Scribd
Upload
430 views1 page

Auxiliary Relay Test Report: Sheet 1 of 1

This document is an auxiliary relay test report for a cogeneration interconnection project. It contains a field installation checklist to verify the relay wiring and ensure availability of documentation. Electrical tests are also listed to check that the relay trips correct contacts and LEDs according to settings during pickup, timing, and voltage tests. Remarks and sign-offs are included at the end.

Uploaded by

TariqMalik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
430 views1 page

Auxiliary Relay Test Report: Sheet 1 of 1

This document is an auxiliary relay test report for a cogeneration interconnection project. It contains a field installation checklist to verify the relay wiring and ensure availability of documentation. Electrical tests are also listed to check that the relay trips correct contacts and LEDs according to settings during pickup, timing, and voltage tests. Remarks and sign-offs are included at the end.

Uploaded by

TariqMalik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Form Sheet 1 of 1

AUXILIARY RELAY TEST REPORT


CUSTOMER NAME: PROJECT NAME Cogen- Interconnection
JOB NO. 10-01256 USER REF.
UNIT NO. PLANT LOCATION
MANUFACTURE SUBSTATION
MODEL NO. EQUIPMENT TAG NO.
EQUIPMENT TYPE SERIAL NO.
COMMISSIONING DATE RATING

FIELD INSTALLATION CHECK LIST

VISUAL AND MECHANICAL INSPECTION

Yes No
1. Relays shall be inspected for physical damage and compliance with specifications.
2. Insure up to date relay and control AC and DC schematics, both vendor and Saudi Aramco,
are available.
3. Insure vendor operating /maintenance instruction manuals and PC software are available
4. Verify relay wiring is installed, connected, as per the drawings.

ELECTRICAL TESTS

Yes No
1. Follow all commissioning procedures as per the relay instruction manual.
2. Perform pickup test on the functions activated by the relay settings and make sure that the
relay trips the correct output contacts and activate the corresponding indicating LED as
per the relay settings.
3. Perform timing tests on the functions activated by the relay settings and make sure that
the relay trips the correct output contacts and activate the corresponding indicating LED
as per the relay settings.

PICK UP, DROP-OUT & RATED VOTAGE OPERATED TIMING TEST

Aux. Device Pick Up Voltage Drop off Voltage (De- Contact operates time
(Energized) energized) Rated Volt

Remarks: _____________________________________________________

Witness POD Inspection SAPMT Contractor/Vendor


Signature & Date

You might also like