PGM RDM RPT – 1 MONO STEREO

ADV.SURR. SFC RDS TUNED

LINE 96k Hz
REC

SUB Wf

PRO LOGIC DIGI TAL

NR B. CUT REC ASES
ECHO KEY KARAOKE L R WAKE– UP REC

ORDER NO.
RRV2793
XV-EV61

STEREO DVD TUNER DECK RECEIVER

XV-EV61
XV-EV31
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Regionalrestriction The voltage can be converted
Model Type Power Requirement
codes (Region No.) by the following method.

XV-EV61 DLXJ/NC 110-127V/220-230V/240V 3 With the voltage selector

XV-EV31 DLXJ/NC 110-127V/220-230V/240V 3 With the voltage selector

This product is component of system.

Component System System Service manual

MINI SYSTEM X-EV61D X-EV31D

Stereo DVD Tuner Deck Receiver XV-EV61 XV-EV31 RRV2793(This manual)

Speaker System S-EV61V S-EV31V RRV2776(EV61), RRV2800(EV31)

For details, refer to "Important symbols for good services" .

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2003
T-ZZR JULY 2003 printed in Japan
Downloaded from www.Manualslib.com manuals search engine
 1 2 3 4

SAFETY INFORMATION
A

This service manual is intended for qualified service technicians ; it is not meant for the casual do-
it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and
may void the warranty. If you are not qualified to perform the repair of this product properly and
safely, you should not risk trying to do so and refer the repair to a qualified service technician.

WARNING !
B
THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1
BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR
CLASS 1.
A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS.

LASER DIODE CHARACTERISTICS

FOR DVD : MAXIMUM OUTPUT POWER : 5 mW
WAVELENGTH : 650 nm
FOR CD : MAXIMUM OUTPUT POWER : 7 mW
WAVELENGTH : 780 nm

LABEL CHECK

Additional Laser Caution

TIM
ER

STA
ND
BY
/ON

SO

1. Laser Interlock Mechanism

UN
D
MO
DE
AD
SUVAN
RR CE
OU D
ND PGM
ADV RDM
SU .SU
RR LINE RR.RPT –
OU REC SFC 1

• Loading switch (S101 on the LOAB Assy) is used for interlock

ND

MON
O
STE
RDS REO
SUB TUN
96k ED
Hz
Wf
TIM
ER
/CL

mechanism of the laser.

OC
K
AD
J
SY
STE
M
DIS
PRO PLA
ECH NR LOG Y
O B.C IC
KEY UT ST.
KARREC ME
AOK DIG MO

When this switch turned ON in SW2 (XCLOSE) side (OPEN signal is

E ITAL RY
LR
WAK
E–
DV UPASES
D/C EN
D REC TER

TAP
E

TU
NE

0V and XCLOSE signal is 3.5V), a laser becomes the status which

VO
R LU
ME
LIN
E

KA
RA

DO
OK
E
(Printed on the Rear Panel B)
can completely oscillation.
(DELBY
MO NR OP
) EN
/CL
4 OS
E
AS TU 1 3/
ES NIN 8
G
–

Furthermore, the laser completely oscillates in the disc judgment and

TU ¢
NIN
7 G
+
STE
RE
O
DE DV
CK D CA
RE
EV CE SSETT
61 IVE RE
DV R E VE

disc playback.
D RS
MO E
DE

RE
C/S
TO
P

PU
SH
OP
EN
When player is power ON state and laser diode is not completely
E FU
LL
STE LO
RE GIC
oscillating, 780nm laser diode is always oscillating by half power.
O AU

• Laser diode is driving with Q101 (650nm LD) and Q102 (780nm LD)
CA TO
SS RE
ETT VE
E DERS
CKE
MIC
VO
L

MIN

on the DVDM Assy.

MAX

MAI
N

MIC

SUB

Therefore, when short-circuit between the emitter and collector of

PH
ON
ES

XV-EV61/DLXJ/NC these transistors or the base voltage is supplied for transistors turn
on, the laser oscillates. (failure mode)
• In the test mode ∗ , there is the mode that the laser oscillates except
for the disc judgment and playback. LD ON mode in the test mode
oscillates with the laser forcibly.
The interlock mechanism mentioned above becomes invalid in this
mode.

2. When the cover is open, close viewing through the objective lens with
the naked eye will cause exposure to the laser beam.

F ∗ : See page 107

2 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

[ Important symbols for good services ]

In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. A
When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.

2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning
B
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.

4. Shipping mode and shipping screws

To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.

5. Lubricants, glues, and replacement parts

Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used. C

Discs compatible with this

player
Any disc that displays one of the following
logos should play in this player. Other
formats, including DVD-Audio, DVD-RAM,
DVD-ROM, CD-ROM (except those that D
contain MP3 and WMA files), SACD will
not play.

DVD-Video DVD-R DVD-RW

Audio-CD Video-CD CD-R * CD-RW *

E
Super Video CD (Super VCD)

Fuji Color-CD

XV-EV61 3
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
A 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING ................................................................................................................................................... 6
2.2 EXTERIOR SECTION................................................................................................................................ 8
2.3 AMP SECTION ........................................................................................................................................ 10
2.4 FRONT PANEL SECTION ....................................................................................................................... 12
2.5 LOADING MECHANISM ASSY ............................................................................................................... 14
2.6 TRAVERSE MECHANISM ASSY............................................................................................................. 16
2.7 DECK MECHANISM ASSY ..................................................................................................................... 18
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 20
3.1 OVERALL BLOCK DIAGRAM.................................................................................................................. 20
3.2 DVD SECTION BLOCK DIAGRAM .......................................................................................................... 22
3.3 OVERALL WIRING DIAGAM ................................................................................................................... 24
B
3.4 FM/AM TUNER MODULE ........................................................................................................................ 28
3.5 DVDM ASSY(1/3)..................................................................................................................................... 30
3.6 DVDM ASSY(2/3)..................................................................................................................................... 32
3.7 DVDM ASSY(3/3)..................................................................................................................................... 34
3.8 DECK ASSY ............................................................................................................................................ 36
3.9 IF/AF ASSY(1/3) ...................................................................................................................................... 38
3.10 IF/AF ASSY(2/3) .................................................................................................................................... 40
3.11 IF/AF ASSY(3/3) .................................................................................................................................... 42
3.12 DSP ASSY(1/2)...................................................................................................................................... 44
3.13 DSP ASSY (2/2)..................................................................................................................................... 46
3.14 DISP ASSY ............................................................................................................................................ 48
C 3.15 MIC ASSY .............................................................................................................................................. 50
3.16 EVOL ASSY ........................................................................................................................................... 52
3.17 MOD. AMP ASSY................................................................................................................................... 54
3.18 SP-TERMINAL and TRADE ASSYS ...................................................................................................... 56
3.19 PRIMARY ASSY .................................................................................................................................... 58
3.20 SECONDARY ASSY .............................................................................................................................. 60
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 62
4.1 LOAB ASSY ............................................................................................................................................. 62
4.2 FM/AM TUNER MODULE ........................................................................................................................ 63
4.3 DVDM ASSY ............................................................................................................................................ 64
4.4 IF/AF ASSY.............................................................................................................................................. 66
4.5 DSP ASSY (XV-EV61 Only)..................................................................................................................... 70
D 4.6 MIC ASSY ................................................................................................................................................ 71
4.7 DECK ASSY ............................................................................................................................................ 72
4.8 DISP1, DISP2 and DISP3 ASSYS ........................................................................................................... 74
4.9 EVOL ASSY ............................................................................................................................................. 76
4.10 SP-TERMINAL and TRADE ASSYS ...................................................................................................... 80
4.11 MOD. AMP ASSY................................................................................................................................... 82
4.12 PRIMARY ASSY .................................................................................................................................... 84
4.13 SECONDARY......................................................................................................................................... 86
5. PCB PARTS LIST ........................................................................................................................................... 88
6. ADJUSTMENT ............................................................................................................................................. 101
6.1 DECK SECTION .................................................................................................................................... 101
6.1.1 Adjustment condition ....................................................................................................................... 101
E 6.1.2 Playback and Recording section ..................................................................................................... 102
6.2 TUNER SECTION .................................................................................................................................. 104
6.3 DVD SECTION ADJUSTMENT ITEMS ana LOCATION........................................................................ 105
6.4 JIGS and MEASURING INSTRUMENTS .............................................................................................. 105
6.5 NECESSARY ADJUSTMENT POINTS ................................................................................................. 106
6.6 TEST MODE .......................................................................................................................................... 107
6.7 MECHANISM ADJUSTMENT ................................................................................................................ 108
7. GENERAL INFORMATION ........................................................................................................................... 110
7.1 DIAGNOSIS ........................................................................................................................................... 110
7.2 PARTS.................................................................................................................................................... 145
7.3 CLEANING............................................................................................................................................. 158
8. PANEL FACILITIES ...................................................................................................................................... 159
F

4 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

1. SPECIFICATIONS
Specifications A

Amplifier Section
X-EV61DVD model
Continuous power output:
Front . . . . . . . . . . . . . . . . . . . . . 75 W per channel Miscellaneous
(1kHz, 10 % T.H.D., 6 Ω) Power requirements . . . . . . AC 110-127/220-230/
Center . . . . . . . . . 75 W (1kHz, 10 % T.H.D., 6 Ω) 240 V (switchable), 50/60 Hz
Surround . . . . . . . . . . . . . . . . . 75 W per channel Power consumption
(1kHz, 10 % T.H.D., 6 Ω) X-EV61DVD model
Subwoofer . . . . . 75 W (100Hz, 10 % T.H.D., 6 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 W
X-EV31DVD model
X-EV31DVD model
Front . . . . . . . . . . . . . . . . . . . . . . . . . . 75 W + 75W
(1 kHz, 10 % T.H.D., 6 Ω)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 W B
Subwoofer . . . . 100 W (100Hz, 10 % T.H.D., 6 Ω) Power consumption in standby mode . . . 0.5 W
Dimensions:
DVD Tuner Deck Receiver
Disc section . . . . . . . . . . . . . 170 (W) x 350.5 (H) x 335 (D) mm
Digital audio Weight:
characteristics . . . . . . . . . DVD fs: 96 kHz, 24-bit DVD Tuner Deck Receiver
Type .DVD system, Video CD/Super VCD system
XV-EV61 . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 kg
and Compact Disc digital audio system
XV-EV31 . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2 kg
Frequency response . . . . . . . . . . . 4 Hz to 44 kHz
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 dB
Dynamic range . . . . . . . . . . . . . . . . . . . . . . .95 dB Accessories (Stereo DVD Cassette Deck
Total harmonic distortion . . . . . . . . . . . . . 0.005 % Receiver)
Wow and Flutter . . . . . . . . Limit of measurement Remote control ......................... 1
(±0.001 % W.PEAK) or less (JEITA) Power cord ....................... 1
C
Video cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Cassette deck section AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . 1
Systems . . . . . . . . . . . . 4 track, 2-channel stereo FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Heads . . . . . . . . . . . Recording/playback head x 1
Dry cell batteries (AA/R6) . . . . . . . . . . . . . . . . . . 2
Erasing head x 1
Motor . . . . . . . . . . . . . . . . . . . DC servo motor x 1 Operating instructions . . . . . . . . . . . . . . . . . . . . . 2
Tape types . . . . . . . . . . . . . . . . . . Type I (Normal)

FM tuner section
Frequency range . . . . . . . . . . . . . . 87.5 – 108MHz
Antenna . . . . . . . . . . . . . . . . . . 75 Ω, unbalanced

AM tuner section
D
Frequency range
With 9 kHz step . . . . . . . . 531 kHz to 1,602 kHz • Specifications and design subject to
With 10 kHz step . . . . . . . 530 kHz to 1,700 kHz possible modification without notice,
Antenna . . . . . . . . . . . . . . . . . . . . . . Loop antenna
due to improvements.

Manufactured under license from Dolby "DTS" and "DTS Digital Sur round" are registered
Laboratories. “Dolby” , “Pro Logic” , and the trademarks of Digital Theater Systems, Inc.
double-D symbol are trademarks of Dolby Manufactured under license from Digital Theater
Laboratories. Systems, Inc.

Accessories

E
TOP MENU

DVD MENU
MONO SYSTEM DISP
DVD DISP

RETURN

FOLDER +

XXD3060
LINE

¢
ZOOM

VOLUME
MUTE

ENTER
CLEAR
E/

0
ST +
CLOCK ADJ.

TV CONTROL
FM/AM

SUBTITLE ANGLE

CHANNEL

5.1ch DVD SURROUND SYSTEM

RANDOM
TIMER

SLEEP
VOLUME

6
9
ENTER
TUNE +

TUNE –

33
DVD

3
SURROUND ADVANCED

CH LEVEL
I — KEYCON — i

REPEAT
TAPE

KARAOKE ECHO

INPUT
2

5
8
8

AC Power Cord
STANDBY/ON

DSP

SYSTEM SETUP

Video Cord
ST –

FOLDER –

TEST TONE
PROGRAM
DVD/CD

AUDIO

/e

SHIFT
SOUND

4
1

4
7

(ADG1154)
HOME
MENU

MODE

(VDE1065)

Remote control unit

(XXD3060 : EV61)
AM loop antenna (XXD3061 : EV31)
(ATB7009) FM wire antenna
(ADH7004) AA size IEC R6P
Dry cell batteries (x2)

XV-EV61 5
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2. EXPLODED VIEWS AND PARTS LIST

NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
A The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
2.1 PACKING

B
STANDBY/ON
2
DVD/CD TAPE FM/AM

AUDIO SUBTITLE ANGLE ZOOM

LINE

9
DSP DVD DISP
SURROUND
ADVANCED MONOSYSTEM DISP

3
I — KEYCON — i
KARAOKE ECHO TIMER MUTE

CLOCK ADJ.

VOLUME
SYSTEM SETUP

DVD SETUP
TUNE +

ENTER
TOP MENU

DVD MENU
10
SOUND
MODE RETURN
TUNE –

1
/e

FOLDER –

4 8
33
3

7
E/
¡
FOLDER +

¢
12
PROGRAM REPEAT RANDOM

1 2 3 CLEAR
TEST TONECH LEVEL SLEEP

4 5 6 ENTER

7 8 9 0
TV CONTROL

INPUT CHANNELVOLUME
SHIFT SELECT

13
11

14
C

Yellow
15

6
D

Junction

6 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

PACKING parts List

Mark No. Description Part No. Mark No. Description Part No.
1 Operating Instructions XRB3026 8 • • • •
A
(English) > 9 AC Power Cord ADG1154
2 Operating Instructions XRC3109
(Chinese) 10 Remote Control Unit See Contrast table (2)
NSP 3 Polyethylene Bag AHG1180 11 Battery Cover AZA7424
(0.03 x 230 x 340) 12 FM Anternna ADH7004
13 AM Loop Anternna ATB7009
4 Packing Sheet XHG3010 14 Video Cord (Yellow 1P) VDE1065
5 Front Pad XHA3136
6 Rear Pad XHA3137 NSP 15 Dry Cell Battery (AA/R6) VEM1031
7 Packing Case See Contrast table (2)

B
(2) CONTRAST TABLE
XV-EV61/DLXJ/NC and XV-EV31/DLXJ/NC are constructed the same except for the following :
Mark No. Symbol and Description XV-EV61/DLXJ/NC XV-EV31/DLXJ/NC
7 Packing Case XHD3355 XHD3360
10 Remote Control Unit XXD3060 XXD3061

XV-EV61 7
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2.2 EXTERIOR SECTION

A 32 43
27 3 XV-EV61
Only 17
48 5 46 40
32
46
D C 31
45
C F
K
12 8
32
15 M
A 32
45
32
9
L E 2
B 11
10
32
47
To Cassete
34 Deck from
B
32 D Secondary
14 Assy

25
32
21
34
Refer to 22
C 33 "2.4 LOADING MECHA. ASSY".

6
J
I
13

H
33 24
33 G 16
36 F
E
37 46 26
33
1 K 35
D 32
23
C
Refer to
I J
"2.4 FRONT PANEL SECTION".
4 31
38 H
38 L 10 M
47 A
32

B 12
G
M
F 18
E
38 D
B
11 14
E
30

49

29 Refer to
28 "2.3 AMP SECTION".
C
NON-CONTACT

CONTACT SIDE

7 32
SIDE

8 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

EXTERIOR SECTION parts List

Mark No. Description Part No. Mark No. Description Part No.
1 FM/AM TUNER Module AXQ7228
26 DECK PCB Holder XNG3115 A
2 IF_AF Assy See Contrast table (2)
3 DECK Assy See Contrast table (2) 27 Bonnet Case XZN3132
4 DVDM Assy See Contrast table (2) NSP 28 Tray Panel XAK3398
5 DSP Assy See Contrast table (2) NSP 29 Tray Cap XAK3397
30 Front Panel Assy See Contrast table (2)
NSP 6 LOADING MECHA Assy VWT1208
NSP 7 Earth Lead Wire DE007VF0 31 Screw VPZ30P080FZK
NSP 8 Earth Lead Wire DE015VF0 32 Screw BBZ30P080FZK
9 11P Flat Flexible Cable XDD3142 33 Screw BBZ30P080FMC
10 13P Flat Flexible Cable XDD3140 34 Screw BBZ30P080FNI
35 Push Rivet XEC3034
B
11 30P Flat Flexible Cable XDD3137
12 30P Flat Flexible Cable XDD3143 36 Adaptor 02 L ANW7267
NSP 13 DVD ASSY See Contrast table (2) 37 Adaptor 02 R ANW7268
14 12P Flat Flexible Cable XDD3141 38 Screw BPZ30P080FMC
NSP 15 Laser Caution Label VRW1699 39 • • • •
NSP 40 SISIR Label XAX3397
16 Mecha Frame XNG3102
17 Rear Panel A See Contrast table (2) 41 • • • •
18 Rear Panel B See Contrast table (2) 42 • • • •
19 • • • • NSP 43 ID Label VXW1002
20 • • • • 44 • • • •
C
45 Screw BPZ30P080FNI
21 DVD Shield XNG3103
22 Pri Holder XMR3084 46 Screw BCZ30P060FMC
23 Barrier S AEC7429 NSP 47 FFC Cable See Contrast table (2)
24 FFC Barrier A XEC3048 48 Rivet AEC7205
25 FFC Barrier B XEC3053 49 Tray Cap Assy XXG3155

(2) CONTRAST TABLE

XV-EV61/DLXJ/NC and XV-EV31/DLXJ/NC are constructed the same except for the following :
XV-EV61/ XV-EV31/
Mark No Symbol and Description D
DLXJ/NC DLXJ/NC
2 IF_AF Assy XWZ3726 XWZ3733
3 DECK Assy XWX3072 XWX3073
4 DVDM Assy AXM7808 AXM7809
5 DSP Assy AWX8254 Not used
NSP 13 DVD Assy AXA7121 AXA7122

17 Rear Panel A XNC3205 XNC3226

18 Rear Panel B XNC3206 XNC3233
30 Front Panel Assy XXG3156 XXG3158
NSP 47 FFC Cable XDD3138 XDD3139

XV-EV61 9
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2.3 AMP SECTION

3 26
26

35

2
36
L M
B
D
35
7
C

B 27 35
27
35 31 32 34
32
35

27 33
23
35 31
23
27

To IF/AF Assy
C
35
33 D 35 40
C
27 27
B 5 21 27
39

Q
1
28
27
4 29 38 28
27 29
K 27
D N

27
41

A 14

26
11 22

E 9
16 10
19 10

18
A

P
NON-CONTACT

CONTACT SIDE

13
36
SIDE

10 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

AMP SECTION parts List

Mark No. Description Part No. Mark No. Description Part No.
1 E-VOL Assy See Contrast table (2) 25 ••••••••
A
2 TRADE Assy See Contrast table (2)
3 AMP Assy See Contrast table (2) 26 Binder ZCA-SKB90BK
4 SP-TERMINAL Assy See Contrast table (2) 27 Screw BBZ30P080FZK
5 SECONDARY Assy See Contrast table (2) 28 Screw VPZ30P080FZK
29 Screw ASZ40P060FMC
6 PRIMARY Assy XWZ3738 30 FAN Holder ANG7417
7 16P F. F. C./30V XDD3144
8 13P Jumper Connector 52151-1310 31 FET Bracket A ANG7418
> 9 Fuse (FU1 : T5A) REK1029 32 Heat Sink ANH7159
> 10 Fuse (FU2, FU3 : T2.5A) See Contrast table (2) 33 FAN Plate ANG7462
34 DC FAN Motor AXM7025
B
> 11 Power Transformer (T1) See Contrast table (2) 35 Screw BBZ30P140FMC
12 14P Jumper Connector 52151-1410
NSP 13 Chassis XNA3016 36 Screw BBZ30P300FZK
14 Rear Panel B See Contrast table (2) 37 ••••••••
15 •••••••• 38 Screw BCZ30P060FMC
39 Module Holder R XNG3113
16 Module Holder F XNG3112 40 J1 Wire Cable XDX3065
17 4P Jumper Connector 52151-0410
18 Push Rivet AEC7120 41 Speaker Label See Contrast table (2)
19 Leg Cushion XEB3028
20 •••••••• C

21 FAN Barrier XEC3050

22 Primary Holder XMR3084
23 Push Rivet XEC3034
24 ••••••••

(2) CONTRAST TABLE

XV-EV61/DLXJ/NC and XV-EV31/DLXJ/NC are constructed the same except for the following :
XV-EV61 XV-EV31
Mark No Symbol and Description
/DLXJ/NC /DLXJ/NC
1 E-VOL Assy XWZ3736 XWZ3741 D
2 TRADE Assy XWZ3740 XWZ3745
3 AMP Assy AWM7720 AWM7787
4 SP-TERMINAL Assy XWZ3737 XWZ3742
5 SECONDARY Assy XWZ3739 XWZ3743

> 10 Fuse (FU2, FU3) AEK1058 AEK1059

(2.5A/250V) (3.15A/250V)
> 11 Power Transformer (T1) XTS3070 XTS3071
14 Rear Panel A XNC3205 XNC3226
41 Speaker Label XAX3401 Not used

XV-EV61 11
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2.4 FRONT PANEL SECTION

33

1
33
A

I
9
8 33
B 13
11
B
6
33
7
H
A
2
16
21
26 17
30
22
15

C 12
24
27
29
23
36

33
3 33
43 33

25
14 18 19
G
D 17
B

33 33

31 41

J
34 5 40
33
37
38

E 42
20 32
10

33

O
NON-CONTACT

CONTACT SIDE

4
39
35
SIDE

12 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

FRONT PANEL SECTION parts List

Mark No. Description Part No. Mark No. Description Part No.
1 DISP 1 Assy XWZ3727 23 VOL. Button Assy XXG3159
24 Dolby Button L XAD3167 A
2 DISP 2 Assy XWZ3728
3 DISP 3 Assy XWZ3729 25 Dolby Button R XAD3168
4 H.P Assy XWZ3731
5 MIC Assy See Contrast table (2) 26 FUNC. Button XAD3169
27 Play LT Cond XAK3402
6 4P Jumper Connector D20PYY0420E 28 • • • •
7 LCD XAV3017 29 Play Button XAD3171
8 8P Jumper Connector D20PYY0805E NSP 30 Front Panel See Contrast table (2)
9 LCD Holder XMR3074
10 MIC Knob XAA3024 31 Damper Assy AXA7052
32 Leg Cushion XEB3028
B
11 Diffusion Sheet XAK3400 33 Screw VPZ30P080FZK
NSP 12 Display Window XAK3392 NSP 34 DECK Door XAN3052
13 LCD LT Cond XAK3399 35 DECK Mechanism Unit XYM3016
NSP 14 Grille Panel A See Contrast table (2)
15 Sensor Cover XAK3396 36 Front Panel Assy See Contrast table (2)
NSP 37 DECK Panel XAK3394
16 Timer Lens XAK3403 38 Door Spring R XBH3002
17 FUNC. LT Cond XAK3401 39 Earth Led Wire DE007VEO
18 Ratch Mold R XMR3002 40 GND Plate XNG3104
19 Ratch Spring R ABH7131
NSP 20 Grille Panel B XAK3395 41 Binder ZCA-SKB90BK
C
42 DECK Shield Wire XDE3062
21 Display Button L XAD3165 43 DECK Door Assy XZN3136
22 Display Button R XAD3166

(2) CONTRAST TABLE

XV-EV61/DLXJ/NC and XV-EV31/DLXJ/NC are constructed the same except for the following :
Mark No. Symbol and Description XV-EV61/DLXJ/NC XV-EV31/DLXJ/NC
5 MIC Assy XWZ3730 XWZ3734
14 Grille Panel A XAK3393 XAK3420
NSP 30 Front Panel XMB3123 XMB3125 D
36 Front Panel ASSY XZN3134 XZN3135

XV-EV61 13
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2.5 LOADING MECHANISM ASSY

A Note: 8 2 Refer to
"2.7 TRAVERSE MECHA. ASSY-S".
6
" Application of Lubricant"
8
8
To DVDM CN101 (Pickup Assy-S)
To DVDM CN104 (Stepping Motor)
Daifree
To DVDM CN105 (Spindle Motor)
GEM1036
8

12
18 20
Lubricating Oil 3
GYA1001

13
23 A 22
17
4 5
16

C 22 19

21

15
22
7 A

10
14
11
Lubricating Oil
D GYA1001

1
9 A
22

LOADING MECHANISM ASSY parts List

Mark No. Description Part No. Mark No. Description Part No.
NSP 1 LOAB Assy VWG2346 16 Drive Gear VNL1923
2 Traverse Mechanism Assy-S VXX2871 17 SW Lever VNL1925
3 Loading Motor Assy VXX2872 18 Clamper Plate VNE2251
4 Motor Pulley PNW1634 19 Bridge VNE2252
E 20 Clamper VNL1924
5 Carriage DC Motor / 0.3W VXM1105

6 Flexible Cable (26P) VDA1944 21 Screw JGZ17P028FMC

7 Connector Assy 2P VKP2286 22 Screw Z39-019
8 Float Rubber VEB1351 23 Tray VNL1920
9 Belt VEB1330
10 Stabilizer VNE2253

11 Loading Base VNL1917

12 Float Base DVD VNL1918
F 13 Drive Cam VNL1919
14 Gear Pulley VNL1921
15 Loading Gear VNL1922

14 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Application of Lubricant
Lubricating Oil A
GYA1001
Around the shaft

No. 11
Loading Base

Lubricating Oil
GYA1001

Lubricating Oil Lubricating Oil

No. 13 GYA1001 GYA1001
Lubricating Oil Inner side of a ditch Inner side of a ditch C
GYA1001 Drive Cam

Lubricating Oil Lubricating Oil

GYA1001 GYA1001 No. 13
Drive cam
Front View Rear View
D

Daifree
Daifree
No. 23 GEM1036
No. 23 GEM1036
Tray Concave of unevenness Tray Concave of unevenness

E
Inner side of a ditch
Daifree
GEM1036

Top View Bottom View

Side of the rib
Concave of unevenness
Daifree Daifree
GEM1036 GEM1036
F

XV-EV61 15
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2.6 TRAVERSE MECHANISM ASSY

15 (Torque: 0.12 ± 0.01 N•m)

17 Silicone Adhesive
GEM1037
3
8
10 17

B
17
10
7

1
6 To
DVDM CN101
(Pickup Assy)

12

C 14
9
13 4 (Adjustment screw)
16

Silicone Adhesive
GEM1037

D Screw Tight
5 GYL1001 15 (Torque: 0.12 ± 0.01 N•m)
(Adjustment spring)
To DVDM CN105
(Spindle Motor)

16
2

To
E DVDM CN104
(Stepping Motor)
NON-CONTACT

CONTACT SIDE

11
SIDE

16 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

TRAVERSE MECHANISM ASSY parts List

Mark No. Description Part No.
1 Spindle Motor VXM1099
A
2 Stepping Motor VXM1101
> 3 Pickup Assy-S OXX8005
4 Skew Screw VBA1080
5 Skew Spring VBH1335

6 Guide Bar VLL1514

7 Sub Guide Bar VLL1515
8 Leaf Spring VNC1023
9 Joint Spring VNC1019
10 Support Spring VNC1020

B
NSP 11 Mechanism Chassis VNE2248
12 Damper Sheet VEB1335
13 Spacer VNL1913
14 Joint 03 VNL1949
15 Tapping Screw OBA8021

16 Screw BBZ20P050FZK
17 Screw PMA26P100FMC

XV-EV61 17
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

2.7 DECK MECHANISM ASSY

10

B
1

4
A

E
9
A

NON-CONTACT
CONTACT SIDE

SIDE

18 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

DECK MECHANISM ASSY parts List

Mark No. Description Part No.
1 Main Belt FF19N-22
A
2 F/R Belt FF19S-31
3 Plate HD Blk F513-847
4 Roller Pinch Blk R F514-133
5 Roller Pinch Blk L F514-134

6 Clutch Assy Blk F522-063

7 Motor Main Blk F525-334
8 PCB Control Blk F567-705
9 11P F. F. C / 30V XDD3142
10 18P F. F. C / 30V XDD3138

XV-EV61 19
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

3.1 OVERALL BLOCK DIAGRAM
A

3.1.1 SIGNAL ROUTE(1/2)

E IF/AF ASSY

CN5903 VDVD
Refer to 3.1.2 SIGNAL ROUTE(2/2)
VPR

IC 901

B
CN

B DVDM ASSY
IC 701 (D)
CN5905

(V)

(Y)

(C)

C
16,17
CN5801

IC 501 3 2

D DECK ASSY 89
(D)

EV-61 : PDC108A
7
EV-31 : PDC109A
61 62 20 21,22

2 4 3 7 8,9 3
CN5509 CN5505
CN5501

17 16 2

CN2506
RECL

PBL

CN8003
3

(REC) IC8201
AK4114VQ

E
I DISP1 ASSY
CN5101

IC8501
DSPD56367PV150
2
11 12 7 5,6

DSP ASSY
F XV-EV61 Only

20 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

SIGNAL ROUTE (SL)

(PB) : SL AUDIO SIGNAL
(V)
JA5903 : PB SIGNAL (FL)
(Y)
(REC) : FL AUDIO SIGNAL
: RECORDING SIGNAL (C)
(TX) : C AUDIO SIGNAL
(C) : AUDIO SIGNAL (TUNER) (SW)
(V) : SW AUDIO SIGNAL
: V SIGNAL VIDEO (D)
: DIGITAL AUDIO ROUTE
(Y)
: Y SIGNAL VIDEO
(C)
: C SIGNAL VIDEO

(PB) J MIC ASSY

(TX)

(PB) JA5401

CN5401

CN3002
(PB)
(PB)
C
(REC)

CN5105
IC8301
O H.P ASSY
JA3901

CN5506 J3902
(TX)

CN5701
D
CN8303

C M 6ch AMP ASSY

FM/AM TUNER CN3008
HP
MODULE AMP
CN5506

AK4529VQ
CN8007
E
IC3401
STK402-270
BD3814FV
CN3011 CN3002

K EVOL ASSY FL OUT

SW OUT SP-TERMINAL
N ASSY
F
CN3007 CN3012 CN3307 CN3305
SL
C
SW
FL

XV-EV61 21
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.2 DVD SECTION BLOCK DIAGRAM

A
3.1.2 SIGNAL ROUT(2/2)

B DVDM ASSY
IC603 IC602
X301 VYW2077 K4S641632F-TC75
20MHz FLASH ROM 64M SDRAM
B OEIC CN1013 CN101
(24P) (24P)
SPINDLE 87 86
LD(650) Q201,Q202
MOTOR 7 18 89 LD1 FREIN FREOUT
V V
LD(780) CV_OUT 34
9 16 90 LD2 S_Y S_Y
Q211,Q212 IC301 Y_OUT 32
A
17 8 6 A STM6316ATXXA S_C S_C
Front End IC C_OUT 33
C
19 6 8 B
R/Cr R/Cr
B1 R_OUT 27
16 9 14 C OUT_DATA FE DATA B_DATA G/Y G/Y
B2 64 16 G_OUT 26
15 10 12 D B/Cb B/Cb
B3 B_OUT 25
22 3 21 E
B4 PC(6) PD(0) PE(1) PC(2)
21 4 20 F
TRKG DRV 44 55 70 38
PICKUP 2 23
SPDL PDM

LOAD DRV

ASSY-S TRKG RTN

3 22
CLOSE

OPEN

FOCS DRV
C 4 21
FOCS RTN
1 24
26 40
30 TO- SPIN LOIN+
31 TO+ IC601
STM5589CVA PCMDATA0 A DATA0
CN105 34 FO- 52
Back End IC
(12P) 35 FO+
H3- 4 16 HW-
H3+ 5 17 HW+
H2- 6 18 HV- SPDIF DOUT
57
H2+ 7 19 HV+
H1- 8 20 HU-
H1+ 9 21 HU+ IC101
M63018FP
CN104 FTS Driver
ST2-
D STEPPING 4 6 SL2-
MOTOR M ST2+
3 5 SL2+
ST1+
2 9 SL1+
ST1- PIXCLK
1 10 SL1-
120

CN602 CN601 CN103

LOAD- IC604 TC7WU04FU
2 1 1 36 LO+
(3/3) (2/3)
– + LOAD+
M 1 2 2 37 LO- 5 3 2 6
LOADING
MOTOR SW2 CLOSE
ASSY 3 3
V+3D
X601
S101 4 4 27MHz
SW1 OPEN
5 5
IC411

A LOAB ASSY
V+3R3_FED PQ018EZ01ZP
V+1R8_FED V+1R8_FEA V+3R3_FEA V+3R3_FED V+3R3
E 1.8V Reg.

3 1

IC421
PQ018EH01ZP
V+1R8_BE 1.8V Reg. V+3D

3 1

22 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

IC501 B
MM1623AF CN923
EV61 Only
Video Driver Amp. (18P)
V V V IN V OUT V
4 23 16 V
S_Y S_Y Y IN Y OUT S_Y
6 21 18 S_Y
S_C S_C C IN C OUT S_C
2 26 14 S_C
R/Cr R/Cr
14
Cr IN Cr OUT
16
R/Cr
12 R/Cr
E CN5905
G/Y G/Y CY IN CY OUT G/Y
10 20 8 G/Y
B/Cb B/Cb Cb IN Cb OUT B/Cb
12 18 10 B/Cb
3 13
MUTE1 MUTE2 CN902
(11P) EV31 Only
4 V

6 C
C
IC701 2 Y
PCM1742KE
Audio 2ch DAC E CN5904
VoutL
A DATA0 DATA 7 8 DVDL
2 VoutR
8 10 DVDR

CN901
(30P)
DOUT DOUT
21
XDVDRST
17
IC911 SYS_CS1
TC74VHC08FT 16
5V → 3V Converter 15
SYS_CS2

SDATA
13 D
IC901 SCLK
TC74VHC125AFT 14
3V → 5V Converter MDATA
12
ACK
11
DVDTRKUP
7
DVDPOWER
18
VDET
8
XVMUTE
E CN5903
5
V+12 VDVD+12
Q451
VDVD+12
30

IC401
R1224N102H
VPR+8
3V Reg. E
VPR+8
3 6 29
VPR+8
28
IC431
MM1565AF
V+5D V+5V V+5 5V Reg.

1 7

IC441 VPR+8M
PQ20WZ11
V+6 6V Reg. VPR+8M
27
VPR+8M
3 1 26

XV-EV61 23
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.3 OVERALL WIRING DIAGAM

3.3.1 OVERALL WIRING DIAGRAM (1/2)

To-OVERALL WIRING DIAGRAM (2/2)

D20PYY1520E
K J3002

DECK CN8302
MECHA. (XYM3016)

CN8334 CN5507
CN8011
B

/ XV-EV61)
CN8281

DSP ASSY
CN8280

F F 1/2 - 2/2 (AWX8254

CN8003 CN5505

C
DECK ASSY
CN2301 D (XWX3072/XV-EV61)
(XWX3073/XV-EV31)

CN8007 CN5506
CN2506

CN2302

J5102 CN5102
H DISP1 ASSY
(XWZ3727)

I CN5503

DISP2 ASSY
(XWZ3728)
J5103

E
G MIC ASSY
CN5104

(XWZ3730/
DISP3 ASSY XV-EV61)
(XWZ3729) (XWZ3734/
XV-EV31) CN5501

J CN5105

24 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST"

To-OVERALL WIRING DIAGRAM (2/2)

K CN3001 XDD3143
CN8303

CN201 (RF)

FM/AM TUNER
CN5701 : RF SIGNAL ROUTE
B

(AXQ7228)
MODULE
(F)
: FOCUS SERVO LOOP LINE
(T)
: TRACKING SERVO LOOP LINE
(S)
: STEPPING SERVO LOOP LINE

C
DVD ASSY (AXA7123)

CN5903 CN901 PICKUP ASSY-S (OXX8005)

DVDM ASSY (AXM7808/XV-EV61)

(RF) C
E ( E 1/2- E 2/2 ( (RF)

(RF)
IF/AF ASSY
B B 1/3- B 3/3
(RF)
(XWZ3726 / XV-EV61) (RF)
(XWZ3733 / XV-EV31) (RF)

(F)
(T) D
)T(
(F)
CN5905 CN903
CN5801
(S) STEPPING
MOTOR
(S) : VXM1101
DVDM ASSY (AXM7809/XV-EV31)

(S)
(S)
SPINDLE MOTOR
: VXM1099

E
CN5904 CN902

A LOAB ASSY
CN5502

CN5902

(VWG2346)

LOADING MOTOR
ASSY : VXX2505

A
XV-EV61 25
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.3.2 OVERALL WIRING DIAGARAM (2/2)

A

M AMP MODULE ASSY

(AWM7720 / XV-EV61)
(AWM7787 / XV-EV31)

L TRADE ASSY
(XWZ3740/XV-EV61)
(XWZ3745/XV-EV31)
C

D
N
SP-TERMINAL K E-VOL ASSY
ASSY (XWZ3736/XV-EV61)
(XWZ3737 (XWZ3741/XV-EV31)
/XV-EV61)
(XWZ3742
/XV-EV31)

E CN8302

E IF/AF ASSY

26 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

O HP ASSY
(XWZ3731) P
PRIMARY ASSY B
(XWZ3738)

T1
POWER
TRANSFORMER
XTS3070:XV-EV61
XTS3071:XV-EV31

(XWZ3739/XV-EV61)
(XWZ3743/XV-EV31)
SECONDARY ASSY
C

K E-VOL ASSY
Q D
(XWZ3736/XV-EV61)
(XWZ3741/XV-EV31)

E CN8303

E IF/AF ASSY

XV-EV61 27
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.4 FM/AM TUNER MODULE

C FM/AM TUNER MODULE (AXQ7228)

B
FM FRONT END
(FM)

(FM)
(FM)

(FM)
(FM)
C

(FM)
(FM)

(FM) (FM)
(AM) (AM)
(AM)
(AM)

MW RF TUNING BLOCK
(AM)

(FM)
D

(AM)

OSC : 981 - 2052kHz 9k step

C
28 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

: The power supply is shown with the marked box.

