Scribd
Upload
158 views3 pages

DHG Ro 20

This document is a 3-page specification sheet for a cooling tower. It provides details on the model, design conditions, materials, piping layout, and mechanical equipment. The tower is a round, induced draft, counterflow type with a diameter and height of 1170mm x 1860mm. It has 1 cell and is designed for a flow of 15.6 cubic meters per hour at inlet and outlet temperatures of 37C and 32C respectively. Components include a fiberglass casing, polypropylene filler, and a single axial fan powered by a 3-phase electric motor.

Uploaded by

mdalt9180
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views3 pages

DHG Ro 20

This document is a 3-page specification sheet for a cooling tower. It provides details on the model, design conditions, materials, piping layout, and mechanical equipment. The tower is a round, induced draft, counterflow type with a diameter and height of 1170mm x 1860mm. It has 1 cell and is designed for a flow of 15.6 cubic meters per hour at inlet and outlet temperatures of 37C and 32C respectively. Components include a fiberglass casing, polypropylene filler, and a single axial fan powered by a 3-phase electric motor.

Uploaded by

mdalt9180
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SHEET NO.

SPECIFICATION SHEET FOR COOLING TOWER


DAE HWA TECH 1/3

Project Name COOLING WATER SYSTEM


INFORMATION
All data set forth herein is in accordance with definitions and standards Published by the Cooling Tower Institute.

Symbol * = minimum information to be filled - in by customer, other items may be specified at customer's option.

GENERATION
SELECTION INDUCED DRAFT WATER COOLING TOWER

TOWER MODEL DHG-RO-20

TYPE F.R.P ROUND(COUNTER FLOW) TYPE

DESIGN & OPERATING CONDITIONS


* Circulating Water Flow, M 3/HR 15.6

* Hot(inlet) Water Temp. ℃ 37

* Cold(outlet) Water Temp. ℃ 32

Wet Bulb Temp. Inlet ℃ 27

Ambient Temp. ℃ -

Relative Humidity % -

Tower Pump Head, M -

Nominal Capacity, Kcal/Hr 78,000

Drift Loss, % of circurating flow 0.01

Evaporation Loss(at design), % 0.83

* Tower Site(ground level,roof,etc.) GROUND

* Elevation Above Sea Level, M -

* Tower Explosure NONE

PHYSICAL DETAILS
Number of Cells 1

Upper Body, Piece 1


Center Body, Piece 1

Under Body, Piece 1

Overall Tower Dimension, DIA.(Φ)× H, mm 1170 × 1860

Water Basin Dimension, B.C.D(Φ), mm 900

Access to Top of Tower -

Shipping Weight, Kg 117

Operating Weight, Kg 226

DOC. NO. REV. : A

QSIF-042-05-19 DAE HWA TECH CO.,LTD. A4(210 x 297)mm


SHEET NO.
SPECIFICATION SHEET FOR COOLING TOWER
DAE HWA TECH 2/3

Project Name COOLING WATER SYSTEM


MATERIALS OF CONSTRUCTION
Frame work Members
Casing F.R.P 5t
Filler P.P 0.4t
Filler Support SS400+H.D.G
Drift Eliminators -
Water Distribution - Type Sprinkler Pipe
Material P.V.C
Center Pipe P.V.C
Suction Tank -
Motor Support SS400+H.D.G
Support Frame -
Leg -
Ladder -

WATER PIPING CONSTRUCTION


Water Inlet Number 1
Size 50A
Height 기초로부터 INLET 중심부까지 100mm
Water Outlet Number 1
Size 50A
Height 기초로부터 OUTLET 중심부까지 100mm
Center pipe Number 1
Size 50A
Suction Tank Number -
Size -
Sprinkler Number 1
Size 50A
Sprinkler Pipe Number 4
Size 25A
Drain Number 1
Size 25A
Overflow Number 1
Size 25A
Auto. Make-up Number 1
Size 15A
Manual Make-up Number -
Size -

DOC. NO. REV. : A

QSIF-042-05-19 DAE HWA TECH CO.,LTD. A4(210 x 297)mm


SHEET NO.
SPECIFICATION SHEET FOR COOLING TOWER
DAE HWA TECH 3/3

Project Name COOLING WATER SYSTEM


MECHANICAL EQUIPMENT

FANS
Number 1

Type AXIAL FLOW

Manufacturer DAE HWA TECH

Diameter(Φ). mm 600

Number of Blades 4

Blade Material AL+ALLOY

Hub Material -

Fan Speed, R.P.M. 1150

Air Volume, m 3/min 150

Fan Total Efficiency(%) 65

SPEED REDUCER
Number -

Type -

Model -

Manufacturer -

Reduction Ratio -

AGMA Mechanical H.P Rating -

Service Factor at Rated H.P. of Driver -

No. of Reductions -

DRIVE
Number 1

Kind SQUIRREL CAGE INDUCTION MOTOR


Type T.E.F.C

Manufacturer MAKER STD.

Full Load Speed, R.P.M 1200

Elec. Char - phase / cycles / volt 3/60/220/380/440 "F" CLASS, IP54

Rated H.P 1 / 2HP x 6P

ADDITIONAL DATA

DOC. NO. REV. : A

QSIF-042-05-19 DAE HWA TECH CO.,LTD. A4(210 x 297)mm

You might also like