Scribd
Upload
47 views

It Should Combines Mechanism(s) With Power Input

The document outlines minimum requirements for a mechanism design that includes a CAD drawing marking the point of interest and inputs, a kinematic analysis of motion and forces, and materials and sizing of components based on a real application load along with calculations of required power input.

Uploaded by

litrakhan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
47 views

It Should Combines Mechanism(s) With Power Input

The document outlines minimum requirements for a mechanism design that includes a CAD drawing marking the point of interest and inputs, a kinematic analysis of motion and forces, and materials and sizing of components based on a real application load along with calculations of required power input.

Uploaded by

litrakhan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

It should combines mechanism(s) with power input.

Minimum requirements:

 CAD drawing. One of the drawings should clearly mark the point of interest, load, input
force/torque etc.
 Kinematic analysis (motion, velocity, acceleration, jerk for cam if a cam is involved).
 Materials and sizing of components (force analysis will be needed). Calculation of needed
force/torque power input.
 The above design/calculation is based on real application load/size.

You might also like