to be used with the 206-3128 Bushing and Seal Gp. This group contains the large stepped bushing
54 mm diameter.

419
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 935B, 933, 931C, 931B, 931 SEALED TRACK

STEPPED BUSHING
933(39 SECTION): 8FL1-UP, 9EL1-UP
6.125" (155.6 mm) PITCH - 9/16" BOLT

PART
NUMBER 36 SECTION 37 SECTION 39 SECTION
1
Link Assembly -- (Quantity 2) 6Y-1711 -- 6Y-1713 2
Track Links
RH Pin End Master 6Y-0937 1 1 1
LH Pin End Master 6Y-0938 1 1 1
RH Bushing End Master 6Y-0939 1 1 1
LH Bushing End Master 6Y-0940 1 1 1
RH Regular 6Y-0935 35 36 38
LH Regular 6Y-0936 35 36 38
Other Components
Pin 6B-5278 36 37 39
Bushing 6Y-1717 36 37 39
Seal 6S-3146 144 148 156
3
Track Hardware
Bolt 4K-7038 140 144 152
Nut 7K-2017 140 144 152
Master Bolt 5A-3187 4 4 4
1 Order 36 Section 6Y-1711 or 39 Section 6Y-1713 Link Assembly and add or remove appropriate number of sections.
2 Early 933 traxcavator (11A, 25A, 42A) used 6.75" (171.5 mm) pitch track; refer to parts book for details.
3 Not part of link assembly; required to assemble track group.

420
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 935B, 931C, 931B, 931 SEALED AND LUBRICATED TRACK

STRAIGHT WALL BUSHING, SPLIT MASTER
6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 -- 1
Track Links
RH Pin End Master 1 6S-6889
LH Pin End Master 1 6S-6890
RH Bushing End Master 1 6S-6887
LH Bushing End Master 1 6S-6888
RH Regular 35 6S-8343
LH Regular 35 6S-8344
Other Components
Pin 36 154-3660
Bushing 36 6S-9051
Seal Assembly (Rigid) 72 250-4002
Thrust Ring 72 6S-9049
Stopper 36 5G-2247
Plug 36 6Y-0473
2
Track Hardware
Bolt 140 4K-7038
Nut 140 7K-2017
Master Bolt 4 5A-3187
Special Sets/Groups
Seal Set (78 Seal Assemblies) 1 252-7861
1 If 36 or 37 section link assemblies are required, upgrade to link assemblies using "6Y" track links. This will require ordering new shoes to be used
with "6Y" track links.
2 Not part of link assembly; required to assemble track group.

421
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 935B, 931C, 931B, 931 SEALED TRACK

STRAIGHT WALL BUSHING, SPLIT MASTER, SHORT UNDERCARRIAGE
6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 -- 1
Track Links
RH Pin End Master 1 6S-6889
LH Pin End Master 1 6S-6890
RH Bushing End Master 1 6S-6887
LH Bushing End Master 1 6S-6888
RH Regular 35 6S-8343
LH Regular 35 6S-8344
Other Components
Pin 36 6B-5278
Bushing 36 6S-3178
Seal 144 6S-3146
2
Track Hardware
Bolt 140 4K-7038
Nut 140 7K-2017
Master Bolt 4 5A-3187
Special Sets/Groups
Pin and Bushing Group (35 Sections) 1 6S-9561
1 Upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly and add or subtract appropriate number of sections. This will
require ordering new shoes to be used with "6Y" track links.
2 Not part of link assembly; required to assemble track group.

422
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 935B, 931C, 931B, 931 SEALED TRACK

STRAIGHT WALL BUSHING, SHORT UNDERCARRIAGE
6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 -- 1
Track Links
RH Master (Full) 1 6S-8084
LH Master (Full) 1 6S-8085
RH Regular 35 6S-8343
LH Regular 35 6S-8344
Other Components
Pin 35 6B-5278
Master Pin 1 8L-5560
Bushing 35 6S-3178
Master Bushing 1 6S-3179
Seal 144 6S-3146
Spacer 2 6S-3145
Track Hardware 2
Bolt 144 4K-7038
Nut 144 7K-2017
Special Sets/Groups
Pin and Bushing Group (35 Sections) 1 6S-9561
1 Upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly and add or subtract appropriate number of sections. This will
require ordering new shoes to be used with "6Y" track links.
2 Not part of link assembly; required to assemble track group.

423
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

931 SEALED TRACK

6.125" (155.6 mm) PITCH -- 1/2" BOLT

QUANTITY PART NUMBER

Link Assembly (36 Section) 2 6S-3142
Track Links
RH Master (Full) 1 6S-3147
LH Master (Full) 1 6S-3148
RH Regular 35 6S-3143
LH Regular 35 6S-3144
Other Components
Pin 35 6B-5278
Master Pin 1 8L-5560
Bushing 35 6S-3178
Master Bushing 1 6S-3179
Seal 144 6S-3146
Spacer 2 6S-3145
Track Hardware 1
Bolt 144 8H-7504
Nut 144 6S-3419
Special Sets/Groups
Pin and Bushing Group (35 Sections) 1 6S-9561
1 Not part of link assembly; required to assemble track group.

935C, 935B, 933C, 933, 931C, 931B, 931 TRACK SHOES 1

FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS
9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 2 14.0" (355 mm) 6Y-1328 6Y-1329
2
Single Grouser - Moderate Service 16.0" (405 mm) 6Y-1381 6Y-1382
Single Grouser - Moderate Service 2 20.0" (510 mm) 6Y-1383 6Y-1384
2
Single Grouser - Moderate Service 25.0" (635 mm) 6Y-1385 6Y-1386
Double Grouser 14.0" (355 mm) 9N-4174 9N-4175
Double Grouser 25.0" (635 mm) 6Y-1589 6Y-1590
Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597
Triple Grouser (Rubber Bonded) 14.0" (355 mm) 9N-4328 9N-4327
Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102
1 933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book
for details
2 Increased overlap shoe profile; for use with 6Y track links only.

424
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 931C TRACK SHOES 1

STRAIGHT WALL BUSHING, SPLIT MASTER, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS
9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 12.0" (305 mm) 6S-8814 6S-7123
Single Grouser - Moderate Service 14.0" (355 mm) 6S-8815 6S-9057
Single Grouser - Moderate Service 16.0" (405 mm) 9W-4334 9W-4335
Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124
Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597
1 Includes 935B, 931B and 931 model machines.

931 TRACK SHOES

1/2" BOLT

TYPE WIDTH PART NUMBER

Single Grouser - Moderate Service 12.0" (305 mm) 6S-3423
Single Grouser - Moderate Service 16.0" (405 mm) 6S-3422
Triple Grouser 14.0" (355 mm) 6S-3149

935C, 933C, 931C SPROCKETS 1

SEGMENT DESIGN

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 8Y-6559
Sprocket Segment (5 Tooth) (Tough Steel) 5 190-7396
Sprocket Segment (5 Tooth) (Japan Use Only) 5 9W-9266
Adapter Ring (Weld-On) 1 6Y-5499
Bolt 25 9W-9265
Nut 25 8H-5724
Washer 25 5P-8245
1Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A)
used 6.75" (171.5 mm) pitch track; Refer to parts book for details

935C, 933C, 931C SPROCKETS 1

ONE PIECE DESIGN

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (25 Tooth) 1 8Y-0622
Rim (Weld-On Sprocket) (25 Tooth) 1 6Y-1244
1Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A)
used 6.75" (171.5 mm) pitch track; Refer to parts book for details

425
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 933C, 931C IDLERS 1

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 2 -- -- 2
Components of Group
Idler Assembly 1 8E-7342 106-9187
Idler Shell 1 -- 9N-4173
3
Bearing (Sleeve) 2 6Y-4744 --
Bushing Assembly 3 2 -- 6S-3495
Bearing 4 1 -- 6Y-4744
Shaft 1 8E-7343 6S-3697
Washer Thrust 2 6Y-2110 6S-7715
Bearing Block 1 8Y-1697 6S-3451
Bearing Block 1 8Y-1698 6S-3453
Seal -- Duo-Cone Group 2 1M-8746 1M-8746
4
Toric Ring 2 8H-2265 6S-3284
Shaft O-Ring 2 1H-9696 1H-9696
Plate Assembly 4 6S-7220 6S-7220
Bolt 8 5P-2566 5P-2566
Washer 8 7X-0584 7X-0584
Lock 2 5M-5000 5M-5000
Bolt 4 8C-6877 8C-6877
Washer 4 7X-0618 7X-0618
Stopper 1 7G-4332 --
Plug 1 6Y-0473 9F-2247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656 5P-0373
4
Toric Ring 2 8S-5653 3N-3095
1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A)
used 6.75" (171.5 mm) pitch track; Refer to parts book for details
2 Order either 164-1047 or 185-4037 idler groups
3 Component of Idler Assembly.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

426
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 933C, 931C CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6S-3609
Components of Group
Roller Shell 1 172-0160
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 4H-9527
Collar Assembly 1 1M-7918
Bolt 5 0L-1351
Washer 5 3B-4506
Seal -- Duo-Cone Group 1 9W-5224
2
Toric Ring 2 1M-3097
Cover 1 4H-9628
Shaft O-Ring 1 1H-9696
Plate 1 6K-9860
Bolt 2 6V-4791
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
2
Toric Ring 2 2S-2181
1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A)
used 6.75" (171.5 mm) pitch track; Refer to parts book for details
2 Component of preceding group; quantity shown is the quantity per group.

427
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 933C, 931C TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 4 231-3080
2
Single Flange (SF) 6 231-3079
Components of Group
Roller Shell (DF) 1 6S-7040
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
3
Bearing 1 6Y-4744
Shaft 1 6S-3171
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal -- Duo-Cone Group 2 216-2957
Toric Ring 3 2 216-2956
Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
4
Mounting Hardware
Bolt 4 0S-1585
Washer 4 2M-0849
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
3
Toric Ring 2 3N-3095
1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A)
used 6.75" (171.5 mm) pitch track; Refer to parts book for details
2 933C Requires 8 Single Flange Roller Gps
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

428
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

933C TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (RH Outer) 1 128-9545
Guard Assembly (LH Outer) 1 128-9546
Guard Assembly (RH Inner) 1 132-6622
Guard Assembly (LH Inner) 1 132-6615
Bolt 16 7X-0351
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 130-1437
Guard Assembly (LH Inner) 1 130-1428
Bolt 8 5C-6565
Washer 8 5P-1076
Guard Assembly (Top RH) 1 128-9473
Guard Assembly (Top LH) 1 128-9474
Bolt 6 5S-7379
Washer 6 5P-1075
Guard 2 128-9555
Bolt 2 4L-6454
Washer 2 5P-1075
Bolt 4 7X-0288
Washer 4 5P-1075
Spacer 4 130-1433

933C TRACK ROLLER GUARDS (FULL LENGTH)

USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 138-1937
Guard Assembly 2 138-1936
Bolt 16 8T-8917
Nut 16 8T-4223
Tab (Front) 4 8Y-3413
Bolt 4 4L-6454
Washer 4 8T-4896
Plate (Rear) 4 138-1946
Plate (Rear) 4 138-1945
Bolt 8 8T-8917
Washer 8 8T-4223
Pipe 8 8Y-1009
Bolt 8 6M-9613
Nut 16 8T-4223

429
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

935C, 935B, 931C, 931B SPROCKET/IDLER TRACK FRAME GUARDS 1

(PER MACHINE) QUANTITY PART NUMBER

Roller Frame Guard (RH) 1 -- 2
Roller Frame Guard (LH) 1 -- 3
Idler Guard 2 8Y-8964
Sprocket Guard (RH) 1 8Y-8967
Sprocket Guard (LH) 1 8Y-8968
Wiper Guard (RH) 1 8Y-8977
Wiper Guard (LH) 1 8Y-8978
Bracket 2 6S-6741
Bolt 34 5S-7379
Bolt 6 8T-8917
Washer 34 5P-1075
Washer 6 8T-4223
1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of this
package is to shed material and prevent its entry into the undercarriage system (link box area)
2 Guard (LH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y6660 Tab Assembly.
3 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y6660 Tab Assembly.

933 SPROCKET/IDLER TRACK FRAME GUARDS 1

STD

(PER MACHINE) QUANTITY PART NUMBER

Roller Frame Guard (RH) 1 -- 2
Roller Frame Guard (LH) 1 -- 3
Idler Guard 2 104-4122
Sprocket Guard (RH) 1 8Y-8967
Sprocket Guard (LH) 1 8Y-8968
Wiper Guard (RH) 1 8Y-8977
Wiper Guard (LH) 1 8Y-8978
Bracket 2 6S-6741
Bolt 34 5S-7379
Bolt 6 8T-8917
Washer 34 5P-1075
Washer 6 8T-4223
1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of this
package is to shed material and prevent its entry into the undercarriage system (link box area)
2 Guard (LH) 103-8836 serviced by (1) 139-5742 Guard Assembly and (1) 8Y6660 Tab Assembly.
3 Guard (LH) 103-8837 serviced by (1) 139-5741 Guard Assembly and (1) 8Y6660 Tab Assembly.

430
 Track-Type Loaders
935C, 935B, 933C, 933, 931C, 931B, 931

933 SPROCKET/IDLER TRACK FRAME GUARDS 1

LGP

(PER MACHINE) QUANTITY PART NUMBER

Roller Frame Guard (RH) 1 104-4129
Roller Frame Guard (LH) 1 104-4130
Idler Guard 2 104-4122
Sprocket Guard (RH) 1 8Y-8967
Sprocket Guard (LH) 1 8Y-8968
Wiper Guard (RH) 1 8Y-8977
Wiper Guard (LH) 1 8Y-8978
Bracket 2 6S-6741
Bolt 34 5S-7379
Bolt 6 8T-8917
Washer 34 5P-1075
Washer 6 8T-4223
1This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of this
package is to shed material and prevent its entry into the undercarriage system (link box area)

935C, 933C, 933, 931C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (RH) 2 102-5920
Guard Assembly (LH) 2 102-5921

431
 Track-Type Loaders
939C, 939

939C, 939 SEALED AND LUBRICATED TRACK

LARGE STEPPED BUSHING
6DS, 9GL
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 227-9960
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-9263
LH Pin End Master 1 6Y-9264
RH Bushing End Master 1 9G-8585
LH Bushing End Master 1 9G-8586
RH Regular 36 6Y-9261
LH Regular 36 6Y-9262
Other Components
Pin 37 160-7816 1
Bushing 37 224-3959
Seal Assembly (Rigid) 74 250-4000
Thrust Ring 74 6Y-6486
Stopper 37 5G-2247
Plug 37 6Y-0473
Track Hardware 2
Bolt 144 9G-3110
Nut 144 1M-1408
Master Bolt 2 3T-8601
Master Bolt 2 9G-8592
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 252-7860
Bushing and Seal Group (39 Sections) 1 227-9954
1 Former pin 6Y-9260 (use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group

432
 Track-Type Loaders
939C, 939

939C, 939 SEALED AND LUBRICATED TRACK

6DS, 9GL
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 -- 1
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-9263
LH Pin End Master 1 6Y-9264
RH Bushing End Master 1 9G-8585
LH Bushing End Master 1 9G-8586
RH Regular 36 6Y-9261
LH Regular 36 6Y-9262
Other Components
Pin 37 160-7816 2
Bushing 37 9G-8588
Seal Assembly (Rigid) 74 250-4000
Thrust Ring 74 6Y-6486
Stopper 37 5G-2247
Plug 37 6Y-0473
Track Hardware 3
Bolt 144 9G-3110
Nut 144 1M-1408
Master Bolt 2 3T-8601
Master Bolt 2 9G-8592
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 252-7860
Bushing and Seal Group (39 Sections) 1 -- 4
1 Serviced replaced by (1) 227-9960 link assembly, (2) 197-9677 sprocket segments, and (3) 197-9678 sprocket segments.
2 Former pin 6Y-9260 (use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group
4 Order (1) 227-9954 Seal and Bushing Group, (2) 197-9677 Sprocket Segments, and (3) 197-9678 Sprocket Segments.

433
 Track-Type Loaders
939C, 939

939C, 939 ROTATING BUSHING TRACK 1

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 150-4373
Components of Link Assembly
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master 2 1 109-0488
2
LH Bushing End Master 1 109-0489
2
RH Regular 36 109-0486
LH Regular 2 36 109-0487
Other Components
Pin 37 152-8075
Bushing 37 109-0478
Seal Assembly (Rigid) 148 250-3992
Thrust Ring 148 152-8069
Stopper 37 5G-2247
Plug 37 6Y-0473
Track Hardware 3
Bolt 144 9G-3110
Nut 144 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
1 Rotating Bushing Track is an application specific undercarriage, designed for high abrasion/low impact applications (4000 hour system life or
less). When installing Rotating Bushing Track on existing machines, refer to IRM UC98-19 for adaptability, installation and guarding information
2 Contains link and insert. Insert is not serviced.
3 Not part of the link assembly; required to assemble track group.

939C, 939 TRACK SHOES

TYPE WIDTH PART NUMBER

Single Grouser - Moderate Service 18.0" (460 mm) 3T-0360
Double Grouser 16.0" (405 mm) 102-3585
Double Grouser 18.0" (460 mm) 102-3587

939C SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 112-8980
Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677
Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678
Bolt 23 6V-0937

434
 Track-Type Loaders
939C, 939

939 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 118-3539
Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677
Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678
Bolt 23 6V-0937
Nut 23 7H-3607
Washer 23 2S-5658

939C, 939 SPROCKETS

ROTATING BUSHING TRACK

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677
Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678
Bolt 23 6V-0937
1
Nut 23 7H-3607
Washer 1 23 2S-5658
1 Not required for Hystat machines (only bolts).

435
 Track-Type Loaders
939C, 939

939C, 939 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 -- 1
Components of Groups
Idler Assembly 1 9U-9065
Bushing Assembly 2 1V-9611
2
Bushing 1 7K-1089
Shaft 1 8E-7899
Bearing Block 1 8Y-6650
Bearing Block 1 8Y-6651
Seal -- Duo-Cone Group 2 9W-5224
2
Toric Ring 2 1M-3097
Bolt 12 9B-7237
Washer 12 8T-4896
Stopper 1 7G-4332
Plug 1 6Y-0473
Lock 2 5M-5000
Bolt 2 8C-6877
Washer 2 7X-0618
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
1 Order either 164-1048 or 185-4038 idler groups.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

436
 Track-Type Loaders
939C, 939

939C, 939 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Washer 3 5M-2894
Plate 1 6K-9860
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding group; quantity shown is the quantity per group

437
 Track-Type Loaders
939C, 939

939C, 939 TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)
9GL0496-UP

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 4 124-8240
Single Flange (SF) 8 124-8237
1
Tall Flange Double (TFD) - 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 2 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
End Collar 2 132-1951
Ring 2 6H-7382
Ring (Retaining-Snap) 2 6V-6768
Seal -- Duo-Cone Group 2 2M-2858
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
Bolt 4 1A-8537
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 5K-1770
Seal -- Shaft O-Ring 2 8M-5661
1 Optional DF Roller for guiding; use required for specific roller frame type.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

438
 Track-Type Loaders
939C, 939

939 TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Double Flange (DF) 4 -- 1
Single Flange (SF) 8 -- 2
Components of Group
Roller Shell (DF) 1 7G-4832
Roller Shell (SF) 1 7G-4833
Bearing 3 2 8P-7002
Shaft 1 8E-6573
Retainer Assembly 2 3T-9538
Thrust Ring 4 1 9G-9351
Dowel 4 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
3
Toric Ring 1 8P-7003
3
O-Ring 1 6V-2699
Seal -- Retainer 2 1H-6227
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
End Cap 2 7G-4829
Bolt 4 1B-4367
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
3
Toric Ring 1 7T-4087
O-Ring 3 1 6V-2699
1 Upgrade to 124-8240 roller group.
2 Upgrade to 124-8237 roller group.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

939C END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 152-7182
Left Outer, Right Inner 2 152-7183

439
Track-Type Loaders
939C, 939

939 END GUIDING GUARDS

FORMER MODEL

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 8Y-8908
Left Outer, Right Inner 2 8Y-8909
Rear (Guard Assembly)
Right Outer, Left Inner 2 8Y-8912
Left Outer, Right Inner 2 8Y-8911

939C TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (RH Outer) 1 132-3829
Guard Assembly (LH Outer) 1 132-6625
Guard Assembly (RH Inner) 1 132-3830
Guard Assembly (LH Inner) 1 132-3849
Bolt 16 7X-0353
Washer 16 8T-4122
Guard Assembly (RH Inner) 1 132-3831
Guard Assembly (LH Inner) 1 132-3832
Bolt 8 5C-6565
Washer 8 5P-1076
Guard Assembly (Top RH) 1 132-4676
Guard Assembly (Top LH) 1 132-4677
Bolt 4 5S-7379
Washer 4 5P-1075
Guard 2 132-3861
Bolt 6 4L-6454
Washer 6 5P-1075

440
 Track-Type Loaders
939C, 939

939C, 939 TRACK ROLLER GUARDS (WITH SPROCKET GUARD)

CURRENT MODEL (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 138-1934
Guard Assembly 2 138-1935
Pipe 8 8Y-7125
Bolt 16 8T-8917
Bolt 8 8S-3887
Bolt 4 4L-6454
Washer 4 8T-4896
Washer 24 8T-4223
Nut 3 6V-8188
Tab 4 8Y-3413
Plate 4 138-1945
Plate 4 138-1946
Bolt 8 8T-8919
Washer 8 5P-8245

939 TRACK ROLLER GUARDS (WITHOUT SPROCKET GUARD)

FORMER MODEL (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 8Y-7120
Guard Assembly 2 8Y-7121
Pipe 10 8Y-7125
Bolt 20 8T-8917
Bolt 10 8S-3887
Bolt 8 4L-6454
Washer 8 8T-4896
Washer 30 8T-4223
Nut 10 6V-8188
Tab 8 8Y-3413

939C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (RH) 2 105-0929
Guard Assembly (LH) 2 105-0930

441
 Track-Type Loaders
941

941 SEALED AND LUBRICATED TRACK

16U, 70H, 75H, 80H
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 38 Section 2 154-3647
Track Links
RH Pin End Master 1 1V-4603
LH Pin End Master 1 1V-4604
RH Bushing End Master 1 1V-4605
LH Bushing End Master 1 1V-4606
RH Regular 37 9K-6629
LH Regular 37 9K-6628
Other Components
Pin 38 154-3664 1
Bushing (Stepped) 38 7T-4628
Seal Assembly (Rigid) 76 250-4004
Thrust Ring 76 1V-3361
Stopper 38 5G-2247
Plug 38 6Y-0473
2
Track Hardware
Bolt 148 7H-3597
Nut 148 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 154-3654
Seal Set (80 Seal Assemblies) 1 252-7862
1 Former pin 9K-8550 (use 9G-1642 stopper)
2 Not part of link assembly; required to assemble track group.

442
 Track-Type Loaders
941

941 SEALED TRACK

16U, 70H, 75H, 80H
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 38 Section 2 1V-7074
Track Links
RH Pin End Master 1 1V-4603
LH Pin End Master 1 1V-4604
RH Bushing End Master 1 1V-4605
LH Bushing End Master 1 1V-4606
RH Regular 37 9K-6629
LH Regular 37 9K-6628
Other Components
Pin 38 9K-4060
Bushing 38 9K-4061
Seal 152 7K-2018
1
Track Hardware
Bolt 148 7H-3597
Nut 148 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 1V-8623
1 Not part of link assembly; required to assemble track group.

443
 Track-Type Loaders
941

941 FORMER SEALED TRACK

16U, 70H, 75H, 80H
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 38 Section 2 -- 1
Track Links
RH Master (Full) 1 9K-0029
LH Master (Full) 1 9K-0028
RH Regular 37 9K-6629
LH Regular 37 9K-6628
Other Components
Pin 37 9K-4060
Master Pin 1 9K-4062
Bushing 37 9K-4061
Master Bushing 1 7K-2020
Seal 152 7K-2018
Spacer 2 9K-4059
Track Hardware 2
Bolt 152 7H-3597
Nut 152 1M-1408
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 1V-8623
1 Upgrade to 1V-7074 Link Assembly
2 Not part of link assembly; required to assemble track group.

444
 Track-Type Loaders
941

941 TRACK
LARGE O.D. BUSHING
16U, 70H, 75H, 80H
6.75" (171.5 mm) PITCH -- 9/16" BOLT

FORMER
QUANTITY PART NUMBER
Link Assembly -- 38 Section 2 7K-2051
Track Links
RH Regular 38 7K-1825
LH Regular 38 7K-1826
Other Components
Pin 37 4B-6166
Master Pin 1 4K-3919
Bushing 37 7K-2019
Master Bushing 1 7K-2020
Seal (Sealed Track) 152 7K-2018
Spacer 2 7K-2016
1
Track Hardware
Bolt 152 4K-7038
Nut 152 7K-2017
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 3V-2712
1 Not part of link assembly; required to assemble track group.

445
 Track-Type Loaders
941

941 TRACK
SMALL O.D. BUSHING
16U, 70H, 75H, 80H
6.75" (171.5 mm) PITCH -- 9/16" BOLT

FORMER
QUANTITY PART NUMBER
Link Assembly -- 38 Section 2 -- 1
Track Links
RH Regular 38 5K-9457
LH Regular 38 5K-9458
Other Components
Pin 37 4B-6166
Master Pin 1 4K-3919
Bushing 37 4K-3918
Master Bushing 1 4M-0740
Seal (Sealed Track) 152 5K-2707
Spacer 2 4K-3916
2
Track Hardware
Bolt 152 4K-7038
Nut 152 7K-2017
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 3V-2711
1 Upgrade to 7K-2051 Link Assembly.
2 Not part of link assembly; required to assemble track group.

941 TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 13.0" (330 mm) 206-3507 206-3515
Double Grouser 13.0" (330 mm) 8E-4807 8E-4808
Double Grouser 14.0" (355 mm) 8E-4805 6I-8780
Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 1
1 Double Grouser Master

941 TRACK SHOES

6.75" (171.5 mm) PITCH -- 9/16" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 13.0" (330 mm) 5K-8566
Triple Grouser 14.0" (355 mm) 7K-1548

446
 Track-Type Loaders
941

941 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (29 Tooth) 1 4V-4106
Rim (29 Tooth) 1 4V-4107

941 IDLERS
STRAIGHT SHAFT, 9K BLOCKS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 1M-8867
Other Components
Bushing Assembly 2 1V-9611
1
Bearing 1 7K-1089
Shaft 1 8E-7899
Bearing Block 1 9K-8857
Bearing Block 1 9K-9113
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Bushing O-Ring 2 1H-8128
Shaft O-Ring 2 7F-8267
Bolt 12 1A-2029
Washer 12 3B-4506
Plug 1 6Y-0473
Stopper 1 7G-4332
Lock 1 5M-5000
Bolt 1 0T-0772
Washer 1 4K-9943
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

447
 Track-Type Loaders
941

941 IDLERS
STEPPED SHAFT, 4K BLOCKS

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Idler Assembly 2 1M-8867
Other Components
Bushing Assembly 2 1V-9611
1
Bearing 1 7K-1089
Shaft 1 4K-9984
Bearing Block 1 4K-5285
Bearing Block 1 4K-5286
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Bushing O-Ring 2 1H-8128
Shaft O-Ring 2 4F-7952
Plug 1 1S-8947
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Lock 1 5M-5000
Bolt 1 0T-0772
Washer 1 4K-9943
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

448
 Track-Type Loaders
941

941 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Washer 3 5M-2894
Plate 1 6K-9860
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding group; quantity shown is the quantity per group.

449
 Track-Type Loaders
941

941 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 6 118-1609
Single Flange (SF) 4 118-1608
Components of Group
Roller Shell (DF) 1 9P-7786
Roller Shell (SF) 1 9P-7782
Bushing Assembly 2 1V-9611
1
Bearing 1 7K-1089
Shaft 1 118-1610 2
End Collar 2 118-1616 3
Retaining Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
1
Toric Ring 2 1M-3097
Bushing O-Ring 2 1H-8128
Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
Bolt 4 1A-1135
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Bushing O-Ring 2 5K-1770
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Replaces former 3K-6616 shaft; requires 2 -- 118-1616 end collars.
3 If 3K-6616 shaft is used, use 2 -- 5K-7187 end collars.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

450
 Track-Type Loaders
941

941 END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Front (Outer LH, Inner RH)
Guard Assembly 1 7K-2944
Wear Strip 1 5V-3875
Bolt 4 031-0221
Front (Outer RH, Inner LH)
Guard Assembly 1 7K-2943
Wear Strip 1 5V-3875
Bolt 4 031-0221
Rear (Outer RH)
Guard Assembly 1 7K-2961
Wear Strip 1 5V-3876
Bolt 4 031-0221
Rear (Outer LH)
Guard Assembly 1 7K-2962
Wear Strip 1 5V-3876
Bolt 4 031-0221

941 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 7K-4439
Bolt 16 031-0221
Washer 8 4D-3704
Bar 4 7V-3687
Spacer 8 9M-7783
Bolt 8 6K-0137

451
 Track-Type Loaders
943

943 TRACK
LARGE O.D. BUSHING, HIGH RAIL LINK
19Z, 3Y, 31Y, 4Z
6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 38 Section 2 154-3661
Components of Link Assembly
Track Links
RH Pin End Master 1 7T-4175
LH Pin End Master 1 7T-4176
RH Bushing End Master 1 7T-4177
LH Bushing End Master 1 7T-4178
RH Regular 37 7T-4173
LH Regular 37 7T-4174
Other Components
Pin 38 154-3664 1
Bushing 38 7T-4628
Seal Assembly (Rigid) 76 250-4004
Thrust Ring 76 1V-3361
Stopper 38 5G-2247
Plug 38 6Y-0473
Track Hardware 2
Bolt 148 7H-3597
Nut 148 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 154-3654
Seal Set (80 Seal Assemblies) 1 252-7862
1 Former pin 9K-8550 (Use 9G-1643 stopper).
2 Not part of link assembly; required to assemble track group

452
 Track-Type Loaders
943

943 TRACK
D4E TRACK LINKS
19Z, 3Y, 31Y, 4Z
6.75" (171.5 mm) PITCH -- 5/8" BOLT

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Link Assembly -- 38 Section 2 154-3647
Components of Link Assembly
Track Links
RH Pin End Master 1 1V-4603
LH Pin End Master 1 1V-4604
RH Bushing End Master 1 1V-4605
LH Bushing End Master 1 1V-4606
RH Regular 37 9K-6629
LH Regular 37 9K-6628
Other Components
Pin 38 154-3664 1
Bushing 38 7T-4628
Seal Assembly (Rigid) 76 250-4004
Thrust Ring 76 1V-3361
Stopper 38 5G-2247
Plug 38 6Y-0473
Track Hardware 2
Bolt 148 7H-3597
Nut 148 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 154-3654
Seal Set (80 Seal Assemblies) 1 252-7862
1 Former pin 9K-8550 (use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group

943 TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Double Grouser 13.0" (330 mm) 8E-4807 8E-4808
Double Grouser 14.0" (355 mm) 8E-4805 6I-8780
Double Grouser (LGP) 18.0" (460 mm) 8E-4799 8E-4800
Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 1
1 Double Grouser Master.

453
 Track-Type Loaders
943

943 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (5 Tooth) 5 6Y-5661
Bolt 20 3S-8182
Nut 20 7H-3607

943 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-1315
Other Components
Bushing Assembly 2 1V-9611
1
Bearing 1 7K-1089
Shaft 1 8E-7899
Seal -- Duo-Cone Group 2 9W-5224
1
Toric Ring 2 1M-3097
Bushing O-Ring 2 1H-8128
Shaft O-Ring 2 7F-8267
Bolt 12 9B-7237
Washer 12 8T-4896
Stopper 1 7G-4332
Plug 1 6Y-0473
Lock 2 5M-5000
Bolt 2 8C-6877
Washer 2 7X-0563
Swing Link 1 8G-3170
Swing Link 1 8G-3172
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

454
 Track-Type Loaders
943

943 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Washer 3 5M-2894
Plate 1 6K-9860
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

455
 Track-Type Loaders
943

943 TRACK ROLLERS 1

CURRENT MODEL (END COLLARS SYMMETRIC SEALS)

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 4 124-8240
Single Flange (SF) 8 124-8237
2
Tall Flange Double (TFD) - 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 2 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
End Collar 2 132-1951
Ring 2 6H-7382
Ring (Retaining-Snap) 2 6V-6768
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 3 2 1M-3097
Bushing O-Ring 2 1H-8128
Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
Bolt 4 1A-8537
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
3
Toric Ring 2 2S-2181
Bushing O-Ring 2 5K-1770
Shaft O-Ring 2 8M-5661
1 For use with high rail 7T4173/74 links.
2 Optional DF Roller for guiding; use quantity required for specific roller frame type.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

456
 Track-Type Loaders
943

943 TRACK ROLLERS 1

FORMER MODEL (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 4 --
Single Flange (SF) 8 --
Components of Group
Roller Shell (DF) 1 7G-4832
Roller Shell (SF) 1 7G-4833
Bearing 2 2 8P-7002
Shaft 1 8E-6573
Retainer Assembly 2 3T-9538
Thrust Ring 3 1 9G-9351
Dowel 3 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
2
Toric Ring 1 8P-7003
2
O-Ring 1 6V-2699
Retainer 2 1H-6227
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
End Cap 2 7G-4829
Bolt 4 1B-4367
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
2
Toric Ring 1 7T-4087
O-Ring 2 1 6V-2699
1 For use with high rail 7T4173/74 links.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 These components are only to repair retainer assembly. See Special Instruction SEHS8515.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

457
 Track-Type Loaders
943

943 TRACK ROLLERS 1

EARLY MODEL

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 4 118-1609
Single Flange (SF) 8 118-1608
Components of Group
Roller Shell (DF) 1 9P-7786
Roller Shell (SF) 1 9P-7782
Bushing Assembly 2 1V-9611
2
Bearing 1 7K-1089
Shaft 1 118-1610 3
End Collar 2 118-1616 4
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
2
Toric Ring 2 1M-3097
Bushing O-Ring 2 1H-8128
Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt 4 1A-1135
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
Bushing O-Ring 2 5K-1770
Shaft O-Ring 2 8M-5661
1 For use with 9K-6628 and 9K-6629 links.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Replaces former 3K-6616 shaft; requires 2 -- 118-1616 end collars.
4 If 3K-6616 shaft is used, use 2 -- 5K-7187 end collars.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

458
 Track-Type Loaders
943

943 END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 1 3W-8410
Left Outer, Right Inner 1 3W-8407
Wear Strip 2 7P-7208
Bolt 8 5P-2228
Rear (Guard Assembly)
Right Outer, Left Inner 1 8G-6781
Left Outer, Right Inner 1 8G-6792
Wear Strip 2 8G-6793
Bolt 10 5P-2228

459
 Track-Type Loaders
951

951 SEALED AND LUBRICATED TRACK

15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 154-3672
Track Links
RH Pin End Master 1 3P-3043
LH Pin End Master 1 3P-3044
RH Bushing End Master 1 3P-3045
LH Bushing End Master 1 3P-3046
RH Regular 38 3P-7153
LH Regular 38 3P-7154
Other Components
Pin 39 160-7818 1
Bushing 39 7T-4636
Seal Assembly (Rigid) 78 250-3990
Thrust Ring 78 3P-3878
Stopper 39 5G-2247
Plug 39 6Y-0473
2
Track Hardware
Bolt 152 7H-3597
Nut 152 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 154-3659
Seal Set (92 Seal Assemblies) 1 252-7859
1 Former pin 3P-3880 (use 9G-1642 stopper).
2 Not part of the link assembly; required to assemble track group.

460
 Track-Type Loaders
951

951 SEALED TRACK

15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 3P-5757
Track Links
RH Pin End Master 1 3P-3043
LH Pin End Master 1 3P-3044
RH Bushing End Master 1 3P-3045
LH Bushing End Master 1 3P-3046
RH Regular 38 3P-7153
LH Regular 38 3P-7154
Other Components
Pin 39 6B-5502
Bushing 39 5S-0710
Seal 156 5S-0709
1
Track Hardware
Bolt 152 7H-3597
Nut 152 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4234
1 Not part of the link assembly; required to assemble track group.

461
 Track-Type Loaders
951

951 EXTENDED WEAR LIFE TRACK

15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 154-3662 1
Track Links
RH Pin End Master 1 7T-4541
LH Pin End Master 1 7T-4542
RH Bushing End Master 1 7T-4543
LH Bushing End Master 1 7T-4544
RH Regular 38 7T-4539
LH Regular 38 7T-4540
Other Components
Pin 39 160-7818 2
Bushing 39 7T-4636
Seal Assembly (Rigid) 78 250-3990
Thrust Ring 78 3P-3878
Stopper 39 5G-2247
Plug 39 6Y-0473
3
Track Hardware
Bolt 152 7H-3597
Nut 152 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 154-3659
Seal Set (92 Seal Assemblies) 1 252-7859
1 Note: Extended wear life link assemblies require special rollers and idlers to match the high rail link; Refer to roller and idler section for details.
2 Former pin 3P-3880 (use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

951 TRACK SHOES

6.91" (175.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 15.0" (380 mm) 9K-3028 4V-7410
Single Grouser - Moderate Service 16.0" (405 mm) 5S-0820 3P-3888
Single Grouser - Moderate Service 18.0" (460 mm) 5S-0821 3P-3889
Single Grouser - Moderate Service 20.0" (510 mm) 5S-0822 3P-3890
Double Grouser 14.0" (355 mm) 8E-4727 8E-4728
Double Grouser 15.0" (380 mm) 8E-4724 8E-4725
Triple Grouser (Center Punched Slots) 13.7" (348 mm) 9G-6389 8E-4728 1
Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 1
Triple Grouser (Center Punched Slots) 15.0" (380 mm) 6K-1910 8E-4725 1
1 Double Grouser Master

462
 Track-Type Loaders
951

951 SPROCKETS
86J1992-UP
6.91" (175.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (30 Tooth) 1 4V-5374
Rim (30 Tooth) 1 4V-5376

951 SPROCKETS
79H, 86J1-1991
6.75" (171.5 MM) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (30 Tooth) 1 5K-3436
Rim (30 Tooth) 1 8A-1378 1
1 For conversion from 6.75" (171.5 mm) pitch to 6.91" (175.5 mm) pitch, use 4V-5376 rim in place of 8A-1378 rim.

951 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 8S-2560
1
Extended Wear Assembly 2 7T-3501
Other Components
Bushing Assembly 2 3P-8272
2
Bearing 1 8P-6652
Shaft 1 5K-0305
Bearing Block (Out RH, In LH) 1 9G-8301
Bearing Block (Out LH, In RH) 1 9G-8300
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Bushing O-Ring 2 1H-6227
Shaft O-Ring 2 7F-8267
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 For use with Extended Wear Life Track.
2 Component of preceding assembly or group; quantity shown is per assembly or group.

463
 Track-Type Loaders
951

951 CARRIER ROLLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Group 4 -- 1 5A-8374
Components of Group
Roller Shell 1 2S-0205 5A-8375
Shaft 1 5M-1914 3T-3207
Cup 2 1M-7911 9S-3581
Cone 2 1M-7912 9S-3582
Ring 1 1M-7914 1M-7914
Cover 1 5M-2043 5M-2043
Collar 1 1M-7918 9S-3567
Support 1 1M-7915 --
Plug 1 2P-0347 2P-0347
Bolt 3 0S-1594 0S-1594
Seal -- Duo-Cone Group 1 9W-5224 6Y-0925
Toric Ring 2 2 1M-3097 8H-2262
Seal -- Cover 1 2H-6338 2H-6338
Seal -- Support 1 4H-9105 --
Seal -- Plug 1 1S-8947 1S-8947
Seal -- Shaft O-Ring 1 1H-9696 1H-9696
Ring 1 1M-7916 --
Nut 1 1M-7913 --
Plate 1 -- 8P-6188
Bolt 2 -- 5K-9107
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 5K-6191 4S-8984
3
Toric Ring 2 2S-2181 9M-9730
1 Upgrade to 5A-7384 group.
2 Component of preceding group; quantity shown is the quantity per group.
3 Component of preceding assembly or group; quantity shown is per assembly or group.

464
 Track-Type Loaders
951

951 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

1
Double Flange (DF) 4 118-1612
1
Single Flange (SF) 6 118-1611
2 1
Extended Wear Life (DF) 4 118-1633
Extended Wear Life (SF) 2 61 118-1632
Components of Group
Roller Shell (DF) 1 9S-9534
Roller Shell (SF) 1 9S-9535
2
Extended Wear Life Shell (DF) 1 9W-8350
Extended Wear Life Shell (SF) 2 1 9W-8353
Bushing Assembly 2 2P-8045
3
Bearing 1 8P-6652
Shaft 1 118-1613 4
End Collar 2 5M-0627 5
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 3 2 1M-3097
Bushing O-Ring 2 1H-6227
Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
6
Mounting Hardware
Bolt 4 8S-9092
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
3
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 6 - DF and 4 - SF rollers required for early 951 machines (15F, 79H, 78J, and 86J1-785).
2 For use with Extended Wear Life Track.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Replaces former 5M-1915 shaft; requires 2 -- 5M-0627 end collars.
5 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

465
 Track-Type Loaders
951

951 END GUIDING GUARDS 1

(PER MACHINE) QUANTITY PART NUMBER

Front (Outer LH, Inner RH)
Guard Assembly 1 7K-3712
Wear Strip 1 7K-3703
Bolt 4 5K-8454
Front (Outer RH, Inner LH)
Guard Assembly 1 7K-3711
Wear Strip 1 7K-3703
Bolt 4 5K-8454
Rear (Outer RH)
Guard Assembly 1 7K-3713
Wear Strip 1 7K-3704
Bolt 4 5K-8454
Rear (Outer LH)
Guard Assembly 1 7K-3714
Wear Strip 1 7K-3704
Bolt 4 5K-8454
1 These end guiding guards can be used on 951B's with 6.91" pitch and 6.75" pitch.

466
 Track-Type Loaders
953D, 953C, 953B, 953

953D/C/B SystemOne TRACK

Press Fit Master
7.50" (190.5 mm) PITCH 20 mm BOLT

QUANTITY PART NUMBER

Link Assembly - 37 Section 2 243-0499
Components of Link Assembly
Link Box Standard 17 298-2723 1
Link Box Offset 1 298-2724 2
Standard Link 34 235-2501
Standard Link (Press Fit) 3 2 235-2501
3
Track Hardware
Bolt (20 mm) 148 6Y-0846
Nut 148 9W-3361
1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.
2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9769.
3 Not part of link assembly; required to assemble track group.

953D/C/B SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBER

Link Assembly Used 243-0499
Double Grouser Shoe -- 19.7" (500 mm) 2 243-0495

467
 Track-Type Loaders
953D, 953C, 953B, 953

953C HYBRID TRACK

BBX
7.50" (190.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 230-7272
Track Links
RH Pin End Master 1 244-6571
LH Pin End Master 1 244-6572
RH Bushing End Master 1 244-6573
LH Bushing End Master 1 244-6574
RH Regular 36 229-6909
LH Regular 36 229-6910
Other Components
Pin 37 160-7818 1
Bushing 37 229-6915
Seal Assembly (Rigid) 74 250-3988
Thrust Ring 74 6Y-6481
Stopper 37 5G-2247
Plug 37 6Y-0473
2
Track Hardware
Bolt 144 9G-3110
Nut 144 1M-1408
Master Bolt 2 3T-8580
Master Bolt 2 3T-8601
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 252-7855
Bushing and Seal Group (37 Sections) 1 193-9146
1 Former pin 3P-3880 (use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group.

953C MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBER

Link Assembly Used 230-7272
Double Grouser Shoe -- 19.7" (500 mm) 2 230-7273

468
 Track-Type Loaders
953D, 953C, 953B, 953

953C HEAVY DUTY SEALED AND LUBRICATED TRACK

BBX
7.50" (190.5 mm) - PITCH 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 106-1635
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 36 106-1625
LH Regular 36 106-1626
Other Components
Pin 37 179-0126
Bushing 37 106-1618
Seal Assembly (Rigid) 74 250-3988
Thrust Ring 74 152-8070
Stopper 37 5G-2247
Plug 37 6Y-0473
1
Track Hardware
Bolt 144 6V-1792
Nut 144 1S-1860
Master Bolt 2 107-0719
Master Bolt 2 106-1642
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 252-7855
Bushing and Seal Group (37 Sections) 1 115-2439
1 Not part of link assembly; required to assemble track group.

469
 Track-Type Loaders
953D, 953C, 953B, 953

953C ROTATING BUSHING TRACK 1

BBX
7.50" (190.5 mm) PITCH - 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 152-8044
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
2
RH Bushing End Master 1 165-1752
LH Bushing End Master 2 1 165-1753
2
RH Regular 36 165-1750
LH Regular 2 36 165-1751
Other Components
Pin 37 156-4701
Bushing 37 165-1768
Seal Assembly (Rigid) 74 250-3988
Thrust Ring 74 152-8070
Stopper 37 5G-2247
Plug 37 6Y-0473
3
Track Hardware
Bolt 144 6V-1792
Nut 144 1S-1860
Master Bolt 2 107-0719
Master Bolt 2 106-1642
1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or
less).
2 Joint Assemblies ( include link and insert). Insert not serviced
3 Not part of link assembly; required to assemble track group.

470
 Track-Type Loaders
953D, 953C, 953B, 953

953C, 953B, 953 TRACK

2ZN, 20Z, 44Z, 5MK, 5Z, 76Y, 77Y, 78Y
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 40 Section 2 154-3677
Track Links
RH Pin End Master 1 7T-4541
LH Pin End Master 1 7T-4542
RH Bushing End Master 1 7T-4543
LH Bushing End Master 1 7T-4544
RH Regular 39 7T-4539
LH Regular 39 7T-4540
Other Components
Pin 40 160-7818 1
Bushing 40 7T-4636
Seal Assembly (Rigid) 80 250-3990
Thrust Ring 80 3P-3878
Stopper 40 5G-2247
Plug 40 6Y-0473
2
Track Hardware
Bolt 156 7H-3597
Nut 156 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 154-3659
Seal Set (92 Seal Assemblies) 1 252-7859
1 Former pin 3P-3880 (use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group.

953C MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBER

Link Assembly Used 154-3677
Double Grouser Shoe -- 19.7" (500 mm) 2 8E-5281

953D SystemOne TRACK SHOES

7.50" (190.5 mm) PITCH 20 mm BOLT

TYPE WIDTH PART NUMBER

Double Grouser 15.0" (380 mm) 244-4534
Double Grouser 18.9" (480 mm) 300-3658
Double Grouser (Center Opening) 18.9" (480 mm) 300-3660

471
 Track-Type Loaders
953D, 953C, 953B, 953

953C/B SystemOne TRACK SHOES

7.50" (190.5 mm) PITCH 20 mm BOLT

TYPE WIDTH PART NUMBER

Double Grouser 15.0" (380 mm) 244-4534
Double Grouser 19.7" (500 mm) 243-0501
Double Grouser (Center Opening) 19.7" (500 mm) 264-1110

953C TRACK SHOES

BBX
7.50" (190.5 mm) PITCH - 5/8" BOLT

TYPE WIDTH PART NUMBER

Extreme Service 20" (510 mm) 6Y-9416
Double Grouser 15.0" (380 mm) 230-7269
Double Grouser 19.7" (500 mm) 230-7177
Double Grouser (Trapezoidal Opening) 19.7" (500 mm) 233-7230

953C, 953B, 953 TRACK SHOES

6.91" (171.5 mm) PITCH - 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service (Trapezoidal Opening) 1 15.0" (380 mm) 6Y-5185 6Y-5186
2
Double Grouser 15.0" (380 mm) 8E-4724 8E-4725
Double Grouser 19.7" (500 mm) 8E-4722 8E-4723
3
Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 4
Triple Grouser 15.0" (380 mm) 6K-1910 8E-4725 4
2
Rubber 19.7" (500 mm) 112-8139 112-8136
1 Trapezoidal opening.
2 LGP use only.
3 Slotted Center Punched.
4 Double Grouser Master.

953C TRACK SHOE

RBT & HD LINK ASSEMBLY
7.50" (190.5 mm)PITCH - 3/4 BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Double Grouser 15.0" (380 mm) 187-2005 187-2006
Double Grouser 19.7" (500 mm) 187-2003 187-2004

472
 Track-Type Loaders
953D, 953C, 953B, 953

953D SystemOne Sprockets

LBP
7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9672
Bolt 25 6V-0937

953C SPROCKETS
BBX (Hybrid, Heavy Duty, Rotate Bushing, and SystemOne Track)
7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9672
Bolt 25 197-9674
Nut (Square) 25 196-4672

953C SystemOne SPROCKETS

2ZN Machines

(PER SIDE) QUANTITY PART NUMBER

Sprocket - Rim (25 Tooth) 1 258-9802
Bolt (16 mm) 27 197-9674
Nut (Square) 27 196-4672

953B SystemOne SPROCKETS

5MK Machines

(PER SIDE) QUANTITY PART NUMBER

Sprocket - Rim (25 Tooth) 1 258-9803
Bolt (5/8 Inch) 27 6V-0937
Nut 27 7H-3607

473
 Track-Type Loaders
953D, 953C, 953B, 953

953C SPROCKETS
6.91" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (4 Tooth) 3 212-4205 1
Sprocket Segment (Tough Steel) (5 Tooth) 3 212-4206 2
Sprocket Segment (Non Abrasive Applications) 9 185-6152
Bolt (Fine Thd) (16mm) 27 197-9674
Nut (Fine Thd) (Square) 27 196-4672
1 Former 3 tooth segment design has been replaced by 3 - 212-4205 segments & 3 - 212-4206 segments.
2 Former 3 tooth segment design has been replaced by 3 - 212-4205 segments & 3 -212-4206 segments.

953B SPROCKETS
6.91" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (3 Tooth) 9 187-4845
Sprocket Segment (3 Tooth) 9 185-6151
Bolt 27 6V-0937
Nut 27 7H-3607

474
 Track-Type Loaders
953D, 953C, 953B, 953

953D SytemOne IDLERS

CONVENTIONAL IDLERS
LBP

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-3501
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 166-0613
Seal -- Duo-Cone Group 2 2M-2858
1
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8268
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Lock 2 5M-5000
Bolt 2 7X-0311
Washer 2 7X-0563
Swing Link 1 279-9322
Swing Link 1 279-9325
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

475
 Track-Type Loaders
953D, 953C, 953B, 953

953C/B SystemOne CENTER TREAD IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 228-4230
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 166-0613
Seal -- Duo-Cone Group 2 9W-5224
1
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8268
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Lock 2 5M-5000
Bolt 2 7X-0311
Washer 2 7X-0563
Swing Link 1 166-2121
Swing Link 1 166-2123
Plate - Scraper (Mounts to Yoke) 2 280-1417
Bolt (12 mm) 6 8T-4139
Washer 6 8T-4223
Shim (Install between TRF and Idler Guards) 6 279-9120
Bolt (16 mm) 12 7X-2554
Washer 12 8T-4122
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

476
 Track-Type Loaders
953D, 953C, 953B, 953

953C IDLERS
2ZN2609-UP, BBX

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-3501
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 166-0613
Seal -- Duo-Cone Group 2 9W-5224
1
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8268
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Lock 2 5M-5000
Bolt 2 7X-0311
Washer 2 7X-0563
Swing Link 1 166-2121
Swing Link 1 166-2123
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

477
 Track-Type Loaders
953D, 953C, 953B, 953

953C, 953B, 953 IDLERS

FORMER DESIGN

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-3501
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 5K-0305
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Lock 2 5M-5000
Bolt 2 7X-0311
Washer 2 7X-0563
Swing Link 1 7P-7911
Swing Link 1 7P-7912
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

953D/C/B SystemOne CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Carrier Roller Group 2 229-5446

478
 Track-Type Loaders
953D, 953C, 953B, 953

953C, 953B, 953 CARRIER ROLLERS

20Z3520-UP, 2ZN1-UP, 5MK1-UP, BBX

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6Y-3908
Components of Group
Roller Shell 1 5A-8375
Shaft 1 6Y-2043
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Plate 1 8P-6188
Bolt 2 5K-9107
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

479
 Track-Type Loaders
953D, 953C, 953B, 953

953 CARRIER ROLLERS

20Z1-3519

(PER MACHINE) QUANTITY PART NUMBER

Group 2 5A-8374
Components of Group
Roller Shell 1 5A-8375
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Plate 1 8P-6188
Bolt 2 5K-9107
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

953D/C SystemOne TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) Roller Group 12 240-9557
1
Mounting Hardware
Cap 2 223-9110
Bolt (16 mm) 4 8T-0281
Washer 4 9X-8268
1 These components are not included in the roller group; quantities shown are requried to mount each roller.

480
 Track-Type Loaders
953D, 953C, 953B, 953

953C, 953B TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)
2ZN218-UP, 5MK2689-UP

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 4 121-0827
Single Flange (SF) 8 121-0824
1
Tall Flange Double (TFD) - 121-0830
Components of Group
Roller Shell (DF) 1 121-0828
Roller Shell (SF) 1 121-0825
Roller Shell (DF) (Tall Flange) 1 121-0831
Bushing Assembly 2 121-0834
Bearing 1 8P-6652
Shaft 1 131-8742
Ring (Retaining-Snap) 2 121-1257
Ring (Lock) 2 6H-7382
End Collar 2 131-9352
Seal -- Duo-Cone Group 2 9W-5224
2
Toric Ring 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 3
Bolt - Current 953 (16 mm) 4 4 6V-3303
Bolt - Early 953 (5/8") 4 4 8S-9092
Washer (5/8")/16mm 4 5P-8247
1Optional DF roller for guiding; use quantity required for the specific roller frame type.
2Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3These components are not included in the roller group; quantities shown are required to mount each roller.
4953 machine effectivity for 16mm roller mounting bolts (20Z3520-UP, 5MK1-UP); All Early 953 serial numbers (76Y, 77Y, 78Y, 5Z, 20Z, 44Z, and
20Z1-3519) require 5/8" English mounting bolts.

481
 Track-Type Loaders
953D, 953C, 953B, 953

953B, 953 TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY PART NUMBER

Roller Group (DF) 4 --
Roller Group (SF) 8 --
Components of Group
Roller Shell (DF) 1 9P-1362
Roller Shell (SF) 1 9P-1367
Bearing 1 2 9P-1360
Shaft 1 3T-9875
Retainer Assembly 2 3T-9877
Thrust Washer 2 1 9G-9351
Dowel 2 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
1
Toric Ring 1 8P-7003
1
O-Ring 1 6V-2699
Seal -- Retainer O-Ring 2 5H-6734
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
End Cap 2 8E-0281
Bolt - Current 953 (16 mm) 4 4 8T-0281
4
Bolt - Early 953 (5/8") 4 1B-4367
Washer (5/8")/16mm 4 5P-8247
1Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2These components are only to repair retainer assembly. See Special Instruction SEHS8515.
3These components are not included in the roller group; quantities shown are required to mount each roller.
4953 machine effectivity for 16mm roller mounting bolts (20Z3520-UP, 5MK1-UP); All Early 953 serial numbers (76Y, 77Y, 78Y, 5Z, 20Z, 44Z, and
20Z1-3519) require 5/8" English mounting bolts.

953D END GUIDING GUARDS (FRONT)

USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 255-1075
Left Outer, Right Inner 2 255-1076

482
 Track-Type Loaders
953D, 953C, 953B, 953

953C/B END GUIDING GUARDS (FRONT)

USE WITH HYBIRD AND SystemOne

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 5G-9662
Left Outer, Right Inner 2 5G-9660
Wear Strip 4 8Y-1853
Bolt 16 8T-4139
Washer 16 8T-4223

953C END GUIDING GUARDS (FRONT)

USE WITH ROTATING BUSHING AND HEAVY DUTY TRACK
7.50" (190.5mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 208-0764
Left Outer, Right Inner 2 208-0763
Wear Strip 4 192-3185
Bolt 16 8T-4139
Washer 16 8T-4223

953 END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 3W-8410
Left Outer, Right Inner 2 3W-8407
Wear Strip 4 7P-7208
Bolt 16 5P-2228
Rear (Guard Assembly)
Right Outer, Left Inner 2 8G-6921
Left Outer, Right Inner 2 8G-6926
Wear Strip 4 8G-6927
Bolt 20 5P-2228

483
Track-Type Loaders
953D, 953C, 953B, 953

953D TRACK GUIDING GUARDS (REAR SPROCKET)

USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 254-5288
Rear Guard -- Left Outer, Right Inner 2 254-5289
Bolt (M16) (Short) (Guard to Frame) 8 8T-4140
Bolt (M16) (Long) (Guard to Frame) 8 7X-2475
Washer 16 8T-4122
Plate 2 310-8310
Plate 2 310-8311
Plate Assembly 2 310-8312
Bolt (M12) (Plate to Plate Assembly) 18 8T-4139
Bolt (M12) (Plate to Guard ) 8 8T-4192
Washer 26 8T-4223

953C/B TRACK GUIDING GUARDS (REAR SPROCKET)

USE WITH HYBIRD AND SytemOne

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 8Y-1841
Rear Guard -- Left Outer, Right Inner 2 8Y-1842
Bolt 8 8T-4140
Bolt 8 7X-2475
Washer 16 8T-4122
Strip 4 3W-8536
Bolt 16 8T-4139
Washer 16 8T-4223
Plate Assembly 2 8Y-1990
Plate 2 8Y-1994
Plate 2 8Y-1993
Bolt 18 8T-4139
Bolt 8 8T-4192
Washer 26 8T-4223

484
 Track-Type Loaders
953D, 953C, 953B, 953

953C TRACK GUIDING GUARDS (REAR SPROCKET)

USE WITH ROTATING BUSHING AND HEAVY DUTY TRACK
7.50" (190.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 187-9317
Rear Guard -- Left Outer, Right Inner 2 187-9318
Bolt 8 8T-4140
Bolt 8 7X-2559
Washer 16 8T-4122
Wear Strip 4 192-3184
Bolt 34 8T-4139
Washer 42 8T-4223
Plate Assembly 2 8Y-1990
Plate 2 8Y-1994
Plate 2 8Y-1993
Bolt 8 8T-4192

953D TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 254-5290
Guard Assembly 2 254-5291
Bolt (M16) (Guard Assembly to Frame) 16 8T-4779
Washer 16 8T-4122
Spacer 8 7P-7368
Rod 8 8Y-2281
Washer 16 8T-4122
Nut 16 8T-4132
Plate 8 259-6864
Bolt (M12) (Plate to End Guard) 16 8T-4956
Washer 16 8T-4223

485
Track-Type Loaders
953D, 953C, 953B, 953

953C/B TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly
Right Outer, Left Inner 1 8Y-2276
Left Outer, Right Inner 1 8Y-2279
Bolt 16 8T-4779
Washer 16 8T-4122
Spacer 8 7P-7368
Rod 8 8Y-2281
Nut 16 8T-4132
Washer 16 8T-4122
Plate 8 8Y-2210
Bolt 16 8T-4183
Washer 16 8T-4223
Strip 4 8Y-2211
Strip 4 8Y-2212

953 TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly
Right Outer, Left Inner 1 7P-7369
Left Outer, Right Inner 1 7P-7373
Bolt 16 7X-0343
Washer 16 8T-4122
Spacer 8 7P-7368
Bolt 8 5P-4624
Nut 8 7X-0488
Washer 16 8T-4122
Plate 8 8G-4077
Bolt 16 8T-4835
Spacer 16 5F-7207

486
 Track-Type Loaders
953D, 953C, 953B, 953

953D SystemOne IDLER GUARDS

CONVENTIONAL IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 8Y-2429
Bolt (M12) 12 8T-4139
Washer 12 5P-1076
Guard Assembly 2 261-7105
Guard Assembly 2 264-7098
Guard Assembly 2 264-7099
Bolt (M12) 12 8T-4192
Bolt (M12) 8 8T-4194
Washer 20 5P-1076

953D SystemOne IDLER SCRAPER

(PER MACHINE) QUANTITY PART NUMBER

Guard - Scraper 4 7P-7732
Bolt (M12) 12 8T-4139
Washer 12 8T-4223

487
 Track-Type Loaders
955

955 SEALED AND LUBRICATED TRACK

HYBRID LINKS
13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 236-9861
Track Links
RH Pin End Master 1 228-2737
LH Pin End Master 1 228-2738
RH Bushing End Master 1 228-2739
LH Bushing End Master 1 228-2740
RH Regular 35 228-2735
LH Regular 35 228-2736
Other Components
Pin 36 160-7819 1
Bushing 36 230-4512
Seal Assembly (Rigid) 72 207-0544
Thrust Ring 72 152-8071
Stopper 36 5G-2247
Plug 36 6Y-0473
2
Track Hardware
Bolt 140 1S-1859
Nut 140 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Seal Set (90 Seal Assemblies) 1 256-9360
Bushing and Seal Group (37 Sections) 1 293-9147
1 Former pin 3P-1108 (use 9G-1642 stopper).
2 Not part of link assembly; required to assemble track group.

488
 Track-Type Loaders
955

955 SEALED AND LUBRICATED TRACK

13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 180-0507 1
Track Links
RH Pin End Master 1 6Y-6743
LH Pin End Master 1 6Y-6744
RH Bushing End Master 1 6Y-6745
LH Bushing End Master 1 6Y-6746
RH Regular 35 3P-1112
LH Regular 35 3P-1113
Other Components
Pin 36 160-7819 2
Bushing 36 8E-5257
Seal Assembly (Rigid) 72 250-3996
Thrust Ring 72 3P-1104
Stopper 36 5G-2247
Plug 36 6Y-0473
3
Track Hardware
Bolt 140 1S-1859
Nut 140 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Bushing and Seal Group (36 Sections) 1 6I-8061
Seal Set (86 Seal Assemblies) 1 252-7857
1 Service replaced by 236-9861 hybrid link assembly.
2 Former pin 3P-1108 (use 9G-1642 stopper).
3 Not part of link assembly; required to assemble track group.

489
 Track-Type Loaders
955

955 SEALED TRACK

HYBRID TWO PIECE MASTER LINK
13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 238-9951
Track Links
RH Pin End Master 1 228-2737
LH Pin End Master 1 228-2738
RH Bushing End Master 1 228-2739
LH Bushing End Master 1 228-2740
RH Regular 35 228-2735
LH Regular 35 228-2736
Other Components
Pin 36 4M-5989
Bushing 36 237-7305
Seal-Washer 144 8M-7231
1
Track Hardware
Bolt 140 1S-1859
Nut 140 1S-1860
Master Bolt 4 9S-1838
1 Not part of link assembly; required to assemble track group.

490
 Track-Type Loaders
955

955 SEALED TRACK

TWO PIECE MASTER LINK
13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 3P-1088 1
Track Links
RH Pin End Master 1 6Y-6743
LH Pin End Master 1 6Y-6744
RH Bushing End Master 1 6Y-6745
LH Bushing End Master 1 6Y-6746
RH Regular 35 3P-1112
LH Regular 35 3P-1113
Other Components
Pin 36 4M-5989
Bushing 36 4M-5991
Seal 144 8M-7231
2
Track Hardware
Bolt 140 1S-1859
Nut 140 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 6P-4235
1 Service replaced by 238-9951 hybrid link assembly.
2 Not part of link assembly; required to assemble track group.

491
 Track-Type Loaders
955

955 SEALED TRACK

HYBRID ONE PIECE MASTER LINK
13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 238-9950
Track Links
RH Master 1 240-2503
LH Master 1 240-2504
RH Regular 35 228-2735
LH Regular 35 228-2736
Other Components
Pin 35 4M-5989
Master Pin 1 8E-0855
Bushing 35 237-7305
Master Bushing 1 237-7306
Seal 144 8M-7231
Spacer 2 8M-7290
Track Hardware 1
Bolt 144 1S-1859
Nut 144 1S-1860
1 Not part of link assembly; required to assemble track group.

492
 Track-Type Loaders
955

955 SEALED TRACK

NO MASTER LINK
13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 -- 1
Track Links
RH Regular 36 3P-1112
LH Regular 36 3P-1113
Other Components
Pin 35 4M-5989
Master Pin 1 8E-0855
Bushing 35 4M-5991
Master Bushing 1 4M-5992
Seal 144 8M-7231
Spacer 2 8M-7290
2
Track Hardware
Bolt 144 1S-1859
Nut 144 1S-1860
Special Sets/Groups
Pin and Bushing Group (36 Sections) 1 6P-4235
1 Upgrade to 238-9950 Hybrid One Piece Master Link Assembly.
2 Not part of link assembly; required to assemble track group.

493
 Track-Type Loaders
955

955 EXTENDED WEAR LIFE TRACK

RIGID SEAL, LARGE O.D. BUSHING
13X, 57M, 64J9258-UP, 71J5832-UP, 85J10129-UP
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 36 Section 2 117-1022 1
Track Links
RH Pin End Master 1 6Y-6747
LH Pin End Master 1 6Y-6748
RH Bushing End Master 1 6Y-6749
LH Bushing End Master 1 6Y-6750
RH Regular 35 7T-4645
LH Regular 35 7T-4646
Other Components
Pin 36 160-7819 2
Bushing 36 8E-5257 3
Seal Assembly (Rigid) 72 230-3996
Thrust Ring 72 3P-1104
Stopper 36 5G-2247
Plug 36 6Y-0473
4
Track Hardware
Bolt 140 1S-1859
Nut 140 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Bushing and Seal Group (36 Sections) 1 6I-8061
Seal Set (86 Seal Assemblies) 1 252-7857
1 Serviced replaced by 236-9861 Hybrid link assembly.
2 Former pin 3P-1108 (use 9G-1642 stopper)
3 If small O.D. bushing is required, use 3P-1109.
4 Not part of link assembly; required to assemble track group

494
 Track-Type Loaders
955

955 SEALED AND LUBRICATED TRACK

31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART
NUMBER 39 SECTION 41 SECTION
Link Assembly (Quantity 2) 154-3672 154-3667
Track Links
RH Pin End Master 3P-3043 1 1
LH Pin End Master 3P-3044 1 1
RH Bushing End Master 3P-3045 1 1
LH Bushing End Master 3P-3046 1 1
RH Regular 3P-7153 38 40
LH Regular 3P-7154 38 40
Other Components
Pin 160-7818 1 39 41
Bushing 7T-4636 2 39 41
Seal Assembly (Rigid) 250-3990 78 82
Thrust Ring 3P-3878 78 82
Stopper 5G-2247 39 41
Plug 6Y-0473 39 41
3
Track Hardware
Bolt 7H-3597 152 160
Nut 1M-1408 152 160
Master Bolt 3P-2274 4 4
Special Sets/Groups
Bushing and Seal Group (46 Sections) 154-3659 1 1
Seal Set (92 Seal Assemblies) 252-7859 1 1
1 Former pin 3P-3880 (use 9G-1642 stopper)
2 Service straight wall bushing track with 3P-3879 bushing.
3 Not part of link assembly; required to assemble track group.

495
 Track-Type Loaders
955

955 SEALED TRACK

31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A
6.91" (175.5 mm) PITCH -- 5/8" BOLT

PART
NUMBER 39 SECTION 41 SECTION
Link Assembly (Quantity 2) 3P-5757 1V-7077
Track Links
RH Pin End Master 3P-3043 1 1
LH Pin End Master 3P-3044 1 1
RH Bushing End Master 3P-3045 1 1
LH Bushing End Master 3P-3046 1 1
RH Regular 3P-7153 38 40
LH Regular 3P-7154 38 40
Other Components
Pin 6B-5502 39 41
Bushing 5S-0710 39 41
Seal 5S-0709 156 164
1
Track Hardware
Bolt 7H-3597 152 160
Nut 1M-1408 152 160
Master Bolt 3P-2274 4 4
Special Sets/Groups
Pin and Bushing Group (38 Sections) 6P-4234 1 1
1 Not part of link assembly; required to assemble track group.

496
 Track-Type Loaders
955

955 SEALED TRACK

ONE PIECE MASTER LINK
31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 -- 1
Track Links
RH Master (Full) 1 3P-7155
LH Master (Full) 1 3P-7156
RH Regular 38 3P-7153
LH Regular 38 3P-7154
Other Components
Pin 38 6B-5502
Master Pin 1 8M-7456
Bushing 38 5S-0710
Master Bushing 1 5S-0753
Seal 156 5S-0709
Spacer 2 5S-0754
Track Hardware 2
Bolt 156 7H-3597
Nut 156 1M-1408
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4234
1 Upgrade to 39 section 3P-5757 link assembly or 41 section 1V-7077 link assembly..
2 Not part of link assembly; required to assemble track group.

955 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Double Grouser 17.0" (430 mm) 8E-4501 8E-4502
Triple Grouser 17.0" (430 mm) 2V-5114 8E-4502 1
1 Double Grouser Master

497
 Track-Type Loaders
955

955 TRACK SHOES

6.91" (175.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 15.0" (380 mm) 9K-3028 4V-7410
Double Grouser 14.0" (355 mm) 8E-4727 8E-4728
Double Grouser 15.0" (380 mm) 8E-4724 8E-4725
Triple Grouser (Center Punched Slots) 13.7" (348 mm) 9G-6389 8E-4728 1
Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 1
Triple Grouser (Center Punched Slots) 15.0" (380 mm) 6K-1910 8E-4725 1
1 Double Grouser Master

955 SPROCKETS
85J10129-UP, 13X 1
8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 1V-7873
Sprocket Segment (5 Tooth) 5 8E-4365
Mud/Snow Segment (5 Tooth) 5 8P-9454
Bolt 20 3S-8182
Nut 20 7H-3607
1 Use 3V-2093 Sprocket Hub for attatchment wide gauge.

955 SPROCKETS
48H, 53H, 31J, 57J, 64J, 71J, 61H, 85J1-10128 1
6.91" (175.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 7K-1311
Sprocket Segment (4 Tooth) 5 6T-7455
Sprocket Segment (3 Tooth) 3 6T-7456
Adapter Ring 1 6K-1261
Bolt 29 3S-8182
Nut 29 7H-3607
1 For Serial Numbers 85J10067-10128, use Sprocket Hub 1V-7873.

498
 Track-Type Loaders
955

955 IDLERS
85J10129-UP, 71J5832-UP, 64J9258-UP, 13X, 57M
8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 5M-5009
1
Extended Wear Idler Assembly 2 7T-4562
Other Components
Bushing Assembly 2 3P-1900
2
Bearing 1 8P-5197
Shaft 1 5M-5005
Bearing Block 1 5M-5003
Bearing Block 1 5M-5004
Seal -- Duo-Cone Group 2 6Y-0925
2
Toric Ring 2 8H-2262
Bushing O-Ring 2 1H-6227
Shaft O-Ring 2 5F-8000
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 2S-2182
Shaft O-Ring (Steel Mill) 2 8M-4436
1 For use with extended wear life track.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

499
 Track-Type Loaders
955

955 IDLERS
61H, 48H, 31J, 85J1-10128, 71J1-5831, 64J1-9257
6.91" (175.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 8S-2560
Other Components
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 5M-1913
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Bushing O-Ring 2 1H-6227
Shaft O-Ring 2 7F-8267
Bolt 12 0S-1587
Washer 12 3B-4508
Plug 1 2B-7408
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

500
 Track-Type Loaders
955

955 CARRIER ROLLERS

8.00" (203.2 mm) PITCH: 13X, 57M, 64J9258-UP, 85J10129-UP, 71J5832-UP
6.91" (175.5 mm) PITCH: 60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-5831

(PER MACHINE) QUANTITY PART NUMBER

Group 2 5A-8374
Components of Group
Roller Shell 1 5A-8375
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 5K-9107
Seal -- Duo-Cone Group 1 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

501
 Track-Type Loaders
955

955 STANDARDIZED TRACK ROLLERS

64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M
8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 6 288-0935
Single Flange (SF) 6 288-0934
Double (DF) (Arctic) 6 288-0946
Single Flange (SF) (Arctic) 6 288-0945
Double Flange (DF) (High Heat) 6 288-0948
Single Flange (SF) (High Heat) 6 288-0947
1
Mounting Hardware (3/4")
Cap 2 317-9079
Bolt (3/4") 4 1D-4610
Washer 4 5P-8248
1
Mounting Hardware (5/8")
Cap 2 317-9078
Bolt (5/8") 4 1D-4585
Washer 4 2S-0736
1 These components are not included in the roller group; quantities shown are required to mount each roller.

502
 Track-Type Loaders
955

955 TRACK ROLLERS

64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M
8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 6 118-1615 1
Single Flange (SF) 6 118-1614 2
Extended Wear Life (DF) (Requires 3/4" mounting hardware) 3 6 118-1635 4
3
Extended Wear Life (SF) (Requires 3/4" mounting hardware) 6 118-1634 5
Components of Group
Roller Shell (DF) 1 6Y-2904 1
Roller Shell (SF) 1 6Y-2902 2
Extended Wear Life Shell (DF) 3 1 9W-5411 4
3
Extended Wear Life Shell (SF) 1 9W-5408 5
Bushing Assembly 2 2P-8048
6
Bearing 1 8P-5197
Shaft 1 116-6702 7
End Collar 2 5M-4436 8
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 6Y-0925
6
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 2H-3928
Seal -- Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
Ring 2 5M-4443
9
Mounting Hardware
Bolt (5/8") 4 1A-8537
Washer 4 2S-0736
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
6
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 8S-5654
Shaft O-Ring (Steel Mill) 2 8M-4436
1 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
2 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
3 For use with Extended Wear Life Track.
4 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
5 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
6 Component of preceding assembly or group; quantity shown is per assembly or group.
7 Replaces former 5M-4448 shaft; requires 2 - 5M-4436 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group
(SF) 288-0934; AND 3/4" hardware 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248, OR 5/8" hardware 2 - End Cap 317-9078, 4 -
Bolt 1D-4585, 4 - Washer 2S-0736.
8 If 5M-4448 shaft is used, use 1 -- 5M-4436 and 1 -- 5M-4435 end collar.
9 These components are not included in the roller group; quantities shown are required to mount each roller.

503
 Track-Type Loaders
955

955 TRACK ROLLERS

60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 64J1-9257, 85J1-10128, 71J1-5831
6.91" (175.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 118-1612
Single Flange (SF) 4 118-1611
Components of Group
Roller Shell (DF) 1 9S-9534
Roller Shell (SF) 1 9S-9535
Bushing Assembly 2 2P-8045
1
Bearing 1 8S-5796
Shaft 1 118-1613 2
End Collar 2 5M-0627 3
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Ring 2 6H-7382
Mounting Hardware 4
Bolt 4 8S-9092
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
Bushing O-Ring 2 2S-2182
Shaft O-Ring 2 8M-5661
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Replaces former 5M-1915 shaft; requires 2 -- 5M-0627 end collars.
3 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

504
 Track-Type Loaders
955

955 END GUIDING GUARDS

64J9258-UP, 85J10129-UP, 71J15832-UP, 13X, 57M

(PER MACHINE) QUANTITY PART NUMBER

Front (Outer LH, Inner RH)
Guard Assembly 1 1V-8176
Wear Strip 1 7K-3703
Bolt 4 5K-8454
Front (Outer RH, Inner LH)
Guard Assembly 1 1V-8173
Wear Strip 1 7K-3703
Bolt 4 5K-8454
Rear (Outer RH)
Guard Assembly 1 1V-8187
Wear Strip 1 7K-3704
Bolt 4 5K-8454
Rear (Outer LH)
Guard Assembly 1 1V-8202
Wear Strip 1 7K-3704
Bolt 4 5K-8454

955 END GUIDING GUARDS

48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-5831

(PER MACHINE) QUANTITY PART NUMBER

Front (Outer LH, Inner RH)
Guard Assembly 1 7K-3712
Wear Strip 1 7K-3703
Bolt 4 5K-8454
Front (Outer RH, Inner LH)
Guard Assembly 1 7K-3711
Wear Strip 1 7K-3703
Bolt 4 5K-8454
Rear (Outer RH)
Guard Assembly 1 7K-3713
Wear Strip 1 7K-3704
Bolt 4 5K-8454
Rear (Outer LH)
Guard Assembly 1 7K-3714
Wear Strip 1 7K-3704
Bolt 4 5K-8454

505
Track-Type Loaders
955

955 CENTER GUIDING GUARDS

64J9258-UP, 71J5832-UP, 85J10129-UP, 13X, 57M

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 1P-0963
Wear Strip 4 3V-1133
Bolt 8 6H-1717
Lock Washer 16 3B-4508
Bolt 16 1D-4608

955 CENTER GUIDING GUARDS

48H, 53H, 61H, 31J, 57J, 64J1-9257, 71J1-5831, 85J1-10128

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 7K-4347
Lock Washer 16 4D-3704
Bolt 16 031-0221

506
 Track-Type Loaders
963D, 963C, 963B, 963

963D SystemOne TRACK

PRESS FIT MASTER
LCS
8.00" (203.2 mm) PITCH - 22 mm BOLT

QUANTITY PART NUMBER

Link Assembly - 38 Section 2 256-9612
Components of Link Assembly
Link Box Standard 19 297-4786 1
Standard Link 36 234-9699
2
Standard Link (Press Fit) 2 234-9699
Track Hardware 2
Bolt (22 mm) 152 6Y-9024
Nut 152 9W-4381
1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9763.
2 Not part of link assembly; required to assemble track group.

963D SystemOne TRACK

CLAMP MASTER
LCS
8.00" (203.2 mm) PITCH - 22 mm BOLT

QUANTITY PART NUMBER

Link Assembly - 38 Section 2 256-9612
Components of Link Assembly
Link Box Standard 19 297-4786 1
Standard Link 36 234-9699
Standard Link (Clamp Master) 2 2 198-7722
2
Track Hardware
Bolt (22 mm) 148 6Y-9024
Nut 148 9W-4381
Master Bolt (22 mm) 3 4 254-0224
1Link Box Standard that is greater than 40% worn should be replaced with part number 264-9763.
2Not part of link assembly; required to assemble track group.
3It is recommended that track bolt 254-0224 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and /or bolt
breakage.

507
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B, 963 SystemOne TRACK

PRESS FIT MASTER
8.00" (203.2 mm) PITCH - 22 mm BOLT

QUANTITY PART NUMBER

Link Assembly - 37 Section 2 231-3714
Components of Link Assembly
Link Box Standard 17 297-4786 1
Link Box Offset 1 297-4787 2
Standard Link 34 234-9699
Standard Link (Press Fit) 3 2 234-9699
3
Track Hardware
Bolt (22 mm) 148 6Y-9024
Nut 148 9W-4381
1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9763.
2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9768.
3 Not part of link assembly; required to assemble track group.

963C/B, 963 SystemOne TRACK

CLAMP MASTER
8.00" (203.2 mm) PITCH - 22 mm BOLT

QUANTITY PART NUMBER

Link Assembly - 37 Section 2 231-3714
Components of Link Assembly
Link Box Standard 17 297-4786 1
Link Box Offset 1 297-4787 2
Standard Link 34 234-9699
3
Standard Link (Clamp Master) 2 198-7722
Track Hardware 3
Bolt (22 mm) 144 6Y-9024
Nut 144 9W-4381
Master Bolt (22 mm) 4 4 254-0224
1Link Box Standard that is greater than 40% worn should be replaced with part number 264-9763.
2Link Box Offset that is greater than 40% worn should be replaced with part number 264-9768.
3Not part of link assembly; required to assemble track group.
4It is recommended that track bolt 254-0224 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and /or bolt
breakage.

963C/B, 963 SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPS
TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBER

Link Assembly Used 231-3714
Double Grouser Shoe -- 22.0" (560 mm) 2 231-3715

508
 Track-Type Loaders
963D, 963C, 963B, 963

963C, 963B, 963 HYBRID TRACK

LARGE O.D. BUSHING
11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL, BBD
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 230-6167
Track Links
RH Pin End Master 1 228-2737
LH Pin End Master 1 228-2738
RH Bushing End Master 1 228-2739
LH Bushing End Master 1 228-2740
RH Regular 36 228-2735
LH Regular 36 228-2736
Other Components
Pin 37 160-7819 1
Bushing 37 230-4512
Seal Assembly (Rigid) 74 207-0544
Thrust Ring 74 152-8071
Stopper 37 5G-2247
Plug 37 6Y-0473
2
Track Hardware
Bolt 144 1S-1859
Nut 144 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Seal Set (90 Seal Assemblies) 1 256-9360
Bushing and Seal Groups (37 Sections) 1 293-9147
1 Former pin 3P-1108 (Use 9G-1642 Stopper)
2 Not part of link assembly; required to assemble track group.

963C, 963B, 963 MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITY PART NUMBER

Link Assembly Used 230-6167
Double Grouser Shoe -- 21.7" (550 mm) 2 230-6173

509
 Track-Type Loaders
963D, 963C, 963B, 963

963C, 963B, 963 TRACK

LARGE O.D. BUSHING
11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 117-1023 1
Track Links
RH Pin End Master 1 6Y-6747
LH Pin End Master 1 6Y-6748
RH Bushing End Master 1 6Y-6749
LH Bushing End Master 1 6Y-6750
RH Regular 36 7T-4645
LH Regular 36 7T-4646
Other Components
Pin 37 160-7819 2
Bushing 37 8E-5257
Seal Assembly (Rigid) 74 250-3996
Thrust Ring 74 3P-1104
Stopper 37 5G-2247
Plug 37 6Y-0473
3
Track Hardware
Bolt 144 1S-1859
Nut 144 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Bushing and Seal Group (36 Sections) 1 6I-8061
Seal Set (86 Seal Assemblies) 1 252-7857
1 Serviced replaced by 230-6167 hybrid link assembly.
2 Former pin 3P-1108 (Use 9G-1642 Stopper)
3 Not part of link assembly; required to assemble track group.

510
 Track-Type Loaders
963D, 963C, 963B, 963

963B, 963 TRACK

SMALL O.D. BUSHING
11Z, 18Z, 21Z, 29S, 48Z, 6Z, 9BL
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 -- 1
Track Links
RH Pin End Master 1 6Y-6747
LH Pin End Master 1 6Y-6748
RH Bushing End Master 1 6Y-6749
LH Bushing End Master 1 6Y-6750
RH Regular 36 7T-4645
LH Regular 36 7T-4646
Other Components
Pin 37 160-7819 2
Bushing 37 3P-1109
Seal Assembly (Rigid) 74 250-3996
Thrust Ring 74 3P-1104
Stopper 37 5G-2247
Plug 37 6Y-0473
3
Track Hardware
Bolt 144 1S-1859
Nut 144 1S-1860
Master Bolt 4 9S-1838
Special Sets/Groups
Bushing and Seal Group (36 Sections) 4 1 6I-8061
Seal Set (86 Seal Assemblies) 1 252-7857
1 Upgrade to 117-1023 Link Assembly.
2 Former pin 3P-1108 (Use 9G-1642 Stopper)
3 Not part of link assembly; required to assemble track group.
4 Contains 8E-5257 large O.D. bushings and rigid track seals.

511
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B ROTATING BUSHING TRACK

BBD
8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 37 Section 2 176-3692
Track Links
RH Pin End Master 1 8E-7407
LH Pin End Master 1 8E-7408
1
RH Bushing End Master 1 165-1756
LH Bushing End Master 1 1 165-1757
1
RH Regular 36 165-1754
LH Regular 1 36 165-1755
Other Components
Pin 37 160-7821
Bushing 37 165-1769
Seal Assembly (Rigid) 74 207-0544
Thrust Ring 74 152-8071
Stopper 37 5G-2247
Plug 37 6Y-0473
2
Track Hardware
Bolt 144 6V-1792
Nut 144 1S-1860
Master Bolt 4 9S-1838
Master Bolt 2 106-1642
1 Joint Assemblies ( include link and insert). Insert not serviced
2 Not part of link assembly; required to assemble track group.

963D SystemOne TRACK SHOES

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Double Grouser 17.7" (450 mm) 231-3713 256-4971
Double Grouser 21.7" (550 mm) 292-6379 292-6380
Double Grouser (Center Hole) 21.7" (550 mm) 292-6381 --

963C/B, 963 SystemOne TRACK SHOES

8.00" (203.2 mm) PITCH - 22 mm BOLT

TYPE WIDTH PART NUMBER

Double Grouser 17.7" (450 mm) 231-3713
Double Grouser (Center Opening) 17.7" (450 mm) 280-8722
Double Grouser 22.0" (560 mm) 231-3712
Double Grouser (Center Opening) 22.0" (560 mm) 285-4296
Single Grouser - Extreme Service (Center Opening) 18.0" (460 mm) 264-1108

512
 Track-Type Loaders
963D, 963C, 963B, 963

963C, 963B, 963 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392
Single Grouser - Extreme Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4985 1Q-4984
Single Grouser - Moderate Service 18.0" (460 mm) 6Y-6289 6Y-6290
Single Grouser - Moderate Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4921 1Q-4922
Double Grouser 17.7" (450 mm) 8E-4494 8E-4495
Double Grouser (Trapezoidal Opening) 17.7" (450 mm) 1Q-4610 1Q-4609
Double Grouser (Trapezoidal Opening) 1 21.7" (550 mm) 1Q-4640 1Q-4641
Double Grouser 1 21.0" (535 mm) 8E-4499 8E-4500
1
Double Grouser 21.7" (550 mm) 8E-4496 8E-4497
Triple Grouser 16.9" (430 mm) 2V-5114 8E-4502 2
Chopper (Trapezoidal Opening) 17.7" (450 mm) 8E-6977 8E-6978
1 LGP use only
2 Double Grouser shoe

963C/B TRACK SHOES

USE WITH ROTATING BUSHING TRACK
8.00" (203.2 mm) PITCH - 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 1Q-4625 1Q-4626
Double Grouser 17.7" (450 mm) 190-6079 8E-4495
Double Grouser 20.0" (510 mm) 8E-4498 8E-6114
Double Grouser 21.7" (550 mm) 127-7009 8E-4497

963D SystemOne SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (5 Tooth) 5 308-6854
Bolt 25 3S-8182
Nut 25 7H-3607

963C, 963B, 963 SPROCKETS

SystemOne, Hybrid, Rotating Bushing,and Sealed and Lubricated Track

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9673
Sprocket Segment (5 Tooth) 5 8E-4365
Bolt 20 3S-8182
Nut 20 7H-3607

513
 Track-Type Loaders
963D, 963C, 963B, 963

963D SystemOne IDLERS

CONVENTIONAL IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-4562
Other Components
Bushing Assembly 2 3P-1900
1
Bearing 1 8P-5197
Shaft 1 255-8060
Lock 2 5M-5000
Bolt 2 7X-0318
Washer 2 7X-0563
Seal -- Duo-Cone Group 2 1M-8747
1
Toric Ring 2 8H-2262
Seal -- Shaft O-Ring 2 1H-5728
Seal -- Bushing O-Ring 2 1H-6227
Bolt 12 9B-7237
Washer 12 8T-4896
Stopper 1 7G-4332
Plug 1 6Y-0473
Swing Link 1 286-4226
Swing Link 1 286-4227
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 4S-8984
1
Toric Ring 2 9M-9730
Seal -- Shaft O-Ring 2 8M-4395
Seal -- Bushing O-Ring 2 2S-2182
Stopper 1 3T-3800
Plug 1 3T-3799
1 Component of preceding group; quantity shown is the quantity per group.

514
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B, 963 SystemOne CENTER TREAD IDLER

(PER MACHINE) QUANTITY PART NUMBER

Idler 2 228-4231
Other Components
Bushing Assembly 2 3P-1900
1
Bearing 1 8P-5197
Shaft 1 8G-1450
Lock 2 5M-5000
Bolt 2 7X-0318
Washer 2 7X-0563
Seal -- Duo-Cone Group 2 6V-1915
1
Toric Ring 1 8H-2262
O-Ring 1 1 6V-1914
Bushing O-Ring 2 1H-6227
Bolt 12 9B-7237
Washer 12 8T-4896
Stopper 1 7G-4332
Plug 1 6Y-0473
Swing Link 1 8Y-2203
Swing Link 1 8Y-2204
Plate - Scraper (Mounts to Yoke) 1 258-6544
Plate - Scraper (Mounts to Yoke) 1 259-1072
Bolt (12 mm) 4 8T-4139
Washer 4 5P-1076
Shim (Install between TRF and Idler Guards) 2 255-5983
Bolt (20 mm) 2 8T-4187
Bolt (20 mm) 4 8T-6381
Washer 6 8T-4123
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 9W-1059
1
Toric Ring 1 9M-9730
O-Ring 1 1 9W-1057
Bushing O-Ring 2 2S-2182
Stopper 1 3T-3800
Plug 1 3T-3799
1 Component of preceding group; quantity shown is the quantity per group.

515
 Track-Type Loaders
963D, 963C, 963B, 963

963C, 963B, 963 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-4562
Other Components
Bushing Assembly 2 3P-1900
1
Bearing 1 8P-5197
Shaft 1 8G-1450
Lock 2 5M-5000
Bolt 2 7X-0318
Washer 2 7X-0563
Seal -- Duo-Cone Group 2 6V-1915
1
Toric Ring 1 8H-2262
O-Ring 1 1 6V-1914
Bushing O-Ring 2 1H-6227
Bolt 12 9B-7237
Washer 12 8T-4896
Stopper 1 7G-4332
Plug 1 6Y-0473
Swing Link 1 8Y-2203
Swing Link 1 8Y-2204
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 9W-1059
1
Toric Ring 1 9M-9730
O-Ring 1 1 9W-1057
Bushing O-Ring 2 2S-2182
Stopper 1 3T-3800
Plug 1 3T-3799
1 Component of preceding group; quantity shown is the quantity per group.

963D/C/B, 963 SystemOne CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Carrier Roller Group 2 235-5974

516
 Track-Type Loaders
963D, 963C, 963B, 963

963C, 963B, 963 CARRIER ROLLERS

LARGE DIAMETER SHAFT
21Z3442-UP, 2DS, 9BL, BBD

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6Y-1781
Components of Group
Roller Shell 1 9S-8320
Shaft 1 6Y-2043
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Bolt 2 5K-9107
Plate 1 8P-6188
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

517
 Track-Type Loaders
963D, 963C, 963B, 963

963 CARRIER ROLLERS

SMALL DIAMETER SHAFT
11Z, 18Z, 21Z1-3441, 29S, 48Z, 6Z

(PER MACHINE) QUANTITY PART NUMBER

Group 2 3T-3206
Components of Group
Roller Shell 1 9S-8320
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Bolt 2 5K-9107
Plate 1 1M-7913
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group

963D/C/B, 963 SystemOne TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) Roller Group 12 235-4157
1
Mounting Hardware
Cap (20 mm) 2 317-9080
Bolt (20 mm) 4 8T-0360
Washer 4 8T-3282
Cap (3/4") 2 317-9079
Bolt (3/4") 4 1D-4610
Washer 4 5P-8248
1 These components are not included in the roller group; quantities shown are requried to mount each roller.

518
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B STANDARDIZED TRACK ROLLERS

WITH END CAPS

QUANTITY PART NUMBER

Double Flange (DF) 6 288-0935
Single Flange (SF) 6 288-0934
Double Flange (DF) (Arctic) 6 288-0946
Single Flange (SF) (Arctic) 6 288-0945
Double Flange (DF) (High Heat) 6 288-0948
Single Flange (SF) (High Heat) 6 288-0947
1
Double Flange (DF) (Tall) - 288-0936
Mounting Hardware (Metric Hardware) 2
Cap 2 317-9080
Bolt (20 mm) 4 8T-0360
Washer 4 8T-3282
2
Mounting Hardware (Inch Hardware)
Cap 2 317-9079
Bolt (3/4") 4 1D-4610
Washer 4 5P-8248
1 Optional (DF) roller for guiding. Use quantity required for specific roller frame type.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

519
 Track-Type Loaders
963D, 963C, 963B, 963

963C, 963B TRACK ROLLERS

CURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)
2DS, 9BL, BBD

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 6 231-3088 1
Single Flange (SF) 6 231-3087 2
Tall Flange Double (TFD) -3 231-3089 4
Components of Group
Roller Shell (DF) 1 120-5767 1
Roller Shell (SF) 1 120-5753 2
Roller Shell (TFD) 1 120-5804 4
Bushing Assembly 2 116-6698
Bushing Assembly - Bearing 5 1 8P-5197
Shaft 1 116-6702 6
Collar 2 120-5785
Retaining Ring 2 117-9748
Ring (Lock) 2 5M-4443
Seal - Duo-Cone Group 2 171-5882
Toric Ring 5 2 162-2166
Seal - Bushing O-Ring 2 2H-3928
Seal - Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 7
Bolt (3/4") 8 4 1D-4608
Bolt (20 mm) 8 4 6V-5845
Washer (3/4") 4 5H-1504
Washer (20 mm) 4 8T-3282
1 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer
8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
2 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer
8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
3 Optional DF roller for guiding; use quantity required for specific roller frame type.
4 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0936, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer
8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0936, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
5 Components of proceeding assembly or group; quantity shown is quantity per assembly or group.
6 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap
317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller
Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
7 These components are not included in the roller group; quantities shown are required to mount each roller.
8 963 machine effectivity for 20 mm metric mounting bolts (21Z3442 -- UP, 9BL1-- UP). All other 963 serial numbers (06Z, 11Z, 18Z, 48Z, and 29S)
required 3/4" English mounting bolts.

520
 Track-Type Loaders
963D, 963C, 963B, 963

963B, 963 TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)
18Z1352-UP excluding 1354, 1359, 1363; 21Z319-UP; 9BL

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 6 --
Single Flange (SF) 6 --
Components of Group
Roller Shell (DF) 1 7T-4106 1
Roller Shell (SF) 1 7T-4101 2
3
Bearing 2 9P-2245
Shaft 1 6T-0720 4
Retainer Assembly 2 7T-4152
Thrust Washer 5 1 9W-2423
Dowel 5 4 2H-1190
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4031
Seal -- Duo-Cone Group 2 7T-0158
3
Toric Ring 1 6P-8912
3
O-Ring 1 6V-2701
Seal -- Retainer 2 5F-3144
Stopper 1 7G-4332
Plug 1 6Y-0473
6
Mounting Hardware
End Cap 2 6T-4861
Bolt 7 4 1D-4610
Washer 7 4 5P-8248
8
Bolt 4 8T-0360
Washer 8 4 8T-3282
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4722
3
Toric Ring 1 7T-1094
3
O-Ring 1 8T-2272
Seal -- Retainer 2 4S-5898
1 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 214-1109, 4 - Bolt 8T-0360, 4 - Washer
8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
2 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 214-1109, 4 - Bolt 8T-0360, 4 - Washer
8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap
214-1109, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller
Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
5 These components used to repair retainer assembly. See instruction SEHS8915.
6 These components are not included in the roller group; quantities shown are required to mount each roller.
7 Inch hardware 3/4 inch -- serial number 21Z-0319 -- 3441.
8 Metric hardware 20mm -- serial number 21Z- 3442 -- UP.

521
 Track-Type Loaders
963D, 963C, 963B, 963

963 TRACK ROLLERS

EARLY DESIGN
11Z, 18Z1-1352, 21Z1-318, 29S, 48Z, 6Z

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 6 118-1618 1
Single Flange (SF) 6 118-1617 2
Components of Group
Roller Shell (DF) 1 9G-8032 1
Roller Shell (SF) 1 9G-8027 2
Bushing Assembly 2 2P-8048
3
Bearing 1 8P-6651
Shaft 1 116-6702 4
End Collar 2 7G-0418 5
Bolt 12 2P-3201
Ring (Lock) 2 5M-4443
Seal -- Duo-Cone Group 2 6Y-0925
3
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 2H-3928
Seal -- Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
6
Mounting Hardware
Bolt 4 1D-4608
Washer 4 5H-1504
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
3
Toric Ring 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 8S-5654
Seal - Shaft O-Ring (Steel Mill) 2 8M-4436
1 For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
2 For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer
5P-8248.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF)
288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
5 If 7G-0419 shaft is used, use (1) 7G-0418 and (1) 7G-0417 end collar.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

963D END GUIDING GUARDS (FRONT)

USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 253-0548
Left Outer, Right Inner 2 253-0548

522
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B END GUIDING GUARDS (FRONT)

LUBRICATED SWING LINK, METRIC HARDWARE
SystemOne, Hybrid, Sealed and Libricated Track

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 8Y-6672
Left Outer, Right Inner 2 8Y-6671
Wear Strip 4 231-4011
Bolt 4 7X-2553
Bolt 8 8T-4779
Washer 12 8T-4122
Bearing (Per Guard Assembly) 2 3W-8398

963C/B END GUIDING GUARDS (FRONT)

USE WITH ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 191-4800
Left Outer, Right Inner 2 191-4799
Wear Strip 4 192-2548
Bolt 8 7X-2554
Bolt 8 8T-4779
Washer 16 8T-4122
Bearing (Per Guard Assembly) 2 3W-8398

963 END GUIDING GUARDS

LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 3W-8399
Left Outer, Right Inner 2 3W-8396
Wear Strip 4 7P-6570
Bolt 12 0S-1589

523
Track-Type Loaders
963D, 963C, 963B, 963

963 END GUIDING GUARDS

EARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 7P-6594
Left Outer, Right Inner 2 7P-6595
Wear Strip 4 7P-6570
Bolt 12 0S-1589
Rear (Guard Assembly)
Right Outer, Left Inner 2 3W-7778
Left Outer, Right Inner 2 3W-7779
Wear Strip 4 8G-7575
Bolt 16 0S-1566
Washer 16 5P-8247

963D END GUIDING GUARDS (REAR SPROCKET)

USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 253-0544
Rear Guard -- Left Outer, Right Inner 2 253-0543
Bolt (M20) (Rear Guard to Frame) 12 8C-8478
Bolt (M20) (Rear Guard to Frame) 4 7X-2563
Washer 16 8T-4123
Tube 2 7P-4695
Rod 2 3W-8134
Nut 4 8T-4132
Washer 4 8T-4122
Guard Assembly (Outer Right) 1 254-5240
Guard Assembly (Outer Left) 1 254-5241
Guard Assembly (Inner Right) 1 254-5242
Guard Assembly (Inner Left) 1 254-5243
Plate (Inner Right) 1 139-9015
Plate (Inner Left) 1 139-9016
Bolt (M12) (Guard As. & Plate to Frame) 24 8T-4192
Washer 24 8T-4223
Bolt (M16) (Guard As. to Rear Guard) 8 8T-4193
Washer 8 7X-0515

524
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B END GUIDING GUARDS (REAR SPROCKET)

SystemOne, Hybrid, Sealed and Libricated Track

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 8Y-6629
Rear Guard -- Left Outer, Right Inner 2 8Y-6630
Bolt (Rear Guard Mtg.) 4 8T-6381
Bolt (Rear Guard Mtg.) 8 8C-8478
Washer 12 8T-4123
Tube 2 7P-4695
Rod 2 3W-8134
Nut 4 8T-4132
Washer 4 8T-4122
Wear Strip 4 231-4010
Bolt 16 8T-4779
Bolt 4 7X-2553
Washer 16 8T-4122
Guard Assembly (Outer Left) 1 3W-8123
Guard Assembly (Outer Right) 1 3W-8120
Guard Assembly (Inner Left) 1 139-9020
Plate (Inner Left) 1 139-9016
Guard Assembly (Inner Right) 1 139-9019
Plate (Inner Right) 1 139-9015
Bolt 24 8T-4192
Washer 24 8T-4223
Bolt (Large) 4 7X-2563
Bolt (Small) 4 8T-4175
Washer (Small) 4 7X-0515
Washer (Large) 4 8T-5439

525
Track-Type Loaders
963D, 963C, 963B, 963

963C/B END GUIDING GUARDS (REAR SPROCKET)

USE WITH ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 191-2024
Rear Guard -- Left Outer, Right Inner 2 191-2025
Bolt (Rear Guard Mtg.) 4 8T-6381
Bolt (Rear Guard Mtg.) 8 8C-8478
Bolt 4 7X-2563
Washer 16 8T-4123
Tube 2 7P-4695
Rod 2 3W-8134
Nut 4 8T-4132
Washer 4 8T-4122
Wear Strip 4 192-2547
Bolt 16 8T-4779
Washer 16 8T-4122
Guard Assembly (Outer Left) 1 195-7707
Guard Assembly (Outer Right) 1 195-7711
Guard Assembly (Inner Left) 1 195-7702
Plate (Inner Left) 1 139-9016
Guard Assembly (Inner Right) 1 195-7701
Plate (Inner Right) 1 139-9015
Bolt 24 8T-4192
Washer 24 8T-4223
Bolt 8 8T-4141
Washer 8 8T-4123

963D TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly
Right Outer, Left Inner 2 253-3667
Left Outer, Right Inner 2 253-3668
Bolt (M20) 24 7X-2563
Washer 24 8T-4123
Spacer 24 8Y-1779
Tube 12 7P-4695
Rod 12 8Y-1944
Nut 24 8T-4132
Washer 24 8T-4122
Plate (Front) 4 3W-8495
Plate (Rear) 4 8Y-6625
Bolt (M16) 24 7X-2553
Washer 24 8T-4122

526
 Track-Type Loaders
963D, 963C, 963B, 963

963C/B TRACK ROLLER GUARDS (FULL LENGTH)

METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly
Right Outer, Left Inner 2 3W-8489
Left Outer, Right Inner 2 3W-8492
Bolt 24 7X-2563
Washer 24 8T-4123
Spacer 24 8Y-1779
Tube 10 7P-4695
Rod 10 8Y-1944
Nut 20 8T-4132
Washer 20 8T-4122
Plate (Front) 4 3W-8495
Plate (Rear) 4 8Y-6625
Bolt 12 7X-2553
Bolt 12 8T-4193
Washer 24 8T-4122
Plate (Front Guide) 4 3W-8140

963 TRACK ROLLER GUARDS (FULL LENGTH)

INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly
Right Outer, Left Inner 2 7P-7430
Left Outer, Right Inner 2 7P-7431
Bolt 20 8T-8924
Washer 20 8T-4994
Spacer 20 1K-3478
Tube 10 7P-4695
Rod 10 7P-4699
Nut 20 7X-0448
Washer 20 8T-4122
Plate (Front) 2 8G-7150
Plate (Front) 2 8G-7149
Plate (Rear) 4 8G-7576
Bolt 8 7X-0343
Bolt 8 7X-0347
Bolt 4 7X-0344
Bolt 4 7X-0346
Washer 24 8T-4122
Plate (Front Guide) 4 8G-7148

527
Track-Type Loaders
963D, 963C, 963B, 963

963D IDLER GUARDS

CONVENTIONAL IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 8Y-1900
Bolt (M12) 4 8T-4176
Bolt (M12) 4 8T-4194
Washer 8 5P-1076
Guard Assembly 2 3W-8772
Guard Assembly 2 3W-8775
Bar 2 8Y-1778
Bolt (M12) 4 8T-4956
Bolt (M12) 16 8T-4192
Washer 20 5P-1076

528
 Track-Type Loaders
973C, 973

973C, 973 TRACK

HYBRID TRACK LARGE O.D. BUSHING
26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L, BCP, LDX
8.50" (215.9 mm) PITCH -- 7/8" BOLT

SALT PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 291-1612
Track Links
RH Pin End Master 1 255-4791
LH Pin End Master 1 255-4792
RH Bushing End Master 1 255-4793
LH Bushing End Master 1 255-4794
RH Regular 39 289-8083
LH Regular 39 289-8084
Other Components
Pin 40 199-2794
Bushing 40 237-3790
Seal Assembly (Rigid) 80 251-1659
Thrust Ring 80 152-8073
Stopper 40 7G-4332
Plug 40 6Y-0473
1
Track Hardware
Bolt 156 7H-3599
Nut 156 7T-9825
Master Bolt 4 9W-9058
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 261-2353
Seal Set (86 Seal Assemblies) 1 251-1660
1 Not part of link assembly; required to assemble track group.

