Scribd
Upload
25 views

Scaffold Inspec Checklist

The document is a scaffolding safety inspection checklist that contains 10 items to check regarding the condition of scaffolding, including whether it has proper access, secure railings and planks, appropriate spacing and overhang, secured support legs, and ties to the building. The inspector is to indicate for each item whether the scaffolding's condition is safe or unsafe and provide any remarks. They then sign and date the form, including their company and the project/job site.

Uploaded by

Jerry Jamili
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
25 views

Scaffold Inspec Checklist

The document is a scaffolding safety inspection checklist that contains 10 items to check regarding the condition of scaffolding, including whether it has proper access, secure railings and planks, appropriate spacing and overhang, secured support legs, and ties to the building. The inspector is to indicate for each item whether the scaffolding's condition is safe or unsafe and provide any remarks. They then sign and date the form, including their company and the project/job site.

Uploaded by

Jerry Jamili
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Scaffolding Safety Inspection

Please check the following conditions and indicate whether the scaffolding was in a safe or
unsafe condition.

No. Details Yes No Remarks


1 Ladder provided for access, secured and 3 ft. above platform?
Planking is 2X10 scaffold grade free of cracks, defects and excessive
2
debris?
3 Top rail, mid rail and end rails secure and provided over 7 ½ ft.?
Full solid planking (3 boards ) provided above 7 ½ ft. with opening
4
under back railing not exceeding 10” maximum?
5 Space between building and platform not exceeding 16”?

6 Single plank permitted only on platforms up to 4 ft. high?

7 Platform slopes do not exceed 2 ft. vertically to 10 ft. horizontally?


Planking overhangs ledger or support 6” minimum and 18”
8
maximum?
All support leg base plates resting on dirt are secured to a
9 2”X10”X10” wooden base or 1 1/8”X10”X10” exterior grade
plywood?
Scaffold ties to building with double looped #12 or single looped #10
10 Iron wire not to exceed 30 ft. horizontally and 26 ft. intervals
vertically?

___________________ _______________

Inspectors Name Date

___________________ _______________

Inspectors Company Project/Job Site

You might also like