OLYMPUS KEYMED GROUP LTD.

KeyMed House, Stock Road, Southend-on-Sea, Essex SS2 5QH, United Kingdom Olympus Corporation KeyMed Limited
Telephone: +44 (0)1702 616333 Fax: +44 (0)1702 465677
e-mail: [email protected] www.olympusindustrial.com

OLYMPUS CORPORATION
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan
OLYMPUS INDUSTRIAL AMERICA INC.
One Corporate Drive, Orangeburg, New York 10962, USA
OLYMPUS SINGAPORE PTE LTD.
491B River Valley Road #12-01/04, Valley Point Office Tower, Singapore 248373
OLYMPUS HONG KONG AND CHINA LIMITED.
Room 518, 5F, Ocean Center 5, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong
OLYMPUS MOSCOW LIMITED LIABILITY COMPANY
117071, Moscow, Malaya Kaluzhskaya 19, bld. 1, fl.2, Russia
OLYMPUS AUSTRALIA PTY. LTD.
www.olympusindustrial.com 31 Gilby Road, Mount Waverley, Victoria 3149, Australia

Printed in UK 5048362/1103 09 OLYMPUS INDUSTRIAL VIDEOSCOPE SYSTEM OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 09
 System Charts
Olympus Industrial Endoscopes
meet needs across a wide range of areas, FIBERSCOPES AND RIGID BORESCOPES
from maintenance to R & D
Eyeball Observation System Digital Photography System
Olympus technology has made it possible to obtain views from internal or difficult to reach areas, easily and quickly,
Olympus
without teardown or disassembly, and without destroying exterior features. Digital Camera Adaptor CAMEDIA
AI-DC3/AK-DC3
Olympus has a comprehensive range of industrial endoscopes, such as videoscopes, fiberscopes and borescopes, with a Digital Camera
range of ancillary equipment to match your specific requirements. These scopes, all designed and made by Olympus, offer Industrial Fiberscope Optical
Adaptor
superior imaging and performance achieved through combining Olympus expertise in optics, electronics and precision
mechanics gained through years of experience. With the ease of use and durability of Olympus products, it is clear that Video System
Olympus Industrial endoscopes can make a large contribution to productivity, safety and reliability in your industry. LCD Monitor
Light Source
Rigid Borescope

C-Mount
Adaptor Video Monitor
SOME APPLICATION EXAMPLES Light Guide Cable

TV Camera VCR
Aerospace Industries Small Diameter Borescope
For examination of Airframe and Gas turbines in research,
production and maintenance for military and civil aircraft. Also Video Printer
rockets and rocket engines.
OM Adaptor
Security
For detection of Narcotics and other contraband items, for bomb
Image Recorder PCMCIA PC
and weapons searches, and for locating those trapped following IW-R1 Memory Card
disasters.
Power Generation
For maintenance of heat exchange pipes, condensers, piping and Film Photography Digital Storage and
Measurement System
Floppy Disk
Flash Path PC
turbines at nuclear, fossil fuel and hydroelectric power generation System DSM-2
facilities.
Industrial Machinery
For quality control and maintenance of motors, boilers, heat
exchangers and machine tools.
Refineries/Chemical Plants
For routine and urgent inspection of process piping, pressurised
storage reservoirs, heat exchangers, boilers etc.
Automotive
For quality control examinations of engines, hydraulic components
and injection nozzles, as well as detection of leaks, squeaks and
rattles in assembled vehicles.
Electrical Equipment/Electronics Industries
For monitoring operation of equipment and factory automation
through automatic inspection and positioning, as well as a wealth
of R & D applications.
Gas Pumping & Delivery Systems
For monitoring corrosion inside and outside gas pipes, the
presence of water infiltration and flaws in outlets, and for
maintenance of gas turbines used for pumping.
Steel Industries
For equipment maintenance as well as quality control of pipes and
tubes.
Architecture/Construction
For examination of walls, ducts, structured joints, as well as for
viewing inside architectural models.
Education/Research
For monitoring animals and insects, root systems of plants etc.
Also for historical and archaeological applications such as internal
inspection of statues and tombs.
Railroad/Shipping
For routine inspection of motors, turbines, diesel engines, piping etc.
Water Supply/Drainage
For locating rust and blockages inside pipe systems.
Useful for documentation before and after lining is coated.

02 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 23
System Charts Industrial Videoscopes

Industrial Videoscopes - Providing comprehensive and remote

VIDEOSCOPES
visual inspection ability, with the highest quality colour images,
IPLEX Series accurate internal measurement, and PC interaction
3D Eye-Trek Olympus Videoscopes provide bright, clear, full screen
images, and offer the most versatile of inspection tools.
Industrial Videoscope System
IPLEX SA (STEREO MEASUREMENT) STRUCTURAL DRAWING
IPLEX SA Optical Adaptors Remote Control
IPLEX Extension Cable
lnsertion section LCD monitor

Rigid Sleeve CCD

MAJ-1104 Video Monitor Signal bus
Distal end
MAJ-1105 Bright, High-Quality Images
Field of view

Flexible portion
VCR Light guide fiber Light source
Depth of field Bending section Electronic control unit

Objective lens
and optical tip adaptor
Remote control

USB or
Recording Card
Ultra-compact CCD for image transmission.
PC 4 way Tip Angulation Optical Tip Adaptors
High-resolution images are displayed on a TV monitor.
The videoscope captures light reflected from a subject through an
objective lens and directs it to the surface on the CCD. The CCD then
IPLEX SX converts the light into electrical signals and transfers this data to the
3D Eye-Trek
videoscope control unit. The unit then sends a video output to the monitor.

MAIN APPLICATIONS
Optical Adaptors Remote Control Ideal when higher resolution, longer insertion and
Extension Cable brighter images than those obtainable with fiberscopes Forward/Side-Viewing Adaptor Ultra-Wide-Angle Adaptor

are required. TV monitor observation only.

Rigid Sleeve
MAJ-1104 For inspecting:
Video Monitor
MAJ-1105 ● Inside engines of vehicles, aircraft etc.
● Inside piping, such as heat exchangers, steel pipes and drainage
pipes.
Steel coil Mesh interior Resin tube Braided exterior
● Inside long pipes, such as plant piping and condensers.
VCR
● For wide cavities, such as interiors of tanks, structures and large “Tough Tapered Flex” Tube:
Featuring a more flexible distal end and stiffer proximal end, this
diameter pipes. Olympus-developed tube design provides the superior insertion
● Inside precision machinery, such as fax machines and copiers. capability you need to perform inspections more easily.

USB or MAIN FEATURES

Recording Card PC
Bright, high-resolution images
The bright, high-resolution images captured by the high-performance
CCD are larger, clearer and easier to view with full-screen colour
display.
Working Channel Tools
Interchangeable optical adaptors
You can easily change optical adaptors to suit the observation
requirements such as direction of view, angle of view and depth of field.
System Case for Series 6 Videoscope Simultaneous direct and side-viewing and super-wide-angle adaptors
are also available. Image Recording & Report Generation

Industrial Videoscope TTF tube with superb insertability and durability

IV6C6 TV Camera
The superior insertability of the Olympus-designed TF (Tapered Flex)
IV8C6 OTC-6
tube allows you to easily negotiate bends. Incorporated in the IPLEX
IV7D6
Optical inserting tube, the new TTF (Tough Tapered Flex) tube design features
IV5C6 CCU
Adaptor a braided tungsten exterior and is three times more durable than
IV-6A Video Monitor conventional tubes.
IV-6
IV System Case-2 Observation functions including zoom and brightness adjustment
In addition to zoom observation and various image adjustment functions
Light Source VCR such as brightness and sharpness adjustment, the IPLEX system offers
Rigid Sleeve
ILH-2
MAJ-456* a convenient comparison function that displays live and recorded Stereo Measurement
images simultaneously.
IV6C5 Optical Power Supply Unit Digital image recording with voice annotation
Video Printer
Adaptor MAJ-522
PSU-PLUS Digital still and movie image recording provides flexible and powerful
image management. Voice annotation recording is also possible.
Conversion
Adaptor LCD Monitor Stereo measurement capability
MAJ-565** Up to six different stereo measurement modes are available to facilitate
* For use with IV7D6 only
** Required for use IV6C5 with IV-6A
high-precision measurement, including distance, height and depth.
Digital Storage and 4 way tip angulation “3D Eye-Trek” Face-Mounted Display
Measurement System PCMCIA
Memory Card The tip of the videoscope can be moved in four directions, controlled by Lightweight, comfortable and portable the 3D Eye-Trek
DSM-2 PC displays observation images literally right in front of
the user, allowing the negotiation of difficult access routes and scanning your eyes. When combined with the IPLEX Series, it
during the inspection. delivers ultra-real three-dimensional images.

22 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 03
Industrial Videoscopes Accessories
3D EYE-TREK (for IPLEX) CCTV EQUIPMENT
FMD-3DN (NTSC) Various CCD cameras, CRT and LCD monitors and video recording
equipment products are available for TV observation.
FMD-3DP (PAL) For details of the latest models, contact your local Olympus sales
Allows you to confirm the conditions of an inspection site with super- representative.
real three-dimensional images. 3D Eye-Trek makes it easier to get an
accurate sense of distance, also facilitating insertion of the scope and
IPLEX SERIES access to the site.

INDUSTRIAL VIDEOSCOPE SYSTEM

IPLEX SA (STEREO MEASUREMENT)
IPLEX SA
IPLEX
A videoscope system that integrates everything you need for industrial
endoscopic inspections.
● All-in-one design for easy transport and set up
● Compact, lightweight remote control for single-hand operation
● Four-way joystick-controlled angulation via remote control
● Stepless electronic zoom and versatile brightness adjustment
functions REMOTE CONTROL EXTENSION CABLE (for IPLEX)
● Still image recording, still image and voice annotation recording, and
LIGHT GUIDE CABLE
moving image recording
MAJ-1091 Length: 4m This accessory transmits light from a separate light source to a rigid
● Six stereo measurement modes Extends the remote control cable, allowing more freedom of movement borescope, but is not required for a flexible videscope or fiberscope.
● Scope operation, image recording and management, and during operation. Attaching this cable and removing the monitor from Different types and lengths are available for specific applications.
measurement can all be done using a PC. You can also create and the monopod allows you to operate the main IPLEX unit while moving
edit reports, e-mail images and more freely around a wider area.
● Ultra-real three-dimensional observation with 3D Eye-Trek Note: The remote control shown in the photograph is supplied as a standard part of the
IPLEX system, and is also available as a spare part.
BASIC PERFORMANCE
EASY OPERATION
All-in-One Design
All the components and functions you need for Single-Hand Operation
industrial inspection are built into IPLEX’s IPLEX’s compact, lightweight remote control allows you to operate all
sophisticated all-in-one design. A retractable inspection related functions with one hand, including insertion tube
handle and integral wheels make transportation manipulation, observation, image recording, image management and
simple, while the streamlined design is measurement.
optimised for easy manoeuvring through tight
spaces. High-precision motorised angulation
Angulation of the insertion tube tip can be
controlled with the joystick on the remote
control. In addition to normal movement, a
fine movement mode is provided that allows
exact positioning of the insertion tube tip.

RIGID SLEEVE (for IPLEX)

MULTI-PURPOSE SLEEVE
Useful to provide a constant insertion depth of rigid borescopes.
Set-up is easy
MAJ-1281 (for ø4mm dia. insertion tube)
All you have to do is: MAJ-1253 (for ø6mm and ø6.2mm dia. insertion tube)
1. Open the lid
2. Adjust the monitor position
Useful as an auxiliary insertion tool and also makes the scope easier to
3. Connect a power supply handle. Simply fit and lock the sleeve over the scope insertion tube.
4. Take out the remote control and turn it on
5. Pull out the insertion tube from the
integral drum
When the inspection is complete, just wind
Stepless electronic zoom
up the insertion tube with the winding The stepless zoom enables smooth,
handle. It’s quick and easy. continuous magnification adjustment from
1X to 3X at the touch of a button on the
Rugged design remote control.
From its material and construction, to its
sophisticated shock-absorbing mechanism, Optical brightness adjustment
everything about the IPLEX case has been Various brightness adjustment functions
designed to provide maximum protection such as gain control, automatic brightness
against external impact. The components control and extended exposure are available
themselves are also more toughly built. The to suit different inspection environments. All
TTF (Tough Tapered Flex) tube, for of these functions can be operated from the FIBERSCOPE AND VIDEOSCOPE HOLDER
instance, features an extremely durable remote control. This accessory enables mounting of a fiberscope’s and Series 6
interior construction that’s about three times
more crush resistant than conventional
RETRIEVAL TOOLS videoscope’s control section onto commercially available tripods or
tubes, without comprimising flexibility. Image recording (IPLEX SA) Various types of retrieval tools are available which can be used either other similar devices.
During observation, you can use the internally, with 6.2mm or 7.3mm diameter videoscopes and For IV6C6, IV8C6, IV7D6, IV6C5-110/160, IV6C5XI, IF8C5: MB-937
Detachable monitor remote control to access the menu screen fiberscopes, or externally, using a fixing kit, with instruments of 6mm
and record instantly. Still images, with For Fiberscopes other than the above: MB-936
The high-resolution LCD monitor can be
voice annotation and moving images can
diameter and above. A separate holder is available for Series 5 borescopes (KN-29).
detached from the monopod and connected For details, consult your local Olympus sales representative.
to the remote control with an optional be recorded on the large-capacity
extension cable. This makes it possible to memory card.
continue an inspection without having to
move the main unit.
Data management (IPLEX SA)
Data management functions such as
thumbnail display, folder search and
erasing, moving and copying images can be
operated using the remote control.

Narrow insertion tubes

A variety of insertion tubes are available to suit different
observation purposes. The IPLEX Series includes the
narrow 4.4mm diameter insertion tube.

04 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 21
Accessories Industrial Videoscopes
Viewing Adaptors Engine Turning Tools 3D EYE-TREK STEREO MEASUREMENT (IPLEX SA STEREO MEASUREMENT)

These adaptors allow the eyepiece of a rigid borescope or flexible The Olympus Electronic Engine Turning Tool (OTT) can offer increased Olympus’s stereo measurement technology uses triangulation to
When the 3D Eye-Trek face-
fiberscope to be extended or angled for a more comfortable viewing speed and efficiency for all internal turbine inspections. Using a simple measure image information captured by two parallax lenses. With six
mounted display is connected to
position. hand held controller each blade can be precisely positioned for an different measurement modes available, high-precision measurement
the remote control, surface
optimal view, allowing single operator inspections. The Engine Turning capabilities are available from any angle.
contours that would normally be
Tool is designed to be attached to engines quickly and easily - the Distance:
difficult to detect can be observed Measures the total length of a defect or
engine-specific adaptor connect the drive motor directly to the engines’
in three dimensions where they zone of damage.
gearbox turning point or air starter position. Once connected the
can easily be interpreted. Point-to-Line:
operator can select rotation speed and direction (forward or reverse). Measure the distance between a
The Olympus Turning Tool is suitable for use on most turbine engines for hypothetical line between two designated
aerospace and power generation applications. positions and the required point.
Depth:
The Olympus Turning Tool uses an electric stepper motor rather than Measures the depth/height of corrosion,
compressed air, making its operation precise, quiet and efficient. The protrusion and indentation from a
range consists of four different models, depending on the specific engine hypothetical plane to the required point.
Lines:
requirements. Features include blade identification on an easy to read
Total length of a crack with complicated
LED, convenient foot switch, offering hands-free operation and many Left Right
contours can be measured by plotting
other specific features, outlined below. multiple positions.
3D Image Area:
● OTT-1 Calculates the area of a burn or zone of damage
■ IPLEX Equipment Components and Functions surrounded by multiple designated positions.
This turning tool package is a high specification unit. A complete kit
Profile:
includes a Central Processing Unit, Hand Controller, Foot Pedal, IPLEX SA IPLEX SA IPLEX IPLEX SX
■ Viewing Adaptors Specifications STEREO MEASUREMENT Hard-to-see irregularities are simulated with
Software Module, Engine Adaptor and all required cables. Features of Scope Variation computer graphics for easier analysis.
Adaptor Name Angle Arm Length / Magnification
this turning tool include video overlay, variable torque settings, Outer diameter Insertion tube length Product code
AK2-18-90 90° angle 18cm arm interchangeable engine adaptor, backlash compensation, blade counting ø4.4mm
3.5m IV7435A IV7435A IV7435 –
PC SOLUTION (IPLEX SA and SX PC COMPATIBILITY)
4.0m – – – IV7440X1
AK2-9-60 60° angle 9cm arm and tagging, auto indexing and adjustable rotation speed, direction and All aspects of inspection operation can be controlled with a PC
3.5m IV7635A IV7635A IV7635 IV7635X1
AK2-8-90 90° angle 8cm arm
dwell time. 5.0m IV7650A IV7650A IV7650 – connected to IPLEX via a USB cable. Stored image data can also be
ø6.0mm

AK2-79-90 90° angle 79cm arm ● OTT-2

(IPLEX SX 6.2mm) 7.5m IV7675A IV7675A IV7675 – transferred to a PC for more extensive processing and analysis.
9.6m IV7696A IV7696A IV7696 – Remote operation:
AK2-80-00 Direct Viewing 80cm arm This turning tool is specifically designed for the F100 engine. Features Basic Functions All IPLEX functions including angulation,
Interchangeable optical adaptor ✔ ✔ ✔ ✔
AK2-ZOOM Direct Viewing 1.5 to 3x magnification of this unit are the same as those of the OTT-1, but without the video image recording and data management can
4-way motorised angulation ✔ ✔ ✔ ✔ be operated from a connected PC.
AK-U Universal angle 7cm arm
overlay function. Tough Tapered Flex insertion tube ✔ ✔ ✔ ✔ Stereo measurement:
Scope length index line ✔ ✔ ✔ ✔
AK-VARI 90° angle 1.2/2.4x magnification (mirror image) ● OTT-3 ✔ ✔ ✔ ✔
You can concentrate on capturing images at
LCD monitor the inspection site. The image data can be
LS-10 Flexible twin viewing adaptor The OTT-3 is the most portable turning tool in the Olympus range. The LCD fixing device (monopod) ✔ ✔ ✔ ✔ downloaded to your PC for stereo
Remote controller ✔ ✔ ✔ ✔ measurement.
unit is simple yet effective, employing the same engine adaptor as in the
50-W metal-halide light source ✔ ✔ ✔ ✔ Database management:
POWER SUPPLY UNIT OTT-1 system. The use of these engine adaptor results in a turning tool Integrated shock-resistant case ✔ ✔ ✔ ✔ IPLEX MANAGER, an image management
with flexibility for use with a variety of engine configurations and
MAJ-522/PSU-PLUS inspection requirements. The base equipment can be expanded by the
Rod handle & casters
Vertical and horizontal operation
✔
✔
✔
✔
✔
✔
✔
✔
program provided with the IPLEX SA and
SX Series, allows you to quickly build an
The MAJ-522 power supply offers 110/230V auto switching AC input and addition of further engine adaptor, to make the equipment suitable for Insertion tube winding drum ✔ ✔ ✔ ✔ inspection database.
has on the rear of the unit x 2 XLR connectors and x 2 Hirose use on various engines at little extra cost. AC power supply ✔ ✔ ✔ ✔ Create and edit reports:
connectors for connection and operation of up to x 4 Olympus products. DC power supply ✔ ✔ ✔ ✔ IPLEX MANAGER includes a template
● OTT-4 Working channel – – –
ø1.7mm creation function so you can easily create
The MAJ-522 can be connected to a variety of Olympus products (IV7635X1 ONLY) your own report formats.
including the ILH-2, IV-6, IV6A, DSM-2 and IW-R1 can be mounted into The OTT-4 turning tool is a lightweight unit, targeted at specific engines, CCU Functions Send inspection data by e-mail:
the System Case 2 for maximum system portability. designed to achieve simple but efficient engine turning capabilities. Freeze ✔ ✔ ✔ ✔ IPLEX MANAGER’s e-mail function lets you
Note, however, that there is no compatibility with other turning tools in Seamless digital zoom ✔ ✔ ✔ ✔ send image data and measurement data by
The PSU-PLUS is a multi-input power supply with the same inputs Panning ✔ ✔ ✔ ✔ e-mail. This makes it much easier to share
the Olympus Range.
Exposure ✔ ✔ ✔ ✔ data for comprehensive checking and
and connections as the MAJ-522 but with the added advantage of
Brightness adjustment ✔ ✔ ✔ ✔ analysis.
both AC and DC input voltage. With a 12V input on the front of the
Gain ✔ ✔ ✔ ✔
PSU-PLUS, battery products can be connected to the PSU-PLUS and Enhancement ✔ ✔ ✔ ✔
■ IPLEX Optical Adaptor Specifications
offer stand-alone operation of the System Case 2. Comparison ✔ ✔ – ✔ Optical System Distal End
Scope Optical Adaptor Field of Direction of Outer Rigid distal
Menu language selection ✔ ✔ ✔ ✔ Depth of field F No.
view view diameter end length*
■ SPECIFICATIONS Video signal output ✔ ✔ ✔ ✔
AT40D-IV74 40º 200 ~∞mm 2.4 19.7mm
Video signal input ✔ ✔ – ✔
AT80D/NF-IV74 80º 8 ~∞mm 9.5 20.2mm
● MAJ-522 Audio signal output ✔ ✔ ✔ ✔
AT80D/FF-IV74 80º Forward 35 ~∞mm 3.1 20.1mm
Input Voltage: 100 to 240V AC Recording Management Functions
AT120D/NF-IV74 120º 4 ~190mm 9.2 20.2mm
Still image recording/playback ✔ ✔ – ✔ IV74 ø4.4mm
Input Frequency: 50/60Hz AT412D/FF-IV74 120º 25 ~∞mm 3.3 20.1mm
Audio recording/playback ✔ ✔ – ✔
Rated output: 12V DC 13.3A (DC Output Terminal 1,2; Max 3A) AT80S-IV74 80º 25 ~∞mm 3.7 23.1mm
Movie recording/playback ✔ ✔ – ✔ Slide
12V DC 13.3A (DC Output Terminal 3,4; Max 10A) AT120S/NF-IV74 120º 1 ~20mm 9.6 23.1mm
Removable medium ✔ ✔ – ✔
AT120S/FF-IV74 120º 6 ~∞mm 6.0 23.1mm
Power Consumption: Max 220W Thumbnail display ✔ ✔ – ✔
AT40D-IV76 40º 200 ~∞mm 2.4 19.3mm
Dimensions: 174(W) x 55(H) x 230(D) mm Image file operation ✔ ✔ – ✔ AT80D/NF-IV76 80º 8 ~∞mm 9.5 19.8mm
Weight: 2.6kg (5.8lb) Search fuction ✔ ✔ – ✔ AT80D/FF-IV76 80º Forward 35 ~∞mm 3.1 19.7mm
Image title entry ✔ ✔ – ✔ AT120D/NF-IV76 120º 4 ~190mm 9.2 19.8mm
USB terminal ✔ ✔ – ✔ ø6.0mm
● PSU-PLUS ✔ ✔ ✔ IV76
AT412D/FF-IV76 120º 25 ~∞mm 3.3 19.7mm
IPLEX MANAGER software – AT80S-IV76 80º 18~∞mm 4.0 25.2mm
Input Voltage: 85-32 / 170-265V AC (auto voltage select) Direct recording to PC ✔ ✔ – ✔ Slide
AT120S/NF-IV76 120º 1-25 ~∞mm 9.6 25.2mm
Input Frequency: 50/60Hz Recorded data transferring to PC ✔ ✔ – ✔ AT120S/FF-IV76 120º 5 ~∞mm 5.9 25.2mm
Rated output: 12V DC 13.3A (DC Output Terminal 1,2; Max 3A) Remote operation by PC ✔ ✔ – ✔ AT100D/100S-IV76 100º/100º Forward/Slide 2~150mm 7.0 27.2mm
12V DC 13.3A (DC Output Terminal 3,4; Max 10A) International Measurement Functions AT220D-IV76 220º Forward 3~100 mm 4.3 ø8.4mm 21.1mm
Pratt & Whitney General Electric SNECMA CFMI Rolls-Royce
Aero Engines Scalar measurement ✔ ✔ – ✔
Power Consumption: Max 220W JT8D CF34-8CI V2500 M88 CFM56-3 TAY/SPEY
* The rigid portion at the scope’s distal end when the adaptor is mounted
Stereo measurement (Distance) ✔ – – ✔
Dimensions: 174(W) x 55(H) x 230(D) mm JT8D Starter CFE738 OTT-2 V2500 CFM56-5 RB211-535 ✔ ✔ ■ IPLEX Operating Environment
Stereo measurement (Point-to-Line) – –
Weight: 2.3kg JT9D CF6-50 CFM56-7 RB211-524 Stereo measurement (Depth) ✔ – – ✔ ● IPLEX can be upgraded to IPLEX SA after purchase.
PW2000 CF6-80A TRENT500/600/700 ✔ ✔ ● IPLEX SA can be used for stereo measurement by purchasing a stereo measurement
Stereo measurement (Area/Lines) – –
PW4000 CF6-80C2 NON FADEC BR710 ✔ ✔ optical adaptor.
Stereo measurement (Profile) – –
F100 CF6-80C2 FADEC BR715 ● Operating temperature: Insertion tube:
Other Functions
OTT- F100 CF6-80C2 IDG RB199 ● Operating temperature: Insertion tube: In air: -25~80ºC* Under water: 10~30ºC
3D observation Option Option Option Option
F100 LP GE90 F402 Other parts than above: In air: 0~40ºC
TF30 F101 INDUSTRIAL TRENT ● Operating atmospheric pressure: Insertion tube: In air: 1013hPa (1atm)
F118 F108 RB211-24G DLE ■ Stereo Measurement Optical Adaptor Set Specifications In water: 1013~1985hPa (1~1.96atm) (IV7635,7670,7675 & 7696)
F110-100 501K Under water: 1013~1368hPa (1~1.35atm) (IV7435)
Optical System Distal End
OTT2 F110-100 Scope Set Name Optical Adaptor Other parts than above: In air: 1013hPa (1atm)
Field of Direction Outer Rigid distal
F404 view of view
Depth of field F No.
diameter end length* ● Liquid resistance: Insertion tube, remote control: Machine oil, light oil and 5% saline.
● Other parts than above: Machine oil, light oil and 5% saline.
TF39 MAJ-1044D AT60D/60D-IV74 60º Forward 5 ~∞mm 25.9mm
IV74 7.5 ø4.4mm ● Waterproof: Insertion tube: Can be used under water.
LM2500 MAJ-1044S AT50S/50S-IV74 50º Slide 4~∞mm 31.9mm
Drip-proof: Remote control, LCD monitor: Can be used in rain but cannot be used under water.
LM5000 MAJ-1046D AT60D/60D-IV76 60º Forward 5 ~∞mm 26.3mm
IV76 7.5 ø6.0mm Other parts than above: Neither waterproof nor drip-proof.
LM600 MAJ-1046S AT60S/60S-IV76 60º Slide 4~∞mm 30.7mm * Angulation to a large angle may become difficult under low temperatures.

