Training and Development Process of Beximco Limited - Assignment Point
Training and Development Process of Beximco Limited - Assignment Point
(http://www.assignmentpoint.com/science/pharmacy/training-development-process-
beximco-limited.html)
INTRODUCTION:
Primavera P6 Courses
CS Global Group
csglobal-g.com
In simple terms training and development refers to imparting of specific skills, abilities
and knowledge to an employee. A formal definition of training and development is… it is
any attempt to improve current and future employee performance by increasing an
employee’s ability to perform through learning, usually by changing the employee’s
attitude or increasing his/her skills and knowledge. The need for training and
development is determined by the employee’s performance deficiency, computed as
follows:
Objectives
Training and development activities are planned on the basis of need and demand to
enable employees to meet one or more of the following objectives:
This report is an internship report prepared as a requirement for the conclusion of the
MBA program. As per requirement of MBA program of International Islamic University
Chittagong, Dhaka Campus of department of Business Administration, after completion
of 37 credits a student has to complete an 8 weeks internship program. Mr. Md.
MusharrofHossain, Faculty Member, International Islamic University Chittagong, Dhaka
Campus assigned this internship report to me . This report is originated as the practical
fulfillment of my MBA degree of IIUC and the topic is “The Training and Development
Process of Beximco Ltd.” To prepare the report, I have taken necessary assistance from
HR Department of Beximco Textile and Apparel Division.
The main objective of this report is to find the training and development procedures of
Beximco Limited. To find the main objective other supportive objectives are as follows:
METHODOLOGY
METHODOLOGY OF REPORT:
The study is performed based on the information extracted from different sources
collected by using a specific methodology. This report is analytical in nature. To
prepare the report on training and development policy and procedure of Beximco Ltd.
the information has been collected from primary and secondary sources.
The report will mainly focus on the basis of the steps taken by “BEXIMCO LTD” for its
Human Resource Development. It will also focus on their employee perception of the
organization.
After studying that whole report anyone can learn and get understand about “The
Beximco Ltd.” HR development level.And how they can help further their employee
development.
ORGANIZATIONAL OVERVIEW
Today the BEXIMCO Group (“BEXIMCO” or the “Group”) is the largest private sector
group in Bangladesh. BEXIMCO was founded in the 1970’s by two brothers – Ahmed
SohailFasiurRahman and Ahmed Salman FazlurRahman. Since the early days, the
Group has evolved from being primarily a commodities trading company to a leading,
diversified group with a presence in industry sectors that account for nearly 75% of
Bangladesh’s GDP. BEXIMCO’s corporate mission is “Taking Bangladesh to the world”.
As BEXIMCO has grown over the years, the flagship platform now has operations and
investments across a wide range of industries including textiles, trading, marine food,
real estate development, hospitality, construction, information and communication
technologies, media, ceramics, aviation, pharmaceuticals, financial services and
energy. The Group sells its products and services in the domestic Bangladesh market
as well as international markets. BEXIMCO is the largest employer in the private sector
in Bangladesh and employs over 48,000 people worldwide.
The BEXIMCO name has now become one of the most recognizable brand names in
Bangladesh. It is synonymous with innovation, trust and quality. The Group consists of
four publicly traded and seventeen privately held companies. The publicly traded
companies – Bangladesh Export Import Company Limited, Beximco Pharmaceuticals
Limited, Shinepukur Ceramics Limited and Beximco Synthetics Limited – have a
combined market capitalization of approximately $702.25 million. The Group had total
revenues of $834 million in the year ended December 31, 2010.
BEXIMCO encompasses one of South Asia’s largest vertically integrated textile and
garment companies. The Textile division is a fully integrated manufacturer of cotton
and polyester blended garments for men, women and children, both for domestic and
export markets. BEXIMCO is also the largest exporter of pharmaceuticals in
Bangladesh with a presence in 45 countries. The Pharmaceuticals division
manufactures and sells generic pharmaceutical formulation products, active
pharmaceutical ingredients (API) and intravenous (IV) fluids. The Group is also the
largest ceramics exporter and has an investment in GMG Airlines, the largest private
commercial airline in Bangladesh and in Unique Hotels & Resorts, which owns the
Westin Hotel in Bangladesh.