973C, 973 MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBER

Link Asssembly Used 236-8177
Double Grouser Shoe -- 19.7" (500 mm) 2 236-8178

529
 Track-Type Loaders
973C, 973

973C, 973 TRACK

LARGE O.D. BUSHING
26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L
8.50" (215.9 mm) PITCH -- 7/8" BOLT

SALT PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 6Y-2592 1
Track Links
RH Pin End Master 1 9W-9059
LH Pin End Master 1 9W-9060
RH Bushing End Master 1 9W-9061
LH Bushing End Master 1 9W-9062
RH Regular 39 6Y-2593
LH Regular 39 6Y-2594
Other Components
Pin 40 3P-0622
Bushing 40 8E-5258 2
Seal Assembly (Rigid) 80 250-3998
Thrust Ring 80 3P-0623
Stopper 40 7G-4332
Plug 40 6Y-0473
3
Track Hardware
Bolt 156 7H-3599
Nut 156 7T-9825
Master Bolt 4 9W-9058
Special Sets/Groups
Bushing and Seal Group (38 Sections) 1 6I-8060
Seal Set (84 Seal Assemblies) 1 252-7858
1 Service replaced by (1) 236-8177 Hybrid link assembly, and (5) 197-9679 Tough Steel Segments
2 If small O.D. bushing required, use part number 3P-0621.
3 Not part of link assembly; required to assemble track group.

530
 Track-Type Loaders
973C, 973

973 TRACK
HYBRID LARGE O.D. BUSHING
26Z, 32Z, 66G, 86G, 90L, 91L
8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

SALT PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 236-8179 1
Track Links
RH Pin End Master 1 255-4791
LH Pin End Master 1 255-4792
RH Bushing End Master 1 255-4793
LH Bushing End Master 1 255-4794
RH Regular 39 233-0385
LH Regular 39 233-0386
Other Components
Pin 40 199-2794
Bushing 40 237-3790
Seal Assembly (Rigid) 80 251-1659
Thrust Ring 80 152-8073
Stopper 40 7G-4332
Plug 40 6Y-0473
2
Track Hardware
Bolt (3/4") 156 7H-3598
Nut 156 1S-1860
Master Bolt (7/8") 4 9W-9058
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 261-2353
Seal Set (86 Seal Assemblies) 1 251-1660
1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.
2 Not part of link assembly; required to assemble track group.

531
 Track-Type Loaders
973C, 973

973 TRACK
LARGE O.D. BUSHING
26Z, 32Z, 66G, 86G, 90L, 91L
8.50" (215.9 mm) PITCH -- 3/4" BOLT

SALT PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 -1
Track Links
RH Pin End Master 1 7T-4659
LH Pin End Master 1 7T-4660
RH Bushing End Master 1 7T-4661
LH Bushing End Master 1 7T-4662
RH Regular 39 7T-4657
LH Regular 39 7T-4658
Other Components
Pin 40 3P-0622
Bushing 40 8E-5258 2
Seal Assembly (Rigid) 80 250-3998
Thrust Ring 80 3P-0623
Stopper 40 7G-4332
Plug 40 6Y-0473
3
Track Hardware
Bolt 156 7H-3598
Nut 156 1S-1860
Master Bolt 4 2P-9670
Special Sets/Groups
Bushing and Seal Group (38 Sections) 1 6I-8060
Seal Set (84 Seal Assemblies) 1 252-7858
1 Canceled replaced by (1) 236-8179 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for
master shoe rework.
2 If small O.D. bushing required, use part number 3P-0621.
3 Not part of link assembly; required to assemble track group.

532
 Track-Type Loaders
973C, 973

973C ROTATING BUSHING TRACK

8.50" (215.9 mm) PITCH - 7/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 40 Section 2 152-8054
Track Links
RH Pin End Master 1 6I-9241
LH Pin End Master 1 6I-9242
1
RH Bushing End Master 1 165-1760
LH Bushing End Master 1 1 165-1761
1
RH Regular 39 165-1758
LH Regular 1 39 165-1759
Other Components
Pin 40 152-8080
Bushing 40 165-1770
Seal Assembly (Rigid) 160 222-6998
Thrust Ring 160 152-8073
Stopper 40 7G-4332
Plug 40 6Y-0473
2
Track Hardware
Bolt 156 7H-3599
Nut 156 2S-2140
Master Bolt 2 6V-1723
Master Bolt 2 9W-9058
1 Joint Assemblies ( include link and insert). Insert not serviced
2 Not part of link assembly; required to assemble track group.

533
 Track-Type Loaders
973C, 973

973C, 973 TRACK

HYBRID STEEL MILL
8.50" (215.9 mm) PITCH - 7/8" BOLT

SEALED PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 261-1614 1
Track Links
RH Regular 40 289-3083
LH Regular 40 289-3084
Other Components
Pin 39 8E-4272
Master Pin 1 8E-4273
Bushing 39 247-1475
Master Bushing 1 247-1476
Seal (Spring Washer) 160 8M-6239
Spacer 2 8M-6238
2
Track Hardware
Bolt 160 7H-3599
Nut 160 7T-9825
1 To be used with (5) 197-9679 sprocket segments.
2 Not part of link assembly; required to assemble track group

973C, 973 TRACK

STEEL MILL
8.50" (215.9 mm) PITCH -- 7/8" BOLT

SEALED PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 6Y-5905 1
Track Links
RH Regular 40 6Y-2593
LH Regular 40 6Y-2594
Other Components
Pin 39 8E-4272
Master Pin 1 8E-4273
Bushing 39 1M-3669
Master Bushing 1 1M-3670
Seal (Spring Washer) 160 8M-6239
Spacer 2 8M-6238
2
Track Hardware
Bolt 160 7H-3599
Nut 160 7T-9825
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4236
1 Serviced replaced by (1) 246-5809 link assembly and (5) 197-9679 sprocket segments.
2 Not part of link assembly; required to assemble track group

534
 Track-Type Loaders
973C, 973

973C, 973 TRACK

STEEL MILL
8.50" (215.9 mm) PITCH -- 3/4" BOLT

SEALED PART
QUANTITY NUMBER
Link Assembly -- 40 Section 2 -- 1
Track Links
RH Regular 40 8S-2589
LH Regular 40 8S-2590
Other Components
Pin 40 8E-4272
Bushing 40 1M-3669
Seal (Spring Washer) 160 8M-6239
Spacer 2 8M-6238
2
Track Hardware
Bolt 160 7H-3598
Nut 160 1S-1860
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4236
1 Order 38 Section 246-5808 Link assembly, remove split masters and add 3 sections.
2 Not part of link assembly; required to assemble track group

973C, 973 TRACK SHOES

8.50" (215.9 mm) PITCH -- 7/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Extreme Service 20.0" (510 mm) 1Q-4918 1Q-4919
Single Grouser - Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4689 1Q-4690
Single Grouser - Extreme Service 22.0" (560 mm) 1Q-4955 1Q-4956
Single Grouser - Extreme Service (LGP) 26.5" (675 mm) 1Q-4658 1Q-4659
Single Grouser - Extreme Service (LGP) (Trapezoidal Opening) 26.5" (675 mm) 125-9087 125-9088
Single Grouser - Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4965 1Q-4964
Double Grouser 19.7" (500 mm) 8E-4416 8E-4417
Double Grouser (Trapezoidal Opening) 19.7" (500 mm) 128-7743 128-7744
Double Grouser (LGP) 24.0" (610 mm) 8E-4427 1Q-4669
Double Grouser (LGP) 26.5" (675 mm) 8E-4418 8E-4419
Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8323 8E-8324
Flat 19.7" (500 mm) 6Y-5906 --
Triple Grouser 19.7" (500 mm) 1Q-4604 8E-4417 1
1 Double Grouser Shoe

535
 Track-Type Loaders
973C, 973

973C, 973 TRACK SHOES

ROTATING BUSHING TRACK
8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 9Z-9261
Extreme Service 24.0" (610 mm) 7T-5969
Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 9Z-9263
Double Grouser 20.0" (510mm) 170-3823
Double Grouser 27.0" (675mm) 170-3827

973 HYBRID TRACK SHOES

USE WITH TRACK LINKS 233-0385, 233-0386
8.50" (215.9 mm) PITCH 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Extreme Service 20.0" (510 mm) 5S-6909 1Q-4919
Single Grouser - Moderate Service (Trapeziodal Opening) 20.0" (510 mm) 1Q-4965 1Q-4964
Double Grouser 18.0" (460 mm) 8E-4434 263-9760
Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761
Double Grouser (LGP, Trapezoidal Opening) 22.0" (560 mm) 8E-4432 263-9759
Chopper (Trapezoidal Opening) 19.7" (500 mm) 8E-8325 8E-8324

973 TRACK SHOES

8.50" (215.9 mm) PITCH -- 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Extreme Service 20.0" (510 mm) 5S-6909 3P-0619
Single Grouser - Moderate Service 18.0" (460 mm) 6P-3068 6P-3069
Single Grouser - Moderate Service 20.0" (510 mm) 1P-9807 3P-0615
Double Grouser 18.0" (460 mm) 8E-4434 8E-4435
Double Grouser (Trapezoidal Opening) 1 18.0" (460 mm) 8E-4436 8E-4437
2
Double Grouser (LGP, Trapezoidal Opening) 22.0" (560 mm) 8E-4432 8E-4433
Chopper (Trapezoidal Opening) 19.7" (500 mm) 8E-8325 8E-8326
Steel Mill Flat 19.7" (500 mm) 6T-0729 --
1 Replaces former 20" (510 mm) 3P-7384/68 shoes; refer to IRM UC93-14 for details.
2 Replaces former 27" (685 mm) 7P-4009/3908 shoes; refer to IRM UC93-14 for details.

536
 Track-Type Loaders
973C, 973

973C, 973 SPROCKETS

8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (5 Tooth) (Tough Steel) 5 197-9679
Bolt 20 282-3655
Nut 20 7H-3608

973C, 973 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 7T-4509
Other Components
Bushing Assembly 2 3P-8432
1
Bearing 1 8P-6651
Shaft 1 8E-9562
Seal -- Duo-Cone Group 2 9W-1060
1
Toric Ring 1 8H-2262
O-Ring 1 1 9W-1058
Seal -- Bushing O-Ring 2 4H-9105
Bolt 12 9B-7237
Washer 12 8T-4896
Stopper 1 7G-4332
Plug 1 6Y-0473
Lock 2 5M-5000
Bolt 2 7X-0310
Washer 2 7X-0563
Swing Link 1 8Y-5859
Swing Link 1 8Y-5861
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 9W-1059
Toric Ring 1 1 9M-9730
1
O-Ring 1 9W-1057
Seal -- Bushing O-Ring 2 9M-9729
Stopper 1 3T-3800
Plug 1 3T-3799
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

537
 Track-Type Loaders
973C, 973

973C, 973 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 1P-8717
Components of Group
Roller Shell 1 1P-8716
Shaft 1 1P-8715
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Groups
Group (Steel Mill) 4 2P-3514
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8994
Toric Ring 1 1 9M-9730
Seal--Cover (Steel Mill) 1 2P-3538
Seal--Shaft (Steel Mill) 1 1S-2174
Group (Arctic) 4 255-8882
Seal -- Duo-Cone Group (Arctic) 1 171-5882
Toric Ring 2 162-2166
1 Component of preceding group; quantity shown is the quantity per group.

538
 Track-Type Loaders
973C, 973

973C, 973 TRACK ROLLERS

CURRENT METRIC MOUNTING HARDWARE, END COLLARS
3RZ, 86G1087-UP

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 238-7860
Single Flange (SF) 6 238-7861
Components of Group
Roller Shell (DF) 1 124-8255
Roller Shell (SF) 1 124-8251
Bushing Assembly 2 124-8267
1
Bearing 1 8P-6651
Shaft 1 118-1628
Ring (Retaining-Snap) 2 121-1258
Ring (Lock) 2 6H-2953
End Collar 2 134-6638
Seal -- Duo-Cone Group 2 171-5882
1
Toric Ring 2 162-2166
Seal - Bushing O-Ring 2 4H-9105
Seal - Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
2
Mounting Hardware
Bolt (24 mm) 4 6V-8133
Washer (24 mm) 4 6V-8237
Special Application Roller Groups
Double Flange (DF) (Steel Mill) 8 129-5030
Single Flange (SF) (Steel Mill) 6 129-5029
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 1 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390
Stopper (Steel Mill) 1 3T-3800
Plug (Steel Mill) 1 3T-3799
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

539
 Track-Type Loaders
973C, 973

973 TRACK ROLLERS

FORMER INCH MOUNTING HARDWARE, END COLLARS
26Z, 32Z, 66G, 86G1-1086, 90L, 91L

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 231-3091
Single Flange (SF) 6 231-3090
1
Tall Flange Double (TFD) - 231-3092
Components of Group
Roller Shell (DF) 1 124-8255
Roller Shell (SF) 1 124-8251
Roller Shell (TFD) 1 124-8259
Bushing Assembly 2 124-8267
Bearing 2 1 8P-6651
Shaft 1 118-1628
Ring (Retaining-Snap) 2 121-1258
Ring (Lock) 2 6H-2953
End Collar 2 124-8262
Seal -- Duo-Cone Group 2 171-5882
2
Toric Ring 2 161-2166
Seal - Bushing O-Ring 2 4H-9105
Seal - Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 3
Bolt (7/8") 4 1D-4629
Washer (7/8") 4 9H-1031
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 2 2 9M-9730
Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390
Stopper (Steel Mill) 1 3T-3800
Plug (Steel Mill) 1 3T-3799
1 Optional DF roller for guiding; use quantity required for specific roller frame type.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

540
 Track-Type Loaders
973C, 973

973 TRACK ROLLERS

FORMER BOLT-ON RETAINER
90L, 91L, 86G223-UP, 66G788-UP, (Inc. 66G786)

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 -- 1
Single Flange (SF) 6 -- 2
Components of Group
Roller Shell (DF) 1 9W-5581
Roller Shell (SF) 1 9W-5582
Bearing 3 2 9W-9498
Shaft 1 3T-7392
Retainer 2 9W-6632
Thrust Washer 4 1 8E-7510
Stabilizer Ring 2 6T-4871
Bolt 12 0S-1595
Washer 12 5P-8245
Seal -- Duo-Cone Group 2 7T-0158
Toric Ring 3 1 6P-8912
O-Ring 3 1 6V-2701
Seal -- Retainer 2 5F-3106
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
End Cap (7/8") 2 6T-5114
Bolt (7/8") 4 2H-3856
Washer (7/8") 4 4M-6953
End Cap (24 mm) 2 6Y-6116
Bolt (24 mm) 4 8T-0667
Washer (24 mm) 4 6V-8237
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4722
3
Toric Ring 1 7T-1094
3
O-Ring 1 8T-2272
Retainer 2 4S-5898
Stopper 1 3T-3800
Plug 1 3T-3799
1 Upgrade to 124-8253.
2 Upgrade to 124-8250.
3 Component of preceding assembly or group; quantity shown is per assembly or group.
4 Use (1) 9G-9341 Thrust Washer and (4) 2H-1190 Dowels to repair former 9W-6633 Retainer Assembly. Do not drill and dowel new 8E-7510
Thrust Washer. See Special Instruction SEHS8515.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

541
 Track-Type Loaders
973C, 973

973 TRACK ROLLERS

EARLY INCH MOUNTING HARDWARE
26Z, 32Z, 86G1-222, 66G1-787 (Exc. 66G786)

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 118-1625
Single Flange (SF) 6 118-1623
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
Bushing Assembly 2 1P-8787
1
Bearing 1 8P-6651
Shaft 1 118-1628 2
End Collar 2 9S-0312 3
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
4
Mounting Hardware
Bolt 4 1D-4629
Washer 4 9H-1031
Special Application Roller Groups
Double Flange (DF) (Steel Mill) 8 118-1631
Single Flange (SF) (Steel Mill) 6 118-1630
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 1 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
Stopper (Steel Mill) 1 3T-3800
Plug (Steel Mill) 1 3T-3799
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Replaces former 9S-0313 shaft; requires 2 -- 9S-0312 end collars.
3 If 9S-0313 shaft is used, use 1 -- 9S-0312 and 1 -- 9S-0311 end collar.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

542
 Track-Type Loaders
973C, 973

973C, 973 END GUIDING GUARDS

CURRENT MODEL, LUBRICATED SWING LINK, METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 249-5500
Left Outer, Right Inner 2 249-5501
Wear Strip 4 8Y-1732
Bolt 16 7X-2562
Washer 16 8T-4123
Bearing (Per Guard Assembly) 2 3W-8240

973C, 973 TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 8Y-6627
Rear Guard -- Left Outer, Right Inner 2 8Y-6628
Bolt 16 8T-4649
Washer 16 8T-4167
Spacer 2 7P-5952
Rod 2 3W-8344
Nut 4 8T-4131
Washer 4 8T-4123
Plate (Wear) 4 3W-8339
Bolt 16 8T-5460
Washer 16 8T-4123
Guard Assembly (RH Outer) 1 8Y-1728
Guard Assembly (RH Inner) 1 8Y-1730
Guard Assembly (LH Outer) 1 8Y-1729
Guard Assembly (LH Inner) 1 8Y-1731
Bolt 24 8T-4956
Washer 24 5P-1076
Bolt 4 7X-2562
Bolt 4 7X-2564
Washer 8 8T-4123

543
Track-Type Loaders
973C, 973

973C/B END GUIDING GUARDS

USE WITH ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 249-5507
Left Outer, Right Inner 2 249-5509
Wear Strip 4 192-2550
Bolt 8 7X-2562
Bolt 8 8T-5460
Washer 16 8T-4123
Bearing (Per Guard Assembly) 2 3W-8240

973C/B TRACK GUIDING GUARDS (REAR SPROCKET)

USE WITH ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBER

Rear Guard -- Right Outer, Left Inner 2 191-2028
Rear Guard -- Left Outer, Right Inner 2 191-2029
Bolt 16 8T-4649
Washer 20 8T-4167
Spacer 2 198-9059
Rod 2 3W-8344
Nut 4 8T-4131
Washer 36 8T-4123
Plate (Wear) 4 192-2549
Bolt 8 8T-5460
Guard Assembly (RH Outer) 1 218-0051
Guard Assembly (RH Inner) 1 218-0049
Guard Assembly (LH Outer) 1 218-0050
Guard Assembly (LH Inner) 1 218-0048
Bolt 24 8T-4956
Washer 24 5P-1076
Bolt 4 7X-2576
Bolt 16 8T-4141

544
 Track-Type Loaders
973C, 973

973 END GUIDING GUARDS (FRONT)

FORMER MODEL, LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 3W-8236
Left Outer, Right Inner 2 3W-8244
Wear Strip 4 8G-3351
Bolt 12 7X-0380
Bearing 4 3W-8240

973 END GUIDING GUARDS (REAR)

FORMER MODEL, NARROW MOUNTING BOLT PATTERN, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Rear (Guard Assembly)
Right Outer 1 3W-7675
Left Outer 1 3W-7684
Right Inner 1 3W-7691
Left Inner 1 3W-7687
Bolt 2 7X-0368
Washer 2 8T-4994
Bolt 16 7X-0385
Washer 16 8C-6913
Wear Strip 4 8G-8031
Bolt 20 8T-9398
Washer 20 8T-4994

973 END GUIDING GUARDS (FRONT)

EARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Front (Guard Assembly)
Right Outer, Left Inner 2 7P-9246
Left Outer, Right Inner 2 7P-9250
Wear Strip 4 8G-6048
Bolt 12 2H-3757
Bearing 4 8G-0980

545
Track-Type Loaders
973C, 973

973 END GUIDING GUARDS (REAR)

EARLY MODEL, INCH HARDWARE (1ST PROD 1985)

(PER MACHINE) QUANTITY PART NUMBER

Rear (Guard Assembly)
Right Outer 1 3W-7774
Left Outer 1 3W-7772
Right Inner 1 3W-7773
Left Inner 1 3W-7771
Bolt 4 1D-4609
Washer 4 5P-8248
Bolt 16 1D-4628
Washer 16 5P-8249
Wear Strip 4 8G-8031
Bolt 20 1A-0458
Washer 20 5P-8248

973C, 973 TRACK ROLLER GUARDS

CURRENT MODEL, METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 3W-8546
Guard Assembly 2 3W-8549
Spacer 12 7P-5952
Rod 12 8Y-1775
Washer 24 8T-4123
Nut 24 8T-4131
Bolt 24 8T-5878
Washer 24 8T-4167
Boss 24 1K-7183
Plate (Rear) 4 8Y-6625
Plate (Front) 2 8Y-1773
Plate (Front) 2 8Y-1774
Bolt 4 8T-5460
Bolt 8 8T-6430
Bolt 12 7X-2563
Plate (Guide) 4 8Y-1772
Bolt 8 8T-6430
Washer 32 8T-4123

546
 Track-Type Loaders
973C, 973

973 TRACK ROLLER GUARDS

FORMER MODEL, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 7P-5943
Guard Assembly 2 7P-5948
Spacer 12 7P-5952
Rod 12 8G-2049
Washer 24 8T-4994
Nut 24 6V-8182
Bolt 32 7X-0384
Washer 32 8C-6913
Boss 32 1K-7183
Plate (Rear) 2 8G-8047
Plate (Rear) 2 8G-8050
Plate (Front) 2 8G-6045
Plate (Front) 2 8G-6044
Bolt 8 8T-9399
Bolt 8 7X-0380
Bolt 8 7X-0382
Plate (Guide) 4 8G-6048
Washer 24 8C-6913

547
 Track-Type Loaders
977

977 SEALED AND LUBRICATED HYBRID TRACK

11K5959-UP, 14X, 48J1281-UP, 70J2772-UP
8.50" (215.9 mm) PITCH -- 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 239-6881 1
Track Links
RH Pin End Master 1 255-4791
LH Pin End Master 1 255-4792
RH Bushing End Master 1 255-4793
LH Bushing End Master 1 255-4794
RH Regular 38 233-0385
LH Regular 38 233-0386
Other Components
Pin 39 199-2794
Bushing 39 237-3790
Seal Assembly (Rigid) 78 251-1659
Thrust Ring 78 152-8073
Stopper 39 7G-4332
Plug 39 6Y-0473
2
Track Hardware
Bolt (3/4") 152 7H-3598
Nut 152 1S-1860
Master Bolt (7/8") 4 9W-9058
Special Sets/Groups
Bushing and Seal Group (40 Sections) 1 261-2353
Seal Set (86 Seal Assemblies) 1 251-1660
1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.
2 Not part of link assembly; required to assemble track group.

548
 Track-Type Loaders
977

977 SEALED AND LUBRICATED TRACK

11K5959-UP, 14X, 48J1281-UP, 70J2772-UP
8.50" (215.9 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 3P-0628 1
Track Links
RH Pin End Master 1 2P-9653
LH Pin End Master 1 2P-9654
RH Bushing End Master 1 2P-9655
LH Bushing End Master 1 2P-9656
RH Regular 38 8S-2589
LH Regular 38 8S-2590
Other Components
Pin 39 3P-0622
Bushing 39 3P-0621
Seal Assembly (Rigid) 78 250-3998
Thrust Ring 78 3P-0623
Stopper 39 7G-4332
Plug 39 6Y-0473
2
Track Hardware
Bolt 152 7H-3598
Nut 152 1S-1860
Master Bolt 4 2P-9670
Special Sets/Groups
Bushing and Seal Group (38 Sections) 1 6I-8060 3
Seal Set (84 Seal Assemblies) 1 252-7858
1 Serviced replaced by (1) 239-6881 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master
shoe rework.
2 Not part of link assembly; required to assemble track group.
3 Contains Extended Wear Life Bushings (8E-5258).

549
 Track-Type Loaders
977

977 SEALED TRACK

11K5959-UP, 14X, 48J1281-UP, 70J2772-UP
8.50" (215.9 mm) PITCH -- 3/4" BOLT

(PER MACHINE) QUANTITY PART NUMBER

1
Link Assembly -- 39 Section 2 -2
Track Links
RH Pin End Master 1 2P-9653
LH Pin End Master 1 2P-9654
RH Bushing End Master 1 2P-9655
LH Bushing End Master 1 2P-9656
RH Regular 38 8S-2589
LH Regular 38 8S-2590
Other Components
Pin 39 8E-4272
Bushing 39 1M-3669
Seal (Sealed) 156 8M-6239
3
Track Hardware
Bolt 152 7H-3598
Nut 152 1S-1860
Master Bolt 4 2P-9670
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4236
1 Steel Mill Applications
2 Order 38 Section 246-5808 and add 1 section.
3 Not part of link assembly; required to assemble track group.

550
 Track-Type Loaders
977

977 EXTENDED WEAR LIFE TRACK 1

LARGE O.D. BUSHING
8.50" (215.9 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 39 Section 2 -- 2
Track Links
RH Pin End Master 1 7T-4659
LH Pin End Master 1 7T-4660
RH Bushing End Master 1 7T-4661
LH Bushing End Master 1 7T-4662
RH Regular 38 7T-4657
LH Regular 38 7T-4658
Other Components
Pin 39 3P-0622
Bushing 39 8E-5258 3
Seal Assembly (Rigid) 78 250-3998
Thrust Ring 78 3P-0623
Stopper 39 7G-4332
Plug 39 6Y-0473
4
Track Hardware
Bolt 152 7H-3598
Nut 152 1S-1860
Master Bolt 4 2P-9670
Special Sets/Groups
Bushing and Seal Group (38 Sections) 1 6I-8060
Seal Set (84 Seal Assemblies) 1 252-7858
1 NOTE: Extended wear life link assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections for details.
2 Order 38 Section 239-6882 and add 1 section.
3 If small O.D. Bushing required, use part number 3P-0621.
4 Not part of the link assembly; required to assemble track group.

551
 Track-Type Loaders
977

977 SEALED ONE PIECE MASTER LINK

20A2509-UP, 53A, 46H, 48J1-1280, 70J1-2771, 11K1-5958
8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 41 Section 2 1S-6943 1
Track Links
RH Regular 41 1S-1863
LH Regular 41 1S-1864
Other Components
Pin 40 6B-5882
Master Pin 1 8M-7288
Bushing 40 8M-7289
Master Bushing 1 5M-2033
Seal (Spring Washer) 164 8M-7231
Spacer 2 8M-7290
2
Track Hardware
Bolt 164 1S-1859
Nut 164 1S-1860
Special Groups
Pin and Bushing Group (36 Sections) 1 8P-5689
1 If 40 section link assembly is required order 1S-6943 and remove one section.
2 Not part of link assembly; required to assemble track group

552
 Track-Type Loaders
977

977 SEALED AND LUBRICATED TRACK

20A1-2508
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 44 sections 2 -- 1
Track Links
RH Pin End Master 1 3P-3043
LH Pin End Master 1 3P-3044
RH Bushing End Master 1 3P-3045
LH Bushing End Master 1 3P-3046
RH Regular 43 3P-7153
LH Regular 43 3P-7154
Other Components
Pin 44 160-7818 2
Bushing 44 7T-4636 3
Seal Assembly (Rigid) 88 250-3990
Thrust Ring 88 3P-3878
Stopper 44 5G-2247
Plug 44 6Y-0473
4
Track Hardware
Bolt 172 7H-3597
Nut 172 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Bushing and Seal Group (46 Sections) 1 154-3659
Seal Set (92 Seal Assemblies) 1 252-7859
1 Order 154-3676 link assembly and remove two sections.
2 Former pin 3P-3880, replaced by, 1-160-7818 pin, 1-5G-2247 stopper, 1-6Y-0473 plug.
3 Large O.D. bushings.
4 Not part of the link assembly; required to assemble track group.

553
 Track-Type Loaders
977

977 SEALED TRACK

20A1-2508
6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 44 sections 2 -- 1
Track Links
RH Pin End Master 1 3P-3043
LH Pin End Master 1 3P-3044
RH Bushing End Master 1 3P-3045
LH Bushing End Master 1 3P-3046
RH Regular 43 3P-7153
LH Regular 43 3P-7154
Other Components
Pin 44 6B-5502
Bushing 44 5S-0710
Seal (Sealed) 176 5S-0709
2
Track Hardware
Bolt 172 7H-3597
Nut 172 1M-1408
Master Bolt 4 3P-2274
Special Sets/Groups
Pin and Bushing Group (38 Sections) 1 6P-4234
1 Order 3P-5762 link assembly and remove two sections.
2 Not part of the link assembly; required to assemble track group.

977 HYBRID TRACK SHOES

USE WITH TRACK LINKS 233-0385, 233-0386
8.50" (215.9 mm) PITCH 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Double Grouser 18.0" (460 mm) 8E-4434 263-9760
Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761

977 TRACK SHOES

8.50" (215.9 mm) PITCH -- 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 18.0" (460 mm) 6P-3068 6P-3069
Double Grouser 18.0" (460 mm) 8E-4434 8E-4435
Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 8E-4437
Triple Grouser 18.0" (460 mm) 8S-4468 8E-4437 1
Steel Mill Flat 16.0" (405 mm) 7T-1312 7T-1313
1 Double grouser master.

554
 Track-Type Loaders
977

977 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

TYPE WIDTH PART NUMBER

Double Grouser 18.0" (460 mm) 8E-4424
Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-4468

977 TRACK SHOES

6.91" (175.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Moderate Service 16.0" (405 mm) 5S-0820 3P-3888
Single Grouser - Moderate Service 18.0" (460 mm) 5S-0821 3P-3889
Double Grouser 15.0" (380 mm) 8E-4724 8E-4725

977 SPROCKETS
11K5959-UP, 14X
8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 8P-0622
Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9679
Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219
Bolt 20 282-3655
Nut 20 7H-3608

977 SPROCKETS
11K2960-5958
8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 9S-9651
Sprocket Segment (3Tooth) 9 6Y-5026
Adapter Ring 1 1 3S-8252
Bolt 27 282-3655
Nut 27 7H-3608
1 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines

555
 Track-Type Loaders
977

977 SPROCKETS
46H, 11K1-2959
8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 3S-9199
Sprocket Segment (3 Tooth) 9 6Y-5026
Adapter Ring 1 1 3S-8252
Bolt 27 282-3655
Nut 27 7H-3608
1 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines

977 SPROCKETS
53A
8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Segment (5 Tooth) 2 3S-9138
Sprocket Segment (4 Tooth) 4 3S-9139
Adapter Ring 1 1 3S-8252
Rim 1 3S-7090
Bolt 26 282-3655
Nut 26 7H-3608
1 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines

977 SPROCKETS
20A
6.91" (175.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 5S-0726
Sprocket Segment (3 Tooth) 9 185-6151
Mud/Snow Segment (3 Tooth) 9 8P-9453
Adapter Ring 1 5S-0834
Rim 1 5S-4822
Bolt 27 3S-8182
Nut 27 7H-3607

556
 Track-Type Loaders
977

977 IDLERS
CURRENT MODEL
11K, 14X, 46H, 48J, 70J

(PER MACHINE) QUANTITY PART NUMBER

Standard Idler Assembly 2 1S-8186
1
Extended Wear Idler Assembly 2 7T-4509
Other Components
Bushing Assembly 2 3P-8432
2
Bearing 1 8P-6651
Shaft 1 9M-9758
Bearing Block 1 7G-1901
Bearing Block 1 7G-1902
Seal -- Duo-Cone Group 2 6Y-0925
2
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Seal -- Plug 1 1S-8947
Bolt 12 3B-1915
Washer 12 3B-4506
Plug 1 2P-0347
Lock 2 5M-5000
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
1 For use with Extended Wear Life Track
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

557
 Track-Type Loaders
977

977 IDLERS
FORMER MODEL
11K, 46H, 48J, 70J

FORMER
(PER MACHINE) QUANTITY PART NUMBER
Standard Idler Assembly 2 1S-8186
1
Extended Wear Idler Assembly 2 7T-4509
Other Components
Bushing Assembly 2 3P-8432
2
Bearing 1 8P-6651
Shaft 1 8M-0343
Bearing Block 1 8M-0341
Bearing Block 1 8M-0342
Seal -- Duo-Cone Group 2 6Y-0925
2
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Seal -- Plug 1 1S-8947
Bolt 12 3B-1915
Washer 12 3B-4506
Plug 1 2P-0347
Lock 2 8M-0344
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
1 For use with Extended Wear Life Track
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group

558
 Track-Type Loaders
977

977 IDLERS
20A3044-UP, 53A

(PER MACHINE) QUANTITY PART NUMBER

Standard Idler Assembly 2 9H-8489
1
Extended Wear Idler Assembly 2 7T-4509
Other Components
Bushing Assembly 2 3P-8432
2
Bearing 1 8P-6651
Shaft (Standard) 1 5M-2466
Shaft (Optional) 1 8M-0343
Bearing Block 1 2M-7689
Bearing Block 1 2M-7690
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Seal -- Plug 1 1S-8947
Bolt 12 3B-1915
Washer 12 3B-4506
Plug 1 2P-0347
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
1 For use with Extended Wear Life Track
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group

559
 Track-Type Loaders
977

977 CARRIER ROLLERS

11K4184-UP, 14X

(PER MACHINE) QUANTITY PART NUMBER

Group 4 1P-8717
Components of Group
Roller Shell 1 1P-8716
Shaft 1 1P-8715
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Groups
Group (Steel Mill) 1 2P-3514
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
Toric Ring 1 1 9M-9730
Seal--Cover (Steel Mill) 1 2P-3538
Seal--Shaft (Steel Mill) 1 1S-2174
Group (Arctic) 4 255-8882
Seal -- Duo-Cone Group (Arctic) 1 171-5882
Toric Ring 1 2 162-2166
1 Component of preceding group; quantity shown is the quantity per group.

560
 Track-Type Loaders
977

977 CARRIER ROLLERS

11K1-4183, 20A2509-UP, 46H

(PER MACHINE) QUANTITY PART NUMBER

Group 4 -- 1
Components of Group
Roller Shell 1 9S-8321
Shaft 1 4S-9692
Cup 2 7H-4566
Cone 2 7H-4573
Ring 1 7H-4574
Cover 1 9M-0632
Collar Assembly 1 7H-4571
Support Assembly 1 9H-7687
Plug 1 2P-0347
Bolt 4 0S-1594
Ring 1 8H-5412
Nut 1 8H-5411
Seal -- Duo-Cone Group 1 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Cover 1 2H-3934
Seal -- Support 1 5F-3144
Seal -- Shaft O-Ring 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
2
Toric Ring 2 9M-9730
1 Upgrade to 1P-8717 group.
2 Component of preceding group; quantity shown is the quantity per group.

561
 Track-Type Loaders
977

977 CARRIER ROLLERS

20A1-2508

(PER MACHINE) QUANTITY PART NUMBER

Group 4 5A-8374
Components of Group
Roller Shell 1 5A-8375
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar Assembly 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 5K-9107
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

562
 Track-Type Loaders
977

977 TRACK ROLLERS

11K5959-UP, 14X, 46H

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 118-1625
Single Flange (SF) 6 118-1623
1
Extended Wear Life (DF) 8 118-1637
Extended Wear Life (SF) 1 6 118-1636
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
1
Extended Wear Life Shell (DF) 1 9W-8356
Extended Wear Life Shell (SF) 1 1 9W-8359
Bushing Assembly 2 1P-8787
2
Bearing 1 8P-6651
Shaft 1 118-1628 3
End Collar 2 9S-0312 4
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt (7/8") 4 1D-4629
Washer 4 9H-1031
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
1 For use with Extended Wear Life Track.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Replaces former 9S-0313 shaft.
4 If 9S-0313 shaft is used, use 1 -- 9S-0312 and 1 -- 9S-0311 end collar.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

563
 Track-Type Loaders
977

977 TRACK ROLLERS

11K1-5958, 46H, 53A2259-UP

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 118-1620
Single Flange (SF) 6 118-1619
1
Extended Wear Life (DF) 8 --
Extended Wear Life (SF) 1 6 --
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
1
Extended Wear Life Shell (DF) 1 9W-8356
Extended Wear Life Shell (SF) 1 1 9W-8359
Bushing Assembly 2 1P-8787
2
Bearing 1 8P-6651
Shaft 1 118-1628 3
End Collar 2 7M-5112 4
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt (3/4") 4 1D-4609
Washer 4 5H-1504
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
2
Toric Ring 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
1 For use with Extended Wear Life Track.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Replaces former 7M-5109 shaft.
4 If 7M-5109 shaft is used, use 1 -- 7M-5112 and 1 -- 7M-5111 end collar.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

564
 Track-Type Loaders
977

977 TRACK ROLLERS

20A3043-UP, 53A1-2258

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 --
Single Flange (SF) 6 --
1
Extended Wear Life (DF) 8 --
Extended Wear Life (SF) 1 6 --
Components of Group
Roller Shell (DF) 1 8S-2931
Roller Shell (SF) 1 4S-9049
1
Extended Wear Life Shell (DF) 1 9W-8356
Extended Wear Life Shell (SF) 1 1 9W-8359
Bushing Assembly 2 1P-8787
2
Bearing 1 8P-6651
Shaft 1 5M-1732
End Collar 1 7M-3308
End Collar 1 7M-3309
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
2
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 3
Bolt (5/8") 4 0S-2318
Washer 4 3B-4510
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 2 2 9M-9730
Bushing O-Ring (Steel Mill) 2 9M-9729
Shaft O-Ring (Steel Mill) 2 8M-4390
1 For use with Extended Wear Life Track.
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

565
Track-Type Loaders
977

977 END GUIDING GUARDS

46H, 48J, 70J, 11K

(PER MACHINE) QUANTITY PART NUMBER

Front (Outer LH, Inner RH)
Guard Assembly 1 9S-5293
Wear Strip 1 9S-1046
Bolt 4 0S-1566
Lock Washer 4 3B-4510
Front (Outer RH, Inner LH)
Guard Assembly 1 9S-5294
Wear Strip 1 9S-1045
Bolt 4 0S-1566
Lock Washer 4 3B-4510
Rear (Outer RH)
Guard Assembly 1 9S-5293
Wear Strip 1 9S-1046
Bolt 4 0S-1566
Lock Washer 4 3B-4510
Rear (Outer LH)
Guard Assembly 1 9S-5294
Wear Strip 1 9S-1045
Bolt 4 0S-1566
Lock Washer 4 3B-4510

977 FINAL DRIVE GUARDS

14X1950-UP

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (RH) 1 8P-8489
Guard Assembly (LH) 1 8P-8490
Spacer 10 2A-0047
Bolt 10 1A-8537

977 FINAL DRIVE GUARDS

11K, 14X1-1949, 48J

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (RH) 1 1P-8852
Guard Assembly (LH) 1 1P-8851
Bolt 10 0S-1566
Lock Washer 10 3B-4510

566
 Track-Type Loaders
983

983 SEALED AND LUBRICATED TRACK

38K, 58K
9.00" (228.6 mm) PITCH -- 7/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 42 Section 2 -- 1
Track Links
RH Pin End Master 1 7S-9601
LH Pin End Master 1 7S-9602
RH Bushing End Master 1 7S-9603
LH Bushing End Master 1 7S-9604
RH Regular 41 7S-9181
LH Regular 41 7S-9182
Other Components
Pin 42 2P-9486
Bushing 42 2P-9484
Seal Assembly (Rigid) 84 248-1539
Thrust Ring 84 9W-3563
Stopper 42 7G-4332
Plug 42 6Y-0473
2
Track Hardware
Bolt 164 7H-3599
Nut 164 2S-2140
Master Bolt 4 8S-0395
Special Sets/Groups
Seal Set (82 Seal Assemblies) 1 250-2336
Bushing and Seal Group (41 Sections) 1 9W-8936
1 If 41, 42, section link assemblies are required order 9W-8937 and add appropriate number of sections.
2 Not part of link assembly; required to assemble track group

567
 Track-Type Loaders
983

983 SEALED TRACK

38K, 58K
9.00" (228.6 mm) PITCH -- 7/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 42 Section 2 -- 1
Track Links
RH Pin End Master 1 7S-9601
LH Pin End Master 1 7S-9602
RH Bushing End Master 1 7S-9603
LH Bushing End Master 1 7S-9604
RH Regular 41 7S-9181
LH Regular 41 7S-9182
Other Components
Pin 42 1M-1455
Bushing 42 8M-2619
Seal (Sealed) 168 8M-2620
2
Track Hardware
Bolt 164 7H-3599
Nut 164 2S-2140
Master Bolt 4 8S-0395
Special Sets/Groups
Pin and Bushing Group (41 Sections) 1 2P-6026
1 If 41, 42, section link assemblies are required order 8S-0396 and add appropriate number of sections.
2 Not part of link assembly; required to assemble track group

983 TRACK SHOES

9.00" (228.6 mm) PITCH -- 7/8" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Single Grouser - Extreme Service 20.0" (510 mm) 7S-9096 8S-0390
Single Grouser - Extreme Service 22.0" (560 mm) 7S-9093 8S-0391
Single Grouser - Moderate Service 22.0" (560 mm) 2S-6345 8S-0385
Double Grouser 22.0" (560 mm) 2P-4092 2P-4093

983 SPROCKETS
9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 8P-1473
Sprocket Segment (3 Tooth) 9 6T-6782
Mud/Snow Segment (3 Tooth) 9 9W-7259
Bolt 27 9S-2727
Nut 27 7H-3609

568
 Track-Type Loaders
983

983 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 9S-7221
Other Components
Bushing Assembly 2 6P-2083
1
Bearing 1 8P-6650
Shaft 1 9S-4324
Bearing Block 1 9S-4325
Bearing Block 1 9S-4326
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 1 2 8H-2265
Seal -- Bushing O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 1H-5728
Seal -- Plug 1 1S-8947
Bolt 12 0S-1585
Washer 12 3B-4508
Plug 1 2P-0347
Pin (Lock) 2 1S-3513
Bolt 2 1A-1460
Lock Washer 2 3B-4508
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
1
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

569
 Track-Type Loaders
983

983 CARRIER ROLLERS

OUTSIDE MOUNT

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8P-6256
Components of Group
Roller Shell 1 8P-6245
Shaft 1 8P-6255
Cup 2 7K-5448
Cone 2 7K-5449
Ring 1 9H-7759
Cover 1 5M-2043
Collar Assembly 1 9H-9414
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 3T-6269
Bolt 2 6F-7030
Lock Nut 1 0T-0329
Seal -- Duo-Cone Group 1 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-5728
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
Toric Ring 1 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group

570
 Track-Type Loaders
983

983 CARRIER ROLLERS

INSIDE MOUNT

(PER MACHINE) QUANTITY PART NUMBER

Group 4 -- 1
Components of Group
Roller Shell 1 9S-8304
Shaft 1 8M-0383
Cup 2 6Y-7652
Cone 2 4B-7255
Ring 1 9H-7759
Cover 1 5M-1669
Collar Assembly 1 9H-9414
Support Assembly 1 9H-7687
Plug 1 2P-0347
Bolt 4 0S-1594
Lock Nut 1 8H-6392
Ring (Lock) 1 8H-6393
Seal -- Duo-Cone Group 1 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Cover 1 2H-3928
Seal -- Support 1 5F-3144
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-5728
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
2
Toric Ring 2 9M-9730
1 Use 8P-6256 group for service replacement
2 Component of preceding group; quantity shown is the quantity per group

571
 Track-Type Loaders
983

983 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Double Flange (DF) 8 123-1188
Single Flange (SF) 6 123-1186
Components of Group
Roller Shell (DF) 1 9P-1449
Roller Shell (SF) 1 9G-7046
Bearing 1 2 9S-4540
Shaft 1 123-1191
Retainer 2 8P-5394
Thrust Washer 2 8E-7510
End Collar 2 9S-4536
Bolt 24 0S-1587
Washer 24 3H-7654
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Retainer O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 8F-6711
Ring 2 6H-6237
Stopper 1 7G-4332
Plug 1 6Y-0473
1
Lock 1 8F-1190
1
Plug 1 2P-0347
Mounting Hardware 2
Bolt 4 1D-4630
Washer 4 9H-1031
Special Application Roller Groups
Double Flange (DF) (Steel Mill) 8 123-1190
Single Flange (SF) (Steel Mill) 6 128-8829
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
1
Toric Ring 2 9M-9730
Seal -- Retainer O-Ring (Steel Mill) 2 4S-5898
Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390
1 Component of preceding assembly or group, quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

572
 Track-Type Loaders
983

983 END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Front (Outer LH, Inner RH)
Guard Assembly 1 9S-1030
Wear Strip 1 9M-6744
Bolt 4 0S-1973
Washer 4 5P-8249
Front (Outer RH, Inner LH)
Guard Assembly 1 9S-1029
Wear Strip 1 9M-6743
Bolt 4 0S-1973
Washer 4 5P-8249
Rear (Outer RH)
Guard Assembly 1 9S-1030
Wear Strip 1 9M-6744
Bolt 4 0S-1973
Washer 4 5P-8249
Rear (Outer LH)
Guard Assembly 1 9S-1029
Wear Strip 1 9M-6744
Bolt 4 0S-1973
Washer 4 5P-8249

983 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 3P-3836
Wear Strip 4 3P-3804
Bolt 16 0S-1592
Bolt 8 1D-4630
Washer 16 3B-4510
Spacer 8 6K-6444

983 FINAL DRIVE GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard 2 2S-0278
Bolt 12 1S-0454
Washer 12 5P-8249

573
574
 Classic
INDEX

Classic
MODELS PAGE NO.

D3G/C, D4G/C, 935, 933, 931................................................................................ 576

D5B, D6, 951, 955................................................................................................... 579
D6D, D6C, 955L...................................................................................................... 582
D7G, D7F, 977L...................................................................................................... 586

575
 Classic
D3G/C, D4G/C, 935, 933, 931

D3G/C, D4G/C, 935, 933, 931 TRACK SALT

6.125" (155.6 MM) PITCH - 9/16" BOLT

CLASSIC CAT
PART NUMBER PART NUMBER
Link Assembly - 36 Section 257-1994 206-3130
Link Assembly - 37 Section 257-1991 205-8267
Link Assembly - 39 Section 257-1990 188-8764
Link Assembly - 41 Section 257-1992 194-6843
Components of Link Assembly
Track Links
RH Master Link (Split Master Complete) 257-7767 --
LH Master Link (Split Master Complete) 257-7768 --
RH Regular 257-7765 6Y-0935
LH Regular 257-7766 6Y-0936
Other Components
Pin 257-7769 154-3660
Bushing 257-7770 188-6246
Seal Assembly 257-7771 250-4002
Thrust Ring 257-7772 6S-9049
Stopper Use Cat 5G-2247
Plug Use Cat 6Y-0473
Track Hardware 1
Nut Use Cat 7K-2017
Bolt Use Cat 4K-7038
Master Bolt (Included in Link Assembly) 257-7773 5A-3187
1 Not part of link assembly;required to assemble track group.

576
 Classic
D3G/C, D4G/C, 935, 933, 931

D3G/C, D4G/C, 935, 933, 931 TRACK SEALED

6.125" (155.6 mm) PITCH - 9/16" BOLT

CLASSIC CAT
PART NUMBER PART NUMBER
Link Assembly - 36 Section 261-8008 1 6Y-1711
1
Link Assembly - 39 Section 257-1993 6Y-1713
Components of Link Assembly
Track Links
RH Master Link (Split master Complete) 257-7767 --
LH Master Link (Split Master Complete) 257-7768 --
RH Regular 257-7765 6Y-0935
LH Regular 257-7766 6Y-0936
Other Components
Pin 257-7775 6B-5278
Bushing 257-7776 6Y-1717
Seal Washer 257-7777 6S-3146
2
Track Hardware
Bolt Use Cat 4K-7038
Nut Use Cat 7K-2017
Master Bolt (Included in Link Assembly) 257-7773 5A-3187
1 Only machines equipped with sprocket segments can use this link assembly. This link assembly has the (54 mm bushing diameter). See IRM
UC01-19 (Media # PELM1043) for additional information.
2 Not part of link assembly; required to assemble track group.

D3G/C, D4G/C, 935, 933, 931 TRACK SHOES

6.125" (155.6 MM) PITCH - 9/16" BOLT

CLASSIC CAT
TYPE WIDTH PART NUMBER PART NUMBER
Moderate Service 16.0" (405 mm) 275-3564 6Y-1381
Moderate Service Master 16.0" (405 mm) 275-3565 6Y-1382
Moderate Service 18.0" (460 mm) 275-3566 6Y-5344
Moderate Service Master 18.0" (460 mm) 275-3567 6Y-5345
Moderate Service 25.0" (635 mm) 275-3570 6Y-1385
Moderate Service Master 25.0" (635 mm) 275-3571 6Y-1386

577
 Classic
D3G/C, D4G/C, 935, 933, 931

D3G/C, D4G/C, 935, 933, 931 SPROCKETS

6.125" (155.6 MM) PITCH

CLASSIC CAT
(PER SIDE) PART NUMBER PART NUMBER
Sprockets
Segment Gp. (Contains 5 segments - No hardware) 275-3576 -- 1
Segment Bolt - 1/2" (5 bolts required per segment) Use Cat 9W-9265
2
Segment Nut Use Cat 8H-5724
Segment Washer 2 Use Cat 5P-8245
1 Order 5 segments 190-7396
2 Not required for Hystat machines (only bolts).

D3G/C, D4G/C, 935, 933, 931 TRACK ROLLERSS,CARRIER ROLLERS, IDLERS

CLASSIC CAT
PART NUMBER PART NUMBER
Track Rollers
Track Roller Group - SF 275-3579 -1
Track Roller Group - DF 275-3580 -2
Mounting Bolts - 12 mm (D4G/D3G) Use Cat 6V-8197
Mounting Washers - (D4G/D3G) Use Cat 2M-0849
Mounting Bolts - 1/2" (D4C/D3C) Use Cat 0S-1585
Mounting Washers - (D4C/D3C) Use Cat 2M-0849
Carrier Rollers
Carrier Roller Group 275-3578 6S-3609
Idlers
Idler Group (With Brackets)(D4G/D3G) 275-4086 -3
Idler Group (With Brackets) (D4C/D3C) 275-3581 -4
1 Roller Groups 238-7483(D4G/D3G) or 231-3079 (D4C/D3C)
2 Roller Groups 238-7484 (D4G/D3G) or 231-3080 (D4C/D3C)
3 Idler Groups 184-6590 or 184-6591
4 Idler Groups 164-1047 or 185-4037

578
 Classic
D5B, D6, 951, 955

D5B, D6, 951, 955 TRACK SALT

D5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X,
26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J
955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,
951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UP
D6B: 37A, 44A, 8U, 9U
6.91" (175.4 mm) PITCH - 5/8" BOLT

FORMER
NEW CLASSIC CLASSIC CAT
PART NUMBER PART NUMBER PART NUMBER
Link Assembly - 39 Section 257-8020 200-9180 154-3672
Link Assembly - 41 Section 260-1509 -- 154-3667
Link Assembly - 46 Section 257-8021 175-8019 154-3676
Components of Link Assembly
Track Links
RH Master Link (Split Master Complete) 257-8016 175-8925 --
LH Master Link (Split Master Complete) 257-8017 175-8926 --
RH Regular 257-8012 175-8248 3P-7153
LH Regular 257-8013 175-8249 3P-7154
Other Components
Pin 260-1507 188-5844 160-7818
Bushing 260-1508 188-5835 7T-4636
Seal Assembly 259-7062 188-5851 250-3990
Thrust Ring 188-5773 188-5773 3P-3878
Stopper Use Cat Use Cat 5G-2247
Plug Use Cat Use Cat 6Y-0473
1
Track Hardware
Bolt 175-8552 175-8552 7H-3597
Nut 200-9150 200-9150 1M-1408
Master Bolt (Included in Link Assembly) 200-9133 200-9133 3P-2274
1 Not part of link assembly; required to assemble track group.

579
 Classic
D5B, D6, 951, 955

D5B, D6, 951, 955 TRACK SEALED

D5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X,
26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J
955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,
951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UP
D6B: 37A, 44A, 8U, 9U
6.91" (175.5mm) PITCH - 5/8" BOLT

FORMER
NEW CLASSIC CLASSIC CAT
PART NUMBER PART NUMBER PART NUMBER
Link Assembly - 46 Section (with split master links) 257-8022 175-8723 3P-5762
Components of Link Assembly
Track Links
RH Master Link (Split Master Complete) 257-8016 175-8925 --
LH Master Link (Split Master Complete) 257-8017 175-8926 --
RH Regular 257-8012 175-8248 3P-7153
LH Regular 257-8013 175-8249 3P-7154
Other Components
Pin 175-8923 175-8923 6B-5502
Bushing 260-1512 175-8924 5S-0710
Seal Washer 188-5765 188-5765 5S-0709
1
Track Hardware
Bolt 175-8552 175-8552 7H-3597
Nut 200-9150 200-9150 1M-1408
Master Bolt (Included in Link Assembly) 200-9133 200-9133 3P-2274
Special Sets/Groups
Pin and Bushing Group (40 Sections sealed track) -- 175-8396 --
Pin and Bushing Group (46 Sections sealed track)) -- 175-8397 --
1 Not part of link assembly; required to assemble track group.

D5B, D6, 951, 955 TRACK SHOES

6.91" (175.5MM) PITCH - 5/8" BOLT

CLASSIC CAT
TYPE WIDTH PART NUMBER PART NUMBER
Moderate Service 18.0" (460 mm) 175-8020 5S-0821
Moderate Service Master 18.0" (460 mm) 175-8021 3P-3889
Moderate Service 20.0" (510 mm) 175-8365 5S-0822
Moderate Service Master 20.0" (510 mm) 175-8366 3P-3890
Moderate Service 22.0" (560 mm) 175-8367 5S-0823
Moderate Service Master 22.0" (560 mm) 175-8368 3P-3891
Moderate Service 24.0" (610 mm) 175-8673 7S-0706
Moderate Service Master 24.0" (610 mm) 175-8674 3P-3892
Moderate Service 34.0" (865 mm) 175-8022 7S-9567
Moderate Service Master 34.0" (865 mm) 175-8023 3P-3896
Triple Grouser 15.0" (380 mm) 175-8553 3T-3690
Double Grouser Master (Use w/triple) 15.0" (380 mm) -- 8E-4725

580
 Classic
D5B, D6, 951, 955

D5B, D6, SPROCKETS 1

CLASSIC CAT
PART NUMBER PART NUMBER
Sprockets
Segment Gp. (Contains 9 segments - No hardware) 260-1511 -- 2
Segment Bolt - 5/8" (3 bolts required per segment) Use Cat 3S-8182
Segment Nut Use Cat 7H-3607
1 Segments cannot be used on 951, 955 machines due to different segment bolt pattern design, use Cat genuine segments.
2 Order 9 segments 185-6151

D5B, D6, 951, 955 TRACK ROLLERS, CARRIER ROLLERS, IDLERS

CLASSIC CAT
PART NUMBER PART NUMBER
Track Rollers
Track Roller Group - SF 175-8024 118-1611
Track Roller Group - DF 175-8025 118-1612
Mounting Bolts - 5/8" Use Cat 8S-9092
Mounting Washers - 5/8" Use Cat 5P-8247
Carrier Rollers
Carrier Roller Group 200-9185 5A-8374
Idlers
Idler Group (Complete) (Not for use on 561 Pipelayers) 200-9235 --
Idler Assembly (shell without bushings) 175-8255 8S-2560

581
 Classic
D6D, D6C, 955L

D6D, D6C, 955L TRACK SALT

D6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 1Y, 7XF
D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R
955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181&UP
8.00" (203.2 mm) PITCH - 3/4" BOLT

CLASSIC CAT
PART NUMBER PART NUMBER
Link Assembly - 36 Section 175-8555 1 236-9861
1
Link Assembly - 39 Section 188-5527 --
1
Link Assembly - 41 Section 188-5588 --
Components of Link Assembly
Track Links
RH Master Link (Split Master Complete) 175-8927 --
LH Master Link (Split Master Complete) 175-8928 --
RH Regular 175-8256 7T-4645
LH Regular 175-8257 7T-4646
Other Components
Pin 188-5694 160-7819
Bushing (Outside Diameter 69 mm) 188-5693 3P-1109
Seal Assembly 259-7063 250-3996
Thrust Ring 188-5679 3P-1104
Stopper Use Cat 9G-1642
Plug Use Cat 6Y-0473
2
Track Hardware
Bolt 188-5633 1S-1859
Nut 188-5856 1S-1860
Master Bolt (Included in Link Assembly) 188-5634 9S-1838
1 Link assembly is similar to Extended Wear life track (bushing diameter 69 mm vs, 72 mm).
2 Not part of link assembly; required to assemble track group.

582
 Classic
D6D, D6C, 955L

D6D, D6C, 955L TRACK SEALED

D6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 1Y, 7XF
D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R
955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181&UP
8.00" (203.2 mm) PITCH - 3/4" BOLT

FORMER
NEW CLASSIC CLASSIC CAT
PART NUMBER PART NUMBER PART NUMBER
Link Assembly - 36 Section (with split master links 290-6589 --
Link Assembly - 36 Section (w/o split master links) 175-8353 ---
Components of Link Assembly
Track Links
RH Master Link (Split Master Complete) 175-8927 --
LH Master Link (Split Master Complete) 175-8928 --
RH Regular 175-8256 175-8256 7T-4645
LH Regular 175-8257 175-8257 7T-4646
Other Components
Pin 175-8929 175-8929 4M-5989
Master Pin 188-5800 8E-0855
Bushing 175-8930 175-8930 4M-5991
Master Bushing 175-8682 4M-5992
Seal 188-5764 188-5764 8M-7231
Spacer (Master Joint) 188-5767 8M-7290
1
Track Hardware
Bolt 188-5633 188-5633 1S-1859
Nut 188-5856 188-5856 1S-1860
Master Bolt (Included in Link Assembly 188-5634 188-5634 9S-1838
1 Not part of link assembly; required to assemble track group.

583
 Classic
D6D, D6C, 955L

D6D, D6C, 955L TRACK SHOES

8.00" (203.2 mm) PITCH - 3/4" BOLT

CLASSIC CAT
TYPE WIDTH PART NUMBER PART NUMBER
Moderate Service 18.0" (460 mm) 188-5270 6Y-6289
Moderate Service Master 18.0" (460 mm) 175-8728 6Y-6290
Moderate Service 20.0" (510 mm) 175-8031 6Y-6291
Moderate Service Master 20.0" (510 mm) 175-8032 6Y-6292
Moderate Service 22.0" (560 mm) 175-8369 6Y-6293
Moderate Service Master 22.0" (560 mm) 175-8370 6Y-6294
Moderate Service 24.0" (610 mm) 175-8371 6Y-6295
Moderate Service Master 24.0" (610 mm) 175-8372 6Y-6296
ExtremeService 20.0" (510 mm) 188-5396 6Y-6395
Extreme Service Master 20.0" (510 mm) 188-5591 6Y-6394
Extreme Service 22.0" (560 mm) 188-5397 6Y-6411
Extreme Service Master 22.0" (560 mm) 188-5592 6Y-6412
Extreme Service 24.0" (610 mm) 188-5593 6Y-6398
Extreme Service Master 24.0" (610 mm) 188-5594 6Y-6397
Double Grouser 17.0" (432 mm) 188-5381 8E-4501
Double Grouser Master 17.0" (432 mm) 188-5385 8E-4502
Double Grouser 21.0" (534 mm) 188-5383 8E-4499
Double Grouser Master 21.0" (534 mm) 188-5387 8E-4500

D6D, D6C, 955L SPROCKETS

8.00" (203.2 mm) PITCH

CLASSIC CAT
PART NUMBER PART NUMBER
Sprockets
Segment Gp. (Contains 5 segments - No hardware) 188-5635 -- 1
Segment Bolt - 5/8" (4 required per segment) Use Cat 3S-8182
Segment Nut Use Cat 7H-3607
Segment Gp. (Contains 5 segments - No hardware) (For machine Serial No. 6HC) 260-5851 -- 2
Segment Bolt - 3/4" (4 required per segment) Use Cat 117-1617
Segment Nut Use Cat 7H-3608
1 Order 5 segments 8E-4365
2 Order 5 segments 117-1616.

584
 Classic
D6D, D6C, 955L

D6D, D6C, 955L TRACK ROLLERS, CARRIER ROLLERS, IDLERS

CLASSIC CAT
PART NUMBER PART NUMBER
Track Rollers
Track Roller Group - SF (3/4" mounting bolt) 188-5272 118-1617 1
Track Roller Group - DF (3/4" mounting bolt) 188-5271 118-1618 2
Mounting Bolts - 3/4" Use Cat 1D-4608
Mounting Washers 3/4" Use Cat 5H-1504
Track Roller Gp. - SF (5/8" mounting bolt) 175-8035 118-1614 3
Track Roller Gp. - DF (5/8" mounting bolt) 175-8036 118-1615 4
Mounting Bolts - 5/8" Use Cat 1A-8537
Mounting Washer - 5/8" Use Cat 2S-0736
Carrier Rollers
Carrier Roller Group 188-5590 3T-3206
Idlers
Idler Group (Complete) 200-9236 6L-9210
5
Idler Group 175-8038 --
Idler Assembly (shell without bushings) 175-8263 7T-4562
1Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
2Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
3Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
4Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
5The Idler Group 175-8038 includes shaft and bushings, (not a complete top level group) no bearing blocks. Use Caterpillar 6Y-0925 Duo-Cone
Seal Groups and Caterpillar bearing blocks 5M-5003/5M-5004 for final group assembly.

585
 Classic
D7G, D7F, 977L

D7G, D7F, 977L TRACK SALT

D7G: 64V, 65V, 91V, 92V
D7F: 91E, 92E, 93N, 94N
977L: 14X, 64X, 95X, 11K5959&UP, 70J2772&UP
8.50" (215.9 mm) PITCH - 3/4" BOLT

CLASSIC CAT
PART NUMBER PART NUMBER
Link Assembly - 38 Section (D7) 188-5595 117-1024
Link Assembly - 39 Section (977) 175-8759 3P-0628
Components of Link Assembly
Track Links
Link - RH Master (Split Master Complete) 188-5700 ---
Link - LH Master (Split Master Complete) 188-5701 ---
Link - RH 188-5251 8S-2589
Link - LH 188-5252 8S-2590
Other Components
Pin 188-5699 3P-0622
Bushing 188-5698 3P-0621
Seal Assembly 259-7064 250-3998
Thrust Ring 188-5721 3P-0623
Stopper Use Cat 7G-4332
Plug Use Cat 6Y-0473
1
Track Hardware
Bolt 188-5636 7H-3598
Nut 188-5856 1S-1860
Master Bolt (Included in Link Assembly) 188-5637 2P-9670
1 Not part of link assembly; required to assemble track group.

586
 Classic
D7G, D7F, 977L

D7G, D7F, 977L TRACK SHOE

8.50" (215.9 mm) PITCH - 3/4" BOLT

CLASSIC CAT
TYPE WIDTH PART NUMBER PART NUMBER
Moderate Service 20.0" (510 mm) 188-5333 1P-9807
Moderate Service Master 20.0" (510 mm) 188-5601 3P-0615
Moderate Service 22.0" (560 mm) 175-8802 1P-9808
Moderate Service Master 22.0" (560 mm) 175-8881 3P-0616
Moderate Service 24.0" (610 mm) 175-8882 1P-9809
Moderate Service Master 24.0" (610 mm) 188-5246 3P-0617
Moderate Service 26.0" (660 mm) 188-5334 1P-9810
Moderate Service Master 26.0" (660 mm) 188-5602 3P-0618
Extreme Service 22.0" (560 mm) 188-5603 5S-6910
Extreme Service Master 22.0" (560 mm) 188-5604 2P-9669
Extreme Service 24.0" (610 mm) 188-5605 5S-6911
Extreme Service Master 24.0" (610 mm) 188-5606 3P-0620
Double Grouser 18.0" (460 mm) 188-5263 8E-4434
Double Grouser Master 18.0" (460 mm) 188-5264 8E-4435
Double Grouser (TRAP) 18.0" (460 mm) 188-5261 8E-4436
Double Grouser Master (TRAP) 18.0" (460 mm) 188-5262 8E-4437

D7G, D7F, 977L SPROCKETS

CLASSIC CAT
PART NUMBER PART NUMBER
Sprockets
Segment Gp. (Contains 5 segments - No hardware) 188-5638 --- 1
Segment Bolt - 3/4" (4 required per segment) Use Cat 282-3655
Segment Nut Use Cat 7H-3608
1 Order 5 segments 8E-4675

587
 Classic
D7G, D7F, 977L

D7G, D7F, 977L TRACK ROLLERS, CARRIER ROLLERS, IDLERS

CLASSIC CAT
PART NUMBER PART NUMBER
Track Rollers
Track Roller Group - SF (7/8" mounting bolt) 188-5596 118-1623
Track Roller Group - DF (7/8" mounting bolt) 188-5597 118-1625
Mounting Bolts - 7/8" Use Cat 1D-4629
Mounting Washers 7/8" Use Cat 9H-1031
Track Roller Gp. - SF (3/4" mounting bolt) 188-5257 118-1619
Track Roller Gp. - DF (3/4" mounting bolt) 188-5258 188-1620
Mounting Bolts - 3/4" Use Cat 1D-4609
Mounting Washer - 3/4" Use Cat 5H-1504
Carrier Rollers
Carrier Roller Group 188-5600 1P-8717
Idlers
Idler Group (Complete) 200-9237 6L-9211
1
Idler Assembly (shell without bushings) 188-5268 1S-8186
1 Two different idler shafts can be used with the 188-5268 idler assembly, but idler shafts require different bearing blocks see the following: Idler
Shaft 8M-0343 (end diameters 63.5 mm) requires the use of 8M-0341 & 8M-0342 bearing blocks. Idler Shaft 9M-9758 (end diameters 62.7 mm)
requires the use of 7G-1901 & 7G-1902 bearing blocks.

588
 Nexus
Nexus

NEXUS: Refer to NEXUS CD Media Number PERJ0028

For Additional Information Contact:

- PAMELA WOLFE

(309) 675-3259 or [email protected]

589
590
 Product Information
INDEX

Product Information
MODELS PAGE NO.

LINK ASSEMBLIES.................................................................................................592
TRACK LINKS......................................................................................................... 593
TRACK PINS / TRACK BUSHINGS........................................................................ 595
TRACK SEALS........................................................................................................596
SPROCKETS.......................................................................................................... 598
TRACK SHOES.......................................................................................................599
TRACK HARDWARE.............................................................................................. 602
TRACK ROLLERS.................................................................................................. 604
CARRIER ROLLERS.............................................................................................. 609
IDLERS................................................................................................................... 610
GUARDS................................................................................................................. 611
PROPER TRACK SAG........................................................................................... 612
TRACK ROLLER FRAME EXTENSION................................................................. 613

591
 Product Information
LINK ASSEMBLIES

LINK ASSEMBLIES
Functions
• Provide a rail for the machine to run on.
• Provide a means to attach track shoes.
• Transmits driving force from track bushing to track shoe.
Requirements
• Flexible joints between sections.
• Matched wear and structural life of components.
• Components replaceable and/or reusable.
Sleeve Bearing Track
Features
• Assembled from components designed and manufactured to fit and work
together as a system.
• Pins, bushings and links resist loosening, cracking, and breaking until worn
beyond wear limits.
• Designed for a second wear life if proper maintenance and rebuilding
practices are followed.
Supporting Reference Material Available
• Sleeve Bearing Track Data Sheet (PEHJ0004)
• Grease Lubricated Track Data Sheet (PEHP9555)
• SystemOneTM Undercarriage Elevated Sprocket Machines (PEHJ0060)
• SystemOneTM Undercarriage Oval Track Machines (PEHJ0064) Grease Lubricated Track
• Positive Pin Retention Data Sheet (PEHP7025)
• Heavy Duty Track Data Sheet (PEHP5031)
• Rotating Bushing Track Data Sheet (PEHP5030)
• Sealed and Lubricated Track Data Sheet (PEDP0036)

Note: Sealed Track is not offered on elevated sprocket tractors.

SystemOneTM Track Positive Pin Retention Track Heavy Duty Track

Rotating Bushing Track Sealed and Lubricated Track Sealed Track

592
 Product Information
TRACK LINKS

TRACK LINKS
Rail
Functions
• Provide a continuous rail for rollers. Bushing
Bore
• Support weight of the machine.
Requirements
• Machined to close tolerances for pin, bushing and shoe retention.
• Long rail wear life.
Self-Locking
• Resist cracking, spalling and fatigue failures. Nut Seat
Pin Bore
• Rebuildable. Massive
Strut
Features
• Forged of Deep Hardening Steel. • Massive strut design.
• High body hardness. • Self-locking nut seats.
• Uniform rail hardness. • Rebuildable.
• High rail design.
Deep Hardening Steel
Deep Hardening Steel used in current links allows high body hardness, greater hardened depth and greater fatigue
resistance than plain medium carbon steel.
High Body Hardness
Links on current track-type tractors, loaders, and excavators have a high body hardness. This increases toughness,
durability, fatigue resistance and improves pin and bushing retention.

Uniform Rail Hardness

Link rails are pattern induction heated, spray water quenched and Hardened
furnace tempered for a deep, uniform hardened depth. This gives link Pin Depth
rails a crown hardness pattern that resists side wear and roll-over. The Boss
hardened rail matches the track roller tread and flange hardness for
optimum wear life.

High Rail Design

The high rail design link has more pin boss-to-roller flange clearance
(working clearance) than former links. This means longer link and roller
wear life potential. Body
Hardness
Rebuildability
Caterpillar track links are rebuildable; high body hardness results in good pin and bushing retention, even after
repeated disassembly and reassembly.

Massive Strut Design

Provides the best available resistance to cracking failures
that result from flexing shoes, pins, and bushings.
Self-locking Nut Seats
Allow easy installation and removal of track shoes. Also, help
keep hardware tight.
The nut and nut seat on “L”, “N”, “R”, and “T” series Self-Locking nut seat Mailbox Design
tractors are rounded to reduce stress risers in the link. Nut Seat

593
 Product Information
TRACK LINKS

SPLIT MASTER LINK

Function
• Allows convenient removal and installation of track.
• Eliminates the need for a master pin and master bushing.
Requirements
• Wear life equal to regular link.
• Same strength as regular link.
• Serviceable and Reusable.
Features
• Bolt-together design for faster and easier assembly and disassembly.
• Allows use of regular pins and bushings.
• Factory assembled with lubricant.
Bolt-Together Design
Removing and installing track has always been time consuming. To improve this, Caterpillar designed a two-piece or
split master track link, joined with bolts. Only a wrench is needed to separate the track in place of field press tooling.
Regular Pins and Bushings
Split master links require no master pins, master bushings, nor spacers. Instead they use standard pins and bushings.
Thus, pins and bushings in split master links wear at the same rate as all others and can be turned along with others.
NOTE: Split master links often require a master shoe, with different bolt hole pattern than other shoes and
four special track bolts.
MASTER LINK ASSEMBLING AND TORQUING PROCEDURE
1. Before installing the track, the point of connection for the master link must be clean and undamaged. Remove all
paint and rust from the point of connection.
2. Put 2P-2506 Thread Lubricant or 5P-3931 Anti-seize Compound on the bolt threads.
3. Put the master links together and check alignment of holes for the master bolts. Install one master bolt in each link.
The bolts must turn easily in the threads when turned by hand.
4. Remove the bolts. Install the master track shoe and all four master bolts.
5. Tighten the master bolts to the initial torque given below, plus 1/2 turn (D9L, D8L, D10T/R/N, D9T/R/N, D8T/R/N,
D7H S&L and D6R/H receive additional 1/3 turn rather than 1/2 turn).
Model Bolt Size Initial Torque
D11N, D11R 1-3/8-12 1100 ± 50 ft. lbs. 1500 ± 70 Nm
D10T, D10R, D10N, D10 1-1/8-12 650 ± 50 ft. lbs. 870 ± 70 Nm
D9T, D9R, D9N, D9L 1-14 650 ± 50 ft. lbs. 870 ± 70 Nm
D9H 1-14 400 ± 50 ft. lbs. 550 ± 70 Nm
D8T, D8R, D8N, D8L 7/8-14 480 ± 50 ft. lbs. 650 ± 70 Nm
D8K, 983, 973, D7R 7/8-14 250 ± 50 ft. lbs. 340 ± 70 Nm
D7H, D6H, D5H, D6M, D6R, D6N, 517, 527 3/4-16 300 ± 50 ft. lbs. 400 ± 70 Nm
D6D, 963, 955, D7G, 977, 973 3/4-16 220 ± 40 ft. lbs. 300 ± 50 Nm
D5G, 939, D4H, D5M HD/RBT, D4H, D5C, D4E, 943, 941, D5H, D5, 953, 951, D5M, D5N 5/8-18 120 ± 30 ft. lbs. 170 ± 40 Nm
D3, D4B, D4C, 931, 935, D3C, D4G, D3G 9/16-18 65 ± 15 ft. lbs. 90 ± 20 Nm

SystemOne™ LINK BOX

• Serviced at the Link Box level
• Contains two common links and two cartridges
• Track Links
• New rail design for increase wear life
• Stronger straight link design
• Forged of deep hardened steel that provides high body hardness, hardened depth and toughness
• Rail guided design for superior guiding
• Self-locking nuts
• Cartridge
• Factory sealed and welded to control end play
• Improved seal integrity through an innovative new sealing system
• Uses standard Caterpillar Synthetic SAE 75W-140 gear oil to lubricate the joint

594
 Product Information
TRACK PINS / TRACK BUSHINGS

TRACK PINS
Functions
• Help hold track section together.
• Act as hinge with bushing at adjoining section.
• Transfer loads between bushing and link. Sealed Track Pin
• Provide reservoir for lubricant in Sealed and Lubricated Track.
Requirements
• Strength — to resist flexing and cracking, even when worn to limit.
• Wear Resistant.
• Finished to close dimensions — for accurate press fit with link and Sealed and Lubricated
clearances with bushing I.D. Track Pin

Features
• Machined from medium carbon steel.
• Heat treated.
—Induction hardened.
—Spray water quenched.
—Tempered.
• Sealed and Lubricated Track pins ground to final dimensions.

MEDIUM CARBON STEEL

Caterpillar manufactures track pins from a medium carbon steel which provides a tough pin with good surface
hardness. This provides good spalling and cracking resistance in high impact conditions.
Sealed and Lubricated Track pins are center drilled to provide an oil reservoir and cross drilled to provide a passage
for the oil to flow between the pin and bushing. After heat treatment the pin ends are ground to provide the close final
dimensions required for accurate press fit and oil retention.
TRACK BUSHINGS
Functions
• Help hold track section together.
• Act as hinge with pin of adjacent section.
• Provide sealing surface to keep abrasives out and lubricant in with Sealed and Straight Wall
Lubricated Track.
Requirements
• Strength — to resist cracking, even when worn to service limits.
• Finished to close dimensions — for accurate press fit into link bushing bore
clearance with pin O.D.
• Wear resistant — on I.D. equal to pin, on O.D. greater than sprocket. Stepped
• Smooth finish on end — to maximize sealing and minimize seal wear.
Features
• Formed by cold extrusion of low carbon steel. (Extruded bushings have
smoother inner and outer surfaces with more uniform dimensions than machined
bushings.
• Carburized and heat treated for optimum hardness and toughness.
Difference between Sealed Track bushings and Sealed and Lubricated Track bushings
Sealed and Lubricated Track bushings are:
• Polished on the ends for a smooth sealing surface.
• Shorter than Sealed Track bushings to provide the space needed in the link counterbore for the thicker thrust ring
and seal.

595
 Product Information
TRACK SEALS

SEALED TRACK SEALS

Functions
• Retard abrasive entry between pin and bushing.
• Prevent bushing from wearing against link counterbore.
• Carry side loads.
Requirements
• Wear life equal to pin and bushing turn time.
• Have spring-like resiliency without brittleness.
Features
• Made from hardened and tempered spring steel.
Seals are formed like cone shaped washers. Used in pairs, they fit into
each link counterbore. One washer butts against the bushing end, the
other against the link counterbore base. When track sections are
pressed together, the washers flatten to form a seal. The spring effect
of the flattened washers maintains sealing pressure as they wear. Seals
are designed to wear against each other instead of against the link
counterbore and bushing end. This system extends internal pin and
bushing life by 20-30% compared to unsealed track. Sealed Track
Uncompressed Seals Compressed Seals
Seals are not reusable at turn time.
GREASE LUBRICATED TRACK SEALS
Internal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineers
have designed a track system that reduces internal pin and bushing wear on excavators. The sealing arrangement is
what makes this reduction possible.

Functions
• Keep abrasives out of internal pin and bushing joint.
• Keep grease in joint.
• Absorb side or thrust loads.
• Reduction in noise compared to Sealed Track.
Requirements
• Pin and Bushing internal wear life affected less by external
environment.
• Not a lifetime lubricated track.
Features
• Seal Assembly – Consists of a “W” shape polyurethane seal. The
seal contacts the smooth bushing end. The seal distributes an even
load along the sealing surface to assure a 360° seal.
• Seals are designed to operate at a maximum temperature of 70° C
(160° F). Exposure to high temperatures will reduce seal life.
• Shorter bushing compared to Sealed Track.
Benefits of Grease Lubricated Track
• Internal pin and bushing wear reduced as the primary maintenance consideration.
• The system keeps abrasives from entering the internal pin, bushing, and link counterbore area of the joint.
• Grease reduces normal friction and wear between the pin and bushing.
• Decrease of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on other
components, such as links, rollers, and guiding components.
• Most undercarriage components are reusable.
• Internal bushing life is extended about 20% compared to Sealed Track.

596
 Product Information
TRACK SEALS

SEALED AND LUBRICATED TRACK SEALS

Internal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineers
designed a track system that would eliminate internal pin and bushing wear as a maintenance consideration. The
sealing arrangement is what makes this possible.

Functions
• Keep abrasives out of internal pin and bushing joint.
• Keep lubricant in joint.
• Absorb side or thrust loads.
Requirements
• Pin and Bushing internal wear life not affected by external environment.
Features
• Seal Assembly — Consists of a plastic seal and resilient rubber load ring. The seal
contacts the smooth bushing end. The rubber load ring distributes an even load along the
sealing surface to assure a 360° seal.
Seals are designed to operate at a maximum temperature of 70° C (160° F). Exposure to
higher temperatures will reduce seal life.
• Greater end play capacity from .030 to .060.
• Thrust Ring — Made from hardened steel, it protects the seal assembly from side thrust
loads. The ring has notches so the oil can flow past the ring into the sealing areas.
• Rigid Seal Design now available for all Elevated Sprocket machines, Low Sprocket
machines, and Track Type Loader machines.

Benefits of Sealed and Lubricated Track

• Internal pin and bushing wear eliminated as the primary maintenance consideration.
Rigid Seal
• The system keeps abrasives from entering the internal pin, bushing, and link counterbore
area of the joint.
• Lubricant eliminates normal friction and wear between the pin and bushing.
• Absence of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on other
components, such as links, rollers and guiding components.
• Most undercarriage components are reusable.
• External bushing life is extended about 50% compared to Sealed Track.

Oil
• Caterpillar uses Synthetic SAE 75W–140 gear oil to lubricate the joint.

597
 Product Information
SPROCKETS

SPROCKETS

Function
• Transfer driving loads from the final drive to the track through the bushings.
Requirements
• Wear life — equal to at least one side of the bushing.
• Strength — to resist cracking.
BOLT-ON SEGMENTS
Used on: All Track-Type Tractors and Track-Type Loaders, but not available
for D4E or 941.
Features
• Formed from Deep Hardening Steel. Bolt-on Segments
• Both segments and sprockets are manufactured to accurately mate with
bushings.
• Tightly controlled manufacturing processes to ensure proper mounting segment hardware.
Benefits of Bolt-on Sprocket Segments
• Reduced maintenance and downtime.
• No need to remove track group to replace sprockets.
• Segments are easier to handle.
• No risk of misalignment.
• Reversible — switching segments to opposite sides of the machine can increase sprocket life.
Conversion to Bolt-on Sprocket Segments
A one-piece weld-on adapter ring is available for converting some older
models to bolt-on sprocket segments. Once a customer converts a machine to
the bolt-on design, he will save both labor and downtime cost when the
segments need replacing.
Torquing Procedure
Proper installation of sprocket segments is critical in preventing segment
loosening and subsequent loss/damage to other parts. Install segments using Cast Assembly and Weld-on Rim
the following guidelines:
1. Lubricate the bolt threads with 5P3931 Anti-Seizure Compound.
2. Make sure the washer is against the final drive hub (not segment).
3. Tighten all bolts to the following:
Model Initial Torque
D11R, D11N, D10T, D10R, D10N, D10 650 ft. lb. ± 50 ft. lb. (870 ±70 Nm)
D9T, D9R, D9N, D9L 480 ft. lb. ± 50 ft. lb. (650 ± 70 Nm)
D9H, D8K, 983 250 ft. lb. ± 50 ft. lb. (340 ± 70 Nm)
D8T, D8R, D8N, D8L, D7R, D7H, D7G, 977, 973 220 ft. lb. ± 40 ft. lb. (300 ± 55 Nm)
D6T, D6R, D6H, D6D, D5H, D5B, D4H, D5C, D5M, D6M, D5N, D6N, D6K 130 ft. lb. ± 30 ft. lb. (175 ± 40 Nm)
953B and 943, 963, 955, 939 130 ft. lb. ± 30 ft. lb. (175 ± 40 Nm)
953C 75 ft. lb. ± 15 ft. lb. (100 ± 20 Nm)
D3G, D4G, D4C, D3C, 935, 933, 931 50 ft. lb. ± 7 ft. lb. (70 ± 10 Nm)
4. Then tighten an additional 1/3 turn. This stretches the bolt properly for good retention.
CAST ASSEMBLY, WELD-ON, AND BOLT-ON RIM
Used on: Earlier Tractors, Earlier Loaders, and 200 Series Excavators. Current 300 Series Excavators have bolt-on one
piece sprockets.
Features
• Cast from Deep Hardening Steel.
Deep Hardening Steel
Caterpillar sprockets are formed from Deep Hardening Steel which allows about twice the hardened depth as plain
medium carbon steel.

598
 Product Information
TRACK SHOES

TRACK SHOES

Functions
• Support the machine’s weight on the ground.
• Provide traction.
Requirements
• Strength — to resist bending and breaking.
• Wear resistant grouser and plate.
• Retention — to resist loosening during link wear life.
Features
• Furnace or induction hardened, die quenched and tempered.
• Curved leading and trailing edge.
• Rebuildable
Curved leading and trailing edges provide stiffness to reduce shoe bending and hardware loosening. Overlapped edges
keep debris from lodging between shoes as the track bends around the sprocket and idler.

Track Shoe Selection

The wide variety of working conditions makes choosing the right shoe very important. A good rule is: choose the
narrowest shoe that provides adequate flotation. Shoes that are too wide will loosen, bend and crack more easily.
They require more power to turn, and affect maneuverability. Shoes of the correct width give maximum performance
and the lowest possible cost to the entire system.

Cat offers the following track shoes:

SINGLE GROUSER MODERATE SERVICE SHOES (MS)

The Moderate Service shoe is the best shoe for low to medium impact and
abrasive conditions. It gives the best penetration and traction, resists wear and
bending and is available in various widths and modifications. Rolled from
modified medium carbon steel. Single Grouser Shoe

SINGLE GROUSER EXTREME SERVICE SHOES (ES)

Extreme Service shoes should be used wherever the Moderate Service shoe bends or breaks, or where links outlast
shoes. Extreme Service shoes are both stronger to resist bending and breaking and have more allowable wear material
than the Moderate Service shoe. Greater Strength – Extreme Service shoes are rolled from tough alloy steel. They are
also more massive. They are heat treated to provide a higher tensile strength to resist bending and breaking in high
impact conditions. More Wear Material – Extreme Service shoes have up to
approximately 50% more allowable wear material than the respective
Moderate Service shoe. More Rebuildable – Because of the thicker section on SES
the Extreme Service shoe, it can be successfully regrousered more times than ES
the Moderate Service shoe (when used in similar conditions and worn to
comparable limits). MS

SINGLE GROUSER SUPER EXTREME SERVICE SHOES (SES)

Super Extreme Service shoes provide approximately 25% more life than the
Extreme Service in high wear applications.

599
 Product Information
TRACK SHOES

MULTI-GROUSER SHOE (Triple and Double Grouser)

Multi-Grouser shoes have less penetration and traction than Single Grouser shoes,
but better turning ability. These shoes are standard on track-type loaders and
excavators because less turning resistance and greater maneuverability are needed.
By spreading tractor weight over the larger contact area of several low profile
grousers, the turning resistance is reduced and maneuverability improved. Triple Grouser

Double Grouser

SPECIAL SHOES

Self-Cleaning, Low Ground Pressure Shoe

This shoe is designed for use in loose, muddy conditions. As these shoes move
around the sprocket and idler, they separate from one another, causing debris to fall
out. These cast steel shoes come in widths that make them suitable for LGP
machines only and should not be used in high abrasive or high impact conditions. Low Ground Pressure Shoe

Chopper
This shoe is designed for use in demolition and landfill applications where
compaction is required. Designed with a full length front grouser, two angled side
grousers and a center opening for material extrusion, these shoes provide long wear
life and structural life in the most demanding underfoot conditions.

Chopper Shoe

Steel Mill Flat

Designed for use in hot slag and other heavy abrasive materials where low
penetration and high wear and bending resistance is required. Large, countersunk
bolt holes are designed to protect the bolt heads.

Steel Mill Flat

TRACK SHOE SUPPORTS FOR HYDRAULIC EXCAVATORS

Forestry applications for Hydraulic Excavators generally involve high impact and severe underfoot conditions for
the undercarriage components. For this reason, full length track shoe supports mounted to the track roller frame are
recommended for forestry applications. These shoe supports are intended to limit the torsional loads experienced
by the link assembly when the machine encounters uneven underfoot conditions.
As the machine rides over objects such as rocks or stumps, the track shoe deflects and the track chain begins to twist.
With track shoe supports, the shoes contact the support and prevent further twisting of the chain. These supports limit
the loads going into the link assembly and significantly reduce the occurrence of link cracking and track pin walking.

600
 Product Information
TRACK SHOES

TRACK SHOE DATA

Grouser Plate
Height Thickness
Model Type inch mm inch mm
D11R, D11N ES 3.98 101.0 .96 24.5
D10T, D10R, D10N ES 3.66 93.0 .81 20.5
SES 3.98 101.0 .88 22.5
D10 MS 3.66 93.0 .81 20.5
ES 3.98 101.0 .88 22.5
D9T, D9R, D9N MS 3.03 77.0 .65 16.5
ES 3.31 84.0 .75 19.0
SES 3.66 93.0 .83 21.0
D9L MS 3.07 78.0 .75 19.0
ES 3.66 93.0 .83 21.0
D9H MS 3.43 87.0 .69 17.5
ES 3.66 93.0 .81 20.5
SES 3.98 101.0 .88 22.5
D8T, D8R, D8N, D8L MS 3.07 78.0 .65 16.5
ES 3.31 84.0 .75 19.0
SES 3.66 93.0 .83 21.0
D8K MS 3.03 77.0 .65 16.5
ES 3.07 78.0 .75 19.0
SES 3.66 93.0 .83 21.0
D7H, D7R, D7G MS 2.76 70.0 .56 14.2
ES 2.81 71.5 .67 17.0
D6T, D6H, D6R, 527, D6D MS 2.56 65.0 .51 13.0
ES 2.95 75.0 .59 15.0
D5H, D6M, 517, D6N MS 2.24 57.0 .51 13.0
ES 2.60 66.0 .55 14.0
D5B MS 2.25 57.2 .50 12.7
D4H, D5C, D5M, D5N, D6K MS 1.89 48.0 .43 11.0
ES 2.24 57.0 .51 13.0
D4E, D5C, D5G MS 1.88 47.0 .44 11.2
ES 2.25 57.2 .50 12.7
D3, D4B, D4C, D3C MS 1.85 47.0 .33 8.50
D3G, D4G ES 2.10 53.5 .39 10.0
983 DG 1.75 44.5 .75 19.0
977, 973 DG 1.93 49.0 .61 15.5
955, 963 DG 1.67 42.5 .55 14.0
TG 1.06 27.0 .59 15.0
951, 953 DG 1.48 37.5 .51 13.0
TG .96 24.5 .51 13.0
939, 941, 943 DG 1.46 37.0 .43 11.0
931, 933, 935 SG 1.85 47.0 .33 8.50
TG .61 15.5 .39 10.0
5130 DG 2.91 74.0 1.1 28.0
375/385B/5080/5090B DG 1.89 48.0 .81 20.5
ES 3.66 93.0 .81 20.5
365B DG* 1.89 48.0 .81/.75 20.5/19.0
350 ES 3.07 78.0 .75 19.0
DG 1.75 44.5 .75 19.0
TG* 1.34 34.0 .61/.55 15.5/14.0
345B ES 2.81 71.5 .67 17.0
DG 1.93 49.0 .61 15.5
TG* 1.34 34.0 .61/.55 15.5/14.0
330 ES 2.81 71.5 .67 17.0
DG 1.93 49.0 .61 15.5
TG* 1.18 30.0 .51/.43 13.0/11.0
TG (HD) 1.34 34.0 .67 17.0
325, 320S ES 2.95 75.0 .59 15.0
DG 1.67 42.5 .55 14.0
TG* 1.1 28.0 .51/.43 13.0/11.0
TG (HD) 1.06 27.0 .59 15.0
324/323/322/321/320/319 ES 2.6 66.0 .55 14.0
DG 1.38 35.0 .51 13.0
TG* 1.02 26.0 .39/.33 10.0/8.5
TG (HD) 1.1 28.0 .49 12.5
318/317/315 TG* 1.02 26.0 .39/.33 10.0/8.5
TG (HD) 1.1 28.0 .49 12.5
314/313/312/311 TG 1.0 25.0 .37 9.50
308/307B/307 TG* .79 20.0 .37/.31 9.5/8.0
MS — Moderate Service SES — Super Extreme Service TG (HD) — Triple Grouser (Heavy Duty)
ES — Extreme Service DG — Double Grouser TG — Triple Grouser
* Two track shoe section offered (only plate thickness different)

601
 Product Information
TRACK HARDWARE

TRACK BOLTS

Function
• Hold the shoe on the link.
Requirements
• Wear resistant head.
Rolled Threads
• Tensile and shear strength.
Features
• Induction hardened heads.
• Rolled threads.
• Tensile strength exceeds Grade 8 specifications.
• Reusable
Induction Hardened Heads
Track bolt heads are induction hardened to protect them from deforming in high impact, highly abrasive conditions to
extend their wear life.

Rolled Threads
Rolled threads resist stripping better than cut threads. By rolling, the natural flow lines of the steel follow the thread
contours. Cutting threads cut the flow lines, making the threads weaker.

Strength
Caterpillar track bolts exceed Grade 8 strength requirements with a minimum tensile strength of 160,000 PSI.

TRACK NUTS
Function:
• Used with the track bolt to hold the shoe to the link.
Requirements
• Strength
• Retention on bolt.
Features Square Nut Design Mailbox Nut Design
• Furnace hardened and tempered.
• Self-locking.
Furnace hardened
Track nuts are thru-hardened and tempered to match or exceed bolt strength. Track nut core hardness is Rc30
minimum.

Self-locking
Track nuts are designed to fit into the nut seats in the link strap area. Broached grooves hold the nut so bolts can be
removed from the shoe.

602
 Product Information
TRACK HARDWARE

TRACK SHOE TIGHTENING PROCEDURE

To insure that track hardware is properly tightened, follow the procedure outlined below:
1. Remove paint from track link and pad mating surfaces.
2. Lubricate the bolt threads and bolt washer faces.*
3. Tighten the bolts to the specified torque.
4. Give each bolt an additional 1/3 turn.
* Requires 5P3931 anti-seize compound or 2P2506 thread lubricant.
Initial torque draws the parts together tightly. An additional 1/3 turn gives the bolt proper stretch for good retention.
Stretching stresses the bolt to insure that the bolt’s maximum clamping force is used. (See Split Master Link section
for split master link bolt tightening procedure.)

BOLT TORQUE CHART

Socket Size Bolt Diameter
Model inch mm inch mm Initial Torque*
D11R, D11N, 5130 2 1/16 — 1 3/8 — 1100 ± 50 ft. lbs. (1500 ± 70 Nm)
D10T, D10R D10N, D10 1 11/16 — 1 1/8 — 650 ± 50 ft. lbs. (870 ± 70 Nm)
D9T, D9R, D9N, D9L 1 1/2 — 1 — 650 ± 50 ft. lbs. (870 ± 70 Nm)
D9H, 245 1 1/2 — 1 — 400 ± 50 ft. lbs. (540 ± 70 Nm)
D8T, D8R, D8N, D8L 1 5/16 — 7/8 — 480 ± 50 ft. lbs. (650 ± 70 Nm)
D7R, D7H HD/RBT, D8K, 983, 235, 973 1 5/16 — 7/8 — 250 ± 50 ft. lbs. (340 ± 70 Nm)
517, 527, D7H, D6H, D5H HD/RBT, D7R, D6R, D6T,
D6M HD/RBT, D6N HD/RBT 1 1/8 — 3/4 — 300 ± 50 ft. lbs. (400 ± 70 Nm)
D7G, D6D, 977, 973, 963, 955, 235 1 1/8 — 3/4 — 220 ± 40 ft. lbs. (300 ± 50 Nm)
D5N, D5M, D5H, D5G, D5C, D5B, D4H, D4E,
953, 951, 943, 941, 215, 225, 213, 211, 205, 939 15/16 — 5/8 — 120 ± 30 ft. lbs. (170 ± 40 Nm)
D4G, D3G, D4C, D3C, D3, D4B, 931, 935, 213, 211, 205 7/8 — 9/16 — 65 ± 15 ft. lbs. (90 ± 20 Nm)
MS1600 — 50 — 33 650 ± 50 ft. lbs. (870 ± 70 Nm)
385B/5090 — 41 — 30 675 ± 70 ft. lbs. (900 ± 100 Nm)
375/5080, 365B — 41 — 27 410 ± 50 ft. lbs. (550 ± 70 Nm)
E650, MS650, MS580, 345B — 32 — 24 480 ± 50 ft. lbs. (650 ± 70 Nm)
350, 345B, 330, E450, MS580, MS450, MS380 — 32 22 370 ± 50 ft. lbs. (500 ± 70 Nm)
325, 324, 323, 322, 321, 320, 319, 318, 317, 315, E300,
E240, E200, 320S, MS300, MS280, MS240, MS230 — 30 — 20 300 ± 50 ft. lbs. (400 ± 70 Nm)
E180, MS180 — 27 — 18 190 ± 40 ft. lbs. (260 ± 50 Nm)
314, 313, 312, 311, E140, E120, E110, MS160,
MS140, MS120, MS110 — 24 — 16 130 ± 30 ft. lbs. (180 ± 40 Nm)
308, 307, MS90, MS70L — 22 — 14 70 ± 15 ft. lbs. (95 ± 20 Nm)
307, E070 3/4 1/2 165 ± 15 ft. lbs. (220 ± 20 Nm)
* Plus an Additional 1/3 Turn

SystemOne™ BOLT TORQUE CHART

Bolt Diameter
Model mm Initial Torque*
D6T/R/H, 963 22 370 ± 50 ft. lbs. (500 ± 70 Nm)
D6N/M, 953C/B, D5H 20 300 ± 50 ft. lbs. (400 ± 70 Nm)
D6K, D5N/M 18 220 ± 50 ft. lbs. (300 ± 50 Nm)
D5G/C, D4H 16 110 ± 30 ft. lbs. (145 ± 40 Nm)
D4G/C, D3G/C 16 110 ± 30 ft. lbs. (145 ± 40 Nm)
* Plus an Additional 1/3 Turn

603
 Product Information
TRACK ROLLERS

TRACK ROLLERS

Functions
• Support the machine on the track.
• Guide the machine along the track.
Requirements
• Strength — to resist structural failure before tread wear life is utilized.
• Shell tread wear life equal to links
• Shell tread and flanges rebuildable.
• Most internal components reusable.
• No maintenance during original tread wear life.
Features
• Shells forged from deep hardening steel and are designed to resist bellmouthing.
• Shafts and bearings are designed to reduce friction and wear and to provide maximum strength.
• Lifetime Lubricated for minimum maintenance.
• Bronzed Sleeve Bearing
• Sleeve design provides a large surface area for better load distribution.
• Inner diameter surface is polished to a smooth finish.
• Soft bronze coating in the bearing absorbs any small foreign particles before they can damage the shaft and seals.
• Duo-Cone Seal
• Seals oil in and abrasives out.
• The Duo-Cone Seal consists of two metal seal rings and two rubber toric rings. The toric rings provide the
proper pressure to both sides of the metal seal rings.
• Resists permanent deformation and temperature changes from -40° F (-40° C) to 225° F (107° C). Extreme
Temperature Seals respond over a wider temperature range from -60° F (-50° C) to 325° F (163° C) constant and
450° F (233° C) peak.
• Duo-Cone Seals are designed to last through several roller shell tread lives, depending on individual conditions.
For reusability guidelines, refer to SEBF8511 (Guidelines for Reusable Parts).
• Oil
• Caterpillar Lifetime Lubricated Track Rollers use a 30 weight oil, which cools and lubricates better than grease.
Caterpillar track-type tractors and loaders use both single and double flange rollers. Typically excavators use all single
flange rollers. Single flange rollers are used adjacent to the sprocket so they can be placed closer to the sprocket.
Double flanged rollers are used to maximize the guiding effect wherever space permits.
SystemOne™ TRACK ROLLERS
• Serviced at Roller Group level
• Single flange roller shell
• Forged from deep hardened steel and through hardened heat treated for internal strength to resist bellmouthing
and uniform hardened depth that provides wear life equal to link wear life
• Through hardened flanges to resist wear and prevent cracking or breakage
• Tall flange rollers for superior guiding
• Track Roller Shaft
• Forged and heat treated for strength
• Bearing surfaces are hardened and polished to reduce friction and wear
• End Caps
• Retain the roller shaft to the track roller frame and provides serviceability
• Not part of the roller group and serviced separately

604
 Product Information
TRACK ROLLERS

The unique characteristics of the four roller designs are as follows:

For D11R, D11N, D10, D10T, D10R, D10N, D9T, D9R, D9N, D9L, D8T, D8R, D8N, D8L
Track Roller Shell
• Forged from Deep Hardening Steel and heat treated for internal strength
to resist bellmouthing and to increase rebuildability.
• 2-piece roller shell rim
• Heat treated for a deep, uniform hardened depth that provides wear life
equal to link wear life.
• Thru-hardened flanges to resist bending and improve rebuildability.
• Steel-backed bronze bearings are press fit inside the shell.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Larger diameter for greater load bearing capacity.
Retainer
• Bolts to the ends of the track roller shells.
• Transmits side loads to the roller shaft and houses the Duo-Cone Seals.
End Caps
• End caps retain the roller shaft to bogies, and provide serviceability.
• End caps are serviced separately.

