0% found this document useful (0 votes)

203 views

MICS Analyzer Option For DB2 ENU

MICS Analyzer Option for DB2 ENU

Uploaded by

Marco Cocchi

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

203 views

MICS Analyzer Option For DB2 ENU

MICS Analyzer Option for DB2 ENU

Uploaded by

Marco Cocchi

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 545

CA MICS® Resource

Management

Analyzer Option for DB2 Guide

Release 12.6.00
This documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as
the “Documentation”) is for your informational purposes only and is subject to change or withdrawal by CA at any time.
This Documentation may not be copied, transferred, reproduced, disclosed, modified or duplicated, in whole or in part, without
the prior written consent of CA. This Documentation is confidential and proprietary information of CA and may not be disclosed
by you or used for any purpose other than as may be permitted in (i) a separate agreement between you and CA governing
your use of the CA software to which the Documentation relates; or (ii) a separate confidentiality agreement between you and
CA.
Notwithstanding the foregoing, if you are a licensed user of the software product(s) addressed in the Documentation, you may
print or otherwise make available a reasonable number of copies of the Documentation for internal use by you and your
employees in connection with that software, provided that all CA copyright notices and legends are affixed to each reproduced
copy.
The right to print or otherwise make available copies of the Documentation is limited to the period during which the applicable
license for such software remains in full force and effect. Should the license terminate for any reason, it is your responsibility to
certify in writing to CA that all copies and partial copies of the Documentation have been returned to CA or destroyed.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CA PROVIDES THIS DOCUMENTATION “AS IS” WITHOUT WARRANTY OF ANY
KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT. IN NO EVENT WILL CA BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE,
DIRECT OR INDIRECT, FROM THE USE OF THIS DOCUMENTATION, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
INVESTMENT, BUSINESS INTERRUPTION, GOODWILL, OR LOST DATA, EVEN IF CA IS EXPRESSLY ADVISED IN ADVANCE OF THE
POSSIBILITY OF SUCH LOSS OR DAMAGE.
The use of any software product referenced in the Documentation is governed by the applicable license agreement and such
license agreement is not modified in any way by the terms of this notice.
The manufacturer of this Documentation is CA.
Provided with “Restricted Rights.” Use, duplication or disclosure by the United States Government is subject to the restrictions
set forth in FAR Sections 12.212, 52.227-14, and 52.227-19(c)(1) - (2) and DFARS Section 252.227-7014(b)(3), as applicable, or
their successors.
Copyright © 2011 CA. All rights reserved. All trademarks, trade names, service marks, and logos referenced herein belong to
their respective companies.
Contact CA Technologies
Contact CA Support

For your convenience, CA Technologies provides one site where you can access the
information you need for your Home Office, Small Business, and Enterprise CA
Technologies products. At http://ca.com/support, you can access the following:
■ Online and telephone contact information for technical assistance and customer
services
■ Information about user communities and forums
■ Product and documentation downloads
■ CA Support policies and guidelines
■ Other helpful resources appropriate for your product

Provide Feedback

If you have comments or questions about CA Technologies product documentation, you

can send a message to [email protected].

If you would like to provide feedback about CA Technologies product documentation,

complete our short customer survey, which is available on the CA Support website at
http://ca.com/docs.
Contents
Chapter 1: OVERVIEW 11
1.1 Primary Areas of Application .................................................................. 14
1.2 Reporting and Inquiry Facilities ................................................................ 16
1.2.1 Management Control Reports ............................................................ 17
1.2.2 Exception Analyzer Reports .............................................................. 18
1.3 Files Overview .............................................................................. 19
1.4 Product Prerequisites ........................................................................ 23

Chapter 2: USAGE GUIDELINES 25

2.1 Data Analysis ............................................................................... 26
2.2 CA MICS Product Interfaces ................................................................... 30
2.2.1 Accounting and Chargeback Interface ..................................................... 31
2.2.2 Capacity Planner Interface............................................................... 33

Chapter 3: REPORTS 37
3.1 Tabular Reports Overview .................................................................... 38
3.1.1 Producing Tabular Reports .............................................................. 40
3.1.2 DB2 System Services Report ............................................................. 42
3.1.3 DB2 Data Base Services Report ........................................................... 56
3.1.4 DB2 Accounting Report ................................................................. 76
3.1.5 DB2 Calendar Report ................................................................... 89
3.1.6 DB2 Plan Performance Summary Report ................................................... 93
3.1.7 DB2 Plan Performance Report............................................................ 98

Chapter 4: EXCEPTIONS 123

4.1 Introduction To Exception Reporting .......................................................... 124
4.2 Standard Exceptions For The DB2 Analyzer ..................................................... 127
4.3 Exception Descriptions ...................................................................... 129
10000 Instrumentation Buffer Error .......................................................... 130
10001 Instrumentation Not Active Error ....................................................... 131
10002 Instrumentation Record Not Accepted................................................... 132
10003 Instrumentation Writer Failure ......................................................... 133
10004 Record Unsuccessfully Written ......................................................... 134
10005 System IFCID Record Not Written ....................................................... 135
10006 System IFCID Record Not Desired ....................................................... 136

Contents 5
10007 System IFCID Buffer Not Available ...................................................... 137
10008 System IFCID Collection Failure ......................................................... 138
10009 Data Base IFCID Record Not Written .................................................... 139
10010 Data Base IFCID Record Not Desired .................................................... 140
10011 Data Base IFCID Buffer Not Available .................................................... 141
10012 Data Base IFCID Collection Failure ...................................................... 142
10013 User IFCID Record Not Written ......................................................... 143
10014 User IFCID Record Not Desired ......................................................... 144
10015 User IFCID Buffer Not Available ........................................................ 145
10016 User IFCID Collection Failure ........................................................... 146
10017 Successful Abort ..................................................................... 147
10018 Indoubt Thread ...................................................................... 148
10019 End Of Task Abend ................................................................... 149
10020 End Of Memory ..................................................................... 150
10021 Start Data Base Command ............................................................. 151
10022 Start Trace Command ................................................................ 152
10023 Start DB2 Command .................................................................. 153
10024 Stop Data Base Command ............................................................. 154
10025 Stop Trace Command ................................................................. 155
10026 Stop DB2 Command .................................................................. 156
10027 Unavailable Resource Failure .......................................................... 157
10028 Allocation Deadlock Failure ............................................................ 158
10029 Invalid Resource Failure ............................................................... 159
10030 Error Return from GETMAIN/FREEMAIN ................................................. 160
10031 Short On Storage Contractions ......................................................... 161
10032 Short On Storage Detected ............................................................ 162
10033 Short On Storage Abend .............................................................. 163
10040 Reads Delayed Archive Allocation ....................................................... 164
10041 ICF Checkpoints Taken ................................................................ 165
10042 Instrumentation Buffer Error .......................................................... 166
10043 Instrumentation Buffer Error .......................................................... 167
10044 Instrumentation Buffer Error .......................................................... 168
10045 Instrumentation Buffer Error .......................................................... 169
10046 Instrumentation Not Active Error ....................................................... 170
10047 Instrumentation Not Active Error ....................................................... 171
10048 Instrumentation Not Active Error ....................................................... 172
10049 Instrumentation Not Active Error ....................................................... 173
10050 Create Tablespace Statement .......................................................... 174
10051 Create Data Base Statement ........................................................... 175
10052 Drop Tablespace Statement ........................................................... 176
10053 Drop Data Base Statement ............................................................ 177
10054 Allocate Requests A Nonexistent Plan ................................................... 178

6 Analyzer Option for DB2 Guide

10055 Binds Without Plan ID ................................................................ 179
10057 Storage Shortage Expansion Failure - Pool 0 .............................................. 180
10059 Storage Shortage Expansion Failure – Pool 1 .............................................. 181
10061 Storage Shortage Expansion Failure - Pool 2 .............................................. 182
10063 Storage Shortage Expansion Failure - Pool 3 .............................................. 183
10064 Read Pagefixed Without Real Storage -Pool 0 ............................................. 184
10065 Write Pagefixed Without Real Storage - Pool 0 ............................................ 185
10066 Read Pagefixed Without Real Storage - Pool 1 ............................................ 186
10067 Write Pagefixed Without Real Storage - Pool 1 ............................................ 187
10068 Read Pagefixed Without Real Storage - Pool 2 ............................................ 188
10069 Write Pagefixed Without Real Storage - Pool 2 ............................................ 189
10070 Read Pagefixed Without Real Storage - Pool 3 ............................................ 190
10071 Write Pagefixed Without Real Storage - Pool 3 ............................................ 191
10072 NO. Lock Escalations to Exclusive Mode .................................................. 192
10073 Maximum Number of Page Locks Held................................................... 193
10074 Prefetch Disabled No Read Engine Buffer 0 ............................................... 194
10075 Prefetch Disabled No Read Engine Buffer 0 ............................................... 195
10076 NO. Times Write Engine Unavailable Buffer 0 ............................................. 196
10077 NO. Times Deferred Write Threshold Buffer 0 ............................................. 197
10078 NO. Times WPHFWT Threshold Reached Buffer 0 .......................................... 198
10079 Prefetch Disabled No Read Engine Buffer 1 ............................................... 199
10080 Prefetch Disabled No Read Engine Buffer 1 .............................................. 200
10081 NO. Times Write Engine Unavailable Buffer 1 ............................................. 201
10082 NO. Times Deferred Write Threshold Buffer 1 ............................................. 202
10083 NO. Times WPHFWT Threshold Reached Buffer 1 .......................................... 203
10084 Prefetch Disabled No Read Engine Buffer 2 ............................................... 204
10085 Prefetch Disabled No Read Engine Buffer 2 ............................................... 205
10086 NO. Times Write Engine Unavailable Buffer 2 ............................................. 206
10087 NO. Times Deferred Write Threshold Buffer 2 ............................................. 207
10088 NO. Times WPHFWT Threshold Reached Buffer 2 .......................................... 208
10089 Prefetch Disabled No Read Engine Buffer 3 ............................................... 209
10090 Prefetch Disabled No Read Engine Buffer 3 ............................................... 210
10091 NO. Times Write Engine Unavailable Buffer 3 ............................................. 211
10092 NO. Times Deferred Write Threshold Buffer 3 ............................................. 212
10093 NO. Times WPHFWT Threshold Reached Buffer 3 .......................................... 213
10094 NO. Failures Due to Full EDM Pool ...................................................... 214
10095 Instrumentation Record Not Accepted................................................... 215
10096 Instrumentation Record Not Accepted................................................... 216
10097 Instrumentation Record Not Accepted................................................... 217
10098 Instrumentation Record Not Accepted................................................... 218
10099 Instrumentation Writer Failure ......................................................... 219
10100 Instrumentation Writer Failure ......................................................... 220

Contents 7
10101 Instrumentation Writer Failure ......................................................... 221
10102 Instrumentation Writer Failure ......................................................... 222
10103 Record Unsuccessfully Written ......................................................... 223
10104 Record Unsuccessfully Written ......................................................... 224
10105 Record Unsuccessfully Written ......................................................... 225
10106 Record Unsuccessfully Written ......................................................... 226

Chapter 5: FILES 227

5.1 Introduction ............................................................................... 228
5.2 DB2 System Activity (DB2DSY) File ............................................................ 229
5.2.1 File Organization ...................................................................... 230
5.2.2 Data Element List ..................................................................... 231
5.2.3 Usage Considerations.................................................................. 240
5.3 DB2 Data Base Activity (DB2DSD) File .......................................................... 242
5.3.1 File Organization ...................................................................... 243
5.3.2 Data Element List ..................................................................... 244
5.3.3 Usage Considerations.................................................................. 255
5.4 DB2 User Activity (DB2DSU) File .............................................................. 257
5.4.1 File Organization ...................................................................... 258
5.4.2 Data Element List ..................................................................... 259
5.4.3 Usage Considerations.................................................................. 266
5.5 DB2 Plan Activity (DB2DSP) File ............................................................... 268
5.5.1 File Organization ...................................................................... 269
5.5.2 Data Element List ..................................................................... 270
5.5.3 Usage Considerations.................................................................. 278
5.6 DB2 System Activity Suspend (DB2_DS) File ..................................................... 279
5.7 DB2 Data Base Activity Suspend (DB2_DD) File .................................................. 280
5.8 DB2 System DDF Statistics (DB2DDY) File ....................................................... 280
5.8.1 File Organization ...................................................................... 281
5.8.2 Data Element List ..................................................................... 282
5.8.3 Usage Considerations.................................................................. 285
5.9 DB2 User DDF Activity (DB2DDU) File .......................................................... 287
5.9.1 File Organization ...................................................................... 288
5.9.2 Data Element List ..................................................................... 289
5.9.3 Usage Considerations.................................................................. 292
5.10 DB2 Plan DDF Activity (DB2DDP) File ......................................................... 294
5.10.1 File Organization .................................................................... 295
5.10.2 Data Element List .................................................................... 296
5.10.3 Usage Considerations ................................................................ 299
5.11 DB2 System DDF Suspend (DB2_SH) File ...................................................... 301
5.12 DB2 Package/DBRM Activity (DB2DPP) File .................................................... 301

8 Analyzer Option for DB2 Guide

5.12.1 File Organization .................................................................... 302
5.12.2 DB2DPP Data Elements List ............................................................ 304
5.12.3 DB2DPP Usage Considerations ......................................................... 306
5.13 DB2 Buffer Pool Activity (DBPDSB) File ........................................................ 306
5.13.1 File Organization .................................................................... 307
5.13.2 Data Element List .................................................................... 308
5.13.3 Usage Considerations ................................................................ 311
5.14 DB2 User Buffer Pool Activity File ............................................................ 313
5.14.1 File Organization .................................................................... 314
5.14.2 Data Element List .................................................................... 315
5.14.3 Usage Considerations ................................................................ 317
5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File .................................................... 318
5.15.1 File Organization .................................................................... 319
5.15.2 Data Element List .................................................................... 320
5.15.3 Usage Considerations ................................................................ 322
5.16 DB2 Buffer Pool Suspend (DBP_DB) File ....................................................... 323

Chapter 6: DATA SOURCES 325

6.1 Data Collection Considerations ............................................................... 326
6.2 Data Sources Supported ..................................................................... 327
6.3 Data Element/Data Source Cross-Reference .................................................... 328
6.4 Query CP Parallelism Considerations .......................................................... 376
6.4.1 Collecting Query CP Parallelism Information ............................................... 377
6.4.2 Parallel Tasks Data Analysis ............................................................. 378
6.5 ACCUMACC Roll-up Records ................................................................. 398
6.5.1 ACCUMACC and DB2 Region Level Files ................................................... 400
6.5.2 ACCUMACC and Transaction Level Files ................................................... 401
6.6 CA MICS and CA SMF Director Interface ........................................................ 405

Chapter 7: PARAMETERS 407

7.1 Environmental Considerations ................................................................ 408
7.2 Complex Level Parameters ................................................................... 409
7.2.1 DB2GENIN Customization .............................................................. 410
7.2.2 Account Code Structure (DB2ACCT) ...................................................... 414
7.2.3 Account Code Derivation Routine (DB2ACRT) .............................................. 419
7.3 Unit Level Parameters ...................................................................... 421
7.3.1 DB2 Processing Options (DB2OPS) ....................................................... 422
7.3.2 INPUTRDR and INPUTDB2 PARMS Members ............................................... 486
7.3.3 Database Space Modeling (DBMODEL) ................................................... 490

Contents 9
Chapter 8: INSTALLATION 493

Chapter 9: PROCESSING 495

9.1 Processing Requirements .................................................................... 496
9.2 Collector Options And Operation ............................................................. 497
9.3 Data Integrity Considerations ................................................................ 498

Chapter 10: MODIFICATION 499

10.1 Modification Checklists .................................................................... 499
10.1.1 Activate DB2 Plan Activity Files (DB2DSP, DB2DDP) ........................................ 500
10.1.2 Implement Incremental Update ........................................................ 502
10.1.3 Alter the Active Timespans for a File .................................................... 503
10.2 Standard User Exits ........................................................................ 505
10.2.1 Input Exits .......................................................................... 508
10.2.2 Parameter-Related Exits .............................................................. 511
10.2.3 Output Exits ........................................................................ 512

Appendix A: MESSAGES 519

Appendix B: DATA DICTIONARY 545

10 Analyzer Option for DB2 Guide

Chapter 1: OVERVIEW
As the number of I/S sites using IBM's DB2 relational
database management system continues to grow, the need to
systematically plan, control, and evaluate the DB2
environment is becoming increasingly important. With this in
mind, IBM developed a DB2 interface with SMF (System
Management Facility) to produce SMF records that contain, in
varying degrees of detail, performance and utilization
information for the DB2 environment.

The CA MICS Analyzer Option for DB2 processes DB2 SMF data,
including information about

o system
o subsystem
o database
o user activity
o plans, packages, and database request modules
o data sharing

The DB2 Analyzer enables you to display information on

selected users, user groupings, databases, and other
criteria or categories of activity. It also tracks system
problems and can perform an in-depth audit of users of
various DB2 facilities. In addition, the DB2 Analyzer
produces a series of management and operational reports that
can be tailored for all management levels. It also offers
online data access through the CA MICS Information Center
Facility (MICF), a full-screen, menu-based processor that
enables you to analyze data, create and execute inquiries,
retrieve data, and run reports.

The DB2 Analyzer supports standard CA MICS processing of DB2

SMF system and accounting data. Like the other data
integration applications, it processes raw data for analyzing
and managing specific technologies. Because CA MICS stores
data in a format that is common to all CA MICS products, you
can use standard CA MICS facilities to integrate DB2 Analyzer
data with any other data that CA MICS maintains.

Figure 1-1 illustrates the DB2 Analyzer data flow.

Chapter 1: OVERVIEW 11
1.1 Primary Areas of Application

CA MICS Data CA MICS CA MICS

Data Integration Database Management
Source Product Information Support Output
Areas Applications

+-----------+
| Acctg and |
+---------------+ |Chargeback |
| |--->+-----------+
| | +-----------+ +-----------+
+-------------+ | |--->| Capacity |--->| Inquiries |
+------+ | | | | | Planner | | |
| SMF | | DB2 | | +-----------+ | +-----------+ +-----------+
| |--->| Analyzer |-->| | DB2 | | +-----------+
| | | | | +-----------+ |--->|Performance|
+------+ | | | | | Manager |
+-------------+ | | +-----------+
| |
+---------------+

Figure 1-1. CA MICS Analyzer Option for DB2 Data Flow

The DB2 Analyzer integrates the DB2 activity and utilization

data collected in SMF records into the CA MICS database.
This process creates the DB2 information area, which
interfaces with a number of other CA MICS products including:

o CA MICS Accounting and Chargeback - The data provided to

CA MICS Accounting and Chargeback supports accounting for
consumed resources (for example, CPU time), logical I/Os
(for example, the number of Insert, Update, and Delete
statements), or almost any other measure of resource
utilization.

o CA MICS Capacity Planner - The CA MICS Analyzer Option for

DB2 maintains a database of detail and summarized DB2
usage and performance data that the Capacity Planner can
use to make historical growth/trend projections. These

12 Analyzer Option for DB2 Guide

1.1 Primary Areas of Application

projections can be made at all information levels,

including the system level, a specific application plan
grouping level, or the organizational structure level.

o CA MICS Performance Manager - The CA MICS Performance

Manager uses data provided by the DB2 Analyzer as part of
the system tuning effort. In addition, you can use the
workload characterization tools and methodology provided
in the CA MICS Performance Manager to perform DB2 workload
analyses.

Because CA MICS database files are summarized in the same

manner across all products, DB2 information can be easily
combined with information from other data sources. Combining
data from multiple data sources allows you to compare and
correlate DB2 information with system and other application-
specific information such as data from TSO, CICS, IMS, and
Batch.

This section contains the following topics:

1.1 Primary Areas of Application (see page 14)
1.2 Reporting and Inquiry Facilities (see page 16)
1.3 Files Overview (see page 19)
1.4 Product Prerequisites (see page 23)

Chapter 1: OVERVIEW 13
1.1 Primary Areas of Application

1.1 Primary Areas of Application

The CA MICS DB2 Analyzer helps you manage DB2 in the
following areas:

o Capacity Planning - The DB2 Analyzer maintains a database

of historical DB2 usage and performance data that enables
you to develop system capacity projections based on actual
workload and service data. Service and workload
information are two of the three primary factors in a
capacity planning effort. Data from the CA MICS DB2
Analyzer, used in conjunction with the third primary
input, your own forecasts of changes and the growth of
database use and services, provides a foundation for
effective database capacity planning.

o Performance Management - The DB2 Analyzer allows you to

examine and analyze specific DB2 workloads to identify
system and user problems. Subsequent problem correction,
as well as the ability to monitor user and DB2 plan
resource consumption, can result in significant
improvement in system performance.

o Service Levels - The DB2 Analyzer allows you to analyze

and report the level of service provided by your site's
database management facilities. This information can be
significant in establishing and maintaining realistic
service level goals and agreements. The DB2 Analyzer can
combine transactions into site-specific groupings (for
example, accounts payable) to provide consolidated
reporting on SLA achievement. Data from the DB2 Analyzer
can be valuable for assessing service degradation
resulting from insufficient system capacity and accounting
for the corresponding effect on end-user productivity.

o Management and Analytical Reporting - You can group and

summarize information directly from the database to create
useful management and analytical reporting measures.
Concise, one-page summaries are also available that
display key DB2 system trends as well as statistics
describing CPU utilization, storage management, log
management, and database activity. In addition to these
standard reports, you can easily create custom reports and
resummarize data when the summarized data in the database
does not your address specific reporting needs.

o Standards Enforcement and Security - The DB2 Analyzer

enables you to identify interactive plans that require
extremely long execution times and to report which DB2

14 Analyzer Option for DB2 Guide

1.1 Primary Areas of Application

plans are being utilized by specific users. You can use

this information to establish and enforce essential
security and standards programs within the DB2
environment.

o Audit Reporting - The DB2 Analyzer allows you to monitor

activity within DB2 indicating the type of activity being
attempted and the authorization of the DB2 user requesting
the action.

o Availability and Reliability - The DB2 Analyzer helps you

report on availability by monitoring DB2 downtime. At a
more detailed level, you can use plan termination
information to measure database system reliability.

o Accounting and Chargeback - The Analyzer's user and plan

activity files contain data that you can use for billing
DB2 system resource use. The data includes CPU time, I/O
counts, and DB2 statement counts by type (for example,
create table, insert, and update). A standard interface
to CA MICS Accounting and Chargeback permits accounting
from SMF measures of DB2 activity. In addition, you can
allocate the costs of database hardware, software, and
personnel directly to users based on the resources
consumed, which can be important both as a part of
day-to-day information services billing and as an aid in
assessing the fiscal impact and economic feasibility of
new or existing applications.

Chapter 1: OVERVIEW 15
1.2 Reporting and Inquiry Facilities

1.2 Reporting and Inquiry Facilities

The DB2 Analyzer's standard reports and online inquiries
provide concise, comprehensive information to help you manage
the DB2 environment. CA MICS provides interactive
capabilities that allow fast response to complex requests.
These capabilities are provided by:

o The CA MICS Information Center Facility (MICF) - MICF is a

panel-oriented productivity tool that allows you to access
information in the CA MICS Data Base. When you define
input, selection criteria, and report options, MICF
dynamically builds an inquiry program that executes in
either interactive or batch mode. Then, depending on your
specific requirements, MICF either prints the inquiry
report, displays the results at your terminal, or catalogs
the results for later viewing.

o The standard SAS language interface - The CA MICS

Workstation Facility (MWF) provides an online environment
that supports the standard SAS language interface in both
interactive and batch modes. SAS allows easy data
manipulation and statistical analysis and provides coding
facilities for programmers who are conducting extensive
analysis efforts or designing new reports for I/S business
applications. Because you can use the SAS System across
different types of machines (mainframes, micros, and
minis), it provides tremendous flexibility throughout the
organization. CA MICS uses the SAS System as a data
manager and as an advanced analysis language.

The DB2 Analyzer provides management and exception reports

that you can either use as delivered or tailor to your
specific requirements. In addition, you may use the MICF and
standard SAS language interface to create ad hoc reports.

Each type of report is discussed in detail in the following

subsections.

1 - Management Control Reports

2 - Exception Analyzer Reports

16 Analyzer Option for DB2 Guide

1.2 Reporting and Inquiry Facilities

1.2.1 Management Control Reports

The management control reports that are distributed with the
DB2 Analyzer summarize the activities of the I/S organization
by providing status and trend information or a comparison of
planned versus actual results. In addition, these reports
can help you to track DB2 performance and service, and to
estimate future resource requirements. The control reports
are produced during daily, weekly, or monthly CA MICS
processing and can be activated or deactivated for any given
time-span (DAILY, WEEKLY, or MONTHLY).

The following management control reports are delivered with

the DB2 Analyzer.

-------------------------------------------------------------
Report Function
-------------------------------------------------------------

System Services Provides an extract of the most

pertinent information from the DB2
System Activity File (created from the
SMF type 100 subtype 0 record) and
details the activity of each active DB2
subsystem.

Data Base Services Provides an extract of the most

pertinent information from the DB2 Data
Base Activity File (created from the SMF
type 100 subtype 1 record) and details
the data base activity of each active
DB2 subsystem.

Accounting Provides an extract of the most

pertinent information from the DB2 User
Activity File (created from the SMF type
101 record) and details the activity of
active DB2 users.

Performance Provides an extract of the most

pertinent information from the DB2 PLAN
Activity File (created from the SMF type
101 record) and details the activity of
active DB2 PLANS.

Calendar Provides an extract of key DB2 activity

indicators from the DB2 System Activity
and User Activity Files and presents
this information in calendar form,

Chapter 1: OVERVIEW 17
1.2 Reporting and Inquiry Facilities

showing the activity indicators for each

day of the month.

1.2.2 Exception Analyzer Reports

The CA MICS Platform provides an Exception Analyzer that
works with CA MICS data integration applications to provide
consolidated reporting of exception conditions across systems
and data sources. An "exception" is any condition that
deviates from the expected norm or any missed objective in
system performance or service.

CA MICS data integration applications detect exceptions by

testing daily data against user-defined thresholds. Each
application has an exception value analyzer to help determine
those thresholds. Each detected exception is assigned a
severity level and is associated with a management area.

The DB2 Analyzer is delivered with several exceptions tests,

and you can easily add your own tests (refer to Section 2.4
in the CA MICS Standard Reports Guide).

The exception reports produce increasing levels of detail to

address the needs of different audiences and, when combined
with exceptions from other CA MICS applications, make up a
powerful diagnostic tool for your organization. The
Exception Analyzer reports delivered with CA MICS are
described in Section 2.2 of the CA MICS Standard Reports
Guide.

18 Analyzer Option for DB2 Guide

1.3 Files Overview

The DB2 Analyzer builds the DB2 information area from DB2 SMF
type 100 and 101 records. Once created, the DB2 information
area maintains system and user measurement data on service,
availability, load, and user activity within the DB2
environment.

The following files are contained in the DB2 information area

of the CA MICS Data Base:

o DB2 System Activity File (DB2DSY)

The DB2 System Activity File maintains DB2 system activity

data, which includes information about address space,
instrumentation, subsystem services, commands, latch
manager, agent services, storage manager, trace data, and
log manager data. It is derived from the SMF record type
100 subtype 0.

o DB2 System DDF Activity File (DB2DDY)

The DB2 System DDF Activity File maintains DB2 system

distributed database (DDF) activity data for each DB2
subsystem participating in distributed processing. This
file contains DB2 network information such as bytes, rows,
and SQL statements transmitted as well as the number of
network conversations initiated. It is derived from the
SMF record type 100 subtype 0 when DDF is active.

o DB2 Database Activity File (DB2DSD)

The DB2 Database Activity File maintains DB2 database

activity data--SQL statements, buffer manager, binds, and
lock usage data. It is derived from the SMF record type
100 subtype 1.

o DB2 Buffer Pool Activity File (DB2DSD)

The DB2 Buffer Pool Activity File maintains DB2 activity

data for the buffer manager. It is derived from the SMF
record type 100 subtype 1.

o DB2 User Activity File (DB2DSU)

The DB2 User Activity File maintains DB2 accounting

data--product, user, buffer manager instrumentation, SQL
statements, and lock usage data by user. It is derived
from the SMF record type 101.

Chapter 1: OVERVIEW 19
1.3 Files Overview

o DB2 User DDF Activity File (DB2DDU)

The DB2 User DDF Activity File maintains DB2 accounting

data for distributed database activity (DDF) for each DB2
user. This file contains DB2 network information such as
bytes, rows, and SQL statements transmitted and the
number of network conversations initiated for each user.
It is derived from the SMF record type 101 when DDF is
active.

o DB2 Plan Activity File (DB2DSP)

The DB2 Plan Activity File maintains the same accounting

data as the DB2DSU file but organizes it by DB2 plan
(application). It is derived from rename operations
performed against the DB2DSU WORK file.

o DB2 Package/DBRM Activity File (DB2DPP)

The DB2 Package/DBRM Activity File provides resource

consumption and activity information for packages and data
base request modules. It is derived from the SMF type 101
record.

o DB2 Plan DDF Activity File (DB2DDP)

The DB2 Plan DDF Activity File maintains the same

accounting data as the DB2DDU file but organizes it by DB2
plan (application). It is derived from rename operations
performed against the DB2DDU WORK file.

o DB2 User Buffer Pool Activity File (DBPDBU)

The DB2 User Buffer Pool Activity File maintains DB2

buffer manager instrumentation usage data by user. It
is derived from the SMF record type 101.

o DB2 Plan Buffer Pool Activity File (DBPDBP)

The DB2 Plan Buffer Pool Activity File maintains the

same accounting data as the DBPDBU file but organizes it
by DB2 plan (application). It is derived from rename
operations performed against the DBPDBU WORK file.

o DB2 System Activity Suspend File (DB2_DS)

The DB2 System Activity Suspend File maintains the last

raw interval systems services record processed by CA MICS.

20 Analyzer Option for DB2 Guide

1.3 Files Overview

This record is needed for the calculation of interval

statistics in cases where DB2 executes continuously
across more than one CA MICS daily update cycle.

o DB2 System DDF Activity Suspend File (DB2_SH)

The DB2 System DDF Activity Suspend File maintains the

distributed data portion of the last raw interval systems
services record processed by CA MICS. This record is
needed for the calculation of interval statistics in cases
where DB2 executes continuously across more than one
CA MICS daily update cycle.

o DB2 Database Activity Suspend File (DB2_DD)

The DB2 Database Activity Suspend File maintains the last

raw interval data base services record processed by
CA MICS. This record is needed for the calculation of
interval statistics in cases where DB2 executes
continuously across more than one CA MICS daily update
cycle.

o DB2 Buffer Pool Activity Suspend File (DB2_DB)

The DB2 Buffer Pool Activity Suspend File maintains the

last raw interval buffer pool services record processed by
CA MICS. This record is needed for the calculation of
interval statistics in cases where DB2 executes
continuously across more than one CA MICS daily update
cycle.
Figure 1-2 illustrates the DB2 information area data sources
and files.

Chapter 1: OVERVIEW 21
1.3 Files Overview

+-------------------+ +--------------------+ +------------------+

Figure 1-2. DB2 Information Area Structure

22 Analyzer Option for DB2 Guide

1.4 Product Prerequisites

The DB2 Analyzer runs in a CA MICS environment that operates
under z/OS.

You must have IBM's DB2 program product active at your data
center, collecting the following records:

o Statistics (SMF type 100) Class 1 trace

o Accounting (SMF type 101) Class 1 trace and optionally:

Class 2 for more accurate chargeback

Class 3 for suspension event reporting
Class 5 for IFI requests timers
Class 7 for package/DBRM "in DB2" timers
Class 8 for package/DBRM "in DB2" wait times
Class 10 for optional package/DBRM "in DB2" detail data

Chapter 1: OVERVIEW 23
Chapter 2: USAGE GUIDELINES
The CA MICS DB2 Analyzer helps you

- establish service level goals and agreements

- account and charge for DB2 resources
- analyze trends, application system and program
performance, and DB2 data base contention
- tune the DB2 subsystem
- create and modify DB2 application programs and DB2 Plans

The following sections describe methods for using CA MICS DB2

data and the interfaces between the CA MICS DB2 Analyzer and
other CA MICS products.

This section contains the following topics:

2.1 Data Analysis (see page 26)
2.2 CA MICS Product Interfaces (see page 30)

Chapter 2: USAGE GUIDELINES 25

2.1 Data Analysis

The CA MICS Analyzer Option for DB2 helps you do the
following:

o Establish service level goals and agreements.

o Account and charge for DB2 resources.
o Analyze trends, application system and program
performance, and DB2 database contention.
o Tune the DB2 subsystem.
o Create and modify DB2 application programs and DB2 plans.

These functions are described on the following pages.

Service Level Goals and Agreements

In establishing service level goals and agreements, use the

following DB2 Analyzer data:

Resource Accounting and Chargeback

The DB2 Analyzer helps you recover the cost of DB2 resources
by providing input data to CA MICS Accounting and Chargeback,
discussed in Section 2.2.1, or to user-developed accounting
systems.

DB2 Analyzer accounting data is available from the following

sources:

o SMF type 100 statistics records

- Class 1 data includes system and database statistics, and

is useful for regularly monitoring system-wide DB2
activity.

o SMF type 101 accounting records

26 Analyzer Option for DB2 Guide

2.1 Data Analysis

- Class 1 data includes TCB attach and detach time, and is

useful for tracking events from create thread through
terminate.

- Class 2 data is "in DB2" time, a subset of class 1 data,

and is useful for tracking work being done within DB2
address spaces.

- Class 3 data contains information about suspensions

within DB2, such as I/O or lock/latch suspensions, and is
not useful for chargeback.

Use DB2CONN (Connection Identifier) to identify the

environment from which the data originates. Then use the
chart below (Figure 2-1. Accounting for DB2 Activity) to
decide what data to use to recover your DB2 processing costs.

Chapter 2: USAGE GUIDELINES 27

2.1 Data Analysis

| | | |
+------------------+------------------+---------------------+
| IMS | TCB CPU time | use CA MICS Analyzer|
| | | Option for IMS |
| | | |
| | I/O | DB2 GETPAGE requests|
| | | (DSUSGPGR) |
| | | |
+------------------+------------------+---------------------+
| TSO | TCB CPU time |use CA MICS Batch and|
| | | Operations Analyzer |
| | | |
| | I/O | DB2 GETPAGE requests|
| | | (DSUSGPGR) |
+-----------------------------------------------------------+

Figure 2-1. Accounting for DB2 Activity

Keep the following in mind when using resource accounting and

chargeback:

o Attempt to recover only TCB (task control block) CPU time

because SRB (service request block) time includes time for
SRBs run in the user's address space. User processing,
unrelated to DB2 processing, is included in SRB time.
(This only applies to data centers running DB2 versions
older than V6R1M0, because, starting with DB2 Version 6,
Release 1, IBM no longer records SRB time related fields in
the SMF Type 101 records.)

o DB2 does not provide a true measurement for disk I/O; it

provides counts of I/O from buffer pools. If your site
makes user modifications to support buffer pools 4 through
59, you should add those elements' values to your recovery
algorithm. Use the DB2 Analyzer's DSUSGPGR (summarized
buffer pool) element.

o In a distributed database environment, you must always add

the CPU information from the remote (serving) DB2 subsystem
to the calling environment's accounting information.

For example, if an IMS transaction accesses DB2-A, which in

turn accesses DB2-B, the CPU times for DB2-B are not
included in the IMS transaction's CPU times. For a complete
accounting picture, whenever DB2THDTY has a value of 1, you
must add the accounting information at the remote DB2
subsystem to that of the calling environment. In other
words, the SMF data from all DB2 subsystems needs to be
input to the same DB2 Analyzer database unit. Although this

28 Analyzer Option for DB2 Guide

2.1 Data Analysis

does not represent a change for the CICS accounting

strategy, it does imply a significant change for IMS, TSO,
and BATCH applications.

Trend Analysis and Standards Enforcement

To identify trends and enforce standards, compare

measurements taken in the current month with similar
measurements for the previous month.

Application Program and System Analyses

To analyze the performance of frequently used application

programs and their impact on the total workload, follow these
steps:

1. Identify the most frequently used application programs

using the Plan Performance and Plan Performance Summary
reports described in chapter 3 of this guide.

2. Analyze overall data center workload, looking for

programs that use more than their share of resources.

3. Review the components of each program's run time using

the Plan Performance reports and data from the CA MICS
Batch and Operations and the CA MICS Analyzer Option for
CICS, and look for ways to streamline the most
resource-intensive tasks.

Chapter 2: USAGE GUIDELINES 29

2.2 CA MICS Product Interfaces

DB2 Database Contention Analysis

To identify programs that experience resource contention

events such as deadlock, timeout, and DB2 resource manager
locking, use the Database Services and Plan Performance
reports described in chapter 3 of this guide.

You can use this information to help define new or existing

DB2 structures, select DB2 resource allocation strategies,
and identify problem SQL statements.

DB2 Subsystem Tuning

To optimize system storage and network workloads, monitor

vital subsystem parameters including thread queuing activity,
DB2 buffer pool activity, EDM pool usage, database activity,
and network activity attributable to distributed
conversations.

The DB2 System DDF Activity (DB2DDY), DB2 User DDF Activity
(DB2DDU), and DB2 Plan DDF Activity (DB2DDP) files provide
information about distributed database activity.

Application Program and DB2 Plan Development

When creating and modifying application programs and DB2

plans, use the DB2 Analyzer's files to quantify the number of
plans executed for a development project, their buffer pool
usage, and database access activity using information from
the following files:

o DB2 Plan Activity (DB2DSP)

o DB2 Plan DDF Activity (DB2DDP)

2.2 CA MICS Product Interfaces

Data from the CA MICS DB2 Analyzer lends significant value to
the use of other CA MICS products. These uses are described
briefly in the following sections:

1 - Accounting and Chargeback Interface

2 - Capacity Planner Interface

30 Analyzer Option for DB2 Guide

2.2 CA MICS Product Interfaces

2.2.1 Accounting and Chargeback Interface

The CA MICS DB2 Analyzer provides data elements that CA MICS
Accounting and Chargeback can use to bill data center
resource consumers. When CA MICS Accounting and Chargeback
produces invoices for data center users, users of DB2
resources will be charged according to an algorithm that uses
the data available from the elements described later in this
section.

You should review the information in the following section if

you plan to implement an accounting and chargeback scheme for
recovering DB2 costs.

1 - CA MICS Accounting and Chargeback Elements

Chapter 2: USAGE GUIDELINES 31

2.2 CA MICS Product Interfaces

2.2.1.1 CA MICS Accounting and Chargeback Elements

The following data elements are available for CA MICS

Accounting and Chargeback processing.

The list below describes the standard CA MICS Data Base and
external file elements that are available for charging.
These standard elements are distributed with CA MICS
Accounting and Chargeback. However, the system can use any
set of elements from the CA MICS Data Base, and you can add
elements for your user-developed applications and external
files.

Note: The asterisk (*) symbol preceding an element indicates

a highly recommended charging element that is NOT part
of the standard CA MICS Accounting and Chargeback
interface as distributed. These elements should be
given careful consideration because they are very
useful indicators of resource utilization. Accounting
class 2 elements are preferred over accounting class 1
elements because they represent IN-DB2 resource
consumption.

DB2 ACCOUNTING

DB2 Resource Accounting

DB2 CPU Charges

DB2 Instructions Executed
DB2 TCB CPU Time Consumed (Accounting Class 1)
*DB2 TCB CPU Time Consumed (Accounting Class 2)
DB2 CPU Time Consumed

DB2 Time
DB2 Elapsed Time (Accounting Class 1)
*DB2 Elapsed Time (Accounting Class 2)

DB2 Input/Output Charges

*DB2 Getpages
DB2 Synchronous Read IOs
DB2 I/O Elapsed Time

DB2 Logical I/O Charges

DB2 Insert Statements
DB2 Update Statements
DB2 Delete Statements
DB2 Describe Statements
DB2 Prepare Statements

32 Analyzer Option for DB2 Guide

2.2 CA MICS Product Interfaces

DB2 Open Statements

DB2 Close Statements
DB2 Create Table Statements
DB2 Create Index Statements
DB2 Create Tablespace Statements
DB2 Create Synonym Statements
DB2 Create Database Statements
DB2 Create Stogroup Statements
DB2 Create View Statements
DB2 Drop Index Statements
DB2 Drop Table Statements
DB2 Drop Tablespace Statements
DB2 Drop Database Statements
DB2 Drop Synonym Statements
DB2 Drop Stogroup Statements
DB2 Drop View Statements
DB2 Alter Stogroup Statements
DB2 Alter Tablespace Statements
DB2 Alter Table Statements
DB2 Alter Index Statements
DB2 Comment On Statements
DB2 Lock Table Statements
DB2 Grant Statements
DB2 Revoke Statements
DB2 Fetch Statements
DB2 Select Statements

2.2.2 Capacity Planner Interface

The CA MICS Capacity Planner can make extensive use of the
DB2 Analyzer for studies to establish job classifications,
analyze application performance trend, track the resource
requirements for individual applications, and implement
innumerable other analyses.

The CA MICS DB2 Analyzer provides a number of data elements

from the DB2 files to the CA MICS Capacity Planner. The
following section describes the data elements:

1 - Capacity Planning Elements

Chapter 2: USAGE GUIDELINES 33

2.2 CA MICS Product Interfaces

2.2.2.1 Capacity Planning Elements

The following data elements are available for capacity

planning analysis.

A. Data elements common to all CA MICS Capacity Planner

database files:

SYSID
ZONE or HOUR
YEAR
MONTH or WEEK
DATE

B. Data elements unique to the DB2 Planning Standard

Application database file:

1. Numeric format data elements

ALLBFEXP - Total Get Page Caused Buffer

Expansions
ALLGETPG - Total Get Page Requests
ALLPRFET - Total Prefetch Read Requests
ALLSYCIO - Total Synchronous Read I/Os
ALLWRKUP - Total Units of Work Updated
CPUOVRHD - Ratio of DB2 CPU Time to Attributable
DSDABBP0 - Active Buffers In Buffer Pool 0
DSDABBP1 - Active Buffers In Buffer Pool 1
DSDABBP2 - Active Buffers In Buffer Pool 2
DSDABBP3 - Active Buffers In Buffer Pool 3
DSDMNRPG - Min Free Pages in Free Chain
DSDMXCTU - Max Pages Used for Cursor Table
DSDMXDBD - Max Pages Used for DBD
DSDMXDSO - Max Data Sets Open Concurrently
DSDMXPGE - Max Pages in EDM Pool
DSDMXRPG - Max Free Pages in Free Chain
DSDMXSKC - Max Pages Used for SKCT Table
DSDPAGE - No. Pages in EDM Pool
DSDRFXS0 - Read Pagefixed W/O Real Storage BP0
DSDRFXS1 - Read Pagefixed W/O Real Storage BP1
DSDRFXS2 - Read Pagefixed W/O Real Storage BP2
DSDRFXS3 - Read Pagefixed W/O Real Storage BP3
DSDWFXS0 - Write Pagefixed W/O Real Storage BP0
DSDWFXS1 - Write Pagefixed W/O Real Storage BP1
DSDWFXS2 - Write Pagefixed W/O Real Storage BP2
DSDWFXS3 - Write Pagefixed W/O Real Storage BP3
DSULEEM - No. Lock Escalations to Exclusive Mode
DSULESM - No. Lock Escalations to Shared Mode
DSUMXPL - Max. No. Page Locks Held

34 Analyzer Option for DB2 Guide

2.2 CA MICS Product Interfaces

DSUSUSP - Suspend Count

DSUTIMO - Timeout Count
DSUWATTR - NO. Wait Trace Events Processed
TOTSTMTS - Total Statements Executed

2. Time format data elements

CPUINDB2 - Total Attributable DB2 TCB

DSUALLTM - Lock & Latch Time
DSUCPUTM - Accumulated CPU Time
DSUELPTM - Elapsed Time
DSUET2TM - Class 2 Accum. Elapsed Time in DB2
DSUIOETM - DB2 I/O Time
DSUTCBTM - TCB Time
DSUTC2TM - Class 2 Accumulated TCB Time in DB2
DSYSRTM0 - Accumulated SRB Time Addr0
DSYSRTM1 - Accumulated SRB Time Addr1
DSYSRTM2 - Accumulated SRB Time Addr2
DSYTCTM0 - Accumulated TCB Time Addr0
DSYTCTM1 - Accumulated TCB Time Addr1
DSYTCTM2 - Accumulated TCB Time Addr2
TOTCPSTM - Total DB2 System CPU Time
TOTTCSTM - Total DB2 System TCB Time
TOTSRSTM - Total DB2 System SRB Time

Chapter 2: USAGE GUIDELINES 35

Chapter 3: REPORTS
Standard data displays are provided with the DB2 Analyzer to
aid the user in the rapid and effective usage of the data the
Analyzer makes available.

The following section contains descriptions of the reports,

sample report formats, and instructions for producing them:

This section contains the following topics:

3.1 Tabular Reports Overview (see page 38)

Chapter 3: REPORTS 37
3.1 Tabular Reports Overview

3.1 Tabular Reports Overview

The standard tabular reports display the numeric values of
key data elements collected and recorded in the CA MICS Data
Base by the CA MICS DB2 Analyzer. Tabular reports can be
categorized as:

o Tracking Reports
o Analysis Reports

TRACKING REPORTS

Tracking reports present key data elements related to

service, workload, capacity, and performance. Tracking
reports are designed to indicate operating conditions or
symptoms of problems; they do not pinpoint causes. In
that respect they are overview reports despite their
extensive level of detail.

There are two types of tracking reports:

o Profiles
o Trends

Profiles present data as groups of individual summary values

(averages, minimums and maximums, etc.) over a given period
of time (day, week, month, etc.). Profile reports give a
snapshot of a specific area of operation and are employed
when a specific value of a measured element indicates a
desirable or undesirable condition. Thus, profiles are
generally used in conjunction with a set of threshold values
which may be either implicitly understood or explicitly
stated on the report.

Trends present data as a series of measured values displayed

together to show the nature of the change of a condition over
a period of time. Profiles, by the very nature of their
presentation, tend to show more measured values and fewer
data elements than profiles. Trends are used when rate of
change of a measure or the exact time at which a given
measured value was reached is more important than the actual
measure of the value itself.

ANALYSIS REPORTS

Analysis reports are designed to test hypotheses about the

causes of specific symptoms observed in some area of
operation. For instance, an analysis report might be
designed to test the hypothesis that poor TSO end-user

38 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

response time is caused by contention for the data path to

the TSO work packs. Thus, analysis reports tend to display
the relationships between the values of two or more data
elements, one or more of which is symptomatic and one or
more of which is causal.

The symptomatic element may be an arbitrary limit, such as a

response time objective; the specific time or period of time
when other symptomatic measures passed a threshold value,
such as the time when utilization exceeded the maximum
allowable; or it may be the actual measured value of a data
element, such as the value of the free buffer "high-water"
mark.

Because they are highly specific both to an area of operation

and a condition of operation, the formats of analysis reports
tend to vary greatly with their intended use. The key to
using an analysis report is the understanding of the usage
for which it was developed.

Descriptions of the reports, sample report formats, and

instructions on how to produce them are given in the
following sections:

1 - Producing Tabular Reports

2 - System Services Report
3 - Data Base Services Report
4 - Accounting Report
5 - Calendar Report
6 - Plan Performance Summary Report
7 - Plan Performance Report

Chapter 3: REPORTS 39
3.1 Tabular Reports Overview

3.1.1 Producing Tabular Reports

Certain parameters allow the user to specify whether CA MICS
should run some, all, or none of the reporting modules of the
installed system. These parameters are specified by changing
prefix.MICS.PARMS(EXECDEF). The parameters may be altered at
any time without regenerating the CA MICS system.

The standard report options control the execution of the

Daily, Weekly, and Monthly Analysis Reports. For the Daily
reports these options are:

REPORT MBODAILY ALL - Produce the Daily Analysis

Reports for all installed
analyzers.

REPORT MBODAILY NONE - Do not produce any Daily Analysis

Reports.

REPORT MBODAILY list - Produce the Daily Analysis

Reports for the analyzers listed
(SMF, RMF, DB2, etc.)

The options for Weekly and Monthly Analysis Reports are

identical:

REPORT MBOWEEKLY ALL/NONE/list

REPORT MBOMONTHLY ALL/NONE/list

No facilities are provided to modify the report frequency or

contents through modifications to operational JCL.

In addition to setting the time-span level options in EXECDEF

you can also specify report level options in the member
#DB2MOBJ of library prefix.MICS.USER.SOURCE. Default values
for these options are in member #DB2MOBJ of library
sharedprefix.MICS.SOURCE. With the macro variables contained
in this member you can activate or deactivate each standard
report within a given time-span. To activate a report, set
its corresponding macro variable to the value Y.

The variables available and their associated standard reports

are as follows:

SYSREP - System Services reporting

DDYREP - DDF reporting for the System Services report
DBMREP - Data Base Services reporting

40 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

USRAREP - DB2 accounting level reporting

DDUREP - DDF reporting for the DB2 accounting reports
PLANREP - Plan Performance reporting
DDPREP - DDF reporting for the Plan performance reports
PLANSUM - Plan Summary reporting
CALREP - CA MICS DB2 Calendar reporting

Chapter 3: REPORTS 41
3.1 Tabular Reports Overview

3.1.2 DB2 System Services Report

The DB2 System Services Report provides an extract of the
most pertinent information from the DB2 System Activity File
(DB2DSY) which is created from the SMF type 100 subtype 0
record. It details the system activity of each active DB2
subsystem.

The DB2 System Services Report is normally produced as a part

of the DAILYRPT and MONTHRPT jobs, which are automatically
submitted during the DAILY and MONTHLY runs, respectively.

DAILYRPT executes the SAS program found in

sharedprefix.MICS.SOURCE(DYDB2MBO), while MONTHRPT executes
sharedprefix.MICS.SOURCE(MNDB2MBO). Both of these programs
prepare data and then execute the actual report generation
program located in sharedprefix.MICS.SOURCE(DB2SYSPT).

To activate this report for use in DYDB2MBO or MNDB2MBO, you

must set the macro variable SYSREP=Y in the #DB2MOBJ member
of your unit library prefix.MICS.USER.SOURCE. The system
default report macro variable values are in
sharedprefix.MICS.SOURCE member #DB2MOBJ.

To create this report directly, ensure the macro variable

SYSREP is set equal to Y in member #DB2MOBJ of your unit
library prefix.MICS.USER.SOURCE. If you require the DDF
reporting block for this report, you must also set the macro
variable DDYREP=Y. Set all other macro variables to N to
produce ONLY the System Services report. Finally, you must
execute the program DYDB2MBO or MNDB2MBO as is done in the
DAILYRPT and MONTHRPT jobs.

42 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

CA
PAGE: 1
CA MICS/DB2 DB2 SYSTEM SERVICES REPORT SUBPAGE: 1
RUN DATE: Friday, December 2, yyyy
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A !
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================
! !
CPU TIME ! THREAD SUMMARY ! IFC CHECKPOINT DATA
! !
TCB ! THREADS 20,451 ! CHECKPOINTS 1
SYSTEM SERVICES 0:00:25.7 ! !
DATA BASE SERVICES 0:00:42.8 ! !
IMS RESOURCE LOCK MANAGER 0:00:00.0 ! !
DDF SERVICES 0:00:02.3 ! !
! !
---------------------------------------------------------------------------------------------------------------------------------

SUBSYSTEM SERVICES

CONNECT 621 COMMIT 4 SSI CALLS 629 EXIT 494

CREATE THREAD 20,451 ABORT 19,382 RESOLVE 0 END OF TASK 8
SIGNON 0 INDOUBT THREADS 0 SYNCHRONIZE 8,897 END OF MEMORY 0
TERMINATE 21,072 PREPARE TO COMMIT 0 THREADS WAITED 0

---------------------------------------------------------------------------------------------------------------------------------
!
AGENT SERVICES ! STORAGE MANAGER
!
ALLOCATION FAILURES ! SHORT ON STORAGE
UNAVAILABLE RESOURCE 0 ! DETECTED 0
DEADLOCK 0 ! CONTRACTION 0
INVALID RESOURCE 0 ! ABEND 0
!
PHYSICAL SUSPENDS 611,941 ! GETMAIN/FREEMAIN ERRORS 0
!
---------------------------------------------------------------------------------------------------------------------------------

LOG MANAGER

LOG WRITE REQUESTS CONTROL INTERVALS LOG READ REQUESTS ARCHIVE LOG

WRITE ACTIVE 46,153 CREATED 50,494 SATISFIED FROM ALLOCATIONS

WAIT 0 OFFLOADED 297,000 OUTPUT BUFFER 166 READ 0
NO WAIT 278,821 ACTIVE LOG 0 WRITE 1
FORCE 13,770 ARCHIVE LOG 0 READS DELAY 0
BUFFER WAITS 0
---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, September 3, yyyy 6:02:23 TO Friday, September 3, yyyy 17:53:23
---------------------------------------------------------------------------------------------------------------------------------
CA
PAGE: 2
CA MICS/DB2 DB2 SYSTEM SERVICES REPORT SUBPAGE: 2
RUN DATE: Friday, December 2, yyyy
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A !
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================

COMMAND DATA

DISPLAY START STOP MISCELLANEOUS

DATABASE 0 DB2 0 DB2 0 RECOVER BSDS 0

THREAD 4 DATABASE 0 DATABASE 0 RECOVER INDOUBT 0
UTILITY 0 TRACE 0 TRACE 0 TERM UTILITY 4
RLIMIT 0 RLIMIT 0 RLIMIT 0 MODIFY TRACE 0
LOCATION 0 DDF 0 DDF 0 CANCEL DDF THREAD 0
ARCHIVE LOG 0
---------------------------------------------------------------------------------------------------------------------------------

Chapter 3: REPORTS 43
3.1 Tabular Reports Overview

IFC DESTINATION DATA

DESTINATION RECORDS ACCEPTED BUFFER ERRORS NOT ACCEPTED NOT ACTIVE WRITER FAILURE

SMF 82,158 0 0 0 0
RES 0 0 0 0 0
GTF 0 0 0 0 0
OP1 97,816 0 0 0 0
OP2 0 0 0 0 0
OP3 0 0 0 0 0
OP4 0 0 0 0 0
OP5 0 0 0 0 0
OP6 0 0 0 0 0
OP7 0 0 0 0 0
OP8 0 0 0 0 0
---------------------------------------------------------------------------------------------------------------------------------
LATCH MANAGER ! IFI COUNTERS
!
TEST SHARED/EXCLUSIVE 0 LOG BSDS ACCESS 297 ! ABENDS 0
SERVICE TASK CONTROLLER 0 BUFFER MANAGER EXCLUSIVE 2 117 ! UNRECOGNIZED FUNCTIONS 0
SSSC ALLIED AGENT QUEUE 9 DATA MANAGER HASH TABLES 3 ! COMMAND REQUESTS 7
SUBSYSTEM INTERFACE 1 DATA MANAGER 0 ! READA REQUEST 60,019
DATABASE ALLOCATION CONTROL 5 ADDRESS SPACE ACTIVE 1 ! READS REQUESTS 47
BUFFER MANAGER SHARED 0 SERVICE QUEUE 0 ! WRITE REQUESTS 0
BUFFER MANAGER EXCLUSIVE 192 SYSTEM ADDRESS SPACE 0 !
RECOVERY MANAGER STATUS 0 TRACE TABLE 2 !
SYNONYM CHAIN 1 0 STORAGE MGR VECTOR TABLE 8,393 !
SYNONYM CHAIN 2 0 STORAGE MGR HEADER BLOCK 2,568 !
LOG WRITE FUNCTION 41 !
!
---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, September 3, yyyy 6:02:23 TO Friday, September 3, yyyy 17:53:23
---------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 3
CA MICS/DB2 DB2 SYSTEM SERVICES REPORT SUBPAGE: 3
RUN DATE: Friday, December 2, yyyy
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A !
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================

DDF SERVICES STATISTICS

----------------------------------------------------------------------------------------------------------------
REMOTE ! ! ! TYPE TRANS ! ! CONVERS.! ! SQL ! DATA ! BYTES/1000
LOCATION(S) ! TYPE ! TRANS. ! ABORTS ! COMMITS! CONVERS. ! QUEUED ! MESSAGES !STATEMENTS! ROWS ! TRANSMITTED
---------------------------------------------------------------------------------------------------------------------------------
DRDA REMOTE LOCS !SENT TO:! 0 0 0 0 0 54,933 0 732 33,648
! AVG ! 0 0.0 0.0 1.0 0.0 54,933.0 0.0 732 33,648
(STAT.RECORDS) ! MAX ! 0 0 0 0 0 2,520 0 672 3,339
71 !RECVD FR! 185 5 6,329 185 ------ 54,944 122,247 0 34,244
! AVG ! 1 0.0 34.2 1.0 ------ 297.0 660.8 0 185
! MAX ! 21 2 645 21 ------ 2,531 6,742 0 2,019
! !
+--------------------------------------------------------------------------------------------------------------

@ - INDICATES REPORTED BYTE COUNT IS NOT DIVIDED BY 1000

NOTE: * DDF AVERAGES ARE BASED ON TRANSACTIONS SENT/RECEIVED
NOTE: * DDF MAXIMUMS ARE BASED ON DDF STATISTICS RECORD COUNT
---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, September 3, yyyy 6:02:23 TO Friday, September 3, yyyy 17:53:23
---------------------------------------------------------------------------------------------------------------------------------

Figure 3-1. DB2 System Services Report Sample

44 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

3.1.2.1 DB2 System Services Report Format

The DB2 System Services Report contains the following

sections:

o Identification
o CPU Time
o Thread Summary
o IFC Checkpoint Data
o Subsystem Services
o Agent Services (only when OPTION SERV is specified in
sharedprefix.MICS.GENLIB(DB2GENIN))
o Storage Manager (only when OPTION SERV is specified in
sharedprefix.MICS.GENLIB(DB2GENIN))
o Log Manager
o Command Data
o IFC Destination Data
o Latch Manager (only when OPTION SERV is specified in
sharedprefix.MICS.GENLIB(DB2GENIN))
o IFI Counters
o DDF Services Statistics

Identification Section

RUN DATE Date the report was created.

REPORTING PERIOD Earliest and latest dates and

times found within the data.

SYSID Logical system identifier.

DB2 SYSTEM DB2 subsystem identifier.

DB2 RELEASE DB2 subsystem release identifier.

(DB2RELN)

CPU Time Section

SYSTEM SERVICES Accumulated TCB time for the

TCB system address space. (DSYTCTM0)

SYSTEM SERVICES Accumulated SRB time for the

SRB system address space. (DSYSRTM0)

DATABASE SERVICES Accumulated TCB time for the

TCB database address space. (DSYTCTM1)

DATABASE SERVICES Accumulated SRB time for the

Chapter 3: REPORTS 45
3.1 Tabular Reports Overview

SRB database address space. (DSYSRTM1)

IMS RESOURCE LOCK Accumulated TCB time for the IMS

MANAGER TCB Resource Lock Manager address
space. (DSYTCTM2)

IMS RESOURCE LOCK Accumulated SRB time for the IMS

MANAGER SRB Resource Lock Manager address
space. (DSYSRTM2)

DDF SERVICES Accumulated TCB time for the DB2

TCB DDF address space. (DSYTCTM3)

DDF SERVICES Accumulated SRB time for the DB2

SRB DDF address space. (DSYSRTM3)

Thread Summary Section

THREADS Number of threads created.

IFC Checkpoint Data Section

CHECKPOINT Number of checkpoints taken.

Subsystem Services Section

CONNECT Successful connects to DB2 by

TSO, IMS, CICS, or DB2 utility.

CREATE THREAD Number of threads created.

SIGNON Number of times the user

authorization was updated.

TERMINATE Number of times a thread, signon,

or identify was terminated.
Because a signon can be performed
without a terminate, this does
not give an exact count of how
many threads were terminated.

COMMIT Number of successful requests for

commit phase 2.

ABORT Number of times that a unit of

46 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

recovery was backed out.

Possible reasons are an
application program ABEND,
application program roll back
request, application program
deadlocked on database records,
thread ABEND caused by resource
shortage, or application program
canceled by operator.

INDOUBT THREADS Number of application failures

that occurred after a successful
prepare but before a successful
commit. The failure can occur in
the address space of the
application, the transaction
manager, or DB2.

PREPARE TO COMMIT Number of successful requests for

commit phase 1.

SSI CALLS Number of SSI calls. These

include EOT, EOM, subsystem
identify, commands from the
system console, and HELP
requests.

RESOLVE Number of requests to process

indoubt work that was successful.

SYNCHRONIZE Number of synchronized commit

requests. TSO applications use
this facility.

THREADS WAITED Number of create-thread requests

that waited.

EXIT Number of successful DSN3EXIT

functions performed. This
facility is used to establish or
remove an exit.

END OF TASK Number of non-DB2 tasks that

abended while connected to DB2.

END OF MEMORY Number of non-DB2 address spaces

deleted by the operating system
while connected to DB2.

Chapter 3: REPORTS 47
3.1 Tabular Reports Overview

Agent Services Section (only shown if OPTION SERV is

specified in sharedprefix.MICS.GENLIB(DB2GENIN))

UNAVAILABLE RESOURCE Number of plans that have become

unavailable. For example, the
plan has become invalidated and
an unsuccessful automatic bind
has occurred.

DEADLOCK Number of allocation deadlocks.

These occur when resources are
limited and contention is high.

INVALID RESOURCE Number of requests for a plan

that was unknown to DB2.

PHYSICAL SUSPENDS Number of suspends (waits) that

occur due to latch contention,
lock contention, I/O, and
execution unit switching.

Storage Manager Section (only shown if OPTION SERV is

specified in sharedprefix.MICS.GENLIB(DB2GENIN))

DETECTED Number of short-on-storage

situations detected.

CONTRACTION Number of storage contractions

due to a shortage of storage.

ABEND Number of ABENDs issued due to a

shortage of storage.

GETMAIN/FREEMAIN Number of non-zero returns from

ERRORS GETMAIN and FREEMAIN.

Log Manager Section

WRITE ACTIVE Number of calls to write active

log buffers.

WAIT Number of log write requests,

WAIT.

NO WAIT Number of log write requests,

NOWAIT.

48 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

FORCE Number of log write requests,

FORCE.

BUFFER WAITS Number of waits because of an

unavailable write buffer.

CREATED Number of active log-output

control intervals created.

OFFLOADED Number of control intervals

offloaded.

OUTPUT BUFFER Number of reads satisfied from

output buffers.

ACTIVE LOG Number of reads satisfied from

active log data set.

ARCHIVE LOG Number of reads satisfied from

archive log data set.

READ Number of archive log-read

allocations.

WRITE Number of archive log-write

allocations.

READS DELAY Number of reads delayed because

archive allocation limit reached.

Command Data Section

DISPLAY DATABASE Number of DISPLAY DATABASE

commands.

DISPLAY THREAD Number of DISPLAY THREAD

commands.

DISPLAY UTILITY Number of DISPLAY UTILITY

commands.

DISPLAY RLIMIT Number of DISPLAY RLIMIT

commands.

DISPLAY LOCATION Number of DISPLAY LOCATION

commands.
Note: This will appear on the

Chapter 3: REPORTS 49
3.1 Tabular Reports Overview

report only if DDF data is

present.

START DB2 Number of START DB2 commands.

START DATABASE Number of START DATABASE

commands.

START TRACE Number of START TRACE commands.

START RLIMIT Number of START RLIMIT commands.

START DDF Number of START DDF commands.

Note: This will appear on the
report only if DDF data is
present.

STOP DB2 Number of STOP DB2 commands.

STOP DATABASE Number of STOP DATABASE commands.

STOP TRACE Number of STOP TRACE commands.

STOP RLIMIT Number of STOP RLIMIT commands.

STOP DDF Number of STOP DDF commands.

Note: This will appear on the
report only if DDF data is
present.

RECOVER BSDS Number of RECOVER BSDS commands.

RECOVER INDOUBT Number of RECOVER INDOUBT

commands.

TERM UTILITY Number of TERM UTILITY commands.

MODIFY TRACE Number of MODIFY TRACE commands.

CANCEL DDF THREAD Number of CANCEL DDF THREAD.

commands
Note: This will appear on the
report only if DDF data is
present.

ARCHIVE LOG Number of ARCHIVE LOG commands.

50 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

IFC Destination Data Section

SMF RECORDS ACCEPTED SMF records successfully written.

SMF BUFFER ERRORS SMF buffer errors.

SMF NOT ACCEPTED SMF record-not-accepted errors.

SMF NOT ACTIVE SMF not-active errors.

SMF WRITER FAILURE SMF writer failures.

RES RECORDS ACCEPTED RES records successfully written.

RES BUFFER ERRORS RES buffer errors.

RES NOT ACCEPTED RES record-not-accepted errors.

RES NOT ACTIVE RES not-active errors.

RES WRITER FAILURE RES writer failures.

GTF RECORDS ACCEPTED GTF records successfully written.

GTF BUFFER ERRORS GTF buffer errors.

GTF NOT ACCEPTED GTF record-not-accepted errors.

GTF NOT ACTIVE GTF not-active errors.

GTF WRITER FAILURE GTF writer failures.

OP1 RECORDS ACCEPTED OP1 records successfully written.

OP1 BUFFER ERRORS OP1 buffer errors.

OP1 NOT ACCEPTED OP1 record-not-accepted errors.

OP1 NOT ACTIVE OP1 not-active errors.

OP1 WRITER FAILURE OP1 writer failures.

OP2 RECORDS ACCEPTED OP2 records successfully written.

OP2 BUFFER ERRORS OP2 buffer errors.

OP2 NOT ACCEPTED OP2 record-not-accepted errors.

OP2 NOT ACTIVE OP2 not-active errors.

Chapter 3: REPORTS 51
3.1 Tabular Reports Overview

OP2 WRITER FAILURE OP2 writer failures.

OP3 RECORDS ACCEPTED OP3 records successfully written.

OP3 BUFFER ERRORS OP3 buffer errors.

OP3 NOT ACCEPTED OP3 record-not-accepted errors.

OP3 NOT ACTIVE OP3 not-active errors.

OP3 WRITER FAILURE OP3 writer failures.

OP4 RECORDS ACCEPTED OP4 records successfully written.

OP4 BUFFER ERRORS OP4 buffer errors.

OP4 NOT ACCEPTED OP4 record-not-accepted errors.

OP4 NOT ACTIVE OP4 not-active errors.

OP4 WRITER FAILURE OP4 writer failures.

OP5 RECORDS ACCEPTED OP5 records successfully written.

OP5 BUFFER ERRORS OP5 buffer errors.

OP5 NOT ACCEPTED OP5 record-not-accepted errors.

OP5 NOT ACTIVE OP5 not-active errors.

OP5 WRITER FAILURE OP5 writer failures.

OP6 RECORDS ACCEPTED OP6 records successfully written.

OP6 BUFFER ERRORS OP6 buffer errors.

OP6 NOT ACCEPTED OP6 record-not-accepted errors.

OP6 NOT ACTIVE OP6 not-active errors.

OP6 WRITER FAILURE OP6 writer failures.

OP7 RECORDS ACCEPTED OP7 records successfully written.

OP7 BUFFER ERRORS OP7 buffer errors.

OP7 NOT ACCEPTED OP7 record-not-accepted errors.

52 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

OP7 NOT ACTIVE OP7 not-active errors.

OP7 WRITER FAILURE OP7 writer failures.

OP8 RECORDS ACCEPTED OP8 records successfully written.

OP8 BUFFER ERRORS OP8 buffer errors.

OP8 NOT ACCEPTED OP8 record-not-accepted errors.

OP8 NOT ACTIVE OP8 not-active errors.

OP8 WRITER FAILURE OP8 writer failures.

DDF Services Statistics

LOCATION Location identifier for a remote DB2

subsystem. (DB2RLOCN)

TYPE Type of statistic being reported.

(Total, Average, Maximum)

TRANS. Count of transactions sent or received.

Sent-(DDYTRANS) Received-(DDYTRANR)

ABORTS Abort messages sent or received.

Sent-(DDYABRS) Received-(DDYABRR)

COMMITS COMMIT messages sent or received.

Sent-(DDYCOMS) Received-(DDYCOMR)

CONVERS. VTAM conversations sent or received.

Sent-(DDYCNVS) Received-(DDYCNVR)

CONVERS. QUEUED VTAM conversations queued (DDYCNVQ)

to be sent to remote site.

MESSAGES VTAM messages sent or received.

Sent-(DDYMSGS) Received-(DDYMSGR)

SQL STATEMENTS SQL statements sent or received.

Sent-(DDYSQLS) Received-(DDYSQLR)

DATA ROWS Data rows sent or received.

Sent-(DDYROWS) Received-(DDYROWR)

BYTES/1000 Number of bytes sent (DDYROWS/1000)

TRANSMITTED or received (DDYROWR/1000).

Chapter 3: REPORTS 53
3.1 Tabular Reports Overview

Latch Manager Section (only shown if OPTION SERV is

specified in sharedprefix.MICS.GENLIB(DB2GENIN))

TEST SHARED/EXCLUSIVE (DSYTSELT) shared/exclusive latch

test

SERVICE TASK CONTROLLER (DSYSTCLT) services task

controller latch

SSSC ALLIED AGENT QUEUE (DSYAAQLT) allied agent queue

latch

SUBSYSTEM INTERFACE (DSYSSILT) subsystem interface

latch

DB ALLOCATION CONTROL (DSYDBALT) database allocation

latch

BUFFER MANAGER SHARED (DSYBMSLT) buffer manager latch -

shared

BUFFER MANAGER EXCLUSIVE (DSYBMELT) buffer manager latch -

exclusive

RECOVERY MANAGER STATUS (DSYRMSLT) recover manager status

latch

SYNONYM CHAIN 1 (DSYSCILT) synonym chain-1 latch

SYNONYM CHAIN 2 (DSYSC2LT) synonym chain-2 latch

LOG WRITE FUNCTION (DSYLGWLT) log write function

latch

LOG BSDS ACCESS (DSYBALT) log BSDS latch

BUFFER MGR EXCLUSIVE 2 (DSYBM2LT) buffer manager 2 latch

exclusive

DATA MANAGER HASH TABLES (DSYMHLT) data manager hash

tables latch

DATA MANAGER (DSYDMLT) data manager latch

ADDRESS SPACE ACTIVE (DSYASALT) address space active

latch

SERVICE QUEUE (DSYBMSLT) service queue latch

54 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

SYSTEM ADDRESS SPACE (DSYLAT29) system address space

latch

TRACE TABLE (DSYTTLT) trace table latch

STORAGE MGR VECTOR TABLE (DSYSMVLT) storage manager vector

table latch

STORAGE MGR HEADER BLOCK (DSYSMHLT) storage manager header

block latch

IFI Counters Section

ABENDS Count of instrumentation facility

ABENDs encountered.

UNRECOGNIZED FUNCTIONS Count of unrecognized

instrumentation facility
functions.

COMMAND REQUESTS Count of IFI command requests.

READA REQUESTS Count of IFI read A requests.

READS REQUESTS Count of IFI read S requests.

WRITE REQUESTS Count of IFI write requests.

Chapter 3: REPORTS 55
3.1 Tabular Reports Overview

3.1.3 DB2 Data Base Services Report

The DB2 Data Base Services Report provides an extract of the
most pertinent information from the DB2 Data Base Activity
File (DB2DSD) that is created from the SMF Type 100 Subtype 1
record. It details the data base activity of each active DB2
subsystem.

The DB2 Data Base Services Report is normally produced as a

part of the DAILYRPT and MONTHRPT jobs, which are
automatically submitted during the DAILY and MONTHLY runs,
respectively.

DAILYRPT executes the SAS program found in

To activate this report for use in DYDB2MBO or MNDB2MBO you

must set the macro variable DBMREP=Y in the #DB2MOBJ member
of your unit library prefix.MICS.USER.SOURCE. The system
default report macro variable values are in
sharedprefix.MICS.SOURCE member #DB2MOBJ.

To create this report directly, ensure the macro variable

DBMREP is set equal to Y in member #DB2MOBJ of your unit
library prefix.MICS.USER.SOURCE. Set all other macro
variables to N to produce ONLY the Data Base Services report.
Finally, you must execute the program DYDB2MBO or MNDB2MBO as
is done in the DAILYRPT and MONTHRPT jobs.

56 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

CA
PAGE: 1
CA MICS/DB2 DB2 DATA BASE SERVICES REPORT SUBPAGE: 1
RUN DATE: Monday, December 5, 2005
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A ! THREADS: 20,451
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================
SQL CALLS

MANIPULATIVE STATEMENTS CONTROL STATEMENTS DEFINITIONAL STATEMENTS

SELECT 2,203 LOCK TABLE 0 CREATE DROP ALTER

INSERT 3,948 GRANT 2
UPDATE 2,251 REVOKE 0 TABLE 0 0 0
DELETE 3,357 INCREMENTAL BIND 0 INDEX 0 0 0
DESCRIBE 14,500 COMMENT 0 TABLESPACE 0 0 0
PREPARE 31,404 SET SQLID 22,654 STOGROUP 0 0 0
OPEN 47,919 SET HOST VARIABLE 5 DATABASE 0 0 0
CLOSE 19,929 SYNONYM 0 0
FETCH 68,061 VIEW 0 0
LABEL 0 PACKAGE 0
DESCRIBE TABLE 0

---------------------------------------------------------------------------------------------------------------------------------
RESOURCE LIMIT FACILITY ! LOCKING
!
RESOURCE TABLE ID ! DEADLOCKS 0 LATCH SUSPEND COUNT 116
HOW LIMIT WAS DETERMINED UNKNOWN ! SUSPENSIONS 21 OTHER SUSPEND COUNT 12,291
SERVICE UNIT TIME LIMIT 0 ! TIMEOUTS 0 LOCK REQUEST COUNT 808,542
CPU TIME LIMIT 0:00:00.000 ! ESCALATED TO SHARED 0 QUERY REQUEST COUNT 0
HIGHEST CPU TIME USED 0:00:00.000 ! ESCALATED TO EXCLUSIVE 1 CHANGE REQUEST COUNT 181,345
! MAX. PAGE LOCKS HELD 0 OTHER IRLM REQUEST COUNT 0

---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, September 3, 2004 6:02:23 TO Friday, September 3, 2004 17:53:23
---------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 2
CA MICS/DB2 DB2 DATA BASE SERVICES REPORT SUBPAGE: 2
RUN DATE: Monday, December 5, 2005
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A ! THREADS: 20,451
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================
PLAN ACTIVITY

ALLOCATE BIND REBIND FREE

ATTEMPTS 20,587 ATTEMPTS 0 COMMANDS 0 COMMANDS 0

SUCCESS 20,587 SUCCESS 0 ATTEMPTS 0 ATTEMPTS 0
NON-EXISTENT 0 ADD 0 SUCCESS 0 SUCCESS 0
PLANS REPLACE 0
TEST 0
BOUND AND KEPT 0

---------------------------------------------------------------------------------------------------------------------------------
PACKAGE ACTIVITY

ALLOCATE BIND REBIND FREE

ATTEMPTS 27,796 ATTEMPTS 7 COMMANDS 0 COMMANDS 0

SUCCESS 22,303 SUCCESS 7 ATTEMPTS 0 ATTEMPTS 0
ADD 0 SUCCESS 0 SUCCESS 0
REPLACE 0
BOUND AND KEPT 0

Chapter 3: REPORTS 57
3.1 Tabular Reports Overview

---------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 3
CA MICS/DB2 DB2 DATA BASE SERVICES REPORT SUBPAGE: 3
RUN DATE: Monday, December 5, 2005
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A ! THREADS: 20,451
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================
BUFFER MANAGER SUMMARY

PHYSICAL DATA BASE PAGE REQUESTS 2,186,996 MEDIA MANAGER READ REQUESTS 8,793
USABLE BUFFER NOT LOCATED BECAUSE VPOOL FULL 0 VIRTUAL STORAGE SHORTAGE EXPANSION FAILURES 0
UPDATES OF DATA BASE SYSTEM PAGES 185,094 SYSTEM PAGES WRITTEN TO DASD 28,546
WRITE I/OS BY MEDIA MANAGER 3,863 PAGES DEQUEUED FOR DESTRUCTIVE READ 2,499
PAGES DESTRUCTIVELY READ 2,499 ACTIVE BUFFERS IN POOL 4,390
READ PAGEFIXED WITHOUT REAL STORAGE 2 WRITE PAGEFIXED WITHOUT REAL STORAGE 0
BUFFER POOL DATA SET OPENED 1,478 MERGE PASSES FOR SORT 477
WORKFILES FOR MERGE PASSES 954 IMMEDIATE WRITES SYSTEM PAGES 3,372
SEQUENTIAL PREFETCH REQUESTS 12,450 LIST PREFETCH REQUESTS 3,836
PAGES READ DUE TO PREFETCH 158,238 MAX. WORKFILES CONCURRENTLY USED FOR MERGE 152
WORKFILES REJECTED DUE TO NO BUFFERS 0 INEFFICIENT MERGE DUE TO NO BUFFERS 0
PREFETCH DISABLED DUE TO NO BUFFERS 0 PREFETCH DISABLED DUE TO NO READ ENGINE 0
WRITE ENGINE UNAVAILABLE 0 DEFERRED WRITE THRESHOLD REACHED 0
DATA MANAGER THRESHOLD REACHED 0 MIGRATED DATASET ENCOUNTERED 0
VERTICAL DEFERRED WRITE THRESHOLD REACHED 1,818 DATASET RECALL TIMEOUTS 0
PREFETCH ASYNC READ I/OS 4,505 GETPAGE FAILURES DUE TO VPOOL FULL 0
GETPAGE FAILURES DUE TO VPOOL FULL 0 DYNAMIC PREFETCH REQUESTED 12,985
SUCCESSFUL VPOOL EXPANSION/CONTRACTION 0 SUCCESSFUL HPOOL EXPANSION/CONTRACTION 0
PAGES READ SYNC FROM HPOOL TO VPOOL 0 PAGES READ ASYNC FROM HPOOL TO VPOOL 0
UNSUCCESSFUL HPOOL TO VPOOL READS 0 PAGES WRITTEN SYNC FROM VPOOL TO HPOOL 0
PAGES WRITTEN ASYNC FROM VPOOL TO HPOOL 0 UNSUCCESSFUL VPOOL TO HPOOL WRITES 0
BUFFERS ALLOCATED FOR VPOOL 3,358,300 BUFFERS ALLOCATED FOR HPOOL 0
PAGES READ DYNAMIC PREFETCH 2,221 PAGES READ LIST PREFETCH 17
DYNAMIC PREFETCH READ I/OS 149 LIST PREFETCH READ I/OS 10
GETPAGES ISSUED BY SEQUENTIAL REQUEST 678,135 SYNC READ I/OS PERFORMED BY SEQUENTIAL REQ 1,633
UNSUCCESSFUL GETPAGE CONDITIONAL REQUEST 0 HIGHEST PREFETCH I/O STREAMS ALLOCATED 0
PREFETCH I/O STREAMS DENIED SHORT ON STORAGE 0 TOTAL PARALLEL QUERIES 0
I/O PARALLELISM DOWNGRADED SHORT ON STORAGE 0 PREFETCH QUANTITY REDUCED TO 50% NORMAL 0
PREFETCH QUANTITY REDUCED TO 25% NORMAL 0 PAGES READ ASYNC HPOOL TO VPOOL VIA ADMF 0
UNSUCCESSFUL HPOOL TO VPOOL READS VIA ADMF 0 PAGES WRITTEN ASYNC VPOOL TO HPOOL VIA ADMF 0
UNSUCCESSFUL VPOOL TO HPOOL WRITES VIA ADMF 0 HPOOL BUFFERS BACKED BY EXPANDED STORAGE 0

CA
PAGE: 4
CA MICS/DB2 DB2 DATA BASE SERVICES REPORT SUBPAGE: 4
RUN DATE: Monday, December 5, 2005
=================================================================================================================================
! ! !
! SYSID: A1A1 ! DB2 SYSTEM: RA1A ! THREADS: 20,451
! ! DB2 RELEASE: 8.1 !
=================================================================================================================================
ENVIRONMENTAL DESCRIPTOR MANAGEMENT POOL

AVERAGE MAXIMUM

NUMBER OF FAILURES DUE TO FULL EDM POOL 0 0

NUMBER OF PAGES IN EDM POOL 8,192 8,192
NUMBER OF REQUESTS FOR CURSOR TABLE SECTIONS 530 574
NUMBER OF LOADED CURSOR TABLE SECTIONS 1 5
NUMBER OF PAGES USED FOR CURSOR TABLE 1 2
NUMBER OF REQUESTS FOR PACKAGE TABLE SECTIONS 380 2,241
NUMBER OF LOADED PACKAGE TABLE SECTIONS 1 20
NUMBER OF PAGES USED FOR PACKAGE TABLE 1 5
MINIMUM NUMBER OF PAGES IN FREE CHAIN 101 7,259
NUMBER OF PAGES USED FOR DATA BASE DESCRIPTORS 0 0
NUMBER OF PAGES USED FOR SKELETON CURSOR TABLE 118 130
NUMBER OF PAGES USED FOR SKELETON PACKAGE TABLE 889 951

58 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

NUMBER OF REQUESTS FOR DATA BASE DESCRIPTORS 1,136 2,689

NUMBER OF LOADS OF DATA BASE DESCRIPTORS 2 46
---------------------------------------------------------------------------------------------------------------------------------

DATASET ACTIVITY

AVERAGE MAXIMUM

NUMBER OF DATASETS OPEN 1,110 1,274

NUMBER OF DATASETS AVAILABLE TO DRAIN 924 1,201
NUMBER OF DATASETS CLOSED VIA DRAIN 0 0
NUMBER OF SUCCESSFUL REOPENS 2,447 23,984

Figure 3-2. DB2 Data Base Services Report Sample

Chapter 3: REPORTS 59
3.1 Tabular Reports Overview

3.1.3.1 DB2 Database Services Report Format

The DB2 Database Services Report contains the following

sections:

o Identification
o Thread Summary
o SQL Calls
o Resource Limit Facility
o Plan Activity
o Package Activity
o Locking
o Buffer Manager
o Environmental Descriptor Management Pool
o Data Set Activity

Identification Section

RUN DATE Date the report was created.

REPORTING PERIOD Earliest and latest dates and

times found within the data.

SYSID Logical system identifier.

DB2 SYSTEM DB2 subsystem identifier.

DB2 RELEASE DB2 subsystem release identifier.

(DB2RELN)

Thread Summary Section

THREADS Number of threads created.

SQL Calls Section

SELECT Number of SELECT statements.

INSERT Number of INSERT statements.

UPDATE Number of UPDATE statements.

DELETE Number of DELETE statements.

DESCRIBE Number of DESCRIBE statements.

PREPARE Number of PREPARE statements.

60 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

OPEN Number of OPEN statements.

CLOSE Number of CLOSE statements.

FETCH Number of FETCH statements.

LABEL Number of LABEL statements.

DESCRIBE TABLE Number of DESCRIBE TABLE

statements.

LOCK TABLE Number of LOCK TABLE statements.

GRANT Number of GRANT statements.

REVOKE Number of REVOKE statements.

INCREMENTAL BIND Number of incremental binds

excluding prepares.

COMMENT Number of COMMENT ON statements.

SET SQLID Number of SET CURRENT SQLID

statements.

SET HOST VARIABLE Number of SET HOST VARIABLE

statements.

CREATE TABLE Number of CREATE TABLE

statements.

CREATE INDEX Number of CREATE INDEX

statements.

CREATE TABLESPACE Number of CREATE TABLESPACE

statements.

CREATE STOGROUP Number of CREATE STOGROUP

statements.

CREATE DATABASE Number of CREATE DATABASE

statements.

CREATE SYNONYM Number of CREATE SYNONYM

statements.

CREATE VIEW Number of CREATE VIEW statements.

Chapter 3: REPORTS 61
3.1 Tabular Reports Overview

DROP TABLE Number of DROP TABLE statements.

DROP INDEX Number of DROP INDEX statements.

DROP TABLESPACE Number of DROP TABLESPACE

statements.

DROP STOGROUP Number of DROP STOGROUP

statements.

DROP DATABASE Number of DROP DATABASE

statements.

DROP SYNONYM Number of DROP SYNONYM

statements.

DROP VIEW Number of DROP VIEW statements.

DROP PACKAGE Number of DROP PACKAGE

statements.

ALTER TABLE Number of ALTER TABLE statements.

ALTER INDEX Number of ALTER INDEX statements.

ALTER TABLESPACE Number of ALTER TABLESPACE

statements.

ALTER STOGROUP Number of ALTER STOGROUP

statements.

ALTER DATABASE Number of ALTER DATABASE

statements.

ALTER SYNONYM Number of ALTER SYNONYM

statements.

ALTER VIEW Number of ALTER VIEW statements.

ALTER PACKAGE Number of ALTER PACKAGE

statements

Resource Limit Facility Section

RESOURCE TABLE ID Nature of resource limit in

effect.

62 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

HOW LIMIT WAS DETERMINED Method resource limit was

determined.

SERVICE UNIT TIME LIMIT Number of CPU services units

allowed per dynamic SQL requests.

CPU TIME LIMIT CPU time limit allowed per

dynamic SQL requests.

HIGHEST CPU TIME USED Highest CPU time used for a

dynamic SQL statement.

Locking Section

DEADLOCKS Deadlock count.

SUSPENSIONS Suspension count.

TIMEOUTS Timeout count.

ESCALATED TO SHARED Number of escalations to shared

mode.

ESCALATED TO EXCLUSIVE Number of escalations to

exclusive mode.

MAX. PAGE LOCKS HELD Maximum number of page locks held

by DB2.

LATCH SUSPEND COUNT Number of suspends due to latch

conflict.

OTHER SUSPEND COUNT Number of suspends due to

something other than latch
conflict.

LOCK REQUEST COUNT Total number of IRLM lock

requests.

QUERY REQUEST COUNT Total number of IRLM query

requests.

CHANGE REQUEST COUNT Total number of IRLM change

requests.

OTHER IRLM REQUEST COUNT Total number of other IRLM

requests.

Chapter 3: REPORTS 63
3.1 Tabular Reports Overview

Plan Activity Section

ALLOCATE ATTEMPTS Requests to allocate a bound plan

for an agent. Represents the
number of times DB2 was requested
to create a thread by the
attachment facility for the user.
Does not include allocations for
DB2 system agents.

ALLOCATE SUCCESS Number of successful bound plan

allocations. Represents the
number of allocation attempts
counted in ALLOCATE ATTEMPTS that
completed successfully.

ALLOCATE NON-EXISTENT Requests to allocate a

PLANS non-existent plan ID. Represents
the number of agent allocation
attempts counted in ALLOCATE
ATTEMPTS that did not complete
successfully, because the plan
did not exist.

BIND ATTEMPTS Number of times an automatic bind

was attempted. Occurs when the
plan has been invalidated by
modifications to the declarations
of the data referenced by the
programs bound as part of the
plan.

BIND SUCCESS Number of successful automatic

binds.

BIND ADD Number of BIND ACTION (ADD)

subcommands issued.

BIND REPLACE Number of BIND ACTION (REPLACE)

subcommands issued.

BIND TEST Number of bind subcommands issued

without a plan ID.

BIND BOUND AND Number of plans successfully

KEPT bound and kept for future agent
allocations. This count does not
include the test binds.

64 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

REBIND COMMANDS Number of REBIND subcommands

issued.

REBIND ATTEMPTS Number of attempts to rebind an

individual plan.

REBIND SUCCESS Number of times a plan was

successfully rebound.

FREE COMMANDS Number of FREE subcommands

issued.

FREE ATTEMPTS Number of attempts to free an

individual plan.

FREE SUCCESS Number of times a plan was

successfully freed.

Package Activity Section

ALLOCATE ATTEMPTS Requests to allocate a bound

package for an agent.
Represents the number of times
DB2 was requested to create a
thread by the attachment
facility for the user. Does not
include allocations for DB2
system agents.

ALLOCATE SUCCESS Number of successful bound

package allocations. Represents
the number of allocation
attempts counted in ALLOCATE
ATTEMPTS that completed
successfully.

BIND ATTEMPTS Number of times an automatic bind

was attempted. Occurs when the
package has been invalidated by
modifications to the declarations
of the data referenced by the
programs bound as part of the
package.

BIND SUCCESS Number of successful automatic

binds.

BIND ADD Number of BIND ACTION (ADD)

Chapter 3: REPORTS 65
3.1 Tabular Reports Overview

subcommands issued.

BIND REPLACE Number of BIND ACTION (REPLACE)

subcommands issued.

BIND BOUND AND Number of packages successfully

KEPT bound and kept for future agent
allocations. This count does not
include the test binds.

REBIND COMMANDS Number of REBIND subcommands

issued.

REBIND ATTEMPTS Number of attempts to rebind an

individual package.

REBIND SUCCESS Number of times a package was

successfully rebound.

FREE COMMANDS Number of FREE subcommands

issued.

FREE ATTEMPTS Number of attempts to free an

individual package.

FREE SUCCESS Number of times a package was

successfully freed.

Buffer Manager Section (listed in alphabetical order)

ACTIVE BUFFERS IN Total number of active buffers,

POOL summarized across all active DB2
buffer pools. (DSDSABBP)

BUFFER POOL DATA Total number of buffer pool data

SET OPENED sets that were opened by the DB2
system for all active DB2 buffer
pools. (DSDSBPSO)

BUFFERS ALLOCATED Total number of buffers

FOR HPOOL allocated for all active virtual
buffer pools. (DSDSHPL)

BUFFERS ALLOCATED Total number of buffers allocated

FOR VPOOL for a virtual buffer pool,
summarized across all active DB2
buffer pools. (DSDSVPL)

66 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

DATA MANAGER Total number of times the WPHFWT

THRESHOLD REACHED deferred write threshold was
reached in the DB2 system during
an interval for all active
buffer pools. (DSDSDMCT)

DATASET RECALL Total number of times a recall

TIMEOUTS time out of a migrated data set
was encountered by the DB2 system
during the interval, summarized
across all active DB2 buffer
pools. (DSDSTRTO)

DEFERRED WRITE Total number of times the

THRESHOLD REACHED deferred write threshold was
reached in the DB2 system during
an interval for all active DB2
buffer pools. (DSDSDWRT)

DYNAMIC PREFETCH Total number of asynchronous

READ I/OS read I/Os due to dynamic prefetch
for all active DB2 buffer pools.
(DSDSDIO)

DYNAMIC PREFETCH Total number of dynamic

REQUESTED prefetch requests for all active
DB2 buffer pools. Dynamic
prefetch is the process that is
triggered because of sequential
detection. (DSDSDPF)

GETPAGE FAILURES DUE Total number of times a usable

TO VPOOL FULL buffer could not be located in
the active virtual buffer pools.
(DSDSXFL)

GETPAGES ISSUED BY Total number of GETPAGE

SEQUENTIAL REQUEST requests issued by sequential
access requesters, summarized
across all active DB2 buffer
pools. (DSDSSGT)

HIGHEST PREFETCH Total number of concurrent

I/O STREAMS ALLOCATED prefetch I/O streams that were
allocated for supporting queries
processed in parallel for all
active DB2 buffer pools.
(DSDSXIS)

Chapter 3: REPORTS 67
3.1 Tabular Reports Overview

HPOOL BUFFERS BACKED Total number of hiperpool

BY EXPANDED STORAGE buffers currently backed by
expanded storage for all active
DB2 buffer pools. (DSDSHBE)

I/O PARALLELISM Total number of times that DB2

DOWNGRADED SHORT ON could not allocate the requested
STORAGE number of buffer pages to allow
a parallel group to run to the
planned degree, summarized across
all active DB2 buffer pools.
(DSDSPQF)

IMMEDIATE WRITES Total number of immediate writes

SYSTEM PAGES for system pages by the DB2
system during the interval for
all active DB2 buffer pools.
(DSDSIMWS)

INEFFICIENT MERGE DUE Total number of times that the

TO NO BUFFERS merge pass could not be
efficiently performed, summarized
for all active DB2 buffer pools,
due to the shortage of buffer
space. (DSDSWFF)

LIST PREFETCH READ Total number of asynchronous read

I/OS I/Os due to list prefetch for all
active DB2 buffer pools.
(DSDSLIO)

LIST PREFETCH REQUESTS Total number of list prefetch

requests for all active DB2
buffer pools. (DSDSLPF)

MAX. WORKFILES Total number of work files (runs)

CONCURRENTLY USED that have ever been concurrently
FOR MERGE used during merge processing
within this statistics period,
summarized for all active DB2
buffer pools. (DSDSWFM)

MEDIA MANAGER READ Total number of media manager

REQUESTS read requests for all active DB2
buffer pools. (DSDSMMRR)

MERGE PASSES FOR Total number of merge passes DB2

68 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

SORT sort activities summarized for

all active DB2 buffer pool.
(DSDSWFR)

MIGRATED DATASET Total of the number of times

ENCOUNTERED migrated data sets were
encountered, summarized across
all active DB2 buffer pools.
(DSDSTMIG)

PAGES DEQUEUED FOR Total number of pages dequeued

DESTRUCTIVE READ from VDWQ for destructive read,
summarized across all active DB2
buffer pools. (DSDSWBVQ)

PAGES DESTRUCTIVELY Total number of pages for which

READ destructive read was requested,
summarized across all active DB2
buffer pools. (DSDSWDRP)

PAGES READ ASYNC FROM Total number of pages moved from

HPOOL TO VPOOL all active hiperpools to all
active virtual buffer pools
asynchronously. (DSDSHRA)

PAGES READ ASYNC HPOOL Total number of pages moved from

TO VPOOL VIA ADMF a hiperpool to a virtual buffer
pool via ADMF for all active DB2
buffer pools. (DSDSARA)

PAGES READ DUE TO Number of pages read by DB2 after

PREFETCH it anticipated the need to read
ahead due to a large volume of
sequential processing, which can
be caused either by a utility or
an SQL statement performing a
large tablespace scan.
(DSDSSPPF)

PAGES READ DYNAMIC Total number of pages read

PREFETCH asynchronously due to dynamic
prefetch for all active DB2
buffer pools. (DSDSDPP)

PAGES READ LIST Total number of pages read

PREFETCH asynchronously due to list
prefetch for all active DB2
buffer pools. (DSDSLPP)

Chapter 3: REPORTS 69
3.1 Tabular Reports Overview

PAGES READ SYNC FROM Total number of successful

HPOOL TO VPOOL synchronous requests to move
pages from all active hiperpools
to all active virtual buffer
pools. (DSDSHRE)

PAGES WRITTEN ASYNC Total number of pages moved from

VPOOL TO HPOOL VIA a virtual buffer pool to a
ADMF hiperpool via ADMF for all active
DB2 buffer pools. (DSDSAWA)

PAGES WRITTEN SYNC Total number of pages moved from

FROM HPOOL TO VPOOL all active hiperpools to all
active virtual buffer pool
asynchronously. (DSDSHRA)

PHYSICAL DATABASE Count of physical database page

PAGE REQUESTS requests, summarized across all
active DB2 buffer pools.
(DSDSDBPR)

PREFETCH DISABLED DUE Total number of sequential

TO NO BUFFERS prefetch requests disabled due to
an unavailable buffer resource in
the DB2 system during an
interval, summarized across all
active DB2 buffer pools.
(DSDSSPDF)

PREFETCH DISABLED DUE Total number of sequential

TO NO READ ENGINE prefetch requests disabled due to
an unavailable read engine in the
DB2 system during an interval,
summarized across all active DB2
buffer pools. (DSDSREEP)

PREFETCH I/O STREAMS Total number of requested

DENIED SHORT ON prefetch I/O streams that were
STORAGE denied due to a storage shortage
for all active DB2 buffer pools.
(DSDSJIS)

PREFETCH QUANTITY Total number of times that the

REDUCED TO 25% NORMAL prefetch quantity was reduced
from normal to 1/4 normal,
summarized across all active DB2
buffer pools. (DSDSPL2)

PREFETCH QUANTITY Total number of times that the

70 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

REDUCED TO 50% NORMAL prefetch quantity was reduced

from normal to half normal,
summarized across all active DB2
buffer pools. (DSDSPL1)

READ PAGEFIXED WITHOUT Total number of times that a

REAL STORAGE buffer being page-fixed for read
operations did not have real
storage frame backing, summarized
across all active DB2 buffer
pools. (DSDSRFXS)

SEQUENTIAL PREFETCH Total number of sequential

REQUESTS prefetch requests of the DB2
system that occurred during the
interval, summarized across all
active DB2 buffer pools.
(DSDSSQPF)

SUCCESSFUL HPOOL Total number of successful

EXPANSION/CONTRACTION hiperpool expansions or
contractions because of the ALTER
BUFFERPOOL command for all active
buffer pools. (DSDSHPA)

SUCCESSFUL VPOOL Total number of successful

EXPANSION/CONTRACTION virtual buffer pool expansions or
contractions because of the ALTER
BUFFERPOOL command, summarized
across all active DB2 buffer
pools. (DSDSVPA)

SYNC READ I/OS Total number of synchronous read

PERFORMED BY I/Os issued by sequential access
SEQUENTIAL REQ requesters, summarized across all
active DB2 buffer pools.
(DSDSSIO)

SYSTEM PAGES WRITTEN Total number of system pages that

TO DASD were written to DASD, summarized
across all active DB2 buffer
pools. (DSDSSPWR)

TOTAL PARALLEL QUERIES Total number of requests made for

processing queries in parallel,
summarized across all active DB2
buffer pools. (DSDSPQO)

UNSUCCESSFUL GETPAGE Total number of times conditional

Chapter 3: REPORTS 71
3.1 Tabular Reports Overview

CONDITIONAL REQUEST GETPAGE requests could not be

satisfied for all active DB2
buffer pools. (DSDSNGT)

UNSUCCESSFUL HPOOL TO Total number of pages for which a

VPOOL READS synchronous or asynchronous read
request failed because the
backing-expanded storage page was
stolen by the system, summarized
for all active DB2 buffer pools.
(DSDSHRF)

UNSUCCESSFUL HPOOL TO Total number of pages for which a

VPOOL READS VIA ADMF read request failed because the
backing-expanded storage was
stolen for active DB2 buffer
pools. (DSDSARF)

UNSUCCESSFUL VPOOL TO Total number of pages for which

HPOOL WRITES a synchronous or asynchronous
write request failed because of a
shortage of expanded storage for
all active DB2 buffer pools.
(DSDSHWF)

UNSUCCESSFUL VPOOL TO Total number of pages for which a

HPOOL WRITES VIA ADMF write request failed because the
backing-expanded storage was
stolen for active DB2 buffer
pools. (DSDSAWF)

UPDATES OF DATABASE Total count (for all active

SYSTEM PAGES buffer pools) of the updates that
were performed against database
system pages during the interval.
(DSDSDBPU)

USABLE BUFFER NOT Total number of times a usable

LOCATED BECAUSE VPOOL buffer could not be located in
FULL the active virtual buffer pools.
(DSDSXFL)

VERTICAL DEFERRED WRITE Number of times the vertical

THRESHOLD REACHED deferred write threshold was
reached for all active DB2 buffer
pools. When the number of
updated pages for a data set
exceeds the vertical deferred
write threshold, deferred writes

72 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

are initiated for that data set.

(DSDSDWV)

VIRTUAL STORAGE Total of buffer pool expansion

EXPANSION FAILURES failures caused by virtual
storage shortage, summarized
across all active DB2 buffer
pools. (DSDSSSEF)

WORKFILES FOR MERGE Total number of work files that

PASSES have been requested for all of
the merge passes, summarized
across all active DB2 buffer
pools. (DSDSWFT)

WORKFILES REJECTED DUE Total number of work files

TO NO BUFFERS (runs), summarized for all active
DB2 buffer pools that were
rejected during all merge passes
due to insufficient buffer
resources. (DSDSWFD)

WRITE ENGINE Number of times a write engine

UNAVAILABLE was unavailable for I/O in the
DB2 system during an interval,
summarized across all active DB2
buffer pools. (DSDSWREE)

WRITE I/OS BY MEDIA Total number of write I/Os

MANAGER performed by the DB2 Media
Manager, summarized across all
active DB2 buffer pools.
(DSDSWRMM)

WRITE PAGEFIXED Number of times the active DB2

WITHOUT REAL buffer pools have been page-fixed
STORAGE to perform write I/O without real
storage frame backing. The
page-fix process must perform an
I/O operation to retrieve the
page's content from DASD storage
to a new real page frame.
(DSDSWFXS)

Environmental Descriptor Management Pool Section

NUMBER OF FAILURES DUE Number of DB2 transaction

TO FULL EDM POOL failures due to insufficient

Chapter 3: REPORTS 73
3.1 Tabular Reports Overview

virtual storage for EDM pool.

NUMBER OF PAGES IN EDM Number of pages in the EDM pool

POOL used to contain the skeleton
cursor tables and database
descriptors for a DB2 system.

NUMBER OF REQUESTS FOR Number of requests for cursor

CURSOR TABLE SECTIONS table sections or number of times
DB2 application programs
requested execution time.

NUMBER OF LOADED CURSOR Number of DB2 application

TABLE SECTIONS programs that were loaded for
execution.

NUMBER OF PAGES USED Number of EDM pool pages used to

FOR CURSOR TABLE load DB2 application programs.

NUMBER OF REQUESTS FOR Number of requests for package

PACKAGE TABLE SECTIONS table sections.

NUMBER OF LOADED Number of DB2 packages that were

PACKAGE TABLE SECTIONS loaded into the EDM pool.

NUMBER OF PAGES USED Number of EDM pool pages used to

FOR PACKAGE TABLE load packages.

NUMBER OF PAGES IN Number of unused pages in the EDM

FREE CHAIN pool.

NUMBER OF PAGES USED Number of EDM pool pages used for

FOR DATABASE database descriptors (DBDs) in
DESCRIPTORS the DB2 system.

NUMBER OF PAGES USED Number of pages used for skeleton

SKELETON CURSOR TABLE cursor tables.

NUMBER OF PAGES USED Number of pages used for skeleton

SKELETON PACKAGE TABLE package tables.

NUMBER OF REQUESTS FOR Number of active DBDs in the DB2

DATABASE DESCRIPTORS system.

NUMBER OF LOADS OF Number of DBDs the EDM pool was

DATABASE DESCRIPTORS able to actually process.

Data Set Activity Section

74 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

NUMBER OF DATASETS OPEN Number of data sets currently

open when SMF type 100 record is
cut.

NUMBER OF DATASETS Number of data sets not currently

AVAILABLE TO DRAIN in use that were specified with
CLOSE(YES), but have not been
physically closed.

NUMBER OF DATASETS Number of data sets closed via

CLOSED VIA DRAIN the drain process.

NUMBER OF SUCCESSFUL Frequency that data sets that had

REOPENS not previously been used became
used. The data set remained open
even though no process was using
it. This counter indicates that
the data set was eventually used
again. The larger the number in
this field, the better your
system is tuned for deferred
close.

Chapter 3: REPORTS 75
3.1 Tabular Reports Overview

3.1.4 DB2 Accounting Report

The DB2 Accounting Report provides an extract of the most
pertinent information from the DB2 User Activity File
(DB2DSU), which is created from the SMF Type 101 record. It
details the activity of active DB2 users.

The Accounting Report is normally produced as a part of the

DAILYRPT and MONTHRPT jobs, which are automatically submitted
during the DAILY and MONTHLY runs, respectively.

DAILYRPT executes the SAS program found in

The program will produce a separate report for each

DB2 subsystem.

To activate this report for use in DYDB2MBO or MNDB2MBO, you

must set the macro variable USRAREP=Y in the #DB2MOBJ member
of your unit library prefix.MICS.USER.SOURCE. The system
default report macro variable values are in
sharedprefix.MICS.SOURCE member #DB2MOBJ.

To create this report directly, ensure the macro variable

USRAREP is set equal to Y in member #DB2MOBJ of your unit
library prefix.MICS.USER.SOURCE. If you require the DDF
reporting block for this report, you must also set the macro
variable DDUREP=Y. Set all other macro variables to N to
produce ONLY the DB2 Accounting report. Finally, you must
execute the program DYDB2MBO or MNDB2MBO as is done in the
DAILYRPT and MONTHRPT jobs.

