Scribd
Upload
75 views

For Pressure Vessels and Columns (Bidding Stage)

The document provides comments and queries on a client's scope of work for bidding stage design of pressure vessels, columns, and heat exchangers. For pressure vessels and columns, basic mechanical design and bill of materials will be provided, along with sketches for self-reinforcing nozzles. For heat exchangers, preliminary process design data and calculations will be shared, along with basic bills of materials and sketches for nozzles. Technical delivery conditions and applicable codes/standards will be provided for budgeting purposes. Native design files will be shared once invoices are cleared.

Uploaded by

SYedZYnAle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
75 views

For Pressure Vessels and Columns (Bidding Stage)

The document provides comments and queries on a client's scope of work for bidding stage design of pressure vessels, columns, and heat exchangers. For pressure vessels and columns, basic mechanical design and bill of materials will be provided, along with sketches for self-reinforcing nozzles. For heat exchangers, preliminary process design data and calculations will be shared, along with basic bills of materials and sketches for nozzles. Technical delivery conditions and applicable codes/standards will be provided for budgeting purposes. Native design files will be shared once invoices are cleared.

Uploaded by

SYedZYnAle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Comments / Queries on the client’s scope of work

1. For Pressure Vessels and Columns (Bidding Stage)

Comments are arranged as per the bullet numbers provided in the client’s scope of work.

1. Basic Mechanical Design required for costing will be shared detailed material list will be shared
in detail engineering phase.
2. Gross Bill of materials will be shared, material weight, Nozzle schedule, nozzle elevations, and
other non-pressure parts weight etc
3. Sketches for self reinforce nozzle will be provided in bidding stage.
4. For the special vendor items client shall provide their approved vendor’s list, also the design and
procurement of the internals such as demisters, coalescers, trays, seperators etc.
5. Technical delivery conditions shall be provided to procure materials and this shall be as per
client’s specifications and applicable codes and standards for budgeting purposes only.
6. Acceptable
7. Acceptable
8. Acceptable
9. Acceptable
10. Our team will be needed company standards during bidding and detail engineering phase to
make sure our design shall comply company’s requirement.
11. Acceptable
12. Acceptable
13. Acceptable
14. As per the clause 2.2.1 of ASME Section VIII division 2, client shall provide the User’s design
specification and it shall be signed by PE.
15. Acceptable. Native files will be shared once the Invoices of our company shall be cleared by
company.
16. General comment: client specification shall be required during bidding phase design
17.
2. Bid stage design of Heat Exchangers
1. Preliminary process / thermal design datasheet /HTRI report will be shared to the client.
2. preliminary Mechanical Design Calculations will be shared
3. Basic bill of materials required for budgeting and cost estimation shall be shared to client.
4. Sketches for self reinforce nozzle will be provided in bidding stage.
5. BOM shall be provided (tube bundle weight, base metal weight, external coils, and internals and
tracing jackets etc.
6. Technical delivery conditions shall be provided to procure materials and this shall be as per
client’s specifications and applicable codes and standards for budgeting purposes only.
7. Acceptable
8. Acceptable
9. Test ring assembly weight shall be provided details and drawings will be provided in detail
engineering phase.
10. U bending schedule shall be provided in detail engineering phase.
11. acceptable
12. Saddle details for stacking equipment will be provided in detail engineering phase, approximate
weight will be provided in bid stage.
13. Acceptable
14. Acceptable
15. Acceptable
16. Acceptable
17. Acceptable
18. Acceptable
19. Acceptable. Native files will be shared once the Invoices of our company shall be cleared by
company
20. General comment: client specification shall be required during bidding phase design
21.

You might also like