Dynamic, Absolute and Kinematic Viscosity http://www.engineeringtoolbox.com/dynamic-absolute-kinematic-viscosit...

Ads by Google Viscosity Oil Viscosity Chart Dynamic Centipoise Water Velocity

Resources, Tools and Basic Information for Engineering and Design of Technical Applications!

Custom Search

Dynamic, Absolute and Kinematic Viscosity

An introduction to dynamic, absolute and kinematic viscosity and how to convert between CentiStokes (cSt),
CentiPoises (cP), Saybolt Universal Seconds (SSU), degree Engler and more

Sponsored Links

Pressure vs. Flow control

MFCS : a dedicated device for microfluidic flow control
www.fluigent.com
Ads by Google

The viscosity of a fluid is an important property in the analysis of liquid behavior and fluid motion near solid boundaries.

The viscosity is the fluid resistance to shear or flow and is a measure of the adhesive/cohesive or frictional fluid property. The resistance is caused by
intermolecular friction exerted when layers of fluids attempt to slide by one another.

Viscosity is a measure of a fluid's resistance to flow

The knowledge of viscosity is needed for proper design of required temperatures for storage, pumping or injection of fluids.

There are two related measures of fluid viscosity - known as dynamic (or absolute) and kinematic viscosity.

Dynamic (absolute) Viscosity

is the tangential force per unit area required to move one horizontal plane with respect to the other at unit velocity when maintained a unit distance apart by the
fluid.

The shearing stress between the layers of non turbulent fluid moving in straight parallel lines can be defined for a Newtonian fluid as:

The dynamic or absolute viscosity can be expressed like

τ = μ dc/dy (1)

where

τ = shearing stress

μ = dynamic viscosity

Equation (1) is known as the Newtons Law of Friction.

In the SI system the dynamic viscosity units are N s/m2, Pa s or kg/m s where

1 Pa s = 1 N s/m2 = 1 kg/m s

The dynamic viscosity is also often expressed in the metric CGS (centimeter-gram-second) system as g/cm.s, dyne.s/cm 2 or poise (p) where

1 poise = dyne s/cm 2 = g/cm s = 1/10 Pa s

For practical use the Poise is to large and it's usual divided by 100 into the smaller unit called the centiPoise (cP) where

1 p = 100 cP

Water at 68.4oF (20.2oC) has an absolute viscosity of one - 1 - centiPoise.

Kinematic Viscosity
is the ratio of absolute or dynamic viscosity to density - a quantity in which no force is involved. Kinematic viscosity can be obtained by dividing the absolute
viscosity of a fluid with it's mass density

1 of 5 9/18/2010 3:42 PM
Dynamic, Absolute and Kinematic Viscosity http://www.engineeringtoolbox.com/dynamic-absolute-kinematic-viscosit...

ν=μ/ρ (2)

where

ν = kinematic viscosity

μ = absolute or dynamic viscosity

ρ = density

In the SI-system the theoretical unit is m2/s or commonly used Stoke (St) where

1 St = 10-4 m 2/s

Since the Stoke is an unpractical large unit, it is usual divided by 100 to give the unit called Centistokes (cSt) where

1 St = 100 cSt
1 cSt = 10-6 m 2/s

Since the specific gravity of water at 68.4oF (20.2oC) is almost one (1), the kinematic viscosity of water at 68.4oF is for all practical purposes 1.0 cSt.

Viscosity and Reference Temperatures

The viscosity of a fluid is highly temperature dependent and for either dynamic or kinematic viscosity to be meaningful, the reference temperature must be
quoted. In ISO 8217 the reference temperature for a residual fluid is 100oC. For a distillate fluid the reference temperature is 40oC.

For a liquid - the kinematic viscosity will decrease with higher temperature
For a gas - the kinematic viscosity will increase with higher temperature

Other Commonly used Viscosity Units

Saybolt Universal Seconds (or SUS, SSU)

Saybolt Universal Seconds (or SUS) is used to measure viscosity. The efflux time is Saybolt Universal Seconds (SUS) required for 60 milliliters of a petroleum
product to flow through the calibrated orifice of a Saybolt Universal viscometer, under carefully controlled temperature and as prescribed by test method ASTM D
88. This method has largely been replaced by the kinematic viscosity method. Saybolt Universal Seconds is also called the SSU number (Seconds Saybolt
Universal) or SSF number (Saybolt Seconds Furol).

Kinematic viscosity versus dynamic or absolute viscosity can be expressed as

ν = 4.63 μ / SG (3)

where

ν = kinematic vicosity (SSU)

μ = dynamic or absolute viscosity (cP)

Degree Engler

Degree Engler is used in Great Britain as a scale to measure kinematic viscosity. Unlike the Saybolt and Redwood scales, the Engler scale is based on
comparing a flow of the substance being tested to the flow of another substance - water. Viscosity in Engler degrees is the ratio of the time of a flow of 200 cubic
centimetres of the fluid whose viscosity is being measured - to the time of flow of 200 cubic centimeters of water at the same temperature (usually 20oC but
sometimes 50oC or 100oC) in a standardized Engler viscosity meter.