State-of-the-art manufacturing plants located in the vicinity of Dhaka provide the Group
with a highly cost effective manufacturing base. A majority of its plants are in the
BEXIMCO Industrial Park, a vertically integrated self-contained facility. This facility
provides ready access to captive power generation, water purification, liquid nitrogen,
waste water treatment and other key infrastructure. The Group’s global clients include
some of the world’s best known brands including BT, BASF, Chevron, Calvin Klein, H&M,
JC Penney, Macys, Zara, UNICEF, Royal Doulton and Villeroy&Boch.
BEXIMCO is well positioned to capitalize on strong growth across industries in both the
domestic and global markets. Each Group company is managed by an independent,
professional team with significant depth of experience. Management teams have
established a clear strategic plan that will further strengthen the overall platform.
BEXIMCO intends to leverage its market position and global scale, further diversify
operations into highly profitable sectors, capitalize on the domestic growth opportunity
and selectively pursue international opportunities going forward.
In recognition of its corporate success and creation of shareholder value, the BEXIMCO
Group has and continues to make significant contributions to Bangladesh’s society.
Sponsored organizations include “Proyash”, a specialized institute that works for the
holistic development of children with special educational needs and
“GonoSahajjoSongstha”, an institution that provides education for the underprivileged.
BEXIMCO was also an official sponsor of the Bangladesh National Cricket team for the
ICC Cricket World Cup 2011 and also the official title sponsor of the FIFA friendly match
between Argentina and Nigeria held in September, 2011.
Meet Your Mature Match
Meet, Share Interests and Get Closer
Learn more
datemyage.com
The textile industry in Bangladesh has been an important contributor to the economy
for centuries, and today is one of the country’s most crucial economic sectors.
According to the country’s Ministry of Textiles and Jute, its textile and apparel industry
encompasses textile processes from spinning; weaving; knitting including hosiery and
knit dyeing; dyeing and finishing; yarn dyeing; and sewing thread; up to the final
outputs, including ready-made garments and nonwovens such as technical textiles.
Bextex Ltd. has a state of the art composite knit fabric production mill, which serves
the growing needs of high-quality knit garments exporters in Bangladesh. The project
was set up as a state of the art knit fabric knitting, dyeing and finishing facility. During
the year the Company produced and sold high quality of knit fabrics and bringing forth
all the latest in hard and soft technologies in knitting, dyeing and finishing of knit
fabric.
Bextex Ltd. also has a cotton and polyester blended yarn-spinning mill, with 122,000
spindles is one of the largest spinning mills of the country. The mill was set up to feed
the country’s export oriented industries.
Bextex Ltd. produces specialized finishes of denim cloth for export in finished as well
as cloth only form.
BOARD OF DIRECTOR:
Asst. Manager
M. S. Alam
Jr. Executive
Mission :
BEXTEX Ltd. is a full service vendor with strong vertically integrated production
facilities as well as creative & analytical capabilities which clearly sets us apart from
most other South Asian vesndors.
Vision:
• Gain market leadership in high value added apparel in USA & Europe .
• Use “Innovation” & “Speed” as prime drivers, rather than cotton & cheap labour .
IN BEXIMCO LTD.
Training refers to the methods used to give new or present employees the skills they
need to perform their jobs. Training is a hallmark of good management. Having high
potential employees does not guarantee they will succeed. Instead, they must know
what the organization want them to do and how. If they donot, they will do the jobs their
way and do nothing productive at all. Good training is vital.To achieve any company’
objectives, qualified personnel are needed to be ensured at all level in an organization.
It has been proved over and over again that for a company the most important resource
is human resource. As explained in the ‘Study of Organizational Behavior’ each human
is different and is valuable treasure. These qualities of the human resource are
unveiled through Trainingand Development process. Without having a systematic and
well-organized training and development procedure, a company cannot get the best
performance.
