Scribd
Upload
162 views

Sand Filtration PDF

Slow sand filtration is a household water treatment method that uses layers of sand and gravel in a container to filter water. As water passes through the sand, a bioactive layer forms on the surface of the sand that reduces bacteria and protozoa. Field studies show slow sand filtration reduces E. coli by 80-98% and laboratory tests show over 99% protozoan reduction. Health impact studies found it reduced diarrhea incidence by 44-47%. Proper maintenance of the filter and safe storage of treated water is required for effectiveness. Slow sand filtration is most appropriate where initial costs can be subsidized and education provided for use and maintenance.

Uploaded by

Bernadette Tumacder Magana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
162 views

Sand Filtration PDF

Slow sand filtration is a household water treatment method that uses layers of sand and gravel in a container to filter water. As water passes through the sand, a bioactive layer forms on the surface of the sand that reduces bacteria and protozoa. Field studies show slow sand filtration reduces E. coli by 80-98% and laboratory tests show over 99% protozoan reduction. Health impact studies found it reduced diarrhea incidence by 44-47%. Proper maintenance of the filter and safe storage of treated water is required for effectiveness. Slow sand filtration is most appropriate where initial costs can be subsidized and education provided for use and maintenance.

Uploaded by

Bernadette Tumacder Magana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Household Water Treatment

Slow Sand Filtration

Household Water Treatment and Safe Storage in Developing Countries


Studies have shown that household water treatment and safe storage interventions improve water quality and reduce
diarrheal disease incidence in developing countries. Five of these proven options – chlorination, solar disinfection,
ceramic filtration, slow sand filtration, and flocculation/disinfection – are widely implemented in developing countries.
The decision of selecting which options are most appropriate for a community is often difficult, depending on existing
water and sanitation conditions, cultural acceptability, implementation feasibility, availability of technology, and other
local conditions. This series of technical bulletins is designed to assist organizations in comparing and selecting the most
appropriate options.
Slow Sand Filtration
A slow sand filter is a sand filter adapted for household use. Please note that although commonly
referred to as the BioSand Filter, the BioSand Filter terminology is trademarked to one particular
design, and this fact sheet encompasses all slow sand filters. The version most widely implemented
consists of layers of sand and gravel in a concrete or plastic container approximately 0.9 meters tall
and 0.3 meters square. The water level is maintained to 5-6 cm above the sand layer by setting the
height of the outlet pipe. This shallow water layer allows a bioactive layer to grow on top of the sand,
which contributes to the reduction of disease-causing organisms. A diffuser plate is used to prevent
disruption of the biolayer when water is added. To use the filter, users simply pour water into the
top, and collect finished water out of the outlet pipe into a bucket. Over time, especially if source
water is turbid, the flow rate can decrease. Users can maintain flow rate by cleaning the filter
through agitating the top level of sand, or by pre-treating turbid water before filtration.

Lab Effectiveness, Field Effectiveness, and Health Impact


Slow sand filter lab effectiveness studies with a mature biolayer have shown 99.98% protozoan, 90-
99% bacterial, and variable viral reduction. Field effectiveness studies have documented E. coli
removal rates of 80-98%. Two health impact studies report 44-47% reduction of diarrheal disease
Slow sand filter schematic incidence in users. Experience has shown proper filter maintenance is necessary for optimal
CAWST performance so proper user training and follow-up is critical to filter success. Since the filter is
typically used without subsequent chlorination, training users to properly care for and maintain the
safe storage container is necessary.

Benefits, Drawbacks, and Appropriateness


The benefits of Slow Sand Filtration are:
 Proven reduction of protozoa and most bacteria
 High flow rate of up to 0.6 liters per minute
 Simplicity of use and acceptability
 Visual improvement of the water
 Production of sufficient quantities of water for all household uses
 Local production (if cleaned, appropriate sand is available)
 One-time installation with low maintenance requirements
 Long life (estimated >10 years) with no recurrent expenses

The drawbacks of Slow Sand Filtration are:


 Not as effective against viruses
 No residual protection-- can lead to recontamination
 Routine cleaning can harm the biolayer and decrease effectiveness Commercially available slow sand filter
 Difficult to transport due to weight-- high initial cost Hydraid

Slow sand filtration is most appropriate where there is funding to subsidize the initial filter cost, available education for use and
maintenance, locally-available sand, and a transportation network able to move the filter.

National Center for Emerging and Zoonotic Infectious Diseases


Division of Foodborne, Waterborne, and Environmental Diseases
Implementation Examples

The BioSand Filter was designed by Dr. David Manz at the University of Calgary.

Samaritan’s Purse is a non-governmental organization (NGO) that implements the


BioSand Filter through their Household Water Program by providing managerial and
technical assistance as well as project funding to field partners. Since 1998, Samaritan’s
Purse has assisted in establishing BioSand Filter projects in 24 countries. As of April 2010,
over 116,000 have been installed worldwide.
Samaritan’s Purse’s largest partner, Hagar International, is operating in rural Cambodia
installing 15,000 BioSand Filters per year. Hagar invites those interested in receiving a
filter to a training meeting where they sign up to receive a filter, are asked to contribute
a small amount to their filter ownership, attend group trainings on filter use and hygiene,
and send one family member to assist with the construction and transportation of the
filter. Samaritan’s Purse has developed an implementation manual and has technical
support staff to assist BioSand Filter projects across the world.
Recently, Dr. Manz has licensed the plastic version of the BioSand Filter to the NGO
Hydraid. They manufacture the plastic containers in Michigan and Honduras, and work
with local implementing organizations to import the plastic containers, create the sand
filter, and educate users. Pure Water for the World is another NGO working with a
different plastic slow sand filter container, made locally in Haiti and Honduras and is also
implemented with the help of local organizations.
There are several training centers that promote the SSF. The NGOs Centre for Affordable
Water and Sanitation Technology (CAWST) and BushProof both offer training,
implementation manuals, and assistance to organizations interested in starting SSF Locally-made concrete slow sand filter
programs. Pure Water for the World

Economics and Scalability


The average slow sand filter’s construction cost ranges from $15-$60, depending on whether local or imported materials are
used. Filter programs are either fully subsidized or operated at partial cost recovery (with users paying $2-$10) using donor
funds. Community motivation, distribution, education, and follow-up can add significantly to program costs. For Samaritan’s
Purse, the average overall cost is about $100 USD per filter. Assuming it lasts 10 years and families filter 40 liters per day, the cost
per liter of treated water is 0.068 US cents. Some NGOs have worked to train local entrepreneurs to manufacturer, promote, and
sell the filters within their communities, although this has met with limited success due to high initial filter expense and difficulty
in identifying appropriate local entrepreneurs. Commercial implementation models are currently being explored.

For more information about household water


treatment systems visit:
http://www.cdc.gov/safewater
or
http://www.who.int/household_water/

For more information about slow sand filtration


systems for developing countries visit:
http://www.manzwaterinfo.ca
http://www.cawst.org
http://www.bushproof.org
http://www.hydraid.org
http://www.purewaterfortheworld.com
http://www.samaritanspurse.ca/ourwork/water/ Slow sand filter system in Haiti
Pure Water for the World

You might also like