Scribd
Upload
172 views

ADLCONF Release Notes

The document provides release notes for multiple versions of ADLCONF configuration software. It describes new features, fixes, and enhancements for programming radios and supporting various modem and receiver models across different releases.

Uploaded by

AhmedOuryJalloh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views

ADLCONF Release Notes

The document provides release notes for multiple versions of ADLCONF configuration software. It describes new features, fixes, and enhancements for programming radios and supporting various modem and receiver models across different releases.

Uploaded by

AhmedOuryJalloh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ADLCONF Configuration Software Release Notes

Version 4.16.0001, ID#1592, June 2017

ID# Description
1592 Programming a radio automatically sets the tuning resolution to 12.5 kHz. This resets
any radio that was inadvertently misconfigured
1531 Supports radio operation in the Republic of Korea

Version 4.10.0001, April 2016

ID# Description
1189 Turn off antenna detection feature by default
1231 Set empty call sign as default on the "Create new .dat file" screen
1248 Display XDL Micro board S/N on ID page
1332 Set Disable Antenna Detection and Data Packets Received as defaults
1355 Allow creation of new .dat files for XDL modem with Max TX power = 2 Watts
1356 Displays correct serial numbers for XDL Micro modems
1522 Updated User Guides in Help

Version 4.06.0001, October 2015

ID# Description
1378/1474 Improved support for XDL Rover 2
1412 Support programming ADL Vantage Pro radios to frequencies between 470 and 473
MHz (inclusive)
1430 Support for modems inside Trimble R8S
1433 Support for ADL Vantage 35

Version 4.04.0002, August 2014

ID# Description
1050 Speed up COM port detection
1249 Allow user to select 0.5, 1 and 2W for XDL Micro
1307 Display XDL Rover 2 I/O board FW
1351 Improved operation when upgrading XDL Rover 2 I/O firmware
1362 Improved COM port support

ADLCONF Release Notes June 2017 Page 1


Version 4.02.0002, July 2013

Key enhancements since the previous release (Version 4.00)


ID# Description
1063 Add support for Spectra/Ashtech GNSS receivers when upgrading radio firmware via a
daisy chain
1114 Enhance the firmware upgrade process
1124 Prevent the programming of XDL modems with unsupported AutoRover modes
1218 ADLCONF supports 10-digit serial numbers

Version 4.00.0100, July 2013

Key enhancement since the previous release (Version 3.04.2149)

ADLCONF version 4.00 supports new FCC regulations governing UHF operation in the United
States beginning in 2013 whereby radios capable of transmitting in 25 kHz channels at radio
links rates slower than 19200 bps can no longer be manufactured in or imported into the US.
ADLCONF version 4.00 includes a “region code.” All radios manufactured by Pacific Crest after
1/1/13 will ship with the US region code that will make it impossible to configure the radio to
transmit in violation of US narrowbanding law. Dealers outside the US will have the tightly
controlled ability to change the region code of radios shipping outside the United States.
Changing to a non-US code will allow dealers to configure radios for operation in 25 kHz
channels at 4800 and 9600 bps, should any of their customers require this.

In addition to changes to support the new US narrowbanding regulations, ADLCONF software


version 4.00 includes the following changes:

ID# Description
988 Dealers can write configuration files (*.frq) containing: region code, channel
bandwidth, a channel table including TX frequencies and the maximum TX power
986 Support for connection to radio via Bluetooth
984 ADLCONF now supports XDL radios (XDLCONF has therefore been discontinued)
834 Support for XDL modems’ 10-digit serial numbers when creating serial numbers
938 Improved AutoRover 2 feature supports scanning for signals transmitted once every 1
or 2 seconds
836 Can now create channel tables with gaps in them, e.g., a table with channels 1-5 and
7-10
922 Radios can now be configured for repeater delays as long as 60 seconds (60,000 ms)
Various The Restore Factory Defaults feature has been removed
990 The Disable TX feature has been removed
922 Support for repeater delays up to 60 seconds
1013 Includes U-Link radio protocol support
1049 Simplified released version number system

ADLCONF Release Notes June 2017 Page 2

You might also like