Scribd
Upload
57 views

Silo Cals

The document provides calculation data for designing a shell with an outside diameter of 5000 mm under a design pressure of 600 kPa and temperature of 40 C. It lists the design code, materials, strength values, safety factor, and correction factors used to calculate the required plate thickness of 16 mm for the shell based on the given parameters, codes, and formulas.

Uploaded by

Yakubu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
57 views

Silo Cals

The document provides calculation data for designing a shell with an outside diameter of 5000 mm under a design pressure of 600 kPa and temperature of 40 C. It lists the design code, materials, strength values, safety factor, and correction factors used to calculate the required plate thickness of 16 mm for the shell based on the given parameters, codes, and formulas.

Uploaded by

Yakubu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

CALCULATION DATA

Design Code AD Merkblatter , 1977


Design Pressure P 600 kPa 6 barg
Design Temperature 40 C
Outside Diameter Da 5000 mm
Material HII
Material Strength K <= 16 mm 255 N/mm2
K> 16 mm 245 N/mm2
Safety Factor S 1.5
Dished End Factor b 4.1
Joint Factor V Shell 0.85
V Dished End 1
Plate Thickness Allowance C1 0.5 mm
Corrossion Allowance C2 3 mm

SHELL THICKNESS CALCULATION - B1


=(𝐷_(𝑎 ) 𝑥 𝑃)/(20 𝑥 𝐾/𝑆 𝑥 𝑉+𝑃 )+ 𝐶_1+𝐶_2
S

S 13.8591160221 mm
16 mm

Inlet Nozzle S1
SS
DIN 17155 225
DIN 17155

Used
`

You might also like