20 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 05
Industrial Videoscopes Accessories

IPLEX SX SERIES
INDUSTRIAL VIDEOSCOPE SYSTEM
IPLEX SX 6.2mm (with channel) 35mm SLR CAMERA
IPLEX SX 4.4mm SC35 (Type 15)
Purpose-built to meet the specific requirements of gas turbine By using an optional OM Adaptor, images observed by an Olympus
inspection, the new IPLEX SX provides improved access to intricate Industrial fiberscope or borescope can be easily photographed with
engine interiors, enhanced hooking and retrieval operation for automatic exposure.
exceptional ease of use, together with all high-quality capabilities Note: Ordinary photography is not possible with this camera.
synonymous with Olympus, such as advanced observation performance
and proven stereo measurement.
● All features of the IPLEX SA unit including stereo measurement plus
working channel in 6.2mm model.
● Control unit can be removed from case for enhanced portability.

World’s slimmest (ø6.2mm) scope with channel

incorporated
With a diameter of only 6.2 mm, this is the world’s slimmest videoscope
to incorporate a working channel. The channel port can be mounted on
the remote control, further enhancing operability, while the hook
assembly features a highly responsive Olympus-original design that
optimizes hook operation for inspection of the second
nozzle guide vane of the F100 engine.
OM ADAPTORS
Interchangeable with ø4.4mm scope DIGITAL CAMERA ADAPTOR For connection of SC35 still camera to Fiberscopes and Rigid
The IPLEX SX range includes a ø4.4mm scope AI-DC3/AK-DC3 Borescopes.
(without a channel) that enables inspection of Now you can take advantage of the superior image quality and high
minute parts. Interchangeability between ø4.4mm resolution of an Olympus CAMEDIA digital camera to document your
scope and the ø6.2mm scope makes for a simple inspection results. Simply connect the camera to your Olympus Industrial 1 2 3 4 5 6
and very cost effective system. fiberscope or borescope via the AI-DC3 or AK-DC3 digital camera adaptor.
Images are available immediately and are ready-made for e-mail, insertion
Rigid Sleeve
into word processor documents, presentations and more.
Useful as an auxiliary insertion tool and ● Endoscopic images can be documented using the high-resolution
also makes the scope easier to handle. CAMEDIA digital camera.
Simply fit and lock the sleeve onto the tip of ● Fiberscope and borescope images can be turned into digital data at
the insertion tube. the touch of a button and downloaded to a PC without having to
make prints.
● An inspection site’s external view can be documented with the Scope OM adaptor Magnification ratio Brightness ratio

■ IPLEX SX Optical Adaptor Specifications camera alone, and the internal view can be documented when the IF3 Series SM-2S 1 1.0 1.0
Optimized for jet engine inspection Optical System Distal End camera is connected to the endoscope. IF7D3X3-26, 32
IF13D3-60, IF8D3X2-23
Scope Optical Adapter
Field Direction Depth F Outer Rigid distal Image Carriers SM-3S 2 1.375 0.529
Olympus’s innovative Tapered Flex
of view of view of field No. diameter end length*
technology is well known for its unequaled AT120D/NF-IV76X1 120º 4~190mm 9.2 20.6mm IF4D4/4S4, IF5D4X1 AI-3M 3 1.0 1.0
insertion capability. The IPLEX SX’s Forward IF6D4, IF8D4, IF11D4
AT120D/FF-IV76X1 120º 25~∞mm 3.3 20.5mm
IV7635X1 ø6.2mm IF4D5/4S5, IF6C5, IF6C5X1
Steel Mesh Resin Braided “Tough Tapered Flex” tube has been AT80S-IV76X1 80º
Side
18~∞mm 4.0 24.6mm IF8C5, IF11C5 AI-4M 4 1.319 0.575
coil interior tube exterior designed to provide optimum flexibility in AT120S-IV76X1 120º 5~∞mm 5.9 24.6mm
AT40D-IV74 40º 200~∞mm 2.4 19.7mm IF6PD4, IF2D4, IF2D5 SM-R 5 1.0 1.0
aircraft engine inspection and excellent Rigid Borescopes
AT80D/NF-IV74 80º 8~∞mm 9.5 20.2mm
resistance to crushing. AT80D/FF-IV74 80º Forward 35~∞mm 3.1 20.1mm
Small Diameter Borescopes
AK-1M 6 1.8 0.31
Modelscope
AT120D/NF-IV74 120º 4~190mm 9.2 20.2mm CAMEDIA digital camera connected to
IV7440X1 ø4.4mm
AT120D/FF-IV74 120º 25~∞mm 3.3 20.1mm Olympus Industrial fiberscope via AI-DC3
Various working tools available AT80S-IV74 80º 25~∞mm 3.7 23.1mm
Versatile tools are available to meet a wide AT120S/NF-IV74 120º Side 1~20mm 9.6 23.1mm C-MOUNT ADAPTORS
range of inspection requirements such as AT120S/FF-IV74 120º 6~∞mm 6.0 23.1mm For connection of TV cameras to Fiberscopes and Rigid Borescopes.
*The rigid portion at the scope’s distal end when the adapter is mounted
retrieval of foreign objects and dropped
objects. Snare basket, 3-prong grasper,
1 2 3 4 5 6 7 8 9 10 11 12
magnet and alligator forceps are available. ■ Stereo Measurement Optical Adaptor Set Specifications
Optical System Distal End
Scope Set Name Optical Adapter Field Direction Depth F Outer Rigid distal
of view of view of field No. diameter end length*
Belt holder for hands-free operation CAMEDIA digital camera connected to
MAJ~1241D AT60D/60D-IV76X1 60º Forward 5~∞mm 26.7mm
IV7635X1 7.5 ø6.2mm Olympus Industrial borescope via AK-DC3
The remote control with channel port MAJ~1241S AT60S/60S-IV76X1 60º Side 4~∞mm 32.4mm
mounted can be attached to a belt around MAJ~1244D AT60D/60D-IV74 60º Forward 5~∞mm 26.3mm
IV7440X1 7.5 ø4.4mm ■ Specifications
MAJ~1244S AT50S/50S-IV74 50º Side 4~∞mm 30.7mm
your waist. This allows you to operate the AI-DC3 AK-DC3 Scope C-Mount adaptor Magnification ratio Brightness ratio
scope without having to hold the remote IF4D5/4S5 Series 5 industrial rigid borescopes
IF3 Series MC-04 0.8 1.6
control, and leaves your hands totally free K12/17/27 (mini borescopes)
■ IPLEX SX Operating Environment IF5D4X1 IF7D3X3-26, 32 MC-05 1 1.0 1.0
X009/X012/X017/X025 (small diameter borescopes) IF13D3-60, IF8D3X2-23 MC-08 1.6 0.39
for other tasks when you’re not operating ● Operating temperature: Insertion tube: In air: -25~80ºC* Compatible scope
IF6C5X1 IF6PD4
2
Image Carriers MC-10 3 2.0 0.25
the remote control. Under water: 10~30ºC (IV7440X1 only)
IF8C5 IF2D5 AI-10C 0.8 1.56
Other parts than above: In air: 0~40ºC IF4D4/4S4, IF5D4X1 4
IF11C5 IF8D4X2/X3
● Operating atmospheric pressure: Insertion tube: In air: 1013hPa (1atm) IF6D4, IF8D4, IF11D4 AI-11C 5 1.0 1.0
In water: 1013~1418hPa (1~1.96atm) (IV7440X1 only) Connection with camera Screwed into tripod socket of camera*
Portable package design Other parts than above: In air:1013hPa (1atm) C-2000ZOOM/C-2020ZOOM/C-3030ZOOM/C-3100ZOOM/
IF4D5/4S5, IF6C5, IF6C5X1
IF8C5, IF11C5
AI-12C 6 1.51 0.44
Compatible camera AI-3C 7 2.0 0.25
● Liquid resistance: Insertion tube, channel port, remote control: C-4040ZOOM/C-4100ZOOM/C-3020ZOOM/C-4000ZOOM/C-5050ZOOM
An integrated all-in-one design offers Two components: stay-provided mount for scope eyepiece and AK2-3C 0.45 –
Machine oil, light oil and 5% saline is attached. Construction
superior portability and faster, more ● Other parts than above: The SX case outer finish is resistant to machine oil, light oil and 5% intermediate ring for camera filter thread. AK2-4C 0.6 –
IF6PD4, IF2D4, IF2D5 AK2-5C 0.75 1.8
efficient set-up and takedown. Removing saline is attached. Note: When the adaptor is connected to the fiberscope, interference between the fiberoptic matrix and Rigid Borescopes
8

● the LCD pixels may cause striped patterns (moiré). AK2-10C 9 1.0 1.0
the control unit from the case allows you to Waterproof: Insertion tube: Can be used under water (IV7440X1 only). Small Diameter Borescopes
Drip-proof: Remote control, LCD monitor, channel port: To prevent moiré, set the camera’s focus to manual mode. AK2-20C 10 1.35 0.55
carry the IPLEX SX on your shoulder, Modelscope
Can be used in rain but cannot be used under water. * When the adaptor is connected to the camera, the camera’s tripod socket cannot be used. MC-R44 11 1.85 0.3
enhancing mobility in confined spaces and Other parts than above: Neither waterproof nor drip-proof.
To secure the camera on a tripod, use the optional fiberscope holder (MB-936/MB-937) or borescope
MC-R58 12 2.4 0.17
tripod mount (KN-29).
elevated locations. * Angulation may be affected by extreme temperatures.

06 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 19
Pipe & Visual Inspection Systems Industrial Videoscopes

PIPE INSPECTION SYSTEM IV SYSTEM CASE 2

A wide range of videoscopes for specialist inspection
OLYMPUS PT400 The Olympus System Case 2 is a compact, portable, easy to use
Pipe inspection at distances up to 40 metres and interchangeable system that can contain a videoscope (up to a length of 7.5m), collection
camera heads for different pipe diameters. of tips, ILH-2B light source, choice of IV-6 or IV-6A camera control unit,
● 40m working length. high resolution LCD screen, IW-R1 or DSM-2 image management
● Immersible up to 3m. system and either a MAJ-522 or PSU-PLUS power supply for operation.
● Two interchangeable shock-resistant camera heads, 23mm diameter and SPECIFICATIONS
SERIES 6 VIDEOSCOPES
40mm diameter. Dimensions: 470(W) x 435(H) x 220(D) mm INDUSTRIAL VIDEOSCOPE
● Bottom indicating sensor built into the 40mm diameter camera head. Weight: 22kg (maximum depending on contents)
● Optional detachable centring devices keep the camera head in the Power Input: 110-230V 50-60Hz or 12V DC IV6C6-13/20/35/50/75
centre of the pipe.
● Compact integrated design with the cable drum and control unit.
IV8C6-20/35/50/75
● Can be powered by a car cigarette lighter and 12V DC battery. IV7D6X1-26 (NTSC type, LCD monitor mountable)
CAMERA HEAD OPTIONS IV7D6X2-26 (PAL type)
IV5C6X1-15
Series 6 videoscopes can be used in a wide variety of specialist
inspections, including F100 (IV7D6X1-26) and T700/CT-7 (IV5C6X1-15)
inspections.
● Full screen display.
● Four way angulation
● Tapered Flex (TF) Tube for enhanced insertion.
D23N (NTSC)/D23P (PAL)
● Five button remote operation.
● Diameters of 5.1mm, 6mm, 7.3mm (with Channel) and 8.4mm.
■ IV5C6, IV6C6 and IV8C6 Scope Specifications

IV5C6X1-15

IV6C6-13

IV6C6-20

IV6C6-35

IV6C6-50

IV6C6-75

IV8C6-20

IV8C6-35

IV8C6-50

IV8C6-75
Distal end Diameter ø5.1mm ø6.0mm ø8.4mm
D40N (NTSC)/D40P (PAL) Bending Angualtion 150º up/down MAJ-456 Rigid Sleeve
INFRA-RED TELESCOPIC CAMERA SYSTEM section
Flexibility
range direction
150º in up/down and right/left directions

Tapered flex tube

For large vessel inspection. The Infrared Telescopic Camera System Insertion
Minimum bending radius 30mm 50mm
■ Olympus PT400 Specifications tube
(IRTC) features a CCD camera with integral infrared illumination

1,340mm

2,040mm

3,540mm

5,030mm

7,530mm

2,010mm

3,510mm

5,000mm

7,500mm
Illumination system White LED illumination
Camera optical
Automatic adjustment by means of AGC and electric
mounted on a telescopic arm, together with a compact monitor and Working length 1,500mm
system Brightness adjustment system
shutter battery module. The complete system is supplied in a single rugged
Distal end: ø18mm
Outer diameter
Flexible portion (camera cable): ø9.0mm carrying case.
Insertion tube ■ IV5C6 Optical Adaptor Specifications The IV5C6 has short rigid section at the distal end,
Working length 40m ● Up to 12 metres viewing distance in darkness. for PT-6 inspection
Minimum bending radius R120mm Optical system Distal end
● Up to 2 hours battery life in continuous use.
Frame 480(W) x 480 (H) x 350(D) mm Field of Direction of Depth of field F No Outer Rigid distal
● High resolution monochrome monitor. view view diameter end length

m
Video signal NTSC, PAL 2 lines (RCA, BNC)

.9m
Cable drum
● Robust carrying case. Forward

26
Power supply 12V DC (operating voltage range:10.8~13.2V DC) AT120D-IV5C6X1 120º 14~100mm 5.2 17.5mm

2.7
.5m
(integrated with 5.1mm

R1
.7
17
Maximum power consumption Approx 6W (camera & LED) AT90S-IV5C6X1 90º Slide 12~100mm 5.2 22.8mm

R6
control unit)
Output power supply 1 line 12V DC, 2A (max)
Weight 14.5Kg ■ IV6C6 Optical Adaptor Specifications
Rated input 100~240V AC (50/60Hz) IV5C6X1 IV6C6
AC adaptor Optical system Distal end
Rated output 12V DC, 2.5A
Field of Direction of Depth of field F No Outer Rigid distal
Other Provided accessories Accessory storage case, AC adaptor, view view diameter end length*1
Video cable RCA-RCA
AT40D-IV6C6 40º 330 ~∞mm 3.0 26.9mm
AT80D/NF-IV6C6 80º 10 ~∞mm 13.0 27.5mm
AT80D/NF-IV6C6 80º Forward 34 ~∞mm 4.5 27.4mm
■ IV7D6X1/IV7D6X2 Scope Specifications
■ Camera Head for PT400 Specifications Field of view 120º
AT120D/NF-IV6C6 120º 5 ~∞mm 12.5 27.0mm Optical
D23N (NTSC) D23P D40N (NTSC)
(PAL) D40P (PAL)
AT120D/FF-IV6C6 120º 20 ~∞mm 5.5 26.9mm system Direction of view Forward viewing
Field of view 80º 100º ø6.0mm
Optical system Direction of view Forward AT80S-IV6C6 80º 23~200mm 5.0 32.3mm Depth of field 9 to 80mm
Depth of field 20mm~∞mm (adjustable focus) AT120S/NF-IV6C6 120º Side 1~9mm 15.5 32.3mm Outer diameter ø7.3mm
Distal end
Distal end Outer diameter 23mm 40mm AT120S/FF-IV6C6 120º 7~90mm 8.0 32.3mm Rigid distal end length 19.8mm
AT60D/60D-IV6C6*2 60º/60º Direct/Direct 7~30mm 9.3 38mm Insertion Bending section Angulation range 130º in up/down and right/left directions
● Operating temperature: Insertion tube: In air: 0~40ºC tube
AT60S/60S-IV6C6*2 60º/60º Side/Side 6~30mm 9.3 44mm Flexible portion (tube) Flexibility Tapered Flex Tube
● Operating pressure: In air: 1013hPa
Outer diameter ø7.3mm
In water: 1013~1114hPa ■ IV8C6 Optical Adaptor Specifications Working length 2,610mm
● Waterproof properties: Watertight design, waterproof structure (3m depth of water)
Corrosion of heat exchanger end plate Optical system Distal end Channel Inner diameter ø1.7mm
Field of Direction of Depth of field F No Outer Rigid distal Universal cord length 2,000mm
view view diameter end length*1
150 x 46 x 28mm (compact version) including illuminator
Size AT40D-IV8C6 40º 200 ~∞mm 2.5 26.2mm
230 x 46 x 28mm (standard version) including illuminator
AT80D-IV8C6 80º 40 ~∞mm 5.5 29.4mm
Custom Packaging Viewing head
Camera
Sensitivity
Monochrome, 380 x 420 lines resolution
0.2 lux at fl.2
Infrared LED array - 850nm (compact version)
AT120D/NF-IV8C6
AT120D/FF-IV8C6
120º
120º
Forward
5 ~∞mm 14.0
45 ~∞mm 3.0
29.6mm
29.3mm
■ MAJ-456 Rigid Sleeve Specifications
Field of view 120º
Illumination ø8.4mm Optical system Direction of view Side view
- 950nm (standard convert version) AT80S-IV8C6 80º 22 ~∞mm 6.0 36.4mm
Side Depth of field 7~80mm
Power 12V DC, supplied by battery within chest pouch AT120S-IV8C6 120º 3 ~55mm 16.0 35.8mm
Packaging Type Lightweight, telescopic AT120D/120S-IV8C6 120º/120º Forward/Side 5~∞mm/3~∞mm 5/9 28.0mm Insertion tube
Outer diameter ø8mm
AT60D/60D-IV8C6*2 60º/60º Forward/Forward 5~50mm/5~50mm 11/11 24.0mm Working length 338mm
Packaging has always been a very important part of the Olympus Telescopic Pole Length 435 - 1530mm (extended)
Weight 0.5kg (including camera head/ illuminator) *1 When the Adaptor is attached to the scope. Total length 420mm
product range. We have therefore standardised our packaging to suit *2 For 3D measurement.
Type Monochrome - CRT
various customer needs including dedicated customised packaging for Monitor Size 120 x 230 x 60mm with 4" screen
system configurations. Resolution 420 lines Series 6 systems can be conveniently ■ Operating Environment for Series 6 Videoscopes
Olympus can offer a variety of hardcase and softbag solutions. Type 12V 2.5Ah Cyclon, sealed lead acid packaged (see page 18 for details). ● Operating temperature: Insertion tube: In air: -10~80ºC (14~176ºF)*
Minimum: 2 hours continuous use (compact version) All systems require a control unit and In water: 10~30ºC (50~86ºF)**
Battery Run Time
1 hours continuous use (standard version) All portions except insertion tube: In air: 0~40ºC (32~104ºF)
Charge Time 2 hours provides 95% capacity, full charge approx 8 hours
can be used with digital image storage ● Operating pressure: Insertion tube:
Type Constant voltage devices (see page 8). In air: 1013hPa (normal pressure) (IV6C6/8C6)
Battery Charger Input 198 - 264V AC, 50Hz or 100 - 110V AC, 60Hz In water: 1013 (normal pressure)~1360hPa (1~1.35atm) (IV6C6/8C6-13,20,35)
Output 14.4V DC max, 2.2A 1013 (normal pressure)~1773hPa (1~1.75atm) (IV6C6/8C6-50,75)
Chest Pouch Padded nylon with sun shield. Neck and waist straps with quick release buckles All portions except insertion tube: In air: 1013hPa (1atm normal pressure)
Double skinned, toughtened ABS. Waterproof, with O ring seal and pressure ● Liquid resistance: Insertion tube: Withstands machine oil, light oil and 5% salt water
Carrying Case (10~30ºC or 50~86ºF) (normal temperature).
relief valve.
Telescopic pole with camera head/ illumination, control unit, 4" monochrome monitor, * At 50~80ºC atmosphere, use the instrument at a relative humidity of 40% or below. Using the instrument at a higher
Standard Set
1 x battery pack, battery charger, chest pouch, carrying case and instructions. humidity may cause equipment damage.
** Insertion tube of IV7D6 and IV5C6X1 scopes is splashproof, except for the channel of IV7D6, which is not fluid-proof.
Accessories Protective cover for camera head. Wrist strap.