Definition
Training refers to the teaching and learning activities carried on for the primary purpose
of helping members of an organization to acquire and apply the knowledge, skills,
abilities, and attitudes needed by that organization. Training is the act of increasing
knowledge and skill of an employee for doing a particularjob.Employee training tries to
improve skill or add to the existing level of knowledge so that the employee is better
equipped to do the present job or prepare him/her for a higher position with increased
responsibility.
¨ Help the employees in their career development. In other words it paves the path of
individual growth.
Scope:
This Specification provides guideline for training program at Beximco Textiles Division
focusing on the following areas:
Training Process
Each department identifies their minimum and maximum number of trained personnel
needed for various levels of certificate; this number may vary time to time depending
on the production volume and the required headcount of the area. Department
identifies the training gaps based on their current certification status and the required
number of certified personnel needed to effectively run the area.
¨ To ensure training program is implemented in all the units under BTD as and when
required.
¨ To optimize the utilization of training resources which in turn reduces costs and
increases operational efficiency.
Training Requisition
Once a new Worker is recruited a training need is identified by the department and a
Training Requisition Form, is signed by the Department Head is to be filled out and
forwarded to the Training Department within 15 days of his joining date. Requester
specifies the tentative training start date and the trainer to be appointed for the training
though it all depends on the trainer availability. A Trainee cannot be the requester of the
training.
Training Resource
Trainers
Beximco Textiles Division utilizes mainly Peer Trainers as the training resource.
However, in some technical areas like Quality Assurance or Maintenance, executive
trainers are utilized. The Trainers are the identified training experts within the area who
are knowledgeable, skilled, and are trained as a Trainer through a ‘Train the Trainers’
workshop. Basic understanding of human psychology and relevant communication
methods are taught in this workshop. They follow specific methods of training required
to train the trainee considering their learning styles. After successful completion of the
Trainer’s workshop, Peer Trainers are awarded with certificate which in turn authorizes
them to train the trainees.
Training is to be conducted one on one, meaning one Trainer trains only one trainee at
a time. Though if needed, dual training (2 trainees with 1 trainer) might be conducted or
any other exception should be done upon approval of the Department In-Charge and the
Head of the Training Department.
Training Materials
Beximco Textile Division primarily depends on “On the Job Training” to develop skills
for their manpower. To facilitate this training process each area of Training follows a
Training Task Checklist (TTCL). Specifications are also used as supporting document
to train a trainee since it is considered to be the Standard Operating Procedure (SOP)
that must be followed to do the job.
Training materials may vary from area to area depending on their training process.
Each department or area of training may identify their training process and specify on
the TTCL. Additional materials used for training might be as following:
Training Class
Training Coordination
On the basis of the Training Requisition Form forwarded by the department head,
Training Department starts its planning process. The Training Coordinator,
representative of the Training Department looks at the present training schedule for the
area and identifies Trainer availability. Training Coordinator, Section head and the Peer
Trainer agrees on a training schedule that is placed on a Planning Sheet by the Training
Coordinator. This Training Planning Sheet (TPS) is then distributed to the training
affected area for their information. Training Department is responsible for distributing
the TPS for any changes of the training plan for the affected department’s
acknowledgement as well as the acknowledgement of the trainee.
Types of Training and Certification
Beximco Textiles Division has standardized their Training & Certification types or levels
in order to maintain consistency yet being flexible to the specific needs of the
departments or the areas of training.
The following types of Training & Certification process have been identified by the
organization :
Full Certification
The following are the different certification levels maintained by the specified
departments:
Operation:
1. Level 1 Certification
2. Level 2 Certification
3. Level 3 Certification
4. Certified Helper
5. Dye/Chemical Mixer
Maintenance/Utilities/ETP/Others :
1. Level 1 Certification :
2. Level 2 Certification :
3. Level 3 Certification :
QualityControl (Q.C.):
1. Level 1 Certification
2. Level 2 Certification
3. Level 3 Certification
Conditional Certification
1. Chemical Preparation
2. Machine Set up
3. Daily Machine Cleaning
Training Method
The following steps are followed to train an individual at different units under Beximco
Textiles Division.