For D7R, D7H, D6R, D6H, D6N, D6M, D5H, D5N, D5M, D4H 973, 963, 953, 943
Track Roller Shell
• Forged from Deep Hardening Steel and heat treated for internal strength to resist
bellmouthing and to increase rebuildability.
• 2-piece roller shell rim
• Heat treated for a deep, uniform hardened depth that provides wear life equal to
link wear life.
• Thru-hardened flanges to resist bending and improve rebuildability.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Center flange absorbs side thrust from roller shell.
Cast Iron Bushing
• Supports the bronze sleeve bearing.
• Cast from iron to absorb loads without permanent deformation.
• Large lubricant reservoir to reduce heat build-up.
End Collar
• Attaches the track roller to the track roller frame.
• Houses and protects the outer Duo-Cone Seal.
Snap Ring Design
• Retain cast iron bushing.
• Eliminates need to use bolts to retain cast iron bushing.

605
 Product Information
TRACK ROLLERS

For Excavators
Track Roller Shell
• 2-piece roller shell rim.
• Forged from deep hardening steel and heat treated for internal strength to resist bellmouthing.
• Heat treated for a deep, uniform hardened depth that provides good wear life.
• A large oil reservoir is provided for in the shell and is filled through a threaded hole located between the wear
surfaces.
• Steel-backed bronze bearing is press fit inside the shell.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Large diameter for a greater load bearing capacity.
• Straight, solid shaft, with a hole in each end to provide positive attachment of the
end collar.
• Reduces end play growth.
End Collar
• Completely encircles the shaft to give added strength. Connected to the shaft by pins. Mounting surface area is
larger for improved bolt retention.

For Low Sprocket D9H, D8K, D7G, D6D, D5G, D5C, D5B, D4E, D4B,
D4G, D3G, D4C, D3C, D3 and 983, 977, 955, 951, 941, 939, 935, 933, 931
Track Roller Shell
• Forged from Deep Hardening Steel and heat treated for internal strength to
resist bellmouthing and to increase rebuildability.
• 2-piece roller shell rim.
• Heat treated for a deep, uniform hardened depth that provides wear life equal
to link wear life.
• Thru-hardened flanges to resist bending and improve rebuildability.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Center flange absorbs side thrust from roller shell.
Cast Iron Bushing
• Supports the bronze sleeve bearing.
• Cast from iron to absorb loads without permanent deformation.
• Large lubricant reservoir to reduce heat build-up.
End Collar
• Attaches the track roller to the track roller frame.
• Houses and protects the outer Duo-Cone Seal.

606
 Product Information
TRACK ROLLERS

Track Roller Sequence

Use the following charts to determine the original position of track rollers, identified by their flange type. The letter D
represents a Double flange roller and the letter S represents a Single flange roller.

ELEVATED SPROCKET MACHINES

Rollers
Model Per Side Roller Position
D11R/N*, D10T/R/N*, D10* 8 S S D D D D S S
D9T/R/N*, D9L 8 S S D D D D S S
D8T/R/N*, D8L* 8 S S D D D D S S
D7R/H STD & LGP 7 S D S D S D S
D7R/H XR 8 S D S D D S D S
D6T/R/H STD 6 S D S D S S
D6H XL & XR 7 S D S D S D S
D6T/R/H XW & XL 7 S D S D S D S
D6T/R/H LGP 8 S D S D D S D S
D6N/M XL, D5H TSK & XL 7 S D S D S D S
D5H STD 6 S D S S D S
D6N/M LGP, D5H LGP 8 S D S D D S D S
D5M D4H STD, D5N/M XL, D4H XL 7 S D S D S D S
D5M LGP, D4H LGP & TSK 7 S D S D S D S
D5N/M LGP, D4H LGP 8 S D S D D S D S
527 517 Skidders 7 S D S D S D S
527 517 Skidders 8 S D S D D S D S
572R, 561M, 561H 7 S D S D S D S
578 8 S S D D D D S S
583R 9 D D D D D D D D D
589 10 S S D D D D D D S S
* Machines with large diameter single flange rollers.

SystemOne™ Track Roller Sequence:

For elevated sprocket machines all rollers are single flange. Rollers per side are the same as in the table above.

607
 Product Information
TRACK ROLLERS

LOW SPROCKET TRACTORS AND LOADERS

Rollers Roller Position
Model Per Side F 2 3 4 5 6 7
D9G & H 7 D D S D S D S
D9D, E & G 7 D D S D S D S
D8H & K 7 D D S S D D S
D8H 6 D S D S D S
D8NC (8.00" Pitch) 7 D D S D S D S
D7E, F & G 6 D S D S D S
D7 LGP 7 D D S D S D S
D7NC (8.00" Pitch) 5 S D S D S
D6C & D 6 D S D S D S
D6B & D6NC 6 S D D D D S
D6 LGP 7 D D S D S D S
D6K 7 S S S S S S S
D5C 6 S D S S D S
D5 & D5B 6 S D D S D S
D5 LGP 7 S D D S D D S
D4G XL LGP, D5C XL LGP, D5G XL LGP 7 S D S D S D S
D4B, D4B LGP, D4C, D4C LGP 6 S D S S D S
D4D & E, LGP 5 D D S D S
D4NC 4 S D D S
D3, D3 LGP, D3B, D3C 5 S D S D S
D3B LGP, D3C LGP, D3G XL LGP 6 S D S S D S
D3 Special LGP 7 D D S S D S S
D2 4 S D D S
983 7 D D S D S D S
973 7 S D D S D D S
977E, H & K 7 D D S D S D S
977D & No. 6 7 S D D D D D S
955K, L & LGP, 963 6 S D D S D S
955H 6 S D D D D S
955F, E & C 5 D D S D S
953, 943 6 S D S S D S
951A 5 D S D S D
951B 5 S D S D S
951 LGP 5 S D S D S
941 incl. LGP, 933E & F 5 D D S D S
933C, 933*, 939 6 S D S S D S
931 incl. LGP, 935 5 S D S D S
* New design.

SystemOne™ Track Roller Sequence:

For low sprocket tractors and loaders all rollers are single flange. Rollers per side are the same as in the table above.

608
 Product Information
CARRIER ROLLERS

CARRIER ROLLERS

Functions
• Support the track as it moves between the sprocket and idler.
• Guide the track between the sprocket and idler.
Requirements
• Strength — to resist failure before tread wear life is utilized.
• Tread wear life matched to track links.
• Treads and flanges rebuildable on forged shells
Carrier Roller Group
• Most internal components reusable.
• No maintenance required during tread wear life.

CARRIER ROLLER SHELL

Carrier rollers have shells forged from Deep Hardening Steel for strength, wear life and rebuildability.

Caterpillar carrier rollers used Duo-Cone Seals for maintenance free operation.

Features
• Heat treated shells for body strength and long wear life.
• Shaft and bearings designed to carry and turn with heavy track weight.
• Lifetime Lubricated for minimum maintenance.
Note
D8T and larger track-type tractors use a single flange track roller group as the carrier roller.

609
 Product Information
IDLERS

IDLER ASSEMBLY

Functions
• Guide the track in and out of the track rollers.
• Intermittently support the machine’s weight.
• Provide a way to control track slack and tension.
Requirements
• Strength to resist failure before tread wear life is utilized.
• Tread wear life equal to or greater than link wear life to service limits.
• Treads and center flanges rebuildable.
• No lubricant maintenance during original tread wear life.
Features
• Tread hardness similar to links, track rollers and carrier rollers for impact strength and balanced wear life.
• Lifetime Lubricated for minimum maintenance.
• Rebuildable tread.
Caterpillar offers cast, forged, and fabricated idler designs. The cast idler designs are hollow and single web. The
fabricated idler designs are straight side plate and curved side plate, each using a rolled tread and flange section.
Internal reinforcing plates provide added strength.

All Caterpillar idlers have Duo-Cone Seals for Lifetime Lubrication. The idler needs no oil addition until it is rebuilt
or replaced at wear limits. Idler treads may be rebuilt several times. Internal idler components, such as shaft and
bearings are generally reusable.

Straight Side Plate Curved Side Plate Center Tread Idler (CTI) Typical Cast/Forged Idler Cast Idler

Fabricated Idlers

IDLER TYPES

Model Type Model Type

D11R/N Cast D5G, D5C, 939 Forged
D10T/R/N Cast D5B, 225 Fabricated
D10 Cast D5N, D5M, D4H Cast & Fabricated
D9T/R/N Cast D4E, 215 Fabricated
D9L Cast D3G, D4G, D3, D4B, D4C Forged
D9H Fabricated 983 Fabricated
D8T/R/N Cast 977 Fabricated
D8L Cast 973 Fabricated
245 Cast 963 Fabricated
D8K, 245 Fabricated 955 Fabricated
D7R/H Cast & Fabricated 951 Fabricated
D7G, 235 Fabricated 953 Fabricated
D6T/R/H Fabricated 943 Fabricated
D6D, 227 Fabricated 941 Fabricated
D6N, D6M, D5H Fabricated 931, 933, 935 Forged
D6K Sprocketed All Center Tread Idlers (CTI) Cast

610
Product Information
GUARDS

611
Product Information
PROPER TRACK SAG

PROPER TRACK SAG – MACHINES WITHOUT CARRIER ROLLERS

Model Inches mm
D11R, D11N, D10 6.5" ± .40" (165 mm ± 10 mm)
D10T, D10R, D10N, D9L, 589 6.1" ± .40" (155 mm ± 10 mm)
D9T, D9R, D9N 5.1" ± .40" (130 mm ± 10 mm)
D8T, D8R, D8N, 578, 583 T/R 4.5" ± .40" (115 mm ± 10 mm)
D8L 5.5" ± .40" (140 mm ± 10 mm)
D7R, D7H LGP, 527R 5.0" ± .40" (127 mm ± 10 mm)
D7R, D7H, D6T, D6R, D6H, 527 4.5" ± .40" (115 mm ± 10 mm)
517, D5H, D4H, 561M/H 3.9" ± .40" (100 mm ± 10 mm)

PROPER TRACK SAG – MACHINES WITH CARRIER ROLLERS

Model Inches mm
D11R, D11N, D10 3.0" ± .40" (75 mm ± 10 mm)
D10T, D10R, D10N, D9L, 589 2.8" ± .40" (70 mm ± 10 mm)
D9T, D9R, D9N 2.6" ± .40" (65 mm ± 10 mm)
D8T, D8R, D8N, 578, 583T/R 2.6" ± .40" (65 mm ± 10 mm)
D8L 2.6" ± .40" (65 mm ± 10 mm)
D7R, D7H, D7R/D7H LGP, 572R 2.6" ± .40" (65 mm ± 10 mm)
D6T, D6R, D6H, 527 2.2" ± .40" (55 mm ± 10 mm)
D6N, D6M, D5H, D6N/D6M/D5H LGP, 517 2.2" ± .40" (55 mm ± 10 mm)
D5N, D5M, D4H, 561M/H 1.4" ± .40" (35 mm ± 10 mm)

PROPER TRACK SAG – HYDRAULIC EXCAVATORS

Inches mm
Model Min Target Max Min Target Max
All 200-Family series excavators 1.0 1.3 1.5 25.0 32.5 40.0
All E-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.0
All 300-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.0
5080, 5090B, 5130, 5130B, 5110B 1.6 1.85 2.1 40.0 47.5 55.0

PROPER TRACK SAG –

SystemOne™ MACHINES WITH CARRIER ROLLERS*

Inches mm
Model Min Target Max Min Target Max
D6T/R/H, D6N/M, D5H 1.6 1.80 2.0 40 45 50
D5N/M, D4H 1.0 1.40 1.8 25 35 45
* If excessive track jumping occurs, run the track adjustment to the minimum side of track sag range, and/or change
or upgrade to new recoil spring.

612
 Product Information
TRACK ROLLER FRAME EXTENSION

Track Roller Frame Extension Specifications

Machines with and without carrier rollers

Maximum Length of Exposed Tube

Model (Serial Number Range) Inches mm
D11R (AAF) (7PZ) (9TR00202-UP) 7.8" (198 mm)
(9XR00154-UP)
D11R, D11N 7.0" (178 mm)
D10T (RJG), D10R (AKT) 7.3" (186 mm)
(3KR1331-UP), D10
D10N (2YD1-515)) 5.8" (148 mm)
D10R (3KR1-1330), D10N (2YD516-UP) 6.8" (173 mm)
D9T (RJS), D9R (ACL) (ABK) 7.0" (178 mm)
(8BL1422-UP) (7TL1212-UP)
D9R (8BL1-1421) (7TL1-1211), D9N) 5.9" (150 mm)
D9L, D8L, 589 6.5" (165 mm)
D8R (7XM1-5093), D8N (9TC) (5TJ) 5.6" (142 mm)
D8T D8R, 583T/R (7XM5094-UP) 6.0" (152 mm)
(6YZ) (KPZ)
D8N, 578 (9TC) (5TC) 5.6" (142 mm)
D7R - STD, XR 5.4" (136.5 mm)
D7R - LGP 572R 5.4" (136.5 mm)
D7H - STD, XR 5.0" (127 mm)
D7H - LGP 5.0" (127 mm)
D6T - STD 5.8" (147.5 mm)
D6T - XL/XW/IG 5.7" (144.2 mm)
D6T - LGP 5.6" (142.5 mm)
D6R - STD (2YN1-544) (3ZN1-763) 6.2" (156.8 mm)
D6R - STD (2YN545 & UP) 5.8" (147.5 mm)
(3ZN764 & UP) (AFM) (AEM)
D6R - XR (6JN1-415) (7KN1-450) 6.2" (156.8 mm)
D6R - XR (6JN416& UP) (7KN451 & UP) 5.8" (147.5 mm)
D6R - LGP (8LN1-528) (9PN1-1578) 6.0" (151.8 mm)
D6R - LGP (8LN529 & UP) 5.6" (142.5 mm)
(9PN1579 & UP) (ACJ) (ADE)
D6R - XL (4MN1-503) (5LN1-2765) 6.0" (153.5 mm)
D6R - XL (4MN504 & UP) (5LN2766 & UP) 5.7" (144.2 mm)
D6R - XW 5.7" (144.2 mm)
D6H - STD, XR 6.4" (161.8 mm)
D6H - LGP, 527 6.2" (156.8 mm)
D6H - XL 6.0" (153.5 mm)
D6M/N - XL 4.0" (102.4 mm)
D6M/N - LGP 4.3" (108.2 mm)
D5M/N - XL 3.6" (91.7 mm)
D5M/N - LGP 3.5" (88.5 mm)
D5H, 517 4.4" (112 mm)
D4H, 561H/M 3.9" (100 mm)

613
614
 Conversion Guide
INDEX

Conversion Guide
MODELS PAGE NO.

DETERMINING COMPETITIVE UNDERCARRAIGE CONVERSIONS.................. 616

LINK ASSEMBLY.................................................................................................... 617
TRACK SHOE......................................................................................................... 620
SPROCKET.............................................................................................................621
TRACK ROLLERS.................................................................................................. 623
CARRIER ROLLERS.............................................................................................. 626
IDLERS................................................................................................................... 627

615
 Conversion Guide
DETERMINING COMPETITIVE UNDERCARRAIGE CONVERSIONS

DETERMINING COMPETITIVE UNDERCARRIAGE CONVERSIONS

To identify which Cat components can be used, and if modifications are required, to convert any track type
machine to Cat undercarriage components, refer to the following guidelines:

• Refer to guidelines on the following pages to determine what dimensions should be collected on the
competitive machine to make a complete or partial conversion to Cat undercarriage.

• Use Conversion Report Form/Work Sheet PEEP0210, to collect dimensional data.

• Refer to IRM UC96-12, titled "Caterpillar Undercarriage Components Dimension Guide". This guide provides
information to compare the dimensions of the competitive undercarriage with Caterpillar undercarriage
components for conversion purposes.

616
 Conversion Guide
LINK ASSEMBLY

LINK ASSEMBLY
Primary Dimensions
Pitch — A A
F
Bushing O.D. — B
Rail Spread
Inside — C
Outside — D B E
G H
Secondary Dimensions
Link Height — E C
Pin Length — F D
I
Rail to Pin Boss — G
Rail to Bushing — H
Bolt Size — I
Other Considerations
Number of Sections

PRIMARY DIMENSIONS
The primary dimensions are the critical dimensions to determine if a Cat
link assembly can be used with the OEM sprocket and/or OEM rolling
components. Compare measurements to Cat link assembly dimensions,
refer to IRM UC96-12. If measurements are within the ranges shown then
the Cat link assembly may be used with the OEM sprocket and/or rollers.
If measurements and Cat link dimensions are different, or conversion to
Cat sprockets and/or rollers is desired, sprocket and/or roller
measurements must also be taken.

Pitch — A A
Purpose: Determines OEM sprocket compatibility with Cat track.
Range: ±.03" (.76 mm)
Method: Track pitch (A) is the distance between pin centers in adjacent
track sections. Track pitch can be determined by measuring the
distance from one side of the pin to the same side of the pin in
the adjacent section.
When measuring to determine OEM pitch on worn link
assemblies, you will need to adjust for an increase in track pitch
due to internal wear.

617
 Conversion Guide
LINK ASSEMBLY

Bushing Outer Diameter (O.D.) — B

Purpose: Determines OEM sprocket compatibility with Cat track.
Range: -.12" (3.04 mm) without modifications
±.12" (3.04 mm) with modifications B

Method: The bushing outer diameter measurement should be taken

across the unworn horizontal centerline of the bushing.
In cases where the competitive track bushing is of smaller
diameter than the Cat track bushing, and where the competitive
sprocket must be used, the new competitive sprocket root
should be ground out to properly accommodate the larger
diameter bushing. This grinding should be done with the
sprocket held in a fixture to achieve uniform profile and pitch.
Failure to grind out the difference in radius can result in
mismatch and accelerated bushing wear. Normal break-in .06" (1.50 mm)
cannot be expected to relieve the difference without some
detrimental wear.

Rail Spread
Inside — C
Outside — D

Purpose: Determines OEM rolling component compatibility with OEM

Cat track.
Range: Inner — .0" to +.19" (4.83 mm)
Outer — -.19" (4.83 mm) to +.0" C
D

Method: The inside and outside rail spreads can be measured as shown
at below. CAT
Note: As link assemblies wear, there will be a slight change of
rail spread. It does not significantly affect measured
dimensions.Y

OEM

618
 Conversion Guide
LINK ASSEMBLY

SECONDARY DIMENSIONS
The secondary dimensions are less critical. Although they rarely prevent a conversion, modifications may be
necessary in order to protect a complete Caterpillar undercarriage system.

E
G H

C
D
I

Link Height — E
Purpose: Determines if machine height will be raised or lowered and affects number of sections required.

Pin Length — F
Purpose: Determines if pin will clear guards or other machine parts.

Rail to Pin Boss — G

Purpose: Determines material available for wear.

Rail to Bushing — H
Purpose: Determines if link will clear idler, roller flanges, and provide maximum wear material without sacrificing
guidability, number of sections required.

Bolt Size — I
Purpose: Bolt sizes need to be equivalent to ensure use of competitive shoe and proper fastener strength.

OTHER CONSIDERATIONS
Number of Sections
The number of Cat track sections required should be determined from the number used on the competitive machine at
the time of conversion.

Assuming the sprockets and rolling components maintain relatively constant placement and sizes, the following
procedure is usually accurate enough to determine the number of Cat sections required.

OEM Pitch (New) x No. Sections Currently

No. Sections of Cat =
Cat Pitch

Example: Calculations for converting a competitive 7.50" pitch 36-section machine to Caterpillar 8.00" pitch track
are as follows:

7.50" x 36 = 270 total inches of chain required on this machine. 270" ÷ 8.00" or 33.75 or 34 sections of Caterpillar 8.00"
pitch track required for conversion.

If link height and/or rail to pin boss clearance increases a large amount, the preceding formula may lead to a link
assembly that is too short.

619
 Conversion Guide
TRACK SHOE

TRACK SHOE
A
Primary Dimensions
Bolt Hole Spacing — A
— B
— C
D B
Bolt Size — D

Bolt Hole Spacing — A, B, C

Purpose: Determines interchangeability of track shoes. C
Range: .0"
Method: There are two methods of measuring shoe bolt spacing:
1. Measure a track shoe, by measuring from one side of a bolt hole to the same point of the hole adjacent
2. Measure an assembled track group, by measuring from the center of the bolt head to the center of the
adjacent bolt

Bolt Size — D
Purpose: Determines reuse of track shoes and/or track hardware.
Range: .0"

Other Considerations
The shoe leading and trailing edges must maintain proper clearance, especially if link pitch changes, to allow proper
assembly and operation.

620
 Conversion Guide
SPROCKET

SPROCKET
Primary Dimensions
Tip Diameter — A
Root Diameter — B
Inner Diameter — C
Other Considerations
Offset
Segment Hardware

PRIMARY DIMENSIONS
Use these dimensions to determine if a Caterpillar sprocket can be used on the competitive machine.
Tip Diameter — A
Purpose: Determines if machine interference will result from using Cat sprocket.
Range: Not Specified
Method: Measure the overall diameter of the sprocket. It may be helpful to mark the center of the hub or axle.
Then, using a 12" ruler extended from the tooth tip measure to the hub center with a tape measure.
The most accurate sprocket measurements can be obtained after the track has been removed from the
machine. Either too large or too small tip diameter can result in track or sprocket interference with other
machine components.

Root Diameter — B
Purpose: Determines if sprocket will carry machine weight.

Range: Not Specified A C B

Method: Measure the diameter of the (estimated) unworn sprocket roots. The
track bushings must increase elevation such that at the six o’clock
sprocket position the bushing is above the level that it left the last
roller.

It may be necessary to use spacer plates on the competitive track roller frame to increase ground clearance
when using a larger diameter Cat sprocket. This should lift the track roller frame at the bottom entry
position. Spacers may be fabricated from 1030 or 1020 steel. Full length spacer plates are recommended
and bolts should be checked for tightness at regular intervals.

SPACER PLATE

Inner Diameter — C
Purpose: Determines if there is adequate space and geometry for welding.
Range: Not Specified

Method: Measure the area that will facilitate welding. Use same procedure described above.

621
 Conversion Guide
SPROCKET

OTHER CONSIDERATIONS
Offset
The Caterpillar rim or adapter ring and segments may have a different offset than the OEM design. Failure to
compensate for the offset will result in sprocket-link interference.
Whether you use an adapter ring or a weld-on rim, the inner diameter must allow proper mounting and orientation on
the competitive sprocket “hub.”
When welding, the sprocket teeth must be in line with the track roller center line and the rim or segments must be
clear of all other parts.

CUT 1/2" LARGER

THAN INNER DIAMETER WELD
OF WELD ON ADAPTER CATERPILLAR
WELD ON ADAPTER

TAPER
WELD

OEM
SPROCKET HUB

HUB

WELD ADAPTER
TAPER

OFFSET ON THE HUB TO

CENTER SEGMENTS
CUT 1/2" WELD WITH ROLLER
LARGER

SEGMENTS

Segment Hardware
Any additional clearances needed for segment hardware must be considered, especially if the sprocket runs close to
final drive housings, guards, etc.

622
 Conversion Guide
TRACK ROLLERS

TRACK ROLLERS
Primary Dimensions E G

Tread Diameter — A
Tread
Inside — C A

Outside — D
I B
Mounting Width — E
Roller Frame to Tread Surface — I
Width Between Bolt Centers — F C H
Bolt Hole Spacing — H D

F
Other Considerations
Flange Diameter — B
Bolt Size — G
Roller Spacing

PRIMARY DIMENSIONS
Use these dimensions to determine if Caterpillar link assemblies will fit on the
competitive track rollers.
Tread
Inside — C CAT
Outside — D
C
Purpose: Determines Cat link assembly compatibility with OEM track rollers. D
Range: Outside — .0" to +.19" (4.83 mm)
Inside — .19" (4.83 mm) to +.0"
OEM
Method: Measure from inside flange to inside flange and outside flange to
outside flange. Measurements from worn rollers will result in slightly
inaccurate dimensions. If clearances appear to be close compensation
for wear may be needed. Note: Be sure to compare these
measurements to the link assembly intended for use in the
conversion.

623
 Conversion Guide
TRACK ROLLERS

Use these dimensions to determine if Caterpillar track rollers can be used on the
competitive machine. OEM ROLLER
FRAME

Mounting Width — E
Purpose: Determines if Cat rollers will fit in OEM frame.
Range: -.10" (2.54 mm) to +.0" (.0 mm) E
Method: Measure the OEM track roller frame and compare to Dimension E on
the Cat roller.
Note: Failure to maintain a clearance between the roller frame and CAT
roller end collar vertical faces may cause roller damage.

Roller Frame to Tread Surface — I

Purpose: Determines if Cat roller lowers or raises machine.
Range: Depends on roller wear limits, idler and sprocket placement.
Method: Differences in tread diameter or end collar design can result in slightly
raising or lowering overall height of machine. This can cause track
interference with frame, guards or cause sprocket to carry some machine
weight. Frame to tread surface (Dimension I) should be measured and CAT
any potential interference compensated for as necessary on a case by
I
case basis. If required, roller frame spacers can be used.

624
 Conversion Guide
TRACK ROLLERS

Width of Bolt Centers — F

Bolt Spacing — H
Purpose: To determine use of existing bolt pattern.
Range: ±.01" (.254 mm)
Method: Measure from the center to center point of bolts in track roller
frame. For comparison, use Caterpillar dimensions as reference.
If patterns are not within range, plugging, drilling, and tapping
of the competitive roller frame may be needed.
F

OTHER CONSIDERATIONS

Flange Outer Diameter

Two points to check are (1) roller flange to link pin boss clearance, and (2)
roller flange and track frame interference. H

Bolt Size
If bolt size and tread type are similar, reuse of competitive hardware may
be possible.

Roller Spacing
If the Cat roller selected has different tread, flange diameters and/or roller
frame to tread surface dimensions, be sure to compensate for these to
prevent idler/sprocket interference, especially on the front and rear roller.

Shaft and End Collar Design

(flat shaft mounting vs. round shaft mounting)
For example, Cat D8 and D9 size track rollers utilize a full round shaft
mounting which requires a saddle type cutout in the roller frame
(Illustration B). D8 size roller conversion can use 983 rollers which do
mount flat as in Illustration A. However, D9 roller conversion will require
a roller frame saddle arrangement.

ROLLER FRAME ROLLER FRAME

SIMILAR TO CAT
D8 & D9
FULL ROUND SHAFT FLAT SHAFT

ILLUSTRATION B ILLUSTRATION A

625
 Conversion Guide
CARRIER ROLLERS

CARRIER ROLLERS
A D
Primary Dimensions
Tread Inside — A
Tread Outside — B
Shaft Outer Diameter — C C
Reference Dimension — D

Other Considerations
Shaft Mounting Length — E B E
Dowel
Spacing
Size

PRIMARY DIMENSIONS
Use these dimensions to determine if Caterpillar link assemblies can be used on the competitive carrier roller.
Tread
Inside — A
Outside — B

Purpose: Determines link assembly compatibility with carrier rollers.

Range: Inside — .19" (4.83 mm) to +.0"
Outside — .0" to +.19" (4.83 mm)
Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from worn
rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensation for wear
may be needed. Note: Be sure to compare these measurements to the link assembly intended for use in the
conversion.
Use these dimensions to determine if Caterpillar carrier rollers can be used on the competitive machine.

Shaft Outer Diameter — C

Purpose: Determines compatibility of Cat roller shaft with competitive carrier roller holder.
Range: As small as competitive roller holder will hold. As large as competitive roller shafts.
Method: Measure competitive shaft with calipers, compare to Cat roller; if Cat roller is smaller, a sleeve may be
fabricated to compensate for small diameter.
Reference Dimensions — D
Purpose: Determines compatibility of Cat carrier roller with competitive carrier roller holder and link assembly.
Range: ±.10" (2.54 mm) depends on tread inside and competitive holders.
Method: Measure from radius to holder to determine reference dimension. The reference dimensions assure proper
carrier roller alignment with the link assembly.

OTHER CONSIDERATIONS
Shaft Mounting Length — E
The Cat carrier roller shaft may have a longer or shorter shaft mounting length, providing it does not interfere with
the holder or other components.
Dowel Spacing and Size
The dowel spacing and size may need to be moved or resized; many times this is accomplished by drilling new holes
in the competitive holder.

626
 Conversion Guide
IDLERS

IDLER
Primary Dimensions
Tread Diameter — A
Tread Inside — B D
TreadOutside — C
Mounting Shaft Diameter — D

Other Considerations
A
Slide Plate Profile

B
C

PRIMARY DIMENSIONS
Use these dimensions to determine if Caterpillar link assemblies can be used on the competitive idlers.

Tread Diameter — A

Purpose: Determines link assembly compatibility with idler.

Range: Slightly smaller than OEM up to OEM diameter.
Method: Measure the diameter; compensate for wear as much as possible.
Tread
Inside — B
Outside — C

Purpose: Determines link assembly compatibility with idler.

Range: Inside — .19" (4.83 mm) to +.0"
Outside — .0" to +.19" (4.83 mm)
Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from worn
rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensation for wear
may be needed. Note: Be sure to compare these measurements to the link assembly intended for use in the
conversion.
Use these dimensions to determine if Caterpillar carrier rollers can be used on the competitive machine.

Mounting Shaft — D

Purpose: Determines use of OEM mounting block.

Range: Same shaft O.D., same mounting arrangement.
Method: Compare Cat shaft O.D., length and mounting type with competitive idler. Modification to OEM mounting
block may permit use of Cat idler.

OTHER CONSIDERATIONS
Side Plate Profile
Some manufacturers use guards that run close to idler side plates; modification may be needed to avoid interference.

627
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
031-0221 328, 330, 451, 506 106-1630 37, 38, 44, 202, 203, 226, 107-4889 121, 122, 123, 124, 125,
229, 469 126, 127, 128, 155, 164,
031-1382 199 176, 178
106-1634 37
031-3185 197 107-5715 58
106-1635 38, 469
034-0707 162 107-5716 58
106-1636 37, 44
053-2294 13, 14, 15, 17, 18, 47, 50, 107-5721 61, 238
220, 232, 295 106-1637 38
107-5888 57
102-3585 290, 434 106-1638 202, 203, 226, 229
107-5889 57
102-3587 290, 434 106-1642 37, 38, 39, 40, 44, 202,
203, 226, 229, 469, 470, 107-8040 175
102-5920 284, 431 512
107-8084 155, 164
102-5921 284, 431 106-1646 38
107-8085 155, 164
102-6680 168 106-4370 54, 55, 237
107-9616 186
102-6683 190 106-4371 54, 55, 237
107-9620 184
102-6685 162 106-4372 55, 236, 237
108-0041 130, 131, 132
102-9920 281, 282 106-4373 55, 236, 237
108-0809 56, 57, 58
104-3494 178 106-4402 55, 236, 237
108-0812 61
104-4122 430, 431 106-7691 76, 80, 81, 82, 83, 84, 85,
87, 204, 212, 231 108-0943 6, 216
104-4129 431
106-8235 71, 210 108-0944 6, 216
104-4130 431
106-8237 71, 210 108-0946 12, 219
104-8576 178
106-9187 252, 253, 254, 426 108-0947 6, 11, 216, 218
104-8577 178
106-9563 58 108-0948 6, 11, 216, 218
105-0929 310, 441
106-9564 58 108-0949 6, 7, 216, 289, 434
105-0930 310, 441
106-9982 61, 237 108-0950 6, 7, 216, 289, 434
105-4125 302
107-0707 230 108-0951 6, 216
106-1602 45
107-0708 230 108-0952 6, 216
106-1603 45
107-0709 230 108-0953 6
106-1604 45
107-0710 230 108-0954 6, 11, 216, 218
106-1605 45
107-0713 45 108-0955 6
106-1607 45, 203, 230
107-0714 45 108-1136 13, 14, 17, 18, 47, 50
106-1608 45, 230
107-0715 45 108-1138 13, 14, 16, 17, 18, 47, 50
106-1609 230
107-0716 45 108-1578 284
106-1610 44, 203, 229
107-0717 37 108-1579 284
106-1611 45
107-0718 37 108-2622 6
106-1612 45
107-0719 37, 38, 39, 40, 44, 202, 108-2625 7
106-1613 45, 203, 230
203, 226, 229, 469, 470 108-2639 11, 218
106-1615 45
107-0720 44, 203, 229 108-2640 11, 218
106-1616 45
107-2631 236 108-3297 223
106-1617 45, 230
107-2632 236 108-3298 223
106-1618 37, 38, 202, 226, 469
107-2644 206, 223, 236, 237 108-3302 223
106-1622 46, 203
107-2645 206, 223, 236, 237 108-3303 223
106-1624 46, 203
107-3944 178 108-3990 25
106-1625 37, 38, 44, 202, 203, 226,
229, 469 107-3945 76, 80, 81, 82, 83, 85, 87, 108-3995 25
121, 122, 123, 124, 129,
106-1626 37, 38, 44, 202, 203, 226, 130, 155, 164, 178, 212 108-3998 25
229, 469
107-3946 150, 151, 152, 163, 175 108-4002 25
106-1627 37, 38, 39, 40, 44, 202,
203, 226, 229, 469, 470 107-3947 150, 151, 152, 163, 175, 108-4016 27, 29, 30
186
106-1628 37, 38, 39, 40, 44, 202, 108-4017 27, 29, 30
203, 226, 229, 469, 470 107-4057 150, 151, 152, 153, 163, 108-4018 29
175, 176, 186
106-1629 37, 38, 44, 202, 203, 226, 108-4020 29
229, 469 107-4888 153
108-4022 33, 225

628
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
108-4030 27, 29 115-3330 45, 230 118-1628 135, 386, 387, 539, 540,
542, 563, 564
108-4031 27, 29 115-3331 45, 230
118-1630 386, 542
108-4033 27, 30 115-4923 114
118-1631 386, 542
108-4036 27, 30 115-4924 114
118-1632 342, 465
108-4250 25 115-6301 114
118-1633 342, 465
109-0058 23 115-6302 114
118-1634 366, 503
109-0059 23 115-6303 114
118-1635 366, 503
109-0060 23 115-6307 115
118-1636 386, 563
109-0061 23 115-6308 115
118-1637 386, 563
109-0478 289, 434 115-6310 115
118-3539 435
109-0486 289, 434 115-6312 115
119-0603 230
109-0487 289, 434 115-6314 115
119-0604 230
109-0488 289, 434 115-6315 119
120-5753 90, 213, 520
109-0489 289, 434 115-7462 119
120-5767 90, 213, 520
109-0885 292, 293 116-6698 90, 213, 520
120-5785 90, 213, 520
109-1708 223 116-6702 90, 366, 367, 503, 520, 522
120-5804 90, 213, 520
109-1709 223 116-8145 114
121-0824 52, 234, 481
109-3229 54 116-8545 74
121-0825 52, 205, 233, 234, 481
109-3230 54 116-8548 74
121-0827 52, 234, 481
109-8014 169, 184 117-0519 230
121-0828 52, 205, 233, 234, 481
110-0771 106, 107 117-0520 230
121-0830 52, 234, 481
110-2976 37 117-0615 45, 203, 230
121-0831 52, 233, 234, 481
110-2978 37 117-0616 45, 203, 230
121-0834 52, 205, 233, 234, 481
110-3362 46, 47, 50, 232 117-0756 119
121-1257 52, 205, 233, 234, 481
110-6968 26, 27, 28 117-1020 347
121-1258 135, 539, 540
110-6969 55, 56, 57 117-1022 352, 494
121-5907 174
111-0423 142 117-1023 510
122-0216 367
111-0428 139, 140, 142 117-1024 375, 586
122-0217 367
111-0429 139, 140, 142 117-1027 375
123-1186 572
111-0431 142 117-1616 359
123-1188 572
111-0437 139 117-1617 359, 584
123-1190 572
111-0443 140 117-9748 90, 213, 520
123-1191 572
111-0446 140 118-1608 327, 450, 458
123-8064 114
111-1522 243, 419 118-1609 327, 450, 458
124-8237 20, 21, 221, 297, 438, 456
111-1729 150, 151 118-1610 327, 450, 458
124-8238 20, 21, 221, 297, 438, 456
111-1730 150, 152, 163 118-1611 342, 368, 465, 504, 581
124-8240 20, 21, 221, 297, 438, 456
112-8136 472 118-1612 342, 368, 465, 504, 581
124-8241 20, 21, 221, 297, 438, 456
112-8139 472 118-1613 342, 368, 465, 504
124-8243 20, 21, 221, 297, 438, 456
112-8980 434 118-1614 367, 503, 585
124-8244 20, 21, 221, 297, 438, 456
115-1145 190 118-1615 367, 503, 585
124-8248 20, 21, 221, 297, 438, 456
115-1147 162 118-1616 327, 450, 458
124-8251 135, 539, 540
115-1176 168 118-1617 366, 522, 585
124-8255 135, 539, 540
115-1385 148, 162 118-1618 366, 522, 585
124-8259 135, 540
115-2438 6, 216 118-1619 387, 564, 588
124-8262 135, 540
115-2439 37, 38, 202, 226, 469 118-1620 387, 564
124-8267 135, 539, 540
115-2440 66, 208, 353 118-1623 386, 542, 563, 588
125-3537 184
115-3328 45, 230 118-1625 386, 542, 563, 588
125-4655 175
115-3329 45, 230

629
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
125-5163 74 131-1911 271 134-6403 103, 105
125-5167 74 131-2466 271 134-6404 103, 105
125-9087 120, 535 131-3932 122, 124, 130 134-6638 539
125-9088 120, 535 131-3935 121, 122, 123, 124, 125, 134-9431 103, 105
126, 127, 128, 129, 130
126-5343 193, 195 134-9432 103, 105
131-4835 119
127-0103 206, 207, 214, 215 134-9434 102, 104
131-5311 120
127-0964 119 134-9435 102, 104
131-7239 20, 21, 221, 297, 438, 456
127-6254 230 134-9929 102, 104
131-8207 121, 122, 123, 124, 125,
127-6255 230 126, 127, 128 134-9930 102, 104
127-7009 74, 513 131-8742 52, 205, 233, 234, 481 136-6713 147
128-5604 114 131-9352 52, 233, 234, 481 136-9349 233
128-7743 535 132-1334 45 137-3301 312
128-7744 535 132-1336 45 137-3384 190
128-8829 572 132-1951 20, 21, 221, 297, 438, 456 137-9518 13, 14, 15, 17, 18, 220
128-9473 268, 429 132-3829 301, 440 138-1721 213
128-9474 268, 429 132-3830 301, 440 138-1725 212
128-9545 268, 270, 429 132-3831 263, 300, 301, 440 138-1726 212
128-9546 268, 270, 429 132-3832 263, 300, 301, 440 138-1934 305, 441
128-9555 266, 267, 268, 269, 270, 132-3849 301, 440 138-1935 305, 441
271, 429
132-3861 263, 300, 301, 440 138-1936 274, 429
128-9693 184
132-4676 301, 440 138-1937 274, 429
129-2977 233
132-4677 301, 440 138-1945 274, 275, 305, 306, 429,
129-2978 233 441
132-4912 301
129-5029 539 138-1946 274, 275, 276, 304, 305,
132-6615 268, 270, 271, 272, 429 306, 429, 441
129-5030 539
132-6622 268, 270, 271, 272, 429 138-4330 190
129-5036 98
132-6625 301, 440 138-4331 197
129-5037 98
133-0246 210 138-5773 67
129-9204 119
133-0247 210 138-5774 74
130-1428 265, 266, 267, 268, 269,
270, 271, 429 133-0248 210 138-7761 158
130-1433 266, 267, 268, 269, 270, 133-0249 210 138-7762 158
429
133-0250 210 138-7763 158
130-1437 265, 266, 267, 268, 269,
270, 271, 429 133-0251 210 138-9378 175

130-5641 181 133-0252 210 138-9692 274

130-7786 214 133-0253 210 138-9693 274

130-7787 214 133-2890 74 138-9694 275

130-7788 214 133-9599 270, 271 138-9695 275

130-7789 214 133-9600 270, 271 138-9696 306

130-7790 214 133-9601 272 138-9697 306

130-7791 214 134-5364 102, 104 138-9712 150, 152, 157, 163

130-7794 214 134-5365 102, 104 139-0617 174

131-1568 271, 272 134-5366 99, 100, 101, 102, 103, 139-2011 200
104, 105, 112
131-1569 271, 272 139-2015 200
134-5368 99, 100, 101, 102, 103,
131-1647 121, 122, 123, 124, 125, 104, 105, 112 139-2016 200
126, 127, 128, 130, 131, 139-2019 200
132, 133 134-6091 214
134-6092 214 139-9015 524, 525, 526
131-1649 169, 191
134-6093 206, 207, 214, 215 139-9016 524, 525, 526
131-1650 157, 163, 170, 186
134-6094 214, 215 139-9019 525
131-1651 153, 155, 156, 164, 178
139-9020 525

630
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
140-0291 169 152-3421 77, 78, 80, 81, 82, 83, 84, 154-3656 315
85, 212
142-1365 353 154-3657 315
152-7146 304, 305
142-2803 169, 184 154-3659 331, 334, 354, 355, 460,
152-7182 262, 302, 439 462, 471, 495, 553
142-2805 184
152-7183 262, 302, 439 154-3660 240, 243, 245, 418, 419,
143-0746 188, 189 421, 576
152-8038 7
144-8092 271 154-3661 452
152-8039 7
144-8093 271 154-3662 334, 462
152-8040 7
144-8094 271 154-3664 10, 217, 290, 315, 442,
152-8041 39 452, 453
144-8095 271
152-8043 39 154-3667 495, 579
145-5181 272, 273, 303, 304
152-8044 40, 470 154-3672 331, 355, 460, 495, 579
145-7132 57
152-8045 40 154-3676 331, 579
145-7133 57
152-8047 39 154-3677 471
145-7134 56
152-8048 68 155-2048 199
145-7135 56
152-8049 68 155-2742 158
146-0020 208, 210
152-8050 68 155-2754 157, 158
146-3584 186
152-8053 68 155-8399 206
146-5126 197
152-8054 116, 533 155-8400 206
146-5132 48, 49
152-8055 116 155-9879 197
147-5330 187
152-8057 116 156-4653 197
147-5331 187
152-8069 6, 7, 216, 289, 434 156-4701 39, 40, 470
147-5332 187
152-8070 37, 38, 39, 40, 202, 226, 156-5342 77, 78, 79, 85, 87
147-5333 187 469, 470
147-6879 206 156-5351 197
152-8071 66, 68, 69, 70, 208, 209,
147-6880 206 346, 353, 488, 509, 512 156-8357 197
148-2465 202, 203 152-8073 114, 116, 117, 118, 144, 157-1373 74
146, 147, 160, 161, 374,
148-2487 203, 230 529, 531, 533, 548 157-1374 74, 75, 358
148-2494 203, 230 152-8075 7, 289, 434 157-4292 168
148-2594 203, 230 152-8080 116, 533 157-4293 190
148-2596 203, 230 153-3901 157 159-3658 87
148-2720 215 153-4874 196 159-3662 79, 85, 87
148-2721 215 153-4875 196 159-8862 146
148-3531 312 153-4878 196 160-4103 93, 94, 95
148-3533 295, 312 153-4962 196 160-4104 94
149-1049 205 153-4963 196 160-4106 94
149-1050 205 153-5044 77, 78, 79 160-4939 74
149-1051 205 154-3298 150, 151, 152, 153, 157, 160-4940 74
163 160-5798 74
149-1054 204
154-3306 186 160-5799 74
149-1056 204
154-3307 150, 151, 152, 153, 163 160-6631 197, 295
149-2494 76, 80, 81, 82, 83, 84, 85,
87 154-3308 184, 185 160-6910 79, 85, 87
149-2495 76, 80, 81, 82, 83, 85, 87, 154-3309 175, 176 160-7816 8, 9, 217, 285, 287, 432,
212 433
154-3641 243
150-1989 206 160-7818 41, 42, 43, 227, 228, 331,
154-3644 243, 419
150-1990 206 334, 354, 355, 460, 462,
154-3645 243, 419 468, 471, 495, 553, 579
150-4373 289, 434
154-3646 243, 419 160-7819 69, 70, 346, 347, 352, 488,
151-0924 207 489, 494, 509, 510, 511,
154-3647 442, 453 582
151-0925 207
154-3652 315 160-7820 66, 208, 209, 353
151-0926 206, 207
154-3654 290, 315, 442, 452, 453 160-7821 68, 512
151-8863 116

631
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
160-9359 212 165-1746 7 167-1951 84
160-9756 13, 14, 15, 46, 47, 220, 232 165-1747 7 167-1952 84
160-9757 13, 14, 15, 220 165-1748 7 169-0161 139
160-9761 13, 14, 15, 220 165-1749 7 169-0162 139
161-2166 540 165-1750 39, 40, 470 169-0163 138
161-4000 289 165-1751 39, 40, 470 169-0164 138
161-7247 13, 14, 15, 46, 47, 220, 232 165-1752 39, 40, 470 169-5867 74, 75, 358
161-7249 13, 14, 15, 46, 47, 220, 232 165-1753 39, 40, 470 169-5868 74
161-7350 46, 47, 232 165-1754 68, 512 170-0792 84
161-7550 46, 47, 232 165-1755 68, 512 170-3823 119, 536
161-8581 112 165-1756 68, 512 170-3827 119, 536
161-8582 141 165-1757 68, 512 171-2382 74
162-2166 76, 80, 81, 82, 83, 84, 85, 165-1758 116, 533 171-2383 74
87, 90, 121, 122, 123, 124,
125, 126, 127, 128, 129, 165-1759 116, 533 171-2386 74
130, 134, 135, 155, 164, 165-1760 116, 533 171-2387 74
178, 212, 213, 384, 520,
538, 539, 560 165-1761 116, 533 171-5713 190
162-2167 150, 151, 152, 153, 163, 165-1767 7 171-5882 90, 134, 135, 213, 384,
175, 176, 186 520, 538, 539, 540, 560
165-1768 39, 40, 470
162-2168 154, 184, 185, 199 172-0160 257, 427
165-1769 68, 512
162-7862 76, 80, 81, 82, 83, 84, 85, 172-6219 102
165-1770 116, 533
87, 121, 122, 123, 124, 172-6220 102
125, 126, 127, 128, 129, 165-3663 138, 139, 141, 142
130, 155, 164, 178, 212 172-6228 103
165-3664 138, 139, 141, 142
162-7863 150, 151, 152, 153, 163, 172-6229 103
175, 176, 186 165-6942 123, 124, 127, 128, 132
173-0946 75, 210
162-7864 184, 185, 199 165-6946 77, 78, 80, 81, 82, 83, 84,
85, 212 173-7652 129
162-8438 200
165-7211 137 173-7653 129
163-2169 92, 93
165-7574 137 173-7656 129
163-2170 92, 93
165-7576 137 173-7657 129
163-2171 92, 93, 94
165-7855 179 173-7658 129
163-2172 92, 93, 94
165-7860 179 173-7659 129
163-2173 93, 95
165-7861 179 173-7660 129
163-2174 93, 95
165-7862 179 174-5948 266
163-2175 93, 94, 95
166-0613 475, 476, 477 174-5949 266
163-2176 93, 94, 95
166-2121 476, 477 174-6897 87
163-2177 92, 94, 96
166-2123 476, 477 174-6977 309
163-2178 92, 94, 96
166-2287 99, 100, 101, 102, 103, 174-6978 309
163-2179 94 104, 105, 106, 107, 108,
109, 110, 111, 112, 113 174-6979 266, 267
163-2180 94
166-3315 126, 128 174-6980 266, 267
163-2415 157, 158
166-3316 126, 128 174-6981 266, 267
163-2922 203, 230
166-3317 125, 126, 127, 128 174-6982 266, 267
163-2923 203, 230
166-3318 126, 127, 128 174-6983 263, 300
163-2924 203, 230
166-3324 153, 176 174-6985 263, 300
163-2925 203, 230
166-3449 138 174-6986 267
163-6406 162
166-3451 138 174-6987 267
163-8686 141
166-9445 185 174-6992 263, 300
163-8688 142
167-1946 185 174-6993 263, 300
164-0403 112
167-1947 176 174-6994 263, 300
164-4611 112
167-1950 84 174-7001 253
165-0935 262

632
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
174-7002 253 175-8682 583 185-5257 74
174-7006 293 175-8723 580 185-6151 338, 359, 474, 556
174-7007 293 175-8728 584 185-6152 474
174-8783 79, 85, 87 175-8759 586 186-0780 167, 172
174-8786 79, 85, 87 175-8802 587 186-0781 172, 173
174-8788 79, 85, 87 175-8881 587 186-5318 199
174-8789 79, 85, 87 175-8882 587 186-5319 199
174-8790 79, 85, 87 175-8923 580 187-1011 197
174-9226 87 175-8924 580 187-1484 197
174-9228 87 175-8925 579, 580 187-2003 472
175-3828 142 175-8926 579, 580 187-2004 472
175-3829 138 175-8927 582, 583 187-2005 472
175-3830 138 175-8928 582, 583 187-2006 472
175-3831 139 175-8929 583 187-3298 200
175-8019 579 175-8930 583 187-4845 338, 474
175-8020 580 176-1281 309 187-9317 485
175-8021 580 176-3692 512 187-9318 485
175-8022 580 176-9728 263, 300 188-1452 197
175-8023 580 178-1096 61 188-1620 588
175-8024 581 178-7195 138, 139, 140, 141, 142, 188-5246 587
143
175-8025 581 188-5251 586
179-0126 37, 38, 202, 226, 469
175-8031 584 188-5252 586
180-0507 347, 489
175-8032 584 188-5257 588
180-0509 347
175-8035 585 188-5258 588
180-4995 199
175-8036 585 188-5261 587
180-7319 275
175-8038 585 188-5262 587
180-7320 275
175-8248 579, 580 188-5263 587
180-7321 275, 276, 277, 304, 305
175-8249 579, 580 188-5264 587
183-2122 173
175-8255 581 188-5268 588
183-2131 181
175-8256 582, 583 188-5270 584
183-2381 304
175-8257 582, 583 188-5271 585
183-2382 304
175-8263 585 188-5272 585
183-5204 28
175-8353 583 188-5310 392
183-5207 28
175-8365 580 188-5311 396
183-5213 24
175-8366 580 188-5312 396
183-5214 24
175-8367 580 188-5313 396
183-5949 24
175-8368 580 188-5314 396
183-5950 24
175-8369 584 188-5333 587
183-8467 33
175-8370 584 188-5334 587
183-8468 28
175-8371 584 188-5381 584
184-2607 199
175-8372 584 188-5383 584
184-4395 165, 179
175-8396 580 188-5385 584
184-4396 171, 187
175-8397 580 188-5387 584
184-6305 198, 199
175-8552 579, 580 188-5396 584
184-6306 199
175-8553 580 188-5397 584
185-5253 74
175-8555 582 188-5527 582
185-5254 74
175-8673 580 188-5531 392, 393
185-5256 74
175-8674 580 188-5532 392, 393

633
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
188-5588 582 188-5764 583 195-7707 526
188-5590 585 188-5765 580 195-7711 526
188-5591 584 188-5767 583 196-1232 74
188-5592 584 188-5773 579 196-1233 74
188-5593 584 188-5800 583 196-1234 74
188-5594 584 188-5835 579 196-1235 74
188-5595 586 188-5844 579 196-1236 74, 75, 358
188-5596 588 188-5851 579 196-1237 75, 358
188-5597 588 188-5856 582, 583, 586 196-1712 24
188-5600 588 188-5857 392, 393 196-1713 24
188-5601 587 188-6246 240, 418, 576 196-1714 24
188-5602 587 188-8764 240, 418, 576 196-4404 249
188-5603 587 189-3032 93, 94, 95 196-4405 249
188-5604 587 190-1534 13, 220 196-4672 473, 474
188-5605 587 190-1536 13, 17, 220 196-7074 54
188-5606 587 190-1546 47, 232 196-7078 54
188-5607 402 190-1547 47, 50, 232 196-7111 23, 24
188-5608 402 190-1551 13, 14 196-7112 23
188-5610 398 190-2495 13, 14, 17, 18 196-7113 23
188-5612 400 190-6079 513 196-7114 23
188-5613 396 190-7396 251, 425 196-7839 74
188-5614 396 191-2024 526 196-9954 178
188-5615 396 191-2025 526 196-9955 177, 178
188-5616 396 191-2028 544 196-9956 178
188-5617 396 191-2029 544 196-9957 178
188-5618 396 191-4799 523 197-7752 125, 127
188-5633 582, 583 191-4800 523 197-7753 125, 127
188-5634 582, 583 192-0213 121, 123, 129 197-7754 125
188-5635 584 192-0215 121, 125 197-9672 473
188-5636 586 192-0216 121 197-9673 513
188-5637 586 192-0219 121 197-9674 473, 474
188-5638 587 192-0223 123, 127 197-9677 292, 434, 435
188-5639 392, 393 192-0224 123 197-9678 292, 434, 435
188-5640 392, 393 192-0811 129 197-9679 381, 382, 537, 555
188-5641 397, 398 192-2547 526 198-3378 309
188-5658 392 192-2548 523 198-4769 85
188-5679 582 192-2549 544 198-4778 16, 48, 279, 280, 306, 307,
313
188-5689 392 192-2550 544
198-6093 276
188-5693 582 192-3184 485
198-6094 276
188-5694 582 192-3185 483
198-6703 157
188-5698 586 193-9146 468
198-6704 157
188-5699 586 194-6843 240, 576
198-6726 127
188-5700 586 195-5853 186
198-6859 157
188-5701 586 195-5854 186
198-6987 249
188-5710 392 195-5855 185, 186
198-6988 249
188-5711 392, 393 195-5856 186
198-6989 249
188-5712 392, 393 195-7701 526
198-6990 249
188-5721 586 195-7702 526

634
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
198-6991 249 203-4604 259 208-1508 67
198-6992 249 203-6580 210 208-5323 196
198-7722 64, 507, 508 203-7987 210 208-5324 196
198-9059 544 203-8040 137 209-4537 196
199-2794 117, 118, 144, 160, 374, 204-0365 313 209-4538 196
529, 531, 548
204-6355 55, 56 209-4541 183
199-4907 265
204-6365 26, 28, 31, 32, 33, 60, 61, 209-4542 183
199-4908 265 312, 313, 314
212-4205 474
199-4909 265 204-9748 167
212-4206 474
199-4910 265 205-0709 80
214-1109 89
199-5522 173 205-1768 209
215-1574 312
199-5523 173 205-5796 146
215-7492 193, 195
199-5525 172 205-6140 26, 28
215-7493 193, 195
199-5531 173 205-6141 55, 56
215-7494 193
199-5533 167 205-6142 28
215-7495 194
199-5534 167 205-6143 28
215-7497 194
199-5537 173 205-6155 33
215-7678 195
199-5538 173 205-6157 33
216-2956 253, 254, 258, 259, 260,
200-4074 148 205-6158 28 261, 428
200-5701 199 205-6159 28 216-2957 253, 254, 258, 259, 260,
261, 428
200-5702 199 205-6164 61
216-6286 12, 290
200-5856 73 205-8267 240, 418, 576
217-5257 146
200-6325 195 206-1895 84
218-0048 544
200-6326 195 206-1897 84
218-0049 544
200-6493 74 206-2087 212
218-0050 544
200-6494 74 206-3128 240, 243, 245, 418, 419
218-0051 544
200-6495 74 206-3130 240, 418, 576
218-3274 4, 288
200-6496 74 206-3502 321
218-3387 74
200-6497 74 206-3504 321
218-3388 74
200-6498 74 206-3505 321
218-4993 19, 20, 312
200-9133 579, 580 206-3506 321
218-7347 145
200-9150 579, 580 206-3507 320, 446
220-7079 182
200-9180 579 206-3509 320
221-0011 251
200-9185 581 206-3510 291, 320
221-0012 251
200-9235 581 206-3511 291, 320
221-8170 196
200-9236 585 206-3512 320
221-8176 196
200-9237 588 206-3514 320
221-8177 196
200-9238 398 206-3515 320, 446
221-8178 196
202-2404 211 206-3517 320
221-8180 196
202-4295 81, 82, 83, 84, 212 206-3518 291, 320
222-1796 45
202-4296 81, 82, 83 206-3519 291, 320
222-1797 45
202-4303 80, 83, 84 206-3520 320
222-3668 279
202-4304 80, 83 206-3522 320
222-6998 533
203-0306 209 206-8837 111
222-7001 180, 182, 188, 189
203-0944 167 207-0544 66, 68, 69, 70, 208, 209,
346, 353, 488, 509, 512 222-7007 193, 195
203-2198 146
207-0545 166, 167, 172, 173 223-1617 160, 161
203-2199 173
208-0763 483 223-1618 160, 161
203-2200 173
208-0764 483 223-9110 51, 480

635
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
224-3959 8, 217, 285, 287, 432 231-0160 196 234-7703 168
224-5918 198 231-0161 196 234-9672 63, 64
225-7650 257 231-3079 428 234-9699 63, 64, 507, 508
226-0268 183 231-3080 428 234-9700 72
226-0269 183 231-3087 90, 520 234-9704 72
227-5971 18, 296 231-3088 90, 520 234-9705 72
227-9954 8, 217, 285, 287, 432 231-3089 90, 520 235-1397 72
227-9960 287, 432 231-3090 135, 540 235-2213 180, 182, 188, 189
227-9976 8, 287 231-3091 135, 540 235-2501 35, 467
228-2735 69, 346, 348, 350, 488, 231-3092 135, 540 235-2503 44
490, 492, 509
231-3093 213 235-2504 44
228-2736 69, 346, 348, 350, 488,
490, 492, 509 231-3712 512 235-2510 35

228-2737 69, 346, 348, 488, 490, 509 231-3713 512 235-2511 35

228-2738 69, 346, 348, 488, 490, 509 231-3714 508 235-2514 4, 288

228-2739 69, 346, 348, 488, 490, 509 231-3715 508 235-2522 288

228-2740 69, 346, 348, 488, 490, 509 231-4010 525 235-2523 288

228-2743 8 231-4011 523 235-2528 5

228-2744 8, 217, 218 231-4605 195 235-2529 286, 311

228-3710 15 231-4606 195 235-2533 311

228-3711 15 231-4607 195 235-2534 291, 311

228-4230 476 231-4608 195 235-2535 286

228-4231 515 231-9484 196 235-2536 286

228-7597 183 231-9486 196 235-2549 288

228-7598 183 232-3326 174 235-2550 288

228-9812 174 233-0368 48, 49 235-2552 288

229-1525 196 233-0372 48, 49 235-2554 291, 311

229-3525 193 233-0385 374, 376, 531, 548 235-2555 291

229-3526 193 233-0386 374, 376, 531, 548 235-2558 250

229-3527 193 233-4846 77, 78, 85 235-2559 250

229-3528 193 233-4848 79, 85 235-2560 242

229-5446 50, 478 233-4851 79, 85 235-2561 242

229-6909 41, 227, 229, 468 233-5001 23, 24 235-2563 242

229-6910 41, 227, 229, 468 233-5188 242 235-2566 242

229-6915 41, 227, 468 233-7230 472 235-2619 35

229-9556 99, 100 234-4319 49, 77, 78, 79 235-2620 4

229-9557 99, 100 234-4320 78 235-4157 89, 518

229-9558 99, 101 234-5974 174 235-5974 88, 312, 516

229-9559 99, 101 234-5975 174 236-1870 12

229-9568 100, 101 234-5977 174 236-8178 529

229-9569 100, 101 234-6028 183 236-8179 531

230-3996 494 234-6029 183 236-8805 182

230-4512 69, 346, 488, 509 234-6030 183 236-9861 346, 488, 582

230-6167 509 234-6031 183 236-9864 69, 346

230-6173 509 234-6032 183 236-9865 69

230-7177 472 234-6033 183 236-9866 69, 346

230-7269 472 234-6084 174 236-9874 69

230-7272 41, 468 234-6943 180, 182 237-3790 117, 118, 374, 529, 531,
548
230-7273 468 234-6944 180, 182

636
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
237-7305 348, 350, 490, 492 241-7870 311 245-9948 186
237-7306 350, 492 241-7871 44 245-9949 186
237-7530 65 242-6373 194 245-9950 197
237-7531 72 242-6374 194 245-9951 199
237-7607 72 242-8904 73 245-9952 199
237-8052 72 243-0495 467 246-0775 153, 155, 164
237-8201 297 243-0499 467 246-0779 155, 164
238-0450 78 243-0501 472 246-0780 155, 164
238-0452 49, 77, 78, 79 243-2693 250 246-4341 49
238-0453 49, 77, 78, 79 243-3277 259 246-5049 242
238-0472 286, 311 243-4365 174 246-5140 72
238-0473 286, 311 243-4366 174 246-5203 72
238-6928 41 243-4367 174 246-5205 72
238-6929 227, 229 243-4368 174 246-5207 72
238-6930 41 243-4370 174 246-5211 73
238-6931 41 243-4372 183 246-5213 72
238-7860 539 243-4373 183 246-5216 64
238-7861 539 243-4374 183 246-5218 64
238-8371 250 243-4375 183 246-5220 65
238-9851 180 243-5319 295 246-5222 65
238-9852 182 243-5321 292, 293, 312 246-5223 65
238-9950 350, 492 243-5322 312 246-5225 242
238-9951 348, 490 243-5325 213 246-5226 242
238-9954 348 243-5728 120 246-5473 250
239-0673 188 243-5729 120, 380 246-5474 250
239-0674 189 243-5730 120 246-5475 250
239-0675 188 243-5731 120, 380 246-5476 250
239-0676 188 243-5732 120 246-5479 242
239-0677 188, 189 243-5733 120, 380 246-5714 49
239-0678 188, 189 243-5734 120 246-5726 311
239-0679 189 243-5735 120 246-5727 311
239-0680 189 243-5736 120 246-5738 5
239-2230 374 243-5737 120 246-5747 44
239-2309 183 244-0878 150 246-5748 44
239-2310 183 244-0879 150, 152, 163 246-5749 44
239-5272 180, 182, 188, 189 244-1323 153 246-5750 44
239-5509 180, 188 244-1324 153 246-5751 44
239-6877 374 244-4534 471, 472 246-5808 376
239-6881 548 244-6571 41, 227, 468 247-0264 119
239-6882 374 244-6572 41, 227, 468 247-1475 376, 534
239-7943 114, 116, 144, 146, 147, 244-6573 41, 227, 468 247-1476 534
160, 161
244-6574 41, 227, 468 248-1537 408
239-8211 312
245-9942 175 248-1539 394, 567
240-2503 350, 492
245-9943 178 248-2987 158, 159
240-2504 350, 492
245-9944 178 248-3955 26
240-8933 19, 20, 312
245-9945 178 248-3957 26
240-9557 51, 480
245-9946 178 248-3971 48
241-1855 155
245-9947 184 248-3972 48

637
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
248-5304 16 250-9513 255 254-0228 241
248-5317 135 250-9514 255 254-0230 72
248-5319 135 250-9515 295 254-0232 72
248-5325 16 250-9516 295 254-0233 73
248-5326 16 251-1659 117, 118, 374, 529, 531, 254-0234 73
548
248-5531 193, 195 254-0235 73
251-1660 117, 118, 374, 529, 531,
249-2939 129 548 254-0634 252
249-2940 129 251-3273 171, 187 254-0635 292, 293
249-5288 194 251-3280 192, 200 254-0644 252
249-5500 543 251-8531 313 254-0645 292, 293
249-5501 543 251-8532 313 254-0669 299
249-5507 544 251-8570 60 254-0681 299
249-5509 544 251-8578 31, 32 254-3801 16
249-6630 196 251-8580 31, 32, 33, 313 254-3802 16
249-7174 166, 167, 172, 173 251-8595 15 254-3927 48, 49
249-7627 255 251-8596 15 254-3928 48, 49
249-7628 255 251-8597 15 254-3929 48, 49
250-0367 295 251-8603 54 254-3971 180, 182, 188, 189
250-0368 295 252-1578 309 254-4432 16
250-2336 394, 567 252-5387 277 254-4433 16
250-2337 408 252-5388 277 254-4467 72
250-3988 37, 38, 39, 40, 41, 42, 202, 252-6327 180, 182, 188, 189 254-4468 72
226, 227, 228, 468, 469,
470 252-6329 180, 182, 188, 189 254-4469 72

250-3990 331, 334, 354, 355, 460, 252-7855 37, 38, 41, 42, 202, 226, 254-4470 72
462, 471, 495, 553, 579 227, 228, 468, 469 254-4471 72
250-3992 6, 7, 216, 289, 434 252-7856 6, 216 254-4472 72
250-3996 347, 352, 489, 510, 511, 252-7857 347, 352, 489, 494, 510, 254-4473 72
582 511
254-4474 72
250-3998 375, 378, 530, 532, 549, 252-7858 375, 378, 530, 532, 549,
551, 586 551 254-4475 72
250-4000 8, 9, 217, 285, 287, 432, 252-7859 331, 334, 354, 355, 460, 254-5240 524
433 462, 471, 495, 553 254-5241 524
250-4002 240, 243, 245, 418, 419, 252-7860 8, 9, 217, 285, 287, 432, 254-5242 524
421, 576 433
254-5243 524
250-4004 290, 315, 442, 452, 453 252-7861 240, 243, 245, 418, 419,
421 254-5288 484
250-4215 166
252-7862 290, 315, 442, 452, 453 254-5289 484
250-4216 166
252-9705 74 254-5290 485
250-4217 167
252-9706 74 254-5291 485
250-4218 167
252-9707 74 254-7199 38
250-4219 166, 167
252-9708 74 254-7200 7
250-4220 166, 167
253-0543 524 254-9047 44
250-4243 173
253-0544 524 254-9048 44
250-4244 173
253-0548 522 254-9049 44
250-4245 172
253-1519 148 254-9050 44
250-4246 172
253-3667 526 254-9051 44
250-4247 172, 173
253-3668 526 254-9052 44
250-4248 172, 173
254-0224 64, 507, 508 254-9053 44
250-9471 276
254-0225 35 255-1075 482
250-9472 276
254-0227 4 255-1076 482
250-9505 303

638
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
255-1530 11 257-7777 577 261-2046 56
255-1532 11 257-8012 579, 580 261-2047 56
255-1533 11 257-8013 579, 580 261-2070 314
255-1534 11 257-8016 579, 580 261-2082 313
255-1536 11 257-8017 579, 580 261-2083 313
255-1537 11 257-8020 579 261-2353 117, 118, 374, 529, 531,
548
255-4791 117, 374, 376, 529, 531, 257-8021 579
548 261-4338 193, 195
257-8022 580
255-4792 117, 374, 376, 529, 531, 261-4408 193, 195
548 258-4614 197
261-4472 293
255-4793 117, 374, 376, 529, 531, 258-6544 515
548 261-4473 252
258-9787 250
255-4794 117, 374, 376, 529, 531, 261-7105 487
258-9788 292
548 261-8008 577
258-9792 251
255-5983 515 261-9672 153, 176
258-9793 251
255-7174 92, 93, 95, 96 261-9673 153, 176
258-9802 473
255-8060 514 261-9674 185
258-9803 473
255-8095 311 261-9675 185
259-1072 515
255-8882 134, 384, 538, 560 262-2093 292
259-6864 485
255-9219 381, 382, 555 262-5877 299
259-7062 579
256-0591 65 262-5878 299
259-7063 582
256-0592 65 263-2009 303
259-7064 586
256-0593 65 263-2010 303
259-7065 392
256-0595 65 263-2011 264
260-1507 579
256-0597 65 263-3227 269
260-1508 579
256-0599 65 263-3230 269
260-1509 579
256-4873 36 263-3232 269
260-1511 581
256-4944 11 263-3234 269
260-1512 580
256-4971 512 263-5396 240
260-5851 584
256-6084 193, 195 263-8325 263, 264, 265
260-6740 241
256-9360 66, 69, 70, 208, 209, 346, 263-8332 264
353, 488, 509 260-6744 241
263-8337 263, 264, 265
256-9612 507 260-6745 241
263-8342 272
257-1990 576 260-6747 241
263-8343 272
257-1991 576 260-6748 241
263-8355 263
257-1992 576 260-6765 11
263-8356 263
257-1993 577 260-6766 11
263-8363 263, 264, 265
257-1994 576 260-6767 11
263-8364 263, 264, 265
257-2336 11 260-6768 11, 291
263-8365 299
257-7765 576, 577 260-6769 11, 291
263-8366 299
257-7766 576, 577 260-6770 291
263-9759 380, 536
257-7767 576, 577 260-6771 11
263-9760 380, 536, 554
257-7768 576, 577 260-6772 11, 291
263-9761 380, 536, 554
257-7769 576 260-6773 11, 291
263-9762 380
257-7770 576 261-1614 534
263-9763 120
257-7771 576 261-2040 26
263-9764 120, 380
257-7772 576 261-2041 26
264-1108 512
257-7773 576, 577 261-2042 26
264-1110 472
257-7775 577 261-2043 26
264-7098 487
257-7776 577 261-2044 55

639
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
264-7099 487 275-3567 577 279-4242 78
265-0929 303 275-3570 577 279-4243 78
265-0932 303 275-3571 577 279-9120 476
265-0934 303 275-3576 578 279-9322 475
265-0935 262, 303 275-3578 578 279-9325 475
265-0940 309 275-3579 578 280-1417 476
265-0945 262 275-3580 578 280-8722 512
265-0946 262 275-3581 578 281-6370 396
265-0949 262 275-4086 578 281-6371 396
265-0953 262 275-5133 65 281-6372 396
265-8320 72 276-1680 305 281-6373 396
265-8321 72 276-1681 305 281-6374 396
266-0083 72 276-1690 300 281-6380 402
266-0084 72 276-1691 300 281-6386 402
266-0088 72 276-1692 303 281-8338 259, 260, 261
266-0089 72 276-1699 300 281-8339 259, 260, 261
266-3152 159, 165, 179 276-1700 300 282-3655 381, 382, 537, 555, 556,
587
267-6099 44 276-1701 300
282-3669 279
267-6131 269 276-1702 300
282-3679 306
267-6132 269 276-1711 262
282-4017 77, 78, 79
267-6136 269 276-1716 276, 277
283-5249 77, 79
267-6137 269 276-1717 276, 277
283-5250 77, 79
267-8910 44 276-1718 276, 277, 305
283-5251 78
268-5945 111, 112 276-1753 279
283-5252 78
269-1133 11 276-1754 279
283-5253 77, 79
270-2672 72 276-1755 307
283-5254 77, 79
270-2673 64 276-1757 280
283-5746 48, 49
270-8802 241 276-1766 280
283-5748 48, 49
271-6033 314 276-2414 183
283-5750 48, 49
271-6079 23 276-2416 183
283-5752 48, 49
271-6080 313 276-2417 183
283-5753 48, 49
271-6081 313 276-2418 183
283-6423 265
271-6093 48 277-2238 311
283-6424 265
271-6094 49 277-2239 311
283-6425 265
271-6095 49 277-2240 311
283-6426 265
271-6117 16 278-1011 280
283-8702 72
271-6118 16 278-2355 250
283-8705 72
272-6009 146 278-2356 250
283-8707 72
272-6010 144 278-2358 291
283-8709 72
272-6013 114, 144, 146, 147, 160, 278-2359 291
161 283-8710 73
278-2363 121, 149
273-1685 72 283-8714 72
278-2374 183
273-1686 72 283-8715 72
278-2376 174
274-2008 72 284-5456 155, 164
278-9538 155, 164
274-7839` 44 284-7832 263
278-9539 155, 164
275-3564 577 284-7833 263
278-9540 155, 164
275-3565 577 285-4296 512
278-9541 155, 164
275-3566 577 285-7499 299
279-1695 307

640
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
285-7502 299 290-7312 180 302-1516 190
285-7505 299 290-7313 182 302-5722 258
285-7511 299 290-7314 182 305-1439 282
286-1832 273 291-1612 117, 529 305-1442 282
286-1833 273 291-1613 117 305-1443 282, 283
286-1840 273 291-1615 117 305-1446 282, 283
286-1845 272 291-5594 72 305-1448 282
286-1846 272 291-9151 72 305-1449 282
286-1850 273 292-6379 512 305-1450 282
286-1858 304 292-6380 512 305-1451 283
286-1859 304 292-6381 512 305-1453 283
286-4226 514 293-4691 77 305-1454 283
286-4227 514 293-4692 78 305-1455 283
286-4261 264 293-4693 79 305-1456 307
286-4262 264 293-9146 41, 227 305-1458 307
286-7211 299 293-9147 69, 346, 488, 509 305-1460 307
286-7212 299 294-0567 72 305-1462 307
286-9305 76, 85 294-0569 72 305-1463 307
286-9306 76, 85 294-0570 72 305-1464 307
287-4021 264 294-0571 72 305-1465 307
287-4022 264 294-0574 72 305-1466 308
287-4023 264 294-0575 72 305-1469 308
287-4024 264 294-4813 44 305-1471 308
287-6104 44 296-0068 16 305-1473 308
287-6106 36 297-4786 63, 64, 507, 508 305-1474 308
288-0934 89, 365, 502, 519 297-4787 63, 64, 508 305-1475 308
288-0935 89, 365, 502, 519 297-4788 63, 64 306-9431 169, 184, 185
288-0936 89, 519 297-4789 63, 64 306-9433 197
288-0945 89, 365, 502, 519 297-8453 72 306-9435 199
288-0946 89, 365, 502, 519 297-8454 72 306-9437 151
288-0947 89, 365, 502, 519 297-8455 72 306-9439 151
288-0948 89, 365, 502, 519 297-8456 72 306-9441 150, 152, 153, 163, 175,
176
289-0270 285 297-8457 72
306-9443 175, 176
289-3083 534 297-8458 72
306-9445 175, 176
289-3084 534 297-8459 72
306-9447 184, 185
289-3085 311 297-8460 72
306-9449 184, 185
289-5210 44 298-2723 35, 467
306-9451 197
289-5214 72 298-2724 35, 467
306-9453 197
289-8083 117, 529 298-2726 35
306-9455 199
289-8084 117, 529 299-0947 365
306-9457 199
290-0737 46 300-0417 11
306-9460 148
290-0738 46 300-0418 11
308-6854 513
290-2239 72 300-3658 471
309-9435 198
290-2240 72 300-3660 471
310-0650 258
290-2700 307, 308 301-0650 258
310-7375 302
290-3391 282, 283 301-0652 258
310-7376 302
290-6589 583 301-0654 258
310-7502 261
290-7311 180 301-4302 241

641
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
310-7503 261 1A-7774 278 1K-3478 527
310-8310 484 1A-8063 26, 32, 33, 165 1K-7183 546, 547
310-8311 484 1A-8537 20, 221, 297, 344, 345, 1L-5072 22, 53, 222, 235, 298, 439,
367, 438, 456, 503, 566, 457, 482
310-8312 484 585
1M-1408 6, 7, 8, 9, 10, 11, 41, 42,
311-6643 311 1A-8651 13, 14, 17, 18, 47, 50, 220, 43, 216, 217, 218, 227,
311-6644 311 232 228, 229, 285, 287, 289,
290, 315, 316, 317, 331,
312-2269 4 1B-4206 344, 345 332, 333, 334, 335, 336,
1B-4367 20, 22, 53, 222, 235, 298, 337, 354, 355, 356, 357,
312-2270 4
344, 439, 457, 482 432, 433, 434, 442, 443,
312-2271 4 444, 452, 453, 460, 461,
1D-4585 345, 365, 502 462, 468, 471, 495, 496,
312-2273 4 497, 553, 554, 579, 580
1D-4586 391
313-4542 44 1M-1455 393, 395, 568
1D-4593 16
313-4543 44 1M-3097 19, 20, 21, 52, 205, 221,
1D-4608 90, 366, 372, 506, 520,
313-4548 11 233, 234, 257, 293, 294,
522, 585 296, 297, 322, 323, 324,
315-6693 396 1D-4609 387, 546, 564, 588 325, 326, 327, 339, 340,
341, 342, 361, 362, 363,
317-9078 365, 502 1D-4610 89, 91, 233, 235, 365, 502, 368, 427, 436, 437, 438,
518, 519, 521 447, 448, 449, 450, 454,
317-9079 89, 365, 502, 518, 519
1D-4614 231 455, 456, 458, 463, 464,
317-9080 89, 518, 519 465, 475, 476, 477, 478,
1D-4615 80, 81, 82, 83 481, 500, 504
0L-1351 19, 257, 283, 284, 296,
326, 427, 437, 449, 455 1D-4616 87 1M-3121 340, 362
0L-1714 373 1D-4617 79, 86 1M-3669 377, 379, 534, 535, 550
0S-1566 524, 566 1D-4625 415 1M-3670 534
0S-1585 157, 191, 259, 260, 261, 1D-4628 546 1M-4021 404
399, 400, 403, 404, 428,
569, 578 1D-4629 135, 386, 540, 542, 563, 1M-7749 329
588
0S-1587 361, 362, 413, 414, 500, 1M-7750 329
572 1D-4630 402, 403, 404, 414, 572,
573 1M-7795 329
0S-1588 323, 324, 325, 339, 340, 1M-7796 329
360, 448, 463, 499 1D-4634 121, 122, 125, 126, 130,
131, 133 1M-7911 341, 363, 464
0S-1589 523, 524
1D-4639 191 1M-7912 341, 363, 464
0S-1592 389, 573
1D-4640 402, 403, 413 1M-7913 341, 363, 364, 464, 518
0S-1594 22, 51, 53, 80, 81, 82, 83,
88, 91, 134, 154, 204, 212, 1D-4642 163 1M-7914 19, 257, 296, 326, 341,
222, 231, 235, 298, 329, 1D-4719 278 363, 364, 427, 437, 449,
341, 363, 364, 384, 385, 455, 464, 480, 501, 518,
401, 402, 439, 457, 464, 1D-5976 123, 124, 127, 128, 132 562
479, 480, 482, 501, 517,
518, 521, 538, 560, 561, 1F-7958 278, 279 1M-7915 341, 363, 464
562, 570, 571 1H-5728 399, 400, 401, 402, 514, 1M-7916 341, 363, 364, 464
0S-1595 136, 155, 156, 164, 170, 569, 570, 571
1M-7918 19, 257, 296, 326, 341,
178, 186, 278, 279, 345, 1H-6227 22, 52, 205, 222, 233, 234, 427, 437, 449, 455, 464
541 298, 339, 340, 342, 360,
361, 362, 368, 439, 457, 1M-8735 19, 257, 296, 326, 427,
0S-1621 165 437, 449, 455
463, 465, 475, 476, 477,
0S-1625 52 478, 481, 499, 500, 504, 1M-8736 19, 257, 296, 326, 427,
514, 515, 516 437, 449, 455
0S-1973 405, 406, 573
1H-7339 403 1M-8746 426
0S-2318 388, 565
1H-8128 20, 21, 46, 47, 50, 221, 1M-8747 51, 367, 514
0T-0320 122, 124, 130, 131, 132 232, 293, 294, 297, 322,
0T-0329 154, 570 323, 324, 325, 327, 438, 1M-8863 324
447, 448, 450, 454, 456,
0T-0772 322, 323, 324, 447, 448 1M-8864 324
458
0V-0375 345, 373 1M-8867 322, 323, 447, 448
1H-8720 51, 88, 134, 384, 385, 479,
517, 538, 560, 561 1P-0963 372, 506
1A-0458 546
1H-9696 19, 252, 253, 254, 255, 1P-2636 412
1A-1135 327, 344, 450, 458 256, 257, 296, 326, 341,
1A-1460 157, 164, 178, 186, 569 363, 364, 426, 427, 437, 1P-2662 412
449, 455, 464, 480, 501, 1P-8715 134, 384, 538, 560
1A-2029 322, 367, 447 518, 562
1P-8716 134, 384, 538, 560

642
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
1P-8717 134, 384, 538, 560, 588 1Q-4930 74 1S-8947 19, 51, 88, 134, 154, 296,
323, 324, 325, 326, 339,
1P-8787 386, 387, 388, 542, 563, 1Q-4935 74 340, 341, 360, 363, 364,
564, 565 383, 384, 385, 399, 400,
1Q-4937 67
1P-8851 566 401, 402, 403, 411, 413,
1Q-4946 119, 148 414, 437, 448, 449, 455,
1P-8852 566 464, 475, 476, 477, 478,
1Q-4950 120 479, 480, 501, 517, 518,
1P-9807 381, 536, 587
1Q-4955 120, 535 538, 557, 558, 559, 560,
1P-9808 380, 381, 587 561, 562, 569, 570, 571
1Q-4956 120, 380, 535
1P-9809 380, 381, 587 1T-0068 403, 413, 414
1Q-4958 74
1P-9810 380, 381, 587 1T-0720 133
1Q-4960 119, 148
1Q-0418 120 1T-0765 76, 80, 81, 82, 83, 85, 87,
1Q-4964 120, 380, 535, 536 212
1Q-4604 535
1Q-4965 120, 380, 535, 536 1V-3361 290, 315, 442, 452, 453
1Q-4607 74
1Q-4973 74 1V-4266 329
1Q-4609 513
1Q-4984 75, 358, 513 1V-4267 329
1Q-4610 513
1Q-4985 75, 358, 513 1V-4268 329
1Q-4625 74, 513
1Q-4994 74 1V-4269 329
1Q-4626 74, 513
1Q-4995 74 1V-4603 290, 315, 316, 442, 443,
1Q-4631 12, 219 453
1Q-4996 74
1Q-4632 12, 219 1V-4604 290, 315, 316, 442, 443,
1Q-4997 74
1Q-4636 181 453
1S-0454 407, 415, 573
1Q-4640 513 1V-4605 290, 315, 316, 442, 443,
1S-1859 69, 346, 347, 348, 349, 453
1Q-4641 513 350, 351, 352, 380, 488,
489, 490, 491, 492, 493, 1V-4606 290, 315, 316, 442, 443,
1Q-4645 120 494, 509, 510, 511, 552, 453
1Q-4649 174 582, 583 1V-5090 320
1Q-4651 183 1S-1860 37, 38, 39, 40, 44, 66, 68, 1V-5091 321
69, 70, 71, 118, 202, 203,
1Q-4658 120, 535 208, 209, 210, 226, 229, 1V-5092 320
346, 347, 348, 349, 350,
1Q-4659 120, 535 1V-7069 320
351, 352, 353, 374, 375,
1Q-4669 120, 535 376, 377, 378, 379, 380, 1V-7072 316
396, 469, 470, 488, 489,
1Q-4675 145 490, 491, 492, 493, 494, 1V-7074 443
1Q-4677 145 509, 510, 511, 512, 531, 1V-7075 316
532, 535, 548, 549, 550,
1Q-4685 145 551, 552, 582, 583, 586 1V-7077 496
1Q-4689 120, 380, 535 1S-1863 380, 552 1V-7873 498
1Q-4690 120, 380, 535 1S-1864 380, 552 1V-8173 505
1Q-4727 67 1S-2174 538, 560 1V-8176 505
1Q-4728 74 1S-3511 411 1V-8187 505
1Q-4729 74 1S-3512 411 1V-8202 505
1Q-4736 67 1S-3513 399, 400, 569 1V-8623 316, 317, 443, 444
1Q-4739 146 1S-3514 411 1V-9611 293, 294, 322, 323, 324,
325, 327, 436, 447, 448,
1Q-4743 67 1S-4446 409 450, 454, 458
1Q-4744 74 1S-4467 363 1Z-9353 159, 165, 179
1Q-4745 74 1S-4468 363 1Z-9417 148
1Q-4754 12 1S-6421 408, 409 1Z-9422 148, 162
1Q-4755 174 1S-6943 380, 552 1Z-9425 148, 162
1Q-4918 120, 535 1S-8186 383, 557, 558, 588 1Z-9478 168
1Q-4919 120, 380, 535, 536 1S-8725 397, 398 1Z-9479 168
1Q-4921 358, 513 1S-8839 396 1Z-9877 120
1Q-4922 358, 513 1S-8840 396 1Z-9960 148, 162
1Q-4924 74 1Z-9974 119, 148
1Q-4926 74 1Z-9983 148, 162

643
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
2A-0047 566 2P-3201 327, 342, 366, 367, 368, 3B-4506 257, 322, 323, 324, 325,
386, 387, 388, 450, 458, 339, 340, 360, 383, 427,
2A-3241 337, 357 465, 503, 504, 522, 542, 447, 448, 463, 499, 557,
2B-7408 361, 362, 500 563, 564, 565 558, 559
2D-0516 278, 279 2P-3514 134, 384, 538, 560 3B-4508 278, 343, 345, 361, 362,
369, 370, 372, 399, 400,
2D-3424 169 2P-3538 538, 560 403, 404, 500, 506, 569
2F-0023 344 2P-4092 568 3B-4510 329, 344, 345, 388, 389,
2P-4093 568 565, 566, 573
2F-0025 140, 141, 143
2P-6026 395, 568 3B-4512 329
2H-1190 91, 521
2P-8045 342, 368, 465, 504 3B-4514 402, 403, 404, 405, 406,
2H-3757 545 407, 415
2H-3856 136, 541 2P-8048 366, 367, 503, 522
3H-2643 339, 359
2H-3928 76, 80, 81, 82, 83, 84, 85, 2P-8052 403
3H-7654 169, 184, 190, 413, 414,
87, 90, 204, 212, 213, 231, 2P-9419 408 572
366, 367, 402, 412, 503,
520, 522, 571 2P-9423 408 3K-0715 197
2H-3931 411, 413, 414 2P-9424 408 3K-2866 322, 323
2H-3934 385, 561 2P-9484 394, 567 3K-2889 29, 30, 31, 34, 57, 58, 59,
60, 62, 225, 238
2H-3935 411, 412, 413, 414 2P-9486 394, 567
3K-4221 343
2H-4145 13, 14, 15, 17, 18, 220 2P-9653 375, 377, 379, 549, 550
3K-4222 343
2H-6338 51, 88, 134, 154, 341, 363, 2P-9654 375, 377, 379, 549, 550
364, 384, 401, 464, 479, 3K-5234 157, 170, 186, 403, 413
480, 501, 517, 518, 538, 2P-9655 375, 377, 379, 549, 550
560, 562, 570 3K-5235 402
2P-9656 375, 377, 379, 549, 550
2H-9247 121, 122, 123, 124, 125, 3K-6113 121, 122, 123, 124, 125,
2P-9669 381, 587
126, 127, 128, 129, 130, 127, 129, 130, 131, 132,
131, 132 2P-9670 118, 375, 377, 378, 379, 150, 151, 152, 163, 175
532, 549, 550, 551, 586
2J-3507 206, 207, 214, 215 3K-6620 324, 325
2S-0115 372
2K-2939 190, 197 3K-6638 19, 296, 326, 437, 449, 455
2S-0205 341, 464
2M-0849 259, 260, 261, 304, 305, 3N-3095 253, 254, 258, 259, 260,
345, 373, 428, 578 2S-0253 409 261, 426, 428
2M-2858 293, 294, 438, 475 2S-0278 573 3P-0615 381, 536, 587
2M-4668 345 2S-0736 365, 367, 502, 503, 585 3P-0616 381, 587
2M-5652 409 2S-2140 114, 116, 394, 395, 533, 3P-0617 381, 587
567, 568
2M-5656 183, 190, 410, 411 3P-0618 381, 587
2S-2181 19, 20, 21, 221, 257, 293,
2M-5657 408, 409 3P-0619 381, 536
294, 296, 297, 322, 323,
2M-6007 325 324, 325, 326, 327, 339, 3P-0620 381, 587
340, 341, 342, 361, 362,
2M-6008 325 363, 368, 427, 436, 437, 3P-0621 375, 549, 586
438, 447, 448, 449, 450, 3P-0622 375, 378, 530, 532, 549,
2M-7099 400 454, 455, 456, 458, 463, 551, 586
2M-7100 400 464, 465, 475, 476, 477,
478, 500, 504 3P-0623 375, 378, 530, 532, 549,
2M-7689 559 551, 586
2S-2182 339, 340, 342, 360, 361,
2M-7690 559 362, 368, 463, 465, 475, 3P-0628 549, 586
476, 477, 478, 499, 500,
2M-8810 397 3P-0955 377, 379
504, 514, 515, 516
2P-0347 19, 51, 88, 134, 154, 296, 3P-1088 349, 491
2S-5658 46, 75, 203, 210, 211, 230,
323, 324, 325, 326, 339, 292, 435 3P-1104 347, 352, 489, 494, 510,
340, 341, 360, 363, 364,
383, 384, 385, 399, 400, 2S-5959 337, 357 511, 582
401, 402, 403, 404, 411, 3P-1109 511, 582
413, 414, 437, 448, 449, 2S-5960 337, 357
455, 463, 464, 475, 476, 2S-6345 568 3P-1111 66, 69, 70
477, 478, 479, 480, 499,
501, 517, 518, 538, 557, 2S-7579 337, 357 3P-1112 347, 349, 351, 489, 491,
558, 559, 560, 561, 562, 493
569, 570, 571, 572 2V-3819 291, 320
3P-1113 347, 349, 351, 489, 491,
2P-0854 381 2V-5114 358, 497, 513 493
3B-1915 383, 557, 558, 559 3P-1133 75, 358
3P-1134 75, 358

644
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
3P-1847 190, 197, 404, 411, 413, 3P-7154 331, 332, 333, 335, 336, 3T-6210 120
414 354, 355, 356, 460, 461,
495, 496, 497, 553, 554, 3T-6212 120
3P-1848 404, 411, 413, 414 579, 580 3T-6269 154, 570
3P-1900 360, 499, 514, 515, 516 3P-7155 333, 336, 356, 497 3T-6292 193, 195
3P-2274 290, 315, 316, 331, 332, 3P-7156 333, 336, 356, 497
334, 335, 354, 355, 442, 3T-7192 137
443, 452, 453, 460, 461, 3P-7873 345 3T-7195 137
462, 471, 495, 496, 553,
554, 579, 580 3P-7874 345 3T-7392 136, 541
3P-2482 192, 200 3P-8272 339, 340, 361, 362, 463, 3T-7710 137
475, 476, 477, 478, 500
3P-3043 331, 332, 335, 354, 355, 3T-7711 137
460, 461, 495, 496, 553, 3P-8283 158
3T-8405 43, 228
554 3P-8432 383, 537, 557, 558, 559
3T-8406 43, 228
3P-3044 331, 332, 335, 354, 355, 3Q-5391 75, 358
460, 461, 495, 496, 553, 3T-8493 168
554 3S-1349 150, 151, 152, 153, 163,
169, 175, 176, 191, 196 3T-8494 409
3P-3045 331, 332, 335, 354, 355,
460, 461, 495, 496, 553, 3S-1356 196 3T-8496 168
554 3T-8497 409
3S-7090 382, 556
3P-3046 331, 332, 335, 354, 355, 3T-8499 168
3S-7461 410, 411
460, 461, 495, 496, 553,
554 3S-7837 397, 398 3T-8501 168
3P-3327 410 3S-8182 12, 219, 311, 338, 359, 3T-8502 168
454, 498, 513, 556, 581,
3P-3399 412 3T-8556 409
584
3P-3402 412 3T-8557 409
3S-8252 382, 555, 556
3P-3403 412 3T-8558 409
3S-9138 382, 556
3P-3804 573 3T-8559 409
3S-9139 382, 556
3P-3836 573 3T-8560 409
3S-9140 382
3P-3878 331, 334, 354, 355, 460, 3T-8561 409
3S-9199 556
462, 471, 495, 553, 579
3T-8562 409
3S-9993 382
3P-3888 338, 358, 462, 555
3T-8563 409
3T-0356 12
3P-3889 338, 358, 462, 555, 580
3T-8564 409
3T-0358 12
3P-3890 338, 358, 462, 580
3T-8565 409
3T-0360 12, 290, 434
3P-3891 338, 358, 580
3T-8580 41, 42, 43, 227, 228, 229,
3T-1248 190
3P-3892 338, 580 468
3T-2758 168
3P-3893 338 3T-8584 45, 230
3T-3206 363, 518, 585
3P-3894 338 3T-8586 45, 230
3T-3207 341, 363, 364, 464, 480,
3P-3896 338, 580 3T-8590 45
501, 518, 562
3P-3897 338 3T-8597 45, 230
3T-3690 338, 358, 462, 472, 498,
3P-3898 338 580 3T-8601 6, 7, 8, 9, 10, 11, 41, 42,
43, 216, 217, 218, 227,
3P-4133 113, 372 3T-3799 135, 136, 514, 515, 516, 228, 229, 285, 287, 289,
537, 539, 540, 541, 542
3P-4134 344, 345 432, 433, 434, 468
3T-3800 135, 136, 514, 515, 516,
3P-4866 410 3T-9075 190, 197
537, 539, 540, 541, 542
3P-5757 332, 335, 355, 461, 496 3T-9118 144, 160, 161
3T-3884 6, 8, 9, 10, 41, 42, 43
3P-5762 332, 580 3T-9529 191
3T-3889 6, 8, 9, 10, 41, 42, 43, 216,
3P-5927 349 217 3T-9530 191
3P-6123 411 3T-4283 258, 259, 260, 261, 428 3T-9536 13, 14, 15, 17, 18, 46, 47,
50, 220, 232
3P-6954 415 3T-4427 340
3T-9538 22, 222, 298, 439, 457
3P-6955 415 3T-4428 340
3T-9548 191
3P-7153 331, 332, 333, 335, 336, 3T-5128 111
354, 355, 356, 460, 461, 3T-9875 53, 235, 482
3T-5631 43, 228
495, 496, 497, 553, 554, 3T-9877 53, 235, 482
579, 580 3T-5634 10, 217
3V-1133 345, 372, 506
3T-5970 409
3V-2711 319, 320, 446
3T-5971 409

645
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
3V-2712 318, 445 4H-9105 135, 341, 363, 383, 386, 4V-4106 321, 447
387, 388, 464, 537, 539,
3V-7851 329 540, 542, 557, 558, 559, 4V-4107 321, 447
3W-2301 47, 50 563, 564, 565 4V-5374 463
3W-4144 108, 109, 110, 111 4H-9527 257, 427 4V-5376 463
3W-4346 13, 14, 17, 18 4H-9628 257, 427 4V-7410 338, 462, 498
3W-7675 545 4I-7538 241, 242 5A-3187 240, 243, 244, 245, 246,
4K-0684 169, 184, 185, 190, 198, 418, 419, 420, 421, 422,
3W-7684 545 576, 577
199
3W-7687 545 5A-7524 69
4K-3916 319, 320, 446
3W-7691 545 5A-8374 341, 364, 464, 480, 501,
4K-3918 319, 320, 446
3W-7771 546 562, 581
4K-3919 318, 319, 320, 445, 446
3W-7772 546 5A-8375 51, 341, 364, 464, 479,
4K-5175 169, 184, 190 480, 501, 562
3W-7773 546
4K-5285 323, 448 5C-6565 98, 100, 101, 104, 105,
3W-7774 546 108, 109, 110, 138, 139,
4K-5286 323, 448 140, 141, 268, 270, 271,
3W-7778 524
4K-7038 240, 243, 244, 245, 246, 272, 301, 429, 440
3W-7779 524 247, 318, 319, 418, 419, 5F-3106 133, 136, 155, 156, 164,
420, 421, 422, 423, 445, 178, 399, 400, 403, 541,
3W-8120 525 446, 576, 577 569, 572
3W-8123 525 4K-7128 320 5F-3144 91, 385, 402, 521, 561, 571
3W-8134 524, 525, 526 4K-7348 329, 330 5F-3926 321
3W-8140 527 4K-9943 322, 323, 324, 447, 448 5F-7207 486
3W-8236 545 4K-9984 323, 448 5F-8000 90, 213, 360, 366, 367,
3W-8240 543, 544, 545 499, 503, 520, 522
4L-6454 268, 270, 271, 274, 275,
3W-8244 545 277, 278, 301, 305, 306, 5G-2247 6, 7, 8, 9, 10, 37, 38, 39,
429, 440, 441 40, 41, 42, 43, 66, 68, 69,
3W-8339 543
4M-0578 413, 414 70, 202, 208, 209, 216,
3W-8344 543, 544 217, 226, 227, 228, 240,
4M-0740 319, 320, 446 243, 245, 285, 287, 289,
3W-8396 523 290, 315, 331, 334, 346,
4M-5989 348, 349, 350, 351, 490,
3W-8398 523 347, 352, 353, 354, 355,
491, 492, 493, 583 418, 419, 421, 432, 433,
3W-8399 523 4M-5991 349, 351, 491, 493, 583 434, 442, 452, 453, 460,
462, 468, 469, 470, 471,
3W-8407 459, 483 4M-5992 351, 493, 583 488, 489, 494, 495, 509,
3W-8410 459, 483 4M-6953 136, 541 510, 511, 512, 553, 576,
579
3W-8489 527 4S-5898 136, 155, 164, 178, 403,
404, 521, 541, 572 5G-5965 279
3W-8492 527
4S-6559 56, 57, 58, 59, 60, 62, 238, 5G-5966 279
3W-8495 526, 527
345 5G-9660 483
3W-8536 484
4S-8072 413, 414 5G-9662 483
3W-8546 546
4S-8099 403 5H-0034 363
3W-8549 546
4S-8101 414 5H-1504 89, 90, 366, 387, 520, 522,
3W-8772 528 564, 585, 588
4S-8984 51, 88, 134, 135, 213, 341,
3W-8775 528 360, 363, 364, 366, 367, 5H-6734 53, 235, 404, 482
383, 384, 385, 386, 387,
4B-4278 283, 284 388, 401, 402, 464, 479, 5H-8848 19, 296, 326, 437, 449, 455
4B-4280 278, 329, 330 480, 499, 501, 503, 514, 5H-9107 322
517, 518, 522, 539, 540,
4B-6166 318, 319, 320, 445, 446 542, 557, 558, 559, 560, 5I-6125 4, 241, 242, 288
561, 562, 563, 564, 565,
4B-6620 396 5K-0216 13, 14, 15, 46, 47, 220, 232
570, 571, 572
4B-7255 402, 571 5K-0305 339, 340, 463, 478
4S-8994 538
4D-3704 330, 344, 345, 391, 451, 5K-1770 327, 438, 450, 456, 458
4S-9004 359
506
4S-9005 382 5K-2707 319, 320, 446
4F-7952 323, 324, 325, 448
4S-9049 386, 387, 388, 542, 563, 5K-3436 463
4F-8965 130 564, 565
4S-9112 398
4S-9692 385, 561

646
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
5K-6191 19, 20, 21, 221, 257, 293, 5M-2894 13, 14, 15, 17, 18, 22, 47, 5P-8247 13, 14, 16, 17, 18, 20, 21,
294, 296, 297, 322, 323, 50, 53, 76, 80, 81, 82, 83, 22, 47, 48, 49, 50, 51, 52,
324, 325, 326, 327, 339, 85, 87, 88, 91, 133, 204, 53, 57, 58, 59, 60, 62, 197,
340, 341, 342, 361, 362, 212, 220, 222, 231, 232, 199, 220, 221, 222, 232,
363, 368, 427, 436, 437, 235, 283, 295, 298, 367, 234, 235, 238, 258, 297,
438, 447, 448, 449, 450, 437, 439, 449, 455, 457, 298, 327, 342, 368, 438,
454, 455, 456, 458, 463, 482, 521 439, 450, 456, 457, 458,
464, 465, 475, 476, 477, 465, 481, 482, 504, 524,
478, 500, 504 5M-3022 382 581
5K-7128 328 5M-3038 403, 404 5P-8248 77, 78, 79, 80, 81, 82, 83,
5M-4436 367, 503 86, 87, 89, 91, 165, 231,
5K-7129 328 233, 235, 365, 502, 518,
5K-7138 329, 330 5M-4443 90, 213, 366, 367, 503, 519, 521, 546
520, 522
5K-7141 328 5P-8249 121, 122, 123, 124, 125,
5M-5000 253, 254, 255, 256, 293, 126, 127, 128, 129, 130,
5K-7142 328 294, 295, 322, 323, 324, 131, 132, 133, 153, 155,
383, 426, 436, 447, 448, 156, 164, 174, 178, 546,
5K-7143 192, 329, 330 454, 475, 476, 477, 478, 573
5K-7144 329, 330 514, 515, 516, 537, 557
5P-8250 183
5K-7247 329, 330 5M-5003 360, 499
5P-9532 412
5K-7305 330 5M-5004 360, 499
5P-9681 121, 123, 129
5K-7306 330 5M-5005 360, 499
5S-0122 397
5K-7315 330 5M-5009 360, 499
5S-0160 405, 406
5K-7316 330 5P-0233 410
5S-0161 405, 406
5K-8454 466, 505 5P-0373 253, 254, 258, 259, 260,
261, 426, 428 5S-0162 405
5K-8566 321, 446
5P-1075 268, 270, 271, 272, 281, 5S-0163 405
5K-9107 51, 88, 341, 363, 364, 464, 282, 301, 308, 309, 429, 5S-0709 332, 333, 335, 336, 354,
479, 480, 501, 517, 518, 430, 431, 440 355, 356, 461, 496, 497,
562
5P-1076 16, 49, 77, 78, 79, 97, 98, 554, 580
5K-9423 320 158, 159, 165, 171, 179, 5S-0710 332, 333, 335, 336, 354,
187, 200, 263, 264, 265, 355, 356, 461, 496, 497,
5K-9424 320 266, 267, 268, 269, 270, 554, 580
5K-9457 319, 446 271, 272, 273, 299, 300,
301, 303, 304, 429, 440, 5S-0726 338, 359, 556
5K-9458 319, 446 487, 515, 528, 543, 544
5S-0753 333, 336, 356, 497
5M-0627 342, 368, 465, 504 5P-2228 25, 55, 57, 58, 62, 159,
171, 179, 187, 200, 206, 5S-0754 333, 336, 356, 497
5M-0633 344, 371
214, 223, 224, 236, 237, 5S-0820 338, 358, 462, 555
5M-0634 344, 371 238, 459, 483
5S-0821 338, 358, 462, 555, 580
5M-0635 344, 371 5P-2546 150, 151, 152, 163, 175
5S-0822 338, 358, 462, 580
5M-0636 344, 371 5P-2566 310, 426
5S-0823 338, 358, 580
5M-1245 400 5P-3868 188, 189, 191
5S-0834 338, 359, 556
5M-1246 402 5P-4130 162
5S-1532 411
5M-1247 403 5P-4624 486
5S-4822 338, 556
5M-1667 411 5P-4625 29, 30, 31, 34, 225
5S-6513 345
5M-1669 402, 412, 571 5P-4683 240, 418
5S-6909 380, 381, 536
5M-1712 388, 404 5P-5422 183, 190
5S-6910 380, 381, 587
5M-1732 565 5P-6604 168
5S-6911 380, 381, 587
5M-1913 361, 362, 500 5P-6652 85
5S-7379 268, 270, 271, 272, 281,
5M-1914 341, 464 5P-7665 121, 149 282, 301, 308, 309, 429,
5M-2033 380, 552 5P-7971 57, 58, 59, 60, 62, 238 430, 431, 440

