Scribd
Upload
112 views

ETAP FAQ - Powerplot

1) The document discusses an error message "Tap addition must be a number" that occurs in PowerPlot v2.5 when using a non-English keyboard. 2) The error happens because non-English keyboards use commas instead of periods for decimal points. 3) To fix it, the user must change their computer's regional settings to use a period instead of comma as the decimal symbol.

Uploaded by

Atabat Adudu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

ETAP FAQ - Powerplot

1) The document discusses an error message "Tap addition must be a number" that occurs in PowerPlot v2.5 when using a non-English keyboard. 2) The error happens because non-English keyboards use commas instead of periods for decimal points. 3) To fix it, the user must change their computer's regional settings to use a period instead of comma as the decimal symbol.

Uploaded by

Atabat Adudu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ETAP FAQ # 25 - Tap Addition Must Be A Number

ETAP FAQ # 25
PowerPlot v2.5
Tap Addition Must Be A Number

Description: Tap addition must be a number error message.

Version: PowerPlot v2.5

Published: November 17, 2002

Error Message:
Tap addition must be a number.

Condition:
Non-English keyboard is used.

Solution:
An error message occurs when the user enters the settings in the device editor and attempts to display the curve. This
error is caused since in non-English languages a comma is used as a decimal point. To correct the problem, follow
these instructions:

1. Select My Computer
2. Select Regional Settings or Configurations
3. Select Number
4. In the decimal symbol edit box, replace the comma with a period.

You might also like