(TX)
: AUDIO SIGNAL ROUTE (TUNER)
(AM)
: AM SIGNAL ROUTE
(FM)
: FM SIGNAL ROUTE
B
(AM)
(AM)

CN5701
(AM)

(AM)
(AM)

(TX)
(FM)
(TX)
(AM)

E
C
(AM)
(FM)
(AM)

(TX)
(TX) CN201

(FM) (FM)
(TX)
(AM)
L201

ATE7003
D

C
XV-EV61 29
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.5 DVDM ASSY(1/3)

A
B 1/3 DVDM ASSY
(AWM7808/XV-EV61)
(AWM7809/XV-EV31)
A CN601

B
STEPPING

(S)
MOTOR

(S)
(S)
(S)

(S)
(S)

(F)
(S) (F)
C
SPINDLE MOTOR

(S)

3 (T)
(T)

(F)
(T)
(T)
(F)
PICKUP ASSY-S

(RF)
(RF)
(RF)

(RF)

(RF)
(RF)

B 1/3
30 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

A
: FE DATA SIGNAL ROUTE
(RF)
: RF SIGNAL ROUTE
(F)
: FOCUS SERVO LOOP LINE
(T)
: TRACKING SERVO LOOP LINE
(S)
: STEPPING SERVO LOOP LINE

B 2/3
B

C
5

D
(RF)

(RF)
(RF)

(RF)

(RF)
(RF)
(RF)

(RF)

(RF)

(RF)

(RF)
(RF)

E
(RF)

(RF)

(RF)

(RF)

(RF)

(RF)

B 1/3
XV-EV61 31
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.6 DVDM ASSY(2/3)

DVDM ASSY
A
B 2/3 (AWM7808/XV-EV61) (AWM7809/XV-EV31)

E
(D)

(AD) (AD)
(C/V)
(C)
(Y)

B 2/3
32 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

: FE_DATA SIGNAL ROUTE

(RF)
: RF SIGNAL ROUTE
(C/V)
: VIDEO SIGNAL ROUTE (C/V)
(Y)
: S VIDEO SIGNAL ROUTE (Y)
(C)
: S VIDEO SIGNAL ROUTE (C)
(AD)
: AUDIO DATA SIGNAL ROUTE
(D)
: AUDIO SIGNAL ROUTE (DIGITAL)
(DVD)
: AUDIO SIGNAL ROUTE (DVD_L ch)
B

B 3/3
6
7 10
8 9 11
(AD) C

(C) (C)
(DVD)

(C/V) (C/V)

(Y) (Y)
(C)

D
(DVD) (DVD)
B 3/3
XV-EV31 Only
(C/V)
(Y)

(C)
14 (C)
(C/V)
(Y)
(Y) 12 (C/V)
13
(CY/G)
E
15 (PB/B)
16 (PR/R)
17
XV-EV31 Only

XV-EV61 Only

F
XV-EV61 Only

B 1/3
B 2/3
XV-EV61 33
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.7 DVDM ASSY(3/3)

B 2/3

B 3/3
34 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

B 3/3 DVDM ASSY : The power supply is shown with the marked box. A

(AWM7808/XV-EV61)
(AWM7809/XV-EV31)

(D) (D)

CN5903
E
B 2/3
C

(Cr/R)
: VIDEO SIGNAL ROUTE (Cr/R)
(CY/G)
: VIDEO SIGNAL ROUTE (CY/G)
XV-EV31 Only (Cb/B)
: VIDEO SIGNAL ROUTE (Cb/B)

(Y) (Y) (Y) (Y)

(C/V) (C/V) 12 (C/V)

B 2/3 (C) (C) 8 (C)
(C/V)
D
(C)

E 1/3 CN5905
(Cr/R) (Cr/R) 13 (Cr/R) (Cr/R)

(Cb/B) (Cb/B) 11 (Cb/B) (Cb/B)

(CY/G) (CY/G) 9 10 (CY/G) (CY/G)

B 2/3
(Y)
(C/V)

E
(C)

XV-EV31 Only

B 2/3
E 1/3 CN5904

(DVD)

(C/V)
: S VIDEO SIGNAL ROUTE (C/V) (C)
(Y) (C)
: S VIDEO SIGNAL ROUTE (Y)
(C/V) (C/V)
(C)
: S VIDEO SIGNAL ROUTE (C)
(Y) (Y)
(D)
: DIGITAL AUDIO SIGNAL ROUTE
F
(DVD)
: AUDIO SIGNAL ROUTE (DVD_L ch)

B 3/3
XV-EV61 35
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.8 DECK ASSY

A DECK ASSY
D (XWX3072/XV-EV61)
(XWX3073/XV-EV31)

(PB)
CN2301

(PB)

B CN2302

(REC)

(REC)

C (REC)

(REC)

(REC)

D
36 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

A
: The power supply is shown with the marked box.

(PB)

(PB)

(PB)
B

(PB)

(PB)
(REC)

EV61:-16.3dBV
EV31:- 6.5dBV

(REC)

(REC)
C

EV-61
EV-31

D
SIGNAL ROUTE
(PB)
: PB SIGNAL
(REC)
: RECORDING SIGNAL

E
(REC)
(PB)

CN2506

E CN5801 F

D
XV-EV61 37
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.9 IF/AF ASSY(1/3)

IF/AF ASSY
A E (XWZ3726/ XV-EV61)
(XWZ3733/ XV-EV31)
XV-EV61
Only

XV-EV61 CN5502
Only
CN5507

C
CN8011
F 2/2

CN5506

D
F 1/2 CN8007

(D)

XV-EV61
Only

E
CN8003

(D)
F 1/2

XV-EV61
Only

CN5505
CN5902

CN5903

from
F J1 Secondary
Q Assy

E 1/3 B CN901

38 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

B CN903,CN902 XV-EV61 Only A

EV61
: The power supply is shown with the marked box.

CN5905

E 2/3
(S_Y)

(S_C) CN5701
CN5904

XV-EV31

CN201
Only B

(TX)

C
CN5501

CN5101
C

I
CN5503

To. Mecha Deck

D

CN5801

D CN2506

E
E 2/3

XV-EV31
Only
E 2/3

SIGNAL ROUTE
(CD) (V)
: CD AUDIO SIGNAL ROUTE : V SIGNAL ROUTE F
(TX) (S_C)
: AUDIO SIGNAL ROUTE (TUNER) : S-VIDEO OUT C SIGNAL ROUTE
(D) (S_Y)
: DIGITAL SIGNAL ROUTE : S-VIDEO OUT Y SIGNAL ROUTE
E 1/3
XV-EV61 39
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.10 IF/AF ASSY(2/3)

(CD)

(AUX)
B (AUX) (AUX)

(AUX)
(TX)
(TX)

(CD)
C
(AUX)
1/3

XV-EV31 (TX)
Only
E

(PB)

(CD)
(CD)

XV-EV31
Only

(AUX)
D
(TX)

XV-EV61 Only
(REC)

(TX)
3/3

E
E

XV-EV31 Only
1/3

F
E

E 2/3
40 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

SIGNAL ROUTE A
(PB) (AUX)
: PB SIGNAL : AUX SIGNAL
(REC) (MIC)
: RECORDING SIGNAL : MIC OUT SIGNAL
(TX)
: AUDIO SIGNAL (TUNER)
(CD)
: CD SIGNAL

J J5401
CN5105

E 2/3 IF/AF ASSY

(XWZ3726 / XV-EV61)
(XWZ3733 / XV-EV31)

(MIC)
C

(MIC)

(REC)
(MIC) (TX) (MIC)
D

(REC) (TX) (REC)

EV31 Only

XV-EV61 Only
(REC)

(REC)

: The power supply is shown with the marked box.

E 2/3
XV-EV61 41
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.11 IF/AF ASSY(3/3)

A E 1/3

SIGNAL ROUT
(TX)
B : AUDIO SIGNAL (TUNER)
E 1/3

C
E 1/3

E
E 1/3

(TX) (TX)

E 3/3
42 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

A
XV-EV61 E 3/3IF/AF ASSY
Only
(XWZ3726 / XV-EV61)
(XWZ3733 / XV-EV31)

CN8302

J3002
K
C

CN8303 D

(TX)

CN3001

E
K

(TX)

: The power supply is shown with the marked box.

E 3/3
XV-EV61 43
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.12 DSP ASSY(1/2)

A F 1/2 DSP ASSY (AWX8254)

XV-EV61 : Only

F 2/2
F 2/2

(AD)
(AD)
(AD)

(AD)
(D)

(D)
(D)
(D)

(D)

D
(D)

(D)

(D) (D)

(D) (D) (D)

E

(D) (D) (D)

F 1/2 F 2/2
44 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

: AUDIO SIGNAL ROUTE (L ch)

(DVD) A
: AUDIO SIGNAL ROUTE (DVD Lch)
(D)
: AUDIO SIGNAL ROUTE (DIGITAL)
(AD)
: AUDIO DATA SIGNAL ROUTE
(FL)
: AUDIO SIGNAL ROUTE (Front L ch)
(SL)
: AUDIO SIGNAL ROUTE (Surround L ch)
(C)
: AUDIO SIGNAL ROUTE (Center ch)
(SW)
: AUDIO SIGNAL ROUTE (Sub Woofer ch)

E 1/3 CN5506
(AD) (AD) (FL)
(AD) (AD) (FL)
(AD) (AD)
(SL)
(AD) (SL)
(SW)
(SW)
(C)

(C)
C
(AD)
(DVD)

(DVD) (DVD)

3.3V Reg.

1.8V Reg.

(D) (D)
E

(D) (D)
(D)

(D)

E 1/3 CN5505
: The power supply is shown with the marked box. F 1/2
XV-EV61 45
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.13 DSP ASSY (2/2)

A
F 2/2 DSP ASSY (AWX8254)
XV-EV61 : Only

F 1/2
(AD) (AD)
(AD) (AD)
(AD) (AD)
(AD) (AD)

(D) (D)

F 1/2

F 1/2
E

F
E 1/3 CN5507
F 2/2 : The power supply is shown with the marked box.
46 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

(D)
: AUDIO SIGNAL ROUTE (DIGITAL) A
(AD)
: AUDIO DATA SIGNAL ROUTE

(AD) (AD)
(AD) (AD)
(AD) (AD)
(AD) (AD)

(D) (D)

F 2/2
XV-EV61 47
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.14 DISP ASSY

I DISP 1 ASSY
(XWZ3727) CN5104

G DISP 3 ASSY
(XWZ3728)

J5103
J5103

DISP 3 ASSY
S5301: KARAOKE
S5202: DOBLY NR
D S5203: ASES
S5204: PLAY/PAUSE H DISP 2 ASSY
(XWZ3728)
S5305: TUNING-
S5306: TUNING+
S5307: STOP
S5308: REVERSE
S5309: REC/STOP

G H I
48 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

A
E CN5501

DISP 1 ASSY
S5101: Sound by/ ON
S5102: SOUND MODE
S5103: EV-61_Advance Surround
EV-31_Virtual Surround
CN5101 S5104: EV-61_Surround
EV-31_SFC
S5105: Enter
S5106: ST Memory
S5107: Display
S5108: TIME/CLOCK ADJ
B

CN5102

H DISP 2 ASSY
(XWZ3728)
J5202
D

DISP 2 ASSY
S5201: DVD/CD
S5202: TAPE
S5203: TUNER
S5204: LINE
S5205: OPEN/CLOSE
S5206: VOL -
S5207: VOL+
E

: The power supply is shown with the marked box. F

H I
XV-EV61 49
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.15 MIC ASSY

B
JA5401

JA5402

H.P ASSY
O (XWZ3731)
CN3008

E
K

J O
50 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

J MIC ASSY
(XWZ3730 / XV-EV61)
(XWZ3734 / XV-EV31)

E CN5105

B
J5401

: The power supply is shown with the marked box. F

J
XV-EV61 51
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.16 EVOL ASSY

(C)
(SL)

B (SL)

(FL)
(FL)
E 3/3 CN8303

(C) (C)
(SL)

(FL)

(SL)
(SW)

(SL)
(C)
(C)

(FL)
E 3/3 CN8302

K Q CN3 O J3902

52 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

A
K E-VOL ASSY
(XWZ3736/XV-EV61)
(FL)
(FL)
(XWZ3741/XV-EV31)
(FL)

(FL)

CN3031
B
(C)
(FL)

L
(SL) (SL)
(SL) (SL)

(C)

(SW)

J3032
C

L
(SW)

(C) (FL)
(C)

(SW) (C)

J3033
(SW)

L
(FL)

(C)

(FL)
(FL)

R3955
EV61 : 270 /3W
R3955
(SL)

EV31 : 390 /3W

(C)

(FL)
: FL AUDIO SIGNAL ROUTE
(SL)
: SL AUDIO SIGNAL ROUTE
N CN3307 (C)
: C AUDIO SIGNAL ROUTE
N CN3305
F
CAUTION : FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
: The power supply is shown with the marked box. NO. 491005 FOR IC3102 MFD, BY
LITTELFUSE INC.
K
XV-EV61 53
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.17 MOD. AMP ASSY

A M MOD. AMP ASSY

(AWM7720/XV-EV61)
(AWM7787/XV-EV31)
To Fan

(FL)
(FL)
CN3022

(C)
L

(SL)

C
L CN3021

E
(FL)

(FL)

M
54 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

(FL)
: AUDIO SIGNAL ROUTE F

: The power supply is shown with the marked box.

M
XV-EV61 55
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.18 SP-TERMINAL and TRADE ASSYS

N SP-TERMINAL ASSY
(XWZ3737 / XV-EV61)
(XWZ3742 / XV-EV31)

STBY
STBY
STBY
(FL)

(FL)
CN3007

B (SW)
K
CN3006

(C)

(C) (SL)

STBY
C
K

STBY

(SL)

(C)

(SL)
D

: The power supply is shown with the marked box.

N
56 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

L TRADE ASSY
(XWZ3740 / XV-EV61)
(XWZ3745 / XV-EV31)
B

CN3011
CN3002

K
M

CN3012
(SL)

K
CN3001

(FL)

D
M

(C)
CN3013

(SL)
(FL)
K

E
(FL)
(C) : FL AUDIO SIGNAL ROUTE
(SL)
: SL AUDIO SIGNAL ROUTE
(C)
: C AUDIO SIGNAL ROUTE

L
XV-EV61 57
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.19 PRIMARY ASSY

E
J3009

1SS133
K

1SS133

P
58 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

P PRIMARY ASSY (XWZ3738)

B

E
REK1029

AC IN

• NOTE FOR FUSE REPLACEMENT

CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.
REPLACE WITH SAME TYPE AND RATINGS ONLY. F

P
XV-EV61 59
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3.20 SECONDARY ASSY

SECONDARY ASSY
Q (XWZ3739 / XV-EV61)
(XWZ3743 / XV-EV31)

Power Transformer
XV-EV61 : XTS3070
B XV-EV31 : XTS3071

Q
60 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

CN3003
C

K
D

To
J1 XDE3065
E 1/3

E
CAUTION : FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 491005 FOR IC31 AND IC41
MFD, BY LITTELFUSE INC.

CAUTION : FOR CONTINUED PROTECTION

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 491007 FOR IC21 AND IC22
MFD, BY LITTELFUSE INC.

CAUTION : FOR CONTINUED PROTECTION

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 491010 FOR IC11 AND IC12
MFD, BY LITTELFUSE INC. F

Q
XV-EV61 61
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

4. PCB CONNECTION DIAGRAM

4.1 LOAB ASSY
A
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
Transistor
B C E

B C E B C E SIDE A
Transistor
B B C E with resistor

D G S D G S
Field effect
D G S transistor
P.C.Board Chip Part SIDE B

Resistor array

3-terminal
regulator

SIDE A SIDE B

A LOAB ASSY
(VNP1910-A)

LOAB
(V+5D)

S101
V+3D

D 1 5 5 1
GND

LOAD+
VWG2426- VWG
CN602 C102 LOAD- CN602
PYKC F6
SW2

1 2 VNP1910- 2 1
C101
CN601
1 5 5 1

CN601

CN602 CN601 CN601 CN602

B CN103
M
LOADING
E MOTOR
ASSY

A A
62 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

4.2 FM/AM TUNER MODULE

SIDE A A

C FM/AM TUNER MODULE SIDE A

E CN5701 CN201
(ANP7338-B)
Q202

C FM/AM TUNER MODULE SIDE B

(ANP7338-B)
Q201 IC201 Q203 Q205 F
IC202 Q204

C C
XV-EV61 63
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

4.3 DVDM ASSY

A
SIDE A SIDE A

E SPINDLE STEPPING PICKUP ASSY

B DVDM ASSY CN5903 MOTOR MOTOR CN1013 A
CN601
CN901 CN105 CN104 CN101
UP SIDE UP SIDE BOTTOM SIDE BOTTOM SIDE
UP SIDE BOTTOM SIDE

IC421
B 30 1
CN101 C

CONTACT
IC601 30
30 1 12 1 B CN104 24
CN105 1

SIDE
1 4 1
2

CONTACT
24
Q726 CN901
D431

CONTACT
CN121
A

SIDE

SIDE
IC701 CN122 23
R451

CN921 1
R951

R962 R960
R963 R961
R983
R956
R958
R952
R954

CN103
5
C103
R981
Q451

Q951
C951

1 17
R953

R102

C112
R955
R957
R959

C921

CN103
C113
Q451 Q951 IC604 C451 C120
C116 R101
D432

Q911
R905
R904
R903
R902
R984

Q725 Q723
R982
C118 C114
Q911 R921 21
C452

R194

C221
1

1
R918 R191

IC101
C443 C902

R201 C231
7 1 Q925 V+5D
Q925
8 1
IC101
R433

CN124
CONTACT
IC901

SIDE
C431 Q926

R211
R931

C102
Q926
R401 C441 R444

IC201
R922

C101
IC901 IC201 7 5 14 GNDD
R901

1
8
C433

8
Q192

R192
Q721
L192
L191
L194
L193

R220 LD1 LD2

R907

C142
R906

Q192 R221 (650)

(780)

5
Q201 Q211 C901 R222
R933

22
R932

42
R934

IC461 Q201 Q211

R909

1 4 C222

C393 C390
L390 R392
R908

C139
R196

C133
IC431 IC411 IC431 R123 R223 R202 R212
C432 R199 C306 R391

Q202
R204

R214
D926

Q390

C212 Q212
Q390 Q724 Q722
R197

C
R124
C403 R390

RFOUT
C121

C132
D927

Q202 Q212 C434

D925

1 2 C394
C124
C126
C127
C128

R135
R400

C202
R203
Q193

R213
C130
R131
C134
CN123
R151

C404 C401
Q193 C302
IC301 B
IC441 IC301 IC441 C201
Q922 Q923
R925 R924
R926 R923

D923

C323
C442 C392
R410

E CN5904
3

C408 IC401
4

R310
R407

R443 C304
R389

Q923 Q930 IC401 R442

A 25 R301
R935

C211
1
R338 D928

C326 C300
R441 100
1
5

26

R409

CN904
R111
C151

Q922

(L111)
C407

R396
C335

R408
D401

D922

R342

Q928 Q929 Q401 R394

Q921 Q921 C391 R965

11
R964

X301
NP
C383
R300
R416

Q927 Q927 A Q927 C

C388
Q929

Q921 C491 C405 R403

R966
Q928 R384
Q401
R411 C409

Q401 Q929 Q928 C382

L402

D402
R402
C406

R383
50

C410 76
Q922 R382
51 75 C377

R385
R386
R379
R378
L361 75
IC401 R938 51
Q930

1
Q930 Q923 R939 10 2
R462 D R937 C301 R367
IC301 IC441 B C307 R936
R332
R361

R969
C461

C641 R620
L641

R967
C311 C312 C303

R968
C462 C354 R354
C310
C309

R333 9 1

11
C642 C318 C315 C308
C644

Q193 C463 R334 R363

C348 C342

CN301
R344
R346

R658
R369

R724

CN902
2 R461

R654

R364 R718
R365
R366
R657
R656
R655

R651 R653

R341 C652 C305

C634 R719 R722
R613 R612

D Q212 Q202 R336 R398 R368

CN609

C R337 R716 Q722 Q724

R397 C373
R652
1

Q722 Q724 Q390 C362 R715

R339
IC411

R696 C357
IC461

C651

UP SIDE
C690

IC411 IC431 R340

C702
C708

C681 C346
C694
16

IC461 C664
1
R675
R610

1
Q211 Q201
Q721
R721

104 53
CN902
C413 C414 C415
53
Q192
105

9
C621

IC201 IC901 52 C650

Q721 C412 R714
23

C648

C710 C709
R638
R609

Q926
R639
24

18
C607

C706

18

IC101
C411

C647
L421 D C619
C637

Q925 R647
C622 R637
UP SIDE
5

R648
Q723
Q725

Q911
L411

C630
R733

R626 R634
CN903
IC604
C421

IC604
R640

Q723 Q725 R636

11

C705
8
R644

C640 R628 R731 R723

Q951 Q451 R635
C731

C423 C623 R742

R741
R711
R744
C717
R717
R641

R712
C425

C636

R621

R713
C614

C424 C564
IC701 IC701
R734 C703

X601 R665
C707
1

C734
C649
2

R663
1
1

Q726
Q726 C422
CN923
C732

R662
C604

R732 R726
156

156 1 R619 C733 R725

IC421

CN903

IC601 R421 IC601 157 208 R611 C1562

E R562
R1084

IC421 R618 R561

C671 C684 R1081
R617 R1069 CONTACT
C659 SIDE
R2
D
R1082

1 29 R616 R1
23

F
CN608 24

C1563

R3
R1083

(L600) 2 30 C561
C660

R4
C600

CN607 C698
R600 C605
R603
R688
R689
R694
R695
R664

R606
R607
R608

R602 E 1/2
(ANP7463-B)
E
CN5905

B B
64 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

SIDE B SIDE B A

B DVDM ASSY
CN101 CN901
UP SIDE UP SIDE

11 23 UP SIDE

CN931
30 1 B
2 24
1

CONTACT
R1011 30

SIDE
CONTACT
30
SIDE
CN111
R1012 HEAT-RESISITANCE CN941 2 30

PRE-FLAX IC603
R1013

CN911
C232

17 1 1 29 R452

Q603 Q452
CONTACT
C135

C233 C230

D921

Q452
NORMAL SOLDER
SIDE CN112 C200 IC501
LEAD FREE SOLDER R210 R200

R453
(L210) R454

C210
R388
C205
C215

R109 R110
R190

CONTACT
1

R913
IC911 7 R915
Q541 IC602 IC911

R912
C913
R914
R193 Q551

C912
1 8

R911
R103 R106 R115 R118

SIDE
R104 R107 R116 R119 Q191 Q531
R144
CN114
C204
C203

R105 R108 R117 R120 8 14

Q191
R916

R160
R161
R100 C911
R125

(L100) R917
R431
C214

CN113
C125

R195 R162
C213

R198 C161 R432

R128
R127
R126

2 1

R156 R155
R154 C155
R159 R158
R157 C158
Q194
Q194
C402 C

C160
R143
R142

R165
R164

L401
R927
R928
R929
R930
R328
R329

R152
Q924 R153
R305 R306 Q924
D924

C152
26
13 1 IC151
R303 R304 IC151
R387

R163
R405
R395
R330 R406
R393 R399 R331
14 27 25 D403
R343
R345
C381

R183
C182
C355

R380
R182
R381

DVDM ASSY
C181
R181
C
A
B

R355

R362
IC151
R376 R370 AWM7 0 0 0
0 1 2 3 4 5 6 7 8 9

R373 R375
1 1 1 Q924
R166 R168

R169 R170

C172
R413

R412
R360

R661 R649

R374 C163
R414

2 2 2
CN902

R172 C176
R179

R176 R178
R171
C171

3 3 3
R180
C177
R177

R175
R659
R660

R173
R167 C167 C174 4 4 4
R415

R174
R666

5 5 5 Q194 D
6 6 6
R650
R605

C638 C635 C602

7 7 7
R743
0 1 2 3

C629 C627
1
1

C701 C620 8 8 8
R623
(L623)
0
0

R1051
C1051

R701
9 9 9
C632

C633

C631

C628 R642
Q191
R614
R615

R1050
1
R1056 27 1 R1623 Q531
C1052 R1062 Q551
R1057 R1063 R9531 Q531
R1052 C531 Q541 IC911 IC602
R1058 R702 R9551 Q551
CN903

C1053 R1064 R531 C704 IC602

R1059 R9541 Q541
R1053 C551
C1054 R1065 R551
R1060 R624
R532

R1054 C541
C1055 R1061 R1066 R541 C624
R627

R1055 IC501
15

28
14

R533 R417
C1056 54 R631 R625 Q452 Q603
R552
IC501

R553 R622 C625 C626 R422

R542 Q603 48 C643 C639
25
R629

R1049 R543 C603 IC603

R601

IC603
R972 R522
R523
R973
ICT FC
C565

R974 R604
C571 R502
D603
R630 C903
R633 R632

R503
R571 E
R970

R976
R975
R971

R690

R513
1

C562
28

C563 C521
R512

R521
Q977 Q521
R572

C501
R501 Q501
R977

R9521 Q521
C511
Q977

R9501 Q501 1 24
Q511
R646

R645
R643

R511
R9511 Q511

(ANP7463-B)

B B
XV-EV61 65
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

4.4 IF/AF ASSY

A SIDE A

E IF/AF ASSY IC8301

Q8771 IC5501 IC5591 IC5801 Q5402 IC8201 Q8201

DECK MECHA. K CN3001 K J3002

CN5503 CN8303 CN8302
B
W332
CN8302
SPDIF
W350 W352
IC

W349

VPR+8
XTUNER CN8303 VA+5
1

GNDMDVD
1 11 1
11
1
30
B KN5502
GNDD

CONTACT
1 2 10 15

W326
10 SIDE 1 10 15

W355
CONTACT
30 1
SIDE

W336
CN5503 FOR

W335
W331

W334
W333
22
D
W323

MUTE

C5608
BINDER
C5610
VM+12 W330 GNDA
R5802

W339
GNDU
W324

VE+56
W325

W308
D5711

W329

VA-12
W354
R5807
W328 VA+12

VA+12TX
VA+12

VA-12
W300
R5804 W294 VD+5
GNDU

C8829
GNDU
W287 W299
VA-12
W327
C5716

XAUXMUTE
VA+12
W293
C8910
W286 W295 SW W303
LVLSHIFT C5502
CENTRE W302

C8310
W285

RECL
C8312

C8309
DVDMUTE
L5501

C5506
W301 VD+5

W296
C5501

D5502

XAUXMUTE

FL
CONTACT

ATT6 W305

C8308
W298

C8834
W359
C8833
W288
SIDE

CONTACT
C5511

W297 W304
SIDE
W291
W292
W290

VA+12
W289

W283 W265

W306

W307
7

GNDU
XPROT

W363
W256

W253
7

W267 GNDA

W357
12

C
CN5502

SYSPOW W264 RECR

12

W254

C8201
W260
W263 Q5402

1
RECL
10

C8307
CN5501

1
IC8301
1 1

W255 W258 W262 FR FL

CN5501

W261 C5433

W270
W269
W225
GNDA
PRODUCTION CODE SL

W223
W257 W268

C8305
5

RECR
5

W224

W226

W227
W358 ECHOCTRL1
W259
1 1

ECHOCTRL1
X5501

W215 MICGND

D8201
CN5105
LCDDAT
LCDCLK

W208
SCLK
SDATA

MDATA

W222 VOCALC
GNDU
I CN5101

W211

W212

W214

W217
W213

W218

VOCALA

C8221
W221

R8216
VOCALB
W220
W210

W219
W209
VDET

LEVELIN
IC5501 GNDA

L8201
Q8201
IFAF ASSY

W198
C8222
R5636

R5637

C8631
IC8201
GNDU
W196

D
D5955
W166

R8637
C8213
DVDPOWER

DTSMIX
IC5591

SWMIX
ATT10
W194

W197

KCONCLK
W147

VA+12

W195
VD+5
KCONSTB

W180

R8638
SYS CS2

GNDU
GNDD

W140
VE+5
W161

W167

W199
W157

W159

W163

W165
W155

W174

SERVICE

W183
W148

W149

W151

W153
DVDPOWER

TCMSIN
W168

C8632
XDVDRST

W171

W122
W169

W139
SYS CS1

W170
W111

W175
W172

W173

W123

W184
W138
TEST
VD+5

W137
W154

W160

W162
W158

W164
W156

INPUTSELA
W179
W152

TCMODE

ATT10
W114

W115

W116

TCHALF
TCRECF

Q8771
TCRECR
W143

W144

DVDACK

ST/TUNE

W102
TCPULSE
W145
DVDMUTE
W141

1
W146

W150
XVMUTE
W142
W108

GNDU
PRINTED SIDE

W106

W181
VDET

LVLSHIFT

E
W182
2SD2012

OPEN
W178

C5966 GNDD C
17 1
17 SIDE 11 1 1
W177

1
W176

W101 C5968 W112 CN5801

E C8773 W104 B W110 GNDMDVD W117
W121
VA+12

VDVD+12 W107 W113

W120 CN5904
W103
W105 W109 GNDD CONTACT
SIDE
A CONTACT
SIDE
CN5903 30 1 W119
C8771

C5963
D IC5801 FOR
W118
BINDER
30 1

CN5904
CN5903 CN5105 CN5801

B CN901 J J5401 D CN2506 B CN902

E
66 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 2
W182 R8638 D8201
R8637 W269

VA+5
ST/TUNE

FL
W123 W308
L8201 W226 C8833 VA-12
ATT10 W183
C8307 W359

CN5904
INPUTSELA C8631 R8216 W227 FL
W184

N5904
C8829

GNDA

11
C8632 W270 C8834

CN902
INPUTSELB W185 W360
W186 D8601
C5804

ICT
FR

SIDE
W124 W271

IC8801
D8602

CONTACT
W230
W229
DVDR W187 C8835

1
W200
IC8801

CENTRE
W231 W361

W228
C

W232

18
C5803 C8831
W233
5

W125
SW

VA+12

C8836
DVDL

SIDE
OPEN

W272
W234

IC8624
W188

W310
IC8624

IC8602
W341

CN5905
V
W309

W340
IC8602

C8621

C
W128
C8622

GNDV
C8737

W362
FC
W201

W126
W273
19 19

W127
C8620

CN5905
W343
W344

B CN903
W342
W235 C8619 C8728

18
C8617

IC8702
W202
IC8702

13
1
W203 W204 W236 VUA+12
VA-12

Downloaded from www.Manualslib.com 5manuals search engine

W130

W129
W205

CN5507
W237 VUA-12

C8618
GNDA W274 W275
C8603

CN5701
VA+12 C8616
W189 C8615 W238

C8722

SIDE

10
W276

CONTACT
W351

IC8601
1

VA-12

W312
D8902

W311
W277

CN5701
IC8601

13
D8901
1

GNDDSP
1

C CN201
1
R8901 W345
F

D5703 GNDTX W132 C8604

W131
C8715 W239 R8904 C8721 C8752

C8751
19 19

VA+12TX W133 W346

6
6

GNDU

C5717 W240

IC8703
W190 GNDA C8908
IC8703

VA-12

C8907
W347

TXL C8716 W241

W313
GNDA

C5715
FLO
W134

SR
W242
FR
FL

FRO
W316
W317

W206 W243
CN5506

GNDA

C8711 SRO
C8712
D5715 R5712 W244
W314
W315

DNMIXL

DNMIXR

C8702 SLO
CN5510

W318

W245
L5701
TXL
W246
1

W319
1

BINDER
DNMIXR

FOR C
1

W278

IC8701
W247

IC5701
(1 RED 2 BLACK)

C8701 AUXL
IC8701

IC8101 W279
1
F

C5719

XV-EV61
W353
SIDE
OPEN

W248 DNMIXL ATT6

IC5701 IC8101

C8121
13

W280

W249
C8122

W135
13

W250 PBL
C5709 TXR VA+12
W281

W191 C5718 GNDA VA-12 W282

W321
FOR

C5640

CN5505

W207
GNDU W251
BINDER

W322

X5701
C5901 C8119

7
7

W136
W348

HPAC1

C8510
B

W252
1

JA5903
C5902 C8509 C8120
1
1

C5711
C5632
IC8111

AUX IN AUX OUT

IC8111

F
A

C
CN5902
SIDE
OPEN

CN8401

CONTACT
5501

UPPER
1 7
SIDE
CN5507 CN8011 CN5506 CN8007 CN5505 CN8003

C8115 C8116
1 7

(XNP3071-B)
DVD
CN5902
8

8
Download

E
SIDE A

67
E
A

D
C

F
B
 G 1.GNDB
11.GNDMTC 12.VP+15 C8206 R8207 8.GNDA
8

13.V+5A 14.VD+5 R8204 C8218

C8209
IC8201

R8205 9.DVDL
15.GNDDSP C8205 TCRECF
C8217 10.GNDA
28
28

C8208 R8203
1
1

C8203
C8306 R8206 11.DVDR
IC8201 C8207 C8204 C8216 TCMODE

1
C8202
GNDU R8202 C8215
GNDA 1.VSEL1
VA+5

R8201 C8214 TCHALF

Q8201

R8307
XWZ3726 2.VSEL2
FR

CN5904
Q8201

R8306 R8215 ST/TUNE 3.SQUEEZE

XWZ3732 VA-12
FL

D8201 4.LETTER
C8316
Q8623 Q8624

ATT10 5.ASPECT
XWZ3733
C8630
Q8624

CN5904
R8634 INPUTSELA 6.P/XI
FL
XWZ3735 C8626
IC8801

11
8.CY/G 7.RGB
Q8626

R8801 C8628 INPUTSELB

C8828 10.CB/B 9.GNDV

Q8626
GNDA

R8802 R8636
IC8801 D8601 R5808 12.CR/R 11.GNDV
Q8625

FR
C8629
D8602 14.C 13.GNDV

Q8625
Q8623 C5806
5

C8803
CENTRE

16.V 15.GNDV
IFAF ASSY

C8624

R8803
VA+12 R8623
18.Y 17.GNDV
DVDR
R8816

C8623
4

4
C
11
8

VA-12 R5809 13.TXCE

7
R8631
SW

12.TXIDATA
Q8745

C5805

CN5905
R8805 11.TXCLK
Q8745

8
C8830 R8804
VA+12

10.TXODATA
R8747

R8633 DVDL
9.TXR

CN5905
IC8624
IC8602

8.GNDTX
C8625

14

1
7.TXL
CN5507
Q8743

C8627
4

5
R8749 IC8624 6.TXMUTE
Q8743

R8635

GNDV
R8745 IC8602 5.ST/TUNE
19

C8727

V
4.TUNE
Q8622

R8624

C
Q8622
3.V+10
Q8621

R8741 R8735 R8619 R8632

1

2.RDS
C8765

R8743 R8617 R8627 R8630

IC8702

R8762 R8733 R8628 1.N.C.

R8621

R8730 Q8621 R8611 R8629

18
19.MUTEOUT

R8763 C8729 R8625 R8626

R8732 C8611
R8729 C5706
CN5507

R8728
4

R8609
5

R8622

13
R8731 C8607 VA-12 R8620
C8733

R8726 C8601 R5710

18.XDSPMUTE C8726 R8601 R8607 R8618

CN5701
Q8762

17.MODC C8731 VA+12 R5714 C5705

16.DECMUTE C8724
Q8762

R5713
14.DSPDO 15.DSPDI R8724 R8615
13.DSPCK R8722 C8735 VA-12 R5706
12.DSPRST C8613
10.BUSY 11.DSPSS R8737 GNDA VA+12 R5709 R5707
R8727 R8613
Q8744

R8739 R5708

C8614
8.DSPMODE 9.DSPHREQ R5703

8
C8609 C8612 R8612

IC8601
IC8601

VM+12 R8721 C8605 C8610 R8614 R5705

Q8744 R8725
R8605
VA-12

6.DIRCS 7.DIRDO

CN5701
Q5701

4.DIRERR 5.DIRRST R8603 C8608 R8610 R5704

C8725 D8902
1

C8764

5
3.XTLO C8723 D8901 C8606 R8608 D5703

1
1.GNDD 2.LSSN GNDDSP R8723 R8606 R8604 Q5701
C8763 C8602
3

3
R8616 GNDTX
GNDU
19

19.SBLO
5

18.GNDA 4 R8719 VA+12TX

GNDU

R5715

C5712
17.SBRO

SL
R8602 R8720 R8717 D5716
16.GNDA
VA-12
Q8720

GNDA

15.CO TXL
GNDA R8718

1
8
14.GNDA R8715 R5702
CN5506

FLO
Q8719
IC8703

13.SWO

R5716
Q8720 C5720
R5720
FR

IC8703
FL
12.GNDA C5707

SR
FRO
11.SLO R8752 C8706 Q8719 C5708
CN5506
R5631

10.GNDA R8753 R8754 C8754 SRO R8712 C5704

R8751 R8716
9.SRO R8756 C8758

XV-EV61
R5701

DNMIXR
C8759

DNMIXL
8.RECMUTE C8757 C8760 C8714 C8713 D5715 R5711
SLO

TXL
C8753 R8759 R8713
7.FLO
C8761 C8762 R8760
6.VCOMG R8755 R8757 R8758 C8101 C8103 C8705

8
1

8
IC8701
IC8701

5.FRO

GNDA
DNMIXR R8705

R8127
IC8101

R8714
Q8115 Q8111

4.GNDA

16
R8126
Q8114

R8118 R8703
R5616

11

16
3.LIN 1 R8704
R8115

IC5701

IC5701
2.GNDA C8704 R8701

5
Q8111 AUXL IC8101
1.RIN Q8114 R8120 R8702
Q8116

C5639

16
R8119

1
DNMIXL

16
ATT6 R8117 R8709
CN5505 Q8115
Q8116

13
PBL R8711

9
R8706 TXR
C8707 C5714
Q8501 Q8113

R8518 R8116 R8708

VA+12
Q8503

R8122
R8707

Q8113
R8405 C8404 C8708
D8501
Q8502

VA-12 C8709
Q8112

C8405 R8406
CN5505

C5713
Q8503 R8514 C8703 GNDU
R8121 C8406

R8114
2

2
manuals search engine
Q8502 R8512 C8403 R8411 R8710 R5906
R8111
IF/AF ASSY

Q8112

Q8501
R8516 C8401 C8402 C8710 R5905

R8112
R5902

HPAC1
R8113 C8516 R5901 C5906 C
13.GNDD
C5903 L5901
12.V+5A L5903 C5710

R8108
11.GNDA

C8108
R8403

D5901
10.GNDA R8513

1
9.VD+5

6.GNDD
R8404

5.VD+5
R8107 C5631

2.RXD
11

7.N.C.

