Scribd
Upload
62 views

Topics For Computer Based Test For Various Posts: AE/ Electrical & JE/ Electrical

The document provides details on the topics that will be covered in the computer-based test for various positions at IRCON International Limited. For Assistant Engineer/Electrical and Junior Engineer/Electrical positions, topics will include basic electrical concepts like circuits, laws, power calculations and network theorems as well as more advanced topics on capacitance, induction, batteries, instruments and measurement, AC and DC systems, transformers, motors, substations and more. For Assistant Manager/HRM and Assistant Officer/HRM roles, the test will evaluate knowledge of areas like strategic HR, industrial relations, training, recruitment, labor laws, performance management, organizational behavior, diversity, change management and more. Finally,

Uploaded by

ravi shankar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
62 views

Topics For Computer Based Test For Various Posts: AE/ Electrical & JE/ Electrical

The document provides details on the topics that will be covered in the computer-based test for various positions at IRCON International Limited. For Assistant Engineer/Electrical and Junior Engineer/Electrical positions, topics will include basic electrical concepts like circuits, laws, power calculations and network theorems as well as more advanced topics on capacitance, induction, batteries, instruments and measurement, AC and DC systems, transformers, motors, substations and more. For Assistant Manager/HRM and Assistant Officer/HRM roles, the test will evaluate knowledge of areas like strategic HR, industrial relations, training, recruitment, labor laws, performance management, organizational behavior, diversity, change management and more. Finally,

Uploaded by

ravi shankar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

IRCON INTERNATIONAL LIMITED

(A Public Sector Undertaking under the Ministry of Railways)


Regd. Office: C-4, District Centre, Saket, New Delhi-110 017 (India)
Tel.: +91-11-29565666, Fax: +91-11-26854000,26522000
(CIN – U45203DL1976GOI008171)
Web: www.ircon.org

Topics for Computer Based Test for various posts:

AE/ Electrical & JE/ electrical

S.No. Topic Description


1
Electric circuit, ohm's law, Kirchhoff's law, Calculation of KVA,
KW, KVAr power, and network theorems
2 Capacitance and inductance
3 Electromagnetic Induction
4 Batteries and battery charger
5 Electrical Instruments and Measurement
6 A.C Fundamentals
AC power supply
DC power supply
Transformer
Motors
Sub station and protection system
Transmission and distribution system
Earthing system
SCADA
7 Industrial application of electric motors
8 Power electronics

AM/HRM & AO/ HRM


S.No. Topic/Area
1. Strategic Human Resources Management
2. Industrial Relations
3. Training and Development
4. Recruitment & Selection
5. Labour Legislation
6. Performance Appraisal & Compensation Management
7. Organizational Behavior
8. Emerging trends in HRM including Competency Mapping
9. Managing Diverse Workforce
10. Change Management & Organizational Development
11. Cross Cultural Management
12. Manpower Planning
13. Employee Misconduct & Disciplinary procedure
14. Job Description & Job Analysis
15. Employee Welfare

Assistant Engineer(S&T)

1 . Basic Electronics Engineering:


Basics of semiconductors; Diode/Transistor basics and characteristics; Diodes for different
uses; Junction & Field Effect Transistors (BJTs, JFETs, MOSFETs); Transistor amplifiers of
different types, oscillators and other circuits; Basics of Integrated Circuits (ICs); Bipolar,
MOS and CMOS ICs; Basics of linear ICs, operational amplifiers and their applications-
linear/non-linear; Optical sources/detectors.

2. Basic Electrical Engineering:


DC circuits-Ohm’s & Kirchoff’s laws, mesh and nodal analysis; Electro-magnetism,
Faraday’s & Lenz’s laws, induced EMF and its uses; Single-phase AC circuits; Transformers,
efficiency; Basics-DC machines, induction machines, and synchronous machines; Electrical
power sources- basics: hydroelectric, thermal, nuclear, wind, solar.

3. Electronic Measurements and Instrumentation:


Principles of measurement, accuracy, precision and standards; Analog and Digital systems
for measurement, measuring instruments for different applications; Different types of
transducers and displays.

4. Power Electronics and Electrical Storage Devices and Power converters:


Basics of Power Electronics, Basics about Power devices such as thyristors/ SCRs; Electrical
Storage Devices- Primary and Secondary Cells; Power Converters- DC-AC
Converters(Inverters), AC-DC Converters(Rectifiers).

5. Analog and Digital Circuits:


Small signal equivalent circuits of diodes, BJTs and FETs; Diode circuits for different uses;
Biasing & stability of BJT & JFET amplifier circuits; Analysis/design of amplifier-
single/multi-stage; Feedback & uses; Active filters, timers, multipliers, wave shaping, A/D-
D/A converters; Logic gates, Digital IC families, Combinatorial/sequential circuits; Basics of
multiplexers, counters /registers/ memories /microprocessors, design & applications.