76 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

CA
PAGE: 1
CA MICS/DB2 DB2 ACCOUNTING REPORT SUBPAGE: 1
RUN DATE: Monday, July 17, 2006
================================================================================================================================
! ! ! !
SYSID:A1A1 ! DB2 SYSTEM: RA1A ! USER: * ALL * ! PLAN: * ALL * ! THREADS: 40479
! RELEASE: 8.1 !ORIGINAL USER: * ALL * ! FACILITY: * ALL * !
================================================================================================================================
CPU TIME

CLASS 1 TCB TIME 0:02:39.085 TOTAL I/O TIME 0:00:31.179

CLASS 1 zIIP TIME 0:00:34.173 TOTAL LOCK AND LATCH TIME 0:00:00.406
CLASS 1 ELAPSED TIME 8:07:39.445 OTHER READ TIME 0:00:45.111
CLASS 2 TCB TIME 0:02:07.258 OTHER WRITE TIME 0:00:12.373
CLASS 2 zIIP TIME 0:00:27.804 SERVICE TASK TIME 0:03:08.620
CLASS 2 ELAPSED TIME 0:13:22.783 ARCHIVE LOG TIME 0:00:00.000
zIIP ELIGIBLE TIME 0:00:00.000 NO. ENTRY/EXIT EVENTS 723,356
NO. WAIT TRACE EVENTS 22,376
--------------------------------------------------------------------------------------------------------------------------------

THREAD STATUS

NORMAL TERMINATION ABNORMAL TERMINATION WORK UNIT IN DOUBT

END OF TASK 3 APPLICATION ABENDED 0 APPLICATION ABENDED 0

APPLICATION ENDED 0 END OF MEMORY 0 END OF MEMORY 0
DEALLOCATION 20,673 RESOLVE INDOUBT 0 RESOLVE INDOUBT 0
NEW USER 0 FORCE COMMAND 0 FORCE COMMAND 0

--------------------------------------------------------------------------------------------------------------------------------

SQL CALLS

MANIPULATIVE STATEMENTS CONTROL STATEMENTS DEFINITIONAL STATEMENTS

SELECT 2,203 LOCK TABLE 0 CREATE DROP ALTER

INSERT 3,953 GRANT 2
UPDATE 2,251 REVOKE 0 TABLE 0 0 0
DELETE 3,357 INCREMENTAL BIND 0 INDEX 0 0 0
DESCRIBE 14,503 COMMENT 0 TABLESPACE 0 0 0
PREPARE 31,420 SET SQLID 22,657 STOREGROUP 0 0 0
OPEN 48,168 SET HOST VARIABLE 5 DATA BASE 0 0 0
CLOSE 20,169 SYNONYM 0 0
FETCH 68,314 VIEW 0 0
LABEL 0 PACKAGE 0
DESCRIBE TABLE 0

--------------------------------------------------------------------------------------------------------------------------------

COMMITS 50,689
ABORT REQUESTS 19,723
--------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 6:01:17 TO Friday, July 14, 2006 18:01:16
--------------------------------------------------------------------------------------------------------------------------------
CA
PAGE: 2
CA MICS/DB2 DB2 ACCOUNTING REPORT SUBPAGE: 2
RUN DATE: Monday, July 17, 2006
================================================================================================================================
! ! ! !
SYSID:A1A1 ! DB2 SYSTEM: RA1A ! USER: * ALL * ! PLAN: * ALL * ! THREADS: 40479
! RELEASE: 8.1 !ORIGINAL USER: * ALL * ! FACILITY: * ALL * !
================================================================================================================================

LOCKING

DEADLOCKS 0 RESOURCE TABLE ID 01 OTHER SUSPEND COUNT 10,149

SUSPENSIONS 10,237 HOW LIMIT WAS DETERMINED INFINITE LIMIT LOCK REQUEST COUNT 709,101
TIMEOUTS 0 SERVICE UNIT TIME LIMIT 0 QUERY REQUEST COUNT 3,156
ESCALATED TO SHARED 0 CPU TIME LIMIT 0:00:00.000 CHANGE REQUEST COUNT 178,248
ESCALATED TO EXCLUSIVE 1 HIGHEST CPU TIME USED 0:02:36.461 OTHER IRLM REQUEST COUNT 0
MAX. PAGE LOCKS HELD 30,664 LATCH SUSPEND COUNT 79

Chapter 3: REPORTS 77
3.1 Tabular Reports Overview

--------------------------------------------------------------------------------------------------------------------------------

BUFFER MANAGER SUMMARY

GETPAGE REQUESTS 2,179,916 RECORD IN SYSTEM PAGE UPDATED 182,218

SYNCHRONOUS READ I/O 8,434 SYNCHRONOUS WRITE I/O 3,118
SEQUENTIAL PREFETCH REQUESTS 12,450 LIST PREFETCH REQUESTS 3,837
DYNAMIC PREFETCH REQUESTS 12,982 SUCCESSFUL HIPERPOOL READS 0
UNSUCCESSFUL HIPERPOOL READS 0 SUCCESSFUL HIPERPOOL WRITES 0
UNSUCCESSFUL HIPERPOOL WRITES 0 UNSUCCESSFUL GET PAGE OPERATIONS 0
ASYNC PAGES READ BY PREFETCH 159,369 PAGES MOVED FROM HPOOL TO VPOOL 0
--------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 6:01:17 TO Friday, July 14, 2006 18:01:16
--------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 3
CA MICS/DB2 DB2 ACCOUNTING REPORT SUBPAGE: 3
RUN DATE: Monday, July 17, 2006
================================================================================================================================
! ! ! !
SYSID:A1A1 ! DB2 SYSTEM: RA1A ! USER: OPCPROD ! PLAN: * ALL * ! THREADS: 40479
! RELEASE: 8.1 !ORIGINAL USER: * ALL * ! FACILITY: * ALL * !
================================================================================================================================

DDF ACCOUNTING STATISTICS

REMOTE REQUESTING!-------------------------------------------------------------------------------------------------------------
LOCATION(S) ! DDF ! ABORT ! COMMIT ! CONVERS. ! SQL ! ROWS !------ MESSAGES ------!-- BYTES/1000 ----
(PROTOCOLS) ! THRDS ! RECEIVED ! RECEIVED ! RECEIVED ! RECEIVED ! SENT ! SENT ! RECEIVED ! SENT ! RECEIVED
------------------------------------------------------------------------------------------------------------------------------
DEGNO50R_DSN8 ! 11! 0 0 1 2,015 666 2,026 2,036 384 323
(DRDA & PRIVATE) ! AVG ! 0.0 0.0 0.1 183.2 60.5 184.2 185.1 34 29@
! MAX ! 0 0 1 200 71 201 202 39 32
! !
10.64.96.193 ! 12623! 5 249 0 95,741 3 38,411 38,411 27,354 27,184
(DRDA & PRIVATE) ! AVG ! 0.0 0.0 0.0 7.6 0.0 3.0 3.0 2,167@ 2@
! MAX ! 1 1 0 67 1 61 61 58 20
! !
10.64.98.1 ! 7272! 0 5,977 0 24,534 65 14,042 14,042 5,854 6,673
(DRDA & PRIVATE) ! AVG ! 0.0 0.8 0.0 3.4 0.0 1.9 1.9 805@ 1@
! MAX ! 0 1 0 39 3 22 22 23 9,436@
! !
10.96.139.43 ! 3! 0 3 0 7 0 10 10 1,117@ 786@
(DRDA & PRIVATE) ! AVG ! 0.0 1.0 0.0 2.3 0.0 3.3 3.3 372@ 262@
! MAX ! 0 1 0 3 0 4 4 478@ 318@
! !
10.96.139.93 ! 5! 0 0 0 0 0 0 0 0@ 0@
(DRDA & PRIVATE) ! AVG ! 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0@ 0@
! MAX ! 0 0 0 0 0 0 0 0@ 0@
! !
+-------------------------------------------------------------------------------------------------------------

@ - INDICATES THE REPORTED BYTE COUNT IS NOT DIVIDED BY 1000

--------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 6:01:17 TO Friday, July 14, 2006 18:01:16
--------------------------------------------------------------------------------------------------------------------------------

Figure 3-3. DB2 Accounting Report Sample

78 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

3.1.4.1 DB2 Accounting Report Format

The DB2 Accounting Report contains the following sections:

o Identification
o CPU Time Summary
o Thread Status
o SQL Calls
o Locking
o Miscellaneous
o Buffer Manager
o DDF Accounting

Identification Section

RUN DATE Date the report was created.

REPORTING PERIOD Earliest and latest dates and

times found within the data.

SYSID Logical system identifier.

DB2 SYSTEM DB2 subsystem identifier.

(DB2ID)

RELEASE DB2 subsystem release level.

(DB2RELN)

USER DB2 users included in this

report (possibly a group user
ID). (DB2AUTH)

ORIGINAL USER DB2 user ID of the original user

associated with a group user ID.
(DB2OPID)

PLAN DB2 plans included in this

report. (DB2PLAN)

FACILITY Facility identifier of requesting

environment (IMS, CICS, BATCH,
and so on) (DB2CONN)

THREADS The number of threads initiated,

or, when query CP parallelism is
in use, the number of parent
tasks used to build this entry.
(DSUNTHRD)

Chapter 3: REPORTS 79
3.1 Tabular Reports Overview

CPU Time Section

CLASS 1 TCB TIME Total TCB time for the users/

plans/facilities included in this
report. This time may include
non-DB2 application TCB time for
facilities other than CICS.
(DSUTCBTM)

CLASS 1 zIIP TIME Total CPU time executing on a

z/OS Specialty Engine processor
for the users/plans/facilities
included in this report.
(DSUCPUZ1)

CLASS 1 ELAPSED TIME Total elapsed time for the users/

plans/facilities included in this
report. (DSUELPTM)

CLASS 2 TCB TIME Total IN-DB2 TCB time. This is

the TCB time charged back to the
user for work done in DB2.
(DSUTC2TM)

CLASS 2 zIIP TIME Total IN-DB2 CPU time executing

on a z/OS Specialty Engine
processor. (DSUCPUZ2)

CLASS 2 ELAPSED TIME Total IN-DB2 elapsed time. This

is the elapsed time spent waiting
for DB2 to service this request.
(DSUET2TM)

zIIP ELIGIBLE TIME Total CPU time that executed on a

standard CP for zIIP-eligible
work. (DSUELGZP)

TOTAL I/O TIME Total time the IMS, CICS, or TSO

user's address space waited for
I/O in DB2. (DSUIOETM)

TOTAL LOCK AND LATCH Total time the IMS, CICS, or TSO
TIME user's address space waited for
locks and latches in DB2.
(DSUALLTM)

80 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

under another thread. (DSUAWRTM)

OTHER WRITE TIME Total time for write I/O done

under another thread. (DSUAWWTM)

SERVICE TASK TIME Total wait time due to

synchronous execution unit switch
to DB2 services from a thread.
(DSUAWETM)

ARCHIVE LOG TIME Total wait time due to processing

ARCHIVE LOG MODE(QUIESCE)
commands. (DSUALGTM)

NO. ENTRY/EXIT EVENTS Number of entry and exit events

processed to calculate the
elapsed times in DB2. (DSUENTEX)

NO. WAIT TRACE EVENTS Number of entry and exit events

processed to calculate the I/O,
lock, and latch elapsed wait
times. (DSUWATTR)

Thread Status Section

NORMAL End of task, application program

END OF TASK terminated.

NORMAL End of task, application program

APPLICATION ENDED termination.

NORMAL Deallocation, normal program

DEALLOCATION termination.

NORMAL New user, authorization ID

NEW USER changed.

ABNORMAL End of task, application program

APPLICATION ABENDED ABEND.

ABNORMAL End of memory, abnormal

END OF MEMORY termination.

ABNORMAL Resolve indoubt.

RESOLVE INDOUBT

ABNORMAL STOP DB2 MODE (FORCE) command

FORCE COMMAND issued.

Chapter 3: REPORTS 81
3.1 Tabular Reports Overview

WORK UNIT IN DOUBT End of task, application program

APPLICATION ABENDED ABEND.

WORK UNIT IN DOUBT End of memory, abnormal

END OF MEMORY termination.

WORK UNIT IN DOUBT Resolve indoubt.

RESOLVE INDOUBT

WORK UNIT IN DOUBT STOP DB2 MODE (FORCE) command

FORCE COMMAND issued.

SQL Calls Section

SELECT Number of SELECT statements.

INSERT Number of INSERT statements.

UPDATE Number of UPDATE statements.

DELETE Number of DELETE statements.

DESCRIBE Number of DESCRIBE statements.

PREPARE: Number of PREPARE statements.

OPEN: Number of OPEN statements.

CLOSE Number of CLOSE statements.

LOCK TABLE Number of LOCK TABLE statements.

GRANT Number of GRANT statements.

REVOKE Number of REVOKE statements.

INCREMENTAL BIND Number of incremental binds

excluding prepares.

COMMENT Number of COMMENT ON statements.

SET SQLID Number of SET CURRENT SQLID

statements.

SET HOST VARIABLE Number of SET HOST VARIABLE

statements.

82 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

CREATE TABLE Number of CREATE TABLE

statements.

CREATE INDEX: Number of CREATE INDEX

statements.

CREATE TABLESPACE Number of CREATE TABLESPACE

statements.

CREATE STOGROUP Number of CREATE STOGROUP

statements.

CREATE DATABASE Number of CREATE DATABASE

statements.

CREATE SYNONYM Number of CREATE SYNONYM

statements.

CREATE VIEW Number of CREATE VIEW statements.

DROP TABLE Number of DROP TABLE statements.

DROP INDEX Number of DROP INDEX statements.

DROP TABLESPACE: Number of DROP TABLESPACE

statements.

DROP STOGROUP Number of DROP STOGROUP

statements.

DROP DATABASE Number of DROP DATABASE

statements.

DROP SYNONYM Number of DROP SYNONYM

statements.

DROP VIEW Number of DROP VIEW statements.

DROP PACKAGE Number of DROP PACKAGE

statements.

ALTER TABLE Number of ALTER TABLE statements.

ALTER INDEX Number of ALTER INDEX statements.

ALTER TABLESPACE Number of ALTER TABLESPACE

statements.

ALTER STOREGROUP Number of ALTER STOREGROUP

Chapter 3: REPORTS 83
3.1 Tabular Reports Overview

statements.

ALTER DATABASE Number of ALTER DATABASE

statements.

FETCH Number of FETCH statements.

LABEL Number of LABEL statements.

DESCRIBE TABLE Number of DESCRIBE TABLE

statements.

Locking Section

DEADLOCKS Deadlock count.

SUSPENSIONS Suspension count.

TIMEOUTS Timeout count.

ESCALATED TO SHARED Number of lock escalations to

shared mode.

ESCALATED TO EXCLUSIVE Number of lock escalations to

exclusive mode.

MAX. PAGE LOCKS HELD Maximum number of page locks held

by a DB2 user.

RESOURCE TABLE ID Nature of resource limit in

effect.

HOW LIMIT WAS DETERMINED Method resource limit was

determined.

SERVICE UNIT TIME LIMIT Number of CPU services units

allowed per dynamic SQL requests.

CPU TIME LIMIT CPU time limit allowed per

dynamic SQL requests.

HIGHEST CPU TIME USED Highest CPU time used for a

dynamic SQL statement.

LATCH SUSPEND COUNT Number of suspends due to latch

conflict.

OTHER SUSPEND COUNT Number of suspends due to

something other than latch

84 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

conflict.

LOCK REQUEST COUNT Total number of IRLM lock

requests.

QUERY REQUEST COUNT Total number of IRLM query

requests.

CHANGE REQUEST COUNT Total number of IRLM change

requests.

OTHER IRLM REQUEST COUNT Total number of other IRLM

requests.

Miscellaneous Section

COMMIT PHASE TWO Number of commit phase two

invocations.

ABORT REQUESTS Number of abort requests.

Buffer Manager Section

GETPAGE REQUESTS Number of GETPAGE requests.

GETPAGE CAUSED BUFFER Number of GETPAGE requests that

POOL EXPANSION caused a buffer pool expansion.
This expansion occurs only when
all the pool's buffers are in a
nonreusable state. The thread
that is expanding will remain in
that state until a COMMIT or
ABORT statement is executed.
(DB2 V2.3 only)

RECORD IN SYSTEM Number of records residing in a

PAGE UPDATED system page that were updated.

UNIT OF WORK PAGE Number of units of work that

UPDATED were updated. (DB2 V2.3 only)

SYNCHRONOUS READ I/O Number of synchronous read I/Os.

SYNCHRONOUS WRITE I/O Number of synchronous write I/Os.

SEQUENTIAL PREFETCH Number of sequential prefetch

REQUESTS read requests by user

Chapter 3: REPORTS 85
3.1 Tabular Reports Overview

application.

LIST PREFETCH REQUESTS Number of list prefetch read

requests by user application

DYNAMIC PREFETCH: Total number of Dynamic Prefetch

REQUESTS Requests for all active DB2
buffer pools. Dynamic prefetch
is the process that is triggered
because of sequential detection.
(DSUDPFn) (DB2 V3.1 only)

SUCCESSFUL HIPERPOOL Total number of successful

READS synchronous requests to move
pages from all active hiperpools
to all active virtual buffer
pools. (DSUSHRE) (DB2 V3.1 only)

UNSUCCESSFUL HIPERPOOL Total number of pages for which a

READS synchronous or asynchronous read
request failed because the
backing expanded storage page was
stolen by the system, summarized
for all active DB2 buffer pools.
(DSUSHRF) (DB2 V3.1 only)

SUCCESSFUL HIPERPOOL Total number of successful

WRITES requests to move a page from a
virtual buffer pool to a
hiperpool for all active DB2
buffer pools. (DSUSHWR)
(DB2 V3.1 only)

UNSUCCESSFUL HIPERPOOL Total number of pages for which

WRITES a synchronous or asynchronous
write request failed because of a
shortage of expanded storage for
all active DB2 buffer pools.
(DSUSHWF) (DB2 V3.1 only)

UNSUCCESSFUL GETPAGE Total number of times conditional

OPERATIONS getpage requests could not be
satisfied for all active DB2
buffer pools. (DSUSNGT)
(DB2 V3.1 only)

ASYNC PAGES READ BY Total number of synchronous read

PREFETCH I/Os issued by sequential access
requesters, summarized across all

86 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

active DB2 buffer pools.

(DSUSSIO) (DB2 V3.1 only)

PAGES MOVED FROM HPOOL Total number of pages moved from

TO VPOOL hiperpools to virtual buffer
pools due to prefetch that the
agent triggered for all active
DB2 buffer pools. (DSUSHPG)
(DB2 V3.1 only)

DDF Accounting Section

LOCATION Location Identifier for a Remote

DB2 Subsystem. (DB2RLOCN)

DDF THREADS Count of SMF 101 DDF accounting

segments included in this entry.
The second and third lines of
this column indicate average and
maximum reporting for each
location. (DDUNTHRD)

LOCAL ELAPSED Total time spent waiting at the

local DB2 for remote DB2
processing of a distributed
request. (DDUELPL)

REMOTE ELAPSED Total time spent processing

distributed request as measured
from the remote serving DB2
subsystem.(DDUELPR)

REMOTE CPU Total CPU time (SRB at remote

site spent processing SQL
requests. (DDUCPUR)

CONVERS. (SENT/RECEIVED) VTAM Conversations Sent or

Received. Sent (DDUCNVS)
Received (DDUCNVR)

CONVERS. QUEUED VTAM Conversations Queued

(DDUCNVQ) to be sent to remote
site.

ABORTS (SENT/RECEIVED) Abort Messages Sent or Received.

Sent (DDUABRS) Received (DDUABRR)

COMMITS (SENT/RECEIVED) COMMIT Messages Sent or Received.

Chapter 3: REPORTS 87
3.1 Tabular Reports Overview

Sent (DDUCOMS) Received (DDUCOMR)

SQL SENT/RECEIVED SQL Statements Sent or Received.

Sent (DDUSQLS) Received (DDUSQLR)

DATA ROWS SENT Data rows sent to the remote

site. (DDUROWS)

DATA ROWS FROM Data rows received from the

remote site. (DDUROWR)

MESSAGES SENT TO VTAM Messages sent to the remote

site. (DDUMSGS)

MESSAGES RECEIVED FROM VTAM Messages received from the

remote site. (DDUMSGR)

BYTES/1000 SENT Number of bytes sent to the

remote site (DDUROWS) divided by
1000. If the total byte count is
less than 10000, the division
by 1000 is not performed and the
report variable is flagged.

BYTES/1000 RECEIVED Number of bytes received from

remote (DDUROWR) divided by 1000.
If the total byte count is less
than 10000, the division by
1000 is not performed and the
report variable is flagged.

88 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

3.1.5 DB2 Calendar Report

The DB2 Calendar Report provides an extract of key DB2
activity indicators from the DB2 System Activity and the DB2
Data Base Activity files. It presents this information in
calendar form, showing the activity indicators for each day
of the month.

The Calendar Report is normally produced as a part of the

DAILYRPT and MONTHRPT jobs which are automatically submitted
during the DAILY and MONTHLY runs, respectively.

DAILYRPT executes the SAS program found in

sharedprefix.MICS.SOURCE(DYDB2MBO) while MONTHRPT executes
sharedprefix.MICS.SOURCE(MNDB2MBO). Both of these programs
prepare data and then execute the SAS CALENDAR procedure.

Because of their relative simplicity, the statements for PROC

CALENDAR were not placed in a separate source library member.
The user is free to develop additional reports using this
SAS facility.

To activate this report for use in DYDB2MBO or MNDB2MBO, you

must set the macro variable CALREP=Y in the #DB2MOBJ member
of your unit library prefix.MICS.USER.SOURCE. The system
default macro variable values are in sharedprefix.MICS.SOURCE
member #DB2MOBJ.

Chapter 3: REPORTS 89
3.1 Tabular Reports Overview

CA
DAILY DB2 SUMMARY

System Identifier=SYSB DB2 ID=DSN2

September 2005

-------------------------------------------------------------------------------------------------------------------------------
| SUNDAY | MONDAY | TUESDAY | WEDNESDAY | THURSDAY | FRIDAY | SATURDAY |
|-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------|
| | | | | 1 | 2 | 3 |
| | | | | | | |
| | | | | 20 THREADS | 135 THREADS | 0 THREADS |
| | | | | 2 ABORTS | 27 ABORTS | 0 ABORTS |
| | | | | 18 BINDS | 135 BINDS | 0 BINDS |
| | | | | 10 SECONDS | 16 SECONDS | 12 SECONDS |
|-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------|
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| | | | | | | |
| 417 THREADS | 432 THREADS | 1,914 THREADS | 33 THREADS | 2 THREADS | 55 THREADS | 0 THREADS |
| 190 ABORTS | 178 ABORTS | 222 ABORTS | 2 ABORTS | 0 ABORTS | 2 ABORTS | 0 ABORTS |
| 416 BINDS | 431 BINDS | 1,909 BINDS | 33 BINDS | 1 BINDS | 49 BINDS | 0 BINDS |
| 17 SECONDS | 17 SECONDS | 22 SECONDS | 8 SECONDS | 10 SECONDS | 14 SECONDS | 6 SECONDS |
|-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------|
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| | | | | | | |
| 0 THREADS | 56 THREADS | 50 THREADS | 95 THREADS | | | |
| 0 ABORTS | 5 ABORTS | 8 ABORTS | 23 ABORTS | | | |
| 0 BINDS | 51 BINDS | 41 BINDS | 78 BINDS | | | |
| 5 SECONDS | 15 SECONDS | 16 SECONDS | 12 SECONDS | | | |
|-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------|
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
|-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------|
| 25 | 26 | 27 | 28 | 29 | 30 | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
-------------------------------------------------------------------------------------------------------------------------------
-------------------------------
| | SUM |
| THREADS | 3209 |
| ABORTS | 659 |
| BINDS | 3162 |
| TCB TIME | 186.8240118 |
-------------------------------

Figure 3-4 DB2 Calendar Report Sample

90 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

3.1.5.1 DB2 Calendar Report Format

The DB2 Calendar Report contains the following sections:

o Identification
o Daily Data Section
o Legend Section

Identification Section

RUN DATE The date that the report was

created.

SYSID The logical system identifier.

DB2 SYSTEM The DB2 subsystem identifier.

REPORTING PERIOD The month of the year for this

calendar.

Daily Data Section

THREADS The number of threads created on

this day.

ABORTS The number of abort requests on

this day.

BINDS The number of successful bound

plan allocations on this day.

SECONDS The TCB time reported by the

accounting system on this day.

Legend Section

THREADS The total number of threads

created this month.

ABORTS The total number of abort

requests this month.

BINDS The total number of successful

bound plan allocations this
month.

Chapter 3: REPORTS 91
3.1 Tabular Reports Overview

SECONDS The total TCB time reported by

the accounting system this month.

92 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

3.1.6 DB2 Plan Performance Summary Report

The DB2 Plan Performance Summary Report provides an extract
of the most pertinent summary information from the DB2 Plan
Activity File (DB2DSP), which is created from the SMF type
101 record. It summarizes the activity of active DB2 plans.

The Plan Performance Summary Report is normally produced as a

part of the DAILYRPT and MONTHRPT jobs, which are
automatically submitted during the DAILY and MONTHLY runs,
respectively.

DAILYRPT executes the SAS program found in

The program will produce a separate report for each

combination of SYSID and DB2 system.

To activate this report for use in DYDB2MBO or MNDB2MBO, you

must set the macro variable PLANSUM=Y in the #DB2MOBJ member
of your unit library prefix.MICS.USER.SOURCE. The system
default report macro variable values are in
sharedprefix.MICS.SOURCE member #DB2MOBJ.

To create this report directly, ensure the macro variable

PLANSUM is set equal to Y in member #DB2MOBJ of your unit
library prefix.MICS.USER.SOURCE. Set all other macro
variables to N to produce ONLY the DB2 Plan Performance
Summary Report. Finally, you must execute the program
DYDB2MBO or MNDB2MBO, as is done in the DAILYRPT and MONTHRPT
jobs.

Chapter 3: REPORTS 93
3.1 Tabular Reports Overview

CA MICS/DB2 DB2 PLAN PERFORMANCE SUMMARY PAGE: 1

RUN DATE: Monday, December 5, 2005 SUBPAGE: 1

================================================================================================================================
! !
SYSID:A1A1 ! DB2 SYSTEM: RA1A ! SUMMARY REPORT
! RELEASE: 8.1 !
================================================================================================================================

AVG AVG AVG AVG TOTAL TOTAL

CONNECT TOTAL AVG AVG TOTAL AVG SYNC. SEQ. MAX PG UPDATE DEAD TOTAL TIME- TOTAL
PLAN FACILITY COUNT TCB SEC TCB SEC ELAPSED GETPAGE GETPAGE READ PREFETCH LOCKS PAGE LOCK SUSP OUT ABORT
-------- -------- ------ ------- ------- ------------ ------- ------- -------- -------- ------ ------ ------ ------ ------ -----
B2RHPIN * ALL * 22 0.42796 0.01945 0:00:00.229 12377 562.591 3.63636 0.31818 0.7727 192.77 0 0 0 0
CSMHR01 * ALL * 11 0.81572 0.07416 0:00:00.417 21748 1977.09 2.27273 0.90909 2 0 0 0 0 0
CSQ5D531 * ALL * 1 0.00438 0.00438 0:00:00.141 20 20 7 2 2 5 0 0 0 0
CSQ5L531 * ALL * 17419 12.4022 0.00071 0:00:00.001 35053 2.01234 0.00034 0 0 0 0 0 0 17268
CSQ5R531 * ALL * 13 0.01062 0.00082 0:00:00.011 43 3.30769 0.53846 0 0.1538 0.0769 0 0 0 6
CSQ5S531 * ALL * 1440 1.00569 0.0007 0:00:00.001 2880 2 0 0 0 0 0 0 0 1440
CSQ5U532 * ALL * 1 0.00141 0.00141 0:00:00.054 3 3 0 0 1 1 0 0 0 0
CSQ5W531 * ALL * 1 0.00597 0.00597 0:00:00.214 32 32 16 0 2 6 0 0 0 0
DB2CPLAN * ALL * 4 0.01076 0.00269 0:00:00.062 16 4 0 0 0 0 0 0 0 0
DISTSERV * ALL * 19903 72.4451 0.00364 0:00:00.020 1017920 51.144 0.06944 0.31051 0.7304 1.663 0 67 0 122
DSNREXX * ALL * 2 0.00159 0.00079 0:00:00.001 0 0 0 0 0 0 0 0 0 0
DSNTEP2 * ALL * 48 10.5186 0.21914 0:00:00.565 515878 10747.5 19.2708 15.5 51.271 295.25 0 0 0 0
DSNUTIL * ALL * 29375 57.2005 0.00195 0:00:00.137 502021 17.0901 0.17185 0.14114 0.4609 4.0112 0 10149 0 3
RBPAPLAN * ALL * 2 0.0097 0.00485 0:00:00.087 62 31 2 0 1 12 0 0 0 0
RDPCPLAN * ALL * 39 0.74327 0.01906 0:00:03.237 8371 214.641 0.30769 0 0.1795 0 0 0 0 0
RDPPPLAN * ALL * 77 0.15962 0.00207 0:00:03.381 1769 22.974 0.62338 0.36364 0.1688 2.8831 0 0 0 0
RDPSPLAN * ALL * 672 1.27106 0.00189 0:00:00.727 18991 28.2604 0.95685 0.12054 0.0402 12.272 0 20 0 0
RQPAPLAN * ALL * 216 0.49825 0.00231 0:00:00.050 23189 107.356 0.47685 2.07407 0.0324 4.7037 0 1 0 0
RUPUPLAN * ALL * 1156 1.52063 0.00132 0:00:22.586 19249 16.6514 0.10813 0.69204 0.019 2.9014 0 0 0 884
SYDBSQL1 * ALL * 6 0.00916 0.00153 0:00:00.009 294 49 0.5 0.66667 0.5 0 0 0 0 0

REPORTING PERIOD Friday, September 3, 2004 6:01:17 TO Friday, September 3, 2004 18:01:16
--------------------------------------------------------------------------------------------------------------------------------

Figure 3-5. DB2 Plan Performance Summary Report Sample

94 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

3.1.6.1 PLAN Performance Summary Report Format

The PLAN Performance Summary Report contains the following

sections:

o Identification
o PLAN Summary
o Report Page End

Identification Section

RUN DATE Date the report was created.

SYSID Logical system identifier.

DB2 SYSTEM DB2 subsystem identifier. (DB2ID)

RELEASE DB2 subsystem release level.

(DB2RELN)

REPORTING PERIOD Earliest and latest dates and

times found within the data.

PLAN Summary Section

PLAN DB2 PLANs included in this

report. (DB2PLAN)

FACILITY Facility identifier of requesting

environment (IMS, CICS, BATCH,
and so on) (DB2CONN)

COUNT Total number of PLAN executions

used to generate this report
line. This value is calculated
as the greater of the number of
threads initiated (or the number
of parent tasks when query CP
parallelism is in use) or sum of
the commit phase 2 + aborts,
i.e., DSPNTHRD or (DSPCOMM2 +
DSPABORT)

TOTAL TCB SEC Total TCB time for the users/

PLANs/facilities included in this
report. This time may include
non-DB2 application TCB time for
facilities other than CICS.

Chapter 3: REPORTS 95
3.1 Tabular Reports Overview

(DSPTCBTM)

AVG TCB SEC Average TCB seconds per PLAN

execution. (DSPTCBTM/COUNT)

AVG ELAPSED Average elapsed time per PLAN

execution. This number is
computed using the following
algorithm:

- If COUNT is equal to DSPNTHRD

and any of the PLAN executions
used query CP parallelism:
<AVG ELAPSED> = DSPELPTM/COUNT

- Otherwise:
<AVG ELAPSED> = DSPTELPT/COUNT

TOTAL GETPAGE Total GETPAGE requests for all

executions of this PLAN.
(DSPSGPGR)

AVG GETPAGE Average GETPAGE requests for each

PLAN execution.
(<TOTAL GETPAGE>/COUNT)

AVG SYNC. READ Average synchronous reads per

execution of this PLAN. This
count does not include the
asynchronous sequential prefetch
reads. Total synchronous reads
are calculated as follows:
TOTAL SYNC READ = DSPSRIO

Then the average is computed.

(<TOTAL SYNC READ>/COUNT)

AVG SEQ. PREFETCH Average Prefetch reads per

execution of this PLAN. First
the total prefetch reads are
calculated as follows:
TOTAL SEQ. PREF = DSPSPRFH

Then the average prefetch read

requests are calculated as
follows:
(<TOTAL SEQ. PREF>/COUNT)

AVG MAX PG LOCKS The average maximum page locks

96 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

per PLAN execution is derived by

first summing all maximum page
lock counts for this plan
(DSPMXPL); then dividing that SUM
by the PLAN execution count
(COUNT). The result shows the
maximum number of pages that are
locked for each PLAN on average.
(DSPMXPL/COUNT)

AVG UPDATE PAGE The average number of unit-of-

work pages updated per PLAN
execution. First the total unit-
of-work page updates are
calculated as follows:

Then the average is calculated.

(<TOTAL UPD PAGE>/COUNT)

TOTAL DEADLOCK Total deadlocks detected by DB2

for all executions of this PLAN.
(DSPDEAD) The amount of time
allowed before deadlock detection
is determined at DB2 startup from
the IRLM parameters.
(DSPTIMO)

TOTAL SUSPEND Total suspend requests for this

PLAN. (DSPSUSP)

TOTAL TIMEOUT Total timeouts detected by DB2

for all executions of this PLAN.
A timeout occurs for PLAN waiting
for resources that are
unavailable. The amount of time
allowed before timeout processing
is initiated, is determined at
DB2 startup from the IRLM
parameters. (DSPTIMO)

TOTAL ABORT Total PLAN aborts for all

executions of this PLAN.
(DSPABORT)

Report Page End

REPORTING PERIOD Earliest and latest dates and

times found within the data.

Chapter 3: REPORTS 97
3.1 Tabular Reports Overview

3.1.7 DB2 Plan Performance Report

The DB2 Plan Performance Report provides an extract of the
most pertinent detail information from the DB2 Plan Activity
File (DB2DSP), which is created from the SMF type 101 record.
It details the activity of active DB2 plans.

The Plan Performance Report is normally produced as a part of

the DAILYRPT and MONTHRPT jobs, which are automatically
submitted during the DAILY and MONTHLY runs, respectively.

DAILYRPT executes the SAS program found in

sharedprefix.MICS.SOURCE(DYDB2MBO) while MONTHRPT executes
sharedprefix.MICS.SOURCE(MNDB2MBO). Both of these programs
prepare data and then execute the actual report generation
program located in sharedprefix.MICS.SOURCE(DB2PLNPT), which
produces the Plan Performance Report. This module also
invokes the Plan Performance Summary report (DB2PLNSM) if
summary reporting has been requested.

The program will produce a separate report for each

combination of SYSID, DB2 system, plan, user, jobname,
and facility. The system default is to set the User, Jobname
and Facility variables DB2AUTH, DB2CORR and DB2CONN to *ALL*.
This results in a detail report by plan within a DB2
subsystem for all plans being monitored.

To activate this report for use in DYDB2MBO or MNDB2MBO, you

must set the macro variable PLANREP=Y in the #DB2MOBJ member
of your unit library prefix.MICS.USER.SOURCE. The system
default report macro variable values are in
sharedprefix.MICS.SOURCE member #DB2MOBJ.

To create this report directly, ensure the macro variable

PLANREP is set equal to Y in member #DB2MOBJ of your unit
library prefix.MICS.USER.SOURCE. If you require the DDF
reporting block for this report you must also set the macro
variable DDPREP=Y. Set all other macro variables to N to
produce ONLY the DB2 Plan Performance Report. Finally, you
must execute the program DYDB2MBO or MNDB2MBO, as is done in
the DAILYRPT and MONTHRPT jobs.

98 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

CA
PAGE: 5
CA MICS/DB2 DB2 PLAN PERFORMANCE REPORT SUBPAGE: 1
RUN DATE: Monday, July 17, 2006
=================================================================================================================================
! ! ! !
SYSID: A1A1 ! DB2 SYSTEM: RA1A ! PLAN: CSMHR01 ! CORREL.: * ALL * ! THREADS: 11
! RELEASE: 8.1 ! ! FACILITY: * ALL * !
=================================================================================================================================
CPU TIME
CLASS 1 CLASS 2

TOTAL AVERAGE MAXIMUM TOTAL AVERAGE MAXIMUM

---------- ---------- ---------- ---------- ---------- ----------
ELAPSED TIME: 0:00:04.592 0:00:00.424 0:00:00.492 0:00:00.802 0:00:00.070 0:00:00.102
STANDARD CP CPU TIME: 0:00:00.816 0:00:00.074 0:00:00.084 0:00:00.734 0:00:00.067 0:00:00.076
zIIP CPU TIME: 0:00:00.145 0:00:00.013 0:00:00.024 0:00:00.112 0:00:00.010 0:00:00.014
zIIP ELIGIBLE TIME: 0:00:00.000 0:00:00.000 0:00:00.000 N/A N/A N/A

---------------------------------------------------------------------------------------------------------------------------------

ACCOUNTING CLASS 3 EVENTS

TOTAL AVERAGE MAXIMUM

----------- ----------- -----------
I/O TIME 0:00:00.03 0:00:00.00 0:00:00.01
LOCK AND LATCH TIME 0:00:00.00 0:00:00.00 0:00:00.00
OTHER READ TIME 0:00:00.00 0:00:00.00 0:00:00.00
OTHER WRITE TIME 0:00:00.00 0:00:00.00 0:00:00.00
SERVICE TASK TIME 0:00:00.00 0:00:00.00 0:00:00.00
ARCHIVE LOG TIME 0:00:00.00 0:00:00.00 0:00:00.00
ENTRY/EXIT EVENTS 4074 370.4 404
WAIT TRACE EVENTS 44 4.0 14

---------------------------------------------------------------------------------------------------------------------------------

THREAD STATUS

NORMAL TERMINATION ABNORMAL TERMINATION WORK UNIT IN DOUBT

END OF TASK 0 APPLICATION ABENDED 0 APPLICATION ABENDED 0

APPLICATION ENDED 0 END OF MEMORY 0 END OF MEMORY 0
DEALLOCATION 0 RESOLVE INDOUBT 0 RESOLVE INDOUBT 0
NEW USER 0 FORCE COMMAND 0 FORCE COMMAND 0
COMMITS 11 ABORT REQUESTS 0
---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 9:23:44 TO Friday, July 14, 2006 9:23:49
---------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 6
CA MICS/DB2 DB2 PLAN PERFORMANCE REPORT SUBPAGE: 2
RUN DATE: Monday, July 17, 2006
=================================================================================================================================
! ! ! !
SYSID: A1A1 ! DB2 SYSTEM: RA1A ! PLAN: CSMHR01 ! CORREL.: * ALL * ! THREADS: 11
! RELEASE: 8.1 ! ! FACILITY: * ALL * !
=================================================================================================================================

SQL CALLS

MANIPULATIVE STATEMENTS CONTROL STATEMENTS DEFINITIONAL STATEMENTS

SELECT 666 LOCK TABLE 0 CREATE DROP ALTER

INSERT 0 GRANT 0
UPDATE 0 REVOKE 0 TABLE 0 0 0
DELETE 684 INCREMENTAL BIND 0 INDEX 0 0 0
DESCRIBE 0 COMMENT 0 TABLESPACE 0 0 0
PREPARE 0 SET SQLID 0 STOREGROUP 0 0 0
OPEN 665 SET HOST VARIABLE 0 DATA BASE 0 0 0
CLOSE 0 SYNONYM 0 0
FETCH 665 VIEW 0 0

Chapter 3: REPORTS 99
3.1 Tabular Reports Overview

LABEL 0 ALIAS 0 0
DESCRIBE TABLE 0 PACKAGE 0

---------------------------------------------------------------------------------------------------------------------------------

MULTIPLE INDEX ACTIVITY

MIX INDEX NOT USED MIX INDEX NOT USED

MIX INDEX USED STORAGE LIMIT EXCEEDED RID LIMIT EXCEEDED
_______________ ______________________ ___________________
0 0 0
---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 9:23:44 TO Friday, July 14, 2006 9:23:49
---------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 7
CA MICS/DB2 DB2 PLAN PERFORMANCE REPORT SUBPAGE: 3
RUN DATE: Monday, July 17, 2006
=================================================================================================================================
! ! ! !
SYSID: A1A1 ! DB2 SYSTEM: RA1A ! PLAN: CSMHR01 ! CORREL.: * ALL * ! THREADS: 11
! RELEASE: 8.1 ! ! FACILITY: * ALL * !
=================================================================================================================================

LOCKING

TOTAL AVERAGE MAXIMUM

DEADLOCKS 0 0.0 0
SUSPENSIONS 0 0.0 0
TIMEOUTS 0 0.0 0
MAX. CONCUR. PAGELOCK 22 2.0 2

LOCK/LATCH TIME 0 0.0 0

LATCH SUSPEND COUNT 0 0.0 0
OTHER SUSPEND COUNT 0 0.0 0

ESCALATE TO SHARED 0 0.0 0

ESCALATE TO EXCLUSIVE 0 0.0 0

LOCK REQUEST COUNT 1,369 0.0 145

QUERY REQUEST COUNT 0 0.0 0
CHANGE LOCK REQUESTS 16 1.5 2
IRLM LOCK REQUEST (OTHER) 0 0.0 0
RESOURCE TABLE ID
HOW LIMIT WAS DETERMINED UNKNOWN
SERVICE UNIT TIME LIMIT 0
CPU TIME LIMIT 0:00:00.000
HIGHEST CPU TIME USED 0:00:00.000
---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 9:23:44 TO Friday, July 14, 2006 9:23:49
---------------------------------------------------------------------------------------------------------------------------------

CA
PAGE: 8
CA MICS/DB2 DB2 PLAN PERFORMANCE REPORT SUBPAGE: 4
RUN DATE: Monday, July 17, 2006
=================================================================================================================================
! ! ! !
SYSID: A1A1 ! DB2 SYSTEM: RA1A ! PLAN: CSMHR01 ! CORREL.: * ALL * ! THREADS: 11
! RELEASE: 8.1 ! ! FACILITY: * ALL * !
=================================================================================================================================

BUFFER MANAGER SUMMARY

TOTAL AVERAGE MAXIMUM

GETPAGE REQUESTS 21,748 1,977.1 2,284

RECORD IN SYSTEM PAGE UPDATED 0 0.0 0
SYNCHRONOUS READ I/O 25 2.3 10
SYNCHRONOUS WRITE I/O 0 0.0 0

100 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

SEQUENTIAL PREFETCH REQUESTS 10 0.9 7

LIST PREFETCH REQUESTS 0 0.0 0
DYNAMIC PREFETCH REQUESTS 33 3.0 3
SUCCESSFUL HIPERPOOL READS 0 0.0 0
UNSUCCESSFUL HIPERPOOL READS 0 0.0 0
SUCCESSFUL HIPERPOOL WRITES 0 0.0 0
UNSUCCESSFUL HIPERPOOL WRITES 0 0.0 0
UNSUCCESSFUL GET PAGE OPERATIONS 0 0.0 0
ASYNC PAGES READ BY PREFETCH 128 11.6 128
PAGES MOVED FROM HPOOL TO VPOOL 0 0.0 0

---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 9:23:44 TO Friday, July 14, 2006 9:23:49
---------------------------------------------------------------------------------------------------------------------------------

DDF PERFORMANCE STATISTICS

---------------------------------------------------------------------------------------------------------------
REMOTE REQUESTING! DDF ! ABORT ! COMMIT ! CONVERS. ! SQL ! ROWS !------ MESSAGES ------!-- BYTES/1000 -----
LOCATION(S) ! THRDS ! RECEIVED ! RECEIVED ! RECEIVED ! RECEIVED ! SENT ! SENT ! RECEIVED ! SENT ! RECEIVED
---------------------------------------------------------------------------------------------------------------------------------
DEGNO50R_DSN8 ! 11! 0 0 1 2,015 666 2,026 2,036 384 323
! AVG ! 0.0 0.0 0.1 183.2 60.5 184.2 185.1 34 29@
! MAX ! 0 0 1 200 71 201 202 39 32
! !
+---------------------------------------------------------------------------------------------------------------

@ - INDICATES THE REPORTED BYTE COUNT IS NOT DIVIDED BY 1000

---------------------------------------------------------------------------------------------------------------------------------
REPORTING PERIOD Friday, July 14, 2006 13:42:32 TO Friday, July 14, 2006 13:42:32
---------------------------------------------------------------------------------------------------------------------------------

Figure 3-6. DB2 Plan Performance Report Sample

Chapter 3: REPORTS 101

3.1 Tabular Reports Overview

3.1.7.1 DB2 Plan Performance Report Format

The DB2 Plan Performance Report contains the following

sections:

o Identification
o CPU Time
o Accounting Class 3 Events
o Thread Status
o SQL Calls
o Multiple Index Activity
o Locking
o Buffer Manager
o DDF Performance
o Page End

Identification Section

RUN DATE Date the report was created.

SYSID Logical system identifier.

DB2 SYSTEM DB2 subsystem identifier. (DB2ID)

RELEASE DB2 subsystem release level.

(DB2RELN)

PLAN DB2 plan(s) included in this

report. (DB2PLAN)

CORREL Job name of requesting

environment. (DB2CORR)

FACILITY Facility identifier of requesting

environment. (IMS, CICS, BATCH,
etc.) (DB2CONN)

THREADS The number of threads initiated

or the number of parent tasks
used to build this entry, when
query CP parallelism is in use.
(DSPNTHRD)

NOTE: In the calculation of

averages, a calculated
field DB2NTRAN is used.
DB2NTRAN is the greater of
DSPNTHRD or (DSPCOMM2 +

102 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

DSPABORT).

CPU Time Section

CLASS 1 ELAPSED TIME Elapsed time for this plan.

(DSPELPTM)

AVERAGE Average elapsed time for this DB2

PLAN. This average is calculated
as follows:

- If DB2NTRAN is equal to
DSPNTHRD and any of the PLAN
executions used query CP
parallelism:
<AVERAGE> = DSPELPTM/DB2NTRAN

- Otherwise:
<AVERAGE> = DSPTELPT/DB2NTRAN

MAXIMUM Maximum elapsed time for this DB2

PLAN. (DSPMELPT)

CLASS 2 ELAPSED TIME Total elapsed time spent in DB2

for this PLAN. (DSPET2TM)

AVERAGE Average elapsed time spent in DB2

for this DB2 PLAN. This average
is calculated as follows:

- If DB2NTRAN is equal to
DSPNTHRD and any of the PLAN
executions used query CP
parallelism:
<AVERAGE> = DSPET2TM/DB2NTRAN

- Otherwise:
<AVERAGE> = DSPTET2T/DB2NTRAN

MAXIMUM Maximum elapsed time spent in DB2

for this DB2 PLAN. (DSPMEL2T)

CLASS 1 TCB TIME Total TCB time for this PLAN.

This may include non-DB2 time for
facilities other than CICS.
(DSPTCBTM)

AVERAGE Average TCB time for this DB2

PLAN. This average is calculated

Chapter 3: REPORTS 103

3.1 Tabular Reports Overview

as DSPTCBTM/DB2NTRAN.

MAXIMUM Maximum TCB time for this DB2

PLAN. This may include non-DB2
time for facilities other than
CICS. (DSPMTCBT)

CLASS 2 TCB TIME Total TCB time spent in DB2

for this PLAN. (DSPTC2TM)

AVERAGE Average TCB time spent in DB2

for this DB2 PLAN. This average
is calculated as DSPTC2TM/
DB2NTRAN.

MAXIMUM Maximum TCB time spent in DB2 for

this DB2 PLAN. (DSPMTC2T)

CLASS 1 zIIP TIME Total CPU time executing on a

zIIP processor for this DB2 PLAN.
(DSPCPUZ1)

AVERAGE Average zIIP CPU time for this

DB2 PLAN. This average is
calculated as DSPCPUZ1/DB2NTRAN.

MAXIMUM Maximum zIIP CPU time for this

DB2 PLAN. (DSPMXZP1)

CLASS 2 zIIP TIME Total CPU time spent in DB2

executing on a zIIP processor
for this DB2 PLAN. (DSPCPUZ2)

AVERAGE Average zIIP CPU time spent in

DB2 for this DB2 PLAN. This
This average is calculated as
DSPCPUZ2/DB2NTRAN.

MAXIMUM Maximum zIIP CPU time spent in

DB2 for this DB2 PLAN.
(DSPMXZP2)

zIIP ELIGIBLE TIME Total CPU time that executed on a

standard CP for zIIP-eligible
work for this DB2 PLAN.
(DSPELGZP)

104 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

AVERAGE Average CPU time that executed on

a standard CP for zIIP-eligible
work for this DB2 PLAN. This
average is calculated as
DSPELGZP/DB2NTRAN.

MAXIMUM Maximum CPU time that executed on

a standard CP for zIIP-eligible
work for this DB2 PLAN.
(DSPMXZET)

Accounting Class 3 Events

TOTAL I/O TIME Total time the IMS, CICS, or TSO

user's address space waited for
I/O in DB2. (DSPIOETM)

AVERAGE I/O TIME Average time spent waiting on DB2

I/O for this PLAN. This average
is calculated as DSPIOETM/
DB2NTRAN.

MAXIMUM I/O TIME Maximum time this DB2 PLAN waited

for I/O in DB2. (DSPMIOTM)

TOTAL LOCK AND LATCH Total time this DB2 PLAN waited
TIME for locks and latches in DB2.
(DSPALLTM)

AVERAGE LOCK AND LATCH Average time this DB2 PLAN

TIME waited for locks and latches in
DB2. This average is calculated
as DSPALLTM/DB2NTRAN.

MAXIMUM LOCK AND LATCH Maximum time this DB2 PLAN waited
TIME for locks and latches in DB2.
(DSPMLLTM)

TOTAL OTHER READ TIME Total time this DB2 PLAN waited
for read I/O under another
thread. (DSPAWRTM)

AVERAGE OTHER READ TIME Average time this DB2 PLAN waited
for read I/O under another
thread. (DSPAWRTM/DB2NTRAN)

MAXIMUM OTHER READ TIME Maximum time this DB2 PLAN waited
for read I/O under another

Chapter 3: REPORTS 105

3.1 Tabular Reports Overview

thread. (DSPMWRTM)

TOTAL OTHER WRITE TIME Total time this DB2 PLAN waited
for write I/O under another
thread. (DSPAWWTM)

AVERAGE OTHER WRITE TIME Average time this DB2 PLAN waited
for write I/O under another
thread. (DSPAWWTM/DB2NTRAN)

MAXIMUM OTHER WRITE TIME Maximum time this DB2 PLAN waited
for write I/O under another
thread. (DSPMWWTM)

TOTAL SERVICE TASK TIME Total time this DB2 PLAN waited
due to synchronous execution
switch to DB2 services from a
thread. (DSPAWETM)

AVERAGE SERVICE TASK Average time this DB2 PLAN waited

TIME due to synchronous execution
switch to DB2 services from a
thread. (DSPAWETM/DB2NTRAN)

MAXIMUM SERVICE TASK Maximum time this DB2 PLAN waited

TIME due to synchronous execution
switch to DB2 services from a
thread. (DSPMWETM)

TOTAL ARCHIVE LOG TIME Total time this DB2 PLAN waited
due to processing of ARCHIVE LOG
MODE(QUIESCE) commands.
(DSPALGTM)

AVERAGE ARCHIVE LOG Average time this DB2 PLAN waited

TIME due to processing of ARCHIVE LOG
MODE(QUIESCE) commands.
(DSPALGTM/DB2NTRAN)

MAXIMUM ARCHIVE LOG Maximum time this DB2 PLAN waited

TIME due to processing of ARCHIVE LOG
MODE(QUIESCE) commands.
(DSPMLGTM)

TOTAL ENTRY/EXIT EVENTS Number of entry and exit events

processed to calculate the
accounting class 2 elapsed times
in DB2. (DSPENTEX)

106 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

AVERAGE ENTRY/EXIT Average number of entry and exit

EVENTS events processed to calculate the
accounting class 2 elapsed times
in DB2. This average is
calculated as DSPENTEX/DB2NTRAN.

MAXIMUM ENTRY/EXIT Maximum number of entry and exit

EVENTS events processed to calculate the
accounting class 2 elapsed times
in DB2. (DSPMENTX)

TOTAL WAIT TRACE EVENTS Number of entry and exit

events processed to calculate the
I/O, lock, and latch elapsed wait
times. (DSPWATTR)

AVERAGE WAIT TRACE Average number of entry and exit

EVENTS events processed to calculate the
I/O, lock, and latch elapsed wait
times. This average is
calculated as DSPWATTR/DB2NTRAN.

MAXIMUM WAIT/TRACE Maximum number of entry and exit

EVENTS events processed to calculate the
I/O, lock, and latch elapsed wait
times. (DSPMWATR)

Thread Status Section

NORMAL End of task, application program

END OF TASK terminated. (DSPNTEOT)

NORMAL End of task, application program

APPLICATION ENDED termination. (DSPNTEND)

NORMAL Deallocation, normal program

DEALLOCATION termination. (DSPNTDEL)

NORMAL New user, authorization ID

NEW USER changed. (DSPNTNUS)

COMMIT PHASE 2 COMMIT phase 2 successful

completion for IMS or CICS
environments. (DSPCOMM2)

ABNORMAL End of task, application program

APPLICATION ABENDED ABEND. (DSPABABD)

Chapter 3: REPORTS 107

3.1 Tabular Reports Overview

ABNORMAL End of memory, abnormal

END OF MEMORY termination. (DSPWUEOM)

ABNORMAL Resolve indoubt. (DSPABRIN)

RESOLVE INDOUBT

ABNORMAL STOP DB2 MODE (FORCE) command

FORCE COMMAND issued. (DSPABFRC)

ABORT REQUESTS Abort Plan activity request

count. (DSPABORT)

WORK UNIT IN DOUBT End of task, application program

APPLICATION ABENDED ABEND. (DSPWUABD)

WORK UNIT IN DOUBT End of memory, abnormal

END OF MEMORY termination. (DSPWUEOM)

WORK UNIT IN DOUBT Resolve indoubt. (DSPWURIN)

RESOLVE INDOUBT

WORK UNIT IN DOUBT STOP DB2 MODE (FORCE) command

FORCE COMMAND issued. (DSPWUFRC)

SQL Calls Section

SELECT Number of SELECT statements.

(DB2SELECT)

INSERT Number of INSERT statements.

(DSPINSRT)

UPDATE Number of UPDATE statements.

(DSPUPDTE)

DELETE Number of DELETE statements.

(DSPDELET)

DESCRIBE Number of DESCRIBE statements.

(DSPDESC)

PREPARE Number of PREPARE statements.

(DSPPREP)

OPEN Number of OPEN statements.

(DSPOPEN)

108 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

CLOSE Number of CLOSE statements.

(DSPCLOSE)

FETCH Number of FETCH statements.

(DSPFETCH)

LABEL Number of LABEL statements.

(DSPLABEL)

DESCRIBE TABLE Number of DESCRIBE TABLE

statements.
(DSPDSCRT)

LOCK TABLE Number of LOCK TABLE statements.

(DSPLOCK)

GRANT Number of GRANT statements.

(DSPGRANT)

REVOKE Number of REVOKE statements.

(DSPREVOK)

INCREMENTAL BIND Number of INCREMENTAL BINDs

excluding prepares. (DSPINCRB)

COMMENT Number of COMMENT ON statements.

(DSPCMTON)

SET SQLID Number of SET CURRENT SQLID

statements. (DSPSQLID)

SET HOST VARIABLE Number of SET HOST VARIABLE

statements. (DSPSETHV)

CREATE TABLE Number of CREATE TABLE

statements. (DSPCRTAB)

CREATE INDEX Number of CREATE INDEX

statements. (DSPCRINX)

CREATE TABLESPACE Number of CREATE TABLESPACE

statements. (DSPCTABS)

CREATE STOGROUP Number of CREATE STOGROUP

statements. (DSPCRSTG)

CREATE DATABASE Number of CREATE DATABASE

Chapter 3: REPORTS 109

3.1 Tabular Reports Overview

statements. (DSPCRDAB)

CREATE SYNONYM Number of CREATE SYNONYM

statements. (DSPCRSYN)

CREATE VIEW Number of CREATE VIEW statements.

(DSPDEFVU)

CREATE ALIAS Number of CREATE ALIAS

statements. (DSPCRAL)

DROP TABLE Number of DROP TABLE statements.

(DSPDRPTA)

DROP INDEX Number of DROP INDEX statements.

(DSPDRPIX)

DROP TABLESPACE Number of DROP TABLESPACE

statements. (DSPDRPTS)

DROP STOGROUP Number of DROP STOGROUP

statements. (DSPDRPST)

DROP DATABASE Number of DROP DATABASE

statements. (DSPDRPDB)

DROP SYNONYM Number of DROP SYNONYM

statements. (DSPDRPSY)

DROP VIEW Number of DROP VIEW statements.

(DSPDRPVU)

DROP ALIAS Number of DROP ALIAS statements.

(DSPDRAL)

DROP PACKAGE Number of DROP PACKAGE

statements. (DSPDRPKG)

ALTER TABLE Number of ALTER TABLE statements.

(DSPALTTA)

ALTER INDEX Number of ALTER INDEX statements.

(DSPALTIX)

ALTER TABLESPACE Number of ALTER TABLESPACE

statements. (DSPALTTS)

ALTER STOGROUP Number of ALTER STOGROUP

110 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

statements. (DSPALTST)

ALTER DATABASE Number of ALTER DATABASE

statements. (DSPALDAB)

Multiple Index Activity Section

MIX INDEX USED Number of times a multiple index

access path was used. (DSPMIXU)

MIX INDEX NOT USED Number of times multiple index

STORAGE LIMIT EXCEEDED access was not used because there
was not enough storage for RIDs.
(DSPMIXNU)

MIX INDEX NOT USED Number of times multiple index

RID LIMIT EXCEEDED access was not used because the
RID limit was exceeded.
(DSPMIXNL)

Locking Section

DEADLOCKS Total deadlock count for all

PLANs included in this summation.
(DSPDEAD)

AVERAGE Average deadlock count.

(AVGDEAD)

MAXIMUM Maximum deadlock count for any

PLAN in this summation.
(DSPMDEAD)

SUSPENSIONS Total suspension count for all

PLANs included in this summation.
(DSPSUSP)

AVERAGE Average suspend count. (AVGSUSP)

MAXIMUM Maximum suspend count for any

PLAN in this summation.
(DSPMSUSP)

TIMEOUTS Total Timeout count for all PLANs

included in this summation.
(DSPTIMO)

Chapter 3: REPORTS 111

3.1 Tabular Reports Overview

AVERAGE Average timeout count. (AVGTIMO)

MAXIMUM Maximum timeout count for any

PLAN in this summation.
(DSPMTIMO)

MAX. CONCUR. PAGELOCK Total maximum number of page

locks held by a DB2 user for all
PLANs included in this summation.
(DSPMXPL)

AVERAGE Average maximum-page-locks count.

(AVGMXPL)

MAXIMUM Maximum maximum-page-locks count

for any PLAN in this summation.
(DSPMMXPL)

LOCK/LATCH TIME Total Time spent waiting on IRLM

LOCKS or DB2 LATCHes for all
PLANs included in this summation.
(DSPALLTM)

AVERAGE Average LOCK/LATCH time.

(AVGLLTM)

MAXIMUM Maximum LOCK/LATCH time for any

PLAN in this summation.
(DSPMLLTM)

LATCH SUSPEND COUNT Total count of suspend requests

due to DB2 latch contention for
all PLANs included in this
summation. (DSPASLAT)

AVERAGE Average LATCH suspend request

count. (AVGSLAT)

MAXIMUM Maximum LATCH suspend requests

for any PLAN in this summation.
(DSPMSLAT)

OTHER SUSPEND COUNT Total count of suspend requests

for this for something other than
LATCH contention for all PLANs
included in this summation.
(DSPASOTH)

AVERAGE Average other suspend request

112 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

count. (AVGASOTH)

MAXIMUM Maximum other suspend requests

for any PLAN in this summation.
(DSPMSOTH)

ESCALATE TO SHARED Total number of lock escalations

to shared mode (DSPLESM) for all
PLANs included in this summation.
(DSPASOTH)

AVERAGE Average other suspend request

count. (AVGASOTH)

MAXIMUM Maximum other suspend requests

for any PLAN in this summation.
(DSPMSOTH)

ESCALATE TO EXCLUSIVE Total number of locks escalated

to exclusive mode for all PLANs
included in this summation.
(DSPLEEM)

AVERAGE Average count of locks escalated

to exclusive mode. (AVGLEEM)

MAXIMUM Maximum count of locks escalated

to exclusive mode for any PLAN in
this summation. (DSPMLEEM)

LOCK REQUEST COUNT Total IRLM lock requests for all

PLANs included in this summation.
(DSPALOCK)

AVERAGE Average lock requests count.

(AVGLOCK)

MAXIMUM Maximum count of lock requests

for any PLAN in this summation.
(DSPMLOCK)

QUERY REQUEST COUNT Total IRLM query requests for

lock status for all PLANs
included in this summation.
(DSPAQRY)

AVERAGE Average IRLM query requests

count. (AVGQRY)

Chapter 3: REPORTS 113

3.1 Tabular Reports Overview

MAXIMUM Maximum count of IRLM query

requests for any PLAN in this
summation. (DSPMQRY)

CHANGE LOCK REQUESTS Total IRLM change lock requests

for all PLANs included in this
summation. (DSPACHG)

AVERAGE Average IRLM change lock requests

count. (AVGACHG)

MAXIMUM Maximum count of IRLM change lock

requests for any PLAN in this
summation. (DSPMCHG)

IRLM LOCK REQUEST Total lock requests processed by

(OTHER) IRLM other than the DB2 LOCKS
already listed for all PLANs
included in this summation.
(DSPAIRLM)

AVERAGE Average IRLM other lock requests

count. (AVGAIRLM)

MAXIMUM Maximum count of IRLM other lock

requests for any PLAN in this
summation. (DSPMIRLM)

RESOURCE TABLE ID Table id of resource limit table

used to determine CPU limits for
dynamic PLAN execution.
(DSPARLID)

HOW LIMIT WAS DETERMINED Method resource limit was

determined. (LIMITFLG)

SERVICE UNIT TIME LIMIT Number of CPU services units

allowed per dynamic SQL requests.
(DSPASLMT)

CPU TIME LIMIT CPU time limit allowed per

dynamic SQL requests. (DSPACLMT)

HIGHEST CPU TIME USED Highest CPU time used for a

dynamic SQL statement. (DSPACHUS)

Buffer Manager Section

114 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

GETPAGE REQUESTS Total number of GETPAGE requests

for all PLANs included in this
TOTAL summation. (DSPSGPGR)

AVERAGE Average GETPAGE requests count.

(AVGSGPGR)

MAXIMUM Maximum GETPAGE requests for any

PLAN in this summation.
(DSPMSGPG)

RECORD IN SYSTEM Total number of records residing

PAGE UPDATED in a system page that were
updated for all PLANs included in
TOTAL this summation. (DSPSSPRU)

AVERAGE Average count of system page

updates. (AVGSSPRU)

MAXIMUM Maximum system page updates for

any PLAN in this summation.
(DSPMSSPU)

SYNCHRONOUS READ I/O Total number of synchronous read

I/Os for all PLANs included in
TOTAL this summation. (DSPSSRIO)

AVERAGE Average synchronous read I/O

count. (AVGSSRIO)

MAXIMUM Maximum synchronous read I/O

count for any PLAN in this
summation. (DSPMSSRD)

SYNCHRONOUS WRITE I/O Number of synchronous write I/Os

for all PLANs included in this
TOTAL summation. (DSPSCIMW)

AVERAGE Average synchronous write I/O

count. (AVGSCIMW)

MAXIMUM Maximum synchronous write I/O

count for any PLAN in this
summation. (DSPMSSWR)

SEQUENTIAL PREFETCH Total number of sequential

REQUESTS prefetch read requests for all
PLANs included in this summation.

Chapter 3: REPORTS 115

3.1 Tabular Reports Overview

(DSPSPRFH)

AVERAGE Average sequential prefetch read

request count. (AVGSPRFH)

MAXIMUM Maximum sequential prefetch read

request count for any PLAN in
this summation. (DSPMSPFR)

LIST PREFETCH REQUESTS Total number of list read

requests for all PLANs included
in this summation. (DSPSLPF)

AVERAGE Average list prefetch read

request count. (AVGSLPF)

MAXIMUM Maximum list prefetch read

request count for any PLAN in
this summation. (DSPMSLPF)

DYNAMIC PREFETCH Total number of Dynamic Prefetch

REQUESTS Requests for all active DB2
(V3.1 only) buffer pools. Dynamic prefetch
is the process that is triggered
because of sequential detection.
(DSPSDPF)

AVERAGE Average number of Dynamic

Prefetch Requests, summarized
across all active DB2 buffer
pools. (AVGSDPF)

MAXIMUM Maximum number of Dynamic

Prefetch Requests, summarized
across all active DB2 buffer
pools. (DSPMSDPF)

SUCCESSFUL HIPERPOOL Total number of successful

READS synchronous requests to move
(DB2 V3.1 only) pages from all active hiperpools
to all active virtual buffer
pools. (DSPSHRE)

AVERAGE Average number of successful

synchronous requests to move
pages from all active hiperpools
to all active virtual buffer
pools. (AVGSHRE)

116 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

MAXIMUM Maximum number of successful

synchronous requests to move
pages from all active hiperpools
to all active virtual buffer
pools. (DSPMSHRE)

UNSUCCESSFUL HIPERPOOL Total number of pages for which a

READS synchronous or asynchronous read
(DB2 V3.1 only) request failed because the
backing expanded storage page was
stolen by the system, summarized
for all active DB2 buffer pools.
(DSPSHRF)

AVERAGE Average number of pages for which

a synchronous or asynchronous
read request failed because the
backing expanded storage page was
stolen by the system, summarized
for all active DB2 buffer pools.
(AVGSHRF)

MAXIMUM Maximum number of pages for which

a synchronous or asynchronous
read request failed because the
backing expanded storage page was
stolen by the system, summarized
for all active DB2 buffer pools.
(DSPMSHRF)

SUCCESSFUL HIPERPOOL Total number of successful

WRITES requests to move a page from a
(DB2 V3.1 only) virtual buffer pool to a
hiperpool for all active DB2
buffer pools. (DSPSHWR)

AVERAGE Average number of successful

requests to move a page from a
virtual buffer pool to a
hiperpool for all active DB2
buffer pools. (AVGSHWR)

MAXIMUM Maximum number of successful

requests to move a page from a
virtual buffer pool to a
hiperpool for all active DB2
buffer pools. (DSPMSHWR)

UNSUCCESSFUL HIPERPOOL Total number of pages for which

Chapter 3: REPORTS 117

3.1 Tabular Reports Overview

WRITES a synchronous or asynchronous

(DB2 V3.1 only) write request failed because of a
shortage of expanded storage for
all active DB2 buffer pools.
(DSPSHWF)

AVERAGE Average number of pages for which

a synchronous or asynchronous
write request failed because of a
shortage of expanded storage for
all active DB2 buffer pools.
(AVGSHWR)

MAXIMUM Maximum number of pages for which

a synchronous or asynchronous
write request failed because of a
shortage of expanded storage for
all active DB2 buffer pools.
(DSPMSHWF)

UNSUCCESSFUL GET PAGE Total number of times conditional

OPERATIONS getpage requests could not be
(DB2 V3.1 only) satisfied for all active DB2
buffer pools. (DSPSNGT)

AVERAGE Average number of times

conditional getpage requests
could not be satisfied for all
active DB2 buffer pools.
(AVGSNGT)

MAXIMUM Maximum number of times

conditional getpage requests
could not be satisfied for all
active DB2 buffer pools.
(DSPMSNGT)

ASYNC PAGES READ BY Total number of synchronous read

PREFETCH I/Os issued by sequential access
(DB2 V3.1 only) requesters, summarized across all
active DB2 buffer pools.
(DSPSSIO)

AVERAGE Average number of synchronous

read I/Os issued by sequential
access requesters, summarized
across all active DB2 buffer
pools. (AVGSSIO)

118 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

MAXIMUM Maximum number of synchronous

read I/Os issued by sequential
access requesters, summarized
across all active DB2 buffer
pools. (DSPMSSIO)

PAGES MOVED FROM HPOOL Total number of pages moved from

TO VPOOL hiperpools to virtual buffer
(DB2 V3.1 only) pools due to prefetch that the
agent triggered for all active
DB2 buffer pools. (DSPSHPG)

AVERAGE Average number of pages moved

from hiperpools to virtual buffer
pools due to prefetch that the
agent triggered for all active
DB2 buffer pools. (AVGSHPG)

MAXIMUM Maximum number of pages moved

from hiperpools to virtual buffer
pools due to prefetch that the
agent triggered for all active
DB2 buffer pools. (DSPMSHPG)

DDF Performance Section

LOCATION Location Identifier for a Remote

DB2 Subsystem. (DB2RLOCN)

DDF THREADS Count of SMF 101 DDF Performance

segments included in this entry.
The second and third lines of
this column indicate average and
maximum reporting for each
location. (DDPNTHRD)

LOCAL ELAPSED Total time spent waiting at the

local DB2 for remote DB2
processing of a distributed
request. (DDPELPL)

REMOTE ELAPSED Total time spent processing

distributed request as measured
from the remote serving DB2
subsystem. (DDPELPR)

REMOTE CPU Total CPU time (SRB at remote

site) spent processing SQL
requests. (DDPCPUR)

Chapter 3: REPORTS 119

3.1 Tabular Reports Overview

CONV. VTAM Conversations Sent or

Received. Sent - (DDPCNVS),
Received - (DDPCNVR)

CONVERS. QUEUED VTAM Conversations Queued

(DDPCNVQ) to be sent to remote
site.

ABORTS (SENT/RECEIVED) Abort Messages Sent or Received.

Sent - (DDPABRS), Received -
(DDPABRR)

COMMITS (SENT/RECEIVED) COMMIT Messages Sent or Received.

Sent - (DDPCOMS), Received -
(DDPCOMR)

MESSAGES SENT TO VTAM Messages sent to the remote

site. (DDPMSGS)

MESSAGES RECEIVED FROM VTAM Messages received from the

remote site. (DDPMSGR)

SQL SENT/RECEIVED SQL Statements Sent or Received.

Sent - (DDPSQLS), Received -
(DDPSQLR)

DATA ROWS SENT Data rows sent to the remote

site. (DDPROWS)

DATA ROWS FROM Data rows received from the

remote site. (DDPROWR)

BYTES/1000 SENT TO Number of bytes sent to the

remote site (DDPROWS) divided by
1000. If the total byte count is
less than 10000 then the division
by 1000 is not performed and the
report variable is flagged.

BYTES/1000 RECEIVED Number of bytes received from

FROM remote (DDPROWR) divided by 1000.
If the total byte count is less
than 10000 then the division by
1000 is not performed and the
report variable is flagged.

Page End Section

120 Analyzer Option for DB2 Guide

3.1 Tabular Reports Overview

REPORTING PERIOD Earliest and latest dates and

times found within the data.

Chapter 3: REPORTS 121

Chapter 4: EXCEPTIONS
The exception reports provide a concise, integrated, and
itemized list of the problems affecting a data center's
effectiveness in terms of availability, service, workload,
standards, security, and performance for the different areas
of responsibility (for example, TSO, Batch, DB2).

This chapter describes the specific exceptions related to the

DB2 Analyzer. It lists the exceptions provided and explains
the exception definition process.

Refer to the CA MICS Standard Reports Guide for a full

description of the exception reporting process, including
the philosophy and requirement of exception reporting, a
general description of the process, the methodology for
qualifying exceptions, an explanation of the operational
flow, a description of the reports, and a plan for the use
of the reports.

This chapter consists of the following sections:

1 - Introduction To Exception Reporting

2 - Standard Exceptions For The DB2 Analyzer
3 - Exception Descriptions

This section contains the following topics:

4.1 Introduction To Exception Reporting (see page 124)
4.2 Standard Exceptions For The DB2 Analyzer (see page 127)
4.3 Exception Descriptions (see page 129)

Chapter 4: EXCEPTIONS 123

4.1 Introduction To Exception Reporting

The Exception Reporting process uses available monitoring
sources (for example, RMF, SMF, CA TSO/MON PM) to compare an
activity level against predefined thresholds and to provide
an integrated exception list of potential problem areas.

Figure 4-1 illustrates the operation of the exception reports

process. The database, Exception Test Routines, Standard
Exception Reports, and the Online Exception Inquiry are
standard parts of this process. User-defined values allow
you to tailor and modify the exceptions in order to uniquely
address your data center's requirements.

Figure 4-1. Exception Reporting Operational Flow

124 Analyzer Option for DB2 Guide

4.1 Introduction To Exception Reporting

On a daily basis, the appropriate files contained in the

database are processed to detect the defined exception
conditions. The Exception Analyzer performs this task by
using individual test routines to identify the exceptions.
Each test routine requires the necessary user-defined values
that tailor the exception test to your data center's
requirements.

An exception test completely defines the tests made to

determine the exception condition and the definitions that
define and classify the exception for reporting. You can
asily modify values or, in some cases, even add values to
adjust the exception criteria to better meet your data
center's requirements.

These tests are called Exception Test Routines, and they are
stored in the source library prefix.MICS.USER.SOURCE in the
member DYxxxEXC, where xxx represents the applicable
Information Area, such as DB2 for the DB2 Analyzer. An
exception group exists for each unique file that is to be
processed by the Exception Analyzer, and it consists of the
exceptions that are to be processed by using a specific
file.

Figure 4-2 lists the range of DB2 Analyzer Exception Numbers

that can be defined for each data group and file. The
exception code is organized sequentially by exception number
within the DYDB2EXC member, and it consists of standard
identification definitions (for example, severity level),
exception-dependent criteria (for example, amount of CPU time
used), or standard selection facilities (for example,
selection of prime-time hours only).

The exception to be modified may be located easily, since its

name and number delineate the beginning of its definition.
The value to be modified can then be located and changed
directly within the SAS code.

Chapter 4: EXCEPTIONS 125

4.1 Introduction To Exception Reporting

+----------------+-------------------------------------+
| Member Name | Descriptive Title |
+----------------+-------------------------------------+
| DYDB2EXC | Standard DB2 Exceptions |
+----------------+-------------------------------------+
| Exception | Database File Name |
| Number Range | |
+----------------+-------------------------------------+
| 10000-10049 | DETAIL.DB2DSY01 |
| 10050-10094 | DETAIL.DB2DSD01 |
| 10095-10106 | DETAIL.DB2DSY01 |
+----------------+-------------------------------------+

Figure 4-2. DB2 Exception Number Definition Table

126 Analyzer Option for DB2 Guide

4.2 Standard Exceptions For The DB2 Analyzer

The CA MICS DB2 Analyzer includes predefined exception
routines that can alert the data center staff of situations
affecting the operation of DB2. These routines can be
modified or deleted as needed. In addition, other exceptions
can be added.

This section lists the standard exceptions provided for the

DB2 Information Area. The exceptions are listed by their
exception number, and with their severity level, management
area code, and descriptive title.

The DB2 exceptions are listed in Figure 4-3.

Chapter 4: EXCEPTIONS 127

4.2 Standard Exceptions For The DB2 Analyzer

128 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

| 10070 | Warning | Performance | Read Pagefixed Without Real Storage B3 |

Figure 4-3. DB2 Exception List

4.3 Exception Descriptions

This section provides an in-depth description of each DB2
Standard Exception available in the exception report process.
The exceptions are organized by number, beginning with 10000.

The description format provides the title, number, and a

statement on the purpose, rationale, and definition for each
exception to give the user insight to the meaning and use of
the information. Finally, the actual statements are listed.

Chapter 4: EXCEPTIONS 129

4.3 Exception Descriptions

10000 Instrumentation Buffer Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a buffer error occurred

while DB2 was attempting to write an instrumentation record.

RATIONALE: Buffer errors indicate that the file created by

SMF, RES, GTF, or SRV may be defective.

DEFINITION: This exception is noted when the DSYBFER1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10000 */
/* TITLE: INSTRUMENTATION BUFFER ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYBFER1 GT 0 THEN DO;
EXCCODE='10000';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION BUFFER ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES1,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYBFER1,6.)
;
LINK HIT;
END;

130 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10001 Instrumentation Not Active Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the instrumentation

facility specified was not active when DB2 attempted to write
a record.

RATIONALE: When the specified instrumentation facility

destination is not active, DB2 system activity and billing
information is not captured.

DEFINITION: This exception is noted when the DSYNAER1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10001 */
/* TITLE: INSTRUMENTATION NOT ACTIVE ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYNAER1 GT 0 THEN DO;
EXCCODE='10001';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION NOT ACTIVE ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES1,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYNAER1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 131

4.3 Exception Descriptions

10002 Instrumentation Record Not Accepted

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a record prepared by DB2

for the specified instrumentation facility destination was
not accepted.

RATIONALE: This exception indicates an internal error in DB2

which prepared an SMF, RES, GTF, or SRV record with an
incorrect format. The data are being lost.

DEFINITION: This exception is noted when the DSYRCNA1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10002 */
/* TITLE: INSTRUMENTATION RECORD NOT ACCEPTED*/
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRCNA1 GT 0 THEN DO;
EXCCODE='10002';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION RECORD NOT ACCEPTED';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES1,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNA1,6.)
;
LINK HIT;
END;

132 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10003 Instrumentation Writer Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the selected

instrumentation facility failed while processing a DB2
request.

RATIONALE: Instrumentation facility failure results in loss

of DB2 system activity and accounting data.

DEFINITION: This exception is noted when the DSYWFAI1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10003 */
/* TITLE: INSTRUMENTATION WRITER FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYWFAI1 GT 0 THEN DO;
EXCCODE='10003';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION WRITER FAILURE';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES1,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYWFAI1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 133

4.3 Exception Descriptions

10004 Record Unsuccessfully Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility specified to write a DB2 record.

RATIONALE: Incorrect operation of the instrumentation

facility SMF, RES, GTF, or SRV causes the loss of DB2 system
activity and accounting data.

DEFINITION: This exception is noted when the DSYRECN1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10004 */
/* TITLE: RECORD UNSUCCESSFULLY WRITTEN */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRECN1 GT 0 THEN DO;
EXCCODE='10004';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='RECORD UNSUCCESSFULLY WRITTEN';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES1,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRECN1,6.)
;
LINK HIT;
END;

134 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10005 System IFCID Record Not Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that an IFCID record was not

written.

RATIONALE:

DEFINITION: This exception is noted when the DSYIFCNS flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10005 */
/* TITLE: IFCID RECORD NOT WRITTEN SYSTEM */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYIFCNS GT 0 THEN DO;

EXCCODE='10005';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID RECORD NOT WRITTEN SYSTEM';
EXCDESC2='DESTINATION = ' ||
' SYSTEM' ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYIFCNS,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 135

4.3 Exception Descriptions

10006 System IFCID Record Not Desired

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.USER.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable.

RATIONALE:

DEFINITION: This exception is noted when the DSYRCNDS flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10006 */
/* TITLE: IFCID RECORD NOT DESIRED SYSTEM */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYRCNDS GT 0 THEN DO;

EXCCODE='10006';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID RECORD NOT DESIRED SYSTEM';
EXCDESC2='DESTINATION = ' ||
' SYSTEM' ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNDS,6.)
;
LINK HIT;
END;

136 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10007 System IFCID Buffer Not Available

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.USER.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable due to a lack of buffers.

RATIONALE:

DEFINITION: This exception is noted when the DSYBNAS flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10007 */
/* TITLE: IFCID BUFFER NOT AVAILABLE SYSTEM */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYBNAS GT 0 THEN DO;

EXCCODE='10007';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID BUFFER NOT AVAILABLE SYSTEM';
EXCDESC2='DESTINATION = ' ||
' SYSTEM' ||
' ' ||
'COUNT = ' ||
PUT(DSYBNAS,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 137

4.3 Exception Descriptions

10008 System IFCID Collection Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.USER.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable due to a collection
failure.

RATIONALE:

DEFINITION: This exception is noted when the DSYCOLFS flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10008 */
/* TITLE: IFCID COLLECTION FAILURE SYSTEM */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYCOLFS GT O THEN DO;

EXCCODE='10008';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID COLLECTION FAILURE SYSTEM';
EXCDESC2='DESTINATION = ' ||
' SYSTEM' ||
' ' ||
'COUNT = ' ||
PUT(DSYCOLFS,6.)
;
LINK HIT;
END;

138 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10009 Data Base IFCID Record Not Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.USER.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable.

RATIONALE:

DEFINITION: This exception is noted when the DSYIFCND flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10009 */
/* TITLE: IFCID RECORD NOT WRITTEN DATA BASE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYIFCND GT 0 THEN DO;

EXCCODE='10009';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID RECORD NOT WRITTEN DATA BASE';
EXCDESC2='DESTINATION = ' ||
' DATA BASE' ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYIFCND,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 139

4.3 Exception Descriptions

10010 Data Base IFCID Record Not Desired

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable because a record was not
desired.

RATIONALE:

DEFINITION: This exception is noted when the DSYRCNDD flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10010 */
/* TITLE: IFCID RECORD NOT DESIRED DATA BASE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYRCNDD GT 0 THEN DO;

EXCCODE='10010';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID RECORD NOT DESIRED DATA BASE';
EXCDESC2='DESTINATION = ' ||
' DATA BASE' ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNDD,6.)
;
LINK HIT;
END;

140 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10011 Data Base IFCID Buffer Not Available

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable because an output buffer
was not available.

RATIONALE:

DEFINITION: This exception is noted when the DSYBNAD flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ****************************************** */
/* EXCEPTION NUMBER: 10011 */
/* TITLE: IFCID BUFFER NOT AVAILABLE DATA BASE*/
/* FILE: DB2DSY01 */
/* ****************************************** */

IF DSYBNAD GT 0 THEN DO;

EXCCODE='10011';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID BUFFER NOT AVAILABLE DATA BASE';
EXCDESC2='DESTINATION = ' ||
' DATA BASE' ||
' ' ||
'COUNT = ' ||
PUT(DSYBNAD,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 141

4.3 Exception Descriptions

10012 Data Base IFCID Collection Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record is not processable because of a collection
failure.

RATIONALE:

DEFINITION: This exception is noted when the DSYCOLFD flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10012 */
/* TITLE: IFCID COLLECTION FAILURE DATA BASE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYCOLFD GT O THEN DO;

EXCCODE='10012';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID COLLECTION FAILURE DATA BASE';
EXCDESC2='DESTINATION = ' ||
' DATA BASE' ||
' ' ||
'COUNT = ' ||
PUT(DSYCOLFD,6.)
;
LINK HIT;
END;

142 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10013 User IFCID Record Not Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record failed.

RATIONALE:

DEFINITION: This exception is noted when the DSYIFCNU flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10013 */
/* TITLE: IFCID RECORD NOT WRITTEN USER */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYIFCNU GT 0 THEN DO;

EXCCODE='10013';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID RECORD NOT WRITTEN USER';
EXCDESC2='DESTINATION = ' ||
' USER' ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYIFCNU,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 143

4.3 Exception Descriptions

10014 User IFCID Record Not Desired

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record failed because the record was not desired.

RATIONALE:

DEFINITION: This exception is noted when the DSYRCNDU flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10014 */
/* TITLE: IFCID RECORD NOT DESIRED USER */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYRCNDU GT 0 THEN DO;

EXCCODE='10014';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID RECORD NOT DESIRED USER';
EXCDESC2='DESTINATION = ' ||
' USER' ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNDU,6.)
;
LINK HIT;
END;

144 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10015 User IFCID Buffer Not Available

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record failed because an output buffer was not
available.

RATIONALE:

DEFINITION: This exception is noted when the DSYBNAU flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10015 */
/* TITLE: IFCID BUFFER NOT AVAILABLE USER */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYBNAU GT 0 THEN DO;

EXCCODE='10015';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID BUFFER NOT AVAILABLE USER';
EXCDESC2='DESTINATION = ' ||
' USER' ||
' ' ||
'COUNT = ' ||
PUT(DSYBNAU,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 145

4.3 Exception Descriptions

10016 User IFCID Collection Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the DB2 request to write

an IFCID record failed because an output buffer was not
available.

RATIONALE:

DEFINITION: This exception is noted when the DSYCOLFU flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10016 */
/* TITLE: IFCID COLLECTION FAILURE USER */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYCOLFU GT O THEN DO;

EXCCODE='10016';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='IFCID COLLECTION FAILURE USER';
EXCDESC2='DESTINATION = ' ||
' USER' ||
' ' ||
'COUNT = ' ||
PUT(DSYCOLFU,6.)
;
LINK HIT;
END;

146 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10017 Successful Abort

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Productivity (MGMTAREA='Productivity')

PURPOSE: This exception warns that a unit of recovery was

backed out. Possible reasons are an application program
abend, an application deadlocked on data base records, or the
application program was canceled by the operator.

RATIONALE: It is important that application program failures

be noted because of the effect on application productivity.

DEFINITION: This exception is noted when the DSYABORT flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10017 */
/* TITLE: SUCCESSFUL ABORT */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYABORT GT 0 THEN DO;

EXCCODE='10017';
SEVERITY='W';
MGMTAREA='PRODUCTIVITY';
EXCDESC1='SUCCESSFUL ABORT';
EXCDESC2='COUNT = ' ||
PUT(DSYABORT,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 147

4.3 Exception Descriptions

10018 Indoubt Thread

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Productivity (MGMTAREA='Productivity')

PURPOSE: This exception warns that an application failure

has occurred after a successful prepare but before a
successful commit. The failure can occur in the address
space of the application, the transaction manager, DB2, or
all of these.

RATIONALE: It is important that application program failures

be noted because of the effect on application productivity.
It also may indicate an internal problem with DB2.

DEFINITION: This exception is noted when the DSYINDBT flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10018 */
/* TITLE: INDOUBT THREAD */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYINDBT GT 0 THEN DO;

EXCCODE='10018';
SEVERITY='W';
MGMTAREA='PRODUCTIVITY';
EXCDESC1='INDOUBT THREAD';
EXCDESC2='COUNT = ' ||
PUT(DSYINDBT,6.)
;
LINK HIT;
END;

148 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10019 End Of Task Abend

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Productivity (MGMTAREA='Productivity')

PURPOSE: This exception warns that a non-DB2 task abended

while connected to DB2.

RATIONALE: It is important that application program failures

be noted because of the effect on application productivity.

DEFINITION: This exception is noted when the DSYEOTSK flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10019 */
/* TITLE: END OF TASK ABEND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYEOTSK GT 0 THEN DO;

EXCCODE='10019';
SEVERITY='W';
MGMTAREA='PRODUCTIVITY';
EXCDESC1='END OF TASK ABEND';
EXCDESC2='COUNT = ' ||
PUT(DSYEOTSK,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 149

4.3 Exception Descriptions

10020 End Of Memory

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Productivity (MGMTAREA='Productivity')

PURPOSE: This exception warns that a non_DB2 address space

was deleted by the operating system while it was connected to
DB2.

RATIONALE: It is important that application program failures

be noted because of the effect on application productivity.

DEFINITION: This exception is noted when the DSYEOMEM flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10020 */
/* TITLE: END OF MEMORY */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYEOMEM GT 0 THEN DO;

EXCCODE='10020';
SEVERITY='W';
MGMTAREA='PRODUCTIVITY';
EXCDESC1='END OF MEMORY';
EXCDESC2='COUNT = ' ||
PUT(DSYEOMEM,6.)
;
LINK HIT;
END;

150 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10021 Start Data Base Command

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Start Data Base Command

was issued.

RATIONALE: Noting the user starting the data base is

important for security while the number of data bases active
may impact performance.

DEFINITION: This exception is noted when the DSYSTDBA flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10021 */
/* TITLE: START DATA BASE COMMAND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSTDBA GT 0 THEN DO;

EXCCODE='10021';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='START DATA BASE COMMAND';
EXCDESC2='COUNT = ' ||
PUT(DSYSTDBA,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 151

4.3 Exception Descriptions

10022 Start Trace Command

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Start Trace Command was

issued.

RATIONALE: The trace function consumes extra machine

resources and impacts performance. It is important to
control the use of this facility.

DEFINITION: This exception is noted when the DSYSTTRC flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10022 */
/* TITLE: START TRACE COMMAND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSTTRC GT 0 THEN DO;

EXCCODE='10022';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='START TRACE COMMAND';
EXCDESC2='COUNT = ' ||
PUT(DSYSTTRC,6.)
;
LINK HIT;
END;

152 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10023 Start DB2 Command

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Start DB2 command was

issued.

RATIONALE: It is important to note when DB2 was started and

stopped for availability and performance purposes.

DEFINITION: This exception is noted when the DSYSTDB2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10023 */
/* TITLE: START DB2 COMMAND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSTDB2 GT 0 THEN DO;

EXCCODE='10023';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='START DB2 COMMAND';
EXCDESC2='COUNT = ' ||
PUT(DSYSTDB2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 153

4.3 Exception Descriptions

10024 Stop Data Base Command

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Stop Data Base command

was issued.

RATIONALE: It is important to note a stop data base command

for availability and performance considerations.

DEFINITION: This exception is noted when the DSYSPDBA flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10024 */
/* TITLE: STOP DATA BASE COMMAND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSPDBA GT 0 THEN DO;

EXCCODE='10024';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STOP DATA BASE COMMAND';
EXCDESC2='COUNT = ' ||
PUT(DSYSPDBA,6.)
;
LINK HIT;
END;

154 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10025 Stop Trace Command

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Stop Trace command was

issued.

RATIONALE: The trace facility consumes system resources and

impacts response. It is important to note which users are
activating this feature and for what period of time.

DEFINITION: This exception is noted when the DSYSPTRC flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10025 */
/* TITLE: STOP TRACE COMMAND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSPTRC GT 0 THEN DO;

EXCCODE='10025';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STOP TRACE COMMAND';
EXCDESC2='COUNT = ' ||
PUT(DSYSPTRC,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 155

4.3 Exception Descriptions

10026 Stop DB2 Command

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Stop DB2 command was

issued.

RATIONALE: It is important to availability and performance

to note when the DB2 subsystem is available.

DEFINITION: This exception is noted when the DSYSPDB2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10026 */
/* TITLE: STOP DB2 COMMAND */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSPDB2 GT 0 THEN DO;

EXCCODE='10026';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STOP DB2 COMMAND';
EXCDESC2='COUNT = ' ||
PUT(DSYSPDB2,6.)
;
LINK HIT;
END;

156 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10027 Unavailable Resource Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a plan has been requested

but the plan is unavailable. For example, it could have been
invalidated and an unsuccessful automatic bind has occurred.

RATIONALE: An unavailable resource failure indicates a major

problem in accessing data. Immediate steps should be taken
to determine why the bind could not complete successfully.

DEFINITION: This exception is noted when the DSYUNAVL flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10027 */
/* TITLE: UNAVAILABLE RESOURCE FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYUNAVL GT 0 THEN DO;

EXCCODE='10027';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='UNAVAILABLE RESOURCE FAILURE';
EXCDESC2='COUNT = ' ||
PUT(DSYUNAVL,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 157

4.3 Exception Descriptions

10028 Allocation Deadlock Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that an allocation deadlock

has occurred. This can happen when resources are limited and
contention is high. An example is a table space lock that
cannot be acquired because it is locked by another
application.

RATIONALE: With this information it is possible to change

allocation, design, and other factors to minimize deadlocks.

DEFINITION: This exception is noted when the DSYALOCD flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10028 */
/* TITLE: ALLOCATION DEADLOCK FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYALOCD GT 0 THEN DO;

EXCCODE='10028';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='ALLOCATION DEADLOCK FAILURE';
EXCDESC2='COUNT = ' ||
PUT(DSYALOCD,6.)
;
LINK HIT;
END;

158 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10029 Invalid Resource Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a request for allocation

of a plan that was unknown to DB2.

RATIONALE: It is important to determine why the plan was not

available to DB2.

DEFINITION: This exception is noted when the DSYINVAL flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10029 */
/* TITLE: INVALID RESOURCE FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYINVAL GT 0 THEN DO;

EXCCODE='10029';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='INVALID RESOURCE FAILURE';
EXCDESC2='COUNT = ' ||
PUT(DSYINVAL,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 159

4.3 Exception Descriptions

10030 Error Return from GETMAIN/FREEMAIN

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a GETMAIN or FREEMAIN

request had a return code that was not 0.

RATIONALE:

DEFINITION: This exception is noted when the DSYNZGFM flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10030 */
/* TITLE: ERROR RETURN FROM GETMAIN/FREEMAIN */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYNZGFM GT 0 THEN DO;

EXCCODE='10030';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='ERROR RETURN FROM GETMAIN/FREEMAIN';
EXCDESC2='COUNT = ' ||
PUT(DSYNZGFM,6.)
;
LINK HIT;
END;

160 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10031 Short On Storage Contractions

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a storage contraction

occurred because DB2 was short on storage.

RATIONALE: Storage shortages impact the performance of DB2.

DEFINITION: This exception is noted when the DSYCONTR flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10031 */
/* TITLE: SHORT ON STORAGE CONTRACTIONS */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYCONTR GT 0 THEN DO;

EXCCODE='10031';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='SHORT ON STORAGE CONTRACTIONS';
EXCDESC2='COUNT = ' ||
PUT(DSYCONTR,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 161

4.3 Exception Descriptions

10032 Short On Storage Detected

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a storage shortage

situation was detected.

RATIONALE: Storage shortages impact the performance of DB2.

DEFINITION: This exception is noted when the DSYSTOSH flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10032 */
/* TITLE: SHORTAGE OF STORAGE */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSTOSH GT 0 THEN DO;

EXCCODE='10032';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='SHORTAGE OF STORAGE';
EXCDESC2='COUNT = ' ||
PUT(DSYSTOSH,6.)
;
LINK HIT;
END;

162 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10033 Short On Storage Abend

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that an abend due to a

shortage of storage was detected.

RATIONALE: Storage shortages impact the performance of DB2.

Abends impact the productivity and availability of
applications systems.

DEFINITION: This exception is noted when the DSYSTOSA flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10033 */
/* TITLE: SHORTAGE OF STORAGE ABENDS */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYSTOSA GT 0 THEN DO;

EXCCODE='10033';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='SHORTAGE OF STORAGE ABENDS';
EXCDESC2='COUNT = ' ||
PUT(DSYSTOSA,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 163

4.3 Exception Descriptions

10040 Reads Delayed Archive Allocation

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that reads were delayed

because the archived allocation limit was reached.

RATIONALE:

DEFINITION: This exception is noted when the DSYRDAA flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10040 */
/* TITLE: READS DELAYED ARCHIVE ALLOCATION */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYRDAA GT 0 THEN DO;

EXCCODE='10040';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='READS DELAYED ARCHIVE ALLOCATION';
EXCDESC2='COUNT = ' ||
PUT(DSYRDAA,6.)
;
LINK HIT;
END;

164 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10041 ICF Checkpoints Taken

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception tracks the number of checkpoints

taken by the DB2 system.

RATIONALE: Because each checkpoint taken will correspond to

a system record write, it is important to keep track of the
number of checkpoints due to the resources required to write
system statistics.

DEFINITION: This exception is noted when the DSYNCKPT flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements that identify the

exception situation and describe the condition are stored in
the source member named in SOURCE LOCATION and are described
below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10041 */
/* TITLE: IFC CHECKPOINTS TAKEN */
/* FILE: DB2DSY01 */
/* ***************************************** */

IF DSYNCKPT GT 0 THEN DO;

EXCCODE='10041';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='IFC CHECKPOINTS TAKEN';
EXCDESC2='COUNT = ' ||
PUT(DSYNCKPT,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 165

4.3 Exception Descriptions

10042 Instrumentation Buffer Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a buffer error occurred

while DB2 was attempting to write an instrumentation record.

RATIONALE: Buffer errors indicate that the file created by

SMF, GTF, RES, or SRV may be defective.

DEFINITION: This exception is noted when the DSYBFER2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10042 */
/* TITLE: INSTRUMENTATION BUFFER ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYBFER2 GT 0 THEN DO;
EXCCODE='10042';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION BUFFER ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES2,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYBFER2,6.)
;
LINK HIT;
END;

166 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10043 Instrumentation Buffer Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a buffer error occurred

while DB2 was attempting to write an instrumentation record.

RATIONALE: Buffer errors indicate that the file created by

SMF, GTF, RES, or SRV may be defective.

DEFINITION: This exception is noted when the DSYBFER3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10043 */
/* TITLE: INSTRUMENTATION BUFFER ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYBFER3 GT 0 THEN DO;
EXCCODE='10043';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION BUFFER ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES3,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYBFER3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 167

4.3 Exception Descriptions

10044 Instrumentation Buffer Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a buffer error occurred

while DB2 was attempting to write an instrumentation record.

RATIONALE: Buffer errors indicate that the file created by

SMF, GTF, RES, or SRV may be defective.

DEFINITION: This exception is noted when the DSYBFER4 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10044 */
/* TITLE: INSTRUMENTATION BUFFER ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYBFER4 GT 0 THEN DO;
EXCCODE='10044';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION BUFFER ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES4,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYBFER4,6.)
;
LINK HIT;
END;

168 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10045 Instrumentation Buffer Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a buffer error occurred

while DB2 was attempting to write an instrumentation record.

RATIONALE: Buffer errors indicate that the file created by

SMF, GTF, RES, or SRV may be defective.

DEFINITION: This exception is noted when the DSYBFER5 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10045 */
/* TITLE: INSTRUMENTATION BUFFER ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYBFER5 GT 0 THEN DO;
EXCCODE='10045';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION BUFFER ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES5,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYBFER5,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 169

4.3 Exception Descriptions

10046 Instrumentation Not Active Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility was not active when DB2 attempted to
write a record.

RATIONALE: When the specified instrumentation facility

destination is not active, DB2 system activity and billing
information is not captured.

DEFINITION: This exception is noted when the DSYNAER2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10046 */
/* TITLE: INSTRUMENTATION NOT ACTIVE ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYNAER2 GT 0 THEN DO;
EXCCODE='10046';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION NOT ACTIVE ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES2,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYNAER2,6.)
;
LINK HIT;
END;

170 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10047 Instrumentation Not Active Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility was not active when DB2 attempted to
write a record.

RATIONALE: When the specified instrumentation facility

destination is not active, DB2 system activity and billing
information is not captured.

DEFINITION: This exception is noted when the DSYNAER3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10047 */
/* TITLE: INSTRUMENTATION NOT ACTIVE ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYNAER3 GT 0 THEN DO
EXCCODE='10047';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION NOT ACTIVE ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES3,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYNAER3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 171

4.3 Exception Descriptions

10048 Instrumentation Not Active Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility was not active when DB2 attempted to
write a record.

RATIONALE: When the specified instrumentation facility

destination is not active, DB2 system activity and billing
information is not captured.

DEFINITION: This exception is noted when the DSYNAER4 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10048 */
/* TITLE: INSTRUMENTATION NOT ACTIVE ERROR */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYNAER4 GT 0 THEN DO
EXCCODE='10048';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION NOT ACTIVE ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES4,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYNAER4,6.)
;
LINK HIT;
END;

172 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10049 Instrumentation Not Active Error

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility was not active when DB2 attempted to
write a record.

RATIONALE: When the specified instrumentation facility

destination is not active, DB2 system activity and billing
information is not captured.

DEFINITION: This exception is noted when the DSYNAER5 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10049 */
/* TITLE: INSTRUMENTATION NOT ACTIVE ERROR */
/* FILE: DB2DSY01 */
/********************************************/
IF DSYNAER5 GT 0 THEN DO
EXCCODE='10049';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION NOT ACTIVE ERROR';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES5,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYNAER5,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 173

4.3 Exception Descriptions

10050 Create Tablespace Statement

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Create Tablespace

statement was executed.

RATIONALE: Creating a Tablespace may use large amounts of

DASD storage.

DEFINITION: This exception is noted when the DSDCTABS flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10050 */
/* TITLE: CREATE TABLESPACE STATEMENT */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDCTABS GT 0 THEN DO;

EXCCODE='10050';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='CREATE TABLESPACE STATEMENT';
EXCDESC2='COUNT = ' ||
PUT(DSDCTABS,6.)
;
LINK HIT;
END;

174 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10051 Create Data Base Statement

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Create Data Base

statement was executed.

RATIONALE: Creating a Data Base may use large amounts of

DASD storage.

DEFINITION: This exception is noted when the DSDCRDAB flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10051 */
/* TITLE: CREATE DATA BASE STATEMENT */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDCRDAB GT 0 THEN DO;

EXCCODE='10051';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='CREATE DATA BASE STATEMENT';
EXCDESC2='COUNT = ' ||
PUT(DSDCRDAB,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 175

4.3 Exception Descriptions

10052 Drop Tablespace Statement

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Drop Tablespace

statement was executed.

RATIONALE: Dropping a Tablespace will delete all the tables

contained within the space.

DEFINITION: This exception is noted when the DSDDRPTS flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10052 */
/* TITLE: DROP TABLESPACE STATEMENT */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDDRPTS GT 0 THEN DO;

EXCCODE='10052';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='DROP TABLESPACE STATEMENT';
EXCDESC2='COUNT = ' ||
PUT(DSDDRPTS,6.)
;
LINK HIT;
END;

176 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10053 Drop Data Base Statement

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that a Drop Data Base

statement was executed.

RATIONALE: Dropping a Data Base will delete all the tables

contained within the space.

DEFINITION: This exception is noted when the DSDDRPDB flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10053 */
/* TITLE: DROP DATA BASE STATEMENT */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDDRPDB GT 0 THEN DO;

EXCCODE='10053';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='DROP DATA BASE STATEMENT';
EXCDESC2='COUNT = ' ||
PUT(DSDDRPDB,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 177

4.3 Exception Descriptions

10054 Allocate Requests A Nonexistent Plan

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception notes that the allocation of a

nonexistent plan has been requested.

RATIONALE: It is important to determine why the plan

requested did not exist.

DEFINITION: This exception is noted when the DSDNVRID flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10054 */
/* TITLE: ALLOCATE REQUESTS NONEXISTENT PLAN */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDNVRID GT 0 THEN DO;

EXCCODE='10054';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='ALLOCATE REQUESTS NONEXISTENT PLAN';
EXCDESC2='COUNT = ' ||
PUT(DSDNVRID,6.)
;
LINK HIT;
END;

178 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10055 Binds Without Plan ID

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a bind has been requested

but a plan ID was not supplied.

RATIONALE: It is important to determine why the requested

plan ID was not supplied. This is normal when testing a plan
with no intention of saving it.

DEFINITION: This exception is noted when the DSDTESTB flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10055 */
/* TITLE: BINDS WITHOUT PLAN ID */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDTESTB GT 0 THEN DO;

EXCCODE='10055';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='BINDS WITHOUT PLAN ID';
EXCDESC2='COUNT = ' ||
PUT(DSDTESTB,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 179

4.3 Exception Descriptions

10057 Storage Shortage Expansion Failure - Pool 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer pool expansion

was necessary but the pool could not be expanded because of a
shortage of virtual storage. To correct this, check data
base services virtual storage for areas that can be reduced,
i.e. other buffer pools.

RATIONALE: This information can help to determine the

appropriate allocation of virtual storage to DB2 buffers.

DEFINITION: This exception is noted when the DSDSSEF0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10057 */
/* TITLE: STORAGE SHORTAGE EXPANSION FAILURE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDSSEF0 GT 0 THEN DO;

EXCCODE='10057';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STORAGE SHORTAGE EXPANSION FAILURE';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSSEF0,6.)
;
LINK HIT;
END;

180 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10059 Storage Shortage Expansion Failure – Pool 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer pool expansion

RATIONALE: This information can help to determine the

appropriate allocation of virtual storage to DB2 buffers.

DEFINITION: This exception is noted when the DSDSSEF1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10059 */
/* TITLE: STORAGE SHORTAGE EXPANSION FAILURE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDSSEF1 GT 0 THEN DO;

EXCCODE='10059';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STORAGE SHORTAGE EXPANSION FAILURE';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSSEF1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 181

4.3 Exception Descriptions

10061 Storage Shortage Expansion Failure - Pool 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.USER.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer pool expansion

RATIONALE: This information can help to determine the

appropriate allocation of virtual storage to DB2 buffers.

DEFINITION: This exception is noted when the DSDSSEF2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10061 */
/* TITLE: STORAGE SHORTAGE EXPANSION FAILURE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDSSEF2 GT 0 THEN DO;

EXCCODE='10061';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STORAGE SHORTAGE EXPANSION FAILURE';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSSEF2,6.)
;
LINK HIT;
END;

182 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10063 Storage Shortage Expansion Failure - Pool 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer pool expansion

RATIONALE: This information can help to determine the

appropriate allocation of virtual storage to DB2 buffers.

DEFINITION: This exception is noted when the DSDSSEF3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10063 */
/* TITLE: STORAGE SHORTAGE EXPANSION FAILURE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDSSEF3 GT 0 THEN DO;

EXCCODE='10063';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='STORAGE SHORTAGE EXPANSION FAILURE';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSSEF3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 183

4.3 Exception Descriptions

10064 Read Pagefixed Without Real Storage -Pool 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for read I/O does not have real storage frame backing.

RATIONALE: Read I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDRFXS0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10064 */
/* TITLE: READ PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDRFXS0 GT 0 THEN DO;

EXCCODE='10064';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='READ PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDRFXS0,6.)
;
LINK HIT;
END;

184 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10065 Write Pagefixed Without Real Storage - Pool 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for write I/O does not have real storage frame backing.

RATIONALE: Write I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDWFXS0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10065 */
/* TITLE: WRITE PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDWFXS0 GT 0 THEN DO;

EXCCODE='10065';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='WRITE PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWFXS0,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 185

4.3 Exception Descriptions

10066 Read Pagefixed Without Real Storage - Pool 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for read I/O does not have real storage frame backing.

RATIONALE: Read I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDRFXS1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10066 */
/* TITLE: READ PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDRFXS1 GT 0 THEN DO;

EXCCODE='10066';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='READ PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDRFXS1,6.)
;
LINK HIT;
END;

186 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10067 Write Pagefixed Without Real Storage - Pool 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for write I/O does not have real storage frame backing.

RATIONALE: Write I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDWFXS1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10067 */
/* TITLE: WRITE PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDWFXS1 GT 0 THEN DO;

EXCCODE='10067';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='WRITE PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWFXS1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 187

4.3 Exception Descriptions

10068 Read Pagefixed Without Real Storage - Pool 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for read I/O does not have real storage frame backing.

RATIONALE: Read I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDRFXS2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10068 */
/* TITLE: READ PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDRFXS2 GT 0 THEN DO;

EXCCODE='10068';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='READ PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDRFXS2,6.)
;
LINK HIT;
END;

188 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10069 Write Pagefixed Without Real Storage - Pool 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for write I/O does not have real storage frame backing.

RATIONALE: Write I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDWFXS2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10069 */
/* TITLE: WRITE PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDWFXS2 GT 0 THEN DO;

EXCCODE='10069';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='WRITE PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWFXS2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 189

4.3 Exception Descriptions

10070 Read Pagefixed Without Real Storage - Pool 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for read I/O does not have real storage frame backing.

RATIONALE: Read I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDRFXS3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10070 */
/* TITLE: READ PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDRFXS3 GT 0 THEN DO;

EXCCODE='10070';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='READ PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDRFXS3,6.)
;
LINK HIT;
END;

190 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10071 Write Pagefixed Without Real Storage - Pool 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception warns that a buffer being PAGEFIXed

for write I/O does not have real storage frame backing.

RATIONALE: Write I/O into a buffer not residing in real

storage increases the overhead of DB2.

DEFINITION: This exception is noted when the DSDWFXS3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10071 */
/* TITLE: WRITE PAGEFIXED W/O REAL STORAGE */
/* FILE: DB2DSD01 */
/* ***************************************** */

IF DSDWFXS3 GT 0 THEN DO;

EXCCODE='10071';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='WRITE PAGEFIXED W/O REAL STORAGE';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWFXS3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 191

4.3 Exception Descriptions

10072 NO. Lock Escalations to Exclusive Mode

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times that

DB2 automatically changed from page locking to table space
locking.

RATIONALE: Locking determines the level of concurrency which

can be maintained for a transaction. Since DB2 can change
the locking level specified by an application developer, it
is important to know how DB2 controls this capability.

DEFINITION: This exception is noted when the DSDLEEM flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ************************************************/
/* EXCEPTION NUMBER: 10072 */
/* TITLE: NO. LOCK ESCALATIONS TO EXCLUSIVE MODE */
/* FILE: DB2DSD01 */
/* ************************************************/

IF DSDLEEM GT 0 THEN DO;

EXCCODE='10072';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='LOCKS ESCALATED TO EXCLUSIVE MODE ' ||
'COUNT = ' ||
PUT(DSDLEEM,6.)
;
LINK HIT;
END;

192 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10073 Maximum Number of Page Locks Held

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the maximum number of page

locks held by an application for the system.

RATIONALE: This exception tracks page locks held by the

system.

DEFINITION: This exception is noted when the DSDMXPL flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ************************************************/
/* EXCEPTION NUMBER: 10073 */
/* TITLE: MAXIMUM PAGE LOCKS HELD */
/* FILE: DB2DSD01 */
/* ************************************************/

IF DSDMXPL GT 0 THEN DO;

EXCCODE='10073';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='MAXIMUM PAGE LOCKS HELD ' ||
'COUNT = ' ||
PUT(DSDMXPL,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 193

4.3 Exception Descriptions

10074 Prefetch Disabled No Read Engine Buffer 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch requests disabled because of an unavailable buffer
resource. In this case, the buffer resource comes from
buffer pool 0.

RATIONALE: This exception tracks the number of times buffer

pool 0 could not provide a buffer to perform a DB2 function.
It is very useful in determining number of buffers needed for
this pool.

DEFINITION: This exception is noted when the DSDSPDF0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10074 */
/* TITLE: PREFETCH REQUEST DISABLED DUE TO NO BUFFERS*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDSPDF0 GT 0 THEN DO;

EXCCODE='10074';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO BUFFERS';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSPDF0,6.)
;
LINK HIT;
END;

194 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10075 Prefetch Disabled No Read Engine Buffer 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch requests disabled because of an unavailable read
engine. In this case, buffer pool 0 could not get a read
engine.

RATIONALE: Because prefetch provides for improved

performance in situations requiring large amounts of
sequential processing, it is important to know when and why
this function could not be performed.

DEFINITION: This exception is noted when the DSDREEP0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *****************************************************/
/* EXCEPTION NUMBER: 10075 */
/* TITLE: PREFETCH REQUEST DISABLED DUE NO READ ENGINE */
/* FILE: DB2DSD01 */
/* *****************************************************/

IF DSDREEP0 GT 0 THEN DO;

EXCCODE='10075';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO READ ENGINES';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDREEP0,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 195

4.3 Exception Descriptions

10076 NO. Times Write Engine Unavailable Buffer 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times a write

engine was unavailable for I/O. In this case, buffer pool 0
could not get a read engine.

RATIONALE: This exception documents the situation when the

write function could not be performed due to no write engine
being available to the buffer pool.

DEFINITION: This exception is noted when the DSDWREE0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10076 */
/* TITLE: NO. TIMES WRITE ENGINE UNAVAILABLE */
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDWREE0 GT 0 THEN DO;

EXCCODE='10076';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WRITE ENGINE UNAVAILABLE';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWREE0,6.)
;
LINK HIT;
END;

196 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10077 NO. Times Deferred Write Threshold Buffer 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times the

deferred write threshold was reached for buffer pool 0.