4.CTS
3.RTS

1.TXD
8
8.VD+5

C8107
R8124 R8402
7.GNDD R8125
C8117 C8118 R5909

L
R8517

C
6.GNDD

V
R8105 R8106 R5908

5
5.N.C. R8103 R5910 R5907

R8401
AUX OUT
IC8111
4.GNDD1

C8513
L5902

L
C8518
IC8111

R
3.AC3IN

CN5902
R5903
R8104

R
R8511

AUX IN
2.GNDU
R8515

C8514
1.N.C.
C8517 R5904 C5904 7 1

Downloaded from www.Manualslib.com

CN5902
E
1

1
SIDE B

E
68
C

D
A

F
 B

F
C

D
A

69
SIDE B

E
CN5502

(XNP3071-B)

8
8

Q5802

R5563 R5604
Q5802 R5719 R5603
GNDD
R5544 R5541 R5539
R5561
4.XRESET

R5562 R5515

C8772
R5542 R5540
3.F_CLK

R5801 R5568 R5556

5.VE+56
6.GNDU

1.F_E/D

GNDD
R5560
2.F.DO

R5547

C5965
7.N.C.

R5574 R5569 R5559 R5590

Q5805

R5551
R5575 R5570 R5555
CN5503

D5801
Q5805 R5718 R5572 R5558 R5549
1. GNDM

R5576 R5571 R5554

2. SOL

R5573 R5557 R5632 C5964

Q5801

R5717
Q5711

R5605
Q5801

Q5711 R5615
Q5803

C5967
Q5803

R8772
CN5503

SYSPOW
4. PULSE

DVDMUTE
5. HALF

VP+15
3. N.C.

LVLSHIFT
R5805
VA+12

C5535
VM+12

DVDPOWER
CN5502

R5968
IC5501

R5577 81 8
80 80

VDVD+12
1
GNDU

IC R5969
55
7. GNDM
6. MODE

R5578
8. VD+5V

XAUXMUTE

01
9. RECF

R5553
10

R5806 7 R5579

GNDU
VE+5
1
R5614 R5506 R5552

Q8771
R5595
Q5804

R8771
Q8771

10.MOTOR
11.RECR

R5816 R5611 R5550

Q5501 Q5804

11

C5508 10
R5815 R5612 10
0
R5814 VD+5 R5501 R5613
C5505

D5952 0
R5548
R5813 R5502

C5969
R5503 R5510 51
1 R5633

30
C5520
D5711 Q5501 1 51 DVDMUTE
GNDU R5512 R5634 R5546
7

7
R5507
R5609 R5509 50 R5545
C5962

R5582 R5511 50 R5567

Q5607

Q5607 R5543 VDET

R5513

L5502
C5509 R5597
R5594 R5598
R5967 R5593 R5565

C5519

CN5903
R5586 R5621 R5564
R5607 30 30 SYS CS1
C5507 C5516 31 31

R5529
R5585 C5514 C5513 C5515 VDET

GNDMDVD
R5638
R5530

CN5903
R5583 R5516 R5601 DVDPOWER
R5592

C5518
GNDU

XV-EV61
GNDMDVD R5521
Q5502

R5608 R5504 XPROT R5588 SYS CS2

GNDD
R5531
R5584 R5523
R5610 Q5502 R5524
30

R5520 R5517 XDVDRST

R5538
R5527
VE+56 R5960 R5528 R5532 10.GNDD
R5505
CN8303
Q5503

VDET

C5592
11.DVDACK

R5962
D5502 R5537 R5591 1.CTS 12.MDATA
C5517 2.RTS
R5961 R5518 R5534 13.SDATA
Q5503 R5522 3.RXD
MUTE

R5519 R5525 14.SCLK

CN5501 R5535 4.TXD

R5639
DVDACK
VA+12

12 10

16
GNDA

C5504 R5526 15.SYSCS2

VA-12
VD+5

11

16
16.SYSCS1

1
SDATA R5536 XVMUTE 17.XDVDRST
R5581 5.DVDWKUP
XTUNER

18.DVDPOWER 24.GNDM
R5533 6.DVDMUTE

R5635
CN8303

MDATA 19.GNDD 25.GNDM

VD+5 7.TRKUP 20.GNDD 26.VPR+8M
IC5591

8.VDET 21.AC3 27.VPR+8M

R5580 1 SCLK
9.GNDD
R5803 22.GNDD 28.VPR+8

CN5501

9
29.VPR+8
D8702

R5508 23.GNDD

C5599
SR ECHOCTRL1 IC5591 30.VDVD+12

16
11

16
C5801
6

6
C5591
D8701

XAUXMUTE
LCDCLK R5885 R5886

ECHOCTRL1
IC5801

30.GNDU

IC5801
ATT6
29.VE+56

11.LCDDATA
LCDDAT LVLSHIFT

10.GNDLED

12.LCDCLK
28.LVLSHIFT

8.KEY2
9.KEY1
27.GNDHP
R5887

9
17
26.MUTEC C8301 R5964 ATT10
25.RYR C8303

SW
C5961

C5802
LEVELIN
1.TIMERLED
C8302

VA-12

CENTRE
24.RYF

R5888
2.REMCON
R5963

VPR+8
Q5808

VD+5
GNDU

GNDU

3.GNDU
4.VP+15
23.MUTE

5.GNDU

7.KEY3
6.VE+5

CN5801
22.HPAC1
1
Q5807

DTSMIX

R5889
21.SYSPOW
Q5808

MICGND
20.EMUTE

VOCALC

VOCALA

VOCALB
SL
SWMIX

RECR
17.XHPMUTE 18.EDATA 19.ECLK Q5807

Downloaded from www.Manualslib.com 5manuals search engine

15.SUBAC 16.HPDET 17.RECL
D5954
VPR+8 14.XTUNER RECL R5965 KCONCLK 16.PBL

CN5801
1.ECHOVOL
C5960

VD+5
11.FR 12.GNDA 13.XPROT 15.GNDA

2.VA+12
7.SW 8.GNDA 9.FL 10.GNDA R5514 KCONSTB R5811 14.PBR

VA+12
1

R5812
4.GNDA 5.SR 6.GNDA 13.RECR

3.MIC
1.C 2.GNDA 3.SL R5431 R8301

4.MIC SW
R8303 D5955
R5432 R8302

GNDA
VA+12

1
R5434

RECR
5.GNDMIC
C8223 R5966
VA+12TX C8313 TCMSIN 12.XPBMUTE
R8308 R8304 11.DOLBY
C8212

VA+12
D
VA-12 R8305 VD+5 10.RECMUTE

CN8302

G
D

S
C8315 9.PB/XREC

15

14
15

14
Q5402 R8214 8.XBEATCUT

S
CN8302
1.VA+12 VA+12

SPDIF
C8912
GNDU 1.GNDD 7.BIAS

16
5

2.V+12TX

11

16
3.VA-12 C8211 GNDD 2.C 6.GNDD

C8304
R8213 3.GNDD 5.VA+12
IC8301 4.VPR+8 C8220 R8211
R8212 R8210 4.V 4.VA+12
6.GNDD 5.VPR+8 RECL R8209 TCPULSE

IC8301
5.GNDD 3.MS
8.VPR+8M 7.GNDD
R8208 6.Y 2.VB+12
10.GNDMDVD 9.VPR+8M C8210 R8217 C8219 TCRECR 7.GNDD 1.GNDB
11.GNDMTC 12.VP+15 C8206 R8207 8.GNDA

9
13.V+5A 14.VD+5 R8204 C8218
C8209

IC8201
R8205 9.DVDL
15.GNDDSP C8205 TCRECF
C8217 10.GNDA

28
28
C8208 R8203

1
1
C8203
C8306 R8206 11.DVDR
IC8201 C8207 C8204 C8216 TCMODE

1
C8202
GNDU R8202 C8215
GNDA 1.VSEL1

VA+5
R8201 C8214 TCHALF

201
R8307
XWZ3726 2.VSEL2

FR

4
1
 F
E
B
A

D
C

70
F
IC8503
SIDE A

IC8901
IC8902
IC8501
IC8601
IC8301

IC8101 Q8503
IC8602

1
1

IC8603

IC8701
IC8201
IC8502

IC8401 Q8501
IC8702 Q8504
Q8341
F
C8111 L8102

A
R8005

B
R8014 C8115
L8005 R8013 R8108 C8114 H C T-163
C8106 R8012 94V-0 FC ICT

22
KN8501
R8106 32 17 IC8603

23
L8101 C8110

I
C8104 C8109 R8606
C8554
L8104 C8550

GCH
R8112 R8601

14
L8103 L8601 C8551

C8609
C8613

Downloaded from www.Manualslib.com

C8610
R8008 R8007

J
C8005

1
1
C8006

14

IC8901
R8011

1
7 C8601
C8602
C8603
C8604

A
R8019

L8603
C8220

R8605
R8228

IC8601

OUT
1
R8104

CN8016
CN8015
C8547

1
44
C8012

GND
1 16

1
R8105
C8537

7
7
8
8
44

IN
R8116

G
C8536 C8527
L8004 C8533
R8530
IC8101 C8526

B
C8011

C8511
GNDD

R8557
R8004 C8208
C8548 R8540 R8541

19
I

R8556
R8511
R8512
R8513
R8514
C8203

9
C8532

C8530
C8528
108
R8233 108

OUT
R8201 R8115
7373 L8504

IC8501
R8608
J

R8805
109
R8224

R8810
72
72

GND
R8114

F
109
C8204

R8336
R8333
R8332
R8337
R8346

IN
R8202 C8205

17
R8113 R8802
C8524

IC8902 8 5

CN8003
C8206 8

17
C8503

H
L8002 R8234 R8220
5
C8207 R8502

13 15
R8002 C8224

manuals search engine

2
2

C8525

R8501

R8803
C8541
R8212

R8804
R8401 R8503
R8402 Q8503 1 4
R8533 C8543 1
R8001 L8003 R8403 R8221
L8001 R8003 C8409 R8538 R8534

Q8501
C8545
R8539
IC8502
4.5 DSP ASSY (XV-EV61 Only)

C8410 C8903 C8211 R8524

CN8012

1
X8501

C8411 R8006 R8552

D8303
C8412

R8531
L8401 C8008 C8216 R8553

D8402
E
C8413
C8522

R8334
C8414

GDAC
R8551

D8502
C8010

R8550
C8549

CN8011 CN8013 CN8014

11

C8416

11
10
C8523 C8515

C8516

CN8011
L8505

144

10
R8407 C8553

144
11

D8503
C8552
37
37
C8512

IC8701
R8338 1 36

1
JTAG

C8505

R8554
R8415 C8402 R8547 1 36

1
G

C8403 R8548
C8507
C8509

R8417

1
1

20
H

R8549 C8546

GNDD
R8806 C8401
C8513 CN8018

CN5507
R8506
C8504

CN8007
R8807 C8009 R8521
DSP ASSY(XV-EV61_Only)

C8702 C8703

8
8

1
R8522
R8558

19
C8701

XV-EV61
IC8503

15
1 4
R8519

GNDD
R8340

4
5
C8417 C8007
11
11

C8415
C8501 C8418
C8422
E R8329
R8335

R8341
F

C8502 R8544 C8420

R8532 R8542 D8301 15 R8413

19
D8302
R8546
L8402
R8543

R8018 R8343
8 8
R8703

R8536 L8501
C8302
C8301

R8545 R8412 R8416 C8421 C8419 11

R8702
R8331 R8701
R8330 R8704

12
R8344 R8322
CN8019

22
22 12
22

R8339

E
L8301
23

R8321 R8308
23
22

11
11

C
R8320 R8414
6
1

10
10 11
L8701 R8411
IC8301
Q8341

1
IC8401

CN8007
R8406
Q8504

1
6

R8526 R8410 9 16 L8702

IC8702

3
3

C8555
CN8008 CN8010
CN8007 CN8009

R8505 C8517 9 16
R8808 11
R8527 R8409
11 20
R8345

R8405

R8809 R8504 R8507 R8408 D8501 20

C
L8801 R8555 R8520
R8508 R8518
11

CN5506
R8328
C8423
C8407

44
E

R8509 R8517
3333

C8514
D8401
C8706 C8705

R8510 R8516 34
34 44

CN8011
C8404
R8515
C

C8544
1

R8523 R8404 R8216 C8225

C8408

R8309 C8405 L8202 R8211

C8704

C8542 V11 C8518 C8520 C8213

R8310 R8223
R8017
B

C8521
1

C8540 R8311
1

24
R8528 R8312 24 C8212 13
13

GNDD
R8016 R8222
15

R8313
25
25
12

C8406
12
D

R8529
R8207

C8539 R8314
L8203

C8538 R8326 R8219 L8205

17
A
C8209 R8210

V3

PRODUCTION CODE
C8529
13
X8201
R8204

C8534 6
E
R8225
R8209
R8215
R8214
R8213

C8535 R8537 R8206 R8205

C8210
1 IC8201

L8502

19
R8603
9
10

C8904
36
36

CN8003

L8602 C8531 L8204

B

17
R8801 48
R8203

C8215 37 48 R8230
37 C8201

17
16
R8812 C8214

16
10

C8221
C8222
R8231

C8901

R8811
CN8017

1
AWX8250
R8813
L8201
R8229
C8226

C8202

AWX1083
AWX1082
D

R8602
R8708
R8706
R8707
R8705

C8217
C8223

IC8602
CN5505

R8232
C

R8227
C8219
C8113

C8014 C8001 C8902

CN8002 CN8005
CN8001 CN8004
CN8003 CN8006

R8009

AWX
C8013
1

C8002 R8010
R8226
C8218

C8108

JA8101
R8103
C8112
R8109
R8111

7
AWX8241
R8015 C8004
R8102
R8107
C8107

JA8103
R8110

C8003

4
4

KN8102

AWX8252
AWX8251
C8606 C8105 JA8102 KN8201
C8605 2 3
C8608

AWX8240
C8607

32
32
1

(ANP2022-B)
KN8101

AWX8254
AWX8239 AWX8255 AWX8253 1
SIDE B
(ANP2022-B)

F
SIDE A
 5 6 7 8

4.6 MIC ASSY

SIDE A SIDE A A

J MIC ASSY

C5432
E CN5105 VR5401

W417

1
C5416 C5420
C5422

IC5402
B

2
IC5401
1

C5410 W419
1

C5421
C5431
J5401
J5401

JA5402

W420
JA5401

C5413
D5401

3 3

C5426
5

5 5
R5401

C5401
4 4
1 1
C5409

W418
W454
W356
R5411
L5401

MIC ASSY
C
(XNP3071-B)
IC5401 IC5402

SIDE B
C5434
C5411
R5409
R5408
C5407 R5407
D
R5412

Q5403
C5429 MIC ASSY R5425
R5435

R5423
R5427 C5402 C5430 C5427 R5416
R5410

C5403
IC5401

R5402
1
1
D5401

C5404
5
5

C5406
R5422

5.GNDA
4

R5405
C5405
5

3
J5401

4.MICSW
J5401

16
16

3.MIC R5403 C5428

1

R5429
R5404
2.VA+12 R5419 R5418
Q5401
1

4 IC5402

1.ECHOVOL R5426
A

C5412
8

C5408
R5430
R5417
C5415
R5414
C5414
R5415

C5436

R5406 XWZ3734
R5421
C5423
C5425
C5424

R5420

XWZ3730 R5413
C5419 E
(XNP3071-B)
Q5403 IC5401 Q5401 IC5402

J J
XV-EV61 71
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 F
E
B
A

D
C

72
D
SIDE A

1
1

DECK MECHA D

Downloaded from www.Manualslib.com

4.7 DECK ASSY

DECK ASSY

CN2302
BIG

manuals search engine

2
2

DECK TP DECK ASSY CMKS-P3X BIAS Adj.

REC LEVEL Adj. C2405 C2421
3 1 A
C2209 W263 1 2
R L DI P OPEN
3

1
1 C2217 Lch 1 2

2
CN2302

CN2507 C2403 L2401

C2407

L2403

VREF
C2207

4
C2203

3
VA12 C2417
W259

SIDE
C2409 C2810

VR2401

F2201
W261 VA12 IC2401

PRINTED
C2419 C2808

C2205

W253
Lch

C2215
RCH LCH W260 VREF

W247
W248

W246
1
L2402

W249
Q2806

5
IC2201

2
C2218 C2420 C2809
C2425

4
W254
W255
W256
W257

VREF
GNDA
VREF

3
C2410

W250
VR2801

W258

VR2402

F2202
PRINTED
SIDE
C2418
W242 W262

W252
W234
C2210 W237 C2422

W251
C2262 Rch 6 4

W243
W241

C2251
GNDA C2408
D2303

C2404

C2204
C2406
L2801

XV-EV61
IC2202 BIG Lch GNDA
VR2802

L2404

VA12
D2305

C2201
OPEN

C2311 Rch 1 3
D2256

C2208
C2261 W236 C2307
4

PRINTED SIDE

VR2301
C2309

D2201
D2301

GNDA

C2206

C2216
Q2301

W240

MS
W235 VA12
C2255

VA12
VREF
Q2802

W233
C2804
C2805

W238
W239

C2254
W244
1

R2321
C2314

C2801
Q2302
1

W224

IC2301

W231
W221

VA12

GNDA
W232
D2302

W230
D2304

CN2301

W227

W219
GNDA
C2308 D2306

W220

GNDA
W218
ICT FC

C2202
C2310
C2806

VR2302

3
3

W223
C2312
C2802

C2807

W228
Q2801

C2803
Q2805

Rch

XNP3061-B
W222
CN2506

PBL
PBR
RECR
17 1
1 17

W225
W229
Q2803

MS
VB+12

XPBMUTE
DOL ON\OFF
PB/XREC
XBEATCUT
BIAS
DGND
VA+12

17.RECL
15.GNDA
R2805
R2806
R2803
L2802

1.GNDB

10.RECMUTE
5.VA+12
CONTACT SIDE PB LEVEL Adj. Production Code

CN2506 CN2301
IC2202 IC2201 VR2401 IC2401 Q2301 VR2801 Q2806
IC2301 VR2802
VR2402 Q2805 Q2302
VR2301 Q2803 Q2802
VR2302 Q2801

(XNP3061-B)
E CN5801 DECK MECHA

4
4
 5 6 7 8

SIDE B A

BIG

5182R
L2801
R2898

Q2806
Q2806
R2801 R2802

VR2802
L2802

CN2302
6182R

VR2801

BIAS
Q2801 Q2802

VR2801
VR2801
Q2801
Q2802

CN2302
B

3182R
R2814

Adj.
VREF
D2303

D2302
D2304 R2424 R2899
R9005

CN2301

3242R
CN2301
D2301

L
R

1032R

3242C
4242C
1

6242R

5242R
2032C

L2402

L2401
Q2803 Q2804 Q2805

C2301
Q2803

VREF
Q2301
Q2302
Q2455

2032R
Q2456

R2456 R2455

5542Q
6542Q
D2305
E

C2401
8082R 7082R

Q2804
R2432 R2431
Q2302

D2306

9932R
Q2301
C2432

8
1

3142R
IC2401

4142R
Q2303
Q2304

1042CI
4032Q

3032Q
R2412

5
2042C
1182R

4
Q2805 7032D
R2303

1342C
1142R
C2303
R2418

3 2 1 0
R2410 R2409
9082R

0
0
R2810 C2315 R2416 R2417
R2304

L2403

1
1
L2404

9142R
C2322 C2304
1232C

9 8 7 6 5 4 3 2 1 0
R2415
C2324
C
XNP3061-A

9942R
0242R
IC2201 Q2306

4
6032R

R2305
R2307
R2309 8942R
2132R

1542R
2542R
R2308
1
1
1032CI
8

2242R
Q2401
Q2302

R2421
R2310
5032Q
2042Q
Q2305

3232C

1042Q
1132R

C
B
A
Q2306 C2451
1042D
GNDA

REC LEVEL
1542Q
2542Q

VA12

8032D
Q2451
Q2452 Q2351 Q2353 Q2352

VREF
VA12

3042R
VREF

R2404
VR2401

R2352
R

R2320
1532Q

R2319
VR2402
PB LEVEL Adj.
VR2401
VR2402

1042R
1142C
Adj.
VR2301

C2412
VR2302
VR2301

3532Q

2042R
BIG
R

VA12

TP1 CMKS-P3X
TP2
VREF

R9008
GNDA

VR2302
3122R
2532Q

C2452
R2453
R2351 D
GNDA
VA12
3542Q
Q2460
Q2453

XWX3067
XWX3066

0642Q

8
9

8
4542Q

1022CI
IC2201
Q2454

1.GNDB 1122R C2230

2.VB+12
3.MS
0122R

4.VA+12 GNDA
1

GNDA
61

5.VA+12
61

6.DGND
5522Q
Q2252

1322C

7.BIAS D2201 VREF

1922R
4522Q
Q2254

C2212 C2211
6722R
8.XBEATCUT
9.PB/XREC 7722R Q2253
Q2253

10.RMUTE MS
11.DOL ON C2252
12.XPBMUTE R2254
1522Q

R2253
13.RECR
14.PBR
Q2251
Q2252

D2256

15.GNDA R2251
R2272 R2255
16.PBL
2522D

VA12
17.RECL R2252
2522Q
3722R

6522R
0722R

D2255
6009R

R2206
4022R

C2253 E
8022R
7022R

R2268 R2257 R2203

C2256
1

R2269
C2257 R2265
IC2202

4
CN2506

F2201
2022CI

F2202

1022R

GNDA
6622R
CN2506

1722R
7622R
3822R

R2260 R2259
5022R
L1

GNDA R2275
CN2507

D2253 D2254
1622R
Q2201

Q2261 R2274
Q2263

VREF
Q2262

3
17

3622R
R
2022R
3622Q

4612R
4622R
3612R

R2281
2622R

Q2262
2822R

(XNP3061-B)

D
XV-EV61 73
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

4.8 DISP1, DISP2 and DISP3 ASSYS

A
SIDE A

I DISP1 ASSY

D5110

DISP1 W410
TIMER/CLK
S5108
STANDBY/ON
ASSY

W406

W407
W405
S5101 W409

W408
W411
B CN5101 S5107
W403

SOUND MODE
12
DISPLAY
S5102 12

D5201
W414
C5103

R5210
1
L5101

1
CONTACT
UPPER SIDE
ADV SURR S5106
ST MEMORY
S5103
CN5104 CN5101
1

S5105
SURROUND ENTER
S5104
E CN5501
10
10

J5103
J5103
4
4
W401

1
CN5102
C

1
8 1

1 8

CN5102 (XNP3071-B)

H VOL+
S5207
DISP2 ASSY

D 8
J5102 1

8 1 R5213
J5102 D5205
W416 VOL-
C5204 S5206
5201 1
D5217 D5207 D5209

TAPE
DISP2 ASSY TUNER
DVD/CD LINE
S5202 S5203 S5204
S5201 S5205
D5203

W404
OPEN/CLOSE

G DISP3 ASSY
(XNP3071-B)

E
4

J5103

DISP3
4

KARAOKE
J5103

S5301
ASSY W402
1

S5304
1

PLAY/PAUSE

DOLBY NR REVERSE
S5302 S5308

ASES S5307 S5309

S5303 TUNING- STOP TUNING+ REC/STOP
S5305 S5306
D5302

(XNP3071-B)

G H I
74 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

SIDE B A

I DISP1 ASSY

D5110
R5111

R5110

STANDBY/ON

S5101
S5108

TIMER/CLK
Q5110
B
R5107

R5101
12.LCDCLK
11.LCDDATA
10.GNDLED

3.VPR+15
2.REMOCON
1.TIMERLED
9.KEY1
8.KEY2
7.KEY3
6.VE+5

4.GNGU
5.GNGU
R5106

R5102
B
S5107

S5102
12
DISPLAY

C5101
SOUND MODE

CONTACT

C5102
C5104
DISP1 ASSY

SIDE
D5201
CN5101 1
1.NC
2.VLCD

S5103
S5106

3.GNDU AD SUR
ST MEMORY XWZ3727 4.VLCD
CN5101 5.VLCD

C5105
C5106

R5103
1
6.LCDDATA
XWZ3746
R5105

7.LCDCLK
8.LCDDATA

R5104
9.NC

CN5104
10.NC
S5105

S5104
ENTER

R5108
10
D

R5109
SURROUND
J5103
Q5101

3.REMOCON
4.GNDU
4

7.GNDLED
2.LEDCN2
J5103

1.VPR+15
3.KEY3

5.GNDU
6.GNDU

8.KEY2
4.VE+5
2.LEDCN2
1.LEDCN1
C
1

1 CN5102 8

CN5102 (XNP3071-B)
H DISP2 ASSY
0 1 2 3
0
0

1
1
0 1 2 3 4 5 6 7 8 9

VOL+
S5207
R5206

1
J5102 8 D
C
B
A

VOL-
C5207

D5211

S5206
C5211

D5209 D5207 D5217 J5102

D5205
A
R5208
C5201
R5209
C5202

C5209
D5213

Q5203 DISP2 ASSY

D5218

Q5203 1.VPR+15
2.LEDCN2
Q5201 3.REMOCON
R5205

D5203

B R5217 4.VE+5
5.GNDU
XWZ3728
D5202
C5205

6.GNDU
R5211
D5215

7.GNDLED
R5204

R5203

R5202

8.KEY2
D5216

R5201
R5215

OPEN/CLOSE
S5204

S5201
S5203

S5202

S5205

LINE TUNER TAPE DVD/CD

(XNP3071-B)
G DISP3ASSY
E
R5301

4.GNDU
4

3.KEY3
J5203

J5103

2.LEDCN2
S5301

1.LEDCN1 D E
KARAOKE
1

PLAY/PAUSE
R5304

R5305

S5308
S5304
DISP3 ASSY S5302
R5302

REVERSE
TUNING-
XWZ3729 DOLBY NR
TUNING+
R5308

R5307

R5306

R5303

REC/STOP S5306 ASES

S5305
A
B
D5301

C5301

S5309 S5303
STOP
D5302
C S5307

F
(XNP3071-B)

G H I
XV-EV61 75
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 F
E
B
A

D
C

76
K
SIDE A

1
1

CONTACT

3001
SIDE 1.VH-
2.VH-

W558
3.FROUT
4.GNDP
K

W634
5.GNDP
6.FLOUT

W614
CN3013 7.GNDS

Downloaded from www.Manualslib.com

W582
4.9 EVOL ASSY

1
8.SWOUT W504
9.VH+

1
R3796
10.VH+ W641

D3796
11.COUT

20
20
20.VH-

IC3101
12.VL+ R3758
13.VL+ W505 19.GNDP
IC3101

C3795
18.GNDS
14.SROUT
1.VL-

EVOL ASSY
D3060

D3756
2.VL- 17.VH+

CN3013
3.SLOUT
4.GNDF 16.GNDF

1
5.UN+8V

C3754
EVOL ASSY

L J3033
6.UN+8V 15.VL+

12
12

manuals search engine

2
2

7.GNDREG 1.FROUT 14.GNDTX

8.VD+5 W529 D3061
2.RETGND

W506
9.VA-12 13.GNDA
10.VP+15 3.FLOUT

W507
R3757 W617
11.VFL+5 4.RETGND

CN3007
12.VPR+8

14
5.SWOUT 12.VL-

14
13.VPR+8

N CN3305
W530 6.GNDB

W560
W583 11.RETGND
7.VH+
8.RY-F 10.RETGND
CONTACT W632 W633 W584
9.V+5D
SIDE 9.AC1
CN3003

10.XPROT W585

CN3007
W631
Q CN3

CN3012 11.HPAC
12.AC1 8.GNDB
W586

W510
W508
7.GNDREG

C3753

W511
W588
6.UN+8V

W587

XV-EV61
W562 W589

W561
5.GNDD

11

1
W590

1
1
1.XPROT 4.GNDD
D3755

12
2.XTUNER
3.SENS+8 W591 3.GNDM
4.MUTEC W531
5.MUTE W592 2.GNDM

1
6.FLIN W532
1

7
7
1

7.GNDA W593
W533 1.GNDDSP
8.FRIN

CN3006
9.GNDA W563 CN3003

3
3

W534

N CN3307
10.CIN

CN3012
D3591

L J3032
CN3006
11.GNDA
W535 W594
12.SWIN 1.COUT
13.GNDA C3954 C3951
W628 2.GNDB W595

W565
14.SLIN W536
3.SROUT
W629 15.GNDA 4.GNDB W642
16.SRIN

13
5.SLOUT

13
1
1
W630 W643
CONTACT

7
IC3951
NJM7812

W540
6.RY-R
SIDE
IC3951

W597

W538
W539
7.VF+12 PRINTED

CN3011
SIDE
W644

1
1
W518
W519
W520
W542

1
W521
W543
W544
W545

XV-EV61
W645

W514
W515
W516

L CN3031
52044-1645
W513
C3111

3CH
C3197
W646

6CH
12
W648
W483

16

4
W484

C3757 C3758
4

W627

16
C3112 C3198

CN3011
(6CH)
(3CH)

CN3011
(3CH)
W647

(6CH)
W501

XV-EV31
IC3071

L CN3031
W566
W541

W502

52044-1245
W481 (3CH) W649 (3CH)
W635
IC3071

W618
W606

W512
C3149
W482 (3CH)

UPPER SIDE
CONTACT ON
IC3072
R3164

C3955

C3190 C3189
IC3057

W546
IC3072

W568
PRODUCT

J3002
ICT
IC3057

IC3
IC

FC
 5 6 7 8

SIDE A A

O HP ASSY
IC3072 IC3901
IC3057 IC3058
IC3056 IC3055

J3902
XNP3072-B 1 4 B
W616

W615
1 4
J3902
R3911 J1

C3918
IC3901 R3901

C3926
PRODUCTION CODE
W639 HP ASSY

C3911
W460
W610

CONTACT

C3925
R3902
R3206

SIDE
IC3072

C3912

W613
W611
W607

3901

W612 R3912

FC
C3917

CN3008
4
4
W604
C3908
W567

4.HPL (XNP3072-B) C

1
IC3058

11
C3166

3.GNDHP

ICT
W601

2.HPR
W608

1.HPDET

CN3008
W494

C3907
C3164

C3906
(3CH)

R3177

B4
W650

W603

W581
4
4
C3134

4.SUBAC
W574

J3009
IC3055
W599

IC3057
J3009
W569

3.VE+56
W578 2.GNDU
P CN7
W605
R3164 1.SYSPOW
W572

W573

1
W568

W579
W600

W576
1
C3136

W577

C3139 C3151 W492 (3CH)

W570 C3152
W491 (3CH)
W580

W575
C3189

W571
IC3056 D
W550 W554

C3150
W556
C3190

W555
W549
1.C 18.EDATA
W548
(6CH)

2.GNDA 19.ECLK W557

C3140
(6CH)

3.SL 20.EMUTE
W547

4.GNDA C3173
21.SYSPOW
W553
W546

C3924 5.SR
W528

22.HPAC1
W522

W552

C3196 6.GNDA
23.MUTE
W551

W523 7.SW
24.RY-F
(3CH)

8.GNDA C3174
C3923

9.FL 25.RY-R
10.GNDA 26.MUTEC
C3113

R3119 11.FR 27.GNDHP

W493

12.GNDA 28.LVLSHFT
W527
W526
C3955

13.XPROT 29.VE+56
W524
14.XTUNER 30.GNDU
C3095 15.SUBAC
R3118 16.HPDET
17.XHPMUTE
W525

E
C3096

C3064 C3063
C3114

15 10 1
30 30
W503

CONTACT ON
UPPER SIDE

J3002 1 1
CN3001

15 1
9.VPR+8M
8.VPR+8M
11.GNDM
10.GNDM
15.GNDDSP

12.VP+15

5.VPR+8
4.VPR+8
14.VD+5

7.GNDD
6.GNDD
13.VA+5

1.VA+12
2.VF+12
3.VA-12

ON
IDE

J3002 CN3001
(XNP3072-B)

E CN8302 E CN8303
F

O K
XV-EV61 77
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 R3115 R3342 C3159 R3163
IC

IC3057
9

VA-12 R3702
C3341
R3776
C
B
A

R3769 R3113 R3701

R3108
1

R3169 R3154
8

C3194
IC3072

C3160
1

R3167 R3109 C3147 R3160

J3002
IC3072

C3193 R3174
5
4

R3173 R3176 C3267

R3168
5
4

R3175 R3124 R3111 R3107 C3337

8

R3171 R3172 R3770 R3159 R3303

C3153 R3153

15
C3223 C3224 R3774 C3145 R3104 15.GNDDSP
IC3056

R3165
5
4

R3772 C3268 14.VD+5

C3155 R3112 R3155 C3256 13.VA+5
R3181 R3255 C3255 IC3056 R3156
C3283 C3279 C3154 R3103 12.VP+15
R3183 C3336 C3146
R3117 11.GNDM
C3165 C3156

10
R3265 R3179 R3185 R3256 C3142 VA-12 10.GNDM
4

4
J3002
R3180 R3242
R3186 C3163 9.VPR+8M
R3187 R3170
8.VPR+8M
R3158
R3138 C3144 7.GNDD
R3123 6.GNDD
R3137 C3143
R3302

VA-12
R3927 C3195 VA+12 C3141 5.VPR+8
C3915
IC3058

R3921 R3241

VD+5
R3922 R3933 VA+12 4.VPR+8
R3130 R3157
C3909 VA-12 R3178 3.VA-12
R3106

D3053
R3925 C3170 R3208 C3172 R3207 2.VF+12
R3152

D3052
IC3058
C3913 C3171 C3148
1

R3136

1
R3923 R3151
VA+12 R3105 C3236 1.VA+12
R3205 R3150
R3149 R3110
C3235
IC3055

5
4

R3135 VD+5
IC3901

IC3055
8
1
IC3901

CN3001
C3910 R3101
C3914
1

1
4 C3121 VA+7
8

R3926 R3338 1.C

C3122
R3924 R3337 GNDA
C3169 R3102 R3190 C3335 SL
C3916 R3139 D3701 R3336 GNDA
R3341 R3339 C3123 5.SR
R3934
C3124 R3335 GNDA
R3928 C3334 SW
C3338 R3191
3

3
C3182 C3126 R3334 GNDA
C3339 C3179 D3702 FL
R3340 C3183 C3125 10.GNDA
R3929 R3930 R3145 C3184
R3182 C3186
C3116 FR
Q3908
Q3907

R3937 C3187 C3178 R3144 C3185 GNDA

R3935 C3180 C3177 R3096

21

20

CN3001
21

20
C3176 XPROT

1.SYSPOW
R3939 C3181 R3184 XTUNER
R3938

4.SUBAC
Q3907 Q3908 C3168 R3141
IC3062

3.VE+56
2.GNDU
R3146 R3098 15.SUBAC

VA+7
R3936 R3140 HPDET
Q3903

VD+5

IC3062
C3138 R3142 XHPMUTE
R3147

3.GNDHP
R3148 C3128 EDATA

1.HPDET
R3940 C3137
Q3065 Q3909

C3922 R3910 C3115 ECLK

2.HPR
R3942

4.HPL
C3921 Q3903 C3135 R3132 20.EMUT

XV-EV61
Q3909
SYSPOW
Q3906

R3916 C3130 HPAC1

R3941

40
MUTE
Q3906
Q3905

R3944

1
C3118

1
40
C3131 RY-F

Q3065
R3943 C3132 R3134 25.RYR
Q3905
C3902 C3133 R3131 MUTEC
C3117 GNDHP
Q3902

D3901 R3143 LVLSHFT

Q3901

C3901 VE+56
CN3008 J3009 30.GNDU
C3129
Q3901 R3917 R3918 Q3902 4 1 1 R3133

30
R3905 R3906
4 1
CN3008
EVOL ASSY
2

2
manuals search engine
J3009
R3909
L3902
R3914

J3902
R3908

1
C3904
C3903

3
J3902

2
6
H.P ASSY

7
R3904

5
4
R3903

1
R3913

Downloaded from www.Manualslib.com

R3907 L3901

3.GNDHP
1.HPDET
K C3905

2.HPR

4.HPL
C3907
R3915

(XNP3071-B)
C3906
L3903
C3910

HP ASSY
XWZ3731

O
1

1
K O
SIDE B

78
C

D
A

F
 B

F
C

D
A

79
K
SIDE B

8
8

CAUTION

(XNP3072-B)
INC.

VH-

REPLACE IC LINKS AS
COMME INDIQUE.DE

MARKED.MFD BY LITTELFUSE INC.

