Scribd
Upload
179 views1 page

Austain Technical Information Sheet Metric Pitch Table

This document provides a metric thread pitch table with the following information: 1) It lists common metric thread diameters from 3mm to 48mm and their corresponding coarse, standard, and fine thread pitches in millimeters. 2) It includes a diagram illustrating some of the metric thread diameters. 3) It notes that the information is provided as a general guide and should not be used for work requiring high tolerances.

Uploaded by

laleesam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views1 page

Austain Technical Information Sheet Metric Pitch Table

This document provides a metric thread pitch table with the following information: 1) It lists common metric thread diameters from 3mm to 48mm and their corresponding coarse, standard, and fine thread pitches in millimeters. 2) It includes a diagram illustrating some of the metric thread diameters. 3) It notes that the information is provided as a general guide and should not be used for work requiring high tolerances.

Uploaded by

laleesam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL INFORMATION

Metric Thread Pitch Table


Metric Pitch Table Metric Thread Pitches
Pitch mm
Metric Diameter
Coarse Standard Fine Standard
2.0 mm
3mm 0.50 0.35 5.0 mm
4mm 0.70 0.50
5mm 0.80 0.50 1.75 mm
6mm 1.00 0.75 4.5 mm
8mm 1.25 1.00
10mm 1.50 1.25 1.5 mm
12mm 1.75 1.25
14mm 2.00 1.50
4.0 mm
1.25 mm
16mm 2.00 1.50
18mm 2.50 1.50
20mm 2.50 1.50 1.0 mm
3.5 mm
22mm 2.50 1.50
24mm 3.00 2.00
0.8 mm
27mm 3.00 2.00
30mm 3.50 2.00 3.0 mm
33mm 3.50 2.00
0.7 mm
36mm 4.00 3.00
39mm 4.00 3.00 2.5 mm 0.5 mm
42mm 4.50 3.00
48mm 5.00 3.00

18mm
Metric Thread Diameters 16mm
14mm
12mm
10mm
6mm 8mm
3mm 4mm 5mm

33mm 30mm 27mm 24mm 22mm 20mm

48mm

42mm
39mm
36mm

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
cm
Scale Check: After printing measure scale above with a ruler to ensure correct scale.

Note: this information is provided as a guide only and should not be used when working to high tolerences.

You might also like