5M-2035 396 5P-8221 180, 182, 188, 189 5S-9876 406

5M-2043 51, 88, 134, 154, 341, 363, 5P-8222 188, 189 5S-9877 406
364, 384, 401, 464, 479, 5V-2906 291, 320
480, 501, 517, 518, 538, 5P-8245 136, 155, 156, 157, 164,
560, 562, 570 178, 186, 192, 251, 278, 5V-3842 321
279, 304, 305, 306, 425,
5M-2466 559 441, 541, 578 5V-3875 328, 451
5P-8246 250 5V-3876 328, 451
5Y-2373 144, 146, 147

647
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
6B-5278 244, 246, 247, 248, 420, 6I-9643 67 6P-7097 345
422, 423, 424, 577
6I-9644 67 6P-7100 345
6B-5502 332, 333, 335, 336, 337,
354, 355, 356, 357, 461, 6I-9653 67 6P-7614 390
496, 497, 554, 580 6I-9654 67 6P-7622 390
6B-5882 380, 552 6I-9655 67 6P-7623 390
6B-6682 329 6I-9656 67 6P-7625 389
6C-9149 212 6I-9668 66, 353 6P-7626 389
6F-7030 154, 570 6I-9670 66 6P-7627 389
6G-0712 206, 207, 214, 215 6I-9671 66, 208, 210, 353 6P-7691 406
6H-1309 197, 411, 413, 414 6I-9719 178 6P-7692 406
6H-1717 345, 372, 506 6I-9912 119 6P-7693 406
6H-2953 135, 386, 387, 388, 539, 6J-1536 129 6P-7694 406
540, 542, 563, 564, 565
6J-4081 206, 207 6P-8803 390
6H-3977 154, 412
6K-0137 330, 451 6P-8804 390
6H-6237 404, 572
6K-1261 498 6P-8806 390
6H-7382 20, 21, 52, 205, 221, 233,
234, 297, 327, 342, 368, 6K-1330 77, 78, 85, 86, 87 6P-8912 80, 81, 82, 83, 91, 130,
438, 450, 456, 458, 465, 131, 132, 133, 136, 156,
6K-1910 338, 358, 462, 472, 498 164, 178, 204, 212, 231,
481, 504
6K-1981 321 521, 541
6I-8060 375, 378, 530, 532, 549,
551 6K-3772 125, 127 6P-9107 397, 398
6I-8061 347, 352, 489, 494, 510, 6K-5640 29, 30, 31, 33, 34, 225 6S-3142 248, 424
511
6K-6444 573 6S-3143 248, 424
6I-8077 46
6K-7917 192 6S-3144 248, 424
6I-8139 106, 108
6K-9860 19, 257, 296, 326, 427, 6S-3145 247, 248, 423, 424
6I-8141 95, 97 437, 449, 455 6S-3146 244, 246, 247, 248, 420,
6I-8142 95, 97 6K-9861 19, 257, 296, 326, 427, 422, 423, 424, 577
437, 449, 455 6S-3147 248, 424
6I-8665 160
6K-9880 19, 296, 326, 437, 449, 455 6S-3148 248, 424
6I-8691 161
6L-9210 585 6S-3149 250, 425
6I-8736 95, 96, 97, 98
6L-9211 588 6S-3171 258, 259, 260, 261, 428
6I-8737 95, 96, 97, 98
6L-9965 411, 413, 414 6S-3172 258, 259, 260, 261
6I-8780 320, 446, 453
6M-2001 214, 215 6S-3178 246, 247, 248, 422, 423,
6I-8835 160
6M-9613 271, 274, 275, 278, 429 424
6I-8837 160
6P-0549 407 6S-3179 247, 248, 423, 424
6I-8839 147
6P-2083 399, 400, 569 6S-3284 252, 255, 426
6I-8842 161
6P-2647 381 6S-3285 252, 255
6I-9024 98
6P-2648 381 6S-3419 248, 424
6I-9029 107, 109
6P-2786 381 6S-3422 250, 425
6I-9034 113
6P-3068 381, 536, 554 6S-3423 250, 425
6I-9036 110
6P-3069 381, 536, 554 6S-3429 278, 279
6I-9053 110
6P-3303 403 6S-3451 254, 426
6I-9109 67
6P-3307 403 6S-3453 254, 426
6I-9239 114
6P-3596 397 6S-3495 252, 253, 254, 258, 259,
6I-9240 114 260, 261, 426, 428
6P-4234 332, 333, 335, 336, 354,
6I-9241 114, 116, 533 6S-3609 257, 427, 578
355, 356, 461, 496, 497,
6I-9242 114, 116, 533 554 6S-3697 253, 254, 255, 426
6I-9243 114 6P-4235 349, 351, 491, 493 6S-3747 283, 284
6I-9244 114 6P-4236 377, 379, 534, 535, 550 6S-3765 278
6I-9573 12, 290 6P-4897 403 6S-3766 278
6I-9641 67 6P-4898 403 6S-3767 278

648
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
6S-3768 278 6T-1355 133 6V-2149 161
6S-6272 283, 284 6T-1441 118 6V-2475 190, 197
6S-6273 283, 284 6T-2162 66, 70, 118 6V-2614 169, 184, 191
6S-6316 283, 284 6T-2619 17, 18, 220 6V-2615 190, 197
6S-6326 283, 284 6T-2620 17, 18, 220 6V-2698 169, 184, 191
6S-6405 284 6T-2638 172, 173 6V-2699 17, 18, 22, 50, 53, 220,
222, 232, 235, 298, 439,
6S-6665 283 6T-3220 80, 81, 82, 83 457, 482
6S-6667 283 6T-3284 50, 232 6V-2700 150, 152, 157, 163, 170,
6S-6741 281, 282, 308, 309, 430, 6T-3285 50, 232 175, 186
431 6V-2701 80, 81, 82, 83, 91, 130,
6T-4139 262
6S-6887 245, 246, 421, 422 131, 132, 133, 136, 156,
6T-4504 177 164, 178, 204, 212, 231,
6S-6888 245, 246, 421, 422 521, 541
6T-4861 91, 521
6S-6889 245, 246, 421, 422 6V-3303 52, 481
6T-4871 80, 81, 82, 83, 130, 131,
6S-6890 245, 246, 421, 422 132, 133, 136, 156, 164, 6V-3531 206, 207, 212, 214, 215
178, 204, 212, 231, 541
6S-7038 258, 259, 260, 261, 428 6V-3669 205
6T-4964 170, 185
6S-7040 258, 259, 260, 261, 428 6V-4316 12, 219, 291, 292
6T-4965 170
6S-7123 249, 425 6V-4791 19, 257, 296, 326, 427,
6T-5114 136, 541 437, 449, 455, 538, 560
6S-7124 249, 425
6T-5245 190, 197 6V-5841 121, 149
6S-7220 426
6T-5246 169, 184, 191 6V-5845 90, 213, 520
6S-7715 252, 253, 254, 255, 258,
259, 260, 261, 426, 428 6T-5247 150, 152, 157, 163, 170, 6V-6768 20, 21, 221, 297, 438, 456
175, 186
6S-7780 250 6V-7675 16
6T-5857 409
6S-8084 247, 423 6V-8133 539
6T-5858 409
6S-8085 247, 423 6V-8181 108, 109, 110, 111
6T-6781 410, 411
6S-8094 321 6V-8182 547
6T-6782 568
6S-8343 245, 246, 247, 421, 422, 6V-8188 271, 274, 275, 277, 278,
423 6T-7405 148, 162 305, 306, 441
6S-8344 245, 246, 247, 421, 422, 6T-7455 498 6V-8197 259, 260, 261, 578
423
6T-7456 498 6V-8237 539, 541
6S-8814 249, 425
6T-7500 156, 164 6V-9167 80, 81, 82, 84, 212
6S-8815 249, 425
6T-8049 193 6Y-0216 190
6S-8823 249, 425
6T-8050 193 6Y-0236 190
6S-8824 249
6T-8520 193, 195 6Y-0469 146, 147
6S-9049 240, 243, 245, 418, 419,
421, 576 6T-8521 193, 195 6Y-0470 167, 172
6S-9051 245, 421 6T-8853 193, 195 6Y-0471 180, 188
6S-9057 249, 425 6V-0937 46, 75, 203, 210, 211, 230, 6Y-0472 193, 195
291, 292, 434, 435, 473,
6S-9059 249 474
6S-9102 249, 424 6V-1723 114, 116, 144, 146, 147,
160, 161, 533
6S-9115 249, 424
6V-1724 144, 146, 147, 160, 161
6S-9561 246, 247, 248, 422, 423,
424 6V-1725 114, 144, 146, 147, 160,
161
6S-9627 278
6V-1726 163, 166, 167
6S-9628 278
6V-1728 166, 167, 172, 173
6T-0232 12
6V-1792 37, 38, 39, 40, 44, 66, 68,
6T-0253 45 70, 71, 118, 202, 203, 208,
6T-0720 91, 521 209, 210, 226, 229, 353,
469, 470, 512
6T-0729 536
6V-1793 118
6T-1139 163, 170, 186
6V-1914 515, 516
6T-1140 153, 155, 156, 164, 178
6V-1915 515, 516

649
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
6Y-0473 6, 7, 8, 9, 10, 13, 14, 15, 6Y-0940 240, 243, 244, 418, 419, 6Y-2904 367, 503
17, 18, 20, 21, 22, 37, 38, 420
39, 40, 41, 42, 43, 46, 47, 6Y-2946 157, 170
50, 52, 53, 66, 68, 69, 70, 6Y-1081 146, 147
6Y-2948 170
76, 80, 81, 82, 83, 84, 85, 6Y-1082 193, 195
87, 90, 91, 114, 116, 117, 6Y-2949 170
118, 121, 122, 123, 124, 6Y-1138 118
6Y-2950 170
125, 126, 127, 128, 129, 6Y-1139 118
130, 131, 132, 133, 135, 6Y-2951 170
136, 144, 146, 147, 150, 6Y-1141 118
151, 152, 153, 155, 156, 6Y-2952 170
157, 160, 161, 163, 164, 6Y-1244 252, 425
6Y-2953 170
166, 167, 169, 170, 172, 6Y-1328 249, 424
173, 175, 176, 178, 180, 6Y-3879 10, 217
182, 184, 185, 186, 188, 6Y-1329 249, 424
189, 190, 191, 193, 195, 6Y-3880 43, 228
197, 199, 202, 204, 205, 6Y-1381 249, 424, 577
6Y-3908 51, 479
208, 209, 212, 213, 216, 6Y-1382 249, 424, 577
217, 220, 221, 222, 226, 6Y-3914 144, 146, 147, 160
227, 228, 231, 232, 233, 6Y-1383 249, 424
6Y-3917 62, 238
234, 235, 240, 243, 245, 6Y-1384 249, 424
256, 285, 287, 289, 290, 6Y-3921 62, 238
293, 294, 297, 298, 315, 6Y-1385 249, 424, 577
322, 327, 331, 334, 342, 6Y-4006 158
346, 347, 352, 353, 354, 6Y-1386 249, 424, 577
6Y-4124 145
355, 366, 367, 368, 374, 6Y-1577 182, 189
375, 378, 386, 387, 388, 6Y-4744 253, 254, 256, 258, 259,
392, 394, 408, 418, 419, 6Y-1578 182, 189 260, 261, 426, 428
421, 426, 432, 433, 434,
436, 438, 439, 442, 447, 6Y-1579 180, 188 6Y-5026 555, 556
450, 452, 453, 454, 456, 6Y-1589 249, 424 6Y-5185 472
457, 458, 460, 462, 465,
468, 469, 470, 471, 481, 6Y-1590 249, 424 6Y-5186 472
482, 488, 489, 494, 495, 6Y-1596 249, 424, 425 6Y-5344 249, 577
503, 504, 509, 510, 511,
512, 514, 515, 516, 520, 6Y-1597 249, 424, 425 6Y-5345 249, 577
521, 522, 529, 530, 531,
532, 533, 537, 539, 540, 6Y-1711 244, 420, 577 6Y-5405 42, 228
541, 542, 548, 549, 551, 6Y-1713 420, 577 6Y-5406 70
553, 563, 564, 565, 567,
572, 576, 579, 582, 586 6Y-1717 244, 420, 577 6Y-5412 42
6Y-0553 150, 151, 153 6Y-1756 130, 131, 132 6Y-5413 228
6Y-0556 150, 152, 153, 163 6Y-1757 121, 122, 123, 124, 125, 6Y-5414 42
126, 127, 128, 129, 130,
6Y-0846 35, 467 131, 132 6Y-5499 251, 425
6Y-0891 186 6Y-1781 88, 517 6Y-5624 12, 219, 290
6Y-0892 186 6Y-2043 51, 88, 479, 517 6Y-5661 454
6Y-0893 186 6Y-2057 180, 182 6Y-5905 534
6Y-0925 88, 134, 341, 360, 363, 6Y-2110 256, 426 6Y-5906 535
364, 366, 367, 383, 384,
385, 386, 387, 388, 401, 6Y-2141 166, 167 6Y-6116 541
402, 404, 464, 479, 480, 6Y-6285 74
499, 501, 503, 517, 518, 6Y-2146 166
522, 538, 542, 557, 558, 6Y-2147 166 6Y-6286 74, 210
559, 560, 561, 562, 563,
6Y-2150 161 6Y-6287 74, 210
564, 565, 570, 571, 572
6Y-2270 292, 293 6Y-6289 358, 513, 584
6Y-0929 42, 43, 228
6Y-2327 408 6Y-6290 358, 513, 584
6Y-0930 70
6Y-2328 408 6Y-6291 75, 358, 584
6Y-0935 240, 243, 244, 418, 419,
420, 576, 577 6Y-6292 74, 75, 358, 584
6Y-2508 191
6Y-0936 240, 243, 244, 418, 419, 6Y-6293 75, 358, 584
6Y-2534 183
420, 576, 577
6Y-2536 183 6Y-6294 74, 75, 210, 358, 584
6Y-0937 240, 243, 244, 418, 419,
420 6Y-2592 530 6Y-6295 75, 358, 584
6Y-0938 240, 243, 244, 418, 419, 6Y-2593 530, 534 6Y-6296 74, 75, 210, 358, 584
420 6Y-6297 75, 358
6Y-2594 530, 534
6Y-0939 240, 243, 244, 418, 419, 6Y-6298 74, 75, 358
420 6Y-2887 166
6Y-2902 367, 503 6Y-6299 75, 358

650
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
6Y-6300 74, 75, 358 6Y-9934 34, 225 7G-6442 144, 146, 147, 160, 161
6Y-6380 224 6Y-9935 34, 225 7G-6448 148, 162
6Y-6381 224 6Y-9939 31 7G-6454 148, 162
6Y-6382 214, 223, 224 6Y-9949 31 7G-7150 168
6Y-6383 214, 223, 224 6Z-8243 130 7G-7198 166
6Y-6389 74 7B-1115 197 7G-8400 372
6Y-6390 74 7B-1756 329, 330 7G-8513 369
6Y-6391 74 7B-3235 343, 369, 370 7G-8517 369
6Y-6392 74, 75, 358, 513 7B-7889 344, 371 7G-8524 370
6Y-6393 75, 358, 513 7B-7890 344, 371 7G-8527 372
6Y-6394 74, 75, 358, 584 7B-7891 344, 371 7G-8528 372
6Y-6395 75, 358, 584 7B-7892 344, 371 7G-8532 372
6Y-6397 74, 75, 358, 584 7C-8246 271 7G-8533 372
6Y-6398 75, 358, 584 7D-1649 15, 48 7G-8534 370
6Y-6401 75, 358 7D-5238 197 7G-8535 371
6Y-6402 381 7D-8508 138, 139, 140, 141, 142, 7G-8536 371
143
6Y-6404 74, 75, 358 7G-8539 371
7D-9749 258, 259, 260, 261, 428
6Y-6405 75, 358 7G-8549 370
7F-8267 20, 21, 52, 205, 221, 233,
6Y-6411 75, 358, 584 234, 292, 293, 294, 295, 7G-8807 413
6Y-6412 74, 75, 358, 584 297, 312, 322, 327, 339, 7G-8808 413
340, 342, 361, 362, 363,
6Y-6481 41, 42, 227, 228, 468 368, 438, 447, 450, 454, 7G-8809 403
456, 458, 463, 465, 478,
6Y-6486 8, 9, 217, 285, 287, 432, 7G-8810 403
481, 500, 504
433
7H-2621 412
7F-8268 475, 476, 477
6Y-6743 347, 349, 489, 491
7H-2623 154, 412
7G-0343 166, 167, 172, 173
6Y-6744 347, 349, 489, 491
7H-3597 290, 315, 316, 317, 331,
7G-0418 366, 522
6Y-6745 347, 349, 489, 491 332, 333, 334, 335, 336,
7G-1901 383, 557 337, 354, 355, 356, 357,
6Y-6746 347, 349, 489, 491 442, 443, 444, 452, 453,
7G-1902 383, 557 460, 461, 462, 471, 495,
6Y-6747 352, 494, 510, 511
7G-2762 414 496, 497, 553, 554, 579,
6Y-6748 352, 494, 510, 511 580
7G-2763 414
6Y-6749 352, 494, 510, 511 7H-3598 374, 375, 376, 377, 378,
7G-3431 189 379, 396, 531, 532, 535,
6Y-6750 352, 494, 510, 511 548, 549, 550, 551, 586
7G-3766 168
6Y-7652 402, 571 7H-3599 114, 116, 117, 394, 395,
7G-4332 20, 21, 22, 52, 53, 90, 91, 529, 530, 533, 534, 567,
6Y-8973 74 114, 116, 117, 118, 135, 568
6Y-9024 63, 64, 507, 508 136, 144, 146, 147, 160,
161, 166, 167, 172, 173, 7H-3607 12, 46, 75, 203, 210, 211,
6Y-9261 8, 9, 217, 218, 285, 287, 180, 182, 188, 189, 193, 219, 230, 291, 292, 311,
432, 433 195, 205, 213, 221, 222, 338, 359, 435, 454, 473,
6Y-9262 8, 9, 217, 218, 285, 287, 233, 234, 235, 256, 293, 474, 498, 513, 556, 581,
432, 433 294, 295, 297, 298, 322, 584
327, 342, 366, 367, 368,
6Y-9263 8, 9, 217, 285, 287, 432, 374, 375, 378, 386, 387, 7H-3608 121, 149, 162, 359, 381,
433 388, 392, 394, 408, 426, 382, 537, 555, 556, 584,
436, 438, 439, 447, 450, 587
6Y-9264 8, 9, 217, 285, 287, 432, 454, 456, 457, 458, 465,
433 7H-3609 168, 174, 397, 398, 568
481, 482, 503, 504, 514,
6Y-9267 42, 228 515, 516, 520, 521, 522, 7H-4566 385, 561
529, 530, 531, 532, 533,
6Y-9268 42, 228 7H-4571 51, 88, 134, 384, 385, 479,
537, 539, 540, 541, 542, 517, 538, 560, 561
548, 549, 551, 563, 564,
6Y-9416 45, 230, 472 565, 567, 572, 586 7H-4573 385, 561
6Y-9474 218 7G-4355 106, 107, 108, 109, 110, 7H-4574 51, 88, 134, 384, 385, 479,
6Y-9925 25 111 517, 538, 560, 561
6Y-9926 25 7G-4829 22, 222, 298, 439, 457 7J-2036 76, 80, 81, 82, 83, 84, 85,
87, 121, 122, 123, 124,
6Y-9932 30 7G-4832 22, 222, 298, 439, 457 125, 126, 127, 128, 129,
6Y-9933 30 7G-4833 22, 222, 298, 439, 457 130, 155, 164, 178, 212

651
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
7K-1089 293, 294, 322, 323, 324, 7P-7208 459, 483 7T-1094 80, 81, 82, 83, 91, 131,
325, 327, 436, 447, 448, 132, 133, 136, 156, 164,
450, 454, 458 7P-7368 485, 486 178, 212, 231, 521, 541
7K-1311 498 7P-7369 486 7T-1158 191
7K-1548 321, 446 7P-7373 486 7T-1243 196
7K-1825 318, 445 7P-7430 527 7T-1248 174
7K-1826 318, 445 7P-7431 527 7T-1312 381, 554
7K-2016 318, 445 7P-7732 487 7T-1313 381, 554
7K-2017 240, 243, 244, 245, 246, 7P-7911 478 7T-1315 454
247, 318, 319, 418, 419, 7P-7912 478
420, 421, 422, 423, 445, 7T-1825 191
446, 576, 577 7P-9246 545 7T-1826 191
7K-2018 316, 317, 318, 443, 444, 7P-9250 545 7T-2275 172
445 7R-8872 184, 185, 199 7T-2276 172
7K-2019 318, 445 7S-0706 338, 580 7T-2282 119, 148
7K-2020 317, 318, 444, 445 7S-7936 403 7T-2283 166, 167, 172, 173
7K-2049 318 7S-7975 415 7T-2288 174
7K-2051 445 7S-8011 415 7T-2289 173
7K-2943 328, 451 7S-8012 415 7T-2294 174
7K-2944 328, 451 7S-8013 415 7T-2310 162
7K-2961 328, 451 7S-8213 345 7T-2390 148, 162
7K-2962 328, 451 7S-8214 345 7T-2392 148, 162
7K-3703 466, 505 7S-9093 568 7T-2394 148, 162
7K-3704 466, 505 7S-9096 568 7T-2582 191
7K-3711 466, 505 7S-9181 394, 395, 567, 568 7T-2750 119, 148
7K-3712 466, 505 7S-9182 394, 395, 567, 568 7T-2770 175, 176
7K-3713 466, 505 7S-9294 409 7T-3501 339, 463, 475, 477, 478
7K-3714 466, 505 7S-9567 338, 580 7T-3940 119, 148
7K-4347 506 7S-9601 394, 395, 567, 568 7T-4030 17, 18, 22, 50, 53, 220,
7K-4438 330 222, 232, 235, 298, 439,
7S-9602 394, 395, 567, 568
7K-4439 451 457, 482
7S-9603 394, 395, 567, 568
7K-5448 154, 401, 570 7T-4031 91, 521
7S-9604 394, 395, 567, 568
7K-5449 154, 401, 570 7T-4080 17, 18, 22, 50, 53, 220,
7T-0157 169, 184, 191 222, 232, 235, 298, 439,
7M-1889 391 457, 482
7T-0158 80, 81, 82, 83, 91, 130,
7M-1890 391 131, 132, 133, 136, 156, 7T-4086 17, 18, 22, 50, 53, 220,
164, 178, 204, 212, 231, 222, 232, 235, 298, 439,
7M-2560 371 521, 541 457
7M-2561 371 7T-0159 150, 152, 157, 163, 170, 7T-4087 17, 18, 22, 50, 53, 220,
7M-2562 371 175, 186 222, 232, 235, 298, 439,
457
7M-3308 388, 565 7T-0160 197
7T-4101 91, 521
7M-3309 388, 565 7T-0353 301
7T-4106 91, 521
7M-5112 387, 564 7T-0715 180
7T-4137 167
7M-8056 399, 400 7T-0716 180
7T-4138 167
7P-4695 524, 525, 526, 527 7T-0723 181
7T-4152 91, 521
7P-4699 527 7T-0724 183
7T-4173 452
7P-5943 547 7T-0737 119, 148
7T-4174 452
7P-5948 547 7T-0961 184, 185
7T-4175 452
7P-5952 543, 546, 547 7T-0998 180, 182
7T-4176 452
7P-6570 523, 524 7T-0999 180, 182
7T-4177 452
7P-6594 524 7T-1000 180, 182
7T-4178 452
7P-6595 524 7T-1093 150, 152, 157, 163, 170,
175, 186 7T-4509 383, 537, 557, 558, 559

652
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
7T-4539 334, 462, 471 7X-0318 514, 515, 516 7X-7729 282, 283, 307, 308
7T-4540 334, 462, 471 7X-0343 137, 271, 486, 527 7X-8268 19
7T-4541 334, 462, 471 7X-0344 187, 527 7Y-5233 99, 100, 101, 102, 103,
104, 105, 112
7T-4542 334, 462, 471 7X-0345 158, 179, 200
8A-1378 463
7T-4543 334, 462, 471 7X-0346 527
8C-3435 190
7T-4544 334, 462, 471 7X-0347 57, 58, 59, 60, 61, 62, 237,
238, 527 8C-4436 100, 101, 104, 105, 108,
7T-4562 360, 499, 514, 516, 585 109, 110, 111, 158
7X-0349 253, 254, 256
7T-4605 183 8C-6857 100, 101, 104, 105, 108,
7X-0350 200 109, 110, 111, 112, 113,
7T-4607 183
7X-0351 268, 270, 271, 272, 429 179
7T-4608 181
7X-0353 301, 440 8C-6877 126, 128, 153, 176, 253,
7T-4628 290, 315, 442, 452, 453 254, 255, 256, 293, 294,
7X-0368 545 426, 436, 454
7T-4636 331, 334, 354, 355, 460,
462, 471, 495, 553, 579 7X-0380 545, 547 8C-6913 138, 139, 140, 141, 142,
143, 171, 177, 187, 545,
7T-4645 352, 494, 510, 511, 582, 7X-0382 547 547
583
7X-0383 138, 139, 140, 141, 142, 8C-8478 524, 525, 526
7T-4646 352, 494, 510, 511, 582, 143, 158
583 8E-0281 53, 235, 482
7X-0384 547
7T-4657 378, 532, 551 8E-0301 235
7X-0385 545
7T-4658 378, 532, 551 8E-0398 154
7X-0386 171, 187
7T-4659 378, 532, 551 8E-0399 154
7X-0393 177
7T-4660 378, 532, 551 8E-0400 154
7X-0434 198
7T-4661 378, 532, 551 8E-0855 350, 351, 492, 493, 583
7X-0444 170, 185
7T-4662 378, 532, 551 8E-0885 42, 228
7X-0448 253, 254, 256, 527
7T-4700 159 8E-0886 42, 228
7X-0471 277, 278
7T-4722 80, 81, 82, 83, 91, 212, 8E-0887 42, 228
231, 521, 541 7X-0488 486
8E-0888 42, 228
7T-5125 150, 152, 157, 163, 170, 7X-0515 524, 525
175, 186 8E-2355 70
7X-0533 198
7T-5133 131, 132, 133, 136, 156, 8E-2356 70
7X-0550 26, 28, 272, 273, 303, 304
164, 178 8E-2357 70
7X-0563 454, 475, 476, 477, 478,
7T-5419 179 514, 515, 516, 537 8E-2358 70
7T-5510 159, 165 7X-0583 253, 254, 256 8E-2359 70
7T-5959 171, 187 7X-0584 282, 283, 307, 308, 310, 8E-2360 70
7T-5968 119, 148 426
8E-4007 204, 231
7T-5969 119, 148, 536 7X-0590 138, 139, 140, 141
8E-4008 204, 231
7T-7054 146, 147 7X-0591 271
8E-4015 231
7T-7629 166 7X-0612 190
8E-4017 204, 231
7T-7630 166 7X-0618 253, 254, 255, 256, 293,
294, 426, 436 8E-4023 231
7T-7666 166 8E-4055 408, 409
7X-2475 484
7T-9307 159, 165, 179 8E-4056 408, 409
7X-2553 303, 304, 523, 525, 526,
7T-9309 171, 187 527 8E-4057 408, 409
7T-9311 192, 200 7X-2554 476, 523 8E-4058 408, 409
7T-9355 120 7X-2556 263, 264, 265, 266, 267, 8E-4059 144, 160, 161
269
7T-9825 117, 529, 530, 534 8E-4060 144, 160, 161
7X-2559 485
7V-3687 330, 451 8E-4061 146, 147
7X-2562 543, 544
7X-0288 268, 270, 429 8E-4062 146, 147
7X-2563 524, 525, 526, 527, 546
7X-0289 271 8E-4160 42
7X-2564 543
7X-0307 159 8E-4272 376, 377, 379, 534, 535,
7X-2576 544 550
7X-0310 537
7X-3328 34, 225 8E-4273 534
7X-0311 475, 476, 477, 478
7X-3335 265, 275, 276, 277

653
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
8E-4326 70 8E-4974 45 8E-9562 537
8E-4327 70 8E-4976 120 8E-9635 59
8E-4328 70 8E-5257 347, 352, 489, 494, 510 8E-9636 59
8E-4365 359, 498, 513 8E-5258 378, 530, 532, 551 8E-9704 31
8E-4416 120, 535 8E-5281 471 8E-9705 31
8E-4417 120, 535 8E-6114 74, 513 8E-9763 62, 238
8E-4418 535 8E-6573 22, 222, 298, 439, 457 8E-9766 25
8E-4419 535 8E-6619 121, 122, 123, 124, 125, 8E-9767 25
126, 127, 128, 129, 130,
8E-4424 381, 555 131, 132, 150, 151, 152, 8E-9799 119, 148, 162
8E-4425 120 153, 157, 163, 170, 175, 8E-9810 12
176, 186
8E-4427 120, 535 8E-9812 12, 290
8E-6643 178
8E-4432 380, 381, 536 8E-9814 12
8E-6644 191, 199
8E-4433 381, 536 8E-9816 12, 290
8E-6653 191
8E-4434 380, 381, 536, 554, 587 8E-9820 42
8E-6661 170
8E-4435 381, 536, 554, 587 8E-9821 45
8E-6977 513
8E-4436 380, 381, 536, 554, 587 8E-9823 45
8E-6978 513
8E-4437 381, 536, 554, 587 8E-9825 45
8E-7222 66, 208, 353
8E-4457 144, 146, 147, 160, 161 8E-9827 45
8E-7342 256, 426
8E-4458 144, 146, 147, 160, 161 8E-9922 98
8E-7343 256, 426
8E-4494 358, 513 8E-9923 98
8E-7405 66, 71, 208, 209, 210, 353
8E-4495 358, 513 8E-9928 107, 109
8E-7406 66, 71, 208, 209, 210, 353
8E-4496 75, 358, 513 8E-9932 99, 100, 101, 102, 103,
8E-7407 66, 68, 71, 208, 209, 210, 104, 105, 106, 107, 108,
8E-4497 74, 75, 358, 513 353, 512 109, 110
8E-4498 74, 513 8E-7408 66, 68, 71, 208, 209, 210, 8F-0737 154, 412
353, 512
8E-4499 358, 513, 584 8F-1190 572
8E-7409 66, 71, 208, 209, 210, 353
8E-4500 358, 513, 584 8F-6711 135, 383, 386, 387, 388,
8E-7410 66, 71, 208, 209, 210, 353 404, 539, 540, 542, 557,
8E-4501 358, 497, 584
8E-7510 133, 136, 155, 156, 164, 558, 559, 563, 564, 565,
8E-4502 358, 497, 513, 584 572
178, 541, 572
8E-4505 144, 160, 161 8F-8733 169, 184, 185, 191, 199
8E-7699 145
8E-4506 144, 160, 161 8F-9516 150, 151, 152, 153, 157,
8E-7700 145
163, 170, 175, 176, 186
8E-4513 146, 147 8E-7899 293, 294, 322, 436, 447,
454 8G-0980 545
8E-4514 146, 147
8E-8323 120, 535 8G-1450 515, 516
8E-4519 160, 161
8E-8324 120, 380, 535, 536 8G-2049 547
8E-4520 160, 161
8E-8325 380, 381, 536 8G-3170 454
8E-4722 338, 358, 472
8E-8326 381, 536 8G-3172 454
8E-4723 338, 358, 472
8E-8327 120 8G-3351 545
8E-4724 338, 462, 472, 498, 555
8E-8522 230 8G-4077 486
8E-4725 338, 358, 462, 472, 498,
555, 580 8G-5258 27, 56, 57, 58, 59, 60, 61,
8E-8523 230
62, 237, 238
8E-4727 338, 358, 462, 498 8E-8526 12, 219
8G-5335 62, 238
8E-4728 338, 358, 462, 498 8E-8527 12, 219
8G-6044 547
8E-4729 338 8E-8648 121, 122, 125, 126, 130,
131, 133 8G-6045 547
8E-4799 291, 320, 453
8E-8783 59, 60 8G-6048 545, 547
8E-4800 291, 320, 453
8E-9037 66, 71 8G-6781 459
8E-4805 320, 446, 453
8E-9039 67 8G-6792 459
8E-4807 320, 446, 453
8E-9396 148 8G-6793 459
8E-4808 320, 446, 453
8E-9399 119, 148 8G-6921 483
8E-4972 12
8G-6926 483

654
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
8G-6927 483 8M-6041 339, 359 8P-7003 17, 18, 22, 50, 53, 220,
222, 232, 235, 298, 439,
8G-7148 527 8M-6238 534, 535 457, 482
8G-7149 527 8M-6239 376, 377, 379, 534, 535, 8P-8489 566
550
8G-7150 527 8P-8490 566
8M-7229 396
8G-7575 524 8P-9453 338, 359, 556
8M-7230 396
8G-7576 527 8P-9454 359, 498
8M-7231 348, 349, 350, 351, 380,
8G-8031 545, 546 396, 490, 491, 492, 493, 8S-0009 413
8G-8047 547 552, 583
8S-0377 338
8G-8050 547 8M-7232 396
8S-0385 568
8G-9530 80, 81, 82, 83, 84 8M-7288 380, 552
8S-0390 568
8G-9824 111 8M-7289 380, 552
8S-0391 568
8H-1383 140, 141 8M-7290 350, 351, 380, 492, 493,
552, 583 8S-0395 394, 395, 567, 568
8H-2262 51, 88, 134, 169, 184, 191, 8S-0396 395
341, 360, 363, 364, 366, 8M-7454 337, 357
367, 383, 384, 385, 386, 8M-7455 337, 357 8S-0943 408, 409
387, 388, 401, 402, 404,
464, 479, 480, 499, 501, 8M-7456 333, 336, 337, 356, 357, 8S-0944 408, 409
503, 514, 515, 516, 517, 497 8S-1723 408, 409
518, 522, 537, 538, 542,
557, 558, 559, 560, 561, 8M-7457 337, 357 8S-1724 409
562, 563, 564, 565, 570, 8P-0021 150, 152, 157, 163, 170, 8S-1725 409
571, 572 175, 186
8S-1726 409
8H-2265 256, 399, 400, 403, 412, 8P-0429 381
426, 569 8S-1731 409
8P-0430 380, 381
8H-5375 404 8S-2548 338
8P-0622 555
8H-5376 404 8S-2560 339, 361, 463, 500, 581
8P-1473 568
8H-5377 404 8S-2589 375, 377, 379, 535, 549,
8P-1851 359 550, 586
8H-5380 404
8P-5197 90, 213, 360, 366, 367, 8S-2590 375, 377, 379, 535, 549,
8H-5381 404 499, 503, 514, 515, 516, 550, 586
8H-5411 561 520
8S-2931 386, 387, 388, 542, 563,
8H-5412 561 8P-5394 572 564, 565
8H-5724 250, 251, 320, 425, 578 8P-5429 413, 414 8S-2981 338, 358
8H-6392 571 8P-5430 411, 413, 414 8S-3887 305, 306, 441
8H-6393 571 8P-5434 411, 413, 414 8S-4458 409
8H-7504 248, 320, 424 8P-5485 413, 414 8S-4462 409
8K-0589 213 8P-5486 413, 414 8S-4468 381, 554, 555
8L-5560 247, 248, 423, 424 8P-5604 413 8S-5653 154, 256, 399, 400, 403,
8P-5605 413 412, 426, 569
8M-0341 383, 558
8P-5689 380, 552 8S-5654 366, 367, 503, 522
8M-0342 383, 558
8P-6188 51, 88, 341, 363, 364, 464, 8S-5656 154, 256, 399, 400, 403,
8M-0343 383, 558, 559 412, 426, 569
479, 480, 501, 517, 538,
8M-0344 383, 558 560, 562 8S-5796 368, 504
8M-0383 571 8P-6245 401, 570 8S-7027 409
8M-2619 393, 395, 568 8P-6255 401, 570 8S-9092 234, 342, 368, 465, 481,
8M-2620 393, 395, 568 8P-6256 401, 570 504, 581

8M-4390 135, 383, 386, 387, 388, 8P-6650 399, 400, 403, 569 8T-0088 258
539, 540, 542, 557, 558, 8T-0281 19, 51, 480, 482
559, 563, 564, 565, 572 8P-6651 383, 386, 387, 388, 522,
537, 539, 540, 542, 557, 8T-0282 13, 14, 17, 18, 47, 50
8M-4395 514 558, 559, 563, 564, 565
8T-0357 20, 21, 258, 297
8M-4436 360, 366, 367, 499, 503, 8P-6652 52, 205, 233, 234, 339,
522 340, 342, 361, 362, 463, 8T-0359 48, 49
465, 475, 476, 477, 478,
8M-5661 327, 339, 340, 342, 361, 8T-0360 89, 518, 519, 521
481, 500
362, 368, 438, 450, 456, 8T-0655 204
458, 463, 465, 475, 476, 8P-7002 13, 14, 15, 17, 18, 22, 220,
477, 478, 500, 504 222, 298, 439, 457 8T-0656 77, 78, 85, 87

655
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
8T-0657 79, 85 8T-4192 23, 24, 54, 56, 57, 265, 8T-8917 29, 30, 31, 57, 58, 59, 60,
282, 283, 307, 308, 484, 206, 207, 214, 215, 274,
8T-0667 541 485, 487, 524, 525, 526, 275, 277, 278, 281, 282,
8T-0722 261, 302 528 305, 306, 308, 309, 429,
430, 431, 441
8T-2272 80, 81, 82, 83, 91, 212, 8T-4193 524, 527
231, 521, 541 8T-8919 97, 98, 274, 275, 305, 306,
8T-4194 28, 48, 77, 78, 79, 272, 441
8T-3282 80, 81, 82, 84, 85, 86, 87, 273, 279, 280, 306, 307,
89, 90, 204, 205, 206, 207, 313, 487, 528 8T-8924 29, 30, 31, 33, 34, 158,
212, 213, 214, 215, 518, 159, 225, 527
8T-4195 282, 283, 305, 307, 308
519, 520, 521 8T-8927 200
8T-4196 276, 277
8T-4121 261, 263, 266, 267, 269, 8T-9398 545
275, 276, 277, 300, 302, 8T-4223 23, 24, 25, 27, 28, 29, 30,
304, 305, 309 31, 34, 54, 55, 56, 57, 58, 8T-9399 547
59, 60, 62, 92, 93, 94, 95,
8T-4122 29, 30, 31, 34, 59, 108, 96, 97, 98, 99, 100, 101, 8V-4772 27, 28, 29, 30, 31, 34, 225
109, 110, 111, 137, 157, 102, 103, 104, 105, 106,
158, 179, 187, 200, 225, 8Y-0356 30, 31
107, 108, 109, 110, 111,
263, 264, 265, 266, 267, 158, 185, 206, 207, 214, 8Y-0622 252, 425
268, 269, 270, 271, 272, 215, 223, 224, 225, 236,
299, 300, 301, 303, 304, 8Y-1009 265, 271, 274, 275, 276,
237, 238, 262, 265, 271,
429, 440, 476, 484, 485, 277, 278, 429
274, 275, 276, 277, 278,
486, 523, 524, 525, 526, 281, 282, 283, 284, 303, 8Y-1198 55, 206, 236, 237
527 304, 305, 306, 307, 308,
309, 313, 429, 430, 431, 8Y-1199 55, 206, 236, 237
8T-4123 276, 277, 515, 524, 525,
526, 527, 543, 544, 546 441, 476, 483, 484, 485, 8Y-1208 59
486, 487, 524, 525, 526
8T-4131 543, 544, 546 8Y-1211 59
8T-4244 265, 275, 276, 277, 304,
8T-4132 485, 486, 524, 525, 526, 305 8Y-1254 60
527
8T-4649 543, 544 8Y-1255 60
8T-4133 282, 283, 307, 308
8T-4778 26, 27, 28, 55, 56, 57, 106, 8Y-1697 256, 426
8T-4136 263, 266, 267, 269, 275, 107, 314
276, 300, 304, 309 8Y-1698 256, 426
8T-4779 265, 485, 486, 523, 525,
8T-4137 309 526 8Y-1728 543
8T-4139 16, 27, 28, 49, 54, 56, 57, 8T-4835 110, 185, 486 8Y-1729 543
77, 78, 79, 93, 94, 95, 99, 8Y-1730 543
100, 102, 103, 106, 107, 8T-4896 84, 274, 275, 277, 278,
263, 264, 265, 266, 267, 293, 294, 305, 306, 429, 8Y-1731 543
269, 272, 273, 282, 283, 436, 441, 454, 475, 476,
299, 300, 303, 304, 307, 477, 478, 514, 515, 516, 8Y-1732 543
308, 476, 483, 484, 485, 537 8Y-1772 546
487, 515 8T-4910 15, 48 8Y-1773 546
8T-4140 26, 27, 28, 31, 32, 33, 55, 8T-4934 151, 169
56, 57, 60, 61, 312, 313, 8Y-1774 546
314, 484, 485 8T-4956 23, 26, 28, 49, 99, 100, 8Y-1775 546
102, 103, 106, 107, 275,
8T-4141 99, 100, 102, 103, 106, 276, 277, 282, 283, 304, 8Y-1778 528
107, 111, 112, 526, 544 305, 307, 308, 485, 528,
543, 544 8Y-1779 526, 527
8T-4167 99, 100, 101, 102, 103,
104, 105, 112, 543, 544, 8T-4994 158, 159, 179, 527, 545, 8Y-1817 253, 254, 256
546 547 8Y-1841 484
8T-4173 263, 299, 300 8T-5092 313 8Y-1842 484
8T-4174 313 8T-5360 126, 128, 153, 159, 176 8Y-1853 483
8T-4175 525 8T-5361 170, 185, 200 8Y-1900 528
8T-4176 262, 272, 273, 303, 304, 8T-5439 525
528 8Y-1944 526, 527
8T-5460 543, 544, 546 8Y-1990 484, 485
8T-4183 15, 16, 28, 48, 78, 272,
273, 276, 277, 299, 313, 8T-5878 546 8Y-1993 484, 485
486
8T-5881 197 8Y-1994 484, 485
8T-4184 92, 93, 95, 96, 275, 276,
282, 283, 303, 304, 305, 8T-6381 515, 525, 526 8Y-2203 515, 516
307, 308 8T-6382 314 8Y-2204 515, 516
8T-4186 266, 267, 269 8T-6430 546 8Y-2210 486
8T-4187 515 8T-6871 157, 158, 179, 187, 200 8Y-2211 486
8Y-2212 486
8Y-2276 486

656
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
8Y-2279 486 9F-2247 252, 253, 254, 255, 258, 9G-9349 80, 81, 82, 83, 204, 212,
259, 260, 261, 292, 293, 231
8Y-2281 485, 486 295, 426, 428
9G-9351 22, 53, 222, 235, 298, 439,
8Y-2429 487 9G-0007 381 457, 482
8Y-3413 274, 275, 276, 277, 278, 9G-1368 190, 197 9H-1031 135, 386, 414, 540, 542,
304, 305, 306, 429, 441 563, 572, 588
9G-1642 582
8Y-3437 278 9H-6981 411
9G-2417 118
8Y-3438 278 9H-6982 411
9G-2418 118
8Y-3439 277 9H-7078 412
9G-2419 118
8Y-3440 277 9H-7687 385, 402, 561, 571
9G-2420 118
8Y-5859 537 9H-7759 401, 402, 570, 571
9G-2421 118
8Y-5861 537 9H-8489 383, 559
9G-2422 118
8Y-6559 425 9H-9414 401, 402, 570, 571
9G-2424 120
8Y-6625 526, 527, 546 9K-0028 317, 444
9G-2428 120
8Y-6627 543 9K-0029 317, 444
9G-2430 120
8Y-6628 543 9K-3028 338, 462, 498
9G-2432 120
8Y-6629 525 9K-4059 317, 444
9G-2434 120
8Y-6630 525 9K-4060 316, 317, 443, 444
9G-2436 120
8Y-6640 308, 309 9K-4061 316, 317, 443, 444
9G-2438 120
8Y-6643 262 9K-4062 317, 444
9G-3106 43, 228
8Y-6644 262 9K-6628 290, 315, 316, 317, 442,
9G-3110 6, 7, 8, 9, 10, 11, 41, 42, 443, 444, 453
8Y-6650 294, 436 43, 216, 217, 218, 227,
8Y-6651 294, 436 228, 229, 285, 287, 289, 9K-6629 290, 315, 316, 317, 442,
432, 433, 434, 468 443, 444, 453
8Y-6671 523
9G-4872 150, 151, 152, 153, 157, 9K-8857 322, 447
8Y-6672 523 163, 169, 175, 176, 178,
184, 185, 186, 199 9K-9113 322, 447
8Y-7120 306, 441
9G-5664 76, 80, 81, 82, 83, 84, 85, 9M-0632 385, 561
8Y-7121 306, 441 87, 121, 122, 123, 124, 9M-3818 359
8Y-7125 304, 305, 306, 441 125, 126, 127, 128, 129,
130, 131, 132, 133, 155, 9M-5045 373
8Y-8799 308, 309 156, 164, 170, 191, 204, 9M-6743 415, 573
8Y-8800 308, 309 212, 231
9M-6744 415, 573
8Y-8822 308, 309 9G-6389 338, 462, 498
9M-7783 330, 451
8Y-8823 308, 309 9G-6396 320, 446, 453
9M-9729 135, 383, 386, 387, 388,
8Y-8908 302, 440 9G-7046 572 537, 539, 540, 542, 557,
9G-8027 366, 367, 522 558, 559, 563, 564, 565
8Y-8909 302, 440
9G-8032 366, 367, 522 9M-9730 51, 88, 121, 122, 123, 124,
8Y-8911 302, 440 125, 126, 127, 128, 134,
8Y-8912 302, 440 9G-8300 339, 463 135, 155, 164, 169, 176,
9G-8301 339, 463 178, 184, 191, 213, 341,
8Y-8920 308 360, 363, 364, 366, 367,
8Y-8921 308 9G-8581 10, 217 383, 384, 385, 386, 387,
388, 401, 402, 464, 479,
8Y-8948 309 9G-8582 10, 217 480, 499, 501, 503, 514,
9G-8583 10, 217 515, 516, 517, 518, 522,
8Y-8949 309 537, 538, 539, 540, 542,
8Y-8964 281, 430 9G-8584 10, 217 557, 558, 559, 560, 561,
562, 563, 564, 565, 570,
8Y-8967 281, 282, 430, 431 9G-8585 8, 9, 10, 217, 285, 287, 571, 572
432, 433
8Y-8968 281, 282, 430, 431 9M-9758 383, 557
9G-8586 8, 9, 10, 217, 285, 287,
8Y-8977 281, 282, 430, 431 432, 433 9N-2693 411, 413, 414
8Y-8978 281, 282, 430, 431 9G-8588 9, 10, 433 9N-4173 252, 253, 254, 426
8Z-1461 320 9G-8591 10, 217 9N-4174 249, 424
8Z-1462 320 9G-8592 6, 7, 8, 9, 10, 11, 216, 217, 9N-4175 249, 424
218, 285, 287, 289, 432,
9B-7237 84, 293, 294, 436, 454, 433, 434 9N-4327 249, 424
475, 476, 477, 478, 514,
515, 516, 537 9G-9344 133 9N-4328 249, 424

657
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
9N-4501 249 9S-3582 51, 88, 134, 341, 363, 364, 9W-1850 168
384, 464, 479, 480, 501,
9N-4502 249 517, 518, 538, 560, 562 9W-1851 168
9N-4680 13, 14, 17, 18, 47, 50, 220, 9S-4324 399, 569 9W-1852 168
232
9S-4325 399, 569 9W-1853 168
9N-4683 13, 14, 17, 18, 47, 50, 220,
232 9S-4326 399, 569 9W-1854 168

9N-4733 206, 223, 224, 236, 237 9S-4536 572 9W-1855 168

9N-4736 224 9S-4540 572 9W-1867 183

9N-4737 224 9S-5293 566 9W-1869 183

9N-4740 224 9S-5294 566 9W-1870 183

9N-4741 224 9S-6678 397 9W-1996 189

9N-4742 224 9S-7221 399, 400, 569 9W-1997 189

9N-4743 224 9S-8245 343, 369, 370 9W-1999 189

9P-0201 150, 152, 163, 175 9S-8246 343, 369, 370 9W-2000 189

9P-1360 46, 47, 50, 53, 232, 235, 9S-8257 343, 370 9W-2142 154, 256, 399, 400, 403,
482 412, 569
9S-8258 343, 370
9P-1362 53, 235, 482 9W-2146 312
9S-8304 402, 571
9P-1367 53, 235, 482 9W-2201 411, 413, 414
9S-8320 88, 363, 517, 518
9P-1449 572 9W-2423 91, 521
9S-8321 385, 561
9P-2245 76, 80, 81, 82, 83, 84, 85, 9W-2738 174
87, 91, 204, 212, 231, 521 9S-8322 412
9W-2743 173
9P-2661 148, 162 9S-8353 343
9W-2744 173
9P-2665 148, 162 9S-8354 343
9W-2755 166, 167, 172, 173
9P-3308 403 9S-8358 343
9W-3361 35, 467
9P-3309 403 9S-8359 343
9W-3550 140
9P-7782 327, 450, 458 9S-9534 342, 368, 465, 504
9W-3560 143
9P-7786 327, 450, 458 9S-9535 342, 368, 465, 504
9W-3563 394, 567
9S-0312 386, 542, 563 9S-9651 555
9W-3955 12
9S-0542 409 9U-8451 96, 97, 98
9W-4025 141
9S-1029 573 9U-8456 97, 98
9W-4194 169, 184, 185, 191, 199
9S-1030 573 9U-8457 96, 97, 98
9W-4195 190
9S-1043 389 9U-8459 96, 98
9W-4264 180, 188
9S-1044 389 9U-8464 96, 98
9W-4265 167, 172
9S-1045 389, 566 9U-8468 112, 113
9W-4334 249, 425
9S-1046 389, 566 9U-8786 97
9W-4335 249, 425
9S-1322 121, 122, 125, 126, 129, 9U-8791 97, 98
9W-4381 63, 64, 507, 508
130, 131 9U-9062 70
9W-4465 189
9S-1669 390, 391 9U-9065 293, 294, 436
9W-4480 150, 152, 153, 163, 175,
9S-1670 390, 391 9U-9198 25 176
9S-1671 390, 391 9U-9201 106, 108, 110 9W-4481 150, 152, 153, 163, 175,
9S-1838 66, 68, 69, 70, 71, 208, 176
9U-9204 106, 108, 110
209, 210, 346, 347, 348, 9W-4488 169, 184, 185
349, 352, 353, 488, 489, 9U-9206 97
490, 491, 494, 509, 510, 9W-4489 169, 184, 185
9U-9209 97
511, 512, 582, 583 9W-5187 45, 230
9U-9577 174
9S-2727 397, 398, 568 9W-5224 19, 20, 21, 52, 205, 221,
9W-0922 143 233, 234, 257, 296, 297,
9S-2728 411
9W-0929 141 322, 323, 324, 325, 326,
9S-3567 341, 363, 364, 464, 480, 327, 339, 340, 341, 342,
501, 518, 562 9W-1057 515, 516, 537 361, 362, 363, 368, 427,
9S-3581 51, 88, 134, 341, 363, 364, 436, 437, 447, 448, 449,
9W-1058 537
384, 464, 479, 480, 501, 450, 454, 455, 456, 458,
517, 518, 538, 560, 562 9W-1059 515, 516, 537 463, 464, 465, 476, 477,
478, 481, 500, 504
9W-1060 537

658
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER
9W-5265 182 9W-9058 114, 116, 117, 374, 376,
529, 530, 531, 533, 548
9W-5266 182
9W-9059 530
9W-5408 366, 367, 503
9W-9060 530
9W-5411 366, 367, 503
9W-9061 530
9W-5449 206, 207, 214, 215
9W-9062 530
9W-5541 148, 162
9W-9265 250, 251, 425, 578
9W-5581 136, 541
9W-9266 251, 425
9W-5582 136, 541
9W-9498 136, 541
9W-5588 144, 160
9W-9499 170, 175, 176, 186
9W-5723 189
9W-9621 193, 195
9W-5724 189
9W-9674 167, 172
9W-5825 189
9W-9675 146, 147
9W-5826 189
9W-9844 155, 156, 164, 178
9W-5828 189
9X-2327 46
9W-5933 188
9X-8257 26, 27, 28, 55, 56, 57, 106,
9W-5934 188 107, 265, 313, 314
9W-6037 169 9X-8268 312, 480
9W-6038 169 9X-8271 46
9W-6039 169 9X-8898 157
9W-6174 19, 296, 326, 437, 449, 455 9Z-9251 120
9W-6632 136, 541 9Z-9253 120
9W-6854 182 9Z-9255 120
9W-7259 568 9Z-9257 120
9W-7267 198 9Z-9261 119, 148, 536
9W-7269 198, 199 9Z-9263 119, 148, 536
9W-7882 151 9Z-9265 119, 148
9W-7884 151 9Z-9267 119, 148
9W-7939 218 Use Cat 576, 577, 578, 579, 581,
9W-7984 12, 219 582, 584, 585, 586, 587,
588
9W-8047 156, 164
9W-8182 229
9W-8183 229
9W-8191 45, 230
9W-8320 408
9W-8326 12, 219
9W-8328 168
9W-8350 342, 465
9W-8353 342, 465
9W-8356 386, 387, 388, 563, 564,
565
9W-8359 386, 387, 388, 563, 564,
565
9W-8381 408
9W-8709 155, 156, 164
9W-8710 155, 156, 164
9W-8878 153
9W-8936 394, 567
9W-8937 394
9W-8938 394

659
Cat ® Dealers define world-
class product support.
We offer you the right parts and service

solutions, when and where you need them.

The Cat Dealer network of highly trained

experts keeps your entire fleet up and running

to maximize your equipment investment.

PECP3003-05 VOL I
www.cat.com

© 2007 Caterpillar • All Rights Reserved • Printed in USA

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Parts Sales Kit
Undercarriage
6th Edition - Vol II
 Undercarriage Parts Sales Kit
TABLE OF CONTENTS

Undercarriage
MODELS PAGE NO.

Introduction..................................................................................................................2
Excavators/Front Shovels........................................................................................... 3
Timberking...............................................................................................................255
Mini Hydraulic Excavators....................................................................................... 271
Multi-Terrain Loaders.............................................................................................. 287
Paving Products...................................................................................................... 301
Product Information................................................................................................. 327
Conversion Guide....................................................................................................351
Part Number Index.................................................................................................. 364

1
 Introduction
Introduction

This Caterpillar Undercarriage book is designed to provide dealer salesmen (field and instore) with part
numbers and product information as well as features and benefits for selected parts and service commodities.
It is a quick reference tool which lists part numbers and applications for items that are: new, competitive
and high in sales volume and sales potential.

The Undercarriage book should not be used as a substitute for Parts Books, Numerical Parts Record,
Parts Pricing Medium or any other formal reference publication. All part numbers, specifications and
application data published in the Undercarriage book are subject to change without notice. Any information
taken from this publication for use in preparing a Parts Sales Order or Price Quotation should
always be verified against the Numerical Parts Record in accordance with the Management
Partsgram entitled “The Numerical Parts Record.”

2
 Excavators/Front Shovels
INDEX

Excavators/Front Shovels
MODELS PAGE NO.

308C, 307C, 307B, 307............................................................................................... 5

314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311........................................... 17
315C, 315B, 315....................................................................................................... 26
317BL, 317................................................................................................................ 32
318C, 318B............................................................................................................... 37
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320........................................ 44
323DS, 320CS, 320BS, 320S................................................................................... 57
324D, 322C, 322B, 322............................................................................................. 63
325D, 325C, 325B, 325............................................................................................. 77
330D, 330C, 330B, 330............................................................................................. 92
345C, 345B............................................................................................................. 105
350.......................................................................................................................... 113
365CL, 365BL......................................................................................................... 116
375, 5080................................................................................................................ 120
385C, 385B, 5090................................................................................................... 124
5110B...................................................................................................................... 129
5130B, 5130............................................................................................................ 133
5230........................................................................................................................ 136
205.......................................................................................................................... 139
211.......................................................................................................................... 145
213.......................................................................................................................... 151
215.......................................................................................................................... 157
215SA, 219, 225......................................................................................................169
225SA, FB227, 229, 231......................................................................................... 183
235.......................................................................................................................... 192
245.......................................................................................................................... 208
E70B, E70............................................................................................................... 218
E120B, E120, E110B, E110.................................................................................... 222
E140........................................................................................................................ 228
E180, EL180............................................................................................................231
E200B, EL200B....................................................................................................... 234
E240C, EL240C, E240B, EL240B, E240, EL240.................................................... 236

3
Excavators/Front Shovels
INDEX

Excavators/Front Shovels
MODELS PAGE NO.

E300B, EL300B, E300, EL300................................................................................ 242

E450........................................................................................................................ 248
E650........................................................................................................................ 251

4
 Excavators/Front Shovels
308C, 307C, 307B, 307

308C GREASE TRACK

CRW
6.10" (154.0 mm) PITCH - 14 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 40 Section 2 194-1172
Components of Link Assembly
Track Links
RH Master Link 1 136-2405
LH Master Link 1 136-2407
RH Links 39 136-2404
LH Links 39 136-2410
Other Components
Pin 39 168-6758
Master Pin 1 136-2408
Bushing 39 168-6757
Master Bushing 1 168-6756
Cotter 1 096-7033
Seal (Poly - W) 78 168-6759
Seal Master (Poly - W) 2 168-6760
1
Track Hardware
Bolt 160 136-2401
Nut 160 136-2402
1 Not part of link assembly; required to assemble track group

5
 Excavators/Front Shovels
308C, 307C, 307B, 307

308C TRACK
CRW
6.10" (154.0 mm) PITCH - 14 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 40 Section 2 176-4879
Components of Link Assembly
Track Links
RH Master Link 1 136-2405
LH Master Link 1 136-2407
RH Links 39 136-2404
LH Links 39 136-2410
Other Components
Pin 39 168-6758
Master Pin 1 136-2408
Bushing 39 168-6755
Master Bushing 1 168-6756
Cotter 1 096-7033
Spacer 2 136-2409
1
Track Hardware
Bolt 160 136-2401
Nut 160 136-2402
1 Not part of link assembly; required to assemble track group

6
 Excavators/Front Shovels
308C, 307C, 307B, 307

307C/B GREASE TRACK

BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ
6.10" (154.0 mm) PITCH -- 14 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 38 Section 2 168-6753
Components of Link Assembly
Track Links
RH Master Link 1 136-2405
LH Master Link 1 136-2407
RH Links 37 136-2404
LH Links 37 136-2410
Other Components
Pin 37 168-6758
Master Pin 1 136-2408
Bushing 37 168-6757
Master Bushing 1 168-6756
Cotter 1 096-7033
Seal (Poly - W) 74 168-6759
Seal Master (Poly - W) 2 168-6760
1
Track Hardware
Bolt 152 136-2401
Nut 152 136-2402
1 Not part of link assembly; required to assemble track group

7
 Excavators/Front Shovels
308C, 307C, 307B, 307

307C/B TRACK
BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ
6.10" (154.0 mm) PITCH -- 14 mm BOLT

SEALED PART UNSEALED

QUANTITY NUMBER PART NUMBER
Link Assembly -- 38 Section 2 145-2949 136-2403
Components of Link Assembly
Track Links
RH Master Link 1 136-2405 136-2405
LH Master Link 1 136-2407 136-2407
RH Links 37 136-2404 136-2404
LH Links 37 136-2410 136-2410
Other Components
Pin 37 168-6758 168-6758
Master Pin 1 136-2408 136-2408
Bushing 37 145-2951 168-6755 1
Master Bushing 1 168-6756 1 168-6756 1
Cotter 1 096-7033 096-7033
Spacer 2 145-2952 136-2409
Washer 152 145-2953 --
2
Track Hardware
Bolt 152 136-2401 136-2401
Nut 152 136-2402 136-2402
1 Large O.D. bushing
2 Not part of link assembly; required to assemble track group

8
 Excavators/Front Shovels
308C, 307C, 307B, 307

307B GREASED TRACK

AFB
5.31" (135.0 mm) PITCH -- 1/2" BOLT

QUANTITY PART NUMBER

Link Assembly -- 42 Section 2 172-3290
Components of Link Assembly
Track Links
RH Master Link 1 3A-9617
LH Master Link 1 3A-9616
RH Links 41 3A-9615
LH Links 41 3A-9614
Other Components
Pin 41 117-8882
Master Pin 1 117-8883
Bushing 41 172-3288
Master Bushing 1 117-8881
Cotter 1 096-7033
Seal (Poly - W) 82 171-6767
Seal - Master (Poly - W) 2 171-6766
1
Track Hardware
Bolt 168 3A-9605
Nut 168 117-8885
1 Not part of link assembly; required to assemble track group

9
 Excavators/Front Shovels
308C, 307C, 307B, 307

307 TRACK
2FL, 2PM, 9ZL
5.31" (135.0 mm) PITCH -- 1/2" BOLT

STD LGP
PART NUMBER 42 Section 44 Section
Link Assembly (Quantity 2) 102-8077 123-1813
Components of Link Assembly
Track Links
RH Master 096-2142 1 1
LH Master 096-2143 1 1
RH Regular 093-1969 41 43
LH Regular 093-1970 41 43
Other Components
Pin 093-0515 41 43
Master Pin 093-0517 1 1
Bushing 102-8107 41 43
Master Bushing 102-8108 1 1
Spacer 093-0036 2 2
Cotter Pin 096-7033 1 1
1
Track Hardware
Bolt 102-8072 168 176
Nut 102-8073 168 176
1 Not part of link assembly: required to assemble track group.

10
 Excavators/Front Shovels
308C, 307C, 307B, 307

307 TRACK
2WM
5.31" (135.0 mm) PITCH -- 1/2" BOLT

SEALED PART UNSEALED

QUANTITY NUMBER PART NUMBER
Link Assembly -- 42 Section 2 171-7623 115-5756
Components of Link Assembly
Track Links
RH Master Link 1 3A-9617 3A-9617
LH Master Link 1 3A-9616 3A-9616
RH Links 41 3A-9615 3A-9615
LH Links 41 3A-9614 3A-9614
Other Components
Pin 41 117-8882 117-8882
Master Pin 1 117-8883 117-8883
Bushing 41 171-7624 117-8880
Master Bushing 1 117-8881 117-8881
Cotter 1 096-7033 096-7033
Spacer 2 117-8884 117-8884
Washer 164 145-2953 --
1
Track Hardware
Bolt 168 3A-9605 3A-9605
Nut 168 117-8885 117-8885
1 Not part of link assembly; required to assemble track group

308C, 307C/B TRACK SHOES

CRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ
6.10" (154.0 mm) PITCH -- 14 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (4 extra bolt holes on outer edge of shoe) 1 17.7" (450 mm) 136-2400
Triple Grouser 17.7" (450 mm) 145-2948
Triple Grouser 23.6" (600 mm) 145-2950
1 Rubber Pad Assembly 170-4419, Nut 159-6528, Washer 159-6529.

308C TRACK RUBBER BELTS

6.10" (154.0 mm) -- 14 mm BOLT

(PER SIDE) WIDTH PART NUMBER

Shoe Assembly Segment Rubber Belt (40 Section) 17.7" (450 mm) 194-1150 1
1 2 required per side, use 093-0255 bolts and 136-2402 nuts to assemble to link assembly. To replace one rubber shoe order 169-8092.

11
 Excavators/Front Shovels
308C, 307C, 307B, 307

307C/B TRACK RUBBER BELTS

6.10" (154.0 mm) PITCH -- 14 mm BOLT

(PER SIDE) WIDTH PART NUMBER

Shoe Assembly Segment Rubber Belt (38 Section) 17.7" (450 mm) 169-8088 1
1 2 required per side, use 093-0255 bolts and 136-2402 nuts to assemble to link assembly.To replace one rubber shoe order 169-8092.

307B, 307 TRACK SHOES

2WM, AFB
5.31" (135.0 mm) PITCH -- 1/2" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 17.7" (450 mm) 113-4189
Triple Grouser 21.7" (550 mm) 117-4855
Triple Grouser 23.6" (600 mm) 115-5198

307 TRACK SHOES

2FL, 2PM, 9ZL
5.31" (135.0 mm) PITCH -- 1/2" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (4 extra bolt holes on outer edge of shoe) 1 17.7" (450 mm) 102-8150
Triple Grouser 17.7" (450 mm) 1R-9507
Triple Grouser 23.6" (600 mm) 093-1935
1 Rubber Pad Assembly 124-7856, Nut 129-6932, Washer 124-7857

307 TRACK
OPTIONAL RUBBER BELT
5.31" (135.0 mm) PITCH

TYPE WIDTH PART NUMBER

1
Rubber Belt 17.7" (450 mm) 134-7697
1 2 Per machine

308C, 307C/B SPROCKETS

CRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ
6.10" (154.0 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket (21 Teeth) 1 130-9326
Bolt 12 8C-3425

12
 Excavators/Front Shovels
308C, 307C, 307B, 307

307B, 307 SPROCKETS

2FL, 2PM, 2WM, 9ZL, AFB
5.31"(135.0 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (23 Teeth) 1 5I-9336
Bolt 12 8C-3425

308C IDLERS
CRW
6.10" (154.0 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 185-9162
Components of Group
Idler Assembly 1 145-3018
1
Bearing 2 5I-6274
Shaft 1 185-9185
Bearing Block 2 185-9159
Pin 2 185-9160
Seal -- Duo-Cone Group 2 093-1414
Toric Ring 1 2 093-1364
Seal -- Shaft O-Ring 2 095-1600
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown per assembly or group.

307C/B IDLERS
BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ
6.10" (154.0 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 -1
Components of Group
Idler Assembly 1 145-3018
2
Bearing 2 5I-6274
Shaft 1 102-8082
Bearing Block 2 102-8084
Pin 2 3E-4370
Seal -- Duo-Cone Group 2 093-1414
Toric Ring 2 2 093-1364
Seal -- Shaft O-Ring 2 095-1600
Plug 1 7H-3171
1 Replaced by Idler Group 185-9162.
2 Component of preceding assembly or group; quantity shown per assembly or group.

13
 Excavators/Front Shovels
308C, 307C, 307B, 307

307B IDLERS
AFB
5.31" (135.0 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 115-6336
Components of Group
Idler Assembly 1 115-6335
1
Bearing 2 5I-6274
Shaft 1 102-8082
Bearing Block 2 102-8084
Pin 2 3E-4370
Seal -- Duo-Cone Group 2 093-1414
Toric Ring 1 2 093-1364
Seal -- Shaft O-Ring 2 095-1600
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown per assembly or group.

307 IDLERS
5.31" (135.0 mm) PITCH

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Idler Group 2 6I-6488 115-6336
Components of Group
Idler Assembly 1 6I-6489 115-6335
1
Bearing 2 5I-6274 5I-6274
Shaft 1 102-8082 102-8082
Bearing Block 2 102-8084 102-8084
Pin 2 3E-4370 3E-4370
Seal -- Duo-Cone Group 2 093-1414 093-1414
Toric Ring 1 2 093-1364 093-1364
Seal -- Shaft O-Ring 2 095-1600 095-1600
Plug 1 7H-3171 7H-3171
1 Component of preceding assembly or group; quantity shown per assembly or group.

14
 Excavators/Front Shovels
308C, 307C, 307B, 307

308C, 307C/B, 307 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 136-2393
Components of Group
Roller Shell Assembly 1 136-2394
1
Bearing 2 099-6461
Shaft 1 6I-6575
Retainer 1 099-6462
Cover 1 102-8079
Bolt 5 6V-8202
Seal -- Duo-Cone Group 2 099-6463
Seal -- Shaft O-Ring 1 095-1541
Plug 1 7H-3171
2
Mounting Hardware
Setscrew 1 095-1277
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

308C, 307C/B TRACK ROLLERS

CRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 10 127-3806
Components of Group
Roller Shell (SF) 1 6I-6525
1
Bearing 2 5I-6274
Shaft 1 102-8115
End Collar 1 127-3804
End Collar 1 127-3805
Dowel 2 102-8116
Pin 1 159-0049
Seal -- Group 2 136-0296
Toric Ring 1 2 136-0297
Plug - Pipe 1 3D-4603
2
Mounting Hardware
Bolt 4 6V-8336
Washer 4 5P-8245
1 Component of proceeding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

15
 Excavators/Front Shovels
308C, 307C, 307B, 307

307B, 307 TRACK ROLLERS 1

2FL, 2PM, 2WM, 9ZL, AFB

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 8 127-3806
Center Flange (CF) 4 127-3807
Components of Group
Roller Shell (SF) 1 6I-6525
Roller Shell (CF) 1 6I-6528
Bearing 2 2 5I-6274
Shaft 1 102-8115
End Collar 1 127-3805
End Collar 1 127-3804
Pin 2 102-8116
Seal -- Duo-Cone Group 2 136-0296
2
Toric Ring 2 136-0297
Seal -- Shaft O-Ring 2 095-1659
Plug 1 3D-4603
3
Mounting Hardware
Bolt 4 8T-4648
Washer 4 8T-4223
1 Machine roller sequence (measured from front of machine): SF, SF, CF, SF, CF, SF
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

16
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

311C, 311B, 311 TRACK

CLK, CKE, 2LS, 2MS, 5PK, 8GR, 8HR, 9LJ
6.75" (171.5 mm) PITCH -- 16 mm BOLT

FORMER GREASED
SEALED PART PART
QUANTITY PART NUMBER NUMBER NUMBER
Link Assembly -- 41 Section 2 4I-7479 -- 1 176-4874
Components of Link Assembly
Track Links
RH Master 1 4I-7477 4I-7477 4I-7477
LH Master 1 4I-7478 4I-7478 4I-7478
RH Regular 40 4I-7475 4I-7475 4I-7475
LH Regular 40 4I-7476 4I-7476 4I-7476
Other Components
Pin 40 5I-6140 162-4305 162-4305
Master Pin 1 099-0653 099-0653 099-0653
Bushing 40 6I-6446 162-4304 162-4304
Master Bushing 1 093-1887 162-4306 162-4306
Seal (Poly - W) 80 -- 162-4307 162-4307
Seal - Master (Poly - W) 2 -- -- 176-4872
Seal (Resin) 80 4I-7473 -- --
Spacer 2 093-0037 093-0037 --
Cotter Pin 1 095-0863 095-0863 095-0863
Track Hardware 2
Bolt 164 4I-7538 4I-7538 4I-7538
Nut 164 5I-6125 5I-6125 5I-6125
1 Upgrade to 176-4874.
2 Not part of link assembly; required to assemble track group.

17
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

312C, 312B GREASED TRACK

43 SECTION: 6SW0457 & UP, 9NW210 & UP, BNN
46 SECTION: 2KW0223 & UP, 9FS6082-UP,CBT
6.75" (171.5 mm) PITCH -- 16 mm BOLT

PART NUMBER 43 SECTION 46 SECTION

Link Assembly (Quantity 2) 180-2689 184-5859
Components of Link Assembly
Track Links
RH Master 180-2687 1 1
LH Master 180-2686 1 1
RH Regular 9K-6629 42 45
LH Regular 9K-6628 42 45
Other Components
Pin 9K-4060 42 45
Master Pin 180-2684 1 1
Bushing 180-2681 42 45
Master Bushing 180-2683 1 1
Seal 179-9339 84 90
Master Seal 179-9340 2 2
Cotter Pin 095-0863 1 1
1
Track Hardware
Bolt 4I-7538 172 184
Nut 5I-6125 172 184
1 Not part of link assembly; required to assemble track group.

18
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

312B TRACK
43 SECTION: 6SW1-456, 9NW1-209
46 SECTION: 2KW1-0222, 9FS1-0681
6.75" (171.5 mm) PITCH -- 16 mm BOLT

SEALED 43 46
PART NUMBER SECTION SECTION
Link Assembly (Quantity 2) 146-9175 150-4419
Components of Link Assembly
Track Links
RH Master 4I-7477 1 1
LH Master 4I-7478 1 1
RH Regular 4I-7475 42 45
LH Regular 4I-7476 42 45
Other Components
Pin 5I-6140 42 45
Master Pin 099-0653 1 1
Bushing 146-9174 42 45
Master Bushing 093-1887 1 1
Seal (Spring Washer) 5K-2707 172 184
Spacer 147-0423 2 2
Cotter Pin 095-0863 1 1
1
Track Hardware
Bolt 4I-7538 172 184
Nut 5I-6125 172 184
1 Not part of link assembly; required to assemble track group.

19
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

314C, 313C, 312C/B, 312 TRACK

CAE, FDS, HGF, WSA, 2NS, 3ES, 6BL, 6GK, 6SW, 7DK, 8JR, 9GR, 9HR, 9NW, KJA, KHB
6.75" (171.5 mm) PITCH -- 16 mm BOLT

LATEST
GREASE GREASE
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 43 Section 2 -- 1 176-4870
Components of Link Assembly
Track Links
RH Master 1 4I-7477 4I-7477
LH Master 1 4I-7478 4I-7478
RH Regular 42 4I-7475 4I-7475
LH Regular 42 4I-7476 4I-7476
Other Components
Pin 42 162-4305 162-4305
Master Pin 1 099-0653 099-0653
Bushing 42 162-4304 162-4304
Master Bushing 1 162-4306 162-4306
Seal (Poly - W) 84 162-4307 162-4307
Seal - Master (Poly - W) 2 -- 176-4872
Spacer 2 093-0037 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 2
Bolt 172 4I-7538 4I-7538
Nut 172 5I-6125 5I-6125
1 Upgrade to 176-4870.
2 Not part of link assembly; required to assemble track group.

20
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

314CL, 312CL, 312BL TRACK

CBA, 3FS, PCA
6.75" (171.5 mm) PITCH -- 16 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 46 Section 2 -- 1 176-4871
Components of Link Assembly
Track Links
RH Master 1 4I-7477 4I-7477
LH Master 1 4I-7478 4I-7478
RH Regular 45 4I-7475 4I-7475
LH Regular 45 4I-7476 4I-7476
Other Components
Pin 45 5I-6140 162-4305
Master Pin 1 099-0653 099-0653
Bushing 45 6I-6446 162-4304
Master Bushing 1 093-1887 162-4306
Seal (Poly - W) 90 -- 162-4307
Seal - Master (Poly - W) 2 -- 176-4872
Seal (Resin) 90 4I-7473 --
Spacer 2 093-0037 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 2
Bolt 184 4I-7538 4I-7538
Nut 184 5I-6125 5I-6125
1 Upgrade to 176-4871.
2 Not part of link assembly; required to assemble track group.

21
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

312B, 313B, 312 TRACK

2NS, 3ES, 6BL, 6GK, 7DK, 8JR, 9GR, 9HR, 9PR, AEX, BAS
6.75" (171.5 mm) PITCH -- 16 mm BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 43 Section 2 -- 1
Components of Link Assembly
Track Links
RH Master 1 4I-7477
LH Master 1 4I-7478
RH Regular 42 4I-7475
LH Regular 42 4I-7476
Other Components
Pin 42 5I-6140
Master Pin 1 099-0653
Bushing 42 6I-6446
Master Bushing 1 093-1887
Seal (Resin) 84 4I-7473
Spacer 2 093-0037
Cotter Pin 1 095-0863
2
Track Hardware
Bolt 172 4I-7538
Nut 172 5I-6125
1 Upgrade to 176-4870 link assembly
2 Not part of link assembly; required to assemble track group.

314C, 313C/B, 312C/B, 311C/B, 312, 311 TRACK SHOES

6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH GROUSER HEIGHT PART NUMBER

Triple Grouser (4 extra bolt holes on outer edge of shoe) 1 19.7" (500 mm) 20 mm 137-6114
2
Triple Grouser 19.7" (500 mm) 20 mm 1R-6008
2
Triple Grouser 23.6" (600 mm) 20 mm 1R-6009
Triple Grouser 2 27.6" (700 mm) 20 mm 1R-6010
2
Triple Grouser 30.3" (770 mm) 20 mm 1R-6011
Triple Grouser 2 19.7" (500 mm) 25 mm 3A-8962
2
Triple Grouser 23.6" (600 mm) 25 mm 3A-8967
2
Triple Grouser 27.6" (700 mm) 25 mm 3A-8968
Triple Grouser 2 30.3" (770 mm) 25 mm 3A-8969
Self-Cleaning 30.3" (770 mm) -- 096-0231
Flat 19.7" (500 mm) -- 096-0240
Rubber 19.7" (500 mm) -- 1R-9814
1 Center Punched slots; Rubber Pad Assembly 170-4418, Nut 137-6109, Washer 137-6108.
2 Center Punched slots

22
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

311C/B, 311 TRACK RUBBER BELTS

(PER SIDE) WIDTH PART NUMBER

Segment Rubber Belt (41 Section) 19.7" (500 mm) -1
1 Required per side, (1) 169-8089-shoe as., (1) 169-8090-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043, Nut
5I-6125

314C, 312C/B, 312 TRACK RUBBER BELTS

(PER SIDE) WIDTH PART NUMBER

Segment Rubber Belt (43 Section) 19.7" (500 mm) -1
1 Required per side, (1) 169-8089-shoe as., (1) 169-8091-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043, Nut
5I-6125

314CL, 312CL, 312BL, 312L TRACK RUBBER BELTS

(PER SIDE) WIDTH PART NUMBER

Segment Rubber Belt (46 Section) 19.7" (500 mm) -1
1 Required per side, (2) 169-8091-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043, Nut 5I-6125

313C/B, 312C/B, 312 TRACK RUBBER BELTS

ONE PIECE

PART
(PER MACHINE) WIDTH QUANTITY NUMBER
Belt (One Piece) 19.7" (500 mm) 2 136-0351

314C, 313C/B, 312C/B, 311C/B, 312, 311 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 4I-7472
Bolt 15 8T-7338

312C/B SPROCKETS
2KW223-UP, 6SW457-UP, 9FS682-UP, 9NW210-UP, CBT, BNN

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 180-2677
Bolt 15 147-8495

23
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

314C, 313C/B, 312C/B, 311C/B, 312, 311 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 4I-7337
Components of Group
Idler Assembly 1 6I-6590
1
Bearing 2 099-0157
Shaft 1 6I-6477
Bearing Block 2 4I-7488
Pin 2 099-0163
Seal -- Duo-Cone Group 2 099-0159
1
Toric Ring 2 099-0160
Seal -- Shaft O-Ring 2 095-1662
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

314C, 313C/B, 312C/B, 311C/B, 312, 311 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 4I-7345
Components of Group
Roller Shell Assembly 1 7Y-2155
1
Bearing 2 099-0185
Shaft 1 7Y-2159
Retainer 1 7Y-2162
Cover 1 7Y-2158
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 099-0183
Toric Ring 1 2 099-4739
Seal -- Shaft O-Ring 1 6V-7658
Plug 1 7H-3171
Mounting Hardware 2
Bolt 1 8T-5878
1 Component of preceding assembly or group
2 Not included in roller group; quantity shown is required to mount each roller.

24
 Excavators/Front Shovels
314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

314C, 313C/B, 312C/B, 311C/B, 312, 311 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 12 151-9747
Components of Group
Roller Shell (SF) 1 6I-6451
1
Bearing 2 099-0195
Shaft 1 151-9748
End Collar 2 4I-7489
Retaining Ring 1 6I-6454
Pin 1 6I-6549
Seal -- Duo-Cone Group 2 099-0193
1
Toric Ring 2 099-0194
Seal -- Shaft O-Ring 2 6V-7660
Plug 1 7H-3171
2
Mounting Hardware
Bolt 4 7X-2555
Washer 4 8T-4122
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

314C, 313C, 312C/B CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 133-2554
Bolt 8 8T-4779
Washer 8 9X-8257

25
 Excavators/Front Shovels
315C, 315B, 315

315C/B, 315 TRACK

CFL, CFB, 1SW, 4YM, 6XM
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 41 Section 2 -- 1 194-1133 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 40 9W-3137 9W-3137
LH Regular 40 9W-3138 9W-3138
Other Components
Pin 40 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 40 117-1371 190-3523
Master Bushing 1 117-1372 190-3524
Seal (Poly - W) 80 -- 158-4380
Seal - Master (Poly - W) 2 -- 158-4381
Seal (Spring Washer) 164 5S-0709 --
Spacer 2 5S-0754 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 3
Bolt 164 9W-3619 9W-3619
Nut 164 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1133
2 Stepped Bushing Design.
3 Not part of link assembly; required to assemble track group.

26
 Excavators/Front Shovels
315C, 315B, 315

315CL, 315BL, 315L TRACK

CFT, CJC, ANF, 3AW, 6YM
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 44 Section 2 -- 1 194-1134 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 43 9W-3137 9W-3137
LH Regular 43 9W-3138 9W-3138
Other Components
Pin 43 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 43 117-1371 190-3523
Master Bushing 1 117-1372 190-3524
Seal - (Poly - W) 86 -- 158-4380
Seal - Master (Poly - W) 2 -- 158-4381
Seal (Spring Washer) 176 5S-0709 --
Spacer 2 5S-0754 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 3
Bolt 176 9W-3619 9W-3619
Nut 176 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1134.
2 Stepped Bushing Design.
3 Not part of link assembly; required to assemble track group.

315C/B, 315 TRACK SHOES

7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5062
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5063
1
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351
Self-Cleaning Shoe 1 31.5" (800 mm) 8E-8835
1 Typically used on long configurations "L" only.

27
 Excavators/Front Shovels
315C, 315B, 315

315C SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 8E-9805
Bolt 16 7X-2562

315B, 315 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 102-8134
Bolt 22 8T-4193

315C/B, 315 IDLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 2 113-2907 239-4344
Components of Group
Idler Assembly 1 115-4926 115-4926
Bearing 1 2 8E-4359 8E-4359
Shaft 1 9W-9451 246-5425
Bearing Block 2 115-3701 239-4362
Pin 2 9W-9455 9W-9455
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
Toric Ring 1 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 6V-7658 6V-7658
Plug 1 7H-3171 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

28
 Excavators/Front Shovels
315C, 315B, 315

315C/B, 315 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-5600
Components of Group
Roller Shell Assembly 1 8E-5602
1
Bearing 1 8E-6792
Bearing 1 8E-6793
Shaft 1 8E-5601
Retainer 1 8E-5606
Cover 1 8E-5605
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 8E-5608
Toric Ring 1 2 096-4279
Seal -- Shaft O-Ring 1 6V-7661
Plug 1 7H-3171
Mounting Hardware 2
Bolt 1 8T-5878
1 Component of preceding assembly or group
2 Not included in roller group; quantity shown is required to mount each roller.

315C/B, 315 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 12 1 163-4143
2
Double Flange (DF) - 163-4144
Components of Group
Roller Shell (SF) 1 8E-5032
Roller Shell (DF) 1 5Q-3215
3
Bearing 2 8E-5599
Shaft 1 8E-5035
End Collar 2 8E-5037
Retaining Ring 2 8E-5031
Pin 1 3E-3217
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 3 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Stopper 1 5G-2247
Plug 1 6Y-0473
4
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 14 rollers required with long undercarriage.
2 Used as required.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

29
 Excavators/Front Shovels
315C, 315B, 315

315C/B, 315 TRACK ROLLERS HEAVY DUTY

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) (Heavy Duty) -1 -- 2 206-1265
Components of Group
Roller Shell (SF) (Heavy Duty) 1 -- 3 209-3313
4
Bearing 2 8E-5599 8E-5599
Shaft 1 8E-5035 209-3312
End Collar 2 8E-5037 8E-5037
Pin 2 3E-3217 3E-3217
Seal -- Duo-Cone Group 2 9W-2142 206-9211
Toric Ring 4 2 8H-2265 162-2168
Seal -- Shaft O-Ring 2 7F-8268 7F-8268
Plug 1 6Y-0473 9W-2146
Mounting Hardware 5
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 Use as required.
2 Upgrade to 206-1265 Roller Group
3 Order 1--Roller Shell--209-3313 and 1-Plug 9W-2148
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

315C, 315B, 315 CENTER GUIDING GUARDS

USE WITH 6 AND 7 ROLLER, TRACK ROLLER FRAMES

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 240-2988
Bolt 8 8T-5460
Washer 8 8T-4123

315C, 315B, 315 TRACK GUIDING GUARDS (FRONT OR REAR)

USE WITH 7 ROLLER TRACK ROLLER FRAMES

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 111-0106
Bolt (20 mm) 12 8T-5460
Washer 12 8T-4123

30
 Excavators/Front Shovels
315C, 315B, 315

315C, 315B, 315 TRACK GUIDING GUARDS (FRONT)

USE WITH 6 ROLLER TRACK ROLLER FRAMES

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 111-0105
Bolt (20 mm) 8 8T-5460
Washer 8 8T-4123

315C, 315B, 315 TRACK GUIDING GUARDS (REAR)

USE WITH 6 ROLLER TRACK ROLLER FRAMES

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 111-0104
Bolt (20 mm) 8 8T-5460
Washer 8 8T-4123

31
 Excavators/Front Shovels
317BL, 317

317, 317N TRACK

4MM, 9SR
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 44 Section 2 -- 1 194-1134 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 43 9W-3137 9W-3137
LH Regular 43 9W-3138 9W-3138
Other Components
Pin 43 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 43 117-1371 190-3523
Master Bushing 1 117-1372 190-3524
Seal (Poly - W) 86 -- 158-4380
Seal - Master (Poly - W) 2 -- 158-4381
Seal (Spring Washer) 176 5S-0709 --
Spacer 2 5S-0754 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 3
Bolt 176 9W-3619 9W-3619
4
Bolt 176 6Y-0846 6Y-0846
Nut 176 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1134.
2 Stepped bushing design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

32
 Excavators/Front Shovels
317BL, 317

317BL, 317BLN TRACK

GREASE LUBRICATED
6DZ, 9WW
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 45 Section 2 -- 1 194-1609 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 44 9W-3137 9W-3137
LH Regular 44 9W-3138 9W-3137
Other Components
Pin 44 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 44 159-0950 190-3523
Master Bushing 1 117-1372 190-3524
Seal - (Poly-W) 88 158-4380 158-4380
Seal - Master (Poly-W) 2 158-4381 158-4381
Cotter Pin 1 095-0863 095-0863
3
Track Hardware
Bolt 4 180 9W-3619 9W-3619
Bolt 180 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1609.
2 Stepped Bushing Design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

317BL, 317BLN, 317, 317N TRACK SHOES

7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5062
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5063

317BL, 317BLN, 317, 317N SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 102-8134
Bolt 22 8T-4193

33
 Excavators/Front Shovels
317BL, 317

317BL, 317BLN, 317, 317N IDLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 2 113-2907 239-4344
Components of Group
Idler Assembly 1 115-4926 115-4926
1
Bearing 2 8E-4359 8E-4359
Shaft 1 9W-9451 246-5425
Bearing Block 2 115-3701 239-4362
Pin 2 9W-9455 9W-9455
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
1
Toric Ring 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 6V-7658 6V-7658
Plug 1 7H-3171 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

317BL, 317BLN, 317, 317N CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-5600
Components of Group
Roller Shell Assembly 1 8E-5602
1
Bearing 1 8E-6792
Bearing 1 8E-6793
Shaft 1 8E-5601
Retainer 1 8E-5606
Cover 1 8E-5605
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 8E-5608
Toric Ring 1 2 096-4279
Shaft O-Ring 1 6V-7661
Plug 1 7H-3171
Mounting Hardware 2
Bolt 1 8T-5878
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

34
 Excavators/Front Shovels
317BL, 317

317BL, 317BLN, 317, 317N TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 163-4143
1
Double Flange (DF) - 163-4144
Components of Group
Roller Shell (SF) 1 8E-5032
Roller Shell (DF) 1 5Q-3215
Bearing 2 2 8E-5599
Shaft 1 8E-5035
End Collar 2 8E-5037
Retaining Ring 2 8E-5031
Pin 1 3E-3217
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 2 2 162-2168
Seal -- Shaft O-Ring 2 7F-8268
Stopper 1 5G-2247
Plug 1 6Y-0473
3
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 Use as required.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

317BL, 317BLN, 317, 317N TRACK ROLLERS HEAVY DUTY

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) (Heavy Duty) -1 -- 2 206-1265
Components of Group
Roller Shell (SF) (Heavy Duty) 1 -- 3 209-3313
4
Bearing 2 8E-5599 8E-5599
Shaft 1 8E-5035 209-3312
End Collar 2 8E-5037 8E-5037
Pin 2 3E-3217 3E-3217
Seal -- Duo-Cone Group 2 9W-2142 206-9211
Toric Ring 4 2 8H-2265 162-2168
Seal -- Shaft O-Ring 2 7F-8268 7F-8268
Plug 1 6Y-0473 9W-2146
Mounting Hardware 5
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 Use as required.
2 Upgrade to 206-1265 Roller Group
3 Order 1--Roller Shell--209-3313 and 1-Plug 9W-2148
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

35
Excavators/Front Shovels
317BL, 317

317BL, 317BLN CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 117-5553
Bolt 8 8T-5460
Washer 8 8T-4123

317, 317N CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 111-0106
Bolt 24 8T-5460
Washer 24 8T-4123

36
 Excavators/Front Shovels
318C, 318B

318CL, 318CLN TRACK

GREASED LUBRICATED
CWP, GPA, MDY
7.50" (190.5 mm) PITCH - 20 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 47 Section 2 195-9343
Components of Link Assembly
Track Links
RH Master 1 8E-8585
LH Master 1 8E-8586
RH Regular 46 9W-3137
LH Regular 46 9W-3138
Other Components
Pin 46 6Y-8186
Master Pin 1 188-3064
Bushing 46 190-3523
Master Bushing 1 190-3524
Seal (Poly - W) 92 158-4380
Seal - Master (Poly - W) 2 158-4381
Cotter Pin 1 095-0863
1
Track Hardware
Bolt 188 9W-3619
2
Bolt 188 6Y-0846
Nut 188 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 246-1906
1 Not part of link assembly; required to assemble track group.
2 For use with Extreme Service and Double Grouser Track Shoes.

37
 Excavators/Front Shovels
318C, 318B

318CL TRACK
GREASED LUBRICATED
DAH
7.50" (190.5 mm)PITCH - 20 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 49 Section 2 194-1608
Components of Link Assembly
Track Links
RH Master 1 8E-8585
LH Master 1 8E-8586
RH Regular 48 9W-3137
LH Regular 48 9W-3138
Other Components
Pin 48 6Y-8186
Master Pin 1 188-3064
Bushing 48 190-3523
Master Bushing 1 190-3524
Seal (Poly - W) 96 158-4380
Seal - Master (Poly - W) 2 158-4381
Cotter Pin 1 095-0863
1
Track Hardware
Bolt 196 9W-3619
2
Bolt 196 6Y-0846
Nut 196 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 246-1906
1 Not part of link assembly; required to assemble track group.
2 For use with Extreme Service and Double Grouser Track Shoes.

38
 Excavators/Front Shovels
318C, 318B

318C, 318BL, 318BN TRACK

GREASE LUBRICATED
ADC, AEJ, BTG, FAA
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 194-1609 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 44 9W-3137 9W-3137
LH Regular 44 9W-3138 9W-3138
Other Components
Pin 44 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 44 159-0950 190-3523
Master Bushing 1 117-1372 190-3524
Seal (Poly - W) 88 158-4380 158-4380
Seal - Master (Poly - W) 2 158-4381 158-4381
Cotter Pin 1 095-0863 095-0863
3
Track Hardware
Bolt 180 9W-3619 9W-3619
4
Bolt 180 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1609.
2 Stepped bushing design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

39
 Excavators/Front Shovels
318C, 318B

318B, 318BL, 318BN TRACK

SEALED
3LR, 5BJ, 7KZ
7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 45 Section 2 -- 1
Components of Link Assembly
Track Links
RH Master 1 8E-8585
LH Master 1 8E-8586
RH Regular 44 9W-3137
LH Regular 44 9W-3138
Other Components
Pin 44 6Y-8186
Master Pin 1 188-3064
Bushing 44 117-1371
Master Bushing 1 117-1372
Seal (Spring Washer) 180 5S-0709
Spacer 2 5S-0754
Cotter Pin 1 095-0863
2
Track Hardware
Bolt 180 9W-3619
3
Bolt 180 6Y-0846
Nut 180 9W-3361
Special Group
Pin and Bushing Group (50 Sections) 1 137-4123
1 Upgrade to 194-1609.
2 Not part of link assembly; required to assemble track group.
3 For use with Extreme Service and Double Grouser Track Shoes.

318C/B, 318BL, 318BN TRACK SHOES

7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5062
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351
Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133

40
 Excavators/Front Shovels
318C, 318B

318BL, 318BN SPROCKETS

GREASE LUBRICATED
ADC, AEJ

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 102-8134
Bolt 22 8T-4183

318C/B, 318BL, 318BN SPROCKETS

GREASED CWP, GPA, MDY
SEALED 3LR, 5BJ, 7KZ

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 8E-9805
Bolt 16 7X-2562

318C/B, 318BL, 318BN IDLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 2 113-2907 239-4344
Components of Group
Idler Assembly 1 115-4926 115-4926
1
Bearing 2 8E-4359 8E-4359
Shaft 1 9W-9451 246-5425
Bearing Block 2 115-3701 239-4362
Pin 2 9W-9455 9W-9455
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
1
Toric Ring 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 6V-7658 6V-7658
Plug 1 7H-3171 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

41
 Excavators/Front Shovels
318C, 318B

318C/B, 318BL, 318BN CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-5600
Components of Group
Roller Shell Assembly 1 8E-5602
1
Bearing 1 8E-6792
Bearing 1 8E-6793
Shaft 1 8E-5601
Retainer 1 8E-5606
Cover 1 8E-5605
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 8E-5608
Toric Ring 1 2 096-4279
Shaft O-Ring 1 6V-7661
Plug 1 7H-3171
Mounting Hardware 2
Bolt 1 8T-5878
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

318C/B, 318BL, 318BN TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 163-4143
1
Double Flange (DF) - 163-4144
Components of Group
Roller Shell (SF) 1 8E-5032
Roller Shell (DF) 1 5Q-3215
2
Bearing 2 8E-5599
Shaft 1 8E-5035
End Collar 2 8E-5037
Retaining Ring 2 8E-5031
Pin 1 3E-3217
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 2 2 162-2168
Seal -- Shaft O-Ring 2 7F-8268
Stopper 1 5G-2247
Plug 1 6Y-0473
3
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 Use as required.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

42
 Excavators/Front Shovels
318C, 318B

318C/B, 318BL, 318BN TRACK ROLLERS HEAVY DUTY

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) (Heavy Duty) -1 -- 2 206-1265
Components of Group
Roller Shell (SF) (Heavy Duty) 1 -- 3 209-3313
4
Bearing 2 8E-5599 8E-5599
Shaft 1 8E-5035 209-3312
End Collar 2 8E-5037 8E-5037
Pin 2 3E-3217 3E-3217
Seal -- Duo-Cone Group 2 9W-2142 206-9211
Toric Ring 4 2 8H-2265 162-2168
Seal -- Shaft O-Ring 2 7F-8268 7F-8268
Plug 1 6Y-0473 9W-2146
Mounting Hardware 5
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 Use as required.
2 Upgrade to 206-1265 Roller Group
3 Order 1--Roller Shell--209-3313 and 1-Plug 9W-2148
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

318C CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 240-2988
Bolt 8 8T-5460
Washer 8 8T-4123

318B, 318BL, 318BN CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 117-5553
Bolt 8 8T-5460
Washer 8 8T-4123

43
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

321D, 321C, 320D, 320C TRACK

GREASE LUBRICATED
AKH, AMC, APA, BCB, BDC, BEF, CLM, BPR, BCN, GLA, CCD, FBA, FBB, MAA, DAX, JCX, AZR, DWZ, FAL, AGF,
MCH, EBT, WFD, CXY, DFT, RBL, KGL, SNS, AMR, YDS, GNG, MAB, RAW, JGZ
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 45 Section 2 -- 1 194-1609 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 44 9W-3137 9W-3137
LH Regular 44 9W-3138 9W-3138
Other Components
Pin 44 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 44 159-0950 190-3523
Master Bushing 1 117-1372 190-3524
Seal (Poly - W) 88 158-4380 158-4380
Seal - Master (Poly -W ) 2 158-4381 158-4381
Cotter Pin 1 095-0863 095-0863
3
Track Hardware
Bolt 180 9W-3619 9W-3619
Bolt 4 180 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1609.
2 Stepped Bushing Design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

44
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

323DL, 321DL, 321CL, 320DL, 320CL, 319D, 319C, TRACK

GREASE LUBRICATED
ALF, ALX, ANB, BDB, JPL, PAA, PAB, GAA, GAB, HBC, BDE, BEA, BER, BKK, CLZ, BRX, KBB, MCF, KGL, BGB,
BZH, DAY, EAW, FMH, KBH, MDT, NAS, PBD, BYM, JLG, CYD, RAC, PBM, SDC, NDE, BWP, CWN, ZGB, DHK,
WJN, TAE, KAF, BZF, SCW, PHX, A9F, EBY, KGF, A8F, FXF, XCF, FNA, DFB, EAG, HKT, MDE
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 49 Section 2 -- 1 194-1608 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 48 9W-3137 9W-3137
LH Regular 48 9W-3138 9W-3138
Other Components
Pin 48 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 48 159-0950 190-3523
Master Bushing 1 117-1372 190-3524
Seal (Poly - W) 96 158-4380 158-4380
Seal - Master (Poly - W) 2 158-4381 158-4381
Cotter Pin 1 095-0863 095-0863
3
Track Hardware
Bolt 196 9W-3619 9W-3619
4
Bolt 196 6Y-0846 6Y-0846
Nut 196 9W-3361 9W-3361
Special Group
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 194-1608.
2 Stepped bushing design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

45
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

320DL, 320CL TRACK HEAVY DUTY

SAH, GKS, BWW, SRT, EAX
7.50" (190.5 mm) PITCH - 3/4" BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- (50 Sections) 2 206-1469
Components of Link Assembly
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 49 106-1625
LH Regular 49 106-1626
Other Components
Pin 50 206-1470
Bushing 50 106-1618
Seal Assembly (Rigid) 100 250-3988
Thrust Ring 100 152-8070
1
Track Hardware
Bolt 196 6V-1792
Nut 196 1S-1860
Master Bolt 2 106-1642
Master Bolt 2 107-0719
1 Not part of link assembly; required to assemble track group.

46
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

320B, 320BL, 320BN, 320, 320N, 320L TRACK

45 SECTION: 1XM, 2DL, 3MR, 3RK, 3XM, 4FS, 4ZJ, 5BR, 7GJ, 7WK, 8LK, 9WG, 8ES
49 SECTION: 1KL, 1TL, 3XK, 4BK, 4JM, 4MR, 5CS, 6CR, 8HJ, 9KK, 9CS
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED 45 49
PART NUMBER SECTION SECTION
Link Assembly (Quantity 2) -- 1 -- 2
Components of Link Assembly
Track Links
RH Master 8E-8585 1 1
LH Master 8E-8586 1 1
RH Regular 9W-3137 44 48
LH Regular 9W-3138 44 48
Other Components
Pin 6Y-8186 44 48
Master Pin 188-3064 1 1
Bushing 117-1371 44 48
Master Bushing 117-1372 1 1
Seal (Spring Washer) 5S-0709 180 196
Spacer 5S-0754 2 2
Cotter Pin 095-0863 1 1
3
Track Hardware
Bolt 9W-3619 180 196
Bolt 4 6Y-0846 180 196
Nut 9W-3361 180 196
Special Group
Pin and Bushing Group (50 Sections) 137-4123 1 1
1 Upgrade to 194-1609.
2 Upgrade to 194-1608.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

47
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK SHOES
7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 106-0614
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 106-0615
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 106-0616
Triple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5062
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351
Triple Grouser (Center Punched Slots) 34.5" (900 mm) 9W-9352
Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133
Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0134
Triple Grouser (Heavy Duty, Center Punched Slots) 25.6" (650 mm) 1Q-4772
Triple Grouser (Heavy Duty, Center Punched Slots) 27.6" (700 mm) 121-0135
Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6304
Self-Cleaning 31.5" (800 mm) 8E-8835

320D, 320C HEAVY DUTY TRACK SHOES

7.50" (190.5 mm) PITCH - 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Extreme Service (Trapezoidal Opening) (Clipped Grouser) 24" (610 mm) 207-4873 207-4874
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 224-7269 224-7732
Double Grouser (Trapezoidal Opening) 27.5" (700 mm) 206-1479 206-1480
Triple Grouser 27.5" (700 mm) 224-7270 224-7733

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 8E-9805
Bolt 16 7X-2562 1
1 Use 8T-5460 bolts on 319C machines.