Newtonian Fluids
Fluids for which the shearing stress is linearly related to the rate of shearing strain are designated as Newtonian Fluids.

Newtonian materials are referred to as true liquids since their viscosity or consistency is not affected by shear such as agitation or pumping at a constant
temperature. Fortunately most common fluids, both liquids and gases, are Newtonian. Water and oils are examples of Newtonian liquids.

Shear-thinning or Pseudoplastic Liquids

Shear-thinning or pseudoplastic liquids are those whose apparent viscosity decreases with increasing shear rate. Their structure is time-independent.

Thixotropic Fluids
Thixotropic liquids have a time-dependent structure. The apparent viscosity of a thixotropic liquid decreases with increasing time, at a constant shear rate.

Ketchup and mayonnaise are examples of thixotropic materials. They appear thick or viscous but are possible to pump quite easily.

Dilatant Fluids
Shear Thickening Fluids or Dilatant Fluids increase their viscosity with agitation. Some of these liquids can become almost solid within a pump or pipe line.
With agitation, cream becomes butter and Candy compounds, clay slurries and similar heavily filled liquids do the same thing.

Bingham Plastic Fluids

Bingham Plastic Fluids have a yield value which must be exceeded before it will start to flow like a fluid. From that point the viscosity will decrease with increase
of agitation. Toothpaste, mayonnaise and tomato catsup are examples of such products.

Example - Converting between Kinematic and Absolute Viscosity for Air

2 of 5 9/18/2010 3:42 PM
Dynamic, Absolute and Kinematic Viscosity http://www.engineeringtoolbox.com/dynamic-absolute-kinematic-viscosit...

Kinematic viscosity of air at 1 bar (105 Pa, N/m 2) and 40oC is 16.97 cSt (16.97 10-6 m 2/s).

The density of air estimated with the Ideal Gas Law

ρ =p/RT

where

ρ = density (kg/m 3)

p = absolute pressure (Pa, N/m 2)

R = individual gas constant (J/kg K)

T = absolute temperature (K)

ρ = (105 N/m 2) / ((287 J/kg/K) (273 oC + 33 0C)

= 1.113 kg/m 3

Absolute viscosity can be expressed as

μ = (1.113 kg/m 3) (16.97 10-6 m 2/s)

= 1.88 10-5 (kg/m s, Ns/m 2, P)

Viscosity and Specific Gravity of some Common Liquids

Saybolt Second
centiStokes
Universal Typical liquid
(cSt)
(SSU, SUS)
1 31 Water (20oC)
Milk
4.3 40 SAE 20 Crankcase Oil
SAE 75 Gear Oil
15.7 80 No. 4 fuel oil
20.6 100 Cream
43.2 200 Vegetable oil
SAE 30 Crankcase Oil
110 500
SAE 85 Gear Oil
Tomato Juice
220 1000 SAE 50 Crankcase Oil
SAE 90 Gear Oil
440 2000 SAE 140 Gear Oil

1100 5000 Glycerine (20oC)

SAE 250 Gear Oil
2200 10,000 Honey
6250 28,000 Mayonnaise
19,000 86,000 Sour cream

Kinematic viscosity can be converted from SSU to Centistokes like

νCentistokes = 0.226 νSSU - 195 / νSSU

where

νSSU < 100

νCentistokes = 0.220 νSSU - 135 / νSSU

where

νSSU > 100

Viscosity and Temperature

Kinematic viscosity of liquids like water, mercury, oils SAE 10 and oil no. 3 - and gases like air, hydrogen and helium are indicated below. Note that

for liquids viscosity decreases with temperature

for gases viscosity increases with temperature

3 of 5 9/18/2010 3:42 PM
Dynamic, Absolute and Kinematic Viscosity http://www.engineeringtoolbox.com/dynamic-absolute-kinematic-viscosit...

Sponsored Links

Calculate Pressure Drop Software to Calculate pressure drop in a fluid system www.Flowmaster.com

Water Hammer Analysis Fast, Accurate Software - Large Network Capabilities - Free Demo kypipe.com/surge

Viscosity Measurement Perfect viscosity instrumentation. For any fluid, in any process. www.f5-tech.de

Related Topics

Fluid Flow and Pressure Drop - Pipe lines - fluid flow and pressure loss - water, sewer, steel pipes, pvc pipes, copper tubes and more
Fluid Mechanics - The study of fluids - liquids and gases. Involves various properties of the fluid, such as velocity, pressure, density and
temperature, as functions of space and time.
Material Properties - Material properties - density, heat capacity, viscosity and more - for gases, fluids and solids
Pumps - Piping systems and pumps - centrifugal pumps, displacement pumps - cavitation, viscosity, head and pressure, power
consumption and more

Sponsored Links

Pipe Flow Software 2010 Calc Flow Rate & Pipe Pressure Drop Free Trial, Download Pipe Flow Now! www.PipeFlow.co

Fuel Viscosity & Density Use Kittiwake Equipment to ensure you get What you have Paid For! www.kittiwake.com

