Scribd
Upload
412 views1 page

Nah

Glue guns can be used to help make handicrafts. To operate a glue gun, first clean any old glue from the nozzle. Then insert a glue stick into the nozzle and plug the gun into an electric socket. Allow the gun to warm up, then squeeze the trigger gently to melt the glue stick. Finally, apply the liquid glue from the gun to surfaces you wish to stick together to complete your handicraft project.

Uploaded by

dedesafrayogisupardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
412 views1 page

Nah

Glue guns can be used to help make handicrafts. To operate a glue gun, first clean any old glue from the nozzle. Then insert a glue stick into the nozzle and plug the gun into an electric socket. Allow the gun to warm up, then squeeze the trigger gently to melt the glue stick. Finally, apply the liquid glue from the gun to surfaces you wish to stick together to complete your handicraft project.

Uploaded by

dedesafrayogisupardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Nah, dengan langkah – langkah yang rinci seperti diatas, tentunya orang yang membaca ataupun

mendengar penjelasan procedure text kita akan dengan mudah memahami dan dapat
mempraktikkan step – step dalam procedure text tersebut. Oke, untuk procedure text selanjutnya
kami akan menampilkan cara pengoprasian lem tembak atau Glue Gun.
How To Use A Glue Gun (Cara Menggunakan Lem Tembak)

Procedure Text How To Use A Glue Gun


The word “Glue Gun” may sounds dangerous for us, but it is not an actual gun to shot a bullet.
Instead it can help us in making a handicraft. In the process the heat from the gun will melt the
glue stick and turn it into liquid form that we can use to stick anything including the parts of our
handicraft. Follow these following steps if you want to use the Glue Gun.
1. Check and clean the glue gun from any old glue clogging in the nozzle.
2. Put the glue stick into the gun nozzle.
3. Insert the plug into the electricity socket.
4. Prepare a sheet of paper and put the glue gun on it.
5. Wait until the gun get warmer.
6. Squeeze the trigger gently to check if the glue stick has changed into liquid form.
7. Finaly, you can apply it on any surface that you want to stick by using this glue gun.

You might also like