The trainee is given a tour of his/her primary work area. Trainer shows all the hazards
associated with the area such as fire, thermal, mechanical, and electrical hazards. He/
she is given tips on what to do in case of an emergency. Trainer must review the Health
& Safety manual for BTD (Document No. 10-202) with the trainee. Apart from this, each
trainee must be informed about the dress code and code of conduct of BTD in general.
The trainee is given a brief overview of the factory specifying when it was built, current
production capability, and it’s management structure. Trainer then introduces the
trainee with the key individuals that s/he will be interfacing to conduct the job. A
factory tour is given showing different departments, offices, and production areas.
Note: Once determined, the trainer will review the Beximco Philosophy, Vision of the
Industry, Goal of the factory, and Area goals with the trainee.
1. Let the trainee go through any available classes associated with the job.
2. Review of related manuals and technical resources.
Job Observations
Next the trainer selects tasks from the Training Task Checklist (primarily one task at a
time for effectiveness), and performs the job while the trainee observes. Trainer
demonstrates each steps of the task and explains thoroughly to the trainee. Trainer
may demonstrate the same task more than once depending on the trainee’s learning
ability.
Skills Practice
Once trainer feels that the trainee has grasped the knowledge and is able to perform
the job, then trainer allows the trainee to perform the same task under his/her
(trainer’s) guidance. Trainer must take full responsibility for the task that the trainee is
performing. The number of times trainee practices a skill under observation depends
on the trainer’s discretion.
Proficiency
Developing proficiency to perform a task or a job depends on the nature of the job/task
and on the ability of the person’s adeptness. Once the trainee feels comfortable
performing a task and also when the trainer has the confidence on the trainee’s ability
to perform the task without any mistake, trainee signs on the Training Progress Report
(TPR). This does not mean that the trainee is certified to perform the task
independently without the guidance of the trainer.
Each area or department may wish to define proficiency period on their TTCL for each
task but the ultimate decision lies on the trainer’s judgment based on the trainee’s
confidence and comfort level for performing the task(s).
Whenever any change is made or some new tasks are included in the TTCL based on
the new process or a part of the Standard Operating Procedure (SOP) is changed then
Ad hoc training is arranged upon the request of change initiator. The change initiator
specifies it on the Change Notification Form (F10-101-02). Objective of this training is
to facilitate the changes in different processes immediately and effectively by
educating the employees involved in that particular area.
Whenever a need is identified for ad hoc training the Training Requisition Form is filled
out as specified in section 2.2 of this manual. The Training department takes the
initiative to arrange an ad hoc training session by consulting with Trainers and relevant
Section Head.
To continuously monitor the progress of trainee a training progress report viz. Ad hoc
Training Progress Report (ATPR), (Form No. F20-501-04) is maintained by the Trainers
after completion of the tasks introduced in that particular area where the change has
been made.
Peer Trainer
Assigned peer trainer is the primary person responsible for monitoring the progress of
the training. The trainer is to submit a progress report to the Training Coordinator and
to the section head every week or as it is agreed by the Training Department and the
Section head prior to the training. Any issues regarding the trainee or the training must
be communicated to the Training Coordinator promptly for quick resolution. Besides
this to ensure task by task monitoring, trainee uses a Training Progress Report (TPR)
Form, which includes all the levels and tasks. Peer Trainer’s responsibility is to collect
signature of trainees for each of the task after successful transfer of knowledge related
to a particular task. Peer Trainer bears the ultimate responsibility for the training
performance.
Training Program Coordinator (TPC) maintains good communication with the Peer
Trainer and follows up with the training progress. Training coordinator ensures all
barriers are removed in order to create an environment for effective training. TPC is
responsible for upward communication ensuring stakeholders are well informed of the
factory Training and Certification status.
Training Evaluation & Development Coordinators (TEDC) are responsible for monitoring
the training progress, evaluation, accepting feedback for any training or training related
improvements, development of training resources, etc.