RATIONALE: This exception tracks the deferred write

threshold reached for this buffer pool.

DEFINITION: This exception is noted when the DSDDWRT0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10077 */
/* TITLE: NO. TIMES DEFERRED WRITE THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDWRT0 GT 0 THEN DO;

EXCCODE='10077';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES DEFERRED WRITE THRESHOLD REACHED';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDWRT0,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 197

4.3 Exception Descriptions

10078 NO. Times WPHFWT Threshold Reached Buffer 0

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times that a

WPHFWT threshold was reached for buffer pool 0.

RATIONALE: This exception tracks the WPHFWT threshold for

buffer pool 0.

DEFINITION: This exception is noted when the DSDDMCT0 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10078 */
/* TITLE: NO. TIMES WPHFWT THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDMCT0 GT 0 THEN DO;

EXCCODE='10078';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WPHFWT THRESHOLD REACHED';
EXCDESC2='BUFFER 0 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDMCT0,6.)
;
LINK HIT;
END;

198 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10079 Prefetch Disabled No Read Engine Buffer 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch request disabled because of an unavailable buffer
resource. In this case, the buffer resource comes from
buffer pool 1.

RATIONALE: This exception tracks the number of times buffer

pool 1 could not provide a buffer to perform a DB2 function.
It will be very useful in determining number of buffers
needed for this pool.

DEFINITION: This exception is noted when the DSDSPDF1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10079 */
/* TITLE: PREFETCH REQUEST DISABLED DUE TO NO BUFFERS*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDSPDF1 GT 0 THEN DO;

EXCCODE='10079';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO BUFFERS';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSPDF1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 199

4.3 Exception Descriptions

10080 Prefetch Disabled No Read Engine Buffer 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch requests disabled because of an unavailable read
engine. In this case, buffer pool 1 could not get a read
engine.

RATIONALE: Because prefetch provides for improved

performance in situations requiring large amounts of
sequential processing, it is important to know when and why
this function could not be performed.

DEFINITION: This exception is noted when the DSDREEP1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10080 */
/* TITLE: PREFETCH REQUEST DISABLED DUE NO READ ENGINE*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDREEP1 GT 0 THEN DO;

EXCCODE='10080';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO READ ENGINES';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDREEP1,6.)
;
LINK HIT;
END;

200 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10081 NO. Times Write Engine Unavailable Buffer 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times a write

engine was unavailable for I/O, in this case, for buffer pool
1.

RATIONALE: This exception documents the situation of when

the write function could not be performed due to no write
engine being available to the buffer pool.

DEFINITION: This exception is noted when the DSDWREE1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10081 */
/* TITLE: NO. TIMES WRITE ENGINE UNAVAILABLE */
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDWREE1 GT 0 THEN DO;

EXCCODE='10081';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WRITE ENGINE UNAVAILABLE';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWREE1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 201

4.3 Exception Descriptions

10082 NO. Times Deferred Write Threshold Buffer 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times the

deferred write threshold was reached for buffer pool 1.

RATIONALE: This exception tracks the deferred write

threshold reached for this buffer pool.

DEFINITION: This exception is noted when the DSDDWRT1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10082 */
/* TITLE: NO. TIMES DEFERRED WRITE THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDWRT1 GT 0 THEN DO;

EXCCODE='10082';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES DEFERRED WRITE THRESHOLD REACHED';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDWRT1,6.)
;
LINK HIT;
END;

202 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10083 NO. Times WPHFWT Threshold Reached Buffer 1

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times that a

WPHFWT threshold was reached for buffer pool 1.

RATIONALE: This exception tracks the WPHFWT threshold for

buffer pool 1.

DEFINITION: This exception is noted when the DSDDMCT1 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10083 */
/* TITLE: NO. TIMES WPHFWT THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDMCT1 GT 0 THEN DO;

EXCCODE='10083';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WPHFWT THRESHOLD REACHED';
EXCDESC2='BUFFER 1 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDMCT1,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 203

4.3 Exception Descriptions

10084 Prefetch Disabled No Read Engine Buffer 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch requests disabled because of an unavailable buffer
resource. In this case, the buffer resource comes from
buffer pool 2.

RATIONALE: This exception tracks the number of times buffer

pool 2 could not provide a buffer to perform a DB2 function.
It is very useful in determining number of buffers needed for
this pool.

DEFINITION: This exception is noted when the DSDSPDF2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10084 */
/* TITLE: PREFETCH REQUEST DISABLED DUE TO NO BUFFERS*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDSPDF2 GT 0 THEN DO;

EXCCODE='10084';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO BUFFERS';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSPDF2,6.)
;
LINK HIT;
END;

204 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10085 Prefetch Disabled No Read Engine Buffer 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch requests disabled because of an unavailable read
engine. In this case, buffer pool 2 could not get a read
engine.

RATIONALE: Because prefetch provides for improved

performance in situations requiring large amounts of
sequential processing, it is important to know when and why
this function could not be performed.

DEFINITION: This exception is noted when the DSDREEP2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10085 */
/* TITLE: PREFETCH REQUEST DISABLED DUE NO READ ENGINE*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDREEP2 GT 0 THEN DO;

EXCCODE='10085';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO READ ENGINES';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDREEP2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 205

4.3 Exception Descriptions

10086 NO. Times Write Engine Unavailable Buffer 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times a write

engine was unavailable for I/O, in this case, for buffer pool
2.

RATIONALE: This exception documents the situation of when

the write function could not be performed due to no write
engine being available to the buffer pool.

DEFINITION: This exception is noted when the DSDWREE2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10086 */
/* TITLE: NO. TIMES WRITE ENGINE UNAVAILABLE */
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDWREE2 GT 0 THEN DO;

EXCCODE='10086';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WRITE ENGINE UNAVAILABLE';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWREE2,6.)
;
LINK HIT;
END;

206 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10087 NO. Times Deferred Write Threshold Buffer 2

FILE: DB2 Database Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times the

deferred write threshold was reached for buffer pool 2.

RATIONALE: This exception tracks the deferred write

threshold reached for this buffer pool.

DEFINITION: This exception is noted when the DSDDWRT2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements that identify the

exception situation and describe the condition are stored in
the source member named in SOURCE LOCATION and are described
below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10087 */
/* TITLE: NO. TIMES DEFERRED WRITE THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDWRT2 GT 0 THEN DO;

EXCCODE='10087';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES DEFERRED WRITE THRESHOLD REACHED';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDWRT2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 207

4.3 Exception Descriptions

10088 NO. Times WPHFWT Threshold Reached Buffer 2

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times that a

WPHFWT threshold was reached for buffer pool 2.

RATIONALE: This exception tracks the WPHFWT threshold for

buffer pool 2.

DEFINITION: This exception is noted when the DSDDMCT2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10088 */
/* TITLE: NO. TIMES WPHFWT THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDMCT2 GT 0 THEN DO;

EXCCODE='10088';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WPHFWT THRESHOLD REACHED';
EXCDESC2='BUFFER 2 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDMCT2,6.)
;
LINK HIT;
END;

208 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10089 Prefetch Disabled No Read Engine Buffer 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the the number of

sequential prefetch request disabled because of an
unavailable buffer resource. In this case, the buffer
resource comes from buffer pool 3.

RATIONALE: This exception tracks the number of times buffer

pool 0 could not provide a buffer to perform a DB2 function.
It will be very useful in determining number of buffers
needed for this pool.

DEFINITION: This exception is noted when the DSDSPDF3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10089 */
/* TITLE: PREFETCH REQUEST DISABLED DUE TO NO BUFFERS*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDSPDF3 GT 0 THEN DO;

EXCCODE='10089';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO BUFFERS';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDSPDF3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 209

4.3 Exception Descriptions

10090 Prefetch Disabled No Read Engine Buffer 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of sequential

prefetch requests disabled because of an unavailable read
engine. In this case, buffer pool 3 could not get a read
engine.

RATIONALE: Because prefetch provides for improved

performance for those situations requiring large amounts of
sequential processing, it is important to know when and why
this function could not be performed.

DEFINITION: This exception is noted when the DSDREEP3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10090 */
/* TITLE: PREFETCH REQUEST DISABLED DUE NO READ ENGINE*/
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDREEP3 GT 0 THEN DO;

EXCCODE='10090';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='PREFETCH REQUEST DISABLED NO READ ENGINES';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDREEP3,6.)
;
LINK HIT;
END;

210 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10091 NO. Times Write Engine Unavailable Buffer 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times a write

engine was unavailable for I/O, in this case, for buffer pool
3.

RATIONALE: This exception documents the situation when the

write function could not be performed due to not write engine
available to the buffer pool.

DEFINITION: This exception is noted when the DSDWREE3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************************/
/* EXCEPTION NUMBER: 10091 */
/* TITLE: NO. TIMES WRITE ENGINE UNAVAILABLE */
/* FILE: DB2DSD01 */
/* ***************************************************/

IF DSDWREE3 GT 0 THEN DO;

EXCCODE='10091';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WRITE ENGINE UNAVAILABLE';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDWREE3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 211

4.3 Exception Descriptions

10092 NO. Times Deferred Write Threshold Buffer 3

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times

deferred write threshold was reached for buffer pool 3.

RATIONALE: This exception tracks the deferred write

threshold reached for this buffer pool.

DEFINITION: This exception is noted when the DSDDWRT3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10092 */
/* TITLE: NO. TIMES DEFERRED WRITE THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDWRT3 GT 0 THEN DO;

EXCCODE='10092';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES DEFERRED WRITE THRESHOLD REACHED';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDWRT3,6.)
;
LINK HIT;
END;

212 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10093 NO. Times WPHFWT Threshold Reached Buffer 3

FILE: DB2 Database Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the number of times that a

WPHFWT threshold was reached for buffer pool 3.

RATIONALE: This exception tracks the WPHFWT threshold for

buffer pool 3.

DEFINITION: This exception is noted when the DSDDMCT3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements that identify the

exception situation and describe the condition are stored in
the source member named in SOURCE LOCATION and are described
below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10093 */
/* TITLE: NO. TIMES WPHFWT THRESHOLD REACHED */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDDMCT3 GT 0 THEN DO;

EXCCODE='10093';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. TIMES WPHFWT THRESHOLD REACHED';
EXCDESC2='BUFFER 3 ' ||
' ' ||
'COUNT = ' ||
PUT(DSDDMCT3,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 213

4.3 Exception Descriptions

10094 NO. Failures Due to Full EDM Pool

FILE: DB2 Data Base Activity File
SAS FILE NAME: DETAIL.DB2DSD01
SOURCE LOCATION: prefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Performance (MGMTAREA='Performance')

PURPOSE: This exception provides the transaction failures

due to the Environmental Descriptor Manager Pool being full.
There was not enough space in the pool to support the number
of transaction executions.

RATIONALE: This exceptions helps to track the problem

caused by an EDM pool which is not large enough for the
amount of work to be performed on the DB2 system.

DEFINITION: This exception is noted when the DSDEFAL flag is

non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* *********************************************************/
/* EXCEPTION NUMBER: 10094 */
/* TITLE: NO. OF FAILURES DUE TO FULL EDM POOL */
/* FILE: DB2DSD01 */
/* *********************************************************/

IF DSDEFAL GT 0 THEN DO;

EXCCODE='10094';
SEVERITY='W';
MGMTAREA='PERFORMANCE';
EXCDESC1='NO. OF FAILURES DUE TO FULL EDM POOL ' ||
'COUNT = ' ||
PUT(DSDEFAL,6.)
;
LINK HIT;
END;

214 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10095 Instrumentation Record Not Accepted

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a record prepared by DB2

for a specified instrumentation facility destination was not
accepted.

RATIONALE: This exception indicates an internal error in DB2

which prepared an SMF, GTF, RES, or SRV record with an
incorrect format. The data are being lost.

DEFINITION: This exception is noted when the DSYRCNA2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10095 */
/* TITLE: INSTRUMENTATION RECORD NOT ACCEPTED*/
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRCNA2 GT 0 THEN DO;
EXCCODE='10095';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION RECORD NOT ACCEPTED';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES2,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNA2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 215

4.3 Exception Descriptions

10096 Instrumentation Record Not Accepted

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a record prepared by DB2

for a specified instrumentation facility destination was not
accepted.

RATIONALE: This exception indicates an internal error in DB2

which prepared an SMF, GTF, RES, or SRV record with an
incorrect format. The data are being lost.

DEFINITION: This exception is noted when the DSYRCNA3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10096 */
/* TITLE: INSTRUMENTATION RECORD NOT ACCEPTED*/
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRCNA3 GT 0 THEN DO;
EXCCODE='10096';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION RECORD NOT ACCEPTED';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES3,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNA3,6.)
;
LINK HIT;
END;

216 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10097 Instrumentation Record Not Accepted

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a record prepared by DB2

for a specified instrumentation facility destination was not
accepted.

RATIONALE: This exception indicates an internal error in DB2

which prepared an SMF, GTF, RES, or SRV record with an
incorrect format. The data are being lost.

DEFINITION: This exception is noted when the DSYRCNA4 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10097 */
/* TITLE: INSTRUMENTATION RECORD NOT ACCEPTED*/
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRCNA4 GT 0 THEN DO;
EXCCODE='10097';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION RECORD NOT ACCEPTED';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES4,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNA4,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 217

4.3 Exception Descriptions

10098 Instrumentation Record Not Accepted

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that a record prepared by DB2

for a specified instrumentation facility destination was not
accepted.

RATIONALE: This exception indicates an internal error in DB2

which prepared an SMF, GTF, RES, or SRV record with an
incorrect format. The data are being lost.

DEFINITION: This exception is noted when the DSYRCNA5 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10098 */
/* TITLE: INSTRUMENTATION RECORD NOT ACCEPTED*/
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRCNA5 GT 0 THEN DO;
EXCCODE='10098';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION RECORD NOT ACCEPTED';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES5,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRCNA5,6.)
;
LINK HIT;
END;

218 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10099 Instrumentation Writer Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the instrumentation

facility selected failed while processing a DB2 request.

RATIONALE: Instrumentation facility failure results in the

loss of DB2 system activity and accounting data.

DEFINITION: This exception is noted when the DSYWFAI2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10099 */
/* TITLE: INSTRUMENTATION WRITER FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYWFAI2 GT 0 THEN DO;
EXCCODE='10099';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION WRITER FAILURE';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES2,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYWFAI2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 219

4.3 Exception Descriptions

10100 Instrumentation Writer Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the selected

instrumentation facility failed while processing a DB2
request.

RATIONALE: Instrumentation facility failure results in the

loss of DB2 system activity and accounting data.

DEFINITION: This exception is noted when the DSYWFAI3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10100 */
/* TITLE: INSTRUMENTATION WRITER FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYWFAI3 GT 0 THEN DO;
EXCCODE='10100';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION WRITER FAILURE';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES3,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYWFAI3,6.)
;
LINK HIT;
END;

220 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10101 Instrumentation Writer Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the selected

instrumentation facility failed while processing a DB2
request.

RATIONALE: Instrumentation facility failure results in the

loss of DB2 system activity and accounting data.

DEFINITION: This exception is noted when the DSYWFAI4 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10101 */
/* TITLE: INSTRUMENTATION WRITER FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYWFAI4 GT 0 THEN DO;
EXCCODE='10101';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION WRITER FAILURE';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES4,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYWFAI4,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 221

4.3 Exception Descriptions

10102 Instrumentation Writer Failure

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the selected

instrumentation facility failed while processing a DB2
request.

RATIONALE: Instrumentation facility failure results in the

loss of DB2 system activity and accounting data.

DEFINITION: This exception is noted when the DSYWFAI5 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10102 */
/* TITLE: INSTRUMENTATION WRITER FAILURE */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYWFAI5 GT 0 THEN DO;
EXCCODE='10102';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='INSTRUMENTATION WRITER FAILURE';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES5,$4.) ||
' ' ||
'COUNT = ' ||
PUT(DSYWFAI5,6.)
;
LINK HIT;
END;

222 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10103 Record Unsuccessfully Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility failed to write a DB2 record.

RATIONALE: Incorrect operation of the instrumentation

facility SMF, GTF, RES, or SRV causes the loss of DB2 system
activity and accounting data.

DEFINITION: This exception is noted when the DSYRECN2 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10103 */
/* TITLE: RECORD UNSUCCESSFULLY WRITTEN */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRECN2 GT 0 THEN DO;
EXCCODE='10103';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='RECORD UNSUCCESSFULLY WRITTEN';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES2,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRECN2,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 223

4.3 Exception Descriptions

10104 Record Unsuccessfully Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility failed to write a DB2 record.

RATIONALE: Incorrect operation of the instrumentation

facility SMF, GTF, RES, or SRV causes the loss of DB2 system
activity and accounting data.

DEFINITION: This exception is noted when the DSYRECN3 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10104 */
/* TITLE: RECORD UNSUCCESSFULLY WRITTEN */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRECN3 GT 0 THEN DO;
EXCCODE='10104';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='RECORD UNSUCCESSFULLY WRITTEN';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES3,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRECN3,6.)
;
LINK HIT;
END;

224 Analyzer Option for DB2 Guide

4.3 Exception Descriptions

10105 Record Unsuccessfully Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility failed to write a DB2 record.

RATIONALE: Incorrect operation of the instrumentation

facility SMF, GTF, RES, or SRV causes the loss of DB2 system
activity and accounting data.

DEFINITION: This exception is noted when the DSYRECN4 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10105 */
/* TITLE: RECORD UNSUCCESSFULLY WRITTEN */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRECN4 GT 0 THEN DO;
EXCCODE='10105';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='RECORD UNSUCCESSFULLY WRITTEN';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES4,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRECN4,6.)
;
LINK HIT;
END;

Chapter 4: EXCEPTIONS 225

4.3 Exception Descriptions

10106 Record Unsuccessfully Written

FILE: DB2 System Activity File
SAS FILE NAME: DETAIL.DB2DSY01
SOURCE LOCATION: sharedprefix.MICS.SOURCE(DB2DYEXC)

SEVERITY: Warning (Severity='W')

MANAGEMENT AREA: Security (MGMTAREA='Security')

PURPOSE: This exception warns that the specified

instrumentation facility failed to write a DB2 record.

RATIONALE: Incorrect operation of the instrumentation

facility SMF, GTF, RES, or SRV causes the loss of DB2 system
activity and accounting data.

DEFINITION: This exception is noted when the DSYRECN5 flag

is non-zero.

EXCEPTION STATEMENTS: The SAS statements identifying the

exception situation and describing the condition are stored
in the source member named in SOURCE LOCATION and are
described below:

/* ***************************************** */
/* EXCEPTION NUMBER: 10106 */
/* TITLE: RECORD UNSUCCESSFULLY WRITTEN */
/* FILE: DB2DSY01 */
/* ***************************************** */
IF DSYRECN5 GT 0 THEN DO;
EXCCODE='10106';
SEVERITY='W';
MGMTAREA='SECURITY';
EXCDESC1='RECORD UNSUCCESSFULLY WRITTEN';
EXCDESC2='DESTINATION = ' ||
PUT(DSYIDES5,$4.) ||
' ' ||
'RECORD COUNT = ' ||
PUT(DSYRECN5,6.)
;
LINK HIT;
END;

226 Analyzer Option for DB2 Guide

Chapter 5: FILES
This chapter describes the database files supported by the
DB2 Analyzer. The basic CA MICS Database design and details
about the specific files related to the DB2 Analyzer are
discussed in the following sections:

This section contains the following topics:

5.1 Introduction (see page 228)
5.2 DB2 System Activity (DB2DSY) File (see page 229)
5.3 DB2 Data Base Activity (DB2DSD) File (see page 242)
5.4 DB2 User Activity (DB2DSU) File (see page 257)
5.5 DB2 Plan Activity (DB2DSP) File (see page 268)
5.6 DB2 System Activity Suspend (DB2_DS) File (see page 279)
5.7 DB2 Data Base Activity Suspend (DB2_DD) File (see page 280)
5.8 DB2 System DDF Statistics (DB2DDY) File (see page 280)
5.9 DB2 User DDF Activity (DB2DDU) File (see page 287)
5.10 DB2 Plan DDF Activity (DB2DDP) File (see page 294)
5.11 DB2 System DDF Suspend (DB2_SH) File (see page 301)
5.12 DB2 Package/DBRM Activity (DB2DPP) File (see page 301)
5.13 DB2 Buffer Pool Activity (DBPDSB) File (see page 306)
5.14 DB2 User Buffer Pool Activity File (see page 313)
5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File (see page 318)
5.16 DB2 Buffer Pool Suspend (DBP_DB) File (see page 323)

Chapter 5: FILES 227

5.1 Introduction

5.1 Introduction
The database is physically organized using the extensive
SAS database management facilities. The resulting database
design consists of a related network of small, segmented SAS
files providing standard physical access to selected portions
of the stored data as well as the ability for relational data
retrieval. The major features of the database include:

o A single, common method for storing and retrieving

different data sources (for example, CA TSO/MON PM, RMF).

o Multi-level data summarization capability to maintain data

at the detail level as well as summarization to the daily,
weekly, monthly, and yearly levels.

o Multi-level database storage providing for online, archive

(offline), and backup storage of the data base.

o Efficient processing of large volumes of measurement data

to allow update of the database from multiple data
sources.

o Common online inquiry and batch reporting facilities to

access all data areas of the database.

o Segmentation of data into small, related SAS files that

minimize the amount of data to be traversed for the
majority of inquiry/reporting requirements.

o Data integrity validation to ensure the accuracy and

completeness of data maintained.

o Backup/recovery facilities to enable restoration of part

or all of the database.

o Special processing facilities to allow access to

information not available in the standard online and
offline database.

The database contains a number of features designed to

maximize your capability to quickly and easily use the
organized information. These include:

o Dictionary definitions that allow you to reference data

elements without first having to define their format. You
need not be concerned about data element attributes, which
saves valuable time in inquiry and program definition.

228 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

o Standardized file definitions that provide common

definitions for files in terms of data element labels,
content and format, regardless of where a particular file
may reside in the database. The file definition for TSO
system activity is always the same, regardless of whether
the request is for Detail, Daily or Monthly timespan
level.

o Common retrieval keys are defined in all files to simplify

your selection, merging and data manipulation operations.
These common keys include such standard elements as system
identification, date/time stamps, date, time, hour, day,
zone, and userids. This common key provision allows you to
easily integrate unlike data sources (for example, CA
TSO/MON PM and RMF).

o Derived data elements (for example, average response time)

are precalculated and maintained in the database to
minimize your access time to frequently-used elements.

o Data values are carried in decoded form (for example,

device type is 3350) rather than the typical encoded
pattern (for example, X'80') to improve data usability and
reduce the required analysis time.

5.2 DB2 System Activity (DB2DSY) File

FILENAME=DB2DSYxx

The DB2 System Activity file maintains DB2 System Activity

data, including address space, instrumentation, subsystem
services, commands, latch manager, agent services, storage
manager, trace data, and log manager data. This file is
derived from the SMF DB2 record type 100 subtype 0. This
file exists in the DETAIL, DAYS, WEEKS, MONTHS, and YEARS
timespans.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Elements List
3 - Usage Considerations

Chapter 5: FILES 229

5.2 DB2 System Activity (DB2DSY) File

5.2.1 File Organization

The table below identifies data elements by which the file is
sequenced and summarized in each time-span. "N/A" indicates
that the file is not supported in a time-span. At the DETAIL
level, data is sequenced but not summarized.

NOTE: The time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS system
at your installation.

NOTE: This file was generated with ESSENTIAL=ALL

option in effect. All data elements defined in
the file are generated.
NOTE: This file was generated with DERIVED=DEFault
option in effect. Whether data elements are
kept on the file on auxiliary storage or not
is controlled by the complex definition of the
DERIVED option.

Figure 5-1. DB2DSY Time-Span Granularity Chart

230 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

5.2.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

is supported. A "." indicates that the data
element is not supported. The timespans in
which the data element is supported are indicated
by the letters "XDWMYT," which represent the
timespans as follows:

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

XD....E DAY - Day of Month

XDWMY.E DB2ID - DB2 ID
XDW...E HOUR - Hour of Day
XDWM..E MONTH - Month of Year
XDWMY.E SYSID - System Identifier
XDW...E WEEK - Week of Year
XDWMY.E YEAR - Year of Century
XDWMY.E ZONE - Time Zone

Common Data Elements

XD....E DAYNAME - Name of Day of Week

Chapter 5: FILES 231

5.2 DB2 System Activity (DB2DSY) File

X..... DB2ATNM - Active Trace Number Mask

X.....E DB2ISEQ - Instrumentation Sequence Number
X.....E DB2MLVL - MICS DB2 Maintenance Level
XDWMY.E DB2REL - DB2 Release
XDWMY.E DB2RELN - DB2 Release Number
XDWMY.E DB2THDTY - DB2 Thread Type
XDWMY.E DURATION - Recording Interval Time
XDWMY.E ENDTS - End Time Stamp
XDWMY.E STARTTS - Start Time Stamp

Retained Data Elements

XDWMY. DSYASP0 - Start Address Space Procedure 0

XDWMY. DSYASP1 - Start Address Space Procedure 1
XDWMY. DSYASP2 - Start Address Space Procedure 2
XDWMY. DSYASP3 - Start Address Space Procedure 3
XDWMY. DSYASP4 - Start Address Space Procedure 4
XDWMY. DSYASP5 - Start Address Space Procedure 5
X..... DSYDSTSN - Destination Sequence Number
X.....E DSYHRBA - High Used Log RBA
X.....E DSYIDESA - Instrumentation Destination 10
X.....E DSYIDESB - Instrumentation Destination 11
X.....E DSYIDESC - Instrumentation Destination 12
X.....E DSYIDESD - Instrumentation Destination 13
X.....E DSYIDESE - Instrumentation Destination 14
X..... DSYIDESF - Instrumentation Destination 15
X.....E DSYIDES1 - Instrumentation Destination 1
X.....E DSYIDES2 - Instrumentation Destination 2
X.....E DSYIDES3 - Instrumentation Destination 3
X.....E DSYIDES4 - Instrumentation Destination 4
X.....E DSYIDES5 - Instrumentation Destination 5
X.....E DSYIDES6 - Instrumentation Destination 6
X.....E DSYIDES7 - Instrumentation Destination 7
X.....E DSYIDES8 - Instrumentation Destination 8
X.....E DSYIDES9 - Instrumentation Destination 9
X..... DSYIFCSD - IFCID Sequence Number Data Base
X..... DSYIFCSS - IFCID Sequence Number System
X..... DSYIFCSU - IFCID Sequence Number User
X..... DSYIFCSX - IFC sequence number Other
X.....E DSYISEQ - Instrumentation Sequence Number
XDWMY. DSYRMID - DB2 Resource Manager Identifier

Accumulated Data Elements

XDWMY.E DSYABORT - Successful Aborts

XDWMY.E DSYACFTQ - ACCUMACC Count: Failure to Qualify
XDWMY.E DSYACSTL - ACCUMACC Count: Staleness
XDWMY.E DSYACSTR - ACCUMACC Count: Storage Exceeded
XDWMY.E DSYACUTR - ACCUMACC Count: Threshold Exceeded

232 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

XDWMY. DSYAD0NI - Address Space 0 Instructions

XDWMY. DSYAD1NI - Address Space 1 Instructions
XDWMY. DSYAD2NI - Address Space 2 Instructions
XDWMY. DSYAD3NI - Address Space 3 Instructions
XDWMY. DSYAD4NI - Address Space 4 Instructions
XDWMY. DSYAD5NI - Address Space 5 Instructions
XDWMY.E DSYALGCI - Active Log Control Intervals
XDWMY.E DSYARLOG - Archive Log Count
XDWMY.E DSYARLRA - Archive Log Read Allocations
XDWMY.E DSYARLWA - Archive Log Write Allocations
XDWMY.E DSYBFERA - Count of Buffer errors 10
XDWMY.E DSYBFERB - Count of Buffer errors 11
XDWMY.E DSYBFERC - Count of Buffer errors 12
XDWMY.E DSYBFERD - Count of Buffer errors 13
XDWMY.E DSYBFERE - Count of Buffer errors 14
XDWMY. DSYBFERF - Count of Buffer Errors 15
XDWMY.E DSYBFER1 - Count of Buffer errors 1
XDWMY.E DSYBFER2 - Count of Buffer errors 2
XDWMY.E DSYBFER3 - Count of Buffer errors 3
XDWMY.E DSYBFER4 - Count of Buffer errors 4
XDWMY.E DSYBFER5 - Count of Buffer errors 5
XDWMY.E DSYBFER6 - Count of Buffer errors 6
XDWMY.E DSYBFER7 - Count of Buffer errors 7
XDWMY.E DSYBFER8 - Count of Buffer errors 8
XDWMY.E DSYBFER9 - Count of Buffer errors 9
XDWMY. DSYBNASA - Buffer Not Available Audit 140
XDWMY. DSYBNASB - Buffer Not Available Audit 141
XDWMY. DSYBNASC - Buffer Not Available Audit 142
XDWMY. DSYBNASD - Buffer Not Available Data Base
XDWMY. DSYBNASE - Buffer Not Available End Trace
XDWMY. DSYBNASF - Buffer Not Available Audit 145
XDWMY. DSYBNASG - Buffer Not Available Audit 146
XDWMY. DSYBNASH - Buffer Not Available Audit 143
XDWMY. DSYBNASI - Buffer Not Available Audit 144
XDWMY. DSYBNASP - Buffer Not Available System 106
XDWMY. DSYBNASS - Buffer Not Available System
XDWMY. DSYBNAST - Buffer Not Available Start Trace
XDWMY. DSYBNASU - Buffer Not Available User
XDWMY. DSYBNASX - Buffer Not Available - all perf
XDWMY.E DSYBSDSA - BSDS Accesses
XDWMY.E DSYCIN2 - Current Inactive Connections
XDWMY.E DSYCNAT - Current Active DBATs
XDWMY.E DSYCNINO - Control Intervals Offloaded
XDWMY. DSYCOLFA - Collection Failures Audit 140
XDWMY. DSYCOLFB - Collection Failures Audit 141
XDWMY. DSYCOLFC - Collection Failures Audit 142
XDWMY. DSYCOLFD - Collection Failures Data Base
XDWMY. DSYCOLFE - Collection Failures End Trace
XDWMY. DSYCOLFF - Collection Failures Audit 145

Chapter 5: FILES 233

5.2 DB2 System Activity (DB2DSY) File

XDWMY. DSYCOLFG - Collection Failures Audit 146

XDWMY. DSYCOLFH - Collection Failures Audit 143
XDWMY. DSYCOLFI - Collection Failures Audit 144
XDWMY. DSYCOLFP - Collection Failures System 106
XDWMY. DSYCOLFS - Collection Failures System
XDWMY. DSYCOLFT - Collection Failures Start Trace
XDWMY. DSYCOLFU - Collection Failures User
XDWMY. DSYCOLFX - Collection Failures - all perf
XDWMY.E DSYCOMM - Successful Commits
XDWMY.E DSYCONEC - Successful Connects To DB2
XDWMY.E DSYCOST - Processing Cost
XDWMY.E DSYCPTM0 - Accumulated CPU Time Addr0
XDWMY.E DSYCPTM1 - Accumulated CPU Time Addr1
XDWMY.E DSYCPTM2 - Accumulated CPU Time Addr 2
XDWMY.E DSYCPTM3 - Accumulated CPU Time Addr 3
XDWMY.E DSYCPTM4 - Accumulated CPU Time Addr 4
XDWMY.E DSYCPTM5 - Accumulated CPU Time Addr 5
XDWMY.E DSYCPUTM - Accumulated CPU Time All ASIDs
XDWMY.E DSYCSTR - Cold Start Connections
XDWMY.E DSYCTHDW - Create Thread Requests Waited
XDWMY.E DSYCTHRD - Successful Create Threads
XDWMY.E DSYCWRAL - Calls To Write Active Log
XDWMY.E DSYDDFCN - CANCEL DDF Commands
XDWMY.E DSYDDFSP - STOP DDF Commands
XDWMY.E DSYDDFST - START DDF Commands
XDWMY. DSYDISPT - DISPLAY TRACE Commands
XDWMY.E DSYDSCA - Count of IFI Abends
XDWMY.E DSYDSCCO - Count of IFI Command Requests
XDWMY.E DSYDSCRA - Count of IFI Reada Requests
XDWMY.E DSYDSCRS - Count of IFI Reads Requests
XDWMY.E DSYDSCU - Count of IFI Unrecognized Functions
XDWMY.E DSYDSCWR - Count of IFI Write Requests
XDWMY.E DSYDSPDB - Display Database Commands
XDWMY.E DSYDSPLC - DISP LOCATION Commands
XDWMY.E DSYDSPTH - Display Thread Commands
XDWMY.E DSYDSPUT - Display Utility Commands
XDWMY.E DSYEOMEM - End of Memory
XDWMY.E DSYEOTSK - End Of Task
XDWMY.E DSYEXIT - Successful DSN3EXITs
XDWMY.E DSYHUHCM - Unrecognized Commands
XDWMY. DSYIFCNA - IFC Records Not Written Audit 140
XDWMY. DSYIFCNB - IFC Records Not Written Audit 141
XDWMY. DSYIFCNC - IFC Records Not Written Audit 142
XDWMY. DSYIFCND - IFC Records Not Written Data
XDWMY. DSYIFCNE - IFC Records Not Written End Trace
XDWMY. DSYIFCNF - IFC Records Not Written Audit 145
XDWMY. DSYIFCNG - IFC Records Not Written Audit 146
XDWMY. DSYIFCNH - IFC Records Not Written Audit 143
XDWMY. DSYIFCNI - IFC Records Not Written Audit 144

234 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

XDWMY. DSYIFCNP - IFC Records Not Written System 106

XDWMY. DSYIFCNS - IFC Records Not Written System
XDWMY. DSYIFCNT - IFC Records Not Written Start Trace
XDWMY. DSYIFCNU - IFC Records Not Written User
XDWMY. DSYIFCNX - IFC Records Not Written
XDWMY. DSYIFCWA - IFC Rec Success Written Audit 140
XDWMY. DSYIFCWB - IFC Rec Success Written Audit 141
XDWMY. DSYIFCWC - IFC Rec Success Written Audit 142
XDWMY. DSYIFCWD - IFC Rec Success Written Data Base
XDWMY. DSYIFCWE - IFC Rec Success Written End Trace
XDWMY. DSYIFCWF - IFC Rec Success Written Audit 145
XDWMY. DSYIFCWG - IFC Rec Success Written Audit 146
XDWMY. DSYIFCWH - IFC Rec Success Written Audit 143
XDWMY. DSYIFCWI - IFC Rec Success Written Audit 144
XDWMY. DSYIFCWP - IFC Rec Success Written 106 Record
XDWMY. DSYIFCWS - IFC Rec Success Written System
XDWMY. DSYIFCWT - IFC Rec Success Written Start Trace
XDWMY. DSYIFCWU - IFC Rec Success Written User
XDWMY. DSYIFCWX - IFC Records Written
XDWMY.E DSYINDBT - Number Of Indoubt Threads
X..... DSYINSEA - Instrumentation Sequence Count 10
X..... DSYINSEB - Instrumentation Sequence Count 11
X..... DSYINSEC - Instrumentation Sequence Count 12
X..... DSYINSED - Instrumentation Sequence Count 13
X..... DSYINSEE - Instrumentation Sequence Count 14
X..... DSYINSEF - Instrumentation Sequence Count 15
X..... DSYINSE1 - Instrumentation Sequence Count 1
X..... DSYINSE2 - Instrumentation Sequence Count 2
X..... DSYINSE3 - Instrumentation Sequence Count 3
X..... DSYINSE4 - Instrumentation Sequence Count 4
X..... DSYINSE5 - Instrumentation Sequence Count 5
X..... DSYINSE6 - Instrumentation Sequence Count 6
X..... DSYINSE7 - Instrumentation Sequence Count 7
X..... DSYINSE8 - Instrumentation Sequence Count 8
X..... DSYINSE9 - Instrumentation Sequence Count 9
XDWMY.E DSYLWRF - Log Write Requests Force
XDWMY.E DSYLWRNW - Log Write Requests Nowait
XDWMY.E DSYLWRW - Log Write Requests Wait
XDWMY.E DSYMARD - Max Currently Active DBAT Pkgs Bound
XDWMY.E DSYNADS - Current DBATs Not In Use
XDWMY.E DSYNAERA - Count of Not Active errors 10
XDWMY.E DSYNAERB - Count of Not Active errors 11
XDWMY.E DSYNAERC - Count of Not Active errors 12
XDWMY.E DSYNAERD - Count of Not Active errors 13
XDWMY.E DSYNAERE - Count of Not Active errors 14
XDWMY. DSYNAERF - Count of Not-Active Errors 15
XDWMY.E DSYNAER1 - Count of Not Active errors 1
XDWMY.E DSYNAER2 - Count of Not Active errors 2
XDWMY.E DSYNAER3 - Count of Not Active errors 3

Chapter 5: FILES 235

5.2 DB2 System Activity (DB2DSY) File

XDWMY.E DSYNAER4 - Count of Not Active errors 4

XDWMY.E DSYNAER5 - Count of Not Active errors 5
XDWMY.E DSYNAER6 - Count of Not Active errors 6
XDWMY.E DSYNAER7 - Count of Not Active errors 7
XDWMY.E DSYNAER8 - Count of Not Active errors 8
XDWMY.E DSYNAER9 - Count of Not Active errors 9
XDWMY.E DSYNARD - Currently Active DBAT Pkgs Bound
XDWMY.E DSYNCKPT - Count of DB2 Checkpoints
XDWMY.E DSYNDBA - DBATs Created
XDWMY.E DSYNITC - Connections Terminated - Max Inactive
XDWMY.E DSYNQR2 - Current Inactive Connections Queued
XDWMY.E DSYNREC - Count of Type 100 Subtype 0 Recs
XDWMY.E DSYPOOL - Pool DBATs Reused
XDWMY.E DSYPREPR - Successful Prepare To Commits
XDWMY.E DSYQCIT - Current Inactive DBATs
XDWMY.E DSYQCRT - Conversations Deallocated - Max Remote
XDWMY.E DSYQDBT - DBATs Queued - Max Remote Active
XDWMY.E DSYQIN2 - Inactive Connections Queued Requests
XDWMY.E DSYRCNAA - Count of Records not accepted 10
XDWMY.E DSYRCNAB - Count of Records not accepted 11
XDWMY.E DSYRCNAC - Count of Records not accepted 12
XDWMY.E DSYRCNAD - Count of Records not accepted 13
XDWMY.E DSYRCNAE - Count of Records not accepted 14
XDWMY. DSYRCNAF - Count of Records Not Accepted 15
XDWMY.E DSYRCNA1 - Count of Records not accepted 1
XDWMY.E DSYRCNA2 - Count of Records not accepted 2
XDWMY.E DSYRCNA3 - Count of Records not accepted 3
XDWMY.E DSYRCNA4 - Count of Records not accepted 4
XDWMY.E DSYRCNA5 - Count of Records not accepted 5
XDWMY.E DSYRCNA6 - Count of Records not accepted 6
XDWMY.E DSYRCNA7 - Count of Records not accepted 7
XDWMY.E DSYRCNA8 - Count of Records not accepted 8
XDWMY.E DSYRCNA9 - Count of Records not accepted 9
XDWMY.E DSYRCNDA - Records Not Desired Audit 140
XDWMY.E DSYRCNDB - Records Not Desired Audit 141
XDWMY.E DSYRCNDC - Records Not Desired Audit 142
XDWMY.E DSYRCNDD - Records Not Desired Data Base
XDWMY.E DSYRCNDE - Records Not Desired End Trace
XDWMY.E DSYRCNDF - Records Not Desired Audit 145
XDWMY.E DSYRCNDG - Records Not Desired Audit 146
XDWMY.E DSYRCNDH - Records Not Desired Audit 143
XDWMY.E DSYRCNDI - Records Not Desired Audit 144
XDWMY.E DSYRCNDP - Records Not Desired System 106
XDWMY.E DSYRCNDS - Records Not Desired System
XDWMY.E DSYRCNDT - Records Not Desired Start Trace
XDWMY.E DSYRCNDU - Records Not Desired User
XDWMY. DSYRCNDX - Records Not Desired - all perf
XDWMY.E DSYRDAA - Reads Delayed Tape Volume Contention
XDWMY.E DSYRDON - Number of Read Only Commits

236 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

XDWMY.E DSYRECBS - Recover BSDS Commands

XDWMY.E DSYRECIN - Recover Indoubt Commands
XDWMY.E DSYRECNA - Records Unsuccessfully Written 10
XDWMY.E DSYRECNB - Records Unsuccessfully Written 11
XDWMY.E DSYRECNC - Records Unsuccessfully Written 12
XDWMY.E DSYRECND - Records Unsuccessfully Written 13
XDWMY.E DSYRECNE - Records Unsuccessfully Written 14
XDWMY. DSYRECNF - Records Unsuccessfully Written 15
XDWMY.E DSYRECN1 - Records Unsuccessfully Written 1
XDWMY.E DSYRECN2 - Records Unsuccessfully Written 2
XDWMY.E DSYRECN3 - Records Unsuccessfully Written 3
XDWMY.E DSYRECN4 - Records Unsuccessfully Written 4
XDWMY.E DSYRECN5 - Records Unsuccessfully Written 5
XDWMY.E DSYRECN6 - Records Unsuccessfully Written 6
XDWMY.E DSYRECN7 - Records Unsuccessfully Written 7
XDWMY.E DSYRECN8 - Records Unsuccessfully Written 8
XDWMY.E DSYRECN9 - Records Unsuccessfully Written 9
XDWMY.E DSYRECWA - Records Successfully Written 10
XDWMY.E DSYRECWB - Records Successfully Written 11
XDWMY.E DSYRECWC - Records Successfully Written 12
XDWMY.E DSYRECWD - Records Successfully Written 13
XDWMY.E DSYRECWE - Records Successfully Written 14
XDWMY. DSYRECWF - Records Successfully Written 15
XDWMY.E DSYRECW1 - Records Successfully Written 1
XDWMY.E DSYRECW2 - Records Successfully Written 2
XDWMY.E DSYRECW3 - Records Successfully Written 3
XDWMY.E DSYRECW4 - Records Successfully Written 4
XDWMY.E DSYRECW5 - Records Successfully Written 5
XDWMY.E DSYRECW6 - Records Successfully Written 6
XDWMY.E DSYRECW7 - Records Successfully Written 7
XDWMY.E DSYRECW8 - Records Successfully Written 8
XDWMY.E DSYRECW9 - Records Successfully Written 9
XDWMY.E DSYRESLV - Successful Resolve Indoubts
XDWMY.E DSYRSACL - Reads Satisfied Active Log
XDWMY.E DSYRSARL - Reads Satisfied Archive Log
XDWMY.E DSYRSAT - Resynchronizations Attempted
XDWMY. DSYRSINV - Reason Statistics were taken
XDWMY.E DSYRSOB - Reads Satisfied Output Buffers
XDWMY.E DSYRSSU - Resynchronizations Succeeded
XDWMY.E DSYSIGN - Successful Signons
XDWMY.E DSYSPDBA - Stop Database Commands
XDWMY.E DSYSPDB2 - Stop DB2 Commands
XDWMY.E DSYSPTRC - Stop Trace Commands
XDWMY.E DSYSRBTM - Accumulated SRB Time All ASIDs
XDWMY.E DSYSRTM0 - Accumulated SRB Time Addr0
XDWMY.E DSYSRTM1 - Accumulated SRB Time Addr1
XDWMY.E DSYSRTM2 - Accumulated SRB Time Addr 2
XDWMY.E DSYSRTM3 - Accumulated SRB Time Addr 3
XDWMY.E DSYSRTM4 - Accumulated SRB Time Addr 4

Chapter 5: FILES 237

5.2 DB2 System Activity (DB2DSY) File

XDWMY.E DSYSRTM5 - Accumulated SRB Time Addr 5

XDWMY.E DSYSSICL - Number of SSI Calls
XDWMY.E DSYSTDBA - Start Database Commands
XDWMY.E DSYSTDB2 - Start DB2 Commands
XDWMY.E DSYSTTRC - Start Trace Commands
XDWMY.E DSYSUSCT - DSY Suspend Count
XDWMY.E DSYSYNC - Successful Synchronizes
XDWMY.E DSYTCBTM - Accumulated TCB Time All ASIDs
XDWMY.E DSYTCTAD - Access Database Commands
XDWMY.E DSYTCTM0 - Accumulated TCB Time Addr0
XDWMY.E DSYTCTM1 - Accumulated TCB Time Addr1
XDWMY.E DSYTCTM2 - Accumulated TCB Time Addr 2
XDWMY.E DSYTCTM3 - Accumulated TCB Time Addr 3
XDWMY.E DSYTCTM4 - Accumulated TCB Time Addr 4
XDWMY.E DSYTCTM5 - Accumulated TCB Time Addr 5
XDWMY.E DSYTCTRE - Start Rlimit Count
XDWMY.E DSYTCTRF - Stop Rlimit Count
XDWMY.E DSYTCTRG - Display Rlimit Count
XDWMY.E DSYTCTRH - Modify Trace Count
XDWMY.E DSYTCTRN - Alter Bufferpool Count
XDWMY.E DSYTCTRO - Display Bufferpool Count
XDWMY.E DSYTCTRP - Set Archive Count
XDWMY.E DSYTCTRQ - Display Archive Count
XDWMY.E DSYTCTRR - Reset Indoubt Count
XDWMY.E DSYTCTSD - Display Profile Commands
XDWMY.E DSYTCTSS - Start Profile Commands
XDWMY.E DSYTCTST - Stop Profile Commands
XDWMY.E DSYTCTX5 - DISPLAY DDF Commands
XDWMY.E DSYTERM - Successful Terminates
XDWMY.E DSYTERMU - Term Utility Commands
XDWMY.E DSYWFAIA - Count of Write failures 10
XDWMY.E DSYWFAIB - Count of Write failures 11
XDWMY.E DSYWFAIC - Count of Write failures 12
XDWMY.E DSYWFAID - Count of Write failures 13
XDWMY.E DSYWFAIE - Count of Write failures 14
XDWMY. DSYWFAIF - Count of Write Failures 15
XDWMY.E DSYWFAI1 - Count of Write failures 1
XDWMY.E DSYWFAI2 - Count of Write failures 2
XDWMY.E DSYWFAI3 - Count of Write failures 3
XDWMY.E DSYWFAI4 - Count of Write failures 4
XDWMY.E DSYWFAI5 - Count of Write failures 5
XDWMY.E DSYWFAI6 - Count of Write failures 6
XDWMY.E DSYWFAI7 - Count of Write failures 7
XDWMY.E DSYWFAI8 - Count of Write failures 8
XDWMY.E DSYWFAI9 - Count of Write failures 9
XDWMY.E DSYWSTR - Warm Start Connections
XDWMY.E DSYWUWB - Wait Unavailable Write Buffer

Maximum Data Elements

238 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

XDWMY.E DSYHWCT - High Water Mark for CTHREAD Threads

XDWMY.E DSYHWIB - High Water Mark for IDBACK Threads
XDWMY.E DSYHWIF - High Water Mark for IDFORE Threads
XDWMY.E DSYMHWAT - Active DBATs High-Water Mark
XDWMY.E DSYMHWDT - Remote Connections High-Water Mark
XDWMY.E DSYMMADS - DBATs Not In Use High-Water Mark
XDWMY.E DSYMMIN2 - Inactive Connections High-Water Mark
XDWMY.E DSYMMQR2 - Inactive Connections Queued HWM
XDWMY.E DSYMQMIT - Inactive DBATs High-Water Mark

Chapter 5: FILES 239

5.2 DB2 System Activity (DB2DSY) File

5.2.3 Usage Considerations

This section identifies the special considerations or
techniques related to using the DB2DSY file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the Information Area
name and "t" is the time-span. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier, to summarize the data as indicated by the _BY and
_BREAK macro definitions.

Special Considerations/Techniques

1. The following data elements only have meaning when using

the DB2DSYnn file in the DETAIL time-span, in that they
lose significance once summarization has been performed.
These data elements should only be referenced when using
the DB2DSYnn file in the DETAIL time-span.

DSYISEQ - Instrumentation Sequence Number

DSYDSTSN - Destination Sequence Number
DSYINSEQ - Instrumentation Sequence Number
DSYIFCSD - IFCID Sequence Number Data Base
DSYIFCSS - IFCID Sequence Number System
DSYIFCSU - IFCID Sequence Number User

2. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher time-spans,
certain fields lose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

3. The data elements STARTTS and ENDTS have different

240 Analyzer Option for DB2 Guide

5.2 DB2 System Activity (DB2DSY) File

with STARTTS indicating the lowest date and time and

ENDTS indicating the greatest date and time for the
summarized data.

Retrieval Examples

1. Plot the accumulated TCB time used by DB2 over the last
8 weeks by week.

DATA TEST1;
SET _DB2W.DB2DSY01
_DB2W.DB2DSY02
_DB2W.DB2DSY03
_DB2W.DB2DSY04
;
DATE=DATEPART(STARTTS);
FORMAT DATE DATE7.;
MACRO _BY WEEK %
MACRO _BREAK WEEK %
PROC SORT DATA=TEST1 OUT=TEST1; BY _BY;
DATA TEST1;
SET TEST1;
_DSYSUM;
PROC PLOT DATA=TEST1;
PLOT DSYTCBTM*DATE;
TITLE DB2 SYSTEM TCB TIME;

2. Print the number of START DB2, START DATABASE, and

DISPLAY DATABASE commands issued last week in Zone 1.

DATA TEST2;
SET _DB2W.DB2DSY01;
IF ZONE=1;
PROC PRINT DATA=TEST2;
VAR DSYSTDB2 DSYSTDBA DSYSPDB;
TITLE NUMBER OF START DB2, START DATABASE, AND START
DATABASE COMMANDS;
TITLE2 LAST WEEK IN ZONE 1;

Chapter 5: FILES 241

5.3 DB2 Data Base Activity (DB2DSD) File

FILENAME=DB2DSDxx

The DB2 Data Base Activity file maintains DB2 database

Activity data, i.e. SQL Statements, Binds, Buffer Manager,
and Lock Usage data. This file is derived from the SMF DB2
record type 100 subtype 1. This file exists in the DETAIL,
DAYS, WEEKS, MONTHS, and YEARS timespans.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Elements List
3 - Usage Considerations

242 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

5.3.1 File Organization

NOTE: The time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to reflect the CA MICS system at your
installation.

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-2. DB2DSD Time-Span Granularity Chart

Chapter 5: FILES 243

5.3 DB2 Data Base Activity (DB2DSD) File

5.3.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

XD....E DAY - Day of Month

XDWMY.E DB2ID - DB2 ID
XDW...E HOUR - Hour of Day
XDWM..E MONTH - Month of Year
XDWMY.E SYSID - System Identifier
XDW...E WEEK - Week of Year
XDWMY.E YEAR - Year of Century
XDWMY.E ZONE - Time Zone

Common Data Elements

XD....E DAYNAME - Name of Day of Week

244 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DB2ISEQ - Instrumentation Sequence Number

X.....E DB2MLVL - MICS DB2 Maintenance Level
XDWMY.E DB2REL - DB2 Release
XDWMY.E DB2RELN - DB2 Release Number
XDWMY.E DURATION - Recording Interval Time
XDWMY.E ENDTS - End Time Stamp
XDWMY.E STARTTS - Start Time Stamp

Retained Data Elements

XDWMY.E DSDAFLG - Flag Byte

XDWMY.E DSDARLID - Resource Limit Table ID
X..... DSDATNM - Active Trace Number Mask
X.....E DSDDSTSN - Destination Sequence Number
X.....E DSDISEQ - Instrumentation Sequence Number
XDWMY. DSDRMID - DB2 Resource Manager Identifier

Accumulated Data Elements

XDWMY.E DSDABBP0 - Active Buffers In Buffer Pool 0

XDWMY.E DSDABBP1 - Active Buffers In Buffer Pool 1
XDWMY.E DSDABBP2 - Active Buffers In Buffer Pool 2
XDWMY.E DSDABBP3 - Active Buffers In Buffer Pool 3
XDWMY.E DSDACHG - Change Request Count
XDWMY.E DSDACHUS - Highest CPU 16 Microseconds Used
XDWMY.E DSDACLMT - Limit In CPU 16 Microseconds
XDWMY.E DSDAIRLM - Other IRLM Request Count
XDWMY.E DSDALDAB - NO. of ALTER DATABASE Stmts
XDWMY.E DSDALLOC - Successful Bound Plan Allocation
XDWMY.E DSDALOCA - Requests To Allocate Bound Plan
XDWMY.E DSDALOCK - Lock Request Count
XDWMY.E DSDALSEQ - Alter Sequence Statements
XDWMY.E DSDALTIX - Alter Index Statements
XDWMY.E DSDALTJR - Alter JAR Statements
XDWMY.E DSDALTST - Alter Stogroup Statements
XDWMY.E DSDALTTA - Alter Table Statements
XDWMY.E DSDALTTS - Alter Tablespace Statements
XDWMY.E DSDALTTX - Alter Trusted Context Statements
XDWMY.E DSDALTVW - Alter View Statements
XDWMY.E DSDAQRY - Query Request Count
XDWMY.E DSDASLAT - Suspend Count - Latch Conflict
XDWMY.E DSDASLMT - Limit In SUs - ASUTIME
XDWMY.E DSDASOTH - Suspend Count - Other Conflict
XDWMY. DSDAUCC - AUTH Checks Using Cache
XDWMY.E DSDAUCHK - Authorization Checks
XDWMY.E DSDAUNLK - Unlock Request Count
XDWMY. DSDAUPUB - AUTH Checks Based PUBLIC Auth
XDWMY.E DSDAUTOB - Attempts To AUTOBIND a Pkg
XDWMY.E DSDBIND - Successful Automatic Binds

Chapter 5: FILES 245

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDBINDA - Automatic Bind Attempts

XDWMY.E DSDBNDAA - Bind Action Add Subcommands
XDWMY.E DSDBNDAR - Bind Action Replace Subcommands
XDWMY.E DSDBNDPA - BIND (ADD) PACKAGE Sub-Cmnds
XDWMY.E DSDBNDPR - BIND (REP) PACKAGE Sub-Cmnds
XDWMY.E DSDBPSO0 - Buffer Pool Data Set Opened 0
XDWMY.E DSDBPSO1 - Buffer Pool Data Set Opened 1
XDWMY.E DSDBPSO2 - Buffer Pool Data Set Opened 2
XDWMY.E DSDBPSO3 - Buffer Pool Data Set Opened 3
XDWMY.E DSDCLOSE - Close Statements
XDWMY.E DSDCMTON - Comment On Statements
XD....E DSDCOLS - Invalid Select Procedure Encountered
XDWMY.E DSDCOST - Processing Cost
XDWMY.E DSDCRAL - CREATE ALIAS
XDWMY.E DSDCRCTX - Create Trusted Context Statements
XDWMY.E DSDCRDAB - Create Database Statements
XDWMY.E DSDCRINX - Create Index Statements
XDWMY.E DSDCRROL - Create Role Statements
XDWMY.E DSDCRSEQ - Create Sequence Statements
XDWMY.E DSDCRSTG - Create Stogroup Statements
XDWMY.E DSDCRSYN - Create Synonym Statements
XDWMY.E DSDCRTAB - Create Table Statements
XDWMY.E DSDCTABS - Create Tablespace Statements
XDWMY.E DSDCWLD - Times Duplicate Concentrate Dyna Stmnts
XDWMY.E DSDCWLM - Times Matched Concentrate Dyna Stmnts
XDWMY.E DSDCWLP - Times Parsed Concentrate Dyna Stmnts
XDWMY.E DSDCWLR - Times Replaced Concentrate Dyna Stmnts
XDWMY.E DSDDBDG - Requests for Database Descriptors
XDWMY.E DSDDBDL - Number of Loads of Database Descriptors
XDWMY.E DSDDBPR0 - Physical Data Base Page Requests 0
XDWMY.E DSDDBPR1 - Physical Data Base Page Requests 1
XDWMY.E DSDDBPR2 - Physical Data Base Page Requests 2
XDWMY.E DSDDBPR3 - Physical Data Base Page Requests 3
XDWMY.E DSDDBPU0 - Data Base Page Updates 0
XDWMY.E DSDDBPU1 - Data Base Page Updates 1
XDWMY.E DSDDBPU2 - Data Base Page Updates 2
XDWMY.E DSDDBPU3 - Data Base Page Updates 3
XDWMY.E DSDDEAD - Deadlock Count
XDWMY.E DSDDEFVU - Create View Statements
XDWMY.E DSDDELET - Delete Statements
XDWMY.E DSDDESC - Describe Statements
XDWMY.E DSDDEXP - PREPARE Discarded
XDWMY.E DSDDINV - PREPARE Purged
XDWMY. DSDDLRU - Number of Stealable DB Descriptors
XDWMY.E DSDDMCT0 - No. Times DM Critical WPHFWT reached 0
XDWMY.E DSDDMCT1 - No. Times DM Critical WPHFWT Reached 1
XDWMY.E DSDDMCT2 - No. Times DM Critical WPHFWT Reached 2
XDWMY.E DSDDMCT3 - No. Times DM Critical WPHFWT Reached 3
XDWMY.E DSDDRAL - DROP ALIAS

246 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDDRPDB - Drop Database Statements

XDWMY.E DSDDRPIX - Drop Index Statements
XDWMY.E DSDDRPKG - NO. of DROP PACKAGE Stmts
XDWMY.E DSDDRPRO - Drop Role Statements
XDWMY.E DSDDRPST - Drop Stogroup Statements
XDWMY.E DSDDRPSY - Drop Synonym Statements
XDWMY.E DSDDRPTA - Drop Table Statements
XDWMY.E DSDDRPTS - Drop Tablespace Statements
XDWMY.E DSDDRPTX - Drop Trusted Context Statements
XDWMY.E DSDDRPVU - Drop View Statements
XDWMY.E DSDDRSEQ - Drop Sequence Statements
XDWMY.E DSDDSCRT - NO. of DESCRIBE TABLE Stmts
XDWMY.E DSDDSDRN - DDs That Drain Has Produced
XDWMY.E DSDDSOPN - Data Sets Currently Open
XDWMY.E DSDDSPBD - Plans Bound And Kept
XDWMY.E DSDDWRT0 - No. Times Deferred Write Threshold 0
XDWMY.E DSDDWRT1 - No. Times Deferred Write Threshold 1
XDWMY.E DSDDWRT2 - No. Times Deferred Write Threshold 2
XDWMY.E DSDDWRT3 - No. Times Deferred Write Threshold 3
XDWMY. DSDECFAL - No. of Failures: Full Statement Pool
XDWMY. DSDECFRE - No. of Free Pages in Statement Pool
XDWMY. DSDECPGE - No. of Pages in Statement Pool
XDWMY. DSDECTA - Pages Used for Cursor Tables Above 2GB
XDWMY.E DSDECTG - NO. Requests for Cursor Table Section
XDWMY.E DSDECTL - NO. Loaded Cursor Table Sections
XDWMY.E DSDECTU - Pages Used for Cursor Tables Below 2GB
XDWMY.E DSDEDBD - Number of Pages used for DBD
XDWMY.E DSDEDSC - Number of Pages used for Cache
XDWMY.E DSDEDSG - Number of Requests for Dynamic Cache
XDWMY.E DSDEDSI - Number of Inserts for Dynamic Cache
XDWMY. DSDEDYNP - No. of Pages Used in Statement Pool
XDWMY.E DSDEFAL - Number of Failures Due to Full EDM Pool
XDWMY. DSDEKFAL - No. of Failures: Full Skeleton Pool
XDWMY. DSDEKFRE - No. of Free Pages in Skeleton Pool
XDWMY. DSDEKNFA - NOT FOUND Records Added to EDM Cache
XDWMY. DSDEKNFM - NOT FOUND Records in EDM Cache
XDWMY. DSDEKNFR - NOT FOUND Recs. Removed from EDM Cache
XDWMY. DSDEKPGE - No. of Pages in Skeleton Pool
XDWMY. DSDEPTA - Pages Used for Package Tables Above 2GB
XDWMY.E DSDEPTG - No. Req for Package Table Sections
XDWMY.E DSDEPTL - No. Loaded Package Table Sections
XDWMY. DSDEPTU - Pages Used for Package Tables Below 2GB
XDWMY. DSDESFAL - No. of Failures: Full Stmt (>2GB) Pool
XDWMY. DSDESFRE - No. of Free Pages in Stmt (>2GB) Pool
XDWMY.E DSDESKC - No. Free Pages Used for SKCT Table
XDWMY.E DSDESKP - No. Free Pages Used for SKPT Table
XDWMY. DSDESPGE - No. of Pages in Statement (>2GB) Pool
XDWMY. DSDESTMT - Number of Statements in EDM Pool
XDWMY.E DSDFETCH - Fetch Statements

Chapter 5: FILES 247

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDFLSE - No. of False Contentions

XDWMY.E DSDFND - PREPARE Request Satisfied
XDWMY.E DSDFREAP - Attempts To FREE a Package
XDWMY.E DSDFREE - Free Subcommands
XDWMY.E DSDFREEA - Attempts To Free Plan
XDWMY.E DSDFREEP - Plan Successfully Freed
XDWMY.E DSDFREPK - FREE PACKAGE Sub-Cmnds
XDWMY.E DSDFRIDS - Times RID List Overflowed RID Storage
XDWMY.E DSDFRIDT - Times RID List Overflowed RID Exceeded
XDWMY.E DSDFRPG - Number of Free Pages in Free Chain
XDWMY.E DSDGRANT - Grant Statements
XDWMY.E DSDIMWS0 - Count of Immediate Writes Sys Pages 0
XDWMY.E DSDIMWS1 - Count of Immediate Writes Sys Pages 1
XDWMY.E DSDIMWS2 - Count of Immediate Writes Sys Pages 2
XDWMY.E DSDIMWS3 - Count of Immediate Writes Sys Pages 3
XDWMY.E DSDINCRB - Incremental Binds
XDWMY.E DSDINSRT - Insert Statements
XDWMY.E DSDIPRP - Implicit PREPARE Performed
XDWMY.E DSDJINCS - Times RID List Append RID Storage
XDWMY.E DSDJINCT - Times RID List Append RID Exceeded
XDWMY. DSDKLRU - Number of Stealable Skeleton Pkg Table
XDWMY. DSDKSPA - Number of Pages Alloc for Exec Procs
XDWMY.E DSDLABEL - Label Statements
XDWMY.E DSDLEEM - Count of Escalations to Exclusive Mode
XDWMY.E DSDLESM - Count of Escalations to Shared Mode
XDWMY.E DSDLOCK - Lock Table Statements
XDWMY.E DSDLPF0 - No. List Prefetch Requested BP0
XDWMY.E DSDLPF1 - No. List Prefetch Requested BP1
XDWMY.E DSDLPF2 - No. List Prefetch Requested BP2
XDWMY.E DSDLPF3 - No. List Prefetch Requested BP3
XDWMY. DSDMAX0 - BP Not Supp Concur WK File 0
XDWMY. DSDMAX1 - BP Not Supp Concur WK File 1
XDWMY. DSDMAX2 - BP Not Supp Concur WK File 2
XDWMY. DSDMAX3 - BP Not Supp Concur WK File 3
XDWMY.E DSDMERGE - Merge Statements
XDWMY. DSDMIXNL - Mult INDX Not Used - RID Limit
XDWMY. DSDMIXNU - Mult INDX Not Used - No Storage
XDWMY. DSDMIXU - Multiple Index Path Used
XDWMY.E DSDMMRR0 - Media Manager Read Requests 0
XDWMY.E DSDMMRR1 - Media Manager Read Requests 1
XDWMY.E DSDMMRR2 - Media Manager Read Requests 2
XDWMY.E DSDMMRR3 - Media Manager Read Requests 3
XDWMY.E DSDMXCUR - Max PB Count On Free PB
XDWMY.E DSDMXPL - Max. no. of Page locks held
XDWMY.E DSDNFND - PREPARE Request - No Match
XDWMY.E DSDNPRP - PREPARE Avoided
XDWMY.E DSDNREC - Count of Type 100 Subtype 1 Recs
XDWMY.E DSDNVRID - Allocate Requests Nonexist Plan
XDWMY.E DSDOPEN - Open Statements

248 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDPAGE - No. Pages in EDM Pool

XDWMY.E DSDPKABN - Packages Autobound
XDWMY.E DSDPKALC - Attempts To Allocate a Pkg
XDWMY.E DSDPKALL - Packages Allocated
XDWMY.E DSDPKGBD - Packages Bound
XDWMY.E DSDPKGFR - Packages Freed
XDWMY.E DSDPKGRB - Packages Rebound
XDWMY.E DSDPREP - Prepare Statements
XDWMY.E DSDPREPI - Prepare Statements Restricted
XDWMY.E DSDQUERY - Fetch and Select Statements
XDWMY.E DSDRBND - Successful Rebind Plan
XDWMY.E DSDRBNDA - Rebind Plan Attempts
XDWMY.E DSDRBNDP - REBIND PACKAGE Sub-Cmnds
XDWMY.E DSDRBNPA - Attempts To REBIND a Package
XDWMY. DSDRCUR - Int BLKS Currently Alloc
XDWMY.E DSDRDLTD - Deleted Rows
XDWMY.E DSDREBND - Rebind Subcommands
XDWMY.E DSDREEP0 - Prefetch Request Disabled no Read 0
XDWMY.E DSDREEP1 - Prefetch Request Disabled no Read 1
XDWMY.E DSDREEP2 - Prefetch Request Disabled no Read 2
XDWMY.E DSDREEP3 - Prefetch Request Disabled no Read 3
XDWMY.E DSDREOPN - PB Found On Free Q During Open
XDWMY.E DSDREVOK - Revoke Statements
XDWMY.E DSDRFCHD - Fetched Rows
XDWMY.E DSDRFXS0 - Read Pagefixed W/O Real Storage 0
XDWMY.E DSDRFXS1 - Read Pagefixed W/O Real Storage 1
XDWMY.E DSDRFXS2 - Read Pagefixed W/O Real Storage 2
XDWMY.E DSDRFXS3 - Read Pagefixed W/O Real Storage 3
XDWMY. DSDRHIG - Highest # Int BLKS Concur Alloc
XDWMY. DSDRLLM - RLP Stop: RID Limit Exceeded
XDWMY.E DSDRMAX - RLP Stop: Concur. Proc Lim Exceeded
XDWMY. DSDRNIX - Rename Index Statements
XDWMY.E DSDRNSTD - Inserted Rows
XDWMY. DSDRPLM - RLP Stop: DM Limit Exceeded
XDWMY.E DSDRSTG - RLP Stop: Insufficient Storage
XDWMY.E DSDRUDTD - Updated Rows
XDWMY.E DSDSABBP - Total Active Buffers in Buffer Pools
XDWMY.E DSDSARA - Total Pages Moved HPOOL to VPOOL ADMF
XDWMY.E DSDSARF - Total Pages Not Moved via ADMF
XDWMY.E DSDSAWA - Total Pages Moved VPOOL to HPOOL ADMF
XDWMY.E DSDSAWF - Total Pages for Write Not Moved ADMF
XDWMY.E DSDSBPSO - Total Buffer Pool Data Sets Opened
XDWMY. DSDSCIO - Total Castout I/O Operations
XDWMY.E DSDSDBPR - Total Physical Data Base Page Requests
XDWMY.E DSDSDBPU - Total Data Base Page Updates
XDWMY.E DSDSDIO - Total Async Read I/Os Dynamic Prefetch
XDWMY.E DSDSDMCT - Total Times WPHFWT Threshold Reached
XDWMY.E DSDSDPF - Total Times Dynamic Prefetch Requested
XDWMY.E DSDSDPP - Total Async Page Reads Dynamic Prefetch

Chapter 5: FILES 249

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDSDWRT - Total Times Deferred Write Threshold

XDWMY.E DSDSDWV - Total Times Vert. Defer Write Thresh
XDWMY.E DSDSELCT - Select Statements
XDWMY.E DSDSETHV - NO. of SET HOST-VAR Stmts
XDWMY.E DSDSHBE - Total HPOOL Buffers Backed Exp Storage
XDWMY.E DSDSHPA - Total Successful HPOOL Expand/Contract
XDWMY.E DSDSHPL - Total Buffers Allocated for HPOOL
XDWMY.E DSDSHRA - Total Pages Moved Async HPOOL to VPOOL
XDWMY.E DSDSHRE - Total Success Sync Req HPOOL to VPOOL
XDWMY.E DSDSHRF - Total Pages Read Failed Page Stolen
XDWMY.E DSDSHWA - Total Pages Moved Async VPOOL to HPOOL
XDWMY.E DSDSHWF - Total Pages Write Failed Exp Stg Short
XDWMY.E DSDSHWR - Total Request Move Sync VPOOL to HPOOL
XDWMY.E DSDSIMWS - Total Immediate Writes System Pages
XDWMY.E DSDSIO0 - Sync Read I/Os Seq Access Req BP0
XDWMY.E DSDSIO1 - Sync Read I/Os Seq Access Req BP1
XDWMY.E DSDSIO2 - Sync Read I/Os Seq Access Req BP2
XDWMY.E DSDSIO3 - Sync Read I/Os Seq Access Req BP3
XDWMY.E DSDSJIS - Total Req. Prefetch I/O Streams Denied
XDWMY.E DSDSLIO - Total Async Read I/Os List Prefetch
XDWMY.E DSDSLPF - Total List Prefetch Requested
XDWMY.E DSDSLPP - Total Async Page Reads List Prefetch
XDWMY.E DSDSLWDD - DDs Used for Slow Close TS
XDWMY.E DSDSMAX - Total BP Not Supp Concur WK File
XDWMY.E DSDSMIAP - Times RID List Retrieval Skipped
XDWMY.E DSDSMMRR - Total Media Manager Read Requests
XDWMY.E DSDSMRPR - Total Media Mgr Read Req Phys Req Buf
XDWMY.E DSDSNGT - Total Times Cond GETPAGE Not Satisfied
XDWMY. DSDSPCO - Total Pages Written for Castout I/Os
XDWMY.E DSDSPDF0 - Prefetch Request Disabled no Buffer 0
XDWMY.E DSDSPDF1 - Prefetch Request Disabled no Buffer 1
XDWMY.E DSDSPDF2 - Prefetch Request Disabled no Buffer 2
XDWMY.E DSDSPDF3 - Prefetch Request Disabled no Buffer 3
XDWMY.E DSDSPL1 - Total Times Pref Quantity 1/2 Normal
XDWMY.E DSDSPL2 - Total Times Pref Quantity 1/4 Normal
XDWMY.E DSDSPPF0 - Count Records Read Prefetch Requests 0
XDWMY.E DSDSPPF1 - Count Records Read Prefetch Requests 1
XDWMY.E DSDSPPF2 - Count Records Read Prefetch Requests 2
XDWMY.E DSDSPPF3 - Count Records Read Prefetch Requests 3
XDWMY.E DSDSPQF - Total Times Parallel Buffer Not Alloc
XDWMY.E DSDSPQO - Total Req. Process Queries in Parallel
XDWMY.E DSDSPWPU - Total Page Write per Page Updt Buffer
XDWMY.E DSDSPWR0 - System Pages Written To DASD 0
XDWMY.E DSDSPWR1 - System Pages Written To DASD 1
XDWMY.E DSDSPWR2 - System Pages Written To DASD 2
XDWMY.E DSDSPWR3 - System Pages Written To DASD 3
XDWMY. DSDSQCA - Storage Allocated for Plans (>2GB) Bar
XDWMY. DSDSQCB - Storage Allocated for Plans (<2GB) Bar
XDWMY. DSDSQKA - Storage Allocated for Pkgs (>2GB) Bar

250 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY. DSDSQKB - Storage Allocated for Pkgs (<2GB) Bar

XDWMY.E DSDSQLID - SET Current SQLID Request Count
XDWMY.E DSDSQPF0 - Count Sequential Prefetch requests 0
XDWMY.E DSDSQPF1 - Count Sequential Prefetch requests 1
XDWMY.E DSDSQPF2 - Count Sequential Prefetch requests 2
XDWMY.E DSDSQPF3 - Count Sequential Prefetch requests 3
XDWMY.E DSDSREEP - Total Prefetch Disabled No Read Engine
XDWMY.E DSDSRFRI - Total Read Frames per Read Req Buffer
XDWMY.E DSDSRFXS - Total Read Pagefixed W/O Real Storage
XDWMY.E DSDSSEF0 - Storage Shortage Expansion Fails 0
XDWMY.E DSDSSEF1 - Storage Shortage Expansion Fails 1
XDWMY.E DSDSSEF2 - Storage Shortage Expansion Fails 2
XDWMY.E DSDSSEF3 - Storage Shortage Expansion Fails 3
XDWMY.E DSDSSGT - Total GETPAGE Requests Seq Access Req
XDWMY.E DSDSSIO - Total Sync Read I/Os Seq Access Req
XDWMY.E DSDSSPDF - Total Seq. Prefetch Disabled No Buffer
XDWMY.E DSDSSPPF - Total Records Read Prefetch Request
XDWMY.E DSDSSPWR - Total System Pages Written to DASD
XDWMY.E DSDSSQPF - Total Sequential Prefetch Requests
XDWMY.E DSDSSSEF - Total Storage Shortage Expansion Fails
XDWMY.E DSDSTMIG - Total Migrated Datasets Encountered
XDWMY.E DSDSTPFB - Total WK File Abort - No BP Available
XDWMY.E DSDSTPFC - Total WK PF End - Concur PF of Page
XDWMY.E DSDSTPF0 - Total WK PF Abort - 0 PF QTY
XDWMY.E DSDSTPIO - Total Prefetch Async Read I/Os
XDWMY.E DSDSTRTO - Total Recall Timeouts
XDWMY.E DSDSUSP - Suspend Count
XDWMY.E DSDSVPA - Total Successful VPOOL Expand/Contract
XDWMY.E DSDSVPL - Total Buffers Allocated for VPOOL
XDWMY.E DSDSWBVQ - Total Pages Deq VDWQ Destr Read Req
XDWMY.E DSDSWDRP - Total Pages Destruct Read Request
XDWMY.E DSDSWFD - Total Work Files Denied Sort Merge
XDWMY.E DSDSWFF - Total Poor Sort Merge - Buffer Short
XDWMY.E DSDSWFM - Total Max WK File Alloc Sort Merge
XDWMY.E DSDSWFR - Total Req Query WK File Sort Merge
XDWMY.E DSDSWFT - Total Work Files Req Sort Merge
XDWMY.E DSDSWFXS - Total Write Pagefixed W/O Real Storage
XDWMY.E DSDSWREE - Total Times Write Engine Unavailable
XDWMY.E DSDSWRMM - Total Write I/Os By Media Manager
XDWMY.E DSDSXFL - Total Buffer Not Located -- VPOOL Full
XDWMY.E DSDSXIS - Total Max # Concur Pref Streams Alloc
XDWMY.E DSDTESTB - Binds Without Plan ID
XDWMY.E DSDTIMO - Timeout Count
XDWMY.E DSDTMIG0 - NO. Migrated Dataset Encounter Buffer 0
XDWMY.E DSDTMIG1 - NO. Migrated Dataset Encounter Buffer 1
XDWMY.E DSDTMIG2 - NO. Migrated Dataset Encounter Buffer 2
XDWMY.E DSDTMIG3 - NO. Migrated Dataset Encounter Buffer 3
XDWMY. DSDTPFB0 - WK File Abort - No BP Available 0
XDWMY. DSDTPFB1 - WK File Abort - No BP Available 1

Chapter 5: FILES 251

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY. DSDTPFB2 - WK File Abort - No BP Available 2

XDWMY. DSDTPFB3 - WK File Abort - No BP Available 3
XDWMY. DSDTPFC0 - WK PF End - Concur PF of Page 0
XDWMY. DSDTPFC1 - WK PF End - Concur PF OF PAGE 1
XDWMY. DSDTPFC2 - WK PF End - Concur PF OF PAGE 2
XDWMY. DSDTPFC3 - WK PF End - Concur PF OF PAGE 3
XDWMY. DSDTPF00 - WK PF Abort - 0 PF QTY 0
XDWMY. DSDTPF01 - WK PF Abort - 0 PF QTY 1
XDWMY. DSDTPF02 - WK PF Abort - 0 PF QTY 2
XDWMY. DSDTPF03 - WK PF Abort - 0 PF QTY 3
XDWMY.E DSDTPIO0 - NO. Prefetch Async Read I/Os Buffer 0
XDWMY.E DSDTPIO1 - NO. Prefetch Async Read I/Os Buffer 1
XDWMY.E DSDTPIO2 - NO. Prefetch Async Read I/Os Buffer 2
XDWMY.E DSDTPIO3 - NO. Prefetch Async Read I/Os Buffer 3
XDWMY.E DSDTRTBL - Truncate Table Statements
XDWMY.E DSDTRTO0 - NO. Recall Timeouts Buffer 0
XDWMY.E DSDTRTO1 - NO. Recall Timeouts Buffer 1
XDWMY.E DSDTRTO2 - NO. Recall Timeouts Buffer 2
XDWMY.E DSDTRTO3 - NO. Recall Timeouts Buffer 3
XDWMY.E DSDUPDTE - Update Statements
XDWMY.E DSDUSUC - Checks Actually Authorized
XDWMY.E DSDWBVQ0 - Pages Deq VDWQ Destr Read Rq 0
XDWMY.E DSDWBVQ1 - Pages Deq VDWQ Destr Read Rq 1
XDWMY.E DSDWBVQ2 - Pages Deq VDWQ Destr Read Rq 2
XDWMY.E DSDWBVQ3 - Pages Deq VDWQ Destr Read Rq 3
XDWMY.E DSDWDRP0 - Pages Destruct Read Req 0
XDWMY.E DSDWDRP1 - Pages Destruct Read Req 1
XDWMY.E DSDWDRP2 - Pages Destruct Read Req 2
XDWMY.E DSDWDRP3 - Pages Destruct Read Req 3
XDWMY.E DSDWFD0 - Work Files Denied Sort Merge 0
XDWMY.E DSDWFD1 - Work Files Denied Sort Merge 1
XDWMY.E DSDWFD2 - Work Files Denied Sort Merge 2
XDWMY.E DSDWFD3 - Work Files Denied Sort Merge 3
XDWMY.E DSDWFF0 - Poor Sort Merge - Buf Short 0
XDWMY.E DSDWFF1 - Poor Sort Merge - Buf Short 1
XDWMY.E DSDWFF2 - Poor Sort Merge - Buf Short 2
XDWMY.E DSDWFF3 - Poor Sort Merge - Buf Short 3
XDWMY.E DSDWFM0 - Max WK File Alloc Sort Merge 0
XDWMY.E DSDWFM1 - Max WK File Alloc Sort Merge 1
XDWMY.E DSDWFM2 - Max WK File Alloc Sort Merge 2
XDWMY.E DSDWFM3 - Max WK File Alloc Sort Merge 3
XDWMY.E DSDWFR0 - Req Query WK File Sort Merge 0
XDWMY.E DSDWFR1 - Req Query WK File Sort Merge 1
XDWMY.E DSDWFR2 - Req Query WK File Sort Merge 2
XDWMY.E DSDWFR3 - Req Query WK File Sort Merge 3
XDWMY.E DSDWFT0 - Work Files Req Sort Merge 0
XDWMY.E DSDWFT1 - Work Files Req Sort Merge 1
XDWMY.E DSDWFT2 - Work Files Req Sort Merge 2
XDWMY.E DSDWFT3 - Work Files Req Sort Merge 3

252 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDWFXS0 - Write Pagefixed W/O Real Storage 0

XDWMY.E DSDWFXS1 - Write Pagefixed W/O Real Storage 1
XDWMY.E DSDWFXS2 - Write Pagefixed W/O Real Storage 2
XDWMY.E DSDWFXS3 - Write Pagefixed W/O Real Storage 3
XDWMY.E DSDWREE0 - No. Times Write Engine Unavailable 0
XDWMY.E DSDWREE1 - No. Times Write Engine Unavailable 1
XDWMY.E DSDWREE2 - No. Times Write Engine Unavailable 2
XDWMY.E DSDWREE3 - No. Times Write Engine Unavailable 3
XDWMY.E DSDWRMM0 - Write I/Os By Media Manager 0
XDWMY.E DSDWRMM1 - Write I/Os By Media Manager 1
XDWMY.E DSDWRMM2 - Write I/Os By Media Manager 2
XDWMY.E DSDWRMM3 - Write I/Os By Media Manager 3

Minimum Data Elements

XDWMY. DSDMNCFR - Min Free Pages in Statement Pool

XDWMY. DSDMNDRU - Min Stealable DB Descriptors
XDWMY. DSDMNKFR - Min Free Pages in Skeleton Pool
XDWMY. DSDMNKRU - Min Stealable Skeleton Pkg Table
XDWMY. DSDMNQCA - Min Storage Alloc for Plans (>2GB) Bar
XDWMY. DSDMNQCB - Min Storage Alloc for Plans (<2GB) Bar
XDWMY. DSDMNQKA - Min Storage Alloc for Pkgs (>2GB) Bar
XDWMY. DSDMNQKB - Min Storage Alloc for Pkgs (<2GB) Bar
XDWMY.E DSDMNRPG - Min Free Pages in Free Chain
XDWMY. DSDMNSFR - Min Free Pages in Statement (>2GB) Pool
XDWMY. DSDMNSPA - Min Pgs Alloc for Exec Procs

Maximum Data Elements

XDWMY.E DSDAPREC - How Limit Was Determined

XDWMY.E DSDMXBDG - Max Requests for DBD
XDWMY.E DSDMXBDL - Max Loads of DBD
XDWMY. DSDMXCFA - Max Failures: Full Statement Pool
XDWMY. DSDMXCFR - Max Free Pages in Statement Pool
XDWMY. DSDMXCPG - Max Pages in Statement Pool
XDWMY. DSDMXCTA - Max Pages Used for Cursor Tables (>2GB)
XDWMY.E DSDMXCTG - Max Requests for Cursor Table Sections
XDWMY.E DSDMXCTL - Max Loaded Cursor Table Sections
XDWMY.E DSDMXCTU - Max Pages Used for Cursor Tables (<2GB)
XDWMY.E DSDMXDBD - Max Pages Used for DBD
XDWMY.E DSDMXDRS - Max DDs That Drain Has Produced
XDWMY. DSDMXDRU - Max Stealable Database Descriptors
XDWMY.E DSDMXDSO - Max Data Sets Open Concurrently
XDWMY. DSDMXDYN - Max Pages Used in Statement Pool
XDWMY.E DSDMXFAL - Max. No. Failures Due To Full EDM Pool
XDWMY. DSDMXKFA - Max Failures: Full Skeleton Pool
XDWMY. DSDMXKFR - Max Free Pages in Skeleton Pool
XDWMY. DSDMXKPG - Max Pages in Skeleton Pool
XDWMY. DSDMXKRU - Max Stealable Skeleton Pkg Table

Chapter 5: FILES 253

5.3 DB2 Data Base Activity (DB2DSD) File

XDWMY.E DSDMXPGE - Max Pages in EDM Pool

XDWMY. DSDMXPTA - Max Pages Used for Pkg Tables (>2GB)
XDWMY.E DSDMXPTG - Max Requests for Package Table Section
XDWMY.E DSDMXPTL - Max Loaded Package Table Sections
XDWMY. DSDMXPTU - Max Pages Used for Pkg Tables (<2GB)
XDWMY. DSDMXQCA - Max Storage Alloc for Plans (>2GB) Bar
XDWMY. DSDMXQCB - Max Storage Alloc for Plans (<2GB) Bar
XDWMY. DSDMXQKA - Max Storage Alloc for Pkgs (>2GB) Bar
XDWMY. DSDMXQKB - Max Storage Alloc for Pkgs (<2GB) Bar
XDWMY.E DSDMXROP - Max PB Found on Free Q During Open
XDWMY.E DSDMXRPG - Max Free Pages in Free Chain
XDWMY. DSDMXSFA - Max Failures: Full Stmt (>2GB) Pool
XDWMY. DSDMXSFR - Max Free Pages in Statement (>2GB) Pool
XDWMY.E DSDMXSKC - Max Pages Used for SKCT Table
XDWMY.E DSDMXSKP - Max Pages Used for SKPT Table
XDWMY.E DSDMXSLW - Max DDs Used for Slow Close TS
XDWMY. DSDMXSPA - Max Pgs Alloc for Exec Procs
XDWMY. DSDMXSPG - Max Pages in Statement (>2GB) Pool
XDWMY. DSDMXSTM - Max Number of Statements in EDM Pool

Derived Data Elements

XDWMY. DSDMRPR0 - Media Read Req Per Phys Req Buffer 0

XDWMY. DSDMRPR1 - Media Read Req Per Phys Req Buffer 1
XDWMY. DSDMRPR2 - Media Read Req Per Phys Req Buffer 2
XDWMY. DSDMRPR3 - Media Read Req Per Phys Req Buffer 3
XDWMY. DSDPCWDP - Duplicate Per Parsed Dyna Stmnts
XDWMY. DSDPCWMP - Matched Per Parsed Dyna Stmnts
XDWMY. DSDPCWRP - Replaced Per Parsed Dyna Stmnts
XDWMY. DSDPWPU0 - Page Write Per Page Update Buffer 0
XDWMY. DSDPWPU1 - Page Write Per Page Update Buffer 1
XDWMY. DSDPWPU2 - Page Write Per Page Update Buffer 2
XDWMY. DSDPWPU3 - Page Write Per Page Update Buffer 3
XDWMY. DSDRFRI0 - Read Frames Per Read Req Buffer 0
XDWMY. DSDRFRI1 - Read Frames Per Read Req Buffer 1
XDWMY. DSDRFRI2 - Read Frames Per Read Req Buffer 2
XDWMY. DSDRFRI3 - Read Frames Per Read Req Buffer 3

254 Analyzer Option for DB2 Guide

5.3 DB2 Data Base Activity (DB2DSD) File

5.3.3 Usage Considerations

This section identifies any special considerations or
techniques related to using the DB2DSD file. Additionally,
several sample retrieval examples are provided to facilitate
the use of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the Information Area
name and "t" is the Time-span. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier, to summarize the data as indicated by the _BY and
_BREAK macro definitions.

Special Considerations/Techniques

1. The following data elements only have meaning when using

the DB2DSDnn file in the DETAIL time-span, in that they
loose significance once summarization has been
performed. These data elements should only be
referenced when using the DB2DSDnn file in the DETAIL
time-span.

DSDISEQ - Instrumentation Sequence Number

DSDDSTSN - Destination Sequence Number
DSDATNM - Active Trace Number Mask

2. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher Time-spans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

3. The data elements STARTTS and ENDTS have different

meanings when used in the DETAIL time-span versus their
meaning in the DAYS, WEEKS, MONTHS, and YEARS
time-spans. The ENDTS and STARTTS, when appearing in
the DAYS, WEEKS, MONTHS, and YEARS time-spans, indicate
the span of time over which the data has been summarized
with STARTTS indicating the lowest date and time and
ENDTS indicating the greatest date and time for the

Chapter 5: FILES 255

5.3 DB2 Data Base Activity (DB2DSD) File

summarized data.

Retrieval Examples

1. Plot the number of data sets concurrently open

throughout the day yesterday.

DATA TEST1;
SET _DB2D.DB2DSD01;
TIME=TIMEPART(ENDTS);
FORMAT TIME TIME8.;
PROC PLOT DATA=TEST1;
PLOT DSDDSOPN*TIME;
TITLE DB2 DATA SETS OPEN;

2. Print the number of automatic bind requests yesterday

during Zone 1 which failed.

DATA TEST2;
SET _DB2D.DB2DSD01;
IF ZONE=1;
PROC PRINT DATA=TEST2;
MACRO _BY DAY %
MACRO _BREAK DAY %
PROC SORT DATA=TEST2 OUT=TEST2; BY _BY;
DATA TEST2;
SET TEST2;
_DSDSUM;
DATA _NULL_;
SET TEST2;
FILE PRINT;
FAILED=DSDBINDA-DSDBIND;
PUT @51 'NUMBER OF FAILED BIND ATTEMPTS';
PUT @62 'IN ZONE 1';
PUT @63 FAILED;
STOP;

256 Analyzer Option for DB2 Guide

5.4 DB2 User Activity (DB2DSU) File

FILENAME=DB2DSUxx

The DB2 User Activity file maintains DB2 accounting data,

including product, user, instrumentation, SQL statements,
buffer manager, and lock usage data by user. This file is
derived from the SMF DB2 record type 101 and by default,
exists in the DAYS, WEEKS, MONTHS, and YEARS timespans. If
your site is planning to charge users for DB2 activity, the
DB2DSU file is useful for computing charges.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Elements List
3 - Usage Considerations

Chapter 5: FILES 257

5.4 DB2 User Activity (DB2DSU) File

5.4.1 File Organization

The table below identifies data elements by which the file is
sequenced and summarized in each Time-span. "N/A" indicates
that the file is not supported in a Time-span.

NOTE: The Time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS system
at your installation.

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-3. DB2DSU Time-Span Granularity Chart

258 Analyzer Option for DB2 Guide

5.4 DB2 User Activity (DB2DSU) File

5.4.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

.D....E DAY - Day of Month

.DWMY.E DB2ACT1 - AUTHORIZATION ID
.DWMY.E DB2ACT2 - CORRELATION ID
.DWMY.E DB2ACT3 - CONNECTION ID
.DWMY.E DB2ACT4 - DISTRIBUTED THREAD TYPE
.DWMY.E DB2ID - DB2 ID
.DW...E HOUR - Hour of Day
.DWM..E MONTH - Month of Year
.DWMY.E SYSID - System Identifier
.DW...E WEEK - Week of Year
.DWMY.E YEAR - Year of Century
.DWMY.E ZONE - Time Zone

Chapter 5: FILES 259

5.4 DB2 User Activity (DB2DSU) File

Common Data Elements

.D....E DAYNAME - Name of Day of Week

...... DB2ACE - DB2 Agent Control Element
.DWMY. DB2ATNM - Active Trace Number Mask
.DWMY.E DB2AUTH - Authorization Identifier
.DWMY.E DB2CONN - Connection Identifier
.DWMY.E DB2CORR - Correlation Identifier
......E DB2CPU - DB2 CPU Time
......E DB2CRDLU - CICS/RRSAF/DB Access LU Name
......E DB2CRDNT - CICS/RRSAF/DB Access Network Name
......E DB2CRDUV - CICS/RRSAF/DB Access Uniqueness Value
.DWMY.E DB2DDFCT - DDF DB2 Commits Received from Remote
.DWMY. DB2DSTSN - Destination Sequence Number
.DWMY. DB2ISEQ - Instrumentation Sequence Number
......E DB2LOCN - DB2 Local Location ID
.DWMY. DB2LUNAM - Logical Unit NAME
......E DB2MLVL - MICS DB2 Maintenance Level
.DWMY. DB2NETID - Network ID
.DWMY.E DB2OPID - Original Operator ID
......E DB2PLAN - Plan Name
......E DB2PTASK - Special Transaction Type Identifier
.DWMY. DB2REL - DB2 Release
.DWMY.E DB2RELN - DB2 Release Number
.DWMY.E DB2REQID - DB2 Requestor Location ID
.DWMY.E DB2STCK - DB2 Store Clock At End Event
.DWMY.E DB2THDTY - DB2 Thread Type
...... DB2UNIQ - DB2 Instance Number
.DWMY.E ENDTS - End Time Stamp
.DWMY.E STARTTS - Start Time Stamp
......E TRANETS - Transaction End Time Stamp
......E TRANSTS - Transaction Start Time Stamp
......E UOWID - Unit of Work Id
......E UOWIDSEQ - Unit of Work Id Sequence Number

Retained Data Elements

.DWMY.E DSUAFLG - Flag Byte

.DWMY.E DSUARLID - Resource Limit Table ID
.DWMY.E DSUASLMT - Limit In SUs - ASUTIME
...... DSUBEGSC - Beginning Store Clock
......E DSUBGTCB - Beginning TCB Timer
...... DSUCATYP - Connecting System Type Code
...... DSUDSTSN - Destination Sequence Number
...... DSUENDSC - Ending Store Clock
......E DSUENTCB - Ending TCB Timer
...... DSUISEQ - Instrumentation Sequence Number
.DWMY.E DSUNETID - DB2 Network Identifier

260 Analyzer Option for DB2 Guide

5.4 DB2 User Activity (DB2DSU) File

......E DSUOPID - Original Operator ID

......E DSUPLAN - Plan Name
......E DSUREASN - Reason For Accounting Record
.DWMY.E DSURMID - DB2 Resource Manager Identifier

Accumulated Data Elements

.DWMY.E DSUABABD - Abnormal Application Abend

.DWMY.E DSUABEOM - Abnormal End of Memory
.DWMY.E DSUABFRC - Abnormal Force Command
.DWMY.E DSUABORT - Abort Requests
.DWMY.E DSUABRIN - Abnormal Resolve Indoubt
.DWMY.E DSUACHG - Change Request Count
.DWMY.E DSUACHUS - Highest CPU 16 Microseconds Used
.DWMY.E DSUACLMT - Limit In CPU 16 Microseconds
.DWMY.E DSUACNT - No. ACCUMACC Records Encountered
.DWMY.E DSUACSTL - ACCUMACC Count: Staleness
.DWMY.E DSUACSTR - ACCUMACC Count: Storage Exceeded
.DWMY.E DSUACUTR - ACCUMACC Count: Threshold Exceeded
.DWMY.E DSUAIRLM - Other IRLM Request Count
.DWMY.E DSUALDAB - NO. ALTER DATABASE Statements
.DWMY.E DSUALGTM - Class 3 Accum Wait Archive Log Time
.DWMY.E DSUALLTM - Lock & Latch time
.DWMY.E DSUALOCK - Lock Request Count
.DWMY.E DSUALTIX - Alter Index Statements
.DWMY.E DSUALTJR - Alter JAR Statements
.DWMY.E DSUALTST - Alter Stogroup Statements
.DWMY.E DSUALTTA - Alter Table Statements
.DWMY.E DSUALTTS - Alter Tablespace Statements
.DWMY.E DSUALTTX - Alter Trusted Context Statements
.DWMY.E DSUALTVW - Alter View Statements
.DWMY.E DSUAQRY - Query Request Count
.DWMY.E DSUARLCT - NO. Archive Log Suspensions
.DWMY.E DSUARLH - Wait Trace Events Latch Contention
.DWMY.E DSUASLAT - Suspend Count - Latch Conflict
.DWMY.E DSUASOTH - Suspend Count - Other Conflict
.DWMY.E DSUAUNLK - Unlock Request Count
.DWMY.E DSUAWBTM - Wait Time - TCP/IP LOB Material
.DWMY.E DSUAWETM - Class 3 Accum Wait Service Task Time
.DWMY.E DSUAWLTM - Accum Wait Time - Latch Contention
.DWMY.E DSUAWRTM - Class 3 Accum Wait Read Other Time
.DWMY.E DSUAWWTM - Class 3 Accum Wait Write Other Time
.DWMY.E DSUBPNX - Parallel Groups Run Cross Data Share
.DWMY.E DSUCIMW0 - No. of Immed. Sync Write I/O Buffer BP0
.DWMY.E DSUCIMW1 - No. of Immed. Sync Write I/O Buffer BP1
.DWMY.E DSUCIMW2 - No. of Immed. Sync Write I/O Buffer BP2
.DWMY.E DSUCIMW3 - No. of Immed. Sync Write I/O Buffer BP3
.DWMY.E DSUCLOSE - Close Statements
.DWMY.E DSUCLRAB - NO. Log Record Bytes Written

Chapter 5: FILES 261

5.4 DB2 User Activity (DB2DSU) File

.DWMY.E DSUCLRN - NO. Log Records Written

.DWMY.E DSUCMTON - Comment On Statements
.DWMY.E DSUCOMM2 - Commit Phase Two Invocations
.DWMY.E DSUCOST - Processing Cost
.DWMY.E DSUCPODB - CPU Time Only on a DB2 TCB
.DWMY.E DSUCPUNI - User Instructions
.DWMY.E DSUCPUTM - Accumulated CPU Time
.DWMY.E DSUCPUZ1 - Accum CPU Tm Used on z/OS Spec Eng
.DWMY.E DSUCPUZ2 - CPU Tm Used in DB2 on z/OS Spec Eng
.DWMY.E DSUCP1TM - Total CP Class 1 CPU Time
.DWMY.E DSUCP2TM - Total CP Class 2 CPU Time
.DWMY.E DSUCRAL - CREATE ALIAS
.DWMY.E DSUCRCTX - Create Trusted Context Statements
.DWMY.E DSUCRDAB - Create Database Statements
.DWMY.E DSUCRINX - Create Index Statements
.DWMY.E DSUCRROL - Create Role Statements
.DWMY.E DSUCRSTG - Create Stogroup Statements
.DWMY.E DSUCRSYN - Create Synonym Statements
.DWMY.E DSUCRTAB - Create Table Statements
.DWMY.E DSUCTABS - Create Tablespace Statements
.DWMY.E DSUCWLD - Times Duplicate Concentrate Dyna Stmnts
.DWMY.E DSUCWLM - Times Matched Concentrate Dyna Stmnts
.DWMY.E DSUCWLP - Times Parsed Concentrate Dyna Stmnts
.DWMY.E DSUCWLR - Times Replaced Concentrate Dyna Stmnts
.DWMY.E DSUDEAD - Deadlock Count
.DWMY.E DSUDEFVU - Create View Statements
.DWMY.E DSUDELET - Delete Statements
.DWMY.E DSUDESC - Describe Statements
.DWMY.E DSUDGBUF - Parallel Groups to Seq Storage Short
.DWMY.E DSUDGCUR - Parallel Groups to Seq Cursor Update
.DWMY.E DSUDGESA - Parallel Groups to Seq No ESA Sort
.DWMY.E DSUDRAL - DROP ALIAS
.DWMY.E DSUDRPDB - Drop Database Statements
.DWMY.E DSUDRPIX - Drop Index Statements
.DWMY.E DSUDRPKG - NO. DROP PACKAGE Statements
.DWMY.E DSUDRPRO - Drop Role Statements
.DWMY.E DSUDRPST - Drop Stogroup Statements
.DWMY.E DSUDRPSY - Drop Synonym Statements
.DWMY.E DSUDRPTA - Drop Table Statements
.DWMY.E DSUDRPTS - Drop Tablespace Statements
.DWMY.E DSUDRPTX - Drop Trusted Context Statements
.DWMY.E DSUDRPVU - Drop View Statements
.DWMY.E DSUDSCRT - NO. DESCRIBE TABLE Statements
.DWMY.E DSUEGENC - Parallel Groups Executed Sequential
.DWMY.E DSUELGZP - Accumulated CPU Time zIIP-Eligible Work
.DWMY.E DSUELPTM - Elapsed Time
.DWMY.E DSUENTEX - NO. Entry/Exit events processed
.DWMY.E DSUET2TM - Elapsed Time in DB2
.DWMY.E DSUFETCH - Fetch Statements rel 2

262 Analyzer Option for DB2 Guide

5.4 DB2 User Activity (DB2DSU) File

.DWMY.E DSUFRIDS - Times RID List Overflowed RID Storage

.DWMY.E DSUFRIDT - Times RID List Overflowed RID Exceeded
.DWMY.E DSUGPGR0 - GETPAGE Requests BP0
.DWMY.E DSUGPGR1 - GETPAGE Requests BP1
.DWMY.E DSUGPGR2 - GETPAGE Requests BP2
.DWMY.E DSUGPGR3 - GETPAGE Requests BP3
.DWMY.E DSUGRANT - Grant Statements
.DWMY.E DSUINCRB - Incremental Binds
.DWMY.E DSUINSRT - Insert Statements
.DWMY.E DSUIOETM - DB2 Accumulated I/O Elapsed Wait Time
.DWMY.E DSUJINCS - Times RID List Append RID Storage
.DWMY.E DSUJINCT - Times RID List Append RID Exceeded
.DWMY.E DSULABEL - Label Statements rel 2
.DWMY.E DSULEEM - NO. Lock Escalations to Exclusive mode
.DWMY.E DSULESM - NO. Lock Escalations to shared mode
.DWMY.E DSULOCK - Lock Table Statements
.DWMY.E DSULPF0 - No. List Prefetch Requested BP0
.DWMY.E DSULPF1 - No. List Prefetch Requested BP1
.DWMY.E DSULPF2 - No. List Prefetch Requested BP2
.DWMY.E DSULPF3 - No. List Prefetch Requested BP3
.DWMY.E DSUMERGE - Merge Statements
.DWMY.E DSUMIXNL - Mult Indx Not Used - RID Limit
.DWMY.E DSUMIXNU - Mult Indx Not Used - No Storage
.DWMY.E DSUMIXU - Multiple Index Path Used
.DWMY.E DSUMXPL - Max. no. Page locks held
.DWMY.E DSUNATHD - Count of ACCUMACC Roll-up Threads
.DWMY.E DSUNOGRP - Parallel Groups Exec Planned Degree
.DWMY.E DSUNTDEL - Normal Deallocation
.DWMY.E DSUNTEND - Normal Application Ended
.DWMY.E DSUNTEOT - Normal End of Task
.DWMY.E DSUNTHRD - Count Of Threads Initiated
.DWMY.E DSUNTIFI - Normal IFI READS Request
.DWMY.E DSUNTNUS - Normal New User
.DWMY.E DSUNTSUS - Normal Same User Partial Signon
.DWMY.E DSUOPEN - Open Statements
.DWMY.E DSUORNO - Parallel Groups Executed Coordination
.DWMY.E DSUORR - Parallel Groups Executed Repeat-read
.DWMY.E DSUPCWDP - Duplicate Per Parsed Dyna Stmnts
.DWMY.E DSUPCWMP - Matched Per Parsed Dyna Stmnts
.DWMY.E DSUPCWRP - Replaced Per Parsed Dyna Stmnts
.DWMY.E DSUPELPT - Parallel Subtasks Elapsed Time
.DWMY.E DSUPET2T - Parallel Subtasks Elapsed Time in DB2
.DWMY.E DSUPGDTT - Parallel GPS Using UDF - Ex. Single DB2
.DWMY.E DSUPREP - Prepare Statements
.DWMY.E DSUPRFH0 - Prefetch Read Requests Buffer BP0
.DWMY.E DSUPRFH1 - Prefetch Read Requests Buffer BP1
.DWMY.E DSUPRFH2 - Prefetch Read Requests Buffer BP2
.DWMY.E DSUPRFH3 - Prefetch Read Requests Buffer BP3
.DWMY.E DSUPSTCT - Parallel Subtasks Count

Chapter 5: FILES 263

5.4 DB2 User Activity (DB2DSU) File

.DWMY.E DSUQUERY - Fetch and Select Statements

.DWMY.E DSURDGRP - Parallel Groups Reduced Storage Short
.DWMY.E DSURDLTD - Deleted Rows
.DWMY.E DSUREVOK - Revoke Statements
.DWMY.E DSURFCHD - Fetched Rows
.DWMY.E DSURLFDP - Query Parallelism Disabled by RLF
.DWMY. DSURNIX - Rename Index Statements
.DWMY.E DSURNKCL - No. Wait Trace Glbl Cont. Child LLock
.DWMY.E DSURNMOL - No. Wait Trace Glbl Cont. Other LLock
.DWMY.E DSURNNPL - No. Wait Trace Glbl Cont. PP PLock
.DWMY.E DSURNOPL - No. Wait Trace Glbl Cont. PG PLock
.DWMY.E DSURNQOL - No. Wait Trace Glbl Cont. Other PLock
.DWMY.E DSURNSTD - Inserted Rows
.DWMY.E DSURPOP1 - Parallel GPS Reformatted - Sysplx Conf
.DWMY.E DSURPOP2 - Parallel GPS Reformatted - Buffer Resrc
.DWMY.E DSURRAIC - Commit Specified for RRSAF Thread
.DWMY.E DSURUDTD - Updated Rows
.DWMY.E DSUSCIMW - Total Immed. Sync Write I/Os Count
.DWMY.E DSUSDPF - Total Dynamic Prefetch Requests
.DWMY.E DSUSELCT - Select Statements rel 2
.DWMY.E DSUSETHV - NO. SET HOST-VAR Statements
.DWMY.E DSUSGPGR - Total GETPAGE Requests
.DWMY.E DSUSHPG - Total Pages HPOOL to VPOOL Prefetch
.DWMY.E DSUSHRE - Total Sync Req Move Pge HPOOL to VPOOL
.DWMY.E DSUSHRF - Total Unsucc. Read Req Expanded Stg
.DWMY.E DSUSHWF - Total Unsucc. Write Req Expanded Stg
.DWMY.E DSUSHWR - Total Sync Req Move Pge VPOOL to HPOOL
.DWMY.E DSUSKIP - Parallel Coordination Bypass DB2
.DWMY.E DSUSLPF - Total Times List Prefetch Requested
.DWMY.E DSUSMIAP - Times RID List Retrieval Skipped
.DWMY.E DSUSNGT - Total Times GETPAGE Req Not Satisfied
.DWMY.E DSUSPCTM - Accum CPU Time SQL Procedures Main Unit
.DWMY.E DSUSPRFH - Total Times List Prefetch Requested
.DWMY.E DSUSPRU0 - System Page Record Update BP0
.DWMY.E DSUSPRU1 - System Page Record Update BP1
.DWMY.E DSUSPRU2 - System Page Record Update BP2
.DWMY.E DSUSPRU3 - System Page Record Update BP3
.DWMY.E DSUSPZET - Total Elapsed Time on zIIP Stored Proc.
.DWMY.E DSUSPZTM - CPU Tm Exec Strd Proc on z/OS Spec Eng
.DWMY.E DSUSQLID - NO. Of Set Current SQLID
.DWMY.E DSUSRIO0 - Synchronous Read I/Os BP0
.DWMY.E DSUSRIO1 - Synchronous Read I/Os BP1
.DWMY.E DSUSRIO2 - Synchronous Read I/Os BP2
.DWMY.E DSUSRIO3 - Synchronous Read I/Os BP3
.DWMY.E DSUSSIO - Total Async Pages Read by Prefetch
.DWMY.E DSUSSPRU - Total System Page Record Update
.DWMY.E DSUSSRIO - Total Synchronous Read I/Os
.DWMY.E DSUSUSP - Suspend Count
.DWMY.E DSUTCBTM - TCB Time

264 Analyzer Option for DB2 Guide

5.4 DB2 User Activity (DB2DSU) File

.DWMY.E DSUTC2TM - Class 2 Accumulated TCB Time in DB2

.DWMY.E DSUTELPT - Comprehensive Elapsed Time
.DWMY.E DSUTET2T - Comprehensive Elapsed Time in DB2
.DWMY.E DSUTHINA - DDF Thread Becomes Inactive
.DWMY.E DSUTHIN2 - Type 2 Inactive Thread Becomes Inactive
.DWMY.E DSUTIMO - Timeout Count
.DWMY.E DSUTOGRP - Parallel Groups Executed
.DWMY.E DSUTRTBL - Truncate Table Statements
.DWMY.E DSUTRTZP - CPU Tm Exec Triggers on z/OS Spec Eng
.DWMY.E DSUTSQLE - Number of SQL Statements Executed
.DWMY.E DSUUPDTE - Update Statements
.DWMY.E DSUWATRB - Wt Trace for TCP/IP LOB Material
.DWMY.E DSUWATRL - NO. Wait Trace Events for Lock/Latch
.DWMY.E DSUWATRR - NO. Wait Trace Events for Read Other
.DWMY.E DSUWATRW - NO. Wait Trace Events for Write Other
.DWMY.E DSUWATSE - NO. Wait Trace Events for Sync. Exec.
.DWMY.E DSUWATTR - NO. Wait Trace events processed
.DWMY.E DSUWGLTM - Glbl Contention PG P-Lock Wait Time
.DWMY.E DSUWLCTM - Glbl Contention Child L-Lock Wait Time
.DWMY.E DSUWLLTM - Glbl Contention Other L-Locks Wait Time
.DWMY.E DSUWLPTM - Glbl Contention PP P-Lock Wait Time
.DWMY.E DSUWTOTM - Glbl Contention Other P-Locks Wait Time
.DWMY.E DSUWUABD - Work In Doubt Abend
.DWMY.E DSUWUEOM - Work In Doubt End of Memory
.DWMY.E DSUWUFRC - Work In Doubt Force Command
.DWMY.E DSUWURIN - Work In Doubt Resolve Indoubt
.DWMY.E DSUXSODB - DB2 Only and Non zIIP-Eligible CPU Time
.DWMY.E DSUXSPTM - CPU Time Excluding Special CPU Time

Maximum Data Elements

.DWMY.E DSUAPREC - How Limit Was Determined

.DWMY.E DSUMMXPL - Max Max. no. Page locks held
.DWMY.E DSUMXDEG - Max Degree of Parallelism

Chapter 5: FILES 265

5.4 DB2 User Activity (DB2DSU) File

5.4.3 Usage Considerations

This section identifies any special considerations and/or
techniques related to using the DB2DSU file. Additionally,
several sample retrieval examples are provided to facilitate
the use of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the Information Area
name and "t" is the Time-span. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier, to summarize the data as indicated by the _BY and
_BREAK macro definitions.