18 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 07
Industrial Videoscopes Light Sources

SERIES 5
6 VIDEOSCOPES CONTROL UNIT FOR SERIES 6 & SERIES 5 VIDEOSCOPES TUNGSTEN HALOGEN LIGHT SOURCES LIGHT SOURCE
INDUSTRIAL VIDEOSCOPE
INDUSTRIAL VIDEOSCOPE CONTROL UNIT ILK-7/ILK-7A/ILK-7B KLS-131
IV6C5-110/160 IV-6A The ILK-7 range of light sources incorporates a 150W tungsten-halogen The KLS-131 light source can be used as a stand alone system or as
Loaded with every imaginable leading edge RVI function, the IV-6A is designed to lamp offering features necessary to meet most industrial needs. part of the modular borescope system. It is available with either XLR
The IV6C5 Series offers working lengths of up to 16 metres. make your inspections as efficient and effective as possible. SPECIFICATIONS connector or crocodile clips for car battery use.
● Remote control operation using the Series 6 scope’s “Five Button” control pad. Lamp: 150W tungsten-halogen SPECIFICATIONS
RADIATION RESISTANT VIDEOSCOPES ● Extended exposure time for darker areas. Weight: 2.3kg Lamp: 50W tungsten-halogen
● Automatic brightness adjustment.
IV6C5X1-75/110 ● Zooming and virtual scrolling (panning) with moving images.
Dimensions: 178 x 230 x 76mm Weight: 0.6kg
Power Supply: ILK-7 – 100-120V 50-60Hz, 115V 400Hz Dimensions: 137 x 53mm
The IV6C5X1 Series scopes are radiation-resistant up to ● Built-in image enhancement function.
● Compatible with Series 5 scopes when MAJ-565 adaptor is used. ILK-7A – 100-240V 50-60Hz, 115V 400Hz 12VDC Power Supply 12VDC
50Gy (5000 Rad).
● Compatible with fiberscopes and borescopes when OTC-6 C-Mount CCD ILK-7B – 100-240V 50-60Hz, 115V 400Hz Power Consumption: 80W
Camera is used (see below). Power Consumption: 190W max
SPECIFICATIONS
Voltage: 12V DC
Power Consumption:
24W maximum
Dimensions:
174(W) x 259(H) x 2241(D) mm
Weight: 1.5Kg

CONTROL UNIT FOR SERIES 6

INDUSTRIAL VIDEOSCOPE CONTROL UNIT
IV-6
This camera control unit (CCU) can display full screen, high-resolution images
captured by the scope on the monitor.
● Retainable white balance setting.
● Auto gain control function increases brightness in dark areas.
● Electric shutter automatically adjusts brightness on a monitor.
LIGHT SOURCE
LIGHT SOURCE ILK-M1
SPECIFICATIONS
Voltage: 12V DC ILK-D1 The ILK-M1 light source is specifically designed for use with X Series
Power Consumption: 8W The ILK-D1 portable light source has been specifically designed for use Small Diameter borescopes. It is battery powered and uses a 2.5V lamp.
■ IV6C5 Scope Specifications Dimensions: with a battery belt, being operated from a 12V supply. The light source SPECIFICATIONS
IV6C5-110 IV6C5-160 IV6C5X1-75 IV6C5X1-110 149(W) x 250(H) x 2240(D) mm has a large spring clip to enable it to be mounted on a belt or jacket Lamp: Tungsten-halogen
Field of view 60º/100º (convertible using optical adaptor) Weight: 1.1Kg pocket. Weight: 50g
Direction of view Direct/side viewing (convertible using optical adaptor) Dimensions: 2.8mm diameter
Optical system
SPECIFICATIONS
3~44mm/9~127mm/4~∞mm/6~∞mm/17~∞mm/32~∞mm
Depth of field*1
(convertible using optical adaptor) ACCESSORIES FOR SERIES 6 & SERIES 5 VIDEOSCOPES Lamp: 75W tungsten-halogen Power Supply 3VDC type battery
Illumination system Light guide system Quartz light guide system Weight: 0.6kg
DIGITAL STORAGE AND MEASUREMENT SYSTEM
Distal end Outer diameter ø6.0mm Dimensions: 140 x 80 x 60mm
Bending section
Insertion tube
Angulation range*2
Outer diameter
Up 90º / Down 90º
ø6.0mm (TF tube)
Up 120º/Down 120º Up 120º/Down 120º DSM-2 Power Supply 12VDC
Compact, lightweight and easy to use, this state of the art system offers an Power Consumption: 80W
Working length 11000mm 16000mm 7500mm 11000mm
Total length 11230mm 16230mm 7780mm 11230mm
impressive array of versatile functions to meet the most advanced RVI
Universal cord length 2000mm
requirements.
Carrying case Drum type case Attache type case Drum type case
● Easy to use, menu driven software for quick capture and storage of still video
images - up to 20 images along with accompanying audio annotations can be
*1 Depth of field refers to the scope-tip-to-object distance range within which the image is clearly focused.
*2 As the insertion tube is bent or looped, the range of angulation decreases. stored in the internal memory.
● Images and data can be down loaded to floppy disk or Smart-Media card for
later review of inspection results on a PC.
■ Guide Tube Specification ● A wide selection of image management functions include measure, recall, delete,
MH-905 MH-906 export and import.
Rigid distal length 10mm (distal end port length) ● All functions controllable from the DSM-2’s front panel or the control pad on the
Flexible Inner diameter ø6.8mm control section of an Olympus Series 6 Videoscope.
Insertion
tube
portion Outer diameter ø9.9mm ● Capable of controlling the Digital Measuring Borescope (see page 15).
Tapered flex tube SPECIFICATIONS
Working length 10845mm 15845mm Voltage: 12V DC
Total length 15845mm 16000mm Power Consumption:
Battery Options
24W maximum For portability, many Olympus Industrial light sources can be powered
● Operating temperature: Insertion tube: In air: 0~50ºC (32~122ºF)
Dimensions: from battery packs. Different models are available to suit individual
2174(W) x 40(H) x 2210(L) mm
In water: 10~30ºC (50~86ºF) LIGHT SOURCE needs, all including long life nickel-cadmium cells.
All portions except insertion tube: In air: 0~40ºC (32~104ºF) Weight: 900g (2lb)
● Operating pressure: Insertion tube:
INDUSTRIAL DIGITAL IMAGE RECORDER
ILK-D2
In air: 1013hPa (normal pressure) (IV6C5-110/IV6C5-160)
The ILK-D2 is a compact, portable light source powered from a 12V DC
In water: 1013 (normal pressure)~1773hPa (1~1.75atm) (IV6C5X1-75)
1013 (normal pressure)~2127hPa (1~2.1atm) (IV6C5-110) (IV6C5X1-110)
IW-R1 supply. It can be mounted on a belt using a spring clip.
1013 (normal pressure)~2634hPa (1~2.6atm) (IV6C5-160) Compact digital image recorder. SPECIFICATIONS The IC-2 belt incorporates a built-in
All portions except insertion tube: In air: 1013hPa (1atm normal pressure) ● Freeze, store and play modes available. charger which can be used from 100 and
Lamp: 100W tungsten-halogen
● Liquid resistance: Insertion tube: Withstands machine oil, light oil and 5% salt water. ● Picture quality selectable from three settings - HIGH, MIDDLE or LOW; a 230V supplies.
(10~30ºC or 50~86ºF) (normal temperature). Weight: 0.6kg
maximum of 99 still image frames can be recorded in LOW mode.
● Radioactivity resistance target value: 50Gy (5000Rad) (IV6C5X1-75/110)
● Images stored on a PCMCIA memory card can be down loaded to a PC.
Dimensions: 75 x 147 x 168mm
● Remote control operation using either the Series 6 scope’s “Five Button” control Power Supply 12VDC
Series 5 videoscopes require an IV-6A control unit and MAJ-565 adaptor for operation.
pad or the MAJ-539 wired remote controller. Power Consumption: 105W
SPECIFICATIONS
Voltage: 12V DC
Power Consumption: 9W
Dimensions: The ‘Lok-on’ belt uses separate battery
178(W) x 49(H) x 296(D) mm packs, to allow continuous use.
Weight: 1.7Kg (3.8lb)

C-MOUNT CCD CAMERA

OTC-6
Monitor observation with a fiberscope or borescope.
Zooming and other advanced
functions of the IV-6A are available
for fiberscopes and borescopes
when the OTC-6 C-Mount CCD
Camera is used.
(Note: the OTC-6 camera can be
used with IV-6A only)
08 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 17
Light Sources Industrial Fiberscopes

HIGH INTENSITY LIGHT SOURCES Slim diameters, superior optics and maximum flexibility for
ILH-2A/ILH-2B
The ILH-2A and ILH-2B light sources have a custom designed high ultimate control in industrial inspection
output 50W metal halide arc lamp. This produces nearly x 3 the output
of the ILK-7. The unit is small in size and as well as being used with
borescopes and fiberscopes, can be installed into the System Case 2 or
used separately
Both the ILH-2A and ILH-2B have two hirose power outputs offering a STRUCTURAL DRAWING
12VDC 2 amp total for operation of Olympus ancillary equipment.
SPECIFICATIONS
Lamp: 50W Metal Halide
Weight: 3kg
Dimensions: 173 x 235 x 85mm
Power Supply: ILH-2A – 110-230V 50-60Hz, 115V 400Hz Field of view
ILH-2B – 110-230V 50-60Hz, 115V 400Hz
(with AC Adaptor) 12VDC
Power Consumption: 100W max

High quality glass fibres for image transmission.

In remote visual inspection applications the choice of light source is vital. Observation through an eyepiece.
When deciding which is the most appropriate, consideration must be Each Olympus Industrial Fiberscope is comprised of the insertion tube
given to size, weight and light output. (the distal end, bending section* and flexible section), as well as the
The Olympus range of light sources have been designed to meet the control and eyepiece section. Image guide fibres, light guide fibres and
customers needs and requirements, from the high intensity range of light ILP-1 wires for tip angulation are all built in.
*The 0.6mm diameter IF6PD4 does not incorporate bending and control sections.
sources, which offer versatility and maximum light output, to the more The ILP-1 light source has been specifically designed for large void
economical, lower power consumption tungsten range. inspections. Incorporating the latest UHP lamp technology it is now the
brightest, most powerful light source ever produced by Olympus.
MAIN APPLICATIONS
● If viewing over longer distance, or in particularly dark areas, use a
high intensity light source, which incorporates an arc lamp, such as The ILP-1 has two hirose power outputs offering a 12VDC 4 amp total Ideal for internal inspection of piping, machinery,
metal halide or UHP. for operation of Olympus ancillary equipment.
structural members etc. Highly flexible for versatility
● If a lower cost light source is required, and viewing distance is SPECIFICATIONS
Lamp: 120W Ultra High Performance (UHP)
and multi-purpose applications.
smaller, then use a Tungsten halogen light source
● If using from a battery, or if low power consumption is required, then Weight: 4kg For inspecting:
a low wattage lamp (such as ILH-2B) will offer longest battery life. Dimensions: 197 x 288 x 105mm ● Inside water supply/drainage pipes and plant piping.
Power Supply: 100-120VAC, 200-240VAC, 115VAC 400Hz ● Inside engines of vehicles, aircraft etc.
Remember that a high intensity arc lamp will provide much more light Power Consumption: 230W max ● Inside machines such as motors and boilers.
than a Tungsten halogen lamp, particularly with small diameter
instruments. Contact your local distributor for selection advice, and try ● Inaccessible areas within steel towers, buildings etc.
the complete system on a typical application. ● Operating conditions of machines etc.

SPECTRAL OUTPUT (see Figure 1) MAIN FEATURES

The spectral output of a lamp details the amount of electro-magnetic High resolution
radiation produced across a range of wavelengths, from ultra-violet (UV), Original Olympus high-performance optics technology, such as high-
through the visible spectrum, to infra-red (IR). Radiation wavelengths are density glass fibre bundles, offers the world’s highest level of
expressed in nanometres (nm), one nanometre being 10–9 metres. fiberscopic resolution and bright, sharp images.
The visible spectrum is between approximately 390 and 770nm, with TF Tube with superior insertability
ultra-violet being below and infra-red being above this range. In order to IF5 Series scopes (except IF2D5) employ the proven TF (Tapered Flex)
give true colour images, the light source should have a relatively even Figure 1 - Chart showing colour output of different lamps Insertion Tube. Ideal for insertion into multiple-bend pipes, the
output across the visible spectrum. Ideally, the amount of IR radiation flexibility changes continuously - being highly flexible at the tip and
.9
produced should be minimised, as IR radiation is converted to heat, more rigid at the control section. As a result, IF5 Series scopes can
which may then require a dissipation system, adding cost, volume and 520nm easily be passed through bends and elbows. At the same time, the
weight to the light source. .8
gradually increasing rigidity of the tube as it approaches the control
section assures easier transmission of pushing/twisting strength after
The spectral outputs of the three most frequently used lamp types are the first bend. All scopes featuring the TF tube are marked with the
shown in Figure 1 and compared with that of the sun. .7 550nm logo shown below.

COLOUR TEMPERATURE
.6
The colour temperature of a lamp is an indication of its radiance and is
measured in degrees absolute (°K in SI units). 500nm
Tip angulation
.5 The distal end can be moved in either two or four directions, by hand-
Typically, tungsten-halogen lamps have a colour temperature of 3,200°K,
held controls (all models except 0.6mm diameter).
whilst metal-halide and UHP arc lamps are around 5,600°K. The colour
temperature of the sun is 5,900°K. .4
Interchangeable optical adaptors
TUNGSTEN HALOGEN X 600nm
Facilitate a wide variety of viewing angles and directions in just one
With tungsten-halogen lamps, the colour temperature can be reduced by
METAL HALIDE XX SUN scope (most models).
decreasing the voltage across the lamp filament. Some light sources use .3 X UHP
this method to adjust the ‘intensity’ of the light output. Unfortunately, this 490nm 700nm Fully waterproof insertion section
‘rheostat’ type control increases the ‘yellowing’ of the resultant illumination. Photo and video documentation
.2
For this reason, all Olympus light sources use a mechanical shutter to
control light output, as the full colour temperature of the lamp is preserved.
480nm
.1
POWER
470nm

A lamp’s power rating refers to the power required to operate it – it is not

∞

200000K
100000K
65000K

4800 K

36000K

28540K

23600K

19000K

15000K

10000K

.0 450nm
0

a direct indication of a lamp’s illumination power. For instance, a 50W 430nm

380nm

Y
metal-halide or UHP lamp will produce a higher illumination level (in X .0 .1 .2 .3 .4 .5 .6 .7 .8
output per unit area) than a 500W tungsten-halogen lamp.

16 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 09
Industrial Fiberscopes Industrial Rigid Borescopes

INDUSTRIAL FIBERSCOPES ■ IF6C5X1 Scope Specifications

IF6C5X1-8 IF6C5X1-13 IF6C5X1-20 IF6C5X1-30
IF6C5X1/IF8C5/IF11C5 Field of view 30º/60º/100º (convertible using optical adaptor)
Standard fiberscopes with excellent resolution. Optical system
Direction of view
Depth of field
Direct/side viewing (convertible using optical adaptor)
See optical adaptor specifications (fixed focus)
DIGITAL MEASURING MODULAR BORESCOPE
The Modular borescope consists of a compact 50W light source, viewing
Illumination system
Outer diameter
Light guide system
ø6.0mm
BORESCOPE SYSTEM arm and a variety of probes and mirror sheaths giving viewing options
Distal end
Distal end length 13.7mm The Olympus Digital Measuring Borescope (DMBS) is the first unavailable in conventional rigid systems.
Bending section Angulation range Up 120º, Down 120º, Right 100º, Left 100º endoscopic system capable of providing accurate and repeatable
Insertion tube Outer diameter ø6.0mm (TF tube) measurement data. This borescope is particularly usefull for hard to reach ares, such as
Working length 800mm 1300mm 2000mm 3000mm
Decisions which have major implications for operational efficiency and petrol and diesel engines and can be supplied as customised kits to suit
Total length 1065mm 1565mm 2265mm 3265mm user requirements in a small robust carrying case.
safety often rely on the measurement of defects and the monitoring and
Light guide cable length 2000mm
recording of component wear.
■ IF6C5X1 Optical Adaptor Specifications The Olympus DMBS has been designed to meet critical measurement
Field of view Direction of view Depth of field requirements, assisting in the creation of appropriate maintenance
Provided AT60D/FF-IF6C5 60º Direct viewing 11~ ∞mm
AT30D-IF6C5 30º 26~ 372mm
strategies.
AT60D/NF-IF6C5 60º Direct viewing 5~ 102mm ● The sensor-incorporating
AT100D-IF6C5 100º 4~ ∞mm
Optional
swing prism borescope
AT30S-IF6C5 30º 21~ 138mm
AT60S/NF-IF6C5 60º 4~ 85mm design allows you to
Side viewing
AT60S/FF-IF6C5 60º 9~ ∞mm measure both length and
AT100S-IF6C5 100º 4~ ∞mm depth when the scope is
■ IF8C5 Scope Specifications connected to the control
unit.
IF8C5-10 IF8C5-15 IF8C5-20 IF8C5-30
Field of view 30º/60º/100º (convertible using optical adaptor)
● All you have to do is focus
Direction of view Direct/side viewing (convertible using optical adaptor) and point the cursor at any
Optical system
Depth of field See optical adaptor specifications (fixed focus) two points on the subject.
Illumination system Light guide system It’s simple and easy, but
Outer diameter ø8.4mm guaranteed to provide you
Distal end
Distal end length 21.9mm with the highly accurate
Bending section Angulation range Up 120º, Down 120º, Right 100º, Left 100º measurement results you
Insertion tube Outer diameter ø8.4mm (TF tube)
need.
Working length 1000mm 1500mm 2000mm 3000mm
● The built-in swing
Total length 1250mm 1750mm 2250mm 3250mm
Light guide cable length 2000mm
prism at the distal
end allows you to
■ IF8C5 Optical Adaptor Specifications change the
Field of view Direction of view Depth of field direction of view
Provided AT60D/FF-IF8C5 60º Direct viewing 20~ ∞mm and the narrow 20º
AT30D/NF-IF8C5 30º 30~ 70mm
AT30D/FF-IF8C5 30º 60~ 250mm
field of view
■ Modular Borescopes Specifications
AT60D/NF-IF8C5 60º Direct viewing 9~ 50mm provides large,
AT100D/NF-IF8C5 100º 3~ 200mm Maximum Working Direction of Field of Minimum working
magnified images. Model diameter length view view length
AT100D/FF-IF8C5 100º 9~ ∞mm
Optional T060-031-090-50 6.0mm 311mm Lateral (090°) 50° 9 to 100mm
AT30S-IF8C5 30º 45~ 90mm T080-010-000-50 8.1mm 104mm Direct (000°) 50° 9 to 130mm
AT60S/NF-IF8C5 60º 8~ 40mm
T080-020-000-50 8.1mm 204mm Direct (000°) 50° 9 to 120mm
AT60S/FF-IF8C5 60º Side viewing 20~ 240mm
T080-030-000-50 8.1mm 305mm Direct (000°) 50° 9 to 100mm
AT100S/NF-IF8C5
AT100S/FF-IF8C5
100º
100º
3~ 140mm
9~ 200mm
DIGITAL MEASURING T086-010-090-50 8.8mm 104mm Lateral (090°) 50° 9 to 130mm