320C, 320B, 320, SPROCKET

USE WITH HEAVY DUTY LINK ASSEMBLY

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 235-5260
Bolt 16 7X-2562

48
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

320C SPROCKETS
BGB

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) (Use with 325 final drive) 1 187-6540
Bolt 18 7X-2562

320D, 320C SPROCKETS

USE WITH HEAVY DUTY LINK ASSEMBLY
SAH, GKS, BWW, SRT, EAX

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) (Use with 325 final drive) 1 221-0010
Bolt 18 7X-2562

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 IDLERS

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 2 113-2907 248-7143
Components of Group
Idler Assembly 1 262-4781 262-4781
Bearing 1 2 8E-4359 8E-4359
Shaft 1 9W-9451 246-5425
Bearing Block 2 115-3701 239-4362
Pin 2 9W-9455 9W-9455
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
Toric Ring 1 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 6V-7658 6V-7658
Plug 1 7H-3171 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

49
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-5600
Components of Group
Roller Shell Assembly 1 8E-5602
1
Bearing 1 8E-6792
1
Bearing 1 8E-6793
Shaft 1 8E-5601
Retainer 1 8E-5606
Cover 1 8E-5605
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 8E-5608
Toric Ring 1 2 096-4279
Seal -- Shaft O-Ring 1 6V-7661
Plug 1 7H-3171
Mounting Hardware 2
Bolt 1 8T-5878
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

50
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) - 163-4143
2
Double Flange (DF) - 163-4144
Components of Group
Roller Shell (SF) 1 8E-5032
Roller Shell (DF) 1 5Q-3215
Bearing 3 2 8E-5599
Shaft 1 8E-5035
End Collar 2 8E-5037
Retaining Ring 2 8E-5031
Pin 1 3E-3217
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 3 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Stopper 1 5G-2247
Plug 1 6Y-0473
4
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 14 Single flange roller groups used of the following machines: BCN, CCD, FBA, FBB, AKH, AMC, APA, BDC, CLM, BPR, DAX, JCX, MCH, WFD,
RBL, YDS, DWZ, AMR, AZR, CXY, DFT, GKL, FAL, AGF. 16 Single flange roller groups used of the following machines: GLA, GAA, GAB, HBC,
PAB, BDE, BEA, ALF, ALX, ANB, BER, BRX, CLZ, KBB, MCF, KGL, BZH, DAY, EAW, FMH, KBH, MDT, NAS, PBD, BYM, JLG, CYD, RAC, PBM,
SDC, NDE, SRT, ZGB, TAE, SCW, EBY, KGF, FXF, DFB, KAF, BWP, CWN, DHK, FXK, PHX, XCK, A9F, A8F.
2 Use as required.
3 Component of preceding assembly or group; quantity shown is quantity per assemly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

51
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

320D, 320C TRACK ROLLERS

BCB, MAA, BEF, EBT, SNS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 8 163-4143
Double Flange (DF) 6 163-4144
Components of Group
Roller Shell (SF) 1 8E-5032
Roller Shell (DF) 1 5Q-3215
Shaft 1 8E-5035
End Collar 2 8E-5037
Retaining Ring 2 8E-5031
Pin 1 3E-3217
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 1 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Stopper 1 5G-2247
Plug 1 6Y-0473
2
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 Component of preceding assembly or group; quantity shown is quantity per assemly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

52
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

320DL, 320CL TRACK ROLLERS

BDB, PAA, BBC, WJN, FNA

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 8 163-4143
Double Flange (DF) 8 163-4144
Components of Group
Roller Shell (SF) 1 8E-5032
Roller Shell (DF) 1 5Q-3215
Shaft 1 8E-5035
End Collar 2 8E-5037
Retaining Ring 2 8E-5031
Pin 1 3E-3217
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 1 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Stopper 1 5G-2247
Plug 1 6Y-0473
2
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 Component of preceding assembly or group; quantity shown is quantity per assemly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

53
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK ROLLERS HEAVY DUTY
Standard of these serial number machines: SAH, BGB, BKK, JPL, GKS, BWW, BZF, EAX (16 required)
Optional use for all other 319, 320, 321, 323 machines

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) (Heavy Duty) -1 -- 2 206-1265
Components of Group
Roller Shell (SF) (Heavy Duty) 1 -- 3 209-3313
4
Bearing 2 8E-5599 8E-5599
Shaft 1 8E-5035 209-3312
End Collar 2 8E-5037 8E-5037
Pin 2 3E-3217 3E-3217
Seal -- Duo-Cone Group 2 9W-2142 206-9211
4
Toric Ring 2 8H-2265 162-2168
Seal -- Shaft O-Ring 2 7F-8268 7F-8268
Plug 1 6Y-0473 9W-2146
5
Mounting Hardware
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 Use as required.
2 Upgrade to 206-1265 Roller Group
3 Order 1--Roller Shell--209-3313 and 1-Plug 9W-2148
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 240-2988
Bolt 8 8T-5460
Washer 8 8T-4123

320C CENTER GUIDING GUARDS

JPL

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 206-8961
Bolt 8 8T-5460
Washer 8 8T-4123

54
 Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

321D, 320D, 320C TRACK ROLLER GUARD (FULL LENGTH)

Use with 45 section link assembly

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 219-8468
Bolt (M 20) 24 8T-5460
Washer 24 8T-4123

323DL, 321DL, 319DL, 320DL, 320CL TRACK ROLLER GUARDS (FULL LENGTH)
Use with 49 section link assembly

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 219-8469
Bolt (M 20) 32 8T-5460
Washer 32 8T-4123

320DL, 320CL TRACK ROLLER GUARDS (FULL LENGTH)

Use with Heavy Duty Track
SAH, EAX

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 226-5369
Bolt 32 8T-5460
Washer 32 8T-4123

321D, 320D, 320C SPROCKET REAR GUARDS

Use with 45 section link assembly

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 219-8468
Bolt (M 20) 12 8T-5460
Washer 12 8T-4123

323DL, 321DL, 319DL, 320DL, 320CL SPROCKET REAR GUARDS

Use with 49 section link assembly

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 219-8469
Bolt (M 20) 16 8T-5460
Washer 16 8T-4123

55
Excavators/Front Shovels
323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

320DL, 320LC SHOE SUPPORT GUARDS

BGB, BZF

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 186-5502
Guard Assembly 4 186-5503
Bolt (M 20) 32 8T-5460
Bolt (M 20) 32 8T-6430
Washer 64 8T-4123
Bar 16 5Q-3369

320DL Shoe Support Guards, Heavy Duty Track

GKS, EAX

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 284-7361
Guard Assembly 4 284-7362
Bolt (M 20) Guard Assembly to Frame 32 8T-6430
Washer 32 8T-4123
Bar 16 5Q-3369
Bolt (M 20) 32 8T-5460
Washer 32 8T-4123

56
 Excavators/Front Shovels
323DS, 320CS, 320BS, 320S

323DS, 320CS, 320BS TRACK

SLIP FIT MASTER LINKS
5MS, BBL, SED, DKW
8.00" (203.2 mm) PITCH -20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 201-9116
Components of Link Assembly
Track Links
RH Master 1 115-1853 115-1853
LH Master 1 115-1854 115-1854
RH Regular 44 6Y-1607 6Y-1607
LH Regular 44 6Y-1608 6Y-1608
Other Components
Pin 44 6Y-0851 6Y-0851
Master Pin (Slip Fit) 1 188-3065 188-3065
Bushing 44 179-0695 201-0825
Master Bushing 1 179-0693 201-0826
Seal (Ploy W) 88 -- 179-3425
Seal - Master (Poly W) 2 -- 179-3427
Seal (Spring Washer) 180 6Y-0852 --
Spacer 2 6Y-0847 --
Cotter 1 095-7944 095-7944
Track Hardware 2
Bolt 180 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group
Pin and Bushing Group (48 Sections) (Contains Press Fit Master Pin) 1 137-4124 246-1907
1 Upgrade to 201-9116 link assembly.
2 Not part of link assembly; required to assemble track group.

57
 Excavators/Front Shovels
323DS, 320CS, 320BS, 320S

320S TRACK
PRESS FIT MASTER LINKS
6KM
8.00" (203.2 mm) PITCH -- 20 mm BOLT

SEALED GREASED
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 213-1933
Components of Link Assembly
Track Links
RH Regular 45 6Y-1607 6Y-1607
LH Regular 45 6Y-1608 6Y-1608
Other Components
Pin 44 6Y-0851 6Y-0851
Master Pin (Press Fit) 1 6Y-0850 6Y-0850
Bushing 44 179-0695 201-0825
Master Bushing 1 179-0693 201-0826
Seal (Ploy W) 88 -- 179-3425
Seal - Master (Poly W) 2 -- 179-3427
Seal (Spring Washer) 180 6Y-0852 --
Spacer 2 6Y-0847 --
2
Track Hardware
Bolt 180 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group 2
Pin and Bushing Group (48 Sections) 1 137-4124 246-1907
1 Upgrade to 213-1933 link assembly.
2 Not part of link assembly; required to assemble track group.

323DS, 320CS, 320BS, 320S TRACK SHOES

8.00" (203.2 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Offset RH) 21.7" (550 mm) 126-5304
Triple Grouser (Offset LH) 21.7" (550 mm) 126-5305

323DS, 320CS, 320BS, 320S SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 6Y-4898
Bolt 18 8T-6430
Washer 18 8T-3282

58
 Excavators/Front Shovels
323DS, 320CS, 320BS, 320S

323DS, 320CS, 320BS IDLERS

5MS, BBL, SED

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 115-3696
Components of Group
Idler Assembly 1 115-7471
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Block 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

320S IDLERS
6KM

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 102-8155
Components of Group
Idler Assembly 1 115-7471
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Block 2 7I-7767
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

59
 Excavators/Front Shovels
323DS, 320CS, 320BS, 320S

323DS, 320CS, 320BS, 320S CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6Y-5323
Components of Group
Roller Shell Assembly 1 6Y-9859
1
Bearing 1 6Y-9855
Bearing 1 6Y-9856
Shaft 1 6Y-9858
Retainer 1 6Y-8075
Thrust Washer 1 6Y-8076
Cover 1 6Y-8077
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 179-1292
Toric Ring 1 2 1M-3097
Seal -- Shaft O-Ring 1 5H-8848
Plug 1 7H-3171
2
Mounting Hardware
Bolt 1 8T-5878
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

320CS, 320BS, 320S TRACK ROLLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Single Flange (SF) 14 -- 1 163-4147
Components of Group
Roller Shell (SF) 1 6Y-1056 6Y-1056
2
Bearing 2 6Y-1782 6Y-1782
Shaft 1 6Y-1053 158-8089
End Collar 2 6Y-1054 158-8086
Retaining Ring 1 6Y-6201 158-8096
Pin 1 9W-2204 159-9526
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
2
Toric Ring 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 8F-6711 8F-6711
Stopper 1 5G-2247 5G-2247
Plug 1 6Y-0473 6Y-0473
3
Mounting Hardware
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 Upgrade to 163-4147 Roller GP
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

60
 Excavators/Front Shovels
323DS, 320CS, 320BS, 320S

323DS TRACK ROLLERS HEAVY DUTY

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 206-1264
Components of Group
Roller Shell (SF) 1 206-9257
1
Bearing 2 6Y-1782
Shaft 1 206-9260
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group 2 206-9212
1
Toric Ring 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 7X-2565
Washer 4 8T-4123
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

323DS, 320CS, 320BS, 320S CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 7Y-2581
Bolt 8 7X-2563
Washer 8 8T-4123
Spacer 8 8V-1715

323DS TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 119-4554
Guard Assembly 4 119-4553
Bolt (M20) (Guard Assemblies to Frame) 24 8T-5460
Washer 24 8T-5439
Pipe 12 117-5612
Bolt (M 20) 12 7X-2440
Washer 24 8T-5439
Support Assembly 12 186-5564

61
Excavators/Front Shovels
323DS, 320CS, 320BS, 320S

323DS SPROCKET REAR GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 119-4554
Guard Assembly 2 119-4553
Bolt (M20) (Guard Assemblies to Frame) 12 8T-5460
Washer 12 8T-5439
Pipe 6 117-5612
Bolt (M 20) 6 7X-2440
Washer 12 8T-5439
Support Assembly 6 186-5564

62
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D, 322C/B, 322, 322N TRACK

ADX, BFN, BLP, BNY, HEK, 3NR, 7WL, 8MR, CJX, AWN, ECH
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 47 Section 2 -- 1 195-9343 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 46 9W-3137 9W-3137
LH Regular 46 9W-3138 9W-3138
Other Components
Pin 46 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 46 117-1371 190-3523
Master Bushing 1 117-1372 190-3524
Seal-(Poly-w) 92 -- 158-4380
Seal-Master(Poly-w) 2 -- 158-4381
Seal (Spring Washer) 188 5S-0709 --
Spacer 2 5S-0754 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 3
Bolt 188 9W-3619 9W-3619
4
Bolt 188 6Y-0846 6Y-0846
Nut 188 9W-3361 9W-3361
Special Group
Pin and Bushing Group (50 Sections) 1 137-4123 --
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 195-9343.
2 Stepped bushing design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

63
 Excavators/Front Shovels
324D, 322C, 322B, 322

324DL, 322CL, 322BL, 322BLN, 322L, 322LN TRACK

BMX, BTE, BFX, BKM, BKJ, EMR, BFK, BPH, 1YS, 1ZS, 2ES, 4RM, 5CR, 8CL, 8NR, 9RL, BGR, M2H, DFP, SYM,
T2D, LAB, JJG, BYE, EJC
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 51 Section 2 -- 1 195-9344 2
Components of Link Assembly
Track Links
RH Master 1 8E-8585 8E-8585
LH Master 1 8E-8586 8E-8586
RH Regular 50 9W-3137 9W-3137
LH Regular 50 9W-3138 9W-3138
Other Components
Pin 50 6Y-8186 6Y-8186
Master Pin 1 188-3064 188-3064
Bushing 50 117-1371 190-3523
Master Bushing 1 117-1372 190-3524
Seal (Poly - W) 100 -- 158-4380
Seal - Master (Poly - W) 2 -- 158-4381
Seal (Spring Washer) 204 5S-0709 --
Spacer 2 5S-0754 --
Cotter Pin 1 095-0863 095-0863
Track Hardware 3
Bolt 204 9W-3619 9W-3619
4
Bolt 204 6Y-0846 6Y-0846
Nut 204 9W-3361 9W-3361
Special Group 3
Pin and Bushing Group (50 Sections) 1 137-4123 --
Pin and Bushing Group (51 Sections) 1 -- 246-1906
1 Upgrade to 195-9344.
2 Stepped bushing design.
3 Not part of link assembly; required to assemble track group.
4 For use with Extreme Service and Double Grouser Track Shoes.

64
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D HEAVY DUTY TRACK

JLS, JKR
8.00" (203.2 mm) PITCH - 20 mm BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- (48 Sections) 2 213-1932
Components of Link Assembly
Track Links
RH Regular 48 6Y-1607
LH Regular 48 6Y-1608
Other Components
Pin 47 6Y-0851
Master Pin (Press Fit) 1 6Y-0850
Bushing 47 201-0825
Master Bushing 1 201-0826
Seal (Poly W) 94 179-3425
Seal - Master (Poly - W) 2 179-3427
1
Track Hardware
Bolt 192 6Y-0846
Nut 192 9W-3361
1 Not part of link assembly; required to assemble track group.

65
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D LGP HEAVY DUTY TRACK

JGK
8.00" (203.2 mm) PITCH - 3/4" BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- (53 Sections) 2 200-4273
Components of Link Assembly
Track Links
RH Master 1 266-7271
LH Master 1 266-7272
RH Regular 52 8E-7405
LH Regular 52 8E-7406
Other Components
Pin 52 198-1125
Master Pin 1 265-5109
Bushing 52 8E-7222
Master Bushing 1 269-4027
Seal Assembly 104 207-0544
Seal Assembly - Master 2 269-7103
Thrust Ring 104 152-8071
Thrust Ring - Master 2 269-4004
Track Hardware 1
Bolt 212 6V-1792
Nut 212 1S-1860
1 Not part of link assembly; required to assemble track group.

66
 Excavators/Front Shovels
324D, 322C, 322B, 322

322CL HEAVY DUTY TRACK

CAM, CBY, LAR, C3R,
8.00" (203.2 mm)PITCH - 20 mm BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- (48 Sections) 2 201-9117
Components of Link Assembly
Track Links
RH Master 1 115-1853
LH Master 1 115-1854
RH Regular 47 6Y-1607
LH Regular 47 6Y-1608
Other Components
Pin 47 6Y-0851
Master Pin (Slip Fit) 1 188-3065
Bushing 47 201-0825
Master Bushing 1 201-0826
Seal (Poly W) 94 179-3425
Seal - Master (Poly - W) 2 179-3427
Cotter 1 095-7944
1
Track Hardware
Bolt 192 6Y-0846
Nut 192 9W-3361
1 Not part of link assembly; required to assemble track group.

324D, 322C/B, 322 TRACK SHOES

7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 106-0614
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 106-0615
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 106-0616
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 6I-9453
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351
Triple Grouser (Center Punched Slots) 35.4" (900 mm) 9W-9352
Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133
Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0134
Triple Grouser (Heavy Duty) 25.6" (650 mm) 1Q-4772
Triple Grouser (Heavy Duty, Center Punched Slots) 27.6" (700 mm) 121-0135
Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6304
Self-Cleaning 31.5" (800 mm) 8E-8835

67
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D, 322C TRACK SHOES HEAVY DUTY

CAM, CBY, LAR, C3R, JLS, JKR
8.00" (203.2 mm) PITCH - 20 mm BOLT

TYPE WIDTH PART NUMBER

Double Grouser 23.6" (600 mm) 8E-8812
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 152-8628
Double Grouser 27.5" (700 mm) 8E-8814
Double Grouser (Trapezoidal Opening) 27.5" (700 mm) 3Q-6993
Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6305

324D TRACK SHOES HEAVY DUTY

JGK
8.00" (203.2 mm) PITCH - 3/4" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Heavy Duty, Center Punched Slots) (Tri) (RH) 35.4" (900 mm) 300-6457
Triple Grouser (Heavy Duty, Center Punched Slots) (Tri) (LH) 35.4" (900 mm) 300-6458

324D, 322C/B, 322 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 8E-9805
Bolt 16 7X-2562

324D, 322C SPROCKETS

CAM, CBY, LAR, C3R, JLS, JKR

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 6Y-4898
Bolt 18 8T-6430
1
Washer 18 8T-3282
1 For 322C machines only.

324D, SPROCKET (JGK) USE WITH D6R LINKS

USE WITH HEAVY DUTY LINKS
JGK

QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 200-4197
Bolt 18 8T-6430

68
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D, 322C/B, 322 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 115-6337
Components of Group
Idler Assembly 1 115-4931
1
Bearing 2 6I-9587
Shaft 1 6I-9597
Bearing Block 2 115-6338
Pin 2 9W-9455
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 1H-5728
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

324D, 322C IDLERS

CAM, CBY, LAR, C3R, JGK, JLS, JKR

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 115-3696
Components of Group
Idler Assembly 1 115-7471
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Block 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

69
 Excavators/Front Shovels
324D, 322C, 322B, 322

322C IDLERS
BPH

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 194-1130 1
Components of Group
Idler Assembly 1 115-4931
2
Bearing 2 6I-9587
Shaft 1 6I-9597
Bearing Block 2 194-1131
Pin 2 9W-9455
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 2 2 6Y-2270
Seal -- Shaft O-Ring 2 1H-5728
Plug 1 7H-3171
1 Not serviced
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

324D, 322C/B, 322 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-5600
Components of Group
Roller Shell Assembly 1 8E-5602
1
Bearing 1 8E-6792
Bearing 1 8E-6793
Shaft 1 8E-5601
Retainer 1 8E-5606
Cover 1 8E-5605
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 8E-5608
Toric Ring 1 2 096-4279
Shaft O-Ring 1 6V-7661
Plug 1 7H-3171
Mounting Hardware 2
Bolt 1 8T-5878
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

70
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D, 322C CARRIER ROLLERS

CAM, CBY, LAR, C3R, JLS, JKR

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 4 247-0565
Components of Group
Roller Shell (SF) 1 6Y-1056
1
Bearing 2 6Y-1782
Shaft 1 247-0564
End Collar 2 158-8086
Ring Retaining 2 158-8096
Pin 1 159-9526
Seal -- Duo-Cone Group 2 9W-2201
1
Toric Ring 2 6H-1309
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 5G-2247
Plug 1 6Y-0473
Mounting Hardware 2
Bolt 4 7T-2565
Washer 4 8T-4123
1 Component of preceding assembly or group; quantity shown is quantity per assembly of group.
2 Not included in roller group; quantity shown is required to mount each roller.

324D CARRIER ROLLERS

JGK

PER MACHINE QUANTITY PART NUMBER

Single Flange (SF) (Heavy Duty) 6 206-1264
Components of Group
Roller Shell (SF) (Heavy Duty) 1 206-9257
Shaft 1 206-9260
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group 2 206-9212
Toric Ring 1 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 7X-2565
Washer 4 8T-4123
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

71
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D, 322C/B, 322 TRACK ROLLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Single Flange (SF) -- 1 -- 2 163-4145
3
Double Flange (DF) - -- 163-4146
Components of Group
Roller Shell (SF) 1 6I-9398 6I-9398
Roller Shell (DF) 1 -- 130-9285
Bearing 4 2 6I-9399 6I-9399
Shaft 1 6I-9397 163-7393
End Collar 2 6Y-1054 158-8086
Retaining Ring 1 6Y-6201 158-8096
Pin 1 9W-2204 159-9526
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
4
Toric Ring 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 8F-6711 8F-6711
Stopper 1 5G-2247 5G-2247
Plug 1 6Y-0473 6Y-0473
5
Mounting Hardware
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 14 Single flange roller groups used on the following machines: ADX, BLP, BNY, HEK, CJX, AWN. 16 Single flange roller groups used on the
following machines: BMX, BTE, BKM, BKJ, EMR, BFK, BGR, DFP, SYM, T2D, LAB, JJG, BYE, EJC. 8 Single flange roller groups and 6 double
flange roller groups used on the following machine: BFN, ECH. 8 Single flange roller groups and 8 double flange roller groups used on the
following machine: BFX.
2 Upgrade to 163-4145 Roller GP
3 Used as required.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

72
 Excavators/Front Shovels
324D, 322C, 322B, 322

324D TRACK ROLLERS HEAVY DUTY

JLS 18 Single Flange Rollers Required
JGK 20 Double Flange Rollers Required

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) (Heavy Duty) -- 206-1264
Double Flange (DF) (Heavy Duty) -- 2 206-1263
Components of Group
Roller Shell (SF) (Heavy Duty) 1 206-9257
Roller Shell (DF) (Heavy Duty) 1 206-1262
Bearing 2 6Y-1782
Shaft 1 206-9260
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group 2 206-9212
3
Toric Ring 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 4
Bolt 4 7X-2565
Washer 4 8T-4123
1 18 required machine serial number JLS.
2 20 required for machine serial number JGK.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

73
 Excavators/Front Shovels
324D, 322C, 322B, 322

322C/B, 322 TRACK ROLLERS HEAVY DUTY

Standard on the BPH (16 Required)
CAM, CBY (Use 325 Heavy Duty Single Flange 18 Required)
Optional use for all other 322 machines

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) -- 197-4161
Components of Group
Roller Shell (SF) 1 205-3594
2
Bearing 2 6I-9399
Shaft 1 200-6432
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group 2 206-9212
2
Toric Ring 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 3
Bolt 4 7X-2565
Washer 4 8T-4123
1 Use as required
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

324D, 324DL CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 260-2276
Bolt 8 7X-2563
Washer 8 8T-4123
Spacer 8 8V-1715

322C CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 240-2988
Bolt 8 7X-2563
Washer 8 8T-4123
Spacer 8 8V-1715

74
 Excavators/Front Shovels
324D, 322C, 322B, 322

322B CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 117-5553
Bolt 8 7X-2563
Washer 8 8T-4123
Spacer 8 8V-1715

322 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 117-5418
Bolt 8 8T-5460
Washer 8 8T-4123

324D TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 260-2277
Bolt (M 20) 24 8T-5460
Washer 24 8T-4123

324DL TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 260-2278
Bolt (M 20) 32 8T-5460
Washer 32 8T-4123

322C TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 226-5369
Bolt (M 20) 32 8T-5460
Washer 32 8T-4123

75
Excavators/Front Shovels
324D, 322C, 322B, 322

324D TRACK ROLLER GUARDS (SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 260-2277
Bolt (M 20) 12 8T-5460
Washer 12 8T-4123

324DL TRACK ROLLER GUARDS (SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 260-2278
Bolt (M 20) 16 8T-5460
Washer 16 8T-4123

324D, 322C SHOE SUPPORT GUARDS

CAM, CBY, LAR, C3R, JLS, JKR

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 192-8458
Guard Assembly 4 192-8459
Bolt (M 20) 32 8T-6430
Washer 32 8T-4123
Pipe 16 192-8460
Bolt (M 20) 16 7X-2440
Washer 32 8T-4123
Support Assembly (Nut) 16 226-5101

322CL SHOE SUPPORT GUARDS

BPH

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 198-5596
Guard Assembly 4 198-5597
Bolt (M 20) 32 8T-6430
Washer 32 8T-4123
Pipe 16 219-8238
Bolt (M 20) 16 222-3595
Washer 32 8T-4123
Nut 16 8T-4131

76
 Excavators/Front Shovels
325D, 325C, 325B, 325

325DL, 325DLN TRACK

SLIP FIT MASTER LINKS
LAL, NAC, JCL, GPB, T2S, PEH, PAL, AZP, DAP, SCR, MCL, PKE, C4F, LWR, RJK
8.00" (203.2 mm) PITCH -- 20 mm BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- 50 Section 2 236-8893
Components of Link Assembly
Track Links
RH Master 1 115-1853
LH Master 1 115-1854
RH Regular 49 6Y-1607
LH Regular 49 6Y-1608
Other Components
Pin 49 6Y-0851
Master Pin (Slip Fit) 1 188-3065
Bushing 49 201-0825
Master Bushing 1 201-0826
Seal (Poly-W) 98 179-3425
Seal-Master (Poly-W) 2 179-3427
Cotter 1 095-7944
1
Track Hardware
Bolt (Grouser Shoe) 200 6Y-0846
Bolt (Self-Cleaning Shoe) 100 6Y-5686
Bolt (Self-Cleaning Shoe) 100 6Y-0846
Nut 200 9W-3361
Special Group
Pin and Bushing Group (48 Sections) (Contains Press Fit Master Pin) 1 246-1907
1 Not part of link assembly; required to assemble track group.

77
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D, 325C/B TRACK

SLIP FIT MASTER LINKS
BKH, BKW, AMH, BLA 8GM, 8PR, KDG, CJM, ABD, DBH
8.00" (203.2 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 201-9116
Components of Link Assembly
Track Links
RH Master 1 115-1853 115-1853
LH Master 1 115-1854 115-1854
RH Regular 44 6Y-1607 6Y-1607
LH Regular 44 6Y-1608 6Y-1608
Other Components
Pin 44 6Y-0851 6Y-0851
Master Pin (Slip Fit) 1 188-3065 188-3065
Bushing 44 179-0695 201-0825
Master Bushing 1 179-0693 201-0826
Seal (Poly-W) 88 -- 179-3425
Seal-Master (Poly-W) 2 -- 179-3427
Seal (Spring Washer) 180 6Y-0852 --
Spacer 2 6Y-0847 --
Cotter 1 095-7944 095-7944
Track Hardware 2
Bolt (Grouser Shoe) 180 6Y-0846 6Y-0846
Bolt (Self-Cleaning Shoe) 90 6Y-5686 6Y-5686
Bolt (Self-Cleaning Shoe) 90 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group
Pin and Bushing Group (48 Sections) (Contains Press Fit Master Pin) 1 137-4124 246-1907
1 Upgrade to 201-9116.
2 Not part of link assembly; required to assemble track group.

78
 Excavators/Front Shovels
325D, 325C, 325B, 325

325CL, 325BL, 325BLN TRACK

SLIP FIT MASTER LINKS
BLX, G1L, S2C, CSJ, DTF, JLD, JLC, BKT, BMM, BTD, BFE, CRB, 1GS, 2JR, 4DS, 5BS, 6DN, 7EN, 8FN, 8RR,
5LW
8.00" (203.2 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 48 Section 2 -- 1 201-9117
Components of Link Assembly
Track Links
RH Master 1 115-1853 115-1853
LH Master 1 115-1854 115-1854
RH Regular 47 6Y-1607 6Y-1607
LH Regular 47 6Y-1608 6Y-1608
Other Components
Pin 47 6Y-0851 6Y-0851
Master Pin (Slip Fit) 1 188-3065 188-3065
Bushing 47 179-0695 201-0825
Master Bushing 1 179-0693 201-0826
Seal (Poly-W) 94 -- 179-3425
Seal-Master (Poly-W) 2 -- 179-3427
Seal (Spring Washer) 192 6Y-0852 --
Spacer 2 6Y-0847 --
Cotter 1 095-7944 095-7944
Track Hardware 2
Bolt (Grouser Shoe) 192 6Y-0846 6Y-0846
Bolt (Self-Cleaning Shoe) 96 6Y-5686 6Y-5686
Bolt (Self-Cleaning Shoe) 96 6Y-0846 6Y-0846
Nut 192 9W-3361 9W-3361
Special Group
Pin and Bushing Group (48 Sections) (Contains Press Fit Master Pin) 1 137-4124 246-1907
1 Upgrade to 201-9117.
2 Not part of link assembly; required to assemble track group.

79
 Excavators/Front Shovels
325D, 325C, 325B, 325

325 TRACK
PRESS FIT MASTER LINKS
5WK, 6RM, 7TG, 8JG, 8NL, 8YK, 9SG, 9ZR
8.00" (203.2 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 213-1933
Components of Link Assembly
Track Links
RH Regular 45 6Y-1607 6Y-1607
LH Regular 45 6Y-1608 6Y-1608
Other Components
Pin 44 6Y-0851 6Y-0851
Master Pin (Press Fit) 1 6Y-0850 6Y-0852
Bushing 44 179-0695 201-0825
Master Bushing 1 179-0693 201-0826
Seal (Poly-W) 88 -- 179-3425
Seal-Master (Poly-W) 2 -- 179-3427
Seal (Spring Washer) 180 6Y-0852 --
Spacer 2 6Y-0847 --
2
Track Hardware
Bolt (Grouser Shoe) 180 6Y-0846 6Y-0846
Bolt (Self-Cleaning Shoe) 90 6Y-5686 6Y-5686
Bolt (Self-Cleaning Shoe) 90 6Y-0846 6Y-0846
Nut 180 9W-3361 9W-3361
Special Group 2
Pin and Bushing Group (48 Sections) 1 137-4124 246-1907
1 Upgrade to 213-1933.
2 Not part of link assembly; required to assemble track group.

80
 Excavators/Front Shovels
325D, 325C, 325B, 325

325L, 325N, 325LN TRACK

PRESS FIT MASTER LINKS
2JK, 2SK, 2SL, 3LL, 6KK, 7CJ, 7LJ, 7LM, 8NK, 9KL
8.00" (203.2 mm) PITCH -- 20 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 48 Section 2 -- 1 213-1932
Components of Link Assembly
Track Links
RH Regular 48 6Y-1607 6Y-1607
LH Regular 48 6Y-1608 6Y-1608
Other Components
Pin 47 6Y-0851 6Y-0851
Master Pin (Press Fit) 1 6Y-0850 6Y-0850
Bushing 47 179-0695 201-0825
Master Bushing 1 179-0693 201-0826
Seal (Poly-W) 94 -- 179-3425
Seal-Master (Poly-W) 2 -- 179-3427
Seal (Spring Washer) 192 6Y-0852 --
Spacer 2 6Y-0847 --
2
Track Hardware
Bolt (Grouser Shoe) 192 6Y-0846 6Y-0846
Bolt (Self-Cleaning Shoe) 96 6Y-5686 6Y-5686
Bolt (Self-Cleaning Shoe) 96 6Y-0846 6Y-0846
Nut 192 9W-3361 9W-3361
Special Group 2
Pin and Bushing Group (48 Sections) 1 137-4124 246-1907
1 Upgrade to 213-1932.
2 Not part of link assembly; required to assemble track group.

81
 Excavators/Front Shovels
325D, 325C, 325B, 325

325DL TRACK HEAVY DUTY

C7K, C9M, C8L
8.00" (203.2 mm) PITCH - 3/4" BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- (51 Sections) 2 269-5215
Components of Link Assembly
Track Links
RH Pin End Master 1 8E-7407
LH Pin End Master 1 8E-7408
RH Bushing End Master 1 8E-7409
LH Bushing End Master 1 8E-7410
RH Regular 50 8E-7405
LH Regular 50 8E-7406
Other Components
Pin 51 198-1125
Bushing 51 8E-7222
Seal Assembly (Rigid) 102 207-0544
Thrust Ring 102 152-8071
1
Track Hardware
Bolt 200 6V-1792
Nut 200 1S-1860
Master Bolt 4 9S-1838
1 Not part of link assembly; required to assemble track group.

82
 Excavators/Front Shovels
325D, 325C, 325B, 325

325CL TRACK HEAVY DUTY

M2K, S3M, Y4P
8.00" (203.2 mm) PITCH - 3/4" BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- (49 Sections) 2 198-1001
Components of Link Assembly
Track Links
RH Pin End Master 1 8E-7407
LH Pin End Master 1 8E-7408
RH Bushing End Master 1 8E-7409
LH Bushing End Master 1 8E-7410
RH Regular 48 8E-7405
LH Regular 48 8E-7406
Other Components
Pin 49 198-1125
Bushing 49 8E-7222
Seal Assembly (Rigid) 98 207-0544
Thrust Ring 98 152-8071
1
Track Hardware
Bolt 192 6V-1792
Nut 192 1S-1860
Master Bolt 4 9S-1838
1 Not part of link assembly; required to assemble track group.

325D, 325C, 325B, 325 TRACK SHOES

8.00" (203.2 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 6I-9854
Extreme Service (Trapezoidal Opening, Clipped Grouser) 27.6" (700 mm) 1Q-4752
Double Grouser 23.6" (600 mm) 8E-8812
Double Grouser 27.6" (700 mm) 8E-8814
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 3Q-6993
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5064
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5065
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 6Y-2126
Triple Grouser (Center Punched Slots) 35.4" (900 mm) 6I-8651
Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0137
Triple Grouser (Heavy Duty, Center Punched Slots) 27.6" (700 mm) 121-0138
Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6305
Self-Cleaning 35.4" (900 mm) 6Y-5662

83
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D, 325C HEAVY DUTY TRACK SHOES

8.00" (203.2 mm)PITCH - 3/4" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Extreme Service (Trapezoidal Opening, Clipped Grouser) 24" (610 mm) 207-5897 207-5898
Extreme Service (Trapezoidal Opening, Clipped Grouser) 28" (710 mm) 207-5283 207-5284
Double Grouser 27.5" (700 mm) 209-4535 209-4536
Triple Grouser 27.5" (700 mm) 209-4539 209-4540

325D, 325C, 325B, 325 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 6Y-4898
Bolt 18 8T-6430
Washer 18 8T-3282

325D, 325C SPROCKETS HEAVY DUTY

M2K, S3M, Y4P, C7K, C9M, C8L

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Tooth) 1 200-4197
Bolt 18 8T-6430
Washer 18 8T-3282

325D, 325C, 325B IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 115-3696
Components of Group
Idler Assembly 1 115-7471
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Block 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

84
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D IDLERS
C4F, LWR, RJK

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 239-3690
Components of Group
Idler Assembly 1 235-8531
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Block 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

325 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 102-8155
Components of Group
Idler Assembly 1 115-7471
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Block 2 7I-7767
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

85
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D, 325C, 325B, 325 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6Y-5323
Components of Group
Roller Shell Assembly 1 6Y-9859
1
Bearing 1 6Y-9855
1
Bearing 1 6Y-9856
Shaft 1 6Y-9858
Retainer 1 6Y-8075
Thrust Washer 1 6Y-8076
Cover 1 6Y-8077
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 179-1292
Toric Ring 1 2 1M-3097
Seal -- Shaft O-Ring 1 5H-8848
Plug 1 7H-3171
2
Mounting Hardware
Bolt 1 8T-5878
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

325D CARRIER ROLLERS

LWR, C7K, MCL, C9M, C8L

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 4 247-0565
Components of Group
Roller Shell (SF) 1 6Y-1056
Shaft 1 247-0564
End Collar 2 158-8086
Retaining Ring 1 158-8096
Pin 1 159-9526
Seal -- Duo-Cone Group 2 9W-2201
1
Toric Ring 2 6H-1309
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 5G-2247
Plug 1 6Y-0473
2
Mounting Hardware
Bolt 4 7X-2565
Washer 4 8T-4123
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

86
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D, 325C, 325B, 325 TRACK ROLLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Single Flange (SF) -1 -- 2 247-0565
3
Double Flange (DF) - -- 247-0566
Components of Group
Roller Shell (SF) 1 6Y-1056 6Y-1056
Roller Shell (DF) 1 -- 5Q-3216
Bearing 4 2 6Y-1782 6Y-1782
Shaft 1 6Y-1053 247-0564
End Collar 2 6Y-1054 158-8086
Retaining Ring 1 6Y-6201 158-8096
Pin 1 9W-2204 159-9526
Seal -- Duo-Cone Group 2 9W-2201 9W-2201
4
Toric Ring 2 6H-1309 6H-1309
Seal -- Shaft O-Ring 2 8F-6711 8F-6711
Stopper 1 5G-2247 5G-2247
Plug 1 6Y-0473 6Y-0473
5
Mounting Hardware
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
1 325B, 325 machines use 14 single flange roller group. 325BL, 325L machines use 16 single flange roller groups. 325D, 325C (14) and 325DL,
325CL (18) machines use the following roller confrigurations. 14 Single flange roller groups used on : BKN, AMH, BKW, KDG, CJM. 18 Single
flange roller groups used on: CSJ, JLC, BKT, BMM, BTD, BFE, CRB, LAL, NAC, CYW, GPB, T2S, PAL, AZP, DAP, SCR, PKE. 8 Single flange
roller groups and 6 double flange roller groups are used on BLA. 10 Single flange roller groups and 8 double flange roller groups are used on BLX,
PEH.
2 Upgrade to 247-0565 Roller GP
3 Use as required.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

87
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D, 325C, 325B, 325 TRACK ROLLERS HEAVY DUTY

Standard on the M2K, S3M, Y4P, DTF, JLD, G1L, S2C, C4F, LWR, RJK, C7K, MCL, C9M, C8L (18 Required Single
Flange)
Optional use for other 325 machines

FORMER PART
(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) (Heavy Duty) -- 1 -- 2 206-1264
1 3
Double Flange (DF) (Heavy Duty) -- -- 206-1263
Components of Group
Roller Shell (SF) (Heavy Duty) 1 -- 4 206-9257
5
Roller Shell (DF) (Heavy Duty) 1 -- 206-1262
Bearing 2 -- 6Y-1782
Shaft 1 158-8089 206-9260
End Collar 2 158-8086 158-8086
Pin 2 159-9526 159-9526
Seal -- Duo-Cone Group 2 9W-2201 206-9212
Toric Ring 6 2 6H-1309 171-5713
Seal -- Shaft O-Ring 2 8F-6711 8F-6711
Plug 1 6Y-0473 9W-2146
Mounting Hardware 7
Bolt 4 7X-2565 7X-2565
Washer 4 8T-4123 8T-4123
Special Application Arctic Roller Group
Single Flange (SF) -1 -- 207-8167
Seal - Duo-Cone Group 2 -- 3P-1848
6
Toric Ring 2 -- 3P-1847
Seal 2 -- 8M-4390
1 Use as required.
2 Upgrade to 206-1264 Roller GP
3 Upgrade to 206-1263 Roller GP.
4 Order 1 206-9257 roller assembly and 1 9W-2146 plug.
5 Order 1 206-1262 roller assembly and 1 9W-2146 plug.
6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
7 These components are not included in the roller group; quantities shown are required to mount each roller.

325D, 325C, 325B, 325 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 7Y-2581
Bolt 8 7X-2563
Washer 8 8T-4123
Spacer 8 8V-1715

88
 Excavators/Front Shovels
325D, 325C, 325B, 325

325D, 325C TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 119-4554
Guard Assembly 4 119-4553
Bolt (M 20) 24 8T-5460
Washer 24 8T-5439
Pipe 12 117-5612
Bolt (M 20) 12 7X-2440
Washer 24 8T-5439
Support Assembly (Nut) 12 186-5564

325DL TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 235-7774
Guard Assembly 4 235-7775
Bolt (M 20) 32 8T-5460
Washer 32 8T-5439
Pipe 16 117-5612
Bolt (M 20) 16 7X-2440
Washer 32 8T-5439
Support Assembly (Nut) 16 186-5564

325CL TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 186-5499
Guard Assembly 4 186-5500
Bolt (M 20) 32 8T-5460
Washer 32 8T-5439
Pipe 16 117-5612
Bolt (M 20) 16 7X-2440
Washer 32 8T-5439
Support Assembly (Nut) 16 186-5564

89
Excavators/Front Shovels
325D, 325C, 325B, 325

325D TRACK ROLLER GUARDS (SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 119-4554
Guard Assembly 2 119-4553
Bolt (M 20) 12 8T-5460
Washer 12 8T-5439
Pipe 6 117-5612
Bolt (M 20) 6 7X-2440
Washer 12 8T-5439
Support Assembly (Nut) 6 186-5564

325DL TRACK ROLLER GUARDS (SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 235-7774
Guard Assembly 2 235-7775
Bolt (M 20) 16 8T-5460
Washer 16 8T-5439
Pipe 8 117-5612
Bolt (M 20) 8 7X-2440
Washer 16 8T-5439
Support Assembly (Nut) 8 186-5564

325D SHOE SUPPORT GUARDS

FOR MACHINE SERIAL NUMBERS C9M, C8L, C7K

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 264-1671
Guard Assembly 4 264-1672
Bolt (M 20) 32 8T-6430
Washer 32 8T-4123
Pipe 16 192-8460
Bolt (M 20) 16 7X-2440
Washer 32 8T-4123
Support Assembly (Nut) 16 273-6910

90
 Excavators/Front Shovels
325D, 325C, 325B, 325

325C SHOE SUPPORT GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 192-8458
Guard Assembly 4 192-8459
Bolt (M 20) 32 8T-6430
Washer 32 8T-4123
Pipe 16 192-8460
Bolt (M 20) 16 7X-2440
Washer 32 8T-4123
Support Assembly (Nut) 16 226-5101

325CL SHOE SUPPORT GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 260-2441
Guard Assembly 4 260-2442
Bolt (M 20) 32 8T-6430
Washer 32 8T-4123
Pipe 16 192-8460
Bolt (M 20) 16 7X-2440
Washer 32 8T-4123
Support Assembly (Nut) 16 8T-4131

91
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D, 330C/B TRACK

SLIP FIT MASTER LINKS
BTM, GAG, JAB, MCA, 4YW, 5EZ, 8SR, 9HN, KAB, PCK, MEY, EAH
8.50" (215.9 mm) PITCH -- 22 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 201-9118
Components of Link Assembly
Track Links
RH Master 1 118-7302 118-7302
LH Master 1 118-7303 118-7303
RH Regular 44 6Y-2589 6Y-2589
LH Regular 44 6Y-2590 6Y-2590
Other Components
Pin 44 6Y-2751 6Y-2751
Master Pin (Slip Fit) 1 188-3066 188-3066
Bushing 44 123-0025 201-0827
Master Bushing 1 123-0026 201-0828
Seal (Poly-W) 88 -- 179-3426
Seal-Master (Poly-W) 2 -- 179-3428
Seal (Spring Washer) 180 6Y-2750 --
Spacer 2 6Y-2749 --
Cotter 1 095-7944 095-7944
Track Hardware 2
Bolt 180 6Y-9024 6Y-9024
Bolt (Use with Heavy Duty Shoes) 180 143-4891 143-4891
Nut 180 9W-4381 9W-4381
Special Group
Pin and Bushing Group (49 Sections) (Contains Press Fit Master Pin) 1 137-4125 246-1908
1 Upgrade to 201-9118
2 Not part of link assembly; required to assemble track group.

92
 Excavators/Front Shovels
330D, 330C, 330B, 330

330DL, 330DLN, 330CL, 330BL, 330BLN TRACK

SLIP FIT MASTER LINKS
KDD, RBH, CYA, B3M, CGZ, JCD, JNK, HAA, GKX, DKY, CAP, 1JS, 2RR, 3YR, 4RS, 5LR, 5LS, 6DR, 8TR, 3ZZ,
FFK, GKX, EDX, HAS, B6H, MWP, T2Y, JLP, FFK, NBD, THJ, GBC, RAS, ERN, RDA, LDR, GGE, C5K, LEM, PEL,
LRM
8.50" (215.9 mm) PITCH -- 22 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 49 Section 2 -- 1 201-9119
Components of Link Assembly
Track Links
RH Master 1 118-7302 118-7302
LH Master 1 118-7303 118-7303
RH Regular 48 6Y-2589 6Y-2589
LH Regular 48 6Y-2590 6Y-2590
Other Components
Pin 48 6Y-2751 6Y-2751
Master Pin (Slip Fit) 1 188-3066 188-3066
Bushing 48 123-0025 201-0827
Master Bushing 1 123-0026 201-0828
Seal (Poly-W) 96 - 179-3426
Seal-Master (Poly-W) 2 - 179-3428
Seal (Spring Washer) 196 6Y-2750 -
Spacer 2 6Y-2749 -
Cotter 1 095-7944 095-7944
Track Hardware 2
Bolt 196 6Y-9024 6Y-9024
Bolt (Use with Heavy Duty Shoes) 196 143-4891 143-4891
Nut 196 9W-4381 9W-4381
Special Group
Pin and Bushing Group (49 Sections) (Contains Press Fit Master Pin) 1 137-4125 246-1908
1 Upgrade to 201-9119
2 Not part of link assembly; required to assemble track group.

330CL, 330BL, 330BLN MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES
SLIP FIT MASTER LINKS

QUANTITY PART NUMBER

Link Assembly Used 201-9119
Triple Grouser Shoe -- 33.5" (850 mm) 2 203-0859
Triple Grouser Shoe -- 33.5" (850 mm) (HD) 2 203-0862

93
 Excavators/Front Shovels
330D, 330C, 330B, 330

330 TRACK
PRESS FIT MASTER LINKS
2ZM, 6ZK, 8RL, 9NG, 9PJ, 9WJ
8.50" (215.9 mm) PITCH -- 22 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 45 Section 2 -- 1 213-1972
Components of Link Assembly
Track Links
RH Regular 45 6Y-2589 6Y-2589
LH Regular 45 6Y-2590 6Y-2590
Other Components
Pin 44 6Y-2751 6Y-2751
Master Pin (Press Fit) 1 6Y-2748 6Y-2748
Bushing 44 123-0025 201-0827
Master Bushing 1 123-0026 201-0828
Seal (Poly-W) 88 - 179-3426
Seal-Master (Poly-W) 2 - 179-3428
Seal (Spring Washer) 180 6Y-2750 -
Spacer 2 6Y-2749 -
2
Track Hardware
Bolt 180 6Y-9024 6Y-9024
Bolt (Use with Heavy Duty Shoes) 180 143-4891 143-4891
Nut 180 9W-4381 9W-4381
Special Group
Pin and Bushing Group (49 Sections) 1 137-4125 246-1908
1 Upgrade to 213-1972
2 Not part of link assembly; required to assemble track group.

94
 Excavators/Front Shovels
330D, 330C, 330B, 330

330L, 330LN TRACK

PRESS FIT MASTER LINKS
2EL, 5YM, 6SK, 6WJ, 8CK, 8FK, 9ML
8.50" (215.9 mm) PITCH -- 22 mm BOLT

SEALED GREASED
QUANTITY PART NUMBER PART NUMBER
Link Assembly -- 49 Section 2 -- 1 213-1971
Components of Link Assembly
Track Links
RH Regular 49 6Y-2589 6Y-2589
LH Regular 49 6Y-2590 6Y-2590
Other Components
Pin 48 6Y-2751 6Y-2751
Master Pin (Press Fit) 1 6Y-2748 6Y-2748
Bushing 48 123-0025 201-0827
Master Bushing 1 123-0026 201-0828
Seal (Poly W) 96 - 179-3426
Seal - Master (Poly W) 2 179-3428
Seal (Spring Washer) 196 6Y-2750 -
Spacer 2 6Y-2749 -
2
Track Hardware
Bolt 196 6Y-9024 6Y-9024
Bolt (Use with Heavy Duty Shoes) 196 143-4891 143-4891
Nut 196 9W-4381 9W-4381
Special Group
Pin and Bushing Group (49 Sections) 1 137-4125 246-1908
1 Upgrade to 213-1971
2 Not part of link assembly; required to assemble track group.

95
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D HEAVY DUTY TRACK

L2K, E4K, H3K
8.50" (215.9 mm) PITCH - 24mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 49 Section 2 252-0617 1
Track Links
RH Regular 49 209-6383
LH Regular 49 209-6384
Components of Link Assembly
Other Components
Pin 48 8E-4272
Master Pin 1 253-2740
Bushing 48 227-3029
Master Bushing 1 251-8368
Thrust Ring 96 3P-0623
Thrust Ring - Master 2 251-8364
Seal Assembly 96 250-3998
Seal Assembly - Master 2 251-7757
Stopper 1 7G-4332
Plug 1 6Y-0473
Track Hardware 2
Bolt 196 150-4741
Nut 196 150-4742
1 For 52 section link assembly order 252-0618.
2 Not part of link assembly; required to assemble track group

96
 Excavators/Front Shovels
330D, 330C, 330B, 330

330CL HEAVY DUTY TRACK

B2L, B4N, B1K
8.50" (215.9 mm) PITCH - 24 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 49 Section 2 150-4780
Track Links
RH Regular 49 209-6383
LH Regular 49 209-6384
Components of Link Assembly
Other Components
Pin 48 8E-4272
Master Pin 1 211-3295
Bushing 48 1M-3669
Master Bushing 1 1M-3670
Seal (Spring Washer) 196 8M-6239
Spacer 2 8M-6238
1
Track Hardware
Bolt 196 150-4741
Nut 196 150-4742
Special Group
Pin and Bushing Group (52 Section) 1 206-6004
1 Not part of link assembly; required to assemble track group

330D, 330C, 330B, 330 TRACK SHOES

8.50" (215.9 mm) PITCH -- 22 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Clipped Grouser, Trapezoidal Opening) 23.6" (600 mm) 6I-9893
Extreme Service (Clipped Grouser) 27.6" (700 mm) 1Q-4769
Double Grouser 23.6" (600 mm) 6I-8454
Double Grouser 27.6" (700 mm) 6I-8455
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 3Q-6992
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5066
Triple Grouser (Center Punched Slots) 27.6" (700mm) 238-8591
Triple Grouser (Center Punched Slots) 29.5" (750 mm) 126-5067
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 238-8592
Triple Grouser (Center Punched Slots) 33.5" (850 mm) 6Y-8180
Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0140
Triple Grouser (Heavy Duty, Center Punched Slots) 29.5" (750 mm) 121-0141
Triple Grouser (Heavy Duty, Center Punched Slots) 33.5" (850 mm) 139-0246
Self-Cleaning 33.5" (850 mm) 5Q-3252

97
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D, 330CL HEAVY DUTY TRACK SHOES

B2L, B4N, B1K, L2K, E4K, H3K
8.50" (215.9 mm) PITCH -- 24 mm BOLT

TYPE WIDTH PART NUMBER

Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 215-2991
Triple Grouser (Heavy Duty Center Punched Slots) 33.5" (850 mm) 215-2986

330D, 330C, 330B, 330 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 6Y-5685
Bolt 16 7X-2575

330D, 330CL HEAVY DUTY SPROCKETS

B2L, B4N, B1K, L2K, E4K, H3K

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 211-9843
Bolt 16 7X-2575

330D, 330C, 330B, 330 IDLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Idler Group 2 102-8152 1 136-2422
Components of Group
Idler Assembly (635 mm Tread Diameter) 1 136-3847 136-3847
Bearing 2 2 6Y-8023 6Y-8023
Shaft 1 6Y-8028 6Y-8028
Bearing Block 2 7Y-1248 115-3699
Pin 2 6Y-8029 6Y-8029
Seal -- Duo-Cone Group 2 109-0881 109-0881
Toric Ring 2 2 5P-9120 5P-9120
Seal -- Shaft O-Ring 2 1H-7339 1H-7339
Plug 1 7H-3171 7H-3171
1 Use on model 330 only.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

98
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D, 330CL HEAVY DUTY IDLERS

B2L, B4N, B1K, L2K, E4K, H3K

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 248-7151
Components of Group
Idler Assembly (635 mm Tread Diameter) 1 264-9821
1
Bearing 2 124-9979
Shaft 1 124-9978
Bearing Block 2 115-6370
Pin 2 094-3709
Seal -- Duo-Cone Group 2 109-0868
1
Toric Ring 2 6Y-8134
Shaft O-Ring 2 2H-3934
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

330D IDLERS
FOR MACHINE SERIAL NUMBERS C5K, LEM, PEL

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 239-3691
Components of Group
Idler Assembly (645 mm Tread Diameter) 1 235-8536
1
Bearing 2 6Y-8023
Shaft 1 6Y-8028
Bearing Block 2 115-3699
Pin 2 6Y-8029
Seal -- Duo-Cone Group 2 109-0881
Toric Ring 1 2 5P-9120
Seal -- Shaft O-Ring 2 1H-7339
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

99
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D, 330C, 330B, 330 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6Y-5323
Components of Group
Roller Shell Assembly 1 6Y-9859
1
.Bearing 1 6Y-9855
1
Bearing 1 6Y-9856
Shaft 1 6Y-9858
Retainer 1 6Y-8075
Thrust Washer 1 6Y-8076
Cover 1 6Y-8077
Bolt 5 8T-1159
Seal -- Duo-Cone Group 2 179-1292
Toric Ring 1 2 1M-3097
Seal -- Shaft O-Ring 1 5H-8848
Plug 1 7H-3171
2
Mounting Hardware
Bolt 1 7X-2577
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

330D CARRIER ROLLERS

FOR MACHINE SERIAL NUMBERS PEL, L2K, E4K, H3K, ERN, THJ

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 4 179-1486
Components of Group
Roller Shell (SF) 1 179-1488
Shaft 1 183-2883
End Collar 2 179-1497
Pin 2 179-1499
Seal -- Duo-Cone Group 2 148-3533
Toric Ring 1 2 160-6631
Seal -- Shaft O-Ring 2 8F-8882
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 7X-2454
Washer 4 8T-4167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

100
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D, 330C, 330B, 330 TRACK ROLLERS

EARLY PART FORMER PART

(PER MACHINE) QUANTITY NUMBER NUMBER PART NUMBER
Single Flange (SF) -1 -- 2 -- 2 179-1486
3 4 4
Double Flange (DF) - -- -- 179-1491
Components of Group
Roller Shell (SF) 1 6Y-2794 6Y-2794 179-1488
Roller Shell (DF) 1 -- 5Q-3217 179-1492
Bearing 5 2 6Y-2792 6Y-2792 6Y-2792
Shaft 1 6Y-2790 158-8090 183-2883
End Collar 2 6Y-2791 158-8087 179-1497
Retaining Ring 1 6Y-8852 158-8097 --
Pin 2 -- -- 179-1499
Pin 1 9W-2212 159-9527 --
Seal -- Duo-Cone Group 2 148-3533 148-3533 148-3533
5
Toric Ring 2 160-6631 160-6631 160-6631
Seal -- Shaft O-Ring 2 8F-8882 8F-8882 8F-8882
Plug 1 -- -- 9W-2146
Stopper 1 5G-2247 5G-2247 --
Plug 1 6Y-0473 6Y-0473 --
6
Mounting Hardware
Bolt 4 7X-2454 7X-2454 7X-2454
Washer 4 8T-4167 8T-4167 8T-4167
1 330B, 330 machines use 14 single flange roller groups. 330BL, 330L machines use 16 single flange roller groups. 330D, 330C and 330DL,
330CL machines use the following roller configurations. 14 single flange roller groups used on : GAG, JAB, MCA, KAB, MEY. 18 Single flange
roller groups used on: KDD, CYA, CGZ, JNK, HAA, GKX, DKY, CAP, GBC, RAS, LDR, LRM, GGE, EDX, HAS, B6H, T2Y, JLP, NBD. 8 Single
flange roller groups and 6 double flange roller groups used on BTM, PCK. 10 Single flange roller groups and 8 double flange roller groups used on
RBH, RDA.
2 Upgrade to 179-1486 roller group.
3 Use as required.
4 Upgrade to 179-1491 roller group.
5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
6 These components are not included in the roller group; quantities shown are required to mount each roller.

101
 Excavators/Front Shovels
330D, 330C, 330B, 330

330D, 330C, 330B, 330 TRACK ROLLERS HEAVY DUTY

Standard on the B3M, JCD, ERN, MWP, THJ, C5K, LEM, PEL (18 Required Single Flange)
B2L, B4N, B1K, L2K, E4K, H3K (Use 345 Single Flange Roller Group 18 Required)
Optional use for other 330 machines

EARLY PART FORMER PART

(PER MACHINE) QUANTITY NUMBER NUMBER PART NUMBER
Single Flange (SF) (Heavy Duty) -1 -- 2 -- 2 183-2874
1 3 3
Double Flange (DF) (Heavy Duty) - -- -- 183-2879
Components of Group
Roller Shell (SF) (Heavy Duty) 1 152-4140 152-4140 183-2875
Roller Shell (DF) (Heavy Duty) 1 -- 165-0069 183-2880
Bearing 4 2 6Y-2792 6Y-2792 6Y-2792
Shaft 1 6Y-2790 158-8090 183-2883
End Collar 2 6Y-2791 158-8087 179-1497
Pin 2 -- -- 179-1499
Retaining Ring 1 6Y-8852 158-8097 --
Pin 1 9W-2212 159-9527 --
Seal -- Duo-Cone Group 2 148-3533 148-3533 148-3533
4
Toric Ring 2 160-6631 160-6631 160-6631
Seal -- Shaft O-Ring 2 8F-8882 8F-8882 8F-8882
Plug 1 -- -- 9W-2146
Stopper 1 5G-2247 5G-2247 --
Plug 1 6Y-0473 6Y-0473 --
5
Mounting Hardware
Bolt 4 7X-2454 7X-2454 7X-2454
Washer 4 8T-4167 8T-4167 8T-4167
1 Use as required.
2 Upgrade to 183-2874 roller group.
3 Upgrade to 183-2879 roller group.
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

330D, 330C CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 192-8303
Bolt 8 8T-5379
Washer 8 8T-4167

330B CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 133-2504
Bolt 8 8T-5379
Washer 8 8T-4167

102
 Excavators/Front Shovels
330D, 330C, 330B, 330

330 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 4I-6514
Bolt 8 8T-5379
Washer 8 8T-4167

330D, 330C TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 201-2775
Guard Assembly 4 201-2776
Bolt (M 24) 24 8T-5379
Washer 24 8T-4167
Pipe 12 192-8358
Bolt (M 24) 12 140-3048
Washer 24 8T-4167
Support Assembly (Nut) 12 105-6324

330DL, 330CL TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 189-3861
Guard Assembly 4 189-3862
Bolt (M 24) 32 8T-5379
Washer 32 8T-4167
Pipe 16 192-8358
Bolt (M 24) 16 140-3048
Washer 32 8T-4167
Support Assembly (Nut) 16 105-6324

330D TRACK ROLLER GUARDS (SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 201-2775
Guard Assembly 2 201-2776
Bolt (M 24) 12 8T-5379
Washer 12 8T-4167
Pipe 6 192-8358
Bolt (M 24) 6 140-3048
Washer 12 8T-4167
Support Assembly (Nut) 6 105-6324

103
Excavators/Front Shovels
330D, 330C, 330B, 330

330DL TRACK ROLLER GUARDS (SPROCKET)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 189-3861
Guard Assembly 2 189-3862
Bolt (M 24) 16 8T-5379
Washer 16 8T-4167
Pipe 8 192-8358
Bolt (M 24) 8 140-3048
Washer 16 8T-4167
Support Assembly (Nut) 8 105-6324

330CL SHOE SUPPORT GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 219-8212
Guard Assembly 4 219-8227
Bolt (M 24) 32 8T-5379
Washer 32 8T-4167
Pipe 16 192-8358
Bolt (M 24) 16 140-3048
Washer 16 8T-4167
Support Assembly (Nut) 16 226-5103

330D, 330CL SHOE SUPPORT GUARDS (HEAVY DUTY TRACK)

L2K, E4K, H3K

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 218-5405
Guard Assembly 4 218-5404
Bolt (M 24) 32 7X-2575
Washer 32 8T-4167
Pipe 16 218-5439
Bolt (M 24) 16 132-5794
Washer 16 8T-4167
Support Assembly (Nut) 16 226-5103

104
 Excavators/Front Shovels
345C, 345B

345C, 345CL, 345B, 345BL TRACK

GREASE LUBRICATED
345C, 345B (49 SECTION): MDC, JAR, BWY, 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN
345CL, 345BL (52 SECTION): RFN, GBH, PJW, DHP, SRY, TDG, GJR, LYS, CPX, ESD, TBA, WDE, M2R, D3S,
AYF, TAJ, BZN, ELS, CWG, GCL, KBA, GPH, 2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW, 9GS166-UP
8.50" (215.9 mm) PITCH - 24 mm BOLT

PART NUMBER 49 SECTION 52 SECTION

Link Assembly (Quantity 2) 252-0617 252-0618
Components of Link Assembly
Track Links
RH Regular 209-6383 49 52
LH Regular 209-6384 49 52
Other Components
Pin 8E-4272 48 51
Master Pin 253-2740 1 1
Bushing 227-3029 48 51
Master Bushing 251-8368 1 1 1
Seal Assembly (Rigid) 250-3998 96 102
Seal Assembly - Master (Rigid) 251-7757 2 2
Thrust Ring 3P-0623 96 102
Thrust Ring - Master 251-8364 2 2
Stopper 7G-4332 1 1
Plug 6Y-0473 1 1
Track Hardware 2
Bolt 150-4741 196 204
Nut 150-4742 196 204
Special Group
Pin and Bushing Group (52 Sections) 299-1689 1 1
1 Former master bushing 233-1634, serviced replaced by: (1) 251-8386 master bushing, (2) 251-7757 master seal assembly, (2) 251-8364 master
thrust ring.
2 Not part of Link Assembly; required to assemble track group.

105
 Excavators/Front Shovels
345C, 345B

345B, 345BL TRACK

345B (49 SECTION): 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN
345BL (52 SECTION):2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW, 9GS166-UP
8.50" (215.9 mm) PITCH -- 24 mm BOLT

PART NUMBER 49 SECTION 52 SECTION

1
Link Assembly -- (Quantity 2) -- -- 2
Track Links
RH Regular 209-6383 49 52
LH Regular 209-6384 49 52
Components of Link Assembly
Other Components
Pin 8E-4272 48 51
Master Pin 211-3295 1 1
Bushing 1M-3669 48 51
Master Bushing 1M-3670 1 1
Seal (Spring Washer) 8M-6239 196 208
Spacer 8M-6238 2 2
Track Hardware 3
Bolt 150-4741 196 208
Nut 150-4742 196 208
Special Group
Pin and Bushing Group (52 Section) 206-6004 1 1
1 Upgrade to 252-0617 link assembly.
2 Upgrade to 252-0618 link assembly.
3 Not part of link assembly; required to assemble track group

106
 Excavators/Front Shovels
345C, 345B

345CL, 345BL TRACK

POSITIVE PIN RETENTION 2 (PPR2) GREASE LUBRICATED
8.50" (215.9 mm) PITCH - 24 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 52 Section 2 257-2510
Components of Link Assembly
Track Links
RH Regular 52 255-2365
LH Regular 52 255-2364
Other Components
Pin 51 252-4429
Master Pin 1 257-3604
Bushing 51 227-3029
Master Bushing 1 251-8368
Seal Assembly 102 250-3998
Seal Assembly- Master 2 251-7757
Thrust Ring 102 3P-0623
Thrust Ring - Master 2 251-8364
Track Hardware 1
Bolt 208 150-4741
Nut 208 150-4742
1 Not part of link assembly; required to assemble track group

107
 Excavators/Front Shovels
345C, 345B

345BL TRACK
2SW1-98, 4SS1-356, 7KS1-199, 9GS1-165
8.50" (215.9 mm) PITCH -- 22 mm BOLT

QUANTITY PART NUMBER

Link Assembly -- 52 Section 2 -- 1
Components of Link Assembly
Track Links
RH Regular 52 130-5333
LH Regular 52 130-5334
Other Components
Pin 51 8E-4272
Master Pin 1 211-3295
Bushing 51 1M-3669
Master Bushing 1 1M-3670
Seal (Spring Washer) 208 8M-6239
Spacer 2 8M-6238
2
Track Hardware
Bolt 208 6Y-9024
Nut 208 9W-4381
Special Group
Pin and Bushing Group (52 Section) 1 206-6004
1 Now being serviced by link assembly 252-0618 using 24 mm hardware. Rework to current shoe requires 24 mm hardware, or order new shoes
with 24 mm bolt holes. If bolt loosening is not a problem, use 235 track chain 8E-8644, and remove one section. This chain can be used with 22
mm hardware.
2 Not part of link assembly; required to assemble track group

345C, 345B TRACK SHOES

8.50" (215.9 mm) PITCH -- 24 mm BOLT

TYPE WIDTH PLATE THICKNESS PART NUMBER

Extreme Service (Clipped Grouser) 29.5" (750 mm) -- 155-7420
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) -- 150-4768
Double Grouser (Trapezoidal Opening) 29.5" (750 mm) -- 150-4769
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 14.0 mm 150-4764
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 15.5 mm 150-4770
Triple Grouser (Center Punched Slots) 29.5" (750 mm) 15.5 mm 150-4766
Triple Grouser (Center Punched Slots) 35.4" (900 mm) 15.5 mm 150-4767

108
 Excavators/Front Shovels
345C, 345B

345B TRACK SHOES

8.50" (215.9 mm) PITCH -- 22 mm BOLT

TYPE WIDTH PART NUMBER

Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 136-3056
Double Grouser (Trapezoidal Opening) 29.5" (750 mm) 136-3057
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 133-3776
Triple Grouser (Center Punched Slots) 29.5" (750 mm) 133-3843
Triple Grouser (Center Punched Slots) 35.4" (900 mm) 130-6606

345C, 345B SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (23 Teeth) 1 124-3296
Bolt 20 7X-2575

345C, 345B IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 248-7151
Components of Group
Idler Assembly 1 264-9821
1
Bearing 2 124-9979
Shaft 1 124-9978
Bearing Block 2 115-6370
Pin 2 094-3709
Seal -- Duo-Cone Group 2 109-0868
Toric Ring 1 2 6Y-8134
Shaft O-Ring 2 2H-3934
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

109
 Excavators/Front Shovels
345C, 345B

345C, 345B CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

1
Group - 124-7280
Components of Group
Roller Assembly 1 124-7278
2
Bearing 1 6Y-8171
Bearing 1 6Y-8172
Shaft 1 124-7276
Retainer 1 6Y-9339
Thrust Washer 1 6Y-8176
Cover 1 6Y-8177
Bolt 5 8T-8441
Seal -- Duo-Cone Group 1 9W-2201
Toric Ring 2 2 6H-1309
Plug 1 7H-3171
Mounting Hardware 3
Bolt 1 7X-2583
1 Quantities per machine configuration vary. Check machine for quantity required.
2 Component of preceding assembly or group
3 Not included in roller group; quantity shown is required to mount each roller

345C, 345B TRACK ROLLERS

CURRENT MODEL

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 1 178-7293
2
Double Flange (DF) - 179-2395
Components of Group
Roller Shell (SF) 1 178-7294
Roller Shell (DF) 1 179-2396
3
Bearing 2 123-1382
Shaft 1 178-7297
End Collar 2 178-7296
Dowel 2 179-4182
Seal -- Duo-Cone Group 2 176-5331
3
Toric Ring 2 176-5333
Seal -- Shaft O-Ring 2 175-7897
Plug 1 9W-2146
4
Mounting Hardware
Bolt 4 8T-0363
Washer 4 8T-4167
1 18 rollers required with long undercarriage.
2 Use as required.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

110
 Excavators/Front Shovels
345C, 345B

345B TRACK ROLLERS

FORMER MODEL

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 -- 2
Double Flange (DF) -3 -- 4
Components of Group
Roller Shell (SF) 1 -- 5
Roller Shell (DF) 1 -- 6
7
Bearing 2 123-1382
Shaft 1 158-7913
End Collar 2 158-7908
Retaining Ring 2 158-8098
Pin 1 159-0049
Seal -- Duo-Cone Group 2 176-5331
7
Toric Ring 2 176-5333
Shaft O-Ring 2 175-7897
Stopper 1 5G-2247
Plug 1 6Y-0473
8
Mounting Hardware
Bolt 4 8T-0363
Washer 4 8T-4167
1 18 rollers required with long undercarriage.
2 Upgrade to 178-7293 roller group.
3 Use as required.
4 Upgrade to 179-2395 roller group.
5 Roller Shell canceled and replaced by: 1 - Roller Shell - 178-7294, 1 - Plug - 9W-2146.
6 Roller Shell canceled and replaced by: 1 - Roller Shell - 179-2396, 1 - Plug - 9W-2146.
7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
8 These components are not included in the roller group; quantities shown are required to mount each roller.

345C, 345CL, 345B, 345BL CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly (Fixed Gauge) 2 153-1624
Bolt 16 7X-2576
Spacer 16 7Y-0336
Guard Assembly (Variable Gauge) 2 157-1606
Bolt 8 7X-2575
Washer 8 8T-4167

111
Excavators/Front Shovels
345C, 345B

345C TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 248-1967
Pipe 14 130-4499
Bolt 14 140-3048
Washer 28 8T-4167
Support Assembly 14 105-6324
Bolt 28 7X-2576
Spacer 28 7Y-0336

345CL TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 251-2473
Guard Assembly 4 251-2474
Pipe 16 130-4499
Bolt 16 140-3048
Washer 32 8T-4167
Support Assembly 14 105-6324
Bolt 32 7X-2576
Spacer 32 7Y-0336

112
 Excavators/Front Shovels
350

350, 350L TRACK

350 (47 SECTION): 2ZL, 7RK, 8HK
350L (51 SECTION): 3ML, 9DK, 9FL
9.00" (228.6 mm) PITCH -- 22 mm BOLT

PART NUMBER 47 SECTION 51 SECTION

Link Assembly -- (Quantity 2) 8E-6089 8E-6090
Components of Link Assembly
Track Links
RH Regular 8E-6091 47 51
LH Regular 8E-6092 47 51
Other Components
Pin 1M-1455 46 50
Master Pin 8E-6094 1 1
Bushing 8E-6095 46 50
Master Bushing 8E-6096 1 1
Seal (Spring Washer) 8M-2620 188 204
Spacer 8M-2621 2 2
Track Hardware 1
Bolt 143-4891 188 204
Bolt 2 6Y-9024 188 204
Nut 9W-4381 188 204
Special Group
Pin and Bushing Group (51 Section) 206-6049 1 1
1 Not part of link assembly; required to assemble track group.
2 Shorter bolt for use with 600 mm triple grouser shoe, with plate thickness 14.0 mm.

350 TRACK SHOES

9.00" (228.6 mm) PITCH -- 22 mm BOLT

TYPE WIDTH PLATE THICKNESS PART NUMBER

Extreme Service (Trap, Clip Grouser) 27.6" (700 mm) -- 108-4605
Double Grouser (Trap) 23.6" (600 mm) -- 166-4927
Double Grouser (Trap, Clip Grouser) 23.6" (600 mm) -- 166-4928
Double Grouser (Trap) 29.5" (750 mm) -- 166-4929
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 14.0 mm 8E-6097
Triple Grouser (Center Punched Slots) 23.6" (600 mm) 15.5 mm 145-9320
Triple Grouser (Center Punched Slots) 29.5" (750 mm) 15.5 mm 8E-6098
Triple Grouser (Center Punched Slots) 33.5" (850 mm) 15.5 mm 1Q-4774
Triple Grouser (Center Punched Slots) 35.4" (900 mm) 15.5 mm 8E-6099

113
 Excavators/Front Shovels
350

350 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (23 Teeth) 1 8E-6974
Bolt 23 7X-2575

350 IDLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Idler Group 2 -- 1 135-8903
Components of Group
Idler Assembly 1 138-8389 138-8389
2
Bearing 2 8E-4343 8E-4343
Shaft 1 8E-4335 8E-4335
Bearing Block 2 7Y-1871 135-8920
Pin 2 094-3709 094-3709
Seal -- Duo-Cone Group 2 109-0868 109-0868
Toric Ring 2 2 6Y-8134 6Y-8134
Seal -- Shaft O-Ring 2 2H-3934 2H-3934
Plug 1 7H-3171 7H-3171
1 Upgrade to 135-8903 Idler Gp.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

350 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 8E-4623
Components of Group
Roller Shell Assembly 1 8E-4622
1
Bearing 1 6Y-8171
Bearing 1 1 6Y-8172
Shaft 1 8E-4621
Retainer 1 6Y-9339
Thrust Washer 1 6Y-8176
Cover 1 6Y-8177
Bolt 5 8T-8441
Seal -- Duo-Cone Group 2 9W-2201
Toric Ring 1 2 096-4255
Cover 1 4H-9105
Plug 1 7H-3171
2
Mounting Hardware
Bolt 1 7X-2584
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

114
 Excavators/Front Shovels
350

350 TRACK ROLLERS

EARLY PART FORMER PART

(PER MACHINE) QUANTITY NUMBER NUMBER PART NUMBER
Single Flange (SF) 16 -- 1 -- 1 189-0475
2 3 3
Double Flange (DF) - -- -- 189-0794
Components of Group
Roller Shell (SF) 1 152-4142 152-4142 189-0479
Roller Shell (DF) 1 152-4147 152-4147 189-0795
Bearing 4 2 8E-4284 8E-4284 8E-4284
Shaft 1 8E-4285 158-7915 189-0476
End Collar 2 8E-4283 158-7908 178-7296
Retaining Ring 1 8E-4282 158-8098 --
Pin 2 -- -- 179-4182
Pin 1 8E-4281 159-0049 --
Seal -- Duo-Cone Group 2 109-0881 176-5331 176-5331
4
Toric Ring 2 5P-9120 176-5333 176-5333
Seal -- Shaft O-Ring 2 1H-7339 1H-7339 1H-7339
Plug 1 -- -- 9W-2146
Stopper 1 5G-2247 5G-2247 --
Plug 1 6Y-0473 6Y-0473 --
5
Mounting Hardware
Bolt 4 8T-0363 8T-0363 8T-0363
Washer 4 8T-4167 8T-4167 8T-4167
1 Upgrade to 189-0475 Roller GP
2 Use as required.
3 Upgrade to 189-0794 Roller GP
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

350 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 4I-4906
Bolt 8 7X-2575
Washer 8 8T-4167

115
 Excavators/Front Shovels
365CL, 365BL

365CL, 365BL, GREASE TRACK

MEM, MCS, FEN, ELC, MCY, 4XZ, 9PZ, 9TZ, AGD
10.25" (260.4 mm) PITCH -- 27 mm BOLT

GREASED
QUANTITY PART NUMBER
Link Assembly -- 47 Section 2 246-0504
Components of Link Assembly
Track Links
RH Regular 47 142-1803
LH Regular 47 142-1804
Other Components
Pin 46 2M-5652
Master Pin 1 253-2741
Bushing 46 245-3805
Master Bushing 1 245-3806
Seal Assembly 92 248-1537
Seal Assembly - Master 2 244-8697
Thrust Ring 92 2P-9419
Thrust Ring - Master 2 245-3808
Stopper 1 7G-4332
Plug 1 6Y-0473
Track Hardware 1
Bolt 188 144-0805
Nut 188 144-0806
Special Group
Pin and Bushing Group 1 299-1690
1 Not part of the link assembly; required to assemble track group.

116
 Excavators/Front Shovels
365CL, 365BL

365BL TRACK
4XZ, 9PZ, 9TZ, AGD
10.25" (260.4 mm) PITCH -- 27 mm BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 47 Section 2 142-1806 1
Components of Link Assembly
Track Links
RH Regular 47 142-1803
LH Regular 47 142-1804
Other Components
Pin 46 2M-5652
Master Pin 1 8M-6910
Bushing 46 8E-1886
Master Bushing 1 8E-1887
Seal 188 1S-4446
Spacer 2 1S-4445
2
Track Hardware
Bolt 188 144-0805
Nut 188 144-0806
Special Group
Pin and Bushing Group (51 Section) 1 206-6050
1 Service replaced by link assembly 246-0504.
2 Not part of link assembly; required to assemble track group.

365CL, 365BL TRACK SHOES

(PER MACHINE) WIDTH PLATE THICKNESS PART NUMBER

Double Grouser (Trapezoidal opening) 25.6" (650 mm) 20.5 mm 144-8598
Double Grouser (Center Punched) 29.5" (750 mm) 19.0 mm 144-8602
Double Grouser (Trapezoidal Opening) 29.5" (750 mm) 20.5 mm 166-4932
Double Grouser (Trapezoidal Opening) 35.4" (900 mm) 20.5 mm 166-4933

365CL, 365BL SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (21 tooth) 1 141-9655
Bolt 21 145-2970
Washer 21 9X-8399

117
 Excavators/Front Shovels
365CL, 365BL

365CL, 365BL IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 136-2429
Components of Group
Idler Assembly 1 141-2697
1
Bearing 2 6Y-7599
Shaft 1 6Y-7602
Bearing Block 2 136-2446
Pin 2 6Y-7603
Seal -- Duo-Cone Group 2 109-0861
Toric Ring 1 2 6Y-7592
Seal -- Shaft O-Ring 2 2H-3928
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

365CL, 365BL CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 242-4066
Components of Group
Roller Shell Assembly 1 242-4067
1
Bearing 1 6Y-8171
Bearing 1 6Y-8172
Shaft Assembly 1 242-4070
Retainer 1 6Y-9339
Thrust Washer 1 6Y-8176
Cover 1 6Y-8177
Bolt 5 8T-8441
Seal -- Duo-Cone Group 1 171-5811
1
Toric Ring 2 171-5713
Plug 1 7H-3171
2
Mounting Hardware
Bolt 1 7X-2584
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

118
 Excavators/Front Shovels
365CL, 365BL

365CL, 365BL TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 178-7288
1
Double Flange (DF) - 179-2348
Components of Group
Roller Shell (SF) 1 178-7289
Roller Shell (DF) 1 179-2393
Bearing 2 2 145-2295
Shaft 1 178-7292
End Collar 2 178-7291
Dowel 2 178-7540
Seal -- Duo-Cone Group 2 176-5332
Toric Ring 2 2 176-5334
Seal -- Shaft O-Ring 2 175-7900
Plug 1 9W-2146
Mounting Hardware 3
Bolt 4 107-3953
Washer 4 9X-8258
1 Use as required.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

365CL, 365BL CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 148-3095
Bolt 8 8C-8723
Spacer 8 148-3111

119
 Excavators/Front Shovels
375, 5080

375, 375L, 5080 TRACK

375, 5080 (47 SECTION): 6NK, 8WJ, 8XG, 6XK, 8SL
375L (51 SECTION): 1JM, 6RL, 9WL
10.25" (260.4 mm) PITCH -- 27 mm BOLT

SEALED PART
NUMBER 47 SECTION 51 SECTION
Link Assembly (Quantity 2) 6Y-7453 107-0669
Components of Link Assembly
Track Links
RH Regular 6Y-6721 47 51
LH Regular 6Y-6722 47 51
Other Components
Pin 2M-5652 46 50
Master Pin 8M-6910 1 1
Bushing 8E-1886 46 50
Master Bushing 8E-1887 1 1
Seal (Spring Washer) 1S-4446 188 204
Spacer 1S-4445 2 2
Track Hardware 1
Bolt 6Y-7432 188 204
Nut 6Y-7433 188 204
Special Group
Pin and Bushing Group (51 Section) 206-6050 1 1
1 Not part of link assembly; required to assemble track group.

375, 5080 TRACK SHOES

10.25" (260.4 mm) PITCH -- 27 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service 24.0" (610 mm) 6Y-7610
Double Grouser (Trapezoidal Opening) 24.0" (610 mm) 166-4931
Double Grouser (Trapezoidal Opening, Clip Grouser) 24.0" (610 mm) 166-4930
Double Grouser (Trapezoidal Opening) 29.5" (750 mm) 166-4932
1
Double Grouser (Trapezoidal Opening) 35.4" (900 mm) 166-4933
1 Use only on 375.

375, 5080 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (23 Teeth) 1 8E-4686
Bolt 23 7Y-1810
Washer 23 9X-8399

120
 Excavators/Front Shovels
375, 5080

375, 5080 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 135-8904
Components of Group
Idler Assembly 1 138-8388
1
Bearing 2 6Y-7599
Shaft 1 6Y-7602
Bearing Block 2 115-6359
Pin 2 6Y-7603
Seal -- Duo-Cone Group 2 109-0861
Seal -- Shaft O-Ring 2 2H-3928
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown per assembly or group.

375, 5080 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 242-4066
Components of Group
Roller Shell Assembly 1 242-4067
1
Bearing 1 6Y-8171
1
Bearing 1 6Y-8172
Shaft Assembly 1 242-4070
Retainer 1 6Y-9339
Thrust Washer 1 6Y-8176
Cover 1 6Y-8177
Bolt 5 8T-8441
Seal -- Duo-Cone Group 2 171-5811
Toric Ring 1 2 171-5713
Seal -- Cover 1 4H-9105
Plug 1 7H-3171
2
Mounting Hardware
Bolt 1 7X-2584
1 Component of preceding assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

121
 Excavators/Front Shovels
375, 5080

375, 5080 TRACK ROLLERS

EARLY PART FORMER PART

(PER MACHINE) QUANTITY NUMBER NUMBER PART NUMBER
1 1
Single Flange (SF) 16 185-5065
2 3 3
Double Flange (DF) - 185-5102
Components of Group
Roller Shell (SF) 1 152-4144 152-4144 185-5093
Roller Shell (DF) 1 152-4149 152-4149 185-5106
Bearing 4 2 6Y-8127 6Y-8127 6Y-8127
Shaft 1 6Y-8129 158-7918 178-7292
End Collar 2 6Y-8128 158-7910 178-7291
Retaining Ring 1 6Y-8130 158-8099 --
Pin 2 -- -- 178-7540
Pin 1 6Y-8131 159-0050 --
Seal -- Duo-Cone Group 2 176-5332 176-5332 176-5332
4
Toric Ring 2 176-5334 176-5334 176-5334
Seal -- Shaft O-Ring 2 175-7900 175-7900 175-7900
Plug 1 -- -- 9W-2146
Stopper 1 5G-2247 5G-2247 --
Plug 1 6Y-0473 6Y-0473 --
5
Mounting Hardware
Bolt 4 107-3953 107-3953 107-3953
Washer 4 9X-8258 9X-8258 9X-8258
1 Upgrade to 185-5065 Roller Group
2 Use as required.
3 Upgrade to 185-5102 Roller GP
4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

375 CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 7Y-8973
Bolt 8 7Y-5232
Washer 8 9X-8528

122
 Excavators/Front Shovels
375, 5080

5080 TRACK ROLLER GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 123-5540 1
Guard Assembly 2 123-5541 1
Guard Assembly 2 123-5554 2
Guard Assembly 2 123-5555 2
Pipe 14 7Y-2914
Bolt 14 105-6203
Support Assembly 4 101-2160
Support Assembly 10 101-2162
Bolt 28 7Y-5232
Washer 56 9X-8258
1 These 2 guard assemblies replaced 101-2164.
2 These 2 guard assemblies replaced 101-2165.

123
 Excavators/Front Shovels
385C, 385B, 5090

385C, 385CL, 385C FS, 385B, 385BL 5090B GREASE TRACK

385C, 385C FS, 385B, 5090B (47 Section): KBC, MNZ, JCM, BKF, BKX, CLS, T2F, KKK, GLT, MMA, EAM, CLD
385CL, 385BL (51 Sections): T2E, EDA, SBE, KGB, ANS, BLY, FDL
10.25" (260.4 mm) PITCH - 30 mm BOLT

PART NUMBER 47 SECTION 51 SECTION

Link Assembly -- (Quantity 2) 246-0505 246-0506
Components of Link Assembly
Track Links
RH Regular 174-0217 47 51
LH Regular 174-0218 47 51
Other Components
Pin 174-0219 46 50
Master Pin 253-2742 1 1
Bushing 245-3805 46 50
Master Bushing 245-3806 1 1
Seal Assembly 248-1537 92 100
Seal Assembly - Master 244-8697 2 2
Thrust Ring 2P-9419 92 100
Thrust Ring - Master 245-3808 2 2
Stopper 7G-4332 1 1
Plug 6Y-0473 1 1
1
Track Hardware
Bolt 174-0221 188 204
Nut 174-0222 188 204
1 Not part of the link assembly; required to assemble track group.

124
 Excavators/Front Shovels
385C, 385B, 5090

385B, 385BL, 5090B TRACK

385B, 5090B (47 Section): BKF, BKX, CLS, CLD
385BL (51 Sections): ANS, BLY, FDL
10.25" (260.4 mm) PITCH - 30 mm BOLT

PART NUMBER 47 SECTION 51 SECTION

Link Assembly (Quantity 2) 174-0215 174-0216
Components of Link Assembly
Track Links
RH Regular 174-0217 47 51
LH Regular 174-0218 47 51
Other Components
Pin 174-0219 46 50
Master Pin 174-0220 1 1
Bushing 8E-1886 46 50
Master Bushing 8E-1887 1 1
Washer 1S-4446 188 204
Spacer 1S-4445 2 2
Track Hardware 1
Bolt 174-0221 188 204
Nut 174-0222 188 204
1 Not part of the link assembly; required to assemble track group.

385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK SHOES

10.25" (260.4 mm) PITCH - 30 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service 25.6" (650 mm) 174-0227
Double Grouser (Trapezoidal Opening) 25.6" (650 mm) 174-0223
Double Grouser (Trapezoidal Opening, Clipped Grouser) 25.6" (650 mm) 174-0224
Double Grouser (Trapezoidal Opening) 29.0" (750 mm) 174-0225
Double Grouser (Trapezoidal Opening) 35.4" (900 mm) 174-0226

385C, 385CL, 385C FS, 385B, 385BL, 5090B SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (23 Tooth) 1 201-1704
Bolt 28 145-2970
Spacer 28 199-4501

125
 Excavators/Front Shovels
385C, 385B, 5090

385C, 385CL, 385C FS, 385B, 385BL, 5090B IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 194-1157
Components of Group
Idler Assembly 1 203-4862
1
Bearing 2 6Y-7599
1
Plug 1 7H-3171
Shaft 1 202-4902
Bearing Block 2 194-1156
Seal -- Duo-Cone Group 2 171-5825
1
Toric Ring 2 171-5714
Pin 2 194-1155
Dowel 2 194-1162
Plug 1 102-0883
Shaft O-Ring 2 2H-3934
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

385C, 385CL, 385C FS, 385B, 385BL, 5090B CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 242-4066
Components of Group
Roller Assembly 1 242-4067
1
Bearing 1 6Y-8171
1
Bearing 1 6Y-8172
Shaft Assembly 1 242-4070
Retainer 1 6Y-9339
Thrust Washer 1 6Y-8176
Cover 1 6Y-8177
Bolt 5 8T-8441
Seal -- Duo-Cone Group 1 171-5811
Toric Ring 1 2 171-5713
Seal -- Cover 1 4H-9105
Plug 1 7H-3171
2
Mounting Hardware
Bolt 6 7X-2584
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller.

126
 Excavators/Front Shovels
385C, 385B, 5090

385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) - 185-5065
Components of Group
Roller Shell (SF) 1 185-5093
2
Bearing 2 6Y-8127
Shaft 1 178-7292
End Collar 2 178-7291
Seal -- Duo-Cone Group 2 176-5332
Toric Ring 2 2 176-5334
Seal -- Shaft O-Ring 2 175-7900
Plug 1 9W-2146
Dowel 2 178-7540
Mounting Hardware 3
Bolt 4 107-3953
Washer 4 9X-8258
1 The 385C, 385B, 385C FS, 5090B uses 16 track rollers, the 385CL, 385BL uses 18 track rollers.
2 Component of preceding assembly or group; quantity shown per assembly or group.
3 Not included in roller group; quantity shown is required to mount each roller group.

385C, 385CL, 385C FS, 385B, 385BL, 5090B END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 189-3987 1
Bolt (30M) 16 8C-8723
Spacer 16 148-3111
1For 385B Front Mounting Position Number 2 Roller, Rear Mounting Position Number 7 Roller. For 385B L Front Mounting Position Number 2
Roller, Rear Mounting Position Number 8 Roller.

385B, 385BL FULL LENGTH ROLLER GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 174-8500
Guard Assembly 4 174-8501
Pipe 16 176-2146
Bolt (30M) 16 176-7524
Washer 32 9X-8258
Support Assembly 16 101-2160
Bolt (30M) 32 8C-8723
Spacer 32 148-3111

127
Excavators/Front Shovels
385C, 385B, 5090

385C, 385CL, 385C FS, 385B, 385BL, 5090B CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 176-2108
Bolt (30M) 8 8C-8723
Spacer 8 148-3111

128
 Excavators/Front Shovels
5110B

5110B TRACK
GREASED
AAA
10.25" (260.4 mm) PITCH -1 1/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 55 Section 2 125-9384
Components of Link Assembly
Track Links
RH Master 1 125-9381
LH Master 1 125-9380
RH Regular 54 9W-5933
LH Regular 54 9W-5934
Other Components
Pin 54 125-9383
Master Pin 1 125-9382
Bushing 55 143-0746
Seal Assembly 110 222-7001
Thrust Ring 110 9W-9625
Retaining Ring (PPR) 108 6Y-0471
Retaining Ring (Master) 2 7G-3431
1
Track Hardware
Bolt 220 5P-3868
Nut 220 5P-8221
1 Not part of link assembly; required to assemble track group.

5110B TRACK SHOES

10.25" (260.4 mm) PITCH 1 1/8" BOLT

TYPE WIDTH PART NUMBER

Double Grouser 1 27.6" (700 mm) 168-8409
1
Double Grouser 35.4" (900 mm) 168-8408
1
Double Grouser 39.0" (1000 mm) 168-8407
1 Keyed Shoe, Clipped Grousers and Center Punched Hole.

5110B SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (13 Teeth) 1 123-1216
Bolt (M30 x 3.5) 28 9X-6618
Washer 28 9X-8399
Bolt (M12 x 2) 3 8T-6429

129
 Excavators/Front Shovels
5110B

5110B IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 --
Components of Group
Idler Assembly 1 121-7351
1
Bearing 2 121-7371
1
Plug 1 2P-0347
Seal - Plug O-Ring 1 1 1S-8947
Shaft 1 123-1227
Bearing Block 2 167-1128
Pin 2 121-7373
Seal -- Duo-Cone Group 2 6T-8435
Toric Ring 1 2 1M-9011
Seal -- Shaft O-Ring 2 9M-3786
Bracket -- Tie 1 170-0820
Bolt (M30) 4 3E-8032
Washer 4 6I-7081
1 Component of preceding assembly or group; quantity shown is quantity per assembly.

5110B CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 159-8346
Components of Group
Roller Shell Assembly 1 126-4969
Bearing Sleeve 1 1 126-4975
1
Bearing 1 126-4976
Shaft Assembly (w/collar) 1 126-4968
Retainer 1 126-4971
Bolt 2 6V-5844
Cover Assembly 1 126-4970
Gasket 1 126-4977
Bolt 3 6V-5686
Seal -- Duo-Cone Group 1 176-5331
Toric Ring 1 2 176-5333
Plug 1 9W-2146
2
Mounting Hardware -
Bolt (M24) 1 6V-8132
Washer 1 8T-4167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Not included in roller group, quantities shown are required to mount each roller.

130
 Excavators/Front Shovels
5110B

5110B TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 18 230-7162
Components of Group
Roller Shell (SF) 1 230-7159
1
Bearing 2 125-7878
Shaft 1 230-7154
End Collar 2 230-7156
Washer 2 125-7879
Dowel 2 228-8376
Seal -- Duo-Cone Group 2 6T-8438
1
Toric Ring 2 2M-0344
Seal -- Shaft O-Ring 2 1S-7408
Plug 2 9W-2146
2
Mounting Hardware
Bolt (M30) 4 8T-6624
Washer 4 9X-8399
1 Component of preceding assembly or group; quantity shown per assembly or group.
2 Not included in roller group; quantity shown is required to mount each roller group.

5110B END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 123-1256
Bolt (30M) 16 7Y-5232
Washer 16 9X-8399

5110B FULL LENGTH GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 123-1273
Guard Assembly 4 127-0159
Bolt (M30) 32 7Y-5232
Washer 32 9X-8399
Pipe 16 127-0181
Bolt (M30) 16 113-1047
Washer 16 9X-8399
Support Assembly (Nut) 16 127-0204

131
Excavators/Front Shovels
5110B

5110B CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 175-7045
Bolt (30M) 8 7Y-5232
Washer 8 9X-8399

132
 Excavators/Front Shovels
5130B, 5130

5130B, 5130 TRACK

4CS, 5ZL, 7TJ
12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

QUANTITY PART NUMBER

Link Assembly -- 48 Section 2 124-8473 1
Components of Link Assembly
Track Links
RH Master 1 124-8469
LH Master 1 124-8470
RH Regular 47 6T-8049
LH Regular 47 6T-8050
Other Components
Pin 47 121-5394
Master Pin 1 121-5395
Bushing 48 207-6061
Seal Assembly 96 222-7007
Thrust Ring 96 256-6084
Retaining Ring (PPR) 94 6Y-0472
Retaining Ring (Master) 2 124-8468
2
Track Hardware
Bolt (Use with 162-5610, 11,12, shoes) 192 6T-8853
Bolt (Use with 153-7806, 07, 08, shoes & earlier design) 192 6I-8648
Nut 192 3T-6292
1 Positive pin Retention Track; Sealed & Greased.
2 Not part of link assembly; required to assemble track group.

5130B, 5130 TRACK SHOES

12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

TYPE WIDTH PART NUMBER

Double Grouser (Trapezoidal Opening) 25.6" (650 mm) 162-5610
Double Grouser (Trapezoidal Opening) 31.5" (800 mm) 162-5611
Double Grouser (Trapezoidal Opening) 39.4" (1000 mm) 162-5612

5130B, 5130 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (13 Teeth) 1 6I-7230
Bolt 30 3E-8032
Bolt 3 7X-2557
Washer 30 6I-7081

133
 Excavators/Front Shovels
5130B, 5130

5130B, 5130 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 --
Components of Group
Idler Assembly 1 218-5073
1
Bearing 2 6I-7083
Plug 1 2P-0347
Shaft 1 6I-7076
Bearing Block 2 6I-7077
Bracket-Tie 1 6I-7079
Pin 2 6I-7084
Bolt 4 3E-8032
Washer 4 6I-7081
Seal -- Duo-Cone Group 2 9W-4651
1
Toric Ring 2 5P-1608
Seal -- Shaft O-Ring 2 8T-6444
Seal -- Plug O-Ring 1 1S-8947
1 Component of preceding assembly or group; quantity shown per assembly or group.

5130B, 5130 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 159-8347
Components of Group
Roller Shell Assembly 1 113-5883
Bushing 1 126-4976
Bushing 1 126-4975
Shaft Assembly 1 113-5880
Retainer 2 126-4971
Bolt 2 6V-5844
Cover Assembly 1 126-4970
Gasket 1 126-4977
Bolt 3 6V-5686
Seal -- Duo-Cone Group 2 176-5331
Toric Ring 1 2 176-5333
Plug 1 9W-2146
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

134
 Excavators/Front Shovels
5130B, 5130

5130B, 5130 TRACK ROLLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Single Flange (SF) 16 -- 1 155-4102
Components of Group
Roller Shell Assembly (SF) 1 113-5894 155-4103
2
Bushing 2 113-5896 155-4105
Shaft 1 113-5891 178-3927
End Collar 2 178-3929 178-3929
Washer 2 -- 155-4106
Pin 2 113-5890 113-5890
Seal -- Duo-Cone Group 2 6T-8435 171-5897
2
Toric Ring 2 1M-9011 163-7376
Seal -- Shaft O-Ring 2 6V-5657 6V-5657
Plug 2 9W-2146 9W-2146
3
Mounting Hardware
Bolt 4 3E-8032 3E-8032
Washer 4 6I-7081 6I-7081
1 Upgrade to 155-4102
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Not included in roller group: Quantity shown is required to mount each roller.

5130B, 5130 TRACK GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 107-0356
Bolt 48 8T-0672
Washer 48 6V-8237

135
 Excavators/Front Shovels
5230

5230 TRACK 1
7LL
14.90" (378.5 mm) PITCH

FORMER PART
QUANTITY NUMBER PART NUMBER
Track Link/Shoe (47 sections)
43" (1100mm) Rock/General Purpose 1 -- 185-9380
Bushing (per shoe) 2 2 -- 168-7576
2
Bushing (per shoe) 4 -- 168-7577
51" (1300mm) Rock/General Purpose 1 -- 185-9381
2
Bushing (per shoe) 2 -- 168-7576
2
Bushing (per shoe) 4 -- 168-7577
59" (1550mm) Soft Underfoot 1 -- 185-9382
2
Bushing (per shoe) 2 -- 168-7576
2
Bushing (per shoe) 4 -- 168-7577
Other Components
Pin 94 110-3118 110-3118
Plate 94 110-3119 175-1229
Retaining Ring 94 107-1036 9T-2584
Track Groups
Track Group (5 sections) - 43" (1100mm) 3 9 -- 150-0392
3
Track Group (5 sections) - 51" (1300mm) 9 -- 150-0394
3
Track Group (5 sections) - 59" (1900mm) 9 -- 150-0396
1 5230 Track is a special shovel style track consisting of single piece cast track joints (shoe, links, and track guides) and solid, positively retained
track pins (refer to IRM's UC95-10, UC97-8, UC98-21, and UC01-03 for details).
2 Component of preceding assembly or group. Bushings can be ordered individually to repair a worn shoe or to retrofit into an old style shoe.
3 An additional 2 Shoes, 4 Pins, 4 Plates and 4 Retaining Rings must be ordered for a complete (47 section) track.

5230 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (14 Teeth) 1 131-7083
Bolt 46 100-3205
Washer 46 6I-7081
Seal -- O-Ring 1 7X-4778

136
 Excavators/Front Shovels
5230

5230 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 --
Components of Group
Idler Assembly 1 6I-7553
1
Bearing 2 6I-7555
Shaft 1 6I-7550
Bearing Block 2 6I-7508
Bolt 4 3E-8032
Washer 4 6I-7081
Pin 2 6I-7554
Seal -- Duo-Cone Group 2 9W-4652
Toric Ring 1 2 3P-1849
Seal -- Shaft O-Ring 2 4N-1230
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

5230 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 6I-7547
Components of Group
Roller Shell Assembly (SF) 1 113-5902
1
Bushing 2 113-5903
Shaft 1 113-5900
End Collar 2 113-5901
Pin 2 113-5899
Seal -- Duo-Cone Group 2 6T-8438
1
Toric Ring 2 2M-0344
Seal -- Shaft O-Ring 2 7F-6268
Plug 2 9W-2146
1 Component of preceding assembly or group.

137
 Excavators/Front Shovels
5230

5230 TRACK ROLLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Single Flange (SF) 16 -- 1 155-4107
Components of Group
Roller Shell Assembly (SF) 1 142-4413 2 155-4109
3
Bushing 2 142-4414 155-4111
Shaft 1 142-4412 178-2545
End Collar 2 173-9775 178-2543
Washer 2 -- 155-4112
Pin 1 113-5905 113-5905
Ring 2 113-5912 113-5912
Seal -- Duo-Cone Group 2 6T-8437 171-5898
Toric Ring 3 2 4M-0660 171-5899
Seal -- Shaft 2 2H-6124 2H-6124
Plug 2 9W-2146 9W-2146
1 Upgrade to 155-4107.
2 Former roller shell 113-5908 is cancelled and replaced by one 142-4413 roller assembly and one 142-4412 shaft.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

138
 Excavators/Front Shovels
205

205B TRACK
5ZF
6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 45 Section 2 8E-1442
Components of Link Assembly
Track Links
RH Master 1 9K-0029
LH Master 1 9K-0028
RH Regular 44 9K-6629
LH Regular 44 9K-6628
Other Components
Pin 44 9K-4060
Master Pin 1 9K-4062
Bushing 44 9K-4061
Master Bushing 1 7K-2020
Seal (Spring Washer) 180 7K-2018
Spacer 2 9K-4059
1
Track Hardware
Bolt 180 7H-3597
Nut 180 1M-1408
Special Group
Pin and Bushing Group (38 Sections) 1 1V-8623
1 Not part of link assembly; required to assemble track group.