Special Considerations/Techniques

1. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
a file's granularity increases in higher Time-spans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. Data elements STARTTS and ENDTS have different

Retrieval Examples

These examples assume that element DB2AUTH is a

sort/sequence element on the DSU file. If it is stored
as a DB2ACTn element, substitute the correct DB2ACTn
element name where appropriate.

1. List all users who issued a CREATE TABLE statement

yesterday and the number of statements issued listed in

266 Analyzer Option for DB2 Guide

5.4 DB2 User Activity (DB2DSU) File

order from highest to lowest.

DATA TEST1;
SET _DB2D.DB2DSU01;
IF DSUCRTAB>0;
MACRO _BY DB2AUTH % /*
MACRO _BREAK DB2AUTH %
PROC SORT DATA=TEST1 OUT=TEST1; BY _BY;
DATA TEST1;
SET TEST1;
_DSUSUM;
PROC SORT DATA=TEST1 OUT=TEST1; BY DESCENDING DSUCRTAB;
PROC PRINT DATA=TEST1;
VAR DB2AUTH DSUCRTAB;
TITLE USERS EXECUTING CREATE TABLE STATEMENTS;

2. Show the distribution of DB2 various statements by user

over the last four weeks.

DATA TEST2;
SET _DB2W.DB2DSU01
_DB2W.DB2DSU02
_DB2W.DB2DSU03
_DB2W.DB2DSU04
;
MACRO _BY DB2AUTH %
MACRO _BREAK DB2AUTH %
PROC SORT DATA=TEST2 OUT=TEST2; BY _BY;
DATA TEST2;
SET TEST2;
_DSUSUM;
PROC FREQ DATA=STUFF; BY DB2AUTH;
TABLES
DSUQUERY DSUINSRT DSUUPDTE DSUDELET
DSUDESC DSUCTABS DSUCRSYN DSUCRDAB
DSUCRSTG DSUDEFVU DSUDRPIX DSUDRPTA
DSUDRPTS DSUDRPDB DSUDRPSY DSUDRPST
DSUDRPVU DSUALTST DSUALTTS DSUALTTA
DSUALTIX DSUCMTON DSULOCK DSUGRANT
DSUREVOK
;

Chapter 5: FILES 267

5.5 DB2 Plan Activity (DB2DSP) File

FILENAME=DB2DSPxx

The DB2 Plan Activity file maintains the same DB2 Accounting
data as the DB2DSU file but organizes it by DB2 Plan
(application). This file is derived from the SMF DB2 record
type 101. This file exists in the DAYS, WEEKS, MONTHS, and
YEARS timespans.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Elements List
3 - Usage Considerations

268 Analyzer Option for DB2 Guide

5.5 DB2 Plan Activity (DB2DSP) File

5.5.1 File Organization

The table below identifies data elements by which the file is
sequenced and summarized in each Time-span. "N/A" indicates
that the file is not supported in a Time-span.

NOTE: The Time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS system
at your installation.

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-4. DB2DSP Time-Span Granularity Chart

Chapter 5: FILES 269

5.5 DB2 Plan Activity (DB2DSP) File

5.5.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

.D....E DAY - Day of Month

.DWMY.E DB2CONN - Connection Identifier
.DWMY.E DB2ID - DB2 ID
.DWMY.E DB2PLAN - Plan Name
.DW...E HOUR - Hour of Day
.DWM..E MONTH - Month of Year
.DWMY.E SYSID - System Identifier
.DW...E WEEK - Week of Year
.DWMY.E YEAR - Year of Century
.DWMY.E ZONE - Time Zone

Common Data Elements

270 Analyzer Option for DB2 Guide

5.5 DB2 Plan Activity (DB2DSP) File

.D.... DAYNAME - Name of Day of Week

...... DB2ACE - DB2 Agent Control Element
...... DB2ATNM - Active Trace Number Mask
...... DB2AUTH - Authorization Identifier
...... DB2CORR - Correlation Identifier
...... DB2CPU - DB2 CPU Time
.DWMY. DB2DDFCT - DDF DB2 Commits Received from Remote
...... DB2DSTSN - Destination Sequence Number
...... DB2ISEQ - Instrumentation Sequence Number
......E DB2LOCN - DB2 Local Location ID
...... DB2LUNAM - Logical Unit NAME
......E DB2MLVL - MICS DB2 Maintenance Level
...... DB2NETID - Network ID
...... DB2OPID - Original Operator ID
......E DB2PTASK - Special Transaction Type Identifier
.DWMY. DB2REL - DB2 Release
.DWMY.E DB2RELN - DB2 Release Number
...... DB2REQID - DB2 Requestor Location ID
...... DB2STCK - DB2 Store Clock At End Event
.DWMY.E DB2THDTY - DB2 Thread Type
...... DB2UNIQ - DB2 Instance Number
.DWMY.E ENDTS - End Time Stamp
.DWMY.E STARTTS - Start Time Stamp
......E TRANETS - Transaction End Time Stamp
......E TRANSTS - Transaction Start Time Stamp
......E UOWID - Unit of Work Id
......E UOWIDSEQ - Unit of Work Id Sequence Number

Retained Data Elements

.DWMY.E DSPAFLG - Flag Byte

.DWMY.E DSPARLID - Resource Limit Table ID
...... DSPBEGSC - Beginning Store Clock
...... DSPBGTCB - Beginning TCB Timer
...... DSPCATYP - Connecting System Type Code
...... DSPDSTSN - Destination Sequence Number
...... DSPENDSC - Ending Store Clock
...... DSPENTCB - Ending TCB Timer
...... DSPISEQ - Instrumentation Sequence Number
.DWMY. DSPNETID - Network Identifier
...... DSPOPID - Original Operator ID
.DWMY. DSPPLAN - Plan Name
...... DSPREASN - Reason For Accounting Record
.DWMY. DSPRMID - DB2 Resource Manager Identifier

Accumulated Data Elements

.DWMY.E DSPABABD - Abnormal Application Abend

Chapter 5: FILES 271

5.5 DB2 Plan Activity (DB2DSP) File

.DWMY.E DSPABEOM - Abnormal End of Memory

.DWMY.E DSPABFRC - Abnormal Force Command
.DWMY.E DSPABORT - Abort Requests
.DWMY.E DSPABRIN - Abnormal Resolve Indoubt
.DWMY.E DSPACHG - Change Request Count
.DWMY.E DSPACHUS - Highest CPU 16 Microseconds Used
.DWMY.E DSPACLMT - Limit In CPU 16 Microseconds
.DWMY.E DSPACNT - No. ACCUMACC Records Encountered
.DWMY.E DSPACSTL - ACCUMACC Count: Staleness
.DWMY.E DSPACSTR - ACCUMACC Count: Storage Exceeded
.DWMY.E DSPACUTR - ACCUMACC Count: Threshold Exceeded
.DWMY.E DSPAIRLM - Other IRLM Request Count
.DWMY.E DSPALDAB - NO. ALTER DATABASE Statements
.DWMY.E DSPALGTM - Class 3 Accum Wait Archive Log Time
.DWMY.E DSPALLTM - DB2 Lock & Latch Time
.DWMY.E DSPALOCK - Lock Request Count
.DWMY.E DSPALTIX - Alter Index Statements
.DWMY.E DSPALTJR - Alter JAR Statements
.DWMY.E DSPALTST - Alter Stogroup Statements
.DWMY.E DSPALTTA - Alter Table Statements
.DWMY.E DSPALTTS - Alter Tablespace Statements
.DWMY.E DSPALTTX - Alter Trusted Context Statements
.DWMY.E DSPALTVW - Alter View Statements
.DWMY.E DSPAQRY - Query Request Count
.DWMY.E DSPARLCT - NO. Archive Log Suspensions
.DWMY.E DSPARLH - Wait Trace Events Latch Contention
.DWMY.E DSPASLAT - Suspend Count - Latch Conflict
.DWMY.E DSPASLMT - Limit In SUs - ASUTIME
.DWMY.E DSPASOTH - Suspend Count - Other Conflict
.DWMY.E DSPAUNLK - Unlock Request Count
.DWMY.E DSPAWBTM - Wait Time - TCP/IP LOB Material
.DWMY.E DSPAWETM - Class 3 Accum Wait Service Task Time
.DWMY.E DSPAWLTM - Accum Wait Time - Latch Contention
.DWMY.E DSPAWRTM - Class 3 Accum Wait Read Other Time
.DWMY.E DSPAWWTM - Class 3 Accum Wait Write Other Time
.DWMY.E DSPBPNX - Parallel Groups Run Cross Data Share
.DWMY.E DSPCIMW0 - No. of Immed. Sync Write I/O Buffer BP0
.DWMY.E DSPCIMW1 - No. of Immed. Sync Write I/O Buffer BP1
.DWMY.E DSPCIMW2 - No. of Immed. Sync Write I/O Buffer BP2
.DWMY.E DSPCIMW3 - No. of Immed. Sync Write I/O Buffer BP3
.DWMY.E DSPCLOSE - Close Statements
.DWMY.E DSPCLRAB - NO. Log Record Bytes Written
.DWMY.E DSPCLRN - NO. Log Records Written
.DWMY.E DSPCMTON - Comment On Statements
.DWMY.E DSPCOMM2 - Commit Phase Two Invocations
.DWMY. DSPCOST - Processing Cost
.DWMY.E DSPCPODB - CPU Time Only on a DB2 TCB
.DWMY.E DSPCPUNI - Plan Instructions
.DWMY. DSPCPUTM - Accumulated CPU Time

272 Analyzer Option for DB2 Guide

5.5 DB2 Plan Activity (DB2DSP) File

.DWMY.E DSPCPUZ1 - Accum CPU Tm Used on z/OS Spec Eng

.DWMY.E DSPCPUZ2 - CPU Tm Used in DB2 on z/OS Spec Eng
.DWMY.E DSPCP1TM - Total CP Class 1 CPU Time
.DWMY.E DSPCP2TM - Total CP Class 2 CPU Time
.DWMY.E DSPCRAL - CREATE ALIAS
.DWMY.E DSPCRCTX - Create Trusted Context Statements
.DWMY.E DSPCRDAB - Create Database Statements
.DWMY.E DSPCRINX - Create Index Statements
.DWMY.E DSPCRROL - Create Role Statements
.DWMY.E DSPCRSTG - Create Stogroup Statements
.DWMY.E DSPCRSYN - Create Synonym Statements
.DWMY.E DSPCRTAB - Create Table Statements
.DWMY.E DSPCTABS - Create Tablespace Statements
.DWMY.E DSPCWLD - Times Duplicate Concentrate Dyna Stmnts
.DWMY.E DSPCWLM - Times Matched Concentrate Dyna Stmnts
.DWMY.E DSPCWLP - Times Parsed Concentrate Dyna Stmnts
.DWMY.E DSPCWLR - Times Replaced Concentrate Dyna Stmnts
.DWMY.E DSPDEAD - Deadlock Count
.DWMY.E DSPDEFVU - Create View Statements
.DWMY.E DSPDELET - Delete Statements
.DWMY.E DSPDESC - Describe Statements
.DWMY.E DSPDGBUF - Parallel Groups to Seq Storage Short
.DWMY.E DSPDGCUR - Parallel Groups to Seq Cursor Update
.DWMY.E DSPDGESA - Parallel Groups to Seq No ESA Sort
.DWMY.E DSPDRAL - DROP ALIAS
.DWMY.E DSPDRPDB - Drop Database Statements
.DWMY.E DSPDRPIX - Drop Index Statements
.DWMY.E DSPDRPKG - NO. DROP PACKAGE Statements
.DWMY.E DSPDRPRO - Drop Role Statements
.DWMY.E DSPDRPST - Drop Stogroup Statements
.DWMY.E DSPDRPSY - Drop Synonym Statements
.DWMY.E DSPDRPTA - Drop Table Statements
.DWMY.E DSPDRPTS - Drop Tablespace Statements
.DWMY.E DSPDRPTX - Drop Trusted Context Statements
.DWMY.E DSPDRPVU - Drop View Statements
.DWMY.E DSPDSCRT - NO. DESCRIBE TABLE Statements
.DWMY.E DSPEGENC - Parallel Groups Executed Sequential
.DWMY.E DSPELGZP - Accumulated CPU Time zIIP-Eligible Work
.DWMY.E DSPELPTM - Elapsed Time
.DWMY.E DSPENTEX - NO. Entry/Exit events processed
.DWMY.E DSPET2TM - Elapsed Time in DB2
.DWMY.E DSPFETCH - Fetch Statements rel 2
.DWMY.E DSPFRIDS - Times RID List Overflowed RID Storage
.DWMY.E DSPFRIDT - Times RID List Overflowed RID Exceeded
.DWMY.E DSPGPGR0 - GETPAGE Requests BP0
.DWMY.E DSPGPGR1 - GETPAGE Requests BP1
.DWMY.E DSPGPGR2 - GETPAGE Requests BP2
.DWMY.E DSPGPGR3 - GETPAGE Requests BP3
.DWMY.E DSPGRANT - Grant Statements

Chapter 5: FILES 273

5.5 DB2 Plan Activity (DB2DSP) File

.DWMY.E DSPINCRB - Incremental Binds

.DWMY.E DSPINSRT - Insert Statements
.DWMY.E DSPIOETM - DB2 Accumulated I/O Elapsed Wait Time
.DWMY.E DSPJINCS - Times RID List Append RID Storage
.DWMY.E DSPJINCT - Times RID List Append RID Exceeded
.DWMY.E DSPLABEL - Label Statements Rel 2
.DWMY.E DSPLEEM - NO. Lock Escalations to Exclusive mode
.DWMY.E DSPLESM - NO. Lock Escalations to shared mode
.DWMY.E DSPLOCK - Lock Table Statements
.DWMY.E DSPLPF0 - No. List Prefetch Requested BP0
.DWMY.E DSPLPF1 - No. List Prefetch Requested BP1
.DWMY.E DSPLPF2 - No. List Prefetch Requested BP2
.DWMY.E DSPLPF3 - No. List Prefetch Requested BP3
.DWMY.E DSPMERGE - Merge Statements
.DWMY.E DSPMIXNL - Mult Indx Not Used - RID Limit
.DWMY.E DSPMIXNU - Mult Indx Not Used - No Storage
.DWMY.E DSPMIXU - Multiple Index Path Used
.DWMY.E DSPMXPL - Max. no. Page locks held
.DWMY.E DSPNATHD - Count of ACCUMACC Roll-up Threads
.DWMY.E DSPNOGRP - Parallel Groups Exec Planned Degree
.DWMY.E DSPNTDEL - Normal Deallocation
.DWMY.E DSPNTEND - Normal Application Ended
.DWMY.E DSPNTEOT - Normal End of Task
.DWMY.E DSPNTHRD - Count Of Threads Initiated
.DWMY.E DSPNTIFI - Normal IFI READS Request
.DWMY.E DSPNTNUS - Normal New User
.DWMY.E DSPNTSUS - Normal Same User Partial Signon
.DWMY.E DSPOPEN - Open Statements
.DWMY.E DSPORNO - Parallel Groups Executed Coordination
.DWMY.E DSPORR - Parallel Groups Executed Repeat-read
.DWMY.E DSPPCWDP - Duplicate Per Parsed Dyna Stmnts
.DWMY.E DSPPCWMP - Matched Per Parsed Dyna Stmnts
.DWMY.E DSPPCWRP - Replaced Per Parsed Dyna Stmnts
.DWMY.E DSPPELPT - Parallel Subtasks Elapsed Time
.DWMY.E DSPPET2T - Parallel Subtasks Elapsed Time in DB2
.DWMY.E DSPPGDTT - Parallel GPS Using UDF - Ex. Single DB2
.DWMY.E DSPPREP - Prepare Statements
.DWMY.E DSPPRFH0 - Prefetch Read Requests Buffer BP0
.DWMY.E DSPPRFH1 - Prefetch Read Requests Buffer BP1
.DWMY.E DSPPRFH2 - Prefetch Read Requests Buffer BP2
.DWMY.E DSPPRFH3 - Prefetch Read Requests Buffer BP3
.DWMY.E DSPPSTCT - Parallel Subtasks Count
.DWMY.E DSPQUERY - Fetch and Select Statements
.DWMY.E DSPRDGRP - Parallel Groups Reduced Storage Short
.DWMY.E DSPRDLTD - Deleted Rows
.DWMY.E DSPREVOK - Revoke Statements
.DWMY.E DSPRFCHD - Fetched Rows
.DWMY.E DSPRLFDP - Query Parallelism Disabled by RLF
.DWMY. DSPRNIX - Rename Index Statements

274 Analyzer Option for DB2 Guide

5.5 DB2 Plan Activity (DB2DSP) File

.DWMY.E DSPRNKCL - No. Wait Trace Glbl Cont. Child LLock

.DWMY.E DSPRNMOL - No. Wait Trace Glbl Cont. Other LLock
.DWMY.E DSPRNNPL - No. Wait Trace Glbl Cont. PP PLock
.DWMY.E DSPRNOPL - No. Wait Trace Glbl Cont. PG PLock
.DWMY.E DSPRNQOL - No. Wait Trace Glbl Cont. Other PLock
.DWMY.E DSPRNSTD - Inserted Rows
.DWMY.E DSPRPOP1 - Parallel GPS Reformatted - Sysplx Conf
.DWMY.E DSPRPOP2 - Parallel GPS Reformatted - Buffer Resrc
.DWMY.E DSPRRAIC - Commit Specified for RRSAF Thread
.DWMY.E DSPRUDTD - Updated Rows
.DWMY.E DSPSCIMW - Total Immed. Sync Write I/Os Count
.DWMY.E DSPSDPF - Total Dynamic Prefetch Requests
.DWMY.E DSPSELCT - Select Statements Rel 2
.DWMY.E DSPSETHV - NO. SET HOST-VAR Statements
.DWMY.E DSPSGPGR - Total GETPAGE Requests
.DWMY.E DSPSHPG - Total Pages HPOOL to VPOOL Prefetch
.DWMY.E DSPSHRE - Total Pages HPOOL to VPOOL Prefetch
.DWMY.E DSPSHRF - Total Unsucc. Read Req Expanded Stg
.DWMY.E DSPSHWF - Total Unsucc. Write Req Expanded Stg
.DWMY.E DSPSHWR - Total Sync Req Move Pge VPOOL to HPOOL
.DWMY.E DSPSKIP - Parallel Coordination Bypass DB2
.DWMY.E DSPSLPF - Total Times List Prefetch Requested
.DWMY.E DSPSMIAP - Times RID List Retrieval Skipped
.DWMY.E DSPSNGT - Total Times GETPAGE Req Not Satisfied
.DWMY.E DSPSPCTM - Accum CPU Time SQL Procedures Main Unit
.DWMY.E DSPSPRFH - Total Times List Prefetch Requested
.DWMY.E DSPSPRU0 - System Page Record Update BP0
.DWMY.E DSPSPRU1 - System Page Record Update BP1
.DWMY.E DSPSPRU2 - System Page Record Update BP2
.DWMY.E DSPSPRU3 - System Page Record Update BP3
.DWMY.E DSPSPZET - Total Elapsed Time on zIIP Stored Proc.
.DWMY.E DSPSPZTM - CPU Tm Exec Strd Proc on z/OS Spec Eng
.DWMY.E DSPSQLID - NO. Of Set Current SQLID
.DWMY.E DSPSRIO0 - Synchronous Read I/Os BP0
.DWMY.E DSPSRIO1 - Synchronous Read I/Os BP1
.DWMY.E DSPSRIO2 - Synchronous Read I/Os BP2
.DWMY.E DSPSRIO3 - Synchronous Read I/Os BP3
.DWMY.E DSPSSIO - Total Async Pages Read by Prefetch
.DWMY.E DSPSSPRU - Total System Page Record Update
.DWMY.E DSPSSRIO - Total Synchronous Read I/Os
.DWMY.E DSPSUSP - Suspend Count
.DWMY.E DSPTCBTM - TCB Time
.DWMY.E DSPTC2TM - Class 2 Accumulated TCB Time in DB2
.DWMY.E DSPTELPT - Comprehensive Elapsed Time
.DWMY.E DSPTET2T - Comprehensive Elapsed Time in DB2
.DWMY.E DSPTHINA - DDF Thread Becomes Inactive
.DWMY.E DSPTHIN2 - Type 2 Inactive Thread Becomes Inactive
.DWMY.E DSPTIMO - Timeout Count
.DWMY.E DSPTOGRP - Parallel Groups Executed

Chapter 5: FILES 275

5.5 DB2 Plan Activity (DB2DSP) File

.DWMY.E DSPTRTBL - Truncate Table Statements

.DWMY.E DSPTRTZP - CPU Tm Exec Triggers on z/OS Spec Eng
.DWMY.E DSPTSQLE - Number of SQL Statements Executed
.DWMY.E DSPUPDTE - Update Statements
.DWMY.E DSPWATRB - Wt Trace for TCP/IP LOB Material
.DWMY.E DSPWATRL - NO. Wait Trace Events for Lock/Latch
.DWMY.E DSPWATRR - NO. Wait Trace Events for Read Other
.DWMY.E DSPWATRW - NO. Wait Trace Events for Write Other
.DWMY.E DSPWATSE - NO. Wait Trace Events for Sync. Exec.
.DWMY.E DSPWATTR - NO. Wait Trace events processed
.DWMY.E DSPWGLTM - Glbl Contention PG P-Lock Wait Time
.DWMY.E DSPWLCTM - Glbl Contention Child L-Lock Wait Time
.DWMY.E DSPWLLTM - Glbl Contention Other L-Locks Wait Time
.DWMY.E DSPWLPTM - Glbl Contention PP P-Lock Wait Time
.DWMY.E DSPWTOTM - Glbl Contention Other P-Locks Wait Time
.DWMY.E DSPWUABD - Work In Doubt Abend
.DWMY.E DSPWUEOM - Work In Doubt End of Memory
.DWMY.E DSPWUFRC - Work In Doubt Force Command
.DWMY.E DSPWURIN - Work In Doubt Resolve Indoubt
.DWMY.E DSPXSODB - DB2 Only and Non zIIP-Eligible CPU Time
.DWMY.E DSPXSPTM - CPU Time Excluding Special CPU Time

Maximum Data Elements

.DWMY.E DSPAPREC - How Limit Was Determined

.DWMY.E DSPMALCT - Max Archive Log Suspensions
.DWMY.E DSPMCHG - Max Change Lock Requests
.DWMY.E DSPMDEAD - Max Deadlocks
.DWMY.E DSPMELPT - Max Elapsed Time Acct. Class 1
.DWMY.E DSPMEL2T - Max Elapsed Time Acct. Class 2
.DWMY.E DSPMENTX - Max Entry/Exits
.DWMY.E DSPMGPG0 - Max BP0 GETPAGE Requests 0
.DWMY.E DSPMGPG1 - Max BP1 GETPAGE Requests 1
.DWMY.E DSPMGPG2 - Max BP2 GETPAGE Requests 2
.DWMY.E DSPMGPG3 - Max BP3 GETPAGE Requests 3
.DWMY.E DSPMIOTM - Max I/O Elapsed Wait Time in DB2
.DWMY.E DSPMIRLM - Max IRLM Lock Requests
.DWMY.E DSPMLEEM - Max Escalate to Exclusive Lock
.DWMY.E DSPMLESM - Max Escalate to Shared Lock
.DWMY.E DSPMLGTM - Max Class 3 Accum Wait Archive Log Time
.DWMY.E DSPMLLTM - Max Lock Latch Time Class 3
.DWMY.E DSPMLOCK - Max Lock Requests
.DWMY.E DSPMLPF0 - Max BP0 List Prefetch Read Requests 0
.DWMY.E DSPMLPF1 - Max BP1 List Prefetch Read Requests 1
.DWMY.E DSPMLPF2 - Max BP2 List Prefetch Read Requests 2
.DWMY.E DSPMLPF3 - Max BP3 List Prefetch Read Requests 3
.DWMY.E DSPMMXPL - Max Max Concur. Page Locks/Plan
.DWMY.E DSPMPFR0 - Max BP0 Seq. Prefetch Read Requests 0
.DWMY.E DSPMPFR1 - Max BP1 Seq. Prefetch Read Requests 1

276 Analyzer Option for DB2 Guide

5.5 DB2 Plan Activity (DB2DSP) File

.DWMY.E DSPMPFR2 - Max BP2 Seq. Prefetch Read Requests 2

.DWMY.E DSPMPFR3 - Max BP3 Seq. Prefetch Read Requests 3
.DWMY.E DSPMQRY - Max Query Requests
.DWMY.E DSPMSDPF - Max Times Dynamic Prefetch Requested
.DWMY.E DSPMSGPG - Max GETPAGE Requests
.DWMY.E DSPMSHPG - Max Pages HPOOL to VPOOL Prefetch
.DWMY.E DSPMSHRE - Max Sync Req Move Pge HPOOL to VPOOL
.DWMY.E DSPMSHRF - Max Unsucc. Read Req Expanded Stg
.DWMY.E DSPMSHWF - Max Unsucc. Write Req Expanded Stg
.DWMY.E DSPMSHWR - Max Sync Req Move Pge VPOOL to HPOOL
.DWMY.E DSPMSLAT - Max Latch Suspends
.DWMY.E DSPMSLPF - Max Times List Prefetch Requested
.DWMY.E DSPMSNGT - Max Times GETPAGE Req Not Satisfied
.DWMY.E DSPMSOTH - Max Other Suspends
.DWMY.E DSPMSPFR - Max Prefetch Read Requests
.DWMY.E DSPMSPU0 - Max BP0 System Pages Updated 0
.DWMY.E DSPMSPU1 - Max BP1 System Pages Updated 1
.DWMY.E DSPMSPU2 - Max BP2 System Pages Updated 2
.DWMY.E DSPMSPU3 - Max BP3 System Pages Updated 3
.DWMY.E DSPMSRD0 - Max BP0 Sync. Read I/O Requests 0
.DWMY.E DSPMSRD1 - Max BP1 Sync. Read I/O Requests 1
.DWMY.E DSPMSRD2 - Max BP2 Sync. Read I/O Requests 2
.DWMY.E DSPMSRD3 - Max BP3 Sync. Read I/O Requests 3
.DWMY.E DSPMSSIO - Max Async Pages Read by Prefetch
.DWMY.E DSPMSSPU - Max System Page Record Update
.DWMY.E DSPMSSRD - Max Synchronous Read I/Os
.DWMY.E DSPMSSWR - Max Immediate Sync Write I/O
.DWMY.E DSPMSUSP - Max Suspensions
.DWMY.E DSPMSWR0 - Max BP0 Sync. Write I/O Requests 0
.DWMY.E DSPMSWR1 - Max BP1 Sync. Write I/O Requests 1
.DWMY.E DSPMSWR2 - Max BP2 Sync. Write I/O Requests 2
.DWMY.E DSPMSWR3 - Max BP3 Sync. Write I/O Requests 3
.DWMY.E DSPMTCBT - Max TCB Time Acct. Class 1
.DWMY.E DSPMTC2T - Max TCB Time Acct. Class 2
.DWMY.E DSPMTIMO - Max Timeouts
.DWMY.E DSPMWATR - Max Wait Trace Events / Plan
.DWMY.E DSPMWETM - Max Class 3 Accum Wait Serv. Task Time
.DWMY.E DSPMWRTM - Max Class 3 Accum Wait Read Other Time
.DWMY. DSPMWTRL - Max Wait Trace Events for Lock/Latch
.DWMY. DSPMWTRR - Max Wait Trace Events for Read Other
.DWMY. DSPMWTRW - Max Wait Trace Events for Write Other
.DWMY. DSPMWTSE - Max Wait Trace Events for Sync. Exec.
.DWMY.E DSPMWWTM - Max Class 3 Accum Wait Write Other Time
.DWMY.E DSPMXDEG - Max Degree of Parallelism
.DWMY.E DSPMXXST - Max CPU Time Excluding Special CPU Time
.DWMY.E DSPMXZET - Max CPU Time zIIP-Eligible Work
.DWMY.E DSPMXZP1 - Max CPU Tm Used on z/OS Spec Eng
.DWMY.E DSPMXZP2 - Max CPU Tm Used in DB2 on z/OS Spec Eng
.DWMY.E DSPMXZTT - Max CPU Tm Exec Trgrs on z/OS Spec Eng

Chapter 5: FILES 277

5.5 DB2 Plan Activity (DB2DSP) File

5.5.3 Usage Considerations

This section identifies any special considerations or
techniques related to using the DB2DSP file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

The examples use a SAS macro to specify the DD name part of

the CA MICS file name. These macros are a standard part of CA
MICS and are available for all files. The macro name has the
form _iiit, where "iii" is the information area name and "t"
is the timespan. In addition, many of the examples use the
_fffSUM macro, where "fff" is the file identifier, to
summarize the data as indicated by the _BY and _BREAK macro
definitions.

Special Considerations/Techniques

1. Be careful when using the special date and time data

elements contained in each CA MICS file. As the file's
granularity increases in higher timespans, certain
fields loose significance and should not be referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. The data elements STARTTS and ENDTS have different

meanings when used in the DETAIL timespan versus their
meaning in the DAYS, WEEKS, MONTHS, and YEARS timespans.
The ENDTS and STARTTS, when appearing in the DAYS,
WEEKS, MONTHS, and YEARS timespans, indicate the span of
time over which the data has been summarized. STARTTS
indicates the lowest date and time, and ENDTS indicates
the greatest date and time for the summarized data.

Retrieval Examples

1. List all PLANs used yesterday and give the user ID that
invoked it.

DATA TEST1;
SET _DB2D.DB2DSP01
;
YESTRDY=DATE()-1;
IF DATEPART(ENDTS)=YESTRDY;
MACRO _BY DSPPLAN DB2AUTH %

278 Analyzer Option for DB2 Guide

5.6 DB2 System Activity Suspend (DB2_DS) File

MACRO _BREAK DB2AUTH %

PROC SORT DATA=TEST1 OUT=TEST1; BY _BY;
DATA TEST1;
SET TEST1;
_DSPSUM;
PROC PRINT DATA=TEST1; BY DSPPLAN;
VAR PLNAUTH;
TITLE YESTERDAYS USERS BY DB2 PLAN;

2. Print the TCB time for each plan used last month.

DATA TEST2;
SET _DB2M.DB2DSP01;
IF DSPTCBTM>0 ;
MACRO _BY DSPPLAN %
MACRO _BREAK DSPPLAN %
PROC SORT DATA=TEST2 OUT=TEST2; BY _BY;
DATA TEST2;
SET TEST2;
_DSPSUM;
PROC PRINT DATA=TEST2;
VAR PLNPLAN DSPTCBTM ;
TITLE TCB TIME BY PLAN;

5.6 DB2 System Activity Suspend (DB2_DS) File

FILENAME=DB2_DS01

The DB2_DS System Activity Suspend file maintains the last

Systems Services interval record produced by a DB2 system.
Suspend file records are used to obtain the true observation
values of the first record processed during the next daily
execution of CA MICS only when the first record processed is
not the first record produced by a DB2 system.

The DB2_DS File is a permanent file of the CA MICS DB2

Analyzer. It is strictly for internal use and exists only
at the DETAIL timespan.

Chapter 5: FILES 279

5.7 DB2 Data Base Activity Suspend (DB2_DD) File

FILENAME=DB2_DD01

The DB2_DD Data Base Activity Suspend file maintains the last
Data Base Services interval record produced by a DB2 system.
Suspend file records are used to obtain the true observation
values of the first record processed during the next daily
execution of CA MICS only when the first record processed is
not the first record produced by a DB2 system.

The DB2_DD File is a permanent file of the CA MICS DB2

Analyzer. It is strictly for internal use and exists only
at the DETAIL timespan.

5.8 DB2 System DDF Statistics (DB2DDY) File

FILENAME=DB2DDYxx

The DB2 System DDF Statistics file maintains DB2 system DDF
activity data including location, transactions, commits,
bytes sent and SQL statements sent. This file is derived
from the SMF DB2 record type 100 subtype 0. This file exists
in the DETAIL, DAYS, WEEKS, MONTHS, and YEARS timespans.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Element List
3 - Usage Considerations

280 Analyzer Option for DB2 Guide

5.8 DB2 System DDF Statistics (DB2DDY) File

5.8.1 File Organization

NOTE: The time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS system
at your installation.

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-5. DB2DDY Time-Span Granularity Chart

Chapter 5: FILES 281

5.8 DB2 System DDF Statistics (DB2DDY) File

5.8.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

GENERATION DATE: Tue, May 12, 2009

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

XD....E DAY - Day of Month

XDWMY.E DB2ID - DB2 ID
XDWMY.E DB2RLOCN - DDF Remote Location ID
XDWMY.E DB2THDTY - DB2 Thread Type
XDW...E HOUR - Hour of Day
XDWM..E MONTH - Month of Year
XDWMY.E SYSID - System Identifier
XDW...E WEEK - Week of Year
XDWMY.E YEAR - Year of Century

282 Analyzer Option for DB2 Guide

5.8 DB2 System DDF Statistics (DB2DDY) File

XDWMY.E ZONE - Time Zone

Common Data Elements

XD....E DAYNAME - Name of Day of Week

X..... DB2ACE - DB2 Agent Control Element
X..... DB2ATNM - Active Trace Number Mask
XDWMY.E DB2DSGN - Data Sharing Group Name
X..... DB2DSTSN - Destination Sequence Number
X.....E DB2ISEQ - Instrumentation Sequence Number
XDWMY.E DB2LOCN - DB2 Local Location ID
XDWMY.E DB2MEMN - DB2 Member Name
XDWMY.E DB2MLVL - MICS DB2 Maintenance Level
X.....E DB2RELN - DB2 Release Number
X..... DB2STCK - DB2 Store Clock At End Event
XDWMY.E DURATION - Recording Interval Time
XDWMY.E ENDTS - End Time Stamp
XDWMY.E MICSVER - CA MICS Version Number
XDWMY.E STARTTS - Start Time Stamp

Accumulated Data Elements

XDWMY.E DDYABRR - DDF Abort Reqs Recvd From Remote

XDWMY.E DDYABRS - DDF Abort Reqs Sent To Remote
XDWMY.E DDYBRBF - DDF Blk Recv Using Blk Fetch
XDWMY.E DDYBROW - DDF Rows In Buf for Blk Fetch
XDWMY.E DDYBTBF - DDF Blk Sent Using Blk Fetch
XDWMY.E DDYBYTR - DDF Bytes Recvd From Remote
XDWMY.E DDYBYTS - DDF Bytes Sent To Remote
XDWMY.E DDYCBLB - DDF Switch Cont To Limited
XDWMY.E DDYCNVQ - DDF Conv Req Queued Waiting Alloc
XDWMY.E DDYCNVR - DDF Convs Recvd From Remote
XDWMY.E DDYCNVS - DDF Convs Sent To Remote
XDWMY.E DDYCOMR - DDF COMMIT Reqs Recvd From Remote
XDWMY.E DDYCOMS - DDF COMMIT Reqs Sent To Remote
XDWMY.E DDYMSGR - DDF Messages Recvd From Remote
XDWMY.E DDYMSGS - DDF Messages Sent To Remote
XDWMY.E DDYNTHRD - DDF SMF 100 QLST Segment Count
XDWMY.E DDYRBND - DDF SQL Bound for Remote
XDWMY.E DDYROWR - DDF Rows Recvd From Remote
XDWMY.E DDYROWS - DDF Rows Sent To Remote
XDWMY.E DDYSQLR - DDF SQL Stmts Recvd From Remote
XDWMY.E DDYSQLS - DDF SQL Stmts Sent To Remote
XDWMY.E DDYTRNR - DDF Trans Recvd From Remote
XDWMY.E DDYTRNS - DDF Trans Sent To Remote

Maximum Data Elements

XDWMY.E DDYMABRR - Max DDF Abort Req Recvd From Remote

Chapter 5: FILES 283

5.8 DB2 System DDF Statistics (DB2DDY) File

XDWMY.E DDYMABRS - Max DDF Abort Req Sent To Remote

XDWMY.E DDYMBRBF - Max DDF Blk Recv Using Blk Fetch
XDWMY.E DDYMBROW - Max DDF Rows In Buf for Blk Fetch
XDWMY.E DDYMBTBF - Max DDF Blk Sent Using Blk Fetch
XDWMY.E DDYMBYTR - Max DDF Bytes Recvd From Remote
XDWMY.E DDYMBYTS - Max DDF Bytes Sent To Remote
XDWMY.E DDYMCBLB - Max DDF Switch Cont To Limited
XDWMY.E DDYMCNVQ - Max DDF Conversations Queued
XDWMY.E DDYMCNVR - Max DDF Convers Recvd From Remote
XDWMY.E DDYMCNVS - Max DDF Convers Sent to Remote
XDWMY.E DDYMCOMR - Max DDF Commit Req Recvd From Remote
XDWMY.E DDYMCOMS - Max DDF Commit Req Sent To Remote
XDWMY.E DDYMMSGR - Max DDF Messages Recvd From Remote
XDWMY.E DDYMMSGS - Max DDF Messages Sent To Remote
XDWMY.E DDYMRBND - Max DDF SQL Bound for Remote
XDWMY.E DDYMROWR - Max DDF Data Rows Recvd From Remote
XDWMY.E DDYMROWS - Max DDF Data Rows Sent to Remote
XDWMY.E DDYMSQLR - Max DDF SQL Stmts Recvd From Remote
XDWMY.E DDYMSQLS - Max DDF SQL Stmts Sent to Remote
XDWMY.E DDYMTRNR - Max DDF Trans Recvd From Remote
XDWMY.E DDYMTRNS - Max DDF Trans Sent To Remote

284 Analyzer Option for DB2 Guide

5.8 DB2 System DDF Statistics (DB2DDY) File

5.8.3 Usage Considerations

This section identifies any special considerations or
techniques related to using the DB2DDY file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the information area
name and "t" is the time-span. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier, to summarize the data as indicated by the &BY and
&BREAK macro variables.

Special Considerations/Techniques

1. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher time-spans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. The data elements STARTTS and ENDTS have different

Retrieval Examples

1. List DDF activity for yesterday by DB2 subsystem id.

DATA TEST1;
SET &DB2D.DB2DDY01
;
YESTRDY=DATE()-1;
IF DATEPART(ENDTS)=YESTRDY;

Chapter 5: FILES 285

5.8 DB2 System DDF Statistics (DB2DDY) File

RUN;

%LET BY = SYSID DB2ID;

%LET BREAK = DB2ID ;
PROC SORT DATA=TEST1 OUT=TEST1; BY &BY; RUN;

DATA TEST1;
SET TEST1;
%DDYSUM;

PROC PRINT DATA=TEST1; BY DB2ID;

VAR DB2 ID DDYBYTS DDYBYTR DDYCNVS DDYCNVR;
TITLE YESTERDAYS DDF ACTIVITY BY DB2 SUBSYSTEM ID; RUN;

2. Print the maximum bytes transmitted for any DB2 system

processing a DDF request for last month.

DATA TEST2;
SET &DB2M.DB2DDY01;
IF DDYMBYTS>0 OR DDYMBYTR>0;

%LET BY = SYSID DB2ID;

%LET BREAK = DB2ID;

PROC SORT DATA=TEST2 OUT=TEST2; BY _BY;

DATA TEST2;
SET TEST2;
%DDYSUM;

PROC PRINT DATA=TEST2;

VAR DB2ID DDYMBYTS DDYMBYTR;
TITLE MAXIMUM BYTES SENT/RECEIVED BY DB2 DDF SUBSYSTEM;

286 Analyzer Option for DB2 Guide

5.9 DB2 User DDF Activity (DB2DDU) File

FILENAME=DB2DDUxx

The DB2 User DDF Activity file maintains DB2 DDF Accounting
data, including remote location, SQL statements
sent/received, and bytes sent/received. This file is derived
from the SMF DB2 record type 101. This file exists in the
DAYS, WEEKS, MONTHS, and YEARS timespans.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Element List
3 - Usage Considerations

Chapter 5: FILES 287

5.9 DB2 User DDF Activity (DB2DDU) File

5.9.1 File Organization

The table below identifies data elements by which the file is
sequenced and summarized in each time-span. "N/A" indicates
that the file is not supported in a time-span.

NOTE: The time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS system
at your installation.

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-6. DB2DDU Time-Span Granularity Chart

288 Analyzer Option for DB2 Guide

5.9 DB2 User DDF Activity (DB2DDU) File

5.9.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

.D....E DAY - Day of Month

.DWMY.E DB2ACT1 - AUTHORIZATION ID
......E DB2ACT2 - CORRELATION ID
.DWMY.E DB2ACT3 - CONNECTION ID
.DWMY.E DB2ACT4 - DISTRIBUTED THREAD TYPE
.DWMY.E DB2ID - DB2 ID
.DWMY.E DB2RLOCN - DDF Remote Location ID
.DWMY.E DB2THDTY - DB2 Thread Type
.DW...E HOUR - Hour of Day
.DWM..E MONTH - Month of Year
.DWMY.E SYSID - System Identifier
.DW...E WEEK - Week of Year

Chapter 5: FILES 289

5.9 DB2 User DDF Activity (DB2DDU) File

.DWMY.E YEAR - Year of Century

.DWMY.E ZONE - Time Zone

Common Data Elements

.D....E DAYNAME - Name of Day of Week

......E DB2ACE - DB2 Agent Control Element
......E DB2ATNM - Active Trace Number Mask
.DWMY.E DB2AUTH - Authorization Identifier
.DWMY.E DB2CONN - Connection Identifier
.DWMY.E DB2CORR - Correlation Identifier
.DWMY.E DB2DDFCT - DDF DB2 Commits Received from Remote
.DWMY.E DB2DSGN - Data Sharing Group Name
......E DB2DSTSN - Destination Sequence Number
......E DB2ISEQ - Instrumentation Sequence Number
.DWMY.E DB2LOCN - DB2 Local Location ID
.DWMY. DB2LUNAM - Logical Unit NAME
.DWMY.E DB2MEMN - DB2 Member Name
.DWMY.E DB2MLVL - MICS DB2 Maintenance Level
.DWMY. DB2NETID - Network ID
......E DB2OPID - Original Operator ID
......E DB2PLAN - Plan Name
......E DB2RELN - DB2 Release Number
.DWMY.E DB2REQID - DB2 Requestor Location ID
......E DB2STCK - DB2 Store Clock At End Event
...... DB2UNIQ - DB2 Instance Number
.DWMY.E ENDTS - End Time Stamp
.DWMY.E MICSVER - CA MICS Version Number
.DWMY.E STARTTS - Start Time Stamp

Retained Data Elements

.DWMY.E DDUFLGS - DDF Type of Protocol

.DWM..E DDUPRID - DDF Product ID of Remote Location
.DWM..E DDUPRIDR - DDF Product ID of Remote Location
.DWMY.E DDURUQL - DDF Roll Up Flag
.DWMY.E DDUSRQL - DDF Summary Roll Up Flag
Accumulated Data Elements

.DWMY.E DDUABRR - DDF Abort Reqs Recvd From Remote

.DWMY.E DDUABRS - DDF Abort Reqs Sent To Remote
.DWMY.E DDUBRBF - DDF Received Blocks - Block Fetch
.DWMY.E DDUBROW - DDF Rows in Buffer - Block Fetch
.DWMY.E DDUBTBF - DDF Transmit Blocks - Block Fetch
.DWMY.E DDUBYTR - DDF Bytes Recvd From Remote
.DWMY.E DDUBYTS - DDF Bytes Sent To Remote
.DWMY.E DDUCBLB - DDF Switch Continuous to Limited
.DWMY.E DDUCIEL - DDF Max. Conversations Open
.DWMY.E DDUCNVA - DDF Successful Conversations

290 Analyzer Option for DB2 Guide

5.9 DB2 User DDF Activity (DB2DDU) File

.DWMY.E DDUCNVQ - DDF Conv Req Queued Waiting Alloc

.DWMY.E DDUCNVR - DDF Convs Recvd From Remote
.DWMY.E DDUCNVS - DDF Convs Sent To Remote
.DWMY.E DDUCNVT - DDF Conversations Terminated
.DWMY.E DDUCOMR - DDF COMMIT Reqs Recvd From Remote
.DWMY.E DDUCOMS - DDF COMMIT Reqs Sent To Remote
.DWMY.E DDUCPUR - DDF DBAT CPU Reported To Requestor
.DWMY.E DDUELPL - DDF Local Elapsed Time
.DWMY.E DDUELPR - DDF Remote Elapsed Time
.DWMY.E DDUMDWTM - DDF Wat Tm DB Agent Due Max DBATs
.DWMY.E DDUMSGR - DDF Messages Recvd From Remote
.DWMY.E DDUMSGS - DDF Messages Sent To Remote
.DWMY.E DDUNTHRD - DDF SMF 101 QLAC Segment Count
.DWMY.E DDURBND - DDF Bound SQL for Remote
.DWMY.E DDUROWR - DDF Rows Recvd From Remote
.DWMY.E DDUROWS - DDF Rows Sent To Remote
.DWMY.E DDUSQLR - DDF SQL Stmts Recvd From Remote
.DWMY.E DDUSQLS - DDF SQL Stmts Sent To Remote
.DWMY.E DDUTRNR - DDF Trans Recvd From Remote
.DWMY.E DDUTRNS - DDF Trans Sent To Remote

Maximum Data Elements

.DWMY.E DDUMABRR - Max DDF Aborts Received

.DWMY.E DDUMABRS - Max DDF Aborts Sent
.DWMY.E DDUMBRBF - Max DDF Received Blocks - Block Fetch
.DWMY.E DDUMBROW - Max DDF Rows in Buffer - Block Fetch
.DWMY.E DDUMBTBF - Max DDF Transmit Blocks - Block Fetch
.DWMY.E DDUMBYTR - Max DDF Bytes Received
.DWMY.E DDUMBYTS - Max DDF Bytes Sent
.DWMY.E DDUMCBLB - Max DDF Switch Continuous to Limited
.DWMY.E DDUMCIEL - Max DDF Conversations Open
.DWMY.E DDUMCNVA - Max DDF Successful Conversations
.DWMY.E DDUMCNVQ - Max DDF Conversations Queued
.DWMY.E DDUMCNVR - Max DDF Conversations Received
.DWMY.E DDUMCNVS - Max DDF Requestor Conversations
.DWMY.E DDUMCNVT - Max DDF Conversations Terminated
.DWMY.E DDUMCOMR - Max DDF Commits Received
.DWMY.E DDUMCOMS - Max DDF Commits Sent
.DWMY.E DDUMCPUR - Max DDF DBAT CPU Reported To Requestor
.DWMY.E DDUMELPL - Max DDF Local Elapsed Time
.DWMY.E DDUMELPR - Max DDF Remote Elapsed Time
.DWMY.E DDUMMSGR - Max DDF Messages Received
.DWMY.E DDUMMSGS - Max DDF Messages Sent
.DWMY.E DDUMRBND - Max DDF Bound SQL for Remote
.DWMY.E DDUMROWR - Max DDF Rows Received
.DWMY.E DDUMROWS - Max DDF Rows Sent
.DWMY.E DDUMSQLR - Max DDF SQL Stmts Received
.DWMY.E DDUMSQLS - Max DDF SQL Stmts Sent

Chapter 5: FILES 291

5.9 DB2 User DDF Activity (DB2DDU) File

5.9.3 Usage Considerations

This section identifies any special considerations or
techniques related to using the DB2DDU file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

In the examples, we use a SAS macro to specify the DD name

Special Considerations/Techniques

1. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher time-spans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. The data elements STARTTS and ENDTS have different

Retrieval Examples

1. List DDF activity for yesterday by DB2 user.

DATA TEST1;
SET &DB2D.DB2DDU01
;
YESTRDY=DATE()-1;
IF DATEPART(ENDTS)=YESTRDY;

292 Analyzer Option for DB2 Guide

5.9 DB2 User DDF Activity (DB2DDU) File

RUN;

%LET BY = DB2AUTH;
%LET BREAK = DB2AUTH;
PROC SORT DATA=TEST1 OUT=TEST1; BY &BY; RUN;

DATA TEST1;
SET TEST1;
%DDUSUM;

PROC PRINT DATA=TEST1; BY DB2ID;

VAR DB2AUTH DDUBYTS DDUBYTR DDUCNVS DDUCNVR;
TITLE YESTERDAYS DDF ACTIVITY BY DB2 USER; RUN;

2. Print the maximum bytes transmitted for any DB2 user

requesting DDF access.

DATA TEST2;
SET &DB2M.DB2DDU01;
IF DDUMBYTS>0 OR DDUMBYTR>0;

%LET BY = DB2AUTH;
%LET BREAK = DB2AUTH;

PROC SORT DATA=TEST2 OUT=TEST2; BY _BY;

DATA TEST2;
SET TEST2;
%DDUSUM;

PROC PRINT DATA=TEST2;

VAR DB2AUTH DDUMBYTS DDUMBYTR;
TITLE MAXIMUM BYTES SENT/RECEIVED BY DB2 USER;

Chapter 5: FILES 293

5.10 DB2 Plan DDF Activity (DB2DDP) File

FILENAME=DB2DDPxx

The DB2 Plan DDF Activity file maintains the same DB2
Accounting data as the DB2DDU file but organizes it by DB2
Plan (application). This file is derived from the SMF DB2
record type 101. This file exists in the DAYS, WEEKS,
MONTHS, and YEARS timespans.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Element List
3 - Usage Considerations

294 Analyzer Option for DB2 Guide

5.10 DB2 Plan DDF Activity (DB2DDP) File

5.10.1 File Organization

The table below identifies data elements by which the file is
sequenced and summarized in each time-span. "N/A" indicates
that the file is not supported in a time-span.

NOTE: The time-spans in which a file is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS system
at your installation.

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-7. DB2DDP Time-Span Granularity Chart

Chapter 5: FILES 295

5.10 DB2 Plan DDF Activity (DB2DDP) File

5.10.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

.D....E DAY - Day of Month

.DWMY.E DB2CONN - Connection Identifier
.DWMY.E DB2ID - DB2 ID
.DWMY.E DB2PLAN - Plan Name
.DWMY.E DB2RLOCN - DDF Remote Location ID
.DWMY.E DB2THDTY - DB2 Thread Type
.DW...E HOUR - Hour of Day
.DWM..E MONTH - Month of Year
.DWMY.E SYSID - System Identifier
.DW...E WEEK - Week of Year
.DWMY.E YEAR - Year of Century

296 Analyzer Option for DB2 Guide

5.10 DB2 Plan DDF Activity (DB2DDP) File

.DWMY.E ZONE - Time Zone

Common Data Elements

.D....E DAYNAME - Name of Day of Week

...... DB2ACE - DB2 Agent Control Element
...... DB2ATNM - Active Trace Number Mask
...... DB2AUTH - Authorization Identifier
...... DB2CORR - Correlation Identifier
.DWMY.E DB2DDFCT - DDF DB2 Commits Received from Remote
.DWMY.E DB2DSGN - Data Sharing Group Name
...... DB2DSTSN - Destination Sequence Number
...... DB2ISEQ - Instrumentation Sequence Number
.DWMY. DB2LOCN - DB2 Local Location ID
.DWMY. DB2LUNAM - Logical Unit NAME
.DWMY.E DB2MEMN - DB2 Member Name
.DWMY.E DB2MLVL - MICS DB2 Maintenance Level
.DWMY. DB2NETID - Network ID
...... DB2OPID - Original Operator ID
......E DB2RELN - DB2 Release Number
.DWMY. DB2REQID - DB2 Requestor Location ID
...... DB2STCK - DB2 Store Clock At End Event
...... DB2UNIQ - DB2 Instance Number
.DWMY.E ENDTS - End Time Stamp
.DWMY.E MICSVER - CA MICS Version Number
.DWMY.E STARTTS - Start Time Stamp

Retained Data Elements

.DWM..E DDPPRID - DDF Product ID of Remote Location

.DWM..E DDPPRIDR - DDF Product ID of Remote Location
.DWMY.E DDPRUQL - DDF Roll Up Flag
.DWMY.E DDPSRQL - DDF Summary Roll Up Flag

Accumulated Data Elements

.DWMY.E DDPABRR - DDF Abort Reqs Recvd From Remote

.DWMY.E DDPABRS - DDF Abort Reqs Sent To Remote
.DWMY.E DDPBRBF - DDF Received Blocks - Block Fetch
.DWMY.E DDPBROW - DDF Rows in Buffer - Block Fetch
.DWMY.E DDPBTBF - DDF Transmit Blocks - Block Fetch
.DWMY.E DDPBYTR - DDF Bytes Recvd From Remote
.DWMY.E DDPBYTS - DDF Bytes Sent To Remote
.DWMY.E DDPCBLB - DDF Switch Continuous to Limited
.DWMY.E DDPCIEL - DDF Max. Conversations Open
.DWMY.E DDPCNVA - DDF Successful Conversations
.DWMY.E DDPCNVQ - DDF Conv Req Queued Waiting Alloc
.DWMY.E DDPCNVR - DDF Convs Recvd From Remote
.DWMY.E DDPCNVS - DDF Convs Sent To Remote

Chapter 5: FILES 297

5.10 DB2 Plan DDF Activity (DB2DDP) File

.DWMY.E DDPCNVT - DDF Conversations Terminated

.DWMY.E DDPCOMR - DDF COMMIT Reqs Recvd From Remote
.DWMY.E DDPCOMS - DDF COMMIT Reqs Sent To Remote
.DWMY.E DDPCPUR - DDF DBAT CPU Reported To Requestor
.DWMY.E DDPELPL - DDF Local Elapsed Time
.DWMY.E DDPELPR - DDF Remote Elapsed Time
.DWMY.E DDPMSGR - DDF Messages Recvd From Remote
.DWMY.E DDPMSGS - DDF Messages Sent To Remote
.DWMY.E DDPNTHRD - DDF SMF 101 QLAC Segment Count
.DWMY.E DDPRBND - DDF Bound SQL for Remote
.DWMY.E DDPROWR - DDF Rows Recvd From Remote
.DWMY.E DDPROWS - DDF Rows Sent To Remote
.DWMY.E DDPSQLR - DDF SQL Stmts Recvd From Remote
.DWMY.E DDPSQLS - DDF SQL Stmts Sent To Remote
.DWMY. DDPTRNR - DDF Trans Recvd From Remote
.DWMY. DDPTRNS - DDF Trans Sent To Remote

Maximum Data Elements

.DWMY.E DDPMABRR - Max DDF Aborts Received

.DWMY.E DDPMABRS - Max DDF Aborts Sent
.DWMY.E DDPMBRBF - Max DDF Received Blocks - Block Fetch
.DWMY.E DDPMBROW - Max DDF Rows in Buffer - Block Fetch
.DWMY.E DDPMBTBF - Max DDF Transmit Blocks - Block Fetch
.DWMY.E DDPMBYTR - Max DDF Bytes Received
.DWMY.E DDPMBYTS - Max DDF Bytes Sent To Remote
.DWMY.E DDPMCBLB - Max DDF Switch Continuous to Limited
.DWMY.E DDPMCIEL - Max DDF Conversations Open
.DWMY.E DDPMCNVA - Max DDF Successful Conversations
.DWMY.E DDPMCNVQ - Max DDF Conversations Queued
.DWMY.E DDPMCNVR - Max DDF Conversations Received
.DWMY.E DDPMCNVS - Max DDF Conversations Sent
.DWMY.E DDPMCNVT - Max DDF Conversations Terminated
.DWMY.E DDPMCOMR - Max DDF Commits Received
.DWMY.E DDPMCOMS - Max DDF Commits Sent
.DWMY.E DDPMCPUR - Max DDF DBAT CPU Reported To Requestor
.DWMY.E DDPMELPL - Max DDF Local Elapsed Time
.DWMY.E DDPMELPR - Max DDF Remote Elapsed Time
.DWMY.E DDPMMSGR - Max DDF Messages Received
.DWMY.E DDPMMSGS - Max DDF Messages Sent
.DWMY.E DDPMRBND - Max DDF Bound SQL for Remote
.DWMY.E DDPMROWR - Max DDF Rows Received
.DWMY.E DDPMROWS - Max DDF Rows Sent To Remote
.DWMY.E DDPMSQLR - Max DDF SQL Stmts Received
.DWMY.E DDPMSQLS - Max DDF SQL Stmts Sent

298 Analyzer Option for DB2 Guide

5.10 DB2 Plan DDF Activity (DB2DDP) File

5.10.3 Usage Considerations

This section identifies any special considerations or
techniques related to using the DB2DDP file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

In the examples, we use a SAS macro to specify the DD name

Special Considerations/Techniques

1. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher time-spans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. The data elements STARTTS and ENDTS have different

Retrieval Examples

1. List DDF activity for yesterday by DB2 PLAN.

DATA TEST1;
SET &DB2D.DB2DDP01
;
YESTRDY=DATE()-1;
IF DATEPART(ENDTS)=YESTRDY;

Chapter 5: FILES 299

5.10 DB2 Plan DDF Activity (DB2DDP) File

RUN;

%LET BY = DB2ID DB2PLAN;

%LET BREAK = DB2PLAN;
PROC SORT DATA=TEST1 OUT=TEST1; BY &BY; RUN;

DATA TEST1;
SET TEST1;
%DDPSUM;

PROC PRINT DATA=TEST1; BY DB2ID;

VAR DB2ID DB2PLAN DDPBYTS DDPBYTR DDPCNVS DDPCNVR;
TITLE YESTERDAYS DDF ACTIVITY BY DB2 PLAN; RUN;

2. Print the maximum bytes transmitted for any DB2 PLAN

requesting DDF access.

DATA TEST2;
SET &DB2M.DB2DDP01;
IF DDPMBYTS>0 OR DDPMBYTR>0;

%LET BY = DB2PLAN;
%LET BREAK = DB2PLAN;

PROC SORT DATA=TEST2 OUT=TEST2; BY _BY;

DATA TEST2;
SET TEST2;
%DDPSUM;

PROC PRINT DATA=TEST2;

VAR DB2PLAN DDPMBYTS DDPMBYTR;
TITLE MAXIMUM BYTES SENT/RECEIVED BY DB2 PLAN;

300 Analyzer Option for DB2 Guide

5.11 DB2 System DDF Suspend (DB2_SH) File

FILENAME=DB2_SH01

The DB2_SH System DDF Suspend file maintains the last Systems
Services interval record produced by a DB2 system. Suspend
file records are used to obtain the true observation values
of the first record processed during the next daily execution
of CA MICS only when the first record processed is not the
first record produced by a DB2 system.

The DB2_SH File is a permanent file of the CA MICS DB2

Analyzer. It is strictly for internal use and exists only
at the DETAIL timespan.

5.12 DB2 Package/DBRM Activity (DB2DPP) File

FILENAME=DB2DPPxx

The DB2 Package/DBRM Activity file provides resource

consumption and activity information for packages and
database request modules.

DB2 plans are composed of packages, DBRMs, or a combination

of both. You can use the DB2DPP file to learn more about the
information provided in the DB2DSP (DB2 Plan) file.

The DB2DPP file is populated with data from the SMF type 101
record.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Elements List
3 - Usage Considerations

Chapter 5: FILES 301

5.12 DB2 Package/DBRM Activity (DB2DPP) File

5.12.1 File Organization

The table below identifies data elements contained in this
file. The entries for each data element are:

TIMESPAN: Defines the timespans in which the data element

is supported. The timespans are indicated by
the letters "XDWMYT" as follows:

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA
. - File is not supported

The timespan field also indicates Essential Elements with

the letter E, if applicable.

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The data element's long name.

The timespans in which a data element is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS
system at your installation.

+---------+-------------------------------------------------+
|Timespan | Level of Data Granularity |
+---------+-------------------------------------------------+
| | |
| DETAIL | N/A |
| | |
| DAYS | N/A |
| | |
| WEEKS | N/A |
| | |
| MONTHS | N/A |
| | |
| YEARS | N/A |
| | |
+---------+-------------------------------------------------+
| TABLES | N/A |
+---------+-------------------------------------------------+
Generation Date: Tue, May 12, 2009

302 Analyzer Option for DB2 Guide

5.12 DB2 Package/DBRM Activity (DB2DPP) File

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-8. DB2DPP Time-Span Granularity Chart

Chapter 5: FILES 303

5.12 DB2 Package/DBRM Activity (DB2DPP) File

5.12.2 DB2DPP Data Elements List

The table below identifies data elements contained in this
file. The entries for each data element are:

TIMESPAN: Defines the timespans in which the data element

is supported. The timespans are indicated by
the letters "XDWMYT" as follows:

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA
. - File is not supported

The timespan field also indicates Essential Elements with

the letter E, if applicable.

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The data element's long name.

The timespans in which a data element is supported are

defined by each installation when CA MICS is installed.
Therefore, this table has been generated as part of the
installation process to accurately reflect the CA MICS
system at your installation.

GENERATION DATE: Tue, May 12, 2009

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

......E DAY - Day of Month

......E DB2CONN - Connection Identifier
......E DB2ID - DB2 ID
......E DB2PKNM - Package/DBRM Name
......E HOUR - Hour of Day
......E MONTH - Month of Year
......E SYSID - System Identifier

304 Analyzer Option for DB2 Guide

5.12 DB2 Package/DBRM Activity (DB2DPP) File

......E WEEK - Week of Year

......E YEAR - Year of Century
......E ZONE - Time Zone

Common Data Elements

...... DAYNAME - Name of Day of Week

...... DB2ACE - DB2 Agent Control Element
...... DB2ATNM - Active Trace Number Mask
...... DB2AUTH - Authorization Identifier
...... DB2CORR - Correlation Identifier
...... DB2CPU - DB2 CPU Time
......E DB2CRDLU - CICS/RRSAF/DB Access LU Name
......E DB2CRDNT - CICS/RRSAF/DB Access Network Name
......E DB2CRDUV - CICS/RRSAF/DB Access Uniqueness Value
...... DB2DSTSN - Destination Sequence Number
...... DB2ISEQ - Instrumentation Sequence Number
......E DB2LOCN - DB2 Local Location ID
...... DB2LUNAM - Logical Unit NAME
......E DB2MLVL - MICS DB2 Maintenance Level
...... DB2NETID - Network ID
...... DB2OPID - Original Operator ID
......E DB2PLAN - Plan Name
......E DB2PTASK - Special Transaction Type Identifier
...... DB2REL - DB2 Release
......E DB2RELN - DB2 Release Number
...... DB2REQID - DB2 Requestor Location ID
...... DB2STCK - DB2 Store Clock At End Event
......E DB2THDTY - DB2 Thread Type
...... DB2UNIQ - DB2 Instance Number
......E ENDTS - End Time Stamp
......E MICSVER - CA MICS Version Number
......E STARTTS - Start Time Stamp
......E TRANETS - Transaction End Time Stamp
......E TRANSTS - Transaction Start Time Stamp
......E UOWID - Unit of Work Id
......E UOWIDSEQ - Unit of Work Id Sequence Number

Chapter 5: FILES 305

5.13 DB2 Buffer Pool Activity (DBPDSB) File

5.12.3 DB2DPP Usage Considerations

This section identifies any special considerations or
techniques related to using the DB2DPP file.

Special Considerations/Techniques

o Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher timespans,
certain fields lose significance and should not be
referenced.

- HOUR should not be used in MONTHS and YEARS.

- DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
- WEEK should not be used in MONTHS or YEARS.
- MONTH should not be used in YEARS.

o The data elements STARTTS and ENDTS have different

meanings when used in the DETAIL timespan versus their
meaning in the DAYS, WEEKS, MONTHS, and YEARS timespans.
The ENDTS and STARTTS, when appearing in the DAYS,
WEEKS, MONTHS, and YEARS timespans, indicate the span of
time over which the data has been summarized with
STARTTS indicating the lowest date and time and ENDTS
indicating the greatest date and time for the summarized
data.

5.13 DB2 Buffer Pool Activity (DBPDSB) File

FILENAME=DBPDSBxx

The DB2 Buffer Pool Activity file provides resource and

activity information for individual DB2 buffer pools.

The DBPDSB file is populated with data from the SMF type 100
record.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Element List
3 - Usage Considerations

306 Analyzer Option for DB2 Guide

5.13 DB2 Buffer Pool Activity (DBPDSB) File

5.13.1 File Organization

The table below identifies data elements by which the file is
sequenced and summarized in each timespan. "N/A" indicates
that the file is not supported in a timespan. At the DETAIL
level, data is sequenced but not summarized.

Note: The timespans in which a file is supported are defined

by each data center when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to accurately reflect the CA MICS system at your data
center.

+---------+-------------------------------------------------+
|Timespan | Level of Data Granularity |
+---------+-------------------------------------------------+
| | |
| DETAIL |SYSID DB2ID DB2PID YEAR MONTH |
| |DAY HOUR ENDTS |
| | |
| DAYS | N/A |
| | |
| WEEKS | N/A |
| | |
| MONTHS | N/A |
| | |
| YEARS | N/A |
| | |
+---------+-------------------------------------------------+
| TABLES | N/A |
+---------+-------------------------------------------------+
Generation Date: Tue, May 12, 2009

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-9. DBPDSB Timespan Granularity Chart

Chapter 5: FILES 307

5.13 DB2 Buffer Pool Activity (DBPDSB) File

5.13.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

GENERATION DATE: Tue, May 12, 2009

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

X.....E DAY - Day of Month

X.....E DB2ID - DB2 ID
X.....E DB2PID - DB2 BUFFER POOL ID
X.....E HOUR - Hour of Day
X.....E MONTH - Month of Year
X.....E SYSID - System Identifier
X.....E WEEK - Week of Year
X.....E YEAR - Year of Century
X.....E ZONE - Time Zone

308 Analyzer Option for DB2 Guide

5.13 DB2 Buffer Pool Activity (DBPDSB) File

Common Data Elements

X.....E DAYNAME - Name of Day of Week

X.....E DB2ISEQ - Instrumentation Sequence Number
X.....E DB2MLVL - MICS DB2 Maintenance Level
X.....E DB2REL - DB2 Release
X.....E DB2RELN - DB2 Release Number
X.....E DURATION - Recording Interval Time
X.....E ENDTS - End Time Stamp
X.....E MICSVER - CA MICS Version Number
X.....E STARTTS - Start Time Stamp

Accumulated Data Elements

X.....E DSBABBP - Active Buffers In Buffer Pool

X.....E DSBARA - Pages Moved HPOOL to VPOOL by ADMF
X.....E DSBARF - Pages Not Moved via ADMF
X.....E DSBAWA - Pages Moved VPOOL to HPOOL by ADMF
X.....E DSBAWF - Pages for Write Not Moved via ADMF
X.....E DSBBPSO - Buffer Pool Data Set Opened
X.....E DSBCIO - CASTOUT I/O OPERATIONS
X.....E DSBDBPR - Physical Data Base Page Requests
X.....E DSBDBPU - Data Base Page Updates
X.....E DSBDIO - Async Read I/O's via Dynamic Pref.
X.....E DSBDMCT - No. Times DM Critical WPHFWT reached
X.....E DSBDPF - No. Times Dynamic Prefetch Req.
X.....E DSBDPP - No. Async Page Reads via Dynamic Pref.
X.....E DSBDWRT - No. Times Deferred Write Threshold
X.....E DSBDWV - Times Vert. Defer. Write Thresh
X.....E DSBHBE - HPOOL Buffers Backed by Exp. Stg.
X.....E DSBHPA - Successful HPOOL Expand/Contract
X.....E DSBHPL - No. Buffers Allocated for a HPOOL
X.....E DSBHRA - Pages Moved Async HPOOL to VPOOL
X.....E DSBHRE - Successful Sync Req HPOOL to VPOOL
X.....E DSBHRF - Pages Read Failed Page Stolen
X.....E DSBHWA - Pages Moved Async Vpool to HPOOL
X.....E DSBHWF - Pages Write Failed Exp. Stg. Short
X.....E DSBHWR - No. Req. Move Sync VPOOL to HPOOL
X.....E DSBIMWS - Count of Immediate writes sys pages
X.....E DSBJIS - Total No. Pref. I/O Streams Denied
X.....E DSBLIO - Async Read I/O's via List Prefetch
X.....E DSBLPF - List Prefetch Requested
X.....E DSBLPP - Async Page Reads via List Prefetch
X.....E DSBMAX - BP Not Supp Concur WK File
X.....E DSBMMRR - Media Manager Read Requests
X.....E DSBNGT - No. Getpage Requests Not Satisfied
X.....E DSBNREC - Count of Type 100 Subtype 1 Records
X.....E DSBPCO - Pages Written for Castout I/Os

Chapter 5: FILES 309

5.13 DB2 Buffer Pool Activity (DBPDSB) File

X.....E DSBPL1 - Total Times Pref. Qty 1/2 Normal

X.....E DSBPL2 - Total Times Pref. Qty 1/4 Normal
X.....E DSBPQF - Total Times Parallel Buf. Not Alloc
X.....E DSBPQO - Total No. Parallel Queries
X.....E DSBREEP - Prefetch Request Disabled no Read
X.....E DSBRFXS - Read Pagefixed W/O Real Storage
X.....E DSBSGT - Getpage Req. by Seq. Access Req.
X.....E DSBSIO - Sync Read I/O's Seq Access Req
X.....E DSBSPDF - Prefetch Request Disabled no Buffer
X.....E DSBSPPF - Count Records Read Prefetch Requests
X.....E DSBSPWR - System Pages Written To DASD
X.....E DSBSQPF - Count Sequential Prefetch requests
X.....E DSBSSEF - Storage Shortage Expansion Fails
X.....E DSBTMIG - No. Migrated Dataset Encountered
X.....E DSBTPFB - WK File Abort - No BP Available
X.....E DSBTPFC - WK PF End - Concur PF of PAGE
X.....E DSBTPF0 - WK PF Abort - 0 PF QTY
X.....E DSBTPIO - No. Prefetch Async Read I/Os
X.....E DSBTRTO - No. Recall Timeouts
X.....E DSBVPA - Successful VPOOL Expand/Contract
X.....E DSBVPL - No. Buffers Allocated for a VPOOL
X.....E DSBWBVQ - Pages Deq VDWQ Destr Read Rq
X.....E DSBWDRP - Pages Destruct Read Req
X.....E DSBWFD - Work Files Denied Sort Merge
X.....E DSBWFF - Poor Sort Merge - Buf Short
X.....E DSBWFM - Max WK File Alloc Sort Merge
X.....E DSBWFR - Req Query WK File Sort Merge
X.....E DSBWFT - Work Files Req Sort Merge
X.....E DSBWFXS - Write Pagefixed W/O Real Storage
X.....E DSBWREE - No. Times Write Engine unavailable
X.....E DSBWRMM - Write I/Os By Media Manager
X.....E DSBXFL - Buffer Not Located -- VPOOL Full
X.....E DSBXIS - Max No. Concurrent Pref. Streams

Derived Data Elements

X..... DSBMRPR - Media Read Req Per Phys Req

X..... DSBPWPU - Page Write Per Page Update
X..... DSBRFRI - Read Frames Per Read Req

310 Analyzer Option for DB2 Guide

5.13 DB2 Buffer Pool Activity (DBPDSB) File

5.13.3 Usage Considerations

This section identifies the special considerations or
techniques related to using the DBPDSB file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the Information Area
name and "t" is the timespan. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier, to summarize the data as indicated by the _BY and
_BREAK macro definitions.

Special Considerations/Techniques

1. The following data elements only have meaning when using

the DBPDSBnn file in the DETAIL timespan, in that they
lose significance once summarization has been performed.
These data elements should only be referenced when using
the DBPDSBnn file in the DETAIL timespan.

DB2ISEQ - Instrumentation Sequence Number

2. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher timespans,
certain fields lose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

3. The data elements STARTTS and ENDTS have different

meanings when used in the DETAIL timespan versus their
meaning in the DAYS, WEEKS, MONTHS, and YEARS timespans.
The ENDTS and STARTTS, when appearing in the DAYS,
WEEKS, MONTHS, and YEARS timespans, indicate the span of
time over which the data has been summarized with
STARTTS indicating the lowest date and time and ENDTS
indicating the greatest date and time for the summarized
data.

Retrieval Examples

Chapter 5: FILES 311

5.13 DB2 Buffer Pool Activity (DBPDSB) File

1. Plot the Get Pages used by DB2 Buffer Pool over the last
4 weeks by week.

DATA TEST1;
SET &DBPW..DBPDSB01
&DBPW..DBPDSB02
&DBPW..DBPDSB03
&DBPW..DBPDSB04
;
DATE=DATEPART(STARTTS);
FORMAT DATE DATE7.;
%LET BY = DB2ID DB2PID WEEK ;
%LET BREAK = WEEK ;
PROC SORT DATA=TEST1 OUT=TEST1; BY &BY;
DATA TEST1;
SET TEST1;
%DSBSUM;
PROC PLOT DATA=TEST1;
BY DB2ID DB2PID;
PLOT DSBDBPU*WEEK;
TITLE
'DB2 Database Page Updates By Buffer Pool By Week';

2. Print the several indicators of buffer pool activity for

last week, zone 1 (prime shift). Number of Buffer Pool
Expansions, Buffer Pool Data Sets Opened, Number of
Active Buffers In Buffer Pool, System pages Written to
DASD, and Prefetch Request Disabled due to unavailable
buffer resource.

DATA TEST2;
SET _DB2W.DBPDSB01;
IF ZONE=1;
PROC PRINT DATA=TEST2;
VAR SYSID DB2ID DB2PID DSBSBPE DSBBPSO DSBABBP DSBSPWR
DSBSPDF;
TITLE 'DB2 BUFFER POOL PERFORMANCE INDICATORS FOR';
TITLE2 'LAST WEEK IN ZONE 1 (PRIME SHIFT)';

312 Analyzer Option for DB2 Guide

5.14 DB2 User Buffer Pool Activity File

FILENAME=DBPDBUxx

The DB2 User Buffer Pool Activity file provides resource

information for each DB2 buffer pool used by DB2
transactions. This file is sorted by the DB2 account codes.

The DBPDBU file is populated with data from the SMF type 101
record.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Element List
3 - Usage Considerations

Chapter 5: FILES 313

5.14 DB2 User Buffer Pool Activity File

5.14.1 File Organization

Note: The timespans in which a file is supported are defined

by each data center when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to accurately reflect the CA MICS system at your data
center.

+---------+-------------------------------------------------+
|Timespan | Level of Data Granularity |
+---------+-------------------------------------------------+
| | |
| DETAIL | N/A |
| | |
| DAYS | N/A |
| | |
| WEEKS | N/A |
| | |
| MONTHS | N/A |
| | |
| YEARS | N/A |
| | |
+---------+-------------------------------------------------+
| TABLES | N/A |
+---------+-------------------------------------------------+
Generation Date: Tue, May 12, 2009

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-10. DBPDBU Timespan Granularity Chart

314 Analyzer Option for DB2 Guide

5.14 DB2 User Buffer Pool Activity File

5.14.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

......E DAY - Day of Month

......E DB2ACT1 - AUTHORIZATION ID
......E DB2ACT2 - CORRELATION ID
......E DB2ACT3 - CONNECTION ID
......E DB2ACT4 - DISTRIBUTED THREAD TYPE
......E DB2ID - DB2 ID
......E DB2PID - DB2 BUFFER POOL ID
......E HOUR - Hour of Day
......E MONTH - Month of Year
......E SYSID - System Identifier
......E WEEK - Week of Year

Chapter 5: FILES 315

5.14 DB2 User Buffer Pool Activity File

......E YEAR - Year of Century

......E ZONE - Time Zone

Common Data Elements

......E DAYNAME - Name of Day of Week

...... DB2ACE - DB2 Agent Control Element
...... DB2ATNM - Active Trace Number Mask
......E DB2AUTH - Authorization Identifier
......E DB2CONN - Connection Identifier
......E DB2CORR - Correlation Identifier
......E DB2CPU - DB2 CPU Time
......E DB2DDFCT - DDF DB2 Commits Received from Remote
...... DB2DSTSN - Destination Sequence Number
...... DB2ISEQ - Instrumentation Sequence Number
......E DB2LOCN - DB2 Local Location ID
...... DB2LUNAM - Logical Unit NAME
......E DB2MLVL - MICS DB2 Maintenance Level
...... DB2NETID - Network ID
......E DB2OPID - Original Operator ID
......E DB2PLAN - Plan Name
......E DB2PTASK - Special Transaction Type Identifier
...... DB2REL - DB2 Release
......E DB2RELN - DB2 Release Number
......E DB2REQID - DB2 Requestor Location ID
......E DB2STCK - DB2 Store Clock At End Event
......E DB2THDTY - DB2 Thread Type
...... DB2UNIQ - DB2 Instance Number
......E ENDTS - End Time Stamp
......E MICSVER - CA MICS Version Number
......E STARTTS - Start Time Stamp

Accumulated Data Elements

......E DBUCIMW - No. Of Immed. Sync Write I/O Buffer

......E DBUGPGR - GETPAGE Requests
......E DBULPF - No. Times LIST PREFETCH req.
......E DBUPRFH - PREFETCH Read Requests Buffer
......E DBUSPRU - System Page Record Update
......E DBUSRIO - Synchronous Read IOs

316 Analyzer Option for DB2 Guide

5.14 DB2 User Buffer Pool Activity File

5.14.3 Usage Considerations

This section identifies any special considerations and/or
techniques related to using the DB2DSU file. Additionally,
several sample retrieval examples are provided to facilitate
the use of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the Information Area
name and "t" is the Time span. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier, to summarize the data as indicated by the _BY and
_BREAK macro definitions.

Special Considerations/Techniques

1. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
a file's granularity increases in higher time spans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. Data elements STARTTS and ENDTS have different

meanings when used in the DETAIL time span versus their
meaning in the DAYS, WEEKS, MONTHS, and YEARS
time-spans. The ENDTS and STARTTS, when appearing in
the DAYS, WEEKS, MONTHS, and YEARS time spans, indicate
the span of time over which the data has been summarized
with STARTTS indicating the lowest date and time and
ENDTS indicating the greatest date and time for the
summarized data.

Retrieval Examples

These examples assume that element DB2AUTH is a

sort/sequence element on the DSU file. If it is stored
as a DB2ACTn element, substitute the correct DB2ACTn
element name where appropriate.

1. List all users who submitted transactions that issued

enough GET PAGE requests to cause a buffer pool

Chapter 5: FILES 317

5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File

expansion. This helps to identify those users which

might function more efficiently if a larger buffer pool
were provided. The report is ordered from highest to
lowest.

DATA TEST1;
SET _DB2D.DBPDBU01;
IF DBUGPBE>0;
MACRO _BY SYSID DB2ID DB2PID DB2AUTH %
MACRO _BREAK DB2AUTH %
PROC SORT DATA=TEST1 OUT=TEST1; BY _BY;
DATA TEST1;
SET TEST1;
_DSUSUM;
PROC SORT DATA=TEST1 OUT=TEST1; BY DESCENDING DBUGPBE;
PROC PRINT DATA=TEST1;
VAR DB2AUTH DBUGPBE;
TITLE USERS NEEDING LARGER BUFFER POOLS;

5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File

FILENAME=DBPDBPxx

The DB2 Plan Buffer Pool Activity file provides resource

information for each DB2 buffer pool used by DB2
transactions, by DB2 Plan name. This file is sorted by DB2
Plan name.

The DBPDBP file is populated with data from the SMF type 101
record.

The following three sections describe the file's

organization, list the data elements maintained, and provide
usage hints:

1 - File Organization
2 - Data Element List
3 - Usage Considerations

318 Analyzer Option for DB2 Guide

5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File

5.15.1 File Organization

Note: The timespans in which a file is supported are defined

by each data center when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to accurately reflect the CA MICS system at your data
center.

+---------+-------------------------------------------------+
|Timespan | Level of Data Granularity |
+---------+-------------------------------------------------+
| | |
| DETAIL | N/A |
| | |
| DAYS | N/A |
| | |
| WEEKS | N/A |
| | |
| MONTHS | N/A |
| | |
| YEARS | N/A |
| | |
+---------+-------------------------------------------------+
| TABLES | N/A |
+---------+-------------------------------------------------+
Generation Date: Tue, May 12, 2009

NOTE: This file was generated with ESSENTIAL=ALL

Figure 5-11. DBPDBP Timespan Granularity Chart

Chapter 5: FILES 319

5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File

5.15.2 Data Element List

The table below identifies data elements contained in this
file. The entries for each data element are as follows:

TIMESPAN: Defines the timespans in which the data element

X - DETAIL
D - DAYS
W - WEEKS
M - MONTHS
Y - YEARS
T - TABLES AREA

DATA ELEMENT: The data element name.

DATA ELEMENT DESCRIPTION: The long name of the data element.

Note: The timespans in which a data element is supported are

defined by each site when CA MICS is installed. Therefore,
this table has been generated as part of the installation
process to reflect the CA MICS system at your site.

GENERATION DATE: Tue, May 12, 2009

Note: Essential data elements are identified by an "E"

under the Timespan asterisk (*) column.

Time- Data Data Element

Span * Element Description (LABEL)
------- -------- ----------------------------------------

Sequence/Summary Data Elements

......E DAY - Day of Month

......E DB2ID - DB2 ID
......E DB2PID - DB2 BUFFER POOL ID
......E DB2PLAN - Plan Name
......E HOUR - Hour of Day
......E MONTH - Month of Year
......E SYSID - System Identifier
......E WEEK - Week of Year
......E YEAR - Year of Century

320 Analyzer Option for DB2 Guide

5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File

......E ZONE - Time Zone

Common Data Elements

......E DAYNAME - Name of Day of Week

...... DB2ACE - DB2 Agent Control Element
...... DB2ATNM - Active Trace Number Mask
......E DB2AUTH - Authorization Identifier
......E DB2CONN - Connection Identifier
......E DB2CORR - Correlation Identifier
......E DB2CPU - DB2 CPU Time
......E DB2DDFCT - DDF DB2 Commits Received from Remote
...... DB2DSTSN - Destination Sequence Number
...... DB2ISEQ - Instrumentation Sequence Number
......E DB2LOCN - DB2 Local Location ID
...... DB2LUNAM - Logical Unit NAME
......E DB2MLVL - MICS DB2 Maintenance Level
...... DB2NETID - Network ID
......E DB2OPID - Original Operator ID
......E DB2PTASK - Special Transaction Type Identifier
...... DB2REL - DB2 Release
......E DB2RELN - DB2 Release Number
......E DB2REQID - DB2 Requestor Location ID
......E DB2STCK - DB2 Store Clock At End Event
......E DB2THDTY - DB2 Thread Type
...... DB2UNIQ - DB2 Instance Number
......E ENDTS - End Time Stamp
......E MICSVER - CA MICS Version Number
......E STARTTS - Start Time Stamp

Accumulated Data Elements

......E DBPCIMW - NO. Of Immed. Sync Write I/O

......E DBPGPGR - Get Page Requests
......E DBPLPF - NO. Times LIST PREFETCH req.
......E DBPPRFH - Prefetch Read Requests
......E DBPSPRU - System Page Record Update
......E DBPSRIO - Synchronous Read IOs

Chapter 5: FILES 321

5.15 DB2 Plan Buffer Pool Activity (DBPDBP)File

5.15.3 Usage Considerations

This section identifies any special considerations or
techniques related to using the DBPDBP file. Additionally,
several retrieval examples are provided to facilitate the use
of this file.

In the examples, we use a SAS macro to specify the DD name

part of the CA MICS file name. These macros are a standard
part of CA MICS and are available for all files. The macro
name has the form _iiit, where "iii" is the information area
name and "t" is the timespan. In addition, many of the
examples use the _fffSUM macro, where "fff" is the file
identifier to summarize the data as indicated by the _BY and
_BREAK macro definitions.

Special Considerations/Techniques

1. Care must be exercised in using the special date and

time data elements contained in each CA MICS file. As
the file's granularity increases in higher timespans,
certain fields loose significance and should not be
referenced.

o HOUR should not be used in MONTHS and YEARS.

o DAY and DAYNAME should not be used in WEEKS, MONTHS,
or YEARS.
o WEEK should not be used in MONTHS or YEARS.
o MONTH should not be used in YEARS.

2. The data elements STARTTS and ENDTS have different

meanings when used in the DETAIL timespan versus their
meaning in the DAYS, WEEKS, MONTHS, and YEARS timespans.
The ENDTS and STARTTS, when appearing in the DAYS,
WEEKS, MONTHS, and YEARS timespans, indicate the span of
time over which the data has been summarized with
STARTTS indicating the lowest date and time and ENDTS
indicating the greatest date and time for the summarized
data.

Retrieval Examples

1. Buffer Pool Activity by DB2 PLAN.

DATA TEST1;
SET _DB2D.DBPDBP01
;
YESTRDY=DATE()-1;
IF DATEPART(ENDTS)=YESTRDY;

322 Analyzer Option for DB2 Guide

5.16 DB2 Buffer Pool Suspend (DBP_DB) File

MACRO _BY DB2PLAN DB2AUTH %

MACRO _BREAK DB2AUTH %
PROC SUMMARY DATA=TEST1 NWAY;
CLASS SYSID DB2ID DB2PLAN DB2PID;
VAR DBPCIMW DBPGPGR DBPLPF DBPPRFH DBPSRIO DBPUUOW;
OUTPUT OUT=STATS SUM=;
PROC SORT DATA=STATS; BY SYSID DB2ID;
PROC PRINT DATA=STATS UNIFORM;
BY SYSID DB2ID;
VAR DB2PLAN DB2PID DBPCIMW DBPGPGR DBPLPF DBPPRFH
DBPSRIO DBPUUOW;
TITLE YESTERDAYS BUFFER POOL USAGE BY PLAN;

5.16 DB2 Buffer Pool Suspend (DBP_DB) File

FILENAME=DBP_DB01

The DBP_DB DB2 Buffer Pool Suspend file maintains the

last Systems Services interval record produced by a DB2
system. Suspend file records are used to obtain the true
observation values of the first record processed during the
next daily execution of CA MICS only when the first record
processed is not the first record produced by a DB2 system.

The DBP_DB File is a permanent file of the CA MICS DB2

Analyzer. It is strictly for internal use and exists only
at the DETAIL timespan.

Chapter 5: FILES 323

Chapter 6: DATA SOURCES
This chapter discusses data collection considerations and the
data source used by the CA MICS DB2 Analyzer.

This section contains the following topics:

6.1 Data Collection Considerations (see page 326)
6.2 Data Sources Supported (see page 327)
6.3 Data Element/Data Source Cross-Reference (see page 328)
6.4 Query CP Parallelism Considerations (see page 376)
6.5 ACCUMACC Roll-up Records (see page 398)
6.6 CA MICS and CA SMF Director Interface (see page 405)

Chapter 6: DATA SOURCES 325

6.1 Data Collection Considerations

Before installing the CA MICS Analyzer Option for DB2, you
must address the following data collection considerations:

Space Considerations
--------------------

o The DB2 Analyzer collects information about buffer pool

usage and summarizes it across all active buffer pools to
minimize space considerations.

o IBM classifies some fields as serviceability fields,

meaning that they are used by IBM to solve problems.
Because IBM reserves the right to define fields as
serviceability fields, the analyzer provides a cluster
code for elements that are in the database but are now
derived from fields classified as serviceability fields.

To deactivate these elements in your CA MICS database,

use the OPTION statement keyword and cluster code
documented in Chapter 7 of this guide.

Accounting Data Collection

--------------------------

o The DB2 Analyzer contains information from SMF type 101

Accounting records (IFCID 0003). Those records are
further broken into types of traces, including:

+--------------------------------------------------------+
| Trace | Type of |
| Class | Data Collected |
|-------|------------------------------------------------|
| 1 | Accounting data |
| 2 | "In DB2" time |
| 3 | Wait times for I/O, locks, latches, drains, and|
| | claims |
| 4 | User-defined accounting |
| 5 | Time spent processing IFI requests |
| 7 | Package-level accounting "in DB2" time |
| 8 | Package-level accounting wait time "in DB2" |
| 10 | Package-level accounting "in DB2" detail data |
+--------------------------------------------------------+

The DB2 Analyzer records data from classes 1, 2, 3, 5, 7,

8, and 10.

326 Analyzer Option for DB2 Guide

6.2 Data Sources Supported

The CA MICS DB2 Analyzer uses data from SMF type 100
(statistics trace) and SMF type 101 (accounting trace)
records.

To obtain the maximum benefit from the DB2 Analyzer, ensure

that your site collects both record types. Because these
records are optional, coordinate with your site's DB2
administrator to be sure that data will be collected each
day.

SMF Type 100 Statistics Trace Records

-------------------------------------
Statistics trace information reports DB2 system and database
services usage. The statistics trace information used in the
CA MICS DB2 Analyzer includes the following:

+-----------------------------------------------------------+
| This information... |is captured in this CA MICS file|
|-----------------------------------------------------------|
| Agent services manager | DB2DSY |
| Instrumentation facility | DB2DSY |
| Latch manager | DB2DSY |
| Log manager | DB2DSY |
| Storage manager | DB2DSY |
| Subsystem support | DB2DSY |
| Buffer manager | DB2DSD |
| Lock manager | DB2DSD |
| SQL | DB2DSD |
| Distributed processing | DB2DDY |
| Data sharing | DB2DSD, DB2DSY |
+-----------------------------------------------------------+

Statistics trace data is written on a user-controlled

interval basis.

SMF Type 101 Accounting Trace Records

-------------------------------------
Accounting trace records provide application program
information. The accounting trace information used in the
CA MICS DB2 Analyzer includes the following:

Chapter 6: DATA SOURCES 327

6.3 Data Element/Data Source Cross-Reference

Accounting trace data is collected from the successful

allocation of a thread to the termination of that thread or
when the authorization ID changes.

6.3 Data Element/Data Source Cross-Reference

The following tables provide cross-references from the data
elements in the DB2 Information Area files to their
corresponding input data field names. This information is
useful when you are familiar with an input data source and
want to identify the data element that contains the data
field. It also helps to identify the data elements that are
unique to a data source and lets you locate comparable fields
when converting from one DB2 monitor to another.

Note: Not all DB2 data elements are listed below. Elements
not listed would include those that are computed from other
elements and may not be directly assigned from a single raw
input element.

The cross-reference listing is a useful tool when tailoring a

database by identifying data elements pertaining to the DB2
versions being input. As new DB2 versions are installed,
database tailoring is necessary to activate new elements and
deactivate elements that may no longer be available in the
input DB2 data.

328 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

The DBPDBP (DB2 Plan Buffer Pool Activity) File

Chapter 6: DATA SOURCES 329

6.3 Data Element/Data Source Cross-Reference

The DBPDBU (DB2 User Buffer Pool Activity) File

330 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

The DB2DDP (DB2 Plan DDF Activity) File

Chapter 6: DATA SOURCES 331

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ACE DB2 Agent Control Element DB2ACE QWHSACE | X | X | X | X | X |
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2AUTH Authorization Identifier DB2AUTH QWHCAID | X | X | X | X | X |
DB2CONN Connection Identifier DB2CONN QWHCCN | X | X | X | X | X |
DB2CORR Correlation Identifier DB2CORR QWHCCV | X | X | X | X | X |
DB2DDFCT DDF COMMIT Count DB2DDFCT QWHSLUCC | X | X | X | X | X |
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2DSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2LOCN DDF Local Location ID DB2LOCN QWHSLOCN | X | X | X | X | X |
DB2LUNAM DB2 Logical Unit Name DB2LUNAM QWHSLUNM | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2NETID Network Identifier DB2NETID QWACNID | X | X | X | X | X |
DB2OPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DB2PLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DB2REQID DDF Requester Location ID DB2REQID QWHDRQNM | X | X | X | X | X |
DB2RLOCN DDF Remote Location ID DB2RLOCN QLSTLOCN | X | X | X | X | X |
DB2STCK DB2 Store Clock At End Event DB2STCK QWHSSTCK | X | X | X | X | X |
DB2UNIQ DDF Instance Number Identifier DB2UNIQ QWHSLUUV | X | X | X | X | X |
DDPABRR DDF Abort Reqs Recvd From Remote DDPABRR QLACABRR | X | X | X | X | X |
DDPABRS DDF Abort Reqs Sent To Remote DDPABRS QLACABRS | X | X | X | X | X |
DDPADAC DDF DRDA DB2 Protocol DDPADAC QLACFLGS | X | X | | | |
DDPBKRC DDF Backout Requests Received from the DDPBKRC QLACBKRC | X | X | X | X | X |
DDPBKSE DDF Backout Requests Sent to the DDPBKSE QLACBKSE | X | X | X | X | X |
DDPBRBF DDF Received Blocks - Block Fetch DDPBRBF QLACBRBF | X | X | X | X | X |
DDPBROW DDF Rows in Buffer - Block Fetch DDPBROW QLACBROW | X | X | X | X | X |
DDPBTBF DDF Transmit Blocks - Block Fetch DDPBTBF QLACBTBF | X | X | X | X | X |
DDPBYTR DDF Bytes Recvd From Remote DDPBYTR QLACBYTR | X | X | X | X | X |
DDPBYTS DDF Bytes Sent To Remote DDPBYTS QLACBYTS | X | X | X | X | X |
DDPCBLB DDF Switch Continuous to Limited DDPCBLB QLACCBLB | X | X | X | X | X |
DDPCIEL DDF Max. Conversations Open DDPCIEL QLACCIEL | X | X | X | X | X |
DDPCNVA DDF Successful Conversations DDPCNVA QLACCNVA | X | X | X | X | X |
DDPCNVQ DDF Conv Req Queued Waiting Alloc DDPCNVQ QLACCNVQ | X | X | X | X | X |
DDPCNVR DDF Convs Recvd From Remote DDPCNVR QLACCNVR | X | X | X | X | X |
DDPCNVS DDF Convs Sent To Remote DDPCNVS QLACCNVS | X | X | X | X | X |
DDPCNVT DDF Conversations Terminated DDPCNVT QLACCNVT | X | X | X | X | X |
DDPCOMR DDF COMMIT Reqs Recvd From Remote DDPCOMR QLACCOMR | X | X | X | X | X |
DDPCOMS DDF COMMIT Reqs Sent To Remote DDPCOMS QLACCOMS | X | X | X | X | X |
DDPCPTR DDF Number of Commit Operations DDPCPTR QLACCPTR | X | X | X | X | X |
DDPCPUR DDF DBAT CPU Reported To Requestor DDPCPUR QLACCPUR | X | X | X | X | X |
DDPCRSE DDF Commit Requests Sent to the DDPCRSE QLACCRSE | X | X | X | X | X |
DDPELPL DDF Local Elapsed Time DDPELPL QLACCPUL | X | X | X | X | X |
DDPELPR DDF Remote Elapsed Time DDPELPR QLACCPUR | X | X | X | X | X |
DDPINDT DDF Number of Threads That Became DDPINDT QLACINDT | X | X | X | X | X |
DDPLARC DDF Last Agent Requests Received from DDPLARC QLACLARC | X | X | X | X | X |
DDPLASE DDF Last Agent Requests Sent to the DDPLASE QLACLASE | X | X | X | X | X |
DDPMBRBF Max DDF Received Blocks - Block Fetch DDPMBRBF QLACBRBF | X | X | X | X | X |
DDPMBROW Max DDF Rows in Buffer - Block Fetch DDPMBROW QLACBROW | X | X | X | X | X |
DDPMBTBF Max DDF Transmit Blocks - Block Fetch DDPMBTBF QLACBTBF | X | X | X | X | X |
DDPMCBLB Max DDF Switch Continuous to Limited DDPMCBLB QLACCBLB | X | X | X | X | X |
DDPMCIEL Max DDF Conversations Open DDPMCIEL QLACCIEL | X | X | X | X | X |
DDPMCNVA Max DDF Successful Conversations DDPMCNVA QLACCNVA | X | X | X | X | X |
DDPMCNVQ Max DDF Convs. Queued Waiting Alloc. DDPMCNVQ QLACCNVQ | X | X | X | X | X |
DDPMCNVT Max DDF Conversations Terminated DDPMCNVT QLACCNVT | X | X | X | X | X |
DDPMELPL Max DDF DBAT Local Elapsed Time DDPMELPL QLACCPUL | X | X | X | X | X |
DDPMELPR Max DDF DBAT Remote Elapsed Time DDPMELPR QLACCPUR | X | X | X | X | X |
DDPMRBND Max DDF Bound SQL for Remote DDPMRBND QLACRBND | X | X | X | X | X |
DDPMSGR DDF Messages Recvd From Remote DDPMSGR QLACMSGR | X | X | X | X | X |
DDPMSGS DDF Messages Sent To Remote DDPMSGS QLACMSGS | X | X | X | X | X |
DDPPRIDR DDF Product ID of the Remote Location DDPPRIDR QLACPRID | X | X | X | X | X |
DDPPRRC DDF Prepare Requests Received from the DDPPRRC QLACPRRC | X | X | X | X | X |
DDPPRSE DDF Prepare Requests Sent to the DDPPRSE QLACPRSE | X | X | X | X | X |
DDPRBND DDF Bound SQL for Remote DDPRBND QLACRBND | X | X | X | X | X |
DDPRBTR DDF Number of Rollback Operations DDPRBTR QLACRBTR | X | X | X | X | X |
DDPROWR DDF Rows Recvd From Remote DDPROWR QLACROWR | X | X | X | X | X |
DDPROWS DDF Rows Sent To Remote DDPROWS QLACROWS | X | X | X | X | X |
DDPRRRC DDF Forget Responses Received from DDPRRRC QLACRRRC | X | X | X | X | X |
DDPRRSE DDF Forget Responses Sent to the DDPRRSE QLACRRSE | X | X | X | X | X |

332 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DDPRUQL DDF Roll Up Flag DDPRUQL QLACFLGS | | | | | X |

DDPSDAC DDF Private DB2 Protocol DDPSDAC QLACFLGS | X | X | | | |
DDPSQLR DDF SQL Stmts Recvd From Remote DDPSQLR QLACSQLR | X | X | X | X | X |
DDPSQLS DDF SQL Stmts Sent To Remote DDPSQLS QLACSQLS | X | X | X | X | X |
DDPSRQL DDF Summary Roll Up Flag DDPSRQL QLACFLGS | | | | | X |
DDPTRNS DDF Trans Sent To Remote DDPTRNS QLACTRNS | X | X | X | X | X |
DDPVNRC DDF Backout Responses Received from DDPVNRC QLACVNRC | X | X | X | X | X |
DDPVNSE DDF Backout Responses Sent to DDPVNSE QLACVNSE | X | X | X | X | X |
DDPVYRC DDF Request Commit Responses received DDPVYRC QLACVYRC | X | X | X | X | X |
DDPVYSE DDF Request Commit Responses sent to DDPVYSE QLACVYSE | X | X | X | X | X |
----------------------------------------------------------------------------------------------------------------------------------

Chapter 6: DATA SOURCES 333

6.3 Data Element/Data Source Cross-Reference

The DB2DDU (DB2 User DDF Activity) File

334 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ACE DB2 Agent Control Element DB2ACE QWHSACE | X | X | X | X | X |
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2AUTH Authorization Identifier DB2AUTH QWHCAID | X | X | X | X | X |
DB2CONN Connection Identifier DB2CONN QWHCCN | X | X | X | X | X |
DB2CORR Correlation Identifier DB2CORR QWHCCV | X | X | X | X | X |
DB2DDFCT DDF COMMIT Count DB2DDFCT QWHSLUCC | X | X | X | X | X |
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2DSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2LOCN DDF Local Location ID DB2LOCN QWHSLOCN | X | X | X | X | X |
DB2LUNAM DB2 Logical Unit Name DB2LUNAM QWHSLUNM | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2NETID Network Identifier DB2NETID QWACNID | X | X | X | X | X |
DB2OPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DB2PLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DB2REQID DDF Requester Location ID DB2REQID QWHDRQNM | X | X | X | X | X |
DB2RLOCN DDF Remote Location ID DB2RLOCN QLSTLOCN | X | X | X | X | X |
DB2STCK DB2 Store Clock At End Event DB2STCK QWHSSTCK | X | X | X | X | X |
DB2UNIQ DDF Instance Number Identifier DB2UNIQ QWHSLUUV | X | X | X | X | X |
DDUABRR DDF Abort Requests Received From Remote DDUABRR QLACABRR | X | X | X | X | X |
DDUABRS DDF Abort Requests Sent To Remote DDUABRS QLACABRS | X | X | X | X | X |
DDUADAC DDF DRDA Connection Protocol DDUADAC QLACFLGS | X | X | | | |
DDUBKRC DDF Backout Requests Received from the DDUBKRC QLACBKRC | X | X | X | X | X |
DDUBKSE DDF Backout Requests Sent to the DDUBKSE QLACBKSE | X | X | X | X | X |
DDUBRBF DDF Received Blocks - Block Fetch DDUBRBF QLACBRBF | X | X | X | X | X |
DDUBROW DDF Rows in Buffer - Block Fetch DDUBROW QLACBROW | X | X | X | X | X |
DDUBTBF DDF Transmit Blocks - Block Fetch DDUBTBF QLACBTBF | X | X | X | X | X |
DDUBYTR DDF Data Bytes Received From Remote DDUBYTR QLACBYTR | X | X | X | X | X |
DDUBYTS DDF Data Bytes Sent To Remote DDUBYTS QLACBYTS | X | X | X | X | X |
DDUCBLB DDF Switch Continuous to Limited DDUCBLB QLACCBLB | X | X | X | X | X |
DDUCIEL DDF Max. Conversations Open DDUCIEL QLACCIEL | X | X | X | X | X |
DDUCNVA DDF Successful Conversations DDUCNVA QLACCNVA | X | X | X | X | X |
DDUCNVQ DDF Conv Req Queued Waiting Alloc DDUCNVQ QLACCNVQ | X | X | X | X | X |
DDUCNVR DDF VTAM Convers. Received From Remote DDUCNVR QLACCNVR | X | X | X | X | X |
DDUCNVS DDF VTAM Conversations Sent To Remote DDUCNVS QLACCNVS | X | X | X | X | X |
DDUCNVT DDF Conversations Terminated DDUCNVT QLACCNVT | X | X | X | X | X |
DDUCOMR DDF DB2 COMMITs Received From Remote DDUCOMR QLACCOMR | X | X | X | X | X |
DDUCOMS DDF DB2 COMMITs Sent To Remote DDUCOMS QLACCOMS | X | X | X | X | X |
DDUCPTR DDF Number of Commit Operations DDUCPTR QLACCPTR | X | X | X | X | X |
DDUCPUR DDF DBAT CPU Reported To Requester DDUCPUR QLACDBAT | X | X | X | X | X |
DDUCRSE DDF Commit Requests Sent to the DDUCRSE QLACCRSE | X | X | X | X | X |
DDUELPL DDF Local Elapsed Time DDUELPL QLACCPUL | X | X | X | X | X |
DDUELPR DDF Remote Elapsed Time DDUELPR QLACCPUR | X | X | X | X | X |
DDUFLGS DDF Type of Protocol DDUFLGS QLACFLGS | X | X | X | X | X |
DDUINDT DDF Number of Threads That Became DDUINDT QLACINDT | X | X | X | X | X |
DDULARC DDF Last Agent Requests Received from DDULARC QLACLARC | X | X | X | X | X |
DDULASE DDF Last Agent Requests Sent to the DDULASE QLACLASE | X | X | X | X | X |
DDUMABRR Max DDF Abort Req. Received From Remote DDUMABRR QLACABRR | X | X | X | X | X |
DDUMABRS Max DDF Abort Requests Sent To Remote DDUMABRS QLACABRS | X | X | X | X | X |
DDUMBRBF Max DDF Received Blocks - Block Fetch DDUMBRBF QLACBRBF | X | X | X | X | X |
DDUMBROW Max DDF Rows in Buffer - Block Fetch DDUMBROW QLACBROW | X | X | X | X | X |
DDUMBTBF Max DDF Transmit Blocks - Block Fetch DDUMBTBF QLACBTBF | X | X | X | X | X |
DDUMBYTR Max. DDF Data Bytes Received From Remote DDUMBYTR QLACBYTR | X | X | X | X | X |
DDUMBYTS Max. DDF Data Bytes Sent To Remote DDUMBYTS QLACBYTS | X | X | X | X | X |
DDUMCBLB Max DDF Switch Continuous to Limited DDUMCBLB QLACCBLB | X | X | X | X | X |
DDUMCIEL Max DDF Conversations Open DDUMCIEL QLACCIEL | X | X | X | X | X |
DDUMCNVA Max DDF Successful Conversations DDUMCNVA QLACCNVA | X | X | X | X | X |
DDUMCNVQ Max. DDF Convs. Queued Waiting Alloc. DDUMCNVQ QLACCNVQ | X | X | X | X | X |
DDUMCNVR Max. DDF Convs. Received From Remote DDUMCNVR QLACCNVR | X | X | X | X | X |
DDUMCNVS Max. DDF Conversations Sent To Remote DDUMCNVS QLACCNVS | X | X | X | X | X |
DDUMCNVT Max DDF Conversations Terminated DDUMCNVT QLACCNVT | X | X | X | X | X |
DDUMCOMR Max. DDF COMMITs Received From Remote DDUMCOMR QLACCOMR | X | X | X | X | X |
DDUMCOMS Max. DDF DB2 COMMITs Sent To Remote DDUMCOMS QLACCOMS | X | X | X | X | X |
DDUMCPUR Max. DDF DBAT CPU Reported To Requester DDUMCPUR QLACDBAT | X | X | X | X | X |
DDUMDWTM DDF Wait Tm DB Agent Due Max DBATs DDUMDWTM QLACMDWT | X | X | X | X | X |
DDUMELPL Max. DDF DBAT Local Elapsed Time DDUMELPL QLACCPUL | X | X | X | X | X |
DDUMELPR Max. DDF DBAT Remote Elapsed Time DDUMELPR QLACCPUR | X | X | X | X | X |
DDUMMSGR Max. DDF Messages Received From Remote DDUMMSGR QLACMSGR | X | X | X | X | X |

Chapter 6: DATA SOURCES 335

6.3 Data Element/Data Source Cross-Reference

DDUMMSGS Max. DDF Messages Sent To Remote DDUMMSGS QLACMSGS | X | X | X | X | X |