■ IF11C5 Scope Specifications BORESCOPE CONTROLLER T086-020-090-50

T086-030-090-50
8.8mm
8.8mm
204mm
305mm
Lateral (090°)
Lateral (090°)
50°
50°
9 to 120mm
9 to 100mm
IF11C5-10 IF11C5-20 IF11C5-30 The Digital Measuring Borescope Controller (DMBC) is compact, T086-010-110-50 8.8mm 104mm Retro (110°) 50° 9 to 130mm
Field of view 30º/60º/100º (convertible using optical adaptor) lightweight and simple to operate with cursor and functions controlled by T086-020-110-50 8.8mm 204mm Retro (110°) 50° 9 to 120mm

Optical system
Direction of view Direct/side viewing (convertible using optical adaptor) front panel buttons. All connections, including power for the Digital T086-030-110-50 8.8mm 305mm Retro (110°) 50° 9 to 100mm
Depth of field See optical adaptor specifications (fixed focus) Measuring Borescope, are direct to the controller making set-up quick T100-010-000-50 10.1mm 104mm Direct (000°) 50° 9 to 130mm
Illumination system Light guide system T100-020-000-50 10.1mm 204mm Direct (000°) 50° 9 to 120mm
and easy.
Outer diameter ø11.3mm T100-030-000-50 10.1mm 305mm Direct (000°) 50° 9 to 100mm
Distal end T100-010-090-50 10.2mm 106mm Lateral (090°) 50° 9 to 130mm
Distal end length 25.5mm The DMBC provides four
Bending section Angulation range Up 120º, Down 120º, Right 100º, Left 100º modes of measurement T100-020-090-50 10.2mm 204mm Lateral (090°) 50° 9 to 120mm
Insertion tube Outer diameter ø11.3mm (TF tube) T100-030-090-50 10.2mm 305mm Lateral (090°) 50° 9 to 100mm
including point-to-point linear,
Working length 1000mm 2000mm 3000mm
point to line, depth and 2D ■ Modular Borescope - Mirror Sheath Specifications
Total length 1250mm 2250mm 3250mm
Light guide cable length 2000mm
scaling. This covers the majority Maximum Working Direction of Field of Minimum working
of measurements for turbine Model diameter length view view length
■ IF11C5 Optical Adaptor Specifications applications such as crack MT086-010-090 8.7mm 105mm Lateral (090°) As probe 0 to 121mm
Field of view Direction of view Depth of field length, leading edge, MT086-020-090 8.7mm 207mm Lateral (090°) As probe 0 to 108mm
Provided AT60D/FF-IF11C5 60º Direct viewing 27~ 390mm MT086-030-090 8.7mm 306mm Lateral (090°) As probe 0 to 91mm
displacement, tip loss, FOD
AT30D/NF-IF11C5 30º 38~ 70mm MT110-010-090 11.2mm 106mm Lateral (090°) As probe 0 to 118mm
AT30D/FF-IF11C5 30º 65~ 120mm
depth and blade separation.
MT110-020-090 11.2mm 207mm Lateral (090°) As probe 0 to 108mm
AT60D/NF-IF11C5 60º Direct viewing 11~ 45mm MT110-030-090 11.2mm 306mm Lateral (090°) As probe 0 to 91mm
AT100D/NF-IF11C5 100º 5~ 40mm
AT100D/FF-IF11C5 100º 16~ 300mm
Optional ■ Digital Measuring Borescope System Specifications ■ Light Source Specifications
AT30S-IF11C5 30º 55~ 100mm
AT60S/NF-IF11C5 60º 11~ 40mm Outer diameter ø8.1mm Power Power Light output
Model Lamp Weight Dimensions supply consumption control
AT60S/FF-IF11C5 60º Side viewing 28~ 440mm
AT100S/NF-IF11C5 100º 3~ 22mm Working length 246mm, 446mm
50W
AT100S/FF-IF11C5 100º 12~ 250mm Insertion tube Direction of view 50º~110º Miniature 137mm long x Constant-colour
12V DC
Field of view 20º KLS-131 quartz 0.5kg 53mm diameter 55W temperature
±10%
■ IF6C5X1/IF8C5/IF11C5 Operating Environment halogen, (approx) variable shutter
● Operating temperature: Insertion tube: In air: -10~80ºC (14~176ºF) Measurement range 10~180mm 12V
In water: 10~30ºC (50~86ºF) ±4% (10-60mm Measurement range)
All portions except insertion tube: In air: 10~50ºC (14~122ºF) Measurement Accuracy
±8% (60-180mm Measurement range)
● Operating pressure: Insertion tube: In air/water: 1013~1317hPa (1~1.3atm) ■ Modular Borescope
All portions except insertion tube: In air: 1013hPa (1atm) ● Operating temperature: Probe/mirror sheath: –10 to +150°C (+14 to +302°F)
● Drip-proof control section for durable performance in adverse conditions. ● Operating temperature: Insertion tube: In air: -20~150ºC (-4~302ºF) Other parts: –10 to +40°C (+14 to +104°F)
● Fully waterproof insertion section for underwater use (corrosion-protected against machine oil, All portions except insertion tube: In air: 0~50ºC (32~122ºF) ● Operating pressure: Probe: In air: 0.7 to 1.7 bar (10.3 to 25 lbf/in2)
kerosene and 5% saline). ● Operating pressure: In air: 709~1722hPa (0.7~1.7atm) In water: 1.0 to 1.7 bar (14.7 to 25 lbf/in2)
In water: Up to 1722hPa (1.7atm) ● Fluid resistance: Probe and mirror sheath can be immersed for short periods in 5%
Note: As with any fiberscope, due to normal product characteristics all models may show a small ● Liquid resistance (insertion tube): Withstands aviation fuels, machine oil, light oil and 5% salt water, petrol, diesel, engine oil, brake fluid, ethylene glycol and
number of broken fibres. The angulation angle decreases as the scope is coiled. salt water (normal pressure). methanol (at +10ºC to +30°C, and atmospheric pressure)

10 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 15
 Industrial Rigid Borescopes Industrial Fiberscopes

SMALL DIAMETER BORESCOPES

Ultra-thin Borescopes, as small as 0.9mm diameter for extremely tight
spaces.
INDUSTRIAL FIBERSCOPES INDUSTRIAL FIBERSCOPE
For applications where access to the area of interest is only possible IF6PD4/IF2D5/IF4D5/IF4S5 IF5D4X1-14
through an aperture less than 4mm (0.16”), the Olympus range of
Ultra-thin diameters. Specifically for PT-6 engine inspection.
small diameter borescopes offers a wide choice of specifications.
These instruments are ideal for many applications, including the ■ IF5D4X1-14 Scope Specifications
inspection of electronic components, fine castings, fuel injectors and IF5D4X1-14
hydraulic systems. Field of view 49º
Direction of view Direct viewing (convertible using optical adaptor)
Optical system
Small diameter borescopes are available in 0.9, 1.2, 1.7, 2.5 or 2.7mm Depth of field 5~50mm
(0.04, 0.05, 0.07, 0.10, or 0.11”) diameter insertion tubes and up to K Series Illumination system Light guide system
250mm (10”) working length. The instruments’ direction of view can be Distal end Outer diameter ø5.0mm
direct (000º), fore-oblique (015º) or lateral (090º) and with the Bending section Angulation range Up 120º, Down 120º
introduction of a new range of instruments, two types of image Insertion tube Outer diameter ø5.0mm
■ Scope Specifications Working length 1200mm
transmission are available. IF6PD4-6 IF6PD4-11 IF2D5-6 IF2D5-12 IF4D5-7 IF4PD5-15 IF4S5-7 IF4S5-15 Total length 1440mm
Field of view 58º 75º 65º 60º
The X series range uses a high resolution fiber conduit image Light guide cable length 2000mm
Direction of view Direct viewing Side viewing
transmission system which provides excellent image quality and a Optical Depth of field 1 ~ 50mm 2 ~ 50mm 6 ~ 60mm 4 ~ 40mm ■ IF5D4X1-14 Optical Adaptor Specifications (supplied as standard)
more robust, semi-flexible insertion tube. This also allows smaller system (fixed focus) (fixed focus) (fixed focus) (fixed focus)
Optical adaptor Field of view Direction of view Depth of field
diameter models to be produced, including a new 0.9mm (0.04”) Illumination
system Light guide system AT50S-IF5D4x1 49º Side viewing 5~50mm
version which offers distinct advantages in some applications. K Series Outer diameter ø0.64mm ø2.4mm ø4.1mm ● Operating temperature: Insertion tube: In air: -10~80ºC (14~176ºF)
Distal end
models use a ‘Selfoc’ optical lens system which offers exceptional Distal end length – 6mm 8.5mm 11.3mm All portions except insertion tube: In air: 10~50ºC (14~122ºF)
image resolution and image brightness, but does not offer the same Bending Angulation ● Operating pressure: Insertion tube: In air: 1013hPa (1atm)
– Up 120º, Down 120º
section range
robustness as the fibre versions. INDUSTRIAL FIBERSCOPE
Insertion Outer ø0.64mm ø2..4mm ø4.1mm
Any one of the Olympus light sources can be used with the small tube diameter
Working length
(non-TF tube) (non-TF tube)
490mm 990mm 600mm 1170mm 700mm 1500mm 700mm 1500mm
(TF tube)
IF7D3X3-32
diameter borescopes including, on the X Series, the ILK-M1 - a Total length 670mm 1170mm 850mm 1420mm 910mm 1710mm 910mm 1710mm For F100 and JT9D
compact battery powered light source developed specifically for these Light guide cable length 2000mm 2200mm 2000mm inspection.
instruments. All instruments include a 32mm eyepiece, which ensures In air: 10~40ºC In air: 10~40ºC
(50~104ºF) (50~104ºF) In air: -10~80ºC (14~176ºF)
compatibility with the full range of borescope accessories, including Insertion tube In water: 10~30ºC In water: 10~40ºC
Operating In water: 10~30ºC (50~86ºF)
photographic, CCTV and viewing adaptors. temperature (50~86ºF) (50~104ºF)

All portions except

● Fibre Conduit (X Series) In air: 10~40ºC (50~104ºF) In air: -10~50ºC (14~122ºF)
insertion tube ■ IF7D3X3-32 Scope Specifications
Incorporates the very latest in condensed fibre conduit image X Series In air: In air/water: In air/water:
Insertion tube IF7D3X3-32
transmission technology, for high resolution and durability. Operating 1013hPa (1atm) 1013hPa (1atm) 1013hPa ~ 1165hPa (1~1.5atm)
pressure All portions except Field of view 66º
In air: 1013hPa (1atm) Direction of view Direct viewing
insertion tube
● Selfoc Lens (K Series) Optical system
Depth of field 8~∞mm (fixed focus)
● Waterproof insertion tube.
A continuous rigid rod lens for image transmission gives the Drip-proof control section (except IF6PD4). Illumination system Light guide system
highest resolution. Distal end Outer diameter ø7.3mm
INDUSTRIAL FIBERSCOPE (ultra-long) Bending section Angulation range Up 130º, Down 130º, Right 130º, Left 130º
Insertion tube Outer diameter ø7.3mm
IF13D3-60 Working length 3200mm
Extremely long fiberscope penetrates as deep as 6m. Total length 3455mm
Channel Inner diameter ø1.6mm
Insertion tube only Withstands gasoline, machine oil, light oil,
Durability
(except channel) 5% salt water

■ Small Diameter Borescope Specifications - X Series ● Operating temperature: Insertion tube: In air: -6~66ºC (21~150ºF)
All portions except insertion tube: -6~50ºC (21~122ºF)
Outer Working Field of
diameter length Direction of view view Depth of field ● Operating pressure: In air: 1013hPa (1atm)
Direct: 3 to infinity
ø0.9mm
60mm or
150mm
Direct (0º) or
Forward-oblique (15º)
70º INDUSTRIAL FIBERSCOPE
Forward-oblique: 2 to 7

ø1.2mm 60mm or Direct (0º) or

70º
Direct: 3 to infinity IF8D3X2-23/MD-999
150mm Forward-oblique (15º) Forward-oblique: 2 to 7 For JT8D jet engine inspection.
Direct (0º) or Direct: 4.5 to infinity
ø1.7mm 150mm or Forward-oblique (15º) 70º Forward-oblique: 3 to 12 ■ IF13D3-6000 Scope Specifications
250mm Lateral (90º) Lateral: 3 to 12 IF13D3-60
Direct: 4.5 to infinity Field of view 32º (convertible using optical adaptor)
Direct (0º) or
ø2.5mm 150mm or Forward-oblique (15º) 70º Forward-oblique: 3 to 12 Direction of view Direct viewing (convertible using optical adaptor)
250mm Optical system
Lateral (90º) Depth of field 1mm~∞ (adjustabl focus)
Lateral: 3 to 12
Illumination system Light guide system
■ Small Diameter Borescope Specifications - K Series Distal end Outer diameter ø11.3mm
Outer Working Field of Up 120º, Down 120º, Right 120º, Left 120º
Direction of view Depth of field Bending section Angulation range
diameter length view 90º (when looped once)
Direct (0º) or 45º Insertion tube Outer diameter ø13.5mm
ø1.2mm 96mm
Forward-oblique (15º) 53º Working length 6050mm
Total length 6340mm ■ IF8D3X2-23 Scope Specifications
96mm or Direct (0º) 62º Light guide cable length 1500mm IF8D3X2-23
186mm
Field of view 80º
■ IF13D3-6000 Optical Adaptor Specifications
Optical Direction of view Forward viewing
ø1.7mm 96mm or Forward-oblique (15º) 80º Optical system system Depth of field 8~∞mm
186mm All models 1mm - 40mm Field of view Direction of view Depth of field
Illumination system Light guide system
IF11D3-A20D 16º 13~ ∞mm
99mm or IF11D3-A40D 32º 6~ ∞mm Outer diameter ø8.4mm
Lateral (90º) 62º Distal end
188mm IF11D3-A60D 48º Direct viewing 3~ ∞mm Insertion Rigid distal end length 15.6mm
Direct (0º) 62º IF11D3-A80D 63º 2~ ∞mm tube Bending section Angulation range Up 185º, Down 105º, Right 105º, Left 105º
186mm IF11D3-A100D 76º 1~ ∞mm Insertion tube Outer diameter ø8.4mm
ø2.7mm Forward-oblique (15º) 80º
IF11D3-A20S 16º 13~ ∞mm Working length 2280mm
188mm Lateral (90º) 62º
IF11D3-A60S 48º 3~ ∞mm Total length 2500mm
Side viewing
IF11D3-A80S 63º 2~ ∞mm
● Operating temperature: Insertion tube: Light guide cable length 2000mm
In air: -10~80ºC (14~176ºF) IF11D3-A100S 76º 1~ ∞mm
In water: 10~30ºC (50~86ºF) ● Operating temperature: Insertion tube: In air: 10~80ºC (50~176ºF)
● Operating temperature: 10~80ºC (50~176ºF)
All portions except insertion tube: In air: -10~50ºC (14~122ºF) All portions except insertion tube: In air: 10~80ºC (50~176ºF)
● Operating pressure: 1013~1621hPa (1~1.6atm)
● Operating pressure: Insertion tube: In air/water: 1013hPa (1atm normal pressure) ● Operating pressure: In air: 1013hPa (1atm)
● Fully waterproof insertion section for underwater use (corrosion-protected against machine oil,
All portions except insertion tube: In air: 1013hPa (1atm normal pressure)
kerosene and 5% saline).

14 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 11
Industrial Rigid Borescopes Industrial Rigid Borescopes

Enhanced brightness and image clarity - the Series 5 industrial

rigid borescopes are ideal for eyeball or TV monitor inspection

STRUCTURAL DRAWING Rigid borescopes are used where there is straight line
access to the inspection area. They provide cost Borescope R120 - 039 - 090 - 35 ILG
effective solutions for applicatons as diverse as
maintenance, quality control, research, development : Series 5 Borescope : Direction of view degrees (eg 90º lateral)
and security. : Diameter 0.1mm (eg 12mm) : Field of view degrees (eg 35º)
: Working length cm (eg 39cm) : Integral light guide (12 & 16mm diameter only)
The Series 5 product design provides:
● Large, bright, clear, high-resolution images
● A wide range of robust, versatile instruments R040-021-000-60 R080-104-045-50 R100-067-045-50
● A fully integrated system R040-033-000-60 R080-124-045-50 R100-095-045-50
To satisfy customer and application requirements, the Olympus Series R040-022-045-60 R080-144-045-50 R100-025-090-35
R040-033-045-60 R080-024-090-50 R100-025-090-50
5 range also includes:
R040-022-090-60 R080-025-090-35 R100-029-090-10
● Series 5 Swing Prism Borescope R040-033-090-60 R080-028-090-10 R100-039-090-50
● Series 5 Zoom Swing Prism Borescope R080-034-090-50 R100-039-090-35
● Series 5 Engine Borescope R060-017-000-50 R080-035-090-35 R100-043-090-10
Unbeatable relay lens optics for sharp image R060-032-000-50 R080-044-090-50 R100-053-090-50
transmission with light guide fibres for bright illumination.
STANDARD SERIES 5 BORESCOPE R060-047-000-50 R080-045-090-35 R100-053-090-35
The Series 5 standard range is available in a choice of seven diameters R060-063-000-50 R080-048-090-10 R100-057-090-10
Wide selection available to suit any requirements. from 4-16mm. The standard range also offers varying lengths and R060-017-045-50 R080-054-090-50 R100-067-090-50
R060-032-045-50 R080-064-090-50 R100-067-090-35
Incorporating a multiple-element relay lens system in a durable stainless direction of view and field of view.
R060-047-045-50 R080-065-090-35 R100-081-090-35
steel insertion tube, Series 5 industrial rigid borescopes deliver superb R060-063-045-50 R080-074-090-50 R100-095-090-50
high-resolution images. Detachable light guide fibres transmit R060-017-090-50 R080-084-090-50 R100-095-090-35
illumination from a separate light source directly to the site. R060-032-090-50 R080-104-090-50 R100-099-110-50
R060-047-090-50 R080-124-090-50 R100-095-110-50
MAIN APPLICATIONS R060-063-090-50 R080-144-090-50
R060-078-090-50 R080-024-110-50 R120-039-090-35 ILG
Ideal for internal inspection of sites that can be R080-034-110-50 R120-053-090-35 ILG
accessed head-on with relatively shallow insertion. R080-024-000-50 R080-044-110-50
Excellent images are delivered by eye or when a TV R080-044-000-50 R080-054-110-50 R160-059-000-35 ILG
R080-064-000-50 R080-064-110-50 R160-101-000-35 ILG
camera is attached. SERIES 5 SWING PRISM BORESCOPE R080-084-000-50 R080-094-110-50 R160-143-000-35 ILG
For inspecting: R080-124-000-50 R080-104-110-50 R160-059-090-35 ILG
The Series 5 swing prism borescope has been designed to allow the R080-144-000-50 R080-124-110-50 R160-101-090-35 ILG
● Inside narrow-diameter holes and pipes. operator to scan a large area, saving time and expense. The direction of R080-024-045-50 R160-122-090-35 ILG
● Inside cast and hydraulic parts and honing-processed holes. viewing can be adjusted continuously between 45º to 115º, coupled with R080-044-045-50 R100-038-000-50 R160-143-090-35 ILG
● Inside aircraft engines, hollow walls or buildings, machinery, a field of view, this allows a total viewing arc of 120º to 140º. The Series R080-064-045-50 R100-066-000-50
structures etc. 5 Swing borescope is available in both 6mm and 8mm diameters. R080-084-045-50 R100-039-045-50

MAIN FEATURES
Ideal for TV monitor inspection Borescope R080 - 044 - 045SW115 - 50ZM25
Up to six times brighter images than
conventional models. : Series 5 Borescope : Direction of view degrees (eg 45º to 115º)
Clear, high-resolution images : Diameter 0.1mm (eg 8mm) : Field of view degrees (eg 50º)
: Working length cm (eg 44cm) : Field of view zoom range (eg 50º to 25º)
Excellent detail reproductions. Sharp (zoom models only)
image is easy on the eyes, helping
reduce inspector fatigue.
SERIES 5 ZOOM SWING PRISM BORESCOPE ■ Swing-Prism and Zoom Swing-Prism Specifications
Focus adjustment mechanism The Series 5 Zoom swing prism borescope has been added to the R060-023-045SW115-50 R080-043-045SW115-50
Easy to use focus control. successful swing prism range. It incorporates the same characteristics R060-031-045SW115-50 R080-044-045SW115-20
370º orbital scan as the standard swing prism, but with the added feature of 2 x optical R060-046-045SW115-50 R080-053-045SW115-50
zoom. This allows the user to zoom onto an object of interest, providing R060-077-045SW115-50 R080-063-045SW115-50
Upward pointer keeps you oriented when using R060-024-045SW115-50ZM25 R080-064-045SW115-20
the rotation function (except direct viewing a magnified view.
R060-032-045SW115-50ZM25 R080-083-045SW115-50
scopes and R160 models). R060-047-045SW115-50ZM25 R080-103-045SW115-50
Increased field of view R060-062-045SW115-50ZM25 R080-024-045SW115-50ZM25
R080-034-045SW115-50ZM25
32% larger field of view in 4mm ø models and R080-023-045SW115-50 R080-044-045SW115-50ZM25
96% larger field of view in 6mm ø models. R080-024-045SW115-20 R080-054-045SW115-50ZM25
Accurate image reproduction R080-033-045SW115-50 R080-064-045SW115-50ZM25
Distortion at image edges has been dramatically reduced.
■ Aero-engine Model Specifications
Even illumination
Instrument Engine Instrument Engine
New tip design ensures more even illumination even when viewing
close-range subjects. SERIES 5 ENGINE BORESCOPES R055-047-000-55 Pegasus R080-034-110-55 TRENT
The Series 5 engine borescope has been designed to meet R055-047-090-55 Pegasus/RB199 R100-017-090-35 TRENT
Outstanding durability manufacturer and user specification requirements specifically for a R055-085-090-55 Pegasus R100-024-090-35V CFM-56
Stainless steel insertion tube usable at temperatures between -20ºC and number of key military and commercial aero engines. R060-047-090-55 M88 RE080-012-090-60 CFM-56
150ºC as well as under pressure of up to 1.7 atmospheres. R060-047-060-30 M88 RE080-029-060-60 CFM-56
R060-032-070-40GI MTR-390 RE080-029-110-60 CFM-56
Ergonomic control section R055-017-090-60 MTR-390 RE100-041-090-35V GE-90
Extremely comfortable and functional. R080-025-110-35GI RTM-322 RE100-068-090-55 GE-90
R060-024-070-60 RTM-322 RE080-043-060-55 GE-90
Comprehensive range R080-024-060-50 RTM-322 RE080-043-110-55 GE-90
Almost 200 models available featuring various R080-041-070-60 TRENT
diameters, working lengths and viewing
directions and angles. Note: Many aero-engine inspections use standard or swing-prism borescopes. Contact our application
specialists for specific advice.

