Scribd
Upload
327 views3 pages

Some Shortcut Word in Telecom

The document lists various key performance indicators and parameters used for testing 4G, 3G, and 2G mobile networks including: 1. RSRP, RSRQ, RSSI, SINR, CQI, PCI, BLER, DL Throughput, UL Throughput for 4G 2. RSCP, EcNo, VOL, VOS, HSDPA, HSUPA for 3G 3. GPRS, EDGE for 2G It also provides descriptions of terms like CSFB, PS Download, IDLE, and lists the steps in a typical DTAC network test report process.

Uploaded by

Chhengmean Sim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
327 views3 pages

Some Shortcut Word in Telecom

The document lists various key performance indicators and parameters used for testing 4G, 3G, and 2G mobile networks including: 1. RSRP, RSRQ, RSSI, SINR, CQI, PCI, BLER, DL Throughput, UL Throughput for 4G 2. RSCP, EcNo, VOL, VOS, HSDPA, HSUPA for 3G 3. GPRS, EDGE for 2G It also provides descriptions of terms like CSFB, PS Download, IDLE, and lists the steps in a typical DTAC network test report process.

Uploaded by

Chhengmean Sim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

-RSRP: Reference Signal Received Power

-RSRQ: Reference Signal Received Quality


-RSSI: Received Signal Strength Indicator
-SINR: Signal to Interference Noise Ratio
-CQI: Channel Quality Index
-PCI: Physical Cell Identity
-BLER: Block Error Ratio
-DL Throughput: Downlink Throughput
-UL Throughput: Uplink Throughput
Telecom Link:
https://telecom-knowledge.blogspot.com/2016/09/lte-drive-test-parameters.html

------Other-------
-CGI: Cell Global Identity
-MCC: Mobile Country Code (0-999)
-MNC: Mobile Network Code (0-99)
-LAC: Location Area Code (0-65535)
-CI: Cell Identity (0-65535)
-BSIC: Base Station Identity Code
-KPI: Key Performance Indicators
------Report-----
-SSV: Single Site Verification
----------4G----------
1. RSRP: Reference signal Received Power
2. RSRQ: Reference Signal Received Quality
3. RSSI: Received Signal strength Indicator
4. SINR: Signal to Interference Noise Ratio
5. CQI: Channel Quality Index
6. PCI: Physical Cell Identity
7. BLER: Block Error Ratio
8. DL Throughput: Down Link Throughput
9. UL Throughput: Up Link Throughput
-UE: User Equipment
-TD-SCDMA: Time Division-Synchronous Code Division Multiple Access
-OFDMA: Orthogonal Frequency Division Multiple Access
-SC-FDMA: Single Carrier Frequency Division Multiple Access
-E-UTRA: Evolved Universal Terrestrial Access
-PUSCH: Physical Uplink Shared Channel
-PUCCH: Physical Uplink Control Channel
-PRACH: Physical Random Access Channel
-------3G-----------------
- (3G) UMTS: Universal Mobile Telecommunication System
- SC:Scrambling Code
- RSCP:Received Signal Code Power
- EcNo:
- VOL:
- VOS:
- HSDPA: High Speed Downlink Packet Access
- HSUPA: High Speed Uplink Packet Access
-------------2G-----------
- (2G) GPRS: General Packet Radio Service
-(2G) EDGE: Enhanced Data GSM Environment

*******************DTAC Report*************
Dtac Project evolution progress:
1,SSV = Single Site Verification => verify site problem
2,PAC = Preliminary Acceptance Certificate => verify a cluster KPI and problem area

3,TR = Tuning Report => modify Initial DT result => improve problem area
4,PAO = Problem Area Optimization => improve problem area the whole cluster
5,CR = Comparison Report => compare after optimize and before optimize
6,FAC = Final Acceptance Certificate => test the whole cluster then show and check
with customer accept or not ?
------------------------
Co-location, Intra_Fre, it means co-site HO from 4G to 4G or 3G to 3G in edividual
site.
Inter site NB, Intra Fre, it means inter-site HO from 4G to 4G the same but HO to
other site.
-------------------------------
co-location Inter_Fre, it mean co-site HO from fre 4G to 3G fre or 3G to 4G in the
edividual site.
Inter site NB, Inter_Fre, it means Inter-site from fre 4G to 3G fre or 3G to 4G in
the other site.
---------------------------
***FAC U850/U2100
Cluster Accecptance U21 UL Phase Upgrade 2016
C#1
MS1_VOL(F1&F2) Lock band
MS2_VOL(F1&F2)Auto
Mode
MS3_HSUPA(F1&F2)Lock Band
C#2
MS1_VOS(MOC) Lock Band
MS2_VOS(MTC)Lock Band
MS3_IDLE(Static)Auto Mode
MS4_HSDPA(F1&F2)Lock Band
***LTE Cluster Acceptance FAC
C#1
MS1 - CSFB MOC (PSTN)1
MS2 - CSFB to MTC_(not used)
MS3 - CSFB MTC
MS4 - PS Download4 (AutoMode)
MS5 - IDLE5
C#2
MS1 - PS Download1
MS2 - PS Upload1
MS3 - VoLTE MOC3
MS4 - VoLTE MTC
===========
NEW FAC UMTS
FOR UL ROUND
R#1
-UE1:VOL
-UE2:IDLE
R#2
-UE1:VOS MOC
-UE2:VOS MTC
-UE3or:HSDPA
UMTS
-UE3:VOL (AUTO)
-UE4:UPLOAD
FOR UL ROUND

LTE
-UE2:PS UPLOAD
-UE1:PS Download
--------------------------
cellref
Sector_ID
Site_Name
Site_ID
--------------------------
GPRS : General Packet Radio Service
CDMA : Code Devision Multiple Access
FDMA : Frequency Division Multiple Access
TDMA : Time Division Multiple Access
FDD : Frequency Division Duplex In GSM the up link and down link of a user
isseparated by 45MHz
TDD : Time Division Duplex the up link and down link of a user will be at the
samefrequency but at different Time
MAC : Medium Access Control
RLC : Radio Link Control
PDCP : Packet Data Control Protocal
RRC : Radio Resource Control
UTRAN : UMTS (Universal Mobile Telecommunication System) Terrestrial Radio Access
Network

You might also like