DDUMRBND Max DDF Bound SQL for Remote DDUMRBND QLACRBND | X | X | X | X | X |
DDUMROWR Max. DDF Data Rows Received From Remote DDUMROWR QLACROWR | X | X | X | X | X |
DDUMROWS Max. DDF Data Rows Sent To Remote DDUMROWS QLACROWS | X | X | X | X | X |
DDUMSGR DDF Messages Received From Remote DDUMSGR QLACMSGR | X | X | X | X | X |
DDUMSGS DDF Messages Sent To Remote DDUMSGS QLACMSGS | X | X | X | X | X |
DDUMSQLR Max. DDF SQL Stmts. Received From Remote DDUMSQLR QLACSQLR | X | X | X | X | X |
DDUMSQLS Max. DDF SQL Stmts. Sent To Remote DDUMSQLS QLACSQLS | X | X | X | X | X |
DDUPRIDR DDF Product ID of the Remote Location DDUPRIDR QLACPRID | X | X | X | X | X |
DDUPRRC DDF Prepare Requests Received from the DDUPRRC QLACPRRC | X | X | X | X | X |
DDUPRSE DDF Prepare Requests Sent to the DDUPRSE QLACPRSE | X | X | X | X | X |
DDURBND DDF Bound SQL for Remote DDURBND QLACRBND | X | X | X | X | X |
DDUROWR DDF Data Rows Received From Remote DDUROWR QLACROWR | X | X | X | X | X |
DDUROWS DDF Data Rows Sent To Remote DDUROWS QLACROWS | X | X | X | X | X |
DDURRRC DDF Forget Responses Received from DDURRRC QLACRRRC | X | X | X | X | X |
DDUSDAC DDF Private DB2 Connection Protocol DDUSDAC QLACFLGS | X | X | | | |
DDURRSE DDF Forget Responses Sent to the DDURRSE QLACRRSE | X | X | X | X | X |
DDURUQL DDF Roll Up Flag DDURUQL QLACFLGS | | | | | X |
DDUSQLR DDF SQL Statements Received From Remote DDUSQLR QLACSQLR | X | X | X | X | X |
DDUSQLS DDF SQL Statements Sent To Remote DDUSQLS QLACSQLS | X | X | X | X | X |
DDUSRQL DDF Summary Roll Up Flag DDUSRQL QLACFLGS | | | | | X |
DDUTRNR DDF Transactions Received From Remote DDUTRNR QLACTRNR | X | X | X | X | X |
DDUTRNS DDF Transactions Sent To Remote DDUTRNS QLACTRNS | X | X | X | X | X |
DDUVNRC DDF Backout Responses Received from DDUVNRC QLACVNRC | X | X | X | X | X |
DDUVNSE DDF Backout Responses Sent to DDUVNSE QLACVNSE | X | X | X | X | X |
DDUVYRC DDF Request Commit Responses received DDUVYRC QLACVYRC | X | X | X | X | X |
DDUVYSE DDF Request Commit Responses sent to DDUVYSE QLACVYSE | X | X | X | X | X |
----------------------------------------------------------------------------------------------------------------------------------

336 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

The DB2DDY (DB2 System DDF Statistics) File

Chapter 6: DATA SOURCES 337

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ACE DB2 Agent Control Element DB2ACE QWHSACE | X | X | X | X | X |
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2DSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2LOCN DDF Local Location ID DB2LOCN QWHSLOCN | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DB2RLOCN DDF Remote Location ID DB2RLOCN QLACLOCN | X | X | X | X | X |
DB2STCK DB2 Store Clock At End Event DB2STCK QWHSSTCK | X | X | X | X | X |
DDYABRR DDF Abort Requests Received From Remote DDYABRR QLSTABRR | X | X | X | X | X |
DDYABRS DDF Abort Requests Sent To Remote DDYABRS QLSTABRS | X | X | X | X | X |
DDYBKRC DDF Backout Requests Received from the DDYBKRC QLSTBKRC | X | X | X | X | X |
DDYBKSE DDF Backout Requests Sent to the DDYBKSE QLSTBKSE | X | X | X | X | X |
DDYBRBF DDF Blk Recv Using Blk Fetch DDYBRBF QLSTBRBF | X | X | X | X | X |
DDYBROW DDF Rows In Buf for Blk Fetch DDYBROW QLSTBROW | X | X | X | X | X |
DDYBTBF DDF Blk Sent Using Blk Fetch DDYBTBF QLSTBTBF | X | X | X | X | X |
DDYBYTR DDF Data Bytes Received From Remote DDYBYTR QLSTBYTR | X | X | X | X | X |
DDYBYTS DDF Data Bytes Sent To Remote DDYBYTS QLSTBYTS | X | X | X | X | X |
DDYCBLB DDF Switch Cont To Limited DDYCBLB QLSTCBLB | X | X | X | X | X |
DDYCNVQ DDF Conv Req Queued Waiting Alloc DDYCNVQ QLSTCNVQ | X | X | X | X | X |
DDYCNVR DDF VTAM Conversations Received From DDYCNVR QLSTCNVR | X | X | X | X | X |
DDYCNVS DDF VTAM Conversations Sent To Remote DDYCNVS QLSTCNVS | X | X | X | X | X |
DDYCOMR DDF DB2 COMMITs Received From Remote DDYCOMR QLSTCOMR | X | X | X | X | X |
DDYCOMS DDF DB2 COMMITs Sent To Remote DDYCOMS QLSTCOMS | X | X | X | X | X |
DDYCPTR DDF Number of Commit Operations DDYCPTR QLSTCPTR | X | X | X | X | X |
DDYCRRC DDF Commit Requests Received from the DDYCRRC QLSTCRRC | X | X | X | X | X |
DDYCRSE DDF Commit Requests Sent to the DDYCRSE QLSTCRSE | X | X | X | X | X |
DDYINDT DDF Number of Threads That Became DDYINDT QLSTINDT | X | X | X | X | X |
DDYLARC DDF Last Agent Requests Received from DDYLARC QLSTLARC | X | X | X | X | X |
DDYLASE DDF Last Agent Requests Sent to the DDYLASE QLSTLASE | X | X | X | X | X |
DDYMABRR Max. DDF Abort Req. Received From Remote DDYMABRR QLSTABRR | X | X | X | X | X |
DDYMABRS Max. DDF Abort Requests Sent To Remote DDYMABRS QLSTABRS | X | X | X | X | X |
DDYMBRBF Max DDF Blk Recv Using Blk Fetch DDYMBRBF QLSTBRBF | X | X | X | X | X |
DDYMBROW Max DDF Rows In Buf for Blk Fetch DDYMBROW QLSTBROW | X | X | X | X | X |
DDYMBTBF Max DDF Blk Sent Using Blk Fetch DDYMBTBF QLSTBTBF | X | X | X | X | X |
DDYMBYTR Max. DDF Data Bytes Received From Remote DDYMBYTR QLSTBYTR | X | X | X | X | X |
DDYMBYTS Max. DDF Data Bytes Sent To Remote DDYMBYTS QLSTBYTS | X | X | X | X | X |
DDYMCBLB Max DDF Switch Cont To Limited DDYMCBLB QLSTCBLB | X | X | X | X | X |
DDYMCNVQ Max DDF Conversations Queued DDYMCNVQ QLSTCNVQ | X | X | X | X | X |
DDYMCNVR Max. DDF Convs. Received From Remote DDYMCNVR QLSTCNVR | X | X | X | X | X |
DDYMCOMR Max. DDF COMMITs Received From Remote DDYMCOMR QLSTCOMR | X | X | X | X | X |
DDYMCOMS Max. DDF DB2 COMMITs Sent To Remote DDYMCOMS QLSTCOMS | X | X | X | X | X |
DDYMMSGR Max. DDF Messages Received From Remote DDYMMSGR QLSTMSGR | X | X | X | X | X |
DDYMMSGS Max. DDF Messages Sent To Remote DDYMMSGS QLSTMSGS | X | X | X | X | X |
DDYMRBND Max DDF SQL Bound for Remote DDYMRBND QLSTRBND | X | X | X | X | X |
DDYMROWR Max. DDF Data Rows Received From Remote DDYMROWR QLSTROWR | X | X | X | X | X |
DDYMROWS Max. DDF Data Rows Sent To Remote DDYMROWS QLSTROWS | X | X | X | X | X |
DDYMSGR DDF Messages Received From Remote DDYMSGR QLSTMSGR | X | X | X | X | X |
DDYMSGS DDF Messages Sent To Remote DDYMSGS QLSTMSGS | X | X | X | X | X |
DDYMSQLR Max. DDF SQL Stmts. Received From Remote DDYMSQLR QLSTSQLR | X | X | X | X | X |
DDYMSQLS Max. DDF SQL Stmts. Sent To Remote DDYMSQLS QLSTSQLS | X | X | X | X | X |
DDYMTRNR Max. DDF Trans. Received From Remote DDYMTRNR QLSTTRNR | X | X | X | X | X |
DDYMTRNS Max. DDF Trans. Sent To Remote DDYMTRNS QLSTTRNS | X | X | X | X | X |
DDYPRRC DDF Prepare Requests Received from the DDYPRRC QLSTPRRC | X | X | X | X | X |
DDYPRSE DDF Prepare Requests Sent to the DDYPRSE QLSTPRSE | X | X | X | X | X |
DDYRBND DDF SQL Bound for Remote DDYRBND QLSTRBND | X | X | X | X | X |
DDYRBTR DDF Number of Rollback Operations DDYRBTR QLSTRBTR | X | X | X | X | X |
DDYROWR DDF Data Rows Received From Remote DDYROWR QLSTROWR | X | X | X | X | X |
DDYROWS DDF Data Rows Sent To Remote DDYROWS QLSTROWS | X | X | X | X | X |
DDYRRRC DDF Forget Responses Received from DDYRRRC QLSTRRRC | X | X | X | X | X |
DDYRRSE DDF Forget Responses Sent to the DDYRRSE QLSTRRSE | X | X | X | X | X |
DDYSQLR DDF SQL Statements Received From Remote DDYSQLR QLSTSQLR | X | X | X | X | X |
DDYSQLS DDF SQL Statements Sent To Remote DDYSQLS QLSTSQLS | X | X | X | X | X |
DDYTRNR DDF Transactions Received From Remote DDYTRNR QLSTTRNR | X | X | X | X | X |
DDYTRNS DDF Transactions Sent To Remote DDYTRNS QLSTTRNS | X | X | X | X | X |
DDYVNRC DDF Backout Responses Received from DDYVNRC QLSTVNRC | X | X | X | X | X |
DDYVNSE DDF Backout Responses Sent to DDYVNSE QLSTVNSE | X | X | X | X | X |
DDYVYRC DDF Request Commit Responses received DDYVYRC QLSTVYRC | X | X | X | X | X |

338 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DDYVYSE DDF Request Commit Responses sent to DDYVYSE QLSTVYSE | X | X | X | X | X |

----------------------------------------------------------------------------------------------------------------------------------

Chapter 6: DATA SOURCES 339

6.3 Data Element/Data Source Cross-Reference

The DB2DPP (DB2 Package/DBRM Activity) File

340 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ACE DB2 Agent Control Element DB2ACE QWHSACE | X | X | X | X | X |
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2AUTH Authorization Identifier DB2AUTH QWHCAID | X | X | X | X | X |
DB2CONN Connection Identifier DB2CONN QWHCCN | X | X | X | X | X |
DB2CORR Correlation Identifier DB2CORR QWHCCV | X | X | X | X | X |
DB2CPU DB2 CPU Time DB2CPU QWHUCPU | X | X | X | X | X |
DB2CRDNT CICS/RRSAF/DB Access Network Name DB2CRDNT QWHCTOKN | X | X | | | |
DB2CRDLU CICS/RRSAF/DB Access LU Name DB2CRDLU QWHCTOKN | X | X | | | |
DB2CRDUV CICS/RRSAF/DB Access Uniqueness Value DB2CRDUV QWHCTOKN | X | X | | | |
DB2DSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2LOCN DDF Local Location ID DB2LOCN QWHSLOCN | X | X | X | X | X |
DB2LUNAM DB2 Logical Unit Name DB2LUNAM QWHSLUNM | X | X | X | X | X |
DB2NETID Network Identifier DB2NETID QWACNID | X | X | X | X | X |
DB2OPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DB2PKNM Package/DBRM Name DB2PKNM QPACCOLN | X | X | X | X | X |
DB2PKNM Package/DBRM Name DB2PKNM QPACCONT | X | X | X | X | X |
DB2PKNM Package/DBRM Name DB2PKNM QPACLOCN | X | X | X | X | X |
DB2PKNM Package/DBRM Name DB2PKNM QPACPKID | X | X | X | X | X |
DB2PKNM Package/DBRM Name DB2PKNM QPACPKNM | X | X | X | X | X |
DB2PLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DB2REQID DDF Requester Location ID DB2REQID QWHDRQNM | X | X | X | X | X |
DB2STCK DB2 Store Clock At End Event DB2STCK QWHSSTCK | X | X | X | X | X |
DB2UNIQ DDF Instance Number Identifier DB2UNIQ QWHSLUUV | X | X | X | X | X |
DPPAAFG Activity Flag DPPAAFG QPACAAFG | X | X | X | X | X |
DPPAANM Name of Activity DPPAANM QPACAANM | X | X | X | X | X |
DPPALGTM Accum Wait Archive Log DPPALGTM QPACALOG | X | X | X | X | X |
DPPALLTM Accum Lock/Latch Time DPPALLTM QPACAWTL | X | X | X | X | X |
DPPALWTM Accum Wait Time - Latch Suspension DPPALWTM QPACAWLH | | | | | X |
DPPARLCT Archive Log Suspensions DPPARLCT QPACALCT | X | X | X | X | X |
DPPASCH Nested Activity Schema Name DPPASCH QPACASCH | X | X | X | X | X |
DPPAWATM Accum Wt Time - Log Reads DPPAWATM QPACAWAR | X | X | X | X | X |
DPPAWBTM Accum Wt Time - TCP/IP LOB Material. DPPAWBTM QPACALBW | | | | X | X |
DPPAWCTM Accum Wt Time - Drain Wait DPPAWCTM QPACAWCL | X | X | X | X | X |
DPPAWDTM Accum Wait Time - Drain Lock DPPAWDTM QPACAWDR | X | X | X | X | X |
DPPAWETM Accum Wait Sync Exec Unit Switch DPPAWETM QPACAWTE | X | X | X | X | X |
DPPAWGTM Accum Wait Time - Sending Messages DPPAWGTM QPACAWTG | X | X | X | X | X |
DPPAWITM Accum I/O Elapsed Time This Thread DPPAWITM QPACAWTI | X | X | X | X | X |
DPPAWJTM Accum Wait Time - Global Lock Contention DPPAWJTM QPACAWTJ | X | X | X | X | X |
DPPAWPTM Accum Wait Time - Latch Contention DPPAWPTM QPACAWTP | X | X | X | X | X |
DPPAWRTM Accum Wait Read Other Time DPPAWRTM QPACAWTR | X | X | X | X | X |
DPPAWSTM Wait Time - Stored Procedure DPPAWSTM QPACCAST | X | | | | X |
DPPAWWTM Accum Wait Write Other Time DPPAWWTM QPACAWTW | X | X | X | X | X |
DPPBEGSC Package/DBRM Beginning Store Clock DPPBEGSC QPACSCB | X | X | X | X | X |
DPPBGTCB Package/DBRM TCB Time at Entry to DB2 DPPBGTCB QPACBJST | X | X | X | X | X |
DPPCLS7 No. Packages/DBRMs With Class 7 Data DPPCLS7 QPACFLGS | X | X | X | X | X |
DPPCLS8 No. Packages/DBRMs With Class 8 Data DPPCLS8 QPACFLGS | X | X | X | X | X |
DPPDBRM Number of DBRMs DPPDBRM QPACFLGS | X | X | X | X | |
DPPENDSC Package/DBRM Ending Store Clock DPPENDSC QPACSCE | X | X | X | X | X |
DPPENTCB Package/DBRM TCB Time At Exit From DB2 DPPENTCB QPACEJST | X | X | X | X | X |
DPPENTEX Entry/Exit Events Processed DPPENTEX QPACARNA | X | X | X | X | X |
DPPFLGS Program Type Execution Flags DPPFLGS QPACFLGS | X | X | X | X | X |
DPPINSP No. Packages Loaded by Stored Proc. DPPINSP QPACFLGS | X | X | X | X | X |
DPPNSTP Number of Native SQL Procedures DPPNSTP QPACAAFG | | | | X | X |
DPPNIUDF Non-Inline User Defined Function DPPNIUDF QPACAAFG | | | | | X |
DPPPACK Number of Packages DPPPACK QPACFLGS | X | X | X | X | |
DPPRLNU No. Threads Roll Data to Pkg Section DPPRLNU QPACRLNU | | | | | X |
DPPRNKCL No. Wait Trace Glbl Cont. Child LLock DB2RNKCL QPACARNK | | | X | X | X |
DPPRNMOL No. Wait Trace Glbl Cont. Other LLock DB2RNMOL QPACARNM | | | X | X | X |
DPPRNNPL No. Wait Trace Glbl Cont. PP PLock DB2RNNPL QPACARNN | | | X | X | X |
DPPRNOPL No. Wait Trace Glbl Cont. PG PLock DB2RNOPL QPACARNO | | | X | X | X |
DPPRNQOL No. Wait Trace Glbl Cont. Other PLock DB2RNQOL QPACARNQ | | | X | X | X |
DPPROLL Package Roll Up Flag DPPROLL QPACFLGS | | | | | X |
DPPRUSM Package Summary Roll Up Flag DPPRUSM QPACFLGS | | | | | X |
DPPSPNS No. Stored Procedures Executed DPPSPNS QPACSPNS | X | X | X | X | X |
DPPSQLC Sql Stmts Issued DPPSQLC QPACSQLC | X | X | X | X | X |
DPPSTPR Number of External Stored Procedures DPPSTPR QPACAAFG | X | X | X | X | X |
DPPSUAC No. Successful Authorization Checks DPPSUAC QPACFLGS | X | X | X | X | X |

Chapter 6: DATA SOURCES 341

6.3 Data Element/Data Source Cross-Reference

DPPSWTCH Number of Package Switches DPPSWTCH QPACSWITCH | | | | X | X |

DPPTCBTM Total TCB Time All Executions DPPTCBTM QPACTJST | X | X | X | X | X |
DPPTREX Number of Trigger Executions DPPTREX QPACAAFG | X | X | X | X | X |
DPPUDNU No. User-Defined Functions Scheduled DPPUDNU QPACUDNU | X | X | X | X | X |
DPPUDSTM Elapsed Time UDF Wait for Available TCB DPPUDSTM QPACUDST | X | | | | |
DPPWATNM Wait Trace Events - Available TCB DPPWATNM QPACCANM | X | | | | |
DPPWATRA Wt Trace for Log Reads DPPWATRA QPACANAR | X | X | X | X | X |
DPPWATRB Wt Trace for TCP/IP LOB Material. DPPWATRB QPACALBC | | | | X | X |
DPPWATRC Wait Trace Events - Claims DPPWATRC QPACARNC | X | X | X | X | X |
DPPWATRD Wait Trace Events - Drain Lock DPPWATRD QPACARND | X | X | X | X | X |
DPPWATRG Wait Trace Events - Sending Messages DPPWATRG QPACARNG | X | X | X | X | X |
DPPWATRJ Wt Trace Events - Global Lock Content DPPWATRJ QPACARNJ | X | X | X | X | X |
DPPWATRL Wait Trace Events - Lock/Latch DPPWATRL QPACARNL | X | X | X | X | X |
DPPWATRP Wt Trace for Latch Contention DPPWATRP QPACARNH | X | X | X | X | X |
DPPWATRR Wait Trace Events - Read Other DPPWATRR QPACARNR | X | X | X | X | X |
DPPWATRW Wait Trace Events - Write Other DPPWATRW QPACARNW | X | X | X | X | X |
DPPWATSE Wait Trace Events - Sync Exec DPPWATSE QPACARNS | X | X | X | X | X |
DPPWATTR Wait Trace Events Processed DPPWATTR QPACARNE | X | X | X | X | X |
DPPWLCTM Glbl Contention Child L-Lock Wait Time DB2WLCTM QPACAWTK | | | X | X | X |
DPPWLGTM Glbl Contention PG P-Lock Wait Time DB2WGLTM QPACAWTO | | | X | X | X |
DPPWLLTM Glbl Contention Other L-Locks Wait Time DB2WLLTM QPACAWTM | | | X | X | X |
DPPWLPTM Glbl Contention PP P-Lock Wait Time DB2WLPTM QPACAWTN | | | X | X | X |
DPPWTEPL Wait Trace Events - Waits on Latches DPPWTEPL QPACANLH | | | | | X |
DPPWTOTM Glbl Contention Other P-Locks Wait Time DB2WTOTM QPACAWTQ | | | X | X | X |
DPPZTCBT Total TCB Time All Executions on zIIP DPPZTCBT QPACCLS7_ZIIP | | | X | X | X |
----------------------------------------------------------------------------------------------------------------------------------

342 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

The DBPDSB (DB2 Buffer Pool Activity) File

Chapter 6: DATA SOURCES 343

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2PID DB2 Buffer Pool Identifier DB2PID QBACPID | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DSBABBP Active Buffers in Buffer Pool DSBABBP QBSTCBA | X | X | X | X | X |
DSBACZ CF Writes Clean Pages DSBACZ QBGLAC | X | X | X | X | X |
DSBADZ CF Reads Prefetch Data Returned DSBADZ QBGLAD | X | X | | | |
DSBARA Pages Moved HPOOL to VPOOL by ADMF DSBARA QBSTARA | X | X | | | |
DSBARF Pages Not Moved via ADMF DSBARF QBSTARF | X | X | | | |
DSBARZ CF Reads Pref No Data Not Suppressed DSBARZ QBGLAR | X | X | | | |
DSBAWA Pages Moved VPOOL to HPOOL by ADMF DSBAWA QBSTAWA | X | X | | | |
DSBAWF Pages for Write Not Moved via ADMF DSBAWF QBSTAWF | X | X | | | |
DSBAWZ CF Writes Changed Pages DSBAWZ QBGLAW | X | X | X | X | X |
DSBBPSO Buffer Pool Data Sets Opened DSBBPSO QBSTDSO | X | X | X | X | X |
DSBCIO Castout I/O Operations DSBCIO QBSTCIO | | | | X | X |
DSBCMZ Read for Castout Multiple Requests DSBCMZ QBGLCM | | | X | X | X |
DSBCNZ Castout Engine Not Available DSBCNZ QBGLCN | X | X | | | |
DSBCRZ Read for Castout Requests DSBCRZ QBGLCR | | | X | X | X |
DSBCTZ Castout Class Threshold Detected DSBCTZ QBGLCT | X | X | X | X | X |
DSBDBPR Physical Database Page Requests DSBDBPR QBSTGET | X | X | X | X | X |
DSBDBPU Database Page Updates DSBDBPU QBSTSWS | X | X | X | X | X |
DSBDIO Async Read I/Os via Dynamic Prefetch DSBDIO QBSTDIO | X | X | X | X | X |
DSBDMCT No. Times DM Critical WPHFWT Reached DSBDMCT QBSTDMC | X | X | X | X | X |
DSBDPF No. Times Dynamic Prefetch Req. DB2DPF QBACDPF | X | X | X | X | X |
DSBDPP Async Page Reads via Dynamic Pref. DSBDPP QBSTDPP | X | X | X | X | X |
DSBDWRT Times Deferred Write Threshold Reached DSBDWRT QBSTDWT | X | X | X | X | X |
DSBDWV Times Vert. Defer. Write Thresh DSBDWV QBSTDWV | X | X | X | X | X |
DSBEXZ Explicit XIs DSBEXZ QBGLEX | X | X | X | X | X |
DSBGGZ GETPAGEs for GBP-Dependent Pagesets DSBGGZ QBGLGG | | X | X | X | X |
DSBGTZ Group BP Castout Threshold Detected DSBGTZ QBGLGT | X | X | X | X | X |
DSBHBE HPOOL Buffers Backed by Exp. Stg. DSBHBE QBSTHBE | X | X | | | |
DSBHPA Successful HPOOL Expand/Contract DSBHPA QBSTHPA | X | X | | | |
DSBHPL No. Buffers Allocated for a HPOOL DSBHPL QBSTHPL | X | X | | | |
DSBHRA Pages Moved Async HPOOL to VPOOL DSBHRA QBSTHRA | X | X | | | |
DSBHRE No. Succ. Sync Req Page HPOOL to VPOOL DB2HRE QBSTHRE | X | X | | | |
DSBHRF Pages Read Failed Page Stolen DB2HRF QBSTHRF | X | X | | | |
DSBHWA Pages Moved Async VPOOL to HPOOL DSBHWA QBSTHWA | X | X | | | |
DSBHWF Pages Write Failed Exp. Stg. Short DB2HWF QBSTHWF | X | X | | | |
DSBHWR No. Req. Move Sync VPOOL to HPOOL DB2HWR QBSTHWR | X | X | | | |
DSBIMWS Count of Immediate Writes System Pages DSBIMWS QBSTIMW | X | X | X | X | X |
DSBJIS Total No. Pref. I/O Streams Denied DSBJIS QBSTJIS | X | X | X | X | X |
DSBLIO Async Read I/Os via List Prefetch DSBLIO QBSTLIO | X | X | X | X | X |
DSBLPF List Prefetch Requested DB2LPF QBSTLPF | X | X | X | X | X |
DSBLPP Async Page Reads via List Prefetch DSBLPP QBSTLPP | X | X | X | X | X |
DSBMAX BP Not Supp Concur WK File DSBMAX QBSTMAX | X | X | X | X | X |
DSBMDZ CF Reads Data Returned DSBMDZ QBGLMD | X | X | X | X | X |
DSBMMRR Media Manager Read Requests DSBMMRR QBSTRIO | X | X | X | X | X |
DSBMRZ CF Reads Data Not Returned Entry DSBMRZ QBGLMR | X | X | X | X | X |
DSBNGT No. GETPAGE Requests Not Satisfied DB2NGT QBSTNGT | X | X | X | X | X |
DSBOSZ Other CF Requests DSBOSZ QBGLOS | X | X | X | X | X |
DSBPCO Pages Written for Castout I/Os DSBPCO QBSTPCO | | | | X | X |
DSBPL1 Total Times Pref. Qty 1/2 Normal DSBPL1 QBSTPL1 | X | X | X | X | X |
DSBPL2 Total Times Pref. Qty 1/4 Normal DSBPL2 QBSTPL2 | X | X | X | X | X |
DSBRCZ Pages Castout to DASD DSBRCZ QBGLRC | X | X | X | X | X |
DSBREEP Prefetch Request Disabled No Read DSBREEP QBSTREE | X | X | X | X | X |
DSBRFXS Read Page-Fixed without Real Storage DSBRFXS QBSTRPI | X | X | X | X | X |
DSBRFZ CF Read Requests No Storage DSBRFZ QBGLRF | X | X | | | |
DSBSIO Sync Read I/Os Seq Access Req DB2SIO QBSTSIO | X | X | X | X | X |
DSBSPDF Prefetch Request Disabled No Buffer DSBSPDF QBSTSPD | X | X | X | X | X |
DSBSPPF Number of Pages Read Due to Prefetch DSBSPPF QBSTSPP | X | X | X | X | X |
DSBSPWR System Pages Written to DASD DSBSPWR QBSTPWS | X | X | X | X | X |
DSBSSEF Storage Shortage Expansion Fails DSBSSEF QBSTXFV | X | X | X | X | X |
DSBSUZ CF Write Engine Not Available DSBSUZ QBGLSU | X | X | | | |
DSBSWZ CF Writes For Changed Pages DSBSWZ QBGLSW | X | X | X | X | X |
DSBTMIG No. Migrated Datasets Encountered DSBTMIG QBSTMIG | X | X | X | X | X |
DSBTPFB WK File Abort - No BP Available DSBTPFB QBSTWMAX | X | X | X | X | X |
DSBTPFC WK PF End - Concur PF of PAGE DSBTPFC QBSTPFDC | X | X | X | X | X |
DSBTPF0 WK PF Abort - 0 PF QTY DSBTPF0 QBSTWKPD | X | X | X | X | X |

344 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSBTPIO No. Prefetch Async Read I/Os DSBTPIO QBSTPIO | X | X | X | X | X |

DSBTRTO No. Recall Time Outs DSBTRTO QBSTRTO | X | X | X | X | X |
DSBVPA Successful VPOOL Expand/Contract DSBVPA QBSTVPA | X | X | X | X | X |
DSBVPL No. Buffers Allocated for a VPOOL DSBVPL QBSTVPL | X | X | X | X | X |
DSBWCZ CF Writes For Clean Pages DSBWCZ QBGLWC | X | X | X | X | X |
DSBWDRP Pages Destruct Read Req DSBWDRP QBSTWDRP | X | X | X | X | X |
DSBWFD Work Files Denied Sort Merge DSBWFD QBSTWFD | X | X | X | X | X |
DSBWFF Poor Sort Merge - Buf Short DSBWFF QBSTWFF | X | X | X | X | X |
DSBWFM Max WK File Alloc Sort Merge DSBWFM QBSTWFM | X | X | X | X | X |
DSBWFR Req Query WK File Sort Merge DSBWFR QBSTWFR | X | X | X | X | X |
DSBWFT Work Files Req Sort Merge DSBWFT QBSTWFT | X | X | X | X | X |
DSBWFXS Write Page Fixed W/O Real Storage DSBWFXS QBSTWPI | X | X | X | X | X |
DSBWFZ CF Write Requests No Storage DSBWFZ QBGLWF | X | X | X | X | X |
DSBWMZ Write and Register Multiple Requests DSBWMZ QBGLWM | | | X | X | X |
DSBWPZ Pages Written via WARM DSBWPZ QBGLWP | | | X | X | X |
DSBWREE No. Times Write Engine Unavailable DSBWREE QBSTWEE | X | X | X | | |
DSBWRMM Write I/Os By Media Manager DSBWRMM QBSTWIO | X | X | X | X | X |
DSBWSZ Write and Register Requests DSBWSZ QBGLWS | | | X | X | X |
DSBXDZ CF Reads Buffer XI DSBXDZ QBGLXD | X | X | X | X | X |
DSBXFL Buffer Not Located -- VPOOL Full DSBXFL QBSTXFL | X | X | X | X | X |
DSBXIS Max No. Concurrent Pref. Streams DSBXIS QBSTXIS | X | X | X | X | X |
DSBXRZ CF Reads Entry Created DSBXRZ QBGLXR | X | X | X | X | X |
------------------------------------------------------------------------------------------------------------------

Chapter 6: DATA SOURCES 345

6.3 Data Element/Data Source Cross-Reference

The DB2DSD (DB2 Database Activity) File

346 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DSDABBP0 Active Buffers in Buffer Pool DSDABBPX QBSTCBA | X | X | X | X | X |
DSDABBP1 Active Buffers in Buffer Pool DSDABBPX QBSTCBA | X | X | X | X | X |
DSDABBP2 Active Buffers in Buffer Pool DSDABBPX QBSTCBA | X | X | X | X | X |
DSDABBP3 Active Buffers in Buffer Pool DSDABBPX QBSTCBA | X | X | X | X | X |
DSDACHG Change Request Count DSDACHG QTXACHG | X | X | X | X | X |
DSDACHUS Highest CPU 16 Microseconds Used DSDACHUS QTXACHUS | X | X | X | X | X |
DSDACLMT Limit In CPU 16 Microseconds DSDACLMT QTXACLMT | X | X | X | X | X |
DSDAFLG Flag Byte DSDAFLG QTXAFLG1 | X | X | X | X | X |
DSDAIRLM Other IRLM Request Count DSDAIRLM QTXAIRLM | X | X | X | X | X |
DSDALDAB No. of ALTER DATABASE Stmts DSDALDAB QXALDAB | X | X | X | X | X |
DSDALLOC Successful Bound Plan Allocations DSDALLOC QTALLOC | X | X | X | X | X |
DSDALOCA Requests to Allocate Bound Plan DSDALOCA QTALLOCA | X | X | X | X | X |
DSDALOCC ALLOCATE CURSOR Statements Executed DSDALOCC QXALOCC | X | X | X | X | X |
DSDALOCK Lock Request Count DSDALOCK QTXALOCK | X | X | X | X | X |
DSDALOCL Associate Locator Statement Executed DSDALOCL QXALOCL | X | X | X | X | X |
DSDALPRO Number of Alter Procedure Statements DSDALPRO QXALPRO | X | X | X | X | X |
DSDALSEQ Alter Sequence Statements DSDALSEQ QXALTSEQ | | | X | X | X |
DSDALTIX ALTER INDEX Statements DSDALTIX QXALTIX | X | X | X | X | X |
DSDALTJR Alter JAR Statements DB2ALTJR QXAALTJR | | | | X | X |
DSDALTST ALTER STORAGE GROUP Statements DSDALTST QXALTST | X | X | X | X | X |
DSDALTTA ALTER TABLE Statements DSDALTTA QXALTTA | X | X | X | X | X |
DSDALTTS ALTER TABLESPACE Statements DSDALTTS QXALTTS | X | X | X | X | X |
DSDALTTX Alter Trusted Context Statements DB2ALTTX QXALTCTX | | | | X | X |
DSDALTVW Alter View Statements DB2ALTVW QXALTVW | | | X | X | X |
DSDALUDF Number of Alter Function Statements DSDALUDF QXALUDF | X | X | X | X | X |
DSDAPREC How Limit Was Determined DSDAPREC QTXAPREC | X | X | X | X | X |
DSDAQRY Query Request Count DSDAQRY QTXAQRY | X | X | X | X | X |
DSDARA0 Pages Moved HPOOL to VPOOL by ADMF BP0 DSDARAX QBSTARA | X | X | | | |
DSDARA1 Pages Moved HPOOL to VPOOL by ADMF BP1 DSDARAX QBSTARA | X | X | | | |
DSDARA2 Pages Moved HPOOL to VPOOL by ADMF BP2 DSDARAX QBSTARA | X | X | | | |
DSDARA3 Pages Moved HPOOL to VPOOL by ADMF BP3 DSDARAX QBSTARA | X | X | | | |
DSDARF0 Pages Not Moved via ADMF BP0 DSDARFX QBSTARF | X | X | | | |
DSDARF1 Pages Not Moved via ADMF BP1 DSDARFX QBSTARF | X | X | | | |
DSDARF2 Pages Not Moved via ADMF BP2 DSDARFX QBSTARF | X | X | | | |
DSDARF3 Pages Not Moved via ADMF BP3 DSDARFX QBSTARF | X | X | | | |
DSDARLID Resource Limit Table ID DSDARLID QTXARLID | X | X | X | X | X |
DSDASLAT Suspend Count - Latch Conflict DSDASLAT QTXASLAT | X | X | X | X | X |
DSDASLMT Limit In SUs - ASUTIME DSDASLMT QTXASLMT | X | X | X | X | X |
DSDASOTH Suspend Count - Other Conflict DSDASOTH QTXASOTH | X | X | X | X | X |
DSDATNM Active Trace Number Mask DSDATNM QWHSMTN | X | X | X | X | X |
DSDAUCHK Authorization Checks DSDAUCHK QTAUCHK | X | X | X | X | X |
DSDAUD Number of User Defined Functions Exec DSDAUD QXCAUD | X | X | X | X | X |
DSDAUDAB Times UDF Abended DSDAUDAB QXCAUDAB | X | X | X | X | X |
DSDAUDRJ Times UDF was Rejected DSDAUDRJ QXCAUDRJ | X | X | X | X | X |
DSDAUDTO Times UDF Timed out Waiting Schedule DSDAUDTO QXCAUDTO | X | X | X | X | X |
DSDAUNLK Unlock Request Count DSDAUNLK QTXAUNLK | X | X | X | X | X |
DSDAUPUB AUTH Checks Based PUBLIC Auth DSDAUPUB QTAUPUB | X | X | X | X | X |
DSDAUTOB Attempts To AUTOBIND a Pkg DSDAUTOB QTAUTOBA | X | X | X | X | X |
DSDAWA0 Pages Moved VPOOL to HPOOL by ADMF BP0 DSDAWAX QBSTAWA | X | X | | | |
DSDAWA1 Pages Moved VPOOL to HPOOL by ADMF BP1 DSDAWAX QBSTAWA | X | X | | | |
DSDAWA2 Pages Moved VPOOL to HPOOL by ADMF BP2 DSDAWAX QBSTAWA | X | X | | | |
DSDAWA3 Pages Moved VPOOL to HPOOL by ADMF BP3 DSDAWAX QBSTAWA | X | X | | | |
DSDAWF0 Pages for Write Not Moved via ADMF BP0 DSDAWFX QBSTAWF | X | X | | | |
DSDAWF1 Pages for Write Not Moved via ADMF BP1 DSDAWFX QBSTAWF | X | X | | | |
DSDAWF2 Pages for Write Not Moved via ADMF BP2 DSDAWFX QBSTAWF | X | X | | | |
DSDAWF3 Pages for Write Not Moved via ADMF BP3 DSDAWFX QBSTAWF | X | X | | | |
DSDBIND Successful Automatic Binds DSDBIND QTABIND | X | X | X | X | X |
DSDBINDA Automatic Bind Attempts DSDBINDA QTABINDA | X | X | X | X | X |
DSDBNDAA Bind Action ADD Subcommands DSDBNDAA QTBINDA | X | X | X | X | X |
DSDBNDAR Bind Action REPLACE Subcommands DSDBNDAR QTBINDR | X | X | X | X | X |
DSDBNDPA BIND (ADD) PACKAGE Sub-Cmnds DSDBNDPA QTBINDPA | X | X | X | X | X |
DSDBNDPR BIND (REP) PACKAGE Sub-Cmnds DSDBNDPR QTBINDPR | X | X | X | X | X |
DSDBPNX Parallel Groups Run Cross Data Share DSDBPNX QXXCBPNX | X | X | X | X | X |
DSDBPSO0 Buffer Pool Data Sets Opened DSDBPSOX QBSTDSO | X | X | X | X | X |
DSDBPSO1 Buffer Pool Data Sets Opened DSDBPSOX QBSTDSO | X | X | X | X | X |

Chapter 6: DATA SOURCES 347

6.3 Data Element/Data Source Cross-Reference

DSDBPSO2 Buffer Pool Data Sets Opened DSDBPSOX QBSTDSO | X | X | X | X | X |

DSDBPSO3 Buffer Pool Data Sets Opened DSDBPSOX QBSTDSO | X | X | X | X | X |
DSDCALL SQL CALL Statements Executed DSDCALL QXCALL | X | X | X | X | X |
DSDCALLA Times Stored Procedure Abended DSDCALLA QXCALLAB | X | X | X | X | X |
DSDCALLR Times SQL CALL Stmt Was Rejected DSDCALLR QXCALLRJ | X | X | X | X | X |
DSDCALLT Times SQL CALL Stmt Timed Out DSDCALLT QXCALLTO | X | X | X | X | X |
DSDCDIST Create Distinct Type Statements DSDCDIST QXCDIST | X | X | X | X | X |
DSDCHNP Changep Requests DSDCHNP QTGSCHNP | X | X | X | X | X |
DSDCLNO Number of Claim Requests DSDCLNO QTXACLNO | X | X | X | X | X |
DSDCLOSE CLOSE Statements DSDCLOSE QXCLOSE | X | X | X | X | X |
DSDCLUN Number of Unsuccessful Claim Requests DSDCLUN QTXACLUN | X | X | X | X | X |
DSDCMTON COMMENT ON Statements DSDCMTON QXCMTON | X | X | X | X | X |
DSDCOLS Invalid Select Procedure Encountered DSDCOLS QISTCOLS | X | X | X | X | X |
DSDCON1 Number of Connect Type 1 Statements DSDCON1 QXCON1 | X | X | X | X | X |
DSDCON2 Number of Connect Type 2 Statements DSDCON2 QXCON2 | X | X | X | X | X |
DSDCRAL Create Alias DSDCRAL QXCRALS | X | X | X | X | X |
DSDCRATB Create AUX Table Statements DSDCRATB QXCRATB | X | X | X | X | X |
DSDCRCTX Create Trusted Context Statements DB2CRCTX QXCRCTX | | | | X | X |
DSDCRDAB CREATE DATABASE Statements DSDCRDAB QXCRDAB | X | X | X | X | X |
DSDCRGTT Create Global Temporary Table DSDCRGTT QXCRGTT | X | X | X | X | X |
DSDCRINX CREATE INDEX Statements DSDCRINX QXCRINX | X | X | X | X | X |
DSDCRPRO Create Procedure Statements DSDCRPRO QXCRPRO | X | X | X | X | X |
DSDCRROL Create Role Statements DB2CRROL QXCRROL | | | | X | X |
DSDCRSEQ Create Sequence Statements DSDCRSEQ QXCRESEQ | | | X | X | X |
DSDCRSTG CREATE STORAGE GROUP Statements DSDCRSTG QXCRSTG | X | X | X | X | X |
DSDCRSYN CREATE SYNONYM Statements DSDCRSYN QXCRSYN | X | X | X | X | X |
DSDCRTAB CREATE TABLE Statements DSDCRTAB QXCRTAB | X | X | X | X | X |
DSDCRUDF Create Function Statements DSDCRUDF QXCRUDF | X | X | X | X | X |
DSDCSLM Change Requests Propagated to XES DSDCSLM QTGSCSLM | X | X | X | X | X |
DSDCTABS CREATE TABLESPACE Statements DSDCTABS QXCTABS | X | X | X | X | X |
DSDCTRIG Number of Create Triggers DSDCTRIG QXCTRIG | X | X | X | X | X |
DSDCWLD Times Duplicate Concentrate Dyna Stmnts DB2CWLD QXSTCWLD | X | X | X | X | X |
DSDCWLM Times Matched Concentrate Dyna Stmnts DB2CWLM QXSTCWLM | X | X | X | X | X |
DSDCWLP Times Parsed Concentrate Dyna Stmnts DB2CWLP QXSTCWLP | X | X | X | X | X |
DSDCWLR Times Replaced Concentrate Dyna Stmnts DB2CWLR QXSTCWLR | X | X | X | X | X |
DSDDBDG Requests for Database Descriptors DSDDBDG QISEDBDG | X | X | X | X | X |
DSDDBDL Number of Loads of Database Descriptors DSDDBDL QISEDBDL | X | X | X | X | X |
DSDDBPR0 Physical Database Page Requests DSDDBPRX QBSTGET | X | X | X | X | X |
DSDDBPR1 Physical Database Page Requests DSDDBPRX QBSTGET | X | X | X | X | X |
DSDDBPR2 Physical Database Page Requests DSDDBPRX QBSTGET | X | X | X | X | X |
DSDDBPR3 Physical Database Page Requests DSDDBPRX QBSTGET | X | X | X | X | X |
DSDDBPU0 Database Page Updates DSDDBPUX QBSTSWS | X | X | X | X | X |
DSDDBPU1 Database Page Updates DSDDBPUX QBSTSWS | X | X | X | X | X |
DSDDBPU2 Database Page Updates DSDDBPUX QBSTSWS | X | X | X | X | X |
DSDDBPU3 Database Page Updates DSDDBPUX QBSTSWS | X | X | X | X | X |
DSDDCGTT Declare Global Temporary Table Stmts DSDDCGTT QXDCLGTT | X | X | X | X | X |
DSDDDIST Drop Distinct Type Statements DSDDDIST QXDDIST | X | X | X | X | X |
DSDDEAD Deadlock Count DSDDEAD QTXADEA | X | X | X | X | X |
DSDDEFVU CREATE VIEW Statements DSDDEFVU QXDEFVU | X | X | X | X | X |
DSDDELET DELETE Statements DSDDELET QXDELET | X | X | X | X | X |
DSDDESC DESCRIBE Statements DSDDESC QXDESC | X | X | X | X | X |
DSDDEXP PREPARE Discarded DSDDEXP QXSTDEXP | X | X | X | X | X |
DSDDGBUF Total Number of Parallel Groups That DSDDGBUF QXDEGBUF | X | X | X | X | X |
DSDDGCUR Parallel Groups to Seq Cursor Update DSDDGCUR QXDEGCUR | X | X | X | X | X |
DSDDGESA Parallel Groups to Seq No ESA Sort DSDDGESA QXDEGESA | X | X | X | X | X |
DSDDINV PREPARE Purged DSDDINV QXSTDINV | X | X | X | X | X |
DSDDIO0 Async Read I/Os via Dynamic Pref. BP0 DSDDIOX QBSTDIO | X | X | X | X | X |
DSDDIO1 Async Read I/Os via Dynamic Pref. BP1 DSDDIOX QBSTDIO | X | X | X | X | X |
DSDDIO2 Async Read I/Os via Dynamic Pref. BP2 DSDDIOX QBSTDIO | X | X | X | X | X |
DSDDIO3 Async Read I/Os via Dynamic Pref. BP3 DSDDIOX QBSTDIO | X | X | X | X | X |
DSDDLRU Number of Stealable DB Descriptors DSDDLRU QISEDLRU | | | | | X |
DSDDMCT0 No. Times DM Critical WPHFWT reached 0 DSDDMCTX QBSTDMC | X | X | X | X | X |
DSDDMCT1 No. Times DM Critical WPHFWT reached 1 DSDDMCTX QBSTDMC | X | X | X | X | X |
DSDDMCT2 No. Times DM Critical WPHFWT reached 2 DSDDMCTX QBSTDMC | X | X | X | X | X |
DSDDMCT3 No. Times DM Critical WPHFWT reached 3 DSDDMCTX QBSTDMC | X | X | X | X | X |
DSDDPF0 No. Times Dynamic Prefetch Req. BP0 DB2DPFX QBACDPF | X | X | X | X | X |
DSDDPF1 No. Times Dynamic Prefetch Req BP1 DB2DPFX QBACDPF | X | X | X | X | X |
DSDDPF2 No. Times Dynamic Prefetch Req BP2 DB2DPFX QBACDPF | X | X | X | X | X |
DSDDPF3 No. Times Dynamic Prefetch Req BP3 DB2DPFX QBACDPF | X | X | X | X | X |
DSDDPP0 Async Page Reads via Dynamic Pref. BP0 DSDDPPX QBSTDPP | X | X | X | X | X |
DSDDPP1 Async Page Reads via Dynamic Pref. BP1 DSDDPPX QBSTDPP | X | X | X | X | X |
DSDDPP2 Async Page Reads via Dynamic Pref. BP2 DSDDPPX QBSTDPP | X | X | X | X | X |
DSDDPP3 Async Page Reads via Dynamic Pref. BP3 DSDDPPX QBSTDPP | X | X | X | X | X |
DSDDRAL Drop Alias DSDDRAL QXDRPAL | X | X | X | X | X |

348 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSDDRNO Number of Drain Requests DSDDRNO QTXADRNO | X | X | X | X | X |

DSDDRPDB DROP DATABASE Statements DSDDRPDB QXDRPDB | X | X | X | X | X |
DSDDRPFN Number of Drop User Defined Function DSDDRPFN QXDRPFN | X | X | X | X | X |
DSDDRPIX DROP INDEX Statements DSDDRPIX QXDRPIX | X | X | X | X | X |
DSDDRPKG No. of DROP PACKAGE Stmts DSDDRPKG QXDRPPKG | X | X | X | X | X |
DSDDRPPR Number of Drop Procedures DSDDRPPR QXDRPPR | X | X | X | X | X |
DSDDRPRO Drop Role Statements DB2DRPRO QXDRPROL | | | | X | X |
DSDDRPST DROP STORAGE GROUP Statements DSDDRPST QXDRPST | X | X | X | X | X |
DSDDRPSY DROP SYNONYM Statements DSDDRPSY QXDRPSY | X | X | X | X | X |
DSDDRPTA DROP TABLE Statements DSDDRPTA QXDRPTA | X | X | X | X | X |
DSDDRPTR Number of Drop Triggers DSDDRPTR QXDRPTR | X | X | X | X | X |
DSDDRPTS DROP TABLESPACE Statements DSDDRPTS QXDRPTS | X | X | X | X | X |
DSDDRPTX Drop Trusted Context Statements DB2DRPTX QXDRPCTX | | | | X | X |
DSDDRPVU DROP VIEW Statements DSDDRPVU QXDRPVU | X | X | X | X | X |
DSDDRSEQ Drop Sequence Statements DSDDRSEQ QXDROSEQ | | | X | X | X |
DSDDRTA Global Requests Denied DSDDRTA QTGSDRTA | X | X | X | X | X |
DSDDRUN Number of Unsuccessful Drain Requests DSDDRUN QTXADRUN | X | X | X | X | X |
DSDDSCRT No. of DESCRIBE TABLE Stmts DSDDSCRT QXDSCRTB | X | X | X | X | X |
DSDDSDRN DDs That Drain Has Produced DSDDSDRN QTDSDRN | X | X | X | X | X |
DSDDSOPN Data Sets Currently Open DSDDSOPN QTDSOPN | X | X | X | X | X |
DSDDSPBD Plans Bound and Kept DSDDSPBD QTPLNBD | X | X | X | X | X |
DSDDSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DSDDWRT0 Times Deferred Write Threshold Reached DSDDWRTX QBSTDWT | X | X | X | X | X |
DSDDWRT1 Times Deferred Write Threshold Reached DSDDWRTX QBSTDWT | X | X | X | X | X |
DSDDWRT2 Times Deferred Write Threshold Reached DSDDWRTX QBSTDWT | X | X | X | X | X |
DSDDWRT3 Times Deferred Write Threshold Reached DSDDWRTX QBSTDWT | X | X | X | X | X |
DSDDWV0 Times Vert. Defer. Write Thresh BP0 DSDDWVX QBSTDWV | X | X | X | X | X |
DSDDWV1 Times Vert. Defer. Write Thresh BP1 DSDDWVX QBSTDWV | X | X | X | X | X |
DSDDWV2 Times Vert. Defer. Write Thresh BP2 DSDDWVX QBSTDWV | X | X | X | X | X |
DSDDWV3 Times Vert. Defer. Write Thresh BP3 DSDDWVX QBSTDWV | X | X | X | X | X |
DSDECFAL No. of Failures: Full Statement Pool DSDECFAL QISECFAL | | | X | X | X |
DSDECFRE No. of Free Pages in Statement Pool DSDECFRE QISECFRE | | | X | X | X |
DSDECPGE No. of Pages in Statement Pool DSDECPGE QISECPGE | | | X | X | X |
DSDECTA Pages Used for Cursor Tables Above 2GB DSDECTA QISECTA | | | | X | X |
DSDECTG Requests for Cursor Table Sections DSDECTG QISECTG | X | X | X | X | X |
DSDECTL Number of Loaded Cursor Table Sections DSDECTL QISECTL | X | X | X | X | X |
DSDECTU Pages Used for Cursor Tables Below 2GB DSDECTU QISECT | X | X | X | X | |
DSDEDBD Number of Pages Used for DBD DSDEDBD QISEDBD | X | X | X | X | X |
DSDEDFAL Number of Fails Due to Dataspace Full DSDEDFAL QISEDFAL | X | X | X | X | X |
DSDEDFRE Number of Free pages in Dataspace DSDEDFRE QISEDFRE | X | X | X | X | X |
DSDEDPGE Number of Pages in EDM Dataspace DSDEDPGE QISEDPGE | X | X | X | X | X |
DSDEDSC Number of Pages used for Cache DSDEDSC QISEDSC | X | X | | | |
DSDEDSG Number of Requests for Dynamic Cache DSDEDSG QISEDSG | X | X | X | X | X |
DSDEDSI Number of Inserts for Dynamic Cache DSDEDSI QISEDSI | X | X | X | X | X |
DSDEDYNP No. of Pages Used in Statement Pool DSDEDYNP QISEDYNP | | | X | X | X |
DSDEFAL Number of Failures Due to Full EDM Pool DSDEFAL QISEFAIL | X | X | X | X | X |
DSDEGENC Parallel Groups Executed Sequential DSDEGENC QXDEGENC | X | X | X | X | X |
DSDEKFAL No. of Failures: Full Skeleton Pool DSDEKFAL QISEKFAL | | | | X | X |
DSDEKFRE No. of Free Pages in Skeleton Pool DSDEKFRE QISEKFRE | | | | X | X |
DSDEKNFA NOT FOUND Records Added to EDM Cache DSDEKNFA QISEKNFA | | | | X | X |
DSDEKNFM NOT FOUND Records in EDM Cache DSDEKNFM QISEKNFM | | | | X | X |
DSDEKNFR NOT FOUND Recs. Removed from EDM Cache DSDEKNFR QISEKNFR | | | | X | X |
DSDEKPGE No. of Pages in Skeleton Pool DSDEKPGE QISEKPGE | | | | X | X |
DSDEPTA Pages Used for Package Tables Above 2GB DSDEPTA QISEKTA | | | | X | X |
DSDEPTG No. Req for Package Table Sections DSDEPTG QISEKTG | X | X | X | X | X |
DSDEPTL No. Loaded Package Table Sections DSDEPTL QISEKTL | X | X | X | X | X |
DSDEPTU Pages Used for Package Tables Below 2GB DSDEPTU QISEKT | X | X | X | X | |
DSDESFAL No. of Failures: Full Stmt (>2GB) Pool DSDESFAL QISESFAL | | | | X | X |
DSDESFRE No. of Free Pages in Stmt (>2GB) Pool DSDESFRE QISESFRE | | | | X | X |
DSDESKC No. Free Pages Used for SKCT Table DSDESKC QISESKCT | X | X | X | X | X |
DSDESKP No. Free Pages Used for SKPT Table DSDESKP QISESKPT | X | X | X | X | X |
DSDESPGE No. of Pages in Statement (>2GB) Pool DSDESPGE QISESPGE | | | | X | X |
DSDESTMT No. of Statements in EDM Pool DSDESTMT QISESTMT | | | X | X | X |
DSDFETCH Number of FETCH Statements DSDFETCH QXFETCH | X | X | X | X | X |
DSDFLSE No. of False Contentions DSDFLSE QTGSFLSE | X | X | X | X | X |
DSDFND PREPARE Request Satisfied DSDFND QXSTFND | X | X | X | X | X |
DSDFREAP Attempts To FREE a Package DSDFREAP QTFREEAP | X | X | X | X | X |
DSDFREE FREE Subcommands DSDFREE QTFREE | X | X | X | X | X |
DSDFREEA Attempts to FREE Plan DSDFREEA QTFREEA | X | X | X | X | X |
DSDFREEL Free Locator Statements DSDFREEL QXFREEL | X | X | X | X | X |
DSDFREEP Plan Successfully Freed DSDFREEP QTPLNFRD | X | X | X | X | X |
DSDFREPK FREE PACKAGE Sub-Cmnds DSDFREPK QTFREEP | X | X | X | X | X |
DSDFRIDS Times RID List Overflowed RID Storage DB2FRIDS QXWFRIDS | | | | | X |
DSDFRIDT Times RID List Overflowed RID Exceeded DB2FRIDT QXWFRIDT | | | | | X |

Chapter 6: DATA SOURCES 349

6.3 Data Element/Data Source Cross-Reference

DSDFRPG Number of Free Pages in Free Chain DSDFRPG QISEFREE | X | X | X | X | |

DSDGRANT GRANT Statements DSDGRANT QXGRANT | X | X | X | X | X |
DSDHBE0 HPOOL Buffers Backed by Exp. Stg. BP0 DSDHBEX QBSTHBE | X | X | | | |
DSDHBE1 HPOOL Buffers Backed by Exp. Stg. BP1 DSDHBEX QBSTHBE | X | X | | | |
DSDHBE2 HPOOL Buffers Backed by Exp. Stg. BP2 DSDHBEX QBSTHBE | X | X | | | |
DSDHBE3 HPOOL Buffers Backed by Exp. Stg. BP3 DSDHBEX QBSTHBE | X | X | | | |
DSDHOLDL Hold Locator Statements DSDHOLDL QXHOLDL | X | X | X | X | X |
DSDHPA0 Successful HPOOL Expand/Contract BP0 DSDHPAX QBSTHPA | X | X | | | |
DSDHPA1 Successful HPOOL Expand/Contract BP1 DSDHPAX QBSTHPA | X | X | | | |
DSDHPA2 Successful HPOOL Expand/Contract BP2 DSDHPAX QBSTHPA | X | X | | | |
DSDHPA3 Successful HPOOL Expand/Contract BP3 DSDHPAX QBSTHPA | X | X | | | |
DSDHPL0 No. Buffers Allocated for a HPOOL BP0 DSDHPLX QBSTHPL | X | X | | | |
DSDHPL1 No. Buffers Allocated for a HPOOL BP1 DSDHPLX QBSTHPL | X | X | | | |
DSDHPL2 No. Buffers Allocated for a HPOOL BP2 DSDHPLX QBSTHPL | X | X | | | |
DSDHPL3 No. Buffers Allocated for a HPOOL BP3 DSDHPLX QBSTHPL | X | X | | | |
DSDHRA0 Pages Moved Async HPOOL to VPOOL BP0 DSDHRAX QBSTHRA | X | X | | | |
DSDHRA1 Pages Moved Async HPOOL to VPOOL BP1 DSDHRAX QBSTHRA | X | X | | | |
DSDHRA2 Pages Moved Async HPOOL to VPOOL BP2 DSDHRAX QBSTHRA | X | X | | | |
DSDHRA3 Pages Moved Async HPOOL to VPOOL BP3 DSDHRAX QBSTHRA | X | X | | | |
DSDHRE0 No. Sync Req Page HPOOL to VPOOL BP0 DB2HREX QBACHRE | X | X | | | |
DSDHRE1 No. Sync Req Page HPOOL to VPOOL BP1 DB2HREX QBACHRE | X | X | | | |
DSDHRE2 No. Sync Req Page HPOOL to VPOOL BP2 DB2HREX QBACHRE | X | X | | | |
DSDHRE3 No. Sync Req Page HPOOL to VPOOL BP3 DB2HREX QBACHRE | X | X | | | |
DSDHRF0 No. Unsuccessful Read Req Exp Stg BP0 DB2HRFX QBACHRF | X | X | | | |
DSDHRF1 No. Unsuccessful Read Req Exp Stg BP1 DB2HRFX QBACHRF | X | X | | | |
DSDHRF2 No. Unsuccessful Read Req Exp Stg BP2 DB2HRFX QBACHRF | X | X | | | |
DSDHRF3 No. Unsuccessful Read Req Exp Stg BP3 DB2HRFX QBACHRF | X | X | | | |
DSDHWA0 Pages Moved Async Vpool to HPOOL BP0 DSDHWAX QBSTHWA | X | X | | | |
DSDHWA1 Pages Moved Async Vpool to HPOOL BP1 DSDHWAX QBSTHWA | X | X | | | |
DSDHWA2 Pages Moved Async Vpool to HPOOL BP2 DSDHWAX QBSTHWA | X | X | | | |
DSDHWA3 Pages Moved Async Vpool to HPOOL BP3 DSDHWAX QBSTHWA | X | X | | | |
DSDHWF0 No. Unsuccessful Write Req Exp Stg BP0 DB2HWFX QBACHWF | X | X | | | |
DSDHWF1 No. Unsuccessful Write Req Exp Stg BP1 DB2HWFX QBACHWF | X | X | | | |
DSDHWF2 No. Unsuccessful Write Req Exp Stg BP2 DB2HWFX QBACHWF | X | X | | | |
DSDHWF3 No. Unsuccessful Write Req Exp Stg BP3 DB2HWFX QBACHWF | X | X | | | |
DSDHWR0 No. Sync Req Move VPOOL to HPOOL BP0 DB2HWRX QBACHWR | X | X | | | |
DSDHWR1 No. Sync Req Move VPOOL to HPOOL BP1 DB2HWRX QBACHWR | X | X | | | |
DSDHWR2 No. Sync Req Move VPOOL to HPOOL BP2 DB2HWRX QBACHWR | X | X | | | |
DSDHWR3 No. Sync Req Move VPOOL to HPOOL BP3 DB2HWRX QBACHWR | X | X | | | |
DSDIGLO Suspends Due to IRLM Global Contention DSDIGLO QTGSIGLO | X | X | X | X | X |
DSDIMWS0 Count of Immediate Writes Sys Pages 0 DSDIMWSX QBSTIMW | X | X | X | X | X |
DSDIMWS1 Count of Immediate Writes Sys Pages 1 DSDIMWSX QBSTIMW | X | X | X | X | X |
DSDIMWS2 Count of Immediate Writes Sys Pages 2 DSDIMWSX QBSTIMW | X | X | X | X | X |
DSDIMWS3 Count of Immediate Writes Sys Pages 3 DSDIMWSX QBSTIMW | X | X | X | X | X |
DSDINCRB Incremental Binds DSDINCRB QXINCRB | X | X | X | X | X |
DSDINSRT INSERT Statements DSDINSRT QXINSRT | X | X | X | X | X |
DSDIPRP Implicit PREPARE Performed DSDIPRP QXSTIPRP | X | X | X | X | X |
DSDISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DSDJINCS Times RID List Append RID Storage DB2JINCS QXHJINCS | | | | | X |
DSDJINCT Times RID List Append RID Exceeded DB2JINCT QXHJINCT | | | | | X |
DSDJIS0 Total No. Pref. I/O Streams Denied BP0 DSDJISX QBSTJIS | X | X | X | X | X |
DSDJIS1 Total No. Pref. I/O Streams Denied BP1 DSDJISX QBSTJIS | X | X | X | X | X |
DSDJIS2 Total No. Pref. I/O Streams Denied BP2 DSDJISX QBSTJIS | X | X | X | X | X |
DSDJIS3 Total No. Pref. I/O Streams Denied BP3 DSDJISX QBSTJIS | X | X | X | X | X |
DSDKIDS Locks Propagated By IRLM to XES SYNC DSDKIDS QTGSKIDS | X | X | X | X | X |
DSDKLRU Number of Stealable Skeleton Pkg Table DSDKLRU QISEKLRU | | | | | X |
DSDKSPA Number of Pages Alloc for Exec Procs DSDKSPA QISEKSPA | | | | | X |
DSDLABEL Number of LABEL ON Statements DSDLABEL QXLABON | X | X | X | X | X |
DSDLEEM Count of Escalations to Exclusive Mode DSDLEEM QTXALEX | X | X | X | X | X |
DSDLESM Number of Lock Escalations to Shared DSDLESM QTXALES | X | X | X | X | X |
DSDLIO0 Async Read I/Os via List Prefetch BP0 DSDLIOX QBSTLIO | X | X | X | X | X |
DSDLIO1 Async Read I/Os via List Prefetch BP1 DSDLIOX QBSTLIO | X | X | X | X | X |
DSDLIO2 Async Read I/Os via List Prefetch BP2 DSDLIOX QBSTLIO | X | X | X | X | X |
DSDLIO3 Async Read I/Os via List Prefetch BP3 DSDLIOX QBSTLIO | X | X | X | X | X |
DSDLOCK LOCK TABLE Statements DSDLOCK QXLOCK | X | X | X | X | X |
DSDLPF0 No. List Prefetch Requested BP0 DB2LPFX QBSTLPF | X | X | X | X | X |
DSDLPF1 No. List Prefetch Requested BP1 DB2LPFX QBSTLPF | X | X | X | X | X |
DSDLPF2 No. List Prefetch Requested BP2 DB2LPFX QBSTLPF | X | X | X | X | X |
DSDLPF3 No. List Prefetch Requested BP3 DB2LPFX QBSTLPF | X | X | X | X | X |
DSDLPLK Lock Requests for Physical Locks DSDLPLK QTGSLPLK | X | X | X | X | X |
DSDLPP0 Async Page Reads via List Prefetch BP0 DSDLPPX QBSTLPP | X | X | X | X | X |
DSDLPP1 Async Page Reads via List Prefetch BP1 DSDLPPX QBSTLPP | X | X | X | X | X |
DSDLPP2 Async Page Reads via List Prefetch BP2 DSDLPPX QBSTLPP | X | X | X | X | X |
DSDLPP3 Async Page Reads via List Prefetch BP3 DSDLPPX QBSTLPP | X | X | X | X | X |

350 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSDLSLM Lock Requests Propagated to XES DSDLSLM QTGSLSLM | X | X | X | X | X |

DSDMAX0 BP Not Supp Concur WK File DSDMAXX QBSTMAX | X | X | X | X | X |
DSDMAX1 BP Not Supp Concur WK File DSDMAXX QBSTMAX | X | X | X | X | X |
DSDMAX2 BP Not Supp Concur WK File DSDMAXX QBSTMAX | X | X | X | X | X |
DSDMAX3 BP Not Supp Concur WK File DSDMAXX QBSTMAX | X | X | X | X | X |
DSDMERGE Merge Statements DB2MERGE QXMERGE | | | | X | X |
DSDMIXNL Mult Indx Not Used - RID Limit DSDMIXNL QXMRMIAP | X | X | X | X | X |
DSDMIXNU Mult Indx Not Used - No Storage DSDMIXNU QXNSMIAP | X | X | X | X | X |
DSDMIXU Multiple Index Path Used DSDMIXU QXMIAP | X | X | X | X | X |
DSDMMRR0 Media Manager Read Requests DSDMMRRX QBSTRIO | X | X | X | X | X |
DSDMMRR1 Media Manager Read Requests DSDMMRRX QBSTRIO | X | X | X | X | X |
DSDMMRR2 Media Manager Read Requests DSDMMRRX QBSTRIO | X | X | X | X | X |
DSDMMRR3 Media Manager Read Requests DSDMMRRX QBSTRIO | X | X | X | X | X |
DSDMNCFR Min Free Pages in Statement Pool DSDMNCFR QISECFRE | | | X | X | X |
DSDMNDRU Min Stealable DB Descriptors DSDMNDRU QISEDLRU | | | | | X |
DSDMNKFR Min Free Pages in Skeleton Pool DSDMNKFR QISEKFRE | | | | X | X |
DSDMNKRU Min Stealable Skeleton Pkg Table DSDMNKRU QISEKLRU | | | | | X |
DSDMNQCA Min Storage Alloc for Plans (>2GB) Bar DSDMNQCA QISESQCA | | | | | X |
DSDMNQCB Min Storage Alloc for Plans (<2GB) Bar DSDMNQCB QISESQCB | | | | | X |
DSDMNQKA Min Storage Alloc for Pkgs (>2GB) Bar DSDMNQKA QISESQKA | | | | | X |
DSDMNQKB Min Storage Alloc for Pkgs (<2GB) Bar DSDMNQKB QISESQKB | | | | | X |
DSDMNRPG Min Free Pages in Free Chain DSDMNRPG QISEFREE | X | X | X | X | X |
DSDMNSFR Min Free Pages in Statement (>2GB) Pool DSDMNSFR QISESFRE | | | | X | X |
DSDMNSPA Min Pgs Alloc for Exec Procs DSDMNSPA QISEKSPA | | | | | X |
DSDMXBDG Max Requests for DBD DSDMXBDG QISEDBDG | X | X | X | X | X |
DSDMXBDL Max Loads of DBD DSDMXBDL QISEDBDL | X | X | X | X | X |
DSDMXCFA Max Failures: Full Statement Pool DSDMXCFA QISECFAL | | | X | X | X |
DSDMXCFR Max Free Pages in Statement Pool DSDMXCFR QISECFRE | | | X | X | X |
DSDMXCPG Max Pages in Statement Pool DSDMXCPG QISECPGE | | | X | X | X |
DSDMXCTA Max Pages Used for Cursor Tables (>2GB) DSDMXCTA QISECTA | | | | X | X |
DSDMXCTG Max Requests for Cursor Table Section DSDMXCTG QISECTG | X | X | X | X | X |
DSDMXCTL Max Loaded Cursor Table Sections DSDMXCTL QISECTL | X | X | X | X | X |
DSDMXCTU Max Pages Used for Cursor Table (<2GB) DSDMXCTU QISECT | X | X | X | X | X |
DSDMXCUR Max PB Count On Free PB DSDMXCUR QTMAXPB | X | X | X | X | X |
DSDMXDBD Max Pages Used for DBD DSDMXDBD QISEDBD | X | X | X | X | X |
DSDMXDEG Max Degree of Parallelism DSDMXDEG QXMAXDEG | X | X | X | X | X |
DSDMXDRS Max DDs That Drain Has Produced DSDMXDRS QTDSDRN | X | X | X | X | X |
DSDMXDRU Max Stealable Database Descriptors DSDMXDRU QISEDLRU | | | | | X |
DSDMXDSO Max Data Sets Open Concurrently DSDMXDSO QTMAXDS | X | X | X | X | X |
DSDMXDYN Max Pages Used in Statement Pool DSDMXDYN QISEDYNP | | | X | X | X |
DSDMXFAL Max of Failures Due EDM Pool Full DSDMXFAL QISEFAIL | X | X | X | X | X |
DSDMXKFA Max Failures: Full Skeleton Pool DSDMXKFA QISEKFAL | | | | X | X |
DSDMXKFR Max Free Pages in Skeleton Pool DSDMXKFR QISEKFRE | | | | X | X |
DSDMXKPG Max Pages in Skeleton Pool DSDMXKPG QISEKPGE | | | | X | X |
DSDMXKRU Max Stealable Skeleton Pkg Table DSDMXKRU QISEKLRU | | | | | X |
DSDMXNSQ Max Level of Nested SQL Cascading DSDMXNSQ QXCASCDP | X | X | X | X | X |
DSDMXPGE Max Pages in EDM Pool DSDMXPGE QISEPAGE | X | X | X | X | X |
DSDMXPL Maximum Number of Page Locks Held DSDMXPL QTXANPL | X | X | X | X | X |
DSDMXPTA Max Pages Used for Pkg Tables (>2GB) DSDMXPTA QISEKTA | | | | X | X |
DSDMXPTG Max Requests for Package Table Section DSDMXPTG QISEKTG | X | X | X | X | X |
DSDMXPTL Max Loaded Package Table Sections DSDMXPTL QISEKTL | X | X | X | X | X |
DSDMXPTU Max Pages Used for Pkg Tables (<2GB) DSDMXPTU QISEKT | X | X | X | X | X |
DSDMXQCA Max Storage Alloc for Plans (>2GB) Bar DSDMXQCA QISESQCA | | | | | X |
DSDMXQCB Max Storage Alloc for Plans (<2GB) Bar DSDMXQCB QISESQCB | | | | | X |
DSDMXQKA Max Storage Alloc for Pkgs (>2GB) Bar DSDMXQKA QISESQKA | | | | | X |
DSDMXQKB Max Storage Alloc for Pkgs (<2GB) Bar DSDMXQKB QISESQKB | | | | | X |
DSDMXROP Max PB Found on Free Q During Open DSDMXROP QTREOPN | X | X | X | X | X |
DSDMXRPG Max Free Pages in Free Chain DSDMXRPG QISEFREE | X | X | X | X | X |
DSDMXSFA Max Failures: Full Stmt (>2GB) Pool DSDMXSFA QISESFAL | | | | X | X |
DSDMXSFR Max Free Pages in Statement (>2GB) Pool DSDMXSFR QISESFRE | | | | X | X |
DSDMXSKC Max Pages Used for SKCT Table DSDMXSKC QISESKCT | X | X | X | X | X |
DSDMXSKP Max Pages Used for SKPT Table DSDMXSKP QISESKPT | X | X | X | X | X |
DSDMXSLW Max DDs Used for Slow Close TS DSDMXSLW QTSLWDD | X | X | X | X | X |
DSDMXSPA Max Pgs Alloc for Exec Procs DSDMXSPA QISEKSPA | | | | | X |
DSDMXSPG Max Pages in Statement (>2GB) Pool DSDMXSPG QISESPGE | | | | X | X |
DSDMXSTM Max Number of Statements in EDM Pool DSDMXSTM QISESTMT | | | X | X | X |
DSDNFLMT No. Infinite Resource Limit DSDNFLMT QTXAFLG1 | X | X | | | X |
DSDNFND PREPARE Request - No Match DSDNFND QXSTNFND | X | X | X | X | X |
DSDNOGRP Total Number of Parallel Groups That DSDNOGRP QXNORGRP | X | X | X | X | X |
DSDNPRP PREPARE Avoided DSDNPRP QXSTNPRP | X | X | X | X | X |
DSDNTFR Notify Messages Received DSDNTFR QTGSNTFR | X | X | X | X | X |
DSDNTFY Notify Messages Sent DSDNTFY QTGSNTFY | X | X | X | X | X |
DSDNVRID Allocate Requests Nonexistent Plan DSDNVRID QTINVRID | X | X | X | X | X |
DSDOPEN OPEN Statements DSDOPEN QXOPEN | X | X | X | X | X |

Chapter 6: DATA SOURCES 351

6.3 Data Element/Data Source Cross-Reference

DSDORNO Parallel Groups Executed Coordination DSDORNO QXCOORNO | X | X | X | X | X |

DSDORR Parallel Groups Executed Repeat-read DSDORR QXISORR | X | X | X | X | X |
DSDOTPE Negotiate Other Physical Lock DSDOTPE QTGSOTPE | X | X | X | X | X |
DSDPAGE No. Pages in EDM Pool DSDPAGE QISEPAGE | X | X | X | X | |
DSDPCAUT Auth Checks Using Package Auth Cache DSDPCAUT QTPACAUT | X | X | X | X | X |
DSDPCNOT Auth Checks Not Using Package Auth Cach DSDPCNOT QTPACNOT | X | X | X | X | X |
DSDPCOW1 Overwrote Authid In Cache DSDPCOW1 QTPACOW1 | X | X | X | X | X |
DSDPCOW2 Overwrote Package Entry in Cache DSDPCOW2 QTPACOW2 | X | X | X | X | X |
DSDPCPUB Auth Checks for Package Held by Public DSDPCPUB QTPACPUB | X | X | X | X | X |
DSDPCWDP Duplicate Per Parsed Dyna Stmnts DB2PCWDP | | | | | X |
DSDPCWMP Matched Per Parsed Dyna Stmnts DB2PCWMP | | | | | X |
DSDPCWRP Replaced Per Parsed Dyna Stmnts DB2PCWRP | | | | | X |
DSDPEMX Engines Available For Exit Requests DSDPEMX QTGSPEMX | X | X | X | X | X |
DSDPEQW Times Engine Not Available For Exit DSDPEQW QTGSPEQW | X | X | X | X | X |
DSDPGDTT Parallel GPS Using UDF - Ex. Single DB2 DSDPGDTT QXDEGDTT | X | X | X | X | X |
DSDPGPE Negotiate Page Physical Lock DSDPGPE QTGSPGPE | X | X | X | X | X |
DSDPKABN Packages Autobound DSDPKABN QTPKABND | X | X | X | X | X |
DSDPKALC Attempts To Allocate a Pkg DSDPKALC QTPKALLA | X | X | X | X | X |
DSDPKALL Packages Allocated DSDPKALL QTPKALL | X | X | X | X | X |
DSDPKGBD Packages Bound DSDPKGBD QTPKGBD | X | X | X | X | X |
DSDPKGFR Packages Freed DSDPKGFR QTPKGFRD | X | X | X | X | X |
DSDPL10 Total Times Pref. Qty 1/2 Normal BP0 DSDPL1X QBSTPL1 | X | X | X | X | X |
DSDPL11 Total Times Pref. Qty 1/2 Normal BP1 DSDPL1X QBSTPL1 | X | X | X | X | X |
DSDPL12 Total Times Pref. Qty 1/2 Normal BP2 DSDPL1X QBSTPL1 | X | X | X | X | X |
DSDPL13 Total Times Pref. Qty 1/2 Normal BP3 DSDPL1X QBSTPL1 | X | X | X | X | X |
DSDPL20 Total Times Pref. Qty 1/4 Normal BP0 DSDPL2X QBSTPL2 | X | X | X | X | X |
DSDPL21 Total Times Pref. Qty 1/4 Normal BP1 DSDPL2X QBSTPL2 | X | X | X | X | X |
DSDPL22 Total Times Pref. Qty 1/4 Normal BP2 DSDPL2X QBSTPL2 | X | X | X | X | X |
DSDPL23 Total Times Pref. Qty 1/4 Normal BP3 DSDPL2X QBSTPL2 | X | X | X | X | X |
DSDPPPE Negotiate Pageset/Partition Phys Lock DSDPPPE QTGSPPPE | X | X | X | X | X |
DSDPQF0 Total Times Parallel Buf. Not Alloc BP0 DSDPQFX QBSTPQF | X | X | X | X | X |
DSDPQF1 Total Times Parallel Buf. Not Alloc BP1 DSDPQFX QBSTPQF | X | X | X | X | X |
DSDPQF2 Total Times Parallel Buf. Not Alloc BP2 DSDPQFX QBSTPQF | X | X | X | X | X |
DSDPQF3 Total Times Parallel Buf. Not Alloc BP3 DSDPQFX QBSTPQF | X | X | X | X | X |
DSDPQO0 Total No. Parallel Queries BP0 DSDPQOX QBSTPQO | X | X | X | X | X |
DSDPQO1 Total No. Parallel Queries BP1 DSDPQOX QBSTPQO | X | X | X | X | X |
DSDPQO2 Total No. Parallel Queries BP2 DSDPQOX QBSTPQO | X | X | X | X | X |
DSDPQO3 Total No. Parallel Queries BP3 DSDPQOX QBSTPQO | X | X | X | X | X |
DSDPREP PREPARE Statements DSDPREP QXPREP | X | X | X | X | X |
DSDPREPI Prepare Statements Restricted DSDPREPI QXPRRESI | | | X | X | X |
DSDQUERY FETCH and SELECT Statements DSDQUERY QXSELECT | X | X | X | X | X |
DSDRBND Successful Rebind Plan DSDRBND QTPLNRBD | X | X | X | X | X |
DSDRBNDA Rebind Plan Attempts DSDRBNDA QTRBINDA | X | X | X | X | X |
DSDRBNDP REBIND PACKAGE Sub-Cmnds DSDRBNDP QTRBINDP | X | X | X | X | X |
DSDRBNPA Attempts To REBIND a Package DSDRBNPA QTRBNDPA | X | X | X | X | X |
DSDRCAUT Auth Chks for Routine Using Cache DSDRCAUT QTRACAUT | X | X | X | X | X |
DSDRCNAC Unable to Add Entry in Routine Cache DSDRCNAC QTRACNAC | X | X | X | X | X |
DSDRCNOT Rtn Auth Chks Not Using Rtn Cache DSDRCNOT QTRACNOT | X | X | X | X | X |
DSDRCOW1 DB2 Overwrote Authid in Rtn Cache DSDRCOW1 QTRACOW1 | X | X | X | X | X |
DSDRCOW2 DB2 Overwrote Rtn Entry in Rtn Cache DSDRCOW2 QTRACOW2 | X | X | X | X | X |
DSDRCPUB Auth Chks for Routine Held by Public DSDRCPUB QTRACPUB | X | X | X | X | X |
DSDRCUR INT BLKS Currently Allocated DSDRCUR QISTRCUR | X | X | X | X | X |
DSDRDGRP Total Number of Parallel Groups That DSDRDGRP QXREDGRP | X | X | X | X | X |
DSDRDLTD Deleted Rows DB2RDLTD QXRWSDELETD | | | X | X |
DSDREBND REBIND Subcommands DSDREBND QTREBIND | X | X | X | X | X |
DSDREEP0 Sequential Prefetch Disabled No Read DSDREEPX QBSTREE | X | X | X | X | X |
DSDREEP1 Sequential Prefetch Disabled No Read DSDREEPX QBSTREE | X | X | X | X | X |
DSDREEP2 Sequential Prefetch Disabled No Read DSDREEPX QBSTREE | X | X | X | X | X |
DSDREEP3 Sequential Prefetch Disabled No Read DSDREEPX QBSTREE | X | X | X | X | X |
DSDREL Number of Release Statements Executed DSDREL QXREL | X | X | X | X | X |
DSDREOP Times Reoptimization Occurs DSDREOP QXSTREOP | X | X | X | X | X |
DSDREOPN PB Found On Free Q During Open DSDREOPN QTREOPN | X | X | X | X | X |
DSDREVOK REVOKE Statements DSDREVOK QXREVOK | X | X | X | X | X |
DSDRFCHD Fetched Rows DB2RFCHD QXRWSFETCHD | | | X | X |
DSDRFXS0 Read Page-Fixed without Real Storage DSDRFXSX QBSTRPI | X | X | X | X | X |
DSDRFXS1 Read Page-Fixed without Real Storage DSDRFXSX QBSTRPI | X | X | X | X | X |
DSDRFXS2 Read Page-Fixed without Real Storage DSDRFXSX QBSTRPI | X | X | X | X | X |
DSDRFXS3 Read Page-Fixed without Real Storage DSDRFXSX QBSTRPI | X | X | X | X | X |
DSDRHIG Highest # Int BLKS Concur Alloc DSDRHIG QISTRHIG | X | X | X | X | X |
DSDRLLM RLP Stop: RID Limit Exceeded DSDRLLM QISTRLLM | X | X | X | X | X |
DSDRMAX RLP STOP: Concur. Proc Lim Exceeded DSDRMAX QISTRMAX | X | X | X | X | X |
DSDRMID DB2 Resource Manager Identifier DB2RMID QWHSRMID | X | X | X | X | X |
DSDRNIX Rename Index Statements DB2RNIX QXRNIX | | | | X | X |
DSDRNSTD Inserted Rows DB2RNSTD QXRWSINSRTD | | | X | X |

352 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSDRNTAB Number of RENAME TABLE Statements DSDRNTAB QXRNTAB | X | X | X | X | X |

DSDROIDX Direct Row Access Revert to Index DSDROIDX QXROIIDX | X | X | X | X | X |
DSDROITS Direct Row Access Revert to Table DSDROITS QXROITS | X | X | X | X | X |
DSDRPLM RLP Stop: DM Limit Exceeded DSDRPLM QISTRPLM | X | X | X | X | X |
DSDRPOP1 Parallel GPS Reformatted - Sysplex Conf DSDRPOP1 QXREPOP1 | X | X | X | X | X |
DSDRPOP2 Parallel GPS Reformatted - Buffer Resrc DSDRPOP2 QXREPOP2 | X | X | X | X | X |
DSDRSTG RLP STOP: Insufficient Storage DSDRSTG QISTRSTG | X | X | X | X | X |
DSDRUDTD Updated Rows DB2RUDTD QXRWSUPDTD | | | X | X |
DSDRWTRG Times Row Trigger Activated DSDRWTRG QXROWTRG | X | X | X | X | X |
DSDSABBP Total Active Buffers in Buffer Pool DSDSABBP QBSTCBA | X | X | X | X | X |
DSDSAC Total CF Writes Clean Pages DSDSAC QBGLAC | X | X | X | X | X |
DSDSAD Total CF Reads Prefetch Data Returned DSDSAD QBGLAD | X | X | | | |
DSDSAR Total CF Reads Pref No Data Not Sup. DSDSAR QBGLAR | X | X | | | |
DSDSAW Total CF Writes Changed Pages DSDSAW QBGLAW | X | X | X | X | X |
DSDSAX Total RPL Request Done by Prefetch DSDSAX QBGLAX | X | X | X | X | X |
DSDSAY Total GBP Reads Prefetch Changed Page DSDSAY QBGLAY | X | X | X | X | X |
DSDSAZ Total GBP Reads Prefetch Clean Page BP DSDSAZ QBGLAZ | X | X | | | X |
DSDSCC Total IXLCACHE Read-Castout-Class Req DSDSCC QBGLCC | X | X | X | X | X |
DSDSCIO Total Castout I/O Operations DSDSCIO QBSTCIO | | | | X | X |
DSDSCK Total GBP Checkpoints Triggered DSDSCK QBGLCK | X | X | X | X | X |
DSDSCM Total Read for Castout Multiple Reqs DSDSCM QBGLCM | | | X | X | X |
DSDSCN Total Castout Engine Not Available DSDSCN QBGLCN | X | X | | | |
DSDSCR Total Read for Castout Requests DSDSCR QBGLCR | | | X | X | X |
DSDSCS Total IXLCACHE Read-Castout-Stats Req DSDSCS QBGLCS | X | X | X | X | X |
DSDSCT Total Castout Class Threshold Detected DSDSCT QBGLCT | X | X | X | X | X |
DSDSDG Total Unregistered Page Requests DSDSDG QBGLDG | X | X | X | X | X |
DSDSDN Total IXLCACHE Delete-Name Requests DSDSDN QBGLDN | X | X | X | X | X |
DSDSELCT Number of SELECT Statements DSDSELCT QXSELECT | X | X | X | X | X |
DSDSETHV No. of SET HOST-VAR Stmts DSDSETHV QXSETHV | X | X | X | X | X |
DSDSEX Total Explicit XIs DSDSEX QBGLEX | X | X | X | X | X |
DSDSGG Total GETPAGEs for GBP-Dep Pagesets DSDSGG QBGLGG | | X | X | X | X |
DSDSGLO Suspends Due to XES Global Contention DSDSGLO QTGSSGLO | X | X | X | X | X |
DSDSGT Total Group BP Castout Threshold Det. DSDSGT QBGLGT | X | X | X | X | X |
DSDSHS Total Asynch IXLCACHE for Prim GBP DSDSHS QBGLHS | X | X | X | X | X |
DSDSIO0 Sync Read I/Os Seq Access Req BP0 DSDSIOX QBSTSIO | X | X | X | X | X |
DSDSIO1 Sync Read I/Os Seq Access Req BP1 DSDSIOX QBSTSIO | X | X | X | X | X |
DSDSIO2 Sync Read I/Os Seq Access Req BP2 DSDSIOX QBSTSIO | X | X | X | X | X |
DSDSIO3 Sync Read I/Os Seq Access Req BP3 DSDSIOX QBSTSIO | X | X | X | X | X |
DSDSKIP Parallel Coordination Bypass DB2 DSDSKIP QXXCSKIP | X | X | X | X | X |
DSDSLWDD DDs Used for Slow Close TS DSDSLWDD QTSLWDD | X | X | X | X | X |
DSDSMD Total CF Reads Data Returned DSDSMD QBGLMD | X | X | X | X | X |
DSDSMIAP Times RID List Retrieval Skipped DB2SMIAP QXRSMIAP | | | | | X |
DSDSMN Total CF Reads Data Not Ret. No Entry DSDSMN QBGLMN | | | | | |
DSDSMR Total CF Reads Data Not Returned Entry DSDSMR QBGLMR | X | X | X | X | X |
DSDSOS Total Other CF Requests DSDSOS QBGLOS | X | X | X | X | X |
DSDSPCO Total Pages Written for Castout I/Os DSDSPCO QBSTPCO | | | | X | X |
DSDSPDF0 Sequential Prefetch Disabled No Buffer DSDSPDFX QBSTSPD | X | X | X | X | X |
DSDSPDF1 Sequential Prefetch Disabled No Buffer DSDSPDFX QBSTSPD | X | X | X | X | X |
DSDSPDF2 Sequential Prefetch Disabled No Buffer DSDSPDFX QBSTSPD | X | X | X | X | X |
DSDSPDF3 Sequential Prefetch Disabled No Buffer DSDSPDFX QBSTSPD | X | X | X | X | X |
DSDSPPF0 Number of Pages Read Due to Prefetch DSDSPPFX QBSTSPP | X | X | X | X | X |
DSDSPPF1 Number of Pages Read Due to Prefetch DSDSPPFX QBSTSPP | X | X | X | X | X |
DSDSPPF2 Number of Pages Read Due to Prefetch DSDSPPFX QBSTSPP | X | X | X | X | X |
DSDSPPF3 Number of Pages Read Due to Prefetch DSDSPPFX QBSTSPP | X | X | X | X | X |
DSDSPWR0 System Pages Written to DASD DSDSPWRX QBSTPWS | X | X | X | X | X |
DSDSPWR1 System Pages Written to DASD DSDSPWRX QBSTPWS | X | X | X | X | X |
DSDSPWR2 System Pages Written to DASD DSDSPWRX QBSTPWS | X | X | X | X | X |
DSDSPWR3 System Pages Written to DASD DSDSPWRX QBSTPWS | X | X | X | X | X |
DSDSQCA Storage Allocated for Plans (>2GB) Bar DSDSQCA QISESQCA | | | | | X |
DSDSQCB Storage Allocated for Plans (<2GB) Bar DSDSQCB QISESQCB | | | | | X |
DSDSQKA Storage Allocated for Pkgs (>2GB) Bar DSDSQKA QISESQKA | | | | | X |
DSDSQKB Storage Allocated for Pkgs (<2GB) Bar DSDSQKB QISESQKB | | | | | X |
DSDSQLID No. Of Set Current SQLID DSDSQLID QXSETSQL | X | X | X | X | X |
DSDSQPF0 Number of Sequential Prefetch Requests DSDSQPFX QBSTSEQ | X | X | X | X | X |
DSDSRB Total GBP Rebuilds DSDSRB QBGLRB | X | X | X | X | X |
DSDSRC Total Pages Castout to DASD DSDSRC QBGLRC | X | X | X | X | X |
DSDSRD Total IXLCACHE Read-DIRINFO Requests DSDSRD QBGLRD | X | X | X | X | X |
DSDSRF Total CF Read Requests No Storage DSDSRF QBGLRF | X | X | | | |
DSDSRG Total Registered Page Requests DSDSRG QBGLRG | X | X | X | X | X |
DSDSSEF0 Storage Shortage Expansion Fails DSDSSEFX QBSTXFV | X | X | X | X | X |
DSDSSEF1 Storage Shortage Expansion Fails DSDSSEFX QBSTXFV | X | X | X | X | X |
DSDSSEF2 Storage Shortage Expansion Fails DSDSSEFX QBSTXFV | X | X | X | X | X |
DSDSSEF3 Storage Shortage Expansion Fails DSDSSEFX QBSTXFV | X | X | X | X | X |
DSDSSU Total CF Write Engine Not Available DSDSSU QBGLSU | X | X | | | |

Chapter 6: DATA SOURCES 353

6.3 Data Element/Data Source Cross-Reference

DSDSSW Total CF Writes For Changed Pages DSDSSW QBGLSW | X | X | X | X | X |

DSDSTAC Sync to Async Heuristic Convs LOCK Reqs DSDSTAC QTGSFLSE | | | X | X | X |
DSDSTCDG Number of Set Current Degree DSDSTCDG QXSETCDG | X | X | X | X | X |
DSDSTCON Number of Set Connection Statements DSDSTCON QXSETCON | X | X | X | X | X |
DSDSTCPR Set Current Precision Stmts Executed DSDSTCPR QXSETCPR | X | X | X | X | X |
DSDSTCRL Set Current Rules Stmts Executed DSDSTCRL QXSETCRL | X | X | X | X | X |
DSDSTPT Set Current Path Statements DSDSTPT QXSETPTH | X | X | X | X | X |
DSDSTTRG Times Statement Trigger Activated DSDSTTRG QXSTTRG | X | X | X | X | X |
DSDSUN Total IXLCACHE Unlock-Castout Req DSDSUN QBGLUN | X | X | X | X | X |
DSDSWC Total CF Writes For Clean Pages DSDSWC QBGLWC | X | X | X | X | X |
DSDSWF Total CF Write Requests No Storage DSDSWF QBGLWF | X | X | X | X | X |
DSDSWM Total Write and Register Multiple Reqs DSDSWM QBGLWM | | | X | X | X |
DSDSWP Total Pages Written via WARM DSDSWP QBGLWP | | | X | X | X |
DSDSWREE Total Times Write Engine Unavailable DSDSWREE QBSTWEE | X | X | X | | X |
DSDSWS Total Write and Register Requests DSDSWS QBGLWS | | | X | X | X |
DSDSXD Total CF Reads Buffer XI DSDSXD QBGLXD | X | X | X | X | X |
DSDSXR Total CF Reads Entry Created DSDSXR QBGLXR | X | X | X | X | X |
DSDS2D Total IXLCACHE Delete-Name-List 2nd GBP DSDS2D QBGL2D | X | X | X | X | X |
DSDS2F Total Write Chg Pgs to 2nd GBP Fail Stg DSDS2F QBGL2F | X | X | X | X | X |
DSDS2H Total Asynch IXLCACHE for 2nd GBP DSDS2H QBGL2H | X | X | X | X | X |
DSDS2N Total IXLCACHE Delete-Name 2nd GBP DSDS2N QBGL2N | X | X | X | X | X |
DSDS2R Total IXLCACHE Read-Castout-St 2nd GBP DSDS2R QBGL2R | X | X | X | X | X |
DSDS2S Total Comp Write 2nd GBP Suspended DSDS2S QBGL2S | X | X | X | X | X |
DSDS2W Total Write Chg Pgs to 2nd GBP Duplex DSDS2W QBGL2W | X | X | | | |
DSDTESTB Binds Without Plan ID DSDTESTB QTTESTB | X | X | X | X | X |
DSDTGERR Number of Create Aux Table Statements DSDTGERR QXTRGERR | X | X | X | X | X |
DSDTIMO Time-out Count DSDTIMO QTXATIM | X | X | X | X | X |
DSDTMIG0 No. Migrated Dataset Encountered BP X DSDTMIGX QBSTMIG | X | X | X | X | X |
DSDTMIG1 No. Migrated Dataset Encountered BP X DSDTMIGX QBSTMIG | X | X | X | X | X |
DSDTMIG2 No. Migrated Dataset Encountered BP X DSDTMIGX QBSTMIG | X | X | X | X | X |
DSDTMIG3 No. Migrated Dataset Encountered BP X DSDTMIGX QBSTMIG | X | X | X | X | X |
DSDTOGRP Total Number of Parallel Groups DSDTOGRP QXTOTGRP | X | X | X | X | X |
DSDTPF00 WK PF Abort - 0 PF QTY DSDTPF0X QBSTWKPD | X | X | X | X | X |
DSDTPF01 WK PF Abort - 0 PF QTY DSDTPF0X QBSTWKPD | X | X | X | X | X |
DSDTPF02 WK PF Abort - 0 PF QTY DSDTPF0X QBSTWKPD | X | X | X | X | X |
DSDTPF03 WK PF Abort - 0 PF QTY DSDTPF0X QBSTWKPD | X | X | X | X | X |
DSDTPIO0 No. Prefetch Async Read I/Os DSDTPIOX QBSTPIO | X | X | X | X | X |
DSDTPIO1 No. Prefetch Async Read I/Os DSDTPIOX QBSTPIO | X | X | X | X | X |
DSDTPIO2 No. Prefetch Async Read I/Os DSDTPIOX QBSTPIO | X | X | X | X | X |
DSDTPIO3 No. Prefetch Async Read I/Os DSDTPIOX QBSTPIO | X | X | X | X | X |
DSDTRTBL Truncate Table Statements DB2TRTBL QXTRTBL | | | | X | X |
DSDTRTO0 No. Recall Time Outs DB2TRTOX QBSTRTO | X | X | X | X | X |
DSDTRTO1 No. Recall Time Outs DB2TRTOX QBSTRTO | X | X | X | X | X |
DSDTRTO2 No. Recall Time Outs DB2TRTOX QBSTRTO | X | X | X | X | X |
DSDTRTO3 No. Recall Time Outs DB2TRTOX QBSTRTO | X | X | X | X | X |
DSDUPDTE UPDATE Statements DSDUPDTE QXUPDTE | X | X | X | X | X |
DSDUPLK Unlock Requests for Physical Locks DSDUPLK QTGSUPLK | X | X | X | X | X |
DSDUSLM Unlock Requests Propagated to XES DSDUSLM QTGSUSLM | X | X | X | X | X |
DSDUSUC Checks Actually Authorized DSDUSUC QTAUSUC | X | X | X | X | X |
DSDVPA0 Successful VPOOL Expand/Contract BP0 DSDVPAX QBSTVPA | X | X | X | X | X |
DSDVPA1 Successful VPOOL Expand/Contract BP1 DSDVPAX QBSTVPA | X | X | X | X | X |
DSDVPA2 Successful VPOOL Expand/Contract BP2 DSDVPAX QBSTVPA | X | X | X | X | X |
DSDVPA3 Successful VPOOL Expand/Contract BP3 DSDVPAX QBSTVPA | X | X | X | X | X |
DSDVPL0 No. Buffers Allocated for a VPOOL BP0 DSDVPLX QBSTVPL | X | X | X | X | X |
DSDVPL1 No. Buffers Allocated for a VPOOL BP1 DSDVPLX QBSTVPL | X | X | X | X | X |
DSDVPL2 No. Buffers Allocated for a VPOOL BP2 DSDVPLX QBSTVPL | X | X | X | X | X |
DSDVPL3 No. Buffers Allocated for a VPOOL BP3 DSDVPLX QBSTVPL | X | X | X | X | X |
DSDWBVQ0 Pages Deq VDWQ Destr Read Rq DSDWBVQX QBSTWBVQ | X | X | X | X | X |
DSDWBVQ1 Pages Deq VDWQ Destr Read Rq DSDWBVQX QBSTWBVQ | X | X | X | X | X |
DSDWBVQ2 Pages Deq VDWQ Destr Read Rq DSDWBVQX QBSTWBVQ | X | X | X | X | X |
DSDWBVQ3 Pages Deq VDWQ Destr Read Rq DSDWBVQX QBSTWBVQ | X | X | X | X | X |
DSDWDRP0 Pages Destruct Read Req DSDWDRPX QBSTWDRP | X | X | X | X | X |
DSDWDRP1 Pages Destruct Read Req DSDWDRPX QBSTWDRP | X | X | X | X | X |
DSDWDRP2 Pages Destruct Read Req DSDWDRPX QBSTWDRP | X | X | X | X | X |
DSDWDRP3 Pages Destruct Read Req DSDWDRPX QBSTWDRP | X | X | X | X | X |
DSDWFD0 Work Files Denied Sort Merge DSDWFDX QBSTWFD | X | X | X | X | X |
DSDWFD1 Work Files Denied Sort Merge DSDWFDX QBSTWFD | X | X | X | X | X |
DSDWFD2 Work Files Denied Sort Merge DSDWFDX QBSTWFD | X | X | X | X | X |
DSDWFD3 Work Files Denied Sort Merge DSDWFDX QBSTWFD | X | X | X | X | X |
DSDWFF0 Poor Sort Merge - Buf Short DSDWFFX QBSTWFF | X | X | X | X | X |
DSDWFF1 Poor Sort Merge - Buf Short DSDWFFX QBSTWFF | X | X | X | X | X |
DSDWFF2 Poor Sort Merge - Buf Short DSDWFFX QBSTWFF | X | X | X | X | X |
DSDWFF3 Poor Sort Merge - Buf Short DSDWFFX QBSTWFF | X | X | X | X | X |
DSDWFM0 Max WK File Alloc Sort Merge DSDWFMX QBSTWFM | X | X | X | X | X |

354 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSDWFM1 Max WK File Alloc Sort Merge DSDWFMX QBSTWFM | X | X | X | X | X |

DSDWFM2 Max WK File Alloc Sort Merge DSDWFMX QBSTWFM | X | X | X | X | X |
DSDWFM3 Max WK File Alloc Sort Merge DSDWFMX QBSTWFM | X | X | X | X | X |
DSDWFR0 Req Query WK File Sort Merge DSDWFRX QBSTWFR | X | X | X | X | X |
DSDWFR1 Req Query WK File Sort Merge DSDWFRX QBSTWFR | X | X | X | X | X |
DSDWFR2 Req Query WK File Sort Merge DSDWFRX QBSTWFR | X | X | X | X | X |
DSDWFR3 Req Query WK File Sort Merge DSDWFRX QBSTWFR | X | X | X | X | X |
DSDWFT0 Work Files Req Sort Merge DSDWFTX QBSTWFT | X | X | X | X | X |
DSDWFT1 Work Files Req Sort Merge DSDWFTX QBSTWFT | X | X | X | X | X |
DSDWFT2 Work Files Req Sort Merge DSDWFTX QBSTWFT | X | X | X | X | X |
DSDWFT3 Work Files Req Sort Merge DSDWFTX QBSTWFT | X | X | X | X | X |
DSDWFXS0 Write Page Fixed W/O Real Storage DSDWFXSX QBSTWPI | X | X | X | X | X |
DSDWFXS1 Write Page Fixed W/O Real Storage DSDWFXSX QBSTWPI | X | X | X | X | X |
DSDWFXS2 Write Page Fixed W/O Real Storage DSDWFXSX QBSTWPI | X | X | X | X | X |
DSDWFXS3 Write Page Fixed W/O Real Storage DSDWFXSX QBSTWPI | X | X | X | X | X |
DSDWREE0 No. Times Write Engine Unavailable x DSDWREEX QBSTWEE | X | X | X | | |
DSDWREE1 No. Times Write Engine Unavailable x DSDWREEX QBSTWEE | X | X | X | | |
DSDWREE2 No. Times Write Engine Unavailable x DSDWREEX QBSTWEE | X | X | X | | |
DSDWREE3 No. Times Write Engine Unavailable x DSDWREEX QBSTWEE | X | X | X | | |
DSDWRMM0 Write I/Os By Media Manager DSDWRMMX QBSTWIO | X | X | X | X | X |
DSDWRMM1 Write I/Os By Media Manager DSDWRMMX QBSTWIO | X | X | X | X | X |
DSDWRMM2 Write I/Os By Media Manager DSDWRMMX QBSTWIO | X | X | X | X | X |
DSDWRMM3 Write I/Os By Media Manager DSDWRMMX QBSTWIO | X | X | X | X | X |
DSDXFL0 Buffer Not Located -- VPOOL Full BP0 DSDXFLX QBSTXFL | X | X | X | X | X |
DSDXFL1 Buffer Not Located -- VPOOL Full BP1 DSDXFLX QBSTXFL | X | X | X | X | X |
DSDXFL2 Buffer Not Located -- VPOOL Full BP2 DSDXFLX QBSTXFL | X | X | X | X | X |
DSDXFL3 Buffer Not Located -- VPOOL Full BP3 DSDXFLX QBSTXFL | X | X | X | X | X |
DSDXIS0 Max No. Concurrent Pref. Streams BP0 DSDXISX QBSTXIS | X | X | X | X | X |
DSDXIS1 Max No. Concurrent Pref. Streams BP1 DSDXISX QBSTXIS | X | X | X | X | X |
DSDXIS2 Max No. Concurrent Pref. Streams BP2 DSDXISX QBSTXIS | X | X | X | X | X |
DSDXIS3 Max No. Concurrent Pref. Streams BP3 DSDXISX QBSTXIS | X | X | X | X | X |
DSDZRLMT No. Zero Resource Limit DSDZRLMT QTXAFLG1 | X | X | | | X |
----------------------------------------------------------------------------------------------------------------------------------

Chapter 6: DATA SOURCES 355

6.3 Data Element/Data Source Cross-Reference

The DB2DSP (DB2 Plan Activity) File

356 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ACE DB2 Agent Control Element DB2ACE QWHSACE | X | X | X | X | X |
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2AUTH Authorization Identifier DB2AUTH QWHCAID | X | X | X | X | X |
DB2CONN Connection Identifier DB2CONN QWHCCN | X | X | X | X | X |
DB2CORR Correlation Identifier DB2CORR QWHCCV | X | X | X | X | X |
DB2CPU DB2 CPU Time DB2CPU QWHUCPU | X | X | X | X | X |
DB2DDFCT DDF COMMIT Count DB2DDFCT QWHSLUCC | X | X | X | X | X |
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2DSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2LOCN DDF Local Location ID DB2LOCN QWHSLOCN | X | X | X | X | X |
DB2LUNAM DB2 Logical Unit Name DB2LUNAM QWHSLUNM | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2NETID Network Identifier DB2NETID QWACNID | X | X | X | X | X |
DB2OPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DB2PLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DB2REQID DDF Requester Location ID DB2REQID QWHDRQNM | X | X | X | X | X |
DB2STCK DB2 Store Clock At End Event DB2STCK QWHSSTCK | X | X | X | X | X |
DB2UNIQ DDF Instance Number Identifier DB2UNIQ QWHSLUUV | X | X | X | X | X |
DSPABORT Abort Requests DSPABORT QWACABRT | X | X | X | X | X |
DSPACHG Change Request Count DSPACHG QTXACHG | X | X | X | X | X |
DSPACHUS Highest CPU 16 Microseconds Used DSPACHUS QTXACHUS | X | X | X | X | X |
DSPACLMT Limit In CPU 16 Microseconds DSPACLMT QTXACLMT | X | X | X | X | X |
DSPAFLG Flag Byte DSPAFLG QTXAFLG1 | X | X | X | X | X |
DSPAIETM Class 5 Accum Elapsed Time IFI Calls DSPAIETM QIFAAIET | X | X | X | X | X |
DSPAIRLM Other IRLM Request Count DSPAIRLM QTXAIRLM | X | X | X | X | X |
DSPAITTM Class 5 Accum TCB Time IFI Calls DSPAITTM QIFAAITT | X | X | X | X | X |
DSPALDAB No. ALTER DATABASE Statements DSPALDAB QXALDAB | X | X | X | X | X |
DSPALGTM Class 3 Accum Wait Archive Log Time DSPALGTM QWACALOG | | | | | |
DSPALGTM Class 3 Accum Wait Archive Log Time DSPALGTM QWAXALOG | X | X | X | X | X |
DSPALLTM DB2 Lock & Latch Time DSPALLTM QWACAWTL | X | X | X | X | X |
DSPALOCK Lock Request Count DSPALOCK QTXALOCK | X | X | X | X | X |
DSPALTIX ALTER INDEX Statements DSPALTIX QXALTIX | X | X | X | X | X |
DSPALTJR Alter JAR Statements DB2ALTJR QXAALTJR | | | | X | X |
DSPALTST ALTER STORAGE GROUP Statements DSPALTST QXALTST | X | X | X | X | X |
DSPALTTA ALTER TABLE Statements DSPALTTA QXALTTA | X | X | X | X | X |
DSPALTTS ALTER TABLESPACE Statements DSPALTTS QXALTTS | X | X | X | X | X |
DSPALTTX Alter Trusted Context Statements DB2ALTTX QXALTCTX | | | | X | X |
DSPALTVW Alter View Statements DB2ALTVW QXALTVW | | | | X | X |
DSPAMBTM Class 5 Accum Elapsed Time Data Capture DSPAMBTM QIFAAIET | X | X | X | X | X |
DSPAMLTM Class 5 Accum Elapsed Time Log Records DSPAMLTM QIFAAIET | X | X | X | X | X |
DSPANDD No. Data Descriptions Returned DSPANDD QIFAANDD | X | X | X | X | X |
DSPANIF No. Entry/Exit Events Class 5 DSPANIF QIFAANIF | X | X | X | X | X |
DSPANLR No. Data Capture Log Reads DSPANLR QIFAANLR | X | X | X | X | X |
DSPANMB No. Data Capture Describes Performed DSPANMB QIFAANMB | X | X | X | X | X |
DSPANRC No. Log Records Captured DSPANRC QIFAANRC | X | X | X | X | X |
DSPANRR No. Log Records Returned to Caller DSPANRR QIFAANRR | X | X | X | X | X |
DSPANTB No. Data Capture Tables DSPANTB QIFAANTB | X | X | X | X | X |
DSPAPREC How Limit Was Determined DSPAPREC QTXAPREC | X | X | X | X | X |
DSPAQRY Query Request Count DSPAQRY QTXAQRY | X | X | X | X | X |
DSPARLH Wait Trace Events Latch Contention DB2ARLH QWACARLH | | | | | X |
DSPARLCT No. Archive Log Suspensions DSPARLCT QWAXALCT | X | X | X | X | X |
DSPARLID Resource Limit Table ID DSPARLID QTXARLID | X | X | X | X | X |
DSPASLAT Suspend Count - Latch Conflict DSPASLAT QTXASLAT | X | X | X | X | X |
DSPASLMT Limit In SU's - ASUTIME DSPASLMT QTXASLMT | X | X | X | X | X |
DSPASOTH Suspend Count - Other Conflict DSPASOTH QTXASOTH | X | X | X | X | X |
DSPAUNLK Unlock Request Count DSPAUNLK QTXAUNLK | X | X | X | X | X |
DSPAWATM Class 3 Accum Wait Log Reads Time DSPAWATM QWACAWAR | | | | | |
DSPAWATM Class 3 Accum Wait Log Reads Time DSPAWATM QWAXAWAR | X | X | X | X | X |
DSPAWBTM Wait Time - TCP/IP LOB Material DB2AWBTM QWACALBW | | | | X | X |
DSPAWCTM Class 3 Accum Wait Drain Wait Time DSPAWCTM QWACAWCL | | | | | |
DSPAWCTM Class 3 Accum Wait Drain Wait Time DSPAWCTM QWAXAWCL | X | X | X | X | X |
DSPAWDTM Class 3 Accum Wait Drain Lock Time DSPAWDTM QWACAWDR | | | | | |
DSPAWDTM Class 3 Accum Wait Drain Lock Time DSPAWDTM QWAXAWDR | X | X | X | X | X |
DSPAWETM Class 3 Accum Wait Service Task Time DSPAWETM QWACAWTE | X | X | X | X | X |
DSPAWGTM Accum Wait Time Data Sharing Messages DSPAWGTM QWACAWTG | X | X | X | X | X |
DSPAWJTM Accum Wait Time Global Locks DSPAWJTM QWACAWTJ | X | X | X | X | X |
DSPAWLTM Accum Wait Time - Latch Contention DB2AWLTM QWACAWLH | | | | | X |

