Scribd
Upload
247 views

PC Specifications For Prestressing Strand PDF

This document provides specifications for prestressing strand including nominal diameters, tolerances, minimum breaking strengths, minimum yield strengths at 1% extension, nominal areas, and nominal weights for various grades of seven-wire uncoated low relaxation strand that meet ASTM A416 standards. It also lists maximum relaxation properties of 2.5% after 1000 hours at an initial stress of 70% guaranteed ultimate tensile strength (G.U.T.S.) and 3.5% after 1000 hours at 80% G.U.T.S.

Uploaded by

Toll JAPEK 2
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
247 views

PC Specifications For Prestressing Strand PDF

This document provides specifications for prestressing strand including nominal diameters, tolerances, minimum breaking strengths, minimum yield strengths at 1% extension, nominal areas, and nominal weights for various grades of seven-wire uncoated low relaxation strand that meet ASTM A416 standards. It also lists maximum relaxation properties of 2.5% after 1000 hours at an initial stress of 70% guaranteed ultimate tensile strength (G.U.T.S.) and 3.5% after 1000 hours at 80% G.U.T.S.

Uploaded by

Toll JAPEK 2
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 

SPECIFICATIONS FOR PRESTRESSING STRAND – TECHNICAL DATA 
 
 
ASTM A416 – SEVEN‐WIRE UNCOATED LOW RELAXATION STRAND 
Minimum  Min. Yield  Nominal 
Strand  Breaking  Strength at 1%  Minimum  Nominal  Weight 
Nominal Strand  Tolerance  Strength Lbs  Extension Lbs  Elongation at  Area In2  Lbs/1000 ft 
Grade  Diameter in [mm]  in [mm]  [kgs]  [kgs]  24” Gauge  [mm2]  Kg/1000 m 
3/8”  0.3910/0.3590  20,000 18,000 0.080  272
[9.5]  [9.93/9.13]  [9,072]  [8,165]  [51.61]  [405] 
7/16”  0.4535/0.4215  27,000 24,300 0.108  367
250K  3.5% 
[11.1]  [11.51/10.71]  [12,247]  [11,022]  [69.68]  [548] 
1/2”  0.5160/0.4840  36,000 32,400 0.144  490
[12.7]  [13.1/12.3]  [16,329]  [14,696]  [92.9]  [730] 
3/8”  0.4010/0.3690  23,000 20,700 0.085  290
[9.5]  [10.18/9.38]  [10,433]  [9,389]  [55.03]  [432] 
7/16”  0.4635/0.4315  31,000 27,900 0.115  390
[11.1]  [11.76/10.96]  [14,061]  [12,655]  [74.19]  [582] 
1/2”  0.5260/0.4940  41,300 37,170 0.153  520
[12.7]  [13.35/12.55]  [18,733]  [16,860]  [98.71]  [775] 
270K  3.5% 
0.52” (1/2”HBS)  0.5460/0.5140  45,000 40,500 0.165  563
[13.2]  [13.86/13.06]  [20,412]  [18,368]  [106.45]  [874] 
9/16”  0.5885/0.5565  51,700 46,530 0.192  650
[14.3]  [14.94/14.14]  [23,451]  [21,102]  [123.87]  [967] 
0.6”  0.6260/0.5940  58,600 52,740 0.217  740
[15.2]  [15.89/15.09]  [26,581]  [23,922]  [140.00]  [1,102] 
 
RELAXATION PROPERTIES 
Initial Stress  Maximum Relaxation after 1000 Hours 
70% G.U.T.S. 2.5%
80% G.U.T.S. 3.5%
 

SUMIDEN WIRE PRODUCTS CORPORATION  Specifications for Prestressing Strand – Technical Data  1 

You might also like