Scribd
Upload
79 views

Vibration Exciter (2N To 100N) : Use Scenarios

This benchtop vibration exciter unit can impart forces from 2N to 100N for applications such as accelerometer calibration and mechanical impedance measurements. It features a frequency range of 10Hz to 20kHz and continuous displacement of 8mm peak-to-peak, and can impart up to 45N of sine force or 60N with assisted cooling. The unit can be customized with various accessories and is designed to be powered by our 75VA amplifier or third-party amplifiers for versatile vibration testing needs.

Uploaded by

Vignesh Selvaraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views

Vibration Exciter (2N To 100N) : Use Scenarios

This benchtop vibration exciter unit can impart forces from 2N to 100N for applications such as accelerometer calibration and mechanical impedance measurements. It features a frequency range of 10Hz to 20kHz and continuous displacement of 8mm peak-to-peak, and can impart up to 45N of sine force or 60N with assisted cooling. The unit can be customized with various accessories and is designed to be powered by our 75VA amplifier or third-party amplifiers for versatile vibration testing needs.

Uploaded by

Vignesh Selvaraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VIBRATION EXCITER (2N to 100N)

This benchtop unit offers versatility and dependability for a range of applications, including
mechanical impedance and mobility measurements and accelerometer calibration.

Type 4809 features a wide frequency range (10 Hz – 20 kHz) and a continuous displacement of 8 mm
(0.32 in) peak-to-peak. It can impart 45 N (10 lbf) of sine force – or up to 60 N (13.5 lbf) with assisted
cooling.

Our 75 VA Power Amplifier Type 2718 has been designed specifically to drive this exciter; however,
Type 4809 can also be powered without forced-air cooling by any third-party amplifier with the adequate
voltage rating.

To meet your exact testing needs, Type 4809 can be customized with a range of accessories,
including trunnions, power amplifiers, nylon stingers and push-pull rods, force transducers and
impedance heads.

USE SCENARIOS

 Accelerometer calibration
 Vibration testing of small objects
 Mechanical impedance and mobility measurements
 Experimental modal analysis
 Educational demonstrations

Model : UITM-18
Vibration Source : Vibration generator capacity 5 New tons.
Power Amplifier : 0 to 10V P to P variable by potentiometer.
: 50 to 1000Hz Variable by potentiometer.
Vibration Sensor : Accelrometer[piezo electric crystal]
Indicator : 4½ digit 16 X 2 line LCD display.
Parameter Displayed : Accelration, Velocity, Displacement and frequency.
Power Supply : 230V ± 10% @ 50 Hz

You might also like