Scribd
Upload
37 views

EG Questions

The document provides instructions for drawing projections and sections of various 3D geometric solids, including a cylinder, pentagonal pyramid, square prism, cone, hexagonal prism, and cone. The instructions specify how each solid is oriented in space and cut by section planes, and what views (top, front, side, true shape of section) need to be drawn for each case.

Uploaded by

Thirumalai R
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
37 views

EG Questions

The document provides instructions for drawing projections and sections of various 3D geometric solids, including a cylinder, pentagonal pyramid, square prism, cone, hexagonal prism, and cone. The instructions specify how each solid is oriented in space and cut by section planes, and what views (top, front, side, true shape of section) need to be drawn for each case.

Uploaded by

Thirumalai R
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECTION OF SOLIDS

1.DRAW THE PROJECTIONS OF A CYLINDER,BASE 30mm DIAMETER ANS AXIS 40mm LONG,RESTING
WITH A POINT OF ITS BASE CIRCLE ON HP SUCH THAT THE AXIS IS MAKING AN ANGLE OF 30O WITH
HP AND ITS TOP VIEW PERPENDICULAR TO VP.

2. DRAW THE PROJECTIONS OF A PENTAGONAL PYRAMID OF 30mm SIDE AND HEIGHT 60mm, WHEN
IT IS RESTING ON ONE OF ITS BASE EDGES.THE AXIS IS MAKING 30O WITH HP AND THE TOP VIEW OF
THE AXIS IS MAKING 45O WITH VP.

3.A SQUARE PRISM SIDE OF BASE 30 mm AND AXIS 50mm LONG,HAS ITS AXIS INCLINED AT 60O TO
HP.IT HAS AN EDGE OF ITS BASE IN THE HP AND INCLINED AT 45O TO VP.DRAW ITS PROJECTIONS.

4.DRAW THE PROJECTIONS OF A CONE,BASE 30mm DIAMETER AND AXIS 50mm LONG, RESTING ON
HP ON A POINT OF ITS BASE CIRCLE WITH THE AXIS MAKING 45O WITH HP AND 30O WITH VP.

SECTIONS OF SOLIDS

1.A HEXAGONAL PRISM,SIDE OF BASE 30mm AND AXIS 60mm LONG,RESTS WITH ITS BASE ON HP
SUCH THAT ONE OF ITS RECTANGULAR FACES IS PARALLEL TO VP.A SECTION PLANE PERPENDICULAR
TO HP AND PARALLEL TO VP CUTS THE PRISM AT A DISTANCE OF 10mm FROM ITS AXIS.DRAW ITS
TOP AND SECTIONAL FRONT VIEWS.

2. A SQUARE PRISM, SIDE OF BASE 30mm AND AXIS 60mm LONG, RESTS WITH ITS BASE ON HP AND
ONE OF ITS RECTANGULAR FACES IS INCLINED AT 30O TO VP.A SECTION PLANE PERPENDICULAR TO
VP AND INCLINED AT 60O TO HP CUTS THE AXIS OF THE PRISM AT A POINT OF 20mm FROM ITS TOP
END.DRAW THE SECTIONAL TOP VIEW AND TRUE SHAPE OF SECTION.

3.A SQUARE PRISM OF 32mm SIDE AND 100mm HEIGHT IS LYING ON ITS BASE ON HP SUCH THAT
THE EDGES OF THE BASE ARE EQUALLY INCLINED TO VP.THE PRISM IS CUT BY A SECTION PLANE
PASSING THROUGH THE MIDPOINT OF THE AXIS SUCH THAT THE TRUE SHAPE OF A SECTION IS A
RHOMBUS OF DIAGONALS OF 102mm AND 45mm.

4. A PENTAGONAL PYRAMID, SIDE OF BASE 26mm AND 52mm HEIGHT, RESTS WITH ITS BASE ON
HP.ONE OF THE EDGES OF ITS BASE IS PERPENDICULAR TO VP.A SECTION PLANE PERPENDICULAR TO
VP AND INCLINED AT 450 TO HP BISECTS THE AXIS.DRAW THE SECTIONAL TOP VIEW AND PROJECT
ANOTHER TOP VIEW ON AN A.I.P. PARALLEL TO THE SECTON PLANE SHOWING TRUE SHAPE OF
SECTION.

5.A CYLINDER OF DIAMETER 40mm AND HEIGHT 60mm IS HAVING ITS AXIS VERTICAL.IT IS CUT BY A
PLANE PERPENDICULAR TO VP AND INCLINED AT 300 TO HP.THE PLANE BISECTS THE AXIS OF THE
CYLINDER.DRAW ITS FRONT VIEW,SECTIONAL TOP VIEW,SECTIONAL SIDE VIEW AND TRUE SHAPE OF
SECTION.

6.A CONE ,BASE 50mm DIAMETER AND AXIS 65mm LONG,RESTS WITH ITS BASE ON HP.IT IS CUT BY A
SECTION PLANE PERPENDICULAR TO VP,INCLINED AT 450 TO HP AND PASSING THROUGH A POINT
ON THE AXIS 35mm ABOVE THE BASE.DRAW THE SECTIONAL TOP VIEW,SECTIONAL SIDE VIEW AND
TRUE SHAPE OF SECTION.

You might also like