Scribd
Upload
236 views40 pages

Lecture 1 - Fluid Power - An Introduction PDF

The document discusses fluid power systems which use pressurized liquids or gases to generate and transmit forces and motion. It explains that fluid power includes both hydraulic systems which use liquids like oil, and pneumatic systems which use compressed air. The document then covers various applications of fluid power systems and their components, advantages, and the basic types of fluids used like petroleum-based oils, emulsions, water glycol, synthetic fluids, and vegetable oils. It also discusses factors that influence fluid selection.

Uploaded by

bmdbmdbmd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
236 views40 pages

Lecture 1 - Fluid Power - An Introduction PDF

The document discusses fluid power systems which use pressurized liquids or gases to generate and transmit forces and motion. It explains that fluid power includes both hydraulic systems which use liquids like oil, and pneumatic systems which use compressed air. The document then covers various applications of fluid power systems and their components, advantages, and the basic types of fluids used like petroleum-based oils, emulsions, water glycol, synthetic fluids, and vegetable oils. It also discusses factors that influence fluid selection.

Uploaded by

bmdbmdbmd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 40

Fluid Power

Learning Objectives
Fluid Power
• Fluid power is the technology that deals with the
generation, control and transmission of forces and
movement of mechanical element or system with the use
of pressurized fluids in a confined system.

• Both liquids and gases are considered fluids. Fluid power


system includes a hydraulic system (hydra meaning water
in Greek) and a pneumatic system (pneuma meaning air in
Greek).

• Oil hydraulic employs pressurized liquid petroleum oils and


synthetic oils, and pneumatic employs compressed air that
is released to the atmosphere after performing the work.
Fluid power applications
• Stationary hydraulics
Fluid power applications
• Mobile hydraulics
More applications of fluid power
More applications of fluid power
More applications of fluid power
More applications of fluid power
More applications of fluid power
Classification of Fluid Power Systems

• Based on the control system


– Open-loop system
– Closed-loop system

• Based on the type of control


– Fluid logic control
– Electrical control
– Electronic control
Advantages of a Fluid Power System
• Fluid power systems are simple, easy to operate
and can be controlled accurately
• Multiplication and variation of forces
• Multifunction control
• Low-speed torque
• Constant force or torque
• Economical
• Low weight to power ratio
• Fluid power systems can be used where safety is
of vital importance
Basic Components of a Hydraulic
System
Components of a hydraulic system
(shown using symbols)
Basic Components of a Pneumatic
System
Comparison between Hydraulic and
Pneumatic Systems
Comparison of different power systems
Fill in the Blanks
State True or False
Answers
Functions of Hydraulic Fluids
Various properties required for an
ideal hydraulic fluid
Ideal Viscosity
Ideal Viscosity
Lubrication Capability
Lubrication Capability
Demulsibility
• The ability of a hydraulic fluid to separate
rapidly from moisture and successfully resist
emulsification is known as “demulsibility.”
• If an oil emulsifies with water, the emulsion
promotes the destruction of lubricating and
sealant properties.
• Highly refined oils are basically water resistant
by nature.
FireResistance
Good Heat Dissipation
If the fluid overheats, it may cause the following:
Additives in Hydraulic Fluids
• Pour point depressant
• Viscosity index improvers
• Defoamers(anti-foam additives)
• Oxidation inhibitors
• Corrosion inhibitors
• Anti-wear additives
• Load-carrying capacity
Types of Hydraulic Fluids
• Petroleum-based fluids
Types of Hydraulic Fluids
• Emulsions
• Emulsions are a mixture of two fluids that do not
chemically react with others. Emulsions of petroleum-
based oil and water are commonly used. An emulsifier
is normally added to the emulsion, which keeps liquid
as small droplets and remains suspended in the other
liquid.
– Oil-in-water emulsions
– Water-in-oil emulsions
Types of Hydraulic Fluids
Water glycol
• Water glycol is another nonflammable fluid commonly used in
aircraft hydraulic systems.
• It generally has a low lubrication ability as compared to mineral oils
and is not suitable for high-temperature applications.
• It has water and glycol in the ratio of 1:1.
• Because of its aqueous nature and presence of air, it is prone to
oxidation and related problems. It needs to be added with oxidation
inhibitors.
• Enough care is essential in using this fluid as it is toxic and corrosive
toward certain metals such as zinc, magnesium and aluminum.
• Again, it is not suitable for high-temperature operations as the
water may evaporate.
• However, it is very good for low-temperature applications as it
possesses high antifreeze characteristics.
Types of Hydraulic Fluids
• Synthetic fluids
– Synthetic fluid, based on phosphate ester, is another
popular fire-resistant fluid.
– It is suitable for high-temperature applications, since it
exhibits good viscosity and lubrication characteristics.
– It is not suitable for low-temperature applications.
– It is not compatible with common sealing materials such as
nitrile.
– Basically being expensive, it requires expensive sealing
materials (viton).
– In addition, phosphate ester is not an environmental-
friendly fluid.
– It also attacks aluminum and paints.
Types of Hydraulic Fluids
• Vegetable oils
– Vegetable-based oils are biodegradable and are
environmental safe.
– They have good lubrication properties, moderate
viscosity and are less expensive.
– They can be formulated to have good fire resistance
characteristics with certain additives.
– Vegetable oils have a tendency to easily oxidize and
absorb moisture.
– The acidity, sludge formation and corrosion problems
are more severe in vegetable oils than in mineral oils.
– Hence, vegetable oils need good inhibitors to
minimize oxidation problems.
Types of Hydraulic Fluids
• Biodegradable hydraulic fluids
• As more and more organizations are understanding their
social responsibility and are turning toward eco-friendly
machinery and work regime, a biodegradable hydraulic
fluid is too becoming a sought after product in the dawn of
an environmentalist era.
• Biodegradable hydraulic fluids, alternatively known as bio-
based hydraulic fluids
• Bio-based hydraulic fluids use sunflower, rapeseed,
soybean, etc., as the base oil and hence cause less pollution
in the case of oil leaks or hydraulic hose failures.
• These fluids carry similar properties as that of a mineral
oil–based anti-wear hydraulic fluid
Factors Influencing the Selection of a
Fluid
Fill in the Blanks
• 1. The ability of a hydraulic fluid to separate
rapidly from moisture and successfully resist
emulsification is known as _________ .
• 2. The neutralization number is a measure of the
________of hydraulic oil.
• 3. Emulsions are a mixture of two fluids which
________chemically react with others.
• 4. Rust is a chemical reaction between iron or
steel and _________.
• 5. The incompressibility of a fluid is a measure of
its _________.
State True or False
1. Synthetic fluids can have a relative density
greater than 1.
2. Viscosity index improvers are short–chain
polymers.
3. Viscosity index is the arbitrary measure of a fluid
resistance to viscosity change with temperature
changes.
4. Mineral oils or petroleum-based oils easily react
with oxygen.
5. Rust is a chemical reaction between a metal and
an acid.
Answers

You might also like