CHEZ LITTELFUSE
ATTENTION

D3796

R3752 FROUT
REMPLACER LE IC LINKS

11
R3756
491007 R3354 1.VH-
2.VH-
20

20.VH- 3.FROUT
IC3101

C3756
Q3754

C3752 4.GNDP
Q3752

19.GNDP FLOUT 5.GNDP

Q3752 Q3754

CN3013
18.GNDS 6.FLOUT
R3754 R3766 7.GNDS

D3756
17.VH+

CN3013
R3759 8.SWOUT
16.GNDF 1.FROUT 9.VH+
D3060 D3754 10.VH+
15.VL+ 2.RETGND
1 11.COUT
14.GNDTX 3.FLOUT R3768
13.GNDA D3061 4.RETGND 12.VL+
7

7
SERVICE

5.SWOUT
SHORT

13.VL+
FOR

6.GNDB 14.SROUT
7.VH+ R3751
CN3003

CN3007
12.VL- 8.RY-F

14
R3755
RETGND 9.V+5D C3751
11.RETGND
10.XPROT C3796
Q3751

10.RETGND RETGND 11.HPAC C3755

Q3751
12.AC1
9.AC1 AC1

CN3007
R3353
8.GNDB R3765

XV-EV61
GNDB R3753
7.GNDREG
VL-
Q3753

6.UN+8V
Q3753

1
5.GNDD GNDREG R3760
D3753 R3767 1.VL-

12
4.GNDD 2.VL-
UN+8V

CN3012
3.SLOUT
3.GNDM D3755
GNDD 4.GNDF
2.GNDM 5.UN+8V
6.UN+8V

CN3012
1.GNDDSP GNDM
1

1.COUT 7.GNDREG

1
HPAC
8.VD+5
2.GNDB 9.VA-12
VF+12 10.VP+15
3.SROUT

CN3006
11.VFL+5
VP+15
6

6
4.GNDB 12.VPR+8
D3591 13.VPR+8

CN3006
VA+12 5.SLOUT
6.RY-R
7.VF+12

13
C3952
R3763
C3953

1
XWZ3741

VPR+8M
GNDM
R3351

VP+15
GNDD
1.XPROT

VPR+8
VA+12

VA-12
Q3351

XTUNER

Downloaded from www.Manualslib.com 5manuals search engine

SENS+8

Q3351
XWZ3736 MUTEC

GNDREG
GNDDSP
IC3951

5.MUTE

CN3011
IC3951 R3355
FLIN
EVOL ASSY GNDA
FRIN
GNDA
10.CIN

0 1 2 3
R3369 GNDA

0
0
R3711 SWIN
GNDA

1
1
C3343 SLIN
C3342 C3192 15.GNDA
R3356 R3370 C3191 SRIN
Q3067 R3116

0 1 2 3 4 5 6 7 8 9
R3775 R3712 R3114 R3162

VD+5
R3771 R3166 R3161 Q3068
5

16
R3352 R3705
IC3071
Q3067

CN3011
Q3352
R3773 R3703
IC3071 R3122 R3706
R3764 Q3352

8
IC3057
C3340 R3343 R3704
R3342 C3159 R3163

5
R3115
IC3057 R3702
VA-12
C3341
R3776

C
B
A
R3769 R3113 R3701
R3108

8
R3169 R3154

8
C3194

72
C3160

1
R3167 R3109 C3147 R3160
 F
E
B
A

D
C

80
SIDE A

L N
1
1

L
N

K
CN3011
EV61/16P
CN3031

Downloaded from www.Manualslib.com

16.SRIN
15.GNDA
CN3021 23.VPR+8
14.SLIN
22.VPR+8 13.GNDA CN3031
21.SRIN 12.SWIN
11.GNDA

123
20.SLIN 10.CIN
9.GNDA

16 1
K CN3011
19.SWIN 8.FRIN 6 3 5 2 4 1
18.CIN (3CH) 7.GNDA
6.FLIN
17.FRIN

12
W498 12 6 11 5 10 4 9
6 33 58 22 47 11

JA3302
JA3301
16.GNDA

EV31/12P
15.FLIN

6CH
14.MUTE
13.MUTEC W497

(3CH)
(6CH)
12.SENS+8 (6CH)

TRADE ASSY
W306 W313

10
11.VFL+5 W301 W302 W330 W312
5.MUTE
10.VP+15
3603

4.MUTEC RY3643 3CH

3CH
9.VA-12 3.SENS+8 W322
2.XTUNER

CN3021
8.VD+5

CN3031
1.XPROT
7.TUNER

manuals search engine

2
2

6.XPROT

16
(3CH)
5.GNDREG

1
W495
4.GNDREG
C3671

3.UN+8V

M
2.UN+8V
1.GNDF

231
W496 W324

1 CONTACT
(6CH)

SIDE
SP-TERMINAL ASSY

13
W325
CONTACT SIDE

W303 RY3641

CN3002
RY3642

13
W307

13
CN3305

W352
W351
CONTACT SIDE
L3361

W314
13.VPR+8

L3561
1

R3561
R3362

L3661
R3361
12

L3362
12.VPR+8

10
23.SLOUT

R3661

123
11.VFL+5

CN3012
22.SLOUT
21.VL- 10.VP+15
W320
W326

20.VL- 9.VA-12

W353
19.SROUT 8.VD+5
18.SROUT 7.GNDREG 1.FROUT
4.10 SP-TERMINAL and TRADE ASSYS

XV-EV61
17.VL+

J3032
6.UN+8V 2.RETGND

J3032
16.VL+
15.COUT 5.UN+8V 3.FLOUT
14.COUT 4.GNDF 4.RETGND
R3608

W308
13.VH+ 3.SLOUT 5.SWOUT
R3607

12.VH+ 2.VL-
6.GNDB

1
R3627
11.SWOUT 1.VL-
7.VH+
CN3305

1
R3628
10.SWOUT
W315

9.GNDS 8.RY-F

CN3022
8.FLOUT 9.V+5D
7.FLOUT L3461 W316 10.XPROT

W304
6.GNDP R3631
K CN3007

11.HPAC
5.GNDP
4.FROUT R3632 12.AC1

W309
1

3.FROUT
12

2.VH-

3
M
3

231
1.VH-

SPK ASSY

14
D3631

14
R3617

K
CN3022
W327
1

14.SROUT Q3641

CN3001
7

13.VL+ C3632
12.VL+ W317 1.COUT
11.COUT R3461 2.GNDB
CONTACT 10.VH+

(3CH)
3.SROUT

CN3013
10

W354
9.VH+ W328
SIDE 8.SWOUT
7.GNDS W329 4.GNDB
6.FLOUT
5.GNDP R3462
R3668
W318

4.GNDP
R3633

W321 5.SLOUT
3.FROUT

J3033
6.RY-R

J3033
2.VH-
CN3307

1.VH- 7.VF+12
R3635
1
7

C3633
R3618
W310

D3632
W319
W311

CN3307

TRADE ASSY
K CN3006

R3634

1
1
D3634

1
D3633
L3462
C3631

CONTACT
SIDE

(XNP3072-B)

(XNP3072-B)

4
4

Q3713
Q3701
Q3702
Q3352
Q3351

L N
SIDE A
 B

F
C

D
A

81
SIDE B

N L
(XNP3072-B)

8
8

Q3602

Q3621

(XNP3072-B)
Q3637 Q3638

Q3611
Q3644

Q3642

Q3622
Q3632
Q3639

Q3635 Q3645
Q3641

Q3636
Q3601

Q3612
Q3640

Q3633
Q3633
Q3632

23.VPR+8
Q3631

23
16.SRIN 22.VPR+8
15.GNDA
14.SLIN 21.SRIN

16
13.GNDA 20.SLIN
12.SWIN 19.SWIN
11.GNDA
18.CIN
17.FRIN
10.CIN 16.GNDA

CN3031
9.GNDA 15.FLIN

CN3021
8.FRIN 14.MUTE
J3302 7.GNDA 13.MUTEC

10
6.FLIN 12.SENS+8
5.MUTE 11.VFL+5

CN3031
C3469 C3470 4.MUTEC 10.VP+15
C3670 3.SENS+8 9.VA-12
2.XTUNER 8.VD+5
C3369 C3370 C3569 1.XPROT
7

7
7.TUNER
C3669 6.XPROT
C3368 5.GNDREG
C3563

1
R3467 4.GNDREG
C3367 R3563 R3565 3.UN+8V
R3365 C3561 R3566 R3465
C3365 2.UN+8V
R3366
1.GNDF
R3368 R3667

1
D3641 R3367 C3567

CN3021
C3366 C3564 R3468 R3350
C3565

13
R3466
C3364 D3642

XV-EV61
R3562 R3665
C3363 R3364 C3362 C3667

10
C3562 D3643
C3665 C3468

23
R3363 C3465
C3466

J3032
C3467

J3032
C3361 C3464
Q3601 C3463 R3464
R3463 C3462
R3605

R3625
1

C3461
Q3622

XWZ3737
Q3621

CN3022
XWZ3742
R3606 Q3602 C3674 C3675
C3672 R3626

D3623

CN3022
D3603

1
CN3305

D3613
R3603 D3621
D3601 R3623 C3627
R3601 R3621 D3622
2.RETGND

4.RETGND
5.SWOUT
1.FROUT

R3624
3.FLOUT

C3673
10.XPROT

7.GNDREG
6.GNDB

9.V+5D
8.RY-F
SP-TERMINAL ASSY

11.HPAC

R3622

3.SLOUT

5.UN+8V
6.UN+8V
7.VH+

R3602

4.GNDF
12.AC1

12.VPR+8
13.VPR+8
8.VD+5
9.VA-12
10.VP+15
11.VFL+5
R3650 R3604

1.VL-
2.VL-
6

6
R3649 Q3632 D3602

Q3611

1
R3648 UMB1N D3611 R3613

14
CN3305

E B C
C B E
C3676
R3611 18.SROUT
12

R3647 17.VL+
Q3641
D3635

22k R3643 R3615 16.VL+

R3644 23.SLOUT 15.COUT

10
D3631 R3616 22.SLOUT 14.COUT

J3033
J3033
R3669 C3677 21.VL- 13.VH+

D3644

SPK ASSY
Q3642 20.VL- 12.VH+
1

C3668 Q3644 19.SROUT 11.SWOUT

TRADE ASSY
Q3639 R3638 R3645 10.SWOUT
CN3307

Q3612
1.COUT Q3638 9.GNDS
2.GNDB R3646 D3612 8.FLOUT
CN3307

7.FLOUT

8.SWOUT

14.SROUT
3.FROUT
3.SROUT

6.FLOUT
4.GNDP
5.GNDP

7.GNDS
Q3645

11.COUT
6.GNDP

Downloaded from www.Manualslib.com 5manuals search engine

9.VH+
4.GNDB

13.VL+
1.VH-
2.VH-

10.VH+
12.VL+
5.GNDP
5.SLOUT R3651 D3637 R3614
R3612 4.FROUT
6.RY-R R3642 3.FROUT

Q3637
7.VF+12
Q3635
R3641
TRADE ASSY 2.VH-
1.VH-

1
R3639 Q3633
7 RN1901
Q3640 Q3636 XWZ3740

Q3632
NP

E B C
C B E
XWZ3745

Q3633
D3632
D3636
D3633
D3634 Q3631 4.7k
5

N L
SIDE B

L
N
 4 3 Downloaded from www.Manualslib.com
1 manuals search engine
2
XV-EV61 82
M M
F
(ANP7461-A)
C3178 C3501 C3577
W158
W159
W160
W161
AWM
IC3401

W101

W115
C3168 C3402 C3478
7788
7787
7786
7720

R3519
AMP Assy

W102

C3401
W116

C3167 R3517
C3477
W204

W136

C3424
E
19

19

W164

W117
C3507
FR1S P

C3179 C3502 C3578

W163
W162

C3408
W137
W103

GNDP R3420
C3302
W118

C3318 R3418 D3422

C3378 R3428 D3428
D3426
Production Code
W187

W119
IC3401
W138
10

10

C3317 C3301 C3377 -B W165 R3422 D3424

W139
GNDP W166
W140 R3421 D3423
+B D3425
C3422
C3421

W120

C91
word surface

W104
W188

Q91

W105 D3427 R3419 D3421

IRFI9Z34G

C98 R3427 Q91

R3417
W141
1

1
W205

GNDP
W106
D98
W168
W169

W167

C3423
C3407
W189

Word Surface

W170 GNDS
W107
W121

D
W122 W142 SLOUT
W143 SWOUT W190
IC81

IC81
W171 GNDREG
C82
C102
Q62
W144 SROUT
D82
Q62

W172
C63

D3651
D3652 W123
FC DC
R3657

W173 VA-12
C3652
W191

D3653 W192 VD+5

W108
W148

W193 VPF+15
C3653

2323
W145

W194 VP+15
NJM7805FA

W110 Q61
C3651

D3654 W124
Q61

C101
W127
W146
W147

W125
2SD2012

UN+8
W109 VA-12
W126
CN3021 Q3654
W195 XPROTECT
D3655

W196 VF-12
Q3654
W207
W206

IC3301

IC3301
L
W197
C3323
C3307

VL+

CN3302
D3

W174
IC71
39
IC71

1
1
GNDP
1

CN3002
R3317 W149
+B
W175
NJM7912FA

IC3303 C

W129
W176

W128
D3321 D3327 R3327 VL+ D72
C72

1
IC3303
R3319

1
D3325
C3322

W177
C3321

R3321 D3323 W150 +B

W178
Word

W151 GNDP
Surface

W179

W112
W132
IRFI9Z34G

R3322 D3324 D3326 -B

10
10
D3393
R3328

2323
R3318

W131 SROUT
D3328 W180 VL-
D3322

W111
W113
Q3383

word surface
W181
D3389

Q3383

R3320
39

W182
W199

FLOUT
D3

W130
SWOUT
GNDP
W198

C3308
CN3022
C3508 R3387

W153
W154

VL-
D3394
R3518

19
19
L
C3324 W200

W133
R3520

W152

CN3001
W202

W201
Q3384
D3390

Q3384

W135 VL+
-B

CN3001
W183 VL-
D3387

W114 VH+
W155 FROUT

1
W184
W185
D3385 R3388

1
B
W156 VH+ D3386 W203
IRFIZ34G

W157 VH- D3388

1
CN3651
DC FAN MOTOR
MOD. AMP ASSY M
A
SIDE A SIDE A
4.11 MOD. AMP ASSY
4 3 2 1
 8 7 6 Downloaded from www.Manualslib.com 5manuals search engine
83 XV-EV61
M M
F
(ANP7461-A)
R3545
R3573 R3503
R3575

Q3501 Q3571
C1 B2 E2
E1 B1 C2

R3501
R3577 Q3571 R3571 R3513 Q3501
R3478 Q3472 R3472 R3414 Q3402
R3531 R3591 R3402
Q3402 Q3472
AWM
7720
7786
7787
7788

R3474 R3404
R3543
R3537 R3539 R3446
R3505 D3543 R3445
D3581
E
AMP Assy

R3511 R3403
C3505 R3473
R3475 R3476
FR1S P

Q3533 Q3531
C3503
Q3531
Q3533

R3509 R3401
C3509 R3533 C3426 R3477 Q3471 R3471 R3413 Q3401
Q3572 R3572 R3514 Q3502
Q3401 Q3471
R3507 R3432
R3426 R3578 R3502
R3408 R3440
Q3504

R3492 GNDP R3574

Q3504 Q3502 Q3572
C3404 R3410 R3500
C3410 C3406 R3546 R3504
Q3434

Q3432

R3412 R3346
Q3434 Q3432
R3406 D3444 R3304
R3374
R3376 R3576

R3444
D3482
Q3302 Q3372
R3438 R3434 R3302
D3441 R3378 Q3372 R3372 R3314 Q3302
-B
R3424 R3377 Q3371 R3371 R3313 Q3301
Q3301 Q3371
R3301
GNDP
+B R3373
IC3401
R3303
R3375

R3435 R3345
R3443
IC3401

D3481 R3437 R3433 R93

R3423 D91
R47
G

Q92 C92
D3443 R91
Q92 Q92
Q3431 D104 R48
Q3433

R3491 R92
R122
D

C3405 R3409
GNDP
Q3431 Q3433
R3439 R97
R121
1

R3411 R3431 TH121

C3409 C3403 R3416 R123 R96
Q121
D
R3451
S

R3407 GNDS
Q43

Q121 Q43
R3405
SLOUT R46 C81 C97
R95
Q111
SWOUT Q111
R45
GNDREG
R112
Q104

Q63

R62 SROUT
R111
Q104 Q63
R61 C62 R94
R68 R113
R63 R3651
Q3652

Q107 Q3652
D106 TH111
Q107

R104
R67 VA-12
Q103
D42
R65
Q106 Q103
VD+5 R3658
NP
R64 R3654
Q3653

R105
Q106

R66 VPF+15
23

C61 R114
Q3653
R106
VP+15 R108 VPR+8
D102 VPR+8
SRIN
UN+8

D3657 SLIN
Q3651

Q101

Q101
SWIN
VA-12

D3658 CIN

B C E
NP
R101 R3655 FRIN
Q3651 XPROTECT GNDA
FLIN
VF-12 MUTE
R3656 R3307 C3303 MUTEC

Q102
R109 R3326 SEN+8
VL+ R3316
Q102
C3326 R3305 VFL+5
VP+15
GNDP VA-12
1

R3309 C3305
CN3002

VD+5
+B R3339 R3311 TUNER
C
R3331
Q3333 R3391 XPRCT
C3309
Q3331 Q3333 Q3331
GNDR
VL+ R3323 GNDR
UN+8
D3343 UN+8
C71 R3343 GNDF
R3333 R3337 D3381
1

+B R3335
R102 R103
GNDP
-B
IC3301

D101 D105
23

D3341
IC3301
R3334 R3338 R3324
SROUT

D3382 R3351 SLOUT

S
R3344 SLOUT
VL- VL-
D3344 R3306 VL-
SROUT
SWOUT
FLOUT

Q3332 Q3334
C3306 R3312 SROUT
R3392 R3310 C3304 C3310

Q3332
Q3334 R3332 VL+

G D
R3340 VL+
GNDP COUT
R3308
VL-

COUT
R3508
R3389 R3534 VH+
Q3534 R3540 VH+
R3510
SWOUT
Q3532 Q3534
C3504 SWOUT

S
Q3532
C3506 R3512 GNDS
VL+
D3582 C3510 FLOUT
CN3001

R3506
D3544 R3538 FLOUT
GNDP
-B R3544 GNDP
VH+

VL-
Q3381 FROUT

G D
R3592 R3532 FROUT
Q3381

R3385
R3381 VH-
B
FROUT VH-
1

R3390

R3383
VH+
R3382

R3384
Q3382

R3386
Q3382 VH-
FAN SIDE
CN3561
MOD. AMP ASSY M
A
SIDE B SIDE B
8 7 6 5
 4 3 Downloaded from www.Manualslib.com
1 manuals search engine
2
XV-EV61 84
P T1 POWER TRANSFORMER AC IN P
(XNP3072-B) CN1 CN2
F
l
j
a

k
g
b

h
e
d
c

S1

W122 W128
ALL W152
W123
DD/DBD/DL W153 W130
L
N

KUC/JP
AN1

PRIMARY MY/NV/NK
W134
H1

W136 W135
H4

SIDE W137
4 CN2 1
YPW 3 1 OPEN
SIDE
W113
DD/DBD/DL
W110

CN1
W125
W124
FU2

OPEN
SIDE 1
W131
W129

W138
FU1

JP
KUC

W111
H2

H3

WIRE

DD/DBD/DL

2 1
E
H6 W132 H5
W109
W108

TX WINDING
CHK TX WINDING
W105 W101 W148 CHK
W106 W102 W149
FU3 W133
ALL EXCEPT NK
C1

DD/DBD/DL
C3

W132 W111 /YPW

NK
MY/NV/NK WIRE JP
PRIMARY ASSY
W147
1 ALL W146
FIRE
AS MARK
RISK OF
REPLACE FUSE

C5

W107
W104
T2

W115
D
1
W150

W151
3
4

W114
L1

W117
RY81
1

W116
D88
R1

SECONDARY
R84

SIDE
Q81
W175

Q81
C83

IC5508 C
O
IC5508

78M56
PRINTED SIDE

C84
I

D87
D89
R86
W177
PRI ASSY
C82

W176
B2

CONTACT
B
SIDE

XWK3114

XWK3115
4
4
4

B3
CN7

W453
W452
W451
CN7
1

1
1

KN1
K J3009
PRIMARY ASSY P
A
SIDE A SIDE A
4.12 PRIMARY ASSY
4 3 2 1
 5 6 7 8

SIDE B SIDE B
A

P PRIMARY ASSY
1.SYSPOW

CN7
2.GNDU
3.VE+56
4.SUBAC

4
XWK3115
XWK3114
AMP-MAIN ASSY

CN7
B

D89

XWZ3738
PRI ASSY

IC5508
D87

IC5508

R85

C85
R83
C

R81
Q81

Q80
Q81

Q80
D80 SECONDARY
SIDE
∼

D88
∼

RISK OF
REPLACE FUSE

D
FIRE
AS MARK

A
V
WINDING

ALL EXCEPT NK W132 W111

CHK

TX

NK MY/NV/NK
DD/DBD/DL
/YPW
JP WIRE
FU3 V
A
CN1
E
WIRE
DD/DBD/DL

KUC

2 1
JP
DD/DBD/DL

CN2
FU2

FU1

4 1
CN1
YPW CN2

PRIMARY
MY/NV/NK
DD/DBD/DL
SIDE
N
KUC/JP
L

F
(XNP3072-B)

P P
XV-EV61 85
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

4.13 SECONDARY

A
SIDE A SIDE A

Q SECONDARY ASSY

K CN3003
B
CN3
GNDMDVD

RETGND
GNDMTC

GNDREG
1.GNDDSP

10.RETGND
5.GNDD

GNDTX

20.VH-
GNDS
GNDP
15.VL+
GNDD

GNDB

GNDA

GNDF
UN8V

VL-

VH+
AC1
1 20

1 20
CN3

A
B

CAUTION
IC25
W211 IC23

IC23
BOND W209
IC25
C41
BOND

REPLACE IC LINKS AS
MARKED.MFD BY
LITTELFUSE INC.
C22 W210

C BOND
D41
W208
W205
W207
1 2 3 4

C21
BOND
491007 W206
SEC ASSY

IC41 W212
C9041

IC41
TRANSFORMER

CN4
BOND
7

IC21
W213

7.SUBAC1 C9023 C9021

1

C12
C9022

W204
6.SUBAC1 IC21
5.BHAC2
4.BLAC2
W214

3.GND IC22
POWER

3
CN4

R9021
W203

W216

2.BLAC1
1.BHAC1 IC22
BOND
4

D IC12
T1

IC12
BOND

1 2 3 4
D21
IC11
W215
1

OPEN SIDE
C11
W202 FRONT IC11
C9012

C9013

B1 D
BOND
C R9011
D11
W201

ATTENTION 1 2 3 4
REMPLACER LE IC
LINKS COMME
C9011

INDIQUE.DE CHEZ
E LITTELFUSE INC.

(XNP3072-B)

Q Q
86 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

SIDE B SIDE B A

Q SECONDARY ASSY

CN3 B

20 CN3 1

20 1

19.GNDP

17.VH+

12.VL-
18.GNDS

16.GNDF

13.GNDA

11.RETGND
10.RETGND
14.GNDTX
15.VL+

5.GNDD
4.GNDD
3.GNDM
2.GNDM
1.GNDDSP
20.VH-

6.UN+8V
7.GNDREG
8.GNDB
9.AC1
SEC ASSY
IC23 IC23

IC25
XWZ3739 IC25
XWZ3743

D21
REMPLACER LE IC LINKS

D11
ATTENTION

D41
CHEZ LITTELFUSE INC.
COMME INDIQUE. DE

491007
IC41
IC41

7.SUBAC1 IC21

7
6.SUBAC1
IC21 5.BHAC2
4.BLAC2
3.GND
2.BLAC1
IC22
1.BHAC1

CN4
IC22
CN4

D21
IC12
IC12 D
1

IC11 IC11
CAUTION
REPLACE IC LINKS AS
MARKED.MFD BY LITTELFUSE INC.
D11

(XNP3072-B)

Q Q
XV-EV61 87
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

5. PCB PARTS LIST

NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
A The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω 56 x 10 1 561 RD1/4PU 5 6 1 J
47k Ω 47 x 10 3 473 RD1/4PU 4 7 3 J
0.5 Ω R50 RN2H R 5 0 K
1Ω 1R0 RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω 562 x 10 1 5621 RN1/4PC 5 6 2 1 F

B Mark No. Description Part No. Mark No. Description Part No.
LIST OF ASSEMBLIES NSP 1..LOADING MECHANISM ASSY VWT1208
XV-EV61/DLXJ/NC NSP 2..LOAB ASSY VWG2346
1..DSP ASSY AWX8254
1..AMP MODULE AXQ7248
NSP 1..MEDIA ASSY XWM3226 2..3CH AMP ASSY AWM7787
2..IF/AF ASSY XWZ3726
2..DISP 1 ASSY XWZ3727 1..FM/AM TUNER MODULE AXQ7228
2..DISP 2 ASSY XWZ3728
2..DISP 3 ASSY XWZ3729
2..MIC ASSY XWZ3730
2..H.P ASSY XWZ3731 Mark No. Description Part No.
C
NSP 1..AMP ASSY
2..E-VOL ASSY
XWK3114
XWZ3736
A LOAB ASSY
2..SP-TERMINAL ASSY XWZ3737 OTHERS
2..PRIMARY ASSY XWZ3738 CN602 KR Connector S2B-PH-K
2..SECONDARY ASSY XWZ3739 CN601 KR Connector S5B-PH-K
2..TRADE ASSY XWZ3740 PCB BORD VNP1836
101 Reaf SWITCH VSK1011
1..DECK ASSY XWZ3072

NSP 1..DVD ASSY AXA7121

2..DVDM ASSY AWM7808
C FM/AM TUNER MODULE
D NSP 1..LOADING MECHANISM ASSY VWT1208
SEMICONDUCTORS
NSP 2..LOAB ASSY VWG2347
IC201 BA1451F
IC202 LC72131MD
1..AMP MODULE AXQ7242
Q201, Q204, Q205 2SC2412K
2..6CH AMP ASSY AWM7720
Q202 DTA124ES
Q203 DTC124EK
1..FM/AM TUNER MODULE AXQ7228
D201 1SS133
D202 MTZJ5.1C
XV-EV31/DLXJ/NC

NSP 1..MEDIA ASSY XWM3228 COILS AND FILTERS

2..IF/AF ASSY XWZ3733 L201 (FM Detector coil) ATE7003
2..DISP 1 ASSY XWZ3727 F202 (Ceramic filter) ATF-107
E
2..DISP 2 ASSY XWZ3728 F201 (Ceramic filter) ATF-119
2..DISP 3 ASSY XWZ3729 F203 (AM Ceramic filter) ATF1155
2..HP ASSY XWZ3731
2..MIC ASSY XWZ3734 CAPACITORS
C206 CCSRCH100D50
NSP 1..AMP ASSY XWK3115 C212, C213, C226, C233-C235 CCSRCH101J50
2..E-VOL ASSY XWZ3741 C240 CCSRCH101J50
2..SP-TERMINAL ASSY XWZ3742 C231, C232 CCSRCH150J50
2..PRIMARY ASSY XWZ3738 C223 CEAT100M50
2..SECONDARY ASSY XWZ3743
2..TRADE ASSY XWZ3745 C229 CEAT101M10
C224 CEAT1R0M50
F 1..DECK ASSY XWZ3073 C227 CEAT220M25
C241 CEAT2R2M50
NSP 1..DVD ASSY AXA7122 C243 CEAT330M16
2..DVDM ASSY AWM7809
C228 CEAT3R3M50
88 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
C237 CEAT470M10 COILS AND FILTERS
C211 CEJA1R0M50 L5501 LAU220J
C210 CEJA470M16 L5502 VTL1075 A
C204, C238, C602 CKSRYB102K50 L5901 VTL1086

C101, C102, C208, C220, C239 CKSRYB103K50 CAPACITORS

C242, C601 CKSRYB103K50 C5501 (0.047F/5.5V) ACH1246
C216, C217 CKSRYB123K50
C5504, C8212 CCSRCH101J50
C225 CKSRYB153K50 C5592, C5801, C8401, C8402 CCSRCH221J50
C201, C205, C209, C214, C230 CKSRYB223K50 C5903, C5904, C5906, C8723 CCSRCH470J50
C8761, C8762 CCSRCH470J50
C236, C603 CKSRYB223K50
C221 CKSRYB224K10 C8611, C8612 CCSRCH680J50
C202, C222 CKSRYB473K16 C5511, C5715, C5718, C5719 CEAT100M50
C215 CKSRYB681K50 C5803, C5804, C8115, C8116 CEAT100M50
C8121, C8122, C8221, C8509, C8510 CEAT100M50 B
RESISTORS C8603, C8604, C8617-C8620 CEAT100M50
R211 RD1/4PU221J
R221 RD1/4PU222J C8701, C8702, C8711, C8712 CEAT100M50
R233 RD1/4PU391J C8715, C8716, C8721, C8722, C8728 CEAT100M50
R243 RS1/10S0R0J C8737, C8751, C8752, C8833-C8835 CEAT100M50
R103 RS1/10S331J C5502 CEAT101M10
C5640, C8615, C8616 CEAT101M16
R104 RS1/10S391J
Other Resistors RS1/16S###J C5901, C5902 CEAT102M6R3
C5506, C8773 CEAT1R0M50
OTHERS C5608, C5610 CEAT220M25
CN201 13P Connector 52044-1345 C5716 CEAT220M50
BN201 4P Terminal AKA7003 C8305, C8308-C8310 CEAT2R2M50 C
Shield Case T ANK7072
Shield Case B ANK7073 C5963, C5966, C5968, C8201, C8213 CEAT470M16
X201 Crystal RES.(7.2MHz) ASS1093 C8222, C8307, C8771, C8907, C8908 CEAT470M16
C8910 CEAT470M16
C8631, C8632 CEAT470M50

E IF/AF ASSY (XWZ3726) C8312

C5433
CEAT4R7M50

CEJQR22M50
SEMICONDUCTORS C8220 CKSRYB102K50
IC8111, IC8801 AN4558NS C5505, C5508, C5516-C5518, C5712 CKSRYB103K50
IC8301 BA3838F C5962, C8101, C8103, C8107, C8108 CKSRYB103K50
IC8101 BU4052BCF C8203-C8205, C8218, C8313 CKSRYB103K50
IC8602 BU4066BCF D
IC5591, IC5801 BU4094BCF C8713, C8714, C8733, C8735, C8828 CKSRYB103K50
C8830, C8912 CKSRYB103K50
IC8201 M65847AFP C5639, C5964, C5965, C5967 CKSRYB104K16
IC8601, IC8624, IC8701-IC8703 NJM4558MD C8613, C8614, C8623, C8624 CKSRYB104K16
IC5501 PDC108A C5507, C5515, C5591, C5802, C5960 CKSRYB104K25
Q5801, Q5804 2SB1132
Q5502, Q5503, Q5701, Q8111-Q8114 2SC4081 C8301-C8303, C8763, C8764 CKSRYB104K25
C8219 CKSRYB122K50
Q8201 2SD1858X C8703, C8704, C8709, C8710, C8725 CKSRYB152K50
> Q8771 2SD2012 C8731 CKSRYB152K50
Q5711, Q8501, Q8502, Q8621, Q8622 2SD2114K C5961, C8214, C8215, C8304 CKSRYB224K16
Q8719, Q8720, Q8743, Q8745 2SD2114K
Q5402 2SJ103 C8605, C8606, C8753, C8754 CKSRYB331K50 E
C8726 CKSRYB332K50
Q5803, Q8115, Q8116, Q8503, Q8623 DTA124EUA C8217, C8516, C8517, C8705, C8706 CKSRYB471K50
Q8625, Q8762 DTA124EUA C8216 CKSRYB472K50
Q8624, Q8626 DTC124EUA C8202, C8223, C8306, C8772 CKSRYB473K25
Q5501, Q5802, Q5805, Q5807, Q5808 DTC143EUA
Q5607 RN2901 C8207-C8209 CKSRYB683K25
C8607, C8608, C8727, C8757, C8758 CKSRYB821K50
D5502, D5703, D5711 1SS133 C8206 CKSRYB822K50
D5716, D5801, D5952, D5954, D8501 1SS355
D8701, D8702 1SS355 RESISTORS
D5715 MTZJ11C R5802, R5804, R5807, R8216 RD1/4PU102J
D5955, D8201, D8901, D8902 MTZJ5.6B R8637, R8638, R8901, R8904 RD1/4PU102J
F
R5636 RD1/4PU223J
D8601, D8602 MTZJ6.8B R5637 RD1/4PU473J
D5901 UDZS15B R5903-R5906 RS1/16S1500F

XV-EV61 89
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
R5901 RS1/16S75R0F
Other Resistors RS1/16S###J C5506, C8773 CEAT1R0M50
A C5608, C5610 CEAT220M25
OTHERS C5716 CEAT220M50
CN5503 11P FFC CONNECTOR 52045-1145 C8305, C8308-C8310 CEAT2R2M50
CN5501 12P FFC CONNECTOR 52045-1245 C5963, C5966, C5968, C8201, C8213 CEAT470M16
CN5701 13P FFC CONNECTOR 52045-1345
CN8303 30P FFC CONNECTOR 52045-3045 C8222, C8307, C8771, C8907, C8908 CEAT470M16
CN5105 5P JUMPER CONNECTOR 52147-0510 C8910 CEAT470M16
C8312 CEAT4R7M50
CN8302 15P JUMPER CONNECTOR 52147-1510 C5433 CEJQR22M50
CN8401 4P PIN JACK AKB7015 C5805, C5806, C8220 CKSRYB102K50
JA5903 COMB. JACK AKB7146
CN5505 13P PLUG AKP7059 C5505, C5508, C5516-C5518, C5712 CKSRYB103K50
CN5801 17P PLUG AKP7061 C5962, C8101, C8103, C8107, C8108 CKSRYB103K50
B C8203-C8205, C8218, C8313 CKSRYB103K50
CN5506, CN5507 19P PLUG AKP7062 C8623, C8624, C8828, C8830, C8912 CKSRYB103K50
X5501 CRYSTARL RESO. ASS7034 C5964, C5965, C5967, C8763, C8764 CKSRYB104K16
CN5502 7P FFC CONNECTOR HLEM7S-1
0-3 PCB BUNDER VEF1040 C5507, C5515, C5802, C5960 CKSRYB104K25
CN5905 18P FFC CONNECTOR VKN1249 C8301-C8303 CKSRYB104K25
C8219 CKSRYB122K50
CN5903 30P FFC CONNECTOR VKN1261 C5961, C8214, C8215, C8304 CKSRYB224K16
CN5902 7P CONNECTOR VKN1267 C8217, C8516, C8517 CKSRYB471K50

C8216 CKSRYB472K50

E IF/AF ASSY(XWZ3733)
C8202, C8223, C8306, C8772 CKSRYB473K25
C8207-C8209 CKSRYB683K25
C C8206 CKSRYB822K50
SEMICONDUCTORS
IC8111, IC8801 AN4558NS RESISTORS
IC8301 BA3838F R5802, R5804, R5807, R8216, R8901 RD1/4PU102J
IC8101 BU4052BCF R8904 RD1/4PU102J
IC5801 BU4094BCF R5636 RD1/4PU223J
IC8201 M65847AFP R5637 RD1/4PU473J
R5903-R5906 RS1/16S1500F
IC5501 PDC109A
Q5801, Q5804 2SB1132 R5901 RS1/16S75R0F
Q5502, Q5503, Q5701, Q8111, Q8112 2SC4081 Other Resistors RS1/16S###J
Q8201 2SD1858X
> Q8771 2SD2012 OTHERS
D CN5503 11P FFC CONNECTOR 52045-1145
Q5711, Q8501, Q8502 2SD2114K CN5501 12P FFC CONNECTOR 52045-1245
Q5402 2SJ103 CN5701 13P FFC CONNECTOR 52045-1345
Q5803, Q8115, Q8503 DTA124EUA CN8303 301P FFC CONNECTOR 52045-3045
Q5501, Q5802, Q5805, Q5807, Q5808 DTC143EUA CN5105 5P JUMPER CONNECTOR 52147-0510
Q5607 RN2901
CN8302 15P JUMPER CONNECTOR 52147-1510
D5502, D5703, D5711 1SS133 CN8401 4P PIN JACK AKB7015
D5716, D5801, D5952, D5954, D8501 1SS355 JA5903 COMB. JACK AKB7146
D8701, D8702 1SS355 CN5801 17P PLUG AKP7061
D5715 MTZJ11C X5501 CRYSTARL RESO. ASS7034
D5955, D8201, D8901, D8902 MTZJ5.6B
CN5502 7P FFC CONNECTOR HLEM7S-1
E D5901 UDZS15B 0-3 PCB BUNDER VEF1040
COILS AND FILTERS CN5904 10P FFC CONNECTOR VKN1242
L5501 LAU220J CN5903 30P FFC CONNECTOR VKN1261
L5901 VTL1086 CN5902 7P CONNECTOR VKN1267

CAPACITORS D8901, D8902 MTZJ6.8B

D8601, D8602 UDZS6.8B
C5501 (0.047F/5.5V) ACH1246
C5504, C8212 CCSRCH101J50
C5801, C8401, C8402 CCSRCH221J50
C5903, C5904, C5906 CCSRCH470J50 Mark No. Description Part No.
C5511, C5715, C5718, C5719 CEAT100M50

F C5803, C5804, C8115, C8116

C8121, C8122, C8221, C8509, C8510
CEAT100M50
CEAT100M50 D DECK ASSY(XWZ3072)
C8833, C8834 CEAT100M50
C5502 CEAT101M10 SEMICONDUCTORS
C5901, C5902 CEAT102M6R3 IC2202, IC2301, IC2401 BA4558F-HT

90 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
IC2201 HA12136AF RESISTORS
Q2254 2SA1037K R2805 RD1/2VM161J
Q2801, Q2802, Q2805 2SC1815 R2803 RD1/2VM4R7J A
Q2806 2SC2240 VR2301, VR2302, VR2401, VR2402 PCP1028
VR2801, VR2802 PCP1032
Q2251-Q2253 2SC2412K Other Resistors RS1/16S###J
Q2261, Q2262, Q2451, Q2452 2SD2114K
Q2301, Q2302 2SK373 OTHERS
Q2351, Q2460 DTA124EK CN2506 17P SOCKET AKP7072
Q2303, Q2304 DTC114TK CN2302 CONNECTOR POST B2B-PH-K
CN2507 3P CONNECTOR B3P-SHF-1AA
Q2255, Q2352, Q2353, Q2453 DTC124EK CN2301 KR CONNECTOR B4B-PH-K
Q2263 DTC143EK
D2256, D2301-D2306 1SS133
D2252-D2255, D2307
D2201
1SS355
MTZJ6.2A
I DISP1 ASSY B
SEMICONDUCTORS
COILS AND FILTERS Q5110 DTC143EUA
L2802 LFA121J D5110 SLR-343MC
L2801 RTD1082
L2401, L2402 RTF1004
L2403, L2404 RTF1021
COILS AND FILTERS
L5101 LAU220J
F2201, F2202 RTF1217

CAPACITORS SWITCHES AND RELAYS

S5101-S5108 VSG1009
C2809 CCCSL151K2H
C2301, C2302 CCSRCH100D50
C2423, C2424 CCSRCH221J50 CAPACITORS
C2253 CCSRCH271J50 C5105 CCSRCH100D50 C
C2256, C2257, C2321-C2324 CCSRCH470J50 C5106 CCSRCH220J50
C5103 CEAL470M16
C2401, C2402 CCSRCH470J50 C5101 CKSRYB102K50
C2303, C2304 CCSRCH681J50 C5104 CKSRYB104K16
C2807 CEAL470M6R3
C2203, C2204, C2207, C2311, C2312 CEAT100M50 RESISTORS
C2215 CEAT101M16 R5210 RD1/4PU271J
Other Resistors RS1/16S###J
C2201, C2202, C2217, C2218, C2255 CEAT1R0M50
C2404, C2419, C2420 CEAT1R0M50 OTHERS
C2251 CEAT220M50 0 4P CABLE HOLDER 51048-0400
C2216 CEAT221M16 CN5101 12P FFC CONNECTOR 52044-1245
C2254 CEAT2R2M50 CN5102 8P JUMPER CONNECTOR 52151-0810 D
CN5104 10P FFC CONNECTOR 52492-1020
C2309, C2310, C2407, C2408 CEAT330M50

