Scribd
Upload
102 views2 pages

Koike-Picle 1 Catalog

The Picle-1 is a manual pipe cutting machine that uses a chain drive system to allow for a frictionless feed when trimming and beveling pipes between 5-50mm thick. It features adjustable torch brackets with an angle scale for bevel cuts of various degrees. The transmission chain uses interlocking links for easy insertion and removal, allowing fast adjustment for different pipe diameters.

Uploaded by

Mazin Mohammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views2 pages

Koike-Picle 1 Catalog

The Picle-1 is a manual pipe cutting machine that uses a chain drive system to allow for a frictionless feed when trimming and beveling pipes between 5-50mm thick. It features adjustable torch brackets with an angle scale for bevel cuts of various degrees. The transmission chain uses interlocking links for easy insertion and removal, allowing fast adjustment for different pipe diameters.

Uploaded by

Mazin Mohammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Picle-1

The Picle-1 is a manual driven portable pipe cutting


machine for trimming and beveling pipes. The chain drive
is effected over a large worm and a worm wheel. The low
transmission ratio leads to an absolutely frictionless feed.
The transmission chain consists of simply constructed,
smoothly interlocking chain links. Due to the chain link’s
easy insertion and removal a fast exchange for varying
pipe diameter is guaranteed. The adjustments for bevel
cutting result from an angle scale at the torch bracket.
Picle-1
n Standard chain for cutting pipe diameter of 114 - 600 mm
Cutting thickness 5-50 mm
n Extension chain (1 m) for large pipe diameter Type of drive manually
n The low transmission ratio leads to an absolutely frictionless Height 400 mm
feed. Track width 230 mm
n The torch adjustments for bevel cutting are effected over an Type of gas Acetylene, propane, natural gas and mapp
gas
angle scale.
Weight 9,0 kg
n Easy operation and attendance
n Low weight
Scope of delivery:

n Cutting machine Picle 1


n Cutting nozzles (5-30 mm material thickness)
n Tool set
n Operation instructions

KOIKE EUROPE B.V. KOIKE Engineering Germany GmbH


Grote Tocht 19 • 1507 CG Zaandam, Holland Pappelweg 8 • 61169 Friedberg, Deutschland
Tel. +31 (0) 75 6 12 72 27 Tel. +49 (0) 6031 1615 71 -00
Fax. +31 (0) 75 6 70 22 71 Fax. +49 (0) 6031 1615 71 -01
www.koike.nl • [email protected] www.koike-engineering.com • [email protected]

You might also like