Scribd
Upload
222 views

Sempertrans Productsheet Translev en July 2017 Web 04

The document describes different types of elevator belts produced by Sempertrans. It provides details on the Translev M, T, and TR belts, including their constructions, applications, specifications, and available covers.

Uploaded by

tadela_553439598
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views

Sempertrans Productsheet Translev en July 2017 Web 04

The document describes different types of elevator belts produced by Sempertrans. It provides details on the Translev M, T, and TR belts, including their constructions, applications, specifications, and available covers.

Uploaded by

tadela_553439598
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

transLEVTM

THE REFERENCE FOR ELEVATOR BELTS

PRODUCT SHEET

HIGHLIGHTS
 Optimal solution for safe material transport
in elevator conveyors
 Available with textile or steel cord reinforce-
ments
 Easy bolting of elevator buckets
 For light to heavy applications
TranslevTM is a tailor-made engineered solution
 Belt widths up to 2000 mm
recommended for elevator belts. It is available in  Nominal belt strengths up to 4000 N/mm
three versions.

TRANSLEV TM M
The Translev M has a full steel carcass design.
APPLICATIONS
Steel cords in longitudinal direction provide
high nominal belt strength at low elongation,
Open-pit mining
as well as two layers of steel wefts in cross
Lignite and hard rock mining
direction. This construction provides the
highest bolt pull-out values combined with
the highest possible puncture resistance. Steel industry

Grain and sugar industries


Product benefits Salt industry
E  xcellent bucket attachment and bolting
Mineral processing plants
 Outstanding cord adhesion which is of particular importance for
high temperature applications
Paper and wood industries
 Full rubber penetration and high cord adhesion values due to
Recycling industry
optimised rubber compound in combination with the open steel
Port operations
cord design
Power and heating plants
 Small longitudinal cord diameters allow smaller pulley diameters
Chemical industry and fertilisers
Available with heat resistant covers:
T  EA cover for material up to 80 °C (130 °C peaks)
 TEB cover for material up to 100 °C (150 °C peaks)
 TEC cover for material up to 130 °C (200 °C peaks)
COVERS
 Transflam (flame retardant)
DATA  Transoil (oil resistant)
Translev M standard range (other strengths and dimensions are  Transtherm (heat resistant)
available on request):
Belt width: 300 mm to 1800 mm
Nominal belt strength: 1000 N/mm to 2250 N/mm

Translev M standard range


Nominal belt strength 1000 1250 1600 2000 2250
(N/mm)
Thickness (mm) 13.6 13.6 13.6 13.6 13.6

www.sempertrans.com
TRANSLEV TM T: for light applications DATA
(e.g. transport of grains)  ranslev T standard range (other strengths and dimensions
T
L  ow elongation fabric carcass with high bolt pull-out are available on request:
strength Belt width: Up to 1690 mm
 Thin carcass allows for very small pulley diameters Nominal belt strength: 400 N/mm to 1600 N/mm
 Translev T can be used in almost any application in combi-
nation with different cover types. Translev T with GMS cover standard range

Besides the standard anti-abrasive grades, special cover Cover thickness (mm) 1.5+2.5 1.5+2.5 1.5+2.5 1.5+2.5 1.5+3 1.5+3
grades meeting special application requirements are also Nominal belt strength 400 500 630 800 1000 1250
possible. One example is the GMS belt construction which
(N/mm)
Number of plies 3 3 4 4 4 4
has been specially developed for Translev T to respond
to the two major challenges involved in the handling of
grains:
 Swelling due to contact with oily/greasy substances (wood COVERS
chips, grains, seeds, etc)
 Transflam (flame retardant and anti-static)
 Risk of explosion/propagation of fire
 Transflam oil (flame retardant, anti-static and oil resis-
tant in GMK and GMS)
 Transoil (oil resistant)
 Transtherm (heat resistant)
TRANSLEV TM TR
TRANSLEV TM T

APPLICATIONS
 Paper and wood industries
Steel industry Recycling industry
Port operations
Grain and sugar industries Power and heating plants
Salt industry  Chemical industry and
 Mineral processing plants fertilisers

TRANSLEV TM TR: for medium to heavy DATA


applications Translev TR standard range (other strengths and dimensions
Translev TR is an upgrade of the standard version with its are available on request:
textile carcass (polyester warp, polyamide weft) inserted Belt width: 300 mm to 1650 mm
between two strong transverse textile reinforcements and Nominal belt strength: 500 N/mm to 1250 N/mm
covers.
Product benefits
Translev TR standard range
Cover thickness (mm) 2.0+2.0 2.0+2.0 2.5 + 2.5 3.0+3.0
H  igher bolt pull-out strength for outstanding bucket
attachment and enhanced carcass protection Nominal belt strength 630/4 800/4 1000/5 1250/6
Version 1 07/2017 © Sempertrans 2017. All rights reserved.

(N/mm)
 Very low elongation allowing small pulley diameters Number of plies 4(+2) 4(+2) 5(+2) 6(+2)
 Remarkable bucket attachment values owing to its multi-
layer structure
 Fabrics with stabilised elongation are protected by two
transverse reinforcements from cuts and punctures. COVERS
Available with heat resistant covers:  Transflam (flame retardant Grades K and S)
T  EA cover for material up to 80 °C (130 °C peaks)  Transflam oil (GMK, GMS)
 TEB cover for material up to 100 °C (150 °C peaks)  Transoil (oil resistant)
 TEC cover for material up to 130 °C (200 °C peaks)  Transtherm (heat resistant)

CONTACT US:
www.sempertrans.com www.sempertrans.com/contact
[email protected]

You might also like