H DISP2 ASSY
C2425 CEAT470M16
C2261, C2262 CEAT4R7M50
C2208 CEATR10M50
C2205, C2206 CEATR22M50 SEMICONDUCTORS
Q5201, Q5203 2SC2412K
C2403 CEJQ1R0M50 D5215, D5216 1SS355
C2805, C2806, C2810 CEJQ330M10 D5207 NSPBF50S-3026
C2314 CEJQ470M16 D5203 NSPW500BS-2146
C2315 CKSRYB102K50 D5209, D5217 NSPWF50BS-9706
C2231 CKSRYB103K50
E
D5202, D5211, D5213 UDZS6.8B
C2431, C2432 CKSRYB122K50
C2211, C2212 CKSRYB152K50
C2252 CKSRYB334K10
SWITCHES AND RELAYS
S5201-S5207 VSG1009
C2808 CQHA822J2A
C2801 CQMA123J50
CAPACITORS
C2421, C2422 CQMA152J50 C5204 CEAL101M10
C2409, C2410 CQMA223J50 C5202 CKSRYB103K50
C2803, C2804 CQMA472J50
C2802 CQMA682J50 RESISTORS
C2209, C2210 CQMBA103J50 R5213 RD1/4PU101J
Other Resistors RS1/16S###J
C2307, C2308 CQMBA682J50 F
C2405, C2406 CQMBA683J50 OTHERS
0 8P CABLE HOLDER 51048-0800
J5102 8P WIRE D20PYY0805E

XV-EV61 91
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
5201 REMOTE CONTROL UNIT GP1UM28XK
RESISTORS
A
G DISP3 ASSY Other Resistors

OTHERS
RS1/16S###J

SEMICONDUCTORS 0 4P CABLE HOLDER 51048-0400

D5302 NSPW500BS-2146 3901 MINI JACK AKN7003
D5301 UDZS6.8B J3902 4P WIRE D20PYY0410E

SWITCHES AND RELAYS

S5301-S5309 VSG1009 K EVOL ASSY(XWZ3736)
RESISTORS SEMICONDUCTORS
Other Resistors RS1/16S###J > IC3101 AEK7021
IC3071, IC3072 AN4558NS
B
OTHERS IC3062 BD3814FV
0 4P CABLE HOLDER 51048-0400 IC3055-IC3058 NJM4558MD
J5103 4P WIRE D20PYY0420E IC3901 NJM4560M

> IC3951
J
NJM7812FA
MIC ASSY (XWZ3730) Q3909 2SA1576A
Q3751, Q3752 2SC4081
SEMICONDUCTORS Q3901, Q3902, Q3905, Q3906 2SD2114K
IC5401 M65855FP Q3351, Q3352 2SK368
IC5402 NJM4558MD
Q5401 DTA143EUA Q3753, Q3754, Q3903 DTA124EUA
D5401 MTZJ5.1B D3755, D3756 1SS133
D3753, D3754 1SS355
C D3901 DAP202K
COILS AND FILTERS D3796 MTZJ3.3B
L5401 LAU100J
D3052, D3053 UDZS6.8B
CAPACITORS
C5419, C5427, C5428 CCSRCH101J50 CAPACITORS
C5423 CCSRCH102J50 C3129-C3133, C3913, C3914 CCSRCH101J50
C5409 CEAL220M16 C3168, C3909, C3910 CCSRCH470J50
C5416, C5422, C5426 CEAL2R2M50 C3189 CEAL100M16
C5431, C5432 CEAL4R7M50 C3906, C3918 CEAL100M50
C3951 CEAL1R0M50
C5401 CEJQ101M16
C5421 CEJQ2R2M50 C3954 CEAL470M16
D C5420 CEJQ470M16 C3753, C3754 CEALR47M50
C5410 CEJQR47M50 C3063, C3064, C3095, C3096 CEAT100M50
C5404, C5408, C5411, C5430 CKSRYB103K50 C3173, C3174, C3190, C3917 CEAT100M50
C3923, C3924 CEAT100M50
C5402, C5412, C5429, C5436 CKSRYB104K25
C5414 CKSRYB122K50 C3925, C3926 CEAT101M16
C5405 CKSRYB123K50 C3795 CEAT101M63
C5406 CKSRYB472K50 C3955 CEAT102M25
C5407 CKSRYB473K25 C3111, C3112, C3197, C3198 CEAT1R0M50
C3757, C3758 CEAT1R0M50
RESISTORS
R5401 RD1/4PU681J C3113, C3114 CEAT221M10
VR5401 XCS3007 C3149, C3911, C3912 CEAT470M16
E Other Resistors RS1/16S###J C3150 CEJQ470M16
C3901, C3902 CKSRYB102K50
OTHERS C3115, C3116, C3147, C3148 CKSRYB103K50
0 5P CABLE HOLDER 51048-0500
J5401 5P WIRE D20PYY0545E C3171, C3172 CKSRYB103K50
JA5401, JA5402 MIC JACK XKN3012 C3159, C3160, C3169, C3170 CKSRYB104K16
C3180, C3181, C3186, C3796 CKSRYB104K16

O HP ASSY C3121-C3124, C3915, C3916

C3283
CKSRYB104K25
CKSRYB123K50

COILS AND FILTERS C3138 CKSRYB152K50

L3901, L3902 VTL1096 C3223, C3224 CKSRYB153K50
F C3182 CKSRYB224K16
CAPACITORS C3235, C3236 CKSRYB273K16
C3905 CKSRYB103K50 C3267, C3268 CKSRYB332K50
C3903, C3904 CKSRYB473K25
C3176, C3183, C3279 CKSRYB333K25
92 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
C3125, C3126, C3755, C3756 CKSRYB472K50 C3567, C3665, C3667 CKSRYB473K50
C3177, C3179 CKSRYB473K25 C3369, C3370, C3469, C3470,C3569 XCG3008
C3255, C3256 CKSRYB822K50 C3669 XCG3008 A

RESISTORS RESISTORS
R3118, R3119 RD1/2PM151J R3607, R3608, R3617,R3618 ACN7112
R3757, R3758 RD1/4PU103J R3627, R3628 (0.1ohm, 2W) ACN7112
R3164, R3177, R3206 RD1/4PU220J R3361, R3362, R3461, R3462, R3561 RD1/2PMF101J
R3796 RD1/4PU223J R3661 RD1/2PMF101J
R3901, R3902, R3911, R3912 RD1/4PU330J R3668 RD1/4PU223J

Other Resistors RS1/16S###J R3634 RD1/4PU272J

R3635 RD1/4PU332J
OTHERS R3631, R3632 RD1/4PU472J
0 4P CABLE HOLDER 51048-0400 R3633 RD1/4PU682J
CN3011 16P FFC CONNECTOR 52044-1645 R3365-R3368, R3465-R3468 RS1/10S220J B
CN3001 30P FFC CONNECTOR 52044-3045
CN3008 4P JUMPER WIRE 52151-0410 R3565, R3566, R3665, R3667 RS1/10S220J
CN3012 13P JUMPER WIRE 52151-1310 Other Resistors RS1/16S###J

CN3003 20P CONNECTOR PLUG AKM7074 OTHERS

CN3006 7P CONNECTOR SOCKET AKP7149 CN3307 7P CONNECTOR PLUG AKM7061
CN3007 12P CONNECTOR SOCKET AKP7154 CN3305 12P CONNECTOR AKM7066
J3009 4P WIRE D20PYY0425E JA3301 12P SPEAKER TERMINAL XKE3022
J3002 15P WIRE D20PYY1520E

3001 SCREW TERMINAL VNE1948 P PRIMARY ASSY

N SP-TERMINAL ASSY(XWZ3737) SEMICONDUCTORS C
> IC5508 NJM78M56FA
Q81 2SD1858X
SEMICONDUCTORS Q80 DTC124EK
Q3639 2SA1576A D87-D89 1SS133
Q3601, Q3602, Q3611, Q3612 2SC4081 D80 DF06SA
Q3621, Q3622, Q3631, Q3637, Q3638 2SC4081
Q3642, Q3644 2SC4081 COILS AND FILTERS
Q3641 2SD1858X > L1 XTF3003

Q3635 DTA124EUA SWITCHES AND RELAYS

Q3645 DTA143EUA
> RY81 ASR7027
Q3636, Q3640 DTC124EUA
Q3633 RN1901 D
Q3632 UMB1N
CAPACITORS
> C1, C3 (0.01/AC275V) ACE7013
D3632-D3634 1SS133 C84 CEAT100M50
D3601, D3602, D3611, D3612 1SS355 C82 CEAT102M25
C83 CEAT1R0M50
D3621, D3622, D3636, D3637 1SS355
C85 CKSRYB103K50
D3641-D3643 1SS355
D3635 DAN202K
RESISTORS
D3644 DAN217 Other Resistors RS1/16S###J
D3603, D3613, D3623 DAP202K
D3631 MTZJ5.1A OTHERS
CN7 4P JUMPER CONNECTOR 52151-0410
E
COILS AND FILTERS H1 - H6 FUSE CLIP AKR7001
L3361, L3362, L3461, L3462 ATH-959 > T2 SUB TRANS FORMER ATT7080
L3661 ATH-059 CN1 2P-VH CONNECTOR B2P3-VH
CN2 4P-VH CONNECTOR B4P7-VH
SWITCHES AND RELAYS
0 PCB BINDER VEF1040
RY3641-RY3643 ASR7008
> AN1 1P AC INLET XKP3041
> S1 VOLTAGE SELECTOR XKX3001
CAPACITORS
C3631 CEAL2R2M50
C3633 CEAT100M50
C3632
C3668
CEAT471M6R3
CKSRYB103K50
Q SECONDARY ASSY
C3361-C3364, C3461-C3464 CKSRYB223K50 F
SEMICONDUCTORS
C3561-C3564 CKSRYB223K50 > IC41 (7A) AEK7021
D11, D21, D41 D5SBA20(B)
C3365-C3368, C3465-C3468, C3565 CKSRYB473K50

XV-EV61 93
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
CAPACITORS TH111 NCP18WF104J03RB
C21, C22 (4700uF/35) ACH7166
A C41 CEAT682M25 CAPACITORS
C9011, C9021, C9041 CQMA333K2E C3305, C3306, C3405, C3406 CCSRCH221J50
C11, C12 (2200uF/63) XCH3020 C3505, C3506, C62, C97 CCSRCH221J50
C3309, C3310, C3409, C3410 CCSRCJ3R0C50
OTHERS C3509, C3510 CCSRCJ3R0C50
CN3 20P CONNECTOR AKP7162 C3307, C3308, C3407, C3408, C3508 CEAL100M16
CN4 7P-VE CONNECTOR B7P-VH
0 PCB BINDER VEF1040 C3507 CEAL470M6R3
C72 CEAT100M50

L TRADE ASSY(XWZ3740)
C3651 CEAT101M25
C101, C102 CEAT1R0M50
C3323, C3324, C3423, C3424 CEAT221M50
RESISTORS
B C3167, C3168, C3178, C3179 CEAT2R2M50
Other Resistors RS1/16S###J
C3301, C3302, C3317, C3318 CEAT2R2M50
C3401, C3402, C3501, C3502 CEAT2R2M50
OTHERS C3652, C63, C82, C98 CEAT470M25
0 13P CABLE HOLDER 51048-1300
C3653 CEAT470M35
CN3031 16P FFC CONNECTOR 52045-1645
CN3021, CN3022 23P SOCKET AKP7075
C3303, C3304, C3403, C3404 CKSRYB102K50
J3032 13P WIRE D20PYY1315E
C3503, C3504 CKSRYB102K50
J3033 14P WIRE D20PYY1415E
C92 CKSRYB104K16
C71, C81 CKSRYB473K50

M MOD.AMP ASSY(AWM7720) RESISTORS

R3317-R3320, R3417-R3420 ACN7122
C SEMICONDUCTORS R3517-R3520 (0.22ohm, 2W) ACN7122
> IC81 NJM7805FA
> R3327, R3328, R3427, R3428 RD1/4MUF470J
> IC71 NJM7912FA R3387, R3388 RD1/4PU101J
> IC3301, IC3401 STK402-270 R3657 RD1/4PU330J
Q3382, Q43 2SA1576A
Q62 2SB1237X R96, R97 RS1/16S1002F
> R3323, R3324, R3351, R3423, R3424 RS1/16S1R0J
Q111, Q3381, Q63, Q92 2SC4081
> R3451 RS1/16S1R0J
> Q61 2SD2012 R67, R68 RS1/16S2201F
Q3301, Q3302, Q3401, Q3402 2SD2114K R94, R95 RS1/16S2701F
Q3501, Q3502, Q3504 2SD2114K
Q3654 2SD2144S
> R62 RS1/16S330J
R65 RS1/16S4700F
D Q107, Q3653 DTA124EUA R47, R48 RS1/16S4701F
Q3652 DTA124TK Other Resistors RS1/16S###J
Q106 DTC124EUA
> Q3383, Q91 IRFI9Z34G
OTHERS
> Q3384 IRFIZ34G
CN3001, CN3002 23P PLUG AKP7064
CN3651 PLUG(2P) KM200SA2
Q3651 RN1901
Q101, Q103 UMB1N
Q102, Q104
> D3321-D3326
UMH1N
1SR139-400 B DVD MAIN ASSY(AWM7808)
D3327, D3328 1SR139-400
SEMICONDUCTORS
> D3421-D3426 1SR139-400 IC602 K4S641632F-TC75
D3427, D3428 1SR139-400 IC101 M63018FP
E
D3387, D3388, D3651-D3655 1SS133 > IC431 MM1565AF
D101, D102, D104, D3657, D42 1SS355 IC501 MM1623AF
> D3391, D3392 30PDA20-FC6 > IC421 PQ018EH01ZP

> D3381, D3382, D3481, D3482 DAN217 > IC411 PQ018EZ01ZP

> D3581, D3582 DAN217 > IC441 PQ20WZ11
D3389, D3390 MTZJ10C > IC401 R1224N102H
> D98 MTZJ11B IC601 STM5589CVA
> D72 MTZJ15C IC301 STM6316ATXXA

D3393, D3394 MTZJ18B/C IC911 TC74VHC08FT

> D63 MTZJ18C IC901 TC74VHCT125AFT
F D3385, D3386 MTZJ36A IC604 TC7WU04FU
> D82 MTZJ7.5C IC603 VYW2096
D91 UDZS18B Q390 2SA1576A

D105, > Q451 2SA1576A

94 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
Q923, Q924, Q926 2SA1576A
Q202, Q212, Q452 2SC4081 RESISTORS
> Q401 CPH6314 R201 RAB4C220J A
Q921 DTA124EUA R211 RAB4C390J
R100, R1011-R1013, R111, R210 RS1/10S0R0J
Q951 DTC114TUA R387–R389, R412–R415, R417 RS1/10S0R0J
Q724, Q977 DTC114YUA R421, R422, R561, R600, R623 RS1/10S0R0J
Q922, Q925 DTC124EUA
Q201, Q211 HN1A01F R403 RS1/10S100J
Q911 RN1903 R105, R106, R115–R120 RS1/10S4R7J
R104, R107 RS1/10S6R8J
Q603 RN4982 R125, R144, R330, R331, R628 RS1/16S1002F
D431, D432 1SR154-400 R635 RS1/16S1002F
D402, D403, D922–D927 1SS355
D401 RB051L-40 R301 RS1/16S1202F
D603 RB501V-40 R502, R512, R522, R532, R542 RS1/16S1500F B
R552 RS1/16S1500F
D921 UDZS4.7B R408 RS1/16S1502F
R410 RS1/16S1802F
COILS AND FILTERS
L401 ATH7011 R443 RS1/16S2001F
L402 CTH1254 R409 RS1/16S2702F
L390 LCYA2R7J2520 R441 RS1/16S4701F
L1056-L1061 VTL1078 R101, R102, R123, R142, R143 RS1/16S5600F
R442 RS1/16S6801F
CAPACITORS
C408 CCSRCH121J50 R411 RS1/8S0R0J
C390 CCSRCH180J50 Other Resistors RS1/16S###J
C142 CCSRCH221J50 C
C200 CCSRCH331J50 OTHERS
C690 CCSRCH470J50 CN104 4P CONNECTOR AKN7035
CN105 12P FFC CONNECTOR RKN1053
C392 CCSRCH560J50
C393, C640, C644 CCSRCH7R0D50 CN103 PH FFC CONNECTOR S5B-PH-SM3
C452 CEV100M16 0 FLEXIBLE CABLE VDA1681
C101, C401, C404, C410,C412 CEV101M16 CN903 18P FFC CONNECTOR VKN1310
C422, C443, C561, C564,C600 CEV101M16 CN901 30P FFC CONNECTOR VKN1322
CN101 24P CONNECTOR VKN1482
C621, C660 CEV101M16
C415, C425 CEV101M4 X601 RESO. (27MHz) VSS1172
C201, C211 CEV470M16 X301 RESO. (20MHz) VSS1186
C406 CKSQYB104K25 D
C431

C433
CKSQYB105K16

CKSQYB225K10
F DSP ASSY (EV61 Only)
C127, C128, C381, C562, C563 CKSRYB102K50 SEMICONDUCTORS
C624 CKSRYB102K50 IC8201 AK4114VQ
C112-C114, C124, C125, C130 CKSRYB103K50 IC8401 AK4628VQ
C133, C134, C355 CKSRYB103K50 IC8501 DSPD56367PV150
IC8901 NJM2391DL1-33
C102, C132, C139, C230 CKSRYB104K16 IC8902 NJU7223DL1-18
C232, C233, C300, C307, C309 CKSRYB104K16
C315, C318, C323, C326, C335 CKSRYB104K16 IC8701 TC74LVX244FT
C342, C348, C357, C362, C373 CKSRYB104K16 IC8702 TC74VHCT244AFT
C377, C388, C391, C413, C414 CKSRYB104K16 IC8502 TC7WU04FU E
Q8504 UMD2N
C423, C424, C441, C442, C451 CKSRYB104K16 Q8503 UN5112
C511, C531, C551, C565, C571 CKSRYB104K16
C604, C607, C614, C619 CKSRYB104K16 D8501 1SS355
C622, C623, C626–C632 CKSRYB104K16 D8401 DAN202K
C636, C637, C641, C647–C649 CKSRYB104K16 D8402, D8502, D8503 DAP202K

C659, C664, C671, C681, C684 CKSRYB104K16 COILS AND FILTERS

C694, C698, C902, C912, C921 CKSRYB104K16 L8002, L8004, L8501,L8502 ATL7002
C501, C521, C541, C603, C620 CKSRYB105K10 L8201, L8203, L8204, L8401, L8402 QTL1013
C625 CKSRYB105K10 L8504, L8702 QTL1013
C394 CKSRYB152K50 X8501 RESO.(20MHz) VSS1171 F
X8201 RESO. (24.576MHz) XSS3003
C126, C346 CKSRYB223K50
C202, C205, C212, C215 CKSRYB472K50
C402, C403, C405, C409 (10u/25) DCH1165
CAPACITORS
C8209, C8210 CCSRCH100D50
XV-EV61 95
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
C8421 CCSRCH101J50 D3389, D3390 MTZJ10C
C8007, C8008, C8201, C8212, C8214 CCSRCH471J50 > D98 MTZJ11B
A C8404, C8409-C8414, C8416, C8417 CCSRCH471J50
C8419, C8505, C8507, C8509 CCSRCH471J50 > D72 MTZJ15C
D3393, D3394 MTZJ18B/C
C8511, C8512, C8515, C8518, C8520 CCSRCH471J50 > D63 MTZJ18C
C8522, C8524, C8526, C8528, C8530 CCSRCH471J50 D3385, D3386 MTZJ36A
C8532, C8534, C8536, C8539, C8541 CCSRCH471J50 > D82 MTZJ7.5C
C8543, C8545, C8551, C8703, C8706 CCSRCH471J50
C8548, C8549 CCSRCH8R0D50 D91 UDZS18B
D105, D106, D3658 UDZS7.5B
C8701, C8704 CEV100M16 TH111 NCP18WF104J03RB
C8406, C8415, C8546, C8547, C8902 CEV101M16
C8904 CEV101M16 CAPACITORS
C8217, C8225, C8408 CEV470M6R3 C3305, C3306, C3506, C62, C97 CCSRCH221J50
B C8204, C8555 CKSRYB102K50 C3309, C3310, C3510 CCSRCJ3R0C50
C3307, C3308, C3508 CEAL100M16
C8009, C8405, C8418, C8517, C8554 CKSRYB103K50 C72 CEAT100M50
C8010, C8202, C8207, C8213, C8215 CKSRYB104K16 C3651 CEAT101M25
C8407, C8420, C8422, C8504, C8513 CKSRYB104K16
C8521, C8523, C8525, C8527, C8529 CKSRYB104K16 C101, C102 CEAT1R0M50
C8531, C8533, C8535, C8537, C8538 CKSRYB104K16 C3323, C3324 CEAT221M50
C3179, C3301, C3302, C3317, C3318 CEAT2R2M50
C8540, C8542, C8544, C8550, C8702 CKSRYB104K16 C3502 CEAT2R2M50
C8705, C8901, C8903 CKSRYB104K16 C3652, C63, C82, C98 CEAT470M25
C8516 CKSRYB105K6R3
C8514 CKSRYB333K16 C3653 CEAT470M35
C8203 CKSRYB473K50 C3303, C3304, C3504 CKSRYB102K50
C C92 CKSRYB104K16
RESISTORS C71, C81 CKSRYB473K50
R8506 RAB4C101J
R8201 RS1/16S1802F RESISTORS
Other Resistors RS1/16S###J R3317-R3320, R3518, R3520 ACN7122
> R3327, R3328 RD1/4MUF470J
OTHERS R3387, R3388 RD1/4PU101J
CN8003 13P SOCKET AKP7070 R3657 RD1/4PU330J
CN8007, CN8011 19P SOCKET AKP7073 R96, R97 RS1/16S1002F
8101 SCREW TERMINAL VNE1948
> R3323, R3324, R3351 RS1/16S1R0J
R67, R68 RS1/16S2201F

D
M 3CH AMP ASSY (AWM7787) R94, R95
> R62
R65
RS1/16S2701F
RS1/16S330J
RS1/16S4700F
SEMICONDUCTORS
> IC81 NJM7805FA R47, R48 RS1/16S4701F
> IC71 NJM7912FA Other Resistors RS1/16S###J
> IC3301 STK402-270
Q3382, Q43 2SA1576A OTHERS
Q62 2SB1237X CN3001, CN3002 23P PLUG AKP7064
CN3651 2P PLUG KM200SA2
Q111, Q3381, Q63, Q92 2SC4081
> Q61
Q3301, Q3302, Q3502, Q3504
Q3654
2SD2012
2SD2114K
2SD2144S
B DVDM ASSY (AWM7809)
E
Q107, Q3653 DTA124EUA SEMICONDUCTORS
IC602 K4S641632F-TC75
Q3652 DTA124TK IC101 M63018FP
Q106 DTC124EUA > IC431 MM1565AF
> Q3383, Q91 IRFI9Z34G IC501 MM1623AF
> Q3384 IRFIZ34G IC701 PCM1742KE
Q3651 RN1901
> IC421 PQ018EH01ZP
Q101, Q103 UMB1N > IC411 PQ018EZ01ZP
Q102, Q104 UMH1N > IC441 PQ20WZ11
> D3321-D3326 1SR139-400 > IC401 R1224N102H
D3327, D3328 1SR139-400 IC601 STM5589CVA
D3387, D3388, D3651-D3655 1SS133
F
IC301 STM6316ATXXA
D101, D102, D104, D3657, D42 1SS355 IC911 TC74VHC08FT
> D3391, D3392 30PDA20-FC6 IC901 TC74VHCT125AFT
> D3381, D3382, D3582 DAN217 IC604 TC7WU04FU
96 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
IC603 VYW2096 C501, C521, C541, C603, C620 CKSRYB105K10

Q390 2SA1576A C625 CKSRYB105K10 A

> Q451 2SA1576A C394 CKSRYB152K50
Q723, Q923, Q924, Q926 2SA1576A C126, C346 CKSRYB223K50
Q202, Q212, Q452 2SC4081 C202, C205, C212, C215 CKSRYB472K50
Q725, Q726 2SD2114K C402, C403, C405, C409 (10u/25) DCH1165

> Q401 CPH6314 RESISTORS

Q921 DTA124EUA R201 RAB4C220J
Q951 DTC114TUA R211 RAB4C390J
Q721, R100, R1011-R1013, R111, R210 RS1/10S0R0J
Q922, Q925 DTC124EUA R387-R389, R412-R415, R417 RS1/10S0R0J
R421, R422, R561, R600, R623 RS1/10S0R0J
Q201, Q211 HN1A01F
Q911 RN1903 R403 RS1/10S100J B
Q603 RN4982 R105, R106, R115-R120 RS1/10S4R7J
D431, D432 1SR154-400 R104, R107 RS1/10S6R8J
D402, D403, D922-D927 1SS355 R125, R144, R330, R331, R628 RS1/16S1002F
R635 RS1/16S1002F
D401 RB051L-40
D603 RB501V-40 R301 RS1/16S1202F
D921 UDZS4.7B R502, R512, R522, R532, R542 RS1/16S1500F
R552 RS1/16S1500F
COILS AND FILTERS R408 RS1/16S1502F
L401 ATH7011 R410 RS1/16S1802F
L402 CTH1254
L390 LCYA2R7J2520 R443 RS1/16S2001F
L1056-L1058 VTL1078 R409 RS1/16S2702F C
R441 RS1/16S4701F
CAPACITORS R101, R102, R123, R142, R143 RS1/16S5600F
C733, C734 CCSRCH102J50 R442 RS1/16S6801F
C408 CCSRCH121J50
C390 CCSRCH180J50 R411 RS1/8S0R0J
C142 CCSRCH221J50 Other Resistors RS1/16S###J
C200 CCSRCH331J50
OTHERS
C690 CCSRCH470J50 CN104 4P CONNECTOR AKN7035
C392 CCSRCH560J50 CN105 12P FFC CONNECTOR RKN1053
C393, C640, C644 CCSRCH7R0D50
C452, C731,C732 CEV100M16 CN103 PH CONNECTOR S5B-PH-SM3
C101, C401, C404, C410,C412 CEV101M16 0 FLEXIBLE CABLE VDA1681 D
CN902 11P FFC CONNECTOR VKN1303
C422, C443, C561,C564,C600 CEV101M16 CN901 30P FFC CONNECTOR VKN1322
C621, C660, C705,C706 CEV101M16 CN101 24P CONNECTOR VKN1482
C415, C425, C702 CEV101M4
C201, C211 CKSQYB104K25 X601 RESO. (27MHz) VSS1172
C406 CKSQYB104K25 X301 RESO. (20MHz) VSS1186

C431
C433
C127, C128, C381, C562, C563
CKSQYB105K16
CKSQYB225K10
CKSRYB102K50
D DECK ASSY(XWZ3073)
C624 CKSRYB102K50 SEMICONDUCTORS
C112-C114, C124, C125, C130 CKSRYB103K50 IC2202, IC2301, IC2401 BA4558F-HT
IC2201 HA12136AF E
C133, C134, C355 CKSRYB103K50 Q2254 2SA1037K
C102, C132, C139, C230 CKSRYB104K16 Q2801,Q2802, Q2805 2SC1815
C232, C233, C300, C307, C309 CKSRYB104K16 Q2806 2SC2240
C315, C318, C323, C326, C335 CKSRYB104K16
C342, C348, C357, C362, C373 CKSRYB104K16 Q2251-Q2253 2SC2412K
Q2261, Q2262, Q2451, Q2452 2SD2114K
C377, C388, C391, C413, C414 CKSRYB104K16 Q2301, Q2302 2SK373
C423, C424, C441, C442, C451 CKSRYB104K16 Q2351, Q2460 DTA124EK
C511, C531, C551, C565, C571 CKSRYB104K16 Q2303, Q2304 DTC114TK
C604, C607, C614, C619 CKSRYB104K16
C622, C623, C626-C632 CKSRYB104K16 Q2255, Q2352, Q2353, Q2453 DTC124EK
Q2263 DTC143EK
C636, C637, C641, C647-C649 CKSRYB104K16 F
D2256, D2301-D2306 1SS133
C659, C664, C671, C681, C684 CKSRYB104K16 D2252-D2255, D2307 1SS355
C694, C698, C703, C704, C707 CKSRYB104K16 D2201 MTZJ6.2A
C709, C902, C912, C921 CKSRYB104K16

XV-EV61 97
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
COILS AND FILTERS D5110 SLR-343MC(NPQ)
L2802 LFA121J
A L2801 OSC COIL RTD1082 COILS AND FILTERS
L2401, L2402 10mH RTF1004 L5101 LAU220J
L2403, L2404 4.7mH RTF1021
F2201, F2202 MPX COIL RTF1217 SWITCHES AND RELAYS
S5101-S5108 VSG1009
CAPACITORS
C2809 CCCSL151K2H CAPACITORS
C2301, C2302 CCSRCH100D50 C5105 CCSRCH100D50
C2423, C2424 CCSRCH221J50 C5106 CCSRCH220J50
C2253 CCSRCH271J50 C5103 CEAL470M16
C2256, C2257, C2321-C2324 CCSRCH470J50 C5101 CKSRYB102K50
C5104 CKSRYB104K16
C2401, C2402 CCSRCH470J50
B C2303, C2304 CCSRCH681J50 RESISTORS
C2807 CEAL470M6R3 R5210 RD1/4PU271J
C2203, C2204, C2207, C2311, C2312 CEAT100M50 Other Resistors RS1/16S###J
C2215 CEAT101M16

C2201, C2202, C2217, C2218, C2255 CEAT1R0M50

OTHERS
0 4P CABLE HOLDER 51048-0400
C2404, C2419, C2420 CEAT1R0M50
CN5101 12P FFC CONNECTOR 52044-1245
C2251 CEAT220M50
CN5102 8P JUMPER CONNECTOR 52151-0810
C2216 CEAT221M16
CN5104 1OP FFC CONNECTOR 52492-1020
C2254 CEAT2R2M50

C
C2309, C2310, C2407, C2408
C2425
CEAT330M50
CEAT470M16 H DISP2 ASSY
C2261, C2262 CEAT4R7M50
C2208 CEATR10M50 SEMICONDUCTORS
C2205, C2206 CEATR22M50 Q5201, Q5203 2SC2412K
D5215, D5216 1SS355
C2403 CEJQ1R0M50 D5207 NSPBF50S-3026
C2805, C2806, C2810 CEJQ330M10 D5203 NSPW500BS-2146
C2314 CEJQ470M16 D5209, D5217 NSPWF50BS-9706
C2315 CKSRYB102K50
C2231 CKSRYB103K50 D5202, D5211, D5213 UDZS6.8B

C2431, C2432 CKSRYB122K50 SWITCHES AND RELAYS

C2211, C2212 CKSRYB152K50 S5201-S5207 VSG1009
C2252 CKSRYB334K10
D C2808 CQHA822J2A CAPACITORS
C2801 CQMA123J50 C5204 CEAL101M10
C5202 CKSRYB103K50
C2421, C2422 CQMA152J50
C2409, C2410 CQMA223J50 RESISTORS
C2803, C2804 CQMA472J50
R5213 RD1/4PU101J
C2802 CQMA682J50 Other Resistors RS1/16S###J
C2209, C2210 CQMBA103J50

C2307, C2308 CQMBA682J50

OTHERS
0 8P CABLE HOLDER 51048-0800
C2405, C2406 CQMBA683J50
J5102 8P WIRE D20PYY0805E
5201 REMOTE CONTROL UNIT GP1UM28XK
RESISTORS
E R2805 RD1/2VM161J
R2803
VR2301, VR2302, VR2401, VR2402
RD1/2VM4R7J
PCP1028
G DISP3 ASSY
VR2801, VR2802 PCP1032
Other Resistors RS1/16S###J
SEMICONDUCTORS
D5302 NSPW500BS-2146
D5301 UDZS6.8B
OTHERS
CN2506 17P SOCKET AKP7072
CN2302 KR CONNECTOR B2B-PH-K
SWITCHES AND RELAYS
S5301-S5309 VSG1009
CN2507 3P TOP POST B3P-SHF-1AA
CN2301 KR CONNECTOR B4B-PH-K
RESISTORS

I DISP1 ASSY
Other Resistors RS1/16S###J
F

OTHERS
SEMICONDUCTORS 0 4P CABLE HOLDER 51048-0400
Q5110 DTC143EUA J5103 4P WIRE D20PYY0420E
98 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.

O HP ASSY > IC3951

Q3909
Q3751, Q3752
NJM7812FA
2SA1576A
2SC4081
A

COILS AND FILTERS Q3901, Q3902, Q3905, Q3906 2SD2114K

L3901, L3902 VTL1096 Q3351, Q3352 2SK368

CAPACITORS Q3753, Q3754, Q3903 DTA124EUA

D3755, D3756 1SS133
C3905 CKSRYB103K50
D3753, D3754 1SS355
C3903, C3904 CKSRYB473K25
D3901 DAP202K
D3796 MTZJ3.3B
RESISTORS
Other Resistors RS1/16S###J
D3052, D3053 UDZS6.8B

OTHERS CAPACITORS B
0 4P CABLE HOLDER 51048-0400 C3129-C3133, C3913, C3914 CCSRCH101J50
3901 MINI JACK AKN7003 C3336, C3337 CCSRCH221J50
J3902 4P WIRE D20PYY0410E C3168, C3909, C3910 CCSRCH470J50

C3906, C3918 CEAL100M50

J MIC ASSY (XWZ3734) C3189, C3197, C3198, C3951

C3954
CEAL1R0M50
CEAL470M16
C3753, C3754 CEALR47M50
SEMICONDUCTORS C3063, C3064, C3173, C3174, C3917 CEAT100M50
IC5401 M65855FP
IC5402 NJM4558MD C3923, C3924 CEAT100M50
Q5401 DTA143EUA C3925, C3926 CEAT101M16
D5401 MTZJ5.1B C3795 CEAT101M63 C
C3955 CEAT102M25
COILS AND FILTERS C3111, C3112, C3190, C3757, C3758 CEAT1R0M50
L5401 LAU100J
C3113, C3114 CEAT221M10
CAPACITORS C3149, C3911, C3912 CEAT470M16
C5419, C5427, C5428 CCSRCH101J50 C3150 CEJQ470M16
C5423 CCSRCH331J50 C3901, C3902 CKSRYB102K50
C5409 CEAL220M16 C3115, C3116, C3147, C3148 CKSRYB103K50
C5416, C5422, C5426 CEAL2R2M50
C5431, C5432 CEAL4R7M50 C3159, C3160, C3170-C3172 CKSRYB103K50
C3334, C3335 CKSRYB103K50
C5401 CEJQ101M16 C3180, C3181, C3183, C3186, C3796 CKSRYB104K16
C5421 CEJQ2R2M50 C3121-C3124, C3340-C3343 CKSRYB104K25 D
C5420 CEJQ470M16 C3915, C3916 CKSRYB104K25
C5410 CEJQR47M50
C5404, C5408, C5411, C5430 CKSRYB103K50 C3138 CKSRYB152K50
C3182 CKSRYB224K10
C5402, C5412, C5429, C5436 CKSRYB104K25 C3176 CKSRYB333K25
C5414 CKSRYB122K50 C3184, C3185 CKSRYB393K25
C5405 CKSRYB123K50 C3125, C3126, C3755, C3756 CKSRYB472K50
C5406 CKSRYB472K50
C5407 CKSRYB473K25 C3177, C3179 CKSRYB473K25

RESISTORS RESISTORS
R5401 RD1/4PU681J R3118, R3119 RD1/2PM151J
VR5401 ROTARY ENCODER XCS3007 R3757, R3758 RD1/4PU103J E
Other Resistors RS1/16S###J R3164, R3177, R3206 RD1/4PU220J
R3796 RD1/4PU223J
OTHERS R3901, R3902, R3911, R3912 RD1/4PU330J
0 5P CABLE HOLDER 51048-0500
Other Resistors RS1/16S###J
J5401 5P WIRE D20PYY0545E
JA5401, JA5402 MIC JACK XKN3012
OTHERS

K EVOL ASSY (XWZ3741)

0 4P CABLE HOLDER 51048-0400
CN3011 12P FFC CONNECTOR 52044-1245
CN3001 30P FFC CONNECTOR 52044-3045
SEMICONDUCTORS CN3008 4P JUMPER WIRE 52151-0410
CN3012 13P JUMPER WIRE 52151-1310
> IC3101 AEK7021 F
IC3071, IC3072 AN4558NS
CN3003 20P CONNECTOR AKM7074
IC3062 BD3814FV
CN3007 12P CONNECTOR SOCKET AKP7154
IC3055-IC3058 NJM4558MD
J3009 4P WIRE D20PYY0425E
IC3901 NJM4560M
XV-EV61 99
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
J3002 15P WIRE D20PYY1520E C9011, C9041 CQMA103K2E
3001 SCREW TERMINAL VNE1948 C9021 CQMA473K2E
A C11, C12 (2200uF/63) XCH3020

N SP-TERMINAL ASSY(XWZ3742) OTHERS

CN3 20P CONNECTOR SOCKET AKP7162
SEMICONDUCTORS CN4 7P-VH CONNECTOR B7P-VH
Q3639 2SA1576A 0 PCB BINDER VEF1040
Q3601, Q3602, Q3621,Q3631 2SC4081
Q3637, Q3644
Q3641
Q3635
2SC4081
2SD1858X
DTA124EUA
L TRADE ASSY(XWZ3745)
RESISTORS
Q3645 DTA143EUA Other Resistors RS1/16S###J
Q3636, Q3640 DTC124EUA
B Q3633 RN1901 OTHERS
Q3632 UMB1N 0 13P CABLE HOLDER 51048-1300
D3632-D3634 1SS133 CN3031 12PFFC CONNECTOR 52045-1245
CN3021, CN3022 23P SOCKET AKP7075
D3601, D3602, D3621, D3636, D3637 1SS355 J3032 13P WIRE D20PYY1315E
D3641, D3642 1SS355 J3033 14P WIRE D20PYY1415E
D3635 DAN202K
D3644 DAN217
D3603, D3623 DAP202K

D3631 MTZJ5.1A

COILS AND FILTERS

C L3361,L3362, L3561 ATH-059

SWITCHES AND RELAYS

RY3641, RY3642 ASR7008

CAPACITORS
C3631 CEAL2R2M50
C3633 CEAT100M50
C3632 CEAT471M6R3
C3668 CKSRYB103K50
C3361-C3364, C3561, C3563 CKSRYB223K50

C3365-C3368, C3565, C3567 CKSRYB473K50

D
C3369,

RESISTORS
R3607,
R3361, R3362, R3561 RD1/2PMF101J
R3668 RD1/4PU223J
R3634 RD1/4PU272J
R3635 RD1/4PU332J

R3631, R3632 RD1/4PU472J

R3633 RD1/4PU682J
R3365-R3368, R3565, R3566 RS1/10S220J
E Other Resistors RS1/16S###J

OTHERS
3603 2P PIN JACK AKB1233
CN3305 12P CONNECTOR PLUG AKM7066
JA3302 6P SPEAKER TERMINAL XKE3023

Q SECONDARY ASSY(XWZ3743)
SEMICONDUCTORS
> IC41 (7A) AEK7021
D11, D21, D41 D5SBA20(B)
F
CAPACITORS
C21, C22 (4700uF/35) ACH7166
C41 CEAT682M25

100 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

6. ADJUSTMENT
6.1 DECK SECTION
6.1.1 Adjustment condition A

7 Adjustment Condition
(1) The ground at the time of adjustment shall be W166. 7 List of Adjustments
(Refer to Fig. 6–3). ¶ Playback Section
(2) Clean the heads and demagnetize them using a head eraser. (1) Tape Speed Confirmation
(3) Set the measurement level to 0 dBV = 1 Vrms. (2) Head Azimuth Adjustment
(4) Use the specified tape for adjustment. Use the labeled (A) side (3) Playback Level Adjustment
of the test tape. B
NCT–111 : For Tape Speed adjustment
NCT-112 : For Playback adjustment ¶ Recording Section
STD–633 : Normal blank tape (1) Recording Bias Adjustment
(2) Recording Level Adjustment
* As the reference recording level is 250 nwb/m for NCT–
112, the recording level will be higher than 4 dB for NCT–
112 (160nwb/m). When adjusting, pay carefully attention PLAY BACK
to the type of tape used.
12.5k
(5) Provide yourself with the following measuring devides: 250 10k
÷ AC millivoltmeter
3dB 3dB 4dB
÷ Low-frequency oscillator
÷ Attenuator C
÷ Oscilloscope
(6) Adjust both right and left channels unless other wise specified.
(7) Turn the DOLBY NR switch off unless otherwize specified.
(8) Warm up the unit for several minutes before adjustment. In RECORDING
particular, be sure to warm up the unit in the REC/PLAY mode
for 3 to 5 minutes before starting recording/playback frequency 12.5k
characteristics adjustment. 250 10k
(9) Always follow the indicated adjustment order.
3dB 3dB 5dB
Otherwise, a complete adjustment may not be achieved.

