Scribd
Upload
137 views

Sagem Com

The CCU Fpga cannot be downloaded. Switching to the previous shelf pack or changing the CCU board may resolve the issue. Traffic is still running but protections are not. Only change the CTRL card or download from the specified IP address.

Uploaded by

Anonymous Gh44zhfF
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
137 views

Sagem Com

The CCU Fpga cannot be downloaded. Switching to the previous shelf pack or changing the CCU board may resolve the issue. Traffic is still running but protections are not. Only change the CTRL card or download from the specified IP address.

Uploaded by

Anonymous Gh44zhfF
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

Ccu Fpga cannot be downloaded.

Switch to previous shelf pack


If no success, change the CCU board (Shelf must be powered off/on).

Be Carefull, traffic is On, But protections are not running !!!


Don't Touch the Cards other than CTRL Card

The previous CTRL software version was


CTRL Card Flash Packs
Current Reserve
Shelf Pack 252019905-hd(P3.2.2) (P3.2.2)
GIG-E Pack 251498988-cl
GFP150-eXtra Pack 252031401-fv
GFP2500-eXtra Pack 3000287584-fm
Change CTRL Card or :
Download, Switch From HTTP (IP Address = 135.10.114.11 Mask = 255.255.0.0)

See Chapter -DEGRADED MODE- in -ADR2500 eXtra Installation and user guide-
for more information.

1 - Switch GIG-E Pack


2 - Switch and Reset GIG-E Pack
3 - Switch GFP150-eXtra Pack
4 - Switch and Reset GFP150-eXtra Pack
5 - Switch GFP2500 Pack
6 - Switch and Reset GFP2500 Pack
7 - Switch and Reset Shelf Pack
8 - Start CTRL Code
>8
Start CTRL Code
Are you Sure (y/n)?
>y
val rsr = 00000003
Section, CCU Fpga must be Loaded
Section, CCU Fpga Loading
f_Hweq_GetComposant - Slot=27 Fpga=1 Spi=1 Component=3
f_Hweq_GetFpgaDone - Slot=27 Fpga=1 Spi=1 Component=5 Done=1
Section, CCU Fpga Loaded but do not respond
Section, CCU SRAM test failed
Shelf Cold Reset
Reset Perf Log
SRAM CCU: size = 2 Mo, used = 0x0017e8f4 (01566964)
SRAM CTRL: size = 1 Mo, used = 0x000bd5b8 (00775608)
System : 0x0079d9bc used= 0x0000009c (00000156)
NoInitHot : 0x01b69800 used= 0x00072330 (00467760)
Database : 0x01a5d000 used= 0x0010c528 (01099048)
Trace : 0x09100000 used= 0x00009e68 (00040552)
Perf : 0x09110000 used= 0x000b3750 (00735056)
get database from CTRL FLASH
get FLASH database (current) from CTRL

SAGEM ADR2500 eXtra P3.2.2


Shelf Pack : 252019905-hd
GIG-E Pack: 251498988-cl
GFP150-eXtra Pack: 252031401-fv
GFP2500 Pack: 3000287584-fm
Flash database must be updated
Ethernet Transceiver Speed: 100 BaseT Full duplex
SAGEM ADR2500 eXtra -
SPACE : refresh, ESC : previous, / : main menu
MAIN MENU

1 - Equipment IP address configuration


2 - Ethernet interface configuration
3 - Reboot equipment
4 - Logout
5 - Ping IP address
6 - Trace route to IP address

Choice ? 3

Granted supervisor level


Do you confirm that you want to reboot this equipment (y/n) ? y
Database Updated
Resetting target ...
1 Bloc: 252 Level: 254 Date: 29/09/2017 18:06:02
File: Main_Root.cpp Line: 1079
ROOT: 'TWdg en attente'
Data1: 00 06 2e 81

The Version of System Startup Is : 251498657-ac


Loading application, version 252019905-hd
Decompressing Program (gzip), please wait
End of decompression
Select file : Shelf Pack (a)
f_Hweq_GetComposant - Slot=28 Fpga=1 Spi=1 Component=3

CTRL Fpga has been downloaded

main_root : CTRL FPGA has been fully loaded


Mode Verbose : OFF
RAM disk initialized - size = 400000 (4194304) byte
f_Hweq_GetFpgaDone - Slot=27 Fpga=1 Spi=1 Component=5 Done=1
Check Fpga CCU is not operational
f_Hweq_GetComposant - Slot=27 Fpga=1 Spi=1 Component=3
f_Hweq_GetFpgaDone - Slot=27 Fpga=1 Spi=1 Component=5 Done=1

CCU Fpga has been downloaded


f_Hweq_GetFpgaDone - Slot=27 Fpga=1 Spi=1 Component=5 Done=1
Check Fpga CCU is not operational

Ccu Fpga cannot be downloaded.


Switch to previous shelf pack
If no success, change the CCU board (Shelf must be powered off/on).

Be Carefull, traffic is On, But protections are not running !!!


Don't Touch the Cards other than CTRL Card

The previous CTRL software version was


CTRL Card Flash Packs
Current Reserve
Shelf Pack 252019905-hd(P3.2.2) (P3.2.2)
GIG-E Pack 251498988-cl
GFP150-eXtra Pack 252031401-fv
GFP2500-eXtra Pack 3000287584-fm
Change CTRL Card or :
Download, Switch From HTTP (IP Address = 135.10.114.11 Mask = 255.255.0.0)

See Chapter -DEGRADED MODE- in -ADR2500 eXtra Installation and user guide-
for more information.

1 - Switch GIG-E Pack


2 - Switch and Reset GIG-E Pack
3 - Switch GFP150-eXtra Pack
4 - Switch and Reset GFP150-eXtra Pack
5 - Switch GFP2500 Pack
6 - Switch and Reset GFP2500 Pack
7 - Switch and Reset Shelf Pack
8 - Start CTRL Code
>

You might also like