Scribd
Upload
79 views1 page

Mudel Antenna

This document provides specifications for the Mu-Del Medium Gain Dual Polarized Antenna System (MANT-2224-01120-2C). The system integrates an antenna that operates between 2200-2400 MHz with typical gain of 16 dBi with an electronic package that has a maximum noise figure of 1.7 dB. The electronic package amplifies and filters the RF signal before sending it to a receiver via coaxial cable. The system housing is weatherproof, sealed and can operate between -20 to 50 degrees Celsius. Options include different gain pre-amplifiers, lower gain antennas, and temperature ranges.

Uploaded by

Pankaj Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views1 page

Mudel Antenna

This document provides specifications for the Mu-Del Medium Gain Dual Polarized Antenna System (MANT-2224-01120-2C). The system integrates an antenna that operates between 2200-2400 MHz with typical gain of 16 dBi with an electronic package that has a maximum noise figure of 1.7 dB. The electronic package amplifies and filters the RF signal before sending it to a receiver via coaxial cable. The system housing is weatherproof, sealed and can operate between -20 to 50 degrees Celsius. Options include different gain pre-amplifiers, lower gain antennas, and temperature ranges.

Uploaded by

Pankaj Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MU-DEL ELECTRONICS

Mu-Del Medium Gain Dual Polarized Antenna System


MANT-2224-01120-2C
This assembly is a totally integrated system where the antenna is hard mounted to the
electronic package. The RF Electronics Assembly has a maximum Noise Figure of 1.7 dB
and is designed to send the RF signal over a coaxial cable to either a Multicoupler or a
Receiver.
Antenna
 Frequency Range 2200 to 2400 MHz
 Gain @ 2300 MHz 16 dBi typical
 3 dB Beam Width @ -2300 MHz 25° typical
 Polarization RHCP and LHCP
 Axial Ratio 2 dB typical
 VSWR (Input / Output) 1.5:1 maximum
Filter
 0.5 dB Pass Band 2200 to 2400 MHz
 Pass Band Insertion Loss 0.5 dB maximum, 0.4 dB typical
 Number of Poles 4 typical
Amplifier
 Pass Band 2200 to 2400 MHz
 Gain 45 dB +/- 2 dB
 Noise Figure 0.9 dB maximum, 0.6 dB typical
 Gain Flatness 0.75 dB maximum, 0.5 dB typical
Housing
 Power Requirements 90-260 VAC, 47-440 Hz
 Power Connector 3 pin Locking Connector
 Power Indicator LED showing power to system
 Connector Type N-f or user defined
 Mounting mounting bracket
 Chassis weatherproof and sealed
 Operating Temperature -20 to +50° C
Following are some of the more popular options:
Different Gain Pre-Amplifiers Lower Gain Antenna Different Temperature Range
Please consult factory for Ordering Information and to discuss options to modify any
of the above specifications.

8576 Wellington Road  Manassas  Virginia 20109  Phone (703) 368-8900


Fax (703) 368-8912  Web Site: www.mu-del.com  E-mail: [email protected]

You might also like