EchoLife HG865 GPON Terminal

Quick Start
EchoLife HG865 GPON Terminal

V100R001

Quick Start

Issue 05

Date 2010-09-25

Part Number 31504262

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support
and service. For any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Huawei Industrial Base
Bantian, Longgang
Address:
Shenzhen 518129
People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of
their respective holders.

Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
the statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.
 Precautions
For safety purposes, before operating the device, read the safety precautions carefully.

Basic Requirements

 Keep the device dry during storage, transportation, and running of the device.
 Prevent the device from colliding with other objects during storage,
transportation, and running of the device.
 Install the device in strict compliance with the vendor requirements.
 Do not uninstall the device without permission. Contact the specified service
center when a fault occurs on the device.
 No enterprise or personnel should modify the structure, and security and
performance design of the device without authorization.
 Abide by the local laws and regulations and respect the legal rights of others
when using the device.

Environmental Requirements

 Install the device in a well-ventilated place that is not directly exposed to

sunlight.
 Keep the device clean.
 Keep the device away from water sources or wet places.
 Do not place any objects on the device to prevent the device from being
damaged by heat or weight of the object placed on the device.
 Leave a space of at least 10 cm around the device for heat dissipation.
 Keep the device away from heat sources or bare fire sources, such as electrical
heaters and candles.
 Keep the device away from the electrical appliances with strong magnetic
fields or strong electric fields, such as microwave ovens, refrigerators, and
mobile phones.

Instructions for Cleaning

 Before cleaning the device, stop running it, switch off the power, and remove
all cables, including the power cable, optical fibers, and network cables, from
the device.
 Do not use cleaning fluid or spray-on detergent to clean the case of the
device. Use a soft cloth instead.

1
Precautions

Instruction for Use

 Use the accessories delivered with the device, or use those recommended by
the vendor, such as the power adapter and battery.
 The power supply voltage of the device must meet the requirements on the
input voltage of the device.
 Keep power plugs clean and dry to avoid electric shocks or any other danger.
 Dry your hands before removing or inserting cables.
 Stop the device and switch off the power before removing or inserting cables.
 Switch off the power and remove all the cables, including the power cable,
optical fibers, and network cables, from the device during stormy weather.
 Switch off the power and remove the power plug if the device is shut down
for a long term.
 Do not let water or other liquid contact the device. If such an accident occurs,
switch off the power immediately and remove all the cables, including the
power cable, optical fibers, and network cables, from the device. Contact the
specified service center in case of a device failure.
 Do not stamp, pull, drag, or excessively bend the cables because they may get
damaged, thus leading to a device failure.
 Do not use cables that are damaged or aged.
 Do not stare directly into the optical port on the device to prevent injury to
your eyes.
 In case of any abnormalities, such as smoke, abnormal sound, or odor,
immediately stop the device, switch off the power, and remove all cables,
including the power cable, optical fibers, and network cables, from the device.
Contact the specified service center in case of a device failure.
 Prevent foreign objects such as metal objects from dropping into the device
through the heat dissipation hole.
 Prevent the outer case of the device from being scratched because the paint
that is peeled off in the scratched areas can cause device abnormalities. That
is, if the paint falls into the device it may cause short circuits. In addition, it
can cause an allergic reaction to your body.
 Ensure that the device is kept away from children to prevent risks such as
swallowing the devices or the accessories.

Environment Protection Instructions

 Put the obsolete device and batteries to the specified recycle place.
 Abide by the local laws and regulations to handle the packaging materials,
run-out batteries and obsolete device.

2
Installing the HG865
Unpack the product and check carefully the items listed in the following table. If the
actual items do not match the items listed in the table, please contact the vendor.

No. Item Quantity

1 GPON Terminal 1
2 Power Adapter or Battery Backup Unit 1
3 Ethernet Cable 1
4 Quick Start 1
5 Qualification Card 1

The HG865 can be installed on the wall.

To install the HG865 on the wall, do as follows:
Step 1 Mark the positions of the two holes used for fixing the HG865 on the wall.
The distance between the two holes is 190 mm.
Step 2 Choose an appropriate drill bit according to the outer diameter of the
mounting screw. Drill at the positions marked on the wall by using a percussion drill.
Step 3 Fix the mounting screws at the positions of the holes on the wall by using a
screwdriver.
Step 4 Mount the HG865 vertically onto the mounting screws. The following figures
show the vertical installation of the HG865.

127(
The figures in this document are only for your reference. Though the actual product may
be different, the functions of the product will remain the same.
3
Connecting cables
The connections between the HG865 and other devices are shown as follows.

1
4 7

5
3 6

1 TV 2 Optical interface in the wall 3 PC

4 IP set-top box (STB) 5 Telephone 6 Fax machine
7 Power adapter

4
Connecting cables
Connect the HG865 to the external devices according to the following steps and previous figure.

Connect the CATV interfaces with the interface of TV using the coaxial cable.

Connect the OPTICAL interface to the optical interface on the wall by using the
optical fiber.

Connect the TEL interfaces to the telephone by using a telephone line.

127(
The HG865 can be directly connected to the TEL interfaces and Fax machine. The connection
method is similar to the previously-mentioned steps.

5
Connecting cables
Connect the LAN interfaces to the upstream interface of the switch by using the
Ethernet cable.

127(
The HG865 can be directly connected to other devices, such as PCs and IP set-top boxes (STBs).
The connection method is similar to the previously-mentioned steps.
Plug the power adapter (input voltage: 100 - 240 V AC, output voltage: 11 - 14 V DC)
to the POWER interface of the HG865.

Power on the HG865.

