Scribd
Upload
300 views3 pages

Eaton Corporation

This document is an engineering specification sheet for an Eaton Corporation hydraulics division variable displacement pump. It provides details on the pump model number, description, dimensions, ports, controls, auxiliary features, and notes. Key details include the pump is a 39 series with 63.66 cm3/r displacement at 18 degrees, manual control, standard valve plate and ports, and no special features. The sheet also specifies a charge pump model with 21 cm3/r displacement, 340 lbf/in2 relief setting, and steel core gasket.

Uploaded by

Chris Robles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
300 views3 pages

Eaton Corporation

This document is an engineering specification sheet for an Eaton Corporation hydraulics division variable displacement pump. It provides details on the pump model number, description, dimensions, ports, controls, auxiliary features, and notes. Key details include the pump is a 39 series with 63.66 cm3/r displacement at 18 degrees, manual control, standard valve plate and ports, and no special features. The sheet also specifies a charge pump model with 21 cm3/r displacement, 340 lbf/in2 relief setting, and steel core gasket.

Uploaded by

Chris Robles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Page 1 of 3

EATON CORPORATION - HYDRAULICS DIVISION


14615 LONE OAK ROAD, EDEN PRAIRIE, MN 55344
ENGINEERING SPECIFICATION SHEET

PRODUCT LINE : Pump REVISION : B


PRODUCT NO : 3923-134 MODEL CODE :
ACA392314L0A00MAG0000EE00000000B
INSTALACION : 3923-134 0 . . . . 0 . . . .1 . .
.1 . . . . 2 . . . . 2 . . . .3 . . . . 3
---------------------------------------------------------------------------0--
-------5--------0-------5-------0--------5------0-------5
DOCUMENT BASED ON ANSI Y14.5M-1982 ALL DIMENSIONS ARE IN
MILLIMETERS (INCHES)
DESCRIPTION:
ACA PRODUCT SERIES – HYDROSTATIC – HEAVY DUTY VARIABLE PUMP
39 DISPLACEMENT – 63,66 cm3/r [3.885 in3,r] AT 18 DEG
2 TYPE – VARIABLE DISPLACEMENT PUMP
3 DESIGN TYPE – SERIES 1 [MODELS 33 -64]
14 INPUT SHAFT – 14 TOOTH 12/24 PITCH SPLINE (MODELS 33-64)
L INPUT ROTATION – COUNTERCLOCKWISE [LEEFTHAND]
0. VALVE PLATE – STANDARD [V – GROOVE]
A MAIN PORTS – [1.00] - CODE 61 PER SAE J518
0 POWER LIMITER VALVE SETTING PORT A - NONE
0 POWER LIMITER VALVE SETTING PORT B - NONE
MA CONTROL – MANUAL
G CONTROL SUPPLY ORIFICE (P) – 1; 85 [.073] DIAMETER
0 CONTROL ORIFICE - UPPER SERVO (S1) - NONE
0 CONTROL ORIFICE - LOWER SERVO (S2) - NONE
0 PRESS OVERRIDE – NONE
0 PRESS SETTING FOR PRESSURE OVERRIDE - NONE
0 CONTROL SPECIAL FEATURES – NO CONTROL SPECIAL FEATURES
E CHANGE PUMP – NO CHARGE PUMP
E AUXILIARY MOUNTING – SAE C-PAD; (TYPICALLY FRONT PUMP OF TANDEM) NO
SHAFT SEAL; INCLUDES 14 TOOTH 12/24 PITCH SPLINE COUPLING; CHARGE
PRESSURE INLET PORT WITH 7/8-14 UNF; 37 DEGREE FLARE; TUBE FITTING (45
DEGREE FOR NODELS 33-64 AND STRAIGHT FOR MODELS 54-64)
0 CHARGE PUMP DISPLACEMENT – NO CHARGE PUMP
0 2nd DISPLACEMENT OF DUAL ELEMENT – NO CHARGE PUMP
0 CHARGE PRESSURE REL VALVE SETTING - NONE
0 CHARGE PUMP SPECIAL FEATURES – NO CHARGE PUMP SPECIAL FEATURES
00 SPECIAL PUMP ASSEMBLY FEATURES – NO SPECIAL FEATURES}
0 PAINT AND PACKAGING – PAINTED PRIMER BLUE (STANDARD)
0 IDENTIFICATION ON UNIT - STANDARD
B DESIGN CODE – B

