Scribd
Upload
328 views1 page

06,250 (-1), 260 To 240 RS-232 Communications Wiring Diagram: Technotes

This document provides a communications wiring diagram and recommendations for RS-232 and RS-422 connections between a master CPU and single or multiple slave CPUs. It notes that only one slave is allowed for RS-232 connections but multiple slaves require RS-422. It recommends using shielded twisted pair cable like Belden 9855 for RS-422 connections and includes port specifications and protocols supported.

Uploaded by

warwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
328 views1 page

06,250 (-1), 260 To 240 RS-232 Communications Wiring Diagram: Technotes

This document provides a communications wiring diagram and recommendations for RS-232 and RS-422 connections between a master CPU and single or multiple slave CPUs. It notes that only one slave is allowed for RS-232 connections but multiple slaves require RS-422. It recommends using shielded twisted pair cable like Belden 9855 for RS-422 connections and includes port specifications and protocols supported.

Uploaded by

warwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNOTES

06,250(-1),260 to 240 RS-232 Communications wiring Diagram


Product group: 205 series
Information Type: Communications
Last revised : 3 Dec, 2002

Multiple Slaves require RS-422


communications.
It is highly recommended that you
use a Belden 9855 shielded
twisted pair cable or equivalent

PWR RUN
Master CPU Slave CPU
Only one slave is allow ed with BATT CPU

DL250 RS232 communications. (point to RUN


point). DL240
CP U For multiple slaves use the RS422 CPU TERM
communications. CH1

CH2
Port0 250 Port 2 240 Port 2
RS232 Pinout RS232 Pinout CH3
GND 7 CH4
CTS 5
Port1
RTS 4 1 GND

RX 3 Port2
3 RX
TX 2 4 TX

Port 2 Specs : Port 2 Specs :


Software Configurable Software Configurable
15-pin SVGA connector 6P6C phone jack connector
RS-232C / RS-422 RS-232C
300 / 1200 / 4800 / 9600 / 19.2K/ 38.4K Baud 300 / 1200 / 9600 / 19.2K Baud
Parity = Odd / Even or None Parity = Odd or None
Address (1-90, 1-5A Hex) Address (1-90, 1-5A Hex)
8 Data bits, 1 start , 1 stop bit 8 Data bits, 1 start , 1 stop bit
Asynchronous, Half Duplex, DTE Asynchronous, Half Duplex, DTE
Remote I/O Remote I/O

Protocols : Protocols :
K-sequence slave K-sequence slave
DirectNet Master / Slave DirectNet Master / Slave
Modbus RTU Master / Slav e

Tech Supp o r t
250_240.vsd

You might also like