Evaluation Process
When training is complete, Peer Trainer informs Training Evaluation & Development
Coordinator (TEDC). For wrapping up the training, the TEDC sets up a meeting with the
Trainee and the Trainer with prior approval of the Section Head. During this meeting the
trainee is evaluated based on the criteria stated on the Training Evaluation Form, (Form
No. F20-501-03). After evaluation, the team recommends either to continue training or
authorizes to certify the trainee. If authorized for certification, TPC processes the paper
work as per section 7.2 of this specification.
Certification
Issuance of Certificate
Once the Evaluation Team (consist of TEDC and Trainer) recommends to issue a
Certificate or a Conditional Certificate, TEDC documents training information on
Training Department’s file. Training history including Peer Trainer’s name, training
period, and tasks on the TPR that had been signed are entered into the Training
Database.
After completion of all documentation, Training Program Coordinator (TPC) issues a
Certificate or documents to support Conditional Certificate.
Certification:
Certificate Validity
An individual is to be de-certified if s/he does not perform the job longer than the time
period specified below. Area In-Charge must inform the Training Coordinator to de-
certify the person for such cases. Once the person returns to the job, s/he is retrained
and re-certified before the individual independently performs the job. During the re-
training, Peer Trainer must observe the trainee performing each tasks and also update
the individual on any new changes or revision of Standard Operating Procedures (SOP).
De-Certification Criteria
Area Decertified if
All Operations Certification Performance is poor. Area In-charge discretion or Job break > 3 months
All Maintenance Certification Performance is poor. Area In-charge discretion or Job break > 6 months
Training Improvement:
Scope
Since Training Department of Beximco Textiles Division introduced a new and unique
training system in different units under BTD, it will be going through a continuous
improvement path. As the Department matures and employee’s concept of training and
its importance flourishes, new and advanced ideas will lead this effort to be the most
needed business partner at our job. For this continuous improvement, input and helping
effort is needed from each department.
Systems Improvement
Because this concept of Training and Certification is new to this industry, intention is to
develop a fairly simple system to support this effort. As we go along, Training System
will be improved based on the feedback from the system users and other experts.
Training Program Coordinator (TPC) is to collect the feedback and take necessary
actions for improving the current conditions.
Materials Development
Beximco Textiles Division has adopted the simplest process for training the manpower.
The present process will be enhanced as we develop new training materials and
curriculum based on area- specific needs. Each area of training is to give cognitive
thinking and work with the Training Department for the training materials improvement.
Training Evaluation & Development Coordinators (TEDC) will ensure continuous
improvement of the resource materials.
TrainingDocument Management:
Documentation
Training Department is responsible to maintain information regarding Training and
Certification for all employees.
As noted in Section 7.2 of this specification, one copy of certificate is issued to the
Area In-Charge for their record. A photocopy of the Certificate is kept in the Training
Department’s Area-specific file. If the Area/Department looses their issued certificate,
then the Area In-Charge requests for issuance of another certificate using the Duplicate
Certificate Request Form (F20-501-05) and Training Department honors their request
by issuing another certificate or providing a photocopy of the old certificate and
documents they issued.
All necessary forms and documents such as Requisition Form, TPR, Training Task
Checklists or Training Materials required is to be available at the Training Department
to facilitate Training and Certification.
Training Database
To maintain details record of training program and generate reports for top
management as and when required different need specific Training database(s) are
developed using Ms Access and MS Excel. These databases help Training Department
to monitor continuously different training programs which increases operational
efficiency. The TEDC and TPC are responsible to update on time data, modify or design
different reports or develop new database as and when required.
Following forms and documents are used to ensure smooth performance of Training
System at different units under BTD :
Document Flow
The Training Requisition Form (TRF), (Form No. F20-501-01), signed by department
head is submitted by concerned department to Training Department. This form is
submitted prior to the training start date.
During Training, Training Progress Report (TPR) (Form No. F20-501-02) is used by the
Trainers to get the acknowledgement of specific job knowledge transfer. This form is
supplied to the Trainees along with the training materials and they are instructed to put
their signature upon completion of each task satisfactorily. At the end of the Training
program, this form is submitted to the TEDC for evaluation scheduling. Based on this
report, TEDC updates the Training database.