6
 Descriptions of the Indicators
The following table lists the descriptions of the indicators on the front panel.

Indicator Status Description

On The HG865 is powered on.
POWER
Off The HG865 is powered off.
LINK Refer to the next table Refer to the next table.
AUTH Refer to the next table Refer to the next table.
On The device is connected to the Ethernet.
Data is being transmitted through the
GE、FE1~FE3 Blinking
Ethernet interface.
Off The device is not connected to the Ethernet.
On The VoIP function is enabled.
VoIP
Off The VoIP function is disabled.
On The TEL interface is in the call status.
TEL1~TEL2 Blinking The TEL interface is in the ringing status.
Off The TEL interface is idle.
On The CATV function is enabled.
CATV
Off The CATV function is disabled.
Link and Auth are the indicators of the GPON. The status of Link and Auth reflects the
connection between the HG865 and the optical line terminal (OLT). The frequency of fast
blinking is 3 Hz, while the frequency of slow blinking is 1 Hz.
Status
Number Description
LINK AUTH
1 Off Off Initial-state
2 Slow blinking Off Standby-state
3 Fast blinking Slow blinking Serial-Number-state
4 Fast blinking On Ranging-state
5 On On Operation-state (normal working status)
6 Fast blinking Off POPUP-state
7 On Off Emergency-Stop-state
7
FAQs
The POWER indicator is off.
 Check whether the ON/OFF button on the rear panel is pressed.
 Check whether the power adapter matches the HG865.
 Check whether the power connection is correct.

The LINK indicator is off.

 Check whether the optical fiber is connected correctly.
 Check whether there is dirt on the optical connector.
The LINK indicator is on,but the AUTH indicator is off
 The HG865 may not receive the downstream optical signal sent by the
service provider. Contact the service provider for help.

The GE and FE indicator are off.

 Check whether the Ethernet cable delivered with the device is used.
 Check whether the Ethernet cable is connected correctly.
 Check whether the indicator of the network adapter is on.
 Check whether the network adapter works normally: Check whether
there are devices with the ? or ! mark under Network adapters. If there
are such devices, uninstall and then re-install them, or insert the network
adapter into another slot. If the problem remains, insert the network
adapter into another slot.

The VoIP indicator is off.

 Check whether to provision the VoIP service.
 Check whether the phone works in the normal state.
 Check whether the connection of the telephone cable is correct.

The TEL indicator is off.

 Check whether the telephone cable delivered with the device is used.
 Check whether the connection of the telephone cable is correct.
 Check whether the telephone is onhook.
The CATV indicator off.
 Contact the service provider to check that you have subscribed to the CATV
function。

8
 Technical Specifications

Item Specifications
Dimensions (L x W x H) 275mm x 205mm x 46mm
Weight < 915g
Power supply 11 - 14 V DC, 2 A
Power adapter input 100 - 240 V AC，50 - 60 Hz
Power consumption < 15W
Operating temperature 0oC - 40oC
Operating humidity 5% - 95% (non-condensing)

&$87,21
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.

9
 Warranty Card
Thank you for choosing Huawei Technologies Co., Ltd. — a leading telecom
solution provider. To get better services, please read this warranty card carefully, fill
in the required information and preserve this card in good condition.

User information

Personal or company's full name:__________________________________________________

Address/Postal Code:____________________________________________________________

Telephone:_____________________________________________________________________

Email:_________________________________________________________________________

Product Type:___________________________________________________________________

Product Serial Number:___________________________________________________________

Purchase Date:_________________________________________________________________

Invoice Number:________________________________________________________________

Dealer Name:___________________________________________________________________

Dealer's Address:________________________________________________________________

Dealer's Telephone:______________________________________________________________

Preserve well. No reissue.

Dealer's Seal:
 Limited Warranty
Subject to the exclusions contained below, Huawei Technologies Co., Ltd.
(hereinafter referred to as Huawei) warrants its access terminals (“Products”) to
be free from defects in materials and workmanship under normal consumer usage
for one year from the date of purchase of the product ("Warranty period"). During
the warranty period, a Huawei authorized service partner shall remedy defects in
materials and workmanship free of charge.
Special Notice:
(1) The warranty card shall be applicable only after being stamped by the dealer.
(2) The warranty card must be preserved in good condition and free of any scratch
or alteration.
(3) To claim such service for defects that are not included in the following exclusion
terms, the warranty card and the invoice that records the product serial number
shall be presented to a Huawei authorized service partner.
Exclusions:
In any of the following cases, the warranty card becomes unenforceable or
inapplicable without prior notice:
(1) The defects are caused by improper handling in transportation and assembly.
(2) The defects are caused by the fact that the product is dismantled or altered by
anyone that is not from a Huawei authorized service partner.
(3) The defects are caused by the fact that the product is used in a harsh
environment that is not suitable for the operation of the product.
(4) The defects are caused by any force majeure including but not limited to fire,
earthquake, lightning and tsunami.
(5) The defects are caused by the fact that the product is used or handled
improperly, roughly or not as instructed in the applicable User Guide.
(6) The normal wear and tear, including but not limited to the normal wear and tear
of the shell and the power module, shall not be covered by the limited warranty.
(7) The warranty card is altered or illegible, or the product serial number recorded
on the warranty card is inconsistent with the actual one imprinted or labeled on
the product.
In any case that is not covered by this limited warranty or should the warranty
expire, Huawei shall charge for the service(s) claimed for the products if the product
is still remediable. Huawei preserves the right for interpretation of this limited
warranty.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: www.huawei.com
Huawei Technologies Co., Ltd.
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

www.huawei.com