Scribd
Upload
480 views

TechSolve VizAdapter Data Sheet - Heidenhain CNC MTConnect Adapter

This document summarizes a Heidenhain CNC MTConnect adapter that allows Heidenhain iTNC 530 and newer CNC machines to integrate with MTConnect monitoring software. The adapter is compatible with MTConnect version 1.2 or 1.3 and provides data on linear axes positions and loads, spindle speeds and positions, tool and path information, and fault and message events. It requires the CNC to have Option 18 enabled and a minimum NC software version depending on the CNC model. The adapter is installed on a separate PC running Windows XP or newer that is connected to the CNC controller.

Uploaded by

Dörky Lefieuw
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
480 views

TechSolve VizAdapter Data Sheet - Heidenhain CNC MTConnect Adapter

This document summarizes a Heidenhain CNC MTConnect adapter that allows Heidenhain iTNC 530 and newer CNC machines to integrate with MTConnect monitoring software. The adapter is compatible with MTConnect version 1.2 or 1.3 and provides data on linear axes positions and loads, spindle speeds and positions, tool and path information, and fault and message events. It requires the CNC to have Option 18 enabled and a minimum NC software version depending on the CNC model. The adapter is installed on a separate PC running Windows XP or newer that is connected to the CNC controller.

Uploaded by

Dörky Lefieuw
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Heidenhain CNC MTConnect Adapter

Part Number: VA-HEI-1.2-0.0 Last Update: 11/23/2016


Description: MTConnect Adapter for Heidenhain iTNC 530 and newer CNCs
Device: Heidenhain iTNC530, 640 Resident On Device
Adapter OS: Windows XP or newer
MTConnect: Compatible with MTConnect Open Source C++ Agent, Version 1.2 or 1.3
Data Items: Samples:
• Linear Axes: Position, Load
• Spindle/Rotary Axes: Speed, Angle, Position, Load
• Path: Feedrate, Position
Events:
• Emergency Stop
• Controller: Message, Part Count, Path Feedrate Override, Spindle Speed Override
• Path: Execution, Controller Mode, Program, Sub Program, Tool Id, Line, Block
Conditions: Faults, Warnings, Messages
Assets:
• Identity: Tool Name, Tool Number
• Measurements: Functional Length LF (actual, nominal, min), Cutting Diameter (actual,
nominal, min, max)
• Properties: Status, Process Spindle Speed, Tool Life (min), Location (pot)
Options: Available per quote
Dependencies: • CNC Option 18 must be present
• For iTNC 530: NC version 340 49x 04 SP9 or above. Hardware MC 4xx unit may need an
updgrade to support 340 490x SP9.
• Upgrade available directly from Heidenhain only
• System Requirements for Adapter PC:
• OS: Windows XP or newer
• Processor: 2 GHz+
• Harddisk: 80GB
Required Info: • System Identifier Key (SIK) located on main computer (MC)
• NC S/W version
• Check if Option 18 is present:
• On the controller, go into program edit mode
• Press MOD
• Enter SIK in the Code Number edit control
• Check the option list and make sure Option 18 - HEIDENHAIN DNC is checked.
• If the option is not checked, provide the SIK number to the left. TechSolve will quote
this with the Adapter.
To Note: iTNC 430, Mold plus and older cannot use this Adapter.

All VizAdapters are provided as Software Licenses. All rights to compiled or source code
remain strictly with TechSolve unless otherwise agreed in writing.

You might also like