NOTES:
SHAFT SEAL KIT; 990709-000
SEAL KIT; 99088-000
Page 2 of 3

NOTICE: EATON CORPORATION PROPRIETARY INFORMATION

EATON CORPORATION - HYDRAULICS DIVISION


14615 LONE OAK ROAD, EDEN PRAIRIE, MN 55344
ENGINEERING SPECIFICATION SHEET

PRODUCT LINE : HD REVISION : B


PRODUCT NO : 3923-135 MODEL CODE :
ACA392314L0A00MAG00000F030KA1500B
INSTALACION : 3923-135 0 . . . . 0. . . . 1. . . .1
. . .2 . . . .2 . . . .3 . . . . 3
---------------------------------------------------------------------------0--
-------5--------0-------5-------0--------5------0-------5
DOCUMENT BASED ON ANSI Y14.5M-1982 ALL DIMENSIONS ARE IN
MILLIMETERS (INCHES)
DESCRIPTION:
ACA PRODUCT SERIES – HYDROSTATIC – HEAVY DUTY VARIABLE PUMP
39 DISPLACEMENT – 63,66 cm3/r [3.885 in3,r] AT 18 DEG
2 TYPE – VARIABLE DISPLACEMENT PUMP
3 DESIGN TYPE – SERIES 1 [MODELS 33 -64]
14 INPUT SHAFT – 14 TOOTH 12/24 PITCH SPLINE (MODELS 33-64)
L INPUT ROTATION – COUNTERCLOCKWISE [LEEFTHAND]
0. VALVE PLATE – STANDARD [V – GROOVE]
A MAIN PORTS – [1.00] - CODE 61 PER SAE J518
0 POWER LIMITER VALVE SETTING PORT A - NONE
0 POWER LIMITER VALVE SETTING PORT B - NONE
MA CONTROL – MANUAL
G CONTROL SUPPLY ORIFICE (P) – 1; 85 [.073] DIAMETER
0 CONTROL ORIFICE - UPPER SERVO (S1) - NONE
0 CONTROL ORIFICE - LOWER SERVO (S2) - NONE
0 PRESS OVERRIDE – NONE
0 PRESS SETTING FOR PRESSURE OVERRIDE - NONE
0 CONTROL SPECIAL FEATURES – NO CONTROL SPECIAL FEATURES
F CHARGE PUMP WITH EXTERNAL DISCHARGE PORT WITH 90 DEGREE,
7/8-14 UNF, 37 DEGREE FLARE TUBE FITTING
0 AUXILIARY MOUNTING – NO AUXILIRY MOUNTING
3 CHARGE PUMP DISPLACEMENT – 21,0 cm3/r [1.28 in3/r]
0 2nd DISPLACEMENT OF DUAL ELEMENT – NO DUAL ELEMENT
K CHARGE PRESSURE REL VALVE SETTING – 23 BAR [340 lbf / in2]
A CHARGE PUMP SPECIAL FEATURES – STEEL CORE CHARGE PUMP GASKET
15 SPECIAL PUMP´ASSEMBLY FEATURES – REAR PUMP UNIT FOR TANDEM PUMP
0 PAINT AND PACKAGING – PAINTED PRIMER BLUE (ESTÁNDAR)
0 IDENTIFICATION ON UNIT - STANDARD
B DESIGN CODE – B
Page 3 of 3

NOTES:
SEAL KIT: 990088-000

You might also like