Scribd
Upload
70 views4 pages

Heat Mover Vent: Designers and Specifier's Technical Manual

Zefyr Heat Mover ventilator range is designed for removal of high heat problems from industrial buildings. Designed with a high discharge coefficient, these ventilators are tried, tested and proven on many installations throughout the world. Application The Heat Mover is designed specifically for power plants, aluminium smelters and industrial complexes where low silhouette natural ventilation is the logical choice.

Uploaded by

Jose Mello
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views4 pages

Heat Mover Vent: Designers and Specifier's Technical Manual

Zefyr Heat Mover ventilator range is designed for removal of high heat problems from industrial buildings. Designed with a high discharge coefficient, these ventilators are tried, tested and proven on many installations throughout the world. Application The Heat Mover is designed specifically for power plants, aluminium smelters and industrial complexes where low silhouette natural ventilation is the logical choice.

Uploaded by

Jose Mello
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

“Innovative building solutions

for a sustainable environment”

Heat Mover Vent


Designers and Specifier’s Technical Manual
Home Farm, Stockton Road, Abberley,
Worcestershire, United Kingdom,
WR6 6AS
Tel (+44) 0870 6001356 Fax (+44) 0870 6001357
[email protected] www.zefyrgroup.com

© Zefyr Group 2002

© Zefyr Group 2001-2002


Heat Mover Vent
Introduction
The Zefyr Heat Mover Ventilator range is designed for removal of high heat problems from
industrial buildings where structural limitations do not allow the installation of the
more efficient Zefyr HCD or monitor type ventilators.
The Heat Mover is a low profile, fully weather proof, operable
ventilator which can be readily installed in multiple
lengths depending on the building structure.
Designed with a high discharge coefficient, these
ventilators are tried, tested and proven on many
installations throughout the world.
Application
The Heat Mover is designed specifically for power
plants, aluminium smelters and industrial complexes
where low silhouette natural ventilation is the logical
choice.
The Heat Mover ventilator is particularly suited for lighter weight
applications where wind and dead loading factors are an important
consideration in the overall building design.
Installation
The Heat Mover is quick and easy to install
with all components pre-fabricated prior to
despatch. Comprehensive assembly
instructions are supplied with each order.
Construction
The vent can be manufactured from Versacor,
Armacor, HP200 Plastisol or Aluminium. The
units are designed to have a long maintenance-
free life under the most arduous of conditions.
Other material specifications are available
subject to their suitability for the work
environment – for more details contact your
local Zefyr agent/office for advice.

Zefyr Group
Home Farm, Stockton Road, Abberley, Worcestershire, WR6 6AS, UK. Tel +44 (0)870 600 1356 Fax +44 (0)870 600 1357
E-mail [email protected] Website www.zefyrgroup.com
Heat Mover Vent
Performance
This latest development of the Zefyr Heat Mover ventilator has been designed and tested to
give maximum weather protection with the least resistance to air flow. The unique design of the splitter baffles and
gutters provides each unit with a minimum 65% free opening area and exceptional coefficient of discharge.
Fully certified full scale testing and more than 80 years product development and installations world-wide ensure
optimum performance.

Air Flow Characteristics –


The Heat Mover has been full scale tested for airflow characteristics as an exhaust ventilator.
It offers exceptionally low resistance to air flow for a low profile ventilator –
Cd = 0.45 for the base unit
Cd = 0.4 for the acoustically treated unit

Weather Protection –
The Heat Mover has been tested in accordance with international standards accredited to DIN13030 – to prove
performance in excess of 99.9% at air speeds of up to 18m/s.

Acoustic Performance

The Heat Mover due to its unique geometry offers exceptional acoustic performance with the option of
acoustic treatment to the upper roof assembly and to the vent body.

63 125 250 500 1k 2k 4k R´w opening R´w body


3m above 3m to side
5 5 7 17 25 27 28 21 dB 27 dB with acoustic roof
7 5 12 18 29 30 31 23 dB 33 dB with acoustic roof and body

Structural –
Proven for wind and snow loading to DIN1055 Part 4 – suitable for applications over 100m high under extreme
conditions.

Zefyr Group
Home Farm, Stockton Road, Abberley, Worcestershire, WR6 6AS, UK. Tel +44 (0)870 600 1356 Fax +44 (0)870 600 1357
E-mail [email protected] Website www.zefyrgroup.com
Heat Mover Vent
Unit Sizes

The Heat Mover is manufactured in standard widths of 1.0m,1.5m, 2.0m, 2.5m, 3.0m m and variable lengths from 2.0
m to 6.0 m. The units can be installed side by side or end to end depending on the building layout.

Model Width Height


HM1000 1000mm 300mm
HM1500 1500mm 405mm
HM2000 2000mm 538mm
HM2500 2500mm 538mm
HM3000 3000mm 538mm
HM6000 6000mm 538mm

Operation
The dampers on this vent can be operated electrically or pneumatically to suit the application.
Maintenance
Visual inspection recommended every three months.

Zefyr Group
Home Farm, Stockton Road, Abberley, Worcestershire, WR6 6AS, UK. Tel +44 (0)870 600 1356 Fax +44 (0)870 600 1357
E-mail [email protected] Website www.zefyrgroup.com

You might also like