Chapter 6: DATA SOURCES 357

6.3 Data Element/Data Source Cross-Reference

DSPAWPTM Class 3 Accum Wait Latch Contention DSPAWPTM QWACAWTP | X | X | X | X | X |

DSPAWRTM Class 3 Accum Wait Read Other Time DSPAWRTM QWACAWTR | X | X | X | X | X |
DSPAWWTM Class 3 Accum Wait Write Other Time DSPAWWTM QWACAWTW | X | X | X | X | X |
DSPBEGSC Beginning Store Clock DSPBEGSC QWACBSC | X | X | X | X | X |
DSPBGTCB Beginning TCB Timer DSPBGTCB QWACBJST | X | X | X | X | X |
DSPBPNX Parallel Groups Run Cross Data Share DB2BPNX QXXCBPNX | X | X | X | X | X |
DSPCANM No. Times SQL Call Wait for TCB DSPCANM QWACCANM | X | X | X | X | X |
DSPCATYP Connecting System Type Code DSPCATYP QMDACTYP | X | X | X | X | X |
DSPCIMW0 No. of Immed. Sync Write I/O Buffer BP0 DB2CIMWX QBACIMW | X | X | X | X | X |
DSPCIMW1 No. of Immed. Sync Write I/O Buffer BP1 DB2CIMWX QBACIMW | X | X | X | X | X |
DSPCIMW2 No. of Immed. Sync Write I/O Buffer BP2 DB2CIMWX QBACIMW | X | X | X | X | X |
DSPCIMW3 No. of Immed. Sync Write I/O Buffer BP3 DB2CIMWX QBACIMW | X | X | X | X | X |
DSPCLOSE CLOSE Statements DSPCLOSE QXCLOSE | X | X | X | X | X |
DSPCLRAB No. Log Record Bytes Written DSPCLRAB QWACLRAB | X | X | X | X | X |
DSPCLRN No. Log Records Written DSPCLRN QWACLRN | X | X | X | X | X |
DSPCLS2 No. Accounting Class 2 Data DSPCLS2 QWACFLGS | X | X | X | X | X |
DSPCLS2C No. Accounting Class 2 Data Collected DSPCLS2C QWACFLGS | X | X | X | X | X |
DSPCLS3 No. Accounting Class 3 Data DSPCLS3 QWACFLGS | X | X | X | X | X |
DSPCLS3C No. Accounting Class 3 Data Collected DSPCLS3C QWACFLGS | X | X | X | X | X |
DSPCLS7C No. Accounting Class 7 Data Collected DSPCLS7C QWACFLGS | X | X | X | X | X |
DSPCLS8C No. Accounting Class 8 Data Collected DSPCLS8C QWACFLGS | X | X | X | X | X |
DSPCMTON COMMENT ON Statements DSPCMTON QXCMTON | X | X | X | X | X |
DSPCOMM2 Commit Phase Two Invocations DSPCOMM2 QWACCOMM | X | X | X | X | X |
DSPCPLK Change Requests for Physical Locks DSPCPLK QTGACPLK | X | X | X | X | X |
DSPCPUZ1 Accum CPU Tm Used on z/OS Spec Eng DSPCPUZ1 QWACCLS1_zIIP | | | X | X | X |
DSPCPUZ2 CPU Tm Used in DB2 on z/OS Spec Eng DSPCPUZ2 QWACCLS2_zIIP | | | X | X | X |
DSPCRAL Create Alias DSPCRAL QXCRALS | X | X | X | X | X |
DSPCRCTX Create Trusted Context Statements DB2CRCTX QXCRCTX | | | | X | X |
DSPCRDAB CREATE DATABASE Statements DSPCRDAB QXCRDAB | X | X | X | X | X |
DSPCRINX CREATE INDEX Statements DSPCRINX QXCRINX | X | X | X | X | X |
DSPCRROL Create Role Statements DB2CRROL QXCRROL | | | | X | X |
DSPCRSTG CREATE STORAGE GROUP Statements DSPCRSTG QXCRSTG | X | X | X | X | X |
DSPCRSYN CREATE SYNONYM Statements DSPCRSYN QXCRSYN | X | X | X | X | X |
DSPCRTAB CREATE TABLE Statements DSPCRTAB QXCRTAB | X | X | X | X | X |
DSPCSLM Change Requests Propagated to XES DSPCSLM QTGACSLM | X | X | X | X | X |
DSPCTABS CREATE TABLESPACE Statements DSPCTABS QXCTABS | X | X | X | X | X |
DSPCUDNE No. SQL Entry/exit UDF Events DB2CUDNE QWACUDNE | X | X | X | X | X |
DSPCWLD Times Duplicate Concentrate Dyna Stmnts DB2CWLD QXSTCWLD | | | | | X |
DSPCWLM Times Matched Concentrate Dyna Stmnts DB2CWLM QXSTCWLM | | | | | X |
DSPCWLP Times Parsed Concentrate Dyna Stmnts DB2CWLP QXSTCWLP | | | | | X |
DSPCWLR Times Replaced Concentrate Dyna Stmnts DB2CWLR QXSTCWLR | | | | | X |
DSPDEAD Deadlock Count DSPDEAD QTXADEA | X | X | X | X | X |
DSPDEFVU CREATE VIEW Statements DSPDEFVU QXDEFVU | X | X | X | X | X |
DSPDELET DELETE Statements DSPDELET QXDELET | X | X | X | X | X |
DSPDESC DESCRIBE Statements DSPDESC QXDESC | X | X | X | X | X |
DSPDGBUF Total Number of Parallel Groups That DB2DGBUF QXDEGBUF | X | X | X | X | X |
DSPDGCUR Parallel Groups to Seq Cursor Update DB2DGCUR QXDEGCUR | X | X | X | X | X |
DSPDGESA Parallel Groups to Seq No ESA Sort DB2DGESA QXDEGESA | X | X | X | X | X |
DSPDPF0 No. Times Dynamic Prefetch Req BP0 DB2DPFX QBACDPF | X | X | X | X | X |
DSPDPF1 No. Times Dynamic Prefetch Req BP1 DB2DPFX QBACDPF | X | X | X | X | X |
DSPDPF2 No. Times Dynamic Prefetch Req BP2 DB2DPFX QBACDPF | X | X | X | X | X |
DSPDPF3 No. Times Dynamic Prefetch Req BP3 DB2DPFX QBACDPF | X | X | X | X | X |
DSPDRAL Drop Alias DSPDRAL QXDRPAL | X | X | X | X | X |
DSPDRPDB DROP DATABASE Statements DSPDRPDB QXDRPDB | X | X | X | X | X |
DSPDRPIX DROP INDEX Statements DSPDRPIX QXDRPIX | X | X | X | X | X |
DSPDRPKG No. DROP PACKAGE Statements DSPDRPKG QXDRPPKG | X | X | X | X | X |
DSPDRPRO Drop Role Statements DB2DRPRO QXDRPROL | | | | X | X |
DSPDRPST DROP STORAGE GROUP Statements DSPDRPST QXDRPST | X | X | X | X | X |
DSPDRPSY DROP SYNONYM Statements DSPDRPSY QXDRPSY | X | X | X | X | X |
DSPDRPTA DROP TABLE Statements DSPDRPTA QXDRPTA | X | X | X | X | X |
DSPDRPTS DROP TABLESPACE Statements DSPDRPTS QXDRPTS | X | X | X | X | X |
DSPDRPTX Drop Trusted Context Statements DB2DRPTX QXDRPCTX | | | | X | X |
DSPDRPVU DROP VIEW Statements DSPDRPVU QXDRPVU | X | X | X | X | X |
DSPDRTA Global Requests Denied DSPDRTA QTGADRTA | X | X | X | X | X |
DSPDSCRT No. DESCRIBE TABLE Statements DSPDSCRT QXDSCRTB | X | X | X | X | X |
DSPDSNS No. Wait Trace Events - Dataspace Mgr DB2DSNS QWAXDSNS | X | X | X | X | X |
DSPDSSTM Accum Wait Time Dataspace Manager DB2DSSTM QWAXDSSE | X | X | X | X | X |
DSPDSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DSPEGENC Parallel Groups Executed Sequential DB2EGENC QXDEGENC | X | X | X | X | X |
DSPELGZP Accumulated CPU Time zIIP-Eligible Work DSPELGZP QWACZIIP_ELIGIBLE | | | X | X | |
DSPENDSC Ending Store Clock DSPENDSC QWACESC | X | X | X | X | X |
DSPENTCB Ending TCB Timer DSPENTCB QWACEJST | X | X | X | X | X |
DSPENTEX Number of Entry/Exit Events Processed DSPENTEX QWACARNA | X | X | X | X | X |
DSPET2TM Elapsed Time in DB2 DSPET2TM QWACASC | X | X | X | X | X |

358 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSPFCCT No. Wait Trace Events - Force-At-Commit DB2FCCT QWAXFCCT | X | X | X | X | X |

DSPFETCH Number of FETCH Statements DSPFETCH QXFETCH | X | X | X | X | X |
DSPFLGS Accounting Class Flags DSPFLGS QWACFLGS | X | X | X | X | X |
DSPFLSE No. of False Contentions DSPFLSE QTGAFLSE | X | X | X | X | X |
DSPFRIDS Times RID List Overflowed RID Storage DB2FRIDS QXWFRIDS | | | | | X |
DSPFRIDT Times RID List Overflowed RID Exceeded DB2FRIDT QXWFRIDT | | | | | X |
DSPGPGR0 GETPAGE Requests BP0 DB2GPGRX QBACGET | X | X | X | X | X |
DSPGPGR1 GETPAGE Requests BP1 DB2GPGRX QBACGET | X | X | X | X | X |
DSPGPGR2 GETPAGE Requests BP2 DB2GPGRX QBACGET | X | X | X | X | X |
DSPGPGR3 GETPAGE Requests BP3 DB2GPGRX QBACGET | X | X | X | X | X |
DSPGRANT GRANT Statements DSPGRANT QXGRANT | X | X | X | X | X |
DSPHPG0 No. Pages HPOOL to VPOOL Prefetch BP0 DB2HPGX QBACHPG | X | X | | | |
DSPHPG1 No. Pages HPOOL to VPOOL Prefetch BP1 DB2HPGX QBACHPG | X | X | | | |
DSPHPG2 No. Pages HPOOL to VPOOL Prefetch BP2 DB2HPGX QBACHPG | X | X | | | |
DSPHPG3 No. Pages HPOOL to VPOOL Prefetch BP3 DB2HPGX QBACHPG | X | X | | | |
DSPHRE0 No. Sync Req Page HPOOL to VPOOL BP0 DB2HREX QBACHRE | X | X | | | |
DSPHRE1 No. Sync Req Page HPOOL to VPOOL BP1 DB2HREX QBACHRE | X | X | | | |
DSPHRE2 No. Sync Req Page HPOOL to VPOOL BP2 DB2HREX QBACHRE | X | X | | | |
DSPHRE3 No. Sync Req Page HPOOL to VPOOL BP3 DB2HREX QBACHRE | X | X | | | |
DSPHRF0 No. Unsuccessful Read Req Exp Stg BP0 DB2HRFX QBACHRF | X | X | | | |
DSPHRF1 No. Unsuccessful Read Req Exp Stg BP1 DB2HRFX QBACHRF | X | X | | | |
DSPHRF2 No. Unsuccessful Read Req Exp Stg BP2 DB2HRFX QBACHRF | X | X | | | |
DSPHRF3 No. Unsuccessful Read Req Exp Stg BP3 DB2HRFX QBACHRF | X | X | | | |
DSPHWF0 No. Unsuccessful Write Req Exp Stg BP0 DB2HWFX QBACHWF | X | X | | | |
DSPHWF1 No. Unsuccessful Write Req Exp Stg BP1 DB2HWFX QBACHWF | X | X | | | |
DSPHWF2 No. Unsuccessful Write Req Exp Stg BP2 DB2HWFX QBACHWF | X | X | | | |
DSPHWF3 No. Unsuccessful Write Req Exp Stg BP3 DB2HWFX QBACHWF | X | X | | | |
DSPHWR0 No. Sync Req Move VPOOL to HPOOL BP0 DB2HWRX QBACHWR | X | X | | | |
DSPHWR1 No. Sync Req Move VPOOL to HPOOL BP1 DB2HWRX QBACHWR | X | X | | | |
DSPHWR2 No. Sync Req Move VPOOL to HPOOL BP2 DB2HWRX QBACHWR | X | X | | | |
DSPHWR3 No. Sync Req Move VPOOL to HPOOL BP3 DB2HWRX QBACHWR | X | X | | | |
DSPIGLO Suspends Due to IRLM Global Contention DSPIGLO QTGAIGLO | X | X | X | X | X |
DSPINCRB Incremental Binds DSPINCRB QXINCRB | X | X | X | X | X |
DSPNFLMT No. Infinite Resource Limit DSPNFLMT QTXAFLG1 | X | X | | | |
DSPINSRT INSERT Statements DSPINSRT QXINSRT | X | X | X | X | X |
DSPIOETM Accumulated I/O Elapsed Wait Time in DB2 DSPIOETM QWACAWTI | X | X | X | X | X |
DSPISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DSPJINCS Times RID List Append RID Storage DB2JINCS QXHJINCS | | | | | X |
DSPIXLE No. Wait Trace Events - Async IXLCACHE DB2IXLE QWAXIXLE | X | X | X | X | X |
DSPIXLTM Total Wait Time IXLCACHE/FCOMP Asynch DB2IXLTM QWAXIXLT | X | X | X | X | X |
DSPJINCT Times RID List Append RID Exceeded DB2JINCT QXHJINCT | | | | | X |
DSPLABEL Number of LABEL ON Statements DSPLABEL QXLABON | X | X | X | X | X |
DSPLEEM Number of Lock Escalations to Exclusive DSPLEEM QTXALEX | X | X | X | X | X |
DSPLESM Number of Lock Escalations to Shared DSPLESM QTXALES | X | X | X | X | X |
DSPLOCK LOCK TABLE Statements DSPLOCK QXLOCK | X | X | X | X | X |
DSPLPF0 No. List Prefetch Requested BP0 DB2LPFX QBACLPF | X | X | X | X | X |
DSPLPF1 No. List Prefetch Requested BP1 DB2LPFX QBACLPF | X | X | X | X | X |
DSPLPF2 No. List Prefetch Requested BP2 DB2LPFX QBACLPF | X | X | X | X | X |
DSPLPF3 No. List Prefetch Requested BP3 DB2LPFX QBACLPF | X | X | X | X | X |
DSPLPLK Lock Requests for Physical Locks DSPLPLK QTGALPLK | X | X | X | X | X |
DSPLSLM Lock Requests Propagated to XES DSPLSLM QTGALSLM | X | X | X | X | X |
DSPMALCT Max Archive Log Suspensions DSPMALCT QWAXALCT | X | X | X | X | X |
DSPMCHG Max Change Lock Requests DSPMCHG QTXACHG | X | X | X | X | X |
DSPMDEAD Max Deadlocks DSPMDEAD QTXADEA | X | X | X | X | X |
DSPMENTX Max Entry/Exits DSPMENTX QWACARNA | X | X | X | X | X |
DSPMERGE Merge Statements DB2MERGE QXMERGE | | | | X | X |
DSPMGPG0 Max BP0 GETPAGE Requests DB2MGPGX QBACGET | X | X | X | X | X |
DSPMGPG1 Max BP1 GETPAGE Requests DB2MGPGX QBACGET | X | X | X | X | X |
DSPMGPG2 Max BP2 GETPAGE Requests DB2MGPGX QBACGET | X | X | X | X | X |
DSPMGPG3 Max BP3 GETPAGE Requests DB2MGPGX QBACGET | X | X | X | X | X |
DSPMIOTM Max I/O Elapsed Wait Time in DB2 DSPMIOTM QWACAWTI | X | X | X | X | X |
DSPMIRLM Max IRLM Lock Requests DSPMIRLM QTXAIRLM | X | X | X | X | X |
DSPMIXNL Mult Indx Not Used - RID Limit DSPMIXNL QXMRMIAP | X | X | X | X | X |
DSPMIXNU Mult Indx Not Used - No Storage DSPMIXNU QXNSMIAP | X | X | X | X | X |
DSPMIXU Multiple Index Path Used DSPMIXU QXMIAP | X | X | X | X | X |
DSPMLEEM Max Escalate to Exclusive Lock DSPMLEEM QTXALEX | X | X | X | X | X |
DSPMLESM Max Escalate to Shared Lock DSPMLESM QTXALES | X | X | X | X | X |
DSPMLGTM Max Class 3 Accum Wait Archive Log Time DSPMLGTM QWACALOG | | | | | X |
DSPMLOCK Max Lock Requests DSPMLOCK QTXALOCK | X | X | X | X | X |
DSPMLPF0 Total List Prefetch Requested DSPMLPFX QBACLPF | X | X | X | X | X |
DSPMLPF1 Total List Prefetch Requested DSPMLPFX QBACLPF | X | X | X | X | X |
DSPMLPF2 Total List Prefetch Requested DSPMLPFX QBACLPF | X | X | X | X | X |
DSPMLPF3 Total List Prefetch Requested DSPMLPFX QBACLPF | X | X | X | X | X |
DSPMMXPL Max Max. No. Page Locks Held DSPMMXPL QTXANPL | X | X | X | X | X |

Chapter 6: DATA SOURCES 359

6.3 Data Element/Data Source Cross-Reference

DSPMPFR0 Max Buffer Pool Prefetch Reads DB2MPFRX QBACSEQ | X | X | X | X | X |

DSPMPFR1 Max Buffer Pool Prefetch Reads DB2MPFRX QBACSEQ | X | X | X | X | X |
DSPMPFR2 Max Buffer Pool Prefetch Reads DB2MPFRX QBACSEQ | X | X | X | X | X |
DSPMPFR3 Max Buffer Pool Prefetch Reads DB2MPFRX QBACSEQ | X | X | X | X | X |
DSPMQRY Max Query Requests DSPMQRY QTXAQRY | X | X | X | X | X |
DSPMSLAT Max Latch Suspensions DSPMSLAT QTXASLAT | X | X | X | X | X |
DSPMSOTH Max Other Suspends DSPMSOTH QTXASOTH | X | X | X | X | X |
DSPMSPU0 Max BP0 System Pages Updated DB2MSPUX QBACSWS | X | X | X | X | X |
DSPMSPU1 Max BP1 System Pages Updated DB2MSPUX QBACSWS | X | X | X | X | X |
DSPMSPU2 Max BP2 System Pages Updated DB2MSPUX QBACSWS | X | X | X | X | X |
DSPMSRD0 Max Buffer Pool Synchronous Reads DB2MSRDX QBACRIO | X | X | X | X | X |
DSPMSRD1 Max Buffer Pool Synchronous Reads DB2MSRDX QBACRIO | X | X | X | X | X |
DSPMSRD2 Max Buffer Pool Synchronous Reads DB2MSRDX QBACRIO | X | X | X | X | X |
DSPMSRD3 Max Buffer Pool Synchronous Reads DB2MSRDX QBACRIO | X | X | X | X | X |
DSPMSWR0 Max Buffer Pool Synchronous Reads DB2MSWRX QBACIMW | X | X | X | X | X |
DSPMSWR1 Max Buffer Pool Synchronous Reads DB2MSWRX QBACIMW | X | X | X | X | X |
DSPMSWR2 Max Buffer Pool Synchronous Reads DB2MSWRX QBACIMW | X | X | X | X | X |
DSPMSWR3 Max Buffer Pool Synchronous Reads DB2MSWRX QBACIMW | X | X | X | X | X |
DSPMTIMO Max Timeouts DSPMTIMO QTXATIM | X | X | X | X | X |
DSPMWATR Max Wait Trace Events / Plan DSPMWATR QWACARNE | X | X | X | X | X |
DSPMWETM Max Class 3 Accum Wait Serv. Task Time DSPMWETM QWACAWTE | X | X | X | X | X |
DSPMWRTM Max Class 3 Accum Wait Read Other Time DSPMWRTM QWACAWTR | X | X | X | X | X |
DSPMWTRL Max Wait Trace Events for Lock/Latch DSPMWTRL QWACARNL | X | X | X | X | X |
DSPMWTRR Max Wait Trace Events for Read Other DSPMWTRR QWACARNR | X | X | X | X | X |
DSPMWTRW Max Wait Trace Events for Write Other DSPMWTRW QWACARNW | X | X | X | X | X |
DSPMWTSE Max Wait Trace Events for Sync. Exec. DSPMWTSE QWACARNS | X | X | X | X | X |
DSPMWWTM Max Class 3 Accum Wait Write Other Time DSPMWWTM QWACAWTW | X | X | X | X | X |
DSPMXDEG Max Degree of Parallelism DB2MXDEG QXMAXDEG | X | X | X | X | X |
DSPMXPL Maximum Number of Page Locks Held DSPMXPL QTXANPL | X | X | X | X | X |
DSPMXSE1 Max CPU Tm Exec SP on z/OS SE DSPMXSE1 QWACSP_CLS1se | | | | X | X |
DSPMXSE2 Max CPU Tm in DB2 Exec SP on z/OS SE DSPMXSE2 QWACSP_CLS2se | | | | X | X |
DSPMXSET Max CPU Tm Exec Trgrs on z/OS Spec Eng DSPMXSET QWACTRTE_se | | | | X | X |
DSPMXZP1 Max CPU Tm Used on z/OS Spec Eng DSPMXZP1 QWACCLS1_zIIP | | | X | X | X |
DSPMXZP2 Max CPU Tm Used in DB2 on z/OS Spec Eng DSPMXZP2 QWACCLS2_zIIP | | | X | X | X |
DSPMXZTT Max CPU Tm Exec Trgrs on z/OS Spec Eng DSPMXZTT QWACTRTT_zIIP | | | X | X | X |
DSPNATHD Count of ACCUMACC Roll-up Threads DSPNATHD QWACPCNT | X | X | X | X | X |
DSPNETID Network Identifier DSPNETID QWACNID | X | X | X | X | X |
DSPNGT0 No. Time GETPAGE Req Not Satisfied BP0 DB2NGTX QBACNGT | X | X | X | X | X |
DSPNGT1 No. Time GETPAGE Req Not Satisfied BP1 DB2NGTX QBACNGT | X | X | X | X | X |
DSPNGT2 No. Time GETPAGE Req Not Satisfied BP2 DB2NGTX QBACNGT | X | X | X | X | X |
DSPNGT3 No. Time GETPAGE Req Not Satisfied BP3 DB2NGTX QBACNGT | X | X | X | X | X |
DSPNOGRP Total Number of Parallel Groups That DB2NOGRP QXNORGRP | X | X | X | X | X |
DSPNTFY Notify Messages Sent DSPNTFY QTGANTFY | X | X | X | X | X |
DSPOCNS No. Wait Trace Events - Open/Close/HSM DB2OCNS QWAXOCNS | X | X | X | X | X |
DSPOCSTM Accum Wait Time Open/Close/HSM DB2OCSTM QWAXOCSE | X | X | X | X | X |
DSPOPEN OPEN Statements DSPOPEN QXOPEN | X | X | X | X | X |
DSPOPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DSPORNO Parallel Groups Executed Coordination DB2ORNO QXCOORNO | X | X | X | X | X |
DSPORR Parallel Groups Executed Repeat-read DB2ORR QXISORR | X | X | X | X | X |
DSPOTNS No. Wait Trace Events - Other Services DB2OTNS QWAXOTNS | X | X | X | X | X |
DSPOTSTM Accum Wait Time Other DB2 Services DB2OTSTM QWAXOTSE | X | X | X | X | X |
DSPPACE Parallel Task Token DSPPACE QWACPACE | X | X | X | X | X |
DSPPARR No. Rollup Data DSPPARR QWACFLGS | X | X | | | |
DSPPCNT No. Parallel Tasks Created DSPPCNT QWACPCNT | X | X | X | X | X |
DSPPCWDP Duplicate Per Parsed Dyna Stmnts DB2PCWDP | | | | | X |
DSPPCWMP Matched Per Parsed Dyna Stmnts DB2PCWMP | | | | | X |
DSPPCWRP Replaced Per Parsed Dyna Stmnts DB2PCWRP | | | | | X |
DSPPEDTM Accum CPU Proc SQL Prior Enclave DB2PEDTM QWACPECD | X | X | X | | |
DSPPETTM Accum TCB Prior Enclave Create DB2PETTM QWACPECT | X | X | X | | |
DSPPGDTT Parallel GPS Using UDF - Ex. Single DB2 DB2PGDTT QXDEGDTT | X | X | X | X | X |
DSPPKGN No. Packages or DBRMs DSPPKGN QWACPKGN | X | X | X | X | X |
DSPPLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DSPPRFH0 PREFETCH Read Requests Buffer BP0 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSPPRFH1 PREFETCH Read Requests Buffer BP1 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSPPRFH2 PREFETCH Read Requests Buffer BP2 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSPPRFH3 PREFETCH Read Requests Buffer BP3 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSPREASN Reason for Accounting Record DSPREASN QWACRINV | X | X | X | X | X |
DSPRBSV No. SQL Rollback to Savepoint Stmts DB2RBSV QWACRBSV | X | X | X | X | X |
DSPRDGRP Total Number of Parallel Groups That DB2RDGRP QXREDGRP | X | X | X | X | X |
DSPRDLTD Deleted Rows DB2RDLTD QXRWSDELETD | | | X | X |
DSPREVOK REVOKE Statements DSPREVOK QXREVOK | X | X | X | X |
DSPRFCHD Fetched Rows DB2RFCHD QXRWSFETCHD | | | X | X |
DSPRLSV No. SQL Release Savepoint Statements DB2RLSV QWACRLSV | X | X | X | X |
DSPRMID DB2 Resource Manager Identifier DB2RMID QWHSRMID | X | X | X | X |

360 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSPRNIX Rename Index Statements DB2RNIX QXRNIX | | | | X | X |

DSPRNKCL No. Wait Trace Glbl Cont. Child LLock DB2RNKCL QWACARNK | | | X | X | X |
DSPRNMOL No. Wait Trace Glbl Cont. Other LLock DB2RNMOL QWACARNM | | | X | X | X |
DSPRNNPL No. Wait Trace Glbl Cont. PP PLock DB2RNNPL QWACARNN | | | X | X | X |
DSPRNOPL No. Wait Trace Glbl Cont. PG PLock DB2RNOPL QWACARNO | | | X | X | X |
DSPRNQOL No. Wait Trace Glbl Cont. Other PLock DB2RNQOL QWACARNQ | | | X | X | X |
DSPRNSTD Inserted Rows DB2RNSTD QXRWSINSRTD | | | X | X |
DSPRPOP1 Parallel GPS Reformatted - Sysplex Conf DB2RPOP1 QXREPOP1 | X | X | X | X |
DSPRPOP2 Parallel GPS Reformatted - Buffer Resrc DB2RPOP2 QXREPOP2 | X | X | X | X |
DSPRUDTD Updated Rows DB2RUDTD QXRWSUPDTD | | | X | X |
DSPSDG Total Unregister Pages Requests DB2SDG QBGADG | X | X | X | X | X |
DSPSELCT Number of SELECT Statements DSPSELCT QXSELECT | X | X | X | X | X |
DSPSETHV No. SET HOST-VAR Statements DSPSETHV QXSETHV | X | X | X | X | X |
DSPSEX Total Explicit XIs DB2SEX QBGAEX | X | X | X | X | X |
DSPSGG Total GETPAGEs for GBP-Dep Pagesets DB2SGG QBGAGG | | X | X | X | X |
DSPSGLO Suspends Due to XES Global Contention DSPSGLO QTGASGLO | X | X | X | X | X |
DSPSHS Total Asynch IXLCACHE for Prim GBP DB2SHS QBGAHS | X | X | X | X | X |
DSPSIO0 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSPSIO1 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSPSIO2 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSPSIO3 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSPSKIP Parallel Coordination Bypass DB2 DB2SKIP QXXCSKIP | X | X | X | X | X |
DSPSLNS No. Wait Trace Events - SYSLGRNG DB2SLNS QWAXSLNS | X | X | X | X | X |
DSPSLSTM Accum Wait Time SYSLGRNG DB2SLSTM QWAXSLSE | X | X | X | X | X |
DSPSMD Total CF Reads Data Returned DSPSMD QBGAMD | X | X | X | X | X |
DSPSMIAP Times RID List Retrieval Skipped DB2SMIAP QXRSMIAP | | | | | X |
DSPSMN Total CF Reads Data Not Ret. No Entry DSPSMN QBGAMN | X | X | X | X | X |
DSPSMR Total CF Reads Data Not Returned Entry DSPSMR QBGAMR | X | X | X | X | X |
DSPSPATM Total Elapsed Time Stored Procedures DB2SPATM QWACSPEA | X | X | X | X | X |
DSPSPBTM Total Elapsed Time in DB2 Stored Proc. DB2SPBTM QWACSPEB | X | X | X | X | X |
DSPSPCTM Accum CPU Time SQL Procedures Main Unit DB2SPCTM QWACSPNF_CP | | | | X | X |
DSPSPETM Total Elapsed Time Wait for TCB DSPSPETM QWACCAST | X | X | X | X | X |
DSPSPNE SQL Events by Stored Procs DSPSPNE QWACSPNE | X | X | X | X | X |
DSPSPPTM CPU Time Stored Proc Address Space DSPSPPTM QWACSPCP | X | X | X | X | X |
DSPSPRU0 System Page Record Update BP0 DB2SPRUX QBACSWS | X | X | X | X | X |
DSPSPRU1 System Page Record Update BP1 DB2SPRUX QBACSWS | X | X | X | X | X |
DSPSPRU2 System Page Record Update BP2 DB2SPRUX QBACSWS | X | X | X | X | X |
DSPSPRU3 System Page Record Update BP3 DB2SPRUX QBACSWS | X | X | X | X | X |
DSPSPSE1 Accum CPU Tm Exec SP on z/OS Spec Eng DSPSPSE1 QWACSP_CLS1se | | | | X | X |
DSPSPSE2 CPU Tm in DB2 Exec SP on z/OS Spec Eng DSPSPSE2 QWACSP_CLS2se | | | | X | X |
DSPSPZET Total Elapsed Time on zIIP Stored Proc. DB2SPZET QWACSPNF_ELAP | | | | X | X |
DSPSPZTM CPU Tm Exec Strd Proc on z/OS Spec Eng DB2SPZTM QWACSPNF_CP | | | | X | X |
DSPSP1 P-Lock Lock Requests-Space Map Pages1 DB2SP1 QBGAP1 | | X | X | X | X |
DSPSP2 P-Lock Lock Requests-Data Pages2 DB2SP2 QBGAP2 | | X | X | X | X |
DSPSP2TM Accum CPU Time in DB2 Stored Proc. DSPSP2TM QWACSPTT | X | X | X | X | X |
DSPSP3 P-Lock Lock Requests-Index Leaf Pages3 DB2SP3 QBGAP3 | | X | X | X | X |
DSPSQLID No. Of Set Current SQLID DSPSQLID QXSETSQL | X | X | X | X | X |
DSPSRIO0 Synchronous Read IOs BP0 DB2SRIOX QBACRIO | X | X | X | X | X |
DSPSRIO1 Synchronous Read IOs BP1 DB2SRIOX QBACRIO | X | X | X | X | X |
DSPSRIO2 Synchronous Read IOs BP2 DB2SRIOX QBACRIO | X | X | X | X | X |
DSPSRIO3 Synchronous Read IOs BP3 DB2SRIOX QBACRIO | X | X | X | X | X |
DSPSSW Total CF Writes For Changed Pages DSPSSW QBGASW | X | X | X | X | X |
DSPSS1 P-Lock Lock Susp. - Space Map Pages 1 DB2SS1 QBGAS1 | | X | X | X | X |
DSPSS2 P-Lock Lock Suspensions - Data Pages 2 DB2SS2 QBGAS2 | | X | X | X | X |
DSPSS3 P-Lock Lock Susp. - Index Leaf Pages 3 DB2SS3 QBGAS3 | | X | X | X | X |
DSPSUCV SU:CPU-second Conversion Factor DB2SUCV QWACSUCV | X | X | X | X | X |
DSPSU1 P-Lock Unlock Requests1 DB2SU1 QBGAU1 | | X | X | X | X |
DSPSVPT No. SQL Savepoint Statements DB2SVPT QWACSVPT | X | X | X | X | X |
DSPSWC Total CF Writes For Clean Pages DSPSWC QBGAWC | X | X | X | X | X |
DSPSWM Total Write and Register Multiple Reqs DB2SWM QBGAWM | | | X | X | X |
DSPSWS Total Write and Register Requests DB2SWS QBGAWS | | | X | X | X |
DSPSXD Total CF Reads Buffer XI DSPSXD QBGAXD | X | X | X | X | X |
DSPSXN Total CF Reads Entry Not Created DSPSXN QBGAXN | | | | | X |
DSPSXR Total CF Reads Entry Created DSPSXR QBGAXR | X | X | X | X | X |
DSPS2H Total Asynch IXLCACHE for 2nd GBP DB2S2H QBGA2H | X | X | X | X | X |
DSPS2S Total Comp Chks 4 Wrts 2nd GBP Suspend DB2S2S QBGA2S | X | X | X | X | X |
DSPS2W Total Wrts of Chg Pgs 2nd GBP Duplex DB2S2W QBGA2W | X | X | | | X |
DSPTC2TM Class 2 Accumulated TCB Time in DB2 DSPTC2TM QWACAJST | X | X | X | X | X |
DSPTEETM Total Elps Tm Exec Trigger Undr Enclave DB2TEETM QWACTREE | X | X | X | X | X |
DSPTIMO Timeout Count DSPTIMO QTXATIM | X | X | X | X | X |
DSPTOGRP Total Number of Parallel Groups DB2TOGRP QXTOTGRP | X | X | X | X | X |
DSPTRETM Elapsed Time Executing Control Triggers DB2TRETM QWACTRET | X | X | X | X | X |
DSPTRTBL Truncate Table Statements DB2TRTBL QXTRTBL | | | | X | X |
DSPTRTSE Accum CPU Tm Exe Trgrs on z/OS Spec Eng DSPTRTSE QWACTRTE_se | | | | X | X |

Chapter 6: DATA SOURCES 361

6.3 Data Element/Data Source Cross-Reference

DSPTRTTM Accum TCB Time Under Cntl Trigger DB2TRTTM QWACTRTT | X | X | X | X | X |

DSPTRTZP CPU Tm Exec Triggers on z/OS Spec Eng DSPTRTZP QWACTRTT_zIIP | | | X | X | X |
DSPTTETM Total TCB Tm Exec Trigger Undr Enclave DB2TTETM QWACTRTE | X | X | X | X | X |
DSPUDATM Total Elapsed Time UDF DB2UDATM QWACUDEA | X | X | X | X | X |
DSPUDBTM Total Elapsed Time in DB2 UDF DB2UDBTM QWACUDEB | X | X | X | X | X |
DSPUDCTM Accum CPU Time UDF DB2UDCTM QWACUDCP | X | X | X | X | X |
DSPUDSTM Total Elapsed Time UDF Wait for TCB DB2UDSTM QWACUDST | X | X | X | X | X |
DSPUDSE1 Accum CPU Tm Exec UDF on z/OS Spec Eng DB2UDSE1 QWACUDF_CLS1se | | | | X | X |
DSPUDSE2 CPU Tm in DB2 Exec UDF on z/OS Spec Eng DB2UDSE2 QWACUDF_CLS2se | | | | X | X |
DSPUDTTM Accum CPU Time in DB2 UDF DB2UDTTM QWACUDTT | X | X | X | X | X |
DSPUPDTE UPDATE Statements DSPUPDTE QXUPDTE | X | X | X | X | X |
DSPUPLK Unlock Requests for Physical Locks DSPUPLK QTGAUPLK | X | X | X | X | X |
DSPUSLM Unlock Requests Propagated to XES DSPUSLM QTGAUSLM | X | X | X | X | X |
DSPWATRA No. Wait Trace Events for Log Reads DSPWATRA QWACANAR | | | | | X |
DSPWATRA No. Wait Trace Events for Log Reads DSPWATRA QWAXANAR | X | X | X | X | X |
DSPWATRB Wt Trace for TCP/IP LOB Material DB2WATRB QWACALBC | | | | X | X |
DSPWATRC Wait Trace for Claims DSPWATRC QWACARNC | | | | | X |
DSPWATRC Wait Trace for Claims DSPWATRC QWAXARNC | X | X | X | X | X |
DSPWATRD Wait Trace for Drain Lock DSPWATRD QWACARND | | | | | |
DSPWATRD Wait Trace for Drain Lock DSPWATRD QWAXARND | X | X | X | X | X |
DSPWATRG No. Wait Trace for Global Lock DSPWATRG QWACARNJ | X | X | X | X | X |
DSPWATRL No. Wait Trace Events for Lock/Latch DSPWATRL QWACARNL | X | X | X | X | X |
DSPWATRM No. Wait Trace Events for Data Shr Msgs DSPWATRM QWACARNG | X | X | X | X | X |
DSPWATRP Wait Trace for Latch Contention DSPWATRP QWACARNH | X | X | X | X | X |
DSPWATRR No. Wait Trace Events for Read Other DSPWATRR QWACARNR | X | X | X | X | X |
DSPWATRW No. Wait Trace Events for Write Other DSPWATRW QWACARNW | X | X | X | X | X |
DSPWATSE No. Wait Trace Events for Sync. Exec. DSPWATSE QWACARNS | X | X | X | X | X |
DSPWATTR Number of Wait Trace Events Processed DSPWATTR QWACARNE | X | X | X | X | X |
DSPWFCTM Total Wait Time for Force-At-Commit DB2WFCTM QWAXAWFC | X | X | X | X | X |
DSPWLCTM Glbl Contention Child L-Lock Wait Time DB2WLCTM QWACAWTK | | | X | X | X |
DSPWGLTM Glbl Contention PG P-Lock Wait Time DB2WGLTM QWACAWTO | | | X | X | X |
DSPWLLTM Glbl Contention Other L-Locks Wait Time DB2WLLTM QWACAWTM | | | X | X | X |
DSPWLPTM Glbl Contention PP P-Lock Wait Time DB2WLPTM QWACAWTN | | | X | X | X |
DSPWTOTM Glbl Contention Other P-Locks Wait Time DB2WTOTM QWACAWTQ | | | X | X | X |
DSPWLGTM Accum Wait Time for Log Write IO DB2WLGTM QWACAWLG | X | X | X | X | X |
DSPWLMCL WLM Service Class Name DB2WLMCL QWACWLME | X | X | X | X | X |
DSPXCQO Mem Name of Parallelism Coordinator DB2XCQO QWDAXCQO | X | X | X | X | X |
DSPZRLMT No. Zero Resource Limit DSPZRLMT QTXAFLG1 | X | X | | | X |
----------------------------------------------------------------------------------------------------------------------------------

362 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

The DB2DSU (DB2 User Activity) File

Chapter 6: DATA SOURCES 363

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ACE DB2 Agent Control Element DB2ACE QWHSACE | X | X | X | X | X |
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2AUTH Authorization Identifier DB2AUTH QWHCAID | X | X | X | X | X |
DB2CONN Connection Identifier DB2CONN QWHCCN | X | X | X | X | X |
DB2CORR Correlation Identifier DB2CORR QWHCCV | X | X | X | X | X |
DB2CPU DB2 CPU Time DB2CPU QWHUCPU | X | X | X | X | X |
DB2CRDNT CICS/RRSAF/DB Access Network Name DB2CRDNT QWHCTOKN | X | X | | | |
DB2CRDLU CICS/RRSAF/DB Access LU Name DB2CRDLU QWHCTOKN | X | X | | | |
DB2CRDUV CICS/RRSAF/DB Access Uniqueness Value DB2CRDUV QWHCTOKN | X | X | | | |
DB2DDFCT DDF COMMIT Count DB2DDFCT QWHSLUCC | X | X | X | X | X |
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2DSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DB2ISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DB2LOCN DDF Local Location ID DB2LOCN QWHSLOCN | X | X | X | X | X |
DB2LUNAM DB2 Logical Unit Name DB2LUNAM QWHSLUNM | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DB2NETID Network Identifier DB2NETID QWACNID | X | X | X | X | X |
DB2OPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DB2PLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DB2RELN DB2 Release Identifier DB2RELN QWHSRELN | X | X | X | X | X |
DB2STCK DB2 Store Clock At End Event DB2STCK QWHSSTCK | X | X | X | X | X |
DSUABORT ABORT Requests DSUABORT QWACABRT | X | X | X | X | X |
DSUACHG Change Request Count DSUACHG QTXACHG | X | X | X | X | X |
DSUACHUS Highest CPU 16 Microseconds Used DSUACHUS QTXACHUS | X | X | X | X | X |
DSUACLMT Limit In CPU 16 Microseconds DSUACLMT QTXACLMT | X | X | X | X | X |
DSUAFLG Flag Byte DSUAFLG QTXAFLG1 | X | X | X | X | X |
DSUAIETM Class 5 Accum Elapsed Time IFI Calls DSUAIETM QIFAAIET | X | X | X | X | X |
DSUAIRLM Other IRLM Request Count DSUAIRLM QTXAIRLM | X | X | X | X | X |
DSUAITTM Class 5 Accum TCB Time IFI Calls DSUAITTM QIFAAITT | X | X | X | X | X |
DSUALDAB No. ALTER DATABASE Statements DSUALDAB QXALDAB | X | X | X | X | X |
DSUALGTM Class 3 Accum Wait Archive Log Time DSUALGTM QWACALOG | | | | | |
DSUALGTM Class 3 Accum Wait Archive Log Time DSUALGTM QWAXALOG | X | X | X | X | X |
DSUALLTM DB2 Lock & Latch Time DSUALLTM QWACAWTL | X | X | X | X | X |
DSUALOCK Lock Request Count DSUALOCK QTXALOCK | X | X | X | X | X |
DSUALTIX ALTER INDEX Statements DSUALTIX QXALTIX | X | X | X | X | X |
DSUALTJR Alter JAR Statements DB2ALTJR QXAALTJR | | | | X | X |
DSUALTST ALTER STORAGE GROUP Statements DSUALTST QXALTST | X | X | X | X | X |
DSUALTTA ALTER TABLE Statements DSUALTTA QXALTTA | X | X | X | X | X |
DSUALTTS ALTER TABLESPACE Statements DSUALTTS QXALTTS | X | X | X | X | X |
DSUALTTX Alter Trusted Context Statements DB2ALTTX QXALTCTX | | | | X | X |
DSUALTVW Alter View Statements DB2ALTVW QXALTVW | | | | X | X |
DSUAMBTM Class 5 Accum Elapsed Time Data Capture DSUAMBTM QIFAAIET | X | X | X | X | X |
DSUAMLTM Class 5 Accum Elapsed Time Log Records DSUAMLTM QIFAAIET | X | X | X | X | X |
DSUANDD No. Data Descriptions Returned DSUANDD QIFAANDD | X | X | X | X | X |
DSUANDR No. Data Rows Returned DSUANDR QIFAANDR | X | X | X | X | X |
DSUANIF No. Entry/Exit Events Class 5 DSUANIF QIFAANIF | X | X | X | X | X |
DSUANMB No. Data Capture Describes Performed DSUANMB QIFAANMB | X | X | X | X | X |
DSUANRC No. Log Records Captured DSUANRC QIFAANRC | X | X | X | X | X |
DSUANRR No. Log Records Returned to Caller DSUANRR QIFAANRR | X | X | X | X | X |
DSUANTB No. Data Capture Tables DSUANTB QIFAANTB | X | X | X | X | X |
DSUAPPL Client Application Name DSUAPPL QMDAAPPL | X | X | X | X | X |
DSUAPREC How Limit Was Determined DSUAPREC QTXAPREC | X | X | X | X | X |
DSUAQRY Query Request Count DSUAQRY QTXAQRY | X | X | X | X | X |
DSUARLH Wait Trace Events Latch Contention DB2ARLH QWACARLH | | | | | X |
DSUARLCT No. Archive Log Suspensions DSUARLCT QWAXALCT | X | X | X | X | X |
DSUARLID Resource Limit Table ID DSUARLID QTXARLID | X | X | X | X | X |
DSUASLAT Suspend Count - Latch Conflict DSUASLAT QTXASLAT | X | X | X | X | X |
DSUASLMT Limit In SU's - ASUTIME DSUASLMT QTXASLMT | X | X | X | X | X |
DSUASOTH Suspend Count - Other Conflict DSUASOTH QTXASOTH | X | X | X | X | X |
DSUATID Client Authid DSUATID QMDAATID | X | X | X | X | X |
DSUAUNLK Unlock Request Count DSUAUNLK QTXAUNLK | X | X | X | X | X |
DSUAWATM Class 3 Accum Wait Log Reads Time DSUAWATM QWACAWAR | | | | | |
DSUAWATM Class 3 Accum Wait Log Reads Time DSUAWATM QWAXAWAR | X | X | X | X | X |
DSUAWBTM Wait Time - TCP/IP LOB Material DB2AWBTM QWACALBW | | | | X | X |
DSUAWCTM Class 3 Accum Wait Drain Wait Time DSUAWCTM QWACAWCL | | | | | |
DSUAWCTM Class 3 Accum Wait Drain Wait Time DSUAWCTM QWAXAWCL | X | X | X | X | X |
DSUAWDTM Class 3 Accum Wait Drain Lock Time DSUAWDTM QWACAWDR | | | | | |
DSUAWDTM Class 3 Accum Wait Drain Lock Time DSUAWDTM QWAXAWDR | X | X | X | X | X |
DSUAWETM Class 3 Accum Wait Service Task Time DSUAWETM QWACAWTE | X | X | X | X | X |

364 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSUAWGTM Accum Wait Time Data Sharing Messages DSUAWGTM QWACAWTG | X | X | X | X | X |

DSUAWJTM Accum Wait Time Global Locks DSUAWJTM QWACAWTJ | X | X | X | X | X |
DSUAWPTM Class 3 Accum Wait Latch Contention DSUAWPTM QWACAWTP | X | X | X | X | X |
DSUAWRTM Class 3 Accum Wait Read Other Time DSUAWRTM QWACAWTR | X | X | X | X | X |
DSUAWWTM Class 3 Accum Wait Write Other Time DSUAWWTM QWACAWTW | X | X | X | X | X |
DSUBEGSC Beginning Store Clock DSUBEGSC QWACBSC | X | X | X | X | X |
DSUBGTCB Beginning TCB Timer DSUBGTCB QWACBJST | X | X | X | X | X |
DSUBPNX Parallel Groups Run Cross Data Share DB2BPNX QXXCBPNX | X | X | X | X | X |
DSUCANM No. Times SQL Call Wait for TCB DSUCANM QWACCANM | X | X | X | X | X |
DSUCATYP Connecting System Type Code DSUCATYP QWHCATYP | X | X | X | X | X |
DSUCICLU CICS Terminal LU Name DSUCICLU QWHCTOKN | X | X | X | X | X |
DSUCICNT CICS Network Identifier DSUCICNT QWHCTOKN | X | X | X | X | X |
DSUCICUW CICS Logical Unit of Work ID DSUCICUW QWHCTOKN | X | X | X | X | X |
DSUCIMW0 No. of Immed. Sync Write I/O Buffer BP0 DB2CIMWX QBACIMW | X | X | X | X | X |
DSUCIMW1 No. of Immed. Sync Write I/O Buffer BP1 DB2CIMWX QBACIMW | X | X | X | X | X |
DSUCIMW2 No. of Immed. Sync Write I/O Buffer BP2 DB2CIMWX QBACIMW | X | X | X | X | X |
DSUCIMW3 No. of Immed. Sync Write I/O Buffer BP3 DB2CIMWX QBACIMW | X | X | X | X | X |
DSUCLOSE CLOSE Statements DSUCLOSE QXCLOSE | X | X | X | X | X |
DSUCLRAB No. Log Record Bytes Written DSUCLRAB QWACLRAB | X | X | X | X | X |
DSUCLRN No. Log Records Written DSUCLRN QWACLRN | X | X | X | X | X |
DSUCLS2 No. Accounting Class 2 Data DSUCLS2 QWACFLGS | X | X | | | |
DSUCLS2C No. Accounting Class 2 Data Collected DSUCLS2C QWACFLGS | X | | | | |
DSUCLS3 No. Accounting Class 3 Data DSUCLS3 QWACFLGS | X | X | | | |
DSUCLS3C No. Accounting Class 3 Data Collected DSUCLS3C QWACFLGS | X | X | | | |
DSUCLS7C No. Accounting Class 7 Data Collected DSUCLS7C QWACFLGS | X | X | | | |
DSUCLS8C No. Accounting Class 8 Data Collected DSUCLS8C QWACFLGS | X | X | | | |
DSUCOMM2 Commit Phase Two Invocations DSUCOMM2 QWACCOMM | X | X | X | X | X |
DSUCPLK Change Requests for Physical Locks DSUCPLK QTGACPLK | X | X | X | X | X |
DSUCPUZ1 Accum CPU Tm Used on z/OS Spec Eng DSUCPUZ1 QWACCLS1_ZIIP | | | X | X | X |
DSUCPUZ2 CPU Tm Used in DB2 on z/OS Spec Eng DSUCPUZ2 QWACCLS2_ZIIP | | | X | X | X |
DSUCRAL Create Alias DSUCRAL QXCRALS | X | X | X | X | X |
DSUCRCTX Create Trusted Context Statements DB2CRCTX QXCRCTX | | | | X | X |
DSUCRDAB CREATE DATABASE Statements DSUCRDAB QXCRDAB | X | X | X | X | X |
DSUCRINX CREATE INDEX Statements DSUCRINX QXCRINX | X | X | X | X | X |
DSUCRROL Create Role Statements DB2CRROL QXCRROL | | | | X | X |
DSUCRSTG CREATE STORAGE GROUP Statements DSUCRSTG QXCRSTG | X | X | X | X | X |
DSUCRSYN CREATE SYNONYM Statements DSUCRSYN QXCRSYN | X | X | X | X | X |
DSUCRTAB CREATE TABLE Statements DSUCRTAB QXCRTAB | X | X | X | X | X |
DSUCSLM Change Requests Propagated to XES DSUCSLM QTGACSLM | X | X | X | X | X |
DSUCTABS CREATE TABLESPACE Statements DSUCTABS QXCTABS | X | X | X | X | X |
DSUCUDNE No. SQL Entry/exit UDF Events DB2CUDNE QWACUDNE | X | X | X | X | X |
DSUCWLD Times Duplicate Concentrate Dyna Stmnts DB2CWLD QXSTCWLD | | | | | X |
DSUCWLM Times Matched Concentrate Dyna Stmnts DB2CWLM QXSTCWLM | | | | | X |
DSUCWLP Times Parsed Concentrate Dyna Stmnts DB2CWLP QXSTCWLP | | | | | X |
DSUCWLR Times Replaced Concentrate Dyna Stmnts DB2CWLR QXSTCWLR | | | | | X |
DSUDEAD Deadlock Count DSUDEAD QTXADEA | X | X | X | X | X |
DSUDEFVU CREATE VIEW Statements DSUDEFVU QXDEFVU | X | X | X | X | X |
DSUDELET DELETE Statements DSUDELET QXDELET | X | X | X | X | X |
DSUDESC DESCRIBE Statements DSUDESC QXDESC | X | X | X | X | X |
DSUDGBUF Total Number of Parallel Groups That DB2DGBUF QXDEGBUF | X | X | X | X | X |
DSUDGCUR Parallel Groups to Seq Cursor Update DB2DGCUR QXDEGCUR | X | X | X | X | X |
DSUDGESA Parallel Groups to Seq No ESA Sort DB2DGESA QXDEGESA | X | X | X | X | X |
DSUDPF0 No. Times Dynamic Prefetch Req BP0 DB2DPFX QBACDPF | X | X | X | X | X |
DSUDPF1 No. Times Dynamic Prefetch Req BP1 DB2DPFX QBACDPF | X | X | X | X | X |
DSUDPF2 No. Times Dynamic Prefetch Req BP2 DB2DPFX QBACDPF | X | X | X | X | X |
DSUDPF3 No. Times Dynamic Prefetch Req BP3 DB2DPFX QBACDPF | X | X | X | X | X |
DSUDRAL Drop Alias DSUDRAL QXDRPAL | X | X | X | X | X |
DSUDRPDB DROP DATABASE Statements DSUDRPDB QXDRPDB | X | X | X | X | X |
DSUDRPIX DROP INDEX Statements DSUDRPIX QXDRPIX | X | X | X | X | X |
DSUDRPKG No. DROP PACKAGE Statements DSUDRPKG QXDRPPKG | X | X | X | X | X |
DSUDRPRO Drop Role Statements DB2DRPRO QXDRPROL | | | | X | X |
DSUDRPST DROP STORAGE GROUP Statements DSUDRPST QXDRPST | X | X | X | X | X |
DSUDRPSY DROP SYNONYM Statements DSUDRPSY QXDRPSY | X | X | X | X | X |
DSUDRPTA DROP TABLE Statements DSUDRPTA QXDRPTA | X | X | X | X | X |
DSUDRPTS DROP TABLESPACE Statements DSUDRPTS QXDRPTS | X | X | X | X | X |
DSUDRPTX Drop Trusted Context Statements DB2DRPTX QXDRPCTX | | | | X | X |
DSUDRPVU DROP VIEW Statements DSUDRPVU QXDRPVU | X | X | X | X | X |
DSUDRTA Global Requests Denied DSUDRTA QTGADRTA | X | X | X | X | X |
DSUDSCRT No. DESCRIBE TABLE Statements DSUDSCRT QXDSCRTB | X | X | X | X | X |
DSUDSNS No. Wait Trace Events - Dataspace Mgr DB2DSNS QWAXDSNS | | X | X | X | X |
DSUDSSTM Accum Wait Time Dataspace Manager DB2DSSTM QWAXDSSE | | X | X | X | X |
DSUDSTSN Destination Sequence Number DB2DSTSN QWHSWSEQ | X | X | X | X | X |
DSUEGENC Parallel Groups Executed Sequential DB2EGENC QXDEGENC | X | X | X | X | X |
DSUELGZP Accumulated CPU Time zIIP-Eligible Work DSUELGZP QWACZIIP_ELIGIBLE | | | X | X | |

Chapter 6: DATA SOURCES 365

6.3 Data Element/Data Source Cross-Reference

DSUENDSC Ending Store Clock DSUENDSC QWACESC | X | X | X | X | X |

DSUENTCB Ending TCB Timer DSUENTCB QWACEJST | X | X | X | X | X |
DSUENTEX Number of Entry/Exit Events Processed DSUENTEX QWACARNA | X | X | X | X | X |
DSUET2TM Elapsed Time in DB2 DSUET2TM QWACASC | X | X | X | X | X |
DSUEUTX End User Transaction Name DSUEUTX QWHCEUTX | X | X | X | X | X |
DSUEUWN End User Workstation Name DSUEUWN QWHCEUWN | X | X | X | X | X |
DSUFCCT No. Wait Trace Events - Force-At-Commit DB2FCCT QWAXFCCT | | X | X | X | X |
DSUFETCH Number of FETCH Statements DSUFETCH QXFETCH | X | X | X | X | X |
DSUFLGS Accounting Class Flags DSUFLGS QWACFLGS | X | X | X | X | X |
DSUFLSE No. of False Contentions DSUFLSE QTGAFLSE | X | X | X | X | X |
DSUFRIDS Times RID List Overflowed RID Storage DB2FRIDS QXWFRIDS | | | | | X |
DSUFRIDT Times RID List Overflowed RID Exceeded DB2FRIDT QXWFRIDT | | | | | X |
DSUGPGR0 GETPAGE Requests BP0 DB2GPGRX QBACGET | X | X | X | X | X |
DSUGPGR1 GETPAGE Requests BP1 DB2GPGRX QBACGET | X | X | X | X | X |
DSUGPGR2 GETPAGE Requests BP2 DB2GPGRX QBACGET | X | X | X | X | X |
DSUGPGR3 GETPAGE Requests BP3 DB2GPGRX QBACGET | X | X | X | X | X |
DSUGRANT GRANT Statements DSUGRANT QXGRANT | X | X | X | X | X |
DSUHPG0 No. Pages HPOOL to VPOOL Prefetch BP0 DB2HPGX QBACHPG | X | X | | | |
DSUHPG1 No. Pages HPOOL to VPOOL Prefetch BP1 DB2HPGX QBACHPG | X | X | | | |
DSUHPG2 No. Pages HPOOL to VPOOL Prefetch BP2 DB2HPGX QBACHPG | X | X | | | |
DSUHPG3 No. Pages HPOOL to VPOOL Prefetch BP3 DB2HPGX QBACHPG | X | X | | | |
DSUHRE0 No. Sync Req Page HPOOL to VPOOL BP0 DB2HREX QBACHRE | X | X | | | |
DSUHRE1 No. Sync Req Page HPOOL to VPOOL BP1 DB2HREX QBACHRE | X | X | | | |
DSUHRE2 No. Sync Req Page HPOOL to VPOOL BP2 DB2HREX QBACHRE | X | X | | | |
DSUHRE3 No. Sync Req Page HPOOL to VPOOL BP3 DB2HREX QBACHRE | X | X | | | |
DSUHRF0 No. Unsuccessful Read Req Exp Stg BP0 DB2HRFX QBACHRF | X | X | | | |
DSUHRF1 No. Unsuccessful Read Req Exp Stg BP1 DB2HRFX QBACHRF | X | X | | | |
DSUHRF2 No. Unsuccessful Read Req Exp Stg BP2 DB2HRFX QBACHRF | X | X | | | |
DSUHRF3 No. Unsuccessful Read Req Exp Stg BP3 DB2HRFX QBACHRF | X | X | | | |
DSUHWF0 No. Unsuccessful Write Req Exp Stg BP0 DB2HWFX QBACHWF | X | X | | | |
DSUHWF1 No. Unsuccessful Write Req Exp Stg BP1 DB2HWFX QBACHWF | X | X | | | |
DSUHWF2 No. Unsuccessful Write Req Exp Stg BP2 DB2HWFX QBACHWF | X | X | | | |
DSUHWF3 No. Unsuccessful Write Req Exp Stg BP3 DB2HWFX QBACHWF | X | X | | | |
DSUHWR0 No. Sync Req Move VPOOL to HPOOL BP0 DB2HWRX QBACHWR | X | X | | | |
DSUHWR1 No. Sync Req Move VPOOL to HPOOL BP1 DB2HWRX QBACHWR | X | X | | | |
DSUHWR2 No. Sync Req Move VPOOL to HPOOL BP2 DB2HWRX QBACHWR | X | X | | | |
DSUHWR3 No. Sync Req Move VPOOL to HPOOL BP3 DB2HWRX QBACHWR | X | X | | | |
DSUIGLO Suspends Due to IRLM Global Contention DSUIGLO QTGAIGLO | X | X | X | X | X |
DSUINCRB Incremental Binds DSUINCRB QXINCRB | X | X | X | X | X |
DSUNFLMT No. Infinite Resource Limit DSUNFLMT QTXAFLG1 | X | X | | | |
DSUINSRT INSERT Statements DSUINSRT QXINSRT | X | X | X | X | X |
DSUIOETM Accumulated I/O Elapsed Wait Time in DB2 DSUIOETM QWACAWTI | X | X | X | X | X |
DSUISEQ Instrumentation Sequence Number DB2ISEQ QWHSISEQ | X | X | X | X | X |
DSUJINCS Times RID List Append RID Storage DB2JINCS QXHJINCS | | | | | X |
DSUIXLE No. Wait Trace Events - Async IXLCACHE DB2IXLE QWAXIXLE | X | X | X | X | X |
DSUIXLTM Total Wait Time IXLCACHE/FCOMP Asynch DB2IXLTM QWAXIXLT | X | X | X | X | X |
DSUJINCT Times RID List Append RID Exceeded DB2JINCT QXHJINCT | | | | | X |
DSULABEL Number of LABEL ON Statements DSULABEL QXLABON | X | X | X | X | X |
DSULEEM Number of Lock Escalations to Exclusive DSULEEM QTXALEX | X | X | X | X | X |
DSULESM Number of Lock Escalations to Shared DSULESM QTXALES | X | X | X | X | X |
DSULOCK LOCK TABLE Statements DSULOCK QXLOCK | X | X | X | X | X |
DSULPF0 No. List Prefetch Requested BP0 DB2LPFX QBACLPF | X | X | X | X | X |
DSULPF1 No. List Prefetch Requested BP1 DB2LPFX QBACLPF | X | X | X | X | X |
DSULPF2 No. List Prefetch Requested BP2 DB2LPFX QBACLPF | X | X | X | X | X |
DSULPF3 No. List Prefetch Requested BP3 DB2LPFX QBACLPF | X | X | X | X | X |
DSULPLK Lock Requests for Physical Locks DSULPLK QTGALPLK | X | X | X | X | X |
DSULSLM Lock Requests Propagated to XES DSULSLM QTGALSLM | X | X | X | X | X |
DSUMERGE Merge Statements DB2MERGE QXMERGE | | | | X | X |
DSUMIOTM Max I/O Elapsed Wait Time in DB2 DSUMIOTM QWACAWTI | X | X | X | X | X |
DSUMIXNL Mult Indx Not Used - RID Limit DSUMIXNL QXMRMIAP | X | X | X | X | X |
DSUMIXNU Mult Indx Not Used - No Storage DSUMIXNU QXNSMIAP | X | X | X | X | X |
DSUMIXU Multiple Index Path Used DSUMIXU QXMIAP | X | X | X | X | X |
DSUMMXPL Max Max. No. Page Locks Held DSUMMXPL QTXANPL | X | X | X | X | X |
DSUMXDEG Max Degree of Parallelism DB2MXDEG QXMAXDEG | X | X | X | X | X |
DSUMXPL Maximum Number of Page Locks Held DSUMXPL QTXANPL | X | X | X | X | X |
DSUNATHD Count of ACCUMACC Roll-up Threads DSUNATHD QWACPCNT | X | X | X | X | X |
DSUNETID Network Identifier DSUNETID QWACNID | X | X | X | X | X |
DSUNGT0 No. Time GETPAGE Req Not Satisfied BP0 DB2NGTX QBACNGT | X | X | X | X | X |
DSUNGT1 No. Time GETPAGE Req Not Satisfied BP1 DB2NGTX QBACNGT | X | X | X | X | X |
DSUNGT2 No. Time GETPAGE Req Not Satisfied BP2 DB2NGTX QBACNGT | X | X | X | X | X |
DSUNGT3 No. Time GETPAGE Req Not Satisfied BP3 DB2NGTX QBACNGT | X | X | X | X | X |
DSUNOGRP Total Number of Parallel Groups That DB2NOGRP QXNORGRP | X | X | X | X | X |
DSUNTFY Notify Messages Sent DSUNTFY QTGANTFY | X | X | X | X | X |
DSUOCNS No. Wait Trace Events - Open/Close/HSM DB2OCNS QWAXOCNS | X | X | X | X | X |

366 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSUOCSTM Accum Wait Time Open/Close/HSM DB2OCSTM QWAXOCSE | X | X | X | X | X |

DSUOPEN OPEN Statements DSUOPEN QXOPEN | X | X | X | X | X |
DSUOPID Original Operator ID DB2OPID QWHCOPID | X | X | X | X | X |
DSUORNO Parallel Groups Executed Coordination DB2ORNO QXCOORNO | X | X | X | X | X |
DSUORR Parallel Groups Executed Repeat-read DB2ORR QXISORR | X | X | X | X | X |
DSUOTNS No. Wait Trace Events - Other Services DB2OTNS QWAXOTNS | X | X | X | X | X |
DSUOTSTM Accum Wait Time Other DB2 Services DB2OTSTM QWAXOTSE | X | X | X | X | X |
DSUPACE Parallel Task Token DSUPACE QWACPACE | X | X | X | X | X |
DSUPARR No. Rollup Data DSUPARR QWACFLGS | X | X | | | |
DSUPCNT No. Parallel Tasks Created DSUPCNT QWACPCNT | X | X | X | X | X |
DSUPCWDP Duplicate Per Parsed Dyna Stmnts DB2PCWDP | | | | | X |
DSUPCWMP Matched Per Parsed Dyna Stmnts DB2PCWMP | | | | | X |
DSUPCWRP Replaced Per Parsed Dyna Stmnts DB2PCWRP | | | | | X |
DSUPEDTM Accum CPU Proc SQL Prior Enclave DB2PEDTM QWACPECD | X | X | X | | |
DSUPETTM Accum TCB Prior Enclave Create DB2PETTM QWACPECT | X | X | X | | |
DSUPGDTT Parallel GPS Using UDF - Ex. Single DB2 DB2PGDTT QXDEGDTT | X | X | X | X | X |
DSUPKGN No. Packages or DBRMs DSUPKGN QWACPKGN | X | X | X | X | X |
DSUPLAN Plan Name DB2PLAN QWHCPLAN | X | X | X | X | X |
DSUPLAT Client Platform DSUPLAT QMDAPLAT | X | X | X | X | X |
DSUPREP PREPARE Statements DSUPREP QXPREP | X | X | X | X | X |
DSUPRFH0 PREFETCH Read Requests Buffer BP0 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSUPRFH1 PREFETCH Read Requests Buffer BP1 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSUPRFH2 PREFETCH Read Requests Buffer BP2 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSUPRFH3 PREFETCH Read Requests Buffer BP3 DB2PRFHX QBACSEQ | X | X | X | X | X |
DSURBSV No. SQL Rollback to Savepoint Stmts DB2RBSV QWACRBSV | X | X | X | X | X |
DSURDGRP Total Number of Parallel Groups That DB2RDGRP QXREDGRP | X | X | X | X | X |
DSURDLTD Deleted Rows DB2RDLTD QXRWSDELETD | | | X | X |
DSUREVOK REVOKE Statements DSUREVOK QXREVOK | X | X | X | X |
DSURFCHD Fetched Rows DB2RFCHD QXRWSFETCHD | | | X | X |
DSURLSV No. SQL Release Savepoint Statements DB2RLSV QWACRLSV | X | X | X | X |
DSURMID DB2 Resource Manager Identifier DB2RMID QWHSRMID | X | X | X | X |
DSURNIX Rename Index Statements DB2RNIX QXRNIX | | | | X | X |
DSURNKCL No. Wait Trace Glbl Cont. Child LLock DB2RNKCL QWACARNK | | | X | X | X |
DSURNMOL No. Wait Trace Glbl Cont. Other LLock DB2RNMOL QWACARNM | | | X | X | X |
DSURNNPL No. Wait Trace Glbl Cont. PP PLock DB2RNNPL QWACARNN | | | X | X | X |
DSURNOPL No. Wait Trace Glbl Cont. PG PLock DB2RNOPL QWACARNO | | | X | X | X |
DSURNQOL No. Wait Trace Glbl Cont. Other PLock DB2RNQOL QWACARNQ | | | X | X | X |
DSURNSTD Inserted Rows DB2RNSTD QXRWSINSRTD | | | X | X |
DSURPOP1 Parallel GPS Reformatted - Sysplex Conf DB2RPOP1 QXREPOP1 | X | X | X | X |
DSURPOP2 Parallel GPS Reformatted - Buffer Resrc DB2RPOP2 QXREPOP2 | X | X | X | X |
DSURUDTD Updated Rows DB2RUDTD QXRWSUPDTD | | | X | X |
DSUSDG Total Unregister Pages Requests DB2SDG QBGADG | X | X | X | X | X |
DSUSELCT Number of SELECT Statements DSUSELCT QXSELECT | X | X | X | X | X |
DSUSETHV No. SET HOST-VAR Statements DSUSETHV QXSETHV | X | X | X | X | X |
DSUSEX Total Explicit XIs DB2SEX QBGAEX | X | X | X | X | X |
DSUSGG Total GETPAGEs for GBP-Dep Pagesets DB2SGG QBGAGG | | X | X | X | X |
DSUSGLO Suspends Due to XES Global Contention DSUSGLO QTGASGLO | X | X | X | X | X |
DSUSHS Total Asynch IXLCACHE for Prim GBP DB2SHS QBGAHS | X | X | X | X | X |
DSUSIO0 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSUSIO1 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSUSIO2 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSUSIO3 Number of Sync Read I/Os Issued DB2SIOX QBSTSIO | X | X | X | X | X |
DSUSKIP Parallel Coordination Bypass DB2 DB2SKIP QXXCSKIP | X | X | X | X | X |
DSUSLNS No. Wait Trace Events - SYSLGRNG DB2SLNS QWAXSLNS | X | X | X | X | X |
DSUSLSTM Accum Wait Time SYSLGRNG DB2SLSTM QWAXSLSE | X | X | X | X | X |
DSUSMD Total CF Reads Data Returned DSUSMD QBGAMD | X | X | X | X | X |
DSUSMIAP Times RID List Retrieval Skipped DB2SMIAP QXRSMIAP | | | | | X |
DSUSMN Total CF Reads Data Not Ret. No Entry DSUSMN QBGAMN | X | X | X | X | X |
DSUSMR Total CF Reads Data Not Returned Entry DSUSMR QBGAMR | X | X | X | X | X |
DSUSPATM Total Elapsed Time Stored Procedures DB2SPATM QWACSPEA | X | X | X | X | X |
DSUSPBTM Total Elapsed Time in DB2 Stored Proc. DB2SPBTM QWACSPEB | X | X | X | X | X |
DSUSPCTM Accum CPU Time SQL Procedures Main Unit DB2SPCTM QWACSPNF_CP | | | | X | X |
DSUSPETM Total Elapsed Time Wait for TCB DSUSPETM QWACCAST | X | X | X | X | X |
DSUSPNE SQL Events by Stored Procs DSUSPNE QWACSPNE | X | X | X | X | X |
DSUSPPTM CPU Time Stored Proc Address Space DSUSPPTM QWACSPCP | X | X | X | X | X |
DSUSPRU0 System Page Record Update BP0 DB2SPRUX QBACSWS | X | X | X | X | X |
DSUSPRU1 System Page Record Update BP1 DB2SPRUX QBACSWS | X | X | X | X | X |
DSUSPRU2 System Page Record Update BP2 DB2SPRUX QBACSWS | X | X | X | X | X |
DSUSPRU3 System Page Record Update BP3 DB2SPRUX QBACSWS | X | X | X | X | X |
DSUSPZET Total Elapsed Time on zIIP Stored Proc. DB2SPZET QWACSPNF_ELAP | | | | X | X |
DSUSPZTM CPU Tm Exec Strd Proc on z/OS Spec Eng DB2SPZTM QWACSPNF_CP | | | | X | X |
DSUSP1 P-Lock Lock Requests-Space Map Pages1 DB2SP1 QBGAP1 | | X | X | X | X |
DSUSP2 P-Lock Lock Requests-Data Pages2 DB2SP2 QBGAP2 | | X | X | X | X |
DSUSP2TM Accum CPU Time in DB2 Stored Proc. DSUSP2TM QWACSPTT | X | X | X | X | X |

Chapter 6: DATA SOURCES 367

6.3 Data Element/Data Source Cross-Reference

DSUSP3 P-Lock Lock Requests-Index Leaf Pages3 DB2SP3 QBGAP3 | | X | X | X | X |

DSUSPSE1 Accum CPU Tm Exec SP on z/OS Spec Eng DSUSPSE1 QWACSP_CLS1se | | | | X | X |
DSUSPSE2 CPU Tm in DB2 Exec SP on z/OS Spec Eng DSUSPSE2 QWACSP_CLS2se | | | | X | X |
DSUSQLID No. Of Set Current SQLID DSUSQLID QXSETSQL | X | X | X | X | X |
DSUSRIO0 Synchronous Read IOs BP0 DB2SRIOX QBACRIO | X | X | X | X | X |
DSUSRIO1 Synchronous Read IOs BP1 DB2SRIOX QBACRIO | X | X | X | X | X |
DSUSRIO2 Synchronous Read IOs BP2 DB2SRIOX QBACRIO | X | X | X | X | X |
DSUSRIO3 Synchronous Read IOs BP3 DB2SRIOX QBACRIO | X | X | X | X | X |
DSUSSW Total CF Writes For Changed Pages DSUSSW QBGASW | X | X | X | X | X |
DSUSS1 P-Lock Lock Susp. - Space Map Pages 1 DB2SS1 QBGAS1 | | X | X | X | X |
DSUSS2 P-Lock Lock Suspensions - Data Pages 2 DB2SS2 QBGAS2 | | X | X | X | X |
DSUSS3 P-Lock Lock Susp. - Index Leaf Pages 3 DB2SS3 QBGAS3 | | X | X | X | X |
DSUSUCV SU:CPU-second Conversion Factor DB2SUCV QWACSUCV | X | X | X | X | X |
DSUSUFX DDCS Client Suffix DSUSUFX QMDASUFX | X | X | X | X | X |
DSUSUSP Suspend Count DSUSUSP QTXASLOC | X | X | X | X | X |
DSUSU1 P-Lock Unlock Requests1 DB2SU1 QBGAU1 | | X | X | X | X |
DSUSVPT No. SQL Savepoint Statements DB2SVPT QWACSVPT | X | X | X | X | X |
DSUSWC Total CF Writes For Clean Pages DSUSWC QBGAWC | X | X | X | X | X |
DSUSWM Total Write and Register Multiple Reqs DB2SWM QBGAWM | | | X | X | X |
DSUSWS Total Write and Register Requests DB2SWS QBGAWS | | | X | X | X |
DSUSXD Total CF Reads Buffer XI DSUSXD QBGAXD | X | X | X | X | X |
DSUS2H Total Asynch IXLCACHE for 2nd GBP DB2S2H QBGA2H | X | X | X | X | X |
DSUS2S Total Comp Chks 4 Wrts 2nd GBP Suspend DB2S2S QBGA2S | X | X | X | X | X |
DSUS2W Total Wrts of Chg Pgs 2nd GBP Duplex DB2S2W QBGA2W | X | X | | | |
DSUTC2TM Class 2 Accumulated TCB Time in DB2 DSUTC2TM QWACAJST | X | X | X | X | X |
DSUTEETM Total Elps Tm Exec Trigger Undr Enclave DB2TEETM QWACTREE | X | X | X | X | X |
DSUTIMO Timeout Count DSUTIMO QTXATIM | X | X | X | X | X |
DSUTOGRP Total Number of Parallel Groups DB2TOGRP QXTOTGRP | X | X | X | X | X |
DSUTRTSE Accum CPU Tm Exe Trgrs on z/OS Spec Eng DSUTRTSE QWACTRTE_se | | | | X | X |
DSUTRETM Elapsed Time Executing Control Triggers DB2TRETM QWACTRET | X | X | X | X | X |
DSUTRTBL Truncate Table Statements DB2TRTBL QXTRTBL | | | | X | X |
DSUTRTTM Accum TCB Time Under Cntl Trigger DB2TRTTM QWACTRTT | X | X | X | X | X |
DSUTRTZP CPU Tm Exec Triggers on z/OS Spec Eng DSUTRTZP QWACTRTT_ZIIP | | | X | X | X |
DSUTTETM Total TCB Tm Exec Trigger Undr Enclave DB2TTETM QWACTRTE | X | X | X | X | X |
DSUUDATM Total Elapsed Time UDF DB2UDATM QWACUDEA | X | X | X | X | X |
DSUUDBTM Total Elapsed Time in DB2 UDF DB2UDBTM QWACUDEB | X | X | X | X | X |
DSUUDCTM Accum CPU Time UDF DB2UDCTM QWACUDCP | X | X | X | X | X |
DSUUDSE1 Accum CPU Tm Exec UDF on z/OS Spec Eng DB2UDSE1 QWACUDF_CLS1se | | | | X | X |
DSUUDSE2 CPU Tm in DB2 Exec UDF on z/OS Spec Eng DB2UDSE2 QWACUDF_CLS2se | | | | X | X |
DSUUDSTM Total Elapsed Time UDF Wait for TCB DB2UDSTM QWACUDST | X | X | X | X | X |
DSUUDTTM Accum CPU Time in DB2 UDF DB2UDTTM QWACUDTT | X | X | X | X | X |
DSUUPDTE UPDATE Statements DSUUPDTE QXUPDTE | X | X | X | X | X |
DSUUPLK Unlock Requests for Physical Locks DSUUPLK QTGAUPLK | X | X | X | X | X |
DSUUSLM Unlock Requests Propagated to XES DSUUSLM QTGAUSLM | X | X | X | X | X |
DSUWATRA No. Wait Trace Events for Log Reads DSUWATRA QWACANAR | | | | | |
DSUWATRA No. Wait Trace Events for Log Reads DSUWATRA QWAXANAR | X | X | X | X | X |
DSUWATRB Wt Trace for TCP/IP LOB Material DB2WATRB QWACALBC | | | | X | X |
DSUWATRC Wait Trace for Claims DSUWATRC QWACARNC | | | | | |
DSUWATRC Wait Trace for Claims DSUWATRC QWAXARNC | X | X | X | X | X |
DSUWATRD Wait Trace for Drain Lock DSUWATRD QWACARND | | | | | |
DSUWATRD Wait Trace for Drain Lock DSUWATRD QWAXARND | X | X | X | X | X |
DSUWATRG No. Wait Trace for Global Lock DSUWATRG QWACARNJ | X | X | X | X | X |
DSUWATRL No. Wait Trace Events for Lock/Latch DSUWATRL QWACARNL | X | X | X | X | X |
DSUWATRM No. Wait Trace Events for Data Shr Msgs DSUWATRM QWACARNG | X | X | X | X | X |
DSUWATRP Wait Trace for Latch Contention DSUWATRP QWACARNH | X | X | X | X | X |
DSUWATRR No. Wait Trace Events for Read Other DSUWATRR QWACARNR | X | X | X | X | X |
DSUWATRW No. Wait Trace Events for Write Other DSUWATRW QWACARNW | X | X | X | X | X |
DSUWATSE No. Wait Trace Events for Sync. Exec. DSUWATSE QWACARNS | X | X | X | X | X |
DSUWATTR Number of Wait Trace Events Processed DSUWATTR QWACARNE | X | X | X | X | X |
DSUWFCTM Total Wait Time for Force-At-Commit DB2WFCTM QWAXAWFC | X | X | X | X | X |
DSUWLCTM Glbl Contention Child L-Lock Wait Time DB2WLCTM QWACAWTK | | | X | X | X |
DSUWGLTM Glbl Contention PG P-Lock Wait Time DB2WGLTM QWACAWTO | | | X | X | X |
DSUWLLTM Glbl Contention Other L-Locks Wait Time DB2WLLTM QWACAWTM | | | X | X | X |
DSUWLPTM Glbl Contention PP P-Lock Wait Time DB2WLPTM QWACAWTN | | | X | X | X |
DSUWTOTM Glbl Contention Other P-Locks Wait Time DB2WTOTM QWACAWTQ | | | X | X | X |
DSUWLGCT No. Wait Trace Events - Log Write IO DB2WLGCT QWACARLG | X | X | X | X | X |
DSUWLGTM Accum Wait Time for Log Write IO DB2WLGTM QWACAWLG | X | X | X | X | X |
DSUWLMCL WLM Service Class Name DB2WLMCL QWACWLME | X | X | X | X | X |
DSUZRLMT No. Zero Resource Limit DSUZRLMT QTXAFLG1 | X | X | | | |
----------------------------------------------------------------------------------------------------------------------------------

368 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

The DB2DSY (DB2 System Activity) File

Chapter 6: DATA SOURCES 369

6.3 Data Element/Data Source Cross-Reference

----------------------------------------------------------------------------------------------------------------------------------
DICTIONARY RAW AVAILABLE IN DB2 VERSIONS
ELEMENT ELEMENT DESCRIPTION MEMBER ELEMENT 6.1 7.1 8.1 9.1 10.1
----------------------------------------------------------------------------------------------------------------------------------
DB2ATNM Active Trace Number Mask DB2ATNM QWHSMTN | X | X | X | X | X |
DB2DSGN Data Sharing Group Name DB2DSGN QWHADSGN | X | X | X | X | X |
DB2MEMN DB2 Member Name DB2MEMN QWHAMEMN | X | X | X | X | X |
DSYAAQLT SSSC Allied Agent Queue Latch DSYAAQLT QVLSLC10 | X | X | X | X | X |
DSYABORT Successful Aborts DSYABORT Q3STABRT | X | X | X | X | X |
DSYACFTQ ACCUMACC Count: Failure to Qualify DSYACFTQ QWSDARIR | | | X | X | X |
DSYACSTL ACCUMACC Count: Staleness DSYACSTL QWSDARST | | | X | X | X |
DSYACSTR ACCUMACC Count: Storage Exceeded DSYACSTR QWSDARSG | | | X | X | X |
DSYACUTR ACCUMACC Count: Threshold Exceeded DSYACUTR QWSDARTH | | | X | X | X |
DSYALGCI Active Log Control Intervals DSYALGCI QJSTBFFL | X | X | X | X | X |
DSYALOCD Allocation Deadlock DSYALOCD QVASADDL | X | X | X | X | X |
DSYARLOG Archive Log Count DSYARLOG Q9STCTRM | X | X | X | X | X |
DSYARLRA Archive Log Read Allocations DSYARLRA QJSTALR | X | X | X | X | X |
DSYARLWA Archive Log Write Allocations DSYARLWA QJSTALW | X | X | X | X | X |
DSYASALT Address Space Active Latch DSYASALT QVLSLC27 | X | X | X | X | X |
DSYASP0 Start Address Space Procedure DB2APROC QWSAPROC | X | X | X | X | X |
DSYASP1 Start Address Space Procedure DB2APROC QWSAPROC | X | X | X | X | X |
DSYASP2 Start Address Space Procedure DB2APROC QWSAPROC | X | X | X | X | X |
DSYASP3 Start Address Space Procedure DB2APROC QWSAPROC | X | X | X | X | X |
DSYASP4 Start Address Space Procedure DB2APROC QWSAPROC | X | X | X | X | X |
DSYASP5 Start Address Space Procedure DB2APROC QWSAPROC | X | X | X | X | X |
DSYASSLT Service Queue Latch DSYASSLT QVLSLC28 | X | X | X | X | X |
DSYAUSRS Async Unrelated SRBs Scheduled DSYAUSRS QVASXAUS | X | X | X | X | X |
DSYAUTCS Async Unrelated TCBs Scheduled DSYAUTCS QVASXAUT | X | X | X | X | X |
DSYBFERA Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFERB Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFERC Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFERD Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFERE Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFERF Count of Buffer Errors n DSYBFERX QWSBSBUF | | | | X | X |
DSYBFER1 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER2 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER3 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER4 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER5 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER6 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER7 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER8 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBFER9 Count of Buffer Errors n DSYBFERX QWSBSBUF | X | X | X | X | X |
DSYBMELT Buffer Manager Exclusive Latch DSYBMELT QVLSLC14 | X | X | X | X | X |
DSYBMSLT Buffer Manager Shared Latch DSYBMSLT QVLSLC13 | X | X | X | X | X |
DSYBM2LT Buffer Manager Exclusive 2 Latch DSYBM2LT QVLSLC23 | X | X | X | X | X |
DSYBNASA Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASB Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASC Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASE Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASF Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASG Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASH Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASI Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASP Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASS Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNAST Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASU Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBNASX Buffer-Not-Available Errors DB2BNAER QWSCSBNA | X | X | X | X | X |
DSYBPAG Log Write Buffer Page-ins DSYBPAG QJSTBPAG | X | X | X | X | X |
DSYBSDSA BSDS Accesses DSYBSDSA QJSTBSDS | X | X | X | X | X |
DSYCDDD Data Capture Descriptions Returned DSYCDDD QWSDCDDD | X | X | X | X | X |
DSYCDDR Data Capture Log Rows Returned DSYCDDR QWSDCDDR | X | X | X | X | X |
DSYCDLC Log Records Captured DSYCDLC QWSDCDLC | X | X | X | X | X |
DSYCDLR Data Capture Log Reads Performed DSYCDLR QWSDCDLR | X | X | X | X | X |
DSYCDMB Data Capture Describes Performed DSYCDMB QWSDCDMB | X | X | X | X | X |
DSYCDRR Data Capture Log Records Returned DSYCDRR QWSDCDRR | X | X | X | X | X |
DSYCDTB Data Capture Tables Returned DSYCDTB QWSDCDTB | X | X | X | X | X |
DSYCIN2 Current Inactive Connections DSYCIN2 QDSTCIN2 | X | X | X | X | X |
DSYCIWR Log CI-s Written DSYCIWR QJSTCIWR | X | X | X | X | X |
DSYCNAT Current Active DBATs DSYCNAT QDSTCNAT | X | X | X | X | X |
DSYCNINO Control Intervals Offloaded DSYCNINO QJSTCIOF | X | X | X | X | X |
DSYCOLFA Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |

370 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSYCOLFB Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |

DSYCOLFC Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFD Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFE Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFF Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFG Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFH Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFI Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFP Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFS Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFT Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFU Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOLFX Collection Failures DB2COLFL QWSCSCF | X | X | X | X | X |
DSYCOMM Successful Commits DSYCOMM Q3STCOMM | X | X | X | X | X |
DSYCONEC Successful Connects to DB2 DSYCONEC Q3STIDEN | X | X | X | X | X |
DSYCONTR Contractions Due to Storage DSYCONTR QSSTCONT | X | X | X | X | X |
DSYCPTM0 Accumulated CPU Time for Address Space x DSYCPTMX QWSAEJST | X | X | X | X | X |
DSYCPTM1 Accumulated CPU Time for Address Space x DSYCPTMX QWSASRBT | X | X | X | X | X |
DSYCPTM3 Accumulated CPU Time for Address Space x DSYCPTMX QWSASRBT | X | X | X | X | X |
DSYCPTM4 Accumulated CPU Time for Address Space x DSYCPTMX QWSASRBT | X | X | X | X | X |
DSYCPTM5 Accumulated CPU Time for Address Space x DSYCPTMX QWSASRBT | X | X | X | X | X |
DSYCPUTM Accumulated CPU Time All ASIDs DSYCPUTM QWSAEJST | X | X | X | X | X |
DSYCPUTM Accumulated CPU Time All ASIDs DSYCPUTM QWSASRBT | X | X | X | X | X |
DSYCSTR Cold Start Connections DSYCSTR QDSTCSTR | X | X | X | X | X |
DSYCTHDW Create Thread Requests Waited DSYCTHDW Q3STCTHW | X | X | X | X | X |
DSYCTHRD Successful Create Threads DSYCTHRD Q3STCTHD | X | X | X | X | X |
DSYCWRAL Calls to Write Active Log DSYCWRAL QJSTBFWR | X | X | X | X | X |
DSYDBALT Database Allocation Control Latch DSYDBALT QVLSLC12 | X | X | X | X | X |
DSYDDFCN Cancel DDF Commands DSYDDFCN Q9STCTRK | X | X | X | X | X |
DSYDDFSP Stop DDF Commands DSYDDFSP Q9STCTRJ | X | X | X | X | X |
DSYDDFST START DDF Commands DSYDDFST Q9STCTRI | X | X | X | X | X |
DSYDISPT DISPLAY TRACE Commands DSYDISPT Q9STCTRC | X | X | X | X | X |
DSYDMLT Data Manager Latch DSYDMLT QVLSLC26 | X | X | X | X | X |
DSYDSCA Count of IFI Abends DSYDSCA QWSDSCA | X | X | X | X | X |
DSYDSCCO Count of IFI Command Requests DSYDSCCO QWSDSCCO | X | X | X | X | X |
DSYDSCRA Count of IFI Reada Requests DSYDSCRA QWSDSCA | X | X | X | X | X |
DSYDSCRS Count of IFI Reads Requests DSYDSCRS QWSDSCRS | X | X | X | X | X |
DSYDSCU Count of IFI Unrecognized Functions DSYDSCU QWSDSCU | X | X | X | X | X |
DSYDSCWR Count of IFI Write Requests DSYDSCWR QWSDSCWR | X | X | X | X | X |
DSYDSPDB DISPLAY DATABASE Commands DSYDSPDB Q9STCTR0 | X | X | X | X | X |
DSYDSPLC DISP LOCATION Commands DSYDSPLC Q9STCTRL | X | X | X | X | X |
DSYDSPTH DISPLAY THREAD Commands DSYDSPTH Q9STCTR1 | X | X | X | X | X |
DSYDSPUT DISPLAY UTILITY Commands DSYDSPUT Q9STCTR2 | X | X | X | X | X |
DSYDSTSN Destination Sequence Number DSYDSTSN QWHSWSEQ | X | X | X | X | X |
DSYEOMEM End of Memory DSYEOMEM Q3STMEOM | X | X | X | X | X |
DSYEOTSK End of Task DSYEOTSK Q3STMEOT | X | X | X | X | X |
DSYEXIT Successful DSN3EXITs DSYEXIT Q3STEXIT | X | X | X | X | X |
DSYFPCRT Fixed Pools Created DSYFPCRT QSSTGPLF | X | X | X | X | X |
DSYFPDEL Fixed Pools Deallocated DSYFPDEL QSSTFPLF | X | X | X | X | X |
DSYFPSGC Fixed Pool Segments Contracted DSYFPSGC QSSTCONF | X | X | X | X | X |
DSYFPSGE Fixed Pool Segments Expanded DSYFPSGE QSSTEXPF | X | X | X | X | X |
DSYFPSGF Fixed Pool Segments Freed DSYFPSGF QSSTFREF | X | X | X | X | X |
DSYFREMN FREEMAIN Requests DSYFREMN QSSTFREM | X | X | X | X | X |
DSYGETMN GETMAIN Requests DSYGETMN QSSTGETM | X | X | X | X | X |
DSYHRBA High Used Log RBA DSYHRBA QWSDLR | X | X | X | X | X |
DSYHUHCM Unrecognized Commands DSYHUHCM Q9STEROR | X | X | X | X | X |
DSYHWCT High Water Mark for CTHREAD Threads DSYHWCT Q3STHWCT | | | X | X | X |
DSYHWIB High Water Mark for IDBACK Threads DSYHWIB Q3STHWIB | | | X | X | X |
DSYHWIF High Water Mark for IDFORE Threads DSYHWIF Q3STHWIF | | | X | X | X |
DSYIDESA Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDESB Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDESC Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDESE Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDESF Instrumentation Destination n DSYIDESX QWSBNM | | | | X | X |
DSYIDES1 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES2 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES3 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES4 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES5 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES6 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES7 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES8 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIDES9 Instrumentation Destination n DSYIDESX QWSBNM | X | X | X | X | X |
DSYIFCNA IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |

Chapter 6: DATA SOURCES 371

6.3 Data Element/Data Source Cross-Reference

DSYIFCNB IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |

DSYIFCNC IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCND IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNE IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNF IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNG IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNH IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNI IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNP IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNS IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNT IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNU IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCNX IFC Records Not Written DB2IFCRN QWSCSRNW | X | X | X | X | X |
DSYIFCSD IFCID Sequence Number DB2IFCSN QWSCISEQ | X | X | X | X | X |
DSYIFCSS IFCID Sequence Number DB2IFCSN QWSCISEQ | X | X | X | X | X |
DSYIFCSU IFCID Sequence Number DB2IFCSN QWSCISEQ | X | X | X | X | X |
DSYIFCSX IFCID Sequence Number DB2IFCSN QWSCISEQ | X | X | X | X | X |
DSYIFCWA IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWB IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWC IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWD IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWE IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWF IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWG IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWH IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWI IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWP IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWS IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWT IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYIFCWX IFC Records Successfully Written DB2IFCRW QWSCSRSW | X | X | X | X | X |
DSYINDBT Number of In Doubt Threads DSYINDBT Q3STINDT | X | X | X | X | X |
DSYINSEA Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSEB Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSEC Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSED Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSEE Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSEF Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | | | | X | X |
DSYINSE2 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE3 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE4 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE5 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE6 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE7 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE8 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINSE9 Instrumentation Sequence Count n DSYINSEX QWSBWSEQ | X | X | X | X | X |
DSYINVAL Invalid Resource DSYINVAL QVASADIR | X | X | X | X | X |
DSYISEQ Instrumentation Sequence Number DSYISEQ QWHSISEQ | X | X | X | X | X |
DSYITLC Index Tree Latch Contentions DSYITLC QVLSLC254 | | | | X | X |
DSYLAMA Look Ahead Tape Mounts Attempted DSYLAMA QJSTLAMA | X | X | X | X | X |
DSYLAMS Look Ahead Tape Mounts Performed DSYLAMS QJSTLAMS | X | X | X | X | X |
DSYLAT02 Contentions Latch Class 2 DSYLAT02 QVLSLC02 | X | X | X | X | X |
DSYLAT03 Contentions Latch Class 3 DSYLAT03 QVLSLC03 | X | X | X | X | X |
DSYLAT04 Contentions Latch Class 4 DSYLAT04 QVLSLC04 | X | X | X | X | X |
DSYLAT06 Contentions Latch Class 6 DSYLAT06 QVLSLC06 | X | X | X | X | X |
DSYLAT07 Contentions Latch Class 7 DSYLAT07 QVLSLC07 | X | X | X | X | X |
DSYLAT08 Contentions Latch Class 8 DSYLAT08 QVLSLC08 | X | X | X | X | X |
DSYLAT09 Contentions Latch Class 9 DSYLAT09 QVLSLC09 | X | X | X | X | X |
DSYLAT18 Contentions Latch Class 18 DSYLAT18 QVLSLC18 | X | X | X | X | X |
DSYLAT20 Contentions Latch Class 20 DSYLAT20 QVLSLC20 | X | X | X | X | X |
DSYLAT22 Contentions Latch Class 22 DSYLAT22 QVLSLC22 | X | X | X | X | X |
DSYLAT24 Contentions Latch Class 24 DSYLAT24 QVLSLC24 | X | X | X | X | X |
DSYLAT29 Contentions Latch Class 29 DSYLAT29 QVLSLC29 | X | X | X | X | X |
DSYLBALT Log BSDS Access Latch DSYLBALT QVLSLC21 | X | X | X | X | X |
DSYLGWLT Log Write Function Latch DSYLGWLT QVLSLC19 | X | X | X | X | X |
DSYLOGW Log Write I/O Requests DSYLOGW QJSTLOGW | X | X | X | X | X |
DSYLSUS Log Req Suspended for log wait DSYLSUS QJSTLSUS | X | X | X | X | X |
DSYLWRF Log Write Requests FORCE DSYLWRF QJSTWRF | X | X | X | X | X |
DSYLWRNW Log Write Requests NOWAIT DSYLWRNW QJSTWRNW | X | X | X | X | X |
DSYLWRW Log Write Requests Wait DSYLWRW QJSTWRW | X | X | X | X | X |
DSYMARD Max Currently Active DBAT Pkgs Bound DSYMARD QDSTMARD | | | | | X |
DSYMHLT Data Manager Hash Tables Latch DSYMHLT QVLSLC25 | X | X | X | X | X |
DSYMHWAT Active DBATs High Water Mark DSYMHWAT QDSTHWAT | X | X | X | X | X |
DSYMHWDT Remote Connections High Water Mark DSYMHWDT QDSTHWDT | X | X | X | X | X |
DSYMMADS DBATs Not In Use High Water Mark DSYMMADS QDSTMADS | X | X | X | X | X |

372 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSYMMIN2 Inactive Connections High Water Mark DSYMMIN2 QDSTMIN2 | X | X | X | X | X |

DSYMMQR2 Inactive Connections Queued HWM DSYMMQR2 QDSTMQR2 | X | X | X | X | X |
DSYMQMIT Inactive DBATs High Water Mark DSYMQMIT QDSTQMIT | X | X | X | X | X |
DSYNADS Current DBATs Not In Use DSYNADS QDSTNADS | X | X | X | X | X |
DSYNAERA Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAERC Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAERD Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAERE Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAERF Count of Not-Active Errors n DSYNAERX QWSBSACT | | | | X | X |
DSYNAER1 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER2 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER3 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER4 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER5 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER6 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER7 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER8 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNAER9 Count of Not-Active Errors n DSYNAERX QWSBSACT | X | X | X | X | X |
DSYNARD Currently Active DBAT Pkgs Bound DSYNARD QDSTNARD | | | | | X |
DSYNCKPT Number of DB2 Checkpoints Taken DSYNCKPT QWSDCKPT | X | X | X | X | X |
DSYNDBA DBATs Created DSYNDBA QDSTNDBA | X | X | X | X | X |
DSYNITC Connections Terminated - Max Inactive DSYNITC QDSTNITC | X | X | X | X | X |
DSYNQR2 Current Inactive Connections Queued DSYNQR2 QDSTNQR2 | X | X | X | X | X |
DSYNZGFM Non-zero Returns from GET/FREE DSYNZGFM QSSTRCNZ | X | X | X | X | X |
DSYPOOL Pool DBATs Reused DSYPOOL QDSTPOOL | X | X | X | X | X |
DSYPREPR Successful Prepare to Commits DSYPREPR Q3STPREP | X | X | X | X | X |
DSYQCIT Current Inactive DBATs DSYQCIT QDSTQCIT | X | X | X | X | X |
DSYQCRT Conversations Deallocated - Max Remote DSYQCRT QDSTQCRT | X | X | X | X | X |
DSYQDBT DBATs Queued - Max Remote Active DSYQDBT QDSTQDBT | X | X | X | X | X |
DSYQIN2 Inactive Connections Queued Requests DSYQIN2 QDSTQIN2 | X | X | X | X | X |
DSYRCNAA Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNAB Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNAC Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNAD Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNAE Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNAF Count of Records Not Accepted n DSYRCNAX QWSBSRNA | | | | X | X |
DSYRCNA1 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA2 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA3 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA4 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA5 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA6 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA7 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA8 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNA9 Count of Records Not Accepted n DSYRCNAX QWSBSRNA | X | X | X | X | X |
DSYRCNDA Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDB Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDC Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDD Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDE Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDF Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDG Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDH Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDI Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDP Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDS Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDU Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRCNDX Records Not Desired DB2RECND QWSCSRND | X | X | X | X | X |
DSYRDAA Reads Delayed Tape Volume Contention DSYRDAA QJSTTVC | X | X | X | X | X |
DSYRDON Number of Read Only Commits DSYRDON Q3STRDON | X | X | X | X | X |
DSYRECBS RECOVER BSDS Commands DSYRECBS Q9STCTR3 | X | X | X | X | X |
DSYRECIN RECOVER IN DOUBT Commands DSYRECIN Q9STCTR4 | X | X | X | X | X |
DSYRECNA Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECNB Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECNC Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECND Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECNE Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECNF Records Unsuccessfully Written n DSYRECNX QWSBSRNW | | | | X | X |
DSYRECN1 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECN2 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECN3 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECN4 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECN5 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECN6 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |

Chapter 6: DATA SOURCES 373

6.3 Data Element/Data Source Cross-Reference

DSYRECN7 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |

DSYRECN8 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECN9 Records Unsuccessfully Written n DSYRECNX QWSBSRNW | X | X | X | X | X |
DSYRECWA Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECWB Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECWC Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECWD Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECWE Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECWF Records Successfully Written n DSYRECWX QWSBSRSW | | | | X | X |
DSYRECW1 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW2 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW3 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW4 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW5 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW6 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW7 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW8 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRECW9 Records Successfully Written n DSYRECWX QWSBSRSW | X | X | X | X | X |
DSYRESLV Successful Resolve In Doubts DSYRESLV Q3STRIUR | X | X | X | X | X |
DSYRMID DB2 Resource Manager Identifier DSYRMID QWHSRMID | X | X | X | X | X |
DSYRMSLT Recovery Manager Status Latch DSYRMSLT QVLSLC15 | X | X | X | X | X |
DSYRSACL Reads Satisfied Active Log DSYRSACL QJSTRACT | X | X | X | X | X |
DSYRSARL Reads Satisfied Archive Log DSYRSARL QJSTRARH | X | X | X | X | X |
DSYRSAT Resynchronizations Attempted DSYRSAT QDSTRSAT | X | X | X | X | X |
DSYRSINV Reason Statistics Were Invoked DSYRSINV QWSDRINV | X | X | X | X | X |
DSYRSSU Resynchronizations Succeeded DSYRSSU QDSTRSSU | X | X | X | X | X |
DSYSC1LT Synonym Chain 1 Latch DSYSC1LT QVLSLC17 | X | X | X | X | X |
DSYSC2LT Synonym Chain 2 Latch DSYSC2LT QVLSLC16 | X | X | X | X | X |
DSYSERW Serial Log Write Req - CI Rewrite DSYSERW QJSTSERW | X | X | X | X | X |
DSYSIGN Successful Signons DSYSIGN Q3STSIGN | X | X | X | X | X |
DSYSMHLT Storage Mgr Header Block Latch DSYSMHLT QVLSLC32 | X | X | X | X | X |
DSYSMVLT Storage Mgr Vector Table Latch DSYSMVLT QVLSLC31 | X | X | X | X | X |
DSYSPDBA STOP DATABASE Commands DSYSPDBA Q9STCTR8 | X | X | X | X | X |
DSYSPDB2 STOP DB2 Commands DSYSPDB2 Q9STCTRA | X | X | X | X | X |
DSYSPTRC STOP TRACE Commands DSYSPTRC Q9STCTR9 | X | X | X | X | X |
DSYSRBTM Accumulated SRB Time All ASIDs DSYSRBTM QWSASRBT | X | X | X | X | X |
DSYSRSRS Sync Related SRBs Scheduled DSYSRSRS QVASXSRS | X | X | X | X | X |
DSYSRTCS Sync Related TCBs Scheduled DSYSRTCS QVASXSRT | X | X | X | X | X |
DSYSRTM0 Accumulated SRB Time Addr x DSYSRTMX QWSASRBT | X | X | X | X | X |
DSYSRTM1 Accumulated SRB Time Addr x DSYSRTMX QWSASRBT | X | X | X | X | X |
DSYSRTM2 Accumulated SRB Time Addr x DSYSRTMX QWSASRBT | X | X | X | X | X |
DSYSRTM3 Accumulated SRB Time Addr x DSYSRTMX QWSASRBT | X | X | X | X | X |
DSYSRTM4 Accumulated SRB Time Addr x DSYSRTMX QWSASRBT | X | X | X | X | X |
DSYSRTM5 Accumulated SRB Time Addr x DSYSRTMX QWSASRBT | X | X | X | X | X |
DSYSSICL Number of SSI Calls DSYSSICL Q3STSSSI | X | X | X | X | X |
DSYSSILT Subsystem Interface Latch DSYSSILT QVLSLC11 | X | X | X | X | X |
DSYSTCLT Service Task Controller Latch DSYSTCLT QVLSLC05 | X | X | X | X | X |
DSYSTDBA Start Database Commands DSYSTDBA Q9STCTR5 | X | X | X | X | X |
DSYSTDB2 START DB2 Commands DSYSTDB2 Q9STCTR7 | X | X | X | X | X |
DSYSTOSA Storage Shortage Abends DSYSTOSA QSSTABND | X | X | X | X | X |
DSYSTOSH Storage Shortage DSYSTOSH QSSTCRIT | X | X | X | X | X |
DSYSTTRC START TRACE Commands DSYSTTRC Q9STCTR6 | X | X | X | X | X |
DSYSUSP Physical Suspends DSYSUSP QVASSUSP | X | X | X | X | X |
DSYSUSRS Sync Unrelated SRBs Scheduled DSYSUSRS QVASXSUS | X | X | X | X | X |
DSYSUTCS Sync Unrelated TCBs Scheduled DSYSUTCS QVASXSUT | X | X | X | X | X |
DSYSYNC Successful Synchronizes DSYSYNC Q3STSYNC | X | X | X | X | X |
DSYTCTAD Access Database Commands DSYTCTAD Q9STCTAD | | | | X | X |
DSYTCTM0 Accumulated TCB Time Addr x DSYTCTMX QWSAEJST | X | X | X | X | X |
DSYTCTM1 Accumulated TCB Time Addr x DSYTCTMX QWSAEJST | X | X | X | X | X |
DSYTCTM2 Accumulated TCB Time Addr x DSYTCTMX QWSAEJST | X | X | X | X | X |
DSYTCTM3 Accumulated TCB Time Addr x DSYTCTMX QWSAEJST | X | X | X | X | X |
DSYTCTM4 Accumulated TCB Time Addr x DSYTCTMX QWSAEJST | X | X | X | X | X |
DSYTCTM5 Accumulated TCB Time Addr x DSYTCTMX QWSAEJST | X | X | X | X | X |
DSYTCTRE Start Rlimit Count DSYTCTRE Q9STCTRE | X | X | X | X | X |
DSYTCTRF Stop Rlimit Count DSYTCTRF Q9STCTRF | X | X | X | X | X |
DSYTCTRG Display Rlimit Count DSYTCTRG Q9STCTRG | X | X | X | X | X |
DSYTCTRH Modify Trace Count DSYTCTRH Q9STCTRH | X | X | X | X | X |
DSYTCTRO Display Bufferpool Count DSYTCTRO Q9STCTRO | X | X | X | X | X |
DSYTCTRP Set Archive Count DSYTCTRP Q9STCTRP | X | X | X | X | X |
DSYTCTRQ Display Archive Count DSYTCTRQ Q9STCTRQ | X | X | X | X | X |
DSYTCTRR Reset Indoubt Count DSYTCTRR Q9STCTRR | X | X | X | X | X |
DSYTCTRS Alter Group Buffer Pool Count DSYTCTRS Q9STCTRS | X | X | X | X | X |
DSYTCTRT Display Group Buffer Pool Count DSYTCTRT Q9STCTRT | X | X | X | X | X |
DSYTCTRU Display Procedure Count DSYTCTRU Q9STCTRU | X | X | X | X | X |

374 Analyzer Option for DB2 Guide

6.3 Data Element/Data Source Cross-Reference

DSYTCTRV Start Procedure Count DSYTCTRV Q9STCTRV | X | X | X | X | X |

DSYTCTRW Stop Procedure Count DSYTCTRW Q9STCTRW | X | X | X | X | X |
DSYTCTRX Display Group Count DSYTCTRX Q9STCTRX | X | X | X | X | X |
DSYTCTRY Alter Utility Count DSYTCTRY Q9STCTRY | X | X | X | X | X |
DSYTCTRZ Display Function Count DSYTCTRZ Q9STCTRZ | X | X | X | X | X |
DSYTCTSD Display Profile Commands DSYTCTSD Q9STCTSD | | | | X | X |
DSYTCTSS Start Profile Commands DSYTCTSS Q9STCTSS | | | | X | X |
DSYTCTST Stop Profile Commands DSYTCTST Q9STCTST | | | | X | X |
DSYTCTX0 Start Function Count DSYTCTX0 Q9STCTX0 | X | X | X | X | X |
DSYTCTX1 Stop Function Count DSYTCTX1 Q9STCTX1 | X | X | X | X | X |
DSYTCTX2 Set Log Count DSYTCTX2 Q9STCTX2 | X | X | X | X | X |
DSYTCTX3 Display Log Count DSYTCTX3 Q9STCTX3 | X | X | X | X | X |
DSYTCTX4 Set Sysparm Count DSYTCTX4 Q9STCTX4 | | X | X | X | X |
DSYTCTX5 DISPLAY DDF Commands DSYTCTX5 Q9STCTX5 | | | | X | X |
DSYTERM Successful Terminates DSYTERM Q3STTERM | X | X | X | X | X |
DSYTERMU TERM UTILITY Commands DSYTERMU Q9STCTRB | X | X | X | X | X |
DSYTHRW Log Write Req Sch w/lw Thrsh Reached DSYTHRW QJSTTHRW | X | X | X | X | X |
DSYTSELT Test Shared/Exclusive Latch DSYTSELT QVLSLC01 | X | X | X | X | X |
DSYTTLT Trace Table Latch DSYTTLT QVLSLC30 | X | X | X | X | X |
DSYUNAVL Unavailable Resource DSYUNAVL QVASADUR | X | X | X | X | X |
DSYVPCRT Variable Pools Created DSYVPCRT QSSTGPLV | X | X | X | X | X |
DSYVPDEL Variable Pools Deallocated DSYVPDEL QSSTFPLV | X | X | X | X | X |
DSYVPSGC Variable Pool Segments Contract DSYVPSGC QSSTCONV | X | X | X | X | X |
DSYVPSGE Variable Pool Segments Expanded DSYVPSGE QSSTEXPV | X | X | X | X | X |
DSYVPSGF Variable Pool Segments Freed DSYVPSGF QSSTFREV | X | X | X | X | X |
DSYWFAIA Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAIB Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAIC Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAID Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAIE Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAIF Count of Write Failures n DSYWFAIX QWSBSWF | | | | X | X |
DSYWFAI1 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI2 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI3 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI4 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI5 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI6 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI7 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWFAI8 Count of Write Failures n DSYWFAIX QWSBSWF | X | X | X | X | X |
DSYWUR Read Access Delayed Unavailable DSYWUR QJSTWUR | X | X | X | X | X |
DSYWUWB Wait Unavailable Write Buffer DSYWUWB QJSTWTB | X | X | X | X | X |
DSYWSTR Warm Start Connections DSYWSTR QDSTWSTR | X | X | X | X | X |
----------------------------------------------------------------------------------------------------------------------------------

Chapter 6: DATA SOURCES 375

6.4 Query CP Parallelism Considerations

DB2 can significantly reduce the response time for
processor-intensive queries by initiating multiple parallel
operations when it needs to access data from a table or index
in a table space.