D
Fig. 6-1 Frequency Characteristics

Dolby noise reduction manufactured under license from Dolby

Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.

0 dB 30s
0 dB: 315 Hz, 250 nwb/m
30 s 30 s 30 s 10s 10s .......................................................................................................... 10s E
315 Hz –20 dB
12.5 6.3 500 250 125
6.3 kHz 10 kHz 315 Hz 14 kHz kHz 10 kHz 8 kHz kHz 4 kHz 2 kHz 1 kHz Hz Hz Hz 63 Hz 40 Hz

Fig. 6-2 Test Tape NCT– 112

XV-EV61 101
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

6.1.2 Playback and Recording section

A
7 Playback Section
(1) Tape Speed Confirmation
No. Mode Input Signal/Test Tape Adjustment Points Measurement Points Adjustment Value Remarks

VR2701 (DECK ASSY) P1 R (CN2507) +10

FWD adjustment
1 PLAY NCT-111 (3 kHz)
(Refer to Fig. 6-3) (DECK ASSY)
3000 Hz –10 Hz REV Confirmation
( 3000 Hz +40
–40 Hz )

(2) Head Azimuth Adjustment

¶ This unit is equipped with auto tape selector.
B ¶ Do not switch between forward and reverse operation with the screwdriver inserted.

No. Mode Input Signal/Test Tape Adjustment Points Measurement Adjustment Remarks
Points Value

Head azimuth P3 L (CN2507) After adjustment, apply silicon

NCT-110 test tape Max. Playback
1 PLAY adjustment Screw P1 R (CN2507) bond to the head azimuth
(Playback: 10 kHz, –20 dB) signal level
(Refer to Fig. 6-3) (DECK ASSY) adjustment screw.

(3) Playback Level Adjustment

¶ Since this adjustment determines playback DolbyNR level, Perform it carefully.
C Measurement Adjustment
No. Mode Input Signal/Test Tape Adjustment Points Remarks
Points Value

L ch VR2301 P3 L (CN2507)
NCT-112 test tape
1 PLAY P1 R (CN2507) –3.7 dBV
(Playback: 315 Hz, 4 dB)
R ch VR2302 (DECK ASSY)

7 Recording Section
(1) Recording Bias Adjustment
¶ After the adjustment, caution should be exercised so as not to become under bias by checking the distortion rate.
D
No. Mode Input Signal/Test Tape Adjustment Points Measurement Adjustment
Points Value Remarks

REC/ Input a 315Hz signal to the LINE -

–23.7 dBV
IN terminal. ∗
1 Input signal level
PAUSE
P3 L (CN2507)
P1 R (CN2507)
Load the STD–633 test tape and L ch VR2801 Repeat adjustment until playback level of
REC = (DECK ASSY)
the 10kHz signal is within 0dBV ±0.5dB
2 record/playback the 315Hz and
PLAY from that of the 315Hz signal.
10kHz signals. (see the Note below) R ch VR2802

Note: Set the 10kHz input signal level to the same value as the 315Hz input signal level of step 1.

E
(2) Recording Level Adjustment

No. Mode Input Signal/Test Tape Adjustment Points Measurement Adjustment

Points Value Remarks

REC/ Input a 315Hz signal to the LINE-

–7.7 dBV
IN terminal.∗
1 Input signal level
PAUSE
P3 L (CN2507)
P1 R (CN2507)
L ch VR2401 Repeat recording, playback and
REC = STD–633 test tape and record/ (DECK ASSY)
2 adjustment until playback level of the
PLAY playback the 315Hz signal.
R ch VR2402 315Hz signal becomes –7.7dBV±0.5dB.

102 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 8 7 6 Downloaded from www.Manualslib.com 5manuals search engine
103 XV-EV61
F
Fig. 6-3 Adjustment and Measurement Points
Adjustment Screw Adjustment Screw
E XNP3061-A REV Azimuth FWD Azimuth
RCH
CN2507
R

W246
17
1
3

W247
W228

W219
C2261
C2262

GNDA W248
3
1
L

LCH

C2210

GNDA C2254
C2209

W218 3 1 2 3 1 2
IC2202
DECK TP

(DECK TP)
5 4 5 4
CN2507 MECHANISM UNIT
C2255

CN2506
17

F2202 F2201
1

PRINTED PRINTED
W225 SIDE SIDE
ICT FC
D2256

VA12
W220
17.RECL C2251
PBL
DI P

W227 W249
15.GNDA
CONTACT SIDE

PBR MS W250
RECR W230 D2201
C2215
W223 W251
VREF
D
XPBMUTE
DOL ON\OFF W252 GNDA W253
10.RECMUTE GNDA VREF
PB/XREC
XBEATCUT W231 C2203
BIAS C2216 C2204
DGND W232
VA12
IC2201
DECK ASSY

5.VA+12
VA+12 W233
MS W234
VB+12 W221
1.GNDB C2206 C2205
W254
W255
C2208
W263

W222 W256

GNDA
W236

W235 VA12
W257
C2207
C2201
W259

W238 VA12
(Rch)
GNDA
W237
VREF
W258
C2202
CMKS-P3X

C2218
VA12

VR2302 VR2301 VR2402

PB LEVEL

BIG

Rch
REC LEVEL

Lch
C2217

PB LEVEL Adj.
(Rch)

R2321
W239
W240
Lch
W229
VR2401 VR2402

Rch
C VR2302
REC LEVEL
(Lch)

C2312
VREF
C2311
VR2401
Adj.

W241
W242

GNDA
(Lch)

W261 VA12
W260 VREF
VR2301

C2309
C2403

C2404

C2310
C2418
C2417

IC2301
C2308
C2314
W224
C2807

C2307
L2404
W243
C2410 L2403

C2409
Q2805
C2408 C2407

Production Code
C2425
IC2401
W244
C2406
Q2301
Q2302
B Q2803

C2405

C2420
C2419

D2305

D2306
1 4 OPEN
R2805

L2401

L2402

C2422
1 4
R2806

C2421

CN2301
R2803 D2302 D2301

(Rch)
D2303

VR2802
D2304

OPEN
Q2802

1
Q2801

BIAS
L2802
VR2802

C2808
BIAS

1 2
C2802 C2804

Adj.

Lch
2
CN2302

Rch
VR2801

(Lch)

C2810

PRINTED
6

1
VR2801

C2803
C2801
SIDE A

C2809
Q2806
BIG
A

3
4
W262

SIDE
L2801
C2806 C2805
D DECK ASSY
A
8 7 6 5
 1 2 3 4

6.2 TUNER SECTION

AM Tuner Section
• There is no adjustment in the AM tuner.

FM Tuner Section
• Set the mode selector to FM BAND.
B • Connect the wiring as shown in Fig. 1.
ANT. Input level and signal condition Adjustment
Step Adjustment
No. Title Frequency Input Level Adjust
Modulation Contents
(MHz) (dBµV) point
T-METER Adjust L201 so that the DC voltage between
1 98 OFF 80 L201 Pin 21 and Pin 23 of IC201 (Test point Vtm)
Adjustment
gets within 0 ± 50mV.

DC
MPX SG FM SG PRODUCT Voltmeter
C

FM75Ω antenna terminal

Fig.1 Adjustment Wiring Diagram

C FM/AM TUNER MODULE

D

L201

IC201

E pin 21 pin 23

SIDE B
Fig.2 Adjustment Point

104 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

6.3 DVD SECTION ADJUSTMENT ITEMS ana LOCATION

Adjustment Items Adjustment Points (Mechanism Part)
A
[Mechanism Part]
Cautions: After adjustment, adjustment screw locks with the
1 Tangential and Radial Height Coarse Adjustment Screw tight.
2 DVD Jitter Adjustment

1 2 1 2
Tangential Radial
adjustment adjustment
[Electrical Part] screw screw
Electrical adjustments are not required.

D
6.4 JIGS and MEASURING INSTRUMENTS

E
Test mode remote control
Screwdriver (large) Screwdriver (medium) TV monitor unit (GGF1381)

Screw tight
(GYL1001)

Precise screwdriver DVD test disc Soldering iron F

(GGV1025)

XV-EV61 105
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

6.5 NECESSARY ADJUSTMENT POINTS

A
When
Adjustment Points
Exchange Parts of Mechanism Assy

Mechanical ~, Ÿ ∗ After adjustment, screw locks

Exchange the Pickup
point with the Screw tight.

Electric
point

B
Exchange the Traverse Mechanism
Mechanical
point

Electric
point

Mechanical Ÿ ∗ After adjustment, screw locks

Exchange the Spindle Motor point with the Screw tight.

Electric
C point

Exchange PCB Assy

Exchange PC Board
Mechanical
point
LOAB and DVDM ASSY
Electric
point
D

106 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

6.6 TEST MODE

• The TEST MODE functions that are used only during adjustment are described here. For details, see "7.1.1 TEST MODE".

TEST MODE: ON

Power
ESC TEST

POWER

GGF1381 B
Test mode
ON remote control
unit

TEST MODE: DISC SET

CHECK
<TRAY OPEN> DVD Tuner Deck DVD, CD

OPEN/CLOSE DVD disc OPEN/CLOSE

(Player) (Player)

C
DSC - &&&

TEST MODE: PLAY

<PLAY>

TV/LDP

D
An address is displayed CAUTION:
Perform only trace, video and audio outputs
are nothing.

< When playback with the target address of disc (DVD)>

For example, when playback with # 30000

During PLAY +10 3 0 0 0 0 CHP/TIM Press keys in order

E
030000

TEST MODE: OFF

Power ESC

POWER OR
GGF1381
Test mode
remote control F
OFF unit

XV-EV61 107
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

6.7 MECHANISM ADJUSTMENT

1 Tangential and Radial Height Coarse Adjustment

START
Cautions:
• Remove the Loading Mecha. Assy. Because there is not a Spacer for height adjustment in
• Remove a Spacer for height adjustment adjustment after the second time, will keep it at need.
attached to the back side (shaded area) (This parts is Traverse mechanism exclusive use of a model
of the Loading Mecha. Assy (Float Base) for 2003 years)
with nippers.
7.3mm
B
Loading Mecha. Assy

Float Base
Put a spacer between a Tangential (or Radial) adjustment
screw and Mechanism Base and turn each screw to adjust
the height. (Refer to "6.3 ADJUSTMENT ITEMS AND
LOCATION".)

Spacer for Height adjustment

Note: Turn a flat side

Before removing the flexible cable for the into bottom
C pickup, soldering of the pickup circuit is
necessary.
For details, see "7.1.13 DISASSEMBLY".

108 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

2 DVD Jitter Adjustment

• Playback method of inner and outer address for the purpose is refererd to "6.4 TEST MODE". A
• Jitter indication of the monitor is refererd to "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE".
Use disc: GGV1025

START
Mechanism Assy
• Test mode • Play the DVD test disc
• Play the DVD test disc Adjust the Tangential at inner track
at outer track Adjustment Screw so that (around #30000)
(around #200000) jitter becomes minimum.

J : Min
B

Mechanism Assy

Adjust the Radial

Adjustment Screw so that
jitter becomes minimum.

J : Min

J: ----

• Play the DVD test disc

at outer track
Monitor (around #200000)
Player

Mechanism Assy

Readjust the Tangential

CHECK Adjustment Screw so that
Turn the POWER OFF in Confirm the error rate that is jitter becomes minimum.
case of NG once, and displayed "OK"
perform the adjustment NG
once again. (Example ERROR RATE: 6.6oe - 6 OK )
J : Min

E
K
O

If error rate is OK, Disc playback normally.

locks a root of • The measurement of block error rate
tangential and radial ESC
adjustment screws with ESC 5
the Screw tight.

Screw tight: GYL1001

Test mode end

XV-EV61 109
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

7. GENERAL INFORMATION
7.1 DIAGNOSIS
A 7.1.1 TEST MODE
Test Mode Functional Specification
1 Test mode entry
In the power ON state, press the [ESC] (A8-5F) key and [TEST / RANDOM] (A8-5E) key in order of the Test mode remote control
unit.
• Light the all FL and LEDs, and goes out the FL and LEDs when pressing the keys of something.
• OSD displays test mode. Refer to the "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE".

2 Release the Test mode

• Turn off the power.
• Press the [ESC] (A8-5F) key of the remote control unit and reset it.
B

3 Tray open / close

• Press the [REPEAT A-B] (A8 - 48) key of the remote control unit.
• Press the [OPEN / CLOSE] key of the main unit from the stop state.

4 Playback stop
1. Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state.
2. Press the [STOP] key of the remote control unit or main unit from the playback state.
(Playback stops, but the loaded disc keeps rotating.)

5 LD ON
C DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).
CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).

6 Focus on / sweep
1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order.
2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order.

7 Spindle FG servo
CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and FG servo becomes on.
CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and FG servo becomes on.

8 Tracking open / close

D 1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state.
2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state.

9 Slider servo on/off

1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order.
2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order.

0 Slider in / out
Slider in : In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit.
Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit.

E - Play (perform only the ID search and trace to the specified location)
Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state.
Perform only trace, video and audio outputs are nothing.

= Screen display ON/OFF

1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit.
2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit.

110 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

~ Search
1. Search address input entry
• It becomes the address input mode when pressing the [+10] (A8-1F) key. (Most significant digit of an address displays "<".) A
• In this time, display the last address as the initial state.

2. Search address input

• Press the [0] to [9] (A8-00 to 09) keys of the remote control unit. In the DVD, set an address with hexadecimal.
• In the address input mode, turn to the hexadecimal input by pressing the [PROGRAM] (A8-4C) key (display a "∗" mark), and [1] to
[6] keys are each input as A to F.
• Hexadecimal input and decimal input can switch with toggle.
• In case of CD, perform only the absolute time search.

3. Search execution
• Press the [CHP/TM] (A8-13) key of the remote control unit.
B
• After the search, perform only trace and video and audio outputs are nothing.

4. Release the Search address input

• Clear the address by pressing the [CLEAR] (A8-45) key. Release the address input mode when pressing the [CLEAR] key once again.

XV-EV61 111
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Display Specification of the Test Mode

Character in bold : Item name 2

A
: Information display 3

1 7
8
5 9
6 12
13 14
15
16
17
10 18
B 11 19

1 Address indication 0 Disc sensing [DSC – ∗ ∗ ∗]

The address being traced is displayed in number. The type of discs loaded is displayed.
(as for the DVD, indication of decimal number is possible.) [DVD], [CD ], [VCD], [ ]
DVD : ID indication (hexadecimal number, 8 digits)
[∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
CD : A-TIME (min. sec.) [0 0 0 0 ∗ ∗ ∗ ∗] - Jitter value [J – ∗ ∗ ∗ ∗]
C
2 Code indication of remote control unit [R – ∗ ∗ ∗ ∗] = Version of the AV-1 chip / version of firmware
In case of double code, display a 2nd code. [AV: ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]

3 Main unit keycode indication [K – ∗ ∗] ~ Version of the FL controller [FL: ∗ ∗ ∗ ∗]

5 Tracking status [TRKG – ∗ ∗ ∗] ! Region setting of the player [REG: ∗]

Tracking on : [ON] Setting value : [1] to [6]
Tracking off : [OFF]
@ Destination setting of the FL controller
6 Spindle status [SPDL – ∗ ∗ ∗] [MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗]
[OFF], [ACC/BRK], [CAV], [CLV] Four characters in the front represent the type of model.
D Three characters in the back represent the destination code.
7 Mechanism (loading) position value [M – ∗ ∗] J: /J, K: /KU, /KC, /KU/KC, R: /RL/RD, RAM : /RAM,
Unknown : [01] or [41] LB: /LB, WY: /WY
Open state : [04]
Close state : [08] # Part number of the flash ROM and system controller
During opening : [12] [∗ ∗ ∗ ∗ ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗]
During closing : [22]
$ Version of the flash ROM [V: ∗. ∗ ∗ ∗]
8 Slider position [S – ∗ ∗ ∗ ∗] Flash ROM size [FLASH = ∗ ∗]
In Side Switch ON : [01]
In Side Switch OFF : [00] % Revision of the system controller [S: ∗. ∗ ∗ ∗ / ∗. ∗ ∗ ∗]
version . revision / build number of the ST core
E 9 Output video system [V – ∗ ∗ ∗ ∗]
NTSC system : [NTSC] ^ Revision of the DVD mechanism controller
PAL system : [PAL] [M: ∗ ∗ / ∗ ∗ ∗]
Automatic setting : [AUTO] Kinds of version / firmware of the FE.
Scart terminal output [SK – ∗ ∗] RAM or ROM
(Display only the WY model which can do the output setting
of scart terminal.)
VIDEO : [00]
S-VIDEO : [01]
RGB : [02]

112 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Functional Specification of the Shortcut key

Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC
key of the remote control unit. To quit, press the ESC key
A
Remote Control Remote
Command Contents Conditions
Key Name Control Code
Memory clear and resion / revision indication CLEAR (∗1) A8-45
Average value measurement of DVD error rate 5 (∗1) A8-05
CD error rate measurement 5 (∗1) A8-05
Aspect : Pan scan 2 AF-A2
Aspect : Letter box 3 AF-A3
Aspect : Wide 4 AF-A4
Digital : AC3 5 AF-A5
Digital : AC-3 > PCM 6 AF-A6
Virtual surround : OFF Only for models having the corresponding 7 AF-A7 B
Virtual surround : TruSurround functions 8 AF-A8
Digital output ON REPEAT A AF-E8
Digital output OFF REPEAT B AF-E4
DTS Digital output ON STEP FWD AF-B7
DTS Digtal output OFF STEP REV AF-B8
Scart terminal output : VIDEO AUDIO AF-BE
Scart terminal output : S-VIDEO WY, models equipped with Scart terminal SUBTITLE AF-36
Scart terminal output : RGB ANGLE AF-B5
Progressive OFF R_SKIP A3-9D
Only for progressive models
Progressive ON F_SKIP A3-9C C
Audio 5.1 CH ON Only for models having the corresponding functions KD_ENTER AF-EF
FL indication of EDC / ID error CX (∗1) A8-0E
FL indication of ID number STEREO (∗1) A8-4A
ZOOM ON (X4) ZOOM AF-37
ZOOM OFF < X3 (∗1) A8-59
Service mode indication (error rate indication, etc.) CHP/TIM (∗1) A8-13
Model information indication CHAP (∗1) A8-40
Background color change +10 (∗1) A8-1F
Audio last stage mute ON 9 AF-A9
Audio last stage mute OFF 0 AF-A0
D
Title search Input mode IN SIDE A (∗1) A8-4D
Title No. input Numbers (∗1) A8-00 to A8-09
Search execution PLAY (∗1) A8-17
AUDIO (∗1) A8-1E
Region confimation mode
Numbers (∗1) A8-01 to A8-08
• Service mode indication (ESC + CHP/TIM keys) ∗1 : Test mode remote control unit
ID Address
The error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs.
EDC/ID/AV 1 error history (ID Address, EDC/ID/AV 1 Error, last eight errors)
Self-diagnosis functions (If a mechanical error has occurred, the mechanical-error history is also displayed.)

• Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys)
The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is
E
displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs)
For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less

• Indication of model information (ESC + CHAP keys)

The items from 12 to 19 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to
B.E VERSION, and M is changed to F.E VERSION. For details, see 7.1.4.

• Change of the background colors (ESC + "+10" [Test mode remote control unit] keys)
Every time the keys are pressed, the background color is changed between blue and green alternately.
(The green background is used in SETUP NAVIGATOR.)

• Region confirmation mode (ESC + AUDIO [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys)
After you press the AUDIO key while holding the ESC key pressed and then input the region number, if the number is different from that set in
the unit, an error message is displayed, and the tray opens.
F

XV-EV61 113
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Specification of Model Information Display

To display model information : Press the ESC key then the CHAP key.
A
To close the model information display : Press the ESC key.

• Display contents

2
12

11
B 3
1

4
5

6
7
8
9
10

Character in bold : Item name

: Information display
C

1 Model name
Display it according to model information set from the FL controller.
2 Destination indication
Display it according to model information set from the FL controller.
3 Region No.
4 Part number
5 ROM version
D 6 Flash size
7 FL controller version

8 CHIP VERSION
Version of ST CHIP
CUT ID / JTAG ID

(two columns) (eight columns)

9 B.E VERSION
Version of BACK END (version of ST core software)
. /
softwareVersion . softwareRevision / buildNumber
E 0 F.E VERSION
Version of FRONT END (version of mechanism controller CHIP software)
/
MainVersion / Kinds of firmware RAM or ROM
- Remote control code
= Key code of Main unit

114 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Functional Specification of the Service Mode

• EDC / ID error FL display (shortcut function)
EDC/ID error is displayed on the FL display if you press the CX key while holding the ESC key on the TEST MODE remote A
control unit pressed. To quit while an EDC/ID error is displayed, press the ESC key.

FL display
00 /00 / 01 ∗

∗: Lights when an AV1 error was generated at least once.

Number of sites where an EDC or ID error was generated

Number of retrials while an ID error is being generated
(only displayed at the moment when an error is being generated),
and for the ST models, the number of retrials made for the latest ID error
B
Number of retrials while an EDC error is being generated
(only displayed at the moment when an error is being generated),
and the number of retrials made for the latest EDC error

• Display during Service Mode

To enter Service Mode, press the CHP/TIM key while holding the ESC key pressed.
To quit, press the ESC key.

Service mode display

1 ID Address
2 Error rate (always displayed), in exponential notation
∗∗ (∗∗∗∗) C
Number of error rates
02: Indicates use of the same method as for the 02 models,
No indication: Indicates use of the method used for models before the 02 model

3 EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 errors, last eight errors)
Description of AV1 errors
BIT0: In BE code, an EDC error, FEC I/F buffer overflow, or "not valid" is generated (B.E error)
BIT1: In BE code, the ID is different from that of the target (B.E error)
BIT2: An error was generated in FE-added 2-byte EDC data. (F.E error)

4 Self-diagnosis functions
Whether F.E is normal or not is checked. D
FE OK: No abnormality in F.E
FE Error: Abnormality is recognized in F.E.
Pressing the CHP/TIM key again displays the mechanical error history. Each press of the CHP/TIM
key changes the displays between the mechanical error history and the Service Mode display.
For details on the mechanical error history, refer to the addendum.

Indication plan contents

AV1 BIT
3 ERR 2 1 0
1 00 0 0 0 E
2 01 0 0 1
4 02 0 1 0
03 0 1 1
04 1 0 0
05 1 0 1
06 1 1 0
07 1 1 1

Character in bold : Item name

: Information display
F

XV-EV61 115
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

7.1.2 DISPLAY OF THE MECHANISM ERROR HISTORY

Mechanical Error History
A Only if a mechanical error (FE error) has been generated, a mechanical error history containing up to the last eight errors is
displayed if you press the CHP/TIM key in Service Mode.
Errors are displayed in descending order, with the latest one at the top.

Description of the mechanical error history

1 Error number Note: When an error has been generated, if the servo state
The first two digits are for the error code, and the second is "Disc judge," the disc tray opens, and if the servo
two digits are for the servo state. state is other than "Disc judge," the unit stops
(excluding a case of a device error with the error
code 0xd∗).
Servo State
Error Code
B Indication contents
2 Error number
The elapsed time from the time when the system was
turned on until an error was generated is displayed. 1 2
Note: If a later error time is shorter than the previous 3
error time, it means that the unit was turned off 1 2
then on again. 3

3 Description of errors
Error messages are displayed.
Example: If the error code is 0x13 (Focus lost timeout)
and the servo state is 0x05 (Disc judge), the
message becomes "Focus lost timeout in Disc
judge."
C

• List of the error codes • List of the servo states

FOCUS ERROR 0x0∗ FOCUS TIMEOUT 0x1∗ 0x00 Reset
Focus on error 0x01 Focus on timeout 0x11 0x01 Stop (inside position)
Focus off error 0x02 Focus off timeout 0x12 0x02 Stop (any position)
Focus lost error 0x03 Focus lost timeout 0x13 0x03 Braking for stop
Focus balance adjust error 0x04 Focus balance adjust timeout 0x14 0x04 New disc
Focus gain adjust error 0x05 Focus gain adjust timeout 0x15 0x05 Disc judge
Focus sweep error 0x06 Focus sweep timeout 0x16 0x06 Reserved 1
Focus reflection error 0x07 Focus reflection timeout 0x17 0x07 Playing
D TRACKING ERROR 0x2∗ TRACKING TIMEOUT 0x3∗ 0x08 Start up
Tracking on error 0x21 Tracking on timeout 0x31 0x09 Seeking
Tracking off error 0x22 Tracking off timeout 0x32 0x0A Pausing
Tracking lost error 0x23 Tracking lost timeout 0x33 0x0B Reading BCA
Tracking balance adjust error 0x24 Tracking balance adjust timeout 0x34 0x0C Reserved 2
Tracking gain adjust error 0x25 Tracking gain adjust timeout 0x35 0x0D
STEPPING ERROR 0x4∗ STEPPING TIMEOUT 0x5∗ 0x0E Tray open
Stepping on error 0x41 Stepping on timeout 0x51 0x0F Tray moving
Stepping off error 0x42 Stepping off timeout 0x52
Stepping lost error 0x43 Stepping lost timeout 0x53
Stepping move error 0x44 Stepping move timeout 0x54
E SPINDLE ERROR 0x6∗ SPINDLE TIMEOUT 0x7∗
Spindle on error 0x61 Spindle on timeout 0x71
Spindle off error 0x62 Spindle off timeout 0x72
Spindle lost error 0x63 Spindle lost timeout 0x73
Spindle CAV error 0x64 Spindle CAV timeout 0x74
Spindle CLV error 0x65 Spindle CLV timeout 0x75
ACQUISITION ERROR 0x8∗ ACQUISITION TIMEOUT 0x9∗
PLL lost error 0x83 PLL lost timeout 0x93
DECODER ERROR 0xa∗ DECODER TIMEOUT 0xb∗
ID lost error 0xa3 ID lost timeout 0xb3 Note : 0 x & &
DEVICE ERROR 0xd∗
code
F SRAM error 0xd1 (Only this part is displayed to a display)

116 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Error Code Table

Error Name No. Causes Check Item Possibility of Trouble Remarks
FOCUS ERROR (0 x 0∗) A
Are not there a dirt or a scratch in 1. Pickup
Focus on error 0 x 01 Focus on could not be completed the Disc? Does LD become weak? 2. Driver
Does the lens move up and down? 3. Front End IC
Focus off error 0 x 02 Focus off could not be completed Unknown
Are not there a dirt or a scratch in
Focus lost error 0 x 03 Focus servo is lost 1. Pickup
the Disc? Does LD become weak?
Focus balance adjust error 0 x 04 AFB on could not be completed
Focus gain adjust error 0 x 05 Focus AGC could not be completed
Focus sweep error 0 x 06
Focus reflection error 0 x 07 Dimensions of S curve did not reach to the aim value Does LD become weak? 1. Pickup
FOCUS TIMEOUT (0 x 1∗)
Are not there a dirt or a scratch in 1. Pickup B
Focus on timeout 0 x 11 Did timeout at focus on the Disc? Does LD become weak? 2. Driver
Does the lens move up and down? 3. Front End IC
Focus off timeout 0 x 12 Did timeout at focus off

Focus lost timeout 0 x 13 Did timeout at focus backup

Focus balance adjust timeout 0 x 14 Did timeout at AFB

Focus gain adjust timeout 0 x 15 Did timeout at AGC
Focus sweep timeout 0 x 16
TRACKING ERROR (0 x 2∗)
1. Pickup
Tracking on error 0 x 21 Tracking on could not be completed 2. Driver
3. Front End IC
Tracking off error 0 x 22 Tracking off could not be completed
C
Tracking lost error 0 x 23 Tracking servo is lost 1. Pickup
Tracking balance adjust error 0 x 24 ATB could not be completed 1. Pickup
Tracking gain adjust error 0 x 25 AGC could not be completed 1. Pickup
Tracking jump error 0 x 26 Tracking jump could not be completed
TRACKING TIMEOUT (0 x 3∗)
1. Pickup
Are not there a dirt or a scratch in
Tracking on timeout 0 x 31 Did timeout at tracking on 2. Driver
the Disc?
3. Front End IC
Tracking off timeout 0 x 32 Did timeout at tracking off
Are not there a dirt or a scratch in
Tracking lost timeout 0 x 33 Did timeout at tracking backup 1. Pickup
the Disc?
Tracking balance adjust timeout 0 x 34 Did timeout at ATB 1. Pickup D
Tracking gain adjust timeout 0 x 35 Did timeout at AGC 1. Pickup
Tracking jump timeout 0 x 36 Did timeout at tracking jump
STEPPING ERROR (0 x 4∗)
1. Pickup
Stepping on error 0 x 41 Stepping on could not be completed 2. Driver
3. Front End IC
Stepping off error 0 x 42 Stepping off could not be completed
Stepping lost error 0 x 43 Stepping servo is lost
Do move to inner and outer periphery
1. Stepping motor
of the stepping in the test mode?
Stepping move error 0 x 44 Stepping could not move 2. Inside switch
Do indicate "S-04" at the most inner
3. Driver
periphery of the stepping?
E
STEPPING TIMEOUT (0 x 5∗)
1. Pickup
Stepping on timeout 0 x 51 Did timeout at stepping on 2. Driver
3. Front End IC
Stepping off timeout 0 x 52 Did timeout at stepping off
Stepping lost timeout 0 x 53 Did timeout at stepping backup
Do move to inner and outer periphery
1. Stepping motor
of the stepping in the test mode?
Stepping move timeout 0 x 54 Did timeout at stepping movement 2. Inside switch
Do indicate "S-04" at the most inner
3. Driver
periphery of the stepping?

XV-EV61 117
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Error Name No. Causes Check Item Possibility of Trouble Remarks

A SPINDLE ERROR (0 x 6∗)

Spindle on error 0 x 61 Spindle on could not be completed
Spindle off error 0 x 62 Spindle off could not be completed
Spindle lost error 0 x 63 Spindle lost control
Spindle CAV error 0 x 64 CAV on could not be completed
Spindle CLV error 0 x 65 CLV on could not be completed
SPINDLE TIMEOUT (0 x 7∗)
Spindle on timeout 0 x 71 Did timeout at spindle on
Spindle off timeout 0 x 72 Did timeout at spindle stop
Are not there a dirt or a scratch in 1. Spindle motor
Spindle lost timeout 0 x 73 Did timeout at spindle backup the Disc? 2. Spindle driver
Is FG output from the driver?
B Is spindle rotating? 1. Spindle motor
Spindle CAV timeout 0 x 74 Did timeout at CAV on Is FG output from the driver? 2. Spindle driver
Is the PDM output from Front End? 3. Front End IC
Spindle CLV timeout 0 x 75 Did timeout at CLV on
ACQUISITION ERROR (0 x 8∗)
Are not there a dirt or a scratch in 1. Pickup
PLL lost error 0 x 83 PLL is lost the Disc? 2. Front End IC
ACQUISITION TIMEOUT (0 x 9∗)
Are not there a dirt or a scratch in 1. Pickup
PLL lost timeout 0 x 93 Did timeout at PLL backup the Disc? 2. Front End IC
DECODER ERROR (0 x a∗)
Are not there a dirt or a scratch in 1. Pickup
ID lost error 0 x a3 ID is not readable the Disc? 2. Front End IC
C
DECODER TIMEOUT (0 x b∗)
Are not there a dirt or a scratch in 1. Pickup
ID lost timeout 0xb3 Did timeout at ID backup the Disc? 2. Front End IC
DEVICE ERROR (0 x d∗)
1. SRAM
Power supply of SRAM
SRAM error 0 x d1 Cannot access SRAM 2. Front End IC
Is not bus line short-circuiting?
3. Front End-SRAM bus line
FAILSAFE (0 x e∗)
1. software runaway
Unexpected error 0 x e1 Unexpected error
3. Software bug

118 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

7.1.3 ID NUMBER AND ID DATA SETTING

Caution:
For the DVD players compatible with DVD-RW, for playback of a DVD-RW disc (CPRM), it is necessary that an individual ID
number and ID data are set for each player. If the ID number and ID data be not properly set in the manner described below, A
future operations cannot be guaranteed. The ID number is written on the yellow label at the rear panel of the player.
If there is no yellow label, before downloading FLASH ROM, take note of the ID number set following the procedures
outlined in "ID Number Confirmation Mode" on the next page.

Note: Enter ID numbers while the unit is in Stop mode so that the values set will be immediately written to the flash ROM.
The following operations are all made with the TEST MODE remote control unit (GGF1381).

ID Number Input Mode

1 To enter ID Number Input Mode, with no ID number set, such as 6 This display appears when the PLAY key is pressed in Step 4.
in a case of immediately after upgrading the firmware, press the Enter a 9-digit number to compare. The number is also
ESC key then the STEREO key. displayed on the FL display. B
Note: If a previous ID number and ID data, such as a factory- 7 By pressing the CLEAR key without having input a number, the
preset ID number and ID data, are maintained, the unit unit returns to Step 2 without doing anything else. Each press
enters ID Number Confirmation Mode when the above keys of this key after a number has been input deletes one digit.
are pressed. However, if only an ID number is maintained,
the unit enters ID Data Input Mode. [Player's ID Number Setting]
2 Enter a 9-digit ID number. The ID number is also displayed on ID Number ?
the FL display. 000000001
3 By pressing the CLEAR key without having input a number, you Compare
can exit this mode. Each press of this key after a number has 6 >∗∗∗∗∗∗∗∗∗
been input deletes one digit.

[Player's ID Number Setting] C

Input ID Number !
ID Number ?
2 >---------

3 <CLEAR> Exit

8 After entering all 9 digits, if you press the PLAY key, the unit
compares the numbers input in Steps 2 and 6, and only if the
Input ID Number ! numbers match, that number is set as the ID. Then the unit
automatically enters ID DATA Input Mode. If the numbers do not
match, the disc tray is opened, and the unit exits ID Number
Input Mode.

Note: If you press the PLAY button before inputting a 9-digit ID D

4 After entering all 9 digits, if you press the PLAY key, the unit number, the unit returns to Step 6 without doing anything
enters Compare mode. Enter the same ID number again. Only
else.
if your two input numbers match, the ID number is set. Compare
mode helps eliminate mistyping of the ID number.
[Player's ID Number Setting]
Note: If you press the PLAY button before inputting a 9-digit ID
ID Number ?
number, the unit returns to Step 2 without doing anything
else. 000000001
Compare
5 After entering all 9 digits, if you press the SEARCH key, the
unit unconditionally sets the input number as the ID number. > 0 0 0 0 0 0 0 0 1 OK?
Then the unit automatically enters Player's Data Input Mode.
(The SEARCH key is not accepted after all 9 digits have been 8 <PLAY> Enter
entered.)
Input ID Number ! E
[Player's ID Number Setting]
ID Number ?
> 0 0 0 0 0 0 0 0 1 OK ?

4 <PLAY> Compare Mode

5 <SEARCH> Enter

Input ID Number !

XV-EV61 119
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

ID Number Confirmation Mode

1 To enter ID Number Confirmation Mode after the ID number and • Indication of an ID number already set
A the ID data are set, press the ESC key then the STEREO key. An ID number already set is displayed in the following cases:
1) When the ESC key then the CLEAR key are pressed, user
2 The ID number already set is displayed. settings are cleared, then the ID number set is displayed on
(It is also displayed on the FL display.)
the screen. In this case, the ID number is not displayed on the
FL display.
3 Enter a 9-digit number for comparison. This is not required
when you only wish to check the ID number visually. 2) When the unit enters ID Number Confirmation Mode by your
(The number is also displayed on the FL display.) pressing the ESC key then the CLEAR key, the ID number set
is displayed. In this case, the ID number is also displayed on
4 By pressing the CLEAR key without having input a number, you the FL display.
can exit this mode. Each press of this key after a number has If you only need to confirm the ID number, you can exit
been input deletes one digit. this mode by pressing the CLEAR key or turning off the power.

• Indication when no ID number is set

[Player's ID Number Setting] If no ID number is set, the message "No ID Number!" flashes on
B ID Number ? the screen and FL display for a few seconds after the power is
2 [000000001] turned on or during Stop mode.
Compare
3 >∗∗∗∗∗∗∗∗∗

4 <CLEAR> Exit

Input ID Number !

C 5 After entering all 9 digits, if you press the PLAY key, the unit
compares the number entered in Step 2 with the ID number
set, and only if the numbers match, the unit automatically exits
ID Number Confirmation Mode. If an ID data has not been
entered, the unit enters ID DATA Input Mode. If the numbers do
not match, the disc tray is opened, and the unit exits ID Number
Confirmation Mode.
Note: If you press the PLAY button before inputting a 9-digit ID
number, the unit returns to Step 4 without doing anything
else.

