Codes
Codes
Trouble Trouble
Detail of trouble Detail of trouble
code code
KA Disconnection L4 ON/OFF signals do not agree with each other
KB Short circuit L6 Operation state and stop state do not agree with signals
KK Lowering of source voltage (Input) L8 Analog signals do not agree with each other
KQ Disagreement of model selection signals LC Speed signals do not agree with each other
Communication defective (Abnormality
KR LD Switch is pressed for long time
in objective component)
KT Internal defect of controller LH When command current is turned ON, fill signal is turned OFF
KX Out of input signal range MA Malfunction
KZ Disconnection or short circuit MB Lowering of function
L0 Double engagement MW Slip
When command current is turned OFF,
L1 NS Overheating
fill signal is turned ON
L2 Fuel pressure is too high ZG Lowering of oil pressure
L3 Objective part cannot be controlled ZK Lowering of level
a Controller in the table indicates classification of the controller in charge of system check, monitor panel,
and code.
MON: Fault code of electric system checked by monitor panel
ENG: Fault code of electric system checked by engine controller
T/M: Fault code of electric system checked by transmission controller
S/T: Fault code of electric system checked by steering controller
Machine: Fault code of mechanical system
20-170 D275AX-5
(11)
1