Scribd
Upload
95 views

Ss Model 2 2016 - Scheme

1. The document is a model question paper for the course Signals and Systems. It contains two parts - Part A with short answer questions and Part B with longer answer questions. 2. Part A contains 1 mark and 2 mark multiple choice and short answer questions testing core concepts in signals and systems like energy/power signals, time-invariant/variant systems, stability, sampling, Fourier transforms, etc. 3. Part B contains longer answer numerical problems involving concepts like convolution, filtering, system responses, Fourier transforms, FFT algorithms and their implementations to analyze and design signals and systems.

Uploaded by

Kaustubha Shah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
95 views

Ss Model 2 2016 - Scheme

1. The document is a model question paper for the course Signals and Systems. It contains two parts - Part A with short answer questions and Part B with longer answer questions. 2. Part A contains 1 mark and 2 mark multiple choice and short answer questions testing core concepts in signals and systems like energy/power signals, time-invariant/variant systems, stability, sampling, Fourier transforms, etc. 3. Part B contains longer answer numerical problems involving concepts like convolution, filtering, system responses, Fourier transforms, FFT algorithms and their implementations to analyze and design signals and systems.

Uploaded by

Kaustubha Shah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Course Code: 16EC45

USN

R. V. COLLEGE OF ENGINEERING
Autonomous Institution affiliated to VTU
IV Semester B. E. ExaminationsApril/May-18
Department of Electronics and Communication Engg.
Model Question Paper - 2
Course Title: Signals and Systems

Time: 03 Hours Maximum Marks: 100


Instructions to candidates:
1. Answer all questions from Part A. Part A questions should be answered in first three pages
of the answer book only.
2. Answer FIVE full questions from Part B. In Part B question number 2, 7 and 8 are
compulsory. Answer any one full question from 3 and 4 & one full question from 5 and 6

PART-A
1 1.1 If x[n] = exp[-5n] u[n], Whether the signal is energy or power 01
1.2 Which property does y(t) = x(1-t) exhibit? 01
1.3 Comment on the stability of the following system, y[n] = n*x[n-1]. 01
1.4 The sifting property of the discrete time impulse is _____ 01
1.5 The RMS value of x(t)=8cos4t.cos6t is ______. 01
1.6 For the signal, x(t) = log(cos (a*pi*t + d)) for a = 50 Hz, what is the time period of
the signal, if periodic? 01
1.7 The energy and power of is _____ and ______. 02
1.8 The value of h(n-1)*δ(n-1) is ____ 01
1.9 If the Energy of a signal x(t) is E, then Energy of the signal x(2t ) is______
01
1.10 What is the period of the Fourier transform X(ω) of the signal x(n)? 01
1.11 Consider the analog signal,
xa(t) = 3 cos 50Πt +10sin 300Πt-cos 100Πt. What is the Nyquist rate for this signal? 02
1.12 Consider the analog signal xa(t) =3cos100Πt. The minimum sampling rate required to
avoid aliasing is ____.
01
1.13 State Parseval’s theorem. 01
1.14 Sketch x((n-3)8 for the sequence x(n)=[2,1,-2,1,2,1,-2,0]. 01
1.15 The 5-point DFT of x(n) is X[k]=[3,4j,2,2,-4j]. What is the energy of x(n)? 01
1.16 In the 512-point DFT computation by radix -2 FFT , there are stages of computations
with _____ butterfly computations per stage. 02
1.17 Compute the value 01
PART-B
2 a Sketch the waveform for the signal
x(t) = u(t+3)+r(t+2)-r(t+1)-r(t-1)+r(t-2)-u(t-3) 05
b Determine the following signals are energy signal or power signal
1)x(t)=cos2w0t 2) x(t)=rect( ).cosw0t 06
c Check whether the following systems are
i)memoryless ii)Time-Invariant iii)Linear iv)Causal v)stable
1)y(t)=x(t).cosw0t 2) y(t)=ex(t)
05
3 a b)Given x(t)=e-at. u(t) and h(t)=e-bt. u(t). Find x(t)*h(-t). 06
b a)Determine the complete response of the system described by the difference equation,
y(n)-(1/4)y(n-1)-(1/8)y(n-2) = x(n)+x(n-1) with y(-1)=0,y(-2)=1
06
c A system has impulse response h(n)=(1/3) nu(n). Find the step response and verify
causality and stability of the system. 04
OR

4 a Let h1(t),h2(t),h3(t),and h4(t) be the impulse responses of four different LTI systems.
Construct the system with impulse response h(t), using h1(t),h2(t),h3(t),and h4(t) as
sub systems, where h(t)=h1(t)*{h2(t)+h3(t)*h4(t)}. 04
b Draw the direct form I and II realization for the following system.
y(n) + 3y(n-1)+2y(n-2) = x(n) + 6 x(n-2)
08
c State and prove associative property of convolution integral 04
5 a State and prove the following properties of CTFT
i) Convolution
ii) Scaling 06
b Let the input to a discrete-time LTI system be x[n]=3+cos(πn+π/3).Determine the
output of this system for the impulse response h[n]=(-1)nsin(πn/4)/πn 06
c Determine the DTFT of unit sequence x[n]=d[n]+d[n-1]+d[n-2] where d[n] being the
delta function. 04
OR

6 a Find the DTFT of x(n)=(0.5) |n|. Plot the magnitude response. 08


b State and prove:
i) Time shifting property
ii) Frequency differentiation property of DTFT 08

7 Given two sequences x[n] ={1,2,3,4} and h[n]={2,1,2,1}:

a) Find 4-point DFT of the sequence x[n] and h[n]. 06

b) Using the DFT and IDFT, find the circular convolution of x[n] and h[n]. 05

c) Using the DFT and IDFT, find the circular correlation of x[n] and h[n].
05
8 a Compute the 8-point DFT of sequence x(n)=[1,-1,-1,-1,1,1,1,-1] using:
i)DIT-FFT algorithm.
ii)DIF-FFT algorithm
Indicate the intermediate values in the signal flow graph. 12
b The 4-point DFT of a sequence x(n) is X[k]=[1,1-j,2,1+j]. Using FFT algorithm, find
the time domain sequence x(n). 04

You might also like