12 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 13
Industrial Rigid Borescopes Industrial Rigid Borescopes

Enhanced brightness and image clarity - the Series 5 industrial

rigid borescopes are ideal for eyeball or TV monitor inspection

STRUCTURAL DRAWING Rigid borescopes are used where there is straight line
access to the inspection area. They provide cost Borescope R120 - 039 - 090 - 35 ILG
effective solutions for applicatons as diverse as
maintenance, quality control, research, development : Series 5 Borescope : Direction of view degrees (eg 90º lateral)
and security. : Diameter 0.1mm (eg 12mm) : Field of view degrees (eg 35º)
: Working length cm (eg 39cm) : Integral light guide (12 & 16mm diameter only)
The Series 5 product design provides:
● Large, bright, clear, high-resolution images
● A wide range of robust, versatile instruments R040-021-000-60 R080-104-045-50 R100-067-045-50
● A fully integrated system R040-033-000-60 R080-124-045-50 R100-095-045-50
To satisfy customer and application requirements, the Olympus Series R040-022-045-60 R080-144-045-50 R100-025-090-35
R040-033-045-60 R080-024-090-50 R100-025-090-50
5 range also includes:
R040-022-090-60 R080-025-090-35 R100-029-090-10
● Series 5 Swing Prism Borescope R040-033-090-60 R080-028-090-10 R100-039-090-50
● Series 5 Zoom Swing Prism Borescope R080-034-090-50 R100-039-090-35
● Series 5 Engine Borescope R060-017-000-50 R080-035-090-35 R100-043-090-10
Unbeatable relay lens optics for sharp image R060-032-000-50 R080-044-090-50 R100-053-090-50
transmission with light guide fibres for bright illumination.
STANDARD SERIES 5 BORESCOPE R060-047-000-50 R080-045-090-35 R100-053-090-35
The Series 5 standard range is available in a choice of seven diameters R060-063-000-50 R080-048-090-10 R100-057-090-10
Wide selection available to suit any requirements. from 4-16mm. The standard range also offers varying lengths and R060-017-045-50 R080-054-090-50 R100-067-090-50
R060-032-045-50 R080-064-090-50 R100-067-090-35
Incorporating a multiple-element relay lens system in a durable stainless direction of view and field of view.
R060-047-045-50 R080-065-090-35 R100-081-090-35
steel insertion tube, Series 5 industrial rigid borescopes deliver superb R060-063-045-50 R080-074-090-50 R100-095-090-50
high-resolution images. Detachable light guide fibres transmit R060-017-090-50 R080-084-090-50 R100-095-090-35
illumination from a separate light source directly to the site. R060-032-090-50 R080-104-090-50 R100-099-110-50
R060-047-090-50 R080-124-090-50 R100-095-110-50
MAIN APPLICATIONS R060-063-090-50 R080-144-090-50
R060-078-090-50 R080-024-110-50 R120-039-090-35 ILG
Ideal for internal inspection of sites that can be R080-034-110-50 R120-053-090-35 ILG
accessed head-on with relatively shallow insertion. R080-024-000-50 R080-044-110-50
Excellent images are delivered by eye or when a TV R080-044-000-50 R080-054-110-50 R160-059-000-35 ILG
R080-064-000-50 R080-064-110-50 R160-101-000-35 ILG
camera is attached. SERIES 5 SWING PRISM BORESCOPE R080-084-000-50 R080-094-110-50 R160-143-000-35 ILG
For inspecting: R080-124-000-50 R080-104-110-50 R160-059-090-35 ILG
The Series 5 swing prism borescope has been designed to allow the R080-144-000-50 R080-124-110-50 R160-101-090-35 ILG
● Inside narrow-diameter holes and pipes. operator to scan a large area, saving time and expense. The direction of R080-024-045-50 R160-122-090-35 ILG
● Inside cast and hydraulic parts and honing-processed holes. viewing can be adjusted continuously between 45º to 115º, coupled with R080-044-045-50 R100-038-000-50 R160-143-090-35 ILG
● Inside aircraft engines, hollow walls or buildings, machinery, a field of view, this allows a total viewing arc of 120º to 140º. The Series R080-064-045-50 R100-066-000-50
structures etc. 5 Swing borescope is available in both 6mm and 8mm diameters. R080-084-045-50 R100-039-045-50

MAIN FEATURES
Ideal for TV monitor inspection Borescope R080 - 044 - 045SW115 - 50ZM25
Up to six times brighter images than
conventional models. : Series 5 Borescope : Direction of view degrees (eg 45º to 115º)
Clear, high-resolution images : Diameter 0.1mm (eg 8mm) : Field of view degrees (eg 50º)
: Working length cm (eg 44cm) : Field of view zoom range (eg 50º to 25º)
Excellent detail reproductions. Sharp (zoom models only)
image is easy on the eyes, helping
reduce inspector fatigue.
SERIES 5 ZOOM SWING PRISM BORESCOPE ■ Swing-Prism and Zoom Swing-Prism Specifications
Focus adjustment mechanism The Series 5 Zoom swing prism borescope has been added to the R060-023-045SW115-50 R080-043-045SW115-50
Easy to use focus control. successful swing prism range. It incorporates the same characteristics R060-031-045SW115-50 R080-044-045SW115-20
370º orbital scan as the standard swing prism, but with the added feature of 2 x optical R060-046-045SW115-50 R080-053-045SW115-50
zoom. This allows the user to zoom onto an object of interest, providing R060-077-045SW115-50 R080-063-045SW115-50
Upward pointer keeps you oriented when using R060-024-045SW115-50ZM25 R080-064-045SW115-20
the rotation function (except direct viewing a magnified view.
R060-032-045SW115-50ZM25 R080-083-045SW115-50
scopes and R160 models). R060-047-045SW115-50ZM25 R080-103-045SW115-50
Increased field of view R060-062-045SW115-50ZM25 R080-024-045SW115-50ZM25
R080-034-045SW115-50ZM25
32% larger field of view in 4mm ø models and R080-023-045SW115-50 R080-044-045SW115-50ZM25
96% larger field of view in 6mm ø models. R080-024-045SW115-20 R080-054-045SW115-50ZM25
Accurate image reproduction R080-033-045SW115-50 R080-064-045SW115-50ZM25
Distortion at image edges has been dramatically reduced.
■ Aero-engine Model Specifications
Even illumination
Instrument Engine Instrument Engine
New tip design ensures more even illumination even when viewing
close-range subjects. SERIES 5 ENGINE BORESCOPES R055-047-000-55 Pegasus R080-034-110-55 TRENT
The Series 5 engine borescope has been designed to meet R055-047-090-55 Pegasus/RB199 R100-017-090-35 TRENT
Outstanding durability manufacturer and user specification requirements specifically for a R055-085-090-55 Pegasus R100-024-090-35V CFM-56
Stainless steel insertion tube usable at temperatures between -20ºC and number of key military and commercial aero engines. R060-047-090-55 M88 RE080-012-090-60 CFM-56
150ºC as well as under pressure of up to 1.7 atmospheres. R060-047-060-30 M88 RE080-029-060-60 CFM-56
R060-032-070-40GI MTR-390 RE080-029-110-60 CFM-56
Ergonomic control section R055-017-090-60 MTR-390 RE100-041-090-35V GE-90
Extremely comfortable and functional. R080-025-110-35GI RTM-322 RE100-068-090-55 GE-90
R060-024-070-60 RTM-322 RE080-043-060-55 GE-90
Comprehensive range R080-024-060-50 RTM-322 RE080-043-110-55 GE-90
Almost 200 models available featuring various R080-041-070-60 TRENT
diameters, working lengths and viewing
directions and angles. Note: Many aero-engine inspections use standard or swing-prism borescopes. Contact our application
specialists for specific advice.

12 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 13
 Industrial Rigid Borescopes Industrial Fiberscopes

SMALL DIAMETER BORESCOPES

Ultra-thin Borescopes, as small as 0.9mm diameter for extremely tight
spaces.
INDUSTRIAL FIBERSCOPES INDUSTRIAL FIBERSCOPE
For applications where access to the area of interest is only possible IF6PD4/IF2D5/IF4D5/IF4S5 IF5D4X1-14
through an aperture less than 4mm (0.16”), the Olympus range of
Ultra-thin diameters. Specifically for PT-6 engine inspection.
small diameter borescopes offers a wide choice of specifications.
These instruments are ideal for many applications, including the ■ IF5D4X1-14 Scope Specifications
inspection of electronic components, fine castings, fuel injectors and IF5D4X1-14
hydraulic systems. Field of view 49º
Direction of view Direct viewing (convertible using optical adaptor)
Optical system
Small diameter borescopes are available in 0.9, 1.2, 1.7, 2.5 or 2.7mm Depth of field 5~50mm
(0.04, 0.05, 0.07, 0.10, or 0.11”) diameter insertion tubes and up to K Series Illumination system Light guide system
250mm (10”) working length. The instruments’ direction of view can be Distal end Outer diameter ø5.0mm
direct (000º), fore-oblique (015º) or lateral (090º) and with the Bending section Angulation range Up 120º, Down 120º
introduction of a new range of instruments, two types of image Insertion tube Outer diameter ø5.0mm
■ Scope Specifications Working length 1200mm
transmission are available. IF6PD4-6 IF6PD4-11 IF2D5-6 IF2D5-12 IF4D5-7 IF4PD5-15 IF4S5-7 IF4S5-15 Total length 1440mm
Field of view 58º 75º 65º 60º
The X series range uses a high resolution fiber conduit image Light guide cable length 2000mm
Direction of view Direct viewing Side viewing
transmission system which provides excellent image quality and a Optical Depth of field 1 ~ 50mm 2 ~ 50mm 6 ~ 60mm 4 ~ 40mm ■ IF5D4X1-14 Optical Adaptor Specifications (supplied as standard)
more robust, semi-flexible insertion tube. This also allows smaller system (fixed focus) (fixed focus) (fixed focus) (fixed focus)
Optical adaptor Field of view Direction of view Depth of field
diameter models to be produced, including a new 0.9mm (0.04”) Illumination
system Light guide system AT50S-IF5D4x1 49º Side viewing 5~50mm
version which offers distinct advantages in some applications. K Series Outer diameter ø0.64mm ø2.4mm ø4.1mm ● Operating temperature: Insertion tube: In air: -10~80ºC (14~176ºF)
Distal end
models use a ‘Selfoc’ optical lens system which offers exceptional Distal end length – 6mm 8.5mm 11.3mm All portions except insertion tube: In air: 10~50ºC (14~122ºF)
image resolution and image brightness, but does not offer the same Bending Angulation ● Operating pressure: Insertion tube: In air: 1013hPa (1atm)
– Up 120º, Down 120º
section range
robustness as the fibre versions. INDUSTRIAL FIBERSCOPE
Insertion Outer ø0.64mm ø2..4mm ø4.1mm
Any one of the Olympus light sources can be used with the small tube diameter
Working length
(non-TF tube) (non-TF tube)
490mm 990mm 600mm 1170mm 700mm 1500mm 700mm 1500mm
(TF tube)
IF7D3X3-32
diameter borescopes including, on the X Series, the ILK-M1 - a Total length 670mm 1170mm 850mm 1420mm 910mm 1710mm 910mm 1710mm For F100 and JT9D
compact battery powered light source developed specifically for these Light guide cable length 2000mm 2200mm 2000mm inspection.
instruments. All instruments include a 32mm eyepiece, which ensures In air: 10~40ºC In air: 10~40ºC
(50~104ºF) (50~104ºF) In air: -10~80ºC (14~176ºF)
compatibility with the full range of borescope accessories, including Insertion tube In water: 10~30ºC In water: 10~40ºC
Operating In water: 10~30ºC (50~86ºF)
photographic, CCTV and viewing adaptors. temperature (50~86ºF) (50~104ºF)

All portions except

● Fibre Conduit (X Series) In air: 10~40ºC (50~104ºF) In air: -10~50ºC (14~122ºF)
insertion tube ■ IF7D3X3-32 Scope Specifications
Incorporates the very latest in condensed fibre conduit image X Series In air: In air/water: In air/water:
Insertion tube IF7D3X3-32
transmission technology, for high resolution and durability. Operating 1013hPa (1atm) 1013hPa (1atm) 1013hPa ~ 1165hPa (1~1.5atm)
pressure All portions except Field of view 66º
In air: 1013hPa (1atm) Direction of view Direct viewing
insertion tube
● Selfoc Lens (K Series) Optical system
Depth of field 8~∞mm (fixed focus)
● Waterproof insertion tube.
A continuous rigid rod lens for image transmission gives the Drip-proof control section (except IF6PD4). Illumination system Light guide system
highest resolution. Distal end Outer diameter ø7.3mm
INDUSTRIAL FIBERSCOPE (ultra-long) Bending section Angulation range Up 130º, Down 130º, Right 130º, Left 130º
Insertion tube Outer diameter ø7.3mm
IF13D3-60 Working length 3200mm
Extremely long fiberscope penetrates as deep as 6m. Total length 3455mm
Channel Inner diameter ø1.6mm
Insertion tube only Withstands gasoline, machine oil, light oil,
Durability
(except channel) 5% salt water

■ Small Diameter Borescope Specifications - X Series ● Operating temperature: Insertion tube: In air: -6~66ºC (21~150ºF)
All portions except insertion tube: -6~50ºC (21~122ºF)
Outer Working Field of
diameter length Direction of view view Depth of field ● Operating pressure: In air: 1013hPa (1atm)
Direct: 3 to infinity
ø0.9mm
60mm or
150mm
Direct (0º) or
Forward-oblique (15º)
70º INDUSTRIAL FIBERSCOPE
Forward-oblique: 2 to 7

ø1.2mm 60mm or Direct (0º) or

70º
Direct: 3 to infinity IF8D3X2-23/MD-999
150mm Forward-oblique (15º) Forward-oblique: 2 to 7 For JT8D jet engine inspection.
Direct (0º) or Direct: 4.5 to infinity
ø1.7mm 150mm or Forward-oblique (15º) 70º Forward-oblique: 3 to 12 ■ IF13D3-6000 Scope Specifications
250mm Lateral (90º) Lateral: 3 to 12 IF13D3-60
Direct: 4.5 to infinity Field of view 32º (convertible using optical adaptor)
Direct (0º) or
ø2.5mm 150mm or Forward-oblique (15º) 70º Forward-oblique: 3 to 12 Direction of view Direct viewing (convertible using optical adaptor)
250mm Optical system
Lateral (90º) Depth of field 1mm~∞ (adjustabl focus)
Lateral: 3 to 12
Illumination system Light guide system
■ Small Diameter Borescope Specifications - K Series Distal end Outer diameter ø11.3mm
Outer Working Field of Up 120º, Down 120º, Right 120º, Left 120º
Direction of view Depth of field Bending section Angulation range
diameter length view 90º (when looped once)
Direct (0º) or 45º Insertion tube Outer diameter ø13.5mm
ø1.2mm 96mm
Forward-oblique (15º) 53º Working length 6050mm
Total length 6340mm ■ IF8D3X2-23 Scope Specifications
96mm or Direct (0º) 62º Light guide cable length 1500mm IF8D3X2-23
186mm
Field of view 80º
■ IF13D3-6000 Optical Adaptor Specifications
Optical Direction of view Forward viewing
ø1.7mm 96mm or Forward-oblique (15º) 80º Optical system system Depth of field 8~∞mm
186mm All models 1mm - 40mm Field of view Direction of view Depth of field
Illumination system Light guide system
IF11D3-A20D 16º 13~ ∞mm
99mm or IF11D3-A40D 32º 6~ ∞mm Outer diameter ø8.4mm
Lateral (90º) 62º Distal end
188mm IF11D3-A60D 48º Direct viewing 3~ ∞mm Insertion Rigid distal end length 15.6mm
Direct (0º) 62º IF11D3-A80D 63º 2~ ∞mm tube Bending section Angulation range Up 185º, Down 105º, Right 105º, Left 105º
186mm IF11D3-A100D 76º 1~ ∞mm Insertion tube Outer diameter ø8.4mm
ø2.7mm Forward-oblique (15º) 80º
IF11D3-A20S 16º 13~ ∞mm Working length 2280mm
188mm Lateral (90º) 62º
IF11D3-A60S 48º 3~ ∞mm Total length 2500mm
Side viewing
IF11D3-A80S 63º 2~ ∞mm
● Operating temperature: Insertion tube: Light guide cable length 2000mm
In air: -10~80ºC (14~176ºF) IF11D3-A100S 76º 1~ ∞mm
In water: 10~30ºC (50~86ºF) ● Operating temperature: Insertion tube: In air: 10~80ºC (50~176ºF)
● Operating temperature: 10~80ºC (50~176ºF)
All portions except insertion tube: In air: -10~50ºC (14~122ºF) All portions except insertion tube: In air: 10~80ºC (50~176ºF)
● Operating pressure: 1013~1621hPa (1~1.6atm)
● Operating pressure: Insertion tube: In air/water: 1013hPa (1atm normal pressure) ● Operating pressure: In air: 1013hPa (1atm)
● Fully waterproof insertion section for underwater use (corrosion-protected against machine oil,
All portions except insertion tube: In air: 1013hPa (1atm normal pressure)
kerosene and 5% saline).

14 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 11
Industrial Fiberscopes Industrial Rigid Borescopes

INDUSTRIAL FIBERSCOPES ■ IF6C5X1 Scope Specifications

IF6C5X1-8 IF6C5X1-13 IF6C5X1-20 IF6C5X1-30
IF6C5X1/IF8C5/IF11C5 Field of view 30º/60º/100º (convertible using optical adaptor)
Standard fiberscopes with excellent resolution. Optical system
Direction of view
Depth of field
Direct/side viewing (convertible using optical adaptor)
See optical adaptor specifications (fixed focus)
DIGITAL MEASURING MODULAR BORESCOPE
The Modular borescope consists of a compact 50W light source, viewing
Illumination system
Outer diameter
Light guide system
ø6.0mm
BORESCOPE SYSTEM arm and a variety of probes and mirror sheaths giving viewing options
Distal end
Distal end length 13.7mm The Olympus Digital Measuring Borescope (DMBS) is the first unavailable in conventional rigid systems.
Bending section Angulation range Up 120º, Down 120º, Right 100º, Left 100º endoscopic system capable of providing accurate and repeatable
Insertion tube Outer diameter ø6.0mm (TF tube) measurement data. This borescope is particularly usefull for hard to reach ares, such as
Working length 800mm 1300mm 2000mm 3000mm
Decisions which have major implications for operational efficiency and petrol and diesel engines and can be supplied as customised kits to suit
Total length 1065mm 1565mm 2265mm 3265mm user requirements in a small robust carrying case.
safety often rely on the measurement of defects and the monitoring and
Light guide cable length 2000mm
recording of component wear.
■ IF6C5X1 Optical Adaptor Specifications The Olympus DMBS has been designed to meet critical measurement
Field of view Direction of view Depth of field requirements, assisting in the creation of appropriate maintenance
Provided AT60D/FF-IF6C5 60º Direct viewing 11~ ∞mm
AT30D-IF6C5 30º 26~ 372mm
strategies.
AT60D/NF-IF6C5 60º Direct viewing 5~ 102mm ● The sensor-incorporating
AT100D-IF6C5 100º 4~ ∞mm
Optional
swing prism borescope
AT30S-IF6C5 30º 21~ 138mm
AT60S/NF-IF6C5 60º 4~ 85mm design allows you to
Side viewing
AT60S/FF-IF6C5 60º 9~ ∞mm measure both length and
AT100S-IF6C5 100º 4~ ∞mm depth when the scope is
■ IF8C5 Scope Specifications connected to the control
unit.
IF8C5-10 IF8C5-15 IF8C5-20 IF8C5-30
Field of view 30º/60º/100º (convertible using optical adaptor)
● All you have to do is focus
Direction of view Direct/side viewing (convertible using optical adaptor) and point the cursor at any
Optical system
Depth of field See optical adaptor specifications (fixed focus) two points on the subject.
Illumination system Light guide system It’s simple and easy, but
Outer diameter ø8.4mm guaranteed to provide you
Distal end
Distal end length 21.9mm with the highly accurate
Bending section Angulation range Up 120º, Down 120º, Right 100º, Left 100º measurement results you
Insertion tube Outer diameter ø8.4mm (TF tube)
need.
Working length 1000mm 1500mm 2000mm 3000mm
● The built-in swing
Total length 1250mm 1750mm 2250mm 3250mm
Light guide cable length 2000mm
prism at the distal
end allows you to
■ IF8C5 Optical Adaptor Specifications change the
Field of view Direction of view Depth of field direction of view
Provided AT60D/FF-IF8C5 60º Direct viewing 20~ ∞mm and the narrow 20º
AT30D/NF-IF8C5 30º 30~ 70mm
AT30D/FF-IF8C5 30º 60~ 250mm
field of view
■ Modular Borescopes Specifications
AT60D/NF-IF8C5 60º Direct viewing 9~ 50mm provides large,
AT100D/NF-IF8C5 100º 3~ 200mm Maximum Working Direction of Field of Minimum working
magnified images. Model diameter length view view length
AT100D/FF-IF8C5 100º 9~ ∞mm
Optional T060-031-090-50 6.0mm 311mm Lateral (090°) 50° 9 to 100mm
AT30S-IF8C5 30º 45~ 90mm T080-010-000-50 8.1mm 104mm Direct (000°) 50° 9 to 130mm
AT60S/NF-IF8C5 60º 8~ 40mm
T080-020-000-50 8.1mm 204mm Direct (000°) 50° 9 to 120mm
AT60S/FF-IF8C5 60º Side viewing 20~ 240mm
T080-030-000-50 8.1mm 305mm Direct (000°) 50° 9 to 100mm
AT100S/NF-IF8C5
AT100S/FF-IF8C5
100º
100º
3~ 140mm
9~ 200mm
DIGITAL MEASURING T086-010-090-50 8.8mm 104mm Lateral (090°) 50° 9 to 130mm