139
 Excavators/Front Shovels
205

205 TRACK
3HC, 4DC
6.75" (171.5 mm) PITCH -- 16 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 47 Section 2 8U-3456 1
Components of Link Assembly
Track Links
RH Regular 47 8U-2927
LH Regular 47 8U-2926
Other Components
Pin 46 5W-4149
Master Pin 1 5W-4151
Bushing 46 5W-4148
Master Bushing 1 5W-4150
Spacer 2 5W-4152
2
Track Hardware
Bolt 188 3Y-4297
Bolt 3 188 7H-3597
Nut 188 1M-1408
1 Link assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.
2 Not part of link assembly; required to assemble track group.
3 Required for 35" (889 mm).

205 TRACK
3HC, 4DC
6.75" (171.5 mm) PITCH -- 14 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 47 Section 2 5W-7283 1
Components of Link Assembly
Track Links
RH Regular 47 5W-4147
LH Regular 47 5W-4146
Other Components
Pin 46 5W-4149
Master Pin 1 5W-4151
Bushing 46 5W-4148
Master Bushing 1 5W-4150
Spacer 2 5W-4152
2
Track Hardware
Bolt 188 7H-3596
Nut 188 7H-3606
1 Link assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.
2 Not part of link assembly; required to assemble track group.

140
 Excavators/Front Shovels
205

205 TRACK SHOES

5ZF
6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 8E-3332
Triple Grouser 29.5" (750 mm) 8E-3333
Triple Grouser 35.4" (900 mm) 8E-3334

205 TRACK SHOES

3HC, 4DC
6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 5W-9826
Triple Grouser 23.6" (600 mm) 5W-9830
Triple Grouser 29.5" (750 mm) 8U-2704
Triple Grouser 35.4" (900 mm) 5W-9834

205 TRACK SHOES

3HC, 4DC
6.75" (171.5 mm) PITCH -- 14 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 5W-4153
Triple Grouser 23.6" (600 mm) 5W-4154
Triple Grouser 29.5" (750 mm) 5W-4167
Triple Grouser 35.4" (900 mm) 5W-4155

205B, 205 SPROCKETS

5ZF, 3HC, 4DC

(PER SIDE) QUANTITY PART NUMBER

Sprocket (23 Teeth) 1 8E-1882
Bolt 16 8T-0281

141
 Excavators/Front Shovels
205

205 IDLERS
5ZF

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 9W-8045
Bearing 1 2 8E-0645
Shaft 1 9W-2143
Bearing Block 2 9C-2498
Seal -- Duo-Cone Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 7H-3171
Pin 2 9W-2145
Ring 1 1H-8397
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8E-5656
1
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

205 IDLERS
3HC, 4DC

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 5W-4168
1
Bearing 2 5W-4142
Shaft 1 5W-4159
Bearing Block 2 5W-4158
Seal -- Shaft O-Ring 2 4J-0526
Plug 1 9W-2146
Pin 2 5W-4040
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

142
 Excavators/Front Shovels
205

205 CARRIER ROLLERS

5ZF

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Bolt 3 0L-1351
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Shaft 1 1H-9696
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group.

205 CARRIER ROLLERS

3HC, 4DC

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-7494 1
1 This is Track Roller Gp; refer to 205 track roller section for serviceable components.

143
 Excavators/Front Shovels
205

205 TRACK ROLLERS

3HC, 4DC, 5ZF

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 8E-7494
Components of Group
Roller Shell (SF) 1 8E-7496
1
Bearing 2 8E-0645
Shaft 1 9W-2143
End Collar 2 9W-2144
Pin 2 9W-2145
Seal -- Duo-Cone Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 0L-1169
Washer 4 2S-5658
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
1
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

205 TRACK GUIDING GUARDS

5ZF

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 8U-1692
Bolt 16 6V-4429
Washer 16 3B-4510

205 TRACK GUIDING GUARDS

3HC, 4DC

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 5W-3915
Bolt 16 6V-4429
Washer 16 3B-4510

144
 Excavators/Front Shovels
211

211B TRACK
6XG
6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 51 Section 2 6T-0511
Components of Link Assembly
Track Links
RH Master 1 9K-0029
LH Master 1 9K-0028
RH Regular 50 9K-6629
LH Regular 50 9K-6628
Other Components
Pin 50 9K-4060
Master Pin 1 9K-4062
Bushing 50 9K-4061
Master Bushing 1 7K-2020
Seal (Spring Washer) 204 7K-2018
Spacer 2 9K-4059
1
Track Hardware
Bolt 204 7H-3597
Nut 204 1M-1408
Special Group
Pin and Bushing Group (38 Sections) 1 1V-8623
1 Not part of link assembly; required to assemble track group.

145
 Excavators/Front Shovels
211

211 TRACK
4EC, 5CC
6.75" (171.5 mm) PITCH -- 16 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 51 Section 2 5W-9836 1
Components of Link Assembly
Track Links
RH Regular 51 8U-2927
LH Regular 51 8U-2926
Other Components
Pin 50 5W-4149
Master Pin 1 5W-4151
Bushing 50 5W-4148
Master Bushing 1 5W-4150
Spacer 2 5W-4152
2
Track Hardware
Bolt 204 3Y-4297
Bolt 3 204 7H-3597
Nut 204 1M-1408
1 Link assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.
2 Not part of link assembly; required to assemble track group.
3 Required for 35" (889 mm) and 39" (990 mm).

211 TRACK
4EC, 5CC
6.75" (171.5 mm) PITCH -- 14 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 51 Section 2 5W-4166 1
Components of Link Assembly
Track Links
RH Regular 51 5W-4147
LH Regular 51 5W-4146
Other Components
Pin 50 5W-4149
Master Pin 1 5W-4151
Bushing 50 5W-4148
Master Bushing 1 5W-4150
Spacer 2 5W-4152
2
Track Hardware
Bolt 204 7H-3596
Nut 204 7H-3606
1 Link Assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.
2 Not part of link assembly; required to assemble track group.

146
 Excavators/Front Shovels
211

211B TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 8E-3332
Triple Grouser 29.5" (750 mm) 8E-3333
Triple Grouser 35.4" (900 mm) 8E-3334
Triple Grouser 39.4" (1000 mm) 8E-3335

211 TRACK SHOES

6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 5W-9826
Triple Grouser 23.6" (600 mm) 5W-9830
Triple Grouser 29.5" (750 mm) 8U-2704
Triple Grouser 35.4" (900 mm) 5W-9834
Triple Grouser 39.4" (1000 mm) 5W-9841

211 TRACK SHOES

6.75" (171.5 mm) PITCH -- 14 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 5W-4153
Triple Grouser 23.6" (600 mm) 5W-4154
Triple Grouser 29.5" (750 mm) 5W-4167
Triple Grouser 35.4" (900 mm) 5W-4155

211B, 211 SPROCKETS

4EC, 5CC,6XG

(PER SIDE) QUANTITY PART NUMBER

Sprocket (23 Teeth) 1 8E-1882
Bolt 16 8T-0281

147
 Excavators/Front Shovels
211

211B, 211 IDLERS

6XG

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 9W-8045
Bearing 1 2 8E-0645
Shaft 1 9W-2143
Bearing Block 2 9C-2498
Seal -- Duo-Cone Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 7H-3171
Pin 2 9W-2145
Ring 1 1H-8397
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
1
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

211 IDLERS
4EC, 5CC

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 5W-4168
1
Bearing 2 5W-4142
Shaft 1 5W-4159
Bearing Block 2 5W-4158
Seal -- Shaft O-Ring 2 4J-0526
Plug 1 9W-2146
Pin 2 5W-4040
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

148
 Excavators/Front Shovels
211

211B CARRIER ROLLERS

6XG

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Bolt 3 0L-1351
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Shaft 1 1H-9696
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding asssembly or group.

211 CARRIER ROLLERS

4EC, 5CC

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-7494 1
1 This is Track Roller Gp; refer to 211 track roller section for serviceable components.

149
 Excavators/Front Shovels
211

211B, 211 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 20 8E-7494
Components of Group
Roller Shell (SF) 1 8E-7496
1
Bearing 2 8E-0645
Shaft 1 9W-2143
End Collar 2 9W-2144
Pin 2 9W-2145
Seal -- Duo-Cone Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 0L-1169
Washer 4 2S-5658
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
1
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

211B TRACK GUIDING GUARDS

6XG

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 8U-1692
Bolt 16 6V-4429
Washer 16 3B-4510

211 TRACK GUIDING GUARDS

4EC, 5CC

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 5W-3915
Bolt 16 6V-4429
Washer 16 3B-4510

150
 Excavators/Front Shovels
213

213 TRACK
1EJ
6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 51 Section 2 6T-0511
Components of Link Assembly
Track Links
RH Master 1 9K-0029
LH Master 1 9K-0028
RH Regular 50 9K-6629
LH Regular 50 9K-6628
Other Components
Pin 50 9K-4060
Master Pin 1 9K-4062
Bushing 50 9K-4061
Master Bushing 1 7K-2020
Seal (Spring Washer) 204 7K-2018
Spacer 2 9K-4059
1
Track Hardware
Bolt 204 7H-3597
Nut 204 1M-1408
Special Group
Pin and Bushing Group (38 Sections) 1 1V-8623
1 Not part of link assembly; required to assemble track group.

151
 Excavators/Front Shovels
213

213 TRACK
1EJ
6.75" (171.5 mm) PITCH -- 16 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 51 Section 2 5W-9836 1
Components of Link Assembly
Track Links
RH Regular 51 8U-2927
LH Regular 51 8U-2926
Other Components
Pin 50 5W-4149
Master Pin 1 5W-4151
Bushing 50 5W-4148
Master Bushing 1 5W-4150
Spacer 2 5W-4152
2
Track Hardware
Bolt 204 3Y-4297
Bolt 3 204 7H-3597
Nut 204 1M-1408
1 Link Assembly provided on Made As Ordered (MAO) basis only; Individual components are directly serviced.
2 Not part of link assembly; required to assemble track group.
3 Required for 35" (889 mm) and 39" (990 mm)

213 TRACK
3ZC, 9XB
6.75" (171.5 mm) PITCH -- 14 mm BOLT

UNSEALED
PART NUMBER 42 SECTION 51 SECTION
Link Assembly (Quantity 2) 5W-4165 1 5W-4166 1
Components of Link Assembly
Track Links
RH Regular 5W-4147 42 51
LH Regular 5W-4146 42 51
Other Components
Pin 5W-4149 41 50
Master Pin 5W-4151 1 1
Bushing 5W-4148 41 50
Master Bushing 5W-4150 1 1
Spacer 5W-4152 2 2
2
Track Hardware
Bolt 7H-3596 168 204
Nut 7H-3606 168 204
1 Link assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.
2 Not part of link assembly; required to assemble track group.

152
 Excavators/Front Shovels
213

213 TRACK SHOES

1EJ
6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 8E-3332
Triple Grouser 29.5" (750 mm) 8E-3333
Triple Grouser 35.4" (900 mm) 8E-3334
Triple Grouser 39.4" (1000 mm) 8E-3335

213 TRACK SHOES

1EJ
6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 5W-9826
Triple Grouser 23.6" (600 mm) 5W-9830
Triple Grouser 29.5" (750 mm) 8U-2704
Triple Grouser 35.4" (900 mm) 5W-9834
Triple Grouser 39.4" (1000 mm) 5W-9841

213 TRACK SHOES

3ZC, 9XB
6.75" (171.5 mm) PITCH -- 14 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 5W-4153
Triple Grouser 23.6" (600 mm) 5W-4154
Triple Grouser 29.5" (750 mm) 5W-4167
Triple Grouser 35.4" (900 mm) 5W-4155

213 SPROCKETS
1EJ

(PER SIDE) QUANTITY PART NUMBER

Sprocket (23 Teeth) 1 8E-1882

213 SPROCKETS
3ZC, 9XB

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 5W-4171

153
 Excavators/Front Shovels
213

213 IDLERS
1EJ (LATER MODELS)

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 9W-8045
Bearing 1 2 8E-0645
Shaft 1 9W-2143
Bearing Block 2 9C-2498
Seal -- Duo-Cone Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 7H-3171
Pin 2 9W-2145
Ring 1 1H-8397
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
1
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

213 IDLERS
1EJ (EARLY MODELS), 3ZC, 9XB

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 5W-4168
1
Bearing 2 5W-4142
Shaft 1 5W-4159
Bearing Block 2 5W-4158
Seal -- Shaft O-Ring 2 4J-0526
Plug 1 9W-2146
Pin 2 5W-4040
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

154
 Excavators/Front Shovels
213

213 CARRIER ROLLERS

1EJ

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Bolt 3 0L-1351
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Shaft 1 1H-9696
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group

213 CARRIER ROLLERS

1EJ (EARLY MODELS), 3ZC, 9XB

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-7494 1
1 Track Roller; refer to 213 track roller section for serviceable components.

155
 Excavators/Front Shovels
213

213 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 20 8E-7494
Components of Group
Roller Shell (SF) 1 8E-7496
1
Bearing 2 8E-0645
Shaft 1 9W-2143
End Collar 2 9W-2144
Pin 2 9W-2145
Seal -- Duo-Cone Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 0L-1169
Washer 4 2S-5658
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
3
Toric Ring 2 8S-5653
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.
3 Component of preceding assembly or group; quanitity shown is per assembly or group.

213 TRACK GUIDING GUARDS

1EJ

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 8U-1692
Bolt 16 6V-4429
Washer 16 3B-4510

213 TRACK GUIDING GUARDS

1EJ (EARLY MODELS), 3ZC, 9XB

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 5W-3915
Bolt 16 6V-4429
Washer 16 3B-4510

156
 Excavators/Front Shovels
215

215 TRACK
LONG PIN
(44 SECTION & 51 SECTION): 14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB
6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED
PART
NUMBER 44 SECTION 51 SECTION
1
Link Assembly -- (Quantity 2) - 6T-0511 2
Components of Link Assembly
Track Links
RH Master 9K-0029 1 1
LH Master 9K-0028 1 1
RH Regular 9K-6629 43 50
LH Regular 9K-6628 43 50
Other Components
Pin 9K-4060 43 50
Master Pin 9K-4062 1 1
Bushing 9K-4061 43 50
Master Bushing 7K-2020 1 1
Seal (Spring Washer) 7K-2018 176 204
Spacer 9K-4059 2 2
3
Track Hardware
Bolt 7H-3597 176 204
Nut 1M-1408 176 204
Special Group
Pin and Bushing Group (38 Sections) 1V-8623 1 1
1 Order 51 section 6T-0511 Link Assembly and remove 7 sections.
2 For Sealed & Lubricated Track, order 40 Section (154-3657) Link Assembly and add appropriate number of sections, also requires ordering a
master shoe.
3 Not part of link assembly; required to assemble track group.

157
 Excavators/Front Shovels
215

215 TRACK
SHORT PIN
(44 & 51 SECTION): 14Z432-760
6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED
PART
NUMBER 44 SECTION 51 SECTION
1
Link Assembly (Quantity 2) - 5C-0949
Components of Link Assembly
Track Links
RH Master 9K-0029 1 1
LH Master 9K-0028 1 1
RH Regular 9K-6629 43 50
LH Regular 9K-6628 43 50
Other Components
Pin 3A-4133 43 50
Master Pin 3A-4132 1 1
Bushing 3A-4131 43 50
Master Bushing 5C-4088 1 1
Seal (Spring Washer) 7K-2018 176 204
Spacer 9K-4059 2 2
2
Track Hardware
Bolt 7H-3597 176 204
Nut 1M-1408 176 204
1 Order 51 section 5C-0949 Link Assembly and remove 7 sections.
2 Not part of link assembly; required to assemble track group.

158
 Excavators/Front Shovels
215

215 TRACK
(44 & 51 SECTION): 14Z1-431, 57Y1-2030, 96L
6.75" (171.5 mm) PITCH -- 9/16" BOLT

SEALED
PART
NUMBER 44 SECTION 51 SECTION
Link Assembly (Quantity 2) 6A-4713 5C-4089
Components of Link Assembly
Track Links
RH Regular 7K-1825 44 51
LH Regular 7K-1826 44 51
Other Components
Pin 5C-4095 43 50
Master Pin 5C-4092 1 1
Bushing 5C-4094 43 50
Master Bushing 5C-4088 1 1
Seal (Spring Washer) 7K-2018 176 204
Spacer 7K-2016 2 2
1
Track Hardware
Bolt 4K-7038 176 204
Nut 7K-2017 176 204
1 Not part of link assembly; required to assemble track group.

215 TRACK SHOES

FOR USE WITH 6T0511 LINK ASSEMBLY
6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Moderate Service 24.0" (610 mm) 1V-7069
Triple Grouser 19.7" (500 mm) 6T-0513
Triple Grouser 23.6" (600 mm) 8E-3332
Triple Grouser 28.0" (710 mm) 6T-0517
Triple Grouser 39.4" (1000 mm) 8E-3335

215 TRACK SHOES

FOR USE WITH 5C0949 LINK ASSEMBLY
6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 3T-3648
Triple Grouser 24.0" (610 mm) 3T-3647
Triple Grouser 27.8" (705 mm) 3T-3646
Triple Grouser 40.0" (1015 mm) 5C-5585

159
Excavators/Front Shovels
215

215 TRACK SHOES

6.75" (171.5 mm) PITCH -- 9/16" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 3A-4129
Triple Grouser 24.0" (610 mm) 5C-0768
Triple Grouser 27.8" (705 mm) 6A-7527

215 SPROCKETS
14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (23 Teeth) 1 6C-3495
Rim (23 Teeth) 1 3T-9153

215 SPROCKETS
14Z1-760, 57Y1-2030, 96L

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (23 Teeth) 1 6A-7539
Rim (23 Teeth) 1 3T-9154

160
 Excavators/Front Shovels
215

215 IDLERS
14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER SIDE) QUANTITY PART NUMBER

Idler Group 2 8V-9106
Components of Group
Idler Assembly 1 8E-8907
1
Bushing Assembly 2 1V-9611
1
Bearing 1 7K-1089
Shaft 1 8V-4714
Bearing Block 2 8V-4713
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shift O-Ring 2 7F-8267
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 6Y-0473
Stopper 1 7G-4332
Lock 2 5M-5000
Bolt 2 7X-0318
Washer 2 7X-0563
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

161
 Excavators/Front Shovels
215

215 IDLERS
14Z1-760, 57Y1-2030, 96L

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 5C-6602
Bushing Assembly 1 2 3A-4790
Shaft 1 6A-4725
Washer Thrust 2 5C-4314
Bearing Block 2 8V-2695
Seal -- Duo-Cone Group 2 216-2957
Toric Ring 1 2 216-2956
Seal -- Shaft O-Ring 2 1H-9696
Plug 1 9F-2247
Lock 2 5M-5000
Bolt 2 7X-0318
Washer 2 7X-0563
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

162
 Excavators/Front Shovels
215

215 CARRIER ROLLERS

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Bolt 3 0L-1351
Plate 1 6K-9860
Bolt 2 6V-4791
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Shaft 1 1H-9696
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group.

163
 Excavators/Front Shovels
215

215 CARRIER ROLLERS

14Z1-760, 57Y1-2030, 96L

(PER MACHINE) QUANTITY PART NUMBER

Group 4 3T-4618
Components of Group
Roller Shell 1 3T-4617
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 4H-9527
Collar Assembly 1 1M-7918
Bolt 5 0S-0509
Plate 1 6K-9860
Bolt 2 6V-4791
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 4H-9628
Seal -- Shaft 1 1H-9696
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group.

164
 Excavators/Front Shovels
215

215 TRACK ROLLERS

4HG, 9TF, 9YB1037-UP

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 20 8E-7494 1
Components of Group
Roller Shell (SF) 1 8E-7496
2
Bearing 2 8E-0645
Shaft 1 9W-2143
End Collar 2 9W-2144
Pin 2 9W-2145
Seal -- Duo-Cone Group 2 9W-2142
2
Toric Ring 2 8H-2265
Seal -- Shaft O-Ring 2 7F-8268
Plug 1 9W-2146
Mounting Hardware 3
Bolt 4 0L-1169
Washer 4 2S-5658
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
2
Toric Ring 2 8S-5653
1 Excavator style roller; roller can be retrofited to earlier models using 118-1608 rollers; some guiding guard modification will be required.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

165
 Excavators/Front Shovels
215

215 TRACK ROLLERS

14Z761-UP, 2XC, 57Y2031-UP, 9TF, 9YB1-1036

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 20 118-1608
Components of Group
Roller Shell (SF) 1 9P-7782
Bushing Assembly 2 1V-9611
1
Bearing 1 7K-1089
Shaft 1 118-1610 2
End Collar 2 118-1616 3
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Plug 1 6Y-0473
Stopper 1 7G-4332
4
Mounting Hardware
Bolt 4 1A-1135
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Replaces former 3K-6616 shaft; requires 2-118-1616 end collars
3 If 3K-6616 shaft is used, use 2--5K-7187 end collars.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

166
 Excavators/Front Shovels
215

215 TRACK ROLLERS

14Z1-760, 57Y1-2030, 96L

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 231-3079
Components of Group
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
2
Bearing 1 6Y-4744
Shaft 1 6S-3171
End Collar 2 3T-4283
Ring 2 6S-3172
Thrust Washer 2 6S-7715
Seal -- Duo-Cone Group 2 216-2957
Toric Ring 2 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
Mounting Hardware 3
Bolt 4 0S-1585
Washer 4 2M-0849
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5P-0373
Toric Ring 2 2 3N-3095
1 20 required for long roller frame arrangement.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

215 TRACK GUIDING GUARDS (SEGMENTED)

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 8V-8691
Bolt 8 8T-6871
Washer 8 8T-4122
Spacer 8 9M-7783

215 TRACK GUIDING GUARDS (SEGMENTED)

14Z1-760, 57Y1-2030, 96L

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 5C-8823
Bolt 8 8T-6871
Washer 8 8T-4122
Spacer 8 9M-7783

167
Excavators/Front Shovels
215

215 TRACK ROLLER GUARDS

FULL LENGTH ONE PIECE
14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 3V-8998
Bolt 28 7X-0366
Bolt 14 031-9099
Washer 56 8T-4994
Nut 14 6V-8182
Spacer 14 3V-9002

215 TRACK ROLLER GUARDS

FULL LENGTH TWO PIECE
14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 8V-3506
Guard Assembly 4 8V-3507
Bolt 36 0S-1625
Bolt 18 4B-7572
Washer 36 5P-8247
Washer 36 5P-8249
Nut 18 1A-5666
Spacer 36 9M-7783
Tube 18 8V-3502

168
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK

2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG
7.50" (190.5 mm) PITCH -- 3/4" BOLT

SEALED
PART
NUMBER 43 SECTION 49 SECTION
Link Assembly (Quantity 2) 6Y-8183 6Y-8184
Components of Link Assembly
Track Links
RH Regular 7T-4043 43 49
LH Regular 7T-4044 43 49
Other Components
Pin 6Y-8186 42 48
Master Pin 6Y-8185 1 1
Bushing 5S-0710 42 48
Master Bushing 5S-0753 1 1
Seal (Spring Washer) 5S-0709 172 196
Spacer 5S-0754 2 2
1
Track Hardware
Bolt 1S-1859 172 196
Nut 1S-1860 172 196
1 Not part of link assembly; required to assemble track group.

169
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK

2ZD1-549, 4JC, 51U2832-UP, 76U1649-UP, 4FC1-735
6.91" (175.5 mm) PITCH -- 5/8" BOLT

SEALED
PART
NUMBER 46 SECTION 53 SECTION
1
Link Assembly -- (Quantity 2) -- 3V-9025
Components of Link Assembly
Track Links
RH Master 3P-7155 1 1
LH Master 3P-7156 1 1
RH Regular 3P-7153 45 52
LH Regular 3P-7154 45 52
Other Components
Pin 6B-5502 45 52
Master Pin 8M-7456 1 1
Bushing 5S-0710 45 52
Master Bushing 5S-0753 1 1
Seal (Spring Washer) 5S-0709 184 212
Spacer 5S-0754 2 2
2
Track Hardware
Bolt 7H-3597 184 212
Nut 1M-1408 184 212
Special Group
Pin and Bushing Group (38 Sections) 6P-4234 1 1
1 Order 46 Section 3P-5762 (D5 Sealed) Link Assembly and replace split master with fill master.
2 Not part of link assembly; required to assemble track group.

170
 Excavators/Front Shovels
215SA, 219, 225

225 TRACK
51U1-2831, 76U1-1648
6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED
PART
NUMBER 47 SECTION 54 SECTION
1
Link Assembly -- 47 Section 8K-0323 8K-4699 1
Components of Link Assembly
Track Links
RH Master 9K-0029 1 1
LH Master 9K-0028 1 1
RH Regular 9K-6629 46 53
LH Regular 9K-6628 46 53
Other Components
Pin 9K-4060 46 53
Master Pin 9K-4062 1 1
Bushing 9K-4061 46 53
Master Bushing 7K-2020 1 1
Seal (Spring Washer) 7K-2018 188 216
Spacer 9K-4059 2 2
2
Track Hardware
Bolt 7H-3597 188 216
Nut 1M-1408 188 216
Special Group
Pin and Bushing Group (38 Sections) 1V-8623 1 1
1 For Sealed & Lubricated Track, order 40 Section (154-3657) Link Assembly and add appropriate number of sections.
2 Not part of link assembly; required to assemble track group.

215SA, 219, 225 TRACK SHOES

7.50" (190.5 mm) PITCH -- 3/4" BOLT

TYPE WIDTH PART NUMBER

Moderate Service 28.0" (710 mm) 6Y-2040
Moderte Service 21.7" (550 mm) 6Y-4738
Triple Grouser 21.7" (550 mm) 9W-6728
Triple Grouser 26.0" (660 mm) 9W-6726
Triple Grouser 30.0" (760 mm) 9W-6727
Triple Grouser 34.0" (860 mm) 7Z-8877

171
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK SHOES

6.91" (175.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-2981
Triple Grouser 21.7" (550 mm) 3V-9489
Triple Grouser (Center Punched Slots) 24.0" (610 mm) 1N-9701
Triple Grouser 30.0" (760 mm) 3V-9114

215SA, 219, 225 TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH PART NUMBER

Moderate Service (Clipped Grouser) 30.0" (760 mm) 8K-2276
Triple Grouser 24.0" (610 mm) 8K-8305
Triple Grouser 30.0" (760 mm) 8K-2271

215SA, 219, 225 SPROCKETS

2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG
7.50" (190.5 mm) PITCH -- 3/4" BOLT

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (21 Teeth) 1 9C-2646
Rim (21 Teeth) 1 8E-9805 1
1 See IRM UC96-24 for additional information.

215SA, 219, 225 SPROCKETS

2ZD1-549, 4FC418-735, 8YD, 8XD, 51U5853-UP, 76U5466-UP
6.91" (175.5 mm) PITCH -- 5/8" BOLT

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (23 Teeth) 1 6W-2451 1
Rim (23 Teeth) 1 3T-9152
1For the following serial number machines 4JC, 4FC1-417, 51U2832-5852, 76U1649-5465, New sprocket mounting compoents will be required to
upgrade to this sprocket assembly, refer to IRM UC85-18.

215, 225 SPROCKETS

51U1-2831, 76U1-1648
6.75" (171.5 mm) PITCH -- 5/8" BOLT

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (23 Teeth) 1 3V-1727
Rim (23 Teeth) 1 3T-9153

172
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 IDLERS

2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 4C-2084
Components of Group
Idler Assembly 1 3V-5131
Bushing Assembly 2 3P-8272
1
Bearing 1 8P-6652
Shaft 1 5K-0305
Bearing Block 2 3V-5073
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Bolt 12 8T-2502
Washer 12 8T-4896
Plug 1 2P-0347
Pin 2 5M-5000
Bolt 2 7X-0311
Washer 2 7X-0563
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

173
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 IDLERS

51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 8E-8907
Bushing Assembly 2 1V-9611
1
Bearing
Shaft 1 4K-9984
Bearing Block 2 8K-0321
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 4F-7952
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Pin 2 5M-5000
Bolt 2 0T-0319
Washer 2 4K-9943
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
Toric Ring 1 2 2S-2181
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

174
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 CARRIER ROLLERS

2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBER

Group 4 5A-8374
Components of Group
Roller Shell 1 5A-8375
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 5K-9107
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Shaft O-Ring 1 1H-9696
Seal -- Plug 1 1S-8947
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group.

175
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 CARRIER ROLLERS

51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Plate 1 6K-9860
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Shaft O-Ring 1 1H-9696
Seal -- Plug 1 1S-8947
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 1 5K-6191
1
Toric Ring 2 2S-2181
1 Component of preceding assembly or group.

176
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK ROLLERS

2SJ, 2ZD550-UP, 3YD, 5CF, 5XG, 6RG

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 8E-4573 2
Components of Group
Roller Shell (SF) 1 8E-4574
Shaft 1 9W-3198
End Collar 2 8E-5467
Pin 2 9W-2204
Seal -- Duo-Cone Group 2 9W-2201
Toric Ring 3 2 6H-1309
Seal -- Shaft O-Ring 2 1H-5728
Plug 1 9W-2146
Mounting Hardware 4
Bolt 4 7F-5227
Washer 4 5P-8248
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 3P-1848
Toric Ring 3 2 3P-1847
Seal -- Shaft O-Ring 2 8M-4395
1 20 required for long roller frame machines.
2 Excavator style roller.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

177
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK ROLLERS

2ZD1-549, 4FC351-UP, 51U6255-UP, 76U5159-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 8E-5745 2
Components of Group
Roller Shell (SF) 1 8E-4574
Shaft 1 9W-2202
End Collar 2 8E-5468
Pin 2 9W-2204
Seal -- Duo-Cone Group 2 9W-2201
Toric Ring 3 2 6H-1309
Seal -- Shaft O-Ring 2 1H-5728
Plug 1 9W-2146
Mounting Hardware 4
Bolt 4 0L-1169
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 3P-1848
Toric Ring 3 2 3P-1847
Seal -- Shaft O-Ring 2 8M-4395
1 20 required for long roller frame machines.
2 Excavator style roller.
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

178
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK ROLLERS

4FC1-350, 4JC, 51U2832-6254, 76U1649-5158

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 118-1611
Components of Group
Roller Shell (SF) 1 9S-9535
Bushing Assembly 2 2P-8045
2
Bearing 1 8P-6652
Shaft 1 118-1613 3
End Collar 2 5M-0627 4
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt 4 8S-9092
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 5K-1770
Seal -- Shaft O-Ring 2 8M-5661
1 20 required for long roller frame machines.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Replaces former 5M-1915 shaft; requires 2 - 5M-0627 end collars.
4 If 5M-1915 shaft is used, use 1 - 5M-0627 and 1 - 1M-3812 end collar.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

179
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK ROLLERS

51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 118-1608
Components of Group
Roller Shell (SF) 1 9P-7782
Bushing Assembly 2 1V-9611
2
Bearing 1 7K-1089
Shaft 1 118-1610 3
End Collar 2 118-1616 4
Ring 2 6H-7382
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 2 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt 4 1A-1135
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 5K-6191
2
Toric Ring 2 2S-2181
Seal -- Bushing O-Ring 2 5K-1770
Seal -- Shaft O-Ring 2 8M-5661
1 20 required for long roller frame machines.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Replaces former 3K-6616 shaft, requires 2 - 118-1616 end collars.
4 If 3K-6616 shaft is used, use 2 - 5K-7187 end collars.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

215SA, 219, 225 TRACK GUIDING GUARDS (SEGMENTED)

2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 3V-9091
Bolt 8 1A-8063
Washer 8 8T-4994
Spacer 8 4F-6568

180
 Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK GUIDING GUARDS (SEGMENTED)

51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 8K-4444
Bolt 8 0S-1625
Bolt 16 0S-1595
Washer 8 4D-3704
Washer 8 7D-1649
Spacer 8 9M-7783
Bar 4 8K-4438

215SA, 219, 225 TRACK ROLLER GUARDS

FULL LENGTH, SHORT UNDERCARRIAGE
2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 3V-8998
Bolt 28 7X-0366
Bolt 14 031-9099
Washer 56 8T-4994
Nut 14 6V-8182
Spacer 14 3V-9002

215SA, 219, 225 TRACK ROLLER GUARDS

FULL LENGTH, LONG UNDERCARRIAGE
2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 3V-9011
Bolt 36 7X-0366
Bolt 18 031-9099
Washer 72 8T-4994
Nut 18 6V-8182
Spacer 18 3V-9002

181
Excavators/Front Shovels
215SA, 219, 225

215SA, 219, 225 TRACK ROLLER GUARDS

FULL LENGTH, SHORT UNDERCARRIAGE
51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 3V-4745
Guard Assembly 2 3V-4746
Bolt 36 1A-1135
Bolt 14 2P-9845
Washer 28 2S-0115
Washer 36 4D-3704
Nut 14 1B-4207
Spacer 14 3V-4764

215SA, 219, 225 TRACK ROLLER GUARDS

FULL LENGTH, LONG UNDERCARRIAGE
51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 3V-5029
Guard Assembly 2 3V-5030
Bolt 44 1A-1135
Bolt 18 2P-9845
Washer 36 2S-0115
Washer 44 4D-3704
Nut 18 1B-4207
Spacer 18 3V-4764

182
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK 1

HYBRID LINKS
10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U
8.00" (203.2 mm) PITCH -- 3/4" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 47 Section 2 238-9956 2
Components of Link Assembly
Track Links
RH Master 1 240-2503
LH Master 1 240-2504
RH Regular 46 228-2735
LH Regular 46 228-2736
Other Components
Pin 46 4M-5989
Master Pin 1 8E-0855
Bushing 46 237-7305
Master Bushing 1 237-7506
Seal (Spring Washer) 188 8M-7231
Spacer 2 8M-7290
3
Track Hardware
Bolt 188 1S-1859
Nut 188 1S-1860
1 The 231 Excavator (Serial No. "1NK") use a 54 section link assembly, order 238-9958. Also see note 2 regarding hybrid link assembly and
sprocket to use.
2 Hybrid link assembly can only be used with a worn (current rim part number 9M-3818) sprocket, or new (new rim part number 246-5228)
sprocket.
3 Not part of link assembly: required to assemble track group.

183
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK 1

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U
8.00" (203.2 mm) PITCH -- 3/4" BOLT

SEALED
(PER MACHINE) QUANTITY PART NUMBER
Link Assembly -- 47 Section 2 8E-4713 2
Components of Link Assembly
Track Links
RH Master 1 6P-6129
LH Master 1 6P-6130
RH Regular 46 3P-1112
LH Regular 46 3P-1113
Other Components
Pin 46 4M-5989
Master Pin 1 8E-0855
Bushing 46 4M-5991
Master Bushing 1 4M-5992
Seal (Spring Washer) 188 8M-7231
Spacer 2 8M-7290
3
Track Hardware
Bolt 188 1S-1859
Nut 188 1S-1860
1 The 231 Excavator (Serial No. "1NK") use a 54 section link assembly, order 238-9958. Also see note 2 regarding hybrid link assembly and
sprocket to use.
2 Service replaced by 238-9956 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number 9M-3818)
sprocket, or new (new rim part number 246-5228) sprocket.
3 Not part of link assembly: required to assemble track group.

FB227 TRI-LINK TRACK

8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 47 Section 2 238-9956
Components of Outrigger Chain (Serviced individually; quantities shown are per machine) 1
Track Links
RH Regular 47 8E-2355
LH Regular 47 8E-2356
Other Components
Stub Pin 94 106-8237
Stub Bushing 94 6Y-1348
2
Track Hardware (quantities shown are per machine)
Bolt (Center Chain) 188 1S-1859
Bolt (Tri) 188 6V-1792
Nut 376 1S-1860
1 Outrigger chains consist of D6H components: refer to shoe section for special tri-track shoes.
2 Not part of link assembly; required to assemble track group.

184
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

TYPE WIDTH PART NUMBER

1
Extreme Service 22.0" (560 mm) 6Y-6411
Extreme Service 24.0" (610 mm) 6Y-6398
Extreme Service (Clipped Grouser, Trapezoidal Opening) 1 24.0" (610 mm) 3Q-5391
Extreme Service (Clipped Grouser) 1 28.0" (710 mm) 6Y-6407
Extreme Service 30.0" (760 mm) 6Y-6405
Triple Grouser 23.6" (600 mm) 8E-7868
Double Grouser 21.7" (550 mm) 8E-4496
Double Grouser 28.0" (710 mm) 1Q-4983
Triple Grouser 28.0" (710 mm) 9K-3565
Triple Grouser 32.0" (810 mm) 1V-0557
Triple Grouser 36.0" (915 mm) 9K-3568
2
Tri-Extreme Service (Off-set RH) 28.0" (710 mm) 1Q-4717
2
Tri-Extreme Service (Off-set LH) 28.0" (710 mm) 1Q-4718
1 With moderate service heat treat specifications
2 FB227 machine option.

225SA, FB227, 229, 231 SPROCKETS

10W, 1AG, 1GF, 1NK, 2LJ, 51U2832-UP, 5WJ, 76U1649-UP

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (25 Teeth) (Not for use with hybrid links) 1 5V-4969
Rim (25 Teeth) 1 246-5228

225SA, FB227, 229, 231 SPROCKETS

51U1-2831, 76U1-1648

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (25 Teeth) (Not for use with hybrid links) 1 8K-2743
Rim (25 Teeth) 1 246-5228

185
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 IDLERS

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 8E-6135
Bushing Assembly 2 3P-8432
1
Bearing 1 8P-6651
Shaft 1 2V-8627
Bearing Block 2 9C-4224
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Pin 2 5M-5000
Bolt 2 7X-0313
Washer 2 7X-0563
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

186
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 CARRIER ROLLERS

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER MACHINE) QUANTITY PART NUMBER

Group 4 3T-3206
Components of Group
Roller Shell 1 9S-8320
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Seal -- Duo-Cone Group 2 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Shaft O-Ring 1 1H-9696
Seal -- Plug 1 1S-8947
1 Component of preceding assembly or group.

225SA, FB227, 229, 231 TRACK ROLLERS

10W343-UP, 1AG, 1GF, 1NK, 2LJ, 5WJ, 76U6074-UP

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 8E-4576 1
Components of Group
Roller Shell (SF) 1 8E-4577
2
Bearing 1 9W-3359
Shaft 1 9W-4962
End Collar 2 9W-4961
Pin 2 9W-4960
Seal -- Duo-Cone Group 2 9W-2201
2
Toric Ring 2 6H-1309
Seal -- Shaft O-Ring 2 1H-7339
Plug 1 9W-2146
Mounting Hardware 3
Bolt 4 3B-2968
Washer 4 5P-8248
1 Excavator style roller.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

187
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 STANDARDIZED TRACK ROLLERS

10W216-342, 51U, 76U1-6073

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 288-0934
Single Flange (SF) (Arctic) 16 288-0945
Single Flange (SF) (High Heat) 16 288-0947
Mounting Hardware 1
Cap 2 317-9079
Bolt (3/4") 4 1D-4610
Washer 2 5P-8248
1 These components are not included in the roller group; quantities shown are required to mount each roller.

225SA, FB227, 229, 231 STANDARDIZED TRACK ROLLERS

10W1-215

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 288-0934
Single Flange (SF) (Arctic) 16 288-0945
Single Flange (SF) (High Heat) 16 288-0947
1
Mounting Hardware
Cap 2 317-9078
Bolt (5/8") 4 1D-4585
Washer 2 2S-0736
1 These components are not included in the roller group; quantities shown are required to mount each roller.

188
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK ROLLERS

10W216-342, 51U, 76U1-6073

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 118-1617 1
Components of Group
Roller Shell (SF) 1 9G-8027 1
Bushing Assembly 2 2P-8048
2
Bearing 1 8P-5197
Shaft 1 116-6702 3
End Collar 2 7G-0418 4
Ring (Lock) 2 5M-4443
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Bushing O-Ring 2 2H-3928
Seal -- Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt 4 1D-4608
Washer 4 5H-1504
1 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079,
4 - Bolt 1D-4610, 4 - Washer 5P-8248.
4 If 7G-0419 shaft is used, use 1 - 7G-0418 and 1 - 7G-0417 end collar.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

189
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK ROLLERS

10W1-215

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 118-1614 1
Components of Group
Roller Shell (SF) 1 6Y-2902 1
Bushing Assembly 2 2P-8048
2
Bearing 1 8P-5197
Shaft 1 116-6702 3
End Collar 2 5M-4436 4
Ring (Lock) 2 5M-4443
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 2 2 8H-2262
Seal -- Bushing O-Ring 2 2H-3928
Seal -- Shaft O-Ring 2 5F-8000
Stopper 1 7G-4332
Plug 1 6Y-0473
5
Mounting Hardware
Bolt 4 1A-8537
Washer 4 2S-0736
1 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078,
4 - Bolt 1D-4585, 4 - Washer 2S-0736.
4 If 5M-4448 shaft is used, use 1 - 5M-4436 and 1 - 5M-4435 end collar.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

225SA, FB227, 229, 231 TRACK GUIDING GUARDS (SEGMENTED)

1AG, 1GF, 1NK, 51U, 5WJ, 76U

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 4E-2887
Bolt 4 1A-8063
Spacer 4 4F-6568
Bolt 12 7X-0403
Washer 12 7X-0529

190
 Excavators/Front Shovels
225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK ROLLER GUARDS

FULL LENGTH
10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 6W-1029
Guard Assembly 2 6W-1030
Guard Assembly 2 6W-1031
Guard Assembly 2 6W-1032
Tube 14 8V-9129
Bolt 14 6M-2001
Nut 14 2J-3507
Bolt 40 8S-9093
Washer 68 7X-0529

191
 Excavators/Front Shovels
235

235 TRACK
SHORT
1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC
8.50" (215.9 mm) PITCH -- 7/8" BOLT

FORMER SEALED
SEALED PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 49 Section 2 -1 8E-8643
Components of Link Assembly
Track Links
RH Regular 49 7T-9823 130-5333
LH Regular 49 7T-9824 130-5334
Other Components
Pin 48 8E-4272 8E-4272
Master Pin 1 8E-4273 8E-4273
Bushing 48 1M-3669 1M-3669
Master Bushing 1 1M-3670 1M-3670
Seal (Spring Washer) 196 8M-6239 8M-6239
Spacer 2 8M-6238 8M-6238
2
Track Hardware
Bolt 196 7H-3599 5P-4028
Nut 196 7T-9825 7T-9825
1 Upgrade to 49 Section 8E-8643 Link Assembly.
2 Not part of link assembly; required to assemble track group.

192
 Excavators/Front Shovels
235

235 TRACK
LONG
1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC
8.50" (215.9 mm) PITCH -- 7/8" BOLT

FORMER SEALED
SEALED PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 53 Section 2 -1 8E-8644
Components of Link Assembly
Track Links
RH Regular 53 7T-9823 130-5333
LH Regular 53 7T-9824 130-5334
Other Components
Pin 52 8E-4272 8E-4272
Master Pin 1 8E-4273 8E-4273
Bushing 52 1M-3669 1M-3669
Master Bushing 1 1M-3670 1M-3670
Seal (Spring Washer) 212 8M-6239 8M-6239
Spacer 2 8M-6238 8M-6238
2
Track Hardware
Bolt 212 7H-3599 5P-4028
Nut 212 7T-9825 7T-9825
1 Upgrade to 53 Section 8E-8644 Link Assembly.
2 Not part of link assembly; required to assemble track group.

193
 Excavators/Front Shovels
235

235 TRACK
HYBRID LINKS
32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC
8.50" (215.9 mm) PITCH -- 3/4" BOLT

QUANTITY PART NUMBER

Link Assembly -- 49 Section 2 246-5810 1
Components of Link Assembly
Track Links
RH Regular 49 233-0385
LH Regular 49 233-0386
Other Components
Pin 48 8E-4272
Master Pin 1 8E-4273
Bushing 48 247-1475
Master Bushing 1 247-1476
Seal (Spring Washer) 196 8M-6239
Spacer 2 8M-6238
2
Track Hardware
Bolt 196 7H-3598
Nut 196 1S-1860
1 If installing new track replacement sprocket rim, use 248-2041 sprocket rim.
2 Not part of link assembly; required to assemble track group

194
 Excavators/Front Shovels
235

235 TRACK
(49 & 53 SECTION): 1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC
8.50" (215.9 mm) PITCH -- 3/4" BOLT

SEALED
PART NUMBER 49 SECTION 53 SECTION
1
Link Assembly -- (Quantity 2) 8E-4275 -- 2
Components of Link Assembly
Track Links
RH Regular 8S-2589 49 53
LH Regular 8S-2590 49 53
Other Components
Pin 8E-4272 48 52
Master Pin 8E-4273 1 1
Bushing 1M-3669 48 52
Master Bushing 1M-3670 1 1
Seal (Spring Washer) 8M-6239 196 212
Spacer 8M-6238 2 2
3
Track Hardware
Bolt 7H-3598 196 212
Nut 1S-1860 196 212
1 Canceled replaced by 246-5810 link assembly. If installing new track replacement sprocket rim, use new 248-2041 sprocket rim. For Sealed &
Lubricated Track, order 49 Section (239-6883) Link Assembly; requires 30" double grouser master shoe (8E-4431). For application restrictions,
refer to IRM UC86-41.
2 Order 246-5810 link assembly and add 4 sections. If installing new track replacement sprocket rim, use new 248-2041 sprocket rim.
3 Not part of link assembly; required to assemble track group.

195
 Excavators/Front Shovels
235

235 TRACK
32K1-1300, 64R1-595
8.00" (203.2 mm) PITCH -- 3/4" BOLT

SEALED
PART
NUMBER 47 SECTION 54 SECTION
1
Link Assembly -- (Quantity 2) 8E-4713 8E-4714 2
Components of Link Assembly
Track Links
RH Master 6P-6129 1 1
LH Master 6P-6130 1 1
RH Regular 3P-1112 46 46
LH Regular 3P-1113 46 46
Other Components
Pin 4M-5989 46 46
Master Pin 8E-0855 1 1
Bushing 4M-5991 46 46
Master Bushing 4M-5992 1 1
Seal (Spring Washer) 8M-7231 216 216
Spacer 8M-7290 2 2
3
Track Hardware
Bolt 1S-1859 216 216
Nut 1S-1860 216 216
1 Service replaced by 238-9956 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number 9M-3818)
sprocket, or new (new rim part number 246-5228) sprocket. For Sealed & Lubricated Track, order a 41 section 236-9866 Link Assembly and add
appropriate number of sections.
2 Service replaced by 238-9958 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number 9M-3818)
sprocket, or new (new rim part number 246-5228) sprocket.For Sealed & Lubricated Track, order a 41 section 236-9866 Link Assembly and add
appropriate number of sections.
3 Not part of link assembly; required to assemble track group.

235 TRACK SHOES

8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTH PART NUMBER

Moderate Service 28.0" (710 mm) 6Y-2192
Double Grouser 18.0" (460 mm) 8E-4428
Double Grouser 24.0" (610 mm) 8E-4427
Double Grouser 30.0" (760 mm) 8E-4426
Triple Grouser 29.5" (750 mm) 9W-6483
Triple Grouser 36.0" (915 mm) 9W-6484

196
 Excavators/Front Shovels
235

235 TRACK SHOES

8.50" (215.9 mm) PITCH -- 3/4" BOLT

TYPE WIDTH PART NUMBER

Double Grouser 18.0" (460 mm) 8E-4434
Double Grouser 24.0" (610 mm) 8E-4430
Double Grouser 30.0" (760 mm) 8E-4429
Triple Grouser 30.0" (760 mm) 3N-0837
Triple Grouser 36.0" (915 mm) 3N-6815

235 TRACK SHOES

8.00" (203.2 mm) PITCH -- 3/4" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 28.0" (710 mm) 9K-3565
Triple Grouser 32.0" (810 mm) 1V-0557
Triple Grouser 36.0" (915 mm) 9K-3568
Extreme Service (Clipped Grouser) 28.0" (710 mm) 6Y-6407

235 SPROCKETS
1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC
8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (24 Teeth) (Not for use with hybrid links) 1 3V-4527
Rim (24 Teeth) 1 248-2041

235 SPROCKETS
32K1-1300, 64R1-595
8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (23 Teeth) (Not for use with hybrid links) 1 8K-2743
Rim (23 Teeth) 1 246-5228

197
 Excavators/Front Shovels
235

235 IDLERS
1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 4E-8500
Components of Group
Idler Assembly 1 115-0605
Bushing Assembly 2 117-3068
1
Bearing 2 8P-6651
Shaft 1 8E-7232
Bearing Block 2 4E-8505
Seal -- Duo-Cone Group 2 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 1H-5728
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Pin 2 5M-5000
Bolt 2 7X-0313
Washer 2 7X-0563
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group; quantity shown is quantity per assembly

198
 Excavators/Front Shovels
235

235 IDLERS
32K944, 32K1024-1300

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 8E-6135
Bushing Assembly 2 3P-8432
1
Bearing 2 8P-6651
Shaft 1 2V-8627
Bearing Block 2 9C-4224
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-6711
Seal -- Plug 1 1S-8947
Bolt 12 9B-7237
Washer 12 8T-4896
Plug 1 2P-0347
Pin 2 5M-5000
Bolt 2 7X-0313
Washer 2 7X-0563
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group; quantity shown is quantity per assembly

199
 Excavators/Front Shovels
235

235 IDLERS
32K1-943, 32K945-1023, 64R1-595

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 5M-5009
Bushing Assembly 2 3P-1900
1
Bearing 2 8P-5197
Shaft 1 5M-5005
Bearing Block 2 2V-1221
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Bushing O-Ring 2 1H-6227
Seal -- Shaft O-Ring 2 5F-8000
Seal -- Plug 1 1S-8947
Bolt 12 0S-1588
Washer 12 3B-4506
Plug 1 2P-0347
Pin 2 5M-5000
Bolt 2 7X-0313
Washer 2 7X-0563
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding assembly or group; quantity shown is quantity per assembly

200
 Excavators/Front Shovels
235

235 CARRIER ROLLERS

1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC

(PER MACHINE) QUANTITY PART NUMBER

Group 4 1P-8717
Components of Group
Roller Shell 1 1P-8716
Shaft 1 1P-8715
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 7H-4574
Cover 1 5M-2043
Collar Assembly 1 7H-4571
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-8720
Special Application Groups
Group (Steel Mill) 4 2P-3514
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
Toric Ring 1 2 9M-9730
Seal--Cover (Steel Mill) 1 2P-3538
Seal--Shaft (Steel Mill) 1 1S-2174
Group (Arctic) 4 255-8882
Seal -- Duo-Cone Group (Arctic) 1 171-5882
Toric Ring 1 2 162-2166
1 Component of preceding group; quantity shown is the quantity per group.

201
 Excavators/Front Shovels
235

235 CARRIER ROLLERS

32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBER

Group 4 3T-3206
Components of Group
Roller Shell 1 9S-8320
Shaft 1 3T-3207
Cup 2 9S-3581
Cone 2 9S-3582
Ring 1 1M-7914
Cover 1 5M-2043
Collar Assembly 1 9S-3567
Plug 1 2P-0347
Bolt 3 0S-1594
Plate 1 8P-6188
Bolt 2 5K-9107
Seal -- Duo-Cone Group 1 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984
1
Toric Ring 2 9M-9730
1 Component of preceding group; quantity shown is the quantity per group.

202
 Excavators/Front Shovels
235

235 TRACK ROLLERS

EXCAVATOR STYLE ROLLER
7/8" MOUNTING HARDWARE
1FD, 2PG, 3WG, 4DG, 4ED, 5AF, 64R2014-UP, 7WC302-UP, 83X665-UP, 8KJ, 8TJ, 9PC

HEAVY DUTY PART

(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) 18 8E-4579 -- 1
Components of Group
Roller Shell (SF) 1 8E-4580 9W-5582
Bearing 2 1 9W-3359 9W-9498
Shaft 1 9W-2210 3T-7392
3
End Collar 2 8E-5456 -
Retainer Assembly 2 - 9W-6632
Thrust Washer 4 1 - 8E-7510
4
Dowel 4 - 2H-1190
Bolt 12 - 0S-1595
Washer 12 - 5P-8245
Ring 2 - 6T-4871
Pin 2 9W-2212 -
Seal -- Duo-Cone Group (Symmetric) 2 9W-2201 --
Toric Ring 2 2 6H-1309 --
Seal -- Duo-Cone Group (Inverted) 2 -- 7T-0158
2
Toric Ring 1 -- 6P-8912
O-Ring 2 1 -- 6V-2701
Seal -- Shaft O-Ring 2 8F-6711 -
Seal -- Retainer 2 - 5F-3106
Stopper 1 - 7G-4332
Plug 1 9W-2146 6Y-0473
Special Application Seals
Seal -- Duo-Cone Group (Symmetric) (Steel Mill) 2 4S-8984 --
2
Toric Ring 2 9M-9730 --
Seal -- Duo-Cone Group (Inverted) (Steel Mill) 2 -- 7T-5133
Toric Ring 2 1 -- 7T-1094
O-Ring 2 1 -- 6V-2701
1 Use 8E-4579 Roller Group & 4 - 1D-4631 Bolts
2 Component of preceding assembly or group; quantity shown is per assembly or group.
3 Excavator Style Collar
4 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

203
 Excavators/Front Shovels
235

235 TRACK ROLLERS

HARD BORE ROLLER
7/8" MOUNTING HARDWARE
32K1301-UP, 64R596-2013, 7WC1-301, 81X, 83X1-664

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 18 118-1623
Components of Group
Roller Shell (SF) 1 4S-9049
Bushing Assembly 2 1P-8787
1
Bearing 1 8P-6651
Shaft 1 9S-4324 2
End Collar 2 9S-0312 3
Bolt 12 2P-3201
Ring 2 6H-2953
Seal -- Duo-Cone Group 2 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Bushing O-Ring 2 4H-9105
Seal -- Shaft O-Ring 2 8F-8882
Stopper 1 7G-4332
Plug 1 6Y-0473
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 1 2 9M-9730
1 Component of preceding assembly or group; quantity shown is per assembly or group.
2 Replaces former 9S-0313 shaft; requires 2 - 9S-0312 end collars.
3 If 9S-0313 shaft is used, use 1 - 9S-0311 and 1 - 9S-0312 end collar.

235 STANDARDIZED TRACK ROLLERS

5/8" Mounting Hardware
32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBER

1
Single Flange (SF) 16 288-0934
Single Flange (SF) (Arctic) 16 1 288-0945
1
Single Flange (SF) (High Heat) 16 288-0947
2
Mounting Hardware
Cap 2 317-9078
Bolt (5/8") 4 1D-4585
Washer 2 2S-0736
1 20 Required for long undercariage.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

204
 Excavators/Front Shovels
235

235 TRACK ROLLERS

5/8" MOUNTING HARDWARE
32K1-1300, 64R1-595

HEAVY DUTY PART

(PER MACHINE) QUANTITY PART NUMBER NUMBER
Single Flange (SF) 16 1 118-1614 2 122-0216 3
Components of Group
Roller Shell (SF) 1 6Y-2902 2 9G-8027 2
Bushing Assembly 2 2P-8048 2P-8048
4
Bearing 1 8P-5197 8P-5197
Shaft 1 116-6702 5 116-6702 5
End Collar 2 5M-4436 6 5M-4436 6
Ring 2 5M-4443 5M-4443
Bolt 12 2P-3201 1A-2029
Washer 12 -- 5M-2894
Seal -- Duo-Cone Group 2 6Y-0925 1M-8747
4
Toric Ring 2 8H-2262 8H-2262
Seal -- Bushing O-Ring 2 2H-3928 2H-3928
Seal -- Shaft O-Ring 2 5F-8000 5F-8000
Stopper 1 7G-4332 7G-4332
Plug 1 6Y-0473 6Y-0473
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984
Toric Ring 4 2 9M-9730 9M-9730
1 20 required for long undercarriage.
2 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
3 Increased Bore Hardness. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.
4 Component of preceding assembly or group; quantity shown is per assembly or group.
5 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078,
4 - Bolt 1D-4585, 4 - Washer 2S-0736.
6 If 5M-4448 shaft is used, use 1 - 5M-4436 and 1 - 5M-4435 end collar.

235 TRACK GUIDING GUARDS (SEGMENTED)

1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 6W-3504
Bolt 8 1D-4635
Washer 8 7X-0529
Strip 4 3V-5055
Bolt 16 0S-1592
Washer 16 7X-0513

205
Excavators/Front Shovels
235

235 TRACK GUIDING GUARDS (SEGMENTED)

32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 4E-2887
Bolt 4 1A-8063
Bolt 12 7X-0403
Washer 12 7X-0529
Spacer 4 4F-6568

235 TRACK ROLLER GUARDS

FULL LENGTH, SHORT UNDERCARRIAGE
1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 6W-3502
Guard Assembly 2 6W-3503
Tube 16 3V-4812
Bolt 16 6M-2001
Nut 16 2J-3507
Bolt 32 9S-1363
Washer 16 8T-5361
Spacer 32 3V-5305

235 TRACK ROLLER GUARDS

FULL LENGTH, SHORT UNDERCARRIAGE
32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 6W-1029
Guard Assembly 2 6W-1030
Guard Assembly 2 6W-1031
Guard Assembly 2 6W-1032
Tube 14 8V-9129
Bolt 14 6M-2001
Nut 14 2J-3507
Bolt 40 8S-9093
Washer 68 7X-0529

206
 Excavators/Front Shovels
235

235 TRACK ROLLER GUARDS

FULL LENGTH, LONG UNDERCARRIAGE
32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 2V-1703
Guard Assembly 2 2V-1704
Tube 18 8V-9129
Bolt 18 6M-2001
Nut 18 2J-3507
Bolt 48 8S-9093
Washer 84 3K-5234

235 TRACK ROLLER GUARDS

FULL LENGTH, LONG UNDERCARRIAGE
8KJ

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 9U-0371
Guard Assembly 2 9U-0375
Tube 18 3V-4812
Bolt 18 6M-2001
Nut 18 2J-3507
Bolt 36 9S-1363
Washer 18 8T-5361
Spacer 36 3V-5305

207
 Excavators/Front Shovels
245

245 TRACK
1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP
10.25" (260.4 mm) PITCH -- 1" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 45 Section 2 8E-7857
Components of Link Assembly
Track Links
RH Regular 45 8E-4055
LH Regular 45 8E-4056
Other Components
Pin 44 8E-7855
Master Pin 1 8E-7856
Bushing 44 9G-6159
Master Bushing 1 9G-6161
Seal (Spring Washer) 180 1S-4446
Spacer 2 1S-4445
1
Track Hardware
Bolt 180 3T-6308
Nut 180 1S-6421
1 Not part of link assembly; required to assemble track group.

245 TRACK
82X1-572, 84X1-597, 94L1-465, 95V1-989
9.00" (228.6 mm) PITCH -- 1" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 51 Section 2 8K-4753
Components of Link Assembly
Track Links
RH Regular 51 8K-4754
LH Regular 51 8K-4756
Other Components
Pin 50 1M-1455
Master Pin 1 9G-7962
Bushing 50 8M-2619
Master Bushing 1 5M-2037
Seal (Spring Washer) 204 8M-2620
Spacer 2 8M-2621
1
Track Hardware
Bolt 204 2M-5657
Nut 204 2V-0250
Special Group
Pin and Bushing Group (41 Section, Common with D8 Pin & Bushing GP) 1 2P-6026
1 Not part of link assembly; required to assemble track group.

208
 Excavators/Front Shovels
245

245 TRACK SHOES

10.25" (260.4 mm) PITCH -- 1" BOLT

TYPE WIDTH PART NUMBER

Extreme Service 24.0" (610 mm) 3T-8491
Double Grouser 24.0" (610 mm) 9G-7109
Double Grouser 30.0" (760 mm) 9G-7111
Double Grouser 36.0" (915 mm) 9G-7113

245 TRACK SHOES

9.00" (228.6 mm) PITCH -- 1" BOLT

TYPE WIDTH PART NUMBER

Double Grouser 24.0" (610 mm) 2V-1687
Double Grouser 32.0" (810 mm) 8K-1390
Double Grouser 36.0" (915 mm) 8K-1392

245 SPROCKETS
1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP
10.25" (260.4 mm) PITCH -- 1" BOLT

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (22 Teeth) 1 7V-0753
Rim (22 Teeth) 1 7T-1310

245 SPROCKETS
82X1-572, 84X1-597, 94L1-465, 95V1-989
9.00" (228.6 mm) PITCH -- 1" BOLT

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (25 Teeth) 1 8K-4054
Rim (25 Teeth) 1 2M-8810

209
 Excavators/Front Shovels
245

245 IDLERS
1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP
10.25" (260.4 mm) PITCH

HEAVY DUTY PART

(PER MACHINE) QUANTITY PART NUMBER NUMBER
Idler Group 2 6W-5557 -
Components of Group
Idler Assembly 1 7T-9264 1 106-0458 2
Bearing 3 2 9S-4540 9S-4540
4
Shaft 1 186-2836 186-2836 4
Bearing Block 2 4E-0275 4E-0275
Retainer 2 8P-5394 8P-5394
Thrust Washer 1 8E-7510 8E-7510
Seal -- Duo-Cone Group 2 6Y-0925 6Y-0925
5
Toric Ring 2 8H-2262 8H-2262
Seal -- Shaft O-Ring 2 8F-8882 8F-8882
Retainer O-Ring 2 5F-3106 5F-3106
Bolt 24 5P-5855 5P-5855
Washer 24 5P-8245 5P-8245
Stopper 1 9G-4872 9G-4872
Plug 1 6Y-0473 6Y-0473
Pin 2 1S-3513 1S-3513
Bolt 2 8T-9389 --
Washer 2 6F-7831 --
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984
Toric Ring 3 2 9M-9730 9M-9730
1 Fabricated Design
2 Cast Design
3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
4 With former shaft 138-4332 use 9G-5664 stopper.
5 Component of preceding assembly or group; quantity shown is quantity per assembly or group

210
 Excavators/Front Shovels
245

245 IDLERS
82X1-572, 84X1-597, 94L212-465, 95V411, 95V437-989
9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 3V-5376
Bearing 1 2 9S-4540
Shaft 1 186-2836 2
Bearing Block 2 4E-0275
Retainer 2 8P-5394
Thrust Washer 1 8E-7510
Seal -- Duo-Cone Group 2 6Y-0925
1
Toric Ring 2 8H-2262
Seal -- Shaft O-Ring 2 8F-8882
Retainer )-Ring 2 5F-3106
Bolt 24 0S-1587
Washer 24 8T-4223
Stopper 1 9G-4872
Plug 1 6Y-0473
Pin 2 1S-3513
Bolt 2 8T-9389
Washer 2 6F-7831
Special Application Seals
Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984
Toric Ring 1 2 9M-9730
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 With former shaft 138-4332 use 9G-5664 stopper.

211
 Excavators/Front Shovels
245

245 IDLERS
94L1-211, 95V1-410, 95V412-436
9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 8K-1427
Bushing Assembly 2 6P-2083
Shaft 1 9S-4324
Bearing Block 2 8K-1438
Seal -- Duo-Group 2 9W-2142
1
Toric Ring 2 8H-2265
Seal -- Bushing O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 1H-5728
Seal -- Plug 1 1S-8947
Bolt 12 0S-1585
Washer 12 3B-4508
Plug 1 2P-0347
Pin 2 1S-3513
Bolt 2 9S-1366
Washer 2 6F-7831
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 8S-5656
Toric Ring 2 2 8S-5653
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

212
 Excavators/Front Shovels
245

245 CARRIER ROLLERS

1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP
10.25" (260.4 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Group 6 9G-7034
Components of Group
Roller Shell 1 9G-7033
Shaft 1 8P-6255
Cup 2 7K-5448
Cone 2 7K-5449
Ring 1 9H-7759
Cover 1 5M-2043
Collar Assembly 1 9H-9414
Bolt 3 0S-1594
Plate 1 3T-6269
Bolt 2 6F-7030
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Shaft 1 1H-5728
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
1 Component of preceding assembly or group.

213
 Excavators/Front Shovels
245

245 CARRIER ROLLERS

82X1-572, 84X1-597, 94L1-465, 95V1-989
9.00" (228.6 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Group 6 8P-6256
Components of Group
Roller Shell 1 8P-6245
Shaft 1 8P-6255
Cup 2 7K-5448
Cone 2 7K-5449
Ring 1 9H-7759
Cover 1 5M-2043
Collar Assembly 1 9H-9414
Bolt 3 0S-1594
Plate 1 3T-6269
Bolt 2 6F-7030
Seal -- Duo-Cone Group 2 6Y-0925
Toric Ring 1 2 8H-2262
Seal -- Cover 1 2H-6338
Seal -- Shaft 1 1H-5728
Seal -- Plug 1 1S-8947
Plug 1 2P-0347
1 Component of preceding assembly or group.

214
 Excavators/Front Shovels
245

245 TRACK ROLLERS

1SJ, 4LK, 6MF, 7ZJ, 82X727-UP, 84X990-UP
10.25" (260.4 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 18 8E-0830
Components of Group
Roller Shell (SF) 1 8E-0829
1
Bushing Assembly 2 9W-6714
Shaft 1 9W-6715
End Collar 2 9W-4355
Pin 2 9W-6718
Seal -- Duo-Cone Group 2 9W-6717
1
Toric Ring 2 4K-0173
Seal -- Shaft O-Ring 2 2H-4145
Plug 1 9W-2146
Mounting Hardware 2
Bolt (1") 4 1D-4639
Washer 4 5P-8250
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

245 TRACK ROLLERS

82X1-726, 84X1-989, 94L, 95V
10.25" (260.4 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 18 8E-0831
Components of Group
Roller Shell (SF) 1 8E-0829
1
Bushing Assembly 2 9W-6714
Shaft 1 9W-6715
End Collar 2 9W-6716
Pin 2 9W-6718
Seal -- Duo-Cone Group 2 9W-6717
1
Toric Ring 2 4K-0173
Seal -- Shaft O-Ring 2 2H-4145
Plug 1 9W-2146
2
Mounting Hardware
Bolt (7/8") 4 1D-4630
Washer 4 5P-8249
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

215
 Excavators/Front Shovels
245

245 TRACK ROLLERS

82X1-726, 84X1-989, 94L, 95V
9.00" (228.6 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 18 123-1186 1
Components of Group
Roller Shell (SF) 1 9G-7046
2
Bearing 2 9S-4540
Shaft 1 123-1191
End Collar 2 9S-4536
Retainer 2 8P-5394
Thrust Washer 2 8E-7510
Bolt 24 0S-1587
Washer 24 3H-7654
Ring 2 6H-6237
Seal -- Duo-Cone Group 2 6Y-0925
2
Toric Ring 2 8H-2262
Seal -- Retainer O-Ring 2 5F-3106
Seal -- Shaft O-Ring 2 8F-6711
Stopper 1 7G-4332
Plug 1 6Y-0473
3
Mounting Hardware
Bolt (7/8") 4 1D-4630
Washer 4 9H-1031
1 If mounting bolt loosening problems occur with this roller group, the preferred service replacement is 8E-0831.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

245 TRACK GUIDING GUARDS (SEGMENTED)

1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

(PER MACHINE) QUANTITY PART NUMBER

Front
Guard Assembly 2 -
Wear Strip 2 7V-0896
Wear Strip 2 7V-0897
Bolt 20 0S-1592
Washer 20 5P-8247
Rear
Guard Assembly 2 9C-3628
Wear Strip 4 9C-3416
Bolt 8 7X-0407
Washer 8 3V-5305
Bolt 20 0S-1589
Washer 20 8T-4122

216
 Excavators/Front Shovels
245

245 TRACK GUIDING GUARDS (SEGMENTED)

82X1-572, 84X1-597, 94L1-465, 95V1-989

(PER MACHINE) QUANTITY PART NUMBER

Front
Guard Assembly 2 1V-5433
Wear Strip 4 1V-5431
Bolt 20 0S-1592
Washer 20 3B-4510
Rear
Guard Assembly 2 1V-5433
Wear Strip 4 1V-5431
Bolt 8 1D-4637
Washer 8 3P-6600
Bolt 20 0S-1592
Washer 20 3B-4510

245 TRACK ROLLER GUARDS

FULL LENGTH
1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 4 7V-0820
Guard Assembly 4 7V-0821

245 TRACK ROLLER GUARDS

FULL LENGTH
82X1-572, 84X1-597, 94L1-465, 95V1-989

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 3V-5284
Guard Assembly 2 3V-5289

217
 Excavators/Front Shovels
E70B, E70

E70B, E70 TRACK 1

3BG1-UP, 3CG1-UP, 5TG1-UP, 6AK1-UP, 7YF1-UP
5.31" (135.0 mm) PITCH -- 1/2" BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 42 Section 2 102-8077
Components of Link Assembly
Track Links
RH Master 1 096-2142
LH Master 1 096-2143
RH Regular 41 093-1969
LH Regular 41 093-1970
Other Components
Pin 41 093-0515
Master Pin 1 093-0517
Bushing 41 102-8107
Master Bushing 1 102-8108
Spacer 2 093-0036
Cotter Pin 1 096-7033
2
Track Hardware
Bolt 168 102-8072
Nut 168 102-8073
1 Adaptable to MS70-8 machines
2 Not part of link assembly; required to assemble track group.

E70B, E70 TRACK SHOES 1

5.31" (135.0 mm) PITCH -- 1/2" BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 17.7" (450 mm) 1R-9507
Triple Grouser 23.6" (600 mm) 093-1935
Self-Cleaning 23.6" (600 mm) 085-6273
Flat 17.7" (450 mm) 096-0233
1 Adaptable to MS70-8 machines.

E70B SPROCKET
5TG00660- UP, 6AK, 7YF

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim 1 096-2144
Bolt 12 8C-3425

218
 Excavators/Front Shovels
E70B, E70

E70B SPROCKET
5TG 1 - 00659

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim 1 1R-5440
Bolt 12 8C-3425

E70 SPROCKETS 1
3BG, 3CG

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim 1 096-2144
Bolt 12 167-4339
Washer 12 095-0818
1 Adaptable to MS70-8 machines

E70B, E70 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly (Includes components below) 1 1R-8938
Other Components
Bushing Assembly 2 093-1839
Shaft 1 093-1701
Bearing Block 2 1R-8939
Seal -- Duo-Cone Group 2 093-1415
Seal -- Shaft O-Ring 2 095-1600
1 Adaptable to MS70-8 machines

E70B CARRIER ROLLERS 1

5TG, 6AK, 7YF

(PER MACHINE) QUANTITY PART NUMBER

Group 2 -- 2
Components of Group
Roller Shell - -3
Bushing 2 099-6461
Seal -- Duo-Cone Group 1 099-6463
Seal -- Cover 1 095-1541
Seal -- Shaft O-Ring 1 095-1658
1 Adaptable to MS70-8 machines
2 Use 136-2393 or 102-8076 Carrier Roller.
3 Roller Shell not serviced.

219
 Excavators/Front Shovels
E70B, E70

E70 CARRIER ROLLERS 1

3BG, 3CG

(PER MACHINE) QUANTITY PART NUMBER

Group 2 093-4333
Components of Group
Roller Shell - -2
Bushing 2 093-2949
Shaft 1 096-6771
Ring 1 6V-5200
Seal -- Duo-Cone Group 1 093-1410
Seal -- Cover 1 095-1663
Seal -- Shaft O-Ring 1 095-1658
1 Adaptable to MS70-8 machines
2 Roller Shell not serviced.

E70B TRACK ROLLERS

5TG1-UP, 6AK1-UP, 7YF1-UP

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 10 --
Components of Group
Roller Shell (SF) - -1
Bearing 2 5I-6274
Shaft 1 099-6469
Seal -- Shaft O-Ring 2 095-1659
Plug 1 095-0966
2
Mounting Hardware
Bolt 4 8T-4648
Washer 4 085-5519
1 Roller shell not serviced.
2 These components are not included in the roller

220
 Excavators/Front Shovels
E70B, E70

E70 TRACK ROLLERS

3BG1-UP, 3CG1-UP

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 10 093-2027
Components of Group
Roller Shell (SF) - -1
Bushing 2 093-1846
Shaft 1 093-5459
End Collar 2 093-4324
Seal -- Duo-Cone Group 2 093-1414
Seal -- Shaft O-Ring 2 095-1533
Plug 1 095-0966
2
Mounting Hardware
Bolt 4 099-4329
Washer 4 7X-0622
1 Roller shell not serviced.
2 These components are not included in the roller

221
 Excavators/Front Shovels
E120B, E120, E110B, E110

E120B, E120 TRACK 1

1LF1-UP, 1MF1-UP, 4XK1-UP, 6JF1-UP, 7NF1-UP
6.75" (171.5 mm) PITCH -- 16 mm BOLT

SEALED
QUANTITY PART NUMBER
Link Assembly -- 43 Section 2 4I-7480
Components of Link Assembly
Track Links
RH Master 1 4I-7477
LH Master 1 4I-7478
RH Regular 42 4I-7475
LH Regular 42 4I-7476
Other Components
Pin 42 5I-6140
Master Pin 1 099-0653
Cotter Pin 1 095-0863
Bushing 42 6I-6446
Master Bushing 1 093-1887
Seal (Resin) 84 4I-7473
Spacer 2 093-0037
2
Track Hardware
Bolt 172 4I-7538
3
Bolt 86 093-0261
Bolt 3 86 093-0259
Nut 172 5I-6125
1 Adaptable to MS120-8 machines.
2 Not part of link assembly; required to assemble track group.
3 Required for Self-Cleaning shoes.

222
 Excavators/Front Shovels
E120B, E120, E110B, E110

E110, E110B TRACK 1

E110 (39 SECTION): 1MJ1-UP, 3FG1-UP, 3GG1-UP
E110B (41 SECTION): 5GK1-UP, 8MF1-UP, 9HF1-UP
6.75" (171.5 mm) PITCH -- 16 mm BOLT

SEALED
PART
NUMBER 39 SECTION 41 SECTION
2
Link Assembly -- (Quantity 2) -- 4I-7479
Components of Link Assembly
Track Links
RH Master 4I-7477 1 1
LH Master 4I-7478 1 1
RH Regular 4I-7475 38 40
LH Regular 4I-7476 38 40
Other Components
Pin 5I-6140 38 40
Master Pin 099-0653 1 1
Cotter Pin 095-0863 1 1
Bushing 6I-6446 38 40
Master Bushing 093-1887 1 1
Seal (Resin) 4I-7473 76 80
Spacer 093-0037 2 2
3
Track Hardware
Bolt 4I-7538 156 164
Bolt 4 093-0261 78 82
4
Bolt 093-0259 78 82
Nut 5I-6125 156 164
1 Adaptable to MS110-8 machines.
2 Order 4I-7479 link assembly and remove 2 sections.
3 Not part of link assembly; required to assemble track group.
4 Required for Self-Cleaning shoes.

E120B, E120, E110B, E110 TRACK SHOES 1

6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 19.7" (500 mm) 1R-6008
Triple Grouser 23.6" (600 mm) 1R-6009
Triple Grouser 27.6" (700 mm) 1R-6010
Triple Grouser 29.5" (750 mm) 1R-6011
Self-Cleaning 30.3" (770 mm) 096-0231
Flat 19.7" (500 mm) 096-0240
1 Adaptable to MS120-8 and MS110-8 machines.

223
 Excavators/Front Shovels
E120B, E120, E110B, E110

E120B SPROCKETS 1
6JF, 7NF, 4XK

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 099-0219
Bolt 15 6V-8201
1 Adaptable to MS120-8 machines.

E110B SPROCKETS 1
8MF, 9HF, 5GK

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 -- 2
Bolt 15 8T-7338
1 Adaptable to MS110-8 machines.
2 099-5350 Sprocket Assembly serviced by 4I7472 Sprocket Rim.

E120, E110 SPROCKETS 1

1MF, 1MJ, 3FG102-UP, 3GG4909-UP

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 099-3220
Bolt 16 6V-5686
Washer 16 9X-8257
1 Adaptable to MS120-8 and MS110-8 machines.

E120, E110 SPROCKETS 1

1LF, 3FG1-101, 3GG1-4908

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 096-1479
Bolt 15 6V-5686
Washer 15 9X-8257
1 Adaptable to MS120-8 and MS110-8 machines.

224
 Excavators/Front Shovels
E120B, E120, E110B, E110

E120B, E110B IDLERS 1

6JF, 7NF, 4XK, 8MF, 9HF, 5GK

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 --
Bushing Assembly 2 099-0157
Bearing Block 2 099-0156
Seal -- Duo-Cone Group 2 099-0159
Seal -- Shaft O-Ring 2 095-1662
1 Adaptable to MS120-8 and MS110-8 machines.

E120, E110 IDLERS 1

1LF, 1MF, 3FG, 3GG, 1MJ

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 --
Bushing Assembly 2 093-1844
Shaft 1 093-1697
Bearing Block 2 093-7788
Seal -- Duo-Cone Group 2 095-7100
Seal -- Shaft O-Ring 2 095-1545
1 Adaptable to MS120-8 and MS110-8 machines.

E120B, E110B CARRIER ROLLERS 1

6JF, 7NF, 4XK, 8MF, 9HF, 5GK

(PER MACHINE) QUANTITY PART NUMBER

Components of Group
Group 2 --
Roller Shell - -2
Bushing 2 099-0185
Shaft 1 099-0182
Seal -- Duo-Cone Group 1 099-0183
Seal -- Cover 1 6V-7609
Seal -- Shaft O-Ring 1 099-0187
1 Adaptable to MS120-8 and MS110-8 machines.
2 Roller shell not serviced.

225
 Excavators/Front Shovels
E120B, E120, E110B, E110

E120, E110 CARRIER ROLLERS 1

1LF, 1MF, 3FG, 3GG, 1MJ

(PER MACHINE) QUANTITY PART NUMBER

Group 2 093-6946
Components of Group
Roller Shell - -2
Bushing 2 093-6951
Seal -- Duo-Cone Group 1 093-1411
Seal -- Cover 1 6V-7609
Seal -- Shaft O-Ring 1 6V-7660
1 Adaptable to MS120-8 and MS110-8 machines.
2 Roller shell not serviced.

E120B, E110B TRACK ROLLERS 1

6JF, 7NF, 4XK, 5GK, 8MF, 9HF

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 12 --
Components of Group
Roller Shell (SF) - -- 2
Bushing 2 099-0195
Seal -- Duo-Cone Group 2 099-0193
Seal -- Shaft O-Ring 2 095-1681
Plug 1 095-0966
3
Mounting Hardware
Bolt 4 7X-2555
Washer 4 9X-8257
1 Adaptable to MS 120-8 and MS110-8 machines.
2 Roller shell not serviced.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

226
 Excavators/Front Shovels
E120B, E120, E110B, E110

E120, E110 TRACK ROLLERS 1

1LF, 1MF, 3FG, 3GG, 1MJ

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 10 093-8747
Components of Group
Roller Shell (SF) - -2
Bushing 2 093-1844
Shaft 1 093-8749
End Collar 2 093-8748
Seal -- Duo-Cone Group 2 096-0655
Seal -- Shaft O-Ring 2 095-1545
Plug 1 095-0966
3
Mounting Hardware
Bolt 4 099-4347
Washer 4 9X-8257
1 Adaptable to MS120-8 and MS110-8 machines.
2 Roller shell not serviced.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

E120B, E110B TRACK GUIDING GUARDS 1

6JF, 7NF, 4XK, 8MF, 9HF, 5GK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 133-2554
Bolt 8 8T-4779
Washer 8 9X-8257
1 Adaptable to MS120-8 and MS110-8 machines.

227
 Excavators/Front Shovels
E140

E140 TRACK 1
1NF1-UP, 1PF1-UP
6.75" (171.5 mm) PITCH -- 16 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 44 Section 2 093-2015
Components of Link Assembly
Track Links
RH Master 1 093-1998
LH Master 1 093-1997
RH Regular 43 093-1978
LH Regular 43 093-1977
Other Components
Pin 43 093-0508
Master Pin 1 093-0520
Bushing 43 093-1888
Master Bushing 1 093-1889
Spacer 2 093-0041
Track Hardware
Bolt 176 096-1043
2
Bolt 88 093-0261
Bolt 2 88 093-0259
3
Bolt 176 096-8135
Nut 176 093-0319
1 Adaptable to MS140-8 machines.
2 Required for Self-Cleaning shoes.
3 Required for Flat shoes.

E140 TRACK SHOES 1

6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 093-1943
Triple Grouser 27.6" (700 mm) 093-1944
Triple Grouser 29.5" (750 mm) 093-1945
Self-Cleaning 30.3" (770 mm) 096-0231
Flat 19.7" (500 mm) 093-6963
Flat 29.5" (750 mm) 093-6962
1 Adaptable to MS140-8 machines.

228
 Excavators/Front Shovels
E140

E140 SPROCKETS 1

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 096-8047
Bolt 22 8T-0375
1 Adaptable to MS140-8 machines.

E140 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 093-6937
Bushing Assembly 2 093-1837
Shaft 1 093-1696
Bearing Block 2 093-6938
Seal -- Duo-Cone Group 2 096-0883
Seal -- Shaft O-Ring 2 8T-6346
1 Adaptable to MS140-8 machines.

E140 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 2 093-6946
Components of Group
Roller Shell 1 -- 2
Bushing 2 093-6951
Ring 1 8T-4241
Seal -- Duo-Cone Group 1 093-1411
Seal -- Cover 1 6V-7609
Seal -- Shaft O-Ring 1 6V-7660
1 Adaptable to MS140-8 machines.
2 Roller shell not serviced.

229
 Excavators/Front Shovels
E140

E140 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 093-8747
Components of Group
Roller Shell (SF) 1 -- 2
Bushing 2 093-1844
Shaft 1 093-8749
End Collar 2 093-8748
Seal -- Duo-Cone Group 2 096-0655
Seal -- Shaft O-Ring 2 095-1545
Plug 1 095-0966
3
Mounting Hardware
Bolt 4 096-7698
Washer 4 9X-8257
1 Adaptable to MS140-8 machines.
2 Roller shell not serviced.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

230
 Excavators/Front Shovels
E180, EL180

E180, EL180 TRACK 1

E180 (48 SECTION): 1RF1-UP, 2BF1-UP, 5HG1-UP
EL180 (52 SECTION): 4EF1-UP, 4HF1-UP
6.91" (175.5 mm) PITCH -- 18 mm BOLT

UNSEALED
PART
NUMBER 48 SECTION 52 SECTION
Link Assembly -- (Quantity 2) 093-1927 093-1929
Components of Link Assembly
Track Links
RH Master 093-2000 1 1
LH Master 093-1999 1 1
RH Regular 095-7130 47 51
LH Regular 093-1979 47 51
Other Components
Pin 093-0509 47 51
Master Pin 093-0521 1 1
Bushing 093-1890 47 51
Master Bushing 093-1891 1 1
Spacer 093-0042 2 2
2
Track Hardware
Bolt 093-0262 192 208
3
Bolt 093-0264 192 208
Nut 093-0320 192 208
1 Adaptable to MS180-8 and MS180LC-8 machines.
2 Not part of link assembly; required to assemble track group.
3 Required for Self-Cleaning shoes.

E180, EL180 TRACK SHOES 1

6.91" (175.5 mm) PITCH -- 18 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 093-1946
Triple Grouser 31.5" (800 mm) 093-1947
Flat 23.6" (600 mm) 093-9308
1 Adaptable to MS140-8 and MS180LC-8 machines.

E180, EL180 SPROCKETS 1

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 095-7412
Bolt 22 6V-5686
Washer 22 9X-8257
1 Adaptable to MS180-8 and MS180LC-8 machines.

231
 Excavators/Front Shovels
E180, EL180

E180, EL180 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 104-8170
Bushing Assembly 2 093-1845
Shaft 1 093-1693
Bearing Block 2 094-0548
Seal -- Duo-Cone Group 2 096-0883
Seal -- Shaft O-Ring 2 095-1549
1 Adaptable to MS180-8 and MS180LC-8 machines.

E180, EL180 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 4 096-5260
Components of Group
Roller Shell - -2
Bushing 2 094-0563
Shaft 1 094-6386
Ring 1 095-0928
Seal -- Duo-Cone Group 1 093-1413
Seal -- Cover 1 8T-5376
Seal -- Shaft O-Ring 1 095-1663
1 Adaptable to MS180-8 and MS180LC-8 machines.
2 Roller shell not serviced.

232
 Excavators/Front Shovels
E180, EL180

E180, EL180 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

2
Single Flange (SF) 14 095-7138
Components of Group
Roller Shell (SF) - -3
Bushing 2 093-1849
Shaft 1 094-1782
End Collar 2 094-1388
Seal -- Duo-Cone Group 2 095-7099
Seal -- Shaft O-Ring 2 6V-7658
Plug 1 095-0967
4
Mounting Hardware
Bolt 4 093-0259
Washer 4 9X-8257
1 Adaptable to MS180-8 and MS180LC-8 machines.
2 16 rollers required for long undercarriage.
3 Roller shell not serviced.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

E180, EL180 TRACK GUIDING GUARDS (SEGMENTED) 1

(PER MACHINE) QUANTITY PART NUMBER

Sprocket Assembly 2 096-2052
Bolt 8 099-2668
Washer 8 095-0819
1 Adaptable to MS180-8 and MS180LC-8 machines.

233
 Excavators/Front Shovels
E200B, EL200B

E200B, EL200B TRACK

E200B (45 SECTION): 4SG1-UP, 6KF1-UP, 6KG1-UP
EL200B (49 SECTION): 5EG1-UP, 7DF1-UP
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED
PART
NUMBER 45 SECTION 49 SECTION
1
Link Assembly (Quantity 2) -- -- 2
Components of Link Assembly
Track Links
RH Master 8E-8585 1 1
LH Master 8E-8586 1 1
RH Regular 9W-3137 44 48
LH Regular 9W-3138 44 48
Other Components
Pin 6Y-8186 44 48
Master Pin 188-3064 1 1
Cotter Pin 095-0863 1 1
Bushing 117-1371 44 48
Master Bushing 117-1372 1 1
Seal (Spring Washer) 5S-0709 180 196
Spacer 5S-0754 2 2
3
Track Hardware
Bolt 9W-3619 180 196
Nut 9W-3361 180 196
1 Upgrade to link assembly 194-1609.
2 Upgrade to link assembly 194-1608.
3 Not part of link assembly; required to assemble track group.

E200B, EL200B TRACK SHOES

7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 23.6" (600 mm) 6I-9453
Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351
Self-Cleaning 31.5" (800 mm) 8E-8835

E200B, EL200B SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 096-4327
Bolt 14 8T-6430

234
 Excavators/Front Shovels
E200B, EL200B

E200B, EL200B IDLERS

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 115-4926
Bushing Assembly 2 8E-4359
Shaft 1 099-1461
Bearing Block 2 099-1460
Seal -- Duo-Cone Group 2 9W-2201
1
Toric Ring 1 6H-1309
Seal -- Shaft O-Ring 2 6V-7658
1 Component of preceding group

E200B, EL200B CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 8E-5600 1
Components of Group
Roller Shell 1 -2
Shaft 1 8E-5601
Seal -- Cover 1 6V-7661
Seal -- Shaft O-Ring 1 096-4280
1 320B Carrier Roller
2 Roller shell not serviced.

E200B, EL200B TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 1 1R-8669
Components of Group
Roller Shell (SF) - -2
Bushing 2 8E-5599
Shaft 1 -- 3
End Collar 2 8E-5037
Seal -- Duo-Cone Group 2 9W-2142
Toric Ring 4 1 8H-2265
Seal -- Shaft O-Ring 2 095-1663
Plug 1 095-0967
5
Mounting Hardware
Bolt 4 7X-2564
1 16 rollers required for long undercarriage.
2 Roller shell not serviced.
3 099-1463 Shaft serviced by (1) 8E-5035 Shaft (1) 5G-2247 Stopper (1) 6Y-0473 Plug.
4 Component of preceding group.
5 These components are not included in the roller group; quantities shown are required to mount each roller.

235
 Excavators/Front Shovels
E240C, EL240C, E240B, EL240B, E240, EL240

EL240C, EL240B GREASE TRACK

WITH BIG BUSHING.
5WG1-UP, 6MG1-UP, 9PK1-UP
7.50" (190.5 mm) PITCH -- 20 mm

QUANTITY PART NUMBER

Link Assembly --50 Section 1 240-3056
Components of Link Assembly
Track Links
RH Master 1 8E-8585
LH Master 1 8E-8585
RH Regular 49 9W-3137
LH Regular 49 9W-3138
Other Components
Pin 49 6Y-8186
Master Pin 1 188-3064
Bushing 49 190-3523
Master Bushing 1 190-3524
Cotter 1 095-0863
Seal (Poly - W) 98 158-4380
Seal - Master (Poly W) 2 158-4381
1
Track Hardware
Bolt 200 9W-3619
Nut 200 9W-3361
1 Not part of link assembly; required to assemble track group.

236
 Excavators/Front Shovels
E240C, EL240C, E240B, EL240B, E240, EL240

E240C/B, EL240C/B TRACK 1

E240C/B (46 SECTION): 2RL1-UP, 8SF1-UP, 9PF1-UP
EL240C/B(50 SECTION): 5WG1-UP, 6MG1-UP, 9PK1-UP
7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALED PART
NUMBER 46 SECTION 50 SECTION
Link Assembly (Quantity 2) 087-8805 087-8806 2
Components of Link Assembly
Track Links
RH Master 8E-8585 1 1
LH Master 8E-8586 1 1
RH Regular 9W-3137 45 49
LH Regular 9W-3138 45 49
Other Components
Pin 6Y-8186 45 49
Master Pin 188-3064 1 1
Cotter Pin 095-0863 1 1
Bushing 117-1371 45 49
Master Bushing 117-1372 1 1
Seal (Spring Washer) 5S-0709 184 200
Spacer 5S-0754 2 2
3
Track Hardware
Bolt 9W-3619 184 200
Nut 9W-3361 184 200
1 Also adaptable to MS240LC-8 machines and parts replacement for early E240.
2 Canceled replaced by link assembly 240-3056.
3 Not part of link assembly; required to assemble track group.

237
 Excavators/Front Shovels
E240C, EL240C, E240B, EL240B, E240, EL240

E240 TRACK 1
1FG, 2HF
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER UNSEALED
UNSEALED PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 46 Section 2 -2 096-9956
Components of Link Assembly
Track Links
RH Master 1 093-2006 096-5253
LH Master 1 093-2005 096-5259
RH Regular 45 093-1981 096-5252
LH Regular 45 093-1980 096-5258
Other Components
Pin 45 093-0502 093-0502
Master Pin 1 093-0522 093-0522
Bushing 45 095-7119 096-5257
Master Bushing 1 095-7120 096-5256
Spacer 2 093-0043 093-0043
Track Hardware 3
Bolt 184 093-0266 093-0266
4
Bolt 184 096-0551 096-0551
Nut 184 093-0321 093-0321
1 Also adaptable to MS240LC-8 machines.
2 Upgrade to 096-9956 Link Assembly.
3 Not part of link assembly; required to assemble track group.
4 For use with self-cleaning track shoes.

238
 Excavators/Front Shovels
E240C, EL240C, E240B, EL240B, E240, EL240

EL240 TRACK 1
4JF, 4MF
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER UNSEALED
UNSEALED PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 50 Section 2 -2 096-5251
Components of Link Assembly
Track Links
RH Master 1 093-2006 096-5253
LH Master 1 093-2005 096-5259
RH Regular 49 093-1981 096-5252
LH Regular 49 093-1980 096-5258
Other Components
Pin 49 093-0502 093-0502
Master Pin 1 093-0522 093-0522
Bushing 49 095-7119 096-5257
Master Bushing 1 095-7120 096-5256
Spacer 2 093-0043 093-0043
Track Hardware 3
Bolt 200 093-0266 093-0266
4
Bolt 200 096-0551 096-0551
Nut 200 093-0321 093-0321
1 Also adaptable to MS240LC-8 machines.
2 Upgrade to 096-5251 Link Assembly.
3 Not part of link assembly; required to assemble track group.
4 For use with self-cleaning track shoes.

E240C/B, EL240C/B, TRACK SHOES 1

2RL, 5WG, 6MG, 8SF, 9PF, 9PK
7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 23.6" (600 mm) 6I-9453
Triple Grouser (Center Punched Slots) 27.5" (700 mm) 6I-9454
Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351
Self-Cleaning 31.5" (800 mm) 8E-8835
1 Also adaptable to MS240LC-8 and MS240-8 machines.

E240, EL240 TRACK SHOES 1

1FG, 2HF, 4JF, 4MF
7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 31.5" (800 mm) 095-7123
1 Also adaptable to MS240-8 and MS240LC-8 machines.

239
 Excavators/Front Shovels
E240C, EL240C, E240B, EL240B, E240, EL240

E240C/B, EL240C/B, E240, EL240 SPROCKETS 1

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 095-9779
Bolt 14 6V-3532
Washer 14 085-9311
1 Also adaptable to MS240-8 and MS240LC-8 machines.

E240C/B, EL240C/B, E240, EL240 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 094-1384
Bushing Assembly 2 093-1848
Shaft 1 093-1693
Bearing Block 2 094-0548
Seal -- Duo-Cone Group 2 096-0883
Seal -- Shaft O-Ring 2 095-1549
1 Also adaptable to MS240-8 and MS240LC-8 machines.

E240C/B, EL240C/B, E240, EL240 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 4 096-5260
Components of Group
Roller Shell - -2
Bushing 2 094-0563
Shaft 1 094-6386
Ring 1 095-0928
Seal -- Duo-Cone Group 1 093-1413
Seal -- Cover 1 8T-5376
Seal -- Shaft O-Ring 1 095-1663
1 Also adaptable to MS240-8 and MS240LC-8 machines.
2 Roller shell not serviced.

240
 Excavators/Front Shovels
E240C, EL240C, E240B, EL240B, E240, EL240

E240C/B, EL240C/B, E240, EL240 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

2
Single Flange (SF) 14 095-7138
Double Flange (DF) - 093-9275
Components of Group
Roller Shell (SF) - -3
Roller Shell (DF) - -3
Bushing 2 093-1849
Shaft 1 094-1782
End Collar 2 094-1388
Seal -- Duo-Cone Group 2 095-7099
Seal -- Shaft O-Ring 2 6V-7658
Plug 1 095-0967
Mounting Hardware 4
Bolt 4 093-0259
Washer 4 9X-8257
1 Also adaptable to MS240-8 and MS240LC-8 machines.
2 16 rollers required for long undercarriage.
3 Roller shell not serviced.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

E240C/B, EL240C/B, E240, EL240 TRACK GUIDING GUARDS 1

1FG, 2HF
7.50" (190.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 096-2052
Bolt 8 099-2668
Washer 8 095-0819
1 Also adaptable to MS240-8 and MS240LC-8 machines.

241
 Excavators/Front Shovels
E300B, EL300B, E300, EL300

E300B, EL300B, EL300 TRACK 1

E300B (46 SECTION): 1WJ1-UP
EL300B, EL300 (50 SECTION): 1GK1-UP, 3FJ1-UP, 4NF (EARLY MODELS), 4SF (EARLY MODELS)
8.00" (203.2 mm) PITCH -- 20 mm BOLT

SEALED PART
NUMBER 46 SECTION 50 SECTION
Link Assembly (Quantity 2) 099-5998 099-2658
Components of Link Assembly
Track Links
RH Master 099-6008 1 1
LH Master 099-5999 1 1
RH Regular 096-0264 45 49
LH Regular 096-0263 45 49
Other Components
Pin 096-0244 45 49
Master Pin 099-5554 1 1
Cotter Pin 095-0867 1 1
Bushing 099-5996 45 49
Master Bushing 096-0094 1 1
Seal (Spring Washer) 8M-7231 184 200
Spacer 096-0241 2 2
2
Track Hardware
Bolt 093-0265 184 200
Nut 093-0321 184 200
1 Also adaptable to MS300LC-8 Machines (50 Section link assembly)
2 Not part of link assembly; required to assemble track group.

242
 Excavators/Front Shovels
E300B, EL300B, E300, EL300

E300 TRACK 1
1KG, 2CF
7.50" (190.5 mm) PITCH -- 20 mm BOLT

FORMER UNSEALED
UNSEALED PART
QUANTITY PART NUMBER NUMBER
Link Assembly -- 49 Section 2 -2 099-0046
Components of Link Assembly
Track Links
RH Master 1 093-2006 096-5253
LH Master 1 093-2005 096-5259
RH Regular 48 093-1981 096-5252
LH Regular 48 093-1980 096-5258
Other Components
Pin 48 093-0502 093-0502
Master Pin 1 093-0522 093-0522
Bushing 48 095-7119 096-5257
Master Bushing 1 095-7120 096-5256
Spacer 2 - 093-0043
Track Hardware 3
Bolt 196 093-0266 093-0266
Nut 196 093-0321 093-0321
1 Also adaptable to MS300LC-8 machines.
2 Upgrade to 099-0046 Link Assembly
3 Not part of link assembly; required to assemble track group.

E300B, EL300B, EL300 TRACK SHOES 1

1GK, 1WJ, 3FJ, 4NF, 4SF
8.00" (203.2 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 093-1951
Triple Grouser 31.5" (800 mm) 093-1952
Triple Grouser 35.4" (900 mm) 096-0257
1 Also adaptable to MS300LC-8 machines.

E300 TRACK SHOES 1

1KG, 2CF
7.50" (190.5 mm) PITCH -- 20 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 093-1949
Triple Grouser 31.5" (800 mm) 093-1950
Triple Grouser 35.4" (900 mm) 096-0256
1 Also adaptable to MS300LC-8 machines.

243
 Excavators/Front Shovels
E300B, EL300B, E300, EL300

E300B, EL300B, EL300 SPROCKETS 1

8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 099-4129
Bolt 16 6V-6788
Washer 16 8T-4123
1 Also adaptable to MS300LC-8 machines.

E300 SPROCKETS 1
7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 094-2576
Bolt 16 6V-6788
Washer 16 8T-4123
1 Also adaptable to MS300LC-8 machines.

E300B, EL300B, EL300 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 096-0253
Bushing Assembly 2 093-1843
Shaft 1 093-1694
Bearing Block 2 093-9871
Seal -- Duo-Cone Group 2 093-1418
Seal -- Shaft O-Ring 2 095-1551
1 Also adaptable to MS300-8 and MS300LC-8 machines.

E300 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 094-2491
Bushing Assembly 2 093-1843
Shaft 1 093-1694
Bearing Block 2 093-9871
Seal -- Duo-Cone Group 2 093-1418
Seal -- Shaft O-Ring 2 095-1551
1 Also adaptable to MS300-8 and MS300LC-8 machines.

244
 Excavators/Front Shovels
E300B, EL300B, E300, EL300

E300B, EL300B, EL300 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 4 096-0330
Components of Group
Roller Shell - -2
Bushing 2 094-0563
Shaft 1 096-0332
Seal -- Duo-Cone Group 1 093-1413
Seal -- Cover 1 8T-5376
Seal -- Shaft O-Ring 1 6V-7658
1 Also adaptable to MS300-8 and MS300LC-8 machines.
2 Roller shell not serviced.

E300 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 4 096-5260
Components of Group
Roller Shell - -2
Bushing 2 094-0563
Shaft 1 094-6386
Ring 1 095-0928
Seal -- Duo-Cone Group 1 093-1413
Seal -- Cover 1 8T-5376
Seal -- Shaft O-Ring 1 095-1663
1 Also adaptable to MS300-8 and MS300LC-8 machines.
2 Roller shell not serviced.

245
 Excavators/Front Shovels
E300B, EL300B, E300, EL300

E300B, EL300B, EL300 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 085-4973
Components of Group
Roller Shell (SF) - -2
Bushing 2 093-1841
Shaft 1 093-0329
End Collar 2 093-6391
Ring 2 093-1736
Seal -- Duo-Cone Group 2 096-0883
Seal -- Shaft O-Ring 2 6V-7609
Plug 1 095-0967
Mounting Hardware 3
Bolt 4 093-9886
Washer 4 099-7241
1 Also adaptable to MS300LC-8 machines.
2 Roller shell not serviced
3 These components are not included in the roller group; quantities shown are required to mount each roller.

E300 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 085-4972
Components of Group
2
Roller Shell (SF)
Bushing 2 093-1841
Shaft 1 094-6390
End Collar 2 094-6391
Seal -- Duo-Cone Group 2 096-0883
Seal -- Shaft O-Ring 2 095-1578
Plug 1 095-0967
3
Mounting Hardware
Bolt 4 093-9886
Washer 4 099-7241
1 Also adaptable to MS300LC-8 machines.
2 Roller shell not serviced
3 These components are not included in the roller group; quantities shown are required to mount each roller.

246
 Excavators/Front Shovels
E300B, EL300B, E300, EL300

E300B, EL300B, EL300 END GUIDING GUARDS 1

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 099-4150
Bolt 8 093-0245
Washer 8 095-0820
1 Also adaptable to MS300-8 and MS300LC-8 machines.

E300 END GUIDING GUARDS 1

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 099-7447
Bolt 8 093-0245
Washer 8 095-0820
1 Also adaptable to MS300-8 and MS300LC-8 machines.

247
 Excavators/Front Shovels
E450

E450 TRACK 1
3HG, 3JG
8.50" (215.9 mm) PITCH -- 22 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 50 Section 2 7I-9091
Components of Link Assembly
Track Links
RH Master 1 096-9945
LH Master 1 096-9947
RH Regular 49 096-9944
LH Regular 49 096-9946
Other Components
Pin 49 093-0510
Master Pin 1 093-0523
Cotter Pin 1 095-0867
Bushing 49 093-1892
Master Bushing 1 093-1893
Spacer 2 093-0044
2
Track Hardware
Bolt 200 093-0268
Nut 200 096-0586
1 Also adaptable to MS450-8 machines.
2 Not part of link assembly; required to assemble track group.