When the training session is over, the evaluation team evaluates the trainee by using
the Training Evaluation Form (TEF), (Form No. F20-501-03) and sends it to the Training
department. This form also acts as a Certificate Requisition Form.
Based on the Training Evaluation Form (TEF), Training Department issues certificates
to the Area-In- Charge. A photocopy of the same is kept in the Training department.
Ad hoc Training Progress Report (ATPR), (Form No. F20-501-04) is maintained by the
Trainers after successful completion of transferring the knowledge of newly
introduced/changed task(s) in TTCL or area specific SOP.
In case of any loss or damage to the original certificate the concerned Area-In-Charge
can request for a duplicate copy by filling up and submitting the Duplicate Certificate
Request Form (DCRF), (Form No. F20-501-05) to the Training department. Training
department issues a duplicate copy or a photocopy of the original certificate based on
this request form.
Correction (if required) on any issued certificate is done by Training department using
Error Rectification Form (ERF), (Form No. F20-501-06).
Apart from the above mentioned forms, different documents like, Training Task
Checklist (TTCL), Training Materials (TR), Standard Operating Procedure (SOP),
Manuals, Handouts, Technical documents (e.g. Drawings, Operating Manuals, etc.) are
used to ensure proper job knowledge transfer. All these documents are available with
the Training department and can be obtained with prior requisition.
FINDINGS AND INTERPRETATION
1. Do you have any policy that states the organization’s philosophy on employee
training and development?
INTERPRETATION: They are all aware of their HR planning about training and
development procedure which has been talked in the ‘Training Manual’ that is
mentioned here on chapter 4.
1. Does your HR Department conduct JOB ANALYSIS to identify the job’s needed
skills?
INTERPRETATION: From the given information it suggests that most of the employees
(from officers to top) are well aware that they have job analysis process. This is also
good for the organization. Here we found two major things e.g. i) they have job analysis
process and ii) most of the employees are informed about the matter. If each employee
knows that what the minimum competency is required for his post and what are the
duties and responsibilities for his then he/she will be able to achieve the organizational
goal.
1. Do you have any process for assessing the organization’s (immediate and future)
training needs and individual development needs?
INTERPRETATION: From the above data it has been found that consultants, trainers
and the HR department along with employees participate in the assessment of training
needs. As they have job related all information from Job Analysis according to which
they conduct recruitment and induction training. But yet every employees need to be
updated for various reason. Employees also need attitude development training to be
motivated toward the goal achievement. Beximco Ltd. HR department conducts this
assessment once in a year. The consultants along with the HR department survey the
current job statement, identify lacking and show the management where training is
needed.
1. Individual interviews 0
2. Performance appraisal & opinion surveys 10
3. Both 2
INTERPRETATION: Data reveals that most of time they prefer individual interviews and
opinion surveys beside performance appraisal as methods to identify the training
needs in the organization. It is not only a good method of identifying the training needs
and a scope to get correct information but it also gives opportunity of employee
participation.
1. Classroom lectures 0
2. Audio visual based training & on job training 1
3. All of above 11
1. Besides developing job required skills, does the training includes personal attitude
development training like:
1. Grievance handling 9
2. Conflict avoiding 0
3. Adjusting organizational culture 0
4. All o above 2
5. Both a & c 1
INERPRETATION: From the above data it is can be seen that the company takes both
internal and external trainers. They bring consultants and trainers from training
institute. It will help them to be updated with outside environment and get new ideas
and styles on training procedure.
INTERPRETATION: From the above data it is assumed that the most important
parameter for selection of trainers is to be highly experienced on relevant matter and a
solid hand on expertise. Another two points have also been mentioned, those are high
educational qualification and good communication capability. Most of the employees
are agreed on expert knowledge and practical experience in the relevant field. Thus the
parameters are:
Educational Qualification
Practical Experience
Expert Knowledge
Communication Capability
Trainer:
INTERPRETATION:The trainer is the key person who will be mostly liable for the
outcome of the training. Beximco ltd. gives emphasize on hiring the best trainers on the
relevant field.A skilled and experienced trainer gives importance on skill development
through training. How effective the training is for the organization it depends on the
trainer’s experience in related field and it is evaluated through the effectiveness of the
employees after the training program.