■ IF11C5 Scope Specifications BORESCOPE CONTROLLER T086-020-090-50

T086-030-090-50
8.8mm
8.8mm
204mm
305mm
Lateral (090°)
Lateral (090°)
50°
50°
9 to 120mm
9 to 100mm
IF11C5-10 IF11C5-20 IF11C5-30 The Digital Measuring Borescope Controller (DMBC) is compact, T086-010-110-50 8.8mm 104mm Retro (110°) 50° 9 to 130mm
Field of view 30º/60º/100º (convertible using optical adaptor) lightweight and simple to operate with cursor and functions controlled by T086-020-110-50 8.8mm 204mm Retro (110°) 50° 9 to 120mm

Optical system
Direction of view Direct/side viewing (convertible using optical adaptor) front panel buttons. All connections, including power for the Digital T086-030-110-50 8.8mm 305mm Retro (110°) 50° 9 to 100mm
Depth of field See optical adaptor specifications (fixed focus) Measuring Borescope, are direct to the controller making set-up quick T100-010-000-50 10.1mm 104mm Direct (000°) 50° 9 to 130mm
Illumination system Light guide system T100-020-000-50 10.1mm 204mm Direct (000°) 50° 9 to 120mm
and easy.
Outer diameter ø11.3mm T100-030-000-50 10.1mm 305mm Direct (000°) 50° 9 to 100mm
Distal end T100-010-090-50 10.2mm 106mm Lateral (090°) 50° 9 to 130mm
Distal end length 25.5mm The DMBC provides four
Bending section Angulation range Up 120º, Down 120º, Right 100º, Left 100º modes of measurement T100-020-090-50 10.2mm 204mm Lateral (090°) 50° 9 to 120mm
Insertion tube Outer diameter ø11.3mm (TF tube) T100-030-090-50 10.2mm 305mm Lateral (090°) 50° 9 to 100mm
including point-to-point linear,
Working length 1000mm 2000mm 3000mm
point to line, depth and 2D ■ Modular Borescope - Mirror Sheath Specifications
Total length 1250mm 2250mm 3250mm
Light guide cable length 2000mm
scaling. This covers the majority Maximum Working Direction of Field of Minimum working
of measurements for turbine Model diameter length view view length
■ IF11C5 Optical Adaptor Specifications applications such as crack MT086-010-090 8.7mm 105mm Lateral (090°) As probe 0 to 121mm
Field of view Direction of view Depth of field length, leading edge, MT086-020-090 8.7mm 207mm Lateral (090°) As probe 0 to 108mm
Provided AT60D/FF-IF11C5 60º Direct viewing 27~ 390mm MT086-030-090 8.7mm 306mm Lateral (090°) As probe 0 to 91mm
displacement, tip loss, FOD
AT30D/NF-IF11C5 30º 38~ 70mm MT110-010-090 11.2mm 106mm Lateral (090°) As probe 0 to 118mm
AT30D/FF-IF11C5 30º 65~ 120mm
depth and blade separation.
MT110-020-090 11.2mm 207mm Lateral (090°) As probe 0 to 108mm
AT60D/NF-IF11C5 60º Direct viewing 11~ 45mm MT110-030-090 11.2mm 306mm Lateral (090°) As probe 0 to 91mm
AT100D/NF-IF11C5 100º 5~ 40mm
AT100D/FF-IF11C5 100º 16~ 300mm
Optional ■ Digital Measuring Borescope System Specifications ■ Light Source Specifications
AT30S-IF11C5 30º 55~ 100mm
AT60S/NF-IF11C5 60º 11~ 40mm Outer diameter ø8.1mm Power Power Light output
Model Lamp Weight Dimensions supply consumption control
AT60S/FF-IF11C5 60º Side viewing 28~ 440mm
AT100S/NF-IF11C5 100º 3~ 22mm Working length 246mm, 446mm
50W
AT100S/FF-IF11C5 100º 12~ 250mm Insertion tube Direction of view 50º~110º Miniature 137mm long x Constant-colour
12V DC
Field of view 20º KLS-131 quartz 0.5kg 53mm diameter 55W temperature
±10%
■ IF6C5X1/IF8C5/IF11C5 Operating Environment halogen, (approx) variable shutter
● Operating temperature: Insertion tube: In air: -10~80ºC (14~176ºF) Measurement range 10~180mm 12V
In water: 10~30ºC (50~86ºF) ±4% (10-60mm Measurement range)
All portions except insertion tube: In air: 10~50ºC (14~122ºF) Measurement Accuracy
±8% (60-180mm Measurement range)
● Operating pressure: Insertion tube: In air/water: 1013~1317hPa (1~1.3atm) ■ Modular Borescope
All portions except insertion tube: In air: 1013hPa (1atm) ● Operating temperature: Probe/mirror sheath: –10 to +150°C (+14 to +302°F)
● Drip-proof control section for durable performance in adverse conditions. ● Operating temperature: Insertion tube: In air: -20~150ºC (-4~302ºF) Other parts: –10 to +40°C (+14 to +104°F)
● Fully waterproof insertion section for underwater use (corrosion-protected against machine oil, All portions except insertion tube: In air: 0~50ºC (32~122ºF) ● Operating pressure: Probe: In air: 0.7 to 1.7 bar (10.3 to 25 lbf/in2)
kerosene and 5% saline). ● Operating pressure: In air: 709~1722hPa (0.7~1.7atm) In water: 1.0 to 1.7 bar (14.7 to 25 lbf/in2)
In water: Up to 1722hPa (1.7atm) ● Fluid resistance: Probe and mirror sheath can be immersed for short periods in 5%
Note: As with any fiberscope, due to normal product characteristics all models may show a small ● Liquid resistance (insertion tube): Withstands aviation fuels, machine oil, light oil and 5% salt water, petrol, diesel, engine oil, brake fluid, ethylene glycol and
number of broken fibres. The angulation angle decreases as the scope is coiled. salt water (normal pressure). methanol (at +10ºC to +30°C, and atmospheric pressure)

10 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 15
Light Sources Industrial Fiberscopes

HIGH INTENSITY LIGHT SOURCES Slim diameters, superior optics and maximum flexibility for
ILH-2A/ILH-2B
The ILH-2A and ILH-2B light sources have a custom designed high ultimate control in industrial inspection
output 50W metal halide arc lamp. This produces nearly x 3 the output
of the ILK-7. The unit is small in size and as well as being used with
borescopes and fiberscopes, can be installed into the System Case 2 or
used separately
Both the ILH-2A and ILH-2B have two hirose power outputs offering a STRUCTURAL DRAWING
12VDC 2 amp total for operation of Olympus ancillary equipment.
SPECIFICATIONS
Lamp: 50W Metal Halide
Weight: 3kg
Dimensions: 173 x 235 x 85mm
Power Supply: ILH-2A – 110-230V 50-60Hz, 115V 400Hz Field of view
ILH-2B – 110-230V 50-60Hz, 115V 400Hz
(with AC Adaptor) 12VDC
Power Consumption: 100W max

High quality glass fibres for image transmission.

In remote visual inspection applications the choice of light source is vital. Observation through an eyepiece.
When deciding which is the most appropriate, consideration must be Each Olympus Industrial Fiberscope is comprised of the insertion tube
given to size, weight and light output. (the distal end, bending section* and flexible section), as well as the
The Olympus range of light sources have been designed to meet the control and eyepiece section. Image guide fibres, light guide fibres and
customers needs and requirements, from the high intensity range of light ILP-1 wires for tip angulation are all built in.
*The 0.6mm diameter IF6PD4 does not incorporate bending and control sections.
sources, which offer versatility and maximum light output, to the more The ILP-1 light source has been specifically designed for large void
economical, lower power consumption tungsten range. inspections. Incorporating the latest UHP lamp technology it is now the
brightest, most powerful light source ever produced by Olympus.
MAIN APPLICATIONS
● If viewing over longer distance, or in particularly dark areas, use a
high intensity light source, which incorporates an arc lamp, such as The ILP-1 has two hirose power outputs offering a 12VDC 4 amp total Ideal for internal inspection of piping, machinery,
metal halide or UHP. for operation of Olympus ancillary equipment.
structural members etc. Highly flexible for versatility
● If a lower cost light source is required, and viewing distance is SPECIFICATIONS
Lamp: 120W Ultra High Performance (UHP)
and multi-purpose applications.
smaller, then use a Tungsten halogen light source
● If using from a battery, or if low power consumption is required, then Weight: 4kg For inspecting:
a low wattage lamp (such as ILH-2B) will offer longest battery life. Dimensions: 197 x 288 x 105mm ● Inside water supply/drainage pipes and plant piping.
Power Supply: 100-120VAC, 200-240VAC, 115VAC 400Hz ● Inside engines of vehicles, aircraft etc.
Remember that a high intensity arc lamp will provide much more light Power Consumption: 230W max ● Inside machines such as motors and boilers.
than a Tungsten halogen lamp, particularly with small diameter
instruments. Contact your local distributor for selection advice, and try ● Inaccessible areas within steel towers, buildings etc.
the complete system on a typical application. ● Operating conditions of machines etc.

SPECTRAL OUTPUT (see Figure 1) MAIN FEATURES

The spectral output of a lamp details the amount of electro-magnetic High resolution
radiation produced across a range of wavelengths, from ultra-violet (UV), Original Olympus high-performance optics technology, such as high-
through the visible spectrum, to infra-red (IR). Radiation wavelengths are density glass fibre bundles, offers the world’s highest level of
expressed in nanometres (nm), one nanometre being 10–9 metres. fiberscopic resolution and bright, sharp images.
The visible spectrum is between approximately 390 and 770nm, with TF Tube with superior insertability
ultra-violet being below and infra-red being above this range. In order to IF5 Series scopes (except IF2D5) employ the proven TF (Tapered Flex)
give true colour images, the light source should have a relatively even Figure 1 - Chart showing colour output of different lamps Insertion Tube. Ideal for insertion into multiple-bend pipes, the
output across the visible spectrum. Ideally, the amount of IR radiation flexibility changes continuously - being highly flexible at the tip and
.9
produced should be minimised, as IR radiation is converted to heat, more rigid at the control section. As a result, IF5 Series scopes can
which may then require a dissipation system, adding cost, volume and 520nm easily be passed through bends and elbows. At the same time, the
weight to the light source. .8
gradually increasing rigidity of the tube as it approaches the control
section assures easier transmission of pushing/twisting strength after
The spectral outputs of the three most frequently used lamp types are the first bend. All scopes featuring the TF tube are marked with the
shown in Figure 1 and compared with that of the sun. .7 550nm logo shown below.

COLOUR TEMPERATURE
.6
The colour temperature of a lamp is an indication of its radiance and is
measured in degrees absolute (°K in SI units). 500nm
Tip angulation
.5 The distal end can be moved in either two or four directions, by hand-
Typically, tungsten-halogen lamps have a colour temperature of 3,200°K,
held controls (all models except 0.6mm diameter).
whilst metal-halide and UHP arc lamps are around 5,600°K. The colour
temperature of the sun is 5,900°K. .4
Interchangeable optical adaptors
TUNGSTEN HALOGEN X 600nm
Facilitate a wide variety of viewing angles and directions in just one
With tungsten-halogen lamps, the colour temperature can be reduced by
METAL HALIDE XX SUN scope (most models).
decreasing the voltage across the lamp filament. Some light sources use .3 X UHP
this method to adjust the ‘intensity’ of the light output. Unfortunately, this 490nm 700nm Fully waterproof insertion section
‘rheostat’ type control increases the ‘yellowing’ of the resultant illumination. Photo and video documentation
.2
For this reason, all Olympus light sources use a mechanical shutter to
control light output, as the full colour temperature of the lamp is preserved.
480nm
.1
POWER
470nm

A lamp’s power rating refers to the power required to operate it – it is not

∞

200000K
100000K
65000K

4800 K

36000K

28540K

23600K

19000K

15000K

10000K

.0 450nm
0

a direct indication of a lamp’s illumination power. For instance, a 50W 430nm

380nm

Y
metal-halide or UHP lamp will produce a higher illumination level (in X .0 .1 .2 .3 .4 .5 .6 .7 .8
output per unit area) than a 500W tungsten-halogen lamp.

16 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 09
Industrial Videoscopes Light Sources

SERIES 5
6 VIDEOSCOPES CONTROL UNIT FOR SERIES 6 & SERIES 5 VIDEOSCOPES TUNGSTEN HALOGEN LIGHT SOURCES LIGHT SOURCE
INDUSTRIAL VIDEOSCOPE
INDUSTRIAL VIDEOSCOPE CONTROL UNIT ILK-7/ILK-7A/ILK-7B KLS-131
IV6C5-110/160 IV-6A The ILK-7 range of light sources incorporates a 150W tungsten-halogen The KLS-131 light source can be used as a stand alone system or as
Loaded with every imaginable leading edge RVI function, the IV-6A is designed to lamp offering features necessary to meet most industrial needs. part of the modular borescope system. It is available with either XLR
The IV6C5 Series offers working lengths of up to 16 metres. make your inspections as efficient and effective as possible. SPECIFICATIONS connector or crocodile clips for car battery use.
● Remote control operation using the Series 6 scope’s “Five Button” control pad. Lamp: 150W tungsten-halogen SPECIFICATIONS
RADIATION RESISTANT VIDEOSCOPES ● Extended exposure time for darker areas. Weight: 2.3kg Lamp: 50W tungsten-halogen
● Automatic brightness adjustment.
IV6C5X1-75/110 ● Zooming and virtual scrolling (panning) with moving images.
Dimensions: 178 x 230 x 76mm Weight: 0.6kg
Power Supply: ILK-7 – 100-120V 50-60Hz, 115V 400Hz Dimensions: 137 x 53mm
The IV6C5X1 Series scopes are radiation-resistant up to ● Built-in image enhancement function.
● Compatible with Series 5 scopes when MAJ-565 adaptor is used. ILK-7A – 100-240V 50-60Hz, 115V 400Hz 12VDC Power Supply 12VDC
50Gy (5000 Rad).
● Compatible with fiberscopes and borescopes when OTC-6 C-Mount CCD ILK-7B – 100-240V 50-60Hz, 115V 400Hz Power Consumption: 80W
Camera is used (see below). Power Consumption: 190W max
SPECIFICATIONS
Voltage: 12V DC
Power Consumption:
24W maximum
Dimensions:
174(W) x 259(H) x 2241(D) mm
Weight: 1.5Kg

CONTROL UNIT FOR SERIES 6

INDUSTRIAL VIDEOSCOPE CONTROL UNIT
IV-6
This camera control unit (CCU) can display full screen, high-resolution images
captured by the scope on the monitor.
● Retainable white balance setting.
● Auto gain control function increases brightness in dark areas.
● Electric shutter automatically adjusts brightness on a monitor.
LIGHT SOURCE
LIGHT SOURCE ILK-M1
SPECIFICATIONS
Voltage: 12V DC ILK-D1 The ILK-M1 light source is specifically designed for use with X Series
Power Consumption: 8W The ILK-D1 portable light source has been specifically designed for use Small Diameter borescopes. It is battery powered and uses a 2.5V lamp.
■ IV6C5 Scope Specifications Dimensions: with a battery belt, being operated from a 12V supply. The light source SPECIFICATIONS
IV6C5-110 IV6C5-160 IV6C5X1-75 IV6C5X1-110 149(W) x 250(H) x 2240(D) mm has a large spring clip to enable it to be mounted on a belt or jacket Lamp: Tungsten-halogen
Field of view 60º/100º (convertible using optical adaptor) Weight: 1.1Kg pocket. Weight: 50g
Direction of view Direct/side viewing (convertible using optical adaptor) Dimensions: 2.8mm diameter
Optical system
SPECIFICATIONS
3~44mm/9~127mm/4~∞mm/6~∞mm/17~∞mm/32~∞mm
Depth of field*1
(convertible using optical adaptor) ACCESSORIES FOR SERIES 6 & SERIES 5 VIDEOSCOPES Lamp: 75W tungsten-halogen Power Supply 3VDC type battery
Illumination system Light guide system Quartz light guide system Weight: 0.6kg
DIGITAL STORAGE AND MEASUREMENT SYSTEM
Distal end Outer diameter ø6.0mm Dimensions: 140 x 80 x 60mm
Bending section
Insertion tube
Angulation range*2
Outer diameter
Up 90º / Down 90º
ø6.0mm (TF tube)
Up 120º/Down 120º Up 120º/Down 120º DSM-2 Power Supply 12VDC
Compact, lightweight and easy to use, this state of the art system offers an Power Consumption: 80W
Working length 11000mm 16000mm 7500mm 11000mm
Total length 11230mm 16230mm 7780mm 11230mm
impressive array of versatile functions to meet the most advanced RVI
Universal cord length 2000mm
requirements.
Carrying case Drum type case Attache type case Drum type case
● Easy to use, menu driven software for quick capture and storage of still video
images - up to 20 images along with accompanying audio annotations can be
*1 Depth of field refers to the scope-tip-to-object distance range within which the image is clearly focused.
*2 As the insertion tube is bent or looped, the range of angulation decreases. stored in the internal memory.
● Images and data can be down loaded to floppy disk or Smart-Media card for
later review of inspection results on a PC.
■ Guide Tube Specification ● A wide selection of image management functions include measure, recall, delete,
MH-905 MH-906 export and import.
Rigid distal length 10mm (distal end port length) ● All functions controllable from the DSM-2’s front panel or the control pad on the
Flexible Inner diameter ø6.8mm control section of an Olympus Series 6 Videoscope.
Insertion
tube
portion Outer diameter ø9.9mm ● Capable of controlling the Digital Measuring Borescope (see page 15).
Tapered flex tube SPECIFICATIONS
Working length 10845mm 15845mm Voltage: 12V DC
Total length 15845mm 16000mm Power Consumption:
Battery Options
24W maximum For portability, many Olympus Industrial light sources can be powered
● Operating temperature: Insertion tube: In air: 0~50ºC (32~122ºF)
Dimensions: from battery packs. Different models are available to suit individual
2174(W) x 40(H) x 2210(L) mm
In water: 10~30ºC (50~86ºF) LIGHT SOURCE needs, all including long life nickel-cadmium cells.
All portions except insertion tube: In air: 0~40ºC (32~104ºF) Weight: 900g (2lb)
● Operating pressure: Insertion tube:
INDUSTRIAL DIGITAL IMAGE RECORDER
ILK-D2
In air: 1013hPa (normal pressure) (IV6C5-110/IV6C5-160)
The ILK-D2 is a compact, portable light source powered from a 12V DC
In water: 1013 (normal pressure)~1773hPa (1~1.75atm) (IV6C5X1-75)
1013 (normal pressure)~2127hPa (1~2.1atm) (IV6C5-110) (IV6C5X1-110)
IW-R1 supply. It can be mounted on a belt using a spring clip.
1013 (normal pressure)~2634hPa (1~2.6atm) (IV6C5-160) Compact digital image recorder. SPECIFICATIONS The IC-2 belt incorporates a built-in
All portions except insertion tube: In air: 1013hPa (1atm normal pressure) ● Freeze, store and play modes available. charger which can be used from 100 and
Lamp: 100W tungsten-halogen
● Liquid resistance: Insertion tube: Withstands machine oil, light oil and 5% salt water. ● Picture quality selectable from three settings - HIGH, MIDDLE or LOW; a 230V supplies.
(10~30ºC or 50~86ºF) (normal temperature). Weight: 0.6kg
maximum of 99 still image frames can be recorded in LOW mode.
● Radioactivity resistance target value: 50Gy (5000Rad) (IV6C5X1-75/110)
● Images stored on a PCMCIA memory card can be down loaded to a PC.
Dimensions: 75 x 147 x 168mm
● Remote control operation using either the Series 6 scope’s “Five Button” control Power Supply 12VDC
Series 5 videoscopes require an IV-6A control unit and MAJ-565 adaptor for operation.
pad or the MAJ-539 wired remote controller. Power Consumption: 105W
SPECIFICATIONS
Voltage: 12V DC
Power Consumption: 9W
Dimensions: The ‘Lok-on’ belt uses separate battery
178(W) x 49(H) x 296(D) mm packs, to allow continuous use.
Weight: 1.7Kg (3.8lb)

C-MOUNT CCD CAMERA

OTC-6
Monitor observation with a fiberscope or borescope.
Zooming and other advanced
functions of the IV-6A are available
for fiberscopes and borescopes
when the OTC-6 C-Mount CCD
Camera is used.
(Note: the OTC-6 camera can be
used with IV-6A only)
08 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 17
Pipe & Visual Inspection Systems Industrial Videoscopes

PIPE INSPECTION SYSTEM IV SYSTEM CASE 2

A wide range of videoscopes for specialist inspection
OLYMPUS PT400 The Olympus System Case 2 is a compact, portable, easy to use
Pipe inspection at distances up to 40 metres and interchangeable system that can contain a videoscope (up to a length of 7.5m), collection
camera heads for different pipe diameters. of tips, ILH-2B light source, choice of IV-6 or IV-6A camera control unit,
● 40m working length. high resolution LCD screen, IW-R1 or DSM-2 image management
● Immersible up to 3m. system and either a MAJ-522 or PSU-PLUS power supply for operation.
● Two interchangeable shock-resistant camera heads, 23mm diameter and SPECIFICATIONS
SERIES 6 VIDEOSCOPES
40mm diameter. Dimensions: 470(W) x 435(H) x 220(D) mm INDUSTRIAL VIDEOSCOPE
● Bottom indicating sensor built into the 40mm diameter camera head. Weight: 22kg (maximum depending on contents)
● Optional detachable centring devices keep the camera head in the Power Input: 110-230V 50-60Hz or 12V DC IV6C6-13/20/35/50/75
centre of the pipe.
● Compact integrated design with the cable drum and control unit.
IV8C6-20/35/50/75
● Can be powered by a car cigarette lighter and 12V DC battery. IV7D6X1-26 (NTSC type, LCD monitor mountable)
CAMERA HEAD OPTIONS IV7D6X2-26 (PAL type)
IV5C6X1-15
Series 6 videoscopes can be used in a wide variety of specialist
inspections, including F100 (IV7D6X1-26) and T700/CT-7 (IV5C6X1-15)
inspections.
● Full screen display.
● Four way angulation
● Tapered Flex (TF) Tube for enhanced insertion.
D23N (NTSC)/D23P (PAL)
● Five button remote operation.
● Diameters of 5.1mm, 6mm, 7.3mm (with Channel) and 8.4mm.
■ IV5C6, IV6C6 and IV8C6 Scope Specifications

