Scribd
Upload
626 views1 page

Axial Ae 1 Esc Manual

The document provides instructions for setting up and using an AE-1 Forward/Reverse ESC for an electric motor. It includes connecting the ESC wires to the motor and receiver, setting the throttle trim to zero before powering on the ESC, and checking that the motor spins in the desired direction. Reversing the motor direction requires switching the motor wires, not the battery wires. Safety precautions are given such as only connecting the battery immediately before use and disconnecting it afterwards.

Uploaded by

Enache Daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
626 views1 page

Axial Ae 1 Esc Manual

The document provides instructions for setting up and using an AE-1 Forward/Reverse ESC for an electric motor. It includes connecting the ESC wires to the motor and receiver, setting the throttle trim to zero before powering on the ESC, and checking that the motor spins in the desired direction. Reversing the motor direction requires switching the motor wires, not the battery wires. Safety precautions are given such as only connecting the battery immediately before use and disconnecting it afterwards.

Uploaded by

Enache Daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AX24250 AE-1 Forward/Reverse ESC Instructions

- Blue
Motor
- Red + Orange
Battery
+ Black

Setup:
• Mount the ESC in an area that is well ventilated and isolated from vibration and shock.
• Connect the ESC wires to the motor.
• Plug the receiver wire into the throttle channel on the receiver.
• Before plugging the battery into the ESC, make sure your transmitter is on and the throttle trim is set at zero
• Switch on the power of the ESC, make sure your radio is on Specifications:
• The ESC will emit 3 beeps confirming the ESC is ready to work Input Voltage 5~10 Cell-2VDC/Cell
• Apply throttle to make sure the motor is going the direction you wanted. To reverse the direction of the motor Size 34.8 x 33.5 x 30mm
switch the wires going to the motor. Do not reverse the battery wire connections! Reversing the battery Weight 53g
polarity will permanently damage the ESC. Motor 15T or greater
On-Resistance-Forward FET 0.0025Ω
On-Resistance-Reverse FET 0.005Ω
CAUTION Rated/Peak Current-Forward 60A / 150A
Connect the battery pack just before driving and disconnect it immediately after. Rated/Peak Current-Reverse 35A / 75A
Braking Current 150 A
Always make sure you are connecting the ESC to a proper power source that has the correct voltage & polarity. BEC Voltage/A DC 5V / 1A
Incorrect voltages or reversed polarity will damage the ESC. PWM Frequency 1 K Hertz

Once the battery pack is connected, handle the model with extreme care, make sure you are clear of all rotating parts.

AX24250-I001

You might also like