Query CP parallelism enables true multi-tasking by breaking a

large query into many smaller queries running simultaneously
on several processors accessing data in parallel, therefore
reducing the query elapsed time.

The following topics describe the impact of query CP

parallelism on CA MICS processing and data analysis:

1 - Collecting Query CP Parallelism Information

2 - Parallel Tasks Data Analysis

376 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

6.4.1 Collecting Query CP Parallelism Information

The CA MICS Analyzer Option for DB2 collects application
program information from the DB2 SMF type 101 Accounting
Trace Record (IFCID 0003). Applications using CP parallelism
generate multiple records, each one containing a portion of
the total query consumptions.

Parallel tasks, by default, result in additional accounting

trace records because in addition to the record for the
parent query, a record is produced for each parallel child
task. A DB2 parameter, PTASKROL=YES, results in the
consolidation of the child records into a single rollup
record thereby reducing the number of SMF type 101 accounting
trace records to one for the parent and a rollup record for
the parallel child tasks.

The rollup record is written at deallocation time, alone with

the parent task record. For example, if a query generates 6
additional parallel subtasks (with PTASKROL set to YES),
instead of writing 7 SMF records (1 for the parent task and 6
for the child tasks), only two will be created: the parent
task and the child tasks' summary.

Although both records are written at deallocation time and

contain common identification information, the rollup summary
record is not a duplicate of the parent record. Some fields
in the rollup record are identical or already included in the
parent record, but most of the information used for
accounting and performance analysis must be added to parent
task's metrics to get a complete picture. The fields
containing rollup data were described in IBM APARs PQ10864,
PQ22451, and further qualified in PQ41012.

The CA MICS Analyzer Option for DB2 reads and stores

information from both records, allowing a complete
application or user resource accounting, as well as a
detailed DB2 performance analysis of parallel processing.
For more information, see Section 6.4.2, Parallel Tasks Data
Analysis.

Chapter 6: DATA SOURCES 377

6.4 Query CP Parallelism Considerations

6.4.2 Parallel Tasks Data Analysis

When analyzing data involving query parallelism, you have to
consider the end users perception and the internal DB2
parallel monitoring. What appears to be a single execution of
a thread for a user, actually translates into multiple DB2
subtasks which will only provide an overall elapsed time
improvement if their parallelism is well balanced. An
example of a comparison between sequential prefetch and
parallel processing follows:

SEQUENTIAL PROCESSING:
---------------------
With sequential processing, all requests for the various
partitions of a table space (four in our example, P1, P2, P3
and P4) are processed in order, one partition after each
other.

CP Processing: !---------!---------!---------!---------!
P1 reqs P2 reqs P3 reqs P4 reqs

Elapsed Time: !-----------------------------------------!

In the preceding diagram, a single thread performs multiple

requests against the four partitions of a table space. From
both the user and DB2 analyst perspective, the elapsed time
of this thread, commonly referred to as the response time, is
indeed the sum of the times used to perform sequential
requests (plus I/O and wait times not represented here).

PARALLEL PROCESSING:
-------------------
With parallel processing, DB2 can generate several subtasks
(running in parallel), one task per partition performing all
the requests for this specific partition.

CP Processing: !---------!
P1 reqs
!---------!
P2 reqs
!---------!
P3 reqs
!---------!
P4 reqs

Elapsed Time: !-----------!

378 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

In the preceding diagram, the elapsed time of the thread is

greatly reduced, again from both the user and the analyst
perspective. However, complications occur when you switch
from diagrams to actual measured data to establish service
level objectives or monitor CP parallelism activity.

The following topics present more detailed information:

1 - Understanding Elapsed Time CA MICS Metrics

2 - Data Analysis Guidelines

Chapter 6: DATA SOURCES 379

6.4 Query CP Parallelism Considerations

6.4.2.1 Understanding Elapsed Time CA MICS Metrics

In DB2, elapsed time is an important measurement because it

is used for several purposes. From the end users
perspective, it is commonly considered as the response time
of a thread. For the DB2 analyst, it is used in correlation
with other critical metrics, such as CPU time and I/Os for
performance analysis. For query CP parallelism, it is
helpful to know the elapsed times of each individual parallel
task because it may help to determine how parallelism is
balanced (does every subtask have an "equal amount" of the
total work in terms of I/Os CPU, etc.).

The CA MICS files that provide a number of data elements

related to elapsed time measurements are the DB2 User
Activity (DB2DSU) and DB2 Plan Activity (DB2DSP) files.
Accurate reporting on threads elapsed time requires a good
understanding of the content of these variables, as soon as
parallel processing is involved.

The following table will help you with this task. For
detailed information about each listed data element, see its
data dictionary entry.

+-----------------------------------------------------------+
! !
! CONTENTS OF ELAPSED TIME DATA ELEMENTS !
! FOR THE DB2DSU/DB2DSP FILES !
! !
+----------+----------------------+-------------------------+
! Element ! Sequential ! Parallel !
! Name ! Processing ! Processing !
+----------+----------------------+-------------------------+
! fffELPTM ! thread total elapsed ! parent task elapsed !
! fffET2TM ! time ! time only !
+----------+----------------------+-------------------------+
! fffPELPT ! zero ! sum of all child tasks !
! fffPET2T ! ! elapsed times !
+----------+----------------------+-------------------------+
! fffTELPT ! thread total elapsed ! sum of parent and all !
! fffTET2T ! time ! child tasks elps. times !
+----------+----------------------+-------------------------+

For guidelines on how to use these data elements under

different perspectives, see Section 6.4.2.2 Data Analysis
Guidelines, later in this chapter.

380 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

6.4.2.2 Data Analysis Guidelines

Data Analysis is fairly complicated when query CP parallelism

is being used, mainly because there are two different
approaches that are available: User activity reporting and
Fine parallelism monitoring. Although, both are based on the
same raw data, they must be addressed differently. This is
described in the following sections:

1 - Reporting on User Activity

2 - Monitoring Query CP Parallelism

Chapter 6: DATA SOURCES 381

6.4 Query CP Parallelism Considerations

6.4.2.2.1 Reporting on User Activity

DB2 user activity reporting does not generally require access

to the most detailed level of data. So, by default, the CA
MICS User/Plan Activity files (DB2DSU and DB2DSP) are
inactivated in the DETAIL timespan. However, data
summarization in higher levels of granularity must be
accurate and prevent data duplication, overlapping, or
incomplete measurements.

But, how can you determine if any query has been enabled for
CP parallelism (at any point within the reporting interval),
if you don't have access to DB2 system information or
parameters?

If you have activated the DETAIL timespan for the user

activity files and want to report on this granularity level,
each observation can be identified using the Special
Transaction Type Identifier (DB2PTASK) data element.

- A value of 'NONE' indicates that the observation represents

the activity of a sequential query.

- A value of 'ACUMAC' indicates a record representing the DB2

ACCUMACC summarization of two or more DDF or RRSAF queries.

- A value of 'PARENT' indicates that the observation

represents only the activity of the originating task of a
parallel query.

- A value of 'CHILD' indicates that the observation

represents the activity of a single parallel subtask
(individual child records are generated when the DB2 system
parameter PTASKROL is set to NO).

- A value of 'ROLLUP' indicates that the observation

represents the summarized activity of all parallel child
subtasks (summarized child roll-up records are generated
when the DB2 system parameter PTASKROL is set to YES).

If you report on higher levels than DETAIL, then DB2PTASK is

no longer meaningful. However, the database maintains an
accumulated counter containing the number of parallel tasks
created, DSUPCNT. If all the queries are sequential, DSUPCNT
will be equal to zero. On the other hand, if DSUPCNT is
positive, at least one query in the reporting interval used
CP parallelism.

The following guidelines are intended to assist you by using

382 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

correct CA MICS data elements under various circumstances.

1 - Queries That Do Not Use CP Parallelism

2 - Queries Enabled for CP Parallelism

6.4.2.2.1.1 Queries That Do Not Use CP Parallelism

When CP parallelism is not used and the DB2DSU file in the

DAYS timespan has been correctly summarized by DAY, then
producing the following summary daily statistics for a given
user ID is straightforward. However, you will see that it is
more complex with parallelism involved.

The following examples illustrate a few basics of user

reporting, but they can easily be extended to other metrics:

1. Number of threads executed

--------------------------

Element or Computation: DSUNTHRD

Explanation: In DB2, each thread executed generates

its own accounting SMF type 101 record.
When CA MICS processes this data, it sets
the accumulated DSUNTHRD data element to
1 each time it encounters a new record.
Therefore, you only need to print the
value of DSUNTHRD to get the number of
threads executed.

2. Total elapsed time for all threads

----------------------------------

Element or Computation: DSUELPTM or DSUTELPT

Explanation: DSUELPTM and DSUTELPT are only different

when at least one thread (in the period
covered by measurement interval) used CP
parallelism because DSUTELPT would
contain the parent task elapsed time and
all the child subtasks' elapsed times.
This example does not use parallelism and
there are no child subtasks. Therefore,
DSUELPTM contains the same value as
DSUTELPT.

3. Average elapsed time per thread

-------------------------------

Element or Computation: DSUELPTM / DSUNTHRD

Chapter 6: DATA SOURCES 383

6.4 Query CP Parallelism Considerations

or
DSUTELPT / DSUNTHRD

Explanation: Since DSUELPTM and DSUTELPT contain the

accumulated elapsed times for all threads
executed, simply divide one of these
variables by DSUNTHRD to get the average
elapsed time for a single thread.

4. Total elapsed time spent in DB2 for all threads

-----------------------------------------------

Element or Computation: DSUET2TM or DSUTET2T

Explanation: In-DB2 elapsed time is a subset of the

total thread elapsed time. DSUET2TM and
DSUTET2T are only different when at least
one thread (in the period covered by
measurement interval) used CP parallelism
because DSUTET2T would contain the parent
task in-DB2 elapsed time and the child
subtasks in-DB2 elapsed times. This
example does not use parallelism and
there are no child subtasks. Therefore,
DSUET2TM contains the same value as
DSUTET2T.

5. Average in-DB2 elapsed time per thread

--------------------------------------

Element or Computation: DSUET2TM / DSUNTHRD

or
DSUTET2T / DSUNTHRD

Explanation: Since DSUET2TM and DSUTET2T contain the

accumulated in-DB2 elapsed times for all
threads executed, simply divide one of
these variables by DSUNTHRD to get the
average time for a single thread.

6. Total CPU time consumed by all threads

--------------------------------------

Element or Computation: DSUTCBTM or DSUCPUTM

Explanation: DSUCPUTM once contained the sum of TCB

time (DSUTCBTM) and SRB time (DSUSRBTM).
However, since Version 6 Release 1, DB2
does not set SRB times, hence CA MICS no

384 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

longer captures SRB related data

elements. Consequently, DSUTCBTM and
DSUCPUTM contain the same value.

7. Average CPU time per thread

---------------------------

Element or Computation: DSUTCBTM / DSUNTHRD

or
DSUCPUTM / DSUNTHRD

Explanation: Since DSUTCBTM and DSUCPUTM contain the

accumulated CPU times for all threads
executed, simply divide one of these
variables by DSUNTHRD to get the average
time for a single thread.

8. Total in-DB2 CPU time consumed by all threads

---------------------------------------------

Element or Computation: DSUTC2TM

Explanation: In-DB2 CPU time is a subset of the total

thread CPU time. It quantifies the TCB
time actually spent on performing DB2
functions. Simply use this accumulated
data element.

9. Average in-DB2 CPU time per thread

----------------------------------

Element or Computation: DSUTC2TM / DSUNTHRD

Explanation: Since DSUTC2TM contains the accumulated

in-DB2 CPU times for all threads
executed, simply divide one of these
variables by DSUNTHRD to get the average
time for a single thread.

10. Total wait time for all threads

-------------------------------

Element or Computation: DSUIOETM + DSUALLTM

Explanation: DSUIOETM represents the time all threads

waited for I/Os in DB2 and DSUALLTM
represents the time they waited for locks
and latches.

Chapter 6: DATA SOURCES 385

6.4 Query CP Parallelism Considerations

11. Average wait time per thread

----------------------------

Element or Computation: DSUIOETM + DSUALLTM

-------------------
DSUNTHRD

Explanation: Just divide the total wait time by the

number of threads executed.

6.4.2.2.1.2 Queries Enabled For CP Parallelism

As soon as CP parallelism is enabled for a DB2 query,

questions about measurements arise. Do the subtasks' elapsed
times overlap with the originating parent task? If so, how
can we accurately translate the user perception of the
response time? On the other hand, if there is no overlap in
elapsed times and the subtasks are processed concurrently, we
may see CPU times greater than elapsed times. How can we
correlate them?

The following section answers a few common questions about

queries enabled for CP parallelism. Note that the elements
used or the computations performed are similar to the
previous section. This illustrates that you can use the same
variables under different circumstances and still be safe.

For more information on specific performance statistics of

parallel processing, see Section 6.4.2.2.2 Monitoring Query
CP Parallelism.

1. Number of threads executed

--------------------------

Element or Computation: DSUNTHRD

Explanation: When a query is enabled for CP

parallelism, instead of creating a
unique SMF type 101 record for the
complete thread, DB2 generates one record
for the originating parent task and
either one additional rollup record
containing summary information for all
the parallel child subtasks (when the DB2
parameter PTASKROL is set to YES), or one
record per individual parallel subtask
executed (when the DB2 parameter PTASKROL
is set to NO). When CA MICS detects that
a record belongs to a parallel query, it
sets DSUNTHRD to one for the parent

386 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

record and to zero for the subtasks'

records. By taking these measures,
even if DB2 internally created 12
parallel tasks, the query that the user
executed will only count for one thread.
This is very important when you have to
derive average measurements per thread.

2. Total elapsed time for all threads

----------------------------------

Element or Computation: DSUELPTM

Explanation: DSUELPTM is the only element to use to

get the user view of elapsed time when a
query is enabled for CP parallelism. To
avoid overlap between the originating
task (which lasts until the end of all
parallel tasks) and the child subtasks,
DSUELPTM is only populated for the parent
task and is set to zero for all child
subtasks. This reflects the user
response time.

3. Average elapsed time per thread

-------------------------------

Element or Computation: DSUELPTM / DSUNTHRD

Explanation: This computation provides the actual

average thread response time, as
perceived by the user, which should be
much smaller for CP parallelism enabled
queries than for sequential processing
since parallel subtasks are not accounted
for in any of these two data elements.

4. Total elapsed time spent on DB2 for all threads

-----------------------------------------------

Element or Computation: DSUET2TM

Explanation: In DB2 elapsed time is a subset of the

total thread elapsed time. When a query
is enabled for CP parallelism, DSUET2TM
is the only element that can be used to
get the user view of in-DB2 elapsed time.
In order to avoid overlap between the
originating task (which lasts until the

Chapter 6: DATA SOURCES 387

6.4 Query CP Parallelism Considerations

end of all parallel tasks) and the child

subtasks, DSUET2TM is only populated for
the parent task and is set to zero for
all child subtasks.

5. Average in-DB2 elapsed time per thread

--------------------------------------

Element or Computation: DSUET2TM / DSUNTHRD

Explanation: Since DSUET2TM contains the accumulated

in-DB2 elapsed times for all threads
executed, simply divide one of these
variables by DSUNTHRD to get the average
time for a single thread. Again, only
parent tasks in-DB2 times are accounted
for in this derivation.

6. Total CPU time consumed by all threads

--------------------------------------

Element or Computation: DSUTCBTM or DSUCPUTM

Explanation: In versions prior to Version 6 Release 1,

DSUCPUTM contained the sum of TCB time
(DSUTCBTM) and SRB time (DSUSRBTM).
However, since Version 6 Release 1, DB2
does not set SRB times, hence CA MICS no
longer captures related data elements.
Consequently, DSUTCBTM and DSUCPUTM
contain the same value.

These data elements contain the sum of

the parent task plus all child subtasks'
TCB times; therefore, they can be greater
than DSUELPTM (the elapsed time), which
only accounts for parent tasks. This
should not cause a problem because these
statistics serve two different purposes.
Elapsed time is a service level indicator
and TCB time is a charging element that
must account for the total CPU used by
all tasks and subtasks executed.

If you need to correlate elapsed time to

TCB time, you will use other CA MICS data
elements including both the parent and
child tasks' elapsed times, like
DSUTELPT, Total Elapsed Time.

388 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

7. Average CPU time per thread

---------------------------

Element or Computation: DSUTCBTM / DSUNTHRD

or
DSUCPUTM / DSUNTHRD

Explanation: Since DSUTCBTM and DSUCPUTM contain the

accumulated CPU times for all threads
executed, simply divide one of these
variables by DSUNTHRD to get the average
time for a single thread.

8. Total in DB2 CPU time consumed by all threads

---------------------------------------------

Element or Computation: DSUTC2TM

Explanation: In-DB2 CPU time is a subset of the total

thread CPU time. It quantifies the TCB
time actually spent on performing DB2
functions. Simply use this accumulated
data element.

For more information on in-DB2 TCB times,

as it relates to parallelism, see item 6.

9. Average in-DB2 CPU time per thread

----------------------------------

Element or Computation: DSUTC2TM / DSUNTHRD

Explanation: Since DSUTC2TM contains the accumulated

in-DB2 CPU times for all threads
executed, simply divide one of these
variables by DSUNTHRD to get the average
time for a single thread.

10. Total wait time for all threads

-------------------------------

Element or Computation: DSUIOETM + DSUALLTM

Explanation: DSUIOETM represents the time all threads

waited for I/Os in DB2, while DSUALLTM
represents the time they waited for locks
and latches. These data elements contain
the sum of the parent task, plus all

Chapter 6: DATA SOURCES 389

6.4 Query CP Parallelism Considerations

child subtasks' wait times because there

is no overlap between the SMF type 101
records for TCB time and most other
accounting measurements.

11. Average wait time per thread

----------------------------

Element or Computation: DSUIOETM + DSUALLTM

-------------------
DSUNTHRD

Explanation: Just divide the total wait time by the

number of threads executed.

390 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

6.4.2.2.2 Monitoring Query CP Parallelism

In addition to the user reporting guidelines provided in the

previous section, the analyst has to address the internal DB2
perspective of parallel processing. This includes several
tasks like identifying potentially good candidates for query
CP parallelism, monitoring balance, and overall performance
of parallel subtasks executions.

1 - Identify Potential Candidates for CP Parallelism

2 - Analyzing CP Parallelism Performance
3 - Parallelism Reduction and Degradation

6.4.2.2.2.1 Identify Potential Candidates for CP Parallelism

Knowing the profile of your DB2 sequential queries before

enabling them for CP parallelism is important because only
processor-intensive queries will benefit from concurrent
executions.

The type of DB2 queries that consume large amounts of

processor time include:

- Queries involving large volumes of data scans, but whose

selection criteria only return a few rows.

- Queries accessing long data rows with a very low rows per
page ratio.

- Queries containing aggregate column functions (like AVG,

SUM, etc.), which generally return a single result after
scanning multiple rows.

- Queries involving large data sorts.

The commonly used criteria to determine if a query is

CP-intensive is the ratio of the total TCB time to the total
elapsed time. The following computation, from the DB2 User
Activity file (DB2DSU) provides this ratio:

CP_RATIO = ( DSUTCBTM / DSUELPTM ) * 100

If CP_RATIO is less than 30%, the query will not take

advantage of CP parallelism.

If CP_RATIO is between 30% and 70%, the query is

well-balanced and enabling it for CP parallelism may
slightly improve its performance.

If CP_RATIO is greater than 70%, then the query is

Chapter 6: DATA SOURCES 391

6.4 Query CP Parallelism Considerations

processor-intensive and is a good candidate for CP

parallelism.

6.4.2.2.2.2 Analyzing CP Parallelism Performance

In this section, you are presented with a list of questions

and explanations that should be taken into account when
optimizing a DB2 query after enabling parallelism:

1. Did the overall performance of the query improve?

-------------------------------------------------

Element or Computation: DSUELPTM vs. DSUTELPT

Explanation: The difference between these two data

elements is that DSUELPTM represents the
elapsed time of only the parent task,
which is the actual query response time
while DSUTELPT is the accumulation of all
parallel tasks, the parent plus all child
subtasks. Thus, DSUTELPT is equivalent
to the total query elapsed time, when
executed sequentially.

If DSUELPTM is significantly lower than

DSUTELPT, the goal is achieved.

2. How many parallel tasks were generated for this query?

------------------------------------------------------

Element or Computation: DSUNTHRD + DSUPCNT

Explanation: When a query is enabled for CP

parallelism, instead of creating a unique
SMF type 101 record for the complete
thread, DB2 generates one record for the
originating parent task and either one
additional rollup record containing
summary information for all the parallel
child subtasks (when the DB2 parameter
PTASKROL is set to YES) or one record per
individual parallel subtask executed
(when the DB2 parameter PTASKROL is set
to NO). When CA MICS detects that a
record belongs to a parallel query, it
sets these two variables for the parent
record: DSUNTHRD is set to one and
DSUPCNT is set to the number of parallel
subtasks generated. For subtasks
record(s), they are both forced to zero.

392 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

For example, if an originating task

creates 8 parallel subtasks, the total
number of tasks executed for the query
will be 9 (1 in DSUNTHRD and 8 in
DSUPCNT). This is very important when
you want to derive average measurements
per task.

3. What is the average TCB time per parallel task?

-----------------------------------------------

Element or Computation: DSUTCBTM

------------------
DSUNTHRD + DSUPCNT

Explanation: DSUTCBTM contains the sum of all parallel

tasks TCB time. This includes the parent
task and all child subtasks.

4. What is the average elapsed time per parallel task?

---------------------------------------------------

Element or Computation: DSUTELPT

------------------
DSUNTHRD + DSUPCNT

Explanation: You must use DSUTELPT, which is the only

data element containing the accumulated
elapsed times of all parallel tasks,
including the parent task, and not
DSUELPTM, which only represents the
elapsed time of the parent task.

5. Is parallelism well balanced across all subtasks?

-------------------------------------------------

Element or Computation: DB2PTASK

Analyze in detail how each parallel subtask performs

compared to its counterpart. This task should be
carefully planned and should only be performed for a
short-term, as it may have severe implications on your
data center operations and CA MICS daily processes.

By default, the PTASKROL value of the DB2 system

parameter is YES, which means DB2 rolls up all child
tasks information into a single SMF type 101 record.
If you want task level information, you will have to
change the PTASKROL value to NO, which instructs DB2 to

Chapter 6: DATA SOURCES 393

6.4 Query CP Parallelism Considerations

write a SMF type 101 record for each individual

parallel subtask. This action may flood your
installation's SMF data sets and lead to severe
operational problems.

Once the SMF data is created, you will have to store it

in the CA MICS database. This can be done by activating
the DB2DSU file in the DETAIL timespan (by default, the
DB2DSU file is inactive). Again, this may lead to disk
space problems during your CA MICS daily processing.
However, you can use the TAPEDSU facility to create the
detail file on tape, rather than disk.

Data element DB2PTASK, Special Transaction Type

Identifier, allows you to determine if the observation
represents the activity of the parent task or of the
child subtask activity. For more information, see the
DB2PTASK data dictionary entry.

6.4.2.2.2.3 Parallelism Reduction and Degradation

In DB2, the optimal number of parallel operations or tasks

used to access data in order to achieve minimum elapsed time
is initially determined at bind time, and later adjusted when
the query is executed. If the query cannot be run at the
planned degree, as determined by DB2, parallelism will
execute at a reduced degree or will degrade to sequential
operations.

This section summarizes the reasons for parallelism reduction

and degradation, and provides you with some related CA MICS
data elements, when available, that you may find useful for
monitoring.

The easiest way to verify if parallelism ran at the planned

degree is to compare the values of the following data
elements:

o DSUTOGRP: Parallel Groups Executed

o DSUNOGRP: Parallel Groups Exec Planned Degree

A parallel group is a set of parallel operations. A single

query can have several parallel groups, but each group within
the query is identified by its own unique number.

If the number of parallel groups executed at the planned

degree is not equal to the total number of parallel groups
executed, then parallelism reduction or/and degradation
occurred at some point for one of the following reasons:

394 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

o Lack of Virtual Buffer Pool Space Availability

----------------------------------------------

Element(s) : DSUDGBUF, DSURDGRP, DSURPOP2, DSUSKIP

Explanation: Non-zero values for any of these data

elements is an indicator of a storage
shortage or contention on the buffer pool
that affected parallelism execution. You
may want to increase the current buffer
pool using the ALTER BUFFERPOOL
statement, or assign table spaces
accessed by this query to a different
buffer pool using the ALTER TABLESPACE
statement.

o Runtime Host Variable Values

-----------------------------

Element(s) : Not Available

Explanation: In an application program, a variable

that is referenced by embedded SQL
statements can determine the qualifying
partitions of a table for a given query.
In this case, determination of optimum
parallelism degree is deferred until
runtime, when the host variable value is
known.

o Updateable Cursor
----------------

Element(s) : DSUDGCUR

Explanation: A non-zero value in this data element

indicates that DB2 determined, at
runtime, that an ambiguous cursor was
updateable, and that the parallel groups
fell back to sequential mode. This
situation can occur when a query is bound
with the CURRENDATA(YES) option, and if
DB2 cannot tell if the cursor is
read-only. To ensure DB2 will consider
parallelism for ambiguous cursors, you
can choose the CURRENDATA(NO) bind
option. However, it is best to always
prevent such a situation, by indicating

Chapter 6: DATA SOURCES 395

6.4 Query CP Parallelism Considerations

when a cursor is read-only on the DECLARE

CURSOR statement.

o Lack of Proper Hardware and Software Support

--------------------------------------------

Element(s) : DSUDGESA, DSUEGENC

Explanation: If the hardware sort facility is not

available at runtime, and a sort merge
join is needed, DSUDGESA will have a non-
zero value. Similarly, if enclave
services are unavailable, DSUEGENC will
have a non-zero value. Enclave services
are required for distributed requests,
because the parallel tasks run under an
enclave SRB, unlike non-distributed
requests, for which parallel tasks run
under a client SRB.

o Changes in the Configuration of Online Processors

-------------------------------------------------

Element(s) : DSURPOP1

Explanation: DB2 can reduce the parallelism degree if

there are fewer online central processors
(or, for sysplex parallelism, DB2
members) available at runtime than at
bind time. DSURPOP1 has to be used as a
potential problem indicator only if
parallelism did not run at the planned
degree, because a non-zero value does not
necessarily mean that a reduction
occurred. If the change in configuration
results in an increase of the processing
power, DB2 can increase the parallel
degree to take best advantage of this
updated configuration.

o Disabled by the Resource Limit Facility (RLF)

---------------------------------------------

Element(s) : DSURLFDP

Explanation: This data element provides the number of

threads for which query parallelism was
disabled by the RLF.

396 Analyzer Option for DB2 Guide

6.4 Query CP Parallelism Considerations

o Execution Limited to a Single DB2 Subsystem

------------------------------------------

Element(s) : DSUORNO, DSUORR, DSUPGDTT

Explanation: These data elements indicate that

parallel groups executed on a single DB2
subsystem due to one of the following
reasons:

- For DSUORNO: Either the COORDINATOR

subsystem parameter was set to YES at
bind time, but the parameter is set to
NO at runtime; or the plan or package
was bound on a DB2 with the COORDINATOR
subsystem parameter set to YES, but the
program is being run on a different DB2
that has the COORDINATOR value set to
NO.

- For DSUORR: The plan or package was

bound with an isolation value of
REPEATABLE-READ or READ-STABILITY.

- For DSUPGDTT: Sysplex parallelism was

downgraded to CP parallelism for
parallel groups because they referenced
a user-defined function (UDF), and a
declared temporary table was detected
at runtime.

Chapter 6: DATA SOURCES 397

6.5 ACCUMACC Roll-up Records

Beginning with DB2 Version 8.1, the ACCUMACC zPARM can be
used to instruct DB2 to summarize accounting records for DDF
and RRSAF transaction records prior to writing to SMF.

To use this feature, an ACCUMACC threshold parameter is

specified in the range from 2 to 65535. This threshold
represents the number of records that will be summarized
before a roll-up record is written. The roll-up is done for
each end-user identifier, defined as the concatenation of
end-user ID, end-user transaction name, and end-user
workstation name.

The data element names representing these key data elements

are found in the DB2 User Activity (DB2DSU) file:

- DSUEUTX End User Transaction Name

- DSUEUWN End User Workstation Name
- DSUEUID End USERID

A related DB2 zPARM, ACCUMUID, permits customization of the

end-user fields used for summarization. The following
combinations are permitted:

- End user ID, transaction name, and workstation name.

- End user transaction name.
- End user workstation name.
- End user ID and transaction name.
- End user ID and workstation name.
- End user transaction name and workstation name.

ACCUMACC and the CA MICS DB2 Analyzer

-------------------------------------
External access to mainframe based DB2 databases can result
in high volumes of DDF and RRSAF transactions. ACCUMACC
offers relief via lower volumes of SMF data records, but with
some loss of information.

o Character Fields
----------------
Character fields cannot be summarized. In some cases, IBM
stores the character field from the last accounting record
summarized. In other cases, character fields are left
empty in the SMF data records.

o Numeric Fields
--------------
Most numeric fields representing counts are summarized

398 Analyzer Option for DB2 Guide

6.5 ACCUMACC Roll-up Records

correctly in the ACCUMACC roll-up records. Fields that

represent timestamp values and certain bit-map fields,
however, cannot be accurately summarized.

In cases where data is unreliable or unavailable, it must be

interpreted differently due to ACCUMACC summarization.
CA MICS data dictionary element descriptions provide the
information necessary to understand the data element values
represented. In cases where numeric data metrics are
unavailable with ACCUMACC summarization, CA MICS sets the
values to missing (.).

CA MICS file observations created from ACCUMACC roll-up

records are easily identified. Data element Special
Transaction Type Identifier (DB2PTASK) is set to 'ACUMAC'
when the source record was an ACCUMACC roll-up record.

The following sections explain the impact of ACCUMACC on

several CA MICS DB2 Analyzer files. Included is information
to assist you in understanding how well ACCUMACC is reducing
SMF record volume.

1 - ACCUMACC and DB2 Region Level Files

2 - ACCUMACC and Transaction Level Files

Chapter 6: DATA SOURCES 399

6.5 ACCUMACC Roll-up Records

6.5.1 ACCUMACC and DB2 Region Level Files

The DB2 System Activity (DB2DSY) file is built from
interval records generated at the DB2 region level.
Included in the file are four data elements that count
the number of DDF and RRSAF ACCUMACC records written for
the region over the time interval represented by the
CA MICS file observation:

DSYACFTQ - ACCUMACC Count: Failure to Qualify

DSYACSTR - ACCUMACC Count: Storage Exceeded
DSYACSTL - ACCUMACC Count: Staleness
DSYACUTR - ACCUMACC Count: Threshold Exceeded

The first data element, DSYACFTQ, quantifies the number of

DDF and RRSAF transaction records that were written
unsummarized because one or more of the summarization key
fields was null.

The other three data elements quantify the number of roll-up

records written. The most common reason that a roll-up
record is written is because the ACCUMACC threshold value was
exceeded (DSYACUTR).

The other two reasons, staleness and storage exceeded, mean

that a decision was made to write the roll-up record prior to
summarizing the amount of records specified by the ACCUMACC
threshold value.

By analyzing DSYACUTR and knowing your ACCUMACC threshold

value, you can determine SMF record reduction by DB2 region.

For example, if your ACCUMACC threshold is 10 and DSYACUTR

has a value of 1000 in a CA MICS observation, you know that
without ACCUMACC, the region would have written 10,000 DDF
and RRSAF transaction records, but instead, they were
consolidated into 1000 roll-up records, a reduction of 9,000
SMF records over the time period represented by the DB2DSY
file observation.

400 Analyzer Option for DB2 Guide

6.5 ACCUMACC Roll-up Records

6.5.2 ACCUMACC and Transaction Level Files

FILE: DB2 User DDF Activity (DB2DDU)

The DB2 User DDF Activity (DB2DDU) file will not contain
observations for ACCUMACC roll-up records. In DB2 Version 8,
the DB2 DSNDQLAC DDF metrics are not rolled-up for DDF
transactions. Normally, the SMF type 101 subtype 0
transaction accounting record for DDF activity contains a
record segment containing the DDF metrics defined in the DB2
DSNDQLAC macro. This SMF record yields a DB2DSU file user
activity record and a corresponding DB2DDU file DDF activity
record in your CA MICS database. With ACCUMACC, you will no
longer have DB2DDU file observations for rolled-up DDF
transaction records.

FILES: DB2 User Activity (DB2DSU)

DB2 Plan Activity (DB2DSP)

The DB2 User Activity (DB2DSU) and DB2 Plan Activity (DB2DSP)
files are built from SMF type 101 subtype 0 transaction
accounting records. At the DETAIL timespan, these two files
are virtually identical. The difference in these files is
found in the DAYS and higher timespans. The DB2 Account Code
data elements are used as summarization keys in the DB2DSU
file, allowing the file to be summarized by user related
metrics. The DB2DSP file, on the other hand, includes DB2
Plan Name (DB2PLAN) and Connection Identifier (DB2CONN) in
the summarization keys providing for a more technical
summarization of transaction activity.

In the DETAIL timespan, you can identify DB2DSU and DB2DSP

file observations representing ACCUMACC roll-up records by
examining the value of the Special Transaction Type
Identifier (DB2PTASK) data element. DB2PTASK='ACUMAC' for
ACCUMACC roll-up records.

Data elements in these files are adjusted as described below

for observations created from ACCUMACC roll-up records (note
that fff represents both DSP and DSU):

o Modified data elements:

fffNTHRD - Count of Threads Initiated

For non-ACCUMACC records, fffNTHRD is set to 1 in each

DETAIL timespan DB2fff file observation. For ACCUMACC
roll-up records, however, fffNTHRD is set to the value of
field QWACPCNT, which contains the number of individual

Chapter 6: DATA SOURCES 401

6.5 ACCUMACC Roll-up Records

accounting records summarized in the roll-up record.

o Unavailable data elements:

fffBGTCB - Beginning TCB Timer

fffENTCB - Ending TCB Timer
fffENTEX - No. of Entry/Exit Events Processed
DB2NETID - Network Identifier

For ACCUMACC records, the raw data fields from which these
data elements are unavailable or redefined. The CA MICS
DB2 Analyzer sets these elements to missing values for
ACCUMACC roll-up records.

o Data elements reflecting the value of the last accounting

record to be rolled up:

DB2AUTH - Authorization Identifier

DB2CORR - Correlation Identifier
DB2CONN - Connection Identifier
DB2PLAN - Plan Name
DB2OPID - Original Operator ID
fffCATYP - Connecting System Type Code
fffCICLU - CICS Terminal LU Name
fffCICNT - CICS Network Identifier
fffCICUW - CICS Logical Unit of Work ID

These data elements are all included, unmodified, in the

DB2DSU file observations for ACCUMACC roll-up records.
Note that the value represented may not reflect the value
encountered in all records summarized in the roll-up. Per
IBM, the value stored in the SMF roll-up record represents
the value encountered in the last record rolled-up.

The following data elements are provided to assist in

understanding ACCUMACC activity:

fffACNT - No. ACCUMACC Records Encountered

fffACUTR - ACCUMACC Count: Threshold Exceeded
fffACSTR - ACCUMACC Count: Storage Exceeded
fffACSTL - ACCUMACC Count: Staleness

fffACNT is set to 1 for observations created from ACCUMACC

roll-up records. In the same observation, one of the other
three data elements are set to 1 based on the reason that
the roll-up record was written.

fffNATHD - Count of ACCUMACC Roll-up Threads

402 Analyzer Option for DB2 Guide

6.5 ACCUMACC Roll-up Records

fffNATHD is set equal to the number of individual

accounting records rolled-up in an ACCUMACC roll-up record.
By dividing fffNATHD by fffACNT, you can determine the
number of individual records rolled-up, on average, into
ACCUMACC roll-up records.

FILE: DB2 Package/DBRM Activity (DB2DPP)

The DB2 Package/DBRM Activity (DB2DPP) file is built from SMF

type 101 subtype 1 package records. This file is the most
impacted by ACCUMACC because a major summarization key data
element in this file, Package/DBRM Name (DB2PKNM) is not
available.

For DDF and RRSAF transaction records rolled-up with

ACCUMACC, the rolled-up SMF type 101 subtype 1 record
contains a single package segment where all package activity
for all rolled-up transactions is summarized. The raw data
fields that comprise Package/DBRM Name are set to binary
zeros.

The primary purpose of the DB2DPP file is to permit analysis

of DB2 package activity, by Package/DBRM Name. With ACCUMACC
summarization masking package name, DB2DPP file observations
for rolled-up DDF and RRSAF transactions are of dubious
value. In addition, there is no indication of the number of
individual package segments represented by the accumulated
numeric data elements.

Rather than storing binary zeros in the DB2PKNM data element,

the DB2 Analyzer stores the value 'ACCUMACC ROLLUP RECORD' in
observations created from ACCUMACC roll-up records.

In the DETAIL timespan, you can identify DB2DPP file

observations representing ACCUMACC roll-up records by
examining the value of the Special Transaction Type
Identifier (DB2PTASK) data element, DB2PTASK='ACUMAC' for
ACCUMACC roll-up records. Additionally, the DB2PKNM data
element will always contain 'ACCUMACC ROLLUP RECORD'.

Data elements in the DB2DPP file are adjusted as described

below for observations created from ACCUMACC roll-up records:

o Unavailable data elements:

DPPAAFG - Activity Flag

DPPAANM - Name of Activity
DPPASCH - Nested Activity Schema Name
DPPBEGSC - Package/DBRM Beginning Store Clock

Chapter 6: DATA SOURCES 403

6.5 ACCUMACC Roll-up Records

DPPBGTCB - Package/DBRM TCB Time At Entry To DB2

DPPDBRM - Number of DBRMs
DPPELRTM - Elapsed Time for Most Recent Execution
DPPENDSC - Package/DBRM Ending Store Clock
DPPENTCB - Package/DBRM TCB Time At Exit From DB2
DPPENTEX - Entry/Exit Events Processed
DPPINSP - No. Packages Loaded by Stored Proc.
DPPNSTP - Number of Native SQL Procedure
DPPPACK - Number of Packages
DPPSPNS - No. Stored Procedures Executed
DPPSQLC - SQL Stmts Issued
DPPSUAC - No. Successful Authorization Checks
DPPTCRTM - TCB Time for Most Recent Execution
DPPUDNU - No. User-Defined Functions Scheduled

For ACCUMACC records, the raw data fields from which these
data elements are derived are unavailable or redefined.
The CA MICS DB2 Analyzer sets these elements to missing
values for ACCUMACC roll-up records.

404 Analyzer Option for DB2 Guide

6.6 CA MICS and CA SMF Director Interface

CA SMF Director is an SMF management product with special
features that can be used to optimize CA MICS processing. CA
SMF Director can significantly reduce operational overhead by
creating content specific files while simultaneously creating
an SMF historical archive during the SMF dump process.

CA MICS DAILY and incremental update operational jobs can be

modified to take advantage of this product, provided your
site is licensed for and has CA SMF Director installed in
your environment.

CA SMF Director provides functions that extract SMF data at

dump time or from previously archived SMF files. These
functions eliminate the need for any external utilities used
for preprocessing of the SMF dump tape for data extraction
prior to execution of the DAILY job. In addition, the DAYSMF
step of the CA MICS DAILY job may no longer be required. For
details on how to eliminate the DAYSMF step, see section
5.10, Removing the DAYSMF Step from the DAILY Job of the PIOM
guide.

CA SMF Director SPLIT and EXTRACT statement operands provide

a way for you to create content specific files to meet your
requirements. The main functions of the operands include the
ability to:

o Select system identifiers

o Select or exclude SMF record types and subtypes
o Use conditional statements for granularity
o Define time boundaries for SMF data

To use the SPLIT function of CA SMF Director for CA MICS

components, one or more SPLIT statements must be coded. The
split is performed at SMF dump time and the files can then be
used as input to products in one or more units. The same
results can be accomplished by using the EXTRACT function of
CA SMF Director, which retrieves data from the previously
created history files. For more information on the SPLIT and
EXTRACT functions, see the CA SMF Director User Guide
at http://ca.com/support.

Chapter 6: DATA SOURCES 405

6.6 CA MICS and CA SMF Director Interface

A complete set of SMF record types and subtypes, for each

CA MICS component that inputs SMF data, can be found in
sharedprefix.MICS.PARMS(cccSMFD), where ccc is the
three-character product identifier. Each PARMS member lists
the available SMF record types and subtypes for that
component in a format suitable for use in CA SMF Director
SPLIT and EXTRACT statements. These members are provided as
examples only; the CA SMF Director JCL should not reference
sharedprefix.MICS.PARMS(cccSMFD).

406 Analyzer Option for DB2 Guide

Chapter 7: PARAMETERS
This chapter shows you how to complete the required
definitions for installing the CA MICS Analyzer Option for
DB2. You must understand your data center and its needs, then
translate that understanding into CA MICS parameters. This
chapter will lead you through the parameter specifications
required for installing the DB2 Analyzer. You must make a
number of policy decisions, fill out several worksheets, and
translate the worksheet entries into the corresponding
parameter library member entries.

Note that the focus of this chapter is on the considerations

that are unique to the DB2 Analyzer. Chapters 2 and 3 of the
PIOM document the mechanics of the CA MICS installation
process and include checklists that describe each
installation step.

If you have a question at any time, contact Technical Support

at http://ca.com/support.

This section contains the following topics:

7.1 Environmental Considerations (see page 408)
7.2 Complex Level Parameters (see page 409)
7.3 Unit Level Parameters (see page 421)

Chapter 7: PARAMETERS 407

7.1 Environmental Considerations

Before coding the installation parameters, you need to know
about the DB2 environment at your installation. To do so, we
suggest that you perform the following:

o Examine existing user groups, account codes, and job

control information used by DB2. This information
helps you code appropriate values for the account code
parameters of the DB2 Analyzer.

o Review the default setting of the installation

parameters provided by the DB2 Analyzer to determine
their applicability to your environment.

o Review current CA MICS parameter specifications:

- Review data base unit specifications to determine

which unit or units should include DB2 data.
Normally this will be the same data base unit that
the SMF/RMF component are install.

- Review the SYSID parameter to determine whether it

correlates to the DB2 data. Your site's SYSID
definition is located in the prefix.MICS.PARMS data
set associated with each data base unit.

- Review the CA MICS ZONE parameter to ensure that it

reflects the variations in DB2 data. This parameter
is located in the prefix.MICS.PARMS data set
associated with each data base unit.

- Examine existing accounting standards for other

CA MICS products, if applicable, to ensure that
CA MICS Accounting and Chargeback aggregates
information consistently.

408 Analyzer Option for DB2 Guide

7.2 Complex Level Parameters

This section shows you how to specify the complex level
parameters that define the processing of the CA MICS Analyzer
Option for DB2. The definitions apply to all CA MICS
database units in which the DB2 Analyzer is installed.

The following topics are presented:

1 - DB2GENIN Customization
2 - Account Code Structure (DB2ACCT)
3 - Account Code Derivation Routine (DB2ACRT)

Chapter 7: PARAMETERS 409

7.2 Complex Level Parameters

7.2.1 DB2GENIN Customization

This section discusses customizing DB2GENIN using the OPTION
and COMPRESS statements.

The OPTION Statement

--------------------
To define DB2 Analyzer file processing options, code the
OPTION statement, specifying one term from each pair of
keywords.

OPTION <NODDF/DDF> <NOSERV/SERV> <NOPKG/PKG> <NOSHARE/SHARE>

where:

NODDF/DDF controls whether the Analyzer processes

data for the distributed data facility (DDF)
information contained in the DB2 SMF records.
The default is DDF.

When NODDF is set, the following CA MICS

files are deactivated:

DB2DDY--System DDF Statistics

DB2_SH--System DDF Suspend
DB2DDU--DB2 User DDF Activity
DB2DDP--DB2 Plan DDF Activity

and all DDF-related elements, identified

with cluster code 10, are turned off in
the following files:

DB2DSY--DB2 System Activity

DB2DSD--DB2 Database Activity
DB2DSU--DB2 User Activity
DB2DSP--DB2 Plan Activity

The NODDF option overrides FILE statement

specifications for the DDF files and NAME
statement specifications for the DDF elements in
the other CA MICS DB2 files. See the notes
below for more information about coordinating
the DDF and non-DDF CA MICS files.

NOSERV/SERV controls whether the Analyzer populates

elements whose data comes from fields that IBM
has labeled serviceability fields.

410 Analyzer Option for DB2 Guide

7.2 Complex Level Parameters

Serviceability fields are used at IBM's request

for problem determination. The only information
provided about these fields comes from the
DSECTs (dummy control sections).

The default is NOSERV, which saves space in the

CA MICS database by not populating the elements
that come from serviceability fields.

Note: The sequence/summary elements for the

following pairs of files should match. If you
tailor the sequence/summary elements in the
Primary File, you should tailor the Associated
DDF File the same way.

Primary Associated Activity

File DDF File Captured
------- ---------- --------
DB2DSY DB2DDY System
DB2DSU DB2DDU User
DB2DSP DB2DDP Plan

Note: The DB2DSP and DB2DDP Plan Activity files

are required for Plan Performance reporting.
These plan activity files are generated by
renaming, at the WORK file level, the DB2DSU and
DB2DDU User Activity file elements.

Because CA MICS WORK files are built using KEEP

lists at the DETAIL timespan, you must ensure
that the DB2DSP and DB2DDP elements are defined
at the DETAIL timespan in the associated DB2DSU
and DB2DDU files.

The DB2DSU and DB2DDU files do NOT have to be

activated at the DETAIL timespan to define
elements in the KEEP list for the DETAIL
timespan. See chapter 4 of the System
Modification Guide for detailed information
about activating CA MICS elements at various
timespans.

NOPKG/PKG controls whether the Analyzer processes

data for packages and database request modules
contained in the SMF type 101 record. The
default, NOPKG, deactivates the DB2DPP file
(Package/DBRM Activity File) and turns off all
related elements, identified with cluster code
13.

Chapter 7: PARAMETERS 411

7.2 Complex Level Parameters

NOSHARE/ controls whether the Analyzer processes

SHARE data sharing information. The default, NOSHARE,
turns off elements with cluster code 12 in the
following files:

DB2DSY--DB2 System Activity

DB2DSD--DB2 Database Activity
DB2DSU--DB2 User Activity
DB2DSP--DB2 Plan Activity

NOBUFFER/ controls whether the Analyzer processes

BUFFER Expanded Buffer Pool files. The default,
NOBUFFER, turns off the following files:

DBPDSB--DB2 Buffer Pool Activity

DBPDBU--DB2 User Buffer Pool Activity
DBPDBP--DB2 Plan Buffer Pool Activity

NOBPELEMENT/ controls whether unique data elements for

BPELEMENT buffer pools 0, 1, 2, and 80 are kept in the
DB2DSU, DB2DBU, and DB2DSD files. If
NOBPELEMENT is set, only totals for buffer pool
elements are kept. BPELEMENT is the default.

Each of the above keywords controls the activation of data

elements that are associated with a cluster code. The
following table summarizes the cluster codes used in the DB2
Analyzer.

DB2 Analyzer Cluster Codes

Code Keyword Description

---- --------- --------------------------
10 DDF Distributed Database
Facility
11 SERV Serviceability Fields
12 SHARE Data Sharing
13 PKG Package and DBRM
14 BUFFER Buffer Files
15 BPELEMENT Individual Buffer 0 - 3
Elements

The COMPRESS Statement

----------------------

412 Analyzer Option for DB2 Guide

7.2 Complex Level Parameters

The SAS system gives you the option to create variable-length

or fixed-length observations in a SAS data set.
Variable-length observations differ from fixed-length
observations in that the former are usually smaller because
the blank spaces used to pad fixed-length observations are
removed.

You instruct SAS to create variable length observations by

specifying the COMPRESS= option. SAS data set compression
can be implemented for individual data sets or across the
entire SAS System. Compression is controlled by the
placement of the COMPRESS= option on either an OPTIONS
statement (for the entire system) or on a DATA statement (for
an individual data set named on the DATA statement).

For more information about the COMPRESS= option, see the SAS
Institute documentation.

Do not compress the DB2 Analyzer's interim work files:

DB2_DS, the System Activity Suspend File

DB2_DD, the Database Activity Suspend File
DB2_SH, the System DDF Suspend File
DB2_DB, the System DBP Suspend File

Chapter 7: PARAMETERS 413

7.2 Complex Level Parameters

7.2.2 Account Code Structure (DB2ACCT)

In CA MICS, data about DB2 activity is stored by account
codes in the DB2 User Activity (DB2DSU) and DB2 User DDF
Activity (DB2DDU) files.

The parameters you specify in

sharedprefix.MICS.PARMS(DB2ACCT) define the number of account
code fields that will be carried in these files, the length
of each field, and the SAS long names that are associated
with each field. Once the fields are defined, you provide a
routine that assigns them values (see Section 7.2.3).

Preparing to Define Account Codes

---------------------------------

Each data center has its own method for associating its DB2
work with the responsible users, projects, or departments.
Before defining account codes, it is important that you
investigate your data center's accounting standards to do the
following:

o Identify the current organizational coding system (for

example, a cost center coding system identifying the
division, department, project, and employee) and determine
how the account codes are specified.

o Identify the naming conventions for physical and logical

entities such as database name, tablespace name, user ID
name, and connected subsystem ID.

o Identify if, and how, the codes are verified to ensure that
they correspond to valid definitions. You should always
validate account codes and assign unidentified or invalid
account codes to a special data center overhead account
code. This approach provides you with two benefits:

- It groups all invalid codes under the same category and

therefore requires less DASD space.

- It enables you to easily determine how much of this

overhead activity is taking place.

Consider the following suggestions in determining the number

of account codes required to meet your data center's
reporting and analysis needs:

o Account codes are part of the summarization keys for the

414 Analyzer Option for DB2 Guide

7.2 Complex Level Parameters

files that support them. As such, at least one record is

generated for each combination of values. Therefore, the
higher the number of account codes, the more DASD space the
database will require. But, at the same time, a higher
number of account codes also supports data analysis at a
greater level of detail.

o If you anticipate needing to expand the account code

structure in the future, establish an extra account code
now to eliminate the need to retrofit the database later to
add the new account code.

Defining Account Codes

----------------------

Account code field names are in the form DB2ACTx, where

x is the sequential number of the account code field. If
three fields are defined, they will be DB2ACT1, DB2ACT2, and
DB2ACT3. In your accounting structure, these might identify
the authorization ID, correlation ID, and connection method.

The sequential number is called the account code field

"level" number. You can have a maximum of nine levels. A
sample account code structure is provided in
sharedprefix.MICS.PARMS(DB2ACCT).

Figure 7-1 provides a worksheet for collecting the data. The

worksheet should be filled in as follows:

o Code a separate statement for each account code level.

o Blank statements are permitted. Comments are coded by

beginning the statement with an '*'.

o Account levels are provided in order, starting with 1.

o Up to nine levels are permitted. No gaps are permitted

between the numbers.

o The statement format is freeform but positional. The

statement format is either:

level length 'descriptive title'

level (optional)mask length 'descriptive title'

Chapter 7: PARAMETERS 415

7.2 Complex Level Parameters

where:

level = The level of importance of each account code,

with level 1 being the most important and the
highest level number being the least important.
The levels are defined sequentially starting
with 1. You can define up to nine levels. This
parameter is required.

mask = An optional parameter that deactivates account

codes in specified timespans. Specifying a
timespan mask requires coding T(......) as the
second parameter in a statement, where each .
represents a file timespan, in the order of
DETAIL, DAYS, WEEKS, MONTHS, YEARS, and TABLES.
For each timespan, specify a Y to indicate that
the account code is active or an N to indicate
that it is inactive.

If you do not code the mask, it has a default

value of T(YYYYYY).

The following rules apply if you code the mask:

o DETAIL must always be Y. Account codes may

not be deactivated in this timespan.

o If DAYS is N, then WEEKS, MONTHS, and YEARS

must also be N. If the account code is
inactive in the DAYS timespan, it cannot be
active in higher timespans.

o If MONTHS is N, then YEARS must be N. If the

account code is inactive in the MONTHS
timespan, it cannot be active in the YEARS
timespan.

length = The length of the account code. The length may

range from 1 to 30. This parameter is required.

descriptive The title that describes the account code. The

title = length of the title is 1 to 40 characters. The
title is embedded in quotes ('). This is a
required parameter.

A sample DB2ACCT member with four levels is illustrated

below:

1 T(YYYYYY) 8 'AUTHORIZATION ID'

416 Analyzer Option for DB2 Guide

7.2 Complex Level Parameters

2 T(YYYYYY) 12 'CORRELATION ID'

3 T(YYYYYY) 8 'CONNECTION ID'
4 T(YYYYYY) 4 'DISTRIBUTED THREAD TYPE

+--------------------------------------------------------------------------+
| INSTALLATION PREPARATION WORKSHEET: DB2 Account Code Level Definition |
| |
| PARMS Library Member is DB2ACCT |
+--------------------------------------------------------------------------+
| ACCOUNT (Optional) |
| CODE LEVEL timespan FIELD |
| (1-9) MASK LENGTH ACCOUNT CODE LEVEL TITLE |
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
| _ T(______) __ '________________________________________'|
| |
+--------------------------------------------------------------------------+

Figure 7-1. DB2 Account Code Level Definition Worksheet

Chapter 7: PARAMETERS 417

7.2 Complex Level Parameters

7.2.2.1 Add or Modify DB2 Account Structure

You can add, delete, or change the definitions of the DB2

account codes. However, changing the account code structure
affects not only the content of the CA MICS database, but
also your ability to produce consistent reports, as the DB2
files will be summarized differently afterwards. Your
CA MICS Accounting and Chargeback files will also be
affected. Therefore, you should implement the new account
code structure when it will produce the least impact on your
CA MICS system, such as during the testing phase or at the
beginning of an accounting month.

Use the following checklist to alter the DB2 account code

structure (DB2ACCT):

___ 1. Save a copy of sharedprefix.MICS.PARMS members

DB2ACCT and DB2ACRT (if necessary) in
sharedprefix.MICS.LOCALMOD.CNTL for recovery
purposes.

___ 2. Modify sharedprefix.MICS.PARMS(DB2ACCT) to add,

delete, or modify an existing account code
definition.

___ 3. Submit sharedprefix.MICS.CNTL(DB2CGEN).

___ 4. Modify the DB2 Account Code Derivation Routine in

sharedprefix.MICS.PARMS(DB2ACRT) to derive the
account codes. Changes to this member take effect
immediately, as this code is included in the next
DAILY execution.

___ 5. Retrofit the 00 cycles of the DB2DSU and DB2DDU files

in the WEEKS, MONTHS, and YEARS (if active) timespans
if you added or deleted an account code level or
shortened the account code length. See Section 6.3.2
of the System Modification Guide for a sample
retrofit routine.

418 Analyzer Option for DB2 Guide

7.2 Complex Level Parameters

7.2.3 Account Code Derivation Routine (DB2ACRT)

After you have defined DB2ACCT for the number of account
codes to be carried in your DB2 files, code the Account Code
Derivation Routine (DB2ACRT) in sharedprefix.MICS.PARMS.
DB2ACRT is a SAS routine that derives the account code data
elements during the DAY065 step. For example, if you have
defined four account codes in DB2ACCT, then your DB2ACRT exit
must contain SAS code to derive the data elements DB2ACT1,
DB2ACT2, DB2ACT3, and DB2ACT4.

The DB2ACRT code is included directly into the DAY065 step.

If you modify the DB2ACRT code, the changes will take effect
during the next DAILY update run.

You are responsible for testing the accuracy of the exit

routine; however, the Analyzer provides a sample exit
routine. The worksheet for coding the DB2ACRT exit is shown
in Figure 7-2.

A sample DB2ACRT member is shown below:

/***********************************************************/
/* */
/* DB2ACT1 - Retain Auth. ID identifying requestor. */
/* */
/* DB2ACT2 - Retain transaction, "*BATCH*" or Correlation */
/* ID. Correlation ID for batch requests will contain */
/* JES job name so "*BATCH*" is used to group all batch */
/* interface requests. Retaining each unique batch job */
/* name in DB2ACT2 would increase the size of each */
/* CA MICS cycle of data. */
/* */
/* DB2ACT3 - Retain interface connection method used to */
/* access DB2. */
/* */
/* DB2ACT4 - Retain DB2 thread type. */
/* */
/* NOTE: This sample exit assumes that the VTAM APPLID's */
/* assigned to CICS and IMS regions all begin with the */
/* characters "CIC" and "IMS" respectively. The SAS */
/* code must be changed if a different naming */
/* convention is used. */

/* Identify requesting user from Authorization ID */

DB2ACT1=DB2AUTH;

/* Identify requestor for specific Connection IDs */

Chapter 7: PARAMETERS 419

7.2 Complex Level Parameters

SELECT(DB2CONN);
/* Identify batch interface as being used */
WHEN ('BATCH') DB2ACT2 = '*BATCH*';
WHEN ('UTILITY') DB2ACT2 = '*BATCH*';
WHEN ('DB2') DB2ACT2 = '*BATCH*';
WHEN ('DB2CALL') DB2ACT2 = '*BATCH*';
/* Identify requestor for all other Connection IDs */
OTHERWISE DO;
/* Retain the CICS trancode from the correlation ID */
IF DB2CONN =: 'CIC' THEN DB2ACT2 = SUBSTR(DB2CORR,5,4);
/* Retain the IMS PSBNAME from the correlation ID */
ELSE IF DB2CONN =: 'IMS' THEN DB2ACT2 = SUBSTR(DB2CORR,5,8);
/* Otherwise retain the entire correlation ID */
ELSE DB2ACT2 = DB2CORR;
END;
END;

/* Retain Connection ID for reference */

DB2ACT3=DB2CONN;

/* Retain Thread Type for DB2 remote (DDF) accesses */

DB2ACT4=DB2THDTY;

+--------------------------------------------------------------------------+
| INSTALLATION PREPARATION WORKSHEET: DB2 Account Code Routine Definition |
| |
| PARMS Library Member is DB2ACRT |
+--------------------------------------------------------------------------+
| * VALIDATE ACCOUNT CODES |
| |
| IF { account data is valid } THEN DO; |
| |
| * POPULATE ACCOUNT CODE FIELDS |
| |
| DB2ACT1=field source 1 ; |
| DB2ACTn=field source n ; |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| END; |
| ELSE DO; |
| |
| * ASSIGN TO OVERHEAD ACCOUNT |
| |
| DB2ACT1='overhead category' ; |
| DB2ACTn='overhead category' ; |

420 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

| ____________________________________________________________________ |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| |
| END; |
+--------------------------------------------------------------------------+

Figure 7-2. DB2 Account Code Routine Definition Worksheet

7.3 Unit Level Parameters

This section shows you how to define the unit level
parameters for the DB2 Analyzer. These parameter definitions
exist for each CA MICS database unit in which the DB2
Analyzer is installed.

The following topics are presented:

1 - DB2 Processing Options (DB2OPS)

2 - INPUTRDR and INPUTDB2 PARMS Members
3 - Database Space Modeling (DBMODEL)

Chapter 7: PARAMETERS 421

7.3 Unit Level Parameters

7.3.1 DB2 Processing Options (DB2OPS)

The DB2OPS member of prefix.MICS.PARMS contains statements
for the DB2 Analyzer's processing options.

Numerous optional statements are supported that allow you to

customize the analyzer's behavior to meet your data center
requirements.

Operational statements are stored in the prefix.MICS.PARMS

cccOPS member, where ccc is the component identifier, and are
incorporated into the CA MICS system by running the
prefix.MICS.CNTL(cccPGEN) job.

*************************************************************
* *
* NOTE: CHANGES to prefix.MICS.PARMS(cccOPS) members *
* REQUIRE EXECUTION of prefix.MICS.CNTL(cccPGEN) *
* to take effect. *
* *
* In addition, any change to parameters that *
* impact the DAILY operational job JCL such as, *
* *
* o changing RESTART NO to RESTART YES, *
* *
* o WORK parameter changes when RESTART NO is in *
* effect, *
* *
* o Specifying TAPEfff (if this product supports *
* a DETAIL level TAPE option), *
* *
* o or changes to prefix.MICS.PARMS(INPUTccc), *
* *
* will require regeneration of the DAILY job by *
* executing prefix.MICS.CNTL(JCLGEND) or by *
* specifying DAILY in prefix.MICS.PARMS(JCLGENU) *
* and executing prefix.MICS.CNTL(JCLGENU). *
* *
* Refer to the checklist (if provided) for updating *
* cccOPS parameters and running required generation *
* jobs. *
*************************************************************
The following sections explain each of the optional
statements specified in prefix.MICS.PARMS(DB2OPS).

WORK, MULTWORK, and NOMULT Statements

Internal Step RESTART Statements
Incremental Update Statements
DETAIL Tape Processing

422 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.1 WORK, MULTWORK, and NOMULT Statements

WORK
----

This statement is optional. It enables sites experiencing

either SAS WORK space allocation problems or out of work
space conditions during DAYnnn or INCRnnn (where nnn is the
job step number), daily or incremental update processing, to
allocate multiple WORK files.

You can allocate multiple WORK files for use during the daily
and/or incremental update job step. The maximum number of
WORK files you can allocate varies by product. These
additional work files are used in conjunction with the single
work data set allocated by default using the JCLDEF
parameters WORKUNIT and WORKSPACE.

Because the individual space allocation requirement for each

WORK file is typically much smaller, it is more likely to be
satisfied.

To take advantage of multiple WORK files support, edit

prefix.MICS.PARMS(cccOPS) and insert a WORK statement as
shown below:

WORK n data_set_allocation_parameters

where n is the number of WORK data sets

Note: The default is three (3).

The maximum is thirty five (35).

data_set_allocation_parameters is one or more data

set allocation parameters (for example, STORCLAS or
SPACE) separated by spaces.

You can also specify the WORK parameter as the following:

WORK n XXX pppp ssss

where:

n is the number of WORK data sets

XXX is TRK or CYL
pppp is the primary allocation
ssss is the secondary allocation

Note: When allocating any number of SAS WORK data sets, be

Chapter 7: PARAMETERS 423

7.3 Unit Level Parameters

aware that one additional SAS WORK data set is automatically

allocated to facilitate sorting. For example, if you
allocate six SAS WORK data sets, you will actually get seven.

If you omit the data_set_allocation_parameters or the WORK

parameter, the work data sets are allocated according to the
values you specified for the WORKUNIT and WORKSPACE
parameters in prefix.MICS.PARMS(JCLDEF). Use the
data_set_allocation_parameters to override this default,
either to alter the space allocation or to use System Managed
Storage (SMS) parameters to control data set placement and
characteristics.

Note: If you allocate insufficient space for the WORK data

sets, DAYnnn and/or INCRnnn processing will fail and can only
be restarted from the beginning.

Note: If internal step restart is active, you can override

the WORK data set allocation parameters at execution-time
using the //PARMOVRD facility. For more information about
execution-time override of dynamic data set allocation
parameters, see the PIOM, section 2.3.6.

Specify data set allocation parameters, separated by blanks,

according to SAS LIBNAME statement syntax. If you need
multiple lines, repeat the WORK keyword on the continuation
line.

WORK accepts the engine/host options documented in the SAS

Companion for the z/OS environment, including STORCLAS, UNIT,
SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and VOLSER.

Important! Do not specify the DISP parameter.

Example 1:

WORK n STORCLAS=MICSTEMP SPACE=(XXX,(pppp,ssss),RLSE)

where:

n - is the number of WORK data sets.

STORCLAS - specifies a storage class for a new data set.
The name can have up to 8 characters.
SPACE - specifies how much disk space to provide for
a new data set being allocated.
XXX - is TRK or CYL.
pppp - is the primary allocation.
ssss - is the secondary allocation.
RLSE - specifies that free-space should be released

424 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

when the data set is closed.

Example 2:

WORK n XXX pppp ssss

where:

n - is the number of WORK data sets.

XXX - is TRK or CYL.
pppp - is the primary allocation.
ssss - is the secondary allocation.

Example 3 (multiple lines):

WORK n STORCLAS=MICSTEMP UNIT=SYSDA

WORK SPACE=(xxxx,(pppp,ssss),,,ROUND))

where:

n - is the number of WORK data sets.

STORCLAS - specifies a storage class for a new data set.
The name can have up to eight characters.
UNIT - specifies the generic unit for a new data set.
The name can have up to eight characters.
SPACE - specifies how much disk space to provide for
a new data set being allocated.
XXX - is TRK or CYL.
pppp - is the primary allocation.
ssss - is the secondary allocation.

Note: Since there is some performance impact when using

multiple WORK files, you should specify the minimum number of
WORK data sets to meet your work space requirements. As a
start, try incrementing the number gradually beginning from
the default.

WORK Considerations
--------------------

How Much Space Should You Allocate?

o First Time Implementation of Multiple Work Files

If this is the first time you are implementing multiple

work files for this product in this unit, review
prefix.MICS.PARMS(JCLDEF) and find the WORKSPACE
parameter. It will resemble this sample statement:

Chapter 7: PARAMETERS 425

7.3 Unit Level Parameters

WORKSPACE TRK 500 250

The value shows the current SAS WORK space allocation for
the unit as a single data set. It also serves as the
default value used in the unit's DAYnnn daily update
(and/or INCRnnn incremental update) step unless you
provide a WORK parameter.

To achieve the equivalent work space allocation of

WORKSPACE TRK 500 250 using multiple WORK data sets that
will collectively share the work space requirements of
the daily and/or incremental update step, you could code
either one of these:

WORK 2 SPACE=(TRK,(250,125))

WORK 5 SPACE=(TRK,(100,50))

To determine the total work space, multiply the number of

WORK files (n) by the primary (pppp) and secondary (ssss)
values specified.

Note: To simplify the example, only the SPACE parameter

is shown above. You can follow either with data set
allocation parameters like UNIT or STORCLAS as required
for your site.

o Adjusting Allocation for Existing Multiple WORK Files

If you have previously implemented multiple WORK file

support for this product in this unit, and you want to
change either the number of WORK files or the space
allocations, examine prefix.MICS.PARMS(cccOPS) and find
the existing WORK statement.

- If the existing WORK statement only specifies the

number of WORK files but does not contain space
allocation information as shown below:

WORK 5

Then each of the multiple WORK files is allocated

using the values from the WORKSPACE parameter of
prefix.MICS.PARMS(JCLDEF), as described earlier under
First Time Implementation of Multiple Work Files.

To increase workspace, you can increase the number of

WORK files (for example, change WORK 5 to WORK 6,7,8,

426 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

or 9), increase the space allocation in the WORKSPACE

parameter, or do both.

To decrease workspace, you can decrease the number of

WORK files (for example, change WORK 5 to WORK 4,3,2,
or 1), decrease the space allocation in the WORKSPACE
parameter, or do both.

You can also elect to explicitly specify the multiple

WORK file space allocation by adding the space
allocation values directly to the WORK statement. This
will remove the link to the prefix.MICS.PARMS(JCLDEF)
WORKSPACE parameter for multiple WORK file space
allocation. This is recommended as it serves to
clearly document, in one place, how multiple WORK files
are allocated.

- If the existing WORK statement does include space

allocation as shown in the examples below:

WORK 5 TRK 200 100

WORK 5 SPACE=(TRK,(200,100)) STORCLAS=MICSTEMP

Simply change the values to meet your needs.

If you need more work space, you can increase the

number of WORK files (for example, change WORK 5 to
WORK 6,7,8, or 9), increase the space allocation (for
example, change TRK 200 100 to TRK 250 120), or do
both.

To decrease work space, you can decrease the number of

WORK files (for example, change WORK 5 to WORK 4,3,2,
or 1), decrease the space allocation (for example,
change TRK 200 100 to TRK 150 80), or do both.

Note: If internal step restart is NOT active (RESTART NO)

and you change the WORK parameter, you must:

o Run cccPGEN
o Run JCLGENU for DAILY (to regenerate DAILY) and, if
incremental update is enabled, INCRccc

When internal step restart is active, (RESTART YES), then,

when you change WORK and run cccPGEN, changes take effect
immediately. There is no need to run JCLGENU.

Chapter 7: PARAMETERS 427

7.3 Unit Level Parameters

SASWORK
-------

This statement is optional.

The WORK DD statement in the CA MICS procedures allocates

a temporary data set where SAS keeps its temporary data
files and other items that SAS uses during processing of
the current job.

By default, the space allocated is defined in the member

prefix.MICS.PARMS(JCLDEF) with the WORKSPACE and WORKUNIT
parameters, then generated into all the JCL procedures for
a given unit.

With the SASWORK statement you have the option to override

this unit-wide definition to specify the space allocation
individually for the current step.

The format of the SASWORK statement is:

SASWORK data_set_allocation_parameters

where data_set_allocation_parameters is one or more data set

allocation parameters (for example, STORCLAS or SPACE)
separated by spaces.

You can also specify the SASWORK parameter as the following:

SASWORK XXX pppp ssss

where:

XXX is TRK or CYL

pppp is the primary allocation
ssss is the secondary allocation

If you omit the data_set_allocation_parameters or the SASWORK

statement, the WORK data set is allocated according to the
values you specified for the WORKUNIT and WORKSPACE
parameters in prefix.MICS.PARMS(JCLDEF). Use the
data_set_allocation_parameters to override this default,
either to alter the space allocation or to use System Managed
Storage (SMS) parameters to control data set placement and
characteristics.

Specify data set allocation parameters, separated by blanks,

428 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

according to SAS LIBNAME statement syntax. If you need

multiple lines, repeat the SASWORK keyword on the
continuation line.

Example:

SASWORK STORCLAS=MICSTEMP SPACE=(XXX,(pppp,ssss))

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to 8 characters.
SPACE - specifies how much disk space to provide for
a new data set being allocated.
XXX - is TRK or CYL.
pppp - is the primary allocation.
ssss - is the secondary allocation.

Note: If you change the SASWORK parameter, you must:

o Run cccPGEN
o Run JCLGENU for DAILY (to regenerate DAILY) and, if
incremental update is enabled, INCRccc

MULTWORK|NOMULT fff fff ... fff

-------------------------------

Since multiple work files usage impacts performance, this

product provides these optional parameters so you can
restrict multiple work files usage to only those files having
excessive space requirements.

Note: You can only use one of these optional parameters with
the WORK statement, NOT both.

The MULTWORK parameter restricts the use of multiple WORK

files to ONLY those listed after the MULTWORK keyword.

MULTWORK fff fff ... fff

where fff is the unique three character identifier

If you need multiple lines, repeat the MULTWORK on the

continuation line.

The NOMULT parameter forces the use of multiple WORK files

for all files EXCEPT those specified after the NOMULT
keyword.

Chapter 7: PARAMETERS 429

7.3 Unit Level Parameters

NOMULT fff fff ... fff

where fff is the unique three character identifier

If you need multiple lines, repeat the NOMULT on the

continuation line.

The default is as follows if neither MULTWORK nor NOMULT

parameters are specified:

MULTWORK DBU DDU DPP DSU DPX

The following files are eligible for multiple WORK support:

DB2 DB2 Information Area

DDU DB2 User DDF Activity File

DPP DB2 Package/DBRM Activity File
DSU DB2 User Activity File
DPX DB2 Package/DBRM Activity Work File

DBP DB2 Buffer Pool Area

DBU DB2 User Buffer Pool Activity

The following section discusses changing the WORK option:

1 - Change the Number of Work Files

430 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.1.1 Change the Number of WORK Files

To change the number of work files used in the CA MICS DB2

Analyzer processing in DAY065, follow the checklist provided
below for each unit:

****************************************************
* *
* CHANGE NUMBER OF WORK FILES *
* *
****************************************************

___ 1. Update the WORK statement in

prefix.MICS.PARMS(cccOPS), where (ccc) is the
component identifier, to specify the number of work
data sets required. Below is an example:

WORK n STORCLAS=MICSTEMP SPACE=(XXX,(pppp,ssss))

where:

n - is the number of WORK data sets.

STORCLAS - specifies a storage class for a new data
set. The name can have up to eight
characters.
SPACE - specifies how much disk space to provide
for a new data set being allocated.
XXX - is TRK or CYL.
pppp - is the primary allocation.
ssss - is the secondary allocation.

You should specify the minimum number of WORK data

sets to meet your work space requirements. As a
start, try incrementing the number gradually
beginning from the default.

___ 2. If this is the first time you are implementing

multiple work files for this product, then continue
with Step 2. If you are just changing the number
currently in use, or simply the space definitions,
then proceed to Step 3 of this checklist.

Browse sharedprefix.MICS.PROTOLIB(DYcccnnn) and

sharedprefix.MICS.PROTOLIB(cccINCR), where (nnn) is
the job step number and (ccc) is the product ID for
this product, checking for the presence of the WORK
symbolic on the EXEC statement to determine if you
have previously modified this product to increase the
allocation of SAS WORK space.

Chapter 7: PARAMETERS 431

7.3 Unit Level Parameters

___ 2a. If you find a WORK symbolic, simply divide the

primary and secondary allocation values from the WORK
symbolic by the number of work files specified above
(value of n on the WORK statement coded in Step 1).

Coding the resulting values will yield the same

aggregate space allocation you have been using with a
single WORK file. To double your available WORK
space, carry out the division, double the results and
use the values in the WORK definition above.

___ 2b. If you did not find a WORK symbolic in PROTOLIB,

examine prefix.MICS.PARMS(JCLDEF) for each CA MICS
unit containing this product. Find the WORKSPACE
keyword. The space allocation specified is used for
a single SAS WORK file. Perform the same division as
described in the previous paragraph to determine the
quantity that will yield equivalent total allocation
with multiple WORK files. Then adjust the values
upward to meet your needs.

___ 3. Submit the job in prefix.MICS.CNTL(cccPGEN).

___ 4. If you specified RESTART YES in the product's cccOPS,

you are done. Otherwise, you must do Steps 5, 6, and
7.

___ 5. Edit prefix.MICS.PARMS(JCLGENU) so that it contains a

single line that reads:

DAILY

or, if incremental update is enabled for this product

in this unit database, specify:

DAILY INCRccc

where ccc is the product ID.

___ 6. Submit the job in prefix.MICS.CNTL(JCLGENU). Ensure

that there are no error messages in MICSLOG or
SYSTSPRT, that the MICSLOG contains the normal
termination message, BAS10999I, and that the job
completes with a condition code of zero.

___ 7. The following operational job(s) have changed:

DAILY

432 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

INCRccc (if incremental update is enabled)

If your site has implemented the operational CA MICS

processes in a scheduling product, the JCL may have
to be refreshed in that product. See the scheduling
product's administrator for the exact processes
involved in updating that product's representation of
the CA MICS jobs.

Chapter 7: PARAMETERS 433

7.3 Unit Level Parameters

7.3.1.2 Internal Step RESTART Statements

RESTART YES/NO
--------------

This statement is optional. Specify this to activate

internal step restart for this product's DAILY and/or INCRccc
database update job steps:

RESTART YES

If you do not specify or enable the RESTART parameter, then

this option defaults to the following and internal step
restart is disabled:

RESTART NO

*************************************************************
* *
* Note: Changing the RESTART parameter (either from NO *
* to YES or from YES to NO) requires regeneration *
* of the DAILY operational job by executing *
* prefix.MICS.CNTL(JCLGEND) or by specifying *
* DAILY in prefix.MICS.PARMS(JCLGENU) and *
* executing prefix.MICS.CNTL(JCLGENU). *
* *
* If incremental update is active for this product, *
* you must also regenerate the INCRccc job. *
* *
*************************************************************

Internal step restart can significantly reduce time and

resource usage to recover from daily and/or incremental
update processing failures. CA MICS uses a
checkpoint/restart technique.

o When internal step restart is activated, the database

update job step "checkpoints" (or saves) intermediate
results (work file contents) and the operational
environment at the end of each processing phase.

o Then, if required, the database update step can resume

execution at the beginning of the processing phase in
which the failure occurred.

o Restart is accomplished by restoring the operational

environment from the last checkpoint, bypassing completed

434 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

processing phases, and resuming execution using

intermediate results (work files) from the last
checkpoint.

Note: When you activate internal step restart (RESTART YES),

the following optional restart parameters are enabled.
These parameters have no effect if restart is disabled
(RESTART NO). For more details, see the individual
parameter descriptions later in this section.

o RESTARTCKPT data_set_allocation_parameters

o RESTARTWORK data_set_allocation_parameters

o DYNAMWAIT minutes

Processing Phases:
------------------

This product employs three database update processing phases,

followed by the two common roll-up phases.

Phase Description
------------- ------------------------------------------

FORMAT Read raw input data, convert to SAS

format, and output to intermediate work
files.

DELTA Perform required delta processing on the

DDY, DSB, DSD, and DSY files.

DBUPDATE Sort intermediate work file contents,

eliminate duplicate input data, merge data
across optional multiple work files,
enhance data content, and create the new
DETAIL cycle.

DYSUM Summarize DETAIL data to create new DAYS

cycles and to update current week-to-date
and month-to-date cycles.

DYAGE Cutover new database cycles to production

and "age" existing cycles.

RESTART Considerations
----------------------

Chapter 7: PARAMETERS 435

7.3 Unit Level Parameters

o Overhead

Enabling internal step restart adds some overhead to the

database update job step -- the cost of taking
checkpoints and managing saved materials. Since this
overhead is relatively constant and independent of input
data volume, you may find that costs outweigh potential
savings when input data volume is low, for example in a
test unit. For high volume, production units, internal
step restart support overhead should be a minor portion
of total resource usage.

o Cataloged Work Files

When internal step restart is enabled, the SAS work data

set, internal step restart control data set, and multiple
work file data sets are allocated and cataloged with
permanent dataset names so they will be retained for use
in restart if the step abends. These data sets are
deleted when the step completes successfully.

Prior to enabling internal step restart support, these

data sets were probably allocated on system "scratch"
space with a temporary, system assigned data set names.
If your installation standards do not allow "permanent"
data sets on DASD volumes used for temporary work space,
you may need to use the WORK, RESTARTCKPT, and
RESTARTWORK parameters to direct the internal step
restart data sets to a generic unit or storage class that
allows cataloged data sets.

o Dynamic Allocation

When internal step restart is active, dynamic allocation

is employed for the work data sets. If your installation
restricts dynamic allocation of large, cataloged data
sets, you may need to use the WORK, RESTARTCKPT, and
RESTARTWORK parameters to direct work data set allocation
to a generic unit or storage class where dynamic
allocation is allowed.

o Data Set Names

The SAS work data set, internal step restart control data
set, and multiple work file data sets are allocated and
cataloged according to the standard CA MICS unit database
data set name conventions. The default DDNAME and data
set names are:

436 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

o SAS work data set,

//cccXWORK DD DSN=prefix.MICS.cccXWORK,.....

o Internal step restart control data set,

//cccXCKPT DD DSN=prefix.MICS.cccXCKPT,.....

o Multiple work file data sets,

//WORKnn DD DSN=prefix.MICS.cccWRKnn,.....

Since these data sets conform to the same data set name
conventions as your existing CA MICS data sets, there
should be few, if any, data set name related allocation
issues. However, it is possible to override the data set
names if required. Please contact CA MICS Product
Support for assistance if you must alter data set names.

RESTARTCKPT
-----------

This statement is optional. Specify the following to

override default data set allocation parameters for the
internal step restart checkpoint data set:

RESTARTCKPT data_set_allocation_parameters

Note: RESTARTCKPT is ignored when you specify RESTART NO.

The internal step restart checkpoint data set (or cccXCKPT

data set) contains processing status, control, and SAS
environmental information for internal step restart
processing checkpoints. This includes a copy of the SAS WORK
format and macro catalogs, current macro variable values, and
a description of work files that may be needed to restart
DAYnnn processing.

By default, the cccXCKPT data set is allocated according to

the values you specified for the WORKUNIT and WORKSPACE
parameters in prefix.MICS.PARMS(JCLDEF). Specify RESTARTCKPT
to override this default, either to alter the space
allocation or to use System Managed Storage (SMS) parameters
to control data set placement and characteristics.

Note: If you allocate insufficient space for the cccXCKPT

data set, DAYnnn processing will fail and can only be
restarted from the beginning.

Note: You can override the RESTARTCKPT data set allocation

Chapter 7: PARAMETERS 437

7.3 Unit Level Parameters

parameters at execution-time using the //PARMOVRD facility.

For more information about execution-time override of dynamic
data set allocation parameters, see the PIOM, section 2.3.6.

Specify data set allocation parameters, separated by blanks,

according to SAS LIBNAME statement syntax. If you need
multiple lines, repeat the RESTARTCKPT keyword on the
continuation line.

RESTARTCKPT accepts the engine/host options documented in the

SAS Companion for the z/OS Environment, including STORCLAS,
UNIT, SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and VOLSER.

Important! DO NOT SPECIFY THE DISP PARAMETER.

Example 1:

RESTARTCKPT STORCLAS=MICSTEMP SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated, where:

xxxx is TRK, CYL, or blklen

pp is the primary allocation
ss is the secondary allocation

and ROUND specifies that the allocated space be

"rounded" to a cylinder boundary when the unit
specified was a block length. ROUND is ignored
with the TRK or CYL options.

Example 2 (multiple lines):

RESTARTCKPT STORCLAS=MICSTEMP UNIT=SYSDA

RESTARTCKPT SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

UNIT - specifies the generic unit for a new data set.

The name can have up to eight characters.

438 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

SPACE - specifies how much disk space to provide for

a new data set being allocated.

RESTARTWORK
-----------

This statement is optional. Specify the following to

override default data set allocation parameters for the
internal step restart WORK data set:

RESTARTWORK data_set_allocation_parameters

Note: RESTARTWORK is ignored when you specify RESTART NO.

The internal step restart WORK data set (or cccXWORK data
set) contains the intermediate work files that are not
enabled to multiple work file support, including those files
you may have specified on the optional NOMULT statement.

By default, the cccXWORK data set is allocated according to

the values you specified for the WORKUNIT and WORKSPACE
parameters in prefix.MICS.PARMS(JCLDEF). Specify RESTARTWORK
to override this default, either to alter the space
allocation or to use System Managed Storage (SMS) parameters
to control data set placement and characteristics.

Note: If you allocate insufficient space for the cccXWORK

data set, DAYnnn processing will fail and can only be
restarted from the beginning.

Note: You can override the RESTARTWORK data set allocation

parameters at execution-time using the //PARMOVRD facility.
For more information about execution-time override of dynamic
data set allocation parameters, see the PIOM, section 2.3.6.

Specify data set allocation parameters, separated by blanks,

according to SAS LIBNAME statement syntax. If you need
multiple lines, repeat the RESTARTWORK keyword on the
continuation line.

RESTARTWORK accepts the engine/host options documented in

"SAS Companion for the z/OS Environment", including STORCLAS,
UNIT, SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and VOLSER.

Important! DO NOT SPECIFY THE DISP PARAMETER.

Example 1:

Chapter 7: PARAMETERS 439

7.3 Unit Level Parameters

RESTARTWORK STORCLAS=MICSTEMP SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated, where:

xxxx is TRK, CYL, or blklen

pp is the primary allocation
ss is the secondary allocation

and ROUND specifies that the allocated space be

"rounded" to a cylinder boundary when the unit
specified was a block length. ROUND is ignored
with the TRK or CYL options.

Example 2 (multiple lines):

RESTARTWORK STORCLAS=MICSTEMP UNIT=SYSDA

RESTARTWORK SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

UNIT - specifies the generic unit for a new data set.

The name can have up to 8 characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated.

The following section discusses enabling this option:

1 - Enable Internal Step Restart

440 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.2.1 Enable Internal Step Restart

To enable the internal step restart in the CA MICS DB2

Analyzer, follow the checklist provided below for each unit:

****************************************************
* *
* ENABLE INTERNAL STEP RESTART *
* *
****************************************************

___ 1. Edit prefix.MICS.PARMS(cccOPS), where (ccc) is the

component identifier, and specify:

RESTART YES

For additional information on related topic, review

the documentation for this product on WORK,
RESTARTWORK, and RESTARTCKPT parameters to override
default data set allocation parameters.

___ 2. Submit the job in prefix.MICS.CNTL(cccPGEN).

___ 3. Edit prefix.MICS.PARMS(JCLGENU) so that it contains a

single line that reads:

DAILY

or, if incremental update is enabled for this product

in this unit database, specify:

DAILY INCRccc

where ccc is the product ID.

___ 4. Submit the job in prefix.MICS.CNTL(JCLGENU). Ensure

that there are no error messages in MICSLOG or
SYSTSPRT, that the MICSLOG contains the normal
termination message, BAS10999I, and that the job
completes with a condition code of zero.

___ 5. The following operational job(s) have changed:

DAILY

INCRccc (if incremental update is enabled)

If your site has implemented the operational CA MICS

processes in a scheduling product, the JCL may have

Chapter 7: PARAMETERS 441

7.3 Unit Level Parameters

to be refreshed in that product. See the scheduling

product's administrator for the exact processes
involved in updating that product's representation of
the CA MICS jobs.

442 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.3 Incremental Update Statements

INCRUPDATE
----------

This statement is optional. Specify this to enable

incremental update for this product:

INCRUPDATE YES

If you do not specify or enable the INCRUPDATE parameter,

then this option defaults to this and incremental update is
disabled:

INCRUPDATE NO

*************************************************************
* *
* Note: Changing the INCRUPDATE parameter (either from NO *
* to YES or from YES to NO) requires regeneration *
* of the DAILY operational job by executing *
* prefix.MICS.CNTL(JCLGEND) or by specifying *
* DAILY in prefix.MICS.PARMS(JCLGENU) and *
* executing prefix.MICS.CNTL(JCLGENU). *
* *
* If you specify INCRUPDATE YES, you must also *
* generate the INCRccc, cccIUALC, and cccIUGDG jobs *
* (where ccc is the 3 character product ID). *
* Depending on the options you select, you may also *
* need to execute the cccIUALC and/or cccIUGDG *
* jobs. *
* *
*************************************************************

Incremental update can significantly reduce time and resource

usage in the DAILY job by letting you split out a major
portion of daily database update processing into multiple,
smaller, incremental updates executed throughout the day.

o Standard CA MICS database update processing involves (1)

reading and processing raw input data to generate DETAIL
and DAYS level CA MICS database files, followed by (2)
summarization of DETAIL/DAYS level data to update
week-to-date and month-to-date database files.

o When you activate incremental update:

- You can execute the first-stage processing (raw data

input to create DETAIL/DAYS files) multiple times

Chapter 7: PARAMETERS 443

7.3 Unit Level Parameters

throughout the day, each time processing a subset of

the total day's input data.

- Then, during the final update of the day (in the

DAILY job), the incremental DETAIL/DAYS files are
"rolled-up" to the database DETAIL and DAYS
timespans, and then summarized to update the
week-to-date and month-to-date files.

o Incremental update is independent of your internal step

restart or DBSPLIT specifications. You have the option
to perform incremental updates with or without internal
step restart support.

o Incremental update is activated and operates

independently by product. The incremental update job
for this product, INCRccc (where ccc is the product ID),
can execute concurrently with the incremental update job
for another product in the same unit database.

o The CA MICS database remains available for reporting and

analysis during INCRccc job execution.

*************************************************************
* *
* Note: CA MICS is a highly configurable system *
* supporting up to 36 unit databases, each of which *
* can be configured and updated independently. *
* Incremental update is just one of the options you *
* can use to configure your CA MICS complex. *
* *
* All efforts should be made to employ CA MICS *
* configuration capabilities to minimize issues *
* prior to activating incremental update. For *
* example: *
* *
* o Splitting work to multiple units is an *
* effective way to enable parallel database *
* update processing *
* *
* o Adjusting account code definitions to ensure *
* adequate data granularity while minimizing *
* total database space and processing time *
* *
* o Tailoring the database to drop measurements *
* and metrics of lesser value to your *
* data center, thereby reducing database update *
* processing and resource consumption *
* *

444 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

* While incremental update is intended to reduce *

* DAILY job elapsed time, total resource usage of *
* the combined INCRccc and DAILY jobs steps can *
* increase due to the additional processing *
* required to maintain the incremental update *
* "to-date" files and for roll-up to the unit *
* database. The increased total resource usage *
* will be more noticeable with small data volumes, *
* where processing code compile time is a greater *
* percentage of total processing cost. *
* *
*************************************************************

Note: When you activate incremental update (INCRUPDATE YES),

the following optional incremental update parameters are
enabled. These parameters have no effect if incremental
update is disabled (INCRUPDATE NO). For more details, see
the individual parameter descriptions later in this section.

o INCRDB PERM/TAPE/DYNAM

o INCRDETAIL data_set_allocation_parameters

o INCRDAYS data_set_allocation_parameters

o INCRCKPT data_set_allocation_parameters

o INCRSPLIT USE/IGNORE data_set_allocation_parameters

Incremental update processing reads and processes raw

measurement data to create and maintain DETAIL and DAYS level
"to-date" files for the current day.

o These incremental update database files are maintained on

unique z/OS data sets, independent of the standard CA MICS
database files, and independent of any other product's
incremental update database files. There is one data set
each for DETAIL and DAYS level "to-date" data and a single
incremental update checkpoint data set for this product in
this unit.

o The incremental update DETAIL and DAYS files can be

permanent DASD data sets, or they can be allocated
dynamically as needed and deleted after DAILY job
processing completes. Optionally, you can keep the
incremental update DETAIL and DAYS files on tape, with
the data being loaded onto temporary DASD space as
needed for incremental update or DAILY job processing.
See the INCRDB PERM/TAPE/DYNAM option for more

Chapter 7: PARAMETERS 445

7.3 Unit Level Parameters

information.

After activating incremental update, you will use three

incremental update facility jobs found in prefix.MICS.CNTL
(Note that ccc is the product ID):

o cccIUALC

You execute this job to allocate and initialize the

incremental update checkpoint file, and optionally the
incremental update DETAIL and DAYS database files.
cccIUALC is generally executed just ONE time.

o cccIUGDG

You execute this job to add generation data group (GDG)

index definitions to your system catalog in support of
the INCRDB TAPE option. cccIUGDG is generally executed
just ONE time.

o INCRccc

This is the job you execute for each incremental update.

You will integrate this job into your database update
procedures for execution one or more times per day
to process portions of the total day's measurement data.

Note: The DAILY job is run once at the end of the day.
It will perform the final incremental update for the day's
data, and then roll-up the incremental DETAIL/DAYS files
to the database DETAIL and DAYS timespans and update the
week-to-date and month-to-date files.

INCRUPDATE Considerations
-------------------------

o Overhead

Incremental update is intended to reduce DAILY job

resource consumption and elapsed time by offloading a
major portion of database update processing to one or
more executions of the INCRccc job. In meeting this
objective, incremental update adds processing in the
INCRccc and DAILY jobs to accumulate data from each
incremental update execution into the composite "to-date"
DETAIL and DAYS incremental update files, and also adds
processing in the DAILY job to copy the incremental
update files to the unit database DETAIL and DAYS

446 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

timespans. The amount of this overhead and the savings in

the DAILY job are site-dependent, and will vary based on
input data volume and on the number of times INCRccc is
executed each day.

In addition, activating incremental update will cause

additional compile-based CPU time to be consumed in the
DAYnnn DAILY job step. The increase in compile time is
due to additional code included for each file structure in
support of the feature. This increase should be static
based on the scope of the CA MICS data integration product
in terms of files. This compile-time increase does not
imply an increase in elapsed or execution time.
Incremental update allows I/O bound, intensive processing
(raw data inputting, initial CA MICS transformation, etc.)
to be distributed outside of the DAILY job. I/O
processing is the largest contributor to elapsed time in
large volume applications. Thus, the expected overall
impact is a decrease in the actual runtime of the DAYnnn
job step.

o Increased "Prime Time" Workload

By offloading work from the DAILY job to one or more

INCRccc executions throughout the day, you are
potentially moving system workload and DASD work space
usage from the "off-hours," (when the DAILY job is
normally executed) to periods of the day where your
system resources are in highest demand. You should
schedule INCRccc executions carefully to avoid adverse
impact to batch or online workloads. For example, if your
site's "prime shift" is 8:00 AM to 5:00 PM, you might
choose to schedule incremental updates for 7:00 AM (just
before "prime shift") and 6:00 PM (just after "prime
shift"), with the DAILY job executing just after midnight.

o Increased DASD Usage

The DASD space required for the incremental update DETAIL

and DAYS database files is in addition to the DASD space
already reserved for the CA MICS database. By default,
the incremental update database files are permanently
allocated, making this DASD space unavailable for other
applications. In general, you can assume that the
incremental update database files will require space
equivalent to two cycles of this product's DETAIL and
DAYS timespan files.

Alternatively, the incremental update database files can

Chapter 7: PARAMETERS 447

7.3 Unit Level Parameters

be allocated in the first incremental update of the day

and deleted by the DAILY job (see the INCRDB DYNAM option
later in this section). This approach reduces the amount
of time that the DASD space is dedicated to incremental
update, and lets the amount of DASD space consumed
increase through the day as you execute each incremental
update.

A third option is to store the incremental update

database files on tape (see the INCRDB TAPE option).
With this approach, the DASD space is required just for
the time that each incremental update or DAILY job step
is executing. Note that while this alternative reduces
the "permanent" DASD space requirement, the total amount
of DASD space required while the incremental update or
DAILY jobs are executing is unchanged. In addition, the
TAPE option adds processing to copy the incremental
update files to tape, and to reload the files from tape
to disk.

Note: The incremental update checkpoint file is always a

permanently allocated disk data set. This is a small data
set and should not be an issue.

o Operational Complexity

Incremental update expands your measurement data

management and job scheduling issues. You must ensure
that each incremental update and the DAILY job processes
your measurement data chronologically; that is, each job
must see data that is newer than the data processed by the
prior job. By incrementally updating the database, you
have more opportunities to miss a log file, or to process
a log out of order.

o Interval End Effects

Each incremental update processes a subset of the day's

measurement data, taking advantage of early availability
of some of the day's data, for example, when a
measurement log fills and switches to a new volume. This
can cause a problem if the measurement log split occurs
while the data source is logging records for the end of a
measurement interval, thus splitting the data for a
single measurement interval across two log files. When
an incremental update processes the first log file, the
checkpoint high end timestamp is set to indicate that
this split measurement interval has been processed.
Then, when the rest of the measurement interval's data is

448 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

encountered in a later update, it can be dropped as

duplicate data (because data for this measurement
interval end timestamp has already been processed).

Appropriate scheduling of log dumps and incremental

updates can avoid this problem. For example, if you plan
to run incremental updates at 7:00 AM and 6:00 PM, you
could force a log dump in the middle of the measurement
interval just prior to the scheduled incremental update
executions. This is an extension of the procedure you
may already be using for end-of-day measurement log
processing. The objective is to ensure that all records
for each monitor interval are processed in the same
incremental update.

o Dynamic Allocation

When you activate incremental update and specify TAPE or

DYNAM for the INCRDB parameter, dynamic allocation is
employed for the incremental update database files. If
your site restricts dynamic allocation of large, cataloged
data sets, you must use the INCRDETAIL and INCRDAYS
parameters to direct incremental update data set
allocation to a generic unit or storage class where
dynamic allocation is allowed.

o Data Set Names

The incremental update database files are allocated and

cataloged according to standard CA MICS unit database
data set name conventions. The DDNAME and default data
set names are (where ccc is the product ID):

o Incremental update checkpoint file,

//IUCKPT DD DSN=prefix.MICS.ccc.IUCKPT,.....

o Incremental update DETAIL

//IUDETAIL DD DSN=prefix.MICS.ccc.IUDETAIL,.....

o Incremental update DAYS

//IUDAYS DD DSN=prefix.MICS.ccc.IUDAYS,....

Since these data sets conform to the same data set name
conventions as your existing CA MICS data sets, there
should be few, if any, data-set-name-related allocation
issues. However, it is possible to override the data set
names if required. Contact Technical Support at
http://ca.com/support for assistance if you must change
data set names.

Chapter 7: PARAMETERS 449

7.3 Unit Level Parameters

*************************************************************
* *
* Note: If your data center uses the TAPEfff option *
* or USRXfff exits, be sure to review the *
* important considerations in Section 10.3.1 of *
* this guide. *
* *
*************************************************************

INCRDB
------

This statement is optional. The default is this:

INCRDB PERM

Note: INCRDB is ignored when you specify INCRUPDATE NO.

Specify this or take the default, to keep the incremental

update database DETAIL and DAYS files on permanently
allocated DASD data sets:

INCRDB PERM

Execute the prefix.MICS.CNTL(cccIUALC) job to allocate the

incremental update database files.

*************************************************************
* *
* Note: The incremental update checkpoint file is always *
* a permanently allocated DASD data set. *
* *
*************************************************************

Specify this to offload the incremental update DETAIL and

DAYS files to tape between incremental update executions:

INCRDB TAPE #gdgs UNIT=name

With the TAPE option, the incremental update DETAIL and DAYS
DASD data sets are dynamically allocated at the beginning of
the incremental update job or DAILY job step, and then are
deleted after the job step completes.

o The first incremental update job of the day allocates

450 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

and initializes the incremental update database files.

At the end of the job, the DETAIL and DAYS files are
copied to a new (+1) generation of the incremental
update tape data sets. Then the DASD files are deleted.

o Subsequent incremental update jobs restore the DASD

incremental update database files from the current, (0)
generation, incremental update tape data sets before
processing the input measurement data. At the end of
the job, the DETAIL and DAYS files are copied to a new
(+1) generation of the incremental update tape data
sets. Then the DASD files are deleted.

o The DAILY job step also restores the DASD incremental

update database files from the (0) generation tape files
before processing the input data, but does NOT copy the
incremental update database files to tape. Thus, the
DAILY job actually creates a new, null (+1) generation.

o Use the #gdgs parameter to specify the maximum number of

incremental update tape generations. The minimum is 2
and the maximum is 99, with a default of 5. You should
set the number of generations equal to or greater than
the number of incremental updates, including the DAILY
job you plan to execute each day. This will facilitate
restart and recovery if you encounter problems requiring
you to reprocess portions of the day's measurement data.

o Use the optional UNIT=name parameter to specify a tape

unit name for the incremental update database output
tapes. The default is to use the same tape unit as the
input tapes.

o A special index must be created in your system catalog for

each of the incremental update tape data set generation
data groups. The prefix.MICS.CNTL(cccIUGDG) job will
generate the statements to create the incremental update
GDG index definitions. The statements are generated for
either a VSAM or CVOL (control volume) catalog according
to your prefix.MICS.PARMS(JCLDEF) specifications.

- Before each index is built, it is deleted. These

DLTX (or DELETE) statements will cause an error
message if no entry exists. This is done so that you
can change the number of entries without having to
delete each of the index entries.

- DLTX and BLDG (or DELETE and DEFINE) will fail if

there is a cataloged data set with the same index.

Chapter 7: PARAMETERS 451

7.3 Unit Level Parameters

IDCAMS (or IEHPROGM) will issue a message and give

a return code of 8. This is not a problem for
non-GDG entries or if the GDG already has the
desired number of entries.

- If you want to change the number of entries kept in

a GDG with cataloged data sets, you must do the
following:

1. Uncatalog any existing entries in the GDG.

2. Delete the index with a DLTX (or DELETE).
3. Create the index with a BLDG (or DEFINE).
4. Catalog any entries uncataloged in step 1.

o The incremental update tape data set names are as follows,

where ccc is the product ID:

- Incremental update tape DETAIL file

tapeprefix.MICS.ccc.IUXTAPE.GnnnnV00

- Incremental update tape DAYS file

tapeprefix.MICS.ccc.IUDTAPE.GnnnnV00

*************************************************************
* *
* Note: The INCRDETAIL and INCRDAYS parameters are *
* required when you specify INCRDB TAPE. *
* *
*************************************************************

Specify this to dynamically allocate the incremental update

DETAIL and DAYS DASD data sets in the first incremental
update of the day, and then delete these data sets at the end
of the DAILY job step:

INCRDB DYNAM

o With this option, no space is used for the incremental

update database files during the time between the end of
the DAILY job step and the beginning of the next day's
first incremental update.

o With this approach, you can set the data set allocation
parameters so that the incremental update DETAIL and DAYS
data sets start out with a minimum allocation (for
example, enough space for one incremental update) and then
grow through secondary allocations as additional space is

452 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

required for subsequent incremental updates.

*************************************************************
* *
* Note: The INCRDETAIL and INCRDAYS parameters are *
* required when you specify INCRDB DYNAM. *
* *
*************************************************************

INCRDETAIL
----------

This statement is required if you specify either of these:

INCRDB TAPE

INCRDB DYNAM

Otherwise, this statement is optional. There is no default.

Specify this to define data set allocation parameters for the

incremental update DETAIL data set (IUDETAIL):

INCRDETAIL data_set_allocation_parameters

Note: INCRDETAIL is ignored when you specify INCRUPDATE NO.

The incremental update DETAIL data set (IUDETAIL) contains

the current incremental update detail-level database files,
and the DETAIL "to-date" data for the current daily update
cycle. You should allocate DASD space equivalent to two
cycles of this product's DETAIL timespan data.

If you specified INCRDB PERM (the default), your INCRDETAIL

parameter specifications are used in generating the cccIUALC
job (where ccc is the product ID).

o You will execute the cccIUALC job to allocate and

initialize the incremental update database and checkpoint
files.

o Omit the INCRDETAIL parameter if you prefer to specify

data set allocation parameters directly in the generated
prefix.MICS.CNTL(cccIUALC) job.

If you specified INCRDB TAPE or INCRDB DYNAM, your INCRDETAIL

parameter specifications are used in incremental update

Chapter 7: PARAMETERS 453

7.3 Unit Level Parameters

DETAIL data set dynamic allocation during incremental update

or DAILY job step execution.

o The INCRDETAIL parameter is required for the TAPE or

DYNAM option.

o Specify data set allocation parameters, separated by

blanks, according to SAS LIBNAME statement syntax. If
you need multiple lines, repeat the INCRDETAIL keyword
on the continuation line.

o INCRDETAIL accepts the engine/host options documented in

the SAS Companion for the z/OS Environment, including
STORCLAS, UNIT, SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and
VOLSER.

Important! DO NOT SPECIFY THE DISP PARAMETER.

o You can override the INCRDETAIL data set allocation

parameters at execution-time using the //PARMOVRD
facility. For more information about execution-time
override of dynamic data set allocation parameters, see
the PIOM, section 2.3.6.

Example 1:

INCRDETAIL STORCLAS=MICSTEMP SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated, where:

xxxx is TRK, CYL, or blklen

pp is the primary allocation
ss is the secondary allocation

and ROUND specifies that the allocated space be

"rounded" to a cylinder boundary when the unit
specified was a block length. ROUND is ignored
with the TRK or CYL options.

Example 2 (multiple lines):

INCRDETAIL STORCLAS=MICSTEMP UNIT=SYSDA

INCRDETAIL SPACE=(xxxx,(pp,ss),,,ROUND)

454 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

UNIT - specifies the generic unit for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated.

INCRDAYS
--------

This statement is required if you specify either of these:

INCRDB TAPE

INCRDB DYNAM

Otherwise, this statement is optional. There is no default.

Specify this to define data set allocation parameters for the

incremental update DAYS data set (IUDAYS):

INCRDAYS data_set_allocation_parameters

Note: INCRDAYS is ignored when you specify INCRUPDATE NO.

The incremental update DAYS data set (IUDAYS) contains the

current incremental update days-level database files, and the
DAYS "to-date" data for the current daily update cycle. You
should allocate DASD space equivalent to two cycles of this
product's DAYS timespan data.

If you specified INCRDB PERM (the default), your INCRDAYS

parameter specifications are used in generating the cccIUALC
job (where ccc is the product ID).

o You will execute the cccIUALC job to allocate and

initialize the incremental update database and checkpoint
files.

o Omit the INCRDAYS parameter if you prefer to specify

data set allocation parameters directly in the generated
prefix.MICS.CNTL(cccIUALC) job.

Chapter 7: PARAMETERS 455

7.3 Unit Level Parameters

If you specified INCRDB TAPE or INCRDB DYNAM, your INCRDAYS

parameter specifications are used in incremental update DAYS
data set dynamic allocation during incremental update or
DAILY job step execution.

o The INCRDAYS parameter is required for the TAPE or DYNAM

option.

o Specify data set allocation parameters, separated by

blanks, according to SAS LIBNAME statement syntax. If
you need multiple lines, repeat the INCRDAYS keyword on
the continuation line.

o INCRDAYS accepts the engine/host options documented in the

SAS Companion for the z/OS Environment, including
STORCLAS, UNIT, SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and
VOLSER.

Important! DO NOT SPECIFY THE DISP PARAMETER.

o You can override the INCRDAYS data set allocation

parameters at execution-time using the //PARMOVRD
facility. For more information about execution-time
override of dynamic data set allocation parameters, see
the PIOM, Section 2.3.6.

Example 1:

INCRDAYS STORCLAS=MICSTEMP SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated, where:

xxxx is TRK, CYL, or blklen

pp is the primary allocation
ss is the secondary allocation

and ROUND specifies that the allocated space be

"rounded" to a cylinder boundary when the unit
specified was a block length. ROUND is ignored
with the TRK or CYL options.

Example 2 (multiple lines):

456 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

INCRDAYS STORCLAS=MICSTEMP UNIT=SYSDA

INCRDAYS SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

UNIT - specifies the generic unit for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated.

INCRCKPT
--------

This statement is optional. Specify this to override default

data set allocation parameters for the incremental update
checkpoint data set:

INCRCKPT data_set_allocation_parameters

Note: INCRCKPT is ignored when you specify INCRUPDATE NO.

The incremental update checkpoint data set tracks incremental

update job status and the data that has been processed during
the current daily update cycle. The incremental update
checkpoint is used to detect and block the input of duplicate
data during incremental update processing. This data set
will be exactly the same size as prefix.MICS.CHECKPT.DATA
(the unit checkpoint data set), usually 20K to 200K depending
on the prefix.MICS.PARMS(SITE) CKPTCNT parameter (100-1000).

Your INCRCKPT parameter specifications are used in generating

the cccIUALC job (where ccc is the product ID).

o You will execute the cccIUALC job to allocate and

initialize the incremental update checkpoint file. If you
specified INCRDB PERM, then the cccIUALC job will also
allocate the incremental update DETAIL and DAYS database
files.

o By default the incremental update checkpoint data set is

allocated as SPACE=(TRK,(5,2)) using the value you
specified for the prefix.MICS.PARMS(JCLDEF) DASDUNIT

Chapter 7: PARAMETERS 457

7.3 Unit Level Parameters

parameter.

o Omit the INCRCKPT parameter if you prefer to override

data set allocation parameters directly in the generated
prefix.MICS.CNTL(cccIUALC) job.

Specify data set allocation parameters, separated by blanks,

according to SAS LIBNAME statement syntax. If you need
multiple lines, repeat the INCRCKPT keyword on the
continuation line.