IV5C6X1-15

IV6C6-13

IV6C6-20

IV6C6-35

IV6C6-50

IV6C6-75

IV8C6-20

IV8C6-35

IV8C6-50

IV8C6-75
Distal end Diameter ø5.1mm ø6.0mm ø8.4mm
D40N (NTSC)/D40P (PAL) Bending Angualtion 150º up/down MAJ-456 Rigid Sleeve
INFRA-RED TELESCOPIC CAMERA SYSTEM section
Flexibility
range direction
150º in up/down and right/left directions

Tapered flex tube

For large vessel inspection. The Infrared Telescopic Camera System Insertion
Minimum bending radius 30mm 50mm
■ Olympus PT400 Specifications tube
(IRTC) features a CCD camera with integral infrared illumination

1,340mm

2,040mm

3,540mm

5,030mm

7,530mm

2,010mm

3,510mm

5,000mm

7,500mm
Illumination system White LED illumination
Camera optical
Automatic adjustment by means of AGC and electric
mounted on a telescopic arm, together with a compact monitor and Working length 1,500mm
system Brightness adjustment system
shutter battery module. The complete system is supplied in a single rugged
Distal end: ø18mm
Outer diameter
Flexible portion (camera cable): ø9.0mm carrying case.
Insertion tube ■ IV5C6 Optical Adaptor Specifications The IV5C6 has short rigid section at the distal end,
Working length 40m ● Up to 12 metres viewing distance in darkness. for PT-6 inspection
Minimum bending radius R120mm Optical system Distal end
● Up to 2 hours battery life in continuous use.
Frame 480(W) x 480 (H) x 350(D) mm Field of Direction of Depth of field F No Outer Rigid distal
● High resolution monochrome monitor. view view diameter end length

m
Video signal NTSC, PAL 2 lines (RCA, BNC)

.9m
Cable drum
● Robust carrying case. Forward

26
Power supply 12V DC (operating voltage range:10.8~13.2V DC) AT120D-IV5C6X1 120º 14~100mm 5.2 17.5mm

2.7
.5m
(integrated with 5.1mm

R1
.7
17
Maximum power consumption Approx 6W (camera & LED) AT90S-IV5C6X1 90º Slide 12~100mm 5.2 22.8mm

R6
control unit)
Output power supply 1 line 12V DC, 2A (max)
Weight 14.5Kg ■ IV6C6 Optical Adaptor Specifications
Rated input 100~240V AC (50/60Hz) IV5C6X1 IV6C6
AC adaptor Optical system Distal end
Rated output 12V DC, 2.5A
Field of Direction of Depth of field F No Outer Rigid distal
Other Provided accessories Accessory storage case, AC adaptor, view view diameter end length*1
Video cable RCA-RCA
AT40D-IV6C6 40º 330 ~∞mm 3.0 26.9mm
AT80D/NF-IV6C6 80º 10 ~∞mm 13.0 27.5mm
AT80D/NF-IV6C6 80º Forward 34 ~∞mm 4.5 27.4mm
■ IV7D6X1/IV7D6X2 Scope Specifications
■ Camera Head for PT400 Specifications Field of view 120º
AT120D/NF-IV6C6 120º 5 ~∞mm 12.5 27.0mm Optical
D23N (NTSC) D23P D40N (NTSC)
(PAL) D40P (PAL)
AT120D/FF-IV6C6 120º 20 ~∞mm 5.5 26.9mm system Direction of view Forward viewing
Field of view 80º 100º ø6.0mm
Optical system Direction of view Forward AT80S-IV6C6 80º 23~200mm 5.0 32.3mm Depth of field 9 to 80mm
Depth of field 20mm~∞mm (adjustable focus) AT120S/NF-IV6C6 120º Side 1~9mm 15.5 32.3mm Outer diameter ø7.3mm
Distal end
Distal end Outer diameter 23mm 40mm AT120S/FF-IV6C6 120º 7~90mm 8.0 32.3mm Rigid distal end length 19.8mm
AT60D/60D-IV6C6*2 60º/60º Direct/Direct 7~30mm 9.3 38mm Insertion Bending section Angulation range 130º in up/down and right/left directions
● Operating temperature: Insertion tube: In air: 0~40ºC tube
AT60S/60S-IV6C6*2 60º/60º Side/Side 6~30mm 9.3 44mm Flexible portion (tube) Flexibility Tapered Flex Tube
● Operating pressure: In air: 1013hPa
Outer diameter ø7.3mm
In water: 1013~1114hPa ■ IV8C6 Optical Adaptor Specifications Working length 2,610mm
● Waterproof properties: Watertight design, waterproof structure (3m depth of water)
Corrosion of heat exchanger end plate Optical system Distal end Channel Inner diameter ø1.7mm
Field of Direction of Depth of field F No Outer Rigid distal Universal cord length 2,000mm
view view diameter end length*1
150 x 46 x 28mm (compact version) including illuminator
Size AT40D-IV8C6 40º 200 ~∞mm 2.5 26.2mm
230 x 46 x 28mm (standard version) including illuminator
AT80D-IV8C6 80º 40 ~∞mm 5.5 29.4mm
Custom Packaging Viewing head
Camera
Sensitivity
Monochrome, 380 x 420 lines resolution
0.2 lux at fl.2
Infrared LED array - 850nm (compact version)
AT120D/NF-IV8C6
AT120D/FF-IV8C6
120º
120º
Forward
5 ~∞mm 14.0
45 ~∞mm 3.0
29.6mm
29.3mm
■ MAJ-456 Rigid Sleeve Specifications
Field of view 120º
Illumination ø8.4mm Optical system Direction of view Side view
- 950nm (standard convert version) AT80S-IV8C6 80º 22 ~∞mm 6.0 36.4mm
Side Depth of field 7~80mm
Power 12V DC, supplied by battery within chest pouch AT120S-IV8C6 120º 3 ~55mm 16.0 35.8mm
Packaging Type Lightweight, telescopic AT120D/120S-IV8C6 120º/120º Forward/Side 5~∞mm/3~∞mm 5/9 28.0mm Insertion tube
Outer diameter ø8mm
AT60D/60D-IV8C6*2 60º/60º Forward/Forward 5~50mm/5~50mm 11/11 24.0mm Working length 338mm
Packaging has always been a very important part of the Olympus Telescopic Pole Length 435 - 1530mm (extended)
Weight 0.5kg (including camera head/ illuminator) *1 When the Adaptor is attached to the scope. Total length 420mm
product range. We have therefore standardised our packaging to suit *2 For 3D measurement.
Type Monochrome - CRT
various customer needs including dedicated customised packaging for Monitor Size 120 x 230 x 60mm with 4" screen
system configurations. Resolution 420 lines Series 6 systems can be conveniently ■ Operating Environment for Series 6 Videoscopes
Olympus can offer a variety of hardcase and softbag solutions. Type 12V 2.5Ah Cyclon, sealed lead acid packaged (see page 18 for details). ● Operating temperature: Insertion tube: In air: -10~80ºC (14~176ºF)*
Minimum: 2 hours continuous use (compact version) All systems require a control unit and In water: 10~30ºC (50~86ºF)**
Battery Run Time
1 hours continuous use (standard version) All portions except insertion tube: In air: 0~40ºC (32~104ºF)
Charge Time 2 hours provides 95% capacity, full charge approx 8 hours
can be used with digital image storage ● Operating pressure: Insertion tube:
Type Constant voltage devices (see page 8). In air: 1013hPa (normal pressure) (IV6C6/8C6)
Battery Charger Input 198 - 264V AC, 50Hz or 100 - 110V AC, 60Hz In water: 1013 (normal pressure)~1360hPa (1~1.35atm) (IV6C6/8C6-13,20,35)
Output 14.4V DC max, 2.2A 1013 (normal pressure)~1773hPa (1~1.75atm) (IV6C6/8C6-50,75)
Chest Pouch Padded nylon with sun shield. Neck and waist straps with quick release buckles All portions except insertion tube: In air: 1013hPa (1atm normal pressure)
Double skinned, toughtened ABS. Waterproof, with O ring seal and pressure ● Liquid resistance: Insertion tube: Withstands machine oil, light oil and 5% salt water
Carrying Case (10~30ºC or 50~86ºF) (normal temperature).
relief valve.
Telescopic pole with camera head/ illumination, control unit, 4" monochrome monitor, * At 50~80ºC atmosphere, use the instrument at a relative humidity of 40% or below. Using the instrument at a higher
Standard Set
1 x battery pack, battery charger, chest pouch, carrying case and instructions. humidity may cause equipment damage.
** Insertion tube of IV7D6 and IV5C6X1 scopes is splashproof, except for the channel of IV7D6, which is not fluid-proof.
Accessories Protective cover for camera head. Wrist strap.

18 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 07
Industrial Videoscopes Accessories

IPLEX SX SERIES
INDUSTRIAL VIDEOSCOPE SYSTEM
IPLEX SX 6.2mm (with channel) 35mm SLR CAMERA
IPLEX SX 4.4mm SC35 (Type 15)
Purpose-built to meet the specific requirements of gas turbine By using an optional OM Adaptor, images observed by an Olympus
inspection, the new IPLEX SX provides improved access to intricate Industrial fiberscope or borescope can be easily photographed with
engine interiors, enhanced hooking and retrieval operation for automatic exposure.
exceptional ease of use, together with all high-quality capabilities Note: Ordinary photography is not possible with this camera.
synonymous with Olympus, such as advanced observation performance
and proven stereo measurement.
● All features of the IPLEX SA unit including stereo measurement plus
working channel in 6.2mm model.
● Control unit can be removed from case for enhanced portability.

World’s slimmest (ø6.2mm) scope with channel

incorporated
With a diameter of only 6.2 mm, this is the world’s slimmest videoscope
to incorporate a working channel. The channel port can be mounted on
the remote control, further enhancing operability, while the hook
assembly features a highly responsive Olympus-original design that
optimizes hook operation for inspection of the second
nozzle guide vane of the F100 engine.
OM ADAPTORS
Interchangeable with ø4.4mm scope DIGITAL CAMERA ADAPTOR For connection of SC35 still camera to Fiberscopes and Rigid
The IPLEX SX range includes a ø4.4mm scope AI-DC3/AK-DC3 Borescopes.
(without a channel) that enables inspection of Now you can take advantage of the superior image quality and high
minute parts. Interchangeability between ø4.4mm resolution of an Olympus CAMEDIA digital camera to document your
scope and the ø6.2mm scope makes for a simple inspection results. Simply connect the camera to your Olympus Industrial 1 2 3 4 5 6
and very cost effective system. fiberscope or borescope via the AI-DC3 or AK-DC3 digital camera adaptor.
Images are available immediately and are ready-made for e-mail, insertion
Rigid Sleeve
into word processor documents, presentations and more.
Useful as an auxiliary insertion tool and ● Endoscopic images can be documented using the high-resolution
also makes the scope easier to handle. CAMEDIA digital camera.
Simply fit and lock the sleeve onto the tip of ● Fiberscope and borescope images can be turned into digital data at
the insertion tube. the touch of a button and downloaded to a PC without having to
make prints.
● An inspection site’s external view can be documented with the Scope OM adaptor Magnification ratio Brightness ratio

■ IPLEX SX Optical Adaptor Specifications camera alone, and the internal view can be documented when the IF3 Series SM-2S 1 1.0 1.0
Optimized for jet engine inspection Optical System Distal End camera is connected to the endoscope. IF7D3X3-26, 32
IF13D3-60, IF8D3X2-23
Scope Optical Adapter
Field Direction Depth F Outer Rigid distal Image Carriers SM-3S 2 1.375 0.529
Olympus’s innovative Tapered Flex
of view of view of field No. diameter end length*
technology is well known for its unequaled AT120D/NF-IV76X1 120º 4~190mm 9.2 20.6mm IF4D4/4S4, IF5D4X1 AI-3M 3 1.0 1.0
insertion capability. The IPLEX SX’s Forward IF6D4, IF8D4, IF11D4
AT120D/FF-IV76X1 120º 25~∞mm 3.3 20.5mm
IV7635X1 ø6.2mm IF4D5/4S5, IF6C5, IF6C5X1
Steel Mesh Resin Braided “Tough Tapered Flex” tube has been AT80S-IV76X1 80º
Side
18~∞mm 4.0 24.6mm IF8C5, IF11C5 AI-4M 4 1.319 0.575
coil interior tube exterior designed to provide optimum flexibility in AT120S-IV76X1 120º 5~∞mm 5.9 24.6mm
AT40D-IV74 40º 200~∞mm 2.4 19.7mm IF6PD4, IF2D4, IF2D5 SM-R 5 1.0 1.0
aircraft engine inspection and excellent Rigid Borescopes
AT80D/NF-IV74 80º 8~∞mm 9.5 20.2mm
resistance to crushing. AT80D/FF-IV74 80º Forward 35~∞mm 3.1 20.1mm
Small Diameter Borescopes
AK-1M 6 1.8 0.31
Modelscope
AT120D/NF-IV74 120º 4~190mm 9.2 20.2mm CAMEDIA digital camera connected to
IV7440X1 ø4.4mm
AT120D/FF-IV74 120º 25~∞mm 3.3 20.1mm Olympus Industrial fiberscope via AI-DC3
Various working tools available AT80S-IV74 80º 25~∞mm 3.7 23.1mm
Versatile tools are available to meet a wide AT120S/NF-IV74 120º Side 1~20mm 9.6 23.1mm C-MOUNT ADAPTORS
range of inspection requirements such as AT120S/FF-IV74 120º 6~∞mm 6.0 23.1mm For connection of TV cameras to Fiberscopes and Rigid Borescopes.
*The rigid portion at the scope’s distal end when the adapter is mounted
retrieval of foreign objects and dropped
objects. Snare basket, 3-prong grasper,
1 2 3 4 5 6 7 8 9 10 11 12
magnet and alligator forceps are available. ■ Stereo Measurement Optical Adaptor Set Specifications
Optical System Distal End
Scope Set Name Optical Adapter Field Direction Depth F Outer Rigid distal
of view of view of field No. diameter end length*
Belt holder for hands-free operation CAMEDIA digital camera connected to
MAJ~1241D AT60D/60D-IV76X1 60º Forward 5~∞mm 26.7mm
IV7635X1 7.5 ø6.2mm Olympus Industrial borescope via AK-DC3
The remote control with channel port MAJ~1241S AT60S/60S-IV76X1 60º Side 4~∞mm 32.4mm
mounted can be attached to a belt around MAJ~1244D AT60D/60D-IV74 60º Forward 5~∞mm 26.3mm
IV7440X1 7.5 ø4.4mm ■ Specifications
MAJ~1244S AT50S/50S-IV74 50º Side 4~∞mm 30.7mm
your waist. This allows you to operate the AI-DC3 AK-DC3 Scope C-Mount adaptor Magnification ratio Brightness ratio
scope without having to hold the remote IF4D5/4S5 Series 5 industrial rigid borescopes
IF3 Series MC-04 0.8 1.6
control, and leaves your hands totally free K12/17/27 (mini borescopes)
■ IPLEX SX Operating Environment IF5D4X1 IF7D3X3-26, 32 MC-05 1 1.0 1.0
X009/X012/X017/X025 (small diameter borescopes) IF13D3-60, IF8D3X2-23 MC-08 1.6 0.39
for other tasks when you’re not operating ● Operating temperature: Insertion tube: In air: -25~80ºC* Compatible scope
IF6C5X1 IF6PD4
2
Image Carriers MC-10 3 2.0 0.25
the remote control. Under water: 10~30ºC (IV7440X1 only)
IF8C5 IF2D5 AI-10C 0.8 1.56
Other parts than above: In air: 0~40ºC IF4D4/4S4, IF5D4X1 4
IF11C5 IF8D4X2/X3
● Operating atmospheric pressure: Insertion tube: In air: 1013hPa (1atm) IF6D4, IF8D4, IF11D4 AI-11C 5 1.0 1.0
In water: 1013~1418hPa (1~1.96atm) (IV7440X1 only) Connection with camera Screwed into tripod socket of camera*
Portable package design Other parts than above: In air:1013hPa (1atm) C-2000ZOOM/C-2020ZOOM/C-3030ZOOM/C-3100ZOOM/
IF4D5/4S5, IF6C5, IF6C5X1
IF8C5, IF11C5
AI-12C 6 1.51 0.44
Compatible camera AI-3C 7 2.0 0.25
● Liquid resistance: Insertion tube, channel port, remote control: C-4040ZOOM/C-4100ZOOM/C-3020ZOOM/C-4000ZOOM/C-5050ZOOM
An integrated all-in-one design offers Two components: stay-provided mount for scope eyepiece and AK2-3C 0.45 –
Machine oil, light oil and 5% saline is attached. Construction
superior portability and faster, more ● Other parts than above: The SX case outer finish is resistant to machine oil, light oil and 5% intermediate ring for camera filter thread. AK2-4C 0.6 –
IF6PD4, IF2D4, IF2D5 AK2-5C 0.75 1.8
efficient set-up and takedown. Removing saline is attached. Note: When the adaptor is connected to the fiberscope, interference between the fiberoptic matrix and Rigid Borescopes
8

● the LCD pixels may cause striped patterns (moiré). AK2-10C 9 1.0 1.0
the control unit from the case allows you to Waterproof: Insertion tube: Can be used under water (IV7440X1 only). Small Diameter Borescopes
Drip-proof: Remote control, LCD monitor, channel port: To prevent moiré, set the camera’s focus to manual mode. AK2-20C 10 1.35 0.55
carry the IPLEX SX on your shoulder, Modelscope
Can be used in rain but cannot be used under water. * When the adaptor is connected to the camera, the camera’s tripod socket cannot be used. MC-R44 11 1.85 0.3
enhancing mobility in confined spaces and Other parts than above: Neither waterproof nor drip-proof.
To secure the camera on a tripod, use the optional fiberscope holder (MB-936/MB-937) or borescope
MC-R58 12 2.4 0.17
tripod mount (KN-29).
elevated locations. * Angulation may be affected by extreme temperatures.

06 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 19
Accessories Industrial Videoscopes
Viewing Adaptors Engine Turning Tools 3D EYE-TREK STEREO MEASUREMENT (IPLEX SA STEREO MEASUREMENT)

These adaptors allow the eyepiece of a rigid borescope or flexible The Olympus Electronic Engine Turning Tool (OTT) can offer increased Olympus’s stereo measurement technology uses triangulation to
When the 3D Eye-Trek face-
fiberscope to be extended or angled for a more comfortable viewing speed and efficiency for all internal turbine inspections. Using a simple measure image information captured by two parallax lenses. With six
mounted display is connected to
position. hand held controller each blade can be precisely positioned for an different measurement modes available, high-precision measurement
the remote control, surface
optimal view, allowing single operator inspections. The Engine Turning capabilities are available from any angle.
contours that would normally be
Tool is designed to be attached to engines quickly and easily - the Distance:
difficult to detect can be observed Measures the total length of a defect or
engine-specific adaptor connect the drive motor directly to the engines’
in three dimensions where they zone of damage.
gearbox turning point or air starter position. Once connected the
can easily be interpreted. Point-to-Line:
operator can select rotation speed and direction (forward or reverse). Measure the distance between a
The Olympus Turning Tool is suitable for use on most turbine engines for hypothetical line between two designated
aerospace and power generation applications. positions and the required point.
Depth:
The Olympus Turning Tool uses an electric stepper motor rather than Measures the depth/height of corrosion,
compressed air, making its operation precise, quiet and efficient. The protrusion and indentation from a
range consists of four different models, depending on the specific engine hypothetical plane to the required point.
Lines:
requirements. Features include blade identification on an easy to read
Total length of a crack with complicated
LED, convenient foot switch, offering hands-free operation and many Left Right
contours can be measured by plotting
other specific features, outlined below. multiple positions.
3D Image Area:
● OTT-1 Calculates the area of a burn or zone of damage
■ IPLEX Equipment Components and Functions surrounded by multiple designated positions.
This turning tool package is a high specification unit. A complete kit
Profile:
includes a Central Processing Unit, Hand Controller, Foot Pedal, IPLEX SA IPLEX SA IPLEX IPLEX SX
■ Viewing Adaptors Specifications STEREO MEASUREMENT Hard-to-see irregularities are simulated with
Software Module, Engine Adaptor and all required cables. Features of Scope Variation computer graphics for easier analysis.
Adaptor Name Angle Arm Length / Magnification
this turning tool include video overlay, variable torque settings, Outer diameter Insertion tube length Product code
AK2-18-90 90° angle 18cm arm interchangeable engine adaptor, backlash compensation, blade counting ø4.4mm
3.5m IV7435A IV7435A IV7435 –
PC SOLUTION (IPLEX SA and SX PC COMPATIBILITY)
4.0m – – – IV7440X1
AK2-9-60 60° angle 9cm arm and tagging, auto indexing and adjustable rotation speed, direction and All aspects of inspection operation can be controlled with a PC
3.5m IV7635A IV7635A IV7635 IV7635X1
AK2-8-90 90° angle 8cm arm
dwell time. 5.0m IV7650A IV7650A IV7650 – connected to IPLEX via a USB cable. Stored image data can also be
ø6.0mm

