Scribd
Upload
162 views2 pages

PGDD KPE 1403 09 EEL MT 002 MTO For Electrical Bulk Material Duri6

This document provides a materials take-off (MTO) for electrical bulk materials for a project. It lists various lighting fixtures, switches, receptacles, junction boxes, and conduit outlets along with their descriptions and quantities needed. The total quantities account for a 10% contingency amount. Notes specify that lighting fixtures must come from an approved vendor list and include bulbs, and that ballasts must be electronic type.

Uploaded by

wibowo wibowo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views2 pages

PGDD KPE 1403 09 EEL MT 002 MTO For Electrical Bulk Material Duri6

This document provides a materials take-off (MTO) for electrical bulk materials for a project. It lists various lighting fixtures, switches, receptacles, junction boxes, and conduit outlets along with their descriptions and quantities needed. The total quantities account for a 10% contingency amount. Notes specify that lighting fixtures must come from an approved vendor list and include bulbs, and that ballasts must be electronic type.

Uploaded by

wibowo wibowo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Date: 22-Feb-18 MTO FOR ELECTRICAL BULK MATERIAL

Rev: 0 DOC. NO. : PGDD-KPE-1403-09-EEL-MT-002 Page: 6 of 9

ITEM DESCRIPTION QTY CONTIGENCY TOTAL QTY UNITS REMARK

B LIGHTING FIXTURE
B.1 TYPE Ceiling mounting Lighting
Normal Indoor LED Light Recessed Mounted, 2x36W 230V AC, 50Hz, 6700
lm, IP 20 min, comply with IEC 598, C/W M2 alumunium optic reflector, 40 10 50 EA
fixture dimension (1200 x 300 max) and Mounting Accessories on ceiling
Emergency Indoor LED tube Light Recessed Mounted,2x36W 230V AC,
50Hz, 6700 lm, IP 20 min, comply with IEC 598, C/W M2 alumunium optic
reflector, Lamps (840 code), fixture dimension (1200 x 300 max) and 14 4 18 EA
Mounting Accessories, Integrated charger & Battery Set duration 90
minutes.
Exproof Outdoor LED Light Pendant Mounted, 2x36W 230V AC, 50Hz,
6700 lm, IP 65 min, comply with IEC 598, C/W M2 alumunium optic
2 1 3 EA
reflector, fixture dimension (1200 x 300 max) and Mounting at shelter
sctructure
Exproof Outdoor LED Light Pendant Mounted, 1x18W 230V AC, 50Hz,
3000 lm, IP 65 min, comply with IEC 598 andd Mounting at Ceiling 2 1 3 EA
sctructure

B.2 TYPE Wall mounting Lighting


Emergency Exit Light Sign Pendant Mounted, 10W, 230V AC, 50Hz, IP20
min, Tubular Compact Fluorescent Lamp 10W, Aluminum housing and test
8 2 10 EA
light button, Integrated charger & Battery Set (NiCad) duration 90
minutes,with LED display & monitoring via microprocessor

B.3 TYPE Pole mounting Lighting


LED Flood Light Pole Mounted, Ex proof, LED Flood Light 100W, 230V AC,
50Hz, IP65 min, Non-corrosive material, Aluminum housing, glass bowl
4 1 5 EA
cover, silicone rubber gasket, C/W 100W lamp, furnished terminal block,
pole mounting accessories
LED Flood Light Pole Mounted, LED Flood Light 100W, 230V AC, 50Hz,
IP65 min, Non-corrosive material, Aluminum housing, glass bowl cover,
2 1 3 EA
silicone rubber gasket, C/W 100W lamp, furnished terminal block, pole
mounting accessories

B.4 SOCKET OUTLET / RECEPTACLE


Duplex Socket Outlet, Flush Mounted, Comprise of 2 sockets, 16 A, 230V
AC, 50 Hz, 2P + E with terminal contact protection (for child protection),
B.4.1 min. IP20, German standard (Type F), c/w inbow metal support, metal flush 50 13 63 EA
mounting back box for 2 sockets suitable for 1" conduit, fitting entry,
terminal block for cable 2C+E - 2.5 mm2, and Mounting Accessories
3 Phase Welding Receptacles and Plug
Exproof Welding Socket Outlet, 3 Phase, 60A, 400V AC, 50Hz, 5 Poles
B.4.2 (3Ph+N+E), flame proof Ex"d", IP 65 or NEMA 4, Copper Free Aluminum 1 0 1 EA
(CFA) enclosure, Certified for Class I Zone 1, Gas Group IIA, Temperature
Class T3 or Class I Div. 1, Group C & D c/w interlock switch, M50 metric
thread cable entry, and socket plug
B.5 SWITCH
One Gang One Way Switch, Flush Mounted, 10A, 230V AC, 50 Hz, IP20
min, C/W inbow metal support, metal flush mounting back box suitable for
20 5 25 EA
1" conduit fitting entry, terminal block for cable 2C - 2.5 mm2, and
Mounting Accessories;

B.6 JUNCTION BOX


B.6.1 Outdoor Junction Box
Junction box with cover, IP 65 min, Stainless Steel material, c/w 6 x 10
mm2 terminal block (4 ea grey color, 2 ea green-yellow color) suitable for 2 1 3 EA
230V AC, 50 Hz, min. 16A, 3 no bridge link, 1 x M25 and 3xM20 metric
thread cable entries
Junction box with cover, Ex proof, IP 65 min, Stainless Steel material, c/w 6
x 10 mm2 terminal block (4 ea grey color, 2 ea green-yellow color) suitable 4 1 5 EA
for 230V AC, 50 Hz, min. 16A, 3 no bridge link, 1 x M25 and 3xM20 metric
thread cable entries
B.6.1 Indoor Junction Box
Junction box with cover, IP 20 min, PVC material, c/w 6 x 10 mm2 terminal
block (4 ea grey color, 2 ea green-yellow color) suitable for 230V AC, 50 Hz, 20 5 25 EA
min. 16A, 3 no bridge link, 1 x M25 and 3xM20 metric thread cable entries

B.7 CONDULET OUTLET (for lighting cable connection inside)


Conduit outlet with cover, IP 42 min (or suitable for indoor), polystyrene
material, c/w 4 nos (min) knock-out hole,cover, flame retardant and follow 40 10 50 MTR
design as per IEC or NEC or UL. (this knok-out hole to be diameter 20 mm
min)

Note :
1. Brand or Maker of lighting fixture , switch and receptacle must be mentioned inside Approved Vendor List
2. All lighting fixtures to be supplied with lighting bulb.
3. Bidder to submit all catalog & lighting datasheet for review during bid.
4. All ballast shall be electronic type with input range 220-230 V AC, however if not possible then all lighting fixture input shall be designed for nominal input of
230 V AC

You might also like