E450 TRACK SHOES 1

8.50" (215.9 mm) PITCH -- 22 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 099-0032
Triple Grouser 29.5" (750 mm) 1R-9832
Triple Grouser 35.4" (900 mm) 1R-9833
1 Also adaptable to MS450-8 machines.

E450 SPROCKETS 1

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 094-6133
Bolt 24 096-7011
Washer 24 6V-8237
1 Also adaptable to MS450-8 machines.

248
 Excavators/Front Shovels
E450

E450 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 094-6105
Bushing Assembly 2 093-1847
Shaft 1 093-1695
Bearing Block 2 094-3708
Seal -- Duo-Cone Group 2 093-1418
Seal -- Shaft O-Ring 2 095-1553
1 Also adaptable to MS450-8 machines.

E450 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 6 094-6114
Components of Group
Roller Shell - -2
Bushing 2 094-3729
Shaft 1 094-6115
Ring 1 095-8026
Seal -- Duo-Cone Group 1 093-1416
Seal -- Cover 1 095-1674
Seal -- Shaft O-Ring 1 094-3731
1 Also adaptable to MS450-8 machines.
2 Roller shell not serviced.

249
 Excavators/Front Shovels
E450

E450 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 086-3096
Components of Group
Roller Shell (SF) - -2
Bushing 2 093-1847
Shaft 1 094-6113
End Collar 2 094-6112
Seal -- Duo-Cone Group 2 093-1418
Seal -- Shaft O-Ring 2 8T-3338
Plug 1 095-0967
3
Mounting Hardware
Bolt 4 093-0233
Washer 4 093-0394
1 Also adaptable to MS450-8 machines.
2 Roller shell not serviced.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

E450 TRACK ROLLER GUARDS 1

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 099-0008
Guard Assembly 2 099-0009
1 Also adaptable to MS450-8 machines.

250
 Excavators/Front Shovels
E650

E650 TRACK 1
3KG, 3LG
9.00" (228.6 mm) PITCH -- 24 mm BOLT

UNSEALED
QUANTITY PART NUMBER
Link Assembly -- 50 Section 2 096-0260
Components of Link Assembly
Track Links
RH Master 1 093-2012
LH Master 1 093-2011
RH Regular 49 093-1985
LH Regular 49 093-1984
Other Components
Pin 49 093-0511
Master Pin 1 093-0524
Cotter Pin 1 094-4846
Bushing 49 093-1894
Master Bushing 1 093-1895
Spacer 2 093-0045
2
Track Hardware
Bolt 200 093-0271
Nut 200 093-0323
1 Also adaptable to MS650-8 machines.
2 Not part of link assembly; required to assemble track group.

E650 TRACK SHOES 1

9.00" (228.6 mm) PITCH -- 24 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 23.6" (600 mm) 1R-9834
Triple Grouser 29.5" (750 mm) 1R-9835
Triple Grouser 35.4" (900 mm) 1R-9836
1 Also adaptable to MS650-8 machines.

E650 SPROCKETS 1

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 096-0310
Bolt 27 8T-0375
Washer 27 3B-4516
1 Also adaptable to MS650-8 machines.

251
 Excavators/Front Shovels
E650

E650 IDLERS 1

(PER SIDE) QUANTITY PART NUMBER

Components of Group
Idler Assembly 1 096-0300
Roller Shell 2 096-0251
Bushing 1 093-1699
Shaft 2 095-7643
Seal -- Duo-Cone Group 2 093-1420
Seal -- Shaft O-Ring 2 095-1557
1 Also adaptable to MS650-8 machines.

E650 CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 6 094-4831
Components of Group
Roller Shell - -2
Bushing 2 096-0251
Shaft 1 096-0309
Seal -- Duo-Cone Group 1 093-1416
Seal -- Cover 1 095-1674
Seal -- Shaft O-Ring 1 096-0245
1 Also adaptable to MS650-8 machines.
2 Roller shell not serviced.

252
 Excavators/Front Shovels
E650

E650 TRACK ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 14 085-7456
Components of Group
Roller Shell (SF) - -2
Bushing 2 096-0251
Shaft 1 -- 3
End Collar 2 096-0305
Ring 2 099-5200
Seal -- Duo-Cone Group 2 093-1420
Seal -- Shaft O-Ring 2 095-1673
Plug 1 176-8618
Mounting Hardware 4
Bolt 4 094-4829
Washer 4 3P-3419
1 Also adaptable to MS650-8 machines.
2 Roller shell not serviced.
3 Shaft not serviced.
4 These components are not included in the roller group; quantities shown are required to mount each roller.

E650 TRACK ROLLER GUARDS 1

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly 2 099-7644
Guard Assembly 2 099-7646
1 Also adaptable to MS650-8 machines.

253
254
 Timberking
INDEX

Timberking
MODELS PAGE NO.

511, TK711.............................................................................................................. 256

521, 522, TK721, TK722, TK741.............................................................................261
532, 541, TK732...................................................................................................... 265
551, 552, TK751, TK752......................................................................................... 268

255
 Timberking
511, TK711

511, TK711 GREASE TRACK

51100001-UP, 10100249-UP
8.00" (203.2 mm) PITCH 20 mm BOLT

PART
QUANTITY NUMBER
Link Assembly -- 46 Section 2 261-1024
Track Links
RH Regular 46 261-1011
LH Regular 46 261-1012
Other Components
Pin 45 261-1013
Master Pin 1 261-1014
Bushing 45 261-1015
Master Bushing 1 261-1016
Seal Assembly (Rigid) 90 261-1021
Master Seal Assembly (Rigid) 2 261-1022
Thrust Ring 90 261-1017
Master Thrust Ring 2 261-1018
Track Hardware 1
Bolt 184 6Y-0846
Nut 184 9W-3361
1 Not part of link assembly; required to assemble track group.

256
 Timberking
511, TK711

TK711 GREASE TRACK

10100001-00248
7.50" (190.5 mm) PITCH 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 50 Section 2 206-1469
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 49 106-1625
LH Regular 49 106-1626
Other Components
Pin 50 206-1470
Bushing 50 106-1618
Seal Assembly (Rigid) 90 250-3988
Thrust Ring 88 152-8069
Track Hardware 1
Bolt 196 6V-1792
Nut 196 1S-1860
Master Bolt 2 106-1642
Master Bolt 2 107-0719
1 Not part of link assembly; required to assemble track group.

511, TK711 TRACK SHOES

8.00" (203.2 mm) PITCH - 20 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 6I-9854
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 152-8628
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 3Q-6993
Triple Grouser (Center Punched Shoes) 35.4" (900 mm) 6I-8651
Triple Grouser (Center Punched Shoes) (Tri) (RH) 35.4" (900 mm) 290-2269
Triple Grouser (Center Punched Shoes) (Tri) (LH) 35.4" (900 mm) 290-2270

TK711 TRACK SHOES

7.50" (190.5 mm) PITCH - 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service (Tapezoidal Opening) (Clip Grouser) 24.0" (610 mm) 207-4873 207-4874
Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 224-7269 224-7732
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 206-1479 206-1480
Triple Grouser (Heavy Duty Center Punched Slots) 35.4" (900 mm) 206-1476 206-1477

257
 Timberking
511, TK711

511, TK711 SPROCKETS

8.00" (203.2 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Rim (21 Tooth) 1 6Y-4898
Bolt 18 8T-6430

TK711 SPROCKETS
7.50" (190.5 mm) PITCH

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Rim (23 Tooth) 1 206-3065
Bolt 18 8T-6430

511, TK711 IDLERS

8.00" (203.2 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 115-3696
Components of Group
Idler Assembly 1 115-7471
Bearing 1 2 6Y-2272
Shaft 1 112-9951
Bearing Blocks 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft-O-Ring 2 8F-8882
Stopper 1 9G-5664
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

258
 Timberking
511, TK711

TK711 IDLERS
7.50" (190.5 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Group 2 115-3696
Components of Group
Idler Assembly 1 115-7471
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Blocks 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft-O-Ring 2 8F-8882
Stopper 1 9G-5664
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

511, TK711 CARRIER ROLLERS

8.00" (203.3 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (Star Design) 6 228-6404
1
Roller Group (SF) 1 206-1264
1
Roller Group (SF) (Circular Design) 6 206-1264
Mounting Hardware (For Both Designs) 2
Bolt 4 7X-2565
Washer 4 8T-4123
1 Refer to track roller table for component breakdown.
2 Not part of roller group, quantities shown are required to mount each roller group.

TK711 CARRIER ROLLERS

7.50" (190.5 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (Star Design) 6 228-6403
1
Roller Group (SF) 1 197-4161
Roller Group (SF) (Circular Design) 1 6 197-4161
2
Mounting Hardware (For Both Designs)
Bolt 4 7X-2565
Washer 4 8T-4123
1 Refer to track roller table for component breakdown.
2 Not part of roller group, quantities shown are required to mount each roller group.

259
 Timberking
511, TK711

511, TK711 TRACK ROLLERS

8.00" (203.2 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group 4 206-1264 1
Double Flange (DF) Roller Group 14 206-1263
Components of Group
Roller Shell (SF) 1 206-9257
Roller Shell (DF) 1 206-1262
Bushing 2 6Y-1782
Shaft 1 206-9260
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group (Symmetrical) 2 206-9212
Toric Ring 2 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 3
Bolt 4 7X-2565
Washer 4 8T-4123
1 Position next to idler and sprocket (front and rear position).
2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

TK711 TRACK ROLLERS

7.50" (190.5 mm) PITCH

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group 18 197-4161
Components of Group
Roller Shell (SF) 1 205-3594
1
Bearing 2 6I-9399
Shaft 1 200-6432
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group (Symmetrical) 2 206-9212
1
Toric Ring 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 7X-2565
Washer 4 8T-4123
1 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

260
 Timberking
521, 522, TK721, TK722, TK741

521, 522, TK721, TK722, TK741 GREASE TRACK

ONE PIECE MASTER LINKS
521, 52100001-UP; 522, 52200001-UP; TK721, 10200352-UP; TK722, 10300453-UP; TK741, 20200229-UP
8.00" (203.3 mm)PITCH - 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 49 Section 2 269-7858
Components of Link Assembly
Track Links
RH Master (Full) 1 266-7271
LH Master (Full) 1 266-7272
RH Regular 48 8E-7405
LH Regular 48 8E-7406
Other Components
Pin 48 198-1125
Master Pin 1 265-5109
Bushing 48 8E-7222
Master Bushing 1 269-4027
Seal Assembly (Rigid) 96 207-0554
Seal Assembly - Master (Rigid) 2 269-7103
Thrust Ring 96 152-8071
Thrust Ring - Master 2 269-4004
Track Hardware 1
Bolt 196 6V-1792
Nut 196 1S-1860
1 Not part of link assembly; required to assemble track group.

261
 Timberking
521, 522, TK721, TK722, TK741

TK721, TK722, TK741 GREASE TRACK

SPLIT MASTER LINKS
TK721, 10200001-10200351; TK722, 10300001-10300452; TK741, 20200001-20200228
8.00" (203.3 mm)PITCH - 3/4" BOLT

PART
QUANTITY NUMBER
Link Assembly -- 49 Section 2 198-1001
Components of Link Assembly
Track Links
RH Pin End Master 1 8E-7407
LH Pin End Master 1 8E-7408
RH Bushing End Master 1 8E-7409
LH Bushing End Master 1 8E-7410
RH Regular 48 8E-7405
LH Regular 48 8E-7406
Other Components
Pin 49 198-1125
Bushing 49 8E-7222
Seal Assembly (Rigid) 98 207-0554
Thrust Ring 98 152-8071
1
Track Hardware
Bolt 192 6V-1792
Nut 192 1S-1860
Master Bolt 4 9S-1838
1 Not part of link assembly; required to assemble track group.

521, 522, TK721, TK722, TK741 TRACK SHOES

8.00" (203.3 mm) PITCH 3/4" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER
Extreme Service (Trapezoidal Opening) (Clipped Grouser) 24.0" (610 mm) 207-5897
Extreme Service (Trapezoidal Opening) (Clipped Grouser) 28.0" (710 mm) 207-5283
Double Grouser (Trapezoidal Opening) 24.0" (610mm) 150-7865
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 209-4535
Triple Grouser (Heavy Duty) (Center Punched Shoes) (Tri) (RH) 35.4" (900 mm) 287-8269
Triple Grouser (Heavy Duty) (Center Punched Shoes) (Tri) (LH) 35.4" (900 mm) 287-8270

262
 Timberking
521, 522, TK721, TK722, TK741

TK721, TK722, TK741 TRACK SHOES

8.00" (203.2 mm) PITCH - 3/4" BOLT

REGULAR MASTER
SHOE PART SHOE PART
TYPE WIDTH NUMBER NUMBER
Extreme Service (Trapezoidal Opening) (Clipped Grouser) 24.0" (610 mm) 207-5897 207-5898
Extreme Service (Trapezoidal Opening) (Clipped Grouser) 28.0" (710 mm) 207-5283 207-5284
Double Grouser (Trapezoidal Opening) 24.0" (610mm) 150-7865 150-7866
Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 209-4535 209-4536
Triple Grouser (Heavy Duty) (Center Punched Slots) 35.4" (900 mm) 200-4274 200-4275 1
1 Double grouser shoe with trapezoidal opening.

521, 522, TK721, TK722, TK741 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Rim (25 Tooth) 1 207-3658
Bolt 16 7X-2575

521, 522, TK721, TK722, TK741 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 207-0469
Components of Group
Idler Assembly 1 207-0472
1
Bearing 2 6Y-2272
Shaft 1 112-9951
Bearing Blocks 2 115-3697
Pin 2 6Y-2266
Seal -- Duo-Cone Group 2 109-0885
Toric Ring 1 2 6Y-2270
Seal -- Shaft-O-Ring 2 8F-8882
Stopper 1 9G-5664
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

263
 Timberking
521, 522, TK721, TK722, TK741

521, 522, TK721, TK722, TK741 CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Roller Group (Star Design) 4 254-4095
1
Roller Group (SF) 1 206-1264
Mounting Hardware 2
Bolt 4 7X-2565
Washer 4 8T-4123
1 Refer to track roller table for component breakdown.
2 Not part of roller group, quantities shown are required to mount each roller group.

521, 522, TK721, TK722, TK741 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Single Flange (SF) Roller Group 2 206-1264 1
Double Flange (DF) Roller Group 16 206-1263
Components of Group
Roller Shell (SF) 1 206-9257
Roller Shell (DF) 1 206-1262
Bushing 2 6Y-1782
Shaft 1 206-9260
End Collar 2 158-8086
Pin 2 159-9526
Seal -- Duo-Cone Group (Symmetrical) 2 206-9212
Toric Ring 2 2 171-5713
Seal -- Shaft O-Ring 2 8F-6711
Plug 1 9W-2146
Mounting Hardware 3
Bolt 4 7X-2565
Washer 4 8T-4123
1 Position next to idler (front position).
2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

522, TK722 TRACK ROLLER GUARDS (FULL LENGTH)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 8 207-0476
Spacer 16 152-8555
Bolt (24 mm) (340 mm length) 16 127-4834
Nut 48 8T-4001
Bolt (24 mm) (70 mm length) 32 7X-2576
Washer 96 8T-4167

264
 Timberking
532, 541, TK732

532, 541, TK732 GREASE TRACK

532, 53200001-UP; 541, 54100001-UP; TK732, 10400001-UP
8.50" (215.9 mm) PITCH - 22 mm BOLT

PART
QUANTITY NUMBER
Link Assembly -- 47 Section 2 213-1975
Track Links
RH Regular 47 6Y-2589
LH Regular 47 6Y-2590
Other Components
Pin 46 6Y-2751
Master Pin 1 6Y-2748
Bushing 46 201-0827
Master Bushing 1 201-0828
Seal (Poly W) 92 179-3426
Master Seal (Poly W) 2 179-3428
Thrust Ring 90 261-1017
Master Thrust Ring 2 261-1018
Track Hardware 1
Bolt 188 143-4891
Nut 188 9W-4381
1 Not part of link assembly; required to assemble track group.

532, 541, TK732 TRACK SHOES

8.50" (215.9 mm)PITCH - 22 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 6I-9893
Extreme Service (Trapezoidal Opening) (Clip Grouser) 27.6" (700 mm) 152-8558
Double Grouser (Trapezoidal Opening) (Clip Grouser) 27.6" (700 mm) 196-4083

532, 541, TK732 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Rim (23 Tooth) 1 6Y-5685
Bolt 16 7X-2575

265
 Timberking
532, 541, TK732

532, 541, TK732 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 102-8152
Components of Group
Idler Assembly 1 136-3847
1
Bearing 2 6Y-8023
Shaft 1 6Y-8028
Bearing Blocks 2 7Y-1248
Pin 2 6Y-8029
Seal -- Duo-Cone Group 2 109-0881
Toric Ring 1 2 5P-9120
Seal - Shaft O- Ring 2 1H-7339
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

532, 541, TK732 CARRIER ROLLERS

STAR DESIGN

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 4 228-6405
Roller Group 1 183-2874
Components of Group
Roller Shell (SF) 1 183-2875
Bearing 1 2 6Y-2792
Shaft 1 183-2883
End Collar 2 179-1497
Pin 2 179-1499
Seal -- Duo-Cone Group 2 148-3533
1
Toric Ring 2 160-6631
Seal - Shaft O- Ring 2 8F-8882
Plug 1 9W-2146
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

266
 Timberking
532, 541, TK732

532, 541, TK732 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 18 183-2879
Components of Group
Roller Shell (DF) 1 183-2880
1
Bearing 2 6Y-2792
Shaft 1 183-2883
End Collar 2 179-1497
Pin 2 179-1499
Seal -- Duo-Cone Group 2 148-3533
1
Toric Ring 2 160-6631
Seal - Shaft O- Ring 2 8F-8882
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 7X-2454
Washer 4 8T-4167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Not part of roller group, quantities shown are required to mount each roller group.

532, 541, TK732 TRACK ROLLER GUARDS (FULL LENGTH)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 8 152-8570
Spacer 16 152-8555
Bolt (24 mm) (340 mm length) 16 127-4834
Nut 48 8T-4001
Bolt (24 mm) (70 mm length) 32 7X-2576
Washer 96 8T-4167

267
 Timberking
551, 552, TK751, TK752

551, 552, TK751, TK752 GREASE TRACK

551, 55100001-UP; 552, 52200001-UP; TK751, 30100001-UP; TK752, 30200001-UP
8.50" (215.9 mm) PITCH - 24 mm BOLT

PART
QUANTITY NUMBER
Link Assembly -- 47 Section 2 256-6081
Track Links
RH Regular 47 209-6383
LH Regular 47 209-6384
Other Components
Pin 46 8E-4272
Master Pin 1 253-2740
Bushing 46 227-3029
Master Bushing 1 251-8368
Seal Assembly (Rigid) 92 250-3998
Master Seal Assembly (Rigid) 2 251-7757
Thrust Ring 92 3P-0623
Master Thrust Ring 2 251-8364
Stopper 1 7G-4332
Plug 1 6Y-0473
1
Track Hardware
Bolt 188 150-4741
Nut 188 151-4742
1 Not part of link assembly; required to assemble track group.

551, 552, TK751, TK752 TRACK SHOES

8.50" (215.9 mm) PITCH - 24 mm BOLT

TYPE WIDTH PART NUMBER

Extreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 258-8328
Extreme Service (Trapezoidal Opening) (Clip Grouser) 28.0" (710 mm) 253-0336

551, 552, TK751, TK752 SPROCKETS

PART
(PER SIDE) QUANTITY NUMBER
Sprocket Rim (23 Tooth) 1 166-3729
Bolt 16 7X-2575

268
 Timberking
551, 552, TK751, TK752

551, 552, TK751, TK752 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 2 102-8152
Components of Group
Idler Assembly 1 136-3847
1
Bearing 2 6Y-8023
Shaft 1 6Y-8028
Bearing Blocks 2 7Y-1248
Pin 2 6Y-8029
Seal -- Duo-Cone Group 2 109-0881
Toric Ring 1 2 5P-9120
Seal - Shaft O- Ring 2 1H-7339
Plug 1 7H-3171
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

551, 552, TK751, TK752 CARRIER ROLLERS

STAR DESIGN

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Group 4 228-6405
Roller Group 1 183-2874
Components of Group
Roller Shell (SF) 1 183-2875
Bearing 1 2 6Y-2792
Shaft 1 183-2883
End Collar 2 179-1497
Pin 2 179-1499
Seal -- Duo-Cone Group 2 148-3533
1
Toric Ring 2 160-6631
Seal - Shaft O- Ring 2 8F-8882
Plug 1 9W-2146
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

269
 Timberking
551, 552, TK751, TK752

551, 552, TK751, TK752 TRACK ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) 18 183-2879
Components of Group
Roller Shell (DF) 1 183-2880
1
Bearing 2 6Y-2792
Shaft 1 183-2883
End Collar 2 179-1497
Pin 2 179-1499
Seal -- Duo-Cone Group 2 148-3533
1
Toric Ring 2 160-6631
Seal - Shaft O- Ring 2 8F-8882
Plug 1 9W-2146
Mounting Hardware 2
Bolt 4 7X-2454
Washer 4 8T-4167
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 Not part of roller group, quantities shown are required to mount each roller group.

551, 552, TK751, TK752 TRACK ROLLERS GUARDS (FULL LENGTH)

PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 8 152-8570
Spacer 16 152-8555
Bolt (24 mm) (340 mm length) 16 127-4834
Nut 48 8T-4001
Bolt (24 mm) (70 mm length) 32 7X-2576
Washer 96 8T-4167

270
 Mini Hydraulic Excavators
INDEX

Mini Hydraulic Excavators

MODELS PAGE NO.

301.8C, 301.6C, 301.8, 301.6, 301.5...................................................................... 272

303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5............................................... 274
304CCR, 305CCR, 304CR, 305CR, 304.5............................................................. 282

271
Mini Hydraulic Excavators
301.8C, 301.6C, 301.8, 301.6, 301.5

301.8C, 301.6C BELTS

JBB, JSB

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 9.1" (231.5 mm) 231-1911

301.8, 301.6, BELTS

BDH, BFA

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 9.1" (231.5 mm) 234-9369

301.5 BELTS
3YW

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 9.1" (231.5 mm) 234-9368

301.8C, 301.6C, 301.8, 301.6, 301.5 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (19 Tooth) 1 139-4304
Bolt (10 mm) 9 105-3484

301.8C, 301.6C, 301.8, 301.6, 301.5 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 226-4049
Components of Idler Assembly
Idler 1 226-4050
Shaft 1 139-6270
Ring - Retaining 2 6V-7644
Bearing- Ball 2 1B-3867
Seal 2 139-6364
Ring - Retaining 2 8T-9598

272
 Mini Hydraulic Excavators
301.8C, 301.6C, 301.8, 301.6, 301.5

301.8C, 301.6C ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Roller Assembly (Ends) (Includes Shaft) 6 232-4466
1
Mounting Hardware
Bolt (12 mm) 2 8T-4139
Washer 2 8T-4223
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

301.8, 301.6, 301.5 ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Roller Assembly (Ends) (Includes Shaft) 4 232-4466
Roller Assembly (Middle) (Includes Shaft) 2 139-6261
Components of Roller Assembly 139-6261
Bearing- Ball 2 096-9296
Ring - Retaining 2 7Y-5267
Plug 1 085-8893
Mounting Hardware 1
Bolt (12 mm) 2 8T-4192
Washer 2 8T-4223
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

273
Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303CCR BELTS
BXT

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 11.8" (300 mm) 263-9250

303CR BELTS
CAR, DMA

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 11.8" (300 mm) 233-2048

303.5CCR BELTS
DMY

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 11.8" (300 mm) 263-9262

303.5 BELTS
AFW, DCH

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 11.8" (300 mm) 153-5982

302.5C BELTS
GBB

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 11.9" (302.5 mm) 231-1910

302.5 BELTS
4AZ

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 11.8" (300 mm) 146-6062

274
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303.5CCR, 303CCR STEEL TRACK

DMY, BXT
4.00" (101.6 MM) PITCH

QUANTITY PART NUMBER

Track Assembly - 46 Section 2 263-9252
Components of Track Assembly
Link Assembly 1 263-9253
RH Master 1 158-4678
LH Master 1 158-4679
RH Regular 45 158-4676
LH Regular 45 158-4677
Pin 45 158-4681
Master Pin (Slip Fit) 1 158-4682
Bushing 45 158-4680
Master Bushing 1 260-6400
Cotter 1 158-4683
1
Double Grouser Track Shoe 12.0" (300 mm) 46 158-4684
Rubber Track Pad Offerings and Mounting Hardware (Mounts to Double Grouser Shoe)
Rubber Pad (300 mm) (With 2 Mounting Studs) 46 184-2184
Nut (12 mm) 92 263-9269
Washer 92 163-7094
Rubber Pad (300 mm) (With 1 Mounting Bolt and Side Clip) 46 212-5118
Bolt (12 mm) 46 212-5119
Washer 46 212-5120
1 Shoes welded to the link assembly.

275
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303CR, 303.5 STEEL TRACK

CAR, DMA, AFW, DCH
4.00" (101.6 mm) PITCH

QUANTITY PART NUMBER

Track Assembly - 43 Section 2 163-7538
Components of Track Assembly
Link Assembly 1 163-7539
RH Master 1 158-4678
LH Master 1 158-4679
RH Regular 42 158-4676
LH Regular 42 158-4677
Pin 42 158-4681
Master Pin (Slip Fit) 1 158-4682
Bushing 42 158-4680
Master Bushing 1 260-6400
Cotter 1 158-4683
1
Double Grouser Track Shoe 12.0" (300 mm) 43 158-4684
1 Shoes welded to the link assembly.

302.5C, 302.5 STEEL TRACK

4AZ, GBB

QUANTITY PART NUMBER

Track Assembly - 40 Section 2 153-5985
Components of Track Assembly
Link Assembly 1 158-4675
RH Master 1 158-4678
LH Master 1 158-4679
RH Regular 39 158-4676
LH Regular 39 158-4677
Pin 39 158-4681
Master Pin (Slip Fit) 1 158-4682
Bushing 39 158-4680
Master Bushing 1 260-6400
Cotter 1 158-4683
1
Double Grouser Track Shoe 12.0" (300 mm) 40 158-4684
1 Shoes welded to the link assembly.

276
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303CR SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (21 Tooth) 1 193-7091
Bolt (12 mm) 9 8T-4956
Washer 9 8T-4223

303.5CCR, 303CCR SPROCKET

(PER SIDE) QUANTITY PART NUMBER

Sprocket (23 Tooth) 1 264-5371
Bolt (12 mm) 11 8T-4139
Washer 11 8T-4223

303.5 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (21 Tooth) 1 172-1965
Bolt (12 mm) 9 8T-4956
Washer 9 8T-4223

302.5C, 302.5 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (21 Tooth) 1 140-4022
Bolt (12 mm) (Model 302.5) 9 101-7402
Bolt (12 mm) (Model 302.5C) 9 6V-8200

303.5CCR, 303CCR, IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 267-4829
Shaft 2 267-4831
Seal - Duo-Cone Group 4 234-8984
Seal --Shaft O-Ring 4 095-1595

277
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303CR, 303.5 IDLERS

PART
(PER MACHINE) QUANTITY NUMBER
Idler Assembly 2 172-2100
Components of Idler Assembly
Shaft 1 146-0984
Bearing- Ball 2 095-7962
Ring - Retaining 2 2W-1145
Seal - Oil 2 146-0985

302.5C IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 2 -1
Other Components
Idler Assembly 1 234-8968
Shaft 1 234-8967
Seal - Duo-Cone Group 2 234-8984
Seal --Shaft O-Ring 2 095-1595
1Order Idler Group (RH) 234-6204, or Idler Group (LH) 234-6203. Both of these idler groups contains, idler assembly, idler shaft, cylinder
assembly, rod assembly, spring, and supports.

302.5 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 140-4005
Components of Idler Assembly
Shaft 1 140-4008
Bearing- Ball 2 1B-3876
Ring - Retaining 2 8T-9598
Seal 2 139-6343

303.5CCR, 303CCR, CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Carrier Roller Group (Includes Shaft) 2 266-8794
1
Mounting Hardware
Bolt (16 mm) 1 8T-4173
Washer 2 7X-0515
Nut 2 8T-4132
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

278
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303CR CARRIER ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Carrier Roller Assembly (Includes Shaft) 2 193-7070
Components of Assembly
Bearing- Ball 2 1B-3867
Seal Assembly 1 172-1768
Ring - Retaining 1 6V-7644
Cap Assembly 1 172-1769
Mounting Hardware 1
Bolt (10 mm) 1 8T-4178
Washer 2 8T-4121
Nut 2 8T-4133
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

302.5C, 303.5, 302.5 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Carrier Roller Assembly (Includes Shaft) 2 146-6064
Components of Assembly
Bearing- Ball 2 1B-3867
Ring - Retaining 2 6V-7644
Ring - Retaining 1 8T-9598
Seal - Oil 1 140-4338
Mounting Hardware 1
Bolt (10 mm) (For models 303.5, 302.5) 1 8T-4178
Washer (For models 303.5, 302.5) 2 8T-4121
Nut (For models 303.5, 302.5) 2 8T-4133
Bolt (10 mm) (For model 302.5C) 1 8T-4172
Nut (For model 302.5C) 1 096-4883
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

279
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

302.5C ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Roller Group 6 234-6206
Components of Group
Roller Assembly 1 234-8952
Shaft Assembly 1 234-8950
Collar 1 234-8958
Seal - Duo-Cone Group 2 234-8959
Seal - Shaft O-ring 1 095-1657
Ring - Retaining 1 234-8962
Plug 1 9F-2247
1
Mounting Hardware
Bolt (16 mm) 2 7X-2553
Washer 2 7X-0515
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

303.5CCR, 303CCR ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Roller Assembly (Center Flange) (Includes Shaft) 8 266-8793
1
Mounting Hardware
Bolt (16 mm) 16 8T-7338
Washer 16 7X-0515
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

303CR, 303.5, 302.5 ROLLERS

PART
(PER MACHINE) QUANTITY NUMBER
Roller Assembly (Center Flange) (Includes Shaft) -1 185-7280
Components of Assembly
Bearing- Ball 2 1B-3867
Ring - Retaining 2 8T-9598
Seal - Oil 2 140-4338
Ring - Retaining 2 234-8962
Plug 1 085-8893
Mounting Hardware 2
Bolt (10 mm) 4 8T-4182
Washer 4 8T-4121
1 8 Roller Groups on 303CR and 303.5, 6 Roller Groups on 302.5.
2 These components are not included in the roller assembly; quantities shown are required to mount each roller.

280
 Mini Hydraulic Excavators
303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303.5CCR, 303CCR GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 263-9268
Guard Assembly - LH 2 263-9267
Bolt (12 mm) 12 8T-4956
Washer 12 8T-4223

303CR, 303.5 GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 185-0656
Guard Assembly - LH 2 185-0657
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223

302.5C GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 260-2665
Guard Assembly - LH 2 260-2666
Washer 12 7X-0578
Nut 12 096-4883

302.5 GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 140-4314
Guard Assembly - LH 2 140-4313
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

281
 Mini Hydraulic Excavators
304CCR, 305CCR, 304CR, 305CR, 304.5

304CCR, 305CCR BELTS

FPK, HWJ

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 15.7" (400 mm) 263-9237

304CR, 305CR BELTS

BTN, NAD, DSA, DMW

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 15.7" (400 mm) 238-3231

304.5 BELTS
ANR, WAK

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 15.7" (400 mm) 153-5981

304CCR, 305CCR TRACK STEEL

FPK, HWJ
5.31" (135 mm) PITCH - 12 mm BOLT

QUANTITY PART NUMBER

Link Assembly - 40 Section 2 263-9240
Track Links
RH Master 1 158-4769
LH Master 1 158-4770
RH Regular 39 158-4767
LH Regular 39 158-4768
Other Components
Pin 39 158-4772
Master Pin (Slip Fit) 1 158-4773
Bushing 40 158-4771
Cotter 1 158-4774
1
Track Hardware
Bolt (12 mm) 160 158-4775
Nut 160 158-4776
1 Not part of link assembly; required to assemble track group.

282
 Mini Hydraulic Excavators
304CCR, 305CCR, 304CR, 305CR, 304.5

304CR, 305CR, 304.5 STEEL TRACK

BTN, NAD, DSA, DMW, ANR, WAK
5.31" (135 mm) PITCH - 12 mm BOLT

QUANTITY PART NUMBER

Track Group - 38 Section 2 155-6844
Components of Track Group
Link Assembly 1 158-4766
RH Master 1 158-4769
LH Master 1 158-4770
RH Regular 37 158-4767
LH Regular 37 158-4768
Pin 37 158-4772
Master Pin (Slip Fit) 1 158-4773
Bushing 38 158-4771
Cotter 1 158-4774
Triple Grouser Track Shoe 16.0" (400 mm) (4 extra holes to mount rubber pads) 38 158-4777
Bolt (12 mm) 152 158-4775
Nut 152 158-4776
Rubber Track Pad Offerings and Mounting Hardware (Mounts to Triple Grouser Shoe)
Rubber Pad (400 mm) (With 4 Mounting Studs) 38 163-7093
Washer 152 163-7094
Nut (12 mm) 152 139-6411
Rubber Pad (400 mm) (With 2 Mounting Bolts and Side Clip) 38 212-5129
Bolt (12 mm) 152 212-5119
Washer 152 212-5120

304CCR, 305CCR TRACK SHOES

5.31" (135 MM) PITCH - 12 mm BOLT

TYPE WIDTH PART NUMBER

Triple Grouser 15.7" (400 mm) 158-4777
1
Rubber Pad (With 4 Mounting Studs) 15.7" (400 mm) 163-7093
Washer - 163-7094
Nut (12 mm) - 263-9269
1
Rubber Pad (400 mm) (With 2 Mounting Bolts and Side Clip) 15.7" (400 mm) 212-5129
Bolt (12 mm) - 212-5119
Washer - 212-5120
1 Pad bolts to triple grouser shoe.

283
Mini Hydraulic Excavators
304CCR, 305CCR, 304CR, 305CR, 304.5

305CCR SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (19 Tooth) 1 260-6341
Bolt (14 mm) 12 085-9768
Washer 12 7X-0510

304CCR, 304CR, 305CR, 304.5 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (19 Tooth) 1 158-4795
Bolt (14 mm) 9 085-9768
Washer 9 7X-0510

304CCR, 305CCR IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 267-4813
Shaft 2 267-4817
Seal - Duo-Cone Group 4 267-4819
Seal --Shaft O-Ring 4 095-1600

305CR, 304.5 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 240-6304
Components of Idler Assembly
Idler 1 240-6306
Shaft 1 240-6305
Bearing- Ball 2 095-0990
Ring - Retaining 2 8T-0707
Seal - Oil 2 120-4660

284
 Mini Hydraulic Excavators
304CCR, 305CCR, 304CR, 305CR, 304.5

304CR IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 2 241-5972
Components of Idler Assembly
Idler 1 241-5973
Shaft 1 241-5976
Bearing- Ball 2 095-0990
Ring - Retaining 2 8T-0707
Seal - Oil 2 120-4660

304CCR, 305CCR CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Carrier Roller Group (Includes Shaft) 2 265-7675
1
Mounting Hardware
Bolt (16 mm) 1 8T-4173
Washer 2 7X-0515
Nut 2 8T-4132
1 These components are not included in the roller group; quantities shown are required to mount each roller.

304CR, 305CR, 304.5 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Carrier Roller Assembly (Includes Shaft) 2 172-1764
1
Mounting Hardware
Bolt (16 mm) 1 7X-2556
Washer 2 9X-8257
Nut 2 8T-4132
1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

304CCR, 305CCR ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Roller Group (Center Flange) (Includes Shaft) 10 265-7674
1
Mounting Hardware
Bolt (16 mm) 2 8T-4140
Washer 2 7X-0515
1 These components are not included in the roller group; quantities shown are required to mount each roller.

285
 Mini Hydraulic Excavators
304CCR, 305CCR, 304CR, 305CR, 304.5

304CR, 305CR, 304.5 ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

1
Roller Assembly (Center Flange) (Includes Shaft) - 158-4765
Components of Assembly
Bushing 2 158-4714
Seal Assembly 2 158-4712
Seal - Shaft O-Ring 2 158-4713
Ring - Retaining 2 234-8962
Plug 1 3D-4603
2
Mounting Hardware
Bolt (10 mm) 4 8T-4182
Washer 4 8T-4121
1 8 Roller Groups on 304CR, 10 Roller Groups on 305CR and 304.5.
2 These components are not included in the roller assembly; quantities shown are required to mount each roller.

304CCR, 305CCR GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 263-9265
Guard Assembly - LH 2 263-9264
Bolt (12 mm) 12 8T-4183
Washer 12 8T-4223

304CR, 305CR GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 163-7187
Guard Assembly - LH 2 163-7188
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

304.5 GUIDING GUARDS

FOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBER

Guard Assembly - RH 2 140-4314
Guard Assembly - LH 2 140-4313
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223

286
 Multi-Terrain Loaders
INDEX

Multi-Terrain Loaders
MODELS PAGE NO.

257B, 247B, 257, 247 .............................................................................................288

277C, 287C, 297C...................................................................................................290
277B, 267B, 277, 267..............................................................................................294
287B, 287................................................................................................................ 298

287
 Multi-Terrain Loaders
257B, 247B, 257, 247

257B, 247B, 257, 247 BELTS

SLK, MTL, CMM, CML

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 15.0" (380 mm) 207-9711
Belt - Rubber (Smooth) 2 15.0" (380 mm) 278-1215

257B, 247B, 257, 247 SPROCKET ASSEMBLY

PART
(PER SIDE) QUANTITY NUMBER
Sprocket 1 234-0742
Ring 1 210-4647
Sleeve - Outer 12 210-4646
Sleeve - Inner 12 210-4645
Bolt (1/2") 12 1A-0168
Locknut 12 9X-0941

257B, 247B, 257, 247 WHEEL GP - IDLER

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Idler 4 223-8396
Components of Group
Wheel Assembly- Idler 1 223-8397
Cup 2 7T-9755
Cone 1 7T-9754
Seal Group 1 219-4302
Seal 1 212-6681
Seal Retainer 1 216-6141
Seal -O-Ring 1 3P-0815
Retaining Ring 1 6V-1366
Retaining Ring 1 216-6148
1
Mounting Hardware
Spacer 1 224-9409
Cone 1 7T-9754
Washer 1 216-6149
Locknut 1 212-6559
Cap 1 215-4006
Retaining Ring 1 216-6148
1 These components are not included in the idler group; quantities shown are required to mount each idler.

288
 Multi-Terrain Loaders
257B, 247B, 257, 247

257B, 247B, 257, 247 WHEEL GP - BOGIE MIDDLE

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Bogie Middle 16 212-6628
Components of Group
Wheel Assembly- Bogie Middle 1 206-3812
Cup 2 3P-8680
Cone 1 3P-8681
Seal 1 212-6681
Spacer 1 215-3956
Retaining Ring 1 006-8663
1
Mounting Hardware
Spacer 1 224-9407
Cone 1 3P-8681
Washer 1 216-6149
Locknut 1 212-6559
Cap 1 212-6682
Retaining Ring 1 2D-0592
1 These components are not included in the idler group; quantities shown are required to mount each idler.

257B, 247B, 257, 247 WHEEL GP - BOGIE END

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Bogie End 4 223-8398
Components of Group
Wheel Assembly- Bogie End 1 223-8399
Cup 2 7T-9755
Cone 1 7T-9754
Seal Group 1 219-4302
Seal 1 212-6681
Seal Retainer 1 216-6141
Seal -O-Ring 1 3P-0815
Retaining Ring 1 6V-1366
Retaining Ring 1 216-6148
Mounting Hardware 1
Spacer 1 224-9409
Cone 1 7T-9754
Washer 1 216-6149
Locknut 1 212-6559
Cap 1 215-4006
Retaining Ring 1 216-6148
1 These components are not included in the idler group; quantities shown are required to mount each idler.

289
Multi-Terrain Loaders
277C, 287C, 297C

277C, 287C, 297C BELTS

JWF, MAS, GCP

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 18.0" (460 mm) 258-3050

277C, 287C, 297C SPROCKET ASSEMBLY

PART
(PER SIDE) QUANTITY NUMBER
Sprocket 1 258-3085
Ring - Outer 1 258-3086
Ring - Middle 1 258-3084
Ring - Inner 1 258-3087
Sleeve - Outer 36 258-3089
Sleeve - Inner 36 258-3088
Bolt (1/2") 12 258-3122
Washer 12 8T-4223
Locknut 12 1K-6872

290
 Multi-Terrain Loaders
277C, 287C, 297C

277C, 287C, 297C WHEEL GP - IDLER (Front & Rear)

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Idler 4 258-3030
Components of Group
Axle Group - Idler 1 258-3031
Sleeve 1 258-3025
Seal 1 258-3112
Cone 2 2F-8509
Cup 2 002-1212
Housing 1 258-3026
Seal Gp 1 258-3035
Plug 1 9F-2247
Bogie Wheel -Inner 1 258-3032
Bogie Wheel - Outer 1 258-3033
Bolt (1/2") Wheels to Axle 12 8C-4436
Washer 12 258-3054
Mounting Hardware, Front Idler Wheel Groups to Track Roller Frame 1
Wheel Axle Assembly 1 258-3065
Seal-O-Ring 2 5K-0227
Washer 1 258-3074
Locknut 1 258-3075
Cap 2 258-3092
Retainer Ring 2 6V-5590
Mounting Hardware, Rear Idler Wheel Groups to Track Roller Frame 1
Idler Axle (Rear) 1 258-3064
Seal-O-Ring 2 5K-0227
Washer 2 258-3074
Locknut 2 258-3075
Cap 2 258-3092
Retainer Ring 2 6V-5590
1 These components are not included in the idler wheel group; quantities shown are required to mount each idler wheel.

291
 Multi-Terrain Loaders
277C, 287C, 297C

277C, 287C, 297C WHEEL GP - BOGIE

Single Level Suspension

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Bogie 10 258-3020
Components of Group
Axle Group - Bogie 1 258-3021
Sleeve 1 258-3025
Seal 1 258-3112
Cone 2 2F-8509
Cup 2 002-1212
Housing 1 258-3026
Seal Gp 1 258-3035
Plug 1 9F-2247
Bogie Wheel -Inner 1 258-3023
Bogie Wheel - Outer 1 258-3022
Bolt (3/8") Wheels to Axle 12 258-3028
Washer 12 258-3027
1
Mounting Hardware, Bogie Wheel Group to Track Roller Frame
Wheel Axle Assembly 1 258-3065
Seal-O-Ring 2 5K-0227
Washer 1 258-3074
Locknut 1 258-3075
Cap 2 258-3092
Ring Retainer 2 6V-5590
Scrapers and Hardware to Bolt to Track Roller Frame
Scraper Assembly (positioned between bogie wheels 2 & 3 and 4 & 5) 2 258-3118
Bolt (3/8") 2 258-3103
Nut 2 235-1088
Scraper (Long) (positioned between front idler wheel and first bogie wheel) 2 258-3116
Scraper (Short) (positioned between front idler wheel and first bogie wheel) 2 258-3117
Bolt (3/8") 4 1D-4704
Nut 4 235-1088
1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie wheel.

292
 Multi-Terrain Loaders
277C, 287C, 297C

277C, 287C, 297C WHEEL GP - BOGIE

Dual Level Suspension

PART
(PER MACHINE) QUANTITY NUMBER
Components of Suspension Group (Dual Level)
Gp - Bogie 8 258-3041
Bolt (1/2") (Bogie Gp To Bogie Gp) 16 8T-8919
Washer 32 7X-3392
Nut 16 6V-8188
Bogie Wheel 16 258-3023
Bolt (3/8") Wheels to Bogie Gp 96 8T-2502
Washer 96 8T-4896
Spacer (Between Bogie Group and Frame) 4 258-3016
Rubber Cord 16 258-3047
Cover Plate 4 258-3017
Bolt (3/8") (Bogie Group to Frame) 8 4L-9337
Washer 8 8T-4896
Scraper (Front Idler) 2 258-3116
Bolt (3/8") Scraper to Frame 4 1B-2706
Nut 4 235-1088

293
Multi-Terrain Loaders
277B, 267B, 277, 267

277B, 267B, 277, 267 BELTS

MDH, CYC, CNC, CMP

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 18.0" (460 mm) 238-7664
Belt - Rubber (Outside Guide Lugs) 2 20.0" (508 mm) 278-1219

277B, 267B, 277, 267 SPROCKET ASSEMBLY

PART
(PER SIDE) QUANTITY NUMBER
Sprocket 1 261-6151
Ring 2 200-0996
Sleeve - Outer 24 199-5333
Sleeve - Inner 24 199-5332
Bolt (1/2") 12 8S-6212
Locknut 12 1K-6872

294
 Multi-Terrain Loaders
277B, 267B, 277, 267

277B, 267B, 277, 267 WHEEL GP - BOGIE

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Bogie 12 261-6104
Components of Group
Axle Group - Bogie 1 261-6105
Tube Assembly - Bogie 1 199-5432
Axle Shaft - Bogie 1 204-1375
Bearing 2 199-9929
Seal 2 199-9928
Plug 1 108-2187
Bogie Wheel 2 199-5428
Bogie Wheel - Center 1 199-5429
Plate 2 200-0809
Bolt (3/8") Outer Bogey Wheels 16 1B-2706
Bolt (3/8") Center Bogey Wheel 8 228-8403
Lockwasher 24 113-0693
Locknut 24 3K-6060
1
Mounting Hardware, Wheel Group to Pivot Assembly (Carriage Assembly)
Pivot Assembly (Mounts 2 Wheel Groups) 1 199-5370
Plate 2 204-1371
Bolt (3/8") 4 4L-6454
Lockwasher 4 113-0693
2
Mounting Hardware Carriage Assemblies to Frame Assembly
Bolt (1/2") Rear 4 1A-1460
Bolt (1/2") Middle and Front 8 8T-8919
Lockwasher 12 3B-4508
Locknut 12 9X-0941
1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.
2 These components are not included in bogie wheel group; quantities shown are required to mount 3 carriage assemblies.

295
 Multi-Terrain Loaders
277B, 267B, 277, 267

277B, 267B, 277, 267 WHEEL GP - IDLER (Front & Rear)

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Idler (Front & Rear) 4 261-6102
Components of Group
Axle Group - Idler 1 261-6103
Tube Assembly - Idler 1 236-5092
Axle Shaft - Idler 1 236-5090
Cone 2 111-2414
Cup 2 111-2415
Retaining Ring 2 234-0743
Seal 2 199-9928
Plug 1 108-2187
Idler Wheel 2 230-3732
Idler Wheel - Center 1 230-3733
Cap Assembly 2 230-3772
Bolt (1/2") 24 223-8372
Washer 24 8T-4223
Locknut 24 1K-6872
Mounting Hardware 1
Plate 2 204-1371
Bolt (3/8") 4 4L-6454
Lockwasher 4 113-0693
1 These components are not included in the idler group; quantities shown are required to mount each idler.

296
 Multi-Terrain Loaders
277B, 267B, 277, 267

277B, 267B, 277, 267 WHEEL GP - TENSIONER ASSEMBLY

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Bogie 2 261-6104
Components of Group
Axle Group - Bogie 1 261-6105
Tube Assembly - Bogie 1 199-5432
Axle Shaft - Bogie 1 204-1375
Bearing 2 199-9929
Seal 2 199-9928
Plug 1 108-2187
Bogie Wheel 2 199-5428
Bogie Wheel - Center 1 199-5429
Plate 2 200-0809
Bolt (3/8") Outer Bogey Wheels 16 1B-2706
Bolt (3/8") Center Bogey Wheel 8 228-8403
Lockwasher 24 113-0693
Locknut 24 3K-6060
1
Mounting Hardware, Wheel Group to Plate Assembly
Plate 2 204-1371
Bolt (3/8") 4 4L-6454
Lockwasher 4 113-0693
Mounting Hardware Tensioner Assemblies to Frame Assembly 2
Bolt (1/2") 2 5P-2566
Lockwasher 2 3B-4508
Locknut 2 9X-0941
1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.
2 These components are not included in bogie wheel group; quantities shown are required to mount each tensioner assemblies.

297
 Multi-Terrain Loaders
287B, 287

287B, 287 BELTS

ZSA, CNY

PART
(PER MACHINE) QUANTITY WIDTH NUMBER
Belt - Rubber 2 18.0" (460 mm) 220-8161

287B, 287 SPROCKET ASSEMBLY

PART
(PER SIDE) QUANTITY NUMBER
Sprocket 1 261-6150
Ring 2 200-0996
Sleeve - Outer 24 199-5333
Sleeve - Inner 24 199-5332
Bolt (1/2") 12 8S-6212
Locknut 12 1K-6872

287B, 287 WHEEL GP- BOGIE

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Bogie 10 261-6108
Components of Group
Axle Group - Bogie 1 261-6109
Tube Assembly - Bogie 1 222-5687
Axle Shaft - Bogie 1 222-5686
Bearing 4 199-9929
Retainer 2 210-4693
Retainer - Ring 2 2J-8172
Seal 2 199-9928
Plug 1 108-2187
Bogie Wheel 2 238-7728
Bogie Wheel - Center 1 238-7729
Plate 2 261-6111
Plate 2 261-6112
Bolt (3/8") 24 228-8403
Lockwasher 24 113-0693
Locknut 24 2K-4973
1
Mounting Hardware
Plate 2 204-1371
Bolt (3/8") 4 4L-6454
Lockwasher 4 113-0693
1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.

298
 Multi-Terrain Loaders
287B, 287

287B, 287 WHEEL GP- IDLER (FRONT AND REAR)

PART
(PER MACHINE) QUANTITY NUMBER
Wheel Gp - Idler (Front & Rear) 4 261-6106
Components of Group
Axle Group - Idler 1 261-6107
Tube Assembly - Idler 1 222-5683
Axle Shaft - Idler 1 222-5682
Cone 2 111-2414
Cup 2 111-2415
Retaining Ring 2 234-0743
Seal 2 199-9928
Plug 1 108-2187
Idler Wheel 2 230-3732
Idler Wheel - Center 1 230-3733
Cap Assembly 2 222-5684
Bolt (1/2") 24 223-8372
Washer 24 8T-4223
Locknut 24 1K-6872
Mounting Hardware 1
Bracket 2 238-7709
Bolt (3/8") 8 4L-6454
Lockwasher 8 113-0693
1 These components are not included in the idler group; quantities shown are required to mount each idler.

299
300
 Paving Products
INDEX

Paving Products
MODELS PAGE NO.

PM465..................................................................................................................... 302
PM565B, PM565..................................................................................................... 304
PR450, PR450C...................................................................................................... 309
PR750B, PR750C, PR1000, PR1000C................................................................... 311
AP650B, BG225C................................................................................................... 314
AP1050B, BG245C................................................................................................. 318
AP1050....................................................................................................................322
AP1055B BG2455C................................................................................................ 326

301
 Paving Products
PM465

PM465 TRACK
5.31" (135.0 mm) PITCH -- 1/2" BOLT

QUANTITY PART NUMBER

Link Assembly -- 30 Section 4 141-3245
Track Links
RH Master 1 3A-9617
LH Master 1 3A-9616
RH Regular 29 3A-9615
LH Regular 29 3A-9614
Other Components
Pin 29 117-8882
Pin-Master 1 117-8883
Bushing 29 117-8880
Bushing-Master 1 117-8881
Spacer 2 117-8884
Cotter 1 096-7033
Track Hardware 1
Bolt 120 3A-9605
Nut 120 117-8885
1 Not part of link assembly; required to assemble track group.

PM465 TRACK SHOES

5.31" (135.0 mm) PITCH -- 1/2" BOLT

SEALED PART
TYPE WIDTH NUMBER
Padded Shoe Assembly (Polyurethane) 10.00 in (254 mm) 236-8281

PM465 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (23 Tooth) 2 132-3546
Bolt 36 8T-4193
Washer 36 9X-8257

302
 Paving Products
PM465

PM465 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 4 6I-6488
Other Components (Per Idler)
Idler Assembly 1 6I-6489
1
Bearing 2 5I-6274
Shaft 1 102-8082
Bearing 2 102-8084
Pin-Spring 2 3E-4370
Plug 1 7H-3171
Seal -- Duo-Cone Group 2 093-1414
1
Toric Ring 2 093-1364
Seal -- Shaft O-Ring 2 095-1600
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

PM465 TRACK ROLLERS

FORMER PART
(PER MACHINE) QUANTITY NUMBER PART NUMBER
Single Flange (SF) 20 127-3806 1 244-3099
Components of Group
Roller -Bearing 2 - 247-7647
Roller Shell (SF) 1 6I-6525 -
Bearing 2 2 5I-6274 -
Shaft 1 102-8115 -
End Collar 1 127-3804 -
End Collar 1 127-3805 -
Seal -- Duo-Cone Group 2 136-0296 249-1776
Toric Ring 2 2 136-0297 -
Seal -- Shaft O-Ring 2 095-1659 4J-0520
Plug 1 3D-4603 -
Dowel 2 102-8116 096-6783
Mounting Hardware 3
Bolt 4 8T-4648 8T-4648
Washer 4 8T-4223 8T-4223
1 Recommend upgrading to 244-3099 Roller Group, due to larger tread diameter should replace all roller groups at the same time.
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 These components are not included in the roller group; quantities shown are required to mount each roller.

303
 Paving Products
PM565B, PM565

PM565B, PM565 TRACK

6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED PART
QUANTITY NUMBER
Link Assembly -- 26 Section 4 6Y-8795
Track Links
RH Master 1 9K-0029
LH Master 1 9K-0028
RH Regular 25 9K-6629
LH Regular 25 9K-6628
Other Components
Pin 25 9K-4060
Pin-Master 1 9K-4062
Bushing 25 9K-4061
Bushing-Master 1 7K-2020
Seal (Spring Washer) 104 7K-2018
Spacer 2 9K-4059
Track Hardware 1
Bolt 104 7H-3597
Nut 104 1M-1408
1 Not part of link assembly; required to assemble track group.

PM565B, PM565 TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER
Triple Grouser (plate thickness 12 mm) 13.7 in (348 mm) 105-5013
Triple Grouser (plate thickness 13 mm, curved leading edge) 13.7 in (348 mm) 9G-6396
Padded Shoe Assembly (Polyurethane) 13.7 in (348 mm) 236-8282

PM565B, PM565 SPROCKETS

6.75" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (19 Tooth) 2 1G-6133
Bolt 36 8T-4140
Washer 36 7X-0515

304
 Paving Products
PM565B, PM565

PM565B IDLERS
SYMMETRIC SEAL DESIGN

(PER MACHINE) QUANTITY PART NUMBER

Group 4 190-1551
Components of Group
Idler Assembly 1 190-2495
1
Bearing 2 8P-7002
Shaft 1 160-9757
Collar 2 160-9756
Retainer 2 160-9761
Thrust Washer 2 137-9518
Bolt 12 053-2294
Washer 12 5M-2894
Seal -- Duo-Cone Group (Symmetric) 2 161-7247
Toric Ring 1 2 161-7249
Seal -- Retainer 2 2H-4145
Seal -- Collar 2 5K-0216
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware 2
End Cap 2 125-3250
Pin 2 6B-6863
Bolt 4 7X-0349
Washer 4 8T-4122
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the idler group; quantities shown are required to mount each idler.

305
 Paving Products
PM565B, PM565

PM565B, PM565 IDLERS 1

FORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY PART NUMBER

Group 4 --
Components of Group
Idler Assembly 1 190-2495
2
Bearing 2 8P-7002
Shaft 1 6T-2620
Retainer 2 6T-2619
Thrust Washer 2 137-9518
Bolt 12 053-2294 3
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal -- Duo-Cone Group 2 7T-4080
2
Toric Ring 1 8P-7003
2
O-Ring 1 6V-2699
Seal -- Retainer 2 2H-4145
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware 4
End Cap 2 125-3250
Pin 2 6B-6863
Bolt 4 7X-0349
Washer 4 8T-4122
Special Application Seals (Low/High Temperature)
Seal -- Duo-Cone Group 2 7T-4086
Toric Ring 1 7T-4087
O-Ring 1 6V-2699
1 3TK108-UP
2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
3 Use 0S1594 bolt with former idler assembly 6T-2615
4 These components are not included in the idler group; quantities shown are required to mount each idler.

306
 Paving Products
PM565B, PM565

PM565 IDLERS
3TK1-107

(PER MACHINE) QUANTITY PART NUMBER

Group 4 --
Components of Group
Idler Assembly 1 8E-8907
Bushing Assembly 2 1V-9611
Bolt 12 9B-7237
Washer 12 8T-4896
Shaft 1 8V-4714
Seal GP -- Duo-Cone 2 2M-2858
Toric Ring 2 1M-3097
Seal -- Bushing 2 1H-8128
Seal -- Shaft 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Support Assembly (RH) 1 086-9723
Support Assembly (LH) 1 086-9722
Lock Pin 2 5M-5000
Bolt 2 7X-0310
Washer 2 5P-1076
Plate 1 086-9627
Bolt 4 7X-0325
Washer 4 8T-4223

307
 Paving Products
PM565B, PM565

PM565B, PM565 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 16 124-8237
Components of Group
Roller Shell (SF) 1 124-8238
Bushing Assembly 2 124-8248
Shaft 1 131-7239
End Collar 2 132-1951
Ring-Retainer 2 6V-6768
Seal -- Duo-Cone Group 2 2M-2858
Toric Ring 1 2 1M-3097
Seal -- Shaft O-Ring 2 7F-8267
Bushing O-Ring 2 1H-8128
Ring (Lock) 2 6H-7382
Stopper 1 7G-4332
Plug 1 6Y-0473
2
Mounting Hardware
Bolt 4 1A-8537
Washer 4 5P-8247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

308
 Paving Products
PR450, PR450C

PR450, PR450C TRACK

6.125" (155.6 mm) PITCH -- 9/16" BOLT

SEALED PART
QUANTITY NUMBER
Link Assembly -- 28 Section 3 6Y-8950
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 27 6Y-0935
LH Regular 27 6Y-0936
Other Components
Pin 28 6B-5278
Bushing 28 6Y-1717
Seal (Spring Washer) 112 6S-3146
1
Track Hardware
Bolt 108 4K-7038
Nut 108 7K-2017
Master Bolt 4 5A-3187
1 Not part of link assembly; required to assemble track group.

PR450, PR450C TRACK SHOES

6.125" (155.6 mm) PITCH -- 9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124
Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597
Rubber 14.0" (355 mm) 9N-4328 9N-4327

PR450, PR450C SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Rim (20 Tooth) 1 7X-9835
Nut 10 8T-7530

309
 Paving Products
PR450, PR450C

PR450, PR450C IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group 3 170-2501
Other Components (Per Idler GP)
Shaft 1 086-8712
Dowel 2 086-8706
Gasket 2 7R-2757
Bushing 2 7R-2758
Gasket 1 7R-2755
Plug 1 086-8710
Seal GP 2 7R-2756

PR450, PR450C TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 15 231-3079
Components of Group
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
Bearing 1 6Y-4744
Shaft 1 6S-3171
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Ring 2 6S-3172
Seal -- Duo-Cone Group 2 216-2957
Toric Ring 1 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
2
Mounting Hardware
Bolt 4 0S-1585
Washer 4 2M-0849
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

310
 Paving Products
PR750B, PR750C, PR1000, PR1000C

PR750B, PR750C, PR1000, PR1000C TRACK

6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALED PART
QUANTITY NUMBER
Link Assembly -- 32 Section 3 9W-2379
Track Links
RH Master 1 9K-0029
LH Master 1 9K-0028
RH Regular 31 9K-6629
LH Regular 31 9K-6628
Other Components
Pin 31 9K-4060
Master Pin 1 9K-4062
Bushing 31 9K-4061
Master Bushing 1 7K-2020
Seal (Spring Washer) 128 7K-2018
Spacer 2 9K-4059
Track Hardware 1
Bolt 128 7H-3597
Nut 128 1M-1408
1 Not part of link assembly; required to assemble track group.

PR750B, PR750C, PR1000, PR1000C TRACK SHOES

6.75" (171.5 mm) PITCH -- 5/8" BOLT

REGULAR
SHOE PART
TYPE WIDTH NUMBER
Triple Grouser 18.0" (460 mm) 5N-4313

PR750B, PR750C, PR1000, PR1000C SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly 1 7X-7248
Sprocket Rim (Weld On) (23 Tooth) 1 3T-9153
Nut 16 3K-0453

311
 Paving Products
PR750B, PR750C, PR1000, PR1000C

PR750B, PR750C, PR1000, PR1000C IDLERS (SPROCKET TYPE)

(PER MACHINE) QUANTITY PART NUMBER

Sprocket Assembly 3 8C-1149
Sprocket Rim (Weld On) (23 Tooth) 3 3T-9153
Other Components (Per Idler)
Shaft 1 9N-8381
Bearing Assembly 2 8T-4403
Retainer 2 8T-4506

PR750B, PR750C, PR1000, PR1000C CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 6 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Plate - Retainer 1 6K-9860
Bolt 2 6V-4791
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Washer 3 5M-2894
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 5H-8848
Seal -- Plug 1 1S-8947
Seal -- Shaft O-Ring 1 1H-9696
1 Component of preceding group; quantity shown is the quantity per group.

312
 Paving Products
PR750B, PR750C, PR1000, PR1000C

PR750B, PR750C, PR1000, PR1000C TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 12 118-1608
Components of Group
Roller Shell (SF) 1 9P-7782
Bushing Assembly 2 1V-9611
Shaft 1 118-1610
End Collar 2 118-1616
Bolt 12 2P-3201
Seal -- Duo-Cone Group 2 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Bushing O-Ring 2 1H-8128
Seal -- Shaft O Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware 2
Bolt 4 1A-1135
Washer 4 5P-8247
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

313
 Paving Products
AP650B, BG225C

AP650B, BG225C SEALED AND LUBRICATED TRACK

9DN504-UP, 5GN506-UP
6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 46 Section 2 222-2265
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 45 6Y-0935
LH Regular 45 6Y-0936
Other Components
Pin 46 154-3660
Bushing 46 111-1522
Seal Assembly (Rigid) 92 250-4002
Thrust Ring 92 6S-9049
Stopper 46 5G-2247
Plug 46 6Y-0473
Track Hardware 1
Bolt 184 8S-4745
Nut 184 7K-2017
Master Bolt 4 8S-4747
Lock Nut (To Retain Pad Assemblies) 92 2K-4821
1 Not part of link assembly; required to assemble track group.

314
 Paving Products
AP650B, BG225C

AP650B, BG225C TRACK

6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 46 Section 2 -1
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 45 6Y-0935
LH Regular 45 6Y-0936
Other Components
Pin 46 6B-5278
Bushing 46 6Y-1717
Seal (Spring Washer) 184 6S-3146
Track Hardware 2
Bolt 184 8S-4745
Nut 184 7K-2017
Master Bolt 4 8S-4747
Lock Nut 92 2K-4821
1 Upgrade to Sealed and Lubricated Link Assembly 222-2265.
2 Not part of link assembly; required to assemble track group.

AP650B, BG225C TRACK SHOES

6.125" (155.6 mm) PITCH -- 9/16" BOLT

TYPE WIDTH PART NUMBER

Rubber Bonded Pad Assembly 14.0" (355 mm) 132-1998
Plate Backing 14.0" (355 mm) 136-1090
Plate Backing (Master) 14.0" (355 mm) 136-1135

AP650B, BG225C SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket (25 Tooth) 1 105-8884
Bolt 20 8T-5042
Washer 20 8T-4123

315
 Paving Products
AP650B, BG225C

AP650B, BG225C IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group (Serviced as separate parts) 2 --
Components of Group
Idler Shell 1 5E-7938
Shaft Assembly 1 115-9254
Cup 2 006-7231
Cone 1 006-7232
Cone 1 4D-3882
Retainer 1 7R-0227
Cover 1 7R-0226
Lock 1 7R-0228
Seal 1 1J-4034
Bolt 3 8T-8917
Bolt 4 4M-0061
Washer 4 8T-4224

AP650B, BG225C CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6S-3609
Components of Group
Roller Shell 1 172-0160
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 4H-9527
Collar Assembly 1 1M-7918
Plate - Retainer 1 6K-9860
Bolt 5 0L-1351
Washer 5 3B-4506
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 4H-9628
Seal -- Shaft O-Ring 1 1H-9696
1 Component of preceding group; quantity shown is the quantity per group.

316
 Paving Products
AP650B, BG225C

AP650B, BG225C TRACK ROLLERS (FRONT)

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) (Serviced as separate parts) 8 --
Components of Group
Roller Shell 1 5E-7941
Cone 1 006-7232
Cup 2 006-7231
Cone 1 4D-3882
Retainer 1 7R-0227
Cover 1 7R-0226
Lock 1 7R-0228
Seal 1 1J-4034
Bolt 3 8T-8917
Bolt 4 4M-0061
Washer 4 8T-4224

AP650B, BG225C TRACK ROLLERS (REAR)

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 6 231-3079
Components of Group
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
1
Bearing 1 6Y-4744
Shaft 1 6S-3171
Ring 2 6S-3172
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal --- Duo-Cone Group 2 216-2957
Toric Ring 1 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
Mounting Hardware 2
Bolt 12 5P-2566
Washer 12 8T-4223
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

317
 Paving Products
AP1050B, BG245C

AP1050B, BG245C SEALED AND LUBRICATED TRACK

6ZN248-UP, 4XN148-UP
6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 50 Section 2 222-3058
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 49 6Y-0935
LH Regular 49 6Y-0936
Other Components
Pin 50 154-3660
Bushing 50 111-1522
Seal Assembly (Rigid) 100 250-4002
Thrust Ring 100 6S-9049
Stopper 50 5G-2247
Plug 50 6Y-0473
Track Hardware 1
Bolt 196 8S-4745
Nut 196 7K-2017
Master Bolt 4 8S-4747
Lock Nut (To Retain Pad Assemblies) 100 2K-4821
1 Not part of link assembly; required to assemble track group.

318
 Paving Products
AP1050B, BG245C

AP1050B, BG245C TRACK

6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 50 Section 2 -1
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 49 6Y-0935
LH Regular 49 6Y-0935
Other Components
Pin 50 6B-5278
Bushing 50 6Y-1717
Seal (Spring Washer) 200 6S-3146
2
Track Hardware
Bolt 196 8S-4745
Nut 196 7K-2017
Master Bolt 4 8S-4747
Lock Nut (To Retain Pad Assemblies) 100 2K-4821
1 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.
2 Not part of link assembly; required to assemble track group.

AP1050B, BG245C TRACK SHOES

6.125" (155.6 mm) PITCH -- 9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Pad 14.0" (355 mm) 132-1998 132-1998
Plate Backing 14.0" (355 mm) 136-1090 136-1135

AP1050B, BG245C SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (25 Tooth) 1 105-8884
Bolt 20 8T-5042
Washer 20 8T-4123

319
 Paving Products
AP1050B, BG245C

AP1050B, BG245C IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group (Serviced as separate parts) 2 --
Components of Group
Idler Shell 1 5E-7938
Shaft Assembly 1 115-9254
Cup 2 006-7231
Cone 1 006-7232
Cone 1 4D-3882
Retainer 1 7R-0227
Cover 1 7R-0226
Lock 1 7R-0228
Seal 1 1J-4034
Bolt 3 8T-8917
Bolt 4 4M-0061
Washer 4 8T-4224

AP1050B, BG245C CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 4 6S-3609
Components of Group
Roller Shell 1 172-0160
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 4H-9527
Collar Assembly 1 1M-7918
Plate - Retainer 1 6K-9860
Bolt 5 0L-1351
Washer 5 3B-4506
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 4H-9628
Seal -- Shaft O-Ring 1 1H-9696
1 Component of preceding group; quantity shown is the quantity per group.

320
 Paving Products
AP1050B, BG245C

AP1050B, BG245C TRACK ROLLERS (FRONT AND CENTER)

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) (Serviced as separate parts) 8 --
Components of Group
Roller Shell 1 5E-7941
Cone 1 006-7232
Cup 2 006-7231
Cone 1 4D-3882
Retainer 1 7R-0227
Cover 1 7R-0226
Lock 1 7R-0228
Seal 1 1J-4034
Bolt 3 8T-8917
Bolt 4 4M-0061
Washer 4 8T-4224

AP1050B, BG245C TRACK ROLLERS (REAR)

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) 8 231-3079
Components of Group
Roller Shell (SF) 1 6S-7038
Bushing Assembly 2 6S-3495
1
Bearing 1 6Y-4744
Shaft 1 6S-3171
Ring 2 6S-3172
End Collar 2 3T-4283
Thrust Washer 2 6S-7715
Seal --- Duo-Cone Group 2 216-2957
Toric Ring 1 2 216-2956
Seal -- Shaft O-Ring 2 7D-9749
Plug 1 9F-2247
Mounting Hardware 2
Bolt 12 5P-2566
Washer 12 8T-4223
1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.
2 These components are not included in the roller group; quantities shown are required to mount each roller.

321
 Paving Products
AP1050

AP1050 SEALED AND LUBRICATED TRACK

6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITY PART NUMBER

Link Assembly -- 50 Section 2 222-3058
Components of Link Assembly
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 49 6Y-0935
LH Regular 49 6Y-0936
Other Components
Pin 50 154-3660
Bushing 50 111-1522
Seal Assembly (Rigid) 100 250-4002
Thrust Ring 100 6S-9049
Stopper 50 5G-2247
Plug 50 6Y-0473
Track Hardware 1
Bolt 196 4K-7038
Nut 196 7K-2017
Master Bolt 4 5A-3187
1 Not part of link assembly; required to assemble track group.

322
 Paving Products
AP1050

AP1050 SEALED TRACK

6.125" (155.6 mm) PITCH -- 9/16" BOLT

SEALED PART
(PER MACHINE) QUANTITY NUMBER
Link Assembly -- 50 Section 2 -1
Track Links
RH Pin End Master 1 6Y-0937
LH Pin End Master 1 6Y-0938
RH Bushing End Master 1 6Y-0939
LH Bushing End Master 1 6Y-0940
RH Regular 49 6Y-0935
LH Regular 49 6Y-0936
Other Components
Pin 50 6B-5278
Bushing 50 6Y-1717
Seal (Spring Washer) 200 6S-3146
2
Track Hardware
Bolt 196 4K-7038
Nut 196 7K-2017
Master Bolt 4 5A-3187
1 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.
2 Not part of link assembly; required to assemble track group.

AP1050 TRACK SHOES

6.125" (155.6 mm) PITCH -- 9/16" BOLT

REGULAR
SHOE PART MASTER SHOE
TYPE WIDTH NUMBER PART NUMBER
Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124
Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597
Rubber Bonded 14.0" (355 mm) 9N-4328 9N-4327
Polyurethane Bonded 14.0" (355 mm) 1G-5515 1G-5516

AP1050 SPROCKETS

(PER SIDE) QUANTITY PART NUMBER

Sprocket Assembly (25 Tooth) 1 5E-7937
Bolt 16 8T-5042
Washer 16 8T-4123

323
 Paving Products
AP1050

AP1050 IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Group (Serviced as separate parts) 2 --
Components of Group
Idler Shell 1 5E-7938
Spindle Assembly 1 7R-0234
Cup 2 006-7231
Cone 1 006-7232
Cone 1 4D-3882
Retainer 1 7R-0227
Cover 1 7R-0226
Lock 1 7R-0228
Seal 1 1J-4034
Bolt 3 8T-8917
Bolt 4 4M-0061
Washer 4 8T-4224

AP1050 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6S-3609
Components of Group
Roller Shell 1 172-0160
Shaft 1 6K-9861
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 4H-9527
Collar Assembly 1 1M-7918
Plate - Retainer 1 6K-9860
Bolt 5 0L-1351
Washer 5 3B-4506
Bolt 2 6V-4791
Seal -- Duo-Cone Group 1 9W-5224
Toric Ring 1 2 1M-3097
Seal -- Cover 1 4H-9628
Seal -- Shaft O-Ring 1 1H-9696
1 Component of preceding group; quantity shown is the quantity per group.

324
 Paving Products
AP1050

AP1050 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Single Flange (SF) (Serviced as separate parts) 12 --
Components of Group
Roller Shell (SF) 1 5E-7941
Shaft 1 7R-0241
Cup 2 006-7231
Cone 1 006-7232
Cone 1 4D-3882
Retainer 1 7R-0227
Cover 1 7R-0226
Bolt 4 4M-0061
Washer 4 8T-4224
Seal 1 1J-4034
Plate Lock 1 7R-0228
Bolt 3 8T-8917

AP1050 TRACK ROLLERS (REAR)

(PER MACHINE) QUANTITY PART NUMBER

No Flange (NF) (Serviced as separate parts) 2
Components of Group
Roller Shell 1 125-7765
Shaft 1 7R-0241
Bearing 1 125-7766
Race 1 --
Bearing 1 --
Spacer 1 --
Retainer 1 125-7768
Cover 1 125-7769
Lock 1 7R-0228
Spacer 1 --
Spacer 1 --
Bolt 3 8T-8917
Bolt 6 9B-7237
Washer 6 8T-4896
Seal 1 4B-9371
Fitting 1 3B-8489
Seal (Rear) 1 129-8552
Screw 3 031-6100

325
 Paving Products
AP1055B BG2455C

AP1055B BG2455C DRIVE BELTS

(PER MACHINE) QUANTITY WIDTH PART NUMBER

Drive Belt (Wide) 2 18.0" (457 mm) 1R-1317

AP1055B BG2455C DRIVE WHEELS

(PER MACHINE) QUANTITY PART NUMBER

Wheel Assembly 4 1R-1124
Mounting Nut 1 12 111-8207
1 Quantities required per two wheel assemblies.

AP1055B BG2455C IDLERS

(PER MACHINE) QUANTITY PART NUMBER

Idler Assembly 4 120-7027
Mounting Stud 1 24 3V-4045
1
Mounting Nut 24 111-8207
1 Quantities required per two idler assemblies.

AP1055B BG2455C MID-ROLLERS

(PER MACHINE) QUANTITY PART NUMBER

Roller Assembly 20 1R-1198
1
Bolt 8 5C-9553
1
Nut 8 8T-4205
1 Quantities required per two roller assemblies.

326
 Product Information
INDEX

Product Information
MODELS PAGE NO.

LINK ASSEMBLIES.................................................................................................328
TRACK LINKS......................................................................................................... 329
TRACK PINS / TRACK BUSHINGS........................................................................ 331
TRACK SEALS........................................................................................................332
SPROCKETS.......................................................................................................... 334
TRACK SHOES.......................................................................................................335
TRACK HARDWARE.............................................................................................. 338
TRACK ROLLERS.................................................................................................. 340
CARRIER ROLLERS.............................................................................................. 345
IDLERS................................................................................................................... 346
GUARDS................................................................................................................. 347
PROPER TRACK SAG........................................................................................... 348
TRACK ROLLER FRAME EXTENSION................................................................. 349

327
 Product Information
LINK ASSEMBLIES

LINK ASSEMBLIES
Functions
• Provide a rail for the machine to run on.
• Provide a means to attach track shoes.
• Transmits driving force from track bushing to track shoe.
Requirements
• Flexible joints between sections.
• Matched wear and structural life of components.
• Components replaceable and/or reusable.
Sleeve Bearing Track
Features
• Assembled from components designed and manufactured to fit and work
together as a system.
• Pins, bushings and links resist loosening, cracking, and breaking until worn
beyond wear limits.
• Designed for a second wear life if proper maintenance and rebuilding
practices are followed.
Supporting Reference Material Available
• Sleeve Bearing Track Data Sheet (PEHJ0004)
• Grease Lubricated Track Data Sheet (PEHP9555)
• SystemOneTM Undercarriage Elevated Sprocket Machines (PEHJ0060)
• SystemOneTM Undercarriage Oval Track Machines (PEHJ0064) Grease Lubricated Track
• Positive Pin Retention Data Sheet (PEHP7025)
• Heavy Duty Track Data Sheet (PEHP5031)
• Rotating Bushing Track Data Sheet (PEHP5030)
• Sealed and Lubricated Track Data Sheet (PEDP0036)

Note: Sealed Track is not offered on elevated sprocket tractors.

SystemOneTM Track Positive Pin Retention Track Heavy Duty Track

Rotating Bushing Track Sealed and Lubricated Track Sealed Track

328
 Product Information
TRACK LINKS

TRACK LINKS
Rail
Functions
• Provide a continuous rail for rollers. Bushing
Bore
• Support weight of the machine.
Requirements
• Machined to close tolerances for pin, bushing and shoe retention.
• Long rail wear life.
Self-Locking
• Resist cracking, spalling and fatigue failures. Nut Seat
Pin Bore
• Rebuildable. Massive
Strut
Features
• Forged of Deep Hardening Steel. • Massive strut design.
• High body hardness. • Self-locking nut seats.
• Uniform rail hardness. • Rebuildable.
• High rail design.
Deep Hardening Steel
Deep Hardening Steel used in current links allows high body hardness, greater hardened depth and greater fatigue
resistance than plain medium carbon steel.
High Body Hardness
Links on current track-type tractors, loaders, and excavators have a high body hardness. This increases toughness,
durability, fatigue resistance and improves pin and bushing retention.

Uniform Rail Hardness

Link rails are pattern induction heated, spray water quenched and Hardened
furnace tempered for a deep, uniform hardened depth. This gives link Pin Depth
rails a crown hardness pattern that resists side wear and roll-over. The Boss
hardened rail matches the track roller tread and flange hardness for
optimum wear life.

High Rail Design

The high rail design link has more pin boss-to-roller flange clearance
(working clearance) than former links. This means longer link and roller
wear life potential. Body
Hardness
Rebuildability
Caterpillar track links are rebuildable; high body hardness results in good pin and bushing retention, even after
repeated disassembly and reassembly.

Massive Strut Design

Provides the best available resistance to cracking failures
that result from flexing shoes, pins, and bushings.
Self-locking Nut Seats
Allow easy installation and removal of track shoes. Also, help
keep hardware tight.
The nut and nut seat on “L”, “N”, “R”, and “T” series Self-Locking nut seat Mailbox Design
tractors are rounded to reduce stress risers in the link. Nut Seat

329
 Product Information
TRACK LINKS

SPLIT MASTER LINK

Function
• Allows convenient removal and installation of track.
• Eliminates the need for a master pin and master bushing.
Requirements
• Wear life equal to regular link.
• Same strength as regular link.
• Serviceable and Reusable.
Features
• Bolt-together design for faster and easier assembly and disassembly.
• Allows use of regular pins and bushings.
• Factory assembled with lubricant.
Bolt-Together Design
Removing and installing track has always been time consuming. To improve this, Caterpillar designed a two-piece or
split master track link, joined with bolts. Only a wrench is needed to separate the track in place of field press tooling.
Regular Pins and Bushings
Split master links require no master pins, master bushings, nor spacers. Instead they use standard pins and bushings.
Thus, pins and bushings in split master links wear at the same rate as all others and can be turned along with others.
NOTE: Split master links often require a master shoe, with different bolt hole pattern than other shoes and
four special track bolts.
MASTER LINK ASSEMBLING AND TORQUING PROCEDURE
1. Before installing the track, the point of connection for the master link must be clean and undamaged. Remove all
paint and rust from the point of connection.
2. Put 2P-2506 Thread Lubricant or 5P-3931 Anti-seize Compound on the bolt threads.
3. Put the master links together and check alignment of holes for the master bolts. Install one master bolt in each link.
The bolts must turn easily in the threads when turned by hand.
4. Remove the bolts. Install the master track shoe and all four master bolts.
5. Tighten the master bolts to the initial torque given below, plus 1/2 turn (D9L, D8L, D10T/R/N, D9T/R/N, D8T/R/N,
D7H S&L and D6R/H receive additional 1/3 turn rather than 1/2 turn).
Model Bolt Size Initial Torque
D11N, D11R 1-3/8-12 1100 ± 50 ft. lbs. 1500 ± 70 Nm
D10T, D10R, D10N, D10 1-1/8-12 650 ± 50 ft. lbs. 870 ± 70 Nm
D9T, D9R, D9N, D9L 1-14 650 ± 50 ft. lbs. 870 ± 70 Nm
D9H 1-14 400 ± 50 ft. lbs. 550 ± 70 Nm
D8T, D8R, D8N, D8L 7/8-14 480 ± 50 ft. lbs. 650 ± 70 Nm
D8K, 983, 973, D7R 7/8-14 250 ± 50 ft. lbs. 340 ± 70 Nm
D7H, D6H, D5H, D6M, D6R, D6N, 517, 527 3/4-16 300 ± 50 ft. lbs. 400 ± 70 Nm
D6D, 963, 955, D7G, 977, 973 3/4-16 220 ± 40 ft. lbs. 300 ± 50 Nm
D5G, 939, D4H, D5M HD/RBT, D4H, D5C, D4E, 943, 941, D5H, D5, 953, 951, D5M, D5N 5/8-18 120 ± 30 ft. lbs. 170 ± 40 Nm
D3, D4B, D4C, 931, 935, D3C, D4G, D3G 9/16-18 65 ± 15 ft. lbs. 90 ± 20 Nm

SystemOne™ LINK BOX

• Serviced at the Link Box level
• Contains two common links and two cartridges
• Track Links
• New rail design for increase wear life
• Stronger straight link design
• Forged of deep hardened steel that provides high body hardness, hardened depth and toughness
• Rail guided design for superior guiding
• Self-locking nuts
• Cartridge
• Factory sealed and welded to control end play
• Improved seal integrity through an innovative new sealing system
• Uses standard Caterpillar Synthetic SAE 75W-140 gear oil to lubricate the joint

330
 Product Information
TRACK PINS / TRACK BUSHINGS

TRACK PINS
Functions
• Help hold track section together.
• Act as hinge with bushing at adjoining section.
• Transfer loads between bushing and link. Sealed Track Pin
• Provide reservoir for lubricant in Sealed and Lubricated Track.
Requirements
• Strength — to resist flexing and cracking, even when worn to limit.
• Wear Resistant.
• Finished to close dimensions — for accurate press fit with link and Sealed and Lubricated
clearances with bushing I.D. Track Pin

Features
• Machined from medium carbon steel.
• Heat treated.
—Induction hardened.
—Spray water quenched.
—Tempered.
• Sealed and Lubricated Track pins ground to final dimensions.

MEDIUM CARBON STEEL

Caterpillar manufactures track pins from a medium carbon steel which provides a tough pin with good surface
hardness. This provides good spalling and cracking resistance in high impact conditions.
Sealed and Lubricated Track pins are center drilled to provide an oil reservoir and cross drilled to provide a passage
for the oil to flow between the pin and bushing. After heat treatment the pin ends are ground to provide the close final
dimensions required for accurate press fit and oil retention.
TRACK BUSHINGS
Functions
• Help hold track section together.
• Act as hinge with pin of adjacent section.
• Provide sealing surface to keep abrasives out and lubricant in with Sealed and Straight Wall
Lubricated Track.
Requirements
• Strength — to resist cracking, even when worn to service limits.
• Finished to close dimensions — for accurate press fit into link bushing bore
clearance with pin O.D.
• Wear resistant — on I.D. equal to pin, on O.D. greater than sprocket. Stepped
• Smooth finish on end — to maximize sealing and minimize seal wear.
Features
• Formed by cold extrusion of low carbon steel. (Extruded bushings have
smoother inner and outer surfaces with more uniform dimensions than machined
bushings.
• Carburized and heat treated for optimum hardness and toughness.
Difference between Sealed Track bushings and Sealed and Lubricated Track bushings
Sealed and Lubricated Track bushings are:
• Polished on the ends for a smooth sealing surface.
• Shorter than Sealed Track bushings to provide the space needed in the link counterbore for the thicker thrust ring
and seal.

331
 Product Information
TRACK SEALS

SEALED TRACK SEALS

Functions
• Retard abrasive entry between pin and bushing.
• Prevent bushing from wearing against link counterbore.
• Carry side loads.
Requirements
• Wear life equal to pin and bushing turn time.
• Have spring-like resiliency without brittleness.
Features
• Made from hardened and tempered spring steel.
Seals are formed like cone shaped washers. Used in pairs, they fit into
each link counterbore. One washer butts against the bushing end, the
other against the link counterbore base. When track sections are
pressed together, the washers flatten to form a seal. The spring effect
of the flattened washers maintains sealing pressure as they wear. Seals
are designed to wear against each other instead of against the link
counterbore and bushing end. This system extends internal pin and
bushing life by 20-30% compared to unsealed track. Sealed Track
Uncompressed Seals Compressed Seals
Seals are not reusable at turn time.
GREASE LUBRICATED TRACK SEALS
Internal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineers
have designed a track system that reduces internal pin and bushing wear on excavators. The sealing arrangement is
what makes this reduction possible.

Functions
• Keep abrasives out of internal pin and bushing joint.
• Keep grease in joint.
• Absorb side or thrust loads.
• Reduction in noise compared to Sealed Track.
Requirements
• Pin and Bushing internal wear life affected less by external
environment.
• Not a lifetime lubricated track.
Features
• Seal Assembly – Consists of a “W” shape polyurethane seal. The
seal contacts the smooth bushing end. The seal distributes an even
load along the sealing surface to assure a 360° seal.
• Seals are designed to operate at a maximum temperature of 70° C
(160° F). Exposure to high temperatures will reduce seal life.
• Shorter bushing compared to Sealed Track.
Benefits of Grease Lubricated Track
• Internal pin and bushing wear reduced as the primary maintenance consideration.
• The system keeps abrasives from entering the internal pin, bushing, and link counterbore area of the joint.
• Grease reduces normal friction and wear between the pin and bushing.
• Decrease of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on other
components, such as links, rollers, and guiding components.
• Most undercarriage components are reusable.
• Internal bushing life is extended about 20% compared to Sealed Track.

332
 Product Information
TRACK SEALS

SEALED AND LUBRICATED TRACK SEALS

Internal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineers
designed a track system that would eliminate internal pin and bushing wear as a maintenance consideration. The
sealing arrangement is what makes this possible.

Functions
• Keep abrasives out of internal pin and bushing joint.
• Keep lubricant in joint.
• Absorb side or thrust loads.
Requirements
• Pin and Bushing internal wear life not affected by external environment.
Features
• Seal Assembly — Consists of a plastic seal and resilient rubber load ring. The seal
contacts the smooth bushing end. The rubber load ring distributes an even load along the
sealing surface to assure a 360° seal.
Seals are designed to operate at a maximum temperature of 70° C (160° F). Exposure to
higher temperatures will reduce seal life.
• Greater end play capacity from .030 to .060.
• Thrust Ring — Made from hardened steel, it protects the seal assembly from side thrust
loads. The ring has notches so the oil can flow past the ring into the sealing areas.
• Rigid Seal Design now available for all Elevated Sprocket machines, Low Sprocket
machines, and Track Type Loader machines.

Benefits of Sealed and Lubricated Track

• Internal pin and bushing wear eliminated as the primary maintenance consideration.
Rigid Seal
• The system keeps abrasives from entering the internal pin, bushing, and link counterbore
area of the joint.
• Lubricant eliminates normal friction and wear between the pin and bushing.
• Absence of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on other
components, such as links, rollers and guiding components.
• Most undercarriage components are reusable.
• External bushing life is extended about 50% compared to Sealed Track.

Oil
• Caterpillar uses Synthetic SAE 75W–140 gear oil to lubricate the joint.

333
 Product Information
SPROCKETS

SPROCKETS

Function
• Transfer driving loads from the final drive to the track through the bushings.
Requirements
• Wear life — equal to at least one side of the bushing.
• Strength — to resist cracking.
BOLT-ON SEGMENTS
Used on: All Track-Type Tractors and Track-Type Loaders, but not available
for D4E or 941.
Features
• Formed from Deep Hardening Steel. Bolt-on Segments
• Both segments and sprockets are manufactured to accurately mate with
bushings.
• Tightly controlled manufacturing processes to ensure proper mounting segment hardware.
Benefits of Bolt-on Sprocket Segments
• Reduced maintenance and downtime.
• No need to remove track group to replace sprockets.
• Segments are easier to handle.
• No risk of misalignment.
• Reversible — switching segments to opposite sides of the machine can increase sprocket life.
Conversion to Bolt-on Sprocket Segments
A one-piece weld-on adapter ring is available for converting some older
models to bolt-on sprocket segments. Once a customer converts a machine to
the bolt-on design, he will save both labor and downtime cost when the
segments need replacing.
Torquing Procedure
Proper installation of sprocket segments is critical in preventing segment
loosening and subsequent loss/damage to other parts. Install segments using Cast Assembly and Weld-on Rim
the following guidelines:
1. Lubricate the bolt threads with 5P3931 Anti-Seizure Compound.
2. Make sure the washer is against the final drive hub (not segment).
3. Tighten all bolts to the following:
Model Initial Torque
D11R, D11N, D10T, D10R, D10N, D10 650 ft. lb. ± 50 ft. lb. (870 ±70 Nm)
D9T, D9R, D9N, D9L 480 ft. lb. ± 50 ft. lb. (650 ± 70 Nm)
D9H, D8K, 983 250 ft. lb. ± 50 ft. lb. (340 ± 70 Nm)
D8T, D8R, D8N, D8L, D7R, D7H, D7G, 977, 973 220 ft. lb. ± 40 ft. lb. (300 ± 55 Nm)
D6T, D6R, D6H, D6D, D5H, D5B, D4H, D5C, D5M, D6M, D5N, D6N, D6K 130 ft. lb. ± 30 ft. lb. (175 ± 40 Nm)
953B and 943, 963, 955, 939 130 ft. lb. ± 30 ft. lb. (175 ± 40 Nm)
953C 75 ft. lb. ± 15 ft. lb. (100 ± 20 Nm)
D3G, D4G, D4C, D3C, 935, 933, 931 50 ft. lb. ± 7 ft. lb. (70 ± 10 Nm)
4. Then tighten an additional 1/3 turn. This stretches the bolt properly for good retention.
CAST ASSEMBLY, WELD-ON, AND BOLT-ON RIM
Used on: Earlier Tractors, Earlier Loaders, and 200 Series Excavators. Current 300 Series Excavators have bolt-on one
piece sprockets.
Features
• Cast from Deep Hardening Steel.
Deep Hardening Steel
Caterpillar sprockets are formed from Deep Hardening Steel which allows about twice the hardened depth as plain
medium carbon steel.

334
 Product Information
TRACK SHOES

TRACK SHOES

Functions
• Support the machine’s weight on the ground.
• Provide traction.
Requirements
• Strength — to resist bending and breaking.
• Wear resistant grouser and plate.
• Retention — to resist loosening during link wear life.
Features
• Furnace or induction hardened, die quenched and tempered.
• Curved leading and trailing edge.
• Rebuildable
Curved leading and trailing edges provide stiffness to reduce shoe bending and hardware loosening. Overlapped edges
keep debris from lodging between shoes as the track bends around the sprocket and idler.

Track Shoe Selection

The wide variety of working conditions makes choosing the right shoe very important. A good rule is: choose the
narrowest shoe that provides adequate flotation. Shoes that are too wide will loosen, bend and crack more easily.
They require more power to turn, and affect maneuverability. Shoes of the correct width give maximum performance
and the lowest possible cost to the entire system.

Cat offers the following track shoes:

SINGLE GROUSER MODERATE SERVICE SHOES (MS)

The Moderate Service shoe is the best shoe for low to medium impact and
abrasive conditions. It gives the best penetration and traction, resists wear and
bending and is available in various widths and modifications. Rolled from
modified medium carbon steel. Single Grouser Shoe

SINGLE GROUSER EXTREME SERVICE SHOES (ES)

Extreme Service shoes should be used wherever the Moderate Service shoe bends or breaks, or where links outlast
shoes. Extreme Service shoes are both stronger to resist bending and breaking and have more allowable wear material
than the Moderate Service shoe. Greater Strength – Extreme Service shoes are rolled from tough alloy steel. They are
also more massive. They are heat treated to provide a higher tensile strength to resist bending and breaking in high
impact conditions. More Wear Material – Extreme Service shoes have up to
approximately 50% more allowable wear material than the respective
Moderate Service shoe. More Rebuildable – Because of the thicker section on SES
the Extreme Service shoe, it can be successfully regrousered more times than ES
the Moderate Service shoe (when used in similar conditions and worn to
comparable limits). MS

SINGLE GROUSER SUPER EXTREME SERVICE SHOES (SES)

Super Extreme Service shoes provide approximately 25% more life than the
Extreme Service in high wear applications.

335
 Product Information
TRACK SHOES

MULTI-GROUSER SHOE (Triple and Double Grouser)

Multi-Grouser shoes have less penetration and traction than Single Grouser shoes,
but better turning ability. These shoes are standard on track-type loaders and
excavators because less turning resistance and greater maneuverability are needed.
By spreading tractor weight over the larger contact area of several low profile
grousers, the turning resistance is reduced and maneuverability improved. Triple Grouser

Double Grouser

SPECIAL SHOES

Self-Cleaning, Low Ground Pressure Shoe

This shoe is designed for use in loose, muddy conditions. As these shoes move
around the sprocket and idler, they separate from one another, causing debris to fall
out. These cast steel shoes come in widths that make them suitable for LGP
machines only and should not be used in high abrasive or high impact conditions. Low Ground Pressure Shoe

Chopper
This shoe is designed for use in demolition and landfill applications where
compaction is required. Designed with a full length front grouser, two angled side
grousers and a center opening for material extrusion, these shoes provide long wear
life and structural life in the most demanding underfoot conditions.

Chopper Shoe

Steel Mill Flat

Designed for use in hot slag and other heavy abrasive materials where low
penetration and high wear and bending resistance is required. Large, countersunk
bolt holes are designed to protect the bolt heads.

Steel Mill Flat

TRACK SHOE SUPPORTS FOR HYDRAULIC EXCAVATORS

Forestry applications for Hydraulic Excavators generally involve high impact and severe underfoot conditions for
the undercarriage components. For this reason, full length track shoe supports mounted to the track roller frame are
recommended for forestry applications. These shoe supports are intended to limit the torsional loads experienced
by the link assembly when the machine encounters uneven underfoot conditions.
As the machine rides over objects such as rocks or stumps, the track shoe deflects and the track chain begins to twist.
With track shoe supports, the shoes contact the support and prevent further twisting of the chain. These supports limit
the loads going into the link assembly and significantly reduce the occurrence of link cracking and track pin walking.

336
 Product Information
TRACK SHOES

TRACK SHOE DATA

Grouser Plate
Height Thickness
Model Type inch mm inch mm
D11R, D11N ES 3.98 101.0 .96 24.5
D10T, D10R, D10N ES 3.66 93.0 .81 20.5
SES 3.98 101.0 .88 22.5
D10 MS 3.66 93.0 .81 20.5
ES 3.98 101.0 .88 22.5
D9T, D9R, D9N MS 3.03 77.0 .65 16.5
ES 3.31 84.0 .75 19.0
SES 3.66 93.0 .83 21.0
D9L MS 3.07 78.0 .75 19.0
ES 3.66 93.0 .83 21.0
D9H MS 3.43 87.0 .69 17.5
ES 3.66 93.0 .81 20.5
SES 3.98 101.0 .88 22.5
D8T, D8R, D8N, D8L MS 3.07 78.0 .65 16.5
ES 3.31 84.0 .75 19.0
SES 3.66 93.0 .83 21.0
D8K MS 3.03 77.0 .65 16.5
ES 3.07 78.0 .75 19.0
SES 3.66 93.0 .83 21.0
D7H, D7R, D7G MS 2.76 70.0 .56 14.2
ES 2.81 71.5 .67 17.0
D6T, D6H, D6R, 527, D6D MS 2.56 65.0 .51 13.0
ES 2.95 75.0 .59 15.0
D5H, D6M, 517, D6N MS 2.24 57.0 .51 13.0
ES 2.60 66.0 .55 14.0
D5B MS 2.25 57.2 .50 12.7
D4H, D5C, D5M, D5N, D6K MS 1.89 48.0 .43 11.0
ES 2.24 57.0 .51 13.0
D4E, D5C, D5G MS 1.88 47.0 .44 11.2
ES 2.25 57.2 .50 12.7
D3, D4B, D4C, D3C MS 1.85 47.0 .33 8.50
D3G, D4G ES 2.10 53.5 .39 10.0
983 DG 1.75 44.5 .75 19.0
977, 973 DG 1.93 49.0 .61 15.5
955, 963 DG 1.67 42.5 .55 14.0
TG 1.06 27.0 .59 15.0
951, 953 DG 1.48 37.5 .51 13.0
TG .96 24.5 .51 13.0
939, 941, 943 DG 1.46 37.0 .43 11.0
931, 933, 935 SG 1.85 47.0 .33 8.50
TG .61 15.5 .39 10.0
5130 DG 2.91 74.0 1.1 28.0
375/385B/5080/5090B DG 1.89 48.0 .81 20.5
ES 3.66 93.0 .81 20.5
365B DG* 1.89 48.0 .81/.75 20.5/19.0
350 ES 3.07 78.0 .75 19.0
DG 1.75 44.5 .75 19.0
TG* 1.34 34.0 .61/.55 15.5/14.0
345B ES 2.81 71.5 .67 17.0
DG 1.93 49.0 .61 15.5
TG* 1.34 34.0 .61/.55 15.5/14.0
330 ES 2.81 71.5 .67 17.0
DG 1.93 49.0 .61 15.5
TG* 1.18 30.0 .51/.43 13.0/11.0
TG (HD) 1.34 34.0 .67 17.0
325, 320S ES 2.95 75.0 .59 15.0
DG 1.67 42.5 .55 14.0
TG* 1.1 28.0 .51/.43 13.0/11.0
TG (HD) 1.06 27.0 .59 15.0
324/323/322/321/320/319 ES 2.6 66.0 .55 14.0
DG 1.38 35.0 .51 13.0
TG* 1.02 26.0 .39/.33 10.0/8.5
TG (HD) 1.1 28.0 .49 12.5
318/317/315 TG* 1.02 26.0 .39/.33 10.0/8.5
TG (HD) 1.1 28.0 .49 12.5
314/313/312/311 TG 1.0 25.0 .37 9.50
308/307B/307 TG* .79 20.0 .37/.31 9.5/8.0
MS — Moderate Service SES — Super Extreme Service TG (HD) — Triple Grouser (Heavy Duty)
ES — Extreme Service DG — Double Grouser TG — Triple Grouser
* Two track shoe section offered (only plate thickness different)

337
 Product Information
TRACK HARDWARE

TRACK BOLTS

Function
• Hold the shoe on the link.
Requirements
• Wear resistant head.
Rolled Threads
• Tensile and shear strength.
Features
• Induction hardened heads.
• Rolled threads.
• Tensile strength exceeds Grade 8 specifications.
• Reusable
Induction Hardened Heads
Track bolt heads are induction hardened to protect them from deforming in high impact, highly abrasive conditions to
extend their wear life.

Rolled Threads
Rolled threads resist stripping better than cut threads. By rolling, the natural flow lines of the steel follow the thread
contours. Cutting threads cut the flow lines, making the threads weaker.

Strength
Caterpillar track bolts exceed Grade 8 strength requirements with a minimum tensile strength of 160,000 PSI.

TRACK NUTS
Function:
• Used with the track bolt to hold the shoe to the link.
Requirements
• Strength
• Retention on bolt.
Features Square Nut Design Mailbox Nut Design
• Furnace hardened and tempered.
• Self-locking.
Furnace hardened
Track nuts are thru-hardened and tempered to match or exceed bolt strength. Track nut core hardness is Rc30
minimum.

Self-locking
Track nuts are designed to fit into the nut seats in the link strap area. Broached grooves hold the nut so bolts can be
removed from the shoe.

338
 Product Information
TRACK HARDWARE

TRACK SHOE TIGHTENING PROCEDURE

To insure that track hardware is properly tightened, follow the procedure outlined below:
1. Remove paint from track link and pad mating surfaces.
2. Lubricate the bolt threads and bolt washer faces.*
3. Tighten the bolts to the specified torque.
4. Give each bolt an additional 1/3 turn.
* Requires 5P3931 anti-seize compound or 2P2506 thread lubricant.
Initial torque draws the parts together tightly. An additional 1/3 turn gives the bolt proper stretch for good retention.
Stretching stresses the bolt to insure that the bolt’s maximum clamping force is used. (See Split Master Link section
for split master link bolt tightening procedure.)