AK2-79-90 90° angle 79cm arm ● OTT-2

(IPLEX SX 6.2mm) 7.5m IV7675A IV7675A IV7675 – transferred to a PC for more extensive processing and analysis.
9.6m IV7696A IV7696A IV7696 – Remote operation:
AK2-80-00 Direct Viewing 80cm arm This turning tool is specifically designed for the F100 engine. Features Basic Functions All IPLEX functions including angulation,
Interchangeable optical adaptor ✔ ✔ ✔ ✔
AK2-ZOOM Direct Viewing 1.5 to 3x magnification of this unit are the same as those of the OTT-1, but without the video image recording and data management can
4-way motorised angulation ✔ ✔ ✔ ✔ be operated from a connected PC.
AK-U Universal angle 7cm arm
overlay function. Tough Tapered Flex insertion tube ✔ ✔ ✔ ✔ Stereo measurement:
Scope length index line ✔ ✔ ✔ ✔
AK-VARI 90° angle 1.2/2.4x magnification (mirror image) ● OTT-3 ✔ ✔ ✔ ✔
You can concentrate on capturing images at
LCD monitor the inspection site. The image data can be
LS-10 Flexible twin viewing adaptor The OTT-3 is the most portable turning tool in the Olympus range. The LCD fixing device (monopod) ✔ ✔ ✔ ✔ downloaded to your PC for stereo
Remote controller ✔ ✔ ✔ ✔ measurement.
unit is simple yet effective, employing the same engine adaptor as in the
50-W metal-halide light source ✔ ✔ ✔ ✔ Database management:
POWER SUPPLY UNIT OTT-1 system. The use of these engine adaptor results in a turning tool Integrated shock-resistant case ✔ ✔ ✔ ✔ IPLEX MANAGER, an image management
with flexibility for use with a variety of engine configurations and
MAJ-522/PSU-PLUS inspection requirements. The base equipment can be expanded by the
Rod handle & casters
Vertical and horizontal operation
✔
✔
✔
✔
✔
✔
✔
✔
program provided with the IPLEX SA and
SX Series, allows you to quickly build an
The MAJ-522 power supply offers 110/230V auto switching AC input and addition of further engine adaptor, to make the equipment suitable for Insertion tube winding drum ✔ ✔ ✔ ✔ inspection database.
has on the rear of the unit x 2 XLR connectors and x 2 Hirose use on various engines at little extra cost. AC power supply ✔ ✔ ✔ ✔ Create and edit reports:
connectors for connection and operation of up to x 4 Olympus products. DC power supply ✔ ✔ ✔ ✔ IPLEX MANAGER includes a template
● OTT-4 Working channel – – –
ø1.7mm creation function so you can easily create
The MAJ-522 can be connected to a variety of Olympus products (IV7635X1 ONLY) your own report formats.
including the ILH-2, IV-6, IV6A, DSM-2 and IW-R1 can be mounted into The OTT-4 turning tool is a lightweight unit, targeted at specific engines, CCU Functions Send inspection data by e-mail:
the System Case 2 for maximum system portability. designed to achieve simple but efficient engine turning capabilities. Freeze ✔ ✔ ✔ ✔ IPLEX MANAGER’s e-mail function lets you
Note, however, that there is no compatibility with other turning tools in Seamless digital zoom ✔ ✔ ✔ ✔ send image data and measurement data by
The PSU-PLUS is a multi-input power supply with the same inputs Panning ✔ ✔ ✔ ✔ e-mail. This makes it much easier to share
the Olympus Range.
Exposure ✔ ✔ ✔ ✔ data for comprehensive checking and
and connections as the MAJ-522 but with the added advantage of
Brightness adjustment ✔ ✔ ✔ ✔ analysis.
both AC and DC input voltage. With a 12V input on the front of the
Gain ✔ ✔ ✔ ✔
PSU-PLUS, battery products can be connected to the PSU-PLUS and Enhancement ✔ ✔ ✔ ✔
■ IPLEX Optical Adaptor Specifications
offer stand-alone operation of the System Case 2. Comparison ✔ ✔ – ✔ Optical System Distal End
Scope Optical Adaptor Field of Direction of Outer Rigid distal
Menu language selection ✔ ✔ ✔ ✔ Depth of field F No.
view view diameter end length*
■ SPECIFICATIONS Video signal output ✔ ✔ ✔ ✔
AT40D-IV74 40º 200 ~∞mm 2.4 19.7mm
Video signal input ✔ ✔ – ✔
AT80D/NF-IV74 80º 8 ~∞mm 9.5 20.2mm
● MAJ-522 Audio signal output ✔ ✔ ✔ ✔
AT80D/FF-IV74 80º Forward 35 ~∞mm 3.1 20.1mm
Input Voltage: 100 to 240V AC Recording Management Functions
AT120D/NF-IV74 120º 4 ~190mm 9.2 20.2mm
Still image recording/playback ✔ ✔ – ✔ IV74 ø4.4mm
Input Frequency: 50/60Hz AT412D/FF-IV74 120º 25 ~∞mm 3.3 20.1mm
Audio recording/playback ✔ ✔ – ✔
Rated output: 12V DC 13.3A (DC Output Terminal 1,2; Max 3A) AT80S-IV74 80º 25 ~∞mm 3.7 23.1mm
Movie recording/playback ✔ ✔ – ✔ Slide
12V DC 13.3A (DC Output Terminal 3,4; Max 10A) AT120S/NF-IV74 120º 1 ~20mm 9.6 23.1mm
Removable medium ✔ ✔ – ✔
AT120S/FF-IV74 120º 6 ~∞mm 6.0 23.1mm
Power Consumption: Max 220W Thumbnail display ✔ ✔ – ✔
AT40D-IV76 40º 200 ~∞mm 2.4 19.3mm
Dimensions: 174(W) x 55(H) x 230(D) mm Image file operation ✔ ✔ – ✔ AT80D/NF-IV76 80º 8 ~∞mm 9.5 19.8mm
Weight: 2.6kg (5.8lb) Search fuction ✔ ✔ – ✔ AT80D/FF-IV76 80º Forward 35 ~∞mm 3.1 19.7mm
Image title entry ✔ ✔ – ✔ AT120D/NF-IV76 120º 4 ~190mm 9.2 19.8mm
USB terminal ✔ ✔ – ✔ ø6.0mm
● PSU-PLUS ✔ ✔ ✔ IV76
AT412D/FF-IV76 120º 25 ~∞mm 3.3 19.7mm
IPLEX MANAGER software – AT80S-IV76 80º 18~∞mm 4.0 25.2mm
Input Voltage: 85-32 / 170-265V AC (auto voltage select) Direct recording to PC ✔ ✔ – ✔ Slide
AT120S/NF-IV76 120º 1-25 ~∞mm 9.6 25.2mm
Input Frequency: 50/60Hz Recorded data transferring to PC ✔ ✔ – ✔ AT120S/FF-IV76 120º 5 ~∞mm 5.9 25.2mm
Rated output: 12V DC 13.3A (DC Output Terminal 1,2; Max 3A) Remote operation by PC ✔ ✔ – ✔ AT100D/100S-IV76 100º/100º Forward/Slide 2~150mm 7.0 27.2mm
12V DC 13.3A (DC Output Terminal 3,4; Max 10A) International Measurement Functions AT220D-IV76 220º Forward 3~100 mm 4.3 ø8.4mm 21.1mm
Pratt & Whitney General Electric SNECMA CFMI Rolls-Royce
Aero Engines Scalar measurement ✔ ✔ – ✔
Power Consumption: Max 220W JT8D CF34-8CI V2500 M88 CFM56-3 TAY/SPEY
* The rigid portion at the scope’s distal end when the adaptor is mounted
Stereo measurement (Distance) ✔ – – ✔
Dimensions: 174(W) x 55(H) x 230(D) mm JT8D Starter CFE738 OTT-2 V2500 CFM56-5 RB211-535 ✔ ✔ ■ IPLEX Operating Environment
Stereo measurement (Point-to-Line) – –
Weight: 2.3kg JT9D CF6-50 CFM56-7 RB211-524 Stereo measurement (Depth) ✔ – – ✔ ● IPLEX can be upgraded to IPLEX SA after purchase.
PW2000 CF6-80A TRENT500/600/700 ✔ ✔ ● IPLEX SA can be used for stereo measurement by purchasing a stereo measurement
Stereo measurement (Area/Lines) – –
PW4000 CF6-80C2 NON FADEC BR710 ✔ ✔ optical adaptor.
Stereo measurement (Profile) – –
F100 CF6-80C2 FADEC BR715 ● Operating temperature: Insertion tube:
Other Functions
OTT- F100 CF6-80C2 IDG RB199 ● Operating temperature: Insertion tube: In air: -25~80ºC* Under water: 10~30ºC
3D observation Option Option Option Option
F100 LP GE90 F402 Other parts than above: In air: 0~40ºC
TF30 F101 INDUSTRIAL TRENT ● Operating atmospheric pressure: Insertion tube: In air: 1013hPa (1atm)
F118 F108 RB211-24G DLE ■ Stereo Measurement Optical Adaptor Set Specifications In water: 1013~1985hPa (1~1.96atm) (IV7635,7670,7675 & 7696)
F110-100 501K Under water: 1013~1368hPa (1~1.35atm) (IV7435)
Optical System Distal End
OTT2 F110-100 Scope Set Name Optical Adaptor Other parts than above: In air: 1013hPa (1atm)
Field of Direction Outer Rigid distal
F404 view of view
Depth of field F No.
diameter end length* ● Liquid resistance: Insertion tube, remote control: Machine oil, light oil and 5% saline.
● Other parts than above: Machine oil, light oil and 5% saline.
TF39 MAJ-1044D AT60D/60D-IV74 60º Forward 5 ~∞mm 25.9mm
IV74 7.5 ø4.4mm ● Waterproof: Insertion tube: Can be used under water.
LM2500 MAJ-1044S AT50S/50S-IV74 50º Slide 4~∞mm 31.9mm
Drip-proof: Remote control, LCD monitor: Can be used in rain but cannot be used under water.
LM5000 MAJ-1046D AT60D/60D-IV76 60º Forward 5 ~∞mm 26.3mm
IV76 7.5 ø6.0mm Other parts than above: Neither waterproof nor drip-proof.
LM600 MAJ-1046S AT60S/60S-IV76 60º Slide 4~∞mm 30.7mm * Angulation to a large angle may become difficult under low temperatures.

20 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 05
Industrial Videoscopes Accessories
3D EYE-TREK (for IPLEX) CCTV EQUIPMENT
FMD-3DN (NTSC) Various CCD cameras, CRT and LCD monitors and video recording
equipment products are available for TV observation.
FMD-3DP (PAL) For details of the latest models, contact your local Olympus sales
Allows you to confirm the conditions of an inspection site with super- representative.
real three-dimensional images. 3D Eye-Trek makes it easier to get an
accurate sense of distance, also facilitating insertion of the scope and
IPLEX SERIES access to the site.

INDUSTRIAL VIDEOSCOPE SYSTEM

IPLEX SA (STEREO MEASUREMENT)
IPLEX SA
IPLEX
A videoscope system that integrates everything you need for industrial
endoscopic inspections.
● All-in-one design for easy transport and set up
● Compact, lightweight remote control for single-hand operation
● Four-way joystick-controlled angulation via remote control
● Stepless electronic zoom and versatile brightness adjustment
functions REMOTE CONTROL EXTENSION CABLE (for IPLEX)
● Still image recording, still image and voice annotation recording, and
LIGHT GUIDE CABLE
moving image recording
MAJ-1091 Length: 4m This accessory transmits light from a separate light source to a rigid
● Six stereo measurement modes Extends the remote control cable, allowing more freedom of movement borescope, but is not required for a flexible videscope or fiberscope.
● Scope operation, image recording and management, and during operation. Attaching this cable and removing the monitor from Different types and lengths are available for specific applications.
measurement can all be done using a PC. You can also create and the monopod allows you to operate the main IPLEX unit while moving
edit reports, e-mail images and more freely around a wider area.
● Ultra-real three-dimensional observation with 3D Eye-Trek Note: The remote control shown in the photograph is supplied as a standard part of the
IPLEX system, and is also available as a spare part.
BASIC PERFORMANCE
EASY OPERATION
All-in-One Design
All the components and functions you need for Single-Hand Operation
industrial inspection are built into IPLEX’s IPLEX’s compact, lightweight remote control allows you to operate all
sophisticated all-in-one design. A retractable inspection related functions with one hand, including insertion tube
handle and integral wheels make transportation manipulation, observation, image recording, image management and
simple, while the streamlined design is measurement.
optimised for easy manoeuvring through tight
spaces. High-precision motorised angulation
Angulation of the insertion tube tip can be
controlled with the joystick on the remote
control. In addition to normal movement, a
fine movement mode is provided that allows
exact positioning of the insertion tube tip.

RIGID SLEEVE (for IPLEX)

MULTI-PURPOSE SLEEVE
Useful to provide a constant insertion depth of rigid borescopes.
Set-up is easy
MAJ-1281 (for ø4mm dia. insertion tube)
All you have to do is: MAJ-1253 (for ø6mm and ø6.2mm dia. insertion tube)
1. Open the lid
2. Adjust the monitor position
Useful as an auxiliary insertion tool and also makes the scope easier to
3. Connect a power supply handle. Simply fit and lock the sleeve over the scope insertion tube.
4. Take out the remote control and turn it on
5. Pull out the insertion tube from the
integral drum
When the inspection is complete, just wind
Stepless electronic zoom
up the insertion tube with the winding The stepless zoom enables smooth,
handle. It’s quick and easy. continuous magnification adjustment from
1X to 3X at the touch of a button on the
Rugged design remote control.
From its material and construction, to its
sophisticated shock-absorbing mechanism, Optical brightness adjustment
everything about the IPLEX case has been Various brightness adjustment functions
designed to provide maximum protection such as gain control, automatic brightness
against external impact. The components control and extended exposure are available
themselves are also more toughly built. The to suit different inspection environments. All
TTF (Tough Tapered Flex) tube, for of these functions can be operated from the FIBERSCOPE AND VIDEOSCOPE HOLDER
instance, features an extremely durable remote control. This accessory enables mounting of a fiberscope’s and Series 6
interior construction that’s about three times
more crush resistant than conventional
RETRIEVAL TOOLS videoscope’s control section onto commercially available tripods or
tubes, without comprimising flexibility. Image recording (IPLEX SA) Various types of retrieval tools are available which can be used either other similar devices.
During observation, you can use the internally, with 6.2mm or 7.3mm diameter videoscopes and For IV6C6, IV8C6, IV7D6, IV6C5-110/160, IV6C5XI, IF8C5: MB-937
Detachable monitor remote control to access the menu screen fiberscopes, or externally, using a fixing kit, with instruments of 6mm
and record instantly. Still images, with For Fiberscopes other than the above: MB-936
The high-resolution LCD monitor can be
voice annotation and moving images can
diameter and above. A separate holder is available for Series 5 borescopes (KN-29).
detached from the monopod and connected For details, consult your local Olympus sales representative.
to the remote control with an optional be recorded on the large-capacity
extension cable. This makes it possible to memory card.
continue an inspection without having to
move the main unit.
Data management (IPLEX SA)
Data management functions such as
thumbnail display, folder search and
erasing, moving and copying images can be
operated using the remote control.

Narrow insertion tubes

A variety of insertion tubes are available to suit different
observation purposes. The IPLEX Series includes the
narrow 4.4mm diameter insertion tube.

04 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 21
System Charts Industrial Videoscopes

Industrial Videoscopes - Providing comprehensive and remote

VIDEOSCOPES
visual inspection ability, with the highest quality colour images,
IPLEX Series accurate internal measurement, and PC interaction
3D Eye-Trek Olympus Videoscopes provide bright, clear, full screen
images, and offer the most versatile of inspection tools.
Industrial Videoscope System
IPLEX SA (STEREO MEASUREMENT) STRUCTURAL DRAWING
IPLEX SA Optical Adaptors Remote Control
IPLEX Extension Cable
lnsertion section LCD monitor

Rigid Sleeve CCD

MAJ-1104 Video Monitor Signal bus
Distal end
MAJ-1105 Bright, High-Quality Images
Field of view

Flexible portion
VCR Light guide fiber Light source
Depth of field Bending section Electronic control unit

Objective lens
and optical tip adaptor
Remote control

USB or
Recording Card
Ultra-compact CCD for image transmission.
PC 4 way Tip Angulation Optical Tip Adaptors
High-resolution images are displayed on a TV monitor.
The videoscope captures light reflected from a subject through an
objective lens and directs it to the surface on the CCD. The CCD then
IPLEX SX converts the light into electrical signals and transfers this data to the
3D Eye-Trek
videoscope control unit. The unit then sends a video output to the monitor.

MAIN APPLICATIONS
Optical Adaptors Remote Control Ideal when higher resolution, longer insertion and
Extension Cable brighter images than those obtainable with fiberscopes Forward/Side-Viewing Adaptor Ultra-Wide-Angle Adaptor

are required. TV monitor observation only.

Rigid Sleeve
MAJ-1104 For inspecting:
Video Monitor
MAJ-1105 ● Inside engines of vehicles, aircraft etc.
● Inside piping, such as heat exchangers, steel pipes and drainage
pipes.
Steel coil Mesh interior Resin tube Braided exterior
● Inside long pipes, such as plant piping and condensers.
VCR
● For wide cavities, such as interiors of tanks, structures and large “Tough Tapered Flex” Tube:
Featuring a more flexible distal end and stiffer proximal end, this
diameter pipes. Olympus-developed tube design provides the superior insertion
● Inside precision machinery, such as fax machines and copiers. capability you need to perform inspections more easily.

USB or MAIN FEATURES

Recording Card PC
Bright, high-resolution images
The bright, high-resolution images captured by the high-performance
CCD are larger, clearer and easier to view with full-screen colour
display.
Working Channel Tools
Interchangeable optical adaptors
You can easily change optical adaptors to suit the observation
requirements such as direction of view, angle of view and depth of field.
System Case for Series 6 Videoscope Simultaneous direct and side-viewing and super-wide-angle adaptors
are also available. Image Recording & Report Generation

Industrial Videoscope TTF tube with superb insertability and durability

IV6C6 TV Camera
The superior insertability of the Olympus-designed TF (Tapered Flex)
IV8C6 OTC-6
tube allows you to easily negotiate bends. Incorporated in the IPLEX
IV7D6
Optical inserting tube, the new TTF (Tough Tapered Flex) tube design features
IV5C6 CCU
Adaptor a braided tungsten exterior and is three times more durable than
IV-6A Video Monitor conventional tubes.
IV-6
IV System Case-2 Observation functions including zoom and brightness adjustment
In addition to zoom observation and various image adjustment functions
Light Source VCR such as brightness and sharpness adjustment, the IPLEX system offers
Rigid Sleeve
ILH-2
MAJ-456* a convenient comparison function that displays live and recorded Stereo Measurement
images simultaneously.
IV6C5 Optical Power Supply Unit Digital image recording with voice annotation
Video Printer
Adaptor MAJ-522
PSU-PLUS Digital still and movie image recording provides flexible and powerful
image management. Voice annotation recording is also possible.
Conversion
Adaptor LCD Monitor Stereo measurement capability
MAJ-565** Up to six different stereo measurement modes are available to facilitate
* For use with IV7D6 only
** Required for use IV6C5 with IV-6A
high-precision measurement, including distance, height and depth.
Digital Storage and 4 way tip angulation “3D Eye-Trek” Face-Mounted Display
Measurement System PCMCIA
Memory Card The tip of the videoscope can be moved in four directions, controlled by Lightweight, comfortable and portable the 3D Eye-Trek
DSM-2 PC displays observation images literally right in front of
the user, allowing the negotiation of difficult access routes and scanning your eyes. When combined with the IPLEX Series, it
during the inspection. delivers ultra-real three-dimensional images.

22 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 03
 System Charts
Olympus Industrial Endoscopes
meet needs across a wide range of areas, FIBERSCOPES AND RIGID BORESCOPES
from maintenance to R & D
Eyeball Observation System Digital Photography System
Olympus technology has made it possible to obtain views from internal or difficult to reach areas, easily and quickly,
Olympus
without teardown or disassembly, and without destroying exterior features. Digital Camera Adaptor CAMEDIA
AI-DC3/AK-DC3
Olympus has a comprehensive range of industrial endoscopes, such as videoscopes, fiberscopes and borescopes, with a Digital Camera
range of ancillary equipment to match your specific requirements. These scopes, all designed and made by Olympus, offer Industrial Fiberscope Optical
Adaptor
superior imaging and performance achieved through combining Olympus expertise in optics, electronics and precision
mechanics gained through years of experience. With the ease of use and durability of Olympus products, it is clear that Video System
Olympus Industrial endoscopes can make a large contribution to productivity, safety and reliability in your industry. LCD Monitor
Light Source
Rigid Borescope

C-Mount
Adaptor Video Monitor
SOME APPLICATION EXAMPLES Light Guide Cable

TV Camera VCR
Aerospace Industries Small Diameter Borescope
For examination of Airframe and Gas turbines in research,
production and maintenance for military and civil aircraft. Also Video Printer
rockets and rocket engines.
OM Adaptor
Security
For detection of Narcotics and other contraband items, for bomb
Image Recorder PCMCIA PC
and weapons searches, and for locating those trapped following IW-R1 Memory Card
disasters.
Power Generation
For maintenance of heat exchange pipes, condensers, piping and Film Photography Digital Storage and
Measurement System
Floppy Disk
Flash Path PC
turbines at nuclear, fossil fuel and hydroelectric power generation System DSM-2
facilities.
Industrial Machinery
For quality control and maintenance of motors, boilers, heat
exchangers and machine tools.
Refineries/Chemical Plants
For routine and urgent inspection of process piping, pressurised
storage reservoirs, heat exchangers, boilers etc.
Automotive
For quality control examinations of engines, hydraulic components
and injection nozzles, as well as detection of leaks, squeaks and
rattles in assembled vehicles.
Electrical Equipment/Electronics Industries
For monitoring operation of equipment and factory automation
through automatic inspection and positioning, as well as a wealth
of R & D applications.
Gas Pumping & Delivery Systems
For monitoring corrosion inside and outside gas pipes, the
presence of water infiltration and flaws in outlets, and for
maintenance of gas turbines used for pumping.
Steel Industries
For equipment maintenance as well as quality control of pipes and
tubes.
Architecture/Construction
For examination of walls, ducts, structured joints, as well as for
viewing inside architectural models.
Education/Research
For monitoring animals and insects, root systems of plants etc.
Also for historical and archaeological applications such as internal
inspection of statues and tombs.
Railroad/Shipping
For routine inspection of motors, turbines, diesel engines, piping etc.
Water Supply/Drainage
For locating rust and blockages inside pipe systems.
Useful for documentation before and after lining is coated.

02 OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE OLYMPUS INDUSTRIAL ENDOSCOPY SYSTEM GUIDE 23