6 After entering all 9 digits, if you press the STOP key, the unit
compares the number entered in Step 3 with the ID number
set, and only if the numbers match, the unit automatically
D deletes the ID number and exits this mode. If the numbers do
not match, the disc tray is opened, and the unit exits this mode.
(The STOP key is not accepted after all 9 digits have been
entered.)

[Player's ID Number Setting]

ID Number ?
[000000001]
Compare
> 0 0 0 0 0 0 0 0 1 OK?

5 <PLAY> Enter
E 6 <STOP> Memory Clear

Input ID Number !

120 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

ID DATA Input Mode

1 To enter ID DATA Input Mode, with the ID number set, press the 5 When writing of the data read from the disc to flash ROM is
ESC key then the STEREO key. completed, "Rom Write OK!" is displayed. After seeing this A
message, you can exit this mode by pressing the CLEAR key.
2 When the STEREO key is pressed, the unit enters ID DATA Note: Whether or not the data have been written to flash ROM can
Input Mode. be confirmed by watching for the message "Rom Write OK!"
being displayed after the disc is read.

[Player's ID Number Setting] [Player's Data Input Mode]

ID Number ?
[000000001]
Compare
>∗∗∗∗∗∗∗∗∗ 5 Rom Write OK!

<CLEAR> Exit <CLEAR> Exit B

2 <STEREO> ID Data Setting Mode

Input ID Number !

3 If the DVD DATA DISC (GGV1085) is loaded in this mode, the 6 If the data cannot be read from the disc, "Disc Error!" is
unit automatically starts reading the data. displayed on the screen, and the disc is ejected.
(If the ID DISC has already been loaded, the unit does not start
reading the data. In this case, open then close the tray.)

C
4 To exit this mode, press the CLEAR key. While data are being [Player's Data Input Mode]
read from the DVD DATA DISC (GGV1085), you cannot exit this
mode.
[Player's Data Input Mode]
6 Disc Error!

<CLEAR> Exit

4 <CLEAR> Exit

Insert The ID Data Disc ! D

• Indication when the data have not been set
If no ID data are set after the ID number is changed, the message
"NO ID DATA" flashes on the screen and FL display for a few
seconds after the power is turned on or during Stop mode.

XV-EV61 121
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

7.1.4 TROUBLE SHOOTING

Microcomputer Section (IF/AF Assy : IC5501)
A Symptom Possible Cause Check Method
Check if the level of the terminal XRESET (Pin 8) is "H."
The microcomputer was not reset.
If it is not, check the RESET circuit.

Check if the AC pulse is input to Pin 4 of the AC input

• The unit cannot be turned on. The AC pulse is not input.
terminal. If it is not, check the AC pulse generation circuit.

The oscillation circuit of the microcomputer The microcomputer or the oscillation circuit is broken.
does not function. Change the microcomputer or the oscillation circuit.
• If the Function is DVD, the voltage of the
VDET input (Pin 17) is either 0.5 Vdd* or If the voltage at Pin 17 of the VDET terminal of the
The unit shuts itself off soon after it is less or 0.85 Vdd* or more. microcomputer is either 0.5 Vdd or less or 0.85 Vdd or
turned on. • The voltage of the PROTECT input more, adjust so that it stays between 0.5 and 0.85 Vdd.
B (Pin 22) is 0.71 Vdd* or less.
• Check that the terminal (Pins 23-25, 29, and 30) for
communication with the DVD microcomputer is live,
• DVD does not operate at all. and if it is not, check if the flexible cable is
Communication with the DVD
• Time is not displayed in FL display disconnected.
microcomputer has not been established.
during DVD function. • Check if an "H" signal is output to Pin 93 of the
XDVDRST terminal.
If no operation key has been pressed, check if the
The unit recognizes that an operation key voltage at Pins 18 of the KEY input terminal is 5 V. If it is
All operation keys are disabled.
has already been pressed. not, check if the operation switch on the line is in failure.

* Vdd= Approx. 5V (depending on the unit)

C ex.) 0.85Vdd= 0.85 × 5 (V)
= 4.25 (V)

122 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

DVD Section

No. Symptoms Diagnosis Contents Possible Defective Points A

An opening screen is not Is the level at both IC5501-pin 67(XDVDRST) and pin66 (DVDON/OFF)
displayed on the monitor µcom (IF/AF IC5501)
on the CONTROL Assy "H" ?
(The FL display lights. The
Check the voltage of CN901-pin 28 and 29 (VPR+8) on the DVDM
mechanism does not work.) DVDM Assy CN901
Assy.

Check that the following voltages are output :

IC411-pin 3 : 1.8V, IC421-pin 3 : 1.8V and IC431-pin 1 : 5V on the Each regulator on the DVDM
DVDM Assy Assy

Crystal resonator
Are resonators (27MHz, 20MHz) on the DVDM Assy oscillating ?
(DVDM Assy X601 and X301)
Refer to contents of an FE error displayed on the FL display. FRONT END IC
(SRAM defectiveness, I2C communication line defectiveness, etc.) (DVDM IC301) B
1 • Is a signal input into IC601-pin 132 (CE3) on the DVDM Assy ?
(Is a signal fluctuating for several seconds after the power is turned on ?) • BACK END IC (DVDM IC601)
→ Communication with flash ROM • Flash ROM (DVDM IC603)
• Are the signals input into IC602-pin 16 (SMIWE), pin 19 (SMICS0) • 64M SDRAM (DVDM IC602)
and pin 38 (SMICLK) on the DVDM Assy ?
(Is a signal fluctuating ?)
→ Communication with flash ROM

Is a signal output from IC603-pin 28 (CPU_OE) on the DVDM Assy? • BACK END IC (DVDM IC601)
(Is a signal fluctuating for several seconds after the power is turned on ?) • Flash ROM (DVDM IC603)

Is a signal input into IC5501-pin 70 (DVDACK) on the CONTROL Assy?

(Is a signal fluctuating ?) µcom (IF/AF IC5501) C
→ Communication with µcom
Is a signal output from IC5501-pin 57 and 58 (SYS_1, 2) on the AF
Assy ? µcom (IF/AF IC5501)
(Is a signal fluctuating in the range of 0-5V ?)
µcom (AF IC5501) – BACK END
Are the signals output from IC5501-pin 23, 24 and 25 on the CONTROL
IC (DVDM IC601)
Assy? (in the range of 0-5V)
communication line
An opening screen is not
displayed on the monitor Check the video signal path between BACK END IC (DVDM IC601) and DVDM Assy
2 • Video circuit
(The FL display lights. The video-out terminal
(see the block diagram) • after BACK END IC (IC601)
mechanism does not work.)
A tray cannot be opened. Connector / wire D
(An opening screen is • Are wires of CN103 on the DVDM Assy disconnected or damaged ?
LOADING SW (LOAB S101)
3 displayed on the monitor)
• Is a LOAD-DRVC signal reaching ? BACK END IC (DVDM IC601)
• Does the voltage of CN105 pin 1 change by pressing the Inside
switch.
Inside switch

XV-EV61 123
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

No. Symptoms Diagnosis Contents Possible Defective Points

A Playback impossible Are the signals output from IC101-pin 34 (F_DRV) and pin 35
FTS Driver IC (DVDM IC101)
(no focusing) (F_RTN) on the DVDM Assy ?
Does 650-nm LD emit light ?
Does a pickup lens move up / down ? Pickup
Does an actuator spring bend ?
• Are plastic parts damaged? Or is a shaft detached?
4 Mechanism section
• Is the turntable detached or tilted?
Is flexible cable of CN101 on the DVDM Assy disconnected or
Flexible cable / connector
damaged ?
Is signal output from IC301-pin 33 (FACT) on the DVDM Assy ?
(Device control of about 2.6 V is output usually. It is fluctuated by about FRONT END IC (DVDM IC301)
± 100 mV with focus up / down.)
B Playback impossible Are the signals output from IC101-pin 12 (A3), pin 13 (A2) and pin 14
(Spindle does not turn) (A1) on the DVDM Assy ? FTS Driver IC (DVDM IC101)
Is pin 41 fixed LOW and is pin 38 fixed HIGH ?

5 Is there any part detached from the spindle motor? Mechanism section
Or Is there any foreign object lodged in it? (Spindle motor)
Are wires of CN105 (DVDM Assy) disconnected or damaged ?
Flexible cable / connector

Is signal output from IC301-pin 44 (SPDL_PDM) on the DVDM Assy ? FRONT END IC (DVDM IC301)
Playback impossible Does 650-nm LD deteriorate ? 650-nm LD deteriorated.
(Playback stops) If the voltage at both ends of R201 on the DVDM Assy is 0.7 V or more, (When playback of a DVD is
the 650-nm LD is definitely deteriorated. impossible)
C Does 780-nm LD deteriorate ? 780-nm LD deteriorated.
6 If the voltage at both ends of R211 on the DVDM Assy is 1.5 V or more, (When playback of CD is
the 780-nm LD is definitely deteriorated. impossible)
FG output : FTS Driver IC
Is there abnormality in FG waveform ?
(DVDM IC101)
Are there scratches or dirt on the disc ? Disc
Picture disturbance during Are there scratches or dirt on the disc ? Disc
7 playback
(block noise, freeze, other) Is there a problem with the format of the disc? Disc
No sound
8 (Picture is normal)
Is signal output from DOUT signal (CN901-pin 21) on the DVDM Assy ? DVDM CN901-pin 21

124 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

7.1.5 DSP TROUBLE SHOOTING (XV-EV61 Only)

XV-EV61 Type Only
• When a sound is not out in the surround mode with the digital signal input. A
• Suppose C,R parts to be poor contact and that is not damaged.
• This shows failure analysis of DSP Assy. Step 2
Step 1
IC8901
IC8501-pin 21

Is 5V No Check CN8003 and

inputting ? other assemblies.
Is output No
signal "L"? Replace IC8501.
Yes

Yes
Is 3.3V No B
outputting ? Replace IC8901.

CN8007 Yes

IC8902
Yes
Is connector No
inserted tightly Insert it tightly.
?
Is 1.8V No
Yes outputting ? Replace IC8902.

CN8011 Yes

End
C
Is connector No
inserted tightly Insert it tightly.
?
Yes
Step 3
End
IC8702

Pin 3

D
Do perform No
3V→5V conversion Replace IC8702.
for pin 17 ?

Yes

Pin 5

Do perform No
3V→5V conversion Replace IC8702.
for pin 15 ?

Yes E

Pin 7

Do perform No
3V→5V conversion Replace IC8702.
for pin 13 ?

Yes

XV-EV61 125
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

A B

A Pin 9 Pin 5

Do perform Do perform No
No
3V→5V conversion Replace IC8702. 5V→3V conversion Replace IC8701.
for pin 11 ? for pin 15 ?

Yes Yes

Pin 12 Pin 7

B Do perform Do perform No
No
3V→5V conversion Replace IC8702. 5V→3V conversion Replace IC8701.
for pin 8 ? for pin 13 ?

Yes Yes

Pin 14 Pin 9

Do perform No
Do perform No
3V→5V conversion Replace IC8702. 5V→3V conversion Replace IC8701.
for pin 6 ? for pin 11 ?

Yes Yes
C
Pin 16 Pin 12

Do perform No
Do perform No
3V→5V conversion Replace IC8702. 5V→3V conversion Replace IC8701.
for pin 4 ? for pin 8 ?

Yes Yes

Pin 18 Pin 14

D Do perform Do perform
No No
3V→5V conversion Replace IC8702. 5V→3V conversion Replace IC8701.
for pin 2 ? for pin 6 ?

Yes Yes

End Pin 16

Do perform
Step 4 5V→3V conversion
No
Replace IC8701.
for pin 4 ?
IC8701
Yes
E
Pin 18
Pin 3

Do perform No
Do perform No 5V→3V conversion Replace IC8701.
5V→3V conversion Replace IC8701. for pin 2 ?
for pin 17 ?
Yes
Yes
End
B

126 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Step 5

IC8201 A

Is SPDIF signal coming?

(be different with Function)

Check
the DVD/CD No Check the other assemblies.
(pin 7). (AF Assy or DVDM Assy)

Yes

Yes

Is Is input
MCKO1 (pin 23) No signal of PDN No Check the other assemblies.
outputting it? (pin 31) "H"? (periphery of microcomputer on the AF Assy)

Yes Yes

Do not Is output
No signal of INT0 No C
oscillate of XTO Replace IC8201.
(pin 29)? (pin 36) "H"?
Note:
X8201 oscillates
Yes Yes
only in analog input.

Is
LRCK (pin 24) No
outputting it? Replace IC8201.

Yes

Is D
SDTO (pin 25) No
outputting it? Replace IC8201.

Yes

Is
BCK (pin 26) No
outputting it? Replace IC8201.

Yes

IC8502-pin2
E

Is
20MHz clock No
outputting it? Replace IC8502 or X8501.

Yes

End

XV-EV61 127
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Step 6 Step 7

IC8501 IC8401
A
Pin 21
Pin 4

Does
No
Does a signal output Replace IC8401.
No it?
a signal output Replace IC8501.
it? Yes
Yes
Pin 22
Pin 5

Does
No
B a signal output Replace IC8401.
Does it?
No
a signal output Replace IC8501.
it? Yes

Yes Pin 23
Pin 6
Does
No
a signal output Replace IC8401.
Does it?
No
a signal output Replace IC8501. Yes
it?
Yes Pin 24

C Pin 7
Does
No
a signal output Replace IC8401.
it?
Does
No Yes
a signal output Replace IC8501.
it?
Pin 25
Yes

End
Does
No
a signal output Replace IC8401.
it?
Yes

D Pin 26

Does
No
a signal output Replace IC8401.
it?
Yes

Pin 27

Does
No
a signal output Replace IC8401.
it?
E
Yes

Pin 28

Does
No
a signal output Replace IC8401.
it?
Yes

End

128 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

7.1.6 SEQUENCE AFTER POWER ON

Reset Start • It starts when the XRESET terminal (Pin 8) is "H" level.
A
Microcomputer IC (PDC108A) (IF/AF Assy : IC5501)
Initialization routine

Microcomputer
initialization

Model
identification
• The inputs to Pins 15 are inspected and the model identification is performed.

Demonstration mode No
• Whether Demonstration mode is entered or not can be
permission
determined by inspecting the backup data.
• The default setting is "Demonstration mode OK."
Yes

Demonstration mode Standby setting

Main loop processing

No
Demonstration mode ? Standby

Yes : Power ON

System power supply on • The level of the SYSPOW terminal (Pin 91) is "H". D

DVD microcomputer start-up • Only in DVD function, the level of the XDVD RESET terminal (Pin 67) is "H".

• The speaker relay is turned on about four seconds after the power is turned on.
Relay release • The level at the RELAY ON/OFF terminal (Pins 86 and 87) are "H."
• The conditions are different depending on whether the headphones are connected
via the Headphones jack, or on the DSP mode.

• The system mute is released about four seconds after the power is turned on. E
Demonstration mode The level of the XSYSMUTE terminal (Pin 94) is "L".
or Normal power ON mode • Muting is not released in the following cases.
• When the main volume is 0.

• If no pulse is input to the AC terminal (Pin 4) for about 60 msec when the microcomputer is in Memory Backup mode,
it will not do any processing.
• The unit will recover from Memory Backup mode if a reset command is input to the XRESET terminal (Pin 8).

XV-EV61 129
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

7.1.7 PROTECTION CIRCUIT

If the TIMER LED on the front panel flashes, check the protection circuit.
Note: If the protection circuit activates, the unit will not recover for 60 seconds even if the AC power cord is disconnected then reconnected.
A If you activate Service Test mode, the protection circuit becomes invalid, which makes diagnosis easy. (To activate Service Test mode,
while connecting SERVICE port (IC5501 pin69)to "+5V", connect AC power cord.)
There are three types of operations for the protection circuit, which are indicated on the LCD display when Service Test mode is entered:
(Short W138 and W139)
POW WNG: The unit was shut down because of an abnormality in the AMP system. (The PROTECT line operates at the MID level.)
POW ERR: The unit was shut down because of a failure in the AMP system. (The PROTECT line operates at the LO level.)
DVD ERR: The unit was shut down because of a failure in the DVD system. (The VDET line operates at the HI or LO level.)

Conditions for the protect circuit operations

Voltage Conditions FL display in Service Test mode
HI level >3.55V Normal
B
PROTECT MID level 1.8V - 3.5V The unit is shut down because of an abnormality.
LO level <1.8V The unit is shut down because of a failure. POW ERR
HI level >4.25V The unit is shut down because of a failure. DVD ERR
VDET MID level 3.3V Normal
LO level <2.5V The unit is shut down because of an abnormality. DVD ERR

The possible failures for each error message are as follows:

POW ERR:
• The Speaker terminal became overloaded because of short-circuit. (See 1.)

• The main power supply became LO level because of short-circuit or disconnection of connectors. (See 2.)
C • Disconnection of the FAN connector or interruption of rotation of the fan (See 3.)
• DC was generated at the output because of a failure in the AMP system, etc. (See 4.)
• Abnormal temperature was detected by the thermistor. (See 5.)
DVD ERR:
• An error was generated in the main power supply inside the DVDM. (See 6.)

Protection circuit that activates against a POW ERR error

1 When the Speaker terminal becomes overloaded

R3601 R3607
N SP-TERMINAL
1.8k 0
A
Assy K EVOL Assy
D
B Q3601
Front L ch VD+5
R3603
33k R108
D3601 27k
GND FL
R3669+5V
22k to
D3603 XPROTECT
DAP202K R3639
27k
Q3640
C
R3668 Q3639 B
22k +
C3633 E
10/50

E In Normal mode, the speaker (6 ohms) is connected between the

FL and GND FL points. Because the voltage at Point A is higher
than that at Point B, Q3601 does not operate.

If the resistance between the FL and GND FL points becomes

1.83 ohms or less, Q3601 begins to operate, Q3639 is turned on,
Q3640 (E, C, and B)is turned on, and the level of XPROTECT
becomes MID.
→ The microcomputer detects the XPROTECT level and
shuts the power to the unit off.
→ After power off, unit recovers. (no reed to unit for 60
seconds)
F

130 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Protection circuit that activates against a POW ERR error

2 When the main power supply becomes LO level
because of short-circuit or disconnection of 2 -3 Checking for VA+12 or VM+12 is short to Gnd or A
connectors Not.
2 -1 Short-circuit-detection circuit for the amplifier E IF/AF Assy
power circuit (+15 V[VP+15], VD+5, -12 V [VA-12]) DVD+12
Circuit for shutting the power off when VP+15, VD+5, or VA-12 VD+12
VA+12 VP+15 VA+12 VP+15
is short-circuited to ground (GND) Q8771
2SD2012
VH+
VD+5 (VP+15)
M MOD. AMP Assy

R8771
10k
Q101_2/2
E2 (Q103_2/2)
+

C8772
D101

0.047
VD+5 E
Q101_1/2 Q102_2/2

C8773
C8771
(D102)

1/50
1/50

R8772
(Q103_1/2) B2 (Q104_2/2) +

10
R108 C
B B C2 B2
27k R101 R102 C2
to (R104)
XPROTECT (R105) E2
B
C 1k 10k
(µ-com) B
Q102_1/2 R109 GNDM D8702
(Q104_1/2) R103 D8701
+ C101 A (R106)
820
E (C102) D105
10k to
1/50 (D106) XPROTECT
(µ-com)
VH–
(VA–12)
• In Normal mode, as Q101 (Q103) (E2, B2, C2) and Q102
(Q104) (E2, B2, C2) are on, the voltage at Point A is about 5 V.
The voltage at Point B is therefore about the same. As Q101 If VFDP is short-circuited to GND, or if the DC electric potential
(Q103) (E, C, B) is off, Q102 (Q104) (E, C, B) is also off. at FL AC1 becomes GND level (in Normal mode: about -27 V)
because of a failure in the DC bias circuit of FL AC1, Q107 then
(1) When VH+(VP+15) is short-circuited to GND Q115 are turned on, and the level of XPROTECT becomes low.
As the voltage at Point B becomes almost ground potential, and → The microcomputer detects the XPROTECT level and shuts
the power to the unit off. C
Q101 (Q103) (E, C, B) then Q102 (Q104) (E, C, B) are turned on,
the level of XPROTECT becomes low.
→ The microcomputer detects the XPROTECT level and shuts
3 When the FAN connector is disconnected or
the power to the unit off.
when rotation of the fan is interrupted
(2) When VH-(VA-12) is short-circuited
As the electric potential of VE at Q102 (Q104) (E2, C2, B2)
M MOD. AMP Assy
VD+5 VPF+15
becomes the same as that at VB, Q102 (Q104) (E2, C2, B2) is
turned off. Following this, Q101 (Q103) (E2, B2, C2) is turned R108 R3654
off, which changes the voltage at Points A and B to a value other to 27k 1.8k
XPROTECT A
than 5 V. Therefore, Q101 (Q103) (E, C, B) then Q102 (Q104) (E, (µ-com)
D3658
UDZS7.5B
Q3652
C2 C DTA124TK
C, B) are turned on, the level of XPROTECT becomes low. Q3651_2/2
B2
D
B
RN1901 + R3658 R3657
E2 E 2.2k 33(1/4W)
(3) When VD+5 is short-circuited FAN+
Q3651_1/2 C3652 D3657
The level of the XPROTECT line becomes low. The RN1901 47/50 1SS355 D3655
1SS355
microcomputer detects the XPROTECT level and shuts the power Q3654 FAN–
to the unit off. R3655 2SD2144S
8.2k D3656
S5688G
2 -2 Short-circuit-detection circuit for the DVD power
supply (VP+8)
R3656
22k V-12F
M MOD. AMP Assy VD+5 VP+8
If no fan is connected between FAN+ and FAN-, or when the fan
R108 D104
27k 1SS355 cannot rotate because of a foreign object caught in the blades, the
XPROTECT
BASE of Q3652 becomes OPEN, and Q3652 and Q3651 (E, C, E
B) are turned off. Then Q3651 (E2, B2, C2) is turned on, and the
Q106 level of XPROTECT becomes low.
DTC124EUA
→ The microcomputer detects the XPROTECT level and shuts
Q107 the power to the unit off.
DTA124EUA
TUNER
As the TUNER line is fixed to GND level, Q107 is always on. If When FAN+ and FAN- are short-circuited, the electric potential at
the level at VP+8 falls to GND level because of short-circuit, etc., Point A becomes higher than GND level by the addition of the
Q106 is turned on, and the level of the XPROTECT line becomes values at D3656 and D3657. As this value is lower than that at
low. D3658, Q3651 (E, C, B) is turned off, Q3651 (E2, B2, C2) is
← The microcomputer detects the XPROTECT level and shuts turned on, and the level of XPROTECT becomes low.
the power to the unit off.
F

XV-EV61 131
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

4 When DC is generated at the output because of 5 When abnormally high temperature is detected
a failure in the AMP system, etc. by the thermistor
A 5 -1 IC81 abnormal temperature detection circuit
K EVOL
N SP-TERMINAL Assy VD+5
Assy VD+5

+5V IC81
R3605 R108 TH111
(R3625) Q3632 27k NCP18WF104J03RB
to
(R3615) E
XPROTECT
Front L ch 27k B A R113
(SW, SL) XPROTECT 220 Q111
C
Q3637 2SC4081
Front R ch
(C, SR) R111 R112
R3606 + 1k 1k
(R3626) R3638 C3632 Q3638 Q3633
(R3616) 10k 470/6.3
27k
The voltage at Point A becomes the divided voltage of TH111
B and R111//R112 (combined resistance of parallel-connected
• In Normal mode, both Q3637 and Q3638 are off.
resistors R111 and R112.) In Normal mode, the resistance at
TH111 is much higher than R111//R112, and Q111 is off. (Note
(1) When positive (+) DC voltage is generated at the SP
that the resistance at TH111 becomes lower as the temperature
terminal
increases.) If the solder temperature at IC81 increases abnormally,
When positive (+) DC voltage is generated at the L or R channel,
the temperature at TH111 (thermistor) mounted closest to the land
and VB of Q3637 becomes higher than that at the operation point,
of IC81 increases accordingly, and the resistance at TH111
Q3632 (E, C, B) is turned on, and the level of XPROTECT
decreases.
becomes low.
When the temperature at TH111 reaches 90-110_C (varying
→ The microcomputer detects the XPROTECT level and shuts
according to conditions,) the voltage at Point (A) becomes high
the power to the unit off.
enough to turn Q111 on, and the level of the XPROTECT line
becomes low. The microcomputer detects the XPROTECT level
(2) When negative (-) DC voltage was generated at the SP
C and shuts the power to the unit off.
terminal
Q3638 is turned on, and XPROTECT is activated.
5 -2 D22 abnormal temperature detection circuit
If the solder temperature at D22 becomes abnormally high
because of short-circuiting between AC - and +, or AC - and -, this
protection circuit is activated.

VFL+5
D22
TH131
NCP18WF104J03RB
to
XPROTECT
A R133
D 220 Q131
2SC4081
R131 R132
560 680
1% 1%

The voltage at Point A becomes the divided voltage of TH131

and R131//R132 (combined resistance of parallel-connected
resistors R131 and R132.) In Normal mode, the resistance at
TH131 is much higher than R131//R132, and Q131 is off. (Note
that the resistance at TH131 becomes lower as the temperature
increases.) If the solder temperature at D22 increases abnormally,
the temperature at TH131 (thermistor) mounted closest to the land
E
of D22 increases accordingly, and the resistance at TH131
decreases.
When the temperature at TH131 reaches 107-125_C (varying
according to conditions,) the voltage at Point (A) becomes high
enough to turn Q131 on, and the level of the XPROTECT line
becomes low. The microcomputer detects the XPROTECT level
and shuts the power to the unit off.

132 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Protection circuit that activates against a DVD ERR error

6 The DVDM monitors the voltage of the main power supply by VDET signals.
In Normal mode, the VDET signal is at the MID level (3.3 V). In the following conditions, the VDET signal level becomes L or H, and the A
microcomputer is notified of this abnormality.

B DVDM Assy E IF/AF Assy

V+12 V+5 V+12 VPR+8
47k 47k V+12
10k 0
4.7k 10k Q921
Q924 Q923
D922
10k Q922

V+3R3

V+12 B
470 470
220
VDET µcom
V+6 V+5 Q925
15k 17
Q926 IC5501
D921 1M PDC108A:EV61
UDZS4.7B 0.1 0.01 PDC109A:EV31
10k 47k

Items to be detected by VDET

(1) When the power voltages inside the DVDM become abnormal, as shown in the table below

Operation C
Status Power Voltage VDET voltage
Q923 Q924 Q922 Q921 D921 D922 Q926 Q925
In Normal mode off off off off off off off off Mid
<1V (on) (on) (on) (off) off on off off L
VDVD+12
>15.5V off off off off off off on on L
<5.2V − off off off off − on on L
VPR+8
>12.6V − on on on on − off off H
When an abnormality is generated. V+6 <3V − − − − − − on on L
<3.6V − off off off off − on on L
V+5
>6.6V − on on on on − off off H
D
<2.5V − − − − − − − − L
V+3R3
>4.25V − − − − (on) − − − H

(2) When the VDET signal to the microcomputer is interrupted because of defective soldering of the 30-pin connector or incomplete
insertion of FFC
→ The VDET level is lowered by the pull-down resistor (1 Mohms) on the side of the microcomputer.

XV-EV61 133
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Other protection circuit

AC detection circuit
A This is a protection circuit that prevents popping sounds in the Speaker and Headphones output when the AC power cord is connected or
disconnected.

N SP-TERMINAL Assy
R3641
10k
RYF to SP Relay Circuit
R3642
1k
RYR to SP Relay Circuit
V+5D
D3635
V+B DAN202K

Q3632
E2
R3631 R3632
22k 22k R3633 Q3631 Q3636
B 6.8k D3634
B2
C2
B
C
D3631 R3634
MTZJ5.1A 2.7k B Q3633
E

C3631 +
R3635 2.2/50
3.3k
ACB Q3635
D3622 D3633 A D3636 to HP MUTE

• The voltage at Point A is a DC voltage which has been generated by half-wave rectification on the minus side of the AC power.
• The voltage at Point B is approx. 5 V.
C

• The base voltage at Q3631 is a voltage between Points A and B divided by R3633 and R3634. As this voltage is negative (-) in Normal
mode, Q3631 is off.
When the AC power cord is disconnected and there is no AC power input, the base voltage at Q3631 becomes +0.6 V or more, and Q3631
is turned on. Then, the operations below follow.

(1) SP Relay
Q3632 (E2, C2, B2), Q3633, and Q3636 (E, C, B) are turned on, the line to activate the SP relay becomes low level, and the SP Relay is
turned off.
(2) HP MUTE
D Q3635 is turned on, and the MUTE circuit for HP is turned on.

134 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Protection Specifications and Service Mode

Protection Specifications
The system microcomputer (CONTRL Assy IC5501) for this unit always monitors if abnormality of the power is generated, and as soon as A
an abnormality is detected shuts off the power. The specifications of the microcomputer terminal for monitoring are as follows:
Name of microcomputer terminal XPROTECT (Pin 22) VDET (Pin 17)
Abnormality of AMP-system power Abnormality of power inside the DVDM
Monitoring item
Short-circuiting of the SP terminal, etc. Assy
In normal conditions 0.71× Vdd∗ or more 0.5 xVdd-0.85 xVdd∗
In abnormal conditions 0.36×Vdd–0.71× Vdd∗
Voltage at terminal
0.85 Vdd∗ or more
In failure 0.36×Vdd∗ or less
0.5 xVdd∗ or less
Monitoring start time 1.5 sec after power is turned on 1.5 sec after power is turned on
Time required for determining abnormality 0.5 sec after detection 0.5 sec after detection
∗Vdd = Approx. 5 V (depending on the unit) B
In abnormal conditions or in failure, the TIMER LED flashes after the power is shut off. If the power was shut off because of an
abnormality, it can be turned on by pressing the STANDBY/ON key. However, if the power was shut off because of failure, for one
minute after a shutdown the STANDBY/ON key is disabled in order to protect against possible ignition of fumes. If the AC power
cord is pulled out during this one minute of standby, when the AC power cord is reconnected, the STANDBY/ON key will still be disabled
until the remaining seconds have elapsed.

This unit has Service Test mode for analyzing the above power abnormality. Its specifications are as follows:
1. Specific conditions for Service Test mode
• VDET is neglected.
• XPROTECT is neglected.
• Even if the unit is urgently shut down in failure in Normal mode, you can turn it on without waiting for one minute.
C
2. How to enter Service Test mode
• While connecting STEST port (IC5501 Pin69) to "+5V", connect AC power cord. (See next page.)

3. How to quit Service Test mode, and the conditions for quitting
• To quit Service Test mode, turn the power off or disconnect the AC power cord.
• When quitting Service Test mode, only data on protection in RAM are cleared.

4. Indications when Service Test mode starts

• Indications on the LCD display when Service Test mode starts differ depending on whether the unit was turned off normally or if the unit
was urgently shut down because the abnormality of the power, as described below.
[After the power is shut down because of D
an failure/abnormality in the AMP system]
FL display P R T C T W N G

FL display V o l u m e 0

FL display P O W E R R

[After the power is shut down because of a failure

in the DVD system]
FL display D V D P R T E C T

FL display V o l u m e 0
E
FL display D V D E R R

5. Operations during Service Test mode

• Basically, operations in Service Test mode are the same as in Normal mode.

XV-EV61 135
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Service Test mode connecting point

A

SIDE A
B
E IF/AF ASSY

SIDE A

W263
C

10
1 1

W255 W258 W262

CN5501
W261

PRODUCTION CODE W257

W358 ECHOCT
W259

1 1

ECHOCTRL1
X5501

W215

LCDDAT
LCDCLK
W208

SCLK
SDATA

MDATA
GNDU

W211

W212

W214

W217
W213

W218
W210

W21
W209
VDET

LEV
IC5501
IFAF ASSY

D
R5636

R5637

W196
DVDPOWER

IC5591
W194

W147

W195
SYS CS2

GNDU
W140
VE+5
W161
W157

W159

W163
W155

Connecting point SERVICE

W148

W149

W151

W153
DVDPOWER

XDVDRST

W139
SYS CS1

W111

W138
TEST
VD+5

W137
W154

W160

W162
W158
W156
W152
W114

W115

W116

Q8771
W143

W144

DVDACK

W102
W145
DVDMUTE
W141

E
W146

W150
XVMUTE
W142
W108
PRINTED SIDE

W106

VDET

LVLSHIFT

E
2SD2012

C5966 GNDD C 7
W101 C5968 W112
W104 B W110
C8773 GNDMDVD
VDVD+12 W107 W113
W105 W109 GNDD CONTACT
W103
CN5903 SIDE
30 1
C8771

C5963
D IC5801

30 1

136 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

7.1.8 DISASSEMBLY
1 Remove of Bonnet Section 2 Front Panel and Deck Section
1 Remove the Bonnet L and R (up VPZ30P080FNI x2) 4 Remove two cable from deck PCB A
Remove the Bonnet L and R (below BBZ30P080FNI x4) 5 Remove the screw

2 Remove eight screws 6 Remove X4 screw from bottom of Front Panel

1 7 Remove × 4 catches

DECK Assy
1
4
2
4 CN8280

CN8281
B
8
Remove 6
Front Panel
2 from this
direction

Rear View Earth

5 Lead
7 Wire
(x2)
C

2 Front Panel and Deck Section

3 Remove the Front Panel Section

(FFC × 2, connectors × 1)

For troublshoot
Deck Mechanism Section of Front Panel,
replace the D
service Jig
Front Panel Assy ( XZD3001)
3
3
CN5601
9
CN5501 3

CN5503
10

9 Remove x4 screw

10 Cut the cable binder

IF/AF Assy Note : Front Panel can removes with the state which
Tray Panel was attached to it.
Note : Operation check of the main unit is possible In this time, remove bottom part of the Front Panel
even if removes the Deck Mechanism Section. first so that the Tray Panel is not caught.

XV-EV61 137
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3 AF/IF PCB Section

1 Remove three screws 3 Remove four screws
A
1 Rear View 3 Top View 3

2
4 3
2
B

C 2
3 AF / IF PCB CAUTION
4 Remove Deck holder
Do not remove
2 CAUTION
the ground wire
Do not remove any screw
5 Disconnect x2 cables
between the
from the output terminator two rear panel.
connect-this will cause no 6 Disconnect x2 FFC
grounding.
Note :
If the Power is turned On
when the DSP Holder
(DSP GND) is not connected
to the rear panel (chassis),
D the parts below may be
destroyed at the DSP ASSY.

IC8702 : TC74VHCT244AFT
IC8401 : AK4529VQ
R8415 : 4.7Ω

If the above parts are destroyed,

For 6CH Only the audio signal can not be out.
Troubleshooting AF/IF, For 3CH Only
Replacc with Jig cable For troubieshooting of AF/IF,
( GGD1222 ) disconnect all FFC and connect
E to Line Input

Turn the PCB with Rear Panel to as shown above

138 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

4 Remove of DVD Mecha Section

1 Remove x4 screws. A

DVD Shield Remove Tunner Module

Mecha Frame

Jig cable
( XZD3001)

1 B

C
1 1
DVD Mecha from Mecha Frame

5 Remove of Power Module Section

D

1 Remove (screws ×4).

2 Remove the Module Holder R .

3 Cut the cable binder

3
1
1

1 1 2

XV-EV61 139
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Removing the Traverse Mecha. Assy-S and Pickup Assy

A
1 Loading Mecha. Assy
1 Remove the bridge by removing the one screw Rear View
2 Pull out the tray, then remove it by pressing the hook
3 Short-circuit two points of C and D by soldering

Note: After replacement, connect the flexible cable,

then remove the soldered joint (open). CD
2 -1
4 Remove the four connectors from the Loading Hook 3
Mecha. Assy

B 5 Remove the four screws that secure the Loading

Mecha. Assy to the unit 1 -1

Bridge

1 -2

Tray
2 -2

Note when reinserting the Tray Drive Cam Pin

When reinserting the Tray, first align the triangle
printed on the Loading Base and the pin of the Drive
Cam, then insert the Tray.

Front Side

Loading Base Triangle

140 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

2 Traverse Mecha. Assy-S

Flexible cable
1 Dislodge the flexible cables from their packaged for the spindle motor Front Side
placement A

1
B

Flexible cable Flexible cable

for the pickup for the stepping motor

Bottom View

2 Remove the four hooks Traverse Mecha. Assy-S D

2 ×2
3 Remove the Traverse Mecha. Assy-S

2 ×2

XV-EV61 141
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

3 Pickup Assy
Note: The Pickup Assy can be removed without Front Side
removing the Traverse Mecha. Assy-S.
A
(shown as Step ø.)

1 Dislodge the flexible cable for the pickup from its

packaged placement
2 Remove the flexible cable for the pickup

1
B

Flexible cable for the pickup

Bottom View

3 Remove the two skew screws and two skew springs

Skew screw 3 3 Skew screw

4 Remove the Pickup Assy

Pickup Assy Skew spring
D

Skew spring

142 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

5 Remove the two screws

Note: The screws are secured with epoxy. Pickup Assy
Make sure to apply epoxy after reattaching
the screws. A

Leaf Spring

5 Joint Spring
Silicone Adhesive
GEM1037 B

Joint 03

5
Silicone Adhesive
GEM1037
C

Arrangement of the flexible cable Arrangement of the flexible cable

for the spindle motor for the stepping motor

: Conductive surface : Conductive surface

Front Side

Front Side

Hook D

Hook

Bottom View Bottom View

F

XV-EV61 143
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

Arrangement of the flexible cable for the pickup

: Conductive surface
A Note:
Be sure to move the Pickup Assy to the innermost perimeter.