BOLT TORQUE CHART

Socket Size Bolt Diameter
Model inch mm inch mm Initial Torque*
D11R, D11N, 5130 2 1/16 — 1 3/8 — 1100 ± 50 ft. lbs. (1500 ± 70 Nm)
D10T, D10R D10N, D10 1 11/16 — 1 1/8 — 650 ± 50 ft. lbs. (870 ± 70 Nm)
D9T, D9R, D9N, D9L 1 1/2 — 1 — 650 ± 50 ft. lbs. (870 ± 70 Nm)
D9H, 245 1 1/2 — 1 — 400 ± 50 ft. lbs. (540 ± 70 Nm)
D8T, D8R, D8N, D8L 1 5/16 — 7/8 — 480 ± 50 ft. lbs. (650 ± 70 Nm)
D7R, D7H HD/RBT, D8K, 983, 235, 973 1 5/16 — 7/8 — 250 ± 50 ft. lbs. (340 ± 70 Nm)
517, 527, D7H, D6H, D5H HD/RBT, D7R, D6R, D6T,
D6M HD/RBT, D6N HD/RBT 1 1/8 — 3/4 — 300 ± 50 ft. lbs. (400 ± 70 Nm)
D7G, D6D, 977, 973, 963, 955, 235 1 1/8 — 3/4 — 220 ± 40 ft. lbs. (300 ± 50 Nm)
D5N, D5M, D5H, D5G, D5C, D5B, D4H, D4E,
953, 951, 943, 941, 215, 225, 213, 211, 205, 939 15/16 — 5/8 — 120 ± 30 ft. lbs. (170 ± 40 Nm)
D4G, D3G, D4C, D3C, D3, D4B, 931, 935, 213, 211, 205 7/8 — 9/16 — 65 ± 15 ft. lbs. (90 ± 20 Nm)
MS1600 — 50 — 33 650 ± 50 ft. lbs. (870 ± 70 Nm)
385B/5090 — 41 — 30 675 ± 70 ft. lbs. (900 ± 100 Nm)
375/5080, 365B — 41 — 27 410 ± 50 ft. lbs. (550 ± 70 Nm)
E650, MS650, MS580, 345B — 32 — 24 480 ± 50 ft. lbs. (650 ± 70 Nm)
350, 345B, 330, E450, MS580, MS450, MS380 — 32 22 370 ± 50 ft. lbs. (500 ± 70 Nm)
325, 324, 323, 322, 321, 320, 319, 318, 317, 315, E300,
E240, E200, 320S, MS300, MS280, MS240, MS230 — 30 — 20 300 ± 50 ft. lbs. (400 ± 70 Nm)
E180, MS180 — 27 — 18 190 ± 40 ft. lbs. (260 ± 50 Nm)
314, 313, 312, 311, E140, E120, E110, MS160,
MS140, MS120, MS110 — 24 — 16 130 ± 30 ft. lbs. (180 ± 40 Nm)
308, 307, MS90, MS70L — 22 — 14 70 ± 15 ft. lbs. (95 ± 20 Nm)
307, E070 3/4 1/2 165 ± 15 ft. lbs. (220 ± 20 Nm)
* Plus an Additional 1/3 Turn

SystemOne™ BOLT TORQUE CHART

Bolt Diameter
Model mm Initial Torque*
D6T/R/H, 963 22 370 ± 50 ft. lbs. (500 ± 70 Nm)
D6N/M, 953C/B, D5H 20 300 ± 50 ft. lbs. (400 ± 70 Nm)
D6K, D5N/M 18 220 ± 50 ft. lbs. (300 ± 50 Nm)
D5G/C, D4H 16 110 ± 30 ft. lbs. (145 ± 40 Nm)
D4G/C, D3G/C 16 110 ± 30 ft. lbs. (145 ± 40 Nm)
* Plus an Additional 1/3 Turn

339
 Product Information
TRACK ROLLERS

TRACK ROLLERS

Functions
• Support the machine on the track.
• Guide the machine along the track.
Requirements
• Strength — to resist structural failure before tread wear life is utilized.
• Shell tread wear life equal to links
• Shell tread and flanges rebuildable.
• Most internal components reusable.
• No maintenance during original tread wear life.
Features
• Shells forged from deep hardening steel and are designed to resist bellmouthing.
• Shafts and bearings are designed to reduce friction and wear and to provide maximum strength.
• Lifetime Lubricated for minimum maintenance.
• Bronzed Sleeve Bearing
• Sleeve design provides a large surface area for better load distribution.
• Inner diameter surface is polished to a smooth finish.
• Soft bronze coating in the bearing absorbs any small foreign particles before they can damage the shaft and seals.
• Duo-Cone Seal
• Seals oil in and abrasives out.
• The Duo-Cone Seal consists of two metal seal rings and two rubber toric rings. The toric rings provide the
proper pressure to both sides of the metal seal rings.
• Resists permanent deformation and temperature changes from -40° F (-40° C) to 225° F (107° C). Extreme
Temperature Seals respond over a wider temperature range from -60° F (-50° C) to 325° F (163° C) constant and
450° F (233° C) peak.
• Duo-Cone Seals are designed to last through several roller shell tread lives, depending on individual conditions.
For reusability guidelines, refer to SEBF8511 (Guidelines for Reusable Parts).
• Oil
• Caterpillar Lifetime Lubricated Track Rollers use a 30 weight oil, which cools and lubricates better than grease.
Caterpillar track-type tractors and loaders use both single and double flange rollers. Typically excavators use all single
flange rollers. Single flange rollers are used adjacent to the sprocket so they can be placed closer to the sprocket.
Double flanged rollers are used to maximize the guiding effect wherever space permits.
SystemOne™ TRACK ROLLERS
• Serviced at Roller Group level
• Single flange roller shell
• Forged from deep hardened steel and through hardened heat treated for internal strength to resist bellmouthing
and uniform hardened depth that provides wear life equal to link wear life
• Through hardened flanges to resist wear and prevent cracking or breakage
• Tall flange rollers for superior guiding
• Track Roller Shaft
• Forged and heat treated for strength
• Bearing surfaces are hardened and polished to reduce friction and wear
• End Caps
• Retain the roller shaft to the track roller frame and provides serviceability
• Not part of the roller group and serviced separately

340
 Product Information
TRACK ROLLERS

The unique characteristics of the four roller designs are as follows:

For D11R, D11N, D10, D10T, D10R, D10N, D9T, D9R, D9N, D9L, D8T, D8R, D8N, D8L
Track Roller Shell
• Forged from Deep Hardening Steel and heat treated for internal strength
to resist bellmouthing and to increase rebuildability.
• 2-piece roller shell rim
• Heat treated for a deep, uniform hardened depth that provides wear life
equal to link wear life.
• Thru-hardened flanges to resist bending and improve rebuildability.
• Steel-backed bronze bearings are press fit inside the shell.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Larger diameter for greater load bearing capacity.
Retainer
• Bolts to the ends of the track roller shells.
• Transmits side loads to the roller shaft and houses the Duo-Cone Seals.
End Caps
• End caps retain the roller shaft to bogies, and provide serviceability.
• End caps are serviced separately.

For D7R, D7H, D6R, D6H, D6N, D6M, D5H, D5N, D5M, D4H 973, 963, 953, 943
Track Roller Shell
• Forged from Deep Hardening Steel and heat treated for internal strength to resist
bellmouthing and to increase rebuildability.
• 2-piece roller shell rim
• Heat treated for a deep, uniform hardened depth that provides wear life equal to
link wear life.
• Thru-hardened flanges to resist bending and improve rebuildability.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Center flange absorbs side thrust from roller shell.
Cast Iron Bushing
• Supports the bronze sleeve bearing.
• Cast from iron to absorb loads without permanent deformation.
• Large lubricant reservoir to reduce heat build-up.
End Collar
• Attaches the track roller to the track roller frame.
• Houses and protects the outer Duo-Cone Seal.
Snap Ring Design
• Retain cast iron bushing.
• Eliminates need to use bolts to retain cast iron bushing.

341
 Product Information
TRACK ROLLERS

For Excavators
Track Roller Shell
• 2-piece roller shell rim.
• Forged from deep hardening steel and heat treated for internal strength to resist bellmouthing.
• Heat treated for a deep, uniform hardened depth that provides good wear life.
• A large oil reservoir is provided for in the shell and is filled through a threaded hole located between the wear
surfaces.
• Steel-backed bronze bearing is press fit inside the shell.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Large diameter for a greater load bearing capacity.
• Straight, solid shaft, with a hole in each end to provide positive attachment of the
end collar.
• Reduces end play growth.
End Collar
• Completely encircles the shaft to give added strength. Connected to the shaft by pins. Mounting surface area is
larger for improved bolt retention.

For Low Sprocket D9H, D8K, D7G, D6D, D5G, D5C, D5B, D4E, D4B,
D4G, D3G, D4C, D3C, D3 and 983, 977, 955, 951, 941, 939, 935, 933, 931
Track Roller Shell
• Forged from Deep Hardening Steel and heat treated for internal strength to
resist bellmouthing and to increase rebuildability.
• 2-piece roller shell rim.
• Heat treated for a deep, uniform hardened depth that provides wear life equal
to link wear life.
• Thru-hardened flanges to resist bending and improve rebuildability.
Track Roller Shaft
• Forged and heat treated for strength.
• Bearing surfaces are hardened and polished to reduce friction and wear.
• Center flange absorbs side thrust from roller shell.
Cast Iron Bushing
• Supports the bronze sleeve bearing.
• Cast from iron to absorb loads without permanent deformation.
• Large lubricant reservoir to reduce heat build-up.
End Collar
• Attaches the track roller to the track roller frame.
• Houses and protects the outer Duo-Cone Seal.

342
 Product Information
TRACK ROLLERS

Track Roller Sequence

Use the following charts to determine the original position of track rollers, identified by their flange type. The letter D
represents a Double flange roller and the letter S represents a Single flange roller.

ELEVATED SPROCKET MACHINES

Rollers
Model Per Side Roller Position
D11R/N*, D10T/R/N*, D10* 8 S S D D D D S S
D9T/R/N*, D9L 8 S S D D D D S S
D8T/R/N*, D8L* 8 S S D D D D S S
D7R/H STD & LGP 7 S D S D S D S
D7R/H XR 8 S D S D D S D S
D6T/R/H STD 6 S D S D S S
D6H XL & XR 7 S D S D S D S
D6T/R/H XW & XL 7 S D S D S D S
D6T/R/H LGP 8 S D S D D S D S
D6N/M XL, D5H TSK & XL 7 S D S D S D S
D5H STD 6 S D S S D S
D6N/M LGP, D5H LGP 8 S D S D D S D S
D5M D4H STD, D5N/M XL, D4H XL 7 S D S D S D S
D5M LGP, D4H LGP & TSK 7 S D S D S D S
D5N/M LGP, D4H LGP 8 S D S D D S D S
527 517 Skidders 7 S D S D S D S
527 517 Skidders 8 S D S D D S D S
572R, 561M, 561H 7 S D S D S D S
578 8 S S D D D D S S
583R 9 D D D D D D D D D
589 10 S S D D D D D D S S
* Machines with large diameter single flange rollers.

SystemOne™ Track Roller Sequence:

For elevated sprocket machines all rollers are single flange. Rollers per side are the same as in the table above.

343
 Product Information
TRACK ROLLERS

LOW SPROCKET TRACTORS AND LOADERS

Rollers Roller Position
Model Per Side F 2 3 4 5 6 7
D9G & H 7 D D S D S D S
D9D, E & G 7 D D S D S D S
D8H & K 7 D D S S D D S
D8H 6 D S D S D S
D8NC (8.00" Pitch) 7 D D S D S D S
D7E, F & G 6 D S D S D S
D7 LGP 7 D D S D S D S
D7NC (8.00" Pitch) 5 S D S D S
D6C & D 6 D S D S D S
D6B & D6NC 6 S D D D D S
D6 LGP 7 D D S D S D S
D6K 7 S S S S S S S
D5C 6 S D S S D S
D5 & D5B 6 S D D S D S
D5 LGP 7 S D D S D D S
D4G XL LGP, D5C XL LGP, D5G XL LGP 7 S D S D S D S
D4B, D4B LGP, D4C, D4C LGP 6 S D S S D S
D4D & E, LGP 5 D D S D S
D4NC 4 S D D S
D3, D3 LGP, D3B, D3C 5 S D S D S
D3B LGP, D3C LGP, D3G XL LGP 6 S D S S D S
D3 Special LGP 7 D D S S D S S
D2 4 S D D S
983 7 D D S D S D S
973 7 S D D S D D S
977E, H & K 7 D D S D S D S
977D & No. 6 7 S D D D D D S
955K, L & LGP, 963 6 S D D S D S
955H 6 S D D D D S
955F, E & C 5 D D S D S
953, 943 6 S D S S D S
951A 5 D S D S D
951B 5 S D S D S
951 LGP 5 S D S D S
941 incl. LGP, 933E & F 5 D D S D S
933C, 933*, 939 6 S D S S D S
931 incl. LGP, 935 5 S D S D S
* New design.

SystemOne™ Track Roller Sequence:

For low sprocket tractors and loaders all rollers are single flange. Rollers per side are the same as in the table above.

344
 Product Information
CARRIER ROLLERS

CARRIER ROLLERS

Functions
• Support the track as it moves between the sprocket and idler.
• Guide the track between the sprocket and idler.
Requirements
• Strength — to resist failure before tread wear life is utilized.
• Tread wear life matched to track links.
• Treads and flanges rebuildable on forged shells
Carrier Roller Group
• Most internal components reusable.
• No maintenance required during tread wear life.

CARRIER ROLLER SHELL

Carrier rollers have shells forged from Deep Hardening Steel for strength, wear life and rebuildability.

Caterpillar carrier rollers used Duo-Cone Seals for maintenance free operation.

Features
• Heat treated shells for body strength and long wear life.
• Shaft and bearings designed to carry and turn with heavy track weight.
• Lifetime Lubricated for minimum maintenance.
Note
D8T and larger track-type tractors use a single flange track roller group as the carrier roller.

345
 Product Information
IDLERS

IDLER ASSEMBLY

Functions
• Guide the track in and out of the track rollers.
• Intermittently support the machine’s weight.
• Provide a way to control track slack and tension.
Requirements
• Strength to resist failure before tread wear life is utilized.
• Tread wear life equal to or greater than link wear life to service limits.
• Treads and center flanges rebuildable.
• No lubricant maintenance during original tread wear life.
Features
• Tread hardness similar to links, track rollers and carrier rollers for impact strength and balanced wear life.
• Lifetime Lubricated for minimum maintenance.
• Rebuildable tread.
Caterpillar offers cast, forged, and fabricated idler designs. The cast idler designs are hollow and single web. The
fabricated idler designs are straight side plate and curved side plate, each using a rolled tread and flange section.
Internal reinforcing plates provide added strength.

All Caterpillar idlers have Duo-Cone Seals for Lifetime Lubrication. The idler needs no oil addition until it is rebuilt
or replaced at wear limits. Idler treads may be rebuilt several times. Internal idler components, such as shaft and
bearings are generally reusable.

Straight Side Plate Curved Side Plate Center Tread Idler (CTI) Typical Cast/Forged Idler Cast Idler

Fabricated Idlers

IDLER TYPES

Model Type Model Type

D11R/N Cast D5G, D5C, 939 Forged
D10T/R/N Cast D5B, 225 Fabricated
D10 Cast D5N, D5M, D4H Cast & Fabricated
D9T/R/N Cast D4E, 215 Fabricated
D9L Cast D3G, D4G, D3, D4B, D4C Forged
D9H Fabricated 983 Fabricated
D8T/R/N Cast 977 Fabricated
D8L Cast 973 Fabricated
245 Cast 963 Fabricated
D8K, 245 Fabricated 955 Fabricated
D7R/H Cast & Fabricated 951 Fabricated
D7G, 235 Fabricated 953 Fabricated
D6T/R/H Fabricated 943 Fabricated
D6D, 227 Fabricated 941 Fabricated
D6N, D6M, D5H Fabricated 931, 933, 935 Forged
D6K Sprocketed All Center Tread Idlers (CTI) Cast

346
Product Information
GUARDS

347
Product Information
PROPER TRACK SAG

PROPER TRACK SAG – MACHINES WITHOUT CARRIER ROLLERS

Model Inches mm
D11R, D11N, D10 6.5" ± .40" (165 mm ± 10 mm)
D10T, D10R, D10N, D9L, 589 6.1" ± .40" (155 mm ± 10 mm)
D9T, D9R, D9N 5.1" ± .40" (130 mm ± 10 mm)
D8T, D8R, D8N, 578, 583 T/R 4.5" ± .40" (115 mm ± 10 mm)
D8L 5.5" ± .40" (140 mm ± 10 mm)
D7R, D7H LGP, 527R 5.0" ± .40" (127 mm ± 10 mm)
D7R, D7H, D6T, D6R, D6H, 527 4.5" ± .40" (115 mm ± 10 mm)
517, D5H, D4H, 561M/H 3.9" ± .40" (100 mm ± 10 mm)

PROPER TRACK SAG – MACHINES WITH CARRIER ROLLERS

Model Inches mm
D11R, D11N, D10 3.0" ± .40" (75 mm ± 10 mm)
D10T, D10R, D10N, D9L, 589 2.8" ± .40" (70 mm ± 10 mm)
D9T, D9R, D9N 2.6" ± .40" (65 mm ± 10 mm)
D8T, D8R, D8N, 578, 583T/R 2.6" ± .40" (65 mm ± 10 mm)
D8L 2.6" ± .40" (65 mm ± 10 mm)
D7R, D7H, D7R/D7H LGP, 572R 2.6" ± .40" (65 mm ± 10 mm)
D6T, D6R, D6H, 527 2.2" ± .40" (55 mm ± 10 mm)
D6N, D6M, D5H, D6N/D6M/D5H LGP, 517 2.2" ± .40" (55 mm ± 10 mm)
D5N, D5M, D4H, 561M/H 1.4" ± .40" (35 mm ± 10 mm)

PROPER TRACK SAG – HYDRAULIC EXCAVATORS

Inches mm
Model Min Target Max Min Target Max
All 200-Family series excavators 1.0 1.3 1.5 25.0 32.5 40.0
All E-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.0
All 300-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.0
5080, 5090B, 5130, 5130B, 5110B 1.6 1.85 2.1 40.0 47.5 55.0

PROPER TRACK SAG –

SystemOne™ MACHINES WITH CARRIER ROLLERS*

Inches mm
Model Min Target Max Min Target Max
D6T/R/H, D6N/M, D5H 1.6 1.80 2.0 40 45 50
D5N/M, D4H 1.0 1.40 1.8 25 35 45
* If excessive track jumping occurs, run the track adjustment to the minimum side of track sag range, and/or change
or upgrade to new recoil spring.

348
 Product Information
TRACK ROLLER FRAME EXTENSION

Track Roller Frame Extension Specifications

Machines with and without carrier rollers

Maximum Length of Exposed Tube

Model (Serial Number Range) Inches mm
D11R (AAF) (7PZ) (9TR00202-UP) 7.8" (198 mm)
(9XR00154-UP)
D11R, D11N 7.0" (178 mm)
D10T (RJG), D10R (AKT) 7.3" (186 mm)
(3KR1331-UP), D10
D10N (2YD1-515)) 5.8" (148 mm)
D10R (3KR1-1330), D10N (2YD516-UP) 6.8" (173 mm)
D9T (RJS), D9R (ACL) (ABK) 7.0" (178 mm)
(8BL1422-UP) (7TL1212-UP)
D9R (8BL1-1421) (7TL1-1211), D9N) 5.9" (150 mm)
D9L, D8L, 589 6.5" (165 mm)
D8R (7XM1-5093), D8N (9TC) (5TJ) 5.6" (142 mm)
D8T D8R, 583T/R (7XM5094-UP) 6.0" (152 mm)
(6YZ) (KPZ)
D8N, 578 (9TC) (5TC) 5.6" (142 mm)
D7R - STD, XR 5.4" (136.5 mm)
D7R - LGP 572R 5.4" (136.5 mm)
D7H - STD, XR 5.0" (127 mm)
D7H - LGP 5.0" (127 mm)
D6T - STD 5.8" (147.5 mm)
D6T - XL/XW/IG 5.7" (144.2 mm)
D6T - LGP 5.6" (142.5 mm)
D6R - STD (2YN1-544) (3ZN1-763) 6.2" (156.8 mm)
D6R - STD (2YN545 & UP) 5.8" (147.5 mm)
(3ZN764 & UP) (AFM) (AEM)
D6R - XR (6JN1-415) (7KN1-450) 6.2" (156.8 mm)
D6R - XR (6JN416& UP) (7KN451 & UP) 5.8" (147.5 mm)
D6R - LGP (8LN1-528) (9PN1-1578) 6.0" (151.8 mm)
D6R - LGP (8LN529 & UP) 5.6" (142.5 mm)
(9PN1579 & UP) (ACJ) (ADE)
D6R - XL (4MN1-503) (5LN1-2765) 6.0" (153.5 mm)
D6R - XL (4MN504 & UP) (5LN2766 & UP) 5.7" (144.2 mm)
D6R - XW 5.7" (144.2 mm)
D6H - STD, XR 6.4" (161.8 mm)
D6H - LGP, 527 6.2" (156.8 mm)
D6H - XL 6.0" (153.5 mm)
D6M/N - XL 4.0" (102.4 mm)
D6M/N - LGP 4.3" (108.2 mm)
D5M/N - XL 3.6" (91.7 mm)
D5M/N - LGP 3.5" (88.5 mm)
D5H, 517 4.4" (112 mm)
D4H, 561H/M 3.9" (100 mm)

349
350
 Conversion Guide
INDEX

Conversion Guide
MODELS PAGE NO.

DETERMINING COMPETITIVE UNDERCARRAIGE CONVERSIONS.................. 352

LINK ASSEMBLY.................................................................................................... 353
TRACK SHOE......................................................................................................... 356
SPROCKET.............................................................................................................357
TRACK ROLLERS.................................................................................................. 359
CARRIER ROLLERS.............................................................................................. 362
IDLERS................................................................................................................... 363

351
 Conversion Guide
DETERMINING COMPETITIVE UNDERCARRAIGE CONVERSIONS

DETERMINING COMPETITIVE UNDERCARRIAGE CONVERSIONS

To identify which Cat components can be used, and if modifications are required, to convert any track type
machine to Cat undercarriage components, refer to the following guidelines:

• Refer to guidelines on the following pages to determine what dimensions should be collected on the
competitive machine to make a complete or partial conversion to Cat undercarriage.

• Use Conversion Report Form/Work Sheet PEEP0210, to collect dimensional data.

• Refer to IRM UC96-12, titled "Caterpillar Undercarriage Components Dimension Guide". This guide provides
information to compare the dimensions of the competitive undercarriage with Caterpillar undercarriage
components for conversion purposes.

352
 Conversion Guide
LINK ASSEMBLY

LINK ASSEMBLY
Primary Dimensions
Pitch — A A
F
Bushing O.D. — B
Rail Spread
Inside — C
Outside — D B E
G H
Secondary Dimensions
Link Height — E C
Pin Length — F D
I
Rail to Pin Boss — G
Rail to Bushing — H
Bolt Size — I
Other Considerations
Number of Sections

PRIMARY DIMENSIONS
The primary dimensions are the critical dimensions to determine if a Cat
link assembly can be used with the OEM sprocket and/or OEM rolling
components. Compare measurements to Cat link assembly dimensions,
refer to IRM UC96-12. If measurements are within the ranges shown then
the Cat link assembly may be used with the OEM sprocket and/or rollers.
If measurements and Cat link dimensions are different, or conversion to
Cat sprockets and/or rollers is desired, sprocket and/or roller
measurements must also be taken.

Pitch — A A
Purpose: Determines OEM sprocket compatibility with Cat track.
Range: ±.03" (.76 mm)
Method: Track pitch (A) is the distance between pin centers in adjacent
track sections. Track pitch can be determined by measuring the
distance from one side of the pin to the same side of the pin in
the adjacent section.
When measuring to determine OEM pitch on worn link
assemblies, you will need to adjust for an increase in track pitch
due to internal wear.

353
 Conversion Guide
LINK ASSEMBLY

Bushing Outer Diameter (O.D.) — B

Purpose: Determines OEM sprocket compatibility with Cat track.
Range: -.12" (3.04 mm) without modifications
±.12" (3.04 mm) with modifications B

Method: The bushing outer diameter measurement should be taken

across the unworn horizontal centerline of the bushing.
In cases where the competitive track bushing is of smaller
diameter than the Cat track bushing, and where the competitive
sprocket must be used, the new competitive sprocket root
should be ground out to properly accommodate the larger
diameter bushing. This grinding should be done with the
sprocket held in a fixture to achieve uniform profile and pitch.
Failure to grind out the difference in radius can result in
mismatch and accelerated bushing wear. Normal break-in .06" (1.50 mm)
cannot be expected to relieve the difference without some
detrimental wear.

Rail Spread
Inside — C
Outside — D

Purpose: Determines OEM rolling component compatibility with OEM

Cat track.
Range: Inner — .0" to +.19" (4.83 mm)
Outer — -.19" (4.83 mm) to +.0" C
D

Method: The inside and outside rail spreads can be measured as shown
at below. CAT
Note: As link assemblies wear, there will be a slight change of
rail spread. It does not significantly affect measured
dimensions.Y

OEM

354
 Conversion Guide
LINK ASSEMBLY

SECONDARY DIMENSIONS
The secondary dimensions are less critical. Although they rarely prevent a conversion, modifications may be
necessary in order to protect a complete Caterpillar undercarriage system.

E
G H

C
D
I

Link Height — E
Purpose: Determines if machine height will be raised or lowered and affects number of sections required.

Pin Length — F
Purpose: Determines if pin will clear guards or other machine parts.

Rail to Pin Boss — G

Purpose: Determines material available for wear.

Rail to Bushing — H
Purpose: Determines if link will clear idler, roller flanges, and provide maximum wear material without sacrificing
guidability, number of sections required.

Bolt Size — I
Purpose: Bolt sizes need to be equivalent to ensure use of competitive shoe and proper fastener strength.

OTHER CONSIDERATIONS
Number of Sections
The number of Cat track sections required should be determined from the number used on the competitive machine at
the time of conversion.

Assuming the sprockets and rolling components maintain relatively constant placement and sizes, the following
procedure is usually accurate enough to determine the number of Cat sections required.

OEM Pitch (New) x No. Sections Currently

No. Sections of Cat =
Cat Pitch

Example: Calculations for converting a competitive 7.50" pitch 36-section machine to Caterpillar 8.00" pitch track
are as follows:

7.50" x 36 = 270 total inches of chain required on this machine. 270" ÷ 8.00" or 33.75 or 34 sections of Caterpillar 8.00"
pitch track required for conversion.

If link height and/or rail to pin boss clearance increases a large amount, the preceding formula may lead to a link
assembly that is too short.

355
 Conversion Guide
TRACK SHOE

TRACK SHOE
A
Primary Dimensions
Bolt Hole Spacing — A
— B
— C
D B
Bolt Size — D

Bolt Hole Spacing — A, B, C

Purpose: Determines interchangeability of track shoes. C
Range: .0"
Method: There are two methods of measuring shoe bolt spacing:
1. Measure a track shoe, by measuring from one side of a bolt hole to the same point of the hole adjacent
2. Measure an assembled track group, by measuring from the center of the bolt head to the center of the
adjacent bolt

Bolt Size — D
Purpose: Determines reuse of track shoes and/or track hardware.
Range: .0"

Other Considerations
The shoe leading and trailing edges must maintain proper clearance, especially if link pitch changes, to allow proper
assembly and operation.

356
 Conversion Guide
SPROCKET

SPROCKET
Primary Dimensions
Tip Diameter — A
Root Diameter — B
Inner Diameter — C
Other Considerations
Offset
Segment Hardware

PRIMARY DIMENSIONS
Use these dimensions to determine if a Caterpillar sprocket can be used on the competitive machine.
Tip Diameter — A
Purpose: Determines if machine interference will result from using Cat sprocket.
Range: Not Specified
Method: Measure the overall diameter of the sprocket. It may be helpful to mark the center of the hub or axle.
Then, using a 12" ruler extended from the tooth tip measure to the hub center with a tape measure.
The most accurate sprocket measurements can be obtained after the track has been removed from the
machine. Either too large or too small tip diameter can result in track or sprocket interference with other
machine components.

Root Diameter — B
Purpose: Determines if sprocket will carry machine weight.

Range: Not Specified A C B

Method: Measure the diameter of the (estimated) unworn sprocket roots. The
track bushings must increase elevation such that at the six o’clock
sprocket position the bushing is above the level that it left the last
roller.

It may be necessary to use spacer plates on the competitive track roller frame to increase ground clearance
when using a larger diameter Cat sprocket. This should lift the track roller frame at the bottom entry
position. Spacers may be fabricated from 1030 or 1020 steel. Full length spacer plates are recommended
and bolts should be checked for tightness at regular intervals.

SPACER PLATE

Inner Diameter — C
Purpose: Determines if there is adequate space and geometry for welding.
Range: Not Specified

Method: Measure the area that will facilitate welding. Use same procedure described above.

357
 Conversion Guide
SPROCKET

OTHER CONSIDERATIONS
Offset
The Caterpillar rim or adapter ring and segments may have a different offset than the OEM design. Failure to
compensate for the offset will result in sprocket-link interference.
Whether you use an adapter ring or a weld-on rim, the inner diameter must allow proper mounting and orientation on
the competitive sprocket “hub.”
When welding, the sprocket teeth must be in line with the track roller center line and the rim or segments must be
clear of all other parts.

CUT 1/2" LARGER

THAN INNER DIAMETER WELD
OF WELD ON ADAPTER CATERPILLAR
WELD ON ADAPTER

TAPER
WELD

OEM
SPROCKET HUB

HUB

WELD ADAPTER
TAPER

OFFSET ON THE HUB TO

CENTER SEGMENTS
CUT 1/2" WELD WITH ROLLER
LARGER

SEGMENTS

Segment Hardware
Any additional clearances needed for segment hardware must be considered, especially if the sprocket runs close to
final drive housings, guards, etc.

358
 Conversion Guide
TRACK ROLLERS

TRACK ROLLERS
Primary Dimensions E G

Tread Diameter — A
Tread
Inside — C A

Outside — D
I B
Mounting Width — E
Roller Frame to Tread Surface — I
Width Between Bolt Centers — F C H
Bolt Hole Spacing — H D

F
Other Considerations
Flange Diameter — B
Bolt Size — G
Roller Spacing

PRIMARY DIMENSIONS
Use these dimensions to determine if Caterpillar link assemblies will fit on the
competitive track rollers.
Tread
Inside — C CAT
Outside — D
C
Purpose: Determines Cat link assembly compatibility with OEM track rollers. D
Range: Outside — .0" to +.19" (4.83 mm)
Inside — .19" (4.83 mm) to +.0"
OEM
Method: Measure from inside flange to inside flange and outside flange to
outside flange. Measurements from worn rollers will result in slightly
inaccurate dimensions. If clearances appear to be close compensation
for wear may be needed. Note: Be sure to compare these
measurements to the link assembly intended for use in the
conversion.

359
 Conversion Guide
TRACK ROLLERS

Use these dimensions to determine if Caterpillar track rollers can be used on the
competitive machine. OEM ROLLER
FRAME

Mounting Width — E
Purpose: Determines if Cat rollers will fit in OEM frame.
Range: -.10" (2.54 mm) to +.0" (.0 mm) E
Method: Measure the OEM track roller frame and compare to Dimension E on
the Cat roller.
Note: Failure to maintain a clearance between the roller frame and CAT
roller end collar vertical faces may cause roller damage.

Roller Frame to Tread Surface — I

Purpose: Determines if Cat roller lowers or raises machine.
Range: Depends on roller wear limits, idler and sprocket placement.
Method: Differences in tread diameter or end collar design can result in slightly
raising or lowering overall height of machine. This can cause track
interference with frame, guards or cause sprocket to carry some machine
weight. Frame to tread surface (Dimension I) should be measured and CAT
any potential interference compensated for as necessary on a case by
I
case basis. If required, roller frame spacers can be used.

360
 Conversion Guide
TRACK ROLLERS

Width of Bolt Centers — F

Bolt Spacing — H
Purpose: To determine use of existing bolt pattern.
Range: ±.01" (.254 mm)
Method: Measure from the center to center point of bolts in track roller
frame. For comparison, use Caterpillar dimensions as reference.
If patterns are not within range, plugging, drilling, and tapping
of the competitive roller frame may be needed.
F

OTHER CONSIDERATIONS

Flange Outer Diameter

Two points to check are (1) roller flange to link pin boss clearance, and (2)
roller flange and track frame interference. H

Bolt Size
If bolt size and tread type are similar, reuse of competitive hardware may
be possible.

Roller Spacing
If the Cat roller selected has different tread, flange diameters and/or roller
frame to tread surface dimensions, be sure to compensate for these to
prevent idler/sprocket interference, especially on the front and rear roller.

Shaft and End Collar Design

(flat shaft mounting vs. round shaft mounting)
For example, Cat D8 and D9 size track rollers utilize a full round shaft
mounting which requires a saddle type cutout in the roller frame
(Illustration B). D8 size roller conversion can use 983 rollers which do
mount flat as in Illustration A. However, D9 roller conversion will require
a roller frame saddle arrangement.

ROLLER FRAME ROLLER FRAME

SIMILAR TO CAT
D8 & D9
FULL ROUND SHAFT FLAT SHAFT

ILLUSTRATION B ILLUSTRATION A

361
 Conversion Guide
CARRIER ROLLERS

CARRIER ROLLERS
A D
Primary Dimensions
Tread Inside — A
Tread Outside — B
Shaft Outer Diameter — C C
Reference Dimension — D

Other Considerations
Shaft Mounting Length — E B E
Dowel
Spacing
Size

PRIMARY DIMENSIONS
Use these dimensions to determine if Caterpillar link assemblies can be used on the competitive carrier roller.
Tread
Inside — A
Outside — B

Purpose: Determines link assembly compatibility with carrier rollers.

Range: Inside — .19" (4.83 mm) to +.0"
Outside — .0" to +.19" (4.83 mm)
Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from worn
rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensation for wear
may be needed. Note: Be sure to compare these measurements to the link assembly intended for use in the
conversion.
Use these dimensions to determine if Caterpillar carrier rollers can be used on the competitive machine.

Shaft Outer Diameter — C

Purpose: Determines compatibility of Cat roller shaft with competitive carrier roller holder.
Range: As small as competitive roller holder will hold. As large as competitive roller shafts.
Method: Measure competitive shaft with calipers, compare to Cat roller; if Cat roller is smaller, a sleeve may be
fabricated to compensate for small diameter.
Reference Dimensions — D
Purpose: Determines compatibility of Cat carrier roller with competitive carrier roller holder and link assembly.
Range: ±.10" (2.54 mm) depends on tread inside and competitive holders.
Method: Measure from radius to holder to determine reference dimension. The reference dimensions assure proper
carrier roller alignment with the link assembly.

OTHER CONSIDERATIONS
Shaft Mounting Length — E
The Cat carrier roller shaft may have a longer or shorter shaft mounting length, providing it does not interfere with
the holder or other components.
Dowel Spacing and Size
The dowel spacing and size may need to be moved or resized; many times this is accomplished by drilling new holes
in the competitive holder.

362
 Conversion Guide
IDLERS

IDLER
Primary Dimensions
Tread Diameter — A
Tread Inside — B D
TreadOutside — C
Mounting Shaft Diameter — D

Other Considerations
A
Slide Plate Profile

B
C

PRIMARY DIMENSIONS
Use these dimensions to determine if Caterpillar link assemblies can be used on the competitive idlers.

Tread Diameter — A

Purpose: Determines link assembly compatibility with idler.

Range: Slightly smaller than OEM up to OEM diameter.
Method: Measure the diameter; compensate for wear as much as possible.
Tread
Inside — B
Outside — C

Purpose: Determines link assembly compatibility with idler.

Range: Inside — .19" (4.83 mm) to +.0"
Outside — .0" to +.19" (4.83 mm)
Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from worn
rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensation for wear
may be needed. Note: Be sure to compare these measurements to the link assembly intended for use in the
conversion.
Use these dimensions to determine if Caterpillar carrier rollers can be used on the competitive machine.

Mounting Shaft — D

Purpose: Determines use of OEM mounting block.

Range: Same shaft O.D., same mounting arrangement.
Method: Compare Cat shaft O.D., length and mounting type with competitive idler. Modification to OEM mounting
block may permit use of Cat idler.

OTHER CONSIDERATIONS
Side Plate Profile
Some manufacturers use guards that run close to idler side plates; modification may be needed to avoid interference.

363
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
002-1212 291, 292 093-0502 238, 239, 243 093-1927 231
006-7231 316, 317, 320, 321, 324, 093-0508 228 093-1929 231
325
093-0509 231 093-1935 12, 218
006-7232 316, 317, 320, 321, 324,
325 093-0510 248 093-1943 228

006-8663 289 093-0511 251 093-1944 228

031-6100 325 093-0515 10, 218 093-1945 228

031-9099 168, 181 093-0517 10, 218 093-1946 231

053-2294 305, 306 093-0520 228 093-1947 231

085-4972 246 093-0521 231 093-1949 243

085-4973 246 093-0522 238, 239, 243 093-1950 243

085-5519 220 093-0523 248 093-1951 243

085-6273 218 093-0524 251 093-1952 243

085-7456 253 093-1364 13, 14, 303 093-1969 10, 218

085-8893 273, 280 093-1410 220 093-1970 10, 218

085-9311 240 093-1411 226, 229 093-1977 228

085-9768 284 093-1413 232, 240, 245 093-1978 228

086-3096 250 093-1414 13, 14, 221, 303 093-1979 231

086-8706 310 093-1415 219 093-1980 238, 239, 243

086-8710 310 093-1416 249, 252 093-1981 238, 239, 243

086-8712 310 093-1418 244, 249, 250 093-1984 251

086-9627 307 093-1420 252, 253 093-1985 251

086-9722 307 093-1693 232, 240 093-1997 228

086-9723 307 093-1694 244 093-1998 228

087-8805 237 093-1695 249 093-1999 231

087-8806 237 093-1696 229 093-2000 231

093-0036 10, 218 093-1697 225 093-2005 238, 239, 243

093-0037 17, 20, 21, 22, 222, 223 093-1699 252 093-2006 238, 239, 243

093-0041 228 093-1701 219 093-2011 251

093-0042 231 093-1736 246 093-2012 251

093-0043 238, 239, 243 093-1837 229 093-2015 228

093-0044 248 093-1839 219 093-2027 221

093-0045 251 093-1841 246 093-2949 220

093-0233 250 093-1843 244 093-4324 221

093-0245 247 093-1844 225, 227, 230 093-4333 220

093-0259 222, 223, 228, 233, 241 093-1845 232 093-5459 221

093-0261 222, 223, 228 093-1846 221 093-6391 246

093-0262 231 093-1847 249, 250 093-6937 229

093-0264 231 093-1848 240 093-6938 229

093-0265 242 093-1849 233, 241 093-6946 226, 229

093-0266 238, 239, 243 093-1887 17, 19, 21, 22, 222, 223 093-6951 226, 229

093-0268 248 093-1888 228 093-6962 228

093-0271 251 093-1889 228 093-6963 228

093-0319 228 093-1890 231 093-7788 225

093-0320 231 093-1891 231 093-8747 227, 230

093-0321 238, 239, 242, 243 093-1892 248 093-8748 227, 230

093-0323 251 093-1893 248 093-8749 227, 230

093-0329 246 093-1894 251 093-9275 241

093-0394 250 093-1895 251 093-9308 231

364
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
093-9871 244 095-1658 219, 220 096-2143 10, 218
093-9886 246 095-1659 16, 220, 303 096-2144 218, 219
094-0548 232, 240 095-1662 24, 225 096-4255 114
094-0563 232, 240, 245 095-1663 220, 232, 235, 240, 245 096-4279 29, 34, 42, 50, 70
094-1384 240 095-1673 253 096-4280 235
094-1388 233, 241 095-1674 249, 252 096-4327 234
094-1782 233, 241 095-1681 226 096-4883 279, 281
094-2491 244 095-7099 233, 241 096-5251 239
094-2576 244 095-7100 225 096-5252 238, 239, 243
094-3708 249 095-7119 238, 239, 243 096-5253 238, 239, 243
094-3709 99, 109, 114 095-7120 238, 239, 243 096-5256 238, 239, 243
094-3729 249 095-7123 239 096-5257 238, 239, 243
094-3731 249 095-7130 231 096-5258 238, 239, 243
094-4829 253 095-7138 233, 241 096-5259 238, 239, 243
094-4831 252 095-7412 231 096-5260 232, 240, 245
094-4846 251 095-7643 252 096-6771 220
094-6105 249 095-7944 57, 67, 77, 78, 79, 92, 93 096-6783 303
094-6112 250 095-7962 278 096-7011 248
094-6113 250 095-8026 249 096-7033 5, 6, 7, 8, 9, 10, 11, 218,
302
094-6114 249 095-9779 240
096-7698 230
094-6115 249 096-0094 242
096-8047 229
094-6133 248 096-0231 22, 223, 228
096-8135 228
094-6386 232, 240, 245 096-0233 218
096-9296 273
094-6390 246 096-0240 22, 223
096-9944 248
094-6391 246 096-0241 242
096-9945 248
095-0818 219 096-0244 242
096-9946 248
095-0819 233, 241 096-0245 252
096-9947 248
095-0820 247 096-0251 252, 253
096-9956 238
095-0863 17, 18, 19, 20, 21, 22, 26, 096-0253 244
27, 32, 33, 37, 38, 39, 40, 099-0008 250
44, 45, 47, 63, 64, 222, 096-0256 243
223, 234, 236, 237 099-0009 250
096-0257 243
095-0867 242, 248 099-0032 248
096-0260 251
095-0928 232, 240, 245 099-0046 243
096-0263 242
095-0966 220, 221, 226, 227, 230 099-0156 225
096-0264 242
095-0967 233, 235, 241, 246, 250 099-0157 24, 225
096-0300 252
095-0990 284, 285 099-0159 24, 225
096-0305 253
095-1277 15 099-0160 24
096-0309 252
095-1533 221 099-0163 24
096-0310 251
095-1541 15, 219 099-0182 225
096-0330 245
095-1545 225, 227, 230 099-0183 24, 225
096-0332 245
095-1549 232, 240 099-0185 24, 225
096-0551 238, 239
095-1551 244 099-0187 225
096-0586 248
095-1553 249 099-0193 25, 226
096-0655 227, 230
095-1557 252 099-0194 25
096-0883 229, 232, 240, 246
095-1578 246 099-0195 25, 226
096-1043 228
095-1595 277, 278 099-0219 224
096-1479 224
095-1600 13, 14, 219, 284, 303 099-0653 17, 19, 20, 21, 22, 222, 223
096-2052 233, 241
095-1657 280 099-1460 235
096-2142 10, 218

365
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
099-1461 235 106-0458 210 113-5902 137
099-2658 242 106-0614 48, 67 113-5903 137
099-2668 233, 241 106-0615 48, 67 113-5905 138
099-3220 224 106-0616 48, 67 113-5912 138
099-4129 244 106-1618 46, 257 115-0605 198
099-4150 247 106-1625 46, 257 115-1853 57, 67, 77, 78, 79
099-4329 221 106-1626 46, 257 115-1854 57, 67, 77, 78, 79
099-4347 227 106-1627 46, 257 115-3696 59, 69, 84, 258, 259
099-4739 24 106-1628 46, 257 115-3697 59, 69, 84, 85, 258, 259,
263
099-5200 253 106-1629 46, 257
115-3699 98, 99
099-5554 242 106-1630 46, 257
115-3701 28, 34, 41, 49
099-5996 242 106-1642 46, 257
115-4926 28, 34, 41, 235
099-5998 242 106-8237 184
115-4931 69, 70
099-5999 242 107-0356 135
115-5198 12
099-6008 242 107-0669 120
115-5756 11
099-6461 15, 219 107-0719 46, 257
115-6335 14
099-6462 15 107-1036 136
115-6336 14
099-6463 15, 219 107-3953 119, 122, 127
115-6337 69
099-6469 220 108-2187 295, 296, 297, 298, 299
115-6338 69
099-7241 246 108-4605 113
115-6359 121
099-7447 247 109-0861 118, 121
115-6370 99, 109
099-7644 253 109-0868 99, 109, 114
115-7471 59, 69, 84, 85, 258, 259
099-7646 253 109-0881 98, 99, 115, 266, 269
115-9254 316, 320
100-3205 136 109-0885 59, 69, 70, 84, 85, 258,
259, 263 116-6702 189, 190, 205
101-2160 123, 127
110-3118 136 117-1371 26, 27, 32, 40, 47, 63, 64,
101-2162 123 234, 237
110-3119 136
101-7402 277 117-1372 26, 27, 32, 33, 39, 40, 44,
111-0104 31 45, 47, 63, 64, 234, 237
102-0883 126
111-0105 31 117-3068 198
102-8072 10, 218
111-0106 30, 36 117-4855 12
102-8073 10, 218
111-1522 314, 318, 322 117-5418 75
102-8077 10, 218
111-2414 296, 299 117-5553 36, 43, 75
102-8079 15
111-2415 296, 299 117-5612 61, 62, 89, 90
102-8082 13, 14, 303
111-8207 326 117-8880 11, 302
102-8084 13, 14, 303
112-9951 59, 69, 84, 85, 258, 259, 117-8881 9, 11, 302
102-8107 10, 218 263
102-8108 10, 218 117-8882 9, 11, 302
113-0693 295, 296, 297, 298, 299
102-8115 15, 16, 303 117-8883 9, 11, 302
113-1047 131
102-8116 15, 16, 303 117-8884 11, 302
113-2907 28, 34, 41, 49
102-8134 28, 33, 41 117-8885 9, 11, 302
113-4189 12
102-8150 12 118-1608 166, 180, 313
113-5880 134
102-8152 98, 266, 269 118-1610 166, 180, 313
113-5883 134
102-8155 59, 85 118-1611 179
113-5890 135
104-8170 232 118-1613 179
113-5891 135
105-3484 272 118-1614 190, 205
113-5894 135
105-5013 304 118-1616 166, 180, 313
113-5896 135
105-6203 123 118-1617 189
113-5899 137
105-6324 103, 104, 112 118-1623 204
113-5900 137
105-8884 315, 319 118-7302 92, 93
113-5901 137

366
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
118-7303 92, 93 125-7768 325 133-3776 109
119-4553 61, 62, 89, 90 125-7769 325 133-3843 109
119-4554 61, 62, 89, 90 125-7878 131 134-7697 12
120-4660 284, 285 125-7879 131 135-8903 114
120-7027 326 125-9380 129 135-8904 121
121-0133 40, 48, 67 125-9381 129 135-8920 114
121-0134 48, 67 125-9382 129 136-0296 15, 16, 303
121-0135 48, 67 125-9383 129 136-0297 15, 16, 303
121-0137 83 125-9384 129 136-0351 23
121-0138 83 126-4968 130 136-1090 315, 319
121-0140 97 126-4969 130 136-1135 315, 319
121-0141 97 126-4970 130, 134 136-2393 15
121-5394 133 126-4971 130, 134 136-2394 15
121-5395 133 126-4975 130, 134 136-2400 11
121-7351 130 126-4976 130, 134 136-2401 5, 6, 7, 8
121-7371 130 126-4977 130, 134 136-2402 5, 6, 7, 8
121-7373 130 126-5061 27, 33, 40, 48 136-2403 8
122-0216 205 126-5062 27, 33, 40, 48 136-2404 5, 6, 7, 8
123-0025 92, 93, 94, 95 126-5063 27, 33 136-2405 5, 6, 7, 8
123-0026 92, 93, 94, 95 126-5064 83 136-2407 5, 6, 7, 8
123-1186 216 126-5065 83 136-2408 5, 6, 7, 8
123-1191 216 126-5066 97 136-2409 6, 8
123-1216 129 126-5067 97 136-2410 5, 6, 7, 8
123-1227 130 126-5304 58 136-2422 98
123-1256 131 126-5305 58 136-2429 118
123-1273 131 127-0159 131 136-2446 118
123-1382 110, 111 127-0181 131 136-3056 109
123-1813 10 127-0204 131 136-3057 109
123-5540 123 127-3804 15, 16, 303 136-3847 98, 266, 269
123-5541 123 127-3805 15, 16, 303 137-4123 40, 47, 63, 64
123-5554 123 127-3806 15, 16, 303 137-4124 57, 58, 78, 79, 80, 81
123-5555 123 127-3807 16 137-4125 92, 93, 94, 95
124-3296 109 127-4834 264, 267, 270 137-6114 22
124-7276 110 129-8552 325 137-9518 305, 306
124-7278 110 130-4499 112 138-8388 121
124-7280 110 130-5333 108, 192, 193 138-8389 114
124-8237 308 130-5334 108, 192, 193 139-0246 97
124-8238 308 130-6606 109 139-4304 272
124-8248 308 130-9285 72 139-6261 273
124-8468 133 130-9326 12 139-6270 272
124-8469 133 131-7083 136 139-6343 278
124-8470 133 131-7239 308 139-6364 272
124-8473 133 132-1951 308 139-6411 283
124-9978 99, 109 132-1998 315, 319 140-3048 103, 104, 112
124-9979 99, 109 132-3546 302 140-4005 278
125-3250 305, 306 132-5794 104 140-4008 278
125-7765 325 133-2504 102 140-4022 277
125-7766 325 133-2554 25, 227 140-4313 281, 286

367
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
140-4314 281, 286 150-4768 108 158-4683 275, 276
140-4338 279, 280 150-4769 108 158-4684 275, 276
141-2697 118 150-4770 108 158-4712 286
141-3245 302 150-4780 97 158-4713 286
141-9655 117 150-7865 262, 263 158-4714 286
142-1803 116, 117 150-7866 263 158-4765 286
142-1804 116, 117 151-4742 268 158-4766 283
142-1806 117 151-9747 25 158-4767 282, 283
142-4412 138 151-9748 25 158-4768 282, 283
142-4413 138 152-4140 102 158-4769 282, 283
142-4414 138 152-4142 115 158-4770 282, 283
143-0746 129 152-4144 122 158-4771 282, 283
143-4891 92, 93, 94, 95, 113, 265 152-4147 115 158-4772 282, 283
144-0805 116, 117 152-4149 122 158-4773 282, 283
144-0806 116, 117 152-8069 257 158-4774 282, 283
144-8598 117 152-8070 46 158-4775 282, 283
144-8602 117 152-8071 66, 82, 83, 261, 262 158-4776 282, 283
145-2295 119 152-8555 264, 267, 270 158-4777 283
145-2948 11 152-8558 265 158-4795 284
145-2949 8 152-8570 267, 270 158-7908 111, 115
145-2950 11 152-8628 68, 257 158-7910 122
145-2951 8 153-1624 111 158-7913 111
145-2952 8 153-5981 282 158-7915 115
145-2953 8, 11 153-5982 274 158-7918 122
145-2970 117, 125 153-5985 276 158-8086 60, 61, 71, 72, 73, 74, 86,
87, 88, 260, 264
145-3018 13 154-3660 314, 318, 322
158-8087 101, 102
145-9320 113 155-4102 135
158-8089 60, 88
146-0984 278 155-4103 135
158-8090 101, 102
146-0985 278 155-4105 135
158-8096 60, 71, 72, 86, 87
146-6062 274 155-4106 135
158-8097 101, 102
146-6064 279 155-4107 138
158-8098 111, 115
146-9174 19 155-4109 138
158-8099 122
146-9175 19 155-4111 138
159-0049 15, 111, 115
147-0423 19 155-4112 138
159-0050 122
147-8495 23 155-6844 283
159-0950 33, 39, 44, 45
148-3095 119 155-7420 108
159-8346 130
148-3111 119, 127, 128 157-1606 111
159-8347 134
148-3533 100, 101, 102, 266, 267, 158-4380 26, 27, 32, 33, 37, 38, 39,
269, 270 44, 45, 63, 64, 236 159-9526 60, 61, 71, 72, 73, 74, 86,
87, 88, 260, 264
150-0392 136 158-4381 26, 27, 32, 33, 37, 38, 39,
44, 45, 63, 64, 236 159-9527 101, 102
150-0394 136
158-4675 276 160-6631 100, 101, 102, 266, 267,
150-0396 136 269, 270
158-4676 275, 276
150-4419 19 160-9756 305
158-4677 275, 276
150-4741 96, 97, 105, 106, 107, 268 160-9757 305
158-4678 275, 276
150-4742 96, 97, 105, 106, 107 160-9761 305
158-4679 275, 276
150-4764 108 161-6304 48, 67
158-4680 275, 276
150-4766 108 161-6305 68, 83
158-4681 275, 276
150-4767 108 161-7247 305
158-4682 275, 276

368
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
161-7249 305 170-2501 310 176-4879 6
162-2166 201 171-5713 61, 71, 73, 74, 88, 118, 176-5331 110, 111, 115, 130, 134
121, 126, 260, 264
162-2168 30, 35, 42, 43, 54 176-5332 119, 122, 127
171-5714 126
162-4304 17, 20, 21 176-5333 110, 111, 115, 130, 134
171-5811 118, 121, 126
162-4305 17, 20, 21 176-5334 119, 122, 127
171-5825 126
162-4306 17, 20, 21 176-7524 127
171-5882 201
162-4307 17, 20, 21 176-8618 253
171-5897 135
162-5610 133 178-2543 138
171-5898 138
162-5611 133 178-2545 138
171-5899 138
162-5612 133 178-3927 135
171-6766 9
163-4143 29, 35, 42, 51, 52, 53 178-3929 135
171-6767 9
163-4144 29, 35, 42, 51, 52, 53 178-7288 119
171-7623 11
163-4145 72 178-7289 119
171-7624 11
163-4146 72 178-7291 119, 122, 127
172-0160 316, 320, 324
163-4147 60 178-7292 119, 122, 127
172-1764 285
163-7093 283 178-7293 110
172-1768 279
163-7094 275, 283 178-7294 110
172-1769 279
163-7187 286 178-7296 110, 115
172-1965 277
163-7188 286 178-7297 110
172-2100 278
163-7376 135 178-7540 119, 122, 127
172-3288 9
163-7393 72 179-0693 57, 58, 78, 79, 80, 81
172-3290 9
163-7538 276 179-0695 57, 58, 78, 79, 80, 81
173-9775 138
163-7539 276 179-1292 60, 86, 100
174-0215 125
165-0069 102 179-1486 100, 101
174-0216 125
166-3729 268 179-1488 100, 101
174-0217 124, 125
166-4927 113 179-1491 101
174-0218 124, 125
166-4928 113 179-1492 101
174-0219 124, 125
166-4929 113 179-1497 100, 101, 102, 266, 267,
174-0220 125 269, 270
166-4930 120
174-0221 124, 125 179-1499 100, 101, 102, 266, 267,
166-4931 120 269, 270
174-0222 124, 125
166-4932 117, 120 179-2348 119
174-0223 125
166-4933 117, 120 179-2393 119
174-0224 125
167-1128 130 179-2395 110
174-0225 125
167-4339 219 179-2396 110
174-0226 125
168-6753 7 179-3425 57, 58, 65, 67, 77, 78, 79,
174-0227 125 80, 81
168-6755 6, 8
174-8500 127 179-3426 92, 93, 94, 95, 265
168-6756 5, 6, 7, 8
174-8501 127 179-3427 57, 58, 65, 67, 77, 78, 79,
168-6757 5, 7
175-1229 136 80, 81
168-6758 5, 6, 7, 8
175-7045 132 179-3428 92, 93, 94, 95, 265
168-6759 5, 7
175-7897 110, 111 179-4182 110, 115
168-6760 5, 7
175-7900 119, 122, 127 179-9339 18
168-7576 136
176-2108 128 179-9340 18
168-7577 136
176-2146 127 180-2677 23
168-8407 129
176-4870 20 180-2681 18
168-8408 129
176-4871 21 180-2683 18
168-8409 129
176-4872 17, 20, 21 180-2684 18
169-8088 12
176-4874 17 180-2686 18
170-0820 130

369
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
180-2687 18 192-8303 102 201-1704 125
180-2689 18 192-8358 103, 104 201-2775 103
183-2874 102, 266, 269 192-8458 76, 91 201-2776 103
183-2875 102, 266, 269 192-8459 76, 91 201-9116 57, 78
183-2879 102, 267, 270 192-8460 76, 90, 91 201-9117 67, 79
183-2880 102, 267, 270 193-7070 279 201-9118 92
183-2883 100, 101, 102, 266, 267, 193-7091 277 201-9119 93
269, 270
194-1130 70 202-4902 126
184-2184 275
194-1131 70 203-0859 93
184-5859 18
194-1133 26 203-0862 93
185-0656 281
194-1134 27, 32 203-4862 126
185-0657 281
194-1150 11 204-1371 295, 296, 297, 298
185-5065 122, 127
194-1155 126 204-1375 295, 297
185-5093 122, 127
194-1156 126 205-3594 74, 260
185-5102 122
194-1157 126 206-1262 73, 88, 260, 264
185-5106 122
194-1162 126 206-1263 73, 88, 260, 264
185-7280 280
194-1172 5 206-1264 61, 71, 73, 88, 259, 260,
185-9159 13 264
194-1608 38, 45
185-9160 13 206-1265 30, 35, 43, 54
194-1609 33, 39, 44
185-9162 13 206-1469 46, 257
195-9343 37, 63
185-9185 13 206-1470 46, 257
195-9344 64
185-9380 136 206-1476 257
196-4083 265
185-9381 136 206-1477 257
197-4161 74, 259, 260
185-9382 136 206-1479 48, 257
198-1001 83, 262
186-2836 210, 211 206-1480 48, 257
198-1125 66, 82, 83, 261, 262
186-5499 89 206-3065 258
198-5596 76
186-5500 89 206-3812 289
198-5597 76
186-5502 56 206-6004 97, 106, 108
199-4501 125
186-5503 56 206-6049 113
199-5332 294, 298
186-5564 61, 62, 89, 90 206-6050 117, 120
199-5333 294, 298
187-6540 49 206-8961 54
199-5370 295
188-3064 26, 27, 32, 33, 37, 38, 39, 206-9211 30, 35, 43, 54
40, 44, 45, 47, 63, 64, 234, 199-5428 295, 297
236, 237 206-9212 61, 71, 73, 74, 88, 260, 264
199-5429 295, 297
188-3065 57, 67, 77, 78, 79 206-9257 61, 71, 73, 88, 260, 264
199-5432 295, 297
188-3066 92, 93 206-9260 61, 71, 73, 88, 260, 264
199-9928 295, 296, 297, 298, 299
189-0475 115 207-0469 263
199-9929 295, 297, 298
189-0476 115 207-0472 263
200-0809 295, 297
189-0479 115 207-0476 264
200-0996 294, 298
189-0794 115 207-0544 66, 82, 83
200-4197 68, 84
189-0795 115 207-0554 261, 262
200-4273 66
189-3861 103, 104 207-3658 263
200-4274 263
189-3862 103, 104 207-4873 48, 257
200-4275 263
189-3987 127 207-4874 48, 257
200-6432 74, 260
190-1551 305 207-5283 84, 262, 263
201-0825 57, 58, 65, 67, 77, 78, 79,
190-2495 305, 306 80, 81 207-5284 84, 263

190-3523 26, 27, 32, 33, 37, 38, 39, 201-0826 57, 58, 65, 67, 77, 78, 79, 207-5897 84, 262, 263
44, 45, 63, 64, 236 80, 81
207-5898 84, 263
190-3524 26, 27, 32, 33, 37, 38, 39, 201-0827 92, 93, 94, 95, 265
207-6061 133
44, 45, 63, 64, 236 201-0828 92, 93, 94, 95, 265

370
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
207-8167 88 220-8161 298 233-0386 194
207-9711 288 221-0010 49 233-2048 274
209-3312 30, 35, 43, 54 222-2265 314 234-0742 288
209-3313 30, 35, 43, 54 222-3058 318, 322 234-0743 296, 299
209-4535 84, 262, 263 222-3595 76 234-6206 280
209-4536 84, 263 222-5682 299 234-8950 280
209-4539 84 222-5683 299 234-8952 280
209-4540 84 222-5684 299 234-8958 280
209-6383 96, 97, 105, 106, 268 222-5686 298 234-8959 280
209-6384 96, 97, 105, 106, 268 222-5687 298 234-8962 280, 286
210-4645 288 222-7001 129 234-8967 278
210-4646 288 222-7007 133 234-8968 278
210-4647 288 223-8372 296, 299 234-8984 277, 278
210-4693 298 223-8396 288 234-9368 272
211-3295 97, 106, 108 223-8397 288 234-9369 272
211-9843 98 223-8398 289 235-1088 292, 293
212-5118 275 223-8399 289 235-5260 48
212-5119 275, 283 224-7269 48, 257 235-7774 89, 90
212-5120 275, 283 224-7270 48 235-7775 89, 90
212-5129 283 224-7732 48, 257 235-8531 85
212-6559 288, 289 224-7733 48 235-8536 99
212-6628 289 224-9407 289 236-5090 296
212-6681 288, 289 224-9409 288, 289 236-5092 296
212-6682 289 226-4049 272 236-8281 302
213-1932 65, 81 226-4050 272 236-8282 304
213-1933 58, 80 226-5101 76, 91 236-8893 77
213-1971 95 226-5103 104 237-7305 183
213-1972 94 226-5369 55, 75 237-7506 183
213-1975 265 227-3029 96, 105, 107, 268 238-3231 282
215-2986 98 228-2735 183 238-7664 294
215-2991 98 228-2736 183 238-7709 299
215-3956 289 228-6403 259 238-7728 298
215-4006 288, 289 228-6404 259 238-7729 298
216-2956 162, 167, 310, 317, 321 228-6405 266, 269 238-8591 97
216-2957 162, 167, 310, 317, 321 228-8376 131 238-8592 97
216-6141 288, 289 228-8403 295, 297, 298 238-9956 183, 184
216-6148 288, 289 230-3732 296, 299 239-3690 85
216-6149 288, 289 230-3733 296, 299 239-3691 99
218-5073 134 230-3772 296 239-4344 28, 34, 41
218-5404 104 230-7154 131 239-4362 28, 34, 41, 49
218-5405 104 230-7156 131 240-2503 183
218-5439 104 230-7159 131 240-2504 183
219-4302 288, 289 230-7162 131 240-2988 30, 43, 54, 74
219-8212 104 231-1910 274 240-3056 236
219-8227 104 231-1911 272 240-6304 284
219-8238 76 231-3079 167, 310, 317, 321 240-6305 284
219-8468 55 232-4466 273 240-6306 284
219-8469 55 233-0385 194 241-5972 285

371
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
241-5973 285 255-2364 107 260-2442 91
241-5976 285 255-2365 107 260-2665 281
242-4066 118, 121, 126 255-8882 201 260-2666 281
242-4067 118, 121, 126 256-6081 268 260-6341 284
242-4070 118, 121, 126 256-6084 133 260-6400 275, 276
244-3099 303 257-2510 107 261-1011 256
244-8697 116, 124 257-3604 107 261-1012 256
245-3805 116, 124 258-3016 293 261-1013 256
245-3806 116, 124 258-3017 293 261-1014 256
245-3808 116, 124 258-3020 292 261-1015 256
246-0504 116 258-3021 292 261-1016 256
246-0505 124 258-3022 292 261-1017 256, 265
246-0506 124 258-3023 292, 293 261-1018 256, 265
246-1906 26, 27, 32, 33, 37, 38, 39, 258-3025 291, 292 261-1021 256
44, 45, 63, 64
258-3026 291, 292 261-1022 256
246-1907 57, 58, 77, 78, 79, 80, 81
258-3027 292 261-1024 256
246-1908 92, 93, 94, 95
258-3028 292 261-6102 296
246-5228 185, 197
258-3030 291 261-6103 296
246-5425 28, 34, 41, 49
258-3031 291 261-6104 295, 297
246-5810 194
258-3032 291 261-6105 295, 297
247-0564 71, 86, 87
258-3033 291 261-6106 299
247-0565 71, 86, 87
258-3035 291, 292 261-6107 299
247-0566 87
258-3041 293 261-6108 298
247-1475 194
258-3047 293 261-6109 298
247-1476 194
258-3050 290 261-6111 298
247-7647 303
258-3054 291 261-6112 298
248-1537 116, 124
258-3064 291 261-6150 298
248-1967 112
258-3065 291, 292 261-6151 294
248-2041 197
258-3074 291, 292 262-4781 49
248-7143 49
258-3075 291, 292 263-9237 282
248-7151 99, 109
258-3084 290 263-9240 282
249-1776 303
258-3085 290 263-9250 274
250-3988 46, 257
258-3086 290 263-9252 275
250-3998 96, 105, 107, 268
258-3087 290 263-9253 275
250-4002 314, 318, 322
258-3088 290 263-9262 274
251-2473 112
258-3089 290 263-9264 286
251-2474 112
258-3092 291, 292 263-9265 286
251-7757 96, 105, 107, 268
258-3103 292 263-9267 281
251-8364 96, 105, 107, 268
258-3112 291, 292 263-9268 281
251-8368 96, 105, 107, 268
258-3116 292, 293 263-9269 275, 283
252-0617 96, 105
258-3117 292 264-1671 90
252-0618 105
258-3118 292 264-1672 90
252-4429 107
258-3122 290 264-5371 277
253-0336 268
258-8328 268 264-9821 99, 109
253-2740 96, 105, 268
260-2276 74 265-5109 66, 261
253-2741 116
260-2277 75, 76 265-7674 285
253-2742 124
260-2278 75, 76 265-7675 285
254-4095 264
260-2441 91 266-7271 66, 261

372
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
266-7272 66, 261 1A-5666 168 1P-8715 201
266-8793 280 1A-8063 180, 190, 206 1P-8716 201
266-8794 278 1A-8537 190, 308 1P-8717 201
267-4813 284 1B-2706 293, 295, 297 1P-8787 204
267-4817 284 1B-3867 272, 279, 280 1Q-4717 185
267-4819 284 1B-3876 278 1Q-4718 185
267-4829 277 1B-4207 182 1Q-4752 83
267-4831 277 1D-4585 188, 204 1Q-4769 97
269-4004 66, 261 1D-4608 189 1Q-4772 48, 67
269-4027 66, 261 1D-4610 188 1Q-4774 113
269-5215 82 1D-4630 215, 216 1Q-4983 185
269-7103 66, 261 1D-4635 205 1R-1124 326
269-7858 261 1D-4637 217 1R-1198 326
273-6910 90 1D-4639 215 1R-1317 326
278-1215 288 1D-4704 292 1R-5440 219
278-1219 294 1G-5515 323 1R-6008 22, 223
284-7361 56 1G-5516 323 1R-6009 22, 223
284-7362 56 1G-6133 304 1R-6010 22, 223
287-8269 262 1H-5728 69, 70, 177, 178, 198, 212, 1R-6011 22, 223
213, 214
287-8270 262 1R-8669 235
1H-6227 173, 179, 200
288-0934 188, 204 1R-8938 219
1H-7339 98, 99, 115, 187, 266, 269
288-0945 188, 204 1R-8939 219
1H-8128 161, 166, 174, 180, 307,
288-0947 188, 204 308, 313 1R-9507 12, 218
290-2269 257 1H-8397 142, 148, 154 1R-9814 22
290-2270 257 1H-8720 201 1R-9832 248
299-1689 105 1H-9696 143, 149, 155, 162, 163, 1R-9833 248
299-1690 116 164, 175, 176, 187, 202, 1R-9834 251
312, 316, 320, 324
300-6457 68 1R-9835 251
1J-4034 316, 317, 320, 321, 324,
300-6458 68 325 1R-9836 251
317-9078 188, 204 1K-6872 290, 294, 296, 298, 299 1S-1859 169, 183, 184, 196
317-9079 188 1M-1408 139, 140, 145, 146, 151, 1S-1860 46, 66, 82, 83, 169, 183,
152, 157, 158, 170, 171, 184, 194, 195, 196, 257,
0L-1169 144, 150, 156, 165, 178 261, 262
304, 311
0L-1351 143, 149, 155, 163, 176, 1S-2174 201
1M-1455 113, 208
312, 316, 320, 324
1M-3097 60, 86, 100, 143, 149, 155, 1S-3513 210, 211, 212
0S-0509 164 161, 163, 164, 166, 173, 1S-4445 117, 120, 125, 208
0S-1585 167, 212, 310 176, 179, 180, 307, 308,
312, 313, 316, 320, 324 1S-4446 117, 120, 125, 208
0S-1587 211, 216
1M-3669 97, 106, 108, 192, 193, 195 1S-6421 208
0S-1588 174, 200
1M-3670 97, 106, 108, 192, 193, 195 1S-7408 131
0S-1589 216
1M-7914 143, 149, 155, 163, 164, 1S-8947 130, 134, 137, 143, 149,
0S-1592 205, 216, 217 175, 176, 187, 202, 312, 155, 163, 175, 176, 186,
0S-1594 175, 187, 201, 202, 213, 316, 320, 324 187, 198, 199, 200, 201,
214 202, 212, 213, 214, 312
1M-7918 143, 149, 155, 163, 164,
0S-1595 181, 203 176, 312, 316, 320, 324 1V-0557 185, 197
0S-1625 168, 181 1M-8735 143, 149, 155, 163, 164, 1V-5431 217
176, 312, 316, 320, 324
0T-0319 174 1V-5433 217
1M-8736 143, 149, 155, 163, 164,
1A-0168 288 176, 312, 316, 320, 324 1V-7069 159
1A-1135 166, 180, 182, 313 1M-8747 205 1V-8623 139, 145, 151, 157, 171
1A-1460 295 1M-9011 130, 135 1V-9611 161, 166, 174, 180, 307,
313
1A-2029 205 1N-9701 172

373
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
2D-0592 289 3A-8962 22 3Q-6993 68, 83, 257
2F-8509 291, 292 3A-8967 22 3T-3206 187, 202
2H-1190 203 3A-8968 22 3T-3207 175, 187, 202
2H-3928 118, 121, 189, 190, 205 3A-8969 22 3T-3646 159
2H-3934 99, 109, 114, 126 3A-9605 9, 11, 302 3T-3647 159
2H-4145 215, 305, 306 3A-9614 9, 11, 302 3T-3648 159
2H-6124 138 3A-9615 9, 11, 302 3T-4283 167, 310, 317, 321
2H-6338 175, 187, 201, 202, 213, 3A-9616 9, 11, 302 3T-4617 164
214
3A-9617 9, 11, 302 3T-4618 164
2J-3507 191, 206, 207
3B-2968 187 3T-6269 213, 214
2J-8172 298
3B-4506 174, 200, 316, 320, 324 3T-6292 133
2K-4821 314, 315, 318, 319
3B-4508 212, 295, 297 3T-6308 208
2K-4973 298
3B-4510 144, 150, 156, 217 3T-7392 203
2M-0344 131, 137
3B-4516 251 3T-8491 209
2M-0849 167, 310
3B-8489 325 3T-9152 172
2M-2858 307, 308
3D-4603 15, 16, 286, 303 3T-9153 160, 172, 311, 312
2M-5652 116, 117, 120
3E-3217 29, 30, 35, 42, 43, 51, 52, 3T-9154 160
2M-5657 208 53, 54
3T-9536 305, 306
2M-8810 209 3E-4370 13, 14, 303
3V-1727 172
2P-0347 130, 134, 137, 143, 149, 3E-8032 130, 133, 134, 135, 137
155, 163, 173, 174, 175, 3V-4045 326
176, 186, 187, 198, 199, 3H-7654 216
3V-4527 197
200, 201, 202, 212, 213, 3K-0453 311
214, 312 3V-4745 182
3K-5234 207
2P-3201 166, 179, 180, 189, 190, 3V-4746 182
204, 205, 313 3K-6060 295, 297
3V-4764 182
2P-3514 201 3K-6638 143, 149, 155, 163, 176,
312 3V-4812 206, 207
2P-3538 201
3N-0837 197 3V-5029 182
2P-6026 208
3N-3095 167 3V-5030 182
2P-8045 179
3N-6815 197 3V-5055 205
2P-8048 189, 190, 205
3P-0623 96, 105, 107, 268 3V-5073 173
2P-9419 116, 124
3P-0815 288, 289 3V-5131 173
2P-9845 182
3P-1112 184, 196 3V-5284 217
2S-0115 182
3P-1113 184, 196 3V-5289 217
2S-0736 188, 190, 204
3P-1847 88, 177, 178 3V-5305 206, 207, 216
2S-2181 143, 149, 155, 161, 162,
3P-1848 88, 177, 178 3V-5376 211
163, 164, 166, 173, 174,
176, 179, 180 3V-8998 168, 181
3P-1849 137
2S-5658 144, 150, 156, 165 3V-9002 168, 181
3P-1900 200
2V-0250 208 3V-9011 181
3P-3419 253
2V-1221 200 3V-9025 170
3P-6600 217
2V-1687 209 3V-9091 180
3P-7153 170
2V-1703 207 3V-9114 172
3P-7154 170
2V-1704 207 3V-9489 172
3P-7155 170
2V-8627 186, 199 3Y-4297 140, 146, 152
3P-7156 170
2W-1145 278 4B-7572 168
3P-8272 173
3A-4129 160 4B-9371 325
3P-8432 186, 199
3A-4131 158 4C-2084 173
3P-8680 289
3A-4132 158 4D-3704 181, 182
3P-8681 289
3A-4133 158 4D-3882 316, 317, 320, 321, 324,
3Q-5391 185
325
3A-4790 162 3Q-6992 97

374
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
4E-0275 210, 211 5C-4088 158, 159 5P-2566 297, 317, 321
4E-2887 190, 206 5C-4089 159 5P-3868 129
4E-8500 198 5C-4092 159 5P-4028 192, 193
4E-8505 198 5C-4094 159 5P-5855 210
4F-6568 180, 190, 206 5C-4095 159 5P-8221 129
4F-7952 174 5C-4314 162 5P-8245 15, 203, 210
4H-9105 114, 121, 126, 186, 198, 5C-5585 159 5P-8247 166, 168, 178, 179, 180,
199, 204 216, 308, 313
5C-6602 162
4H-9527 164, 316, 320, 324 5P-8248 177, 187, 188
5C-8823 167
4H-9628 164, 316, 320, 324 5P-8249 168, 215
5C-9553 326
4I-4906 115 5P-8250 215
5E-7937 323
4I-6514 103 5P-9120 98, 99, 115, 266, 269
5E-7938 316, 320, 324
4I-7337 24 5Q-3215 29, 35, 42, 51, 52, 53
5E-7941 317, 321, 325
4I-7345 24 5Q-3216 87
5F-3106 203, 210, 211, 212, 216
4I-7472 23 5Q-3217 101
5F-8000 189, 190, 200, 205
4I-7473 17, 21, 22, 222, 223 5Q-3252 97
5G-2247 29, 35, 42, 51, 52, 53, 60,
4I-7475 17, 19, 20, 21, 22, 222, 223 71, 72, 86, 87, 101, 102, 5Q-3369 56
111, 115, 122, 314, 318,
4I-7476 17, 19, 20, 21, 22, 222, 223 322 5S-0709 26, 27, 32, 40, 47, 63, 64,
169, 170, 234, 237
4I-7477 17, 19, 20, 21, 22, 222, 223 5H-1504 189
5S-0710 169, 170
4I-7478 17, 19, 20, 21, 22, 222, 223 5H-8848 60, 86, 100, 143, 149, 155,
163, 176, 312 5S-0753 169, 170
4I-7479 17, 223
5I-6125 17, 18, 19, 20, 21, 22, 222, 5S-0754 26, 27, 32, 40, 47, 63, 64,
4I-7480 222 169, 170, 234, 237
223
4I-7488 24 5V-4969 185
5I-6140 17, 19, 21, 22, 222, 223
4I-7489 25 5W-3915 144, 150, 156
5I-6274 13, 14, 15, 16, 220, 303
4I-7538 17, 18, 19, 20, 21, 22, 222, 5W-4040 142, 148, 154
223 5I-9336 13
5K-0216 305 5W-4142 142, 148, 154
4J-0520 303
5K-0227 291, 292 5W-4146 140, 146, 152
4J-0526 142, 148, 154
5K-0305 173 5W-4147 140, 146, 152
4K-0173 215
5K-1770 179, 180 5W-4148 140, 146, 152
4K-7038 159, 309, 322, 323
5K-2707 19 5W-4149 140, 146, 152
4K-9943 174
5K-6191 143, 149, 155, 161, 162, 5W-4150 140, 146, 152
4K-9984 174
163, 164, 166, 173, 174, 5W-4151 140, 146, 152
4L-6454 295, 296, 297, 298, 299 176, 179, 180
5W-4152 140, 146, 152
4L-9337 293 5K-9107 175, 202
5W-4153 141, 147, 153
4M-0061 316, 317, 320, 321, 324, 5M-0627 179
325 5W-4154 141, 147, 153
5M-2037 208
4M-0660 138 5W-4155 141, 147, 153
5M-2043 175, 187, 201, 202, 213,
4M-5989 183, 184, 196 214 5W-4158 142, 148, 154
4M-5991 184, 196 5M-2894 205, 305, 306, 312 5W-4159 142, 148, 154
4M-5992 184, 196 5M-4436 190, 205 5W-4165 152
4N-1230 137 5M-4443 189, 190, 205 5W-4166 146, 152
4S-8984 175, 186, 198, 199, 200, 5M-5000 161, 162, 173, 174, 186, 5W-4167 141, 147, 153
201, 202, 203, 204, 205, 198, 199, 200, 307
210, 211 5W-4168 142, 148, 154
5M-5005 200
4S-9049 204 5W-4171 153
5M-5009 200
5A-3187 309, 322, 323 5W-7283 140
5N-4313 311
5A-8374 175 5W-9826 141, 147, 153
5P-0373 167
5A-8375 175 5W-9830 141, 147, 153
5P-1076 307
5C-0768 160 5W-9834 141, 147, 153
5P-1608 134
5C-0949 158 5W-9836 146, 152

375
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
5W-9841 147, 153 6I-9453 67, 234, 239 6V-5590 291, 292
6A-4713 159 6I-9454 40, 48, 67, 234, 239 6V-5657 135
6A-4725 162 6I-9587 69, 70 6V-5686 130, 134, 224, 231
6A-7527 160 6I-9597 69, 70 6V-5844 130, 134
6A-7539 160 6I-9854 83, 257 6V-6768 308
6B-5278 309, 315, 319, 323 6I-9893 97, 265 6V-6788 244
6B-5502 170 6K-9860 163, 164, 176, 312, 316, 6V-7609 225, 226, 229, 246
320, 324
6B-6863 305, 306 6V-7644 272, 279
6K-9861 143, 149, 155, 163, 164,
6C-3495 160 176, 312, 316, 320, 324 6V-7658 24, 28, 34, 41, 49, 233,
235, 241, 245
6F-7030 213, 214 6K-9880 143, 149, 155, 163, 176,
312 6V-7660 25, 226, 229
6F-7831 210, 211, 212
6M-2001 191, 206, 207 6V-7661 29, 34, 42, 50, 70, 235
6H-1309 28, 34, 41, 49, 60, 71, 72,
86, 87, 88, 110, 177, 178, 6P-2083 212 6V-8132 130
187, 203, 235
6P-4234 170 6V-8182 168, 181
6H-2953 204
6P-6129 184, 196 6V-8188 293
6H-6237 216
6P-6130 184, 196 6V-8200 277
6H-7382 166, 179, 180, 308
6P-8912 203 6V-8201 224
6I-6446 17, 21, 22, 222, 223
6S-3146 309, 315, 319, 323 6V-8202 15
6I-6451 25
6S-3171 167, 310, 317, 321 6V-8237 135, 248
6I-6454 25
6S-3172 167, 310, 317, 321 6V-8336 15
6I-6477 24
6S-3495 167, 310, 317, 321 6W-1029 191, 206
6I-6488 14, 303
6S-3609 316, 320, 324 6W-1030 191, 206
6I-6489 14, 303
6S-7038 167, 310, 317, 321 6W-1031 191, 206
6I-6525 15, 16, 303
6S-7124 309, 323 6W-1032 191, 206
6I-6528 16
6S-7715 167, 310, 317, 321 6W-2451 172
6I-6549 25
6S-8823 309, 323 6W-3502 206
6I-6575 15
6S-9049 314, 318, 322 6W-3503 206
6I-6590 24
6T-0511 145, 151, 157 6W-3504 205
6I-7076 134
6T-0513 159 6W-5557 210
6I-7077 134
6T-0517 159 6Y-0471 129
6I-7079 134
6T-2619 306 6Y-0472 133
6I-7081 130, 133, 134, 135, 136,
137 6T-2620 306 6Y-0473 29, 30, 35, 42, 43, 51, 52,
53, 54, 60, 71, 72, 86, 87,
6I-7083 134 6T-4871 203 88, 96, 101, 102, 105, 111,
115, 116, 122, 124, 161,
6I-7084 134 6T-8049 133 166, 179, 180, 189, 190,
6I-7230 133 6T-8050 133 203, 204, 205, 210, 211,
216, 268, 305, 306, 307,
6I-7508 137 6T-8435 130, 135 308, 313, 314, 318, 322
6I-7547 137 6T-8437 138 6Y-0846 32, 33, 37, 38, 39, 40, 44,
45, 47, 57, 58, 63, 64, 65,
6I-7550 137 6T-8438 131, 137 67, 77, 78, 79, 80, 81, 256
6I-7553 137 6T-8853 133 6Y-0847 57, 58, 78, 79, 80, 81
6I-7554 137 6V-1366 288, 289 6Y-0850 58, 65, 80, 81
6I-7555 137 6V-1792 46, 66, 82, 83, 184, 257, 6Y-0851 57, 58, 65, 67, 77, 78, 79,
261, 262
6I-8454 97 80, 81
6V-2699 306
6I-8455 97 6Y-0852 57, 58, 78, 79, 80, 81
6V-2701 203
6I-8648 133 6Y-0925 175, 186, 187, 189, 190,
6V-3532 240 198, 199, 200, 201, 202,
6I-8651 83, 257 204, 205, 210, 211, 213,
6V-4429 144, 150, 156 214, 216
6I-9397 72
6V-4791 163, 164, 176, 201, 312, 6Y-0935 309, 314, 315, 318, 319,
6I-9398 72 316, 320, 324 322, 323
6I-9399 72, 74, 260 6V-5200 220

376
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
6Y-0936 309, 314, 315, 318, 322, 6Y-6405 185 7F-8267 161, 166, 173, 179, 180,
323 307, 308, 313
6Y-6407 185, 197
6Y-0937 309, 314, 315, 318, 319, 7F-8268 29, 30, 35, 42, 43, 51, 52,
322, 323 6Y-6411 185 53, 54, 142, 144, 148, 150,
6Y-6721 120 154, 156, 165
6Y-0938 309, 314, 315, 318, 319,
322, 323 6Y-6722 120 7G-0418 189
6Y-0939 309, 314, 315, 318, 319, 6Y-7432 120 7G-3431 129
322, 323
6Y-7433 120 7G-4332 96, 105, 116, 124, 161,
6Y-0940 309, 314, 315, 318, 319, 166, 179, 180, 189, 190,
322, 323 6Y-7453 120 203, 204, 205, 216, 268,
307, 308, 313
6Y-1053 60, 87 6Y-7592 118
7H-3171 13, 14, 15, 24, 25, 28, 29,
6Y-1054 60, 72, 87 6Y-7599 118, 121, 126 34, 41, 42, 49, 50, 59, 60,
6Y-1056 60, 71, 86, 87 6Y-7602 118, 121 69, 70, 84, 85, 86, 98, 99,
100, 109, 110, 114, 118,
6Y-1348 184 6Y-7603 118, 121 121, 126, 142, 148, 154,
6Y-7610 120 258, 259, 263, 266, 269,
6Y-1596 309, 323 303
6Y-1597 309, 323 6Y-8023 98, 99, 266, 269
7H-3596 140, 146, 152
6Y-1607 57, 58, 65, 67, 77, 78, 79, 6Y-8028 98, 99, 266, 269
7H-3597 139, 140, 145, 146, 151,
80, 81 6Y-8029 98, 99, 266, 269 152, 157, 158, 170, 171,
6Y-1608 57, 58, 65, 67, 77, 78, 79, 304, 311
6Y-8075 60, 86, 100
80, 81 7H-3598 194, 195
6Y-8076 60, 86, 100
6Y-1717 309, 315, 319, 323 7H-3599 192, 193
6Y-8077 60, 86, 100
6Y-1782 60, 61, 71, 73, 87, 88, 260, 7H-3606 140, 146, 152
264 6Y-8127 122, 127
7H-4571 201
6Y-2040 171 6Y-8128 122
7H-4574 201
6Y-2126 83 6Y-8129 122
7I-7767 59, 85
6Y-2192 196 6Y-8130 122
7I-9091 248
6Y-2266 59, 69, 84, 85, 258, 259, 6Y-8131 122
263 7K-1089 161, 166, 180
6Y-8134 99, 109, 114
6Y-2270 59, 69, 70, 84, 85, 258, 7K-1825 159
259, 263 6Y-8171 110, 114, 118, 121, 126
7K-1826 159
6Y-2272 59, 69, 84, 85, 258, 259, 6Y-8172 110, 114, 118, 121, 126
263 7K-2016 159
6Y-8176 110, 114, 118, 121, 126
6Y-2589 92, 93, 94, 95, 265 7K-2017 159, 309, 314, 315, 318,
6Y-8177 110, 114, 118, 121, 126 319, 322, 323
6Y-2590 92, 93, 94, 95, 265 6Y-8180 97 7K-2018 139, 145, 151, 157, 158,
6Y-2748 94, 95, 265 6Y-8183 169 159, 171, 304, 311
6Y-2749 92, 93, 94, 95 6Y-8184 169 7K-2020 139, 145, 151, 157, 171,
304, 311
6Y-2750 92, 93, 94, 95 6Y-8185 169
7K-5448 213, 214
6Y-2751 92, 93, 94, 95, 265 6Y-8186 26, 27, 32, 33, 37, 38, 39,
40, 44, 45, 47, 63, 64, 169, 7K-5449 213, 214
6Y-2790 101, 102
234, 236, 237 7R-0226 316, 317, 320, 321, 324,
6Y-2791 101, 102
6Y-8795 304 325
6Y-2792 101, 102, 266, 267, 269,
6Y-8852 101, 102 7R-0227 316, 317, 320, 321, 324,
270 325
6Y-2794 101 6Y-8950 309
7R-0228 316, 317, 320, 321, 324,
6Y-2902 190, 205 6Y-9024 92, 93, 94, 95, 108, 113 325
6Y-4738 171 6Y-9339 110, 114, 118, 121, 126 7R-0234 324
6Y-4744 167, 310, 317, 321 6Y-9855 60, 86, 100 7R-0241 325
6Y-4898 58, 68, 84, 258 6Y-9856 60, 86, 100 7R-2755 310
6Y-5323 60, 86, 100 6Y-9858 60, 86, 100 7R-2756 310
6Y-5662 83 6Y-9859 60, 86, 100 7R-2757 310
6Y-5685 98, 265 7D-1649 181 7R-2758 310
6Y-5686 77, 78, 79, 80, 81 7D-9749 167, 310, 317, 321 7T-0158 203
6Y-6201 60, 72, 87 7F-5227 177 7T-1094 203
6Y-6398 185 7F-6268 137 7T-1310 209

377
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
7T-2565 71 7X-2575 98, 104, 109, 111, 114, 8E-4275 195
115, 263, 265, 268
7T-4030 306 8E-4281 115
7X-2576 111, 112, 264, 267, 270
7T-4043 169 8E-4282 115
7X-2577 100
7T-4044 169 8E-4283 115
7X-2583 110
7T-4080 306 8E-4284 115
7X-2584 114, 118, 121, 126
7T-4086 306 8E-4285 115
7X-3392 293
7T-4087 306 8E-4335 114
7X-4778 136
7T-5133 203 8E-4343 114
7X-7248 311
7T-9264 210 8E-4359 28, 34, 41, 49, 235
7X-9835 309
7T-9754 288, 289 8E-4426 196
7Y-0336 111, 112
7T-9755 288, 289 8E-4427 196
7Y-1248 98, 266, 269
7T-9823 192, 193 8E-4428 196
7Y-1810 120
7T-9824 192, 193 8E-4429 197
7Y-1871 114
7T-9825 192, 193 8E-4430 197
7Y-2155 24
7V-0753 209 8E-4434 197
7Y-2158 24
7V-0820 217 8E-4496 185
7Y-2159 24
7V-0821 217 8E-4573 177
7Y-2162 24
7V-0896 216 8E-4574 177, 178
7Y-2581 61, 88
7V-0897 216 8E-4576 187
7Y-2914 123
7X-0310 307 8E-4577 187
7Y-5232 122, 123, 131, 132
7X-0311 173 8E-4579 203
7Y-5267 273
7X-0313 186, 198, 199, 200 8E-4580 203
7Y-8973 122
7X-0318 161, 162 8E-4621 114
7Z-8877 171
7X-0325 307 8E-4622 114
8C-1149 312
7X-0349 305, 306 8E-4623 114
8C-3425 12, 13, 218, 219
7X-0366 168, 181 8E-4686 120
8C-4436 291
7X-0403 190, 206 8E-4713 184, 196
8C-8723 119, 127, 128
7X-0407 216 8E-4714 196
8E-0645 142, 144, 148, 150, 154,
7X-0510 284 156, 165 8E-5031 29, 35, 42, 51, 52, 53
7X-0513 205 8E-0829 215 8E-5032 29, 35, 42, 51, 52, 53
7X-0515 278, 280, 285, 304 8E-0830 215 8E-5035 29, 30, 35, 42, 43, 51, 52,
53, 54
7X-0529 190, 191, 205, 206 8E-0831 215
8E-5037 29, 30, 35, 42, 43, 51, 52,
7X-0563 161, 162, 173, 186, 198, 8E-0855 183, 184, 196 53, 54, 235
199, 200
8E-1442 139 8E-5456 203
7X-0578 281
8E-1882 141, 147, 153 8E-5467 177
7X-0622 221
8E-1886 117, 120, 125 8E-5468 178
7X-2440 61, 62, 76, 89, 90, 91
8E-1887 117, 120, 125 8E-5599 29, 30, 35, 42, 43, 51, 54,
7X-2454 100, 101, 102, 267, 270 235
8E-2355 184
7X-2553 280 8E-5600 29, 34, 42, 50, 70, 235
8E-2356 184
7X-2555 25, 226 8E-5601 29, 34, 42, 50, 70, 235
8E-3332 141, 147, 153, 159
7X-2556 285 8E-5602 29, 34, 42, 50, 70
8E-3333 141, 147, 153
7X-2557 133 8E-5605 29, 34, 42, 50, 70
8E-3334 141, 147, 153
7X-2562 28, 41, 48, 49, 68 8E-5606 29, 34, 42, 50, 70
8E-3335 147, 153, 159
7X-2563 61, 74, 75, 88 8E-5608 29, 34, 42, 50, 70
8E-4055 208
7X-2564 235 8E-5656 142
8E-4056 208
7X-2565 29, 30, 35, 42, 43, 51, 52, 8E-5745 178
53, 54, 60, 61, 71, 72, 73, 8E-4272 96, 97, 105, 106, 108, 192,
74, 86, 87, 88, 259, 260, 193, 194, 195, 268 8E-6089 113
264
8E-4273 192, 193, 194, 195 8E-6090 113

378
 Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
8E-6091 113 8H-2265 29, 30, 35, 43, 51, 52, 53, 8S-5653 142, 144, 148, 150, 154,
54, 142, 144, 148, 150, 156, 165, 212
8E-6092 113 154, 156, 165, 212, 235
8S-5656 144, 148, 150, 154, 156,
8E-6094 113 8K-0321 174 165, 212
8E-6095 113 8K-0323 171 8S-6212 294, 298
8E-6096 113 8K-1390 209 8S-9092 179
8E-6097 113 8K-1392 209 8S-9093 191, 206, 207
8E-6098 113 8K-1427 212 8T-0281 141, 147
8E-6099 113 8K-1438 212 8T-0363 110, 111, 115
8E-6135 186, 199 8K-2271 172 8T-0375 229, 251
8E-6792 29, 34, 42, 50, 70 8K-2276 172 8T-0672 135
8E-6793 29, 34, 42, 50, 70 8K-2743 185, 197 8T-0707 284, 285
8E-6974 114 8K-4054 209 8T-1159 24, 29, 34, 42, 50, 60, 70,
8E-7222 66, 82, 83, 261, 262 86, 100
8K-4438 181
8E-7232 198 8T-2502 173, 293
8K-4444 181
8E-7405 66, 82, 83, 261, 262 8T-3282 58, 68, 84
8K-4699 171
8E-7406 66, 82, 83, 261, 262 8T-3338 250
8K-4753 208
8E-7407 82, 83, 262 8T-4001 264, 267, 270
8K-4754 208
8E-7408 82, 83, 262 8T-4121 279, 280, 286
8K-4756 208
8E-7409 82, 83, 262 8T-4122 25, 167, 216, 305, 306
8K-8305 172
8E-7410 82, 83, 262 8T-4123 29, 30, 31, 35, 36, 42, 43,
8M-2619 208 51, 52, 53, 54, 55, 56, 60,
8E-7494 143, 144, 149, 150, 155, 8M-2620 113, 208 61, 71, 72, 73, 74, 75, 76,
156, 165 86, 87, 88, 90, 91, 244,
8M-2621 113, 208 259, 260, 264, 315, 319,
8E-7496 144, 150, 156, 165 323
8M-4390 88
8E-7510 203, 210, 211, 216 8T-4131 76, 91
8M-4395 177, 178
8E-7855 208 8T-4132 278, 285
8M-5661 179, 180
8E-7856 208 8T-4133 279
8M-6238 97, 106, 108, 192, 193,
8E-7857 208 194, 195 8T-4139 273, 277, 281, 286
8E-7868 185 8M-6239 97, 106, 108, 192, 193, 8T-4140 285, 304
8E-8585 26, 27, 32, 33, 37, 38, 39, 194, 195
8T-4167 100, 101, 102, 103, 104,
40, 44, 45, 47, 63, 64, 234, 8M-6910 117, 120 110, 111, 112, 115, 130,
236, 237 264, 267, 270
8M-7231 183, 184, 196, 242
8E-8586 26, 27, 32, 33, 37, 38, 39, 8T-4172 279
40, 44, 45, 47, 63, 64, 234, 8M-7290 183, 184, 196
237 8T-4173 278, 285
8M-7456 170
8E-8643 192 8T-4178 279
8P-5197 189, 190, 200, 205
8E-8644 193 8T-4182 280, 286
8P-5394 210, 211, 216
8E-8812 68, 83 8T-4183 41, 286
8P-6188 175, 201, 202
8E-8814 68, 83 8T-4192 273, 281
8P-6245 214
8E-8835 27, 48, 67, 234, 239 8T-4193 28, 33, 302
8P-6255 213, 214
8E-8907 161, 174, 307 8T-4205 326
8P-6256 214
8E-9805 28, 41, 48, 68, 172 8T-4223 16, 211, 273, 277, 281,
8P-6651 186, 198, 199, 204 286, 290, 296, 299, 303,
8F-6711 60, 61, 71, 72, 73, 74, 86,
8P-6652 173, 179 307, 317, 321
87, 88, 186, 199, 203, 216,
260, 264 8P-7002 305, 306 8T-4224 316, 317, 320, 321, 324,
325
8F-8882 59, 69, 84, 85, 100, 101, 8P-7003 306
102, 204, 210, 211, 258, 8T-4241 229
259, 263, 266, 267, 269, 8S-2589 195
270 8T-4403 312
8S-2590 195
8H-2262 175, 186, 187, 189, 190, 8T-4506 312
8S-2981 172
198, 199, 200, 201, 202, 8T-4648 16, 220, 303
204, 205, 210, 211, 213, 8S-4745 314, 315, 318, 319
214, 216 8T-4779 25, 227
8S-4747 314, 315, 318, 319

379
Part Number Index
SORTED BY PART NUMBER

PART PAGE PART PAGE PART PAGE

NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
8T-4896 161, 173, 186, 198, 199, 9F-2247 162, 167, 280, 291, 292, 9S-4324 204, 212
293, 307, 325 310, 317, 321
9S-4536 216
8T-4956 277, 281 9G-4872 210, 211
9S-4540 210, 211, 216
8T-4994 168, 180, 181 9G-5664 258, 259, 263
9S-8320 187, 202
8T-5042 315, 319, 323 9G-6159 208
9S-9535 179
8T-5361 206, 207 9G-6161 208
9T-2584 136
8T-5376 232, 240, 245 9G-6396 304
9U-0371 207
8T-5379 102, 103, 104 9G-7033 213
9U-0375 207
8T-5439 61, 62, 89, 90 9G-7034 213
9W-2142 29, 30, 35, 42, 43, 51, 52,
8T-5460 30, 31, 36, 43, 54, 55, 56, 9G-7046 216 53, 54, 142, 144, 148, 150,
61, 62, 75, 76, 89, 90 154, 156, 165, 212, 235
9G-7109 209
8T-5878 24, 29, 34, 42, 50, 60, 70, 9W-2143 142, 144, 148, 150, 154,
86 9G-7111 209 156, 165
8T-6346 229 9G-7113 209 9W-2144 144, 150, 156, 165
8T-6429 129 9G-7962 208 9W-2145 142, 144, 148, 150, 154,
9G-8027 189, 205 156, 165
8T-6430 56, 58, 68, 76, 84, 90, 91,
234, 258 9H-1031 216 9W-2146 30, 35, 43, 54, 61, 71, 73,
74, 88, 100, 101, 102, 110,
8T-6444 134 9H-7759 213, 214 115, 119, 122, 127, 130,
8T-6624 131 131, 134, 135, 137, 138,
9H-9414 213, 214 142, 144, 148, 150, 154,
8T-6871 167 9K-0028 139, 145, 151, 157, 158, 156, 165, 177, 178, 187,
171, 304, 311 203, 215, 260, 264, 266,
8T-7338 23, 224, 280 267, 269, 270
8T-7530 309 9K-0029 139, 145, 151, 157, 158,
171, 304, 311 9W-2201 28, 34, 41, 49, 60, 71, 72,
8T-8441 110, 114, 118, 121, 126 86, 87, 88, 110, 114, 177,
9K-3565 185, 197 178, 187, 203, 235
8T-8917 316, 317, 320, 321, 324,
325 9K-3568 185, 197 9W-2202 178
8T-8919 293, 295 9K-4059 139, 145, 151, 157, 158, 9W-2204 60, 72, 87, 177, 178
171, 304, 311
8T-9389 210, 211 9W-2210 203
9K-4060 18, 139, 145, 151, 157,
8T-9598 272, 278, 279, 280 171, 304, 311 9W-2212 101, 102, 203
8U-1692 144, 150, 156 9K-4061 139, 145, 151, 157, 171, 9W-2379 311
304, 311
8U-2704 141, 147, 153 9W-3137 26, 27, 32, 33, 37, 38, 39,
9K-4062 139, 145, 151, 157, 171, 40, 44, 45, 47, 63, 64, 234,
8U-2926 140, 146, 152 304, 311 236, 237
8U-2927 140, 146, 152 9K-6628 18, 139, 145, 151, 157, 9W-3138 26, 27, 32, 33, 37, 38, 39,
8U-3456 140 158, 171, 304, 311 40, 44, 45, 47, 63, 64, 234,
236, 237
8V-1715 61, 74, 75, 88 9K-6629 18, 139, 145, 151, 157,
158, 171, 304, 311 9W-3198 177
8V-2695 162
9M-3786 130 9W-3359 187, 203
8V-3502 168
9M-7783 167, 168, 181 9W-3361 26, 27, 32, 33, 37, 38, 39,
8V-3506 168 40, 44, 45, 47, 57, 58, 63,
9M-9730 175, 186, 198, 199, 200, 64, 65, 67, 77, 78, 79, 80,
8V-3507 168 201, 202, 203, 204, 205, 81, 234, 236, 237, 256
210, 211
8V-4713 161 9W-3619 26, 27, 32, 33, 37, 38, 39,
9N-4327 309, 323 40, 44, 45, 47, 63, 64, 234,
8V-4714 161, 307
9N-4328 309, 323 236, 237
8V-8691 167
9N-8381 312 9W-4355 215
8V-9106 161
9P-7782 166, 180, 313 9W-4381 92, 93, 94, 95, 108, 113,
8V-9129 191, 206, 207 265
9S-0312 204
9B-7237 161, 186, 198, 199, 307, 9W-4651 134
325 9S-1363 206, 207
9W-4652 137
9C-2498 142, 148, 154 9S-1366 212
9W-4960 187
9C-2646 172 9S-1838 82, 83, 262
9W-4961 187
9C-3416 216 9S-3567 175, 187, 202
9W-4962 187
9C-3628 216 9S-3581 175, 187, 201, 202
9C-4224 186, 199 9S-3582 175, 187, 201, 202

380
 Part Number Index
SORTED BY PART NUMBER

PART PAGE
NUMBER NUMBER
9W-5224 143, 149, 155, 161, 163,
164, 166, 173, 174, 176,
179, 180, 312, 313, 316,
320, 324
9W-5582 203
9W-5933 129
9W-5934 129
9W-6174 143, 149, 155, 163, 176,
312
9W-6483 196
9W-6484 196
9W-6632 203
9W-6714 215
9W-6715 215
9W-6716 215
9W-6717 215
9W-6718 215
9W-6726 171
9W-6727 171
9W-6728 171
9W-8045 142, 148, 154
9W-9351 27, 40, 48, 67, 234, 239
9W-9352 48, 67
9W-9451 28, 34, 41, 49
9W-9455 28, 34, 41, 49, 69, 70
9W-9498 203
9W-9625 129
9X-0941 288, 295, 297
9X-6618 129
9X-8257 25, 224, 226, 227, 230,
231, 233, 241, 285, 302
9X-8258 119, 122, 123, 127
9X-8399 117, 120, 129, 131, 132
9X-8528 122

381
Cat ® Dealers define world-
class product support.
We offer you the right parts and service

solutions, when and where you need them.

The Cat Dealer network of highly trained

experts keeps your entire fleet up and running

to maximize your equipment investment.

PECP3003-05 VOL II
www.cat.com

© 2007 Caterpillar • All Rights Reserved • Printed in USA

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.