New features of ECU list sw V4.

7 Page 1 of 3

Available files and documentation

"ECU list.igc/iwe/idc" can be imported into GenConfig / LiteEdit / DriveConfig as a standard firmware
package and contains the following files:

ESL file Dedicated controller

ECU list - Gensets.esl IGS-NT
ECU list - Allspeed.esl ID-DCU, ID-Lite
ECU list - InteliLite.esl IL-NT, IC-NT
ECU list – Mobile.esl ID-Mobile

ESF files Description

Caterpillar engines equipped with ADEM engine control unit and EMCP
CAT_EMCP3.esf
3.x panel.
CATJ1939.esf Caterpillar engines with J1939 CAN data link.
Cummins558.esf Cummins gas engines with CM558 unit. Under tests!
CumminsCM570.esf Cummins QSM11 engines with CM570 unit.
Cummins QSB5/7, QSL9 and QSK50/60 Tier II engines with CM850 unit.
CumminsCM850.esf
Under tests!
CumminsCM850PCC13xx.esf Cummins gen-sets mounted with CM850 and PCC13xx. Under tests!
CumminsMODBUS.esf Cummins MODBUS interface engines.
DaimlerChrysler 500, 900, 450 series engines equipped with PLD-MR
DaimlerChryslerADM2.esf engine control unit and ADM2 vehicle control adaptation module. Under
tests!
DDC_DDECIV.esf Detroit Diesel engines equipped with DDEC IV unit.
DeutzEMR2.esf Deutz EMR2 similar to Volvo EDC4.
DeutzEMR3.esf Deutz engines with EMR3 engine control unit.
GM engines with MEFI4B or MEFI5B engine control unit. Works with IGS-
GM_MEFI.esf
NT-2.3.1 and higher and ID-DCU-Industrial-2.6 and higher.
GM_SECM.esf GM engines with Woodward SECM 48 interface.
Isuzu.esf Isuzu engines equipped with ECM. Engines 4H-xxx
Iveco.esf Iveco NEF & Cursor engines with J1939 CAN data link.
IvecoVector.esf Iveco Vector engines with ADEM engine control unit. Under tests!
JCB Dieselmax engines equipped with Delphi DCM 3.3 common rail
JCB_DCM.esf
engine control unit. Under tests!
JenbacherDiane.esf Jenbacher engines with Diane control system.
JohnDeere.esf John Deere engines with J1939 support.
MAN_MFR.esf MAN engines with MFR interface. Under tests!
MTU engines series 2000/40000 with ADEC control unit, SAM module
MTU_ADECJ1939.esf
and CCB2 card.
MTU P - engines series 2000/4000 with ADEC control unit, EMU module
MTU_ADEC1939Peng.esf
supported.
PerkinsECM.esf Perkins engine (series 2300 and 2800) with ECM unit.
ScaniaS6Aux.esf Scania S6 singlespeed engines.
Scania S6 singlespeed engines with ECU software version 1794335 or
ScaniaS6AuxII.esf
higher.
ScaniaS6Prop.esf Scania S6 allspeed engines.
Scania S6 allspeed engines with ECU software version 1794335 or
ScaniaS6PropII.esf
higher.
SISU_EEM3Gen.esf SISU engines with EEM3 unit. For gen-set applications.
SISU_EEM3Prop.esf SISU engines with EEM3 unit. For propulsion applications.

ECU list V4.7 – New features / ©ComAp – February 2009 / ECU list -4.7-New Features.pdf

A p s .r.
om
C

o.

ComAp, spol. s r. o. Tel.: +420 246 012 111

Kundratka 2359/17 ISO 9001 Certified Fax: +420 266 316 647
180 00 Prague 8 E-mail: [email protected]
al i t
t
Qu

en

Czech Republic y Manage m Internet: http://www.comap.cz

 New features of ECU list sw V4.7 Page 2 of 3

Definition for engines with standard electronic control unit. These

StandardJ1939engine.esf
definition contains only values from CAN SAE J1939 specification.
VM_Industrial.esf VM engines for industrial applications. Under tests!
VM_Marine.esf VM engines for marine applications. Under tests!
VolvoPenta AUX EMSI,II family for singlespeed applications with
VolvoMarineAux.esf
gensets.
VolvoMarineProp.esf VolvoPenta PROP EMSI,II family for allspeed applications.
WaukeshaESM.esf
Waukesha Engenius Engine System Manager with Modbus interface.
(for IGS-NT only!)

The PDF files can be downloaded from www.comap.cz (Support – Downloads – Manual):

Documentation
PDF files Description
Comap Electronic Engines Complete list of values and diagnostic codes transmitted to/from ECU
Support 01-2009.pdf together with recommended configuration and wiring
(available in week 8/2009)

1. Main changes in ECU list - 4.7

New features

· Caterpillar ADEM&EMCP3
Now available values read from ADEM as well as from EMCP panel:

Coolant
temperature read
from ADEM

Coolant
temperature read
from EMCP

In case that the value is not valid (controller shows ####) try to use value from another source.

· ECU List - Mobile

Added new Engine Specific List for ID-Mobile. It contains all engine types like ECU list –
Allspeed plus options for Modbus communication with Cummins GCS and Waukesha ESM.

· Scania ESFs
Added diagnostic message for fault code 0x6605 – “Starter Motor”

ECU list V4.7 – New features / ©ComAp – February 2009 / ECU list -4.7-New Features.pdf

A p s .r.
om
C

o.

ComAp, spol. s r. o. Tel.: +420 246 012 111

Kundratka 2359/17 ISO 9001 Certified Fax: +420 266 316 647
180 00 Prague 8 E-mail: [email protected]
al i t
t
Qu

en

Czech Republic y Manage m Internet: http://www.comap.cz

 New features of ECU list sw V4.7 Page 3 of 3

· Cummins CM850
Modified destination address for Engine Governing message.

· Cummins CM850&PCC13xx
Removed from ECU list. Use “Cummins CM850” option instead.

· Volvo ESFs
Modified source address for TSC1 message.

ECU list V4.7 – New features / ©ComAp – February 2009 / ECU list -4.7-New Features.pdf

A p s .r.
om
C

o.

ComAp, spol. s r. o. Tel.: +420 246 012 111

Kundratka 2359/17 ISO 9001 Certified Fax: +420 266 316 647
180 00 Prague 8 E-mail: [email protected]
al i t
t
Qu

en

Czech Republic y Manage m Internet: http://www.comap.cz