Scribd
Upload
35 views1 page

Investigation of The Mechanical Properties of Fenicrmnsi High Entropy Alloy Wear Resistant

The document summarizes an investigation into the mechanical properties of a FeNiCrMnSi high entropy alloy for wear resistance applications. Microstructure, hardness, and wear resistance of the alloy were examined. The alloy was produced using medium induction furnace and silicon was chosen as an alloying element. The alloy exhibited a dendritic microstructure without intermetallic compounds or separated silicon particles. Testing found the alloy had a medium hardness of 948.33 HV and friction coefficient of 0.6655 initially reducing to 0.5425 after 1667 seconds. The volume loss of the alloy after testing was 0.0557 mm3.

Uploaded by

Buluc Gheorghe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
35 views1 page

Investigation of The Mechanical Properties of Fenicrmnsi High Entropy Alloy Wear Resistant

The document summarizes an investigation into the mechanical properties of a FeNiCrMnSi high entropy alloy for wear resistance applications. Microstructure, hardness, and wear resistance of the alloy were examined. The alloy was produced using medium induction furnace and silicon was chosen as an alloying element. The alloy exhibited a dendritic microstructure without intermetallic compounds or separated silicon particles. Testing found the alloy had a medium hardness of 948.33 HV and friction coefficient of 0.6655 initially reducing to 0.5425 after 1667 seconds. The volume loss of the alloy after testing was 0.0557 mm3.

Uploaded by

Buluc Gheorghe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

EUROINVENT International Conference on Innovative Research

ICIR 2016 Iasi, 19th–20th of May 2016

Investigation of the mechanical properties of


FeNiCrMnSi high entropy alloy wear resistant

Gheorghe Buluc1*, Iulia Florea1, Romeu Chelariu1,


Gabriela Popescu2, Ioan Carcea1
1
Gheorghe Asachi Technical University of Iasi, Romania
2
Polytehnic Universityof Bucharest, Romania
*
[email protected]

Abstract.In this paper we investigated microstructure, hardness and wear
resistance   for   FeNiCrMnAl,   high   entropy   alloy.   The   FeNiCrMnSi,   high
entropy alloy was elaborated in a medium induction furnace, by choosing
the silicon, as an alliance element within the equi­atomic high entropy alloy,
we managed to obtain a dendritic structure, the formation of intermetallic
compounds   or   separated   silicon.   The   medium   hardness   value   of   the
investigated alloy was 948.33 HV and the medium value of the friction
coefficient was 0.6655 in the first 20 seconds and 0.5425 for 1667 seconds.
The volume loss of the high entropy alloy FeNiCrMnSi was 0.0557 mm3. 

Keywords: high entropy alloy, microstructure, wear resistance, hardness,


properties.

References:
[1] B.S Murty, J.W. Yeh, S. Ranganathan,  High Entropy Alloys, 2014, Elsevier.
[2] Dávid S. Molnár, 2015, ELTE

17

You might also like