1 Fold the flexible cable inward at the position of the reference 7 Pass the flexible cable below the hook, and fold it back
line
Make sure that the cable does not have any slack
2 Attach the flexible cable of the pickup to the connector
3 Fold the flexible cable of the pickup with the backing inward 7

Reference line

B 3 1
2 Hook

Backing
97mm ± 2mm

Front Side Bottom View

C 8 Fold the flexible cable back at the hook

4 Pass the flexible cable through the hook not allowing

Make sure that the cable is loose
any slack

Make sure there is no slack in the cable Hook

8
Reference line
4

Hook

5 Fold the flexible cable as indicated in the photo

9 Fold the flexible cable along the hook
6 Hook the part folded in Step 1 to the hook

5 6
E 9

Reference Hook
Pass the cable below the hook line
Hook

144 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

7.2 PARTS
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
A
• List of IC
STM6316ATXXA, STM5589C, PDC108A

7 STM6316ATXXA (DVDM ASSY : IC301)

• FRONT END IC

¶ Block Diagram

XV-EV61 145
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

A
¶ Pin Function
No. PIN name description detail
1 IREF 12.7kF Analog block reference part
2 GNDAI GNDA analog gnd
3 RFIN capacitor RF signal C association input to a demodulation block
4 RFOUT capacitor B1+B2+B3+B4 mixture listing from an analog block
5 VCCA18 1V8A analog 1V8
6 A B1 PU - B1 input
7 GNDMN GNDA analog gnd
B
8 B B2 PU - B2 input
9 VCC33MN 3V3A analog 3V3
10 REFD to pick up 2V1 output for PU
11 VCC18MN 1V8A analog 1V8
12 D B4 PU - B4 input
13 VCCA18IS 1V8A analog 1V8
14 C B3 PU - B3 input
15 VCCA33IS 3V3A analog 3V3
16 GNDAIS GNDA analog gnd
C
17 VCC33SD 3V3A analog 3V3
18 VCC18SD 1V8A analog 1V8
19 GNDSD GNDA analog gnd
20 F C PU-3 beam C input
21 E A PU-3 beam A input
22 VSHIELDIS GNDA analog gnd
23 VCC18ADC 1V8A analog 1V8
24 GNDADC GNDA analog gnd
25 VSHIELDADC GNDA analog gnd
D 26 VCC33DAC 3V3A analog 3V3
27 GNDDAC GNDA analog gnd
28 SPINDLE 560ohm(st2) DAC current listing for stepper drive
29 SLEDGE 560ohm(st1) DAC current listing for stepper drive
30 REFEXT 20K1% Reference for DAC
31 REFGND refext analog gnd
32 REFDAC 560ohm1% DAC reference
33 FACT 560ohm1% DAC current listing for focus
34 TACT 560ohm1% DAC current listing for tracking
E 35 VCC18DAC 1V8A analog 1V8
36 PC0 FG FG pulse input
37 PC1 PS Driver control signal
38 PC2 tray SW1(open) SW input for tray OPEN position
39 PC3 SB Driver control signal
40 PC4 SLD position Inside SW input

146 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

No. PIN name description detail

41 VSS GNDD digital gnd
42 VDD33 3V3D digital 3V3
43 PC5 780/X650 780nm/650nmLD change control signal
44 PC6 spinde PDM Control PDM listing for spindle drive
45 PC7 opicgain OEIC gain control signal
46 PD7 03PU/X02PU Pull-up settlement
47 VSS GNDD digital gnd
B
48 VDD18 1V8D digital 1V8
49 PD6 (debug) test
50 PD5 (debug) test
51 PD4 (DSPclk) test
52 PD3 (DSPdata) test
53 PD2 (DSPstrb1) test
54 PD1 error monitor Terminal for TRKG error monitor (30KHzLPF add need)
55 PD0 tray PDM drive Control PDM signal for tray drive
56 VSS GNDD digital gnd
C
57 VDD33 3V3D digital 3V3
58 OUT_ERR RS_ERROR BE DATA I/F
59 OUT_EVALID RS_ERR_EN BE DATA I/F
60 VSS GNDD digital gnd
61 OUT_CLK RS_BCLK BE DATA I/F
62 VDD18 1V8D digital 1V8
63 OUT_DVALID RS_DVALID BE DATA I/F
64 OUT_DATA RS_DATA BE DATA I/F
65 OUT_SYNC RS_ECCBST BE DATA I/F
66 PE5 SCL(DMA) FE routine download input D

67 PE4 SDA(DMA) FE routine download input

68 PE3 SCL BE command I/F
69 PE2 SDA BE command I/F
70 PE1 tray SW2(close) SW input for tray CLOSE position
71 PE0 DXXINT FE status propagation signal
72 VSS GNDD digital gnd
73 VDD33 3V3D digital 3V3
74 PF1 10K-pullup Built-in facility setting terminal
75 PF0 10K-pulldown Built-in facility setting terminal E
76 VSS GNDD digital gnd
77 VDD18 1V8D digital 1V8
78 PG1 to EMULATOR Built-in facility setting terminal
79 PG0 to EMULATOR Built-in facility setting terminal
80 TEST 10K-pulldown test

XV-EV61 147
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

No. PIN name description detail

81 RESET_N RESET RESET input
82 VSSADC GNDA analog gnd
83 VDD18ADC 1V8A analog 1V8
84 GNDPLL GNDA analog gnd
85 PLLOFF GNDA analog gnd
86 FREOUT 20MXtal SYSTEMCLK oscillating circuit
87 FREIN 20MXtal SYSTEMCLK oscillating circuit
B
88 VCC18PLL 1V8A analog 1V8
89 LD1 650nmLD 650nmLD driving signal
90 LD2 780nmLD 780nmLD driving signal
91 VCCA33 3V3A digital 3V3
92 TWSEL CD_VR/GND Monitor diodes VR junction terminal for CD
93 LMD1 LMD/LMD1 Monitor voltage junction terminal
94 LMD2 DVD_VR/LMD2 Monitor diodes VR junction terminal for DVD
95 GNDL GNDA analog gnd
96 TST_PM nc tset
C
97 TST_SLICE nc test
98 TST_ADC nc test
99 RFSACD SACD_IC RF signal output
100 VBGFILT capacitor Condenser junction terminal for inside reference stability

148 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

7 STM5589CVA (DVDM ASSY : IC601)

• BACK END IC
A
¶ Pin Function
No. Pin Name Dir. Pin Function
Fr ont Panel / DA C int er f ace.
1 FP_SO OUT
Ser ial t r ansf er dat a out put .
2 A _DA T A 3 OUT r eser v ed
3 V CLK OUT r eser v ed
4 V DD_3V 3 - 3.3 V Power supply
5 V SS - Gr ound
6 B _DA T A OUT r eser v ed
7 B _B CLK OUT r eser v ed
B
8 B _FLA G OUT r eser v ed
OUT I t is not connect ed except 5 Disc Changer .
9 T RYPOS Only 5 Disc Changer .
IN T r ay r ot at ion pulse input .
CA PT URE_I N0 can be used.
Out put signal f or S-V ideo out put S1/S2 cont r ol.
10 SQUEEZE OUT
' H' : squeeze out put mode.
11 RT S OUT UA RT (RS-232C) Request T o Send signal out put .
Out put signal f or S-V ideo out put S1/S2 cont r ol & EURO(SCA RT ) connect or (FUNCT I ON
12 LET T ER OUT SWI T CHI NG) signal.
' H' : let t er -box out put mode.
13 CT S IN UA RT (RS-232C) Clear T o Send signal input . C
14 V DD_1V 8 - 1.8 V Power supply
15 V SS - Gr ound
Fr ont -End L6316 st r eam int er f ace.
16 FE_DA T A IN
Ser ial dat a input .
Fr ont -End L6316 st r eam int er f ace.
17 FE_B CLK IN
Ser ial clock input .
Fr ont -End L6316 st r eam int er f ace.
18 FE_DV A LI D IN
Dat a v alid f lag input .
Fr ont -End L6316 st r eam int er f ace.
19 FE_SYNC IN
Ser ial sy nchr onize f lag input .
Fr ont -End L6316 st r eam int er f ace.
20 FE_EV A LI D IN
Er r or v alid f lag f or RS_split . D
Fr ont -End L6316 st r eam int er f ace.
21 FE_ECCB ST IN
ECC block st ar t f lag f or RS_split .
Out put signal f or a change of int er lace/Pr ogr essiv e out put f or v ideo dr iv er .
22 I /X P OUT
' L' : pr ogr essiv e ' H' : int er lace
23 V DD_RGB - RGB cir cuit 3.3 V Power supply
24 V SS_RGB - RGB cir cuit Gr ound
25 B _OUT OUT B / Cb
26 G_OUT OUT G/Y
27 R_OUT OUT R / Cr
28 V REF_RGB IN RGB DA C r ef er ence
29 I REF_RGB IN RGB DA C cur r ent r ef er ence E
30 V DD_YCC - YC cir cuit 3.3 V Power supply
31 V SS_YCC - YC cir cuit Gr ound
32 Y_OUT OUT Y
33 C_OUT OUT C
34 CV _OUT OUT CV
35 V REF_YCC IN YCC DA C r ef er ence
36 I REF_YCC IN YCC DA C cur r ent r ef er ence
37 V DD_1V 8 - 1.8 V Power supply
38 V SS - Gr ound
F

XV-EV61 149
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

A
No. Pin Name Dir. Pin Function
I t is not connect ed except 5 Disc Changer .
39 X DRV M UT E OUT Only 5 Disc Changer .
Out put signal f or mot or dr iv er mut ing.
' L' : mut ing
OUT I t is not connect ed except 5 Disc Changer .
40 OPEN Only 5 Disc Changer .
IN I nput signal f or t r ay posit ion.
' H' : complet e OPEN posit ion.
OUT I t is not connect ed except 5 Disc Changer .
B 41 CLOSE Only 5 Disc Changer .
IN I nput signal f or t r ay posit ion.
' H' : complet e CLOSE posit ion.
OUT I t is not connect ed except 5 Disc Changer .
42 CLA M P Only 5 Disc Changer .
IN I nput signal f or showing disc clamp posit ion.
' H' : complet e disc clamp posit ion.
OUT I t is not connect ed except 5 Disc Changer .
43 UNCLA M P Only 5 Disc Changer .
IN I nput signal f or showing disc un-clamp posit ion.
' H' : complet e disc clamp posit ion.
OUT I t is not connect ed except 5 Disc Changer .
C 44 D I SC _ SN S Only 5 Disc Changer .
IN I nput signal f or disc exist ing.
' L' : exist ing
45 X DRV M UT E2 OUT r eser v ed
46 T P-x OUT r eser v ed
47 V DD_3V 3 - 3.3 V Power supply
48 V D D _ PC M - 1.8 V Power supply
49 V SS_PCM - Gr ound
50 V SS - Gr ound
51 A _B CK OUT A udio DA C clock
52 A _DA T A 0 OUT A udio DA C Fr ont L,R dat a
D 53 A _DA T A 1 OUT r eser v ed
54 A _DA T A 2 OUT r eser v ed
55 A _M CLK OUT A udio DA C M ast er clock
56 A _LRCK OUT A udio DA C L/R clock
57 A _DOUT OUT S/PDI F(I EC60958) digit al audio out put .
58 SM I _ A 4
59 SM I _A 5
60 SM I _A 6
OUT SM I SDRA M A ddr ess
61 SM I _A 7
62 SM I _A 8
63 SM I _A 9
E
64 V DD_1V 8 - 1.8 V Power supply
65 V SS - Gr ound
66 SM I _ A 3
67 SM I _ A 2
68 SM I _ A 1
69 SM I _ A 0
OUT SM I SDRA M A ddr ess
70 SM I _A 10
71 SM I _A 11
72 SM I _A 12
73 SM I _A 13
F

150 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

No. Pin Name Dir. Pin Function

74 SMI_CS0 OUT SMI SDRAM chip select 'L'. Remote control
75 SMI_CS1 OUT reserved
76 11MI_SYSTEM
S RAS DISPLAY OUT SMI SDRAM RAS 'L'
77
Switches between information
SMI_CAS OUT
and clock
SMI SDRAM CAS 'L'
displays . The remote control for the EV61DVD model is
78 SMI_WE OUT SMI SDRAM Write Enable 'L'
12 ST. MEMORY SMI SDRAM Lower DQM shown in the illustration below.
79 SMI_DQML OUT
Use for saving and listening to'Lstation
': Lower presets
select
SMI SDRAM Upper DQM
80 SMI_DQMU OUT
'L': Upper select
13DD_ENTER STANDBY/ON B
81 V 3V3 - 3.3 V Power supply
Select an option or execute a command 1
82 SMI_CLKIN IN External SDRAM clock input.
2 DVD/CD TAPE FM/AM LINE
83 14SS VOLUME +/–
V - Ground
84 Adjusts
SMI_D0 the volume level
AUDIO
DVD
SUBTITLE ANGLE ZOOM
85 SMI_D1 3
15 OPEN/CLOSE 4
DSP
SURROUND ADVANCED
DVD DISP
MONO SYSTEM DISP
86 SMI_D2 13
Opens/closes the disc tray I — KEYCON — i
KARAOKE ECHO TIMER MUTE 14
87 SMI_D3 5 15
16MI_REVERSE MODE
CLOCK ADJ.
16
88 S D4 6 VOLUME
Selects I/O SMI SDRAM Data
89 SMI_D5 the playback mode for tapes. SYSTEM SETUP TOP MENU
7 TUNE +
17
90 S
17MI_REC/STOP
D6 HOME DVD MENU
MENU
ST – ST +
91 SMI_D7
Starts/stops recording on the tape deck 8 ENTER C
SOUND
92 SMI_D8 MODE RETURN

93 SMI_D9 9 TUNE –
18
18 TUNING and playback control buttons /e 33 E/
94 VDD_1V8 - 1.8 V Power supply 10 1 3 ¡
The tuning/scan/skip buttons are used for FOLDER +
95 S MI_CLK
tuning OUT
into OUT orSscanning
stations, skipping DRAM cloctracks
k output. FOLDER –

4 8 7 ¢
96 VSSdiscs or tapes. The playback
on - Grcontrol
ound button is PROGRAM REPEAT RANDOM

97 used
S for
MI_D1 0 playing, pausing and stopping 11 1 2 3 CLEAR
TEST TONE CH LEVEL SLEEP

98 playback.
S MI_D11 4 5 6 ENTER

99 S
19MI_PUSH
D12 OPEN indicator 7 8 9 0
I/O SMI SDRAM Data
100 SMI_D13 down on this side on the cassette door
Pressing
TV CONTROL

101 will
S MI_open
D14 the tape deck SHIFT INPUT CHANNEL VOLUME 19
12 D
102 SMI_D15 5.1ch DVD SURROUND SYSTEM XXD3060
20 MIC VOL
103 TRACK_CROSS OUT reserved
Controls the volume of the karaoke mics
104 DSD_XPCM OUT reserved
105 21AC_MIC
D XRSinput
T jacks OUT reserved
106 ADC_PCMCLK OUT reserved
22 PHONES jack
107 VDD_3V3 - 3.3 V Power supply
Headphone jack
108 VSS - Ground 1 STANDBY/ON ( )
109 XTRST IN Diagnostic Control Unit inSwitches
terface the player on or into standby
110 TMS IN Diagnostic Control Unit interface
2 Function select buttons
111 TDO OUT Diagnostic Control Unit interface
Selects the source you want to listen to
112 TDI IN Diagnostic Control Unit interface E
113 TCK IN Diagnostic Control Unit in3terfaDVD
ce control buttons
Only 5 disc changer.
114 ROTDRV OUT
PWM output for tray rotation.
AUDIO
Selects the audio channel or language
Boot select
1 15 BOOT_FROM_ROM IN 'L' : Boot from DCU.
'H' : Boot form ROM.
Only 5 disc changer.
116 LOAD_DRV OUT
PWM output for tray Open/Close drive.
OE signal for 16M bits FLASH memory for firmware.
117 CPU_OE OUT
'L': enable

XV-EV61 151
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

No. Pin Name Dir. Pin Function

118 CPU_SDCK OUT CLOCK f or 64M bit s SDRA M f or debugging f ir mwar e.
119 V DD_1V 8 - 1.8 V Power supply
120 PI X CLK IN M ast er 27M Hz sy st em clock input .
121 V SS - Gr ound
122 V DD_PLL - Clock PLL cir cuit 1.8 V Power supply
123 V SS_PLL - Clock PLL cir cuit Gr ound
Power ON sy st em RESET signal.
124 X RESET IN
' L' : r eset

B
125 SA CD_I RQ IN r eser v ed
Fr ont Panel int er f ace.
126 FP_X RDY IN
Hand-shake input .
127 FE_I NT IN I nt er r upt input signal f r om Fr ont -End L6316.
Flash memor y wr it e enable.
128 F_X WE, SD_DQM L OUT Debug SDRA M /SRA M Lower DQM .
' L' : enable, Lower select .
Debug SDRA M /SRA M Upper DQM
129 SD_DQM U OUT
' L' :upper select
Debug SDRA M Read/Wr it e
130 SD_RX W OUT
' L' :wr it e, ' H' :r ead
131 CPU_WA I T IN CPU wait ' H' input
C 132 CE_FLA SH OUT Flash memor y Chip Enable ' L' .
133 CPU_CE2 OUT r eser v ed
134 CPU_CE1 OUT r eser v ed
Debug SDRA M RA S ' L'
135 SD_X RA S OUT
Debug SRA M chip enable ' L'
136 V DD_3V 3 - 3.3 V Power supply
137 V SS - Gr ound
138 CPU_RA S1 OUT r eser v ed
139 SD_X CA S OUT Debug SDRA M CA S ' L'
140 SD _ X C S OUT Debug SDRA M Chip Select ' L'
141 CPU_D0
D 142 CPU_D1
143 CPU_D2
144 C PU _ D 3
I /O FLA SH, Debug SDRA M /SRA M dat a
145 C PU _ D 4
146 CPU_D5
147 CPU_D6
148 C PU _ D 7
149 V DD_1V 8 - 1.8 V Power supply
150 V SS - Gr ound
151 CPU_D8
E 152 CPU_D9
153 CPU_D10
154 CPU_D11
I /O FLA SH, Debug SDRA M /SRA M dat a
155 CPU_D12
156 CPU_D13
157 CPU_D14
158 CPU_D15
159 V DD_3V 3 - 3.3 V Power supply
160 V SS - Gr ound

152 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

No. Pin Name Dir. Pin Function

161 CPU_A 1
162 CPU_A 2
163 CPU_A 3
164 C PU _ A 4
165 C PU _ A 5
OUT FLA SH, Debug SDRA M /SRA M A ddr ess
166 CPU_A 6
167 CPU_A 7
168 CPU_A 8
169 C PU _ A 9 B
170 CPU_A 10
171 V DD_1V 8 - 1.8 V Power supply
172 V SS - Gr ound
173 CPU_A 11
174 CPU_A 12
175 CPU_A 13
176 CPU_A 14
177 CPU_A 15
178 CPU_A 16 OUT FLA SH, Debug SDRA M /SRA M A ddr ess
179 CPU_A 17
C
180 CPU_A 18
181 CPU_A 19
182 CPU_A 20
183 CPU_A 21
184 V DD_3V 3 - 3.3 V Power supply
185 V SS - Gr ound
186 X EX PE OUT r eser v ed
Fr ont -End L6316 st r eam int er f ace.
187 FE_ERROR IN
ECC Er r or f lag
EURO(SCA RT ) connect or (B LI NK I NG) out put signal
188 V SEL1 OUT ' L' : RGB out put disable
' H' : RGB out put enable D
EURO(SCA RT ) connect or V /Y, R/C signal.
189 V SEL2 OUT ' L' : V RGB out put = YCGB
' H' : V RGB out put = V RGB
Fr ont -End L6316.
190 FE_RST OUT Har dwar e r eset out put .
' L' : r eset
191 SA CD_X RST OUT r eser v ed
192 X M M UT E OUT r eser v ed
193 B _SYNC OUT r eser v ed
Fr ont -End L6316 command int er f ace
194 SD A I /O
I 2C bus ser ial dat a line.
E
Fr ont -End L6316 command int er f ace
195 SCL OUT
I 2C bus ser ial clock line.
196 B _WCLK OUT r eser v ed
197 T XD OUT UA RT (RS-232C) dat a out put
198 V DD_1V 8 1.8 V Power supply
199 V SS - Gr ound
200 RX D IN UA RT (RS-232C) dat a input

XV-EV61 153
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

No. Pin Name Dir. Pin Function

Out put signal f or analog audio out put line mut ing.
201 X A M UT E OUT
' L' : mut ing
202 T RI GI N IN Diagnost ic Cont r ol Unit int er f ace
203 T RI GOUT OUT Diagnost ic Cont r ol Unit int er f ace
Chip enable f or audio DA C ser ial cont r ol.
204 D A C _ X C S0 OUT
' L' : enable
205 DA C_X CS1 OUT r eser v ed
Fr ont Panel / DA C int er f ace.
206 FP_A CK OUT
Hand-shake (acknowledge) out put ' H' .
B Fr ont Panel / DA C int er f ace.
207 FP_SCK OUT
Ser ial t r ansf er clock out put .
Fr ont Panel int er f ace.
208 FP_SI IN
Ser ial t r ansf er dat a input .

154 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

PDC108A (IF/AF ASSY : IC5501) A

• System Control Microcomputer
Pin Functions
No. Mark Pin Name I/O Function
1 PA3/WR# XHPMUTE O Control of Headphone mute
2 PA4/RD# HPDET I Detect to insert headphone
3 PA5/RS ATT6 O Control for ATT 6dB
4 P70 / INT0 / T0LCP / AN8 ACPULSE I AC PULSE input (Interruption)
5 P71 / INT1 / T0HCP / AN9 TIMER LED O Control mute of timer LED
6 P72 / INT2 / T0IN RDS CLK I Clock input from RDS decoder B
7 P73 / INT3 / T0IN REMOCON I REMOCON signal input (Interruption)
8 RES# XRESET I µ-com reset input
9 XT1 / AN10 XT1 − (When this port don't use , please connect VDD)
10 XT2 / AN11 XT2 − (When this port don't use , please set open)
11 VSS1 VSS1 −
12 CF1 CF1 −
13 CF2 CF2 −
14 VDD1 VDD1 −
15 P80 / AN0 SIMUKE I Destination distinction input
16 P81 / AN1 LEVELIN I Level meter signal input
C
17 P82 / AN2 VDET I DVD 3.3V detection input
18 P83 / AN3 XPROTECT I Protection and Fan Error detection input
19 P84 / AN4 ST/TUNE I STEREO tuned detection input
20 P85 / AN5 KEY 1 I key1 input
21 P86 / AN6 KEY 2 I Key 2 input
22 P87 / AN7 KEY 3 I Key 3 input
23 P10/SO0 SDATA O System bus data output (AMP side output)
24 P11 / SI0 / SB0 MDATA I System bus data input (AMP side input)
25 P12 / SCK0 SCLK I System bus clock input
26 P13 / SO1 DSPDI O Data output to DSP (MOTOROLA) and DIR
D
27 P14 / SI1 / SB1 DSPDO I Data input from DSP (MOTOROLA)
28 P15 / SCK1 DSPCK O Clock output to DSP (MOTOROLA) and DIR
29 P16/T1PWML XDSPMUTE O MUTE request to DSP module
30 P17/T1PWMH/BUZ DEC MUTE I Detection of 1st DSP boot success from DSP module
31 PE0 DSPRST O RESET to DSP(MOTOROLA) Module
32 PE1 DSPSS O Slave selection to DSP(MOTOROLA)
33 PE2 BUSY I For MCACC
34 PE3 DSPHREQ I Error detection from DSP(MOTOROLA)
35 PE4 DIRERR I LOCK/UNLOCK from DIR
36 PE5 DIRDD I Data input from DIR/CODEC
E
37 PE6 DIRCS O Data output to DIR/CODEC
38 PE7 DIRRST O Reset to DIR /CODEC
39 VSS4 VSS4
40 VDD4 VDD4

XV-EV61 155
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

No. Mark Pin Name I/O Function

A 41 PF0 DSPMODE O MODE selection(ROM/RAM) to DSP(MOTOROLA)
42 PF1 XTL0 O Selection X'tal to DIR
43 PF2 TXCE O Chip enable for tuner LSI
44 PF3 TXCLK O Clock for tuner LSI
45 PF4 TXIDATA O Data for tuner LSI
46 PF5 TXMUTE O Control mute of tuner
47 PF6 TCMSIN I Input MS signal
48 PF7 TXODATA I input data from tuner LSI
49 SI2P0/SO2 TCEXPOE O Output enable to EXPAND IC for deck
50 SI2P1/SI2/SB2 TCEXPCLK O Clock to EXPAND IC for deck
B 51 SI2P2/SCK2 TCEXPCE O Chip enable to EXPAND IC for deck
52 SI2P3/SCK20 TCEXPDAT O Data toEXPAND EXPAND IC for deck
53 PWM1 NC NC
54 PWM0 NC NC
55 VDD2 VDD2
56 VSS2 VSS2
57 P00 SYS_CS2 O Chip select 2 for system bus
58 P01 SYS_CS1 O Chip select 1 for system bus
59 P02 EXPOE O Output enable to EXPAND IC for Vocal fader, level shift and echo
60 P03 EXPCE O Chip enable to EXPAND IC for Vocal fader, level shift and echo
C 61 P04 LCDDAT O Data for tuner FL(LCD) driver
62 P05 LCDCLK O Clock for tuner FL(LCD) driver
63 P06 VOCALC O Control for vocal C
64 P07 VOCALB O Control for vocal B
65 P20/INT4/T1IN VOCALA O Control for vocal A
66 P21/INT4/T1IN DVDPOWER O Control power supply for DVD module
67 P22/INT4/T1IN XDVDRST O Control mute of AUX output
68 P23/INT4/T1IN TESTMODE l Set TEST MODE for product line (service) and unit checker
69 P24/INT5/T1IN SERIVCE I Set SELF CHECK for service
70 P25/INT5/T1IN DVDACK I Ackknowiegement from DVD MODULE (Interruption)

D 71 P26/INT5/T1IN XVMUTE O Wake up request to DVD MODULE

72 P27/INT5/T1IN ECHCNT1 O Control of echo level 1
73 P30 ECHCNT2 O Control of echo level 2
74 P31 KCCONSTB O Strobe for Key Control IC
75 P32 KCONCLK O Clock for Key Control IC
76 P33 KCONDATA O Data for Key Control IC
77 P34 INPUTSELB O AUDIO source SELECT B
78 P35 INPUTSELA O AUDIO source SELECT A(CD,TUNER,TAPE,AUX) BU4052
79 P36 TCHALF l Input switch of mecha half
80 PB7/D7 TCMODE I Input switch of mecha mode

156 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

No. Mark Pin Name I/O Function

81 PB6/D6 TCRECF l Input switch of mecha during recording forward A
82 PB5/D5 TCRECR I Input switch of mecha during recording reverse
83 PB4/D4 RDSPOW l Control power supply of RDS ( L : POWER ON)
84 PB3/D3 RDSDATA O Input RDS data
85 PB2/D2 TCPULSE O Input pulse of TC reel
86 PB1/D1 RYR O REAR RELAY ON/OFF
87 PB0/D0 RYFSC O FRONT / SW / CENTER RELAY ON/OFF
88 VSS3 VSS3 −
89 VDD3 VDD3 −
90 PC7/A7 XAUXMUTE O Control mute AUX output
91 PC6/A6 SYSPOW O Control power supply of system B
92 PC5/A5 DVDMUTE I Control mute of DVD MODULE(Interrruption)
93 PC4/A4 XMUTEC O C ch MUTE ON/OFF
94 PC3/A3 XSYSMUTE O Control mute of system
95 PC2/A2 (VOLMUTE) O (Contorol mute of E-vol IC)
96 PC1/A1 VOLCLK O Clock for E-vol IC
97 PC0/A0 VOLDATA/CE O Data/CE for E-vol IC
98 PA0/CS2# FLASHE/D − for FLASH writing
99 PA1/CS1# FLASHDO − for FLASH writing
100 PA2/CS0# FLASHCLK − for FLASH writing

C
• Port0 (P00-P07) can be selected for input or output by each 4 bits (P00-P03,P04-P07). Set for input when reset. And it can be set C-MOS or
Nch-OD by each 1 bit in option.
• Port1 (P10-P17) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit
in option.
• Port2 (P20-P27) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit
in option.
• Port3 (P30-P36) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit
in option.
• Port7 (P70-P73) can be selected for input or output by each 1 bit. Set for input when reset.
• Port8 (P80-P87) can be selected for input or output by each 1 bit. Set for input when reset.
• PortA (PA0-PA5) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit
in option.
• PortB (PB0-PB7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1
bit in option. D
• PortC (PC0-PC7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1
bit in option.
• PortE and PortF can be selected for input or output by each 2 bits.

• In case of without RDS, it is best that RDSDATA and RDSCLK are assigned as I/O port which can be set output and output low level.

XV-EV61 157
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

7.3 CLEANING

A
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:

Position to be cleaned Cleaning tools

Pickup lenses Cleaning liquid : GEM1004

Cleaning paper : GED-008

158 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

8. PANEL FACILITIES
A

Front panel

1 TIMER indicator
The front panel controls for the EV61DVD model
Lights in standby when the timer has been set
are shown in the illustrations below.
2 STANDBY/ON
Switches the player on or into standby
1 3 SOUND MODE B
2 10 Adjusts the tone. Also use to adjust the balance
3
PGM RDM RPT– 1
ADV.SURR. SFC
LINE
MONO STEREO
RDS TUNED
96kHz
11 (EV31DVD model only) and DSP controls
REC

(EV61DVD model only)

4 SUB Wf
12
5 13 4 ADVANCED SURROUND
(EV61DVD model)
PRO LOGIC
NR B.CUT REC
DIGITAL
ASES
Selects an advanced listening mode
ECHO KEY KARAOKE L R WAKE– UP REC

14 VIRTUAL SURROUND(EV31DVD model)

6 15 Switches the Virtual Surround effect on or
off C

5 SURROUND(EV61DVD model)
Selects a surround listening mode
7
8 SFC(EV31DVD model)
16
Selects sound modes or custom settings
9 17 from the Sound Field Control
18
19 6 Function select buttons
Selects the source you want to listen to
7 KARAOKE D
Selects audio channels for karaoke
8 DOLBY NR (DEMO)
Switches Dolby Noise Reduction on or off

9 ASES
20 Press for CD-to-tape synchro recording

21 10 TIMER/CLOCK ADJ.
22 Use for setting the clock , as well as for E
setting and checking the timers

XV-EV61 159
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

A
Remote control
11 SYSTEM DISPLAY
Switches between information and clock
displays . The remote control for the EV61DVD model is
12 ST. MEMORY shown in the illustration below.
Use for saving and listening to station presets

13 ENTER STANDBY/ON

Select an option or execute a command 1

B
2 DVD/CD TAPE FM/AM LINE
14 VOLUME +/–
Adjusts the volume level AUDIO
DVD
SUBTITLE ANGLE ZOOM
3
15 OPEN/CLOSE 4
DSP
SURROUND ADVANCED
DVD DISP
MONO SYSTEM DISP

Opens/closes the disc tray 13

I — KEYCON — i
KARAOKE ECHO TIMER MUTE 14
5 15
16 REVERSE MODE
CLOCK ADJ.
16
6 VOLUME
Selects the playback mode for tapes. SYSTEM SETUP TOP MENU
7 TUNE +
17
17 REC/STOP HOME
MENU
DVD MENU
ST – ST +
Starts/stops recording on the tape deck 8 ENTER

SOUND
MODE RETURN
C 9 TUNE –
18
18 TUNING and playback control buttons /e 33 E/

10 1 3 ¡
The tuning/scan/skip buttons are used for FOLDER +
FOLDER –
tuning into stations, skipping or scanning tracks 4 8 7 ¢
on discs or tapes. The playback control button is PROGRAM REPEAT RANDOM

used for playing, pausing and stopping 11 1 2 3 CLEAR

TEST TONE CH LEVEL SLEEP
playback. 4 5 6 ENTER

19 PUSH OPEN indicator 7 8 9 0

TV CONTROL
Pressing down on this side on the cassette door
will open the tape deck SHIFT INPUT CHANNEL VOLUME 19
12
5.1ch DVD SURROUND SYSTEM XXD3060

D 20 MIC VOL
Controls the volume of the karaoke mics
21 MIC input jacks
22 PHONES jack
Headphone jack
1 STANDBY/ON ( )
Switches the player on or into standby
2 Function select buttons
Selects the source you want to listen to
3 DVD control buttons
E
AUDIO
Selects the audio channel or language

160 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

SUBTITLE 8 ENTER, TUNE & cursor control buttons

Selects a subtitle display Navigates on-screen displays and menus.
ENTER selects an option or executes a
ANGLE command.
Changes the camera angle during DVD
multi-angle scene playback 9 SOUND MODE
Adjusts the tone. Also use to adjust the balance
ZOOM (EV31DVD model only) and DSP controls
Changes the zoom level (EV61DVD model only)
4 DSP buttons (EV61DVD model) 10 Playback controls B
SURROUND 3 and 2 3
Use to select a surround mode Starts/resumes playback
1 and /e
ADVANCED
Use for reverse slow motion playback, frame
Use to select an Advanced surround mode reverse and reverse scanning


¡ and  / E
Sound Field buttons(EV31DVD model) Use for forward slow motion playback, frame
advance and forward scanning
SFC
Selects sound modes or custom settings ¢
from the Sound Field Control Jumps to the next chapter or track
C
4
VIRTL. SURR.
Jumps to the beginning of the current
Switches the Virtual Surround effect on or
chapter or track, then to previous chapters/
off
tracks
5 KARAOKE buttons 8
KARAOKE Pauses playback; press again to restart
Selects audio channels for karaoke 7
Stops playback
ECHO 11 Number buttons and SHIFT functions
Changes the echo level on the karaoke mics The number buttons can be used for selecting
D
tracks directly, the functions above the buttons
are accessed by pressing SHIFT at the same
KEYCON (SHIFT+KARAOKE/ECHO) time as the button.
Lowers/raises the pitch of the backing track
PROGRAM (SHIFT+1)
Use to program/play a program list
6 VOLUME
Adjusts the volume level REPEAT (SHIFT+2)
Selects a repeat play mode
7 HOME MENU
Press to display (or exit) the on-screen menu RANDOM (SHIFT+3)
for Initial Settings, Play Mode functions, etc. Selects a random play mode
SYSTEM SETUP (SHIFT+HOME MENU) TEST TONE (SHIFT+4) E
(EV61DVD model) (EV61DVD model only)
Use to make various system and surround Press to output the test tone for speaker
sound settings setup

XV-EV61 161
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

CH LEVEL (SHIFT+5) INPUT

(EV61DVD model only) Switches the TV input
Use to adjust the speaker level
CHANNEL +/–
SLEEP (SHIFT+6) Selects channels
Switches the sleep timer on or off
VOLUME +/–
CLEAR Adjusts the volume on the TV
Clears an entry
B
ENTER
Selects menu options, etc. (works exactly
the same as the ENTER button in 8 above) • Refer to Setting up the remote to control your
TV on to use these controls with your
12 SHIFT TV.
Press to access the functions/commands
written in green on the remote
13 SYSTEM DISP
Switches between information and clock
displays

C
DVD DISP (SHIFT+SYSTEM DISP)
Changes the information shown in the
display
14 MONO
Press to listen to a stereo FM broadcast in
mono (sound quality is usually improved)

15 MUTE
Mutes the volume
16 TIMER/CLOCK ADJ.
D Use for setting the clock , as well as for
setting and checking the timers
17 DVD MENU
Displays the DVD menu (for CDs, Video CD/
Super VCDs, and WMA/MP3 discs, the Disc
Navigator screen appears)
TOP MENU (SHIFT+DVD MENU)
Displays the top menu of a DVD disc
18 RETURN
Press to return to a previous menu screen
E
19 TV CONTROL

Switches the TV on or into standby

162 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8

Display
A
The front panel display for the EV61DVD model is 5 LINE REC (EV61DVD model only)
shown in the illustration below. Lights when the line recording mode is switched
on (see Recording mode on page 60).
1 6 RPT-1
2 RPTlights during repeat play (RPT-1lights
3 PGM RDM RPT ñ 1 MONO STEREO 14 during repeat one-track play)
4 ADV.SURR. SFC RDS TUNED 13
LINE 96kHz
7 SFC (EV31DVD model only)
5 REC
12 Lights when one of the Sound Field Control
listening modes is selected
6 7 8 9 10 11 B
8 Format indicator (EV61DVD model only)
These indicators will light according to which
channels are encoded on the Dolby Digital or
DTS multichannel disc currently in the player.
19 LFElights when the disc has an LFE channel.
SUB Wf
9 MONO
Lights when FM mono reception is selected

10
Lights during multi-angle scenes on a DVD disc
15
11 (EV31DVD model only) C
Lights when Virtual Surround is switched on

PRO LOGIC DIGITAL 18 12 96 kHz

Lights when a 96kHz source is detected
16 17
(may not light correctly if the source is copy–
protected)
20 21 22 23 24 25 26
2 NR B.CUT REC ASES
13 TUNED
ECHO KEY KARAOKE L R WAKEñ UP REC Lights when a broadcast is being received
32 31 30 29 28 27 14 STEREO
Lights when a stereo FM broadcast is being
1 Character display D
received in auto stereo mode
2 RDM 15 Level meter
Lights during random playback Shows the sound levels of the source selected
3 PGM 16 2 PRO LOGIC II (EV61DVD model only)
Lights during program play Lights during Dolby Pro Logic decoding
4 ADV. SURR. (EV61DVD model only) 17 2 DIGITAL
Lights when one of the Advanced Surround Lights during playback of a Dolby Digital signal
listening modes is selected
18 DTS (EV61DVD model only)
Lights during playback of a DTS source
E

XV-EV61 163
7
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4

A
19 Speaker and playback indicators • – Continuous playback (up to 16
The playback indicator ( 3) lights during complete plays)
playback, and the speaker indicators show
25 ASES
which speakers are being used to output the Lights during ASES recording
current source. The illustrations below show
some example displays. 26
Lights when the sleep timer is active
5.1 channel surround sound
SUB Wf with Extra Power mode or Extra 27 REC
Power Surround mode active Lights when the record timer is set and flashes
(EV61DVD model only) when the timer starts recording
B
5.1 channel surround sound 28
SUB Wf (EV61DVD model only) Lights when either timer is set and flashes when
they activate
29 WAKE-UP
Stereo (2.1 channel) sound (with Lights when the wake-up timer is set and flashes
SUB Wf subwoofer) when the wake-up timer activates
30 KARAOKE L R
Lights when one of the Karaoke modes is
5.1 channel surround sound
selected:
C SUB Wf with Dialogue enhancement
• KARAOKE(Vocal cancel) – Vocals in the
and the Virtual Surround Back
backing track are partially eliminated using
mode active (EV61DVD model EQ.
only)
• L – Left channel only. Use for tracks that
have a vocal recorded in the right channel.
(When headphones are connected, none of
the speaker indicators are lit.) • R – Right channel only. Use for tracks that
have a vocal recorded in the left channel.
20 2 NR • L R– Use to put a single-channel vocal track
Lights when Dolby Noise Reduction is on into the center of the mix.
21 B.CUT 31 KEY
D Lights when the beat cut mode has been Lights when the Karaoke pitch control is
switched to B.CUT 2 selected
22 REC 32 ECHO
Lights when recording to the tape deck Lights when the Karaoke ECHO effect is selected
23
Indicates the direction of tape playback
24
Indicates the reverse mode:
• – Single side playback
• – Auto-reverse playback: stops after
E finishing playback in the ‘reverse’ (2 )
direction

164 XV-EV61
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4