6. Analog and Digital Communication Systems:


Analog versus digital communication & applications: Systems- AM, FM,
transmitters/receivers, SNR comparison; Digital communication basics: Sampling,
quantizing, coding, PCM, DPCM, multiplexing-audio/video; Digital modulation: ASK, FSK,
PSK; Multiple access: TDMA, FDMA, CDMA
7. Computer Organization and Architecture:
Basic architecture, CPU, I/O organisation, memory organisation, peripheral devices, trends;
Hardware /software issues; Data representation & Programming; Operating systems-
basics, processes, characteristics, applications; Memory management, virtual memory, file
systems, protection & security; Data bases, different types, characteristics and design;
Elements of programming languages.

8. Electro Magnetics:
Wave propagation through different media; Transmission Lines-different types, basics,
Smith’s chart, impedance matching/transformation, S-parameters, uses; Waveguides-
basics, rectangular types, modes, cut-off frequency ; Antennas-radiation pattern,
monopoles/dipoles, gain, arrays-active/passive, theory, uses.

9. Advanced Electronics Topics:


VLSI technology: Processing, lithography, interconnects, packaging, testing;
Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing;
Controllers & uses; Embedded systems.

10. Advanced Communication Topics:


Communication networks: Principles /practices /technologies /uses /OSI model/security;
Basic packet multiplexed streams/scheduling; Cellular networks, GSM, CDMA , protocols
(TCP/TCPIP); Basics of RADAR & Satellite Communication and uses; Optical
communication: fibre optics.

Junior Engineer(S&T) & Junior Engineer(S&T)- Design

1 . Electronic Devices and Circuits:


Basics of semiconductors and devices; Diode/Transistor/ BJT/ JFET/ MOSFET.

2. Electrical Circuits and Instrumentation:


DC circuits-Ohm’s & Kirchoff’s laws, mesh and nodal analysis; Electro-magnetism,
Faraday’s & Lenz’s laws, induced EMF and its uses; Analog and Digital systems for
measurement, measuring instruments for different applications; Basics of Transducers and
applications in instrumentation; Basics of batteries (Primary and Secondary) and their
uses.

3. Electrical Machines:
Basics of Electrical Machines- Motors, Transformers, etc; Electrical power sources- basics:
hydroelectric, thermal, nuclear, wind, solar.

4. Power Electronics:
Basics of Power Electronics, Basics of Power devices such as Thyristors/ SCRs.

5. Industrial Electronics and Linear Integrated Circuits


Electronics Fundamentals, Resistance and Basic Circuit laws, Electromagnetics and
Inductance, capacitance, AC resistive, capacitive and inductive circuits, semiconductor
devices, Photoelectronics (LED and Photodiode), Basics of Meters such as Voltmeter,
Ammeter, Multimeter, etc.

6.Linear Integrated Circuits


Basics of few linear Integrated Circuits as Opamp, 555 timer and applications.

7.Digital Electronics:
Logic gates, Digital IC families, Combinatorial/sequential circuits; Basics of multiplexers,
counters /registers/ memories /microprocessors, design & applications.

8. Communication Engineering:
Analog Vs Digital communication & applications: Systems- AM, FM, transmitters/receivers;
Digital communication basics: Sampling, quantizing, coding, PCM, DPCM, multiplexing-
audio/video; Digital modulation: ASK, FSK, PSK; Multiple access: TDMA, FDMA, CDMA.

9. Computer Hardware and Network:


Basics of Computer architecture, CPU I/O organization, computer memory concepts, Basic
computer networking, topologies, network components such as repeaters, bridges, routers,
etc.

10. Electro Magnetics:


Wave propagation through different media; Transmission Lines-basics; Waveguides-basics,
rectangular types, modes, cut-off frequency; Antennas-basics, types of antennas.

11. VLSI:
VLSI technology: Processing, lithography, interconnects, packaging, testing.

12. Microcontrollers and Embedded Systems:


Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing;
Controllers & uses; Embedded systems.

13. Advanced Communication Topics:


Communication networks: Principles /practices /technologies /uses /OSI model/security;
Basic packet multiplexed streams/scheduling; Cellular networks, GSM, CDMA , protocols
(TCP/TCPIP); Basics of RADAR & Satellite Communication and uses; Optical
communication: fibre optics.

Note: The above mentioned topics are indicative in nature and only covers
broad areas. However, Question Paper may comprise questions from other areas
also.

You might also like