Scribd
Upload
9K views

Ceiling Works Inspection Checklist

This document is a ceiling work inspection checklist used to ensure quality standards are met. It lists 3 key items to check: 1) materials match approved samples, 2) false ceilings are installed correctly based on specifications for type, pattern, height and fixing of services, and 3) skim coats are applied evenly without gaps, leaks, stains or cracks. Inspectors mark each item as acceptable or not, and note any non-conformances, corrections, or need for re-inspection. Representatives from the consultant and client must sign off to verify the inspection.

Uploaded by

Siti Rohani Isdris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9K views

Ceiling Works Inspection Checklist

This document is a ceiling work inspection checklist used to ensure quality standards are met. It lists 3 key items to check: 1) materials match approved samples, 2) false ceilings are installed correctly based on specifications for type, pattern, height and fixing of services, and 3) skim coats are applied evenly without gaps, leaks, stains or cracks. Inspectors mark each item as acceptable or not, and note any non-conformances, corrections, or need for re-inspection. Representatives from the consultant and client must sign off to verify the inspection.

Uploaded by

Siti Rohani Isdris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASPEN VISION DEVELOPMENT SDN BHD Doc. Ref.

: AVD/PD/CW
Rev. No. : 0
FORM
ISO Issue Date : 15TH SEPT 2017
CEILING WORK INSPECTION CHECKLIST Page : 1 of 1

Project :

Project Ref. : Location : :

Contractor : Drawing Ref. : :

Block/Unit No. : Date & Time :

No. Items to be checked Acceptability Remarks


YES NO
1. Material as per sample approved
2. False ceiling
a)Ensure type, pattern and height as specified
b)Ensure all M&E services which run in the
ceiling space are fixed
c)Ceiling joist and nogging are securely fix
before fixing the ceiling panel
d)Surface shall be level, aligned edge and free
from sagging
e)No visible crack, stain, hammer mark and
chipped off to the panel
f)Ceiling joint shall be consistent and beading
shall be straight
3. Skim coat
a)Overall surface shall be even
b)Gap between light fittings and ceiling shall not
be seen
c)Formwork joints are grounded smooth
d)No leaks or stains
e)Even paint work
f) No surface cracks

STATUS : YES - Acceptable NO – Unacceptable


Non-Conformance : Correction :

Re-inspection : Remarks :

Checked By : [Consultant’s Rep.] Verified By : [Client’s Rep.]

Signature : ………………………. Signature : ……………………….

Name : Name :

Date : Date :

You might also like