CLIENT

Doc. N°
CONTRACTOR
Job / Doc. N°
CLIENT Location Project Title WBS Rev. Date

Doc. Title Doc. Class Status Page

3 / 4
rev
1 SUBJECT
2 EQUIPMENT 2ND STAGE SUCTION SCRUBBER - AT 51 DEG C & 1.5 BARG
3 TAG NUMBER 11-V-134
4 UNIT / PID 9000-SPWM-D1-PF-ON-SPW1-C00-7500418-PRD-1113
5 VESSEL GEOMETRICAL DATA OPERATING CASE LOW LOW MIN
6 SELECTED CRITERIA SAIPEM
7 SELECTED DIAMETER mm 484 OPERATING PRESSURE bar(g) 1.5
8 SELECTED HEIGHT (TL/TL) mm 2,550 OPERATING TEMPERATURE °C 51.0
9 INLET DEVICE - INLET DIVERTER NOMINAL MASS FLOWRATE kg/h 2,640
10 OUTLET DEVICE - STANDARD VANE PACK DESIGN FACTOR
11 DESIGN MASS FLOWRATE kg/h 2,640
12 Not Used mm ACTUAL DENSITY kg/m³ 1.5

GAS
13 HEAD TOP - ELLIPTICAL NOMINAL / DESIGN VOL FLOW. m³/h 1786 1786
14 HEAD BOTTOM - ELLIPTICAL NOMINAL / DESIGN VOL FLOW. MMSm3/d 0.09 0.09
15 TOTAL CROSS SECTIONAL AREA m² 0.18 ACTUAL VISCOSITY cP 0.011
16 TOTAL VOLUME m³ 0.50 MOLECULAR WEIGHT g/mol 16.38
17 L/D ratio - 5.27 Not used - NO
18 VESSEL DESIGN DATA NOMINAL MASS FLOWRATE kg/h 0
19 DESIGN PRESSURE bar(g) 14.0 DESIGN FACTOR -
20 MATERIAL CS DESIGN MASS FLOWRATE kg/h 0
21 CORROSION ALLOWANCE mm 7.00 ACTUAL LIQUID DENSITY kg/m³ 980
22 LIQUID LOAD CALCULATION 0.00 ACTUAL LIQUID DENSITY °API 12.9

LIQUID
23 PRELIMINARY SIZING TO BE CONFIRMED BY INTERNALS VENDOR OPTIONAL LIGHT LIQ. DENSITY kg/m³
24 NOZZLE SIZING CRITERIA NOMINAL / DESIGN VOL FLOW. m³/h 0.0 0.0
25 DIAMETER in 10 NOMINAL / DESIGN VOL FLOW. m3/d 0.0 0.0
INLET NOZZLE

26 SCHEDULE (STD Default) - STD ACTUAL VISCOSITY cP 1.3

27 THICKNESS mm 9.270 OPTIONAL OUTLET FLOW m³/h
28 CALC / MAX ALLOW. VELOCITY m/s - FOAMING FLUID -
29 CALC / MAX ALLOWABLE ρV² Pa 1400 GAS VELOCITY SIZING CRITERIA
30 DIAMETER in 10 Actual Limit
OUTLET GAS
NOZZLE

31 SCHEDULE (STD Default) - STD CRITICAL VELOCITY (Vc) m/s 1.235

32 THICKNESS mm 9.270 GAS VELOCITY m/s 2.697 5.064
33 CALC / MAX ALLOW. VELOCITY m/s 9.8 - K FACTOR (OVERALL) Dimensionless 2.18 4.10
34 CALC / MAX ALLOWABLE ρV² Pa 141 6000 KWM FACTOR Dimensionless

35 DIAMETER in 2 VESSEL DIAMETER m 0.484 0.353

OUTLET LIQUID

LIQUID IN GAS TO DEMISTER PARTICLE

NOZZLE

36 SCHEDULE (STD Default) - STD SIZE

µm 610
37 THICKNESS mm 3.910 GAS IN LIQUID PARTICLE SIZE µm
38 CALC / MAX ALLOW. VELOCITY m/s 0.00 SIZING NOT APPLICABLE
39 CALC / MAX ALLOWABLE ρV² Pa 0.00 - LEVEL SIZING CRITERIA
40 WEIGHT ESTIMATION Calculated Required
41 SHELL THICKNESS mm 10.5 OVERFILLING (HHLL-TOP) min
42 SHELL WEIGHT kg 320 LIQ. RESIDENCE TIME (BTL - NLL) min
43 2 HEADS WEIGHT kg 42 LIQ. SURGE CAPACITY (LAL - LAH) m³ 0.0
44 INTERNALS WEIGHT kg 36 LIQ. SURGE TIME (LAL - LAH) min
45 TOTAL WEIGHT kg 398 LIQ. SURGE CAPACITY (NLL - LAH) m³ 0.0
46 LIQ. SURGE TIME (NLL - LAH) min
47 HEIGHT AND TIME SIZING CRITERIA AND RESULTS

t calc. on inlet t req. on inlet liquid t calc. on outlet t req. on outlet

48 ∆h [mm] ∆h Required [mm] Volume [m³]
liquid flow [min] flow [min] liquid flow [min] liquid flow [min]
49 TOP HEAD - - 0.01 - - - -
50 VANE PACK TOP - TTL 240 100 0.04 - - - -
GAS

51 VANE PACK HEIGHT 450 784 0.08 - - - -

52 INLET - VANE PACK 550 300 0.10 - - - -
53 HHLL - INLET 520 400 0.10 - - - -
54 Not used
55 HLL - HHLL 150 100 0.03 1
56 NLL - HLL 230 0.04
LIQUID

100 5
57 LLL - NLL 0 0.00
58 LLLL - LLL 230 100 0.04 1
59 BTL - LLLL 180 100 0.03
60 BOTTOM HEAD - - 0.01
61 LIQUID LEVELS VOLUMES AND WETTED AREA
62 LLLL LLL NLL HLL HHLL
63 LEVEL mm 180 410 410 640 790
64 LIQUID VOLUME m³ 0.05 0.09 0.09 0.13 0.16
65 GAS VOLUME m³ 0.45 0.41 0.41 0.37 0.34
66 WETTED AREA m² 0.53 0.88 0.88 1.23 1.46