Scribd
Upload
671 views10 pages

Trestles Design 1

1) The document provides design calculations for a 60m span open web girder trestle with 4 columns. 2) The maximum vertical load on each column is calculated to be 16.9 MT. The column design of 4x(50x50x6) RSJ is checked to have a capacity of 37.3 MT which is greater than the load. 3) The lacing system is designed to take 2.5% of the total axial force (0.42188 MT) using ISMC 75 sections.

Uploaded by

Anonymous sfkedkym
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
671 views10 pages

Trestles Design 1

1) The document provides design calculations for a 60m span open web girder trestle with 4 columns. 2) The maximum vertical load on each column is calculated to be 16.9 MT. The column design of 4x(50x50x6) RSJ is checked to have a capacity of 37.3 MT which is greater than the load. 3) The lacing system is designed to take 2.5% of the total axial force (0.42188 MT) using ISMC 75 sections.

Uploaded by

Anonymous sfkedkym
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 10

HMM INFRA LTD,ANBALA

TITLE TRESTLES DESIGN CALCULATION


PROJECT 60 MTR SPAN OPEN WEB GIRDER
CUSTOMER L&T LUCKNOW METRO

DESIGN OF TRESTLE ( CRIBS )

Length of Span = 60 m
Weight of span = 450 MT
weight/meter for span = 7.5
Max load in segment = 45
Max Reaction per Trestles = 1.5x135 67.5 MT
No. of Trestles = 4

Maximum Vertical load coming on the column = 16.9


Horizontal force @ % 10.0 = 1.69

Column provided4x(50x50x6)

Rolled Steel Joist Angle Rsj 50X50X6(Dimension and its Properties):

50

50

400
x x

400
y
Properties of RSJ:50x50x6
Ax = 5.68
Ixx = 12.90
Iyy = 12.90
rmin = 1.51
Cxx = 1.45
Cyy = 1.45
weight = 4.50
Area of combined section = 22.72
Moment of inertia of combined section = 7819.1
rxx of combined section = 18.55
Z of combined section = 390.96

Height of column considered = 3.00


= 300
Hence λ L/rxx = 16.17
Allowable slenderness ratio = 180.00
n n 1/n
Permissible compressive stress 0.66xfcc x fy/[(fcc) +(fy) ]
fcc= p 2xE/λ2 7548.08
fy = 250 MPA n= 1.4
Hence , Permissible compressive stress = 1640.08
Capacity of the column = 37263
= 37.3
> 16.9

Max. Bending moment = 5.06


Bending stress , sbc =M/Z = 1294.90
= 1650
Axial stress , sac=P/A = 742.74
Allowable axial stress, sas = 1640.08
Hence sbc/sbs + sac/sas = 1.2377

Design of Lacing System:


### kg
371
variable from 1.0 m

371 45 0.7854
to 3.0m

371

Lacing is designed for 2.5% of total axial force


Force on lacing system = 0.42188
sectio used for lacing system = ISMC 75
Ax = 5.68
rmin for each component of angles = 1.51
L 0.7 x ( 37.1 37.1 ) = 51.94
L/rmin = 34.40

n n 1/n
Permissible compressive stress 0.66xfcc x fy/[(fcc) +(fy) ]
fcc= p 2xE/λ2 1668.32
fy = 250 MPA n= 1.4
Hence , Permissible compressive stress = 1572
Axial Compressive stress < 74.2738

DESIGN OF MAIN BEAM ( B1 )

Maximum Bending moment = 9.00

USING RSJ - 300 x 140

Properties of Rsj 300 Here L 3.50 m

D = 300 mm
T = 13.1 mm
t = 7.7 mm
d1 = 300 - 2 x 13.1 = 273.8
Zxx = 599 cm3
ry = 12.4 mm d1 = 35.6
t
Now
fcb = k1( X +K2 x Y) (C2/C1)

Here K1 =1 K2 = 0.0 C2/C1 = 1

L = 282.3 D = 22.9
ry T
Values of X & Y from cl.6.2.4(IS:800-19Table:6.5
X = 130
Y = 46
fcb = 130
AS d1/ < 85 fcb = 130 x 1.2 = 156

Hence sbc = 1650 Kg/cm2


Stress = 1503 Kg/cm2 > 1650 Kg/cm2
Ok

Max shear force = 15.6


= 15642.6
Hence shear stress = 677.2
< 1125
Ok

x ≈
NBALA
PREPARED BY PS REV 0
CHECKED BY RKS DATE ###
REF DRAWING NO.

MT
t
cm2
cm4
cm4
cm
cm
cm
kg/m
cm2
cm4
cm
cm3

m considering max height


cm

Ok

( cl.5.1.1 of IS:800-1984)

N/mm2

kg/cm2
kg
t
t Ok

t-m (Horizontal force x Ht of column)


kg/cm 2

kg/cm2 Ok
kg/cm2
kg/cm2
> 1 check

165

45

( cl.5.7.2 of IS:800-1984)
MT
ISMC 75
cm2
cm
cm Ok
< 145 ( cl.5.7.2.3 of IS:800-1984)

( cl.5.1.1 of IS:800-1984)

N/mm2

kg/cm2
kg/cm3 Ok

t-m AS PER STADD FILE

1344 = 85
fy

mm

<
t AS PER STADD FILE
kg

Kg/cm2

You might also like