Medi-Caps Institute of Technology and

Management

ATM SIMULATOR

A Minor Project Report Submitted to

Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal

In partial fulfillment of the degree

of

Bachelor of Engineering

In

Computer Science & Engineering

Submitted To : Submitted By :
Ms.AKANKSHA GOUR RISHABH AATHIYA(0812CS151093)
ASST.PROFESSOR. RAJESH BADERA(0812CS151088)
SACHIN MALVIYA(0812CS151099)

Department of Computer Science and Engineering

June,2018
(i)

 Medi-Caps Institute of Technology and
Management

ATM SIMULATOR

A Minor Project Report Submitted to

Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal

In partial fulfillment of the degree

of

Bachelor of Engineering

In

Computer Science & Engineering

Submitted To : Submitted By :
Ms.AKANKSHA GOUR RISHABH AATHIYA(0812CS151093)
ASST.PROFESSOR. RAJESH BADERA(0812CS151088)
SACHIN MALVIYA(0812CS151099)

Department of Computer Science and Engineering

June, 2018
(ii)

 Medi-Caps Institute of
Technology and Management
A.B. Road, Pigdamber, Indore – 453 331 (M.P.)
Ph. : (0731) 4259700, 4259500, Fax : 4259501
Website : www.medicaps.ac.in
e-mail : [email protected]

CERTIFICATE

This is to certify that RISHABH AATHIYA(0812CS151093),RAJESH BADERA(0812CS151088)

SACHIN MALVIYA(0812CS151099) have completed their Minor project work titled “ATM
SIMULATOR” as per the curriculum and submitted a satisfactory report on this project as a part of
fulfilment towards the degree of Bachelor of Engineering (Computer Science & Engineering) from

Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal.

Signature:________________ Signature:________________

Name:RAKESH GIRI GOSWAMI Name:__________________

(Project Guide) (Internal Examiner)

(iii)
 Medi-Caps Institute of
Technology and Management
A.B. Road, Pigdamber, Indore – 453 331 (M.P.)
Ph. : (0731) 4259700, 4259500, Fax : 4259501
Website : www.medicaps.ac.in
e-mail : [email protected]

CERTIFICATE

This is to certify that RISHABH AATHIYA(0812CS151093),RAJESH BADERA(0812CS151088)

SACHIN MALVIYA(0812CS151099) have completed their Minor project work titled “ATM
SIMULATOR” as per the curriculum and submitted a satisfactory report on this project as a part of
fulfilment towards the degree of Bachelor of Engineering (Computer Science & Engineering) from

Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal.

Signature:________________

Name:__________________

(External Examiner)

(iv)
 ACKNOWLEDGEMENT

The most awaited moment of successful completion of an endeavor is always a result of

persons involved implicitly or explicitly in it. The successful completion of all the phases of our
project is the result of dedicated efforts put in by many people and this report would be
incomplete without giving due credits to them. This acknowledgment is but a small token of
gratitude in recognition of their help in our endeavor.

We sincerely thank our project guide Mr.RAKESH GIRI GOSWAMI for providing us her
precious time, considering our doubts, mostly arose at odd times and providing us the
solutions that always takes us out from all the chaos. It has been an honor and pleasure to
work under her. Not just the technical knowledge but a lot we have learnt from her calm and
composed attitude for which we will remain indebted to mam throughout our life.

We express a deep sense of gratitude to our project coordinator Ms.AKANKSHA GOUR for her

invaluable support and constant encouragement which was of great support to bring this work to

present shape.

We would like to give our sincere thanks to , HOD of Computer Science Department from
whom we have learned a lot.

Last but not the least; we would like to thanks our colleagues, friends and our parents who were a
constant and willing source of encouragement and inspiration for us throughout the project.

RISHABH AATHIYA(0812CS151093)
RAJESH BADERA(0812CS151088)
SACHIN MALVIYA(0812CS151099)

(v)
CONTENT

1.Introduction …………………………………………………………………….. 01


1.1 Purpose/Aim of Project/.................................................... 02
1.2Scope……………………………………………………………………. 02
1.3 Objectives…………………………………………………… 02

2. Tools / Platform / Languages………………….. 03

2.1.Tools……………………………………….. 04
2.2.Platform………………………………………… 04
2.3.Languages……………………………………………. 04

3.Planning and Scheduling......................................... 05

3.1.Project and Planning figure……………………… 06

4.System Analysis............................................. 07
4.1.Study of current /Existing system……………. 08
4.2.Feasibility study…………………………………… 08
4.3.Design of new proposed system ( UML )…………………………………. 09

5.System Design.................................. 10
5.1.Data dictionary(Account)…………………….. 11
5.1.2.Data dictionary(Balance)………………………. 12

6. Testing............................................. 19
6.1.Testing objectives………………… 20
6.2.Testing scope…………………………. 21
6.3.Testing principle………………………….. 21
6.4.Testing method used………………………… 22
6.5.Test cases………………………………………. 23

7.Limitation 26

8.Futurescope 28

9.Conclusion 30

10.Bibliography and References 32

(vi)