Hardness Testers Leeb's rebound-type hardness tester with bluetooth,software for alloys www.portabletesters.com

Related Documents

Absolute or Dynamic Viscosity Online Converter - Convert between dynamic or absolute viscosity units - Poiseuille, Poise, centPoise
and more
Air - Absolute and Kinematic Viscosity - Absolute and kinematic viscosity of air at temperatures ranging -40 - 1000 oC (-40 - 1500 oF) at
standard atmospheric pressure - Imperial and SI Units
Air Properties - Temperature, density, specific heat, thermal conductivity, expansion coefficient, kinematic viscosity and Prandtl's
number for temperatures ranging -150 - 400 oC
Centrifugal Pumps and Viscosity - When a liquid flow through a pump, hydrodynamic losses depends on fluid viscosity
Comparing Secondary Coolants - Specific gravity, freezing points and viscosity for secondary coolants like calcium chloride, sodium
chloride, ethylene glycol and propylene glycol
Dynamic Viscosity of some common Liquids - Absolute or Dynamic Viscosity viscosity of some common fluids
Dynamic or Absolute Viscosity Converting Chart - Absolute or dynamic viscosity converting chart - units like Poiseuille - Poise -
centiPoise and more
Fluids - Kinematic Viscosities - Kinematic viscosities of some common fluids - motor oil, diesel fuel, peanut oil and many more
Friction Loss Viscous Liquids - Friction loss in steel pipes - viscosities ranging 32 - 80000 SSU
Friction Loss Viscous Liquids - Friction loss in schedule 40 steel pipe with viscous liquids with viscosity from water to 1500 SSU
Fuel Oils - Viscosities - Fuels oils - their viscosity versus temperature
Heat Emission from Pipes Submerged in Oil or Fat - Heat emission from steam or water heating pipes submerged in oil or fat -
assisted (forced) and natural circulation
ISO Grade Oil Properties - Viscosity and density of ISO Grade oil
Industrial Lubricants - Viscosity ISO-VG Grade - ISO-VG viscosity grades for industrial lubricants
International Standard Atmosphere - International standard atmosphere - ranging elevation -2000 to 30000 meters - pressure,
temperature, density, viscosity, thermal conductivity and velocity of sound
Kinematic Conversion Diagram - Convert diagram between Centistokes, Saybolt and Redwood seconds
Kinematic Viscosity Online Calculator - Convert between different kinematic viscosity units - centistokes, poise, lentor and more
Major loss in Ducts, Tubes and Pipes - Major loss - head loss or pressure loss - due to friction in ducts, pipes and tubes

4 of 5 9/18/2010 3:42 PM
Dynamic, Absolute and Kinematic Viscosity http://www.engineeringtoolbox.com/dynamic-absolute-kinematic-viscosit...

Oil Viscosity Conversion Values - Convert between common oil viscosity units
Pressure Drop in Oil Pipes - Pressure drop in oil pipes - viscosity ranging 100 - 600 Saybolt Universal Seconds
Recommended Delivery Flow Velocity of Viscous Liquids - Normal flow velocities on the delivery side of the pump in viscous systems
Reynolds Number - An introduction and definition of the dimensionless Reynolds Number - with online calculators
SAE Multigrade Oil Properties - Viscosity and density of SAE Grade oil
Steam Viscosity - Steam absolute viscosity at pressures ranging 1 - 10000 psia
Viscosity Converting Chart - A converting table between viscosity units like Centiposes, milliPascal, CentiStokes and SSU
Viscous Fluids - Recommended Suction Flow Velocity - Recommended suction flow velocity of viscous fluids
Water - Absolute or Dynamic Viscosity - Absolute, or dynamic viscosity of water in centipoises for temperatures between 32 - 200oF
Water - Dynamic and Kinematic Viscosity - Viscosity of water at temperatures between 0 - 100oC (32 - 212oF) - in Imperial and SI Units
Williams Hazens Equation of Pressure Drop - The Hazen-Williams equation can be used to calculate pressure drop (psi) in pipes or
tubes due to friction

ToolBox Short List

Difficult to find your favorite ToolBox page? Add links to your favorite pages in your own personal Short List!

• Add this Page! • Delete the ShortList!

Engineering ToolBox - SketchUp Edition - Online 3D modeling!

Engineering ToolBox - SketchUp Edition - enabled for use with the amazing, fun and free Google SketchUp.

Search the ToolBox

Custom Search

Translate the ToolBox

Arabic - Chinese (Simplified) - Chinese (Traditional) - Dutch - French - German - Italian - Japanese - Korean - Portuguese - Russian - Spanish

About the ToolBox

We appreciate any comments and tips on how to make The Engineering ToolBox a better information source. Please contact us by email

[email protected]

if You find any faults, inaccuracies, or otherwise unacceptable information.

The content in The Engineering ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY. Important information should always
be double checked with alternative sources. All applicable national and local regulations and practices concerning this aspects must be strictly
followed and adhered to.

Advertise in the ToolBox

If you want to promote your products or services in this site - please follow this link.

5 of 5 9/18/2010 3:42 PM