Quality:
1. Does your company have any system of observing or monitoring whether the
trainees are implementing the given knowledge of the training on their job or not?
1. Do you think training helps to increase the motivation level of employees and
enable them to be more productive?
INTERPRETATION: Training is futile if the trainee lacks the ability or motivation to get
benefited from it. In terms of ability, the trainee needs the required educational level,
intelligence and knowledge base. Effective employee selection is obviously useful
here.From survey data I found their opinion on this. They said, of course training is very
important to increase one’s motivation level and enable to be more productive because
training develops knowledge, skills, thus makes people smarter and confident. Training
helps employees to perform better and add value to them, make them able to work
more efficiently. In this way motivation level rises and productivity increases. It serves
as a tool for success.
meaningful units 12
1. Or any other………………. 0
INTERPRETATION: The HR department can take several steps to increase the trainee’s
motivation to learn. Providing opportunities for active practice and letting the trainee
make errors and explore alternate solutions improves motivation and learning.
Feedback including periodic performance assessments and more frequent virtual
critiques is also important. The department should also make the matter meaningful.
For example, provide an overview of the material and ensure that the program uses
familiar examples and concepts to illustrate key points. From the gathered data I have
got that Beximco Ltd.’s HR department organize the information to present it logically
and in meaningful units. It’s a good step, it helps trainee to easily understand the
material and adopt soon. But there are more terms which will be of more help for them.
ITAINTERPRTION: The Company should also try to make the skill transfer easy to
motivate the learners. According to the data revealed the company provides adequate
realistic practices for the trainees. It is a useful tool to motivate learners because it will
increase their decision making skill, it will be a practice of working under pressure and
encourage them to be really confident.
1. Do you have any other comments about the Training and Development process?
INTERPRETATION:
In this question I found lot of opinions from employees some of which are stated
below:
RECOMMENDATION& CONCLUSION
RECOMMENDATION
To improve the present “Training and Development Process” of Beximco Ltd. the
following recommendations have been suggested:
CONCLUSION
Now a days business does not mean just selling and purchasing the products or
services. This is very important to conduct the business in an organized and effective
manner. A well running business needs strong, efficient, skilled and talented and a loyal
workforce, who arealso to be satisfied with their job. They are to do their job in the
ways the organization wants to achieve its goal. This is why, the concept of Training
and Development originated. In present era all big and small business organizations
give emphasize on having a trained and developed workforce so that they can compete
strongly in both inside and outside the national boundary.As we all know in the
business world things move on the will of impression. Beximco Group is the largest
private sector group in Bangladesh and it is the duty of this company to continue the
business holding that image. Behind this successful journey of Beximco Ltd. their
training and development system has large contribution.Beximco Limited definitely has
a good training and development system and to maintain this scenario in a more
efficient and prospective manner the company can surely accept this project in a
cordial way.
References:
Personal management and Industrial Relations by N.G. Nair and Latha Nair.
Training manual of Beximco Ltd. (Apparel Division).
Website: www.beximco.org
(http://www.assignmentpoint.com/wp-content/uploads/2013/08/Beximco-Limited.jpg)
Twitter
Facebook (http://twitter.com/share?
(http://www.facebook.com/sharer.php? text=@AssignmentPoint
u=http://www.assignmentpoint.com/science/pharmacy/training-
Training And Development
development-process- Process of Beximco Google+ WhatsApp
beximco- Limited at (https://plus.google.com/share? (whatsapp://send?
limited.html&t=Training &url=http://www.assignmentpoint.com/science/pharmacy/training-
url=http://www.assignmentpoint.com/science/pharmacy/training-
text=http://www.assignmentpoint.com/
And Development Process development-process- development-process- development-process-
of Beximco Limited) beximco-limited.html) beximco-limited.html) beximco-limited.html)
Related Paper
More Paper
Copyright © AssignmentPoint.com