INCRCKPT accepts the engine/host options documented in the

SAS Companion for the MVS Environment, including STORCLAS,
UNIT, SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and VOLSER.

Important! DO NOT SPECIFY THE DISP PARAMETER.

Example 1:

INCRCKPT STORCLAS=MICSTEMP SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated, where:

xxxx is TRK, CYL, or blklen

pp is the primary allocation
ss is the secondary allocation

and ROUND specifies that the allocated space be

"rounded" to a cylinder boundary when the unit
specified was a block length. ROUND is ignored
with the TRK or CYL options.

Example 2 (multiple lines):

INCRCKPT STORCLAS=MICSTEMP UNIT=SYSDA

INCRCKPT SPACE=(xxxx,(pp,ss),,,ROUND)

where:

458 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

UNIT - specifies the generic unit for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated.

INCRSPLIT
---------

This statement is optional and defaults to this:

INCRSPLIT IGNORE

Specify the following if you want the incremental update job

for this product to get input measurement data from the
output of the SPLITSMF job. The optional
data_set_allocation_parameters are used by the SPLITSMF job
when creating the measurement data file for this product.

INCRSPLIT USE data_set_allocation_parameters

Note: INCRSPLIT is ignored when you specify INCRUPDATE NO.

This option would be used when multiple products in a

single unit database are enabled to incremental update. The
SPLITSMF job performs the same function for incremental
update jobs as the DAILY job DAYSMF step performs for the
DAYnnn database update steps.

o The SPLITSMF job dynamically allocates, catalogs, and

populates prefix.MICS.ccc.IUSPLTDS data sets for each
product in the unit database for which you specified both
the INCRUPDATE YES and INCRSPLIT USE parameters. These
data sets are then deleted after processing by the
appropriate INCRccc job.

o Specify data set allocation parameters, separated by

blanks, according to SAS LIBNAME statement syntax. If you
need multiple lines, repeat the INCRSPLIT keyword on each
continuation line.

o INCRSPLIT accepts the engine/host options documented in

the SAS Companion for the MVS Environment, including
STORCLAS, UNIT, SPACE, BLKSIZE, DATACLAS, MGMTCLAS, and

Chapter 7: PARAMETERS 459

7.3 Unit Level Parameters

VOLSER.

Important! DO NOT SPECIFY THE DISP PARAMETER.

Specify the following or accept the default if you want the

incremental update jobs for this product to get their input
measurement data from the data sets specified in the INPUTccc
(or INPUTSMF) member of prefix.MICS.PARMS:

INCRSPLIT IGNORE

When you specify INCRSPLIT IGNORE, this product will NOT

participate in SPLITSMF job processing.

Example 1:

INCRSPLIT USE STORCLAS=MICSTEMP SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated, where:

xxxx is TRK, CYL, or blklen

pp is the primary allocation
ss is the secondary allocation

and ROUND specifies that the allocated space be

"rounded" to a cylinder boundary when the unit
specified was a block length. ROUND is ignored
with the TRK or CYL options.

Example 2 (multiple lines):

INCRSPLIT USE STORCLAS=MICSTEMP UNIT=SYSDA

INCRSPLIT SPACE=(xxxx,(pp,ss),,,ROUND)

where:

STORCLAS - specifies a storage class for a new data set.

The name can have up to eight characters.

460 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

UNIT - specifies the generic unit for a new data set.

The name can have up to eight characters.

SPACE - specifies how much disk space to provide for

a new data set being allocated.

DYNAMWAIT
---------

This statement is optional. Specify the following:

DYNAMWAIT minutes

to override the default amount of time, in minutes, the DAILY

and/or INCRccc job will wait for an unavailable data set.

Note: This optional parameter is not normally specified.

The system default is adequate for most data centers.

Internal Step Restart and Incremental Update facilities use

z/OS dynamic allocation services to create new data sets and
to access existing data sets. Data set naming conventions
and internal program structure are designed to minimize data
set contention. However, if data set allocation does fail
because another batch job or online user is already using a
data set, DAILY and/or INCRccc processing will wait 15
seconds and then try the allocation again. By default, the
allocation will be attempted every 15 seconds for up to 15
minutes. After 15 minutes, the DAILY or INCRccc job will
abort.

If data set contention in your data center does cause

frequent DAILY or INCRccc job failures, and you are unable to
resolve the contention through scheduling changes, you may
want to use the DYNAMWAIT parameter to increase the maximum
number of minutes the DAILY and/or INCRccc jobs will wait for
the data set to become available.

On the other hand, if your data center standards require

that the DAILY and/or INCRccc jobs fail immediately if
required data sets are unavailable, specify the following:

DYNAMWAIT 0

Note: You can override the DYNAMWAIT parameter at

execution-time using the //PARMOVRD facility. For

Chapter 7: PARAMETERS 461

7.3 Unit Level Parameters

more information about execution-time override of

dynamic data set allocation parameters, see the PIOM,
section 2.3.6.

The following section discusses enabling this option:

1 - Implement Incremental Update

462 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.3.1 Implement Incremental Update

To implement incremental update in the CA MICS DB2 Analyzer,

follow the checklist provided below:

****************************************************
* *
* IMPLEMENT INCREMENTAL UPDATE *
* *
****************************************************

___ 1. Edit prefix.MICS.PARMS(cccOPS), where (ccc) is the

component identifier:

o Specify the following:

INCRUPDATE YES

o If you want to store the incremental update

database files on tape between incremental
updates, specify this:

INCRDB TAPE #gdgs

o If you want to allocate the incremental update

database files during the first incremental update
of the day and delete these data sets at the end
of the DAILY job step, specify this:

INCRDB DYNAM

o If you specified INCRDB TAPE or INCRDB DYNAM, then

you must also specify this:

INCRDETAIL data_set_allocation_parameters
INCRDAYS data_set_allocation_parameters

o If you want the incremental update job for this

product to get input measurement data from the
output of the SPLITSMF job, specify this:

INCRSPLIT USE data_set_allocation_parameters

o For additional information on related topic,

review the documentation for this product on
INCRCKPT, INCRDETAIL, INCRDAYS, or INCRSPLIT
parameters to override default data set allocation
parameters.

Chapter 7: PARAMETERS 463

7.3 Unit Level Parameters

___ 2. Submit the job in prefix.MICS.CNTL(cccPGEN).

___ 3. Edit prefix.MICS.PARMS(JCLGENU) so that it contains

two or more lines reading:

DAILY
INCRccc cccIUALC cccIUGDG

___ 4. Submit the job in prefix.MICS.CNTL(JCLGENU). Ensure

that there are no error messages in MICSLOG or
SYSTSPRT, that the MICSLOG contains the normal
termination message, BAS10999I, and that the job
completes with a condition code of zero.

___ 5. Edit the job in prefix.MICS.CNTL(cccIUALC).

o Inspect and/or specify data set allocation

parameters for the incremental update database and
checkpoint files. If you specified INCRDB TAPE or
INCRDB DYNAM, the cccIUALC job will only allocate
the incremental update checkpoint data set.

o Submit the job. Ensure that there are no error

messages in MICSLOG or SASLOG, and that the job
completes with a condition code of zero.

___ 6. If you specified INCRDB TAPE, submit the job in

prefix.MICS.CNTL(cccIUGDG) to define generation group
indexes for the incremental update DETAIL and DAYS
tape data sets. Examine SASLOG, MICSLOG, and
SYSPRINT to verify that the generation group indexes
were correctly defined.

Note: You may see error messages for the DLTX (or
DELETE) statements. This is not a problem. cccIUGDG
deletes each index prior to defining it, and an error
message is issued if the index does not yet exist
(e.g., if this is the first time you ran the cccIUGDG
job).

___ 7. The following operational job(s) have changed:

DAILY INCRccc

If your site has implemented the operational CA MICS

processes in a scheduling product, the JCL may have
to be refreshed in that product. See the scheduling
product's administrator for the exact processes

464 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

involved in updating that product's representation of

the CA MICS jobs.

___ 8. Implement operational procedures for gathering input

measurement data and executing incremental updates
(INCRccc) during the day.

You may also need to modify operational procedures

for the DAILY job to ensure that processing is
limited to input measurement data that has not been
input to one of the day's incremental update
executions.

Chapter 7: PARAMETERS 465

7.3 Unit Level Parameters

7.3.1.4 DETAIL Tape Processing Overview

For certain high volume files, the CA MICS architecture

provides the ability to create optional DETAIL timespan data
sets. These optional data sets are separate from the normal
CA MICS database and have the following characteristics:

o They are created during the component step execution:

during either an incremental update or the DAILY update
run. Each DETAIL tape file has a separate DD statement in
the DAILY or incremental update job that specifies the
data set name and other data set characteristics.

o The data set name (DSN) for each DETAIL tape in a

component step is:

tapeprefix.tmics.DETAIL.iiifff(+1)

where:

- tapeprefix is the tape prefix value specified with the

TAPEPREFIX statement in prefix.MICS.PARMS(JCLDEF)

- tmics is either null when NOMICSLEVEL is specified, or

MICS if MICSLEVEL is specified with the TAPEPREFIX
statement in prefix.MICS.PARMS(JCLDEF)

- iii is the three character CA MICS information

area associated with the file

- fff is the three character CA MICS file identifier

Example: For the CA MICS DB2 Analyzer, if DETAIL tape

processing were activated for the DB2DSU file,
the following prefix.MICS.PARMS(JCLDEF)
statement:

TAPEPREFIX CPLXA.U1T NOMICSLEVEL

yields the following DETAIL tape DSN:

CPLXA.U1T.DETAIL.DB2DSU(+1)

o There is no cycle aging associated with these data sets.

Instead, each DETAIL tape data set created is an 01 cycle
(for example, DB2DSU01), and multiple instances are
managed using Generation Data Groups (GDGs).

466 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

o The creation of DETAIL tape data sets is independent of

any sharedprefix.MICS.GENLIB customization choices. You
can have one or more cycles of a file written to and
managed in the unit DETAIL timespan database, and also
use the DETAIL tape feature to create independent data
sets for that same file.

o The decision to create DETAIL tape data sets is made at

the unit level. You can choose to create DETAIL tape data
sets for a component file in unit A, but not in unit B.

o While the expectation is that these files will be written

to tape, you can make JCL choices to target other media
such as DASD. Note that the SAS sequential tape engine
will be used to write these files for both DASD and tape
data sets.

o Unique output exits are provided to permit manipulation

and subsetting of the records written to the DETAIL tape
data sets. This manipulation and subsetting, however, has
no impact on files written to the standard CA MICS
database.

The activation of DETAIL tape data sets is accomplished by

specifying a TAPEfff statement in prefix.MICS.PARMS(cccOPS).

Customization of the JCL used to create each data set is

accomplished using a cascading hierarchy of parameters
beginning with choices made with the TAPEPARM statement in
prefix.PARMS(JCLDEF).

The following sections provide the information required to

activate DETAIL tape processing:

1 - Component Files Supporting DETAIL Tape Activation

2 - DETAIL Tape JCL Customization Overview
3 - The TAPEfff Statement
4 - The DETAILTAPEPARM Statement
5 - DETAILTAPESMSPARM and TAPEfffSMS Statements
6 - DETAIL Tape User Exits
7 - Activating DETAIL Tape Checklist
8 - Deactivating DETAIL Tape Checklist

Chapter 7: PARAMETERS 467

7.3 Unit Level Parameters

7.3.1.4.1 DB2 DETAIL Tape Supported Files

The CA MICS DB2 Analyzer supports DETAIL tape processing for

the following files:

o DB2DSU - DB2 User Activity File

o DB2DSP - DB2 Plan Activity File
o DB2DDU - DB2 User DDF Activity File
o DB2DDP - DB2 Plan DDF Activity File
o DB2DPP - DB2 Package/DBRM Activity File
o DB2DBU - DB2 User Buffer Pool Activity File
o DB2DBP - DB2 Plan Buffer Pool Activity File

468 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.4.2 Overview of JCL Customization Parameters

The JCL for DETAIL tape data sets is constructed using tape-
related parameters specified in prefix.MICS.PARMS(JCLDEF) and
prefix.MICS.PARMS(cccOPS).

Each DETAIL tape data set has a unique DD in the component

step. The JCL for each DETAIL tape data set is customized
according to user-specified JCL parameters such as the number
of generation data group (GDG) entries maintained, unit
names, volume count, tape volume density, retention and
expiration dates, as well as System Managed Storage (SMS)
keywords (for example, STORCLAS=storclas).

CA MICS provides a hierarchical means to specify tape-related

JCL parameters suitable for each data center.

The hierarchy, as it applies to DETAIL tape specification, is

described below:

o Unit Level - TAPEPARM and TAPESMSPARM

Used for all tape data sets created by all components in

the unit. Specified in prefix.MICS.PARMS(JCLDEF)

o Unit DETAIL Tape Level - DETAILTAPEPARM and

DETAILTAPESMSPARM

Used for all DETAIL tape data sets created by all

components in the unit. Overrides choices made in TAPEPARM
and TAPESMSPARM. Specified in prefix.MICS.PARMS(JCLDEF).

o Component Level - DETAILTAPEPARM and DETAILTAPESMSPARM

Used for all DETAIL tape data sets created by a particular

component. Overrides all choices made in JCLDEF.
Specified in prefix.MICS.PARMS(cccOPS), where ccc
represents the component.

o File Level - TAPEfff and TAPEfffSMS

Used for a particular DETAIL tape data set. The fff

identifies the specific DETAIL file. Overrides all choices
made in JCLDEF and choices made with DETAILTAPEPARM and
DETAILTAPESMSPARM in prefix.MICS.PARMS(cccOPS). Specified
in prefix.MICS.PARMS(cccOPS), where ccc represents the
component.

The JCL parameter specification hierarchy used for DETAIL

Chapter 7: PARAMETERS 469

7.3 Unit Level Parameters

tape customization is shown graphically in the following

diagram:

DETAIL Tape JCL Parameter Hierarchy

+---------------------------+
| prefix.MICS.PARMS(JCLDEF) |
+---------------------------+
| |
| +----------------+ |
| | TAPEPARM |----------> Defaults for all tape
| | TAPESMSPARM | | data sets in unit
| +-------+--------+ |
| | |
| +--+ |
| | |
| V | Defaults for all
| +-------+---------+ | DETAIL tape data sets
| | DETAILTAPEPARM |------> in unit. Overrides
| |DETAILTAPESMSPARM| | TAPEPARM and
| +-------+---------+ | TAPESMSPARM choices.
| | |
+------------|--------------+
|
|
V
+---------------------------+
| prefix.MICS.PARMS(cccOPS) |
+---------------------------+
| | Defaults for all
| +-----------------+ | DETAIL tape data sets
| | DETAILTAPEPARM |---------> for the component.
| |DETAILTAPESMSPARM| | Overrides all choices
| +-----------------+ | made in (JCLDEF).
| | |
| +--+ |
| | |
| V | Individual data set
| +-------+--------+ | choices for one file
| | TAPEfff |-------> (fff). Overrides
| | TAPEfffSMS | | all other tape
| +----------------+ | specifications.
| |
+---------------------------+
|
V

// DD statements and GDG generation

470 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.4.3 The TAPEfff Statement

The TAPEfff statement is used to:

o Activate DETAIL tape data set creation for the file

indicated by fff. The component files eligible for DETAIL
tape processing are listed in a previous section.

o Override, for the indicated file, any JCL-related

tape specifications made in prefix.MICS.PARMS(JCLDEF)
and prefix.MICS.PARMS(cccOPS) with TAPEPARM or
DETAILTAPEPARM statements.

The syntax is as follows:

TAPEfff <optional parameters>

where fff is the unique 3-character file identifier

The optional parameters include both keyword parameters and

keyword=value specifications. You can include multiple
TAPEfff statements if required in order to specify the
desired optional parameters. If you specify a parameter
multiple times, the last instance defines the value in
effect.

You can specify as many parameters as you want on each

statement, but each TAPEfff statement must end by column 72.
You may also choose to specify only one parameter per TAPEfff
statement. Either approach is acceptable.

The optional parameters available for the TAPEfff statement

are listed below:

TAPEfff GDG=nnn UNIT=unitname VOLCOUNT=n

TAPEfff EXPDT=expdt / RETPD=nnn / NOEXPDT
TAPEfff COMP/NOCOMP
TAPEfff STACK/NOSTACK AFF/NOAFF
TAPEfff MODEL='modeldsn' / MODEL=NOMODEL
TAPEfff DISK / TAPE SPACE=spacedef
TAPEfff VOLSER=volser

The following is a sample TAPEfff statement:

TAPEfff GDG=3 VOLCOUNT=7

In this sample, only the number of generation data groups

(GDGs) and VOLCOUNT parameters are explicitly specified for
the file fff. All other JCL related parameters for the data

Chapter 7: PARAMETERS 471

7.3 Unit Level Parameters

set will be set according to specifications made with

TAPEPARM and DETAILTAPEPARM statements according to the
hierarchy described in a previous section.

The optional parameters for the TAPEfff statement are

identical to those supported by the DETAILTAPEPARM statement.
A detailed description of the optional parameters is
presented immediately following the DETAILTAPEPARM statement
description.

472 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.4.4 The DETAILTAPEPARM Statement

In prefix.MICS.PARMS(cccOPS), the optional DETAILTAPEPARM

statement is used to specify parameters defining processing
options for CA MICS DETAIL tape data sets at the component
(ccc) level.

When specified in prefix.MICS.PARMS(cccOPS), the

DETAILTAPEPARM parameter specifications override unit level
tape data set defaults established by TAPEPARM and
DETAILTAPEPARM statements in prefix.MICS.PARMS(JCLDEF).

Refer to chapter 2 of the CA MICS Planning, Installation,

Operations, and Maintenance Guide for unit level TAPEPARM and
DETAILTAPEPARM statements in prefix.MICS.PARMS(JCLDEF).

The primary reason to include a DETAILTAPEPARM statement in

prefix.MICS.PARMS(cccOPS) is to specify unique parameters for
the DETAIL tapes created for a particular component (ccc).

For example, your site may want to direct the CA MICS DETAIL
tapes for a particular component (ccc) to a unique tape
volume pool, or to a tape device type such as a virtual tape
unit, or to a DASD pool backed by an archive facility. If
so, this could be accomplished by including the appropriate
DETAILTAPEPARM statements in prefix.MICS.PARMS(cccOPS).

DETAILTAPEPARM <parameters>

Note: In prefix.MICS.PARMS(cccOPS), all DETAILTAPEPARM

statements must precede any TAPEfff or TAPEfffSMS statements.

The general form of the DETAILTAPEPARM statement is the

keyword DETAILTAPEPARM, followed by one or more
DETAILTAPEPARM parameters. DETAILTAPEPARM parameters
include both keyword parameters and keyword=value
specifications. You can specify the DETAILTAPEPARM
statement as many times as you want in order to specify
all of the tape data set definitions you require.
If you specify a parameter multiple times, the last
instance defines the value in effect.

The following summarizes the DETAILTAPEPARM parameters:

o Each parameter is described in detail below.

o While the following syntax sample shows only one or

two parameters per statement (line), you have the

Chapter 7: PARAMETERS 473

7.3 Unit Level Parameters

option to specify as many parameters as you want on

each statement (limited only by the 72-character-
maximum line length).

DETAILTAPEPARM GDG=nnn UNIT=unitname VOLCOUNT=n

DETAILTAPEPARM EXPDT=expdt / RETPD=nnn / NOEXPDT
DETAILTAPEPARM COMP/NOCOMP
DETAILTAPEPARM STACK/NOSTACK AFF/NOAFF
DETAILTAPEPARM MODEL='modeldsn' / MODEL=NOMODEL
DETAILTAPEPARM DISK / TAPE SPACE=spacedef
DETAILTAPEPARM VOLSER=volser

The following is a sample DETAILTAPEPARM statement:

DETAILTAPEPARM GDG=3 VOLCOUNT=7

In this example, the default parameter values are used

for most of the DETAILTAPEPARM parameters.

The following describes each of the DETAILTAPEPARM

parameters:

o GDG=nnn

Defaults to 7.

The number of entries to be created in the GDG for

each DETAIL tape data set.

Overrides the TAPEPARM statement GDG=nnn.

o UNIT=unitname

Defaults to the value specified on the TAPEPARM

statement or to UNIT=3400-5 if UNIT=unitname is not
specified on the TAPEPARM statement.

The generic unit name for tape file allocation.

The parameter value (unitname) must be a valid 1 to
8 character generic unit name for your
installation. The value will be used in generated
tape data set JCL DD statement UNIT parameters.
CA MICS does not validate the unitname value except
to verify that it is non-blank and no more than 8
characters in length.

Overrides the TAPEPARM statement UNIT=unitname

value and/or the old-style TAPEUNIT statement.

474 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

o VOLCOUNT=n

Defaults to the value specified on the TAPEPARM

statement. If no VOLCOUNT is specified, the
z/OS default volume count of 5 will apply.

The volume count JCL parameter for CA MICS tape

data sets. Specify a decimal number from 1 to 255.

Overrides the TAPEPARM statement VOLCOUNT=nnn

parameter or the old-style VOLCOUNT statement.

o EXPDT=expdt

Defaults to the value specified on the TAPEPARM

statement. If no expiration date or retention
period is specified, a default retention period
is used which equals the GDG=nnn value.

Specify an expiration date definition which

replaces the derived default retention period
(RETPD) specification(s). This facility is
specifically intended for use by installations with
tape management systems which require specific
EXPDT definitions.

Note that for some tape management systems, certain

EXPDT values will make the tape available for
scratching immediately. Such values are NOT
desirable for CA MICS tapes.

The EXPDT=expdt parameter is optional, and, if

omitted, CA MICS will derive a RETPD=nnn
specification as appropriate for the specific
CA MICS tape data set being created and the number
of GDG entries defined.

Note: If you specify an EXPDT=expdt, then you must

also specify a value for the TMS statement
(e.g., TMS NONE).

Overrides the TAPEPARM statement EXPDT=expdt or

NOEXPDT parameter, or the old-style EXPDT
statement.

Note: The EXPDT=expdt, RETPD=nnn, and NOEXPDT

parameters are mutually exclusive.

o NOEXPDT

Chapter 7: PARAMETERS 475

7.3 Unit Level Parameters

Defaults to the value specified on the TAPEPARM

statement.

Specify NOEXPDT if you want CA MICS to omit both

the EXPDT=date and RETPD=days JCL parameters from
generated JCL statements for new tape data set
creation. This option is provided for those
installations where the tape management system or
SMS specifications automatically control tape
expiration dates and/or retention periods.

Note: If you specify the NOEXPDT parameter, you

must also specify a value for the TMS
statement (e.g., TMS NONE).

Overrides the TAPEPARM statement EXPDT=expdt or

NOEXPDT parameters, or the old-style EXPDT
statement.

Note: The NOEXPDT, EXPDT=expdt, and RETPD=nnn

parameters are mutually exclusive.

o COMP / NOCOMP

Defaults to the value specified on the TAPEPARM

statement. If neither COMP nor NOCOMP is
specified, the z/OS default for the selected tape
unit type will apply.

This parameter specifies data compaction (COMP) or

no data compaction (NOCOMP) for a tape device
enabled for hardware compaction. Data compaction
is only supported for IBM standard labels. If
specified, the value will be coded in the TRTCH
subparameter of the DCB JCL parameter. If not
specified, no TRTCH subparameter will be generated.

Overrides the TAPEPARM statement COMP/NOCOMP

parameter or the old-style IDRC statement.

o STACK / NOSTACK

Defaults to NOSTACK for DETAIL tapes.

Specify STACK to place multiple CA MICS tape files

on a single tape volume. This is a mode of
operation where a minimum number of tape volumes
are used and tape mounts are minimized. CA MICS

476 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

JCL statements are generated with the

VOL=REF=ddname construct and unit affinity is
enforced (that is, STACK also means AFF).

Specify NOSTACK (the default) to place exactly one

CA MICS tape file on a tape volume. With this
option the generated CA MICS JCL statements will
NOT contain the VOL=REF=ddname construct. This
option is useful if your implementation of a
virtual tape system prohibits "stacked" tape
volumes, or if you are directing CA MICS tape files
to a DASD pool backed with an archival facility.

Overrides the TAPEPARM statement STACK/NOSTACK

parameter.

o AFF / NOAFF

Defaults to the value specified on the TAPEPARM

statement or to AFF.

Specify AFF to use a single tape unit for all

related tape files. This is the normal mode of
operation where a minimum number of tape units are
used and tape mounts are minimized. CA MICS JCL
statements are generated with the UNIT=AFF=ddname
construct. AFF is required for the STACK option.

Specify NOAFF to enable allocation of different

tape units for each CA MICS tape data set. With
this option the generated CA MICS JCL statements
will NOT contain the UNIT=AFF=ddname construct.
You may find this option useful with certain
virtual tape system implementations, or where you
are directing CA MICS tape files to a DASD pool
backed with an archival facility.

Note, if you specify NOAFF, then NOSTACK is

automatically set.

Overrides the TAPEPARM statement AFF/NOAFF

parameter.

o MODEL='modeldsn' / MODEL=NOMODEL

Defaults to the value specified on the TAPEPARM

statement.

The fully qualified name of a cataloged data set to

Chapter 7: PARAMETERS 477

7.3 Unit Level Parameters

be used when defining or extending GDG entries.

Ensure that the data set's DCB characteristics are
LRECL=0 and BLKSIZE=0. Coding BLKSIZE=0 causes SAS
to use the blocksize defined by the BLKSIZE(TAPE)
option defined in the configuration member(s)
referenced by the CONFIG DD statement. If this
parameter is omitted, a CA MICS generation job will
allocate a default model GDG data set.

If NOMODEL is specified as the model dataset name,

the use of the model dataset in the DCB
specification will be bypassed.

Overrides the TAPEPARM statement MODEL='modeldsn'

parameter or the old-style SYSTEMMODEL statement.

o DISK / TAPE

Defaults to TAPE.

Specify DISK if you want to write the dataset to a

disk instead of a tape. Specify TAPE to write the
dataset to a tape.

When you specify DISK, make sure that you have both
a UNIT parameter with a generic unit name of a disk
device and a SPACE parameter defining disk space.
You can also define a VOLSER parameter to direct
the data to a specific disk.

Overrides the TAPEPARM statement DISK/TAPE

parameter.

o SPACE=spacedef

No default.

Defines the space allocation parameter for a data

set defined with the DISK parameter. Specify this
parameter according to JCL language syntax.

Overrides the TAPEPARM statement SPACE= parameter.

o VOLSER=volser

No default.

Defines the volume serial number of a disk for a

data set defined with the DISK parameter. Specify

478 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

this parameter according to JCL language syntax.

Overrides the TAPEPARM statement VOLSER= parameter.

Chapter 7: PARAMETERS 479

7.3 Unit Level Parameters

7.3.1.4.5 DETAILTAPESMSPARM and TAPEfffSMS Statements

In prefix.MICS.PARMS(cccOPS), the optional DETAILTAPESMSPARM

and TAPEfffSMS statements allow you to specify System Managed
Storage (SMS) keywords (for example,STORCLAS=storclass) for
DETAIL tape data sets at the component and individual file
level, respectively.

DETAILTAPESMSPARM

When specified in prefix.MICS.PARMS(cccOPS), the

DETAILTAPESMSPARM parameter specifications override unit
level tape data set SMS defaults established by
TAPESMSPARM and DETAILTAPESMSPARM statements in
prefix.MICS.PARMS(JCLDEF).

Refer to chapter 2 of the CA MICS Planning,

Installation, Operations, and Maintenance Guide for unit
level TAPESMSPARM and DETAILTAPESMSPARM statements in
prefix.MICS.PARMS(JCLDEF).

The primary reason to include a DETAILTAPESMSPARM

statement in prefix.MICS.PARMS(cccOPS) is to specify
unique SMS parameters for the DETAIL tapes created for a
particular component (ccc).

For example, your site may want to direct the CA MICS

DETAIL tapes for a particular component (ccc) to a
unique storage class.

Sample DETAILTAPESMSPARM statement:

DETAILTAPESMSPARM STORCLAS=DTPCLASS

In this example, the JCL for all DETAIL tape data sets
for the component will include the SMS STORCLAS=DTPCLASS
assignment.

TAPEfffSMS

The TAPEfffSMS statement is only permitted in

prefix.MICS.PARMS(cccOPS). It is not supported in
prefix.MICS.PARMS(JCLDEF). TAPEfffSMS keyword
specifications override, for the indicated file, any SMS
related tape specifications made in
prefix.MICS.PARMS(JCLDEF) and prefix.MICS.PARMS(cccOPS)
with TAPESMSPARM or DETAILTAPESMSPARM statements.

The primary reason to include a TAPEfffSMS statement in

480 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

prefix.MICS.PARMS(cccOPS) is to specify unique SMS

parameters for a specific DETAIL tape file (fff).

Sample TAPEfffSMS statement:

TAPEfffSMS STORCLAS=fffCLASS

In this example, the JCL for the DETAIL tape data set
for file ffft will include the SMS STORCLAS=fffCLASS
assignment.

7.3.1.4.6 DETAIL Tape User Exits

A user exit is invoked just prior to the output of each

record to a DETAIL tape file. The exits are named
_USRTfff, where fff matches the file identifier for
the DETAIL tape file.

Refer to chapter 10 of this guide for a complete description

of the DETAIL tape user exits.

Chapter 7: PARAMETERS 481

7.3 Unit Level Parameters

7.3.1.4.7 Activating DETAIL Tape Checklist

___ 1. Add or modify the desired TAPEfff and TAPEfffSMS

statements in prefix.MICS.PARMS(cccOPS), where fff is
the three-character file identifier for the file to
be written to tape.

___ 2. Submit prefix.MICS.CNTL(cccPGEN).

___ 3. Edit prefix.MICS.PARMS(JCLGENU) so that it reads:

cccGDGGN DAILY

If Incremental Update is active, add this:

INCRccc

___ 4. Submit prefix.MICS.CNTL(JCLGENU) to regenerate the

JCL for DAILY and cccGDGGN.

Note: If you want to use specific JCL and SMS

parameter values for your DETAIL tape data sets, make
sure you have coded the appropriate DETAILTAPEPARM
and/or DETAILTAPESMSPARM statements in
prefix.MICS.PARMS(JCLDEF) for unit level, or
prefix.MICS.PARMS(cccOPS) for component level DETAIL
tape JCL parameters. Refer to the previous sections
for a detailed discussion on JCL parameters available
for DETAIL tape data sets.

___ 5. Submit prefix.MICS.CNTL(cccGDGGN) to define the tape

GDG.

Note: If you want to override the number of entries

kept in a GDG with cataloged data sets for a TAPEfff
file, you must delete and redefine the index with the
new limit for GDG entries. Follow the checklist in
section 3.5.6.3 of the PIOM.

___ 6. You have just activated DETAIL tape for one or more
database files. As mentioned in the DETAIL Tape
Processing Overview section, the choice to create
DETAIL tape files is independent of, and does not
affect the creation of DETAIL files in the unit
database.

If you are currently creating one or more cycles of

the files you just activated for DETAIL tape in your
unit prefix.MICS.DETAIL timespan, your DAILY update

482 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

job will continue to do so.

Now that you are creating DETAIL tape cycles for the
files, you may want to deactivate, or limit the
number of DETAIL cycles written to the unit DETAIL
timespan database.

The CA MICS System Modification Guide contains

instructions for changing the number of cycles of a
file as well as instructions for deactivation of the
DETAIL timespan of a file.

If you deactivate the files in the DETAIL timespan,

make sure you delete the existing cycles to free up
space in the prefix.MICS.DETAIL database. If you
reduce the number of cycles, make sure you delete any
existing cycles in prefix.MICS.DETAIL beyond the new
cycle limit.

The following JCL can be used to delete specific

cycles of a file from the DETAIL timespan. Make sure
to replace 'x' with the unit identifier:

a) Delete all cycles for file fff (01-nn)

//DELETE EXEC MICSDBx

//SYSIN DD *
PROC DATASETS DDNAME=%DDNx(TS=DETAIL);
DELETE cccfff01 cccfff02 ... cccfffnn ;
RUN;

b) Delete cycles 02, 03, and 04 for file fff:

//DELETE EXEC MICSDBx

//SYSIN DD *
PROC DATASETS DDNAME=%DDNx(TS=DETAIL);
DELETE cccfff02 cccfff03 cccfff04 ;
RUN;

Chapter 7: PARAMETERS 483

7.3 Unit Level Parameters

7.3.1.4.8 Deactivating DETAIL Tape Checklist

___ 1. Delete the desired TAPEfff and TAPEfffSMS statements

from prefix.MICS.PARMS(cccOPS).

___ 2. If there are no longer any TAPEfff statements in

prefix.MICS.PARMS(cccOPS), delete any DETAILTAPEPARM
and DETAILTAPESMSPARM statements.

___ 3. Submit prefix.MICS.CNTL(cccPGEN).

___ 4. Edit prefix.MICS.PARMS(JCLGENU) so that it reads:

DAILY

If Incremental Update is active, add this:

INCRccc

___ 5. Submit prefix.MICS.CNTL(JCLGENU) to regenerate the

JCL for the DAILY job.

___ 6. (Optional) Delete the index and the cataloged

datasets for each TAPEfff statements deleted in step
1.

484 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.1.5 Sample DB2OPS

Following is a sample of optional statements that may be

coded in prefix.MICS.PARMS(DB2OPS):

Figure 7-3. CA MICS DB2 Analyzer Definition Worksheet

Chapter 7: PARAMETERS 485

7.3 Unit Level Parameters

7.3.2 INPUTRDR and INPUTDB2 PARMS Members

The prefix.MICS.PARMS members INPUTRDR and INPUTccc are used
to specify the input data for the Data Integration
Application component step.

To determine whether INPUTccc or INPUTRDR or both are used,

review the DAYSMF, SMFRECORDING, and SMFDRCTR specifications
in prefix.MICS.PARMS(JCLDEF).

INPUTRDR INPUTccc

DAYSMF OFF NO YES

DAYSMF FILE(S) ... YES NO
SMFDIRECTOR NO YES
DAYSMF EXCLUDE ccc NO - See Note 1 YES

SMFRECORDING ccc YES See Note 2

When DAYSMF OFF is specified in JCLDEF, then the

prefix.MICS.PARMS(INPUTccc) member is used for each
component step.

When DAYSMF FILES PERMANENT or TEMPORARY is specified in

JCLDEF, the prefix.MICS.PARMS(INPUTRDR) member is used in
DAYSMF.

If there is only one SMF recording component in this unit,

DAYSMF will not be generated and the component step with
SMF input data will use the prefix.MICS.PARMS(INPUTRDR)
member.

NOTES:
If the use of DAYSMF EXCLUDE ccc results in only one
component remaining as DAYSMF eligible, DAYSMF will
automatically be deactivated. In this case, INPUTRDR will be
used as stated above.

Some components accept data from both SMF and non-SMF

sources, such as CIC and VCA. In this case, the component
may optionally input data from the INPUTRDR member, but will
always include the INPUTccc member.

For details on the DAYSMF parameters, see section 2.3.3.2.1,

JCL Option Definitions (JCLDEF) in the PIOM.

For details on deactivating DAYSMF, see section 5.10 in the

PIOM.

486 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

The following sections describe how to specify the input data

set JCL definitions.

1 - INPUTRDR PARMS Member JCL Definition

2 - INPUTDB2 PARMS Member JCL Definition

7.3.2.1 INPUTRDR PARMS Member JCL Definition

The INPUTRDR member of prefix.MICS.PARMS defines the DD

statements that specify the SMF input data for all products
in the units that use SMF data. The INPUTSMF DD statements
are used by the DAYSMF step, which reads and splits the SMF
data into separate files, one for each CA MICS product.

The INPUTRDR member defines the input SMF data sets when
DAYSMF FILES PERMANENT or TEMPORARY is specified in the
prefix.MICS.PARMS(JCLDEF) member.

An INPUTSMF DD statement is required for each SMF data

source. A worksheet for preparing the INPUTRDR member is
provided below. If you change the contents of the INPUTRDR
member, you must regenerate the CA MICS DAILY job using
either JCLGENU or JCLGEND in prefix.MICS.CNTL.

For example, if you want to read your SMF data from a data
set named SMF.DAILY.DATA, you would change the INPUTRDR
member to contain the name of the SMF data set as follows:

//INPUTSMF DD DISP=SHR,DSN=SMF.DAILY.DATA

If there is only one SMF recording component in this unit,

DAYSMF will not be generated and the component step with
SMF input data will use the prefix.MICS.PARMS(INPUTRDR)
member directly.

If DAYSMF has been deactivated by the DAYSMF OFF statement

specified in the prefix.MICS.PARMS(JCLDEF) member, then each
component step will read its input from their corresponding
prefix.MICS.PARMS(INPUTccc) member.

Chapter 7: PARAMETERS 487

7.3 Unit Level Parameters

+--------------------------------------------------------------------+
| INSTALLATION PREPARATION WORKSHEET: SMF Input DD Statements |
| |
| PARMS Library Member is INPUTRDR |
+--------------------------------------------------------------------+
| |
|This definition is required to specify the DD statement for SMF data|
|which will be read by the DAILY CA MICS job. |
| |
| //@ |
| //@ WARNING: ALWAYS MAKE CHANGES IN PARMS(INPUTRDR) AND NOT |
| //@ &CNTL(DAILY). |
| //@ CHANGES MADE TO &CNTL(DAILY) |
| //@ WILL BE GONE WHEN DAILY REGENERATED BY JCLGEN. |
| //@ |
| //INPUTSMF DD DISP=SHR,DCB=BUFNO=3,DSN=______________________ |
| // DD DISP=SHR,DCB=BUFNO=3,DSN=______________________ |
| |
| |
+--------------------------------------------------------------------+
Figure 7-3a. INPUTRDR JCL Definition Worksheet

488 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.2.2 INPUTDB2 PARMS Member JCL Definition

The INPUTDB2 member of prefix.MICS.PARMS contains the DD

statements to specify the input data for the CA MICS Analyzer
for DB2. The //INPUTSMF DD and, optionally, the //SMFDRCTR
DD statements are used by the DAY065 step of the DAILY job.

The INPUTDB2 member contains the input SMF data sets when ANY
of the following JCLDEF options is used:

o DAYSMF OFF is specified

o SMFDRCTR/SMFDIRECTOR DB2 is specified

o DAYSMF EXCLUDE DB2 is specified

A //INPUTSMF DD statement is required for each SMF data

source.

A //SMFDRCTR DD statement is only required when CA SMF

Director split indices are used.

A worksheet for preparing the INPUTDB2 member is provided

below in Figure 7-3b.

If you change the contents of the INPUTDB2 member, you must

regenerate the CA MICS DAILY job using either JCLGENU or
JCLGEND in prefix.MICS.CNTL.

NOTE: If your site has CA SMF Director installed, you can

use it to extract specific SMF record types and subtypes at
SMF dump time. For more details on this product feature see
section 6.5, CA MICS and CA SMF Director Interface, of this
guide.

Chapter 7: PARAMETERS 489

7.3 Unit Level Parameters

+--------------------------------------------------------------------------+
| INSTALLATION PREPARATION WORKSHEET: INPUTDB2 JCL Definitions |
| |
| PARMS Library Member is INPUTDB2 |
+--------------------------------------------------------------------------+
| |
| |
| This definition is required to specify the DD statement for data |
| that will be read by the DAILY CA MICS job. |
| |
| //@ |
| //@ WARNING: ALWAYS MAKE CHANGES IN PARMS(INPUTDB2) AND NOT |
| //@ &CNTL(DAILY). |
| //@ CHANGES MADE TO &CNTL(DAILY) |
| //@ WILL BE GONE WHEN DAILY REGENERATED BY JCLGEN. |
| //@ |
| //INPUTSMF DD DISP=SHR,DCB=BUFNO=5,DSN=___________ ____________ |
| // DD DISP=SHR,DCB=BUFNO=5,DSN=___________ ____________ |
| //@ |
| //SMFDRCTR DD DISP=SHR,DCB=BUFNO=5,DSN=___________ ____________ |
| // DD DISP=SHR,DCB=BUFNO=5,DSN=___________ ____________ |
| |
| |
| |
+--------------------------------------------------------------------------+

Figure 7-3b. INPUTDB2 JCL Definition Worksheet

7.3.3 Database Space Modeling (DBMODEL)

This section describes the information required to define the
Analyzer to the Database Space Modeling Facility.
Specifically, the user must provide values for the cycle
(data retention) definitions. The special considerations for
defining the FILE input statements to the Database Space
Modeling facility are discussed.

Section 2.3.4 of the PIOM, Database Space Modeling Facility,

explains how these values are used in estimating the DASD
requirements of the database, and how the user can input
these values to the modeling facility.

This section covers the following topics:

1 - Data Retention Specifications (FILE Statements)

490 Analyzer Option for DB2 Guide

7.3 Unit Level Parameters

7.3.3.1 Data Retention Specifications (FILE Statement)

This section describes cycle (data retention) definitions

required for the DB2 Analyzer, discusses how to determine the
DB2 data cycles required, and provides instructions for
completing the FILE statements in the PARMS member DBMODEL.

Database Data Retention Worksheet Definition

--------------------------------------------

Figure 7-4 provides a worksheet to define the different

retention limits for the online and archive database files.
The numbers shown on the worksheet reflect the default
retention values in prefix.MICS.PARMS(DBMODEL).

Use the worksheet to define your retention specifications,

which in turn will allow you to determine the appropriate
values for the modeling process.

Note that the DBMODEL worksheet shown here contains values

for this product only. For more information, see Section
2.3.4.1, Preparing the Modeling Input, in the CA MICS PIOM
Guide.

The worksheet is organized by information area. Each file in

the area is listed by name. For each file, a line is
formatted to allow six definitions in the online database and
two in the archive database:

o The online database files quantify the number of cycles of

data that will be maintained in the DETAIL, DAYS, WEEKS,
MONTHS, and YEARS timespans and the TABLES data area.

o The two definitions for the archive database files quantify

the number of cycles of data to be retained, up to the
cutoff limit defined. The archive definitions have no
impact on the size of the database and may be specified
whether or not the weekly and/or monthly archive history
files have actually been activated (see Section 2.3.3,
CA MICS JCL Planning and Parameters, of the PIOM).

The worksheet formats provide an underscored area for the

user's definition, followed by the recommended value, shown
within parentheses. If the underscored area contains a value
of 00, the file is not supported for the indicated timespan.
To add support, you must perform database tailoring as
described in Section 6.2, Tailoring the Database, of the
System Modification Guide (SMG).

Chapter 7: PARAMETERS 491

7.3 Unit Level Parameters

When specifying a retention limit, remember that the number

may never be zero if the file has been defined to be active
in the timespan.

DB2 Data Retention Definition

-----------------------------

The DB2 Analyzer is comprised of the DB2 Information Area and

its files. The FILE statements shown below specify the
default online and archive history retention limits for each
file. A complete description of the FILE statement is
provided in the PIOM, Section 2.3.4.1, Preparing the Modeling
Input.

+--------------------------------------------------------------------------+
| INSTALLATION PREPARATION WORKSHEET: Data Retention Specifications |
| |
| PARMS Library Member is DBMODEL |
| |
| Reference Sections: 7.3.3.1 CA MICS DB2 Analyzer Guide |
+------+-----------------------------------------------+-------------------+
| | Online Database Retention | Archive Cut-Off |
| File |DETAIL DAYS WEEKS MONTHS YEARS TABLES | WEEKS MONTHS |
| Name | | |
+------+-----------------------------------------------+-------------------+
|DB2DSY| __(07) __(33) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2_DS| __(01) 00(00) 00(00) 00(00) 0(0) 00(00) | 000(000) 000(000) |
|DB2DSD| __(07) __(33) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2_DD| __(01) 00(00) 00(00) 00(00) 0(0) 00(00) | 000(000) 000(000) |
|DB2DSU| __(07) __(33) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2DSP| __(07) __(33) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2DDY| __(03) __(15) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2_SH| __(01) 00(00) 00(00) 00(00) 0(0) 00(00) | 000(000) 000(000) |
|DB2DDP| __(03) __(15) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2DDU| __(03) __(15) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
|DB2DPP| __(07) __(33) __(09) __(06) _(1) 00(00) | ___(053) ___(024) |
+------+-----------------------------------------------+-------------------+
| ....5...10...15...20...25...30...35...40...45...50...55...60...65...70.. |
+--------------------------------------------------------------------------+

Figure 7-4. Data Retention Specification Worksheet

492 Analyzer Option for DB2 Guide

Chapter 8: INSTALLATION
You install the CA MICS Analyzer Option for DB2 by following
the instructions in the PIOM. Chapter 7 of this guide
provides instructions for the correct definition of the DB2
Analyzer parameters. The SYSID, SITE, ZONE, and other
parameter files that are used by more than one CA MICS
product are defined in Chapter 2 of the PIOM. Section 3.8 of
the PIOM provides step-by-step checklists that you must
follow to ensure a successful installation.

Chapter 8: INSTALLATION 493

Chapter 9: PROCESSING
This chapter describes a number of considerations for
operation of the DB2 Analyzer.

This section contains the following topics:

9.1 Processing Requirements (see page 496)
9.2 Collector Options And Operation (see page 497)
9.3 Data Integrity Considerations (see page 498)

Chapter 9: PROCESSING 495

9.1 Processing Requirements

CA MICS assumes that the SMF record collection (using
IFASMFDP) and processing (CA MICS DAILY job) occur daily.

The DB2 Analyzer can be installed either of two ways:

o In the same database unit as the CA MICS Batch and

Operations Analyzer to run with CA MICS SMF processing. In
this case the SMF file will be read only once.

o In a separate database unit. In this case both the Batch

and Operations Analyzer and the DB2 Analyzer read the
entire SMF file each day.

If it can be guaranteed that the Batch and Operations

Analyzer will execute before the DB2 Analyzer each day, it is
possible to have the Batch and Operations Analyzer extract
the Type 100 and 101 DB2 SMF records and leave these for
later processing by the DB2 Analyzer, thus speeding the Batch
and Operations Analyzer update.

To cause the Batch and Operations Analyzer to extract this

data, change the _USRSEL macro in
sharedprefix.MICS.SOURCE(#BASEXIT) to this:

MACRO _USRSEL
IF ROUTINE='INPUTRDR' AND
(SMFRTYPE EQ 100 OR SMFRTYPE EQ 101) THEN
USERFILE=1;
%

The SMF Type 100 and 101 records will be extracted and
written to prefix.MICS.USER.DATA, where "prefix" is the
prefix of the unit database for the Batch and Operations
Analyzer. This file will then be used as input to the DB2
Analyzer.

496 Analyzer Option for DB2 Guide

9.2 Collector Options And Operation

The collection of accounting type 101 and statistical type
101 data is optional with DB2. To obtain the maximum benefit
from the DB2 Analyzer, both record types should be collected.
To enable the collection of DB2 accounting and statistical
data:

1. Update the SMFPRMxx member of SYS1.PARMLIB by using a

utility such as IEBUPDTE. SMFPRM determines which
records SMF will allow to be written. Use SET SMFPRM=xx
to select the member dynamically and cause SMF to begin
logging DB2 records.

2. Do one of the following as appropriate:

a. During DB2 installation, use the ISPF installation

panels to choose accounting and statistics.

b. During an update to the DB2 installation parameters,

use the appropriate ISPF panel to specify that DB2
accounting and statistics data should be written to
SMF.

c. Activate the new SMFPRMxx member. To do this, re-IPL

the system specifying the member (SMF=xx) or use the
SET SMF=xx command.

3. Restart DB2 using the new installation parameters.

4. To prepare the SMF data for processing, dump the SMF

records to a sequential data set using the IFASMFDP
routine.

Chapter 9: PROCESSING 497

9.3 Data Integrity Considerations

The section of the DB2 Analyzer that reads the DB2
accounting and statistical records from the SMF file
incorporates a number of provisions for validating the
integrity of the SMF data:

o Record length checks

o Missing data checks
o Duplicate data checks
o Improper data combination checks

Messages are written to the SAS log if the DB2 Analyzer

detects any of these conditions.

In addition, the DB2 Analyzer detects the restart of DB2.

This is required for the proper calculation of data in the
DB2 System Activity and Data Base Activity files. The
procedure involves checking the sequence number of each DB2
SMF record.

It should be remembered that DB2 SMF data is not checkpointed

and is not preserved over a DB2 restart. If a restart
occurs, some data may be lost.

498 Analyzer Option for DB2 Guide

Chapter 10: MODIFICATION
The CA MICS Analyzer Option for DB2 is tailored, primarily,
through the use of options and parameters and, sometimes,
through the use of exits. Most of the customization is done
by following the standard procedures defined by the System
Modification Guide (SMG). This chapter does not repeat the
details already provided by the SMG. Instead, it provides
checklists to show you how to customize the DB2 Analyzer and
describes the exits that are available during daily update
processing.

This section contains the following topics:

10.1 Modification Checklists (see page 499)
10.2 Standard User Exits (see page 505)

10.1 Modification Checklists

This section provides checklists for tailoring the CA MICS
Analyzer Option for DB2. The following topics are discussed:

1 - Activate DB2 Plan Activity Files (DB2DSP, DB2DDP)

2 - Implement Incremental Update
3 - Alter the Active Timespans for a File

Chapter 10: MODIFICATION 499

10.1 Modification Checklists

10.1.1 Activate DB2 Plan Activity Files (DB2DSP, DB2DDP)

The DB2 Plan Activity Files, DB2DSP and DB2DDP, are optional
files created from a rename of the DB2DSU and DB2DDU files.
These files are distributed as active files. The procedure
to activate the DB2DSP and DB2DDP files is, therefore, needed
only if the files have been set to inactive.

To activate these files, use the following checklist:

___ 1. Save a copy of sharedprefix.MICS.GENLIB(DB2GENIN) in

sharedprefix.MICS.LOCALMOD.CNTL for recovery
purposes.

___ 2. Modify sharedprefix.MICS.GENLIB(DB2GENIN). If DDF

reporting is required, modify the OPTION statement as
follows:

OPTION DDF

Code the following FILE statement for the DB2DSP file

if the file will be turned on in the DETAIL, DAYS,
and MONTHS timespans:

FILE DSP 00 2 Y E N Y N N N N DB2 PLAN Activity File

Ensure the DDP FILE statement matches the DSP FILE

statement if DDF is selected on the OPTION statement.

Ensure all elements turned on in the DB2DSP and

DB2DDP files are also available at the DETAIL
timespan for DB2DSU and DB2DDP respectively. The
DB2DSU and DB2DDP timespan need NOT be active to
comply with this requirement.

___ 3. Submit the job in sharedprefix.MICS.CNTL(DB2CGEN).

___ 4. Move CA MICS parameter library members that are

dependent on the components installed in this
database unit.

Submit prefix.MICS.CNTL(COPYLIBU)

___ 5. Review the definitions in prefix.MICS.PARMS(DBMODEL).

Modify the cycle retention number to match the file
status in each timespan. For example, at least one
cycle is retained for the DETAIL timespan for the
files you activated. See Section 7.3.3 of this guide
for details on DBMODEL definitions.

500 Analyzer Option for DB2 Guide

10.1 Modification Checklists

___ 6. Submit the job in prefix.MICS.CNTL(CYCLEGEN).

Chapter 10: MODIFICATION 501

10.1 Modification Checklists

10.1.2 Implement Incremental Update

If you are using the TAPEfff exit to collect detail-level
data, and incremental update is active, you may need to make
a few simple but very important adjustments to your exits or
options to accommodate the way that incremental update
processes data.

This section discusses the following:

o TAPEfff option considerations with incremental update

TAPEfff OPTION CONSIDERATIONS WITH INCREMENTAL UPDATE

The TAPEfff option allows the creation of DETAIL timespan

tape files for certain high volume files.

Without incremental update, a single DETAIL timespan tape

file is created for TAPEfff activated files during the
DAILY run. The general practice is to use GDGs so that the
(+0) tape volume contains yesterday's data, (-1) contains
the prior day's data, and so on.

With incremental update activated, a tape is created with

each execution of an incremental update as well as a final
tape during the DAILY update run. For example, three
incremental updates followed by a final daily update run
result in a total of four tapes created, one for each
TAPEfff activated file. Each tape contains only the detail
data encountered during the individual incremental update
or daily run. If you are employing GDGs you will want to
consider increasing the number of generations to encompass
the desired time range of history. For example, if
previously 7 "daily" generations were maintained and you
run 4 increments per day, you may wish to expand the
generations kept to 28 (7 times 4 updates per day).

The use of fewer tapes in a single update under the

incremental feature expedites processing. In addition, due
to the "special study" nature of the data, separation into
multiple pieces representing period time slices should
allow usage to be more direct. That is, the data is
already subset to the period contained within the update.

You also may consider creating a standalone job to

consolidate these individual tapes into a single one after
the DAILY job completes if you prefer to have a single tape
data set contain all transactions for the time range.

502 Analyzer Option for DB2 Guide

10.1 Modification Checklists

10.1.3 Alter the Active Timespans for a File

For each DB2 Information Area file, there is a corresponding
FILE statement in sharedprefix.MICS.GENLIB(DB2GENIN). The
FILE statement defines the file name, the file type, the file
status (active or inactive) in each timespan, and the file
status for archive (audit and history collection).

Note: If incremental update is active, be sure to review

Section 10.1.2 of this guide before using the TAPEfff option
or USRXfff exits.

The USRXfff exits are coded in the #DB2EXIT member of the

sharedprefix.MICS.SOURCE library. They use the %FXIT
technique, which is described in section 10.2.3 of this
guide, as well as in Section 4.3.1.2 of the SMG.

Because the DB2DSP, DB2DSU, DB2DPP, DB2DDU, DB2DDP, DBPDBU,

and DBPDBP files contain large amounts of data at the DETAIL
timespan, the CA MICS Analyzer Option for DB2 provides the
TAPEDSP, TAPEDSU, TAPEDPP, TAPEDDU, TAPEDDP, TAPEDBU, and
TAPEDBP options, which allow you to write the DETAIL timespan
data to tape rather than DASD. You do not need to code the
USRXfff exit to use the TAPEfff options. For more
information about the TAPEfff options, refer to Section
7.3.1.4.3 in this guide.

IMPORTANT *********

* *
* If incremental update is active, be sure to *
* review the important considerations in Section *
* 10.1.2 of this guide before using the TAPEfff *
* option or USRXfff exits. *
* *
****************** IMPORTANT ***************************

+-----------------------------------------------+
|To ... | use checklist... |
|-------------------------+---------------------|
|activate the TAPEfff | |
| options... | 3.1, which follows. |
+-----------------------------------------------+

*****************************************************
* *
* Checklist 3.1 - Activate the TAPEfff Options *
* *
* If incremental update is active, be sure to *
* review the considerations in Section 10.1.2. *

Chapter 10: MODIFICATION 503

10.1 Modification Checklists

* *
*****************************************************

___ 1. Make a backup copy of all complex and unit level

libraries in the complex.

___ 2. Review the descriptions of the FILE statement

provided in Section 4.2.4.2.1 of the SMG.

****************************************************
* Repeat the following steps for each database *
* unit containing the CA MICS Analyzer Option *
* for DB2. *
****************************************************

___ 3. Edit prefix.MICS.PARMS(DB2OPS) and add the following

statements anywhere in the member:

TAPEDSP--to write the DETAIL.DB2DSP01 file to tape

TAPEDSU--to write the DETAIL.DB2DSU01 file to tape
TAPEDPP--to write the DETAIL.DB2DPP01 file to tape
TAPEDDU--to write the DETAIL.DB2DDU01 file to tape
TAPEDDP--to write the DETAIL.DB2DDP01 file to tape
TAPEDBU--to write the DETAIL.DBPDBU01 file to tape
TAPEDBP--to write the DETAIL.DBPDBP01 file to tape
WORK--to set the number of work data set pairs to use
when processing DETAIL transactions for each
intermediate work file

___ 4. Submit prefix.MICS.CNTL(DB2PGEN).

___ 5. Edit prefix.MICS.PARMS(JCLGENU) so that it reads:

DB2GDGGN DAILY

___ 6. Submit prefix.MICS.CNTL(JCLGENU) to regenerate the

JCL for DAILY and DB2GDGGN.

___ 7. Submit prefix.MICS.CNTL(DB2GDGGN) to define the tape

GDG.

Note: If your site already uses the TAPEfff options

for other files, DB2GDGGN will complete with
condition code 12. Examine the output from the
IDCAMS step to verify that a GDG entry has been
successfully created for the selected file.

504 Analyzer Option for DB2 Guide

10.2 Standard User Exits

Before implementing an exit, determine whether the required
modification can be accomplished by parameter modification or
file tailoring.

At times, additional system customization is needed to tailor

CA MICS to your site. There are many user exit points
provided within CA MICS. Each of these points corresponds to
a position in the CA MICS logic where user modification:

o Is likely to occur, based on our experience

o Presents only a slight possibility of compromising the

CA MICS database or operational integrity

o Is relatively easy to document and understand

Using the CA MICS exit facilities to augment CA MICS

processing logic is the safest method of system modification.
Generally, you have four methods with which to augment,
change, and enhance CA MICS.

o CA MICS standard option and parameter definitions

The diverse installation and definition options provide

most users with adequate provisions for customizing
CA MICS.

o Modification through user exits

Often there may be site-dependent requirements that are

not adequately addressed through the standard options
and parameters. In these cases, one or more of the
user exits provided with CA MICS may be used to insert
user-written routines that satisfy the requirements.

o Extension through field developed applications

Although most users do not initially consider this a

way of modifying a standard CA MICS product, the
development of field developed applications may be the
most advantageous method. For example, often it may be
better to write a field developed application to handle
additional SMF data than to attempt to modify the logic
of the CA MICS DB2 Analyzer.

o System code modification

Chapter 10: MODIFICATION 505

10.2 Standard User Exits

As a final option, you may be able to satisfy your

site's requirements by implementing a source code
change.

GENERAL EXIT CONSIDERATIONS

You should carefully explore whether you need to develop a

user exit routine. First, ensure that the requirement cannot
be satisfied through one of the standard options or
definitions by discussing your requirement with CA Technical
Support.

Designing, coding, testing, and implementing a CA MICS user

exit routine should be done carefully, since any resulting
errors may corrupt the data. You should be meticulous in the
definition and validation of the exit routines to ensure that
system integrity and performance are not adversely affected.

If an exit must be used, refer to Chapter 9 of this guide for

a description of the location of the exit in the DAILY
update. For a better understanding of CA MICS user exits,
see Section 4.3 of the System Modification Guide.

Product exits are classified according to their purpose and

include product input, output, parameter-related, and
accounting exits. Input exits are invoked as the raw input
records are read. Output exits are invoked just before
CA MICS writes an observation to the CA MICS database.

The DB2 Analyzer provides the input exit _USRSEL. You can
use this exit to select or exclude input data that meets
special site-defined criteria, add data elements, or modify
record fields as they are read.

One output exit routine is provided for each product file.

You can use this output exit routine to selectively block the
writing of specified records, alter data elements in the
records, or produce additional records for the target file or
a user-defined file.

The product parameter-related exits are also user exits, but

they are defined as part of the standard CA MICS installation
process. They are normally associated with other parameters
or options. For example, the Account Code Derivation Routine
is a user exit routine for completing values for account
codes that were defined in the separate but related DB2ACRT
member of sharedprefix.MICS.PARMS. DB2ACRT is the Account
Code Definition parameter member. These exits are identified

506 Analyzer Option for DB2 Guide

10.2 Standard User Exits

in this chapter, but they are described in detail in Chapter

The user exits for the DB2 Analyzer are discussed in detail
in the following sections:

1 - Input Exits
2 - Parameter-Related Exits
3 - Output Exits

Chapter 10: MODIFICATION 507

10.2 Standard User Exits

10.2.1 Input Exits

This section provides a description of the input exit that is
shared by DB2 with the other installed CA MICS products.

The exit description includes the name and title, a

description of its purpose, when it is invoked, and whether
it has an interface to CA MICS Accounting and Chargeback. It
also shows which data elements are available, the special
considerations to note, and a sample user exit.

+-------------+
| U S R S E L | Input Record Selection Exit (USRSEL)
+-------------+

DESCRIPTION: The _USRSEL exit allows you to reject records

from being processed by the CA MICS Analyzer Option for DB2
during the DB2 input format routine. It is similarly invoked
in input format routines for other CA MICS products. It can
be defined at the complex level in
sharedprefix.MICS.SOURCE(#BASEXIT) or at the unit level in
prefix.MICS.USER.SOURCE(#BASEXIT).

INVOCATION: The _USRSEL exit gains control during the input

format routine in the DAY065 step of the DAILY job. It is
invoked for each input record processed from SMF.

ACCOUNTING INTERFACE: No interface is provided.

USES: This exit can be used to exclude records from being

processed by the CA MICS Analyzer Option for DB2 during the
daily input step. To exclude a record, set SKIP_REC to one.
For example, you can code the following to skip records that
contain the SMF system ID "TEST":

MACRO _USRSEL;
IF ROUTINE EQ 'DYDB2FMT' THEN DO;
IF ORGSYSID EQ 'TEST' THEN SKIP_REC=1;
END;
%

The CA MICS Analyzer Option for DB2 provides the appropriate

logic to delete the record based on the value of SKIP-REC
after the _USRSEL exit is invoked.

ELEMENTS AVAILABLE: ORGSYSID - Original System ID

CODING RESTRICTIONS: Do not refer to any CA MICS-assigned

508 Analyzer Option for DB2 Guide

10.2 Standard User Exits

data elements such as DB2ID and DB2ACTx when setting SKIP_REC

in this exit. Extra records will be deleted as a result.
For additional coding restrictions, refer to the SMG, Section
4.3.2.1.

+---------------+
| U S R S D B 2 | Input Record Selection Exit (DB2SEL)
+---------------+

DESCRIPTION: The USRSDB2 exit allows you to reject records

from being processed by the CA MICS Analyzer Option for DB2
during the DB2 input format routine. It is ONLY invoked in
CA MICS DB2 format routine. It can be defined at the complex
level in sharedprefix.MICS.SOURCE(#DB2EXIT) or at the unit
level in prefix.MICS.USER.SOURCE(#DB2EXIT).

INVOCATION: The USRSDB2 exit gains control during the input

format routine in the DAY065 step of the CA MICS DAILY job
following the decode of the DB2 header information from an
input SMF log record. Elements available at the point of
this exit are listed below, after the sample exit. It is
invoked for each DB2 input record processed from SMF.

ACCOUNTING INTERFACE: No interface is provided.

USES: This exit can be used to exclude records from being

processed during the daily input step based on distributed
thread type, user ID, plan ID, transaction, and facility ID.
To exclude a record, set SKIP_REC to one. For example, you
can code the following to skip records that contain the
DB2PLAN, LOOPER:

IF DB2PLAN EQ 'LOOPER' THEN SKIP_REC=1;

The CA MICS Analyzer Option for DB2 provides the appropriate

logic to delete the record based on the value of SKIP-REC
after the USRSDB2 exit is invoked.

ELEMENTS AVAILABLE:

ORGSYSID - Original System ID

ENDTS - SMF Time stamp
DB2RMID - DB2 Resource Manager ID
DB2IFCID - Instrumentation Facility ID
DB2RELN - DB2 Release Number
DB2ACE - DB2 Agent Control Element (ACE) ID
DB2ID - DB2 Subsystem ID
DB2STCK - Time Stamp

Chapter 10: MODIFICATION 509

10.2 Standard User Exits

DB2LOCN - Location ID
DB2AUTH - Primary Authid
DB2CORR - Job name
DB2CONN - DB2 Facility ID (TSO, CICS, IMS)
DB2PLAN - DB2 Plan name
DB2OPID - DB2 OPERATOR ID
DB2NETID - NETWORK ID
DB2LUNAM - DDF LU NAME
DB2UNIQ - DDF INSTANCE NUMBER
DB2DDFCT - DDF COMMIT COUNT
DB2REQID - Remote Requesting Location Id
DB2THDTY - Distributed Thread Type

510 Analyzer Option for DB2 Guide

10.2 Standard User Exits

10.2.2 Parameter-Related Exits

This section identifies the DB2 parameter-related exits you
define at product installation. Detailed descriptions of
these exits are presented in Chapter 7 of this guide.

+---------------+
| D B 2 A C R T | DB2 Account Code Derivation Exit
+---------------+

DESCRIPTION: The DB2ACRT exit derives the value of the

account code elements defined in
sharedprefix.MICS.PARMS(DB2ACCT). It is a complex-level exit
(it resides in the same library as DB2ACCT) and its
definition applies to all data base units in which the DB2
Analyzer is installed.

INVOCATION: The DB2ACRT exit gains control during the input

format routine of the daily update process step DAY065.
It is invoked once for each detail transaction record
processed by the DB2 Analyzer.

ACCOUNTING INTERFACE: No interface is provided.

USES: This exit sets the value of the DB2ACTx variables.

ELEMENTS AVAILABLE: All DETAIL time-span elements of the

files are available.

CODING RESTRICTIONS: Refer to Section 7.1 of this guide.

SPECIAL NOTES: The exit code is contained in

sharedprefix.MICS.PARMS(DB2ACRT).

SAMPLE USER EXIT: See Section 7.1 for a sample exit.

Chapter 10: MODIFICATION 511

10.2 Standard User Exits

10.2.3 Output Exits

Output exits are invoked just prior to adding the observation
to the DETAIL timespan of the file. These exits can be used
to modify the value of elements or prevent selected
observations from being added. In addition, the CA MICS
Analyzer Option for DB2 provides two special exits to output
detail data to a user-defined data set. These exits specify
user data set names and the length, formats, and labels
associated with the data set.

+----------------+
| U S R S f f f | DB2 File Selection Exit
+----------------+

DESCRIPTION: The USRSfff exit provides the ability to modify

or select observations immediately prior to output. The
files available (iiifff) are DB2DDY, DB2DDP, DB2DDU, DB2DSP,
DB2DSU, DB2DSY, DB2DSD, DB2DPP, DBPDBU, and DBPDSB.

INVOCATION: These exits are invoked in the information area

processing phase immediately before output of the file.

ACCOUNTING INTERFACE: No interface is provided.

USES: The exit allows elements to be modified and

observations to be excluded from the output file. To exclude
an observation, set SKIP_REC to one (1).

ELEMENTS AVAILABLE: All elements in the file are available.

Example:

sharedprefix.MICS.SOURCE(#DB2EXIT):

%LET USRSDPP = PACKAGE ;

prefix.MICS.USER.SOURCE(PACKAGE):

IF DB2PKNM EQ: 'ACCUMACC' THEN ;

ELSE DB2PKNM=QPACSLOC !! QPACSCOL ;

In this example, DB2PKNM was redefined as a concatenation of

QPACSLOC and QPACSCOL raw SMF101-1 elements of the QPAC or
PACKAGE section. Note that DB2PKNM is, by default, defined
by concatenating QPACLOCN, QPACCOLN, QPACPKID, and QPACCONT
variables of the QPAC section.

512 Analyzer Option for DB2 Guide

10.2 Standard User Exits

Member PACKAGE was created in the unit level

prefix.MICS.USER.SOURCE library for the unit where DB2PKNM is
to be redefined for the DB2DPP file.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* THIS IS IMPORTANT: *
* *
* The USRSDPP exit cannot access the QPACxxxx variables *
* unless they are made available within the following *
* macro definition in sharedprefix.MICS.SOURCE(#DB2EXIT): *
* *
* %MACRO DB2QPAC; *
* /* QPACLOCN */ *
* /* QPACCOLN */ *
* /* QPACPKID */ *
* /* QPACCONT */ *
* /* QPACSLOC */ *
* /* QPACSCOL */ *
* /* QPACSPKI */ *
* /* LQPACLOC */ *
* /* LQPACCOL */ *
* /* LQPACPKI */ *
* %MEND DB2QPAC; *
* *
* Uncomment only those variables that you need since they *
* impose overhead on the CA MICS DAILY and Incremental *
* updates. The variable names and their descriptions are *
* as follow: *
* *
* QPACLOCN - QPACLOCN Work Variable Long Form *
* QPACCOLN - QPACCOLN Work Variable Long Form *
* QPACPKID - QPACPKID Work Variable Long Form *
* QPACSLOC - QPACSLOC Work Variable Short Form *
* QPACSCOL - QPACSCOL Work Variable Short Form *
* QPACSPKI - QPACSPKI Work Variable Short Form *
* QPACCONT - QPACCONT Work Variable *
* LQPACLOC - QPACLOCN Length for Long Form *
* LQPACCOL - QPACCOLN Length for Long Form *
* LQPACPKI - QPACPKID Length for Long Form *
* *
* Those that are designated as long form are each of length *
* 128. The last three variables are numeric variables *
* that indicate how much of their respective long form *
* variables are actually populated. The long form variables*
* are available for DB2 V8.1 and above. *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Chapter 10: MODIFICATION 513

10.2 Standard User Exits

CODING RESTRICTIONS: This exit must not issue the RETURN or

DELETE statements, nor use a subsetting IF since its
invocation assumes the entire DATA step will be executed.
Refer to the SMG, Section 4.3.1.2, for more information.

+----------------+
| U S R D f f f | DB2 User-written Cost Derivation Exit
+----------------+

DESCRIPTION: The USRDfff exit lets you provide the

derivation of the fffCOST data element. The files available
(fff) are the DB2DSU, DB2DDU, DB2DSP, DB2DDP, and DB2DPP
files.

INVOCATION: These exits are invoked in the information area

processing phase immediately before output of the file.

ACCOUNTING INTERFACE: No interface is provided.

USES: The exit allows elements to be passed to the routine

computing the value of fffCOST.

ELEMENTS AVAILABLE: All elements in the file are available.

+----------------+
| U S R X f f f | DB2 Detail Data Exit
+----------------+

*************************************************************
* *
* Note: If incremental update is active, be sure to *
* review the important considerations in Section 10.1.2 *
* of this guide before coding USRXfff exits. *
* *
*************************************************************

DESCRIPTION: The USRXfff exit can be used to create a file

in the DETAIL timespan when the DETAIL timespan is inactive
on the FILE statement in sharedprefix.MICS.GENLIB(DB2GENIN).
In this case, the exit contains the entire SAS data block
that writes the DETAIL timespan for the fff file. When the
DETAIL timespan is active on the FILE statement in
sharedprefix.MICS.GENLIB(DB2GENIN), the USRXfff exit is
restricted to modifying or deleting observations in the
DETAIL timespan. To exclude an observation, set SKIP_REC to
one (1). In any case, the USRXfff exit is available for the

514 Analyzer Option for DB2 Guide

10.2 Standard User Exits

files DB2DSU, DB2DDU, DB2DSP, DB2DDP, DB2DPP, DBPDBU, and

DBPDBP.

INVOCATION: This exit is invoked in the code that processes

detail DB2 transaction data after a sort of the detail data
into the detail DB2fff file sequence and before the data is
summarized to the DAYS level.

ACCOUNTING INTERFACE: No interface is provided.

USES: The exit allows a DETAIL timespan file to be created

when it is not coded as active on the FILE statement in the
sharedprefix.MICS.GENLIB(DB2GENIN). In any case, the exit
allows elements to be modified and observations to be
excluded from the output file.

ELEMENTS AVAILABLE: All elements in the file are available.

CODING RESTRICTIONS: Refer to the System Modification Guide,

Section 4.3.1.2.

Example:

Below USRXfff exit routine excludes observations with missing

DSUREQID value:

MACRO _USRXDSU
SELECT( DSUREQID ) ;
WHEN( MISSING( DSUREQID ) ) SKIP_REC=ONE ;
OTHERWISE;
END;
%

+----------------+
| U S R T f f f | DETAIL Tape Data Selection Exit
+----------------+

DESCRIPTION: The USRTfff exits provide access to DETAIL file

records prior to their output to DETAIL tape data sets.
Refer to Chapter 7 of this guide for information about DETAIL
tape processing and a list of eligible component files.

INVOCATION: The USRTfff exit is invoked prior to output to

DETAIL tape files.

ACCOUNTING INTERFACE: No interface is provided.

USES: Use this exit to limit the amount of data that is

written to DETAIL tape files, or to modify the contents of

Chapter 10: MODIFICATION 515

10.2 Standard User Exits

data elements written to DETAIL tape files. Note that

USRTfff exit code only affects the DETAIL tape file content
for a particular file (fff). It has no impact on the normal
unit database content for the same file (fff).

ELEMENTS AVAILABLE: All elements in the DETAIL timespan of

the file.

ACTIVATION: The USRTfff exits are invoked using the indirect

exit convention described in Section 4.3.1.2 of the SMG.

All of the USRTfff indirect exits are activated in

sharedprefix.MICS.SOURCE(#cccEXIT). In #cccEXIT, you will
find the following statement for each file (fff) eligible for
DETAIL tape:

%LET USRTfff = ;

The exit is activated by providing a member name to the right

of the equal sign:

%LET USRTfff = exitname ;

If you code an exitname, you MUST create a member in each

unit's prefix.MICS.USER.SOURCE library with that name.
Provide valid SAS code in the member. This code will be
invoked prior to the output of records to the DETAIL tape
file.

Example:

sharedprefix.MICS.SOURCE(#DB2EXIT):

%LET USRTDSU = DSUTEXIT ;

prefix.MICS.USER.SOURCE(DSUTEXIT):

IF DB2ID NE 'RGN1' THEN SKIP_REC=1 ;

In this example, DSUTEXIT was chosen as the name for the

DETAIL tape exit for the DB2DSU file. Member DSUTEXIT was
created in the unit level prefix.MICS.USER.SOURCE library for
each unit where DETAIL tape was activated for the DB2DSU
file.

The exit was coded to limit the records written to the DETAIL
tape file to those from a particular DB2 region, RGN1.

Note that the exit member name must be identical in each

516 Analyzer Option for DB2 Guide

10.2 Standard User Exits

unit's prefix.MICS.USER.SOURCE library, but the contents of

each member can be different (or identical) for each unit.

CODING RESTRICTIONS: Ensure that you have activated DETAIL

tape processing for a file, and executed cccPGEN prior to
activating and coding USRTfff exits.

+----------------+
| U S R U J f f | Accounting & Chargeback Exits
| D B 2 J f f f |
+----------------+

DESCRIPTION: These exits provide the linkage into CA MICS

Accounting and Chargeback. The files available (fff) are the
DB2DSU, DB2DDU, and DB2DPP files.

INVOCATION: These exits are invoked in the daily

summarization #fffDSUM routines, where fff is DSU, DDU, or
DPP as the data is summarized at the DAYS timespan.

ACCOUNTING INTERFACE: These exits provide the interface to

Accounting and Chargeback.

USES: The exit allows elements to be passed to Accounting

and Chargeback.

ELEMENTS AVAILABLE: All elements in the file are available.

CODING RESTRICTIONS: Refer to Section 4.3.1.1 of the SMG.

Chapter 10: MODIFICATION 517

Appendix A: MESSAGES

Appendix A: MESSAGES 519

10.2 Standard User Exits

This appendix lists the messages generated by the CA MICS DB2

Analyzer. Some messages are printed on both the MICSLOG and
SAS log data sets. When reviewing the output of a job, first
look at the MICSLOG data set, because it will contain fewer
lines of information, thus making it easier to see whether or
not a job or job step completed as expected. If the MICSLOG
message does not provide enough information, consult this
appendix for more information. The messages are listed in
ascending numerical sequence and include the full text of the
message, the type, the reason for the message, appropriate
user action, and applicable references to documentation. If
you still need more information, consult the SAS log to help
debug the problem.

The following type codes are used to categorize the messages:

Information Designates a note that documents a CA MICS

option or potentially important feature in
the data.

Warning Designates a condition in either the date or

the control statements that does not affect
CA MICS DB2 Analyzer operation, but that may
lead to unexpected results.

Error Designates that a problem has been

encountered with a control statement that
will prevent a successful run of the
product. Execution is stopped after all
control statements are processed.

The message text often includes references to information

that is contained in a control statement or values of
permanent or temporary variables created during CA MICS
processing. In the description below, the message text
contains a word beginning with a percent sign (%), which
indicates that a value will be substituted into the text at
execution time. For example, message DB200037 reads as
follows:

>>>>> INPUT PROCESSING ERROR

DB2 VERSION %XREL IS NOT SUPPORTED. INPUT RECORD WITH
DB2ID = %DB2ID AND END TIME STAMP = %XENDTS
HAS BEEN REJECTED.

A possible version of the printed message in the MICSLOG

might be:

520 Analyzer Option for DB2 Guide

10.2 Standard User Exits

>>>>> INPUT PROCESSING ERROR

DB2 VERSION 9.5 IS NOT SUPPORTED. INPUT RECORD WITH
DB2ID = D95A AND END TIME STAMP = 29SEP04:15:47:35.00
HAS BEEN REJECTED.

+------------+
| DB200001 |
+------------+

TEXT: >>>>> FIRST INPUT TIMESTAMP THIS RUN=%XENDTS FROM

SYSTEM %ORGSYSID.

TYPE: Information

REASON: List the first input timestamp.

ACTION: None

REFERENCES: None

+------------+
| DB200002 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - PRODUCT SECTION %QWS00PSN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Product sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200003 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - ADDRESS SPACE SECTION %QWS00R1N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

Appendix A: MESSAGES 521

10.2 Standard User Exits

REASON: Incorrect number of Address Space sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200004 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - INSTRUMENTATION SECTION %QWS00R2N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Instrumentation sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200005 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - IFCID SECTION %QWS00R3N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of IFCID sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200006 |
+------------+

522 Analyzer Option for DB2 Guide

10.2 Standard User Exits

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - SYSTEM SERVICES SECTION %QWS00R4N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of System Services sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200007 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - COMMAND SECTION %QWS00R5N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Command sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200008 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - LATCH MANAGER SECTION %QWS00R7N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Latch Manager sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

Appendix A: MESSAGES 523

10.2 Standard User Exits

+------------+
| DB200009 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - RECORD AGENT SECTION %QWS00R8N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Record Agent sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200010 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - STORAGE MANAGER SECTION %QWS00R9N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Storage Manager sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200011 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - TRACE SECTION %QWS00RAN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Trace sections.

524 Analyzer Option for DB2 Guide

10.2 Standard User Exits

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200012 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - LOG MANAGER SECTION %QWS00RBN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Log Manager sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200013 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - PRODUCT SECTION %QWS10PSN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Product sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200014 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - SQL STATEMENT SECTION

Appendix A: MESSAGES 525

10.2 Standard User Exits

%QWS10R1N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of SQL Statement sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200015 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - RECORD BIND SECTION %QWS10R2N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Record Bind sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200016 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - BUFFER MANAGER SECTION
%QWS10R3N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Buffer Manager sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

526 Analyzer Option for DB2 Guide

10.2 Standard User Exits

+------------+
| DB200017 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - DATA MANAGER SECTION %QWS10R4N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Data Manager sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200018 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - PRODUCT SECTION %QWA01PSN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Product sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200019 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - INSTRUMENTATION SECTION
%QWA01R1N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

Appendix A: MESSAGES 527

10.2 Standard User Exits

REASON: Incorrect number of Instrumentation sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200020 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - SQL STATEMENT SECTION
%QWA01R2N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of SQL Statement sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200021 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - BUFFER MANAGER SECTION
%QWA01R3N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Buffer Manager sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200022 |
+------------+

528 Analyzer Option for DB2 Guide

10.2 Standard User Exits

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - RECORD LOCK SECTION %QWA01R4N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Record Lock sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200023 |
+------------+

TEXT: >>>>> LAST INPUT TIMESTAMP THIS RUN=%LASTTME FROM

SYSTEM %ORGSYSID

TYPE: Information

REASON: List the last input timestamp.

ACTION: None

REFERENCES: None

+------------+
| DB200024 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - IFC CHECKPOINT SECTION %QWS00R6N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of IFC Checkpoint sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

Appendix A: MESSAGES 529

10.2 Standard User Exits

+------------+
| DB200025 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - RECORD LOCK SECTION %QWS10R5N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of Record Lock sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200026 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - EDM SECTION %QWS10R6N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of EDM sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200027 |
+------------+

TEXT: >>>>> THE FIRST DB2DSY RECORD PROCESSED FOR DB2ID

= %DB2ID END TIME STAMP = %XENDTS HAD A SEQUENCE
NUMBER OF %DSYISEQ. THIS OBSERVATION WILL BE
WRITTEN WITH MISSING VALUES >>>>>

TYPE: Information

REASON: The first value for DSYISEQ is not 1.

ACTION: Ensure that SMF records are not missing.

530 Analyzer Option for DB2 Guide

10.2 Standard User Exits

REFERENCES: None

+------------+
| DB200028 |
+------------+

TEXT: >>>>> THE PRIOR DB2DSY RECORD PROCESSED FROM

DB2ID = %LAGDB2ID WITH AN END TIME STAMP =
%XLAGENDT HAD A %SEQDIF INTERVAL DIFFERENCE FROM
THE CURRENT RECORD BEING PROCESSED DB2ID = %DB2ID
END TIME STAMP = %XENDTS. THIS RECORD WILL BE
WRITTEN AS AN ACCUMULATED OBSERVATION IN THE
DB2DSY FILE.

TYPE: Information

REASON: There is a difference between the current

sequence number DSYISEQ and the prior sequence
number LAGISEQ that is greater than 1.

ACTION: Ensure that SMF records are not missing.

REFERENCES: None

+------------+
| DB200029 |
+------------+

TEXT: >>>>> MISSING DB2DSY DATA AFTER DB2 SYSTEM

RESTART. THE CURRENT RECORD DB2ID = %DB2ID END
TIME STAMP = %XENDTS WILL BE WRITTEN AS AN
ACCUMULATED OBSERVATION.

TYPE: Information

REASON: SMF data is missing after a DB2 subsystem

restart.

ACTION: Ensure that SMF records are not missing.

REFERENCES: None

+------------+
| DB200030 |

Appendix A: MESSAGES 531

10.2 Standard User Exits

+------------+

TEXT: >>>>> THERE IS MORE THAN A ONE DAY DIFFERENCE

BETWEEN THE PRIOR DB2DSY RECORD PROCESSED DB2ID =
%LAGDB2ID END TIME STAMP = %XLAGENDT AND THE
CURRENT RECORD BEING PROCESSED DB2ID = %DB2ID END
TIME STAMP = %XENDTS. THIS OBSERVATION WILL BE
WRITTEN WITH MISSING VALUES >>>>>

TYPE: Information

REASON: There is more than a one-day difference between

the end timestamps of the current and prior
records.

ACTION: Ensure that SMF records are not missing.

REFERENCES: None

+------------+
| DB200031 |
+------------+

TEXT: >>>>> THE FIRST DB2DSD RECORD PROCESSED FOR DB2ID

= %DB2ID END TIME STAMP = %XENDTS HAD A SEQUENCE
NUMBER OF %DB2ISEQ. THIS OBSERVATION WILL BE
WRITTEN WITH MISSING VALUES >>>>>

TYPE: Information

REASON: The first value for DSDISEQ is not 1.

ACTION: Ensure that SMF records are not missing.

REFERENCES: None

+------------+
| DB200032 |
+------------+

TEXT: >>>>> THE PRIOR DB2DSD RECORD PROCESSED FROM

DB2ID = %LAGDB2ID WITH AN END TIME STAMP =
%XLAGENDT HAD A %SEQDIF INTERVAL DIFFERENCE FROM
THE CURRENT RECORD BEING PROCESSED DB2ID = %DB2ID
END TIME STAMP =%XENDTS. THIS RECORD WILL BE
WRITTEN AS AN ACCUMULATED OBSERVATION IN THE
DB2DSD FILE

532 Analyzer Option for DB2 Guide

10.2 Standard User Exits

TYPE: Information

REASON: There is a difference between the current

sequence number DSDISEQ and the prior sequence
number LAGISEQ that is greater than 1.

ACTION: Ensure that SMF records are not missing.

REFERENCES: None

+------------+
| DB200033 |
+------------+

TEXT: >>>>> MISSING DB2DSD DATA AFTER DB2 SYSTEM

RESTART. THE CURRENT RECORD DB2ID = %DB2ID END
TIME STAMP = %XENDTS WILL BE WRITTEN AS AN
ACCUMULATED OBSERVATION

TYPE: Information

REASON: SMF data is missing after a DB2 subsystem

restart.

ACTION: Ensure that SMF records are not missing.

REFERENCES: None

+------------+
| DB200034 |
+------------+

TEXT: >>>>> THERE IS MORE THAN A ONE DAY DIFFERENCE

BETWEEN THE PRIOR DB2DSD RECORD PROCESSED DB2ID =
%LAGDB2ID END TIME STAMP = %XLAGENDT AND THE
CURRENT RECORD BEING PROCESSED DB2ID = %DB2ID END
TIME STAMP = %XENDTS. THIS OBSERVATION WILL BE
WRITTEN WITH MISSING VALUES >>>>>

TYPE: Information

REASON: There is more than a one-day difference between

the end timestamps of the current and prior
records.

ACTION: Ensure that SMF records are not missing.

Appendix A: MESSAGES 533

10.2 Standard User Exits

REFERENCES: None

+------------+
| DB200035 |
+------------+

TEXT: >>>>> THE NEW START RECORD FOR DB2DDY IS FOR

MVSID: %SYSID
DB2ID: %DB2ID
LOCATION: %DB2RLOCN
END TIME STAMP: %XENDTS
SEQUENCE #: %DB2ISEQ
THIS OBSERVATION WILL BE THE NEW BASE FOR
CALCULATING ALL STATISTICS FOR THIS LOCATION

TYPE: Information

REASON: Identifies the start record for this location.

ACTION: None

REFERENCES: None

+------------+
| DB200036 |
+------------+

TEXT: >>>>> SEQUENCE ERROR FOR PRIOR DB2DDY RECORD

LAST DB2ID: %LAGDB2ID
LAST LOCATION: %LAGRLOCN
END TIME STAMP: %XLAGENDT
LAST SEQUENCE#: %LAGISEQ INDICATING %SEQDIF
STATISTICS RECORD(S) MAY BE MISSING.
NEW SEQUENCE#: %DB2ISEQ

TYPE: Information

REASON: Some Type 100 SMF records are missing.

ACTION: Determine the cause for the missing records.

REFERENCES: None

+------------+
| DB200037 |
+------------+

534 Analyzer Option for DB2 Guide

10.2 Standard User Exits

TEXT: >>>>> INPUT PROCESSING ERROR

DB2 VERSION %XREL IS NOT SUPPORTED. INPUT RECORD
WITH DB2ID = %DB2ID AND END TIME STAMP = %XENDTS
HAS BEEN REJECTED.

TYPE: Error

REASON: SMF records from an unsupported release of DB2

have been encountered.

ACTION: Ensure that SMF data being input is from a

supported DB2 release.

REFERENCES: None

+------------+
| DB200038 |
+------------+

TEXT: %INSMFOL SKIPPED SMF RECORDS FROM UNSUPPORTED DB2

RELEASES.

TYPE: Warning

REASON: SMF records from an unsupported release of DB2

have been encountered and skipped.

ACTION: Ensure that SMF data being input is from a

supported DB2 release.

REFERENCES: None

+------------+
| DB200039 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

SYSTEM RECORD - DDF SYSTEM STATISTICS SECTION
%QWS00RCN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of DDF System Statistics data

sections

Appendix A: MESSAGES 535

10.2 Standard User Exits

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200040 |
+------------+

TEXT: NOTE: EITHER THE DSD OR THE DSY FILE IS TURNED

OFF IN THE DAYS TIMESPAN. YOU CANNOT PRODUCE THE
CALENDAR REPORT UNLESS BOTH FILES ARE ACTIVE IN
THE DAYS TIMESPAN.

TYPE: Warning

REASON: The Calendar Report has been requested but the

DB2DSD and DB2DSY files are not active in the
DAYS timespan.

ACTION: Ensure that the DB2DSY and DB2DSD files are

active in the DAYS timespan.

REFERENCES: None

+------------+
| DB200041 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - BUFFER MANAGER DATA SHARING
SECTION %QWS10R7N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of group buffer pool sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200042 |

536 Analyzer Option for DB2 Guide

10.2 Standard User Exits

+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

DATA BASE RECORD - SERVICE CONTROLLER DATA
SHARING SECTION %QWS10R8N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of global locking sections.

ACTION: Ensure that the SMF Type 100 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200043 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - BUFFER MANAGER DATA SHARING
SECTION %QWA01R9N
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of buffer manager data sharing

sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200044 |
+------------+

TEXT: !!!!! UNANTICIPATED SECTION COUNT !!!!!

ACCOUNTING RECORD - GLOBAL LOCKING DATA SHARING
SECTION %QWA01RAN
!!!!! UNANTICIPATED SECTION COUNT

TYPE: Error

REASON: Incorrect number of global locking data sharing

Appendix A: MESSAGES 537

10.2 Standard User Exits

sections.

ACTION: Ensure that the SMF Type 101 records being input
contain only DB2 data.

REFERENCES: None

+------------+
| DB200049 |
+------------+

TEXT: %WEIRDREC INVALID (NO-HEADER) RECORDS DROPPED

TYPE: Warning

REASON: Some SMF records do not have enough sections to

be processed by CA MICS.

ACTION: No action is needed. CA MICS discards records

that have insufficient data.

REFERENCES: None

+------------+
| DB200050 |
+------------+

TEXT: UNICODE TO EBCDIC TRANSLATION FAILED:

INSUFFICIENT SAS LEVEL
SYSID = %U_SYSID; DB2ID = %U_DB2ID; VARIABLE =
%U_VAR(%U_CNT TIMES).

TYPE: Warning

REASON: During the processing of DB2 Version 8 Release 1

or higher data, the CA MICS DB2 Analyzer could
not perform Unicode to EBCDIC character
translation because it is not executing at the
minimum SAS 8.02 maintenance level. This message
displays the number of times this condition
occurred for each SYSID, DB2ID, and affected data
element combination.

ACTION: The data element %U_VAR will contain unprintable

characters. Ensure that the CA MICS DB2 Analyzer
executes at SAS 8.02 or higher maintenance level.

538 Analyzer Option for DB2 Guide

10.2 Standard User Exits

REFERENCES: None

+------------+
| DB200100 |
+------------+

TEXT: STARTING DELTA PROCESSING FOR: %FILENAME

TYPE: Information

REASON: The delta calculations for the %FILENAME data

elements have been initiated.

ACTION: None

REFERENCES: None

+------------+
| DB200102 |
+------------+

TEXT: SUSPEND RECORD DELETED DUE TO AGE: SYSID=%SYSID;

DB2ID=%DB2ID; ENDTS=%ENDTS; DB2SUSCT=%DB2SUSCT

TYPE: Information

REASON: Suspend records are deleted from the suspend file

for DB2IDs not encountered for 10 days. Suspend
records hold the values last encountered for a
DB2ID in the DAILY update and are used to
initialize the lag variables for delta
calculations during the next DAILY run. DB2IDs
not encountered for 10 days are considered
decommissioned.

ACTION: None

REFERENCES: None

+------------+
| DB200104 |
+------------+

TEXT: ISEQUENCE RESET: SYSID=%SYSID; DB2ID=%DB2ID;

DB2ISEQ=%DB2ISEQ; ENDTS=%ENDTS

TYPE: Information

Appendix A: MESSAGES 539

10.2 Standard User Exits

REASON: The instrumentation sequence value was 1. The

DB2ID was most likely terminated and restarted.
Lag values are reset for delta calculations.

ACTION: None

REFERENCES: None

+------------+
| DB200106 |
+------------+

TEXT: NO SUSPEND RECORD FOR: SYSID=%SYSID;

DB2ID=%DB2ID; ENDTS=%ENDTS DB2ISEQ=%DB2ISEQ

TYPE: Information

REASON: No suspend record was found to initialize lag

variables for delta calculations. The DB2ID is
probably new. Delta processing will be skipped
for the first record.

ACTION: None

REFERENCES: None

+------------+
| DB200108 |
+------------+

TEXT: OUT OF SEQUENCE: SYSID=%SYSID; DB2ID=%DB2ID;

ENDTS=%ENDTS; DB2ISEQ=%DB2ISEQ; LAGISEQ=%LAGISEQ;
FILE00=%FILE00; SUSPEND=%SUSPEND

TYPE: Warning

REASON: An instrumentation sequence value was less than

the previous value. Normally, the
instrumentation sequence values increment by 1
from record to record. No delta processing can
take place. Lags values are reloaded.

ACTION: If this is a frequent problem, contact the DB2

administrator.

REFERENCES: None

540 Analyzer Option for DB2 Guide

10.2 Standard User Exits

+------------+
| DB200109 |
+------------+

TEXT: DUPLICATE ISEQ: SYSID=%SYSID; DB2ID=%DB2ID;

ENDTS=%ENDTS; DB2ISEQ=%DB2ISEQ; LAGISEQ=%LAGISEQ;
FILE00=%FILE00; SUSPEND=%SUSPEND

TYPE: Warning

REASON: The same instrumentation sequence value was found

on consecutive records. However, the end
timestamp was higher than the previous record.
Delta processing continues. Some possible causes
of this are:
o Some other DB2 monitor is recording DB2
performance data to SMF.
o A performance trace was started that
recorded additional records to SMF.

ACTION: Alert the DB2 administrator of this condition.

REFERENCES: None

+------------+
| DB200110 |
+------------+

TEXT: MORE THAN ONE DAY EXISTS BETWEEN CURRENT

AND PREVIOUS OBSERVATIONS:
SYSID=%SYSID; DB2ID=%DB2ID; ENDTS=%XENDTS
LAGENDTS=%XLAGTS; FILE00=%FILE00
SUSPEND=%SUSPEND DB2RLOCN=%DB2RLOCN

TYPE: Warning

REASON: The difference between ENDTS on the current

record and the previous record is greater than 24
hours.

ACTION: Determine if this gap in data is correct or if

data was missing from SMF. Data will not exist
unless the DB2 Address Space was active (up and
running) and recording to SMF. If data was
missing, but is available, you may want to
restore the unit database and rerun the daily

Appendix A: MESSAGES 541

10.2 Standard User Exits

process with all the input data.

REFERENCES: None

+------------+
| DB200111 |
+------------+

TEXT: ONE OR MORE VARIABLES CONTAINED A MISSING VALUE.

FILE=%FILE
THIS MAY BE NORMAL IF VARIABLE IS INACTIVE IN
DB2GENIN OR UNAVAILABLE AT THIS DB2 RELEASE.
REFER TO THE SASLOG FOR THE SPECIFIC VARIABLES.

TYPE: Warning

REASON: Either the temporary variable used to hold the

previous observation's value or the current
observation contains a missing value.

ACTION: This condition may be normal if either the

variable is not available at the release of DB2
that you are processing or the data element has
been deactivated in DB2GENIN. Determine which it
is, and, if this field is available and you
require it, activate it.

REFERENCES: None

+------------+
| DB200112 |
+------------+

TEXT: DURING DELTA PROCESSING, AT LEAST ONE VARIABLE

WOULD HAVE RESULTED IN A NEGATIVE VALUE.
VARIABLE IS SET TO 0. FILE=%FILE
REFER TO THE SASLOG FOR THE SPECIFIC VARIABLES.

TYPE: Warning

REASON: The reason depends on the file noted in the

message text, but is the result of the preceding
observation containing a value greater than that
in the current observation, which is unexpected
in cumulative records.

ACTION: If the file is the DSB, DSY or DDY files, then

542 Analyzer Option for DB2 Guide

10.2 Standard User Exits

the problem may be in the raw data itself. The

fields are either corrupted, or the field is not
accumulated across intervals as expected. If the
file is the DSD file, then this may be the result
of our attempt to move the buffer pool related
variables to the DSD file. One cause of this may
be that there are more observations in the DSB
file for some buffer pools than others. When
this occurs, remaining observations will contain
a 0 value, and result in this error message.
This may be normal if the buffer pools displayed
in the error message text have been dynamically
deactivated. Refer to the SASLOG for the
specific variables to determine the cause.

REFERENCES: None

+------------+
| DB200199 |
+------------+

TEXT: ENDING DELTA PROCESS FOR: %FILENAME

LAG RELOADS : %RELOADS
INSTRUMENTATION RESETS : %ISEQS
SUSPEND RECORDS AGED : %SUSDELS
MISSING SUSPEND RECORDS : %MISSSUSP
DUPLICATE ISEQS : %DUPISEQ

TYPE: Informational

REASON: Informational processing summary statistics.

ACTION: None

REFERENCES: None

Appendix A: MESSAGES 543

Appendix B: DATA DICTIONARY
The Data Dictionary is only available at your site, where
it has been customized to your configuration and your
product change level.

To see the Data Dictionary at your site, follow the

instructions under Document Browse in the Document Access
Guide.

Appendix B: DATA DICTIONARY 545

Pat Metheny - 557 (Arranged by Bob Curnow)
100% (1)
Pat Metheny - 557 (Arranged by Bob Curnow)
32 pages
Ca Datacom PDF
No ratings yet
Ca Datacom PDF
230 pages
Navision Standard System Admin Manual
0% (1)
Navision Standard System Admin Manual
188 pages
Config - Rationale FSCM IHC
83% (6)
Config - Rationale FSCM IHC
202 pages
Im Connectors Enu
No ratings yet
Im Connectors Enu
708 pages
Spectrum Report Manager
No ratings yet
Spectrum Report Manager
154 pages
Telon Implementation ENU
No ratings yet
Telon Implementation ENU
256 pages
CA Performance Center PDF
No ratings yet
CA Performance Center PDF
71 pages
CA SDM Release ENU
No ratings yet
CA SDM Release ENU
144 pages
Sysview Message ENU
No ratings yet
Sysview Message ENU
524 pages
CA Deliver - Ref - ENU
No ratings yet
CA Deliver - Ref - ENU
365 pages
Ca2e Install Enu
No ratings yet
Ca2e Install Enu
72 pages
Unicenter AutoSy JM Connector ENU
No ratings yet
Unicenter AutoSy JM Connector ENU
61 pages
CA Asset Portfolio Management Implementation Guide
No ratings yet
CA Asset Portfolio Management Implementation Guide
162 pages
ODBC Reporting Guide
No ratings yet
ODBC Reporting Guide
60 pages
ServiceDesk Release ENU
No ratings yet
ServiceDesk Release ENU
86 pages
Siteminder Ps Admin Enu
No ratings yet
Siteminder Ps Admin Enu
353 pages
Rel Notes
No ratings yet
Rel Notes
45 pages
CA Workload Automation AE: Release Notes
No ratings yet
CA Workload Automation AE: Release Notes
43 pages
Erwin API Ref
No ratings yet
Erwin API Ref
207 pages
Erwin API Ref
No ratings yet
Erwin API Ref
195 pages
NFA User Guide en US
No ratings yet
NFA User Guide en US
215 pages
Veritas Appliance AutoSupport Reference Guide
No ratings yet
Veritas Appliance AutoSupport Reference Guide
42 pages
Spectrum Southbound Gateway ENU
No ratings yet
Spectrum Southbound Gateway ENU
70 pages
SysviewPM Rel Notes Enu
No ratings yet
SysviewPM Rel Notes Enu
90 pages
Spectrum Host System Resources User ENU
No ratings yet
Spectrum Host System Resources User ENU
91 pages
SysviewPM Admin Enu
No ratings yet
SysviewPM Admin Enu
529 pages
Siteminder Java Dev Enu
No ratings yet
Siteminder Java Dev Enu
167 pages
SysviewPM EXPLORE ReportWriter Enu
No ratings yet
SysviewPM EXPLORE ReportWriter Enu
297 pages
Basics User Guide
No ratings yet
Basics User Guide
150 pages
CA Panvalet® ISPF Option: User Guide
No ratings yet
CA Panvalet® ISPF Option: User Guide
271 pages
CA Workflow API Ref Guide ENU
No ratings yet
CA Workflow API Ref Guide ENU
138 pages
Generating and Implementing Applications: Release 8.7
No ratings yet
Generating and Implementing Applications: Release 8.7
265 pages
NetBackup812 AdminGuideII Server
No ratings yet
NetBackup812 AdminGuideII Server
207 pages
NetBackup83 AdminGuideII Server
No ratings yet
NetBackup83 AdminGuideII Server
221 pages
Plex Tutorial Windows ENU
No ratings yet
Plex Tutorial Windows ENU
148 pages
CA-View Reference
No ratings yet
CA-View Reference
358 pages
CA SDM CMDB Tech Ref Enu
No ratings yet
CA SDM CMDB Tech Ref Enu
254 pages
MDM 104 PerformanceTuningGuide en
No ratings yet
MDM 104 PerformanceTuningGuide en
53 pages
SysviewPM Install Enu
No ratings yet
SysviewPM Install Enu
188 pages
User Guide (1)
No ratings yet
User Guide (1)
586 pages
Im Admin Enu
No ratings yet
Im Admin Enu
559 pages
Ca Siteminder® Secure Proxy Server: Release Notes
No ratings yet
Ca Siteminder® Secure Proxy Server: Release Notes
32 pages
NetBackup IT Analytics Administrator Guide v11.5
No ratings yet
NetBackup IT Analytics Administrator Guide v11.5
344 pages
NetBackup IT Analytics Report Reference Guide v11.4
No ratings yet
NetBackup IT Analytics Report Reference Guide v11.4
992 pages
NetBackup10 AdminGuideII Server
No ratings yet
NetBackup10 AdminGuideII Server
227 pages
SDI April2023 OrganizationAdministration en
No ratings yet
SDI April2023 OrganizationAdministration en
23 pages
BCMS
No ratings yet
BCMS
160 pages
Manual de ERwin 7.3
No ratings yet
Manual de ERwin 7.3
67 pages
NetBackup105_AdminGuideII_Server
No ratings yet
NetBackup105_AdminGuideII_Server
230 pages
CA2E StandardsGuide ENU
No ratings yet
CA2E StandardsGuide ENU
362 pages
Siteminder Wa Install Enu
No ratings yet
Siteminder Wa Install Enu
264 pages
Ca Siteminder Erp Agents: Agent Guide For Siebel
No ratings yet
Ca Siteminder Erp Agents: Agent Guide For Siebel
72 pages
Admin
No ratings yet
Admin
634 pages
NetBackup80 OpsCenter Reporting PDF
No ratings yet
NetBackup80 OpsCenter Reporting PDF
356 pages
NetBackup102 AdminGuideII Server
No ratings yet
NetBackup102 AdminGuideII Server
232 pages
Change Impact and Upgrade Guide ENU
No ratings yet
Change Impact and Upgrade Guide ENU
56 pages
Wa Ca7 Primer Enu
No ratings yet
Wa Ca7 Primer Enu
178 pages
SysviewPM GMI User Enu
No ratings yet
SysviewPM GMI User Enu
129 pages
The IT Factory
From Everand
The IT Factory
H.J.C. van Aken
No ratings yet
IBM Cognos 8 Business Intelligence: The Official Guide
From Everand
IBM Cognos 8 Business Intelligence: The Official Guide
Dan Volitich
No ratings yet
Austin and Boxerman's Information Systems for Healthcare Management, Seventh Edition
From Everand
Austin and Boxerman's Information Systems for Healthcare Management, Seventh Edition
Gerald L. Glandon
No ratings yet
5eb2725c33da8ad329551c85 - Games Design Document
No ratings yet
5eb2725c33da8ad329551c85 - Games Design Document
27 pages
The 1 E & A Counting System
100% (1)
The 1 E & A Counting System
2 pages
A Performer's Analysis of Selected Jazz Works For Saxophone Quartet
No ratings yet
A Performer's Analysis of Selected Jazz Works For Saxophone Quartet
49 pages
TOTO Tribute Library For Roland JD-XA
No ratings yet
TOTO Tribute Library For Roland JD-XA
6 pages
PASIC 2014 Program Reduced
No ratings yet
PASIC 2014 Program Reduced
92 pages
CC 9 Attach 2
No ratings yet
CC 9 Attach 2
231 pages
Karaoke 5 Instruction Manual Contents
No ratings yet
Karaoke 5 Instruction Manual Contents
29 pages
B-Bng-Cg53xasr9k Chapter 01110
No ratings yet
B-Bng-Cg53xasr9k Chapter 01110
16 pages
82.3.2 BKG Edit - Pages (PDFDrive)
No ratings yet
82.3.2 BKG Edit - Pages (PDFDrive)
43 pages
Why Is Art Important To Early Development?: A Community Presentation
No ratings yet
Why Is Art Important To Early Development?: A Community Presentation
12 pages
Guitar School: Tales of "Warmdaddy"
100% (1)
Guitar School: Tales of "Warmdaddy"
84 pages
General Product Catalog: Shelco Filters
No ratings yet
General Product Catalog: Shelco Filters
48 pages
On The Cohen-Macaulayness of The Fiber Cone of An Ideal
No ratings yet
On The Cohen-Macaulayness of The Fiber Cone of An Ideal
17 pages
View Me Lord
No ratings yet
View Me Lord
4 pages
1994 08 01 PDF
No ratings yet
1994 08 01 PDF
27 pages
1925-02-06 PDF
No ratings yet
1925-02-06 PDF
8 pages
Abhinav Srivastava Resume
No ratings yet
Abhinav Srivastava Resume
5 pages
(Wiley) Software Factories - Assembling Applications With Patterns, Models
100% (1)
(Wiley) Software Factories - Assembling Applications With Patterns, Models
503 pages
The Impact of Information Technology On The Audit Process
No ratings yet
The Impact of Information Technology On The Audit Process
35 pages
Operating System Module
No ratings yet
Operating System Module
372 pages
Operating System CSC
No ratings yet
Operating System CSC
46 pages
SJ-20101227165724-011-NetNumen M31 (RAN) (V12.10.032) MML Terminal Operation Guide PDF
No ratings yet
SJ-20101227165724-011-NetNumen M31 (RAN) (V12.10.032) MML Terminal Operation Guide PDF
41 pages
UNIT-1 Introduction To Software Architecture
No ratings yet
UNIT-1 Introduction To Software Architecture
34 pages
Batch Control
No ratings yet
Batch Control
18 pages
Batch Processing Vs Stream Processing
No ratings yet
Batch Processing Vs Stream Processing
13 pages
Sysbii File Sharing
No ratings yet
Sysbii File Sharing
10 pages
Manual Sap EPM
No ratings yet
Manual Sap EPM
76 pages
C 1
No ratings yet
C 1
6 pages
Sap MM Faqs
No ratings yet
Sap MM Faqs
16 pages
TERADATA DBA or TERADATA DEVELOPER
No ratings yet
TERADATA DBA or TERADATA DEVELOPER
11 pages
Aue2602 Homework 3 Memo
No ratings yet
Aue2602 Homework 3 Memo
13 pages
Ch02-OS9e
No ratings yet
Ch02-OS9e
52 pages
Oracle Retail: 24x7 Inventory Availability Release 14.0 December 2013
No ratings yet
Oracle Retail: 24x7 Inventory Availability Release 14.0 December 2013
16 pages
Vemag e
No ratings yet
Vemag e
2 pages
Cambridge HSC BUSINESS STUDIES CH3
No ratings yet
Cambridge HSC BUSINESS STUDIES CH3
22 pages
Application Review Audit Program
No ratings yet
Application Review Audit Program
7 pages
ECC BW APO Daily Health Checks 24th Feb 2015
No ratings yet
ECC BW APO Daily Health Checks 24th Feb 2015
232 pages
AUDCIS CHAP 7 & 8
No ratings yet
AUDCIS CHAP 7 & 8
48 pages
Metodologia Yourdon
No ratings yet
Metodologia Yourdon
643 pages
Batch Flow Analysis
100% (2)
Batch Flow Analysis
4 pages
DataKinetics-Batch-Optimization-Whitepaper
No ratings yet
DataKinetics-Batch-Optimization-Whitepaper
7 pages
Online SmartTest Setup v1.0
No ratings yet
Online SmartTest Setup v1.0
30 pages
Chapter 08 Lecture 12 To 19 w08 431 Scheduling
No ratings yet
Chapter 08 Lecture 12 To 19 w08 431 Scheduling
252 pages
Operating System Unit 1
0% (1)
Operating System Unit 1
25 pages
Saddam Hussien Mainframe Resume......
No ratings yet
Saddam Hussien Mainframe Resume......
5 pages