Scribd
Upload
310 views

Circular Hollow Concrete Column

This document summarizes the design of a circular hollow concrete column according to Chinese standard GB 5. Key details include an outer diameter of 2400mm, inner diameter of 2040mm, factored compressive force of 2925kN, and factored bending moment of 4408kN-m. Solving two equations related to the eccentricity and forces on the column yields an alpha value of 0.277 and rebar area of 18371mm^2.

Uploaded by

Uttam Kumar Ghosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
310 views

Circular Hollow Concrete Column

This document summarizes the design of a circular hollow concrete column according to Chinese standard GB 5. Key details include an outer diameter of 2400mm, inner diameter of 2040mm, factored compressive force of 2925kN, and factored bending moment of 4408kN-m. Solving two equations related to the eccentricity and forces on the column yields an alpha value of 0.277 and rebar area of 18371mm^2.

Uploaded by

Uttam Kumar Ghosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Design of circular hollow concrete column as per Chinese Standard GB 5

Outer diameter of column do =h (mm)= 2400


Inner diameter of column di (mm)= 2040
Factored compressive force on column bottom N (kN)= 2925
Factored bending moment at column bottom M (kN-m)= 4408
Clear cover of rebars (mm)= 30
Effective length of column L0 (mm)= 79200 Design values of concrete (
Grade of concrete = C30 C20 C25
Yield stress of rebars fy (Mpa)= 360 5 fc 9.6 11.9
Young modulus of rebars Es (Mpa)= 200000
Percentage of rebars considered = 0.8
Diameter of vertical rebars (mm)= 25
Diameter of stirrups (mm)= 8
Design value of axial compressive strength of concrete fc (Mpa)= 14.3
Lo/d0= 33
Stability coefficient of rebars Ф=1/[1+0.002*(L0/d0-8)^2]= 0.44
Area of concrete section A (mm2)= 1255380
Interaction ratio of column for compression only Uc= 0.16
Eccentricity due to bending moment e0=M/N (mm)= 1507.0
Additional eccentricity as per clause no. 7.3.3 (mm)= 80.0
Total eccentricity ei=e0+ea equation 7.3.7-6(mm)= 1587.0
Corrected coefficient for sectional curvature of eccentric compression 1
member as per clause no 7.3.10 ζ1=max(1, 0.5*fc*A/N)=

Influence co-efficient considering the influence of slenderness ratio of 0.82


member on sectional curvature as per clause no 7.3.10
ζ2=if(Lo/h<15, 1, (1.15-0.01*L0/h)=

Outer radius of column r2 (mm)= 1200


Inside radius of column r1 (mm)= 1020
Radius of circumference where the centroid of longitudinal ordinary 1149.5
steel reinforcements situated rs (mm)=
Effective depth of section h0 (mm)= 2349.5
Eccentricity enhancement coefficient as per clause no 7.3.10 1.94
η=1+ζ1*ζ2*(1/(1400ei/ho)*(Lo/h)^2=

α1= 1
αt=1-1.5α (equation 7.3.7.5)
The following two equations are to be solved to determine α
N≤[α*α1*fc*A+(α-α1)fy*As] --------------------------equation 7.3.7-1
N*η*ei≤[α1*fc*A(r1+r2)*(Sinπα/2π)
+fy*As*rs*(Sinπα+Sinπαt)/π]-------------------equation 7.3.7-2

αt=1-1.5*α
Putting the value of As & αt from the above equations to 7.3.7-2 we 0
get,
[α1*fc*A(r1+r2)*(Sinπα/2π)+fy*[(N-α*α1*fc*A)/((α-
αt)*fy)]*rs*(Sinπα+Sinπ(1-1.5α))/π]-N*η*ei≥0

1 of 3
Putting the value of As & αt from the above equations to 7.3.7-2 we 0
get,
[α1*fc*A(r1+r2)*(Sinπα/2π)+fy*[(N-α*α1*fc*A)/((α-
αt)*fy)]*rs*(Sinπα+Sinπ(1-1.5α))/π]-N*η*ei≥0

α= 0.277
From equation 7.3.7-1, As=(N-α*α1*fc*A)/((α-αt)*fy)= 18371

2 of 3
e Standard GB 50010-2002

Design values of concrete (Table 4.1.4)


C30 C35 C40 C45 C50
14.3 16.7 19.1